From 137084bbaddf4f6dde948ef3a14e18ba0754cc0d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 07:04:46 -0400 Subject: tty: Fix tty_ldisc_lock name collision The file scope spinlock identifier, tty_ldisc_lock, will collide with the file scope lock function tty_ldisc_lock() so rename it. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 366af83..fa80af3 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -603,7 +603,7 @@ static int tty_signal_session_leader(struct tty_struct *tty, int exit_session) * BTM * redirect lock for undoing redirection * file list lock for manipulating list of ttys - * tty_ldisc_lock from called functions + * tty_ldiscs_lock from called functions * termios_mutex resetting termios data * tasklist_lock to walk task list for hangup event * ->siglock to protect ->signal/->sighand @@ -2202,7 +2202,7 @@ static int tty_fasync(int fd, struct file *filp, int on) * FIXME: does not honour flow control ?? * * Locking: - * Called functions take tty_ldisc_lock + * Called functions take tty_ldiscs_lock * current->signal->tty check is safe without locks * * FIXME: may race normal receive processing diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 1afe192..8166260 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -37,7 +37,7 @@ * callers who will do ldisc lookups and cannot sleep. */ -static DEFINE_RAW_SPINLOCK(tty_ldisc_lock); +static DEFINE_RAW_SPINLOCK(tty_ldiscs_lock); static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait); /* Line disc dispatch table */ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; @@ -52,7 +52,7 @@ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; * from this point onwards. * * Locking: - * takes tty_ldisc_lock to guard against ldisc races + * takes tty_ldiscs_lock to guard against ldisc races */ int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc) @@ -63,11 +63,11 @@ int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc) if (disc < N_TTY || disc >= NR_LDISCS) return -EINVAL; - raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); tty_ldiscs[disc] = new_ldisc; new_ldisc->num = disc; new_ldisc->refcount = 0; - raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); return ret; } @@ -82,7 +82,7 @@ EXPORT_SYMBOL(tty_register_ldisc); * currently in use. * * Locking: - * takes tty_ldisc_lock to guard against ldisc races + * takes tty_ldiscs_lock to guard against ldisc races */ int tty_unregister_ldisc(int disc) @@ -93,12 +93,12 @@ int tty_unregister_ldisc(int disc) if (disc < N_TTY || disc >= NR_LDISCS) return -EINVAL; - raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); if (tty_ldiscs[disc]->refcount) ret = -EBUSY; else tty_ldiscs[disc] = NULL; - raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); return ret; } @@ -109,7 +109,7 @@ static struct tty_ldisc_ops *get_ldops(int disc) unsigned long flags; struct tty_ldisc_ops *ldops, *ret; - raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); ret = ERR_PTR(-EINVAL); ldops = tty_ldiscs[disc]; if (ldops) { @@ -119,7 +119,7 @@ static struct tty_ldisc_ops *get_ldops(int disc) ret = ldops; } } - raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); return ret; } @@ -127,10 +127,10 @@ static void put_ldops(struct tty_ldisc_ops *ldops) { unsigned long flags; - raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); ldops->refcount--; module_put(ldops->owner); - raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); } /** @@ -143,7 +143,7 @@ static void put_ldops(struct tty_ldisc_ops *ldops) * available * * Locking: - * takes tty_ldisc_lock to guard against ldisc races + * takes tty_ldiscs_lock to guard against ldisc races */ static struct tty_ldisc *tty_ldisc_get(int disc) @@ -191,7 +191,7 @@ static inline void tty_ldisc_put(struct tty_ldisc *ld) if (WARN_ON_ONCE(!ld)) return; - raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); /* unreleased reader reference(s) will cause this WARN */ WARN_ON(!atomic_dec_and_test(&ld->users)); @@ -199,7 +199,7 @@ static inline void tty_ldisc_put(struct tty_ldisc *ld) ld->ops->refcount--; module_put(ld->ops->owner); kfree(ld); - raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); } static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) @@ -259,7 +259,7 @@ const struct file_operations tty_ldiscs_proc_fops = { * used to implement both the waiting and non waiting versions * of tty_ldisc_ref * - * Locking: takes tty_ldisc_lock + * Locking: takes tty_ldiscs_lock */ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty) @@ -268,13 +268,13 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty) struct tty_ldisc *ld; /* FIXME: this allows reference acquire after TTY_LDISC is cleared */ - raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); ld = NULL; if (test_bit(TTY_LDISC, &tty->flags) && tty->ldisc) { ld = tty->ldisc; atomic_inc(&ld->users); } - raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); return ld; } @@ -291,7 +291,7 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty) * against a discipline change, such as an existing ldisc reference * (which we check for) * - * Locking: call functions take tty_ldisc_lock + * Locking: call functions take tty_ldiscs_lock */ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) @@ -312,7 +312,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); * reference to it. If the line discipline is in flux then * return NULL. Can be called from IRQ and timer functions. * - * Locking: called functions take tty_ldisc_lock + * Locking: called functions take tty_ldiscs_lock */ struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) @@ -328,7 +328,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref); * Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May * be called in IRQ context. * - * Locking: takes tty_ldisc_lock + * Locking: takes tty_ldiscs_lock */ void tty_ldisc_deref(struct tty_ldisc *ld) @@ -338,13 +338,13 @@ void tty_ldisc_deref(struct tty_ldisc *ld) if (WARN_ON_ONCE(!ld)) return; - raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); /* * WARNs if one-too-many reader references were released * - the last reference must be released with tty_ldisc_put */ WARN_ON(atomic_dec_and_test(&ld->users)); - raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); if (waitqueue_active(&ld->wq_idle)) wake_up(&ld->wq_idle); @@ -593,7 +593,7 @@ static bool tty_ldisc_hangup_halt(struct tty_struct *tty) * overlapping ldisc change (including on the other end of pty pairs), * the close of one side of a tty/pty pair, and eventually hangup. * - * Locking: takes tty_ldisc_lock, termios_mutex + * Locking: takes tty_ldiscs_lock, termios_mutex */ int tty_set_ldisc(struct tty_struct *tty, int ldisc) -- cgit v0.10.2 From d2c438905f9f718b3d9f5d89ce163fc22bd33995 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 07:04:47 -0400 Subject: tty: Add lock/unlock ldisc pair functions Just as the tty pair must be locked in a stable sequence (ie, independent of which is consider the 'other' tty), so must the ldisc pair be locked in a stable sequence as well. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 8166260..418c9f6 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -31,6 +31,13 @@ #define tty_ldisc_debug(tty, f, args...) #endif +/* lockdep nested classes for tty->ldisc_sem */ +enum { + LDISC_SEM_NORMAL, + LDISC_SEM_OTHER, +}; + + /* * This guards the refcounted line discipline lists. The lock * must be taken with irqs off because there are hangup path @@ -351,6 +358,86 @@ void tty_ldisc_deref(struct tty_ldisc *ld) } EXPORT_SYMBOL_GPL(tty_ldisc_deref); + +static inline int __lockfunc +tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout) +{ + return ldsem_down_write(&tty->ldisc_sem, timeout); +} + +static inline int __lockfunc +tty_ldisc_lock_nested(struct tty_struct *tty, unsigned long timeout) +{ + return ldsem_down_write_nested(&tty->ldisc_sem, + LDISC_SEM_OTHER, timeout); +} + +static inline void tty_ldisc_unlock(struct tty_struct *tty) +{ + return ldsem_up_write(&tty->ldisc_sem); +} + +static int __lockfunc +tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2, + unsigned long timeout) +{ + int ret; + + if (tty < tty2) { + ret = tty_ldisc_lock(tty, timeout); + if (ret) { + ret = tty_ldisc_lock_nested(tty2, timeout); + if (!ret) + tty_ldisc_unlock(tty); + } + } else { + /* if this is possible, it has lots of implications */ + WARN_ON_ONCE(tty == tty2); + if (tty2 && tty != tty2) { + ret = tty_ldisc_lock(tty2, timeout); + if (ret) { + ret = tty_ldisc_lock_nested(tty, timeout); + if (!ret) + tty_ldisc_unlock(tty2); + } + } else + ret = tty_ldisc_lock(tty, timeout); + } + + if (!ret) + return -EBUSY; + + set_bit(TTY_LDISC_HALTED, &tty->flags); + if (tty2) + set_bit(TTY_LDISC_HALTED, &tty2->flags); + return 0; +} + +static void __lockfunc +tty_ldisc_lock_pair(struct tty_struct *tty, struct tty_struct *tty2) +{ + tty_ldisc_lock_pair_timeout(tty, tty2, MAX_SCHEDULE_TIMEOUT); +} + +static void __lockfunc tty_ldisc_unlock_pair(struct tty_struct *tty, + struct tty_struct *tty2) +{ + tty_ldisc_unlock(tty); + if (tty2) + tty_ldisc_unlock(tty2); +} + +static void __lockfunc tty_ldisc_enable_pair(struct tty_struct *tty, + struct tty_struct *tty2) +{ + clear_bit(TTY_LDISC_HALTED, &tty->flags); + if (tty2) + clear_bit(TTY_LDISC_HALTED, &tty2->flags); + + tty_ldisc_unlock_pair(tty, tty2); +} + + /** * tty_ldisc_enable - allow ldisc use * @tty: terminal to activate ldisc on -- cgit v0.10.2 From 36697529b5bbe36911e39a6309e7a7c9250d280a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 07:04:48 -0400 Subject: tty: Replace ldisc locking with ldisc_sem Line discipline locking was performed with a combination of a mutex, a status bit, a count, and a waitqueue -- basically, a rw semaphore. Replace the existing combination with an ld_semaphore. Fixes: 1) the 'reference acquire after ldisc locked' bug 2) the over-complicated halt mechanism 3) lock order wrt. tty_lock() 4) dropping locks while changing ldisc 5) previously unidentified deadlock while locking ldisc from both linked ttys concurrently 6) previously unidentified recursive deadlocks Adds much-needed lockdep diagnostics. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 9121c1f..a42a028 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -429,7 +429,7 @@ static void flush_to_ldisc(struct work_struct *work) return; disc = tty_ldisc_ref(tty); - if (disc == NULL) /* !TTY_LDISC */ + if (disc == NULL) return; spin_lock_irqsave(&buf->lock, flags); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index fa80af3..0fa5db4 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1388,8 +1388,7 @@ static int tty_reopen(struct tty_struct *tty) struct tty_driver *driver = tty->driver; if (test_bit(TTY_CLOSING, &tty->flags) || - test_bit(TTY_HUPPING, &tty->flags) || - test_bit(TTY_LDISC_CHANGING, &tty->flags)) + test_bit(TTY_HUPPING, &tty->flags)) return -EIO; if (driver->type == TTY_DRIVER_TYPE_PTY && @@ -1405,7 +1404,7 @@ static int tty_reopen(struct tty_struct *tty) } tty->count++; - WARN_ON(!test_bit(TTY_LDISC, &tty->flags)); + WARN_ON(!tty->ldisc); return 0; } @@ -3017,7 +3016,7 @@ void initialize_tty_struct(struct tty_struct *tty, tty->pgrp = NULL; mutex_init(&tty->legacy_mutex); mutex_init(&tty->termios_mutex); - mutex_init(&tty->ldisc_mutex); + init_ldsem(&tty->ldisc_sem); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); INIT_WORK(&tty->hangup_work, do_tty_hangup); diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 418c9f6..b7b8048 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -45,7 +45,6 @@ enum { */ static DEFINE_RAW_SPINLOCK(tty_ldiscs_lock); -static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait); /* Line disc dispatch table */ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; @@ -153,7 +152,7 @@ static void put_ldops(struct tty_ldisc_ops *ldops) * takes tty_ldiscs_lock to guard against ldisc races */ -static struct tty_ldisc *tty_ldisc_get(int disc) +static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc) { struct tty_ldisc *ld; struct tty_ldisc_ops *ldops; @@ -180,8 +179,7 @@ static struct tty_ldisc *tty_ldisc_get(int disc) } ld->ops = ldops; - atomic_set(&ld->users, 1); - init_waitqueue_head(&ld->wq_idle); + ld->tty = tty; return ld; } @@ -193,20 +191,11 @@ static struct tty_ldisc *tty_ldisc_get(int disc) */ static inline void tty_ldisc_put(struct tty_ldisc *ld) { - unsigned long flags; - if (WARN_ON_ONCE(!ld)) return; - raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); - - /* unreleased reader reference(s) will cause this WARN */ - WARN_ON(!atomic_dec_and_test(&ld->users)); - - ld->ops->refcount--; - module_put(ld->ops->owner); + put_ldops(ld->ops); kfree(ld); - raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); } static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) @@ -258,34 +247,6 @@ const struct file_operations tty_ldiscs_proc_fops = { }; /** - * tty_ldisc_try - internal helper - * @tty: the tty - * - * Make a single attempt to grab and bump the refcount on - * the tty ldisc. Return 0 on failure or 1 on success. This is - * used to implement both the waiting and non waiting versions - * of tty_ldisc_ref - * - * Locking: takes tty_ldiscs_lock - */ - -static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty) -{ - unsigned long flags; - struct tty_ldisc *ld; - - /* FIXME: this allows reference acquire after TTY_LDISC is cleared */ - raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); - ld = NULL; - if (test_bit(TTY_LDISC, &tty->flags) && tty->ldisc) { - ld = tty->ldisc; - atomic_inc(&ld->users); - } - raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); - return ld; -} - -/** * tty_ldisc_ref_wait - wait for the tty ldisc * @tty: tty device * @@ -298,16 +259,15 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty) * against a discipline change, such as an existing ldisc reference * (which we check for) * - * Locking: call functions take tty_ldiscs_lock + * Note: only callable from a file_operations routine (which + * guarantees tty->ldisc != NULL when the lock is acquired). */ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { - struct tty_ldisc *ld; - - /* wait_event is a macro */ - wait_event(tty_ldisc_wait, (ld = tty_ldisc_try(tty)) != NULL); - return ld; + ldsem_down_read(&tty->ldisc_sem, MAX_SCHEDULE_TIMEOUT); + WARN_ON(!tty->ldisc); + return tty->ldisc; } EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); @@ -318,13 +278,18 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); * Dereference the line discipline for the terminal and take a * reference to it. If the line discipline is in flux then * return NULL. Can be called from IRQ and timer functions. - * - * Locking: called functions take tty_ldiscs_lock */ struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) { - return tty_ldisc_try(tty); + struct tty_ldisc *ld = NULL; + + if (ldsem_down_read_trylock(&tty->ldisc_sem)) { + ld = tty->ldisc; + if (!ld) + ldsem_up_read(&tty->ldisc_sem); + } + return ld; } EXPORT_SYMBOL_GPL(tty_ldisc_ref); @@ -334,27 +299,11 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref); * * Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May * be called in IRQ context. - * - * Locking: takes tty_ldiscs_lock */ void tty_ldisc_deref(struct tty_ldisc *ld) { - unsigned long flags; - - if (WARN_ON_ONCE(!ld)) - return; - - raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); - /* - * WARNs if one-too-many reader references were released - * - the last reference must be released with tty_ldisc_put - */ - WARN_ON(atomic_dec_and_test(&ld->users)); - raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); - - if (waitqueue_active(&ld->wq_idle)) - wake_up(&ld->wq_idle); + ldsem_up_read(&ld->tty->ldisc_sem); } EXPORT_SYMBOL_GPL(tty_ldisc_deref); @@ -437,27 +386,6 @@ static void __lockfunc tty_ldisc_enable_pair(struct tty_struct *tty, tty_ldisc_unlock_pair(tty, tty2); } - -/** - * tty_ldisc_enable - allow ldisc use - * @tty: terminal to activate ldisc on - * - * Set the TTY_LDISC flag when the line discipline can be called - * again. Do necessary wakeups for existing sleepers. Clear the LDISC - * changing flag to indicate any ldisc change is now over. - * - * Note: nobody should set the TTY_LDISC bit except via this function. - * Clearing directly is allowed. - */ - -static void tty_ldisc_enable(struct tty_struct *tty) -{ - clear_bit(TTY_LDISC_HALTED, &tty->flags); - set_bit(TTY_LDISC, &tty->flags); - clear_bit(TTY_LDISC_CHANGING, &tty->flags); - wake_up(&tty_ldisc_wait); -} - /** * tty_ldisc_flush - flush line discipline queue * @tty: tty @@ -555,14 +483,14 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) int r; /* There is an outstanding reference here so this is safe */ - old = tty_ldisc_get(old->ops->num); + old = tty_ldisc_get(tty, old->ops->num); WARN_ON(IS_ERR(old)); tty->ldisc = old; tty_set_termios_ldisc(tty, old->ops->num); if (tty_ldisc_open(tty, old) < 0) { tty_ldisc_put(old); /* This driver is always present */ - new_ldisc = tty_ldisc_get(N_TTY); + new_ldisc = tty_ldisc_get(tty, N_TTY); if (IS_ERR(new_ldisc)) panic("n_tty: get"); tty->ldisc = new_ldisc; @@ -576,101 +504,6 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) } /** - * tty_ldisc_wait_idle - wait for the ldisc to become idle - * @tty: tty to wait for - * @timeout: for how long to wait at most - * - * Wait for the line discipline to become idle. The discipline must - * have been halted for this to guarantee it remains idle. - */ -static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout) -{ - long ret; - ret = wait_event_timeout(tty->ldisc->wq_idle, - atomic_read(&tty->ldisc->users) == 1, timeout); - return ret > 0 ? 0 : -EBUSY; -} - -/** - * tty_ldisc_halt - shut down the line discipline - * @tty: tty device - * @o_tty: paired pty device (can be NULL) - * @timeout: # of jiffies to wait for ldisc refs to be released - * - * Shut down the line discipline and work queue for this tty device and - * its paired pty (if exists). Clearing the TTY_LDISC flag ensures - * no further references can be obtained, while waiting for existing - * references to be released ensures no more data is fed to the ldisc. - * - * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex) - * in order to make sure any currently executing ldisc work is also - * flushed. - */ - -static int tty_ldisc_halt(struct tty_struct *tty, struct tty_struct *o_tty, - long timeout) -{ - int retval; - - clear_bit(TTY_LDISC, &tty->flags); - if (o_tty) - clear_bit(TTY_LDISC, &o_tty->flags); - - retval = tty_ldisc_wait_idle(tty, timeout); - if (!retval && o_tty) - retval = tty_ldisc_wait_idle(o_tty, timeout); - if (retval) - return retval; - - set_bit(TTY_LDISC_HALTED, &tty->flags); - if (o_tty) - set_bit(TTY_LDISC_HALTED, &o_tty->flags); - - return 0; -} - -/** - * tty_ldisc_hangup_halt - halt the line discipline for hangup - * @tty: tty being hung up - * - * Shut down the line discipline and work queue for the tty device - * being hungup. Clear the TTY_LDISC flag to ensure no further - * references can be obtained and wait for remaining references to be - * released to ensure no more data is fed to this ldisc. - * Caller must hold legacy and ->ldisc_mutex. - * - * NB: tty_set_ldisc() is prevented from changing the ldisc concurrently - * with this function by checking the TTY_HUPPING flag. - */ -static bool tty_ldisc_hangup_halt(struct tty_struct *tty) -{ - char cur_n[TASK_COMM_LEN], tty_n[64]; - long timeout = 3 * HZ; - - clear_bit(TTY_LDISC, &tty->flags); - - if (tty->ldisc) { /* Not yet closed */ - tty_unlock(tty); - - while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) { - timeout = MAX_SCHEDULE_TIMEOUT; - printk_ratelimited(KERN_WARNING - "%s: waiting (%s) for %s took too long, but we keep waiting...\n", - __func__, get_task_comm(cur_n, current), - tty_name(tty, tty_n)); - } - - set_bit(TTY_LDISC_HALTED, &tty->flags); - - /* must reacquire both locks and preserve lock order */ - mutex_unlock(&tty->ldisc_mutex); - tty_lock(tty); - mutex_lock(&tty->ldisc_mutex); - } - return !!tty->ldisc; -} - -/** * tty_set_ldisc - set line discipline * @tty: the terminal to set * @ldisc: the line discipline @@ -679,103 +512,47 @@ static bool tty_ldisc_hangup_halt(struct tty_struct *tty) * context. The ldisc change logic has to protect itself against any * overlapping ldisc change (including on the other end of pty pairs), * the close of one side of a tty/pty pair, and eventually hangup. - * - * Locking: takes tty_ldiscs_lock, termios_mutex */ int tty_set_ldisc(struct tty_struct *tty, int ldisc) { int retval; struct tty_ldisc *o_ldisc, *new_ldisc; - struct tty_struct *o_tty; + struct tty_struct *o_tty = tty->link; - new_ldisc = tty_ldisc_get(ldisc); + new_ldisc = tty_ldisc_get(tty, ldisc); if (IS_ERR(new_ldisc)) return PTR_ERR(new_ldisc); - tty_lock(tty); - /* - * We need to look at the tty locking here for pty/tty pairs - * when both sides try to change in parallel. - */ - - o_tty = tty->link; /* o_tty is the pty side or NULL */ - + retval = tty_ldisc_lock_pair_timeout(tty, o_tty, 5 * HZ); + if (retval) { + tty_ldisc_put(new_ldisc); + return retval; + } /* * Check the no-op case */ if (tty->ldisc->ops->num == ldisc) { - tty_unlock(tty); + tty_ldisc_enable_pair(tty, o_tty); tty_ldisc_put(new_ldisc); return 0; } - mutex_lock(&tty->ldisc_mutex); - - /* - * We could be midstream of another ldisc change which has - * dropped the lock during processing. If so we need to wait. - */ - - while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { - mutex_unlock(&tty->ldisc_mutex); - tty_unlock(tty); - wait_event(tty_ldisc_wait, - test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); - tty_lock(tty); - mutex_lock(&tty->ldisc_mutex); - } - - set_bit(TTY_LDISC_CHANGING, &tty->flags); - - /* - * No more input please, we are switching. The new ldisc - * will update this value in the ldisc open function - */ - + /* FIXME: why 'shutoff' input if the ldisc is locked? */ tty->receive_room = 0; o_ldisc = tty->ldisc; - - tty_unlock(tty); - /* - * Make sure we don't change while someone holds a - * reference to the line discipline. The TTY_LDISC bit - * prevents anyone taking a reference once it is clear. - * We need the lock to avoid racing reference takers. - * - * We must clear the TTY_LDISC bit here to avoid a livelock - * with a userspace app continually trying to use the tty in - * parallel to the change and re-referencing the tty. - */ - - retval = tty_ldisc_halt(tty, o_tty, 5 * HZ); - - /* - * Wait for hangup to complete, if pending. - * We must drop the mutex here in case a hangup is also in process. - */ - - mutex_unlock(&tty->ldisc_mutex); - - flush_work(&tty->hangup_work); - tty_lock(tty); - mutex_lock(&tty->ldisc_mutex); - /* handle wait idle failure locked */ - if (retval) { - tty_ldisc_put(new_ldisc); - goto enable; - } + /* FIXME: for testing only */ + WARN_ON(test_bit(TTY_HUPPED, &tty->flags)); if (test_bit(TTY_HUPPING, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ - clear_bit(TTY_LDISC_CHANGING, &tty->flags); - mutex_unlock(&tty->ldisc_mutex); + tty_ldisc_enable_pair(tty, o_tty); tty_ldisc_put(new_ldisc); tty_unlock(tty); return -EIO; @@ -804,14 +581,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_ldisc_put(o_ldisc); -enable: /* * Allow ldisc referencing to occur again */ - - tty_ldisc_enable(tty); - if (o_tty) - tty_ldisc_enable(o_tty); + tty_ldisc_enable_pair(tty, o_tty); /* Restart the work queue in case no characters kick it off. Safe if already running */ @@ -819,7 +592,6 @@ enable: if (o_tty) schedule_work(&o_tty->port->buf.work); - mutex_unlock(&tty->ldisc_mutex); tty_unlock(tty); return retval; } @@ -852,7 +624,7 @@ static void tty_reset_termios(struct tty_struct *tty) static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) { - struct tty_ldisc *ld = tty_ldisc_get(ldisc); + struct tty_ldisc *ld = tty_ldisc_get(tty, ldisc); if (IS_ERR(ld)) return -1; @@ -891,14 +663,8 @@ void tty_ldisc_hangup(struct tty_struct *tty) tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc); - /* - * FIXME! What are the locking issues here? This may me overdoing - * things... This question is especially important now that we've - * removed the irqlock. - */ ld = tty_ldisc_ref(tty); if (ld != NULL) { - /* We may have no line discipline at this point */ if (ld->ops->flush_buffer) ld->ops->flush_buffer(tty); tty_driver_flush_buffer(tty); @@ -909,21 +675,22 @@ void tty_ldisc_hangup(struct tty_struct *tty) ld->ops->hangup(tty); tty_ldisc_deref(ld); } - /* - * FIXME: Once we trust the LDISC code better we can wait here for - * ldisc completion and fix the driver call race - */ + wake_up_interruptible_poll(&tty->write_wait, POLLOUT); wake_up_interruptible_poll(&tty->read_wait, POLLIN); + + tty_unlock(tty); + /* * Shutdown the current line discipline, and reset it to * N_TTY if need be. * * Avoid racing set_ldisc or tty_ldisc_release */ - mutex_lock(&tty->ldisc_mutex); + tty_ldisc_lock_pair(tty, tty->link); + tty_lock(tty); - if (tty_ldisc_hangup_halt(tty)) { + if (tty->ldisc) { /* At this point we have a halted ldisc; we want to close it and reopen a new ldisc. We could defer the reopen to the next @@ -942,9 +709,8 @@ void tty_ldisc_hangup(struct tty_struct *tty) BUG_ON(tty_ldisc_reinit(tty, N_TTY)); WARN_ON(tty_ldisc_open(tty, tty->ldisc)); } - tty_ldisc_enable(tty); } - mutex_unlock(&tty->ldisc_mutex); + tty_ldisc_enable_pair(tty, tty->link); if (reset) tty_reset_termios(tty); @@ -976,15 +742,12 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_close(tty, ld); return retval; } - tty_ldisc_enable(o_tty); } - tty_ldisc_enable(tty); return 0; } static void tty_ldisc_kill(struct tty_struct *tty) { - mutex_lock(&tty->ldisc_mutex); /* * Now kill off the ldisc */ @@ -995,7 +758,6 @@ static void tty_ldisc_kill(struct tty_struct *tty) /* Ensure the next open requests the N_TTY ldisc */ tty_set_termios_ldisc(tty, N_TTY); - mutex_unlock(&tty->ldisc_mutex); } /** @@ -1017,15 +779,16 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc); - tty_ldisc_halt(tty, o_tty, MAX_SCHEDULE_TIMEOUT); - + tty_ldisc_lock_pair(tty, o_tty); tty_lock_pair(tty, o_tty); - /* This will need doing differently if we need to lock */ + tty_ldisc_kill(tty); if (o_tty) tty_ldisc_kill(o_tty); tty_unlock_pair(tty, o_tty); + tty_ldisc_unlock_pair(tty, o_tty); + /* And the memory resources remaining (buffers, termios) will be disposed of when the kref hits zero */ @@ -1042,7 +805,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) void tty_ldisc_init(struct tty_struct *tty) { - struct tty_ldisc *ld = tty_ldisc_get(N_TTY); + struct tty_ldisc *ld = tty_ldisc_get(tty, N_TTY); if (IS_ERR(ld)) panic("n_tty: init_tty"); tty->ldisc = ld; diff --git a/include/linux/tty.h b/include/linux/tty.h index 01ac30e..7269daf 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -238,7 +238,7 @@ struct tty_struct { int index; /* Protects ldisc changes: Lock tty not pty */ - struct mutex ldisc_mutex; + struct ld_semaphore ldisc_sem; struct tty_ldisc *ldisc; struct mutex atomic_write_lock; @@ -305,8 +305,6 @@ struct tty_file_private { #define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */ #define TTY_PUSH 6 /* n_tty private */ #define TTY_CLOSING 7 /* ->close() in progress */ -#define TTY_LDISC 9 /* Line discipline attached */ -#define TTY_LDISC_CHANGING 10 /* Line discipline changing */ #define TTY_LDISC_OPEN 11 /* Line discipline is open */ #define TTY_PTY_LOCK 16 /* pty private */ #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index a1b0489..23bdd9d 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -203,8 +203,7 @@ struct tty_ldisc_ops { struct tty_ldisc { struct tty_ldisc_ops *ops; - atomic_t users; - wait_queue_head_t wq_idle; + struct tty_struct *tty; }; #define TTY_LDISC_MAGIC 0x5403 -- cgit v0.10.2 From 9fbfa34c18b31978bf6bab26148f84d7a4b3ccea Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 07:04:49 -0400 Subject: tty: Clarify ldisc variable Rename o_ldisc to avoid confusion with the ldisc of the 'other' tty. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index b7b8048..31bd45a 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -517,7 +517,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) int tty_set_ldisc(struct tty_struct *tty, int ldisc) { int retval; - struct tty_ldisc *o_ldisc, *new_ldisc; + struct tty_ldisc *old_ldisc, *new_ldisc; struct tty_struct *o_tty = tty->link; new_ldisc = tty_ldisc_get(tty, ldisc); @@ -543,7 +543,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) /* FIXME: why 'shutoff' input if the ldisc is locked? */ tty->receive_room = 0; - o_ldisc = tty->ldisc; + old_ldisc = tty->ldisc; tty_lock(tty); /* FIXME: for testing only */ @@ -558,8 +558,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) return -EIO; } - /* Shutdown the current discipline. */ - tty_ldisc_close(tty, o_ldisc); + /* Shutdown the old discipline. */ + tty_ldisc_close(tty, old_ldisc); /* Now set up the new line discipline. */ tty->ldisc = new_ldisc; @@ -569,17 +569,17 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (retval < 0) { /* Back to the old one or N_TTY if we can't */ tty_ldisc_put(new_ldisc); - tty_ldisc_restore(tty, o_ldisc); + tty_ldisc_restore(tty, old_ldisc); } /* At this point we hold a reference to the new ldisc and a a reference to the old ldisc. If we ended up flipping back to the existing ldisc we have two references to it */ - if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc) + if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc) tty->ops->set_ldisc(tty); - tty_ldisc_put(o_ldisc); + tty_ldisc_put(old_ldisc); /* * Allow ldisc referencing to occur again -- cgit v0.10.2 From e97733ca677878d0ecf08af17f4661eb83e268bc Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 07:04:50 -0400 Subject: tty: Fix hangup race with TIOCSETD ioctl The hangup may already have happened; check for that state also. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 31bd45a..5819667 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -546,10 +546,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) old_ldisc = tty->ldisc; tty_lock(tty); - /* FIXME: for testing only */ - WARN_ON(test_bit(TTY_HUPPED, &tty->flags)); - - if (test_bit(TTY_HUPPING, &tty->flags)) { + if (test_bit(TTY_HUPPING, &tty->flags) || + test_bit(TTY_HUPPED, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ tty_ldisc_enable_pair(tty, o_tty); -- cgit v0.10.2 From b0e95858238d95f32edf00ff4a0375165129d0c6 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 07:04:51 -0400 Subject: tty: Clarify multiple-references comment in TIOCSETD ioctl Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 5819667..75fa999 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -570,13 +570,15 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_ldisc_restore(tty, old_ldisc); } - /* At this point we hold a reference to the new ldisc and a - a reference to the old ldisc. If we ended up flipping back - to the existing ldisc we have two references to it */ - if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc) tty->ops->set_ldisc(tty); + /* At this point we hold a reference to the new ldisc and a + reference to the old ldisc, or we hold two references to + the old ldisc (if it was restored as part of error cleanup + above). In either case, releasing a single reference from + the old ldisc is correct. */ + tty_ldisc_put(old_ldisc); /* -- cgit v0.10.2 From 3b80df7ca7e2fec76be2eda304cc7e0eb90f911d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:13 -0400 Subject: tty: Don't change receive_room for ioctl(TIOCSETD) tty_set_ldisc() is guaranteed exclusive use of the line discipline by tty_ldisc_lock_pair_timeout(); shutting off input by resetting receive_room is unnecessary. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 75fa999..e52d615 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -540,9 +540,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) return 0; } - /* FIXME: why 'shutoff' input if the ldisc is locked? */ - tty->receive_room = 0; - old_ldisc = tty->ldisc; tty_lock(tty); -- cgit v0.10.2 From da261e7fe7b0e23a0d4d46039d20dc60fa197b49 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:14 -0400 Subject: tty: Simplify tty buffer/ldisc interface with helper function Ldisc interface functions must be called with interrupts enabled. Separating the ldisc calls into a helper function simplies the eventual removal of the spinlock. Note that access to the buf->head ptr outside the spinlock is safe here because; * __tty_buffer_flush() is prevented from running while buffer work performs i/o, * tty_buffer_find() only assigns buf->head if the flip buffer list is empty (which is never the case in flush_to_ldisc() since at least one buffer is always left in the list after use) Access to the read index outside the spinlock is safe here for the same reasons. Update the buffer's read index _after_ the data has been received by the ldisc. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index a42a028..6c7a1d0 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -403,6 +403,18 @@ int tty_prepare_flip_string_flags(struct tty_port *port, EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags); +static int +receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count) +{ + struct tty_ldisc *disc = tty->ldisc; + + count = min_t(int, count, tty->receive_room); + if (count) + disc->ops->receive_buf(tty, head->char_buf_ptr + head->read, + head->flag_buf_ptr + head->read, count); + head->read += count; + return count; +} /** * flush_to_ldisc @@ -438,8 +450,6 @@ static void flush_to_ldisc(struct work_struct *work) struct tty_buffer *head; while ((head = buf->head) != NULL) { int count; - char *char_buf; - unsigned char *flag_buf; count = head->commit - head->read; if (!count) { @@ -449,16 +459,10 @@ static void flush_to_ldisc(struct work_struct *work) tty_buffer_free(port, head); continue; } - if (!tty->receive_room) - break; - if (count > tty->receive_room) - count = tty->receive_room; - char_buf = head->char_buf_ptr + head->read; - flag_buf = head->flag_buf_ptr + head->read; - head->read += count; spin_unlock_irqrestore(&buf->lock, flags); - disc->ops->receive_buf(tty, char_buf, - flag_buf, count); + + count = receive_buf(tty, head, count); + spin_lock_irqsave(&buf->lock, flags); /* Ldisc or user is trying to flush the buffers. We may have a deferred request to flush the @@ -469,7 +473,8 @@ static void flush_to_ldisc(struct work_struct *work) clear_bit(TTYP_FLUSHPENDING, &port->iflags); wake_up(&tty->read_wait); break; - } + } else if (!count) + break; } clear_bit(TTYP_FLUSHING, &port->iflags); } -- cgit v0.10.2 From 24a89d1cb69b6c488cf16d98dd02e7820f62b40c Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:15 -0400 Subject: tty: Make ldisc input flow control concurrency-friendly Although line discipline receiving is single-producer/single-consumer, using tty->receive_room to manage flow control creates unnecessary critical regions requiring additional lock use. Instead, introduce the optional .receive_buf2() ldisc method which returns the # of bytes actually received. Serialization is guaranteed by the caller. In turn, the line discipline should schedule the buffer work item whenever space becomes available; ie., when there is room to receive data and receive_room() previously returned 0 (the buffer work item stops processing if receive_buf2() returns 0). Note the 'no room' state need not be atomic despite concurrent use by two threads because only the buffer work thread can set the state and only the read() thread can clear the state. Add n_tty_receive_buf2() as the receive_buf2() method for N_TTY. Provide a public helper function, tty_ldisc_receive_buf(), to use when directly accessing the receive_buf() methods. Line disciplines not using input flow control can continue to set tty->receive_room to a fixed value and only provide the receive_buf() method. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 4bf0fc0..eddeb78 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -79,6 +79,9 @@ struct n_tty_data { unsigned long overrun_time; int num_overrun; + /* non-atomic */ + bool no_room; + unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; unsigned char echo_overrun:1; @@ -114,25 +117,10 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, return put_user(x, ptr); } -/** - * n_tty_set_room - receive space - * @tty: terminal - * - * Updates tty->receive_room to reflect the currently available space - * in the input buffer, and re-schedules the flip buffer work if space - * just became available. - * - * Locks: Concurrent update is protected with read_lock - */ - -static int set_room(struct tty_struct *tty) +static int receive_room(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; int left; - int old_left; - unsigned long flags; - - raw_spin_lock_irqsave(&ldata->read_lock, flags); if (I_PARMRK(tty)) { /* Multiply read_cnt by 3, since each byte might take up to @@ -150,18 +138,27 @@ static int set_room(struct tty_struct *tty) */ if (left <= 0) left = ldata->icanon && !ldata->canon_data; - old_left = tty->receive_room; - tty->receive_room = left; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); - - return left && !old_left; + return left; } +/** + * n_tty_set_room - receive space + * @tty: terminal + * + * Re-schedules the flip buffer work if space just became available. + * + * Locks: Concurrent update is protected with read_lock + */ + static void n_tty_set_room(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; + /* Did this open up the receive buffer? We may need to flip */ - if (set_room(tty)) { + if (unlikely(ldata->no_room) && receive_room(tty)) { + ldata->no_room = 0; + WARN_RATELIMIT(tty->port->itty == NULL, "scheduling with invalid itty\n"); /* see if ldisc has been killed - if so, this means that @@ -1408,8 +1405,8 @@ static void n_tty_write_wakeup(struct tty_struct *tty) * calls one at a time and in order (or using flush_to_ldisc) */ -static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) +static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; const unsigned char *p; @@ -1464,8 +1461,6 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, tty->ops->flush_chars(tty); } - set_room(tty); - if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); @@ -1480,7 +1475,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, */ while (1) { tty_set_flow_change(tty, TTY_THROTTLE_SAFE); - if (tty->receive_room >= TTY_THRESHOLD_THROTTLE) + if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE) break; if (!tty_throttle_safe(tty)) break; @@ -1488,6 +1483,28 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, __tty_set_flow_change(tty, 0); } +static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + __receive_buf(tty, cp, fp, count); +} + +static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + int room; + + tty->receive_room = room = receive_room(tty); + if (!room) + ldata->no_room = 1; + count = min(count, room); + if (count) + __receive_buf(tty, cp, fp, count); + + return count; +} + int is_ignored(int sig) { return (sigismember(¤t->blocked, sig) || @@ -2203,6 +2220,7 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = { .receive_buf = n_tty_receive_buf, .write_wakeup = n_tty_write_wakeup, .fasync = n_tty_fasync, + .receive_buf2 = n_tty_receive_buf2, }; /** diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 6c7a1d0..ff1b2e3 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -407,11 +407,16 @@ static int receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count) { struct tty_ldisc *disc = tty->ldisc; + char *p = head->char_buf_ptr + head->read; + unsigned char *f = head->flag_buf_ptr + head->read; - count = min_t(int, count, tty->receive_room); - if (count) - disc->ops->receive_buf(tty, head->char_buf_ptr + head->read, - head->flag_buf_ptr + head->read, count); + if (disc->ops->receive_buf2) + count = disc->ops->receive_buf2(tty, p, f, count); + else { + count = min_t(int, count, tty->receive_room); + if (count) + disc->ops->receive_buf(tty, p, f, count); + } head->read += count; return count; } diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 60b7b69..2ca8d6b 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -356,8 +356,8 @@ int paste_selection(struct tty_struct *tty) continue; } count = sel_buffer_lth - pasted; - count = min(count, tty->receive_room); - ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count); + count = tty_ldisc_receive_buf(ld, sel_buffer + pasted, NULL, + count); pasted += count; } remove_wait_queue(&vc->paste_wait, &wait); diff --git a/include/linux/tty.h b/include/linux/tty.h index 7269daf..8323ee4 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -557,6 +557,19 @@ extern void tty_ldisc_init(struct tty_struct *tty); extern void tty_ldisc_deinit(struct tty_struct *tty); extern void tty_ldisc_begin(void); +static inline int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p, + char *f, int count) +{ + if (ld->ops->receive_buf2) + count = ld->ops->receive_buf2(ld->tty, p, f, count); + else { + count = min_t(int, count, ld->tty->receive_room); + if (count) + ld->ops->receive_buf(ld->tty, p, f, count); + } + return count; +} + /* n_tty.c */ extern struct tty_ldisc_ops tty_ldisc_N_TTY; diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 23bdd9d..f15c898 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -109,6 +109,17 @@ * * Tells the discipline that the DCD pin has changed its status. * Used exclusively by the N_PPS (Pulse-Per-Second) line discipline. + * + * int (*receive_buf2)(struct tty_struct *, const unsigned char *cp, + * char *fp, int count); + * + * This function is called by the low-level tty driver to send + * characters received by the hardware to the line discpline for + * processing. is a pointer to the buffer of input + * character received by the device. is a pointer to a + * pointer of flag bytes which indicate whether a character was + * received with a parity error, etc. + * If assigned, prefer this function for automatic flow control. */ #include @@ -195,6 +206,8 @@ struct tty_ldisc_ops { void (*write_wakeup)(struct tty_struct *); void (*dcd_change)(struct tty_struct *, unsigned int); void (*fasync)(struct tty_struct *tty, int on); + int (*receive_buf2)(struct tty_struct *, const unsigned char *cp, + char *fp, int count); struct module *owner; -- cgit v0.10.2 From 88bb0de389a464521034e87816e5d6c7c489a664 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:16 -0400 Subject: n_tty: Factor canonical mode copy from n_tty_read() Simplify n_tty_read(); extract complex copy algorithm into separate function, canon_copy_to_user(). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index eddeb78..7fd7774 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1747,6 +1747,62 @@ static int copy_from_read_buf(struct tty_struct *tty, return retval; } +/** + * canon_copy_to_user - copy read data in canonical mode + * @tty: terminal device + * @b: user data + * @nr: size of data + * + * Helper function for n_tty_read. It is only called when ICANON is on; + * it copies characters one at a time from the read buffer to the user + * space buffer. + * + * Called under the atomic_read_lock mutex + */ + +static int canon_copy_to_user(struct tty_struct *tty, + unsigned char __user **b, + size_t *nr) +{ + struct n_tty_data *ldata = tty->disc_data; + unsigned long flags; + int eol, c; + + /* N.B. avoid overrun if nr == 0 */ + raw_spin_lock_irqsave(&ldata->read_lock, flags); + while (*nr && ldata->read_cnt) { + + eol = test_and_clear_bit(ldata->read_tail, ldata->read_flags); + c = ldata->read_buf[ldata->read_tail]; + ldata->read_tail = (ldata->read_tail+1) & (N_TTY_BUF_SIZE-1); + ldata->read_cnt--; + if (eol) { + /* this test should be redundant: + * we shouldn't be reading data if + * canon_data is 0 + */ + if (--ldata->canon_data < 0) + ldata->canon_data = 0; + } + raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + + if (!eol || (c != __DISABLED_CHAR)) { + if (tty_put_user(tty, c, *b)) + return -EFAULT; + *b += 1; + *nr -= 1; + } + if (eol) { + tty_audit_push(tty); + return 0; + } + raw_spin_lock_irqsave(&ldata->read_lock, flags); + } + raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + + return 0; +} + extern ssize_t redirected_tty_write(struct file *, const char __user *, size_t, loff_t *); @@ -1916,44 +1972,7 @@ do_it_again: } if (ldata->icanon && !L_EXTPROC(tty)) { - /* N.B. avoid overrun if nr == 0 */ - raw_spin_lock_irqsave(&ldata->read_lock, flags); - while (nr && ldata->read_cnt) { - int eol; - - eol = test_and_clear_bit(ldata->read_tail, - ldata->read_flags); - c = ldata->read_buf[ldata->read_tail]; - ldata->read_tail = ((ldata->read_tail+1) & - (N_TTY_BUF_SIZE-1)); - ldata->read_cnt--; - if (eol) { - /* this test should be redundant: - * we shouldn't be reading data if - * canon_data is 0 - */ - if (--ldata->canon_data < 0) - ldata->canon_data = 0; - } - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); - - if (!eol || (c != __DISABLED_CHAR)) { - if (tty_put_user(tty, c, b++)) { - retval = -EFAULT; - b--; - raw_spin_lock_irqsave(&ldata->read_lock, flags); - break; - } - nr--; - } - if (eol) { - tty_audit_push(tty); - raw_spin_lock_irqsave(&ldata->read_lock, flags); - break; - } - raw_spin_lock_irqsave(&ldata->read_lock, flags); - } - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + retval = canon_copy_to_user(tty, &b, &nr); if (retval) break; } else { -- cgit v0.10.2 From 32f13521ca68bc624ff6effc77f308a52b038bf0 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:17 -0400 Subject: n_tty: Line copy to user buffer in canonical mode Instead of pushing one char per loop, pre-compute the data length to copy and copy all at once. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 7fd7774..74dcedd 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -74,6 +74,13 @@ #define ECHO_OP_SET_CANON_COL 0x81 #define ECHO_OP_ERASE_TAB 0x82 +#undef N_TTY_TRACE +#ifdef N_TTY_TRACE +# define n_tty_trace(f, args...) trace_printk(f, ##args) +#else +# define n_tty_trace(f, args...) +#endif + struct n_tty_data { unsigned int column; unsigned long overrun_time; @@ -1748,58 +1755,95 @@ static int copy_from_read_buf(struct tty_struct *tty, } /** - * canon_copy_to_user - copy read data in canonical mode + * canon_copy_from_read_buf - copy read data in canonical mode * @tty: terminal device * @b: user data * @nr: size of data * * Helper function for n_tty_read. It is only called when ICANON is on; - * it copies characters one at a time from the read buffer to the user - * space buffer. + * it copies one line of input up to and including the line-delimiting + * character into the user-space buffer. * * Called under the atomic_read_lock mutex */ -static int canon_copy_to_user(struct tty_struct *tty, - unsigned char __user **b, - size_t *nr) +static int canon_copy_from_read_buf(struct tty_struct *tty, + unsigned char __user **b, + size_t *nr) { struct n_tty_data *ldata = tty->disc_data; unsigned long flags; - int eol, c; + size_t n, size, more, c; + unsigned long eol; + int ret, tail, found = 0; /* N.B. avoid overrun if nr == 0 */ + raw_spin_lock_irqsave(&ldata->read_lock, flags); - while (*nr && ldata->read_cnt) { - - eol = test_and_clear_bit(ldata->read_tail, ldata->read_flags); - c = ldata->read_buf[ldata->read_tail]; - ldata->read_tail = (ldata->read_tail+1) & (N_TTY_BUF_SIZE-1); - ldata->read_cnt--; - if (eol) { - /* this test should be redundant: - * we shouldn't be reading data if - * canon_data is 0 - */ - if (--ldata->canon_data < 0) - ldata->canon_data = 0; - } + + n = min_t(size_t, *nr, ldata->read_cnt); + if (!n) { raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + return 0; + } - if (!eol || (c != __DISABLED_CHAR)) { - if (tty_put_user(tty, c, *b)) - return -EFAULT; - *b += 1; - *nr -= 1; - } - if (eol) { - tty_audit_push(tty); - return 0; - } - raw_spin_lock_irqsave(&ldata->read_lock, flags); + tail = ldata->read_tail; + size = min_t(size_t, tail + n, N_TTY_BUF_SIZE); + + n_tty_trace("%s: nr:%zu tail:%d n:%zu size:%zu\n", + __func__, *nr, tail, n, size); + + eol = find_next_bit(ldata->read_flags, size, tail); + more = n - (size - tail); + if (eol == N_TTY_BUF_SIZE && more) { + /* scan wrapped without finding set bit */ + eol = find_next_bit(ldata->read_flags, more, 0); + if (eol != more) + found = 1; + } else if (eol != size) + found = 1; + + size = N_TTY_BUF_SIZE - tail; + n = (found + eol + size) & (N_TTY_BUF_SIZE - 1); + c = n; + + if (found && ldata->read_buf[eol] == __DISABLED_CHAR) + n--; + + n_tty_trace("%s: eol:%lu found:%d n:%zu c:%zu size:%zu more:%zu\n", + __func__, eol, found, n, c, size, more); + + raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + + if (n > size) { + ret = copy_to_user(*b, &ldata->read_buf[tail], size); + if (ret) + return -EFAULT; + ret = copy_to_user(*b + size, ldata->read_buf, n - size); + } else + ret = copy_to_user(*b, &ldata->read_buf[tail], n); + + if (ret) + return -EFAULT; + *b += n; + *nr -= n; + + raw_spin_lock_irqsave(&ldata->read_lock, flags); + ldata->read_tail = (ldata->read_tail + c) & (N_TTY_BUF_SIZE - 1); + ldata->read_cnt -= c; + if (found) { + __clear_bit(eol, ldata->read_flags); + /* this test should be redundant: + * we shouldn't be reading data if + * canon_data is 0 + */ + if (--ldata->canon_data < 0) + ldata->canon_data = 0; } raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + if (found) + tty_audit_push(tty); return 0; } @@ -1972,7 +2016,7 @@ do_it_again: } if (ldata->icanon && !L_EXTPROC(tty)) { - retval = canon_copy_to_user(tty, &b, &nr); + retval = canon_copy_from_read_buf(tty, &b, &nr); if (retval) break; } else { -- cgit v0.10.2 From a19d0c6a9166fe3d8bb1575b64f28590206148d9 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:18 -0400 Subject: n_tty: Split n_tty_chars_in_buffer() for reader-only interface N_TTY .chars_in_buffer() method requires serialized access if the current thread is not the single-consumer, n_tty_read(). Separate the internal interface; prepare for lockless read-side. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 74dcedd..594a3c1 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -277,7 +277,7 @@ static void n_tty_flush_buffer(struct tty_struct *tty) * Locking: read_lock */ -static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) +static ssize_t chars_in_buffer(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; unsigned long flags; @@ -295,6 +295,11 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) return n; } +static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) +{ + return chars_in_buffer(tty); +} + /** * is_utf8_continuation - utf8 multibyte check * @c: byte to check @@ -2032,7 +2037,7 @@ do_it_again: } /* If there is enough space in the read buffer now, let the - * low-level driver know. We use n_tty_chars_in_buffer() to + * low-level driver know. We use chars_in_buffer() to * check the buffer, as it now knows about canonical mode. * Otherwise, if the driver is throttled and the line is * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode, @@ -2040,7 +2045,7 @@ do_it_again: */ while (1) { tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); - if (n_tty_chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) + if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) break; if (!tty->count) break; -- cgit v0.10.2 From 475340846f4c9c307f2de03cb4fcc486e267e974 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:19 -0400 Subject: tty: Deprecate ldisc .chars_in_buffer() method Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 594a3c1..290769c 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -297,6 +297,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty) static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) { + WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__); return chars_in_buffer(tty); } -- cgit v0.10.2 From ce74117a1823431c86f5cb620fa852d21310feac Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:20 -0400 Subject: n_tty: Get read_cnt through accessor Prepare for replacing read_cnt field with computed value. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 290769c..371612b 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -115,6 +115,11 @@ struct n_tty_data { raw_spinlock_t read_lock; }; +static inline size_t read_cnt(struct n_tty_data *ldata) +{ + return ldata->read_cnt; +} + static inline int tty_put_user(struct tty_struct *tty, unsigned char x, unsigned char __user *ptr) { @@ -133,9 +138,9 @@ static int receive_room(struct tty_struct *tty) /* Multiply read_cnt by 3, since each byte might take up to * three times as many spaces when PARMRK is set (depending on * its flags, e.g. parity error). */ - left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1; + left = N_TTY_BUF_SIZE - read_cnt(ldata) * 3 - 1; } else - left = N_TTY_BUF_SIZE - ldata->read_cnt - 1; + left = N_TTY_BUF_SIZE - read_cnt(ldata) - 1; /* * If we are doing input canonicalization, and there are no @@ -180,7 +185,7 @@ static void n_tty_set_room(struct tty_struct *tty) static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata) { - if (ldata->read_cnt < N_TTY_BUF_SIZE) { + if (read_cnt(ldata) < N_TTY_BUF_SIZE) { ldata->read_buf[ldata->read_head] = c; ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1); ldata->read_cnt++; @@ -285,7 +290,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty) raw_spin_lock_irqsave(&ldata->read_lock, flags); if (!ldata->icanon) { - n = ldata->read_cnt; + n = read_cnt(ldata); } else if (ldata->canon_data) { n = (ldata->canon_head > ldata->read_tail) ? ldata->canon_head - ldata->read_tail : @@ -1204,7 +1209,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (!test_bit(c, ldata->process_char_map) || ldata->lnext) { ldata->lnext = 0; parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { /* beep if no space */ if (L_ECHO(tty)) process_output('\a', tty); @@ -1304,7 +1309,7 @@ send_signal: return; } if (c == '\n') { - if (ldata->read_cnt >= N_TTY_BUF_SIZE) { + if (read_cnt(ldata) >= N_TTY_BUF_SIZE) { if (L_ECHO(tty)) process_output('\a', tty); return; @@ -1316,7 +1321,7 @@ send_signal: goto handle_newline; } if (c == EOF_CHAR(tty)) { - if (ldata->read_cnt >= N_TTY_BUF_SIZE) + if (read_cnt(ldata) >= N_TTY_BUF_SIZE) return; if (ldata->canon_head != ldata->read_head) set_bit(TTY_PUSH, &tty->flags); @@ -1327,7 +1332,7 @@ send_signal: (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) { + if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk)) { if (L_ECHO(tty)) process_output('\a', tty); return; @@ -1364,7 +1369,7 @@ handle_newline: } parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { /* beep if no space */ if (L_ECHO(tty)) process_output('\a', tty); @@ -1430,7 +1435,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, if (ldata->real_raw) { raw_spin_lock_irqsave(&ldata->read_lock, cpuflags); - i = min(N_TTY_BUF_SIZE - ldata->read_cnt, + i = min(N_TTY_BUF_SIZE - read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_head); i = min(count, i); memcpy(ldata->read_buf + ldata->read_head, cp, i); @@ -1439,7 +1444,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, cp += i; count -= i; - i = min(N_TTY_BUF_SIZE - ldata->read_cnt, + i = min(N_TTY_BUF_SIZE - read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_head); i = min(count, i); memcpy(ldata->read_buf + ldata->read_head, cp, i); @@ -1474,7 +1479,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, tty->ops->flush_chars(tty); } - if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) || + if ((!ldata->icanon && (read_cnt(ldata) >= ldata->minimum_to_wake)) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) @@ -1552,7 +1557,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) ldata->erasing = 0; } - if (canon_change && !L_ICANON(tty) && ldata->read_cnt) + if (canon_change && !L_ICANON(tty) && read_cnt(ldata)) wake_up_interruptible(&tty->read_wait); ldata->icanon = (L_ICANON(tty) != 0); @@ -1701,7 +1706,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt) if (ldata->icanon && !L_EXTPROC(tty)) { if (ldata->canon_data) return 1; - } else if (ldata->read_cnt >= (amt ? amt : 1)) + } else if (read_cnt(ldata) >= (amt ? amt : 1)) return 1; return 0; @@ -1737,7 +1742,7 @@ static int copy_from_read_buf(struct tty_struct *tty, retval = 0; raw_spin_lock_irqsave(&ldata->read_lock, flags); - n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail); + n = min(read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_tail); n = min(*nr, n); raw_spin_unlock_irqrestore(&ldata->read_lock, flags); if (n) { @@ -1751,7 +1756,7 @@ static int copy_from_read_buf(struct tty_struct *tty, ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1); ldata->read_cnt -= n; /* Turn single EOF into zero-length read */ - if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt) + if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata)) n = 0; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); *b += n; @@ -1787,7 +1792,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, raw_spin_lock_irqsave(&ldata->read_lock, flags); - n = min_t(size_t, *nr, ldata->read_cnt); + n = min(*nr, read_cnt(ldata)); if (!n) { raw_spin_unlock_irqrestore(&ldata->read_lock, flags); return 0; @@ -2253,7 +2258,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, return put_user(tty_chars_in_buffer(tty), (int __user *) arg); case TIOCINQ: /* FIXME: Locking */ - retval = ldata->read_cnt; + retval = read_cnt(ldata); if (L_ICANON(tty)) retval = inq_canon(ldata); return put_user(retval, (unsigned int __user *) arg); -- cgit v0.10.2 From bc5a5e3f45d047844830233fb95b19a95c864a0f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:21 -0400 Subject: n_tty: Don't wrap input buffer indices at buffer size Wrap read_buf indices (read_head, read_tail, canon_head) at max representable value, instead of at the N_TTY_BUF_SIZE. This step is necessary to allow lockless reads of these shared variables (by updating the variables atomically). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 371612b..b2fef10 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -96,8 +96,8 @@ struct n_tty_data { DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE); char *read_buf; - int read_head; - int read_tail; + size_t read_head; + size_t read_tail; int read_cnt; int minimum_to_wake; @@ -106,7 +106,7 @@ struct n_tty_data { unsigned int echo_cnt; int canon_data; - unsigned long canon_head; + size_t canon_head; unsigned int canon_column; struct mutex atomic_read_lock; @@ -120,6 +120,16 @@ static inline size_t read_cnt(struct n_tty_data *ldata) return ldata->read_cnt; } +static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i) +{ + return ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + +static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i) +{ + return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + static inline int tty_put_user(struct tty_struct *tty, unsigned char x, unsigned char __user *ptr) { @@ -186,8 +196,8 @@ static void n_tty_set_room(struct tty_struct *tty) static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata) { if (read_cnt(ldata) < N_TTY_BUF_SIZE) { - ldata->read_buf[ldata->read_head] = c; - ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1); + *read_buf_addr(ldata, ldata->read_head) = c; + ldata->read_head++; ldata->read_cnt++; } } @@ -289,13 +299,10 @@ static ssize_t chars_in_buffer(struct tty_struct *tty) ssize_t n = 0; raw_spin_lock_irqsave(&ldata->read_lock, flags); - if (!ldata->icanon) { + if (!ldata->icanon) n = read_cnt(ldata); - } else if (ldata->canon_data) { - n = (ldata->canon_head > ldata->read_tail) ? - ldata->canon_head - ldata->read_tail : - ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail); - } + else + n = ldata->canon_head - ldata->read_tail; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); return n; } @@ -918,7 +925,9 @@ static void eraser(unsigned char c, struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; enum { ERASE, WERASE, KILL } kill_type; - int head, seen_alnums, cnt; + size_t head; + size_t cnt; + int seen_alnums; unsigned long flags; /* FIXME: locking needed ? */ @@ -962,8 +971,8 @@ static void eraser(unsigned char c, struct tty_struct *tty) /* erase a single possibly multibyte character */ do { - head = (head - 1) & (N_TTY_BUF_SIZE-1); - c = ldata->read_buf[head]; + head--; + c = read_buf(ldata, head); } while (is_continuation(c, tty) && head != ldata->canon_head); /* do not partially erase */ @@ -977,7 +986,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) else if (seen_alnums) break; } - cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1); + cnt = ldata->read_head - head; raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_head = head; ldata->read_cnt -= cnt; @@ -991,9 +1000,8 @@ static void eraser(unsigned char c, struct tty_struct *tty) /* if cnt > 1, output a multi-byte character */ echo_char(c, tty); while (--cnt > 0) { - head = (head+1) & (N_TTY_BUF_SIZE-1); - echo_char_raw(ldata->read_buf[head], - ldata); + head++; + echo_char_raw(read_buf(ldata, head), ldata); echo_move_back_col(ldata); } } else if (kill_type == ERASE && !L_ECHOE(tty)) { @@ -1001,7 +1009,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) } else if (c == '\t') { unsigned int num_chars = 0; int after_tab = 0; - unsigned long tail = ldata->read_head; + size_t tail = ldata->read_head; /* * Count the columns used for characters @@ -1011,8 +1019,8 @@ static void eraser(unsigned char c, struct tty_struct *tty) * number of columns. */ while (tail != ldata->canon_head) { - tail = (tail-1) & (N_TTY_BUF_SIZE-1); - c = ldata->read_buf[tail]; + tail--; + c = read_buf(ldata, tail); if (c == '\t') { after_tab = 1; break; @@ -1296,14 +1304,14 @@ send_signal: } if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) { - unsigned long tail = ldata->canon_head; + size_t tail = ldata->canon_head; finish_erasing(ldata); echo_char(c, tty); echo_char_raw('\n', ldata); while (tail != ldata->read_head) { - echo_char(ldata->read_buf[tail], tty); - tail = (tail+1) & (N_TTY_BUF_SIZE-1); + echo_char(read_buf(ldata, tail), tty); + tail++; } process_echoes(tty); return; @@ -1356,7 +1364,7 @@ send_signal: handle_newline: raw_spin_lock_irqsave(&ldata->read_lock, flags); - set_bit(ldata->read_head, ldata->read_flags); + set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags); put_tty_queue_nolock(c, ldata); ldata->canon_head = ldata->read_head; ldata->canon_data++; @@ -1436,19 +1444,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, if (ldata->real_raw) { raw_spin_lock_irqsave(&ldata->read_lock, cpuflags); i = min(N_TTY_BUF_SIZE - read_cnt(ldata), - N_TTY_BUF_SIZE - ldata->read_head); + N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1))); i = min(count, i); - memcpy(ldata->read_buf + ldata->read_head, cp, i); - ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1); + memcpy(read_buf_addr(ldata, ldata->read_head), cp, i); + ldata->read_head += i; ldata->read_cnt += i; cp += i; count -= i; i = min(N_TTY_BUF_SIZE - read_cnt(ldata), - N_TTY_BUF_SIZE - ldata->read_head); + N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1))); i = min(count, i); - memcpy(ldata->read_buf + ldata->read_head, cp, i); - ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1); + memcpy(read_buf_addr(ldata, ldata->read_head), cp, i); + ldata->read_head += i; ldata->read_cnt += i; raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags); } else { @@ -1739,21 +1747,21 @@ static int copy_from_read_buf(struct tty_struct *tty, size_t n; unsigned long flags; bool is_eof; + size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); retval = 0; raw_spin_lock_irqsave(&ldata->read_lock, flags); - n = min(read_cnt(ldata), N_TTY_BUF_SIZE - ldata->read_tail); + n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail); n = min(*nr, n); raw_spin_unlock_irqrestore(&ldata->read_lock, flags); if (n) { - retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n); + retval = copy_to_user(*b, read_buf_addr(ldata, tail), n); n -= retval; - is_eof = n == 1 && - ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty); - tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n, + is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty); + tty_audit_add_data(tty, read_buf_addr(ldata, tail), n, ldata->icanon); raw_spin_lock_irqsave(&ldata->read_lock, flags); - ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1); + ldata->read_tail += n; ldata->read_cnt -= n; /* Turn single EOF into zero-length read */ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata)) @@ -1785,8 +1793,9 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, struct n_tty_data *ldata = tty->disc_data; unsigned long flags; size_t n, size, more, c; - unsigned long eol; - int ret, tail, found = 0; + size_t eol; + size_t tail; + int ret, found = 0; /* N.B. avoid overrun if nr == 0 */ @@ -1798,10 +1807,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, return 0; } - tail = ldata->read_tail; + tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); size = min_t(size_t, tail + n, N_TTY_BUF_SIZE); - n_tty_trace("%s: nr:%zu tail:%d n:%zu size:%zu\n", + n_tty_trace("%s: nr:%zu tail:%zu n:%zu size:%zu\n", __func__, *nr, tail, n, size); eol = find_next_bit(ldata->read_flags, size, tail); @@ -1818,21 +1827,21 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, n = (found + eol + size) & (N_TTY_BUF_SIZE - 1); c = n; - if (found && ldata->read_buf[eol] == __DISABLED_CHAR) + if (found && read_buf(ldata, eol) == __DISABLED_CHAR) n--; - n_tty_trace("%s: eol:%lu found:%d n:%zu c:%zu size:%zu more:%zu\n", + n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n", __func__, eol, found, n, c, size, more); raw_spin_unlock_irqrestore(&ldata->read_lock, flags); if (n > size) { - ret = copy_to_user(*b, &ldata->read_buf[tail], size); + ret = copy_to_user(*b, read_buf_addr(ldata, tail), size); if (ret) return -EFAULT; ret = copy_to_user(*b + size, ldata->read_buf, n - size); } else - ret = copy_to_user(*b, &ldata->read_buf[tail], n); + ret = copy_to_user(*b, read_buf_addr(ldata, tail), n); if (ret) return -EFAULT; @@ -1840,7 +1849,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, *nr -= n; raw_spin_lock_irqsave(&ldata->read_lock, flags); - ldata->read_tail = (ldata->read_tail + c) & (N_TTY_BUF_SIZE - 1); + ldata->read_tail += c; ldata->read_cnt -= c; if (found) { __clear_bit(eol, ldata->read_flags); @@ -2230,19 +2239,19 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, static unsigned long inq_canon(struct n_tty_data *ldata) { - int nr, head, tail; + size_t nr, head, tail; if (!ldata->canon_data) return 0; head = ldata->canon_head; tail = ldata->read_tail; - nr = (head - tail) & (N_TTY_BUF_SIZE-1); + nr = head - tail; /* Skip EOF-chars.. */ while (head != tail) { - if (test_bit(tail, ldata->read_flags) && - ldata->read_buf[tail] == __DISABLED_CHAR) + if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) && + read_buf(ldata, tail) == __DISABLED_CHAR) nr--; - tail = (tail+1) & (N_TTY_BUF_SIZE-1); + tail++; } return nr; } -- cgit v0.10.2 From a2f73be8ee36e48f11f89ab705beb3c587a2f320 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:22 -0400 Subject: n_tty: Remove read_cnt Storing the read_cnt creates an unnecessary shared variable between the single-producer (n_tty_receive_buf()) and the single-consumer (n_tty_read()). Compute read_cnt from head & tail instead of storing. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index b2fef10..d159059 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -98,7 +98,6 @@ struct n_tty_data { char *read_buf; size_t read_head; size_t read_tail; - int read_cnt; int minimum_to_wake; unsigned char *echo_buf; @@ -117,7 +116,7 @@ struct n_tty_data { static inline size_t read_cnt(struct n_tty_data *ldata) { - return ldata->read_cnt; + return ldata->read_head - ldata->read_tail; } static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i) @@ -198,7 +197,6 @@ static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata) if (read_cnt(ldata) < N_TTY_BUF_SIZE) { *read_buf_addr(ldata, ldata->read_head) = c; ldata->read_head++; - ldata->read_cnt++; } } @@ -239,7 +237,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata) unsigned long flags; raw_spin_lock_irqsave(&ldata->read_lock, flags); - ldata->read_head = ldata->read_tail = ldata->read_cnt = 0; + ldata->read_head = ldata->read_tail = 0; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); mutex_lock(&ldata->echo_lock); @@ -942,16 +940,12 @@ static void eraser(unsigned char c, struct tty_struct *tty) else { if (!L_ECHO(tty)) { raw_spin_lock_irqsave(&ldata->read_lock, flags); - ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) & - (N_TTY_BUF_SIZE - 1)); ldata->read_head = ldata->canon_head; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); return; } if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) { raw_spin_lock_irqsave(&ldata->read_lock, flags); - ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) & - (N_TTY_BUF_SIZE - 1)); ldata->read_head = ldata->canon_head; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); finish_erasing(ldata); @@ -989,7 +983,6 @@ static void eraser(unsigned char c, struct tty_struct *tty) cnt = ldata->read_head - head; raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_head = head; - ldata->read_cnt -= cnt; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); if (L_ECHO(tty)) { if (L_ECHOPRT(tty)) { @@ -1448,7 +1441,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, i = min(count, i); memcpy(read_buf_addr(ldata, ldata->read_head), cp, i); ldata->read_head += i; - ldata->read_cnt += i; cp += i; count -= i; @@ -1457,7 +1449,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, i = min(count, i); memcpy(read_buf_addr(ldata, ldata->read_head), cp, i); ldata->read_head += i; - ldata->read_cnt += i; raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags); } else { for (i = count, p = cp, f = fp; i; i--, p++) { @@ -1762,7 +1753,6 @@ static int copy_from_read_buf(struct tty_struct *tty, ldata->icanon); raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_tail += n; - ldata->read_cnt -= n; /* Turn single EOF into zero-length read */ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata)) n = 0; @@ -1850,7 +1840,6 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_tail += c; - ldata->read_cnt -= c; if (found) { __clear_bit(eol, ldata->read_flags); /* this test should be redundant: -- cgit v0.10.2 From 6a1c0680cf3ba94356ecd58833e1540c93472a57 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:23 -0400 Subject: tty: Convert termios_mutex to termios_rwsem termios is commonly accessed unsafely (especially by N_TTY) because the existing mutex forces exclusive access. Convert existing usage. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index a412671..177441a 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -123,14 +123,14 @@ static int irtty_change_speed(struct sir_dev *dev, unsigned speed) tty = priv->tty; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); old_termios = tty->termios; cflag = tty->termios.c_cflag; tty_encode_baud_rate(tty, speed, speed); if (tty->ops->set_termios) tty->ops->set_termios(tty, &old_termios); priv->io.speed = speed; - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return 0; } @@ -280,7 +280,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop) struct ktermios old_termios; int cflag; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); old_termios = tty->termios; cflag = tty->termios.c_cflag; @@ -292,7 +292,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop) tty->termios.c_cflag = cflag; if (tty->ops->set_termios) tty->ops->set_termios(tty, &old_termios); - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); } /*****************************************************************/ diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d159059..ab923bb 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1539,7 +1539,7 @@ int is_ignored(int sig) * guaranteed that this function will not be re-entered or in progress * when the ldisc is closed. * - * Locking: Caller holds tty->termios_mutex + * Locking: Caller holds tty->termios_rwsem */ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index abfd990..1b39dd6 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -287,7 +287,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws) struct tty_struct *pty = tty->link; /* For a PTY we need to lock the tty side */ - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; @@ -314,7 +314,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws) tty->winsize = *ws; pty->winsize = *ws; /* Never used so will go away soon */ done: - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return 0; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 0fa5db4..639e24a 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -604,7 +604,7 @@ static int tty_signal_session_leader(struct tty_struct *tty, int exit_session) * redirect lock for undoing redirection * file list lock for manipulating list of ttys * tty_ldiscs_lock from called functions - * termios_mutex resetting termios data + * termios_rwsem resetting termios data * tasklist_lock to walk task list for hangup event * ->siglock to protect ->signal/->sighand */ @@ -2230,7 +2230,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p) * * Copies the kernel idea of the window size into the user buffer. * - * Locking: tty->termios_mutex is taken to ensure the winsize data + * Locking: tty->termios_rwsem is taken to ensure the winsize data * is consistent. */ @@ -2238,9 +2238,9 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) { int err; - mutex_lock(&tty->termios_mutex); + down_read(&tty->termios_rwsem); err = copy_to_user(arg, &tty->winsize, sizeof(*arg)); - mutex_unlock(&tty->termios_mutex); + up_read(&tty->termios_rwsem); return err ? -EFAULT: 0; } @@ -2261,7 +2261,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws) unsigned long flags; /* Lock the tty */ - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; /* Get the PID values and reference them so we can @@ -2276,7 +2276,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws) tty->winsize = *ws; done: - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return 0; } EXPORT_SYMBOL(tty_do_resize); @@ -3015,7 +3015,7 @@ void initialize_tty_struct(struct tty_struct *tty, tty->session = NULL; tty->pgrp = NULL; mutex_init(&tty->legacy_mutex); - mutex_init(&tty->termios_mutex); + init_rwsem(&tty->termios_rwsem); init_ldsem(&tty->ldisc_sem); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 3500d41..9ce20df 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -94,20 +94,20 @@ EXPORT_SYMBOL(tty_driver_flush_buffer); * @tty: terminal * * Indicate that a tty should stop transmitting data down the stack. - * Takes the termios mutex to protect against parallel throttle/unthrottle + * Takes the termios rwsem to protect against parallel throttle/unthrottle * and also to ensure the driver can consistently reference its own * termios data at this point when implementing software flow control. */ void tty_throttle(struct tty_struct *tty) { - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); /* check TTY_THROTTLED first so it indicates our state */ if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) && tty->ops->throttle) tty->ops->throttle(tty); tty->flow_change = 0; - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); } EXPORT_SYMBOL(tty_throttle); @@ -116,7 +116,7 @@ EXPORT_SYMBOL(tty_throttle); * @tty: terminal * * Indicate that a tty may continue transmitting data down the stack. - * Takes the termios mutex to protect against parallel throttle/unthrottle + * Takes the termios rwsem to protect against parallel throttle/unthrottle * and also to ensure the driver can consistently reference its own * termios data at this point when implementing software flow control. * @@ -126,12 +126,12 @@ EXPORT_SYMBOL(tty_throttle); void tty_unthrottle(struct tty_struct *tty) { - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) && tty->ops->unthrottle) tty->ops->unthrottle(tty); tty->flow_change = 0; - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); } EXPORT_SYMBOL(tty_unthrottle); @@ -151,7 +151,7 @@ int tty_throttle_safe(struct tty_struct *tty) { int ret = 0; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); if (!test_bit(TTY_THROTTLED, &tty->flags)) { if (tty->flow_change != TTY_THROTTLE_SAFE) ret = 1; @@ -161,7 +161,7 @@ int tty_throttle_safe(struct tty_struct *tty) tty->ops->throttle(tty); } } - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return ret; } @@ -182,7 +182,7 @@ int tty_unthrottle_safe(struct tty_struct *tty) { int ret = 0; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); if (test_bit(TTY_THROTTLED, &tty->flags)) { if (tty->flow_change != TTY_UNTHROTTLE_SAFE) ret = 1; @@ -192,7 +192,7 @@ int tty_unthrottle_safe(struct tty_struct *tty) tty->ops->unthrottle(tty); } } - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return ret; } @@ -468,7 +468,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate); * @obad: output baud rate * * Update the current termios data for the tty with the new speed - * settings. The caller must hold the termios_mutex for the tty in + * settings. The caller must hold the termios_rwsem for the tty in * question. */ @@ -528,7 +528,7 @@ EXPORT_SYMBOL(tty_termios_hw_change); * is a bit of layering violation here with n_tty in terms of the * internal knowledge of this function. * - * Locking: termios_mutex + * Locking: termios_rwsem */ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) @@ -544,7 +544,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) /* FIXME: we need to decide on some locking/ordering semantics for the set_termios notification eventually */ - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); old_termios = tty->termios; tty->termios = *new_termios; unset_locked_termios(&tty->termios, &old_termios, &tty->termios_locked); @@ -586,7 +586,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) (ld->ops->set_termios)(tty, &old_termios); tty_ldisc_deref(ld); } - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return 0; } EXPORT_SYMBOL_GPL(tty_set_termios); @@ -601,7 +601,7 @@ EXPORT_SYMBOL_GPL(tty_set_termios); * functions before using tty_set_termios to do the actual changes. * * Locking: - * Called functions take ldisc and termios_mutex locks + * Called functions take ldisc and termios_rwsem locks */ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) @@ -613,9 +613,9 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) if (retval) return retval; - mutex_lock(&tty->termios_mutex); + down_read(&tty->termios_rwsem); tmp_termios = tty->termios; - mutex_unlock(&tty->termios_mutex); + up_read(&tty->termios_rwsem); if (opt & TERMIOS_TERMIO) { if (user_termio_to_kernel_termios(&tmp_termios, @@ -667,16 +667,16 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) static void copy_termios(struct tty_struct *tty, struct ktermios *kterm) { - mutex_lock(&tty->termios_mutex); + down_read(&tty->termios_rwsem); *kterm = tty->termios; - mutex_unlock(&tty->termios_mutex); + up_read(&tty->termios_rwsem); } static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm) { - mutex_lock(&tty->termios_mutex); + down_read(&tty->termios_rwsem); *kterm = tty->termios_locked; - mutex_unlock(&tty->termios_mutex); + up_read(&tty->termios_rwsem); } static int get_termio(struct tty_struct *tty, struct termio __user *termio) @@ -723,10 +723,10 @@ static int set_termiox(struct tty_struct *tty, void __user *arg, int opt) return -ERESTARTSYS; } - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); if (tty->ops->set_termiox) tty->ops->set_termiox(tty, &tnew); - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return 0; } @@ -761,13 +761,13 @@ static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) { struct sgttyb tmp; - mutex_lock(&tty->termios_mutex); + down_read(&tty->termios_rwsem); tmp.sg_ispeed = tty->termios.c_ispeed; tmp.sg_ospeed = tty->termios.c_ospeed; tmp.sg_erase = tty->termios.c_cc[VERASE]; tmp.sg_kill = tty->termios.c_cc[VKILL]; tmp.sg_flags = get_sgflags(tty); - mutex_unlock(&tty->termios_mutex); + up_read(&tty->termios_rwsem); return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0; } @@ -806,7 +806,7 @@ static void set_sgflags(struct ktermios *termios, int flags) * Updates a terminal from the legacy BSD style terminal information * structure. * - * Locking: termios_mutex + * Locking: termios_rwsem */ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) @@ -822,7 +822,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) if (copy_from_user(&tmp, sgttyb, sizeof(tmp))) return -EFAULT; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); termios = tty->termios; termios.c_cc[VERASE] = tmp.sg_erase; termios.c_cc[VKILL] = tmp.sg_kill; @@ -832,7 +832,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) tty_termios_encode_baud_rate(&termios, termios.c_ispeed, termios.c_ospeed); #endif - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); tty_set_termios(tty, &termios); return 0; } @@ -843,14 +843,14 @@ static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars) { struct tchars tmp; - mutex_lock(&tty->termios_mutex); + down_read(&tty->termios_rwsem); tmp.t_intrc = tty->termios.c_cc[VINTR]; tmp.t_quitc = tty->termios.c_cc[VQUIT]; tmp.t_startc = tty->termios.c_cc[VSTART]; tmp.t_stopc = tty->termios.c_cc[VSTOP]; tmp.t_eofc = tty->termios.c_cc[VEOF]; tmp.t_brkc = tty->termios.c_cc[VEOL2]; /* what is brkc anyway? */ - mutex_unlock(&tty->termios_mutex); + up_read(&tty->termios_rwsem); return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; } @@ -860,14 +860,14 @@ static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars) if (copy_from_user(&tmp, tchars, sizeof(tmp))) return -EFAULT; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); tty->termios.c_cc[VINTR] = tmp.t_intrc; tty->termios.c_cc[VQUIT] = tmp.t_quitc; tty->termios.c_cc[VSTART] = tmp.t_startc; tty->termios.c_cc[VSTOP] = tmp.t_stopc; tty->termios.c_cc[VEOF] = tmp.t_eofc; tty->termios.c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */ - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return 0; } #endif @@ -877,7 +877,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) { struct ltchars tmp; - mutex_lock(&tty->termios_mutex); + down_read(&tty->termios_rwsem); tmp.t_suspc = tty->termios.c_cc[VSUSP]; /* what is dsuspc anyway? */ tmp.t_dsuspc = tty->termios.c_cc[VSUSP]; @@ -886,7 +886,7 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) tmp.t_flushc = tty->termios.c_cc[VEOL2]; tmp.t_werasc = tty->termios.c_cc[VWERASE]; tmp.t_lnextc = tty->termios.c_cc[VLNEXT]; - mutex_unlock(&tty->termios_mutex); + up_read(&tty->termios_rwsem); return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; } @@ -897,7 +897,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) if (copy_from_user(&tmp, ltchars, sizeof(tmp))) return -EFAULT; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); tty->termios.c_cc[VSUSP] = tmp.t_suspc; /* what is dsuspc anyway? */ tty->termios.c_cc[VEOL2] = tmp.t_dsuspc; @@ -906,7 +906,7 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) tty->termios.c_cc[VEOL2] = tmp.t_flushc; tty->termios.c_cc[VWERASE] = tmp.t_werasc; tty->termios.c_cc[VLNEXT] = tmp.t_lnextc; - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return 0; } #endif @@ -946,7 +946,7 @@ static int send_prio_char(struct tty_struct *tty, char ch) * @arg: enable/disable CLOCAL * * Perform a change to the CLOCAL state and call into the driver - * layer to make it visible. All done with the termios mutex + * layer to make it visible. All done with the termios rwsem */ static int tty_change_softcar(struct tty_struct *tty, int arg) @@ -955,7 +955,7 @@ static int tty_change_softcar(struct tty_struct *tty, int arg) int bit = arg ? CLOCAL : 0; struct ktermios old; - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); old = tty->termios; tty->termios.c_cflag &= ~CLOCAL; tty->termios.c_cflag |= bit; @@ -963,7 +963,7 @@ static int tty_change_softcar(struct tty_struct *tty, int arg) tty->ops->set_termios(tty, &old); if ((tty->termios.c_cflag & CLOCAL) != bit) ret = -EINVAL; - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); return ret; } @@ -1066,9 +1066,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, if (user_termios_to_kernel_termios(&kterm, (struct termios __user *) arg)) return -EFAULT; - mutex_lock(&real_tty->termios_mutex); + down_write(&real_tty->termios_rwsem); real_tty->termios_locked = kterm; - mutex_unlock(&real_tty->termios_mutex); + up_write(&real_tty->termios_rwsem); return 0; #else case TIOCGLCKTRMIOS: @@ -1083,9 +1083,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, if (user_termios_to_kernel_termios_1(&kterm, (struct termios __user *) arg)) return -EFAULT; - mutex_lock(&real_tty->termios_mutex); + down_write(&real_tty->termios_rwsem); real_tty->termios_locked = kterm; - mutex_unlock(&real_tty->termios_mutex); + up_write(&real_tty->termios_rwsem); return ret; #endif #ifdef TCGETX @@ -1093,9 +1093,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, struct termiox ktermx; if (real_tty->termiox == NULL) return -EINVAL; - mutex_lock(&real_tty->termios_mutex); + down_read(&real_tty->termios_rwsem); memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox)); - mutex_unlock(&real_tty->termios_mutex); + up_read(&real_tty->termios_rwsem); if (copy_to_user(p, &ktermx, sizeof(struct termiox))) ret = -EFAULT; return ret; diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index e52d615..6458e11 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -415,14 +415,14 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush); * they are not on hot paths so a little discipline won't do * any harm. * - * Locking: takes termios_mutex + * Locking: takes termios_rwsem */ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) { - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); tty->termios.c_line = num; - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); } /** @@ -602,11 +602,11 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) static void tty_reset_termios(struct tty_struct *tty) { - mutex_lock(&tty->termios_mutex); + down_write(&tty->termios_rwsem); tty->termios = tty->driver->init_termios; tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios); tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios); - mutex_unlock(&tty->termios_mutex); + up_write(&tty->termios_rwsem); } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index c677829..02af6cc 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -828,7 +828,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * If the caller passes a tty structure then update the termios winsize * information and perform any necessary signal handling. * - * Caller must hold the console semaphore. Takes the termios mutex and + * Caller must hold the console semaphore. Takes the termios rwsem and * ctrl_lock of the tty IFF a tty is passed. */ @@ -972,7 +972,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) * the actual work. * * Takes the console sem and the called methods then take the tty - * termios_mutex and the tty ctrl_lock in that order. + * termios_rwsem and the tty ctrl_lock in that order. */ static int vt_resize(struct tty_struct *tty, struct winsize *ws) { diff --git a/include/linux/tty.h b/include/linux/tty.h index 8323ee4..d304207 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -10,6 +10,7 @@ #include #include #include +#include @@ -243,9 +244,9 @@ struct tty_struct { struct mutex atomic_write_lock; struct mutex legacy_mutex; - struct mutex termios_mutex; + struct rw_semaphore termios_rwsem; spinlock_t ctrl_lock; - /* Termios values are protected by the termios mutex */ + /* Termios values are protected by the termios rwsem */ struct ktermios termios, termios_locked; struct termiox *termiox; /* May be NULL for unsupported */ char name[64]; @@ -253,7 +254,7 @@ struct tty_struct { struct pid *session; unsigned long flags; int count; - struct winsize winsize; /* termios mutex */ + struct winsize winsize; /* termios rwsem */ unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1; unsigned char ctrl_status; /* ctrl_lock */ unsigned int receive_room; /* Bytes free for queue */ -- cgit v0.10.2 From 9356b535fcb71db494fc434acceb79f56d15bda2 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:24 -0400 Subject: n_tty: Access termios values safely Use termios_rwsem to guarantee safe access to the termios values. This is particularly important for N_TTY as changing certain termios settings alters the mode of operation. termios_rwsem must be dropped across throttle/unthrottle since those functions claim the termios_rwsem exclusively (to guarantee safe access to the termios and for mutual exclusion). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index ab923bb..0599b58 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1491,10 +1491,14 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, * canonical mode and don't have a newline yet! */ while (1) { + int throttled; tty_set_flow_change(tty, TTY_THROTTLE_SAFE); if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE) break; - if (!tty_throttle_safe(tty)) + up_read(&tty->termios_rwsem); + throttled = tty_throttle_safe(tty); + down_read(&tty->termios_rwsem); + if (!throttled) break; } __tty_set_flow_change(tty, 0); @@ -1503,7 +1507,9 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { + down_read(&tty->termios_rwsem); __receive_buf(tty, cp, fp, count); + up_read(&tty->termios_rwsem); } static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, @@ -1512,6 +1518,8 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, struct n_tty_data *ldata = tty->disc_data; int room; + down_read(&tty->termios_rwsem); + tty->receive_room = room = receive_room(tty); if (!room) ldata->no_room = 1; @@ -1519,6 +1527,8 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, if (count) __receive_buf(tty, cp, fp, count); + up_read(&tty->termios_rwsem); + return count; } @@ -1934,6 +1944,8 @@ do_it_again: if (c < 0) return c; + down_read(&tty->termios_rwsem); + minimum = time = 0; timeout = MAX_SCHEDULE_TIMEOUT; if (!ldata->icanon) { @@ -1955,11 +1967,15 @@ do_it_again: * Internal serialization of reads. */ if (file->f_flags & O_NONBLOCK) { - if (!mutex_trylock(&ldata->atomic_read_lock)) + if (!mutex_trylock(&ldata->atomic_read_lock)) { + up_read(&tty->termios_rwsem); return -EAGAIN; + } } else { - if (mutex_lock_interruptible(&ldata->atomic_read_lock)) + if (mutex_lock_interruptible(&ldata->atomic_read_lock)) { + up_read(&tty->termios_rwsem); return -ERESTARTSYS; + } } packet = tty->packet; @@ -2009,7 +2025,11 @@ do_it_again: break; } n_tty_set_room(tty); + up_read(&tty->termios_rwsem); + timeout = schedule_timeout(timeout); + + down_read(&tty->termios_rwsem); continue; } __set_current_state(TASK_RUNNING); @@ -2048,13 +2068,17 @@ do_it_again: * we won't get any more characters. */ while (1) { + int unthrottled; tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) break; if (!tty->count) break; n_tty_set_room(tty); - if (!tty_unthrottle_safe(tty)) + up_read(&tty->termios_rwsem); + unthrottled = tty_unthrottle_safe(tty); + down_read(&tty->termios_rwsem); + if (!unthrottled) break; } __tty_set_flow_change(tty, 0); @@ -2076,10 +2100,13 @@ do_it_again: retval = size; if (nr) clear_bit(TTY_PUSH, &tty->flags); - } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) + } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) { + up_read(&tty->termios_rwsem); goto do_it_again; + } n_tty_set_room(tty); + up_read(&tty->termios_rwsem); return retval; } @@ -2120,6 +2147,8 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, return retval; } + down_read(&tty->termios_rwsem); + /* Write out any echoed characters that are still pending */ process_echoes(tty); @@ -2173,13 +2202,18 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, retval = -EAGAIN; break; } + up_read(&tty->termios_rwsem); + schedule(); + + down_read(&tty->termios_rwsem); } break_out: __set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); if (b - buf != nr && tty->fasync) set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + up_read(&tty->termios_rwsem); return (b - buf) ? b - buf : retval; } -- cgit v0.10.2 From a73d3d6987e4e60d442b7cdf4f7c38400b454bf5 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:25 -0400 Subject: n_tty: Replace canon_data with index comparison canon_data represented the # of lines which had been copied to the receive buffer but not yet copied to the user buffer. The value was tested to determine if input was available in canonical mode (and also to force input overrun if the receive buffer was full but a newline had not been received). However, the actual count was irrelevent; only whether it was non-zero (meaning 'is there any input to transfer?'). This shared count is unnecessary and unsafe with a lockless algorithm. The same check is made by comparing canon_head with read_tail instead. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0599b58..1098dd7 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -104,7 +104,6 @@ struct n_tty_data { unsigned int echo_pos; unsigned int echo_cnt; - int canon_data; size_t canon_head; unsigned int canon_column; @@ -158,7 +157,7 @@ static int receive_room(struct tty_struct *tty) * characters will be beeped. */ if (left <= 0) - left = ldata->icanon && !ldata->canon_data; + left = ldata->icanon && ldata->canon_head == ldata->read_tail; return left; } @@ -237,14 +236,14 @@ static void reset_buffer_flags(struct n_tty_data *ldata) unsigned long flags; raw_spin_lock_irqsave(&ldata->read_lock, flags); - ldata->read_head = ldata->read_tail = 0; + ldata->read_head = ldata->canon_head = ldata->read_tail = 0; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); mutex_lock(&ldata->echo_lock); ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0; mutex_unlock(&ldata->echo_lock); - ldata->canon_head = ldata->canon_data = ldata->erasing = 0; + ldata->erasing = 0; bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); } @@ -1360,7 +1359,6 @@ handle_newline: set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags); put_tty_queue_nolock(c, ldata); ldata->canon_head = ldata->read_head; - ldata->canon_data++; raw_spin_unlock_irqrestore(&ldata->read_lock, flags); kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) @@ -1562,7 +1560,6 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) if (canon_change) { bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); ldata->canon_head = ldata->read_tail; - ldata->canon_data = 0; ldata->erasing = 0; } @@ -1713,7 +1710,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt) tty_flush_to_ldisc(tty); if (ldata->icanon && !L_EXTPROC(tty)) { - if (ldata->canon_data) + if (ldata->canon_head != ldata->read_tail) return 1; } else if (read_cnt(ldata) >= (amt ? amt : 1)) return 1; @@ -1850,15 +1847,8 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_tail += c; - if (found) { + if (found) __clear_bit(eol, ldata->read_flags); - /* this test should be redundant: - * we shouldn't be reading data if - * canon_data is 0 - */ - if (--ldata->canon_data < 0) - ldata->canon_data = 0; - } raw_spin_unlock_irqrestore(&ldata->read_lock, flags); if (found) @@ -2264,7 +2254,7 @@ static unsigned long inq_canon(struct n_tty_data *ldata) { size_t nr, head, tail; - if (!ldata->canon_data) + if (ldata->canon_head == ldata->read_tail) return 0; head = ldata->canon_head; tail = ldata->read_tail; -- cgit v0.10.2 From 6d76bd2618535c581f1673047b8341fd291abc67 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:26 -0400 Subject: n_tty: Make N_TTY ldisc receive path lockless n_tty has a single-producer/single-consumer input model; use lockless publish instead. Use termios_rwsem to exclude both consumer and producer while changing or resetting buffer indices, eg., when flushing. Also, claim exclusive termios_rwsem to safely retrieve the buffer indices from a thread other than consumer or producer (eg., TIOCINQ ioctl). Note the read_tail is published _after_ clearing the newline indicator in read_flags to avoid racing the producer. Drop read_lock spinlock. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 1098dd7..c7f71cb 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -110,7 +110,6 @@ struct n_tty_data { struct mutex atomic_read_lock; struct mutex output_lock; struct mutex echo_lock; - raw_spinlock_t read_lock; }; static inline size_t read_cnt(struct n_tty_data *ldata) @@ -168,7 +167,10 @@ static int receive_room(struct tty_struct *tty) * * Re-schedules the flip buffer work if space just became available. * - * Locks: Concurrent update is protected with read_lock + * Caller holds exclusive termios_rwsem + * or + * n_tty_read()/consumer path: + * holds non-exclusive termios_rwsem */ static void n_tty_set_room(struct tty_struct *tty) @@ -191,34 +193,27 @@ static void n_tty_set_room(struct tty_struct *tty) } } -static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata) -{ - if (read_cnt(ldata) < N_TTY_BUF_SIZE) { - *read_buf_addr(ldata, ldata->read_head) = c; - ldata->read_head++; - } -} - /** * put_tty_queue - add character to tty * @c: character * @ldata: n_tty data * - * Add a character to the tty read_buf queue. This is done under the - * read_lock to serialize character addition and also to protect us - * against parallel reads or flushes + * Add a character to the tty read_buf queue. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + * modifies read_head + * + * read_head is only considered 'published' if canonical mode is + * not active. */ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata) { - unsigned long flags; - /* - * The problem of stomping on the buffers ends here. - * Why didn't anyone see this one coming? --AJK - */ - raw_spin_lock_irqsave(&ldata->read_lock, flags); - put_tty_queue_nolock(c, ldata); - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + if (read_cnt(ldata) < N_TTY_BUF_SIZE) { + *read_buf_addr(ldata, ldata->read_head) = c; + ldata->read_head++; + } } /** @@ -228,16 +223,13 @@ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata) * Reset the read buffer counters and clear the flags. * Called from n_tty_open() and n_tty_flush_buffer(). * - * Locking: tty_read_lock for read fields. + * Locking: caller holds exclusive termios_rwsem + * (or locking is not required) */ static void reset_buffer_flags(struct n_tty_data *ldata) { - unsigned long flags; - - raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_head = ldata->canon_head = ldata->read_tail = 0; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); mutex_lock(&ldata->echo_lock); ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0; @@ -267,47 +259,55 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty) * buffer flushed (eg at hangup) or when the N_TTY line discipline * internally has to clean the pending queue (for example some signals). * - * Locking: ctrl_lock, read_lock. + * Holds termios_rwsem to exclude producer/consumer while + * buffer indices are reset. + * + * Locking: ctrl_lock, exclusive termios_rwsem */ static void n_tty_flush_buffer(struct tty_struct *tty) { + down_write(&tty->termios_rwsem); reset_buffer_flags(tty->disc_data); n_tty_set_room(tty); if (tty->link) n_tty_packet_mode_flush(tty); + up_write(&tty->termios_rwsem); } -/** - * n_tty_chars_in_buffer - report available bytes - * @tty: tty device - * - * Report the number of characters buffered to be delivered to user - * at this instant in time. - * - * Locking: read_lock - */ - static ssize_t chars_in_buffer(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - unsigned long flags; ssize_t n = 0; - raw_spin_lock_irqsave(&ldata->read_lock, flags); if (!ldata->icanon) n = read_cnt(ldata); else n = ldata->canon_head - ldata->read_tail; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); return n; } +/** + * n_tty_chars_in_buffer - report available bytes + * @tty: tty device + * + * Report the number of characters buffered to be delivered to user + * at this instant in time. + * + * Locking: exclusive termios_rwsem + */ + static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) { + ssize_t n; + WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__); - return chars_in_buffer(tty); + + down_write(&tty->termios_rwsem); + n = chars_in_buffer(tty); + up_write(&tty->termios_rwsem); + return n; } /** @@ -915,7 +915,12 @@ static inline void finish_erasing(struct n_tty_data *ldata) * present in the stream from the driver layer. Handles the complexities * of UTF-8 multibyte symbols. * - * Locking: read_lock for tty buffers + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + * modifies read_head + * + * Modifying the read_head is not considered a publish in this context + * because canonical mode is active -- only canon_head publishes */ static void eraser(unsigned char c, struct tty_struct *tty) @@ -925,9 +930,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) size_t head; size_t cnt; int seen_alnums; - unsigned long flags; - /* FIXME: locking needed ? */ if (ldata->read_head == ldata->canon_head) { /* process_output('\a', tty); */ /* what do you think? */ return; @@ -938,15 +941,11 @@ static void eraser(unsigned char c, struct tty_struct *tty) kill_type = WERASE; else { if (!L_ECHO(tty)) { - raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_head = ldata->canon_head; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); return; } if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) { - raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_head = ldata->canon_head; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); finish_erasing(ldata); echo_char(KILL_CHAR(tty), tty); /* Add a newline if ECHOK is on and ECHOKE is off. */ @@ -958,7 +957,6 @@ static void eraser(unsigned char c, struct tty_struct *tty) } seen_alnums = 0; - /* FIXME: Locking ?? */ while (ldata->read_head != ldata->canon_head) { head = ldata->read_head; @@ -980,9 +978,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) break; } cnt = ldata->read_head - head; - raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_head = head; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); if (L_ECHO(tty)) { if (L_ECHOPRT(tty)) { if (!ldata->erasing) { @@ -1071,7 +1067,11 @@ static inline void isig(int sig, struct tty_struct *tty) * An RS232 break event has been hit in the incoming bitstream. This * can cause a variety of events depending upon the termios settings. * - * Called from the receive_buf path so single threaded. + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + * publishes read_head via put_tty_queue() + * + * Note: may get exclusive termios_rwsem if flushing input buffer */ static inline void n_tty_receive_break(struct tty_struct *tty) @@ -1083,8 +1083,11 @@ static inline void n_tty_receive_break(struct tty_struct *tty) if (I_BRKINT(tty)) { isig(SIGINT, tty); if (!L_NOFLSH(tty)) { + /* flushing needs exclusive termios_rwsem */ + up_read(&tty->termios_rwsem); n_tty_flush_buffer(tty); tty_driver_flush_buffer(tty); + down_read(&tty->termios_rwsem); } return; } @@ -1131,7 +1134,11 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty) * @c: character * * Process a parity error and queue the right data to indicate - * the error case if necessary. Locking as per n_tty_receive_buf. + * the error case if necessary. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + * publishes read_head via put_tty_queue() */ static inline void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) @@ -1159,12 +1166,16 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty, * Process an individual character of input received from the driver. * This is serialized with respect to itself by the rules for the * driver above. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + * publishes canon_head if canonical mode is active + * otherwise, publishes read_head via put_tty_queue() */ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; - unsigned long flags; int parmrk; if (ldata->raw) { @@ -1253,8 +1264,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (c == SUSP_CHAR(tty)) { send_signal: if (!L_NOFLSH(tty)) { + /* flushing needs exclusive termios_rwsem */ + up_read(&tty->termios_rwsem); n_tty_flush_buffer(tty); tty_driver_flush_buffer(tty); + down_read(&tty->termios_rwsem); } if (I_IXON(tty)) start_tty(tty); @@ -1355,11 +1369,9 @@ send_signal: put_tty_queue(c, ldata); handle_newline: - raw_spin_lock_irqsave(&ldata->read_lock, flags); set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags); - put_tty_queue_nolock(c, ldata); + put_tty_queue(c, ldata); ldata->canon_head = ldata->read_head; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) wake_up_interruptible(&tty->read_wait); @@ -1420,6 +1432,10 @@ static void n_tty_write_wakeup(struct tty_struct *tty) * been received. This function must be called from soft contexts * not from interrupt context. The driver is responsible for making * calls one at a time and in order (or using flush_to_ldisc) + * + * n_tty_receive_buf()/producer path: + * claims non-exclusive termios_rwsem + * publishes read_head and canon_head */ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, @@ -1430,10 +1446,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *f, flags = TTY_NORMAL; int i; char buf[64]; - unsigned long cpuflags; if (ldata->real_raw) { - raw_spin_lock_irqsave(&ldata->read_lock, cpuflags); i = min(N_TTY_BUF_SIZE - read_cnt(ldata), N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1))); i = min(count, i); @@ -1447,7 +1461,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, i = min(count, i); memcpy(read_buf_addr(ldata, ldata->read_head), cp, i); ldata->read_head += i; - raw_spin_unlock_irqrestore(&ldata->read_lock, cpuflags); } else { for (i = count, p = cp, f = fp; i; i--, p++) { if (f) @@ -1677,7 +1690,6 @@ static int n_tty_open(struct tty_struct *tty) mutex_init(&ldata->atomic_read_lock); mutex_init(&ldata->output_lock); mutex_init(&ldata->echo_lock); - raw_spin_lock_init(&ldata->read_lock); /* These are ugly. Currently a malloc failure here can panic */ ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); @@ -1733,6 +1745,9 @@ static inline int input_available_p(struct tty_struct *tty, int amt) * * Called under the ldata->atomic_read_lock sem * + * n_tty_read()/consumer path: + * caller holds non-exclusive termios_rwsem + * read_tail published */ static int copy_from_read_buf(struct tty_struct *tty, @@ -1743,27 +1758,22 @@ static int copy_from_read_buf(struct tty_struct *tty, struct n_tty_data *ldata = tty->disc_data; int retval; size_t n; - unsigned long flags; bool is_eof; size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); retval = 0; - raw_spin_lock_irqsave(&ldata->read_lock, flags); n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail); n = min(*nr, n); - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); if (n) { retval = copy_to_user(*b, read_buf_addr(ldata, tail), n); n -= retval; is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty); tty_audit_add_data(tty, read_buf_addr(ldata, tail), n, ldata->icanon); - raw_spin_lock_irqsave(&ldata->read_lock, flags); ldata->read_tail += n; /* Turn single EOF into zero-length read */ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata)) n = 0; - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); *b += n; *nr -= n; } @@ -1781,6 +1791,10 @@ static int copy_from_read_buf(struct tty_struct *tty, * character into the user-space buffer. * * Called under the atomic_read_lock mutex + * + * n_tty_read()/consumer path: + * caller holds non-exclusive termios_rwsem + * read_tail published */ static int canon_copy_from_read_buf(struct tty_struct *tty, @@ -1788,21 +1802,15 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, size_t *nr) { struct n_tty_data *ldata = tty->disc_data; - unsigned long flags; size_t n, size, more, c; size_t eol; size_t tail; int ret, found = 0; /* N.B. avoid overrun if nr == 0 */ - - raw_spin_lock_irqsave(&ldata->read_lock, flags); - n = min(*nr, read_cnt(ldata)); - if (!n) { - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + if (!n) return 0; - } tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); size = min_t(size_t, tail + n, N_TTY_BUF_SIZE); @@ -1830,8 +1838,6 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n", __func__, eol, found, n, c, size, more); - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); - if (n > size) { ret = copy_to_user(*b, read_buf_addr(ldata, tail), size); if (ret) @@ -1845,11 +1851,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, *b += n; *nr -= n; - raw_spin_lock_irqsave(&ldata->read_lock, flags); - ldata->read_tail += c; if (found) - __clear_bit(eol, ldata->read_flags); - raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + clear_bit(eol, ldata->read_flags); + smp_mb__after_clear_bit(); + ldata->read_tail += c; if (found) tty_audit_push(tty); @@ -1913,6 +1918,10 @@ static int job_control(struct tty_struct *tty, struct file *file) * a hangup. Always called in user context, may sleep. * * This code must be sure never to sleep through a hangup. + * + * n_tty_read()/consumer path: + * claims non-exclusive termios_rwsem + * publishes read_tail */ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, @@ -2279,10 +2288,12 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, case TIOCOUTQ: return put_user(tty_chars_in_buffer(tty), (int __user *) arg); case TIOCINQ: - /* FIXME: Locking */ - retval = read_cnt(ldata); + down_write(&tty->termios_rwsem); if (L_ICANON(tty)) retval = inq_canon(ldata); + else + retval = read_cnt(ldata); + up_write(&tty->termios_rwsem); return put_user(retval, (unsigned int __user *) arg); default: return n_tty_ioctl_helper(tty, file, cmd, arg); -- cgit v0.10.2 From 6f9b028a8fb9ba4cef0bd04ad4ce149c3f1e838f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:27 -0400 Subject: n_tty: Reset lnext if canonical mode changes lnext escapes the next input character as a literal, and must be reset when canonical mode changes (to avoid misinterpreting a special character as a literal if canonical mode is changed back again). lnext is specifically not reset on a buffer flush so as to avoid misinterpreting the next input character as a special character. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index c7f71cb..e63beab 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1574,6 +1574,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); ldata->canon_head = ldata->read_tail; ldata->erasing = 0; + ldata->lnext = 0; } if (canon_change && !L_ICANON(tty) && read_cnt(ldata)) -- cgit v0.10.2 From d1913e3916f35eb043e8d770839dd96c1379007d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:28 -0400 Subject: n_tty: Fix type mismatches in receive_buf raw copy Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index e63beab..fe1c399 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1444,24 +1444,27 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, struct n_tty_data *ldata = tty->disc_data; const unsigned char *p; char *f, flags = TTY_NORMAL; - int i; char buf[64]; if (ldata->real_raw) { - i = min(N_TTY_BUF_SIZE - read_cnt(ldata), - N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1))); - i = min(count, i); - memcpy(read_buf_addr(ldata, ldata->read_head), cp, i); - ldata->read_head += i; - cp += i; - count -= i; - - i = min(N_TTY_BUF_SIZE - read_cnt(ldata), - N_TTY_BUF_SIZE - (ldata->read_head & (N_TTY_BUF_SIZE - 1))); - i = min(count, i); - memcpy(read_buf_addr(ldata, ldata->read_head), cp, i); - ldata->read_head += i; + size_t n, head; + + head = ldata->read_head & (N_TTY_BUF_SIZE - 1); + n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); + n = min_t(size_t, count, n); + memcpy(read_buf_addr(ldata, head), cp, n); + ldata->read_head += n; + cp += n; + count -= n; + + head = ldata->read_head & (N_TTY_BUF_SIZE - 1); + n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); + n = min_t(size_t, count, n); + memcpy(read_buf_addr(ldata, head), cp, n); + ldata->read_head += n; } else { + int i; + for (i = count, p = cp, f = fp; i; i--, p++) { if (f) flags = *f++; -- cgit v0.10.2 From f95499c3030fe1bfad57745f2db1959c5b43dca8 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:29 -0400 Subject: n_tty: Don't wait for buffer work in read() loop User-space read() can run concurrently with receiving from device; waiting for receive_buf() to complete is not required. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index fe1c399..a6eea30 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1724,7 +1724,6 @@ static inline int input_available_p(struct tty_struct *tty, int amt) { struct n_tty_data *ldata = tty->disc_data; - tty_flush_to_ldisc(tty); if (ldata->icanon && !L_EXTPROC(tty)) { if (ldata->canon_head != ldata->read_tail) return 1; -- cgit v0.10.2 From fb7aa03db605e4f0b9a62cd4c77177c2596edd95 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:30 -0400 Subject: n_tty: Separate buffer indices to prevent cache-line sharing If the read buffer indices are in the same cache-line, cpus will contended over the cache-line (so called 'false sharing'). Separate the producer-published fields from the consumer-published fields; document the locks relevant to each field. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index a6eea30..d0c8805 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -82,29 +82,38 @@ #endif struct n_tty_data { - unsigned int column; + /* producer-published */ + size_t read_head; + size_t canon_head; + DECLARE_BITMAP(process_char_map, 256); + + /* private to n_tty_receive_overrun (single-threaded) */ unsigned long overrun_time; int num_overrun; /* non-atomic */ bool no_room; + /* must hold exclusive termios_rwsem to reset these */ unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; unsigned char echo_overrun:1; - DECLARE_BITMAP(process_char_map, 256); + /* shared by producer and consumer */ + char *read_buf; DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE); - char *read_buf; - size_t read_head; - size_t read_tail; int minimum_to_wake; + /* consumer-published */ + size_t read_tail; + + /* protected by echo_lock */ unsigned char *echo_buf; unsigned int echo_pos; unsigned int echo_cnt; - size_t canon_head; + /* protected by output lock */ + unsigned int column; unsigned int canon_column; struct mutex atomic_read_lock; -- cgit v0.10.2 From d8c1f929aa8164cd8eaa830068d2fa3159c0764a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:31 -0400 Subject: tty: Only guarantee termios read safety for throttle/unthrottle No tty driver modifies termios during throttle() or unthrottle(). Therefore, only read safety is required. However, tty_throttle_safe and tty_unthrottle_safe must still be mutually exclusive; introduce throttle_mutex for that purpose. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d0c8805..b78ee46 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1518,9 +1518,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, tty_set_flow_change(tty, TTY_THROTTLE_SAFE); if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE) break; - up_read(&tty->termios_rwsem); throttled = tty_throttle_safe(tty); - down_read(&tty->termios_rwsem); if (!throttled) break; } @@ -2086,9 +2084,7 @@ do_it_again: if (!tty->count) break; n_tty_set_room(tty); - up_read(&tty->termios_rwsem); unthrottled = tty_unthrottle_safe(tty); - down_read(&tty->termios_rwsem); if (!unthrottled) break; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 639e24a..1b32da6 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3015,6 +3015,7 @@ void initialize_tty_struct(struct tty_struct *tty, tty->session = NULL; tty->pgrp = NULL; mutex_init(&tty->legacy_mutex); + mutex_init(&tty->throttle_mutex); init_rwsem(&tty->termios_rwsem); init_ldsem(&tty->ldisc_sem); init_waitqueue_head(&tty->write_wait); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 9ce20df..03ba081 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -151,7 +151,7 @@ int tty_throttle_safe(struct tty_struct *tty) { int ret = 0; - down_write(&tty->termios_rwsem); + mutex_lock(&tty->throttle_mutex); if (!test_bit(TTY_THROTTLED, &tty->flags)) { if (tty->flow_change != TTY_THROTTLE_SAFE) ret = 1; @@ -161,7 +161,7 @@ int tty_throttle_safe(struct tty_struct *tty) tty->ops->throttle(tty); } } - up_write(&tty->termios_rwsem); + mutex_unlock(&tty->throttle_mutex); return ret; } @@ -182,7 +182,7 @@ int tty_unthrottle_safe(struct tty_struct *tty) { int ret = 0; - down_write(&tty->termios_rwsem); + mutex_lock(&tty->throttle_mutex); if (test_bit(TTY_THROTTLED, &tty->flags)) { if (tty->flow_change != TTY_UNTHROTTLE_SAFE) ret = 1; @@ -192,7 +192,7 @@ int tty_unthrottle_safe(struct tty_struct *tty) tty->ops->unthrottle(tty); } } - up_write(&tty->termios_rwsem); + mutex_unlock(&tty->throttle_mutex); return ret; } diff --git a/include/linux/tty.h b/include/linux/tty.h index d304207..57a70d1 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -244,6 +244,7 @@ struct tty_struct { struct mutex atomic_write_lock; struct mutex legacy_mutex; + struct mutex throttle_mutex; struct rw_semaphore termios_rwsem; spinlock_t ctrl_lock; /* Termios values are protected by the termios rwsem */ -- cgit v0.10.2 From 9a4aec2dd5b54606b3508e0e064750f516009650 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:32 -0400 Subject: n_tty: Move chars_in_buffer() to factor throttle/unthrottle Prepare to factor throttle and unthrottle into helper functions; relocate chars_in_buffer() to avoid forward declaration. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index b78ee46..9ec0c68 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -202,6 +202,18 @@ static void n_tty_set_room(struct tty_struct *tty) } } +static ssize_t chars_in_buffer(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + ssize_t n = 0; + + if (!ldata->icanon) + n = read_cnt(ldata); + else + n = ldata->canon_head - ldata->read_tail; + return n; +} + /** * put_tty_queue - add character to tty * @c: character @@ -285,18 +297,6 @@ static void n_tty_flush_buffer(struct tty_struct *tty) up_write(&tty->termios_rwsem); } -static ssize_t chars_in_buffer(struct tty_struct *tty) -{ - struct n_tty_data *ldata = tty->disc_data; - ssize_t n = 0; - - if (!ldata->icanon) - n = read_cnt(ldata); - else - n = ldata->canon_head - ldata->read_tail; - return n; -} - /** * n_tty_chars_in_buffer - report available bytes * @tty: tty device -- cgit v0.10.2 From 6367ca72f1fad60de7ef607e10a999ed86ca6a8b Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:33 -0400 Subject: n_tty: Factor throttle/unthrottle into helper functions Prepare for special handling of pty throttle/unthrottle; factor flow control into helper functions. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 9ec0c68..9e13c80 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -214,6 +214,50 @@ static ssize_t chars_in_buffer(struct tty_struct *tty) return n; } +static inline void n_tty_check_throttle(struct tty_struct *tty) +{ + /* + * Check the remaining room for the input canonicalization + * mode. We don't want to throttle the driver if we're in + * canonical mode and don't have a newline yet! + */ + while (1) { + int throttled; + tty_set_flow_change(tty, TTY_THROTTLE_SAFE); + if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE) + break; + throttled = tty_throttle_safe(tty); + if (!throttled) + break; + } + __tty_set_flow_change(tty, 0); +} + +static inline void n_tty_check_unthrottle(struct tty_struct *tty) +{ + /* If there is enough space in the read buffer now, let the + * low-level driver know. We use chars_in_buffer() to + * check the buffer, as it now knows about canonical mode. + * Otherwise, if the driver is throttled and the line is + * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode, + * we won't get any more characters. + */ + + while (1) { + int unthrottled; + tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); + if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) + break; + if (!tty->count) + break; + n_tty_set_room(tty); + unthrottled = tty_unthrottle_safe(tty); + if (!unthrottled) + break; + } + __tty_set_flow_change(tty, 0); +} + /** * put_tty_queue - add character to tty * @c: character @@ -1508,21 +1552,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, wake_up_interruptible(&tty->read_wait); } - /* - * Check the remaining room for the input canonicalization - * mode. We don't want to throttle the driver if we're in - * canonical mode and don't have a newline yet! - */ - while (1) { - int throttled; - tty_set_flow_change(tty, TTY_THROTTLE_SAFE); - if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE) - break; - throttled = tty_throttle_safe(tty); - if (!throttled) - break; - } - __tty_set_flow_change(tty, 0); + n_tty_check_throttle(tty); } static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, @@ -2069,26 +2099,7 @@ do_it_again: } } - /* If there is enough space in the read buffer now, let the - * low-level driver know. We use chars_in_buffer() to - * check the buffer, as it now knows about canonical mode. - * Otherwise, if the driver is throttled and the line is - * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode, - * we won't get any more characters. - */ - while (1) { - int unthrottled; - tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); - if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) - break; - if (!tty->count) - break; - n_tty_set_room(tty); - unthrottled = tty_unthrottle_safe(tty); - if (!unthrottled) - break; - } - __tty_set_flow_change(tty, 0); + n_tty_check_unthrottle(tty); if (b - buf >= minimum) break; -- cgit v0.10.2 From ee0bab83ce65b6f6910cfc0c8278351a0583531b Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:34 -0400 Subject: n_tty: Move n_tty_write_wakeup() to avoid forward declaration Prepare to special case pty flow control; avoid forward declaration. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 9e13c80..0e3efc1 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -214,6 +214,21 @@ static ssize_t chars_in_buffer(struct tty_struct *tty) return n; } +/** + * n_tty_write_wakeup - asynchronous I/O notifier + * @tty: tty device + * + * Required for the ptys, serial driver etc. since processes + * that attach themselves to the master and rely on ASYNC + * IO must be woken up + */ + +static void n_tty_write_wakeup(struct tty_struct *tty) +{ + if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) + kill_fasync(&tty->fasync, SIGIO, POLL_OUT); +} + static inline void n_tty_check_throttle(struct tty_struct *tty) { /* @@ -1458,22 +1473,6 @@ handle_newline: put_tty_queue(c, ldata); } - -/** - * n_tty_write_wakeup - asynchronous I/O notifier - * @tty: tty device - * - * Required for the ptys, serial driver etc. since processes - * that attach themselves to the master and rely on ASYNC - * IO must be woken up - */ - -static void n_tty_write_wakeup(struct tty_struct *tty) -{ - if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) - kill_fasync(&tty->fasync, SIGIO, POLL_OUT); -} - /** * n_tty_receive_buf - data receive * @tty: terminal device -- cgit v0.10.2 From 3afb1b394a49d1237c9c0af8e8b724ddfe5b94ba Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 23 Jul 2013 08:47:30 -0400 Subject: n_tty: Special case pty flow control The pty driver forces ldisc flow control on, regardless of available receive buffer space, so the writer can be woken whenever unthrottle is called. However, this 'forced throttle' has performance consequences, as multiple atomic operations are necessary to unthrottle and perform the write wakeup for every input line (in canonical mode). Instead, short-circuit the unthrottle if the tty is a pty and perform the write wakeup directly. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0e3efc1..59eb444 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -231,6 +231,8 @@ static void n_tty_write_wakeup(struct tty_struct *tty) static inline void n_tty_check_throttle(struct tty_struct *tty) { + if (tty->driver->type == TTY_DRIVER_TYPE_PTY) + return; /* * Check the remaining room for the input canonicalization * mode. We don't want to throttle the driver if we're in @@ -250,6 +252,18 @@ static inline void n_tty_check_throttle(struct tty_struct *tty) static inline void n_tty_check_unthrottle(struct tty_struct *tty) { + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->link->ldisc->ops->write_wakeup == n_tty_write_wakeup) { + if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) + return; + if (!tty->count) + return; + n_tty_set_room(tty); + n_tty_write_wakeup(tty->link); + wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT); + return; + } + /* If there is enough space in the read buffer now, let the * low-level driver know. We use chars_in_buffer() to * check the buffer, as it now knows about canonical mode. -- cgit v0.10.2 From f0f947c124e05ec977019b974b12dfe171dd7148 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:14:36 -0400 Subject: n_tty: Queue buffer work on any available cpu Scheduling buffer work on the same cpu as the read() thread limits the parallelism now possible between the receive_buf path and the n_tty_read() path. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 59eb444..a69470e 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -198,7 +198,7 @@ static void n_tty_set_room(struct tty_struct *tty) */ WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags), "scheduling buffer work for halted ldisc\n"); - schedule_work(&tty->port->buf.work); + queue_work(system_unbound_wq, &tty->port->buf.work); } } -- cgit v0.10.2 From 1fc359fc3ea72314cc3ebdfa94c60e020c152cd2 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:01 -0400 Subject: tty: Compute flip buffer ptrs The char_buf_ptr and flag_buf_ptr values are trivially derived from the .data field offset; compute values as needed. Fixes a long-standing type-mismatch with the char and flag ptrs. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index ff1b2e3..170674c 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -71,8 +71,6 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) p->next = NULL; p->commit = 0; p->read = 0; - p->char_buf_ptr = (char *)(p->data); - p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size; port->buf.memory_used += size; return p; } @@ -265,8 +263,8 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port, if (unlikely(space == 0)) { break; } - memcpy(tb->char_buf_ptr + tb->used, chars, space); - memset(tb->flag_buf_ptr + tb->used, flag, space); + memcpy(char_buf_ptr(tb, tb->used), chars, space); + memset(flag_buf_ptr(tb, tb->used), flag, space); tb->used += space; copied += space; chars += space; @@ -303,8 +301,8 @@ int tty_insert_flip_string_flags(struct tty_port *port, if (unlikely(space == 0)) { break; } - memcpy(tb->char_buf_ptr + tb->used, chars, space); - memcpy(tb->flag_buf_ptr + tb->used, flags, space); + memcpy(char_buf_ptr(tb, tb->used), chars, space); + memcpy(flag_buf_ptr(tb, tb->used), flags, space); tb->used += space; copied += space; chars += space; @@ -364,8 +362,8 @@ int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars, int space = tty_buffer_request_room(port, size); if (likely(space)) { struct tty_buffer *tb = port->buf.tail; - *chars = tb->char_buf_ptr + tb->used; - memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space); + *chars = char_buf_ptr(tb, tb->used); + memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space); tb->used += space; } return space; @@ -394,8 +392,8 @@ int tty_prepare_flip_string_flags(struct tty_port *port, int space = tty_buffer_request_room(port, size); if (likely(space)) { struct tty_buffer *tb = port->buf.tail; - *chars = tb->char_buf_ptr + tb->used; - *flags = tb->flag_buf_ptr + tb->used; + *chars = char_buf_ptr(tb, tb->used); + *flags = flag_buf_ptr(tb, tb->used); tb->used += space; } return space; @@ -407,8 +405,8 @@ static int receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count) { struct tty_ldisc *disc = tty->ldisc; - char *p = head->char_buf_ptr + head->read; - unsigned char *f = head->flag_buf_ptr + head->read; + unsigned char *p = char_buf_ptr(head, head->read); + char *f = flag_buf_ptr(head, head->read); if (disc->ops->receive_buf2) count = disc->ops->receive_buf2(tty, p, f, count); diff --git a/include/linux/tty.h b/include/linux/tty.h index 57a70d1..87bbaa3 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -31,8 +31,6 @@ struct tty_buffer { struct tty_buffer *next; - char *char_buf_ptr; - unsigned char *flag_buf_ptr; int used; int size; int commit; @@ -41,6 +39,16 @@ struct tty_buffer { unsigned long data[0]; }; +static inline unsigned char *char_buf_ptr(struct tty_buffer *b, int ofs) +{ + return ((unsigned char *)b->data) + ofs; +} + +static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs) +{ + return (char *)char_buf_ptr(b, ofs) + b->size; +} + /* * We default to dicing tty buffer allocations to this many characters * in order to avoid multiple page allocations. We know the size of diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index e0f2526..ad03039 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -18,8 +18,8 @@ static inline int tty_insert_flip_char(struct tty_port *port, { struct tty_buffer *tb = port->buf.tail; if (tb && tb->used < tb->size) { - tb->flag_buf_ptr[tb->used] = flag; - tb->char_buf_ptr[tb->used++] = ch; + *flag_buf_ptr(tb, tb->used) = flag; + *char_buf_ptr(tb, tb->used++) = ch; return 1; } return tty_insert_flip_string_flags(port, &ch, &flag, 1); -- cgit v0.10.2 From 1cef50e317c3395c6e8451f2b82a155db6ef2b42 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:02 -0400 Subject: tty: Fix flip buffer free list Since flip buffers are size-aligned to 256 bytes and all flip buffers 512-bytes or larger are not added to the free list, the free list only contains 256-byte flip buffers. Remove the list search when allocating a new flip buffer. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 170674c..a5e3962 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -18,6 +18,10 @@ #include #include + +#define MIN_TTYB_SIZE 256 +#define TTYB_ALIGN_MASK 255 + /** * tty_buffer_free_all - free buffers used by a tty * @tty: tty to free from @@ -94,7 +98,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) buf->memory_used -= b->size; WARN_ON(buf->memory_used < 0); - if (b->size >= 512) + if (b->size > MIN_TTYB_SIZE) kfree(b); else { b->next = buf->free; @@ -176,9 +180,10 @@ void tty_buffer_flush(struct tty_struct *tty) static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size) { struct tty_buffer **tbh = &port->buf.free; - while ((*tbh) != NULL) { - struct tty_buffer *t = *tbh; - if (t->size >= size) { + if (size <= MIN_TTYB_SIZE) { + if (*tbh) { + struct tty_buffer *t = *tbh; + *tbh = t->next; t->next = NULL; t->used = 0; @@ -187,10 +192,9 @@ static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size) port->buf.memory_used += t->size; return t; } - tbh = &((*tbh)->next); } /* Round the buffer size out */ - size = (size + 0xFF) & ~0xFF; + size = __ALIGN_MASK(size, TTYB_ALIGN_MASK); return tty_buffer_alloc(port, size); /* Should possibly check if this fails for the largest buffer we have queued and recycle that ? */ -- cgit v0.10.2 From 9dd5139f973f55ab4b2e9aff8171781f1e55b29d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:03 -0400 Subject: tty: Factor flip buffer initialization into helper function Factor shared code; prepare for adding 0-sized sentinel flip buffer. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index a5e3962..56d4602 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -22,6 +22,15 @@ #define MIN_TTYB_SIZE 256 #define TTYB_ALIGN_MASK 255 +static void tty_buffer_reset(struct tty_buffer *p, size_t size) +{ + p->used = 0; + p->size = size; + p->next = NULL; + p->commit = 0; + p->read = 0; +} + /** * tty_buffer_free_all - free buffers used by a tty * @tty: tty to free from @@ -70,11 +79,8 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); if (p == NULL) return NULL; - p->used = 0; - p->size = size; - p->next = NULL; - p->commit = 0; - p->read = 0; + + tty_buffer_reset(p, size); port->buf.memory_used += size; return p; } @@ -185,10 +191,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size) struct tty_buffer *t = *tbh; *tbh = t->next; - t->next = NULL; - t->used = 0; - t->commit = 0; - t->read = 0; + tty_buffer_reset(t, t->size); port->buf.memory_used += t->size; return t; } -- cgit v0.10.2 From 11b9faa44df76189b8346ff602a2c01c610c37eb Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:04 -0400 Subject: tty: Merge tty_buffer_find() into tty_buffer_alloc() tty_buffer_find() implements a simple free list lookaside cache. Merge this functionality into tty_buffer_alloc() to reflect the more traditional alloc/free symmetry. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 56d4602..a428fa2 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -64,6 +64,8 @@ void tty_buffer_free_all(struct tty_port *port) * @size: desired size (characters) * * Allocate a new tty buffer to hold the desired number of characters. + * We round our buffers off in 256 character chunks to get better + * allocation behaviour. * Return NULL if out of memory or the allocation would exceed the * per device queue * @@ -72,14 +74,29 @@ void tty_buffer_free_all(struct tty_port *port) static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) { + struct tty_buffer **tbh = &port->buf.free; struct tty_buffer *p; + /* Round the buffer size out */ + size = __ALIGN_MASK(size, TTYB_ALIGN_MASK); + + if (size <= MIN_TTYB_SIZE) { + if (*tbh) { + p = *tbh; + *tbh = p->next; + goto found; + } + } + + /* Should possibly check if this fails for the largest buffer we + have queued and recycle that ? */ if (port->buf.memory_used + size > 65536) return NULL; p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); if (p == NULL) return NULL; +found: tty_buffer_reset(p, size); port->buf.memory_used += size; return p; @@ -172,37 +189,6 @@ void tty_buffer_flush(struct tty_struct *tty) } /** - * tty_buffer_find - find a free tty buffer - * @tty: tty owning the buffer - * @size: characters wanted - * - * Locate an existing suitable tty buffer or if we are lacking one then - * allocate a new one. We round our buffers off in 256 character chunks - * to get better allocation behaviour. - * - * Locking: Caller must hold tty->buf.lock - */ - -static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size) -{ - struct tty_buffer **tbh = &port->buf.free; - if (size <= MIN_TTYB_SIZE) { - if (*tbh) { - struct tty_buffer *t = *tbh; - - *tbh = t->next; - tty_buffer_reset(t, t->size); - port->buf.memory_used += t->size; - return t; - } - } - /* Round the buffer size out */ - size = __ALIGN_MASK(size, TTYB_ALIGN_MASK); - return tty_buffer_alloc(port, size); - /* Should possibly check if this fails for the largest buffer we - have queued and recycle that ? */ -} -/** * tty_buffer_request_room - grow tty buffer if needed * @tty: tty structure * @size: size desired @@ -230,7 +216,7 @@ int tty_buffer_request_room(struct tty_port *port, size_t size) if (left < size) { /* This is the slow path - looking for new buffers to use */ - if ((n = tty_buffer_find(port, size)) != NULL) { + if ((n = tty_buffer_alloc(port, size)) != NULL) { if (b != NULL) { b->next = n; b->commit = b->used; -- cgit v0.10.2 From 2cf7b67e87f0d8db025cff12b5d29c0663bbcd87 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:05 -0400 Subject: tty: Use generic names for flip buffer list cursors Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index a428fa2..0259a76 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -44,15 +44,15 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size) void tty_buffer_free_all(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - struct tty_buffer *thead; + struct tty_buffer *p; - while ((thead = buf->head) != NULL) { - buf->head = thead->next; - kfree(thead); + while ((p = buf->head) != NULL) { + buf->head = p->next; + kfree(p); } - while ((thead = buf->free) != NULL) { - buf->free = thead->next; - kfree(thead); + while ((p = buf->free) != NULL) { + buf->free = p->next; + kfree(p); } buf->tail = NULL; buf->memory_used = 0; @@ -143,13 +143,13 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) static void __tty_buffer_flush(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - struct tty_buffer *thead; + struct tty_buffer *next; if (unlikely(buf->head == NULL)) return; - while ((thead = buf->head->next) != NULL) { + while ((next = buf->head->next) != NULL) { tty_buffer_free(port, buf->head); - buf->head = thead; + buf->head = next; } WARN_ON(buf->head != buf->tail); buf->head->read = buf->head->commit; -- cgit v0.10.2 From 809850b7a5fcc0a96d023e1171a7944c60fd5a71 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:06 -0400 Subject: tty: Use lockless flip buffer free list In preparation for lockless flip buffers, make the flip buffer free list lockless. NB: using llist is not the optimal solution, as the driver and buffer work may contend over the llist head unnecessarily. However, test measurements indicate this contention is low. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 0259a76..069640e 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -44,16 +44,17 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size) void tty_buffer_free_all(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - struct tty_buffer *p; + struct tty_buffer *p, *next; + struct llist_node *llist; while ((p = buf->head) != NULL) { buf->head = p->next; kfree(p); } - while ((p = buf->free) != NULL) { - buf->free = p->next; + llist = llist_del_all(&buf->free); + llist_for_each_entry_safe(p, next, llist, free) kfree(p); - } + buf->tail = NULL; buf->memory_used = 0; } @@ -68,22 +69,20 @@ void tty_buffer_free_all(struct tty_port *port) * allocation behaviour. * Return NULL if out of memory or the allocation would exceed the * per device queue - * - * Locking: Caller must hold tty->buf.lock */ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) { - struct tty_buffer **tbh = &port->buf.free; + struct llist_node *free; struct tty_buffer *p; /* Round the buffer size out */ size = __ALIGN_MASK(size, TTYB_ALIGN_MASK); if (size <= MIN_TTYB_SIZE) { - if (*tbh) { - p = *tbh; - *tbh = p->next; + free = llist_del_first(&port->buf.free); + if (free) { + p = llist_entry(free, struct tty_buffer, free); goto found; } } @@ -109,8 +108,6 @@ found: * * Free a tty buffer, or add it to the free list according to our * internal strategy - * - * Locking: Caller must hold tty->buf.lock */ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) @@ -123,10 +120,8 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) if (b->size > MIN_TTYB_SIZE) kfree(b); - else { - b->next = buf->free; - buf->free = b; - } + else + llist_add(&b->free, &buf->free); } /** @@ -542,7 +537,7 @@ void tty_buffer_init(struct tty_port *port) spin_lock_init(&buf->lock); buf->head = NULL; buf->tail = NULL; - buf->free = NULL; + init_llist_head(&buf->free); buf->memory_used = 0; INIT_WORK(&buf->work, flush_to_ldisc); } diff --git a/include/linux/llist.h b/include/linux/llist.h index cdaa7f0..8828a78 100644 --- a/include/linux/llist.h +++ b/include/linux/llist.h @@ -125,6 +125,29 @@ static inline void init_llist_head(struct llist_head *list) (pos) = llist_entry((pos)->member.next, typeof(*(pos)), member)) /** + * llist_for_each_entry_safe - iterate over some deleted entries of lock-less list of given type + * safe against removal of list entry + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @node: the first entry of deleted list entries. + * @member: the name of the llist_node with the struct. + * + * In general, some entries of the lock-less list can be traversed + * safely only after being removed from list, so start with an entry + * instead of list head. + * + * If being used on entries deleted from lock-less list directly, the + * traverse order is from the newest to the oldest added entry. If + * you want to traverse from the oldest to the newest, you must + * reverse the order by yourself before traversing. + */ +#define llist_for_each_entry_safe(pos, n, node, member) \ + for (pos = llist_entry((node), typeof(*pos), member); \ + &pos->member != NULL && \ + (n = llist_entry(pos->member.next, typeof(*n), member), true); \ + pos = n) + +/** * llist_empty - tests whether a lock-less list is empty * @head: the list to test * diff --git a/include/linux/tty.h b/include/linux/tty.h index 87bbaa3..5043b12 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -11,6 +11,7 @@ #include #include #include +#include @@ -30,7 +31,10 @@ #define __DISABLED_CHAR '\0' struct tty_buffer { - struct tty_buffer *next; + union { + struct tty_buffer *next; + struct llist_node free; + }; int used; int size; int commit; @@ -65,7 +69,7 @@ struct tty_bufhead { spinlock_t lock; struct tty_buffer *head; /* Queue head */ struct tty_buffer *tail; /* Active buffer */ - struct tty_buffer *free; /* Free queue head */ + struct llist_head free; /* Free queue head */ int memory_used; /* Buffer space used excluding free queue */ }; -- cgit v0.10.2 From 7391ee16950e772076d321792d9fbf030f921345 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:07 -0400 Subject: tty: Simplify flip buffer list with 0-sized sentinel Use a 0-sized sentinel to avoid assigning the head ptr from the driver side thread. This also eliminates testing head/tail for NULL. When the sentinel is first 'consumed' by the buffer work (or by tty_buffer_flush()), it is detached from the list but not freed nor added to the free list. Both buffer work and tty_buffer_flush() continue to preserve at least 1 flip buffer to which head & tail is pointed. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 069640e..231b7a8 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -49,13 +49,16 @@ void tty_buffer_free_all(struct tty_port *port) while ((p = buf->head) != NULL) { buf->head = p->next; - kfree(p); + if (p->size > 0) + kfree(p); } llist = llist_del_all(&buf->free); llist_for_each_entry_safe(p, next, llist, free) kfree(p); - buf->tail = NULL; + tty_buffer_reset(&buf->sentinel, 0); + buf->head = &buf->sentinel; + buf->tail = &buf->sentinel; buf->memory_used = 0; } @@ -120,7 +123,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) if (b->size > MIN_TTYB_SIZE) kfree(b); - else + else if (b->size > 0) llist_add(&b->free, &buf->free); } @@ -140,8 +143,6 @@ static void __tty_buffer_flush(struct tty_port *port) struct tty_bufhead *buf = &port->buf; struct tty_buffer *next; - if (unlikely(buf->head == NULL)) - return; while ((next = buf->head->next) != NULL) { tty_buffer_free(port, buf->head); buf->head = next; @@ -200,23 +201,14 @@ int tty_buffer_request_room(struct tty_port *port, size_t size) int left; unsigned long flags; spin_lock_irqsave(&buf->lock, flags); - /* OPTIMISATION: We could keep a per tty "zero" sized buffer to - remove this conditional if its worth it. This would be invisible - to the callers */ b = buf->tail; - if (b != NULL) - left = b->size - b->used; - else - left = 0; + left = b->size - b->used; if (left < size) { /* This is the slow path - looking for new buffers to use */ if ((n = tty_buffer_alloc(port, size)) != NULL) { - if (b != NULL) { - b->next = n; - b->commit = b->used; - } else - buf->head = n; + b->next = n; + b->commit = b->used; buf->tail = n; } else size = left; @@ -247,10 +239,8 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port, int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); int space = tty_buffer_request_room(port, goal); struct tty_buffer *tb = port->buf.tail; - /* If there is no space then tb may be NULL */ - if (unlikely(space == 0)) { + if (unlikely(space == 0)) break; - } memcpy(char_buf_ptr(tb, tb->used), chars, space); memset(flag_buf_ptr(tb, tb->used), flag, space); tb->used += space; @@ -285,10 +275,8 @@ int tty_insert_flip_string_flags(struct tty_port *port, int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); int space = tty_buffer_request_room(port, goal); struct tty_buffer *tb = port->buf.tail; - /* If there is no space then tb may be NULL */ - if (unlikely(space == 0)) { + if (unlikely(space == 0)) break; - } memcpy(char_buf_ptr(tb, tb->used), chars, space); memcpy(flag_buf_ptr(tb, tb->used), flags, space); tb->used += space; @@ -322,8 +310,7 @@ void tty_schedule_flip(struct tty_port *port) WARN_ON(port->low_latency); spin_lock_irqsave(&buf->lock, flags); - if (buf->tail != NULL) - buf->tail->commit = buf->tail->used; + buf->tail->commit = buf->tail->used; spin_unlock_irqrestore(&buf->lock, flags); schedule_work(&buf->work); } @@ -438,8 +425,8 @@ static void flush_to_ldisc(struct work_struct *work) spin_lock_irqsave(&buf->lock, flags); if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) { - struct tty_buffer *head; - while ((head = buf->head) != NULL) { + while (1) { + struct tty_buffer *head = buf->head; int count; count = head->commit - head->read; @@ -509,8 +496,7 @@ void tty_flip_buffer_push(struct tty_port *port) unsigned long flags; spin_lock_irqsave(&buf->lock, flags); - if (buf->tail != NULL) - buf->tail->commit = buf->tail->used; + buf->tail->commit = buf->tail->used; spin_unlock_irqrestore(&buf->lock, flags); if (port->low_latency) @@ -535,8 +521,9 @@ void tty_buffer_init(struct tty_port *port) struct tty_bufhead *buf = &port->buf; spin_lock_init(&buf->lock); - buf->head = NULL; - buf->tail = NULL; + tty_buffer_reset(&buf->sentinel, 0); + buf->head = &buf->sentinel; + buf->tail = &buf->sentinel; init_llist_head(&buf->free); buf->memory_used = 0; INIT_WORK(&buf->work, flush_to_ldisc); diff --git a/include/linux/tty.h b/include/linux/tty.h index 5043b12..2e93eb8 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -67,6 +67,7 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs) struct tty_bufhead { struct work_struct work; spinlock_t lock; + struct tty_buffer sentinel; struct tty_buffer *head; /* Queue head */ struct tty_buffer *tail; /* Active buffer */ struct llist_head free; /* Free queue head */ -- cgit v0.10.2 From 7bfe0b7116be207cf2204ae06335cc89d8f8ee02 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:08 -0400 Subject: tty: Track flip buffer memory limit atomically Lockless flip buffers require atomically updating the bytes-in-use watermark. The pty driver also peeks at the watermark value to limit memory consumption to a much lower value than the default; query the watermark with new fn, tty_buffer_space_avail(). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 1b39dd6..b38a28b 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -89,17 +89,13 @@ static void pty_unthrottle(struct tty_struct *tty) * pty_space - report space left for writing * @to: tty we are writing into * - * The tty buffers allow 64K but we sneak a peak and clip at 8K this - * allows a lot of overspill room for echo and other fun messes to - * be handled properly + * Limit the buffer space used by ptys to 8k. */ static int pty_space(struct tty_struct *to) { - int n = 8192 - to->port->buf.memory_used; - if (n < 0) - return 0; - return n; + int n = tty_buffer_space_avail(to->port); + return min(n, 8192); } /** diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 231b7a8..5d5a564 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -22,6 +22,31 @@ #define MIN_TTYB_SIZE 256 #define TTYB_ALIGN_MASK 255 +/* + * Byte threshold to limit memory consumption for flip buffers. + * The actual memory limit is > 2x this amount. + */ +#define TTYB_MEM_LIMIT 65536 + + +/** + * tty_buffer_space_avail - return unused buffer space + * @port - tty_port owning the flip buffer + * + * Returns the # of bytes which can be written by the driver without + * reaching the buffer limit. + * + * Note: this does not guarantee that memory is available to write + * the returned # of bytes (use tty_prepare_flip_string_xxx() to + * pre-allocate if memory guarantee is required). + */ + +int tty_buffer_space_avail(struct tty_port *port) +{ + int space = TTYB_MEM_LIMIT - atomic_read(&port->buf.memory_used); + return max(space, 0); +} + static void tty_buffer_reset(struct tty_buffer *p, size_t size) { p->used = 0; @@ -59,7 +84,8 @@ void tty_buffer_free_all(struct tty_port *port) tty_buffer_reset(&buf->sentinel, 0); buf->head = &buf->sentinel; buf->tail = &buf->sentinel; - buf->memory_used = 0; + + atomic_set(&buf->memory_used, 0); } /** @@ -92,7 +118,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) /* Should possibly check if this fails for the largest buffer we have queued and recycle that ? */ - if (port->buf.memory_used + size > 65536) + if (atomic_read(&port->buf.memory_used) > TTYB_MEM_LIMIT) return NULL; p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); if (p == NULL) @@ -100,7 +126,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) found: tty_buffer_reset(p, size); - port->buf.memory_used += size; + atomic_add(size, &port->buf.memory_used); return p; } @@ -118,8 +144,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) struct tty_bufhead *buf = &port->buf; /* Dumb strategy for now - should keep some stats */ - buf->memory_used -= b->size; - WARN_ON(buf->memory_used < 0); + WARN_ON(atomic_sub_return(b->size, &buf->memory_used) < 0); if (b->size > MIN_TTYB_SIZE) kfree(b); @@ -525,7 +550,7 @@ void tty_buffer_init(struct tty_port *port) buf->head = &buf->sentinel; buf->tail = &buf->sentinel; init_llist_head(&buf->free); - buf->memory_used = 0; + atomic_set(&buf->memory_used, 0); INIT_WORK(&buf->work, flush_to_ldisc); } diff --git a/include/linux/tty.h b/include/linux/tty.h index 2e93eb8..7c12454 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -71,8 +71,7 @@ struct tty_bufhead { struct tty_buffer *head; /* Queue head */ struct tty_buffer *tail; /* Active buffer */ struct llist_head free; /* Free queue head */ - int memory_used; /* Buffer space used excluding - free queue */ + atomic_t memory_used; /* In-use buffers excluding free list */ }; /* * When a break, frame error, or parity error happens, these codes are diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index ad03039..6944ed2 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -1,6 +1,7 @@ #ifndef _LINUX_TTY_FLIP_H #define _LINUX_TTY_FLIP_H +extern int tty_buffer_space_avail(struct tty_port *port); extern int tty_buffer_request_room(struct tty_port *port, size_t size); extern int tty_insert_flip_string_flags(struct tty_port *port, const unsigned char *chars, const char *flags, size_t size); -- cgit v0.10.2 From e8437d7ecbc50198705331449367d401ebb3181f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:09 -0400 Subject: tty: Make driver-side flip buffers lockless Driver-side flip buffer input is already single-threaded; 'publish' the .next link as the last operation on the tail buffer so the 'consumer' sees the already-completed flip buffer. The commit buffer index is already 'published' by driver-side functions. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 5d5a564..685757c 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -62,8 +62,6 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size) * * Remove all the buffers pending on a tty whether queued with data * or in the free ring. Must be called when the tty is no longer in use - * - * Locking: none */ void tty_buffer_free_all(struct tty_port *port) @@ -216,29 +214,26 @@ void tty_buffer_flush(struct tty_struct *tty) * * Make at least size bytes of linear space available for the tty * buffer. If we fail return the size we managed to find. - * - * Locking: Takes port->buf.lock */ int tty_buffer_request_room(struct tty_port *port, size_t size) { struct tty_bufhead *buf = &port->buf; struct tty_buffer *b, *n; int left; - unsigned long flags; - spin_lock_irqsave(&buf->lock, flags); + b = buf->tail; left = b->size - b->used; if (left < size) { /* This is the slow path - looking for new buffers to use */ if ((n = tty_buffer_alloc(port, size)) != NULL) { - b->next = n; - b->commit = b->used; buf->tail = n; + b->commit = b->used; + smp_mb(); + b->next = n; } else size = left; } - spin_unlock_irqrestore(&buf->lock, flags); return size; } EXPORT_SYMBOL_GPL(tty_buffer_request_room); @@ -252,8 +247,6 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room); * * Queue a series of bytes to the tty buffering. All the characters * passed are marked with the supplied flag. Returns the number added. - * - * Locking: Called functions may take port->buf.lock */ int tty_insert_flip_string_fixed_flag(struct tty_port *port, @@ -288,8 +281,6 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag); * Queue a series of bytes to the tty buffering. For each character * the flags array indicates the status of the character. Returns the * number added. - * - * Locking: Called functions may take port->buf.lock */ int tty_insert_flip_string_flags(struct tty_port *port, @@ -324,19 +315,14 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags); * processing by the line discipline. * Note that this function can only be used when the low_latency flag * is unset. Otherwise the workqueue won't be flushed. - * - * Locking: Takes port->buf.lock */ void tty_schedule_flip(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - unsigned long flags; WARN_ON(port->low_latency); - spin_lock_irqsave(&buf->lock, flags); buf->tail->commit = buf->tail->used; - spin_unlock_irqrestore(&buf->lock, flags); schedule_work(&buf->work); } EXPORT_SYMBOL(tty_schedule_flip); @@ -352,8 +338,6 @@ EXPORT_SYMBOL(tty_schedule_flip); * accounted for as ready for normal characters. This is used for drivers * that need their own block copy routines into the buffer. There is no * guarantee the buffer is a DMA target! - * - * Locking: May call functions taking port->buf.lock */ int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars, @@ -382,8 +366,6 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string); * accounted for as ready for characters. This is used for drivers * that need their own block copy routines into the buffer. There is no * guarantee the buffer is a DMA target! - * - * Locking: May call functions taking port->buf.lock */ int tty_prepare_flip_string_flags(struct tty_port *port, @@ -511,18 +493,13 @@ void tty_flush_to_ldisc(struct tty_struct *tty) * * In the event of the queue being busy for flipping the work will be * held off and retried later. - * - * Locking: tty buffer lock. Driver locks in low latency mode. */ void tty_flip_buffer_push(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - unsigned long flags; - spin_lock_irqsave(&buf->lock, flags); buf->tail->commit = buf->tail->used; - spin_unlock_irqrestore(&buf->lock, flags); if (port->low_latency) flush_to_ldisc(&buf->work); -- cgit v0.10.2 From e9975fdec0138f1b2a85b9624e41660abd9865d4 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:10 -0400 Subject: tty: Ensure single-threaded flip buffer consumer with mutex The buffer work may race with parallel tty_buffer_flush. Use a mutex to guarantee exclusive modify access to the head flip buffer. Remove the unneeded spin lock. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c index 654f601..0d52de3 100644 --- a/drivers/staging/dgrp/dgrp_tty.c +++ b/drivers/staging/dgrp/dgrp_tty.c @@ -1120,7 +1120,9 @@ static void dgrp_tty_close(struct tty_struct *tty, struct file *file) if (!sent_printer_offstr) dgrp_tty_flush_buffer(tty); + spin_unlock_irqrestore(&nd->nd_lock, lock_flags); tty_ldisc_flush(tty); + spin_lock_irqsave(&nd->nd_lock, lock_flags); break; } diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 685757c..c3c606c 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -157,8 +157,6 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) * flush all the buffers containing receive data. Caller must * hold the buffer lock and must have ensured no parallel flush to * ldisc is running. - * - * Locking: Caller must hold tty->buf.lock */ static void __tty_buffer_flush(struct tty_port *port) @@ -182,29 +180,29 @@ static void __tty_buffer_flush(struct tty_port *port) * being processed by flush_to_ldisc then we defer the processing * to that function * - * Locking: none + * Locking: takes flush_mutex to ensure single-threaded flip buffer + * 'consumer' */ void tty_buffer_flush(struct tty_struct *tty) { struct tty_port *port = tty->port; struct tty_bufhead *buf = &port->buf; - unsigned long flags; - - spin_lock_irqsave(&buf->lock, flags); + mutex_lock(&buf->flush_mutex); /* If the data is being pushed to the tty layer then we can't process it here. Instead set a flag and the flush_to_ldisc path will process the flush request before it exits */ if (test_bit(TTYP_FLUSHING, &port->iflags)) { set_bit(TTYP_FLUSHPENDING, &port->iflags); - spin_unlock_irqrestore(&buf->lock, flags); + mutex_unlock(&buf->flush_mutex); wait_event(tty->read_wait, test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0); return; - } else - __tty_buffer_flush(port); - spin_unlock_irqrestore(&buf->lock, flags); + } + + __tty_buffer_flush(port); + mutex_unlock(&buf->flush_mutex); } /** @@ -408,9 +406,10 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count) * This routine is called out of the software interrupt to flush data * from the buffer chain to the line discipline. * - * Locking: holds tty->buf.lock to guard buffer list. Drops the lock - * while invoking the line discipline receive_buf method. The - * receive_buf method is single threaded for each tty instance. + * The receive_buf method is single threaded for each tty instance. + * + * Locking: takes flush_mutex to ensure single-threaded flip buffer + * 'consumer' */ static void flush_to_ldisc(struct work_struct *work) @@ -418,7 +417,6 @@ static void flush_to_ldisc(struct work_struct *work) struct tty_port *port = container_of(work, struct tty_port, buf.work); struct tty_bufhead *buf = &port->buf; struct tty_struct *tty; - unsigned long flags; struct tty_ldisc *disc; tty = port->itty; @@ -429,7 +427,7 @@ static void flush_to_ldisc(struct work_struct *work) if (disc == NULL) return; - spin_lock_irqsave(&buf->lock, flags); + mutex_lock(&buf->flush_mutex); if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) { while (1) { @@ -444,11 +442,13 @@ static void flush_to_ldisc(struct work_struct *work) tty_buffer_free(port, head); continue; } - spin_unlock_irqrestore(&buf->lock, flags); + + mutex_unlock(&buf->flush_mutex); count = receive_buf(tty, head, count); - spin_lock_irqsave(&buf->lock, flags); + mutex_lock(&buf->flush_mutex); + /* Ldisc or user is trying to flush the buffers. We may have a deferred request to flush the input buffer, if so pull the chain under the lock @@ -464,7 +464,7 @@ static void flush_to_ldisc(struct work_struct *work) clear_bit(TTYP_FLUSHING, &port->iflags); } - spin_unlock_irqrestore(&buf->lock, flags); + mutex_unlock(&buf->flush_mutex); tty_ldisc_deref(disc); } @@ -514,15 +514,13 @@ EXPORT_SYMBOL(tty_flip_buffer_push); * * Set up the initial state of the buffer management for a tty device. * Must be called before the other tty buffer functions are used. - * - * Locking: none */ void tty_buffer_init(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - spin_lock_init(&buf->lock); + mutex_init(&buf->flush_mutex); tty_buffer_reset(&buf->sentinel, 0); buf->head = &buf->sentinel; buf->tail = &buf->sentinel; diff --git a/include/linux/tty.h b/include/linux/tty.h index 7c12454..1c8fef0 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -66,7 +66,7 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs) struct tty_bufhead { struct work_struct work; - spinlock_t lock; + struct mutex flush_mutex; struct tty_buffer sentinel; struct tty_buffer *head; /* Queue head */ struct tty_buffer *tail; /* Active buffer */ -- cgit v0.10.2 From d7a68be4f265be10e24be931c257af30ca55566b Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:11 -0400 Subject: tty: Only perform flip buffer flush from tty_buffer_flush() Now that dropping the buffer lock is not necessary (as result of converting the spin lock to a mutex), the flip buffer flush no longer needs to be handled by the buffer work. Simply signal a flush is required; the buffer work will exit the i/o loop, which allows tty_buffer_flush() to proceed. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index c3c606c..39cae61 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -189,19 +189,11 @@ void tty_buffer_flush(struct tty_struct *tty) struct tty_port *port = tty->port; struct tty_bufhead *buf = &port->buf; - mutex_lock(&buf->flush_mutex); - /* If the data is being pushed to the tty layer then we can't - process it here. Instead set a flag and the flush_to_ldisc - path will process the flush request before it exits */ - if (test_bit(TTYP_FLUSHING, &port->iflags)) { - set_bit(TTYP_FLUSHPENDING, &port->iflags); - mutex_unlock(&buf->flush_mutex); - wait_event(tty->read_wait, - test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0); - return; - } + set_bit(TTYP_FLUSHPENDING, &port->iflags); + mutex_lock(&buf->flush_mutex); __tty_buffer_flush(port); + clear_bit(TTYP_FLUSHPENDING, &port->iflags); mutex_unlock(&buf->flush_mutex); } @@ -429,39 +421,26 @@ static void flush_to_ldisc(struct work_struct *work) mutex_lock(&buf->flush_mutex); - if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) { - while (1) { - struct tty_buffer *head = buf->head; - int count; - - count = head->commit - head->read; - if (!count) { - if (head->next == NULL) - break; - buf->head = head->next; - tty_buffer_free(port, head); - continue; - } - - mutex_unlock(&buf->flush_mutex); - - count = receive_buf(tty, head, count); - - mutex_lock(&buf->flush_mutex); - - /* Ldisc or user is trying to flush the buffers. - We may have a deferred request to flush the - input buffer, if so pull the chain under the lock - and empty the queue */ - if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) { - __tty_buffer_flush(port); - clear_bit(TTYP_FLUSHPENDING, &port->iflags); - wake_up(&tty->read_wait); - break; - } else if (!count) + while (1) { + struct tty_buffer *head = buf->head; + int count; + + /* Ldisc or user is trying to flush the buffers. */ + if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) + break; + + count = head->commit - head->read; + if (!count) { + if (head->next == NULL) break; + buf->head = head->next; + tty_buffer_free(port, head); + continue; } - clear_bit(TTYP_FLUSHING, &port->iflags); + + count = receive_buf(tty, head, count); + if (!count) + break; } mutex_unlock(&buf->flush_mutex); diff --git a/include/linux/tty.h b/include/linux/tty.h index 1c8fef0..1d5bacc 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -213,7 +213,6 @@ struct tty_port { wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ unsigned long iflags; /* TTYP_ internal flags */ -#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */ #define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */ unsigned char console:1, /* port is a console */ low_latency:1; /* direct buffer flush */ -- cgit v0.10.2 From 8c1fb49ba107c7db9441ef6ec0ab5830d112cc2a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:12 -0400 Subject: tty: Avoid false-sharing flip buffer ptrs Separate the head and tail ptrs to avoid cache-line contention (so called 'false-sharing') between concurrent threads. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/tty.h b/include/linux/tty.h index 1d5bacc..b8e8adf 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -65,13 +65,13 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs) struct tty_bufhead { + struct tty_buffer *head; /* Queue head */ struct work_struct work; struct mutex flush_mutex; struct tty_buffer sentinel; - struct tty_buffer *head; /* Queue head */ - struct tty_buffer *tail; /* Active buffer */ struct llist_head free; /* Free queue head */ atomic_t memory_used; /* In-use buffers excluding free list */ + struct tty_buffer *tail; /* Active buffer */ }; /* * When a break, frame error, or parity error happens, these codes are -- cgit v0.10.2 From 0f56bd2f6a97d8b0eb5c8f9bc04b83a6c16d1d48 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:13 -0400 Subject: tty: Use non-atomic state to signal flip buffer flush pending Atomic bit ops are no longer required to indicate a flip buffer flush is pending, as the flush_mutex is sufficient barrier. Remove the unnecessary port .iflags field and localize flip buffer state to struct tty_bufhead. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 39cae61..fb042b9 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -189,11 +189,11 @@ void tty_buffer_flush(struct tty_struct *tty) struct tty_port *port = tty->port; struct tty_bufhead *buf = &port->buf; - set_bit(TTYP_FLUSHPENDING, &port->iflags); + buf->flushpending = 1; mutex_lock(&buf->flush_mutex); __tty_buffer_flush(port); - clear_bit(TTYP_FLUSHPENDING, &port->iflags); + buf->flushpending = 0; mutex_unlock(&buf->flush_mutex); } @@ -426,7 +426,7 @@ static void flush_to_ldisc(struct work_struct *work) int count; /* Ldisc or user is trying to flush the buffers. */ - if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) + if (buf->flushpending) break; count = head->commit - head->read; @@ -505,6 +505,7 @@ void tty_buffer_init(struct tty_port *port) buf->tail = &buf->sentinel; init_llist_head(&buf->free); atomic_set(&buf->memory_used, 0); + buf->flushpending = 0; INIT_WORK(&buf->work, flush_to_ldisc); } diff --git a/include/linux/tty.h b/include/linux/tty.h index b8e8adf..991575f 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -68,6 +68,7 @@ struct tty_bufhead { struct tty_buffer *head; /* Queue head */ struct work_struct work; struct mutex flush_mutex; + unsigned int flushpending:1; struct tty_buffer sentinel; struct llist_head free; /* Free queue head */ atomic_t memory_used; /* In-use buffers excluding free list */ @@ -212,8 +213,6 @@ struct tty_port { wait_queue_head_t close_wait; /* Close waiters */ wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ - unsigned long iflags; /* TTYP_ internal flags */ -#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */ unsigned char console:1, /* port is a console */ low_latency:1; /* direct buffer flush */ struct mutex mutex; /* Locking */ -- cgit v0.10.2 From 47aa658a015440906def231f54685c4d5d49dc38 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:14 -0400 Subject: tty: Merge __tty_flush_buffer() into lone call site __tty_flush_buffer() is now only called by tty_flush_buffer(); merge functions. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index fb042b9..dbe4a71 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -151,28 +151,6 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) } /** - * __tty_buffer_flush - flush full tty buffers - * @tty: tty to flush - * - * flush all the buffers containing receive data. Caller must - * hold the buffer lock and must have ensured no parallel flush to - * ldisc is running. - */ - -static void __tty_buffer_flush(struct tty_port *port) -{ - struct tty_bufhead *buf = &port->buf; - struct tty_buffer *next; - - while ((next = buf->head->next) != NULL) { - tty_buffer_free(port, buf->head); - buf->head = next; - } - WARN_ON(buf->head != buf->tail); - buf->head->read = buf->head->commit; -} - -/** * tty_buffer_flush - flush full tty buffers * @tty: tty to flush * @@ -188,11 +166,16 @@ void tty_buffer_flush(struct tty_struct *tty) { struct tty_port *port = tty->port; struct tty_bufhead *buf = &port->buf; + struct tty_buffer *next; buf->flushpending = 1; mutex_lock(&buf->flush_mutex); - __tty_buffer_flush(port); + while ((next = buf->head->next) != NULL) { + tty_buffer_free(port, buf->head); + buf->head = next; + } + buf->head->read = buf->head->commit; buf->flushpending = 0; mutex_unlock(&buf->flush_mutex); } -- cgit v0.10.2 From a7c8d58c79853adeebf0a1ddc9c63e433b4d97f1 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:15 -0400 Subject: tty: Fix unsafe vt paste_selection() Convert the tty_buffer_flush() exclusion mechanism to a public interface - tty_buffer_lock/unlock_exclusive() - and use the interface to safely write the paste selection to the line discipline. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index dbe4a71..f22e116 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -30,6 +30,42 @@ /** + * tty_buffer_lock_exclusive - gain exclusive access to buffer + * tty_buffer_unlock_exclusive - release exclusive access + * + * @port - tty_port owning the flip buffer + * + * Guarantees safe use of the line discipline's receive_buf() method by + * excluding the buffer work and any pending flush from using the flip + * buffer. Data can continue to be added concurrently to the flip buffer + * from the driver side. + * + * On release, the buffer work is restarted if there is data in the + * flip buffer + */ + +void tty_buffer_lock_exclusive(struct tty_port *port) +{ + struct tty_bufhead *buf = &port->buf; + + atomic_inc(&buf->priority); + mutex_lock(&buf->lock); +} + +void tty_buffer_unlock_exclusive(struct tty_port *port) +{ + struct tty_bufhead *buf = &port->buf; + int restart; + + restart = buf->head->commit != buf->head->read; + + atomic_dec(&buf->priority); + mutex_unlock(&buf->lock); + if (restart) + queue_work(system_unbound_wq, &buf->work); +} + +/** * tty_buffer_space_avail - return unused buffer space * @port - tty_port owning the flip buffer * @@ -158,7 +194,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) * being processed by flush_to_ldisc then we defer the processing * to that function * - * Locking: takes flush_mutex to ensure single-threaded flip buffer + * Locking: takes buffer lock to ensure single-threaded flip buffer * 'consumer' */ @@ -168,16 +204,16 @@ void tty_buffer_flush(struct tty_struct *tty) struct tty_bufhead *buf = &port->buf; struct tty_buffer *next; - buf->flushpending = 1; + atomic_inc(&buf->priority); - mutex_lock(&buf->flush_mutex); + mutex_lock(&buf->lock); while ((next = buf->head->next) != NULL) { tty_buffer_free(port, buf->head); buf->head = next; } buf->head->read = buf->head->commit; - buf->flushpending = 0; - mutex_unlock(&buf->flush_mutex); + atomic_dec(&buf->priority); + mutex_unlock(&buf->lock); } /** @@ -383,7 +419,7 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count) * * The receive_buf method is single threaded for each tty instance. * - * Locking: takes flush_mutex to ensure single-threaded flip buffer + * Locking: takes buffer lock to ensure single-threaded flip buffer * 'consumer' */ @@ -402,14 +438,14 @@ static void flush_to_ldisc(struct work_struct *work) if (disc == NULL) return; - mutex_lock(&buf->flush_mutex); + mutex_lock(&buf->lock); while (1) { struct tty_buffer *head = buf->head; int count; - /* Ldisc or user is trying to flush the buffers. */ - if (buf->flushpending) + /* Ldisc or user is trying to gain exclusive access */ + if (atomic_read(&buf->priority)) break; count = head->commit - head->read; @@ -426,7 +462,7 @@ static void flush_to_ldisc(struct work_struct *work) break; } - mutex_unlock(&buf->flush_mutex); + mutex_unlock(&buf->lock); tty_ldisc_deref(disc); } @@ -482,13 +518,12 @@ void tty_buffer_init(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - mutex_init(&buf->flush_mutex); + mutex_init(&buf->lock); tty_buffer_reset(&buf->sentinel, 0); buf->head = &buf->sentinel; buf->tail = &buf->sentinel; init_llist_head(&buf->free); atomic_set(&buf->memory_used, 0); - buf->flushpending = 0; + atomic_set(&buf->priority, 0); INIT_WORK(&buf->work, flush_to_ldisc); } - diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 2ca8d6b..ea27804 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -24,6 +24,7 @@ #include #include #include +#include /* Don't take this from : 011-015 on the screen aren't spaces */ #define isspace(c) ((c) == ' ') @@ -346,8 +347,8 @@ int paste_selection(struct tty_struct *tty) console_unlock(); ld = tty_ldisc_ref_wait(tty); + tty_buffer_lock_exclusive(&vc->port); - /* FIXME: this is completely unsafe */ add_wait_queue(&vc->paste_wait, &wait); while (sel_buffer && sel_buffer_lth > pasted) { set_current_state(TASK_INTERRUPTIBLE); @@ -363,6 +364,7 @@ int paste_selection(struct tty_struct *tty) remove_wait_queue(&vc->paste_wait, &wait); __set_current_state(TASK_RUNNING); + tty_buffer_unlock_exclusive(&vc->port); tty_ldisc_deref(ld); return 0; } diff --git a/include/linux/tty.h b/include/linux/tty.h index 991575f..7a9a3b0 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -67,8 +67,8 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs) struct tty_bufhead { struct tty_buffer *head; /* Queue head */ struct work_struct work; - struct mutex flush_mutex; - unsigned int flushpending:1; + struct mutex lock; + atomic_t priority; struct tty_buffer sentinel; struct llist_head free; /* Free queue head */ atomic_t memory_used; /* In-use buffers excluding free list */ diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index 6944ed2..21ddd7d 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -32,4 +32,7 @@ static inline int tty_insert_flip_string(struct tty_port *port, return tty_insert_flip_string_fixed_flag(port, chars, TTY_NORMAL, size); } +extern void tty_buffer_lock_exclusive(struct tty_port *port); +extern void tty_buffer_unlock_exclusive(struct tty_port *port); + #endif /* _LINUX_TTY_FLIP_H */ -- cgit v0.10.2 From 9114fe8ccf1871f630d2c14cd60e5f455b015459 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 09:36:16 -0400 Subject: tty: Remove private constant from global namespace TTY_BUFFER_PAGE is only used within drivers/tty/tty_buffer.c; relocate to that file scope. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index f22e116..c043136f 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -28,6 +28,16 @@ */ #define TTYB_MEM_LIMIT 65536 +/* + * We default to dicing tty buffer allocations to this many characters + * in order to avoid multiple page allocations. We know the size of + * tty_buffer itself but it must also be taken into account that the + * the buffer is 256 byte aligned. See tty_buffer_find for the allocation + * logic this must match + */ + +#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) + /** * tty_buffer_lock_exclusive - gain exclusive access to buffer diff --git a/include/linux/tty.h b/include/linux/tty.h index 7a9a3b0..5fd5d6f 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -53,17 +53,6 @@ static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs) return (char *)char_buf_ptr(b, ofs) + b->size; } -/* - * We default to dicing tty buffer allocations to this many characters - * in order to avoid multiple page allocations. We know the size of - * tty_buffer itself but it must also be taken into account that the - * the buffer is 256 byte aligned. See tty_buffer_find for the allocation - * logic this must match - */ - -#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) - - struct tty_bufhead { struct tty_buffer *head; /* Queue head */ struct work_struct work; -- cgit v0.10.2 From ae56f3304107f70e26a389d845db76d6b949c114 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:21 -0400 Subject: n_tty: Remove unused echo_overrun field The echo_overrun field is only assigned and never tested; remove it. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index a69470e..c1c721f 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -96,7 +96,6 @@ struct n_tty_data { /* must hold exclusive termios_rwsem to reset these */ unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; - unsigned char echo_overrun:1; /* shared by producer and consumer */ char *read_buf; @@ -326,7 +325,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata) ldata->read_head = ldata->canon_head = ldata->read_tail = 0; mutex_lock(&ldata->echo_lock); - ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0; + ldata->echo_pos = ldata->echo_cnt = 0; mutex_unlock(&ldata->echo_lock); ldata->erasing = 0; @@ -782,14 +781,11 @@ static void process_echoes(struct tty_struct *tty) if (nr == 0) { ldata->echo_pos = 0; ldata->echo_cnt = 0; - ldata->echo_overrun = 0; } else { int num_processed = ldata->echo_cnt - nr; ldata->echo_pos += num_processed; ldata->echo_pos &= N_TTY_BUF_SIZE - 1; ldata->echo_cnt = nr; - if (num_processed > 0) - ldata->echo_overrun = 0; } mutex_unlock(&ldata->echo_lock); @@ -835,8 +831,6 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) ldata->echo_pos++; } ldata->echo_pos &= N_TTY_BUF_SIZE - 1; - - ldata->echo_overrun = 1; } else { new_byte_pos = ldata->echo_pos + ldata->echo_cnt; new_byte_pos &= N_TTY_BUF_SIZE - 1; -- cgit v0.10.2 From addaebccf63a8c9f7c7a62ce1ceb9da4307c5a1c Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:22 -0400 Subject: n_tty: Use separate head and tail indices for echo_buf Instead of using a single index to track the current echo_buf position, use a head index when adding to the buffer and a tail index when consuming from the buffer. Allow these head and tail indices to wrap at max representable value; perform modulo reduction via helper functions when accessing the buffer. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index c1c721f..18d72a0 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -108,7 +108,8 @@ struct n_tty_data { /* protected by echo_lock */ unsigned char *echo_buf; - unsigned int echo_pos; + size_t echo_head; + size_t echo_tail; unsigned int echo_cnt; /* protected by output lock */ @@ -135,6 +136,16 @@ static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i) return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)]; } +static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i) +{ + return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + +static inline unsigned char *echo_buf_addr(struct n_tty_data *ldata, size_t i) +{ + return &ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + static inline int tty_put_user(struct tty_struct *tty, unsigned char x, unsigned char __user *ptr) { @@ -325,7 +336,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata) ldata->read_head = ldata->canon_head = ldata->read_tail = 0; mutex_lock(&ldata->echo_lock); - ldata->echo_pos = ldata->echo_cnt = 0; + ldata->echo_head = ldata->echo_tail = ldata->echo_cnt = 0; mutex_unlock(&ldata->echo_lock); ldata->erasing = 0; @@ -640,8 +651,8 @@ static void process_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; int space, nr; + size_t tail; unsigned char c; - unsigned char *cp, *buf_end; if (!ldata->echo_cnt) return; @@ -651,14 +662,12 @@ static void process_echoes(struct tty_struct *tty) space = tty_write_room(tty); - buf_end = ldata->echo_buf + N_TTY_BUF_SIZE; - cp = ldata->echo_buf + ldata->echo_pos; + tail = ldata->echo_tail; nr = ldata->echo_cnt; while (nr > 0) { - c = *cp; + c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { unsigned char op; - unsigned char *opp; int no_space_left = 0; /* @@ -666,18 +675,13 @@ static void process_echoes(struct tty_struct *tty) * operation, get the next byte, which is either the * op code or a control character value. */ - opp = cp + 1; - if (opp == buf_end) - opp -= N_TTY_BUF_SIZE; - op = *opp; + op = echo_buf(ldata, tail + 1); switch (op) { unsigned int num_chars, num_bs; case ECHO_OP_ERASE_TAB: - if (++opp == buf_end) - opp -= N_TTY_BUF_SIZE; - num_chars = *opp; + num_chars = echo_buf(ldata, tail + 2); /* * Determine how many columns to go back @@ -703,20 +707,20 @@ static void process_echoes(struct tty_struct *tty) if (ldata->column > 0) ldata->column--; } - cp += 3; + tail += 3; nr -= 3; break; case ECHO_OP_SET_CANON_COL: ldata->canon_column = ldata->column; - cp += 2; + tail += 2; nr -= 2; break; case ECHO_OP_MOVE_BACK_COL: if (ldata->column > 0) ldata->column--; - cp += 2; + tail += 2; nr -= 2; break; @@ -729,7 +733,7 @@ static void process_echoes(struct tty_struct *tty) tty_put_char(tty, ECHO_OP_START); ldata->column++; space--; - cp += 2; + tail += 2; nr -= 2; break; @@ -751,7 +755,7 @@ static void process_echoes(struct tty_struct *tty) tty_put_char(tty, op ^ 0100); ldata->column += 2; space -= 2; - cp += 2; + tail += 2; nr -= 2; } @@ -769,24 +773,13 @@ static void process_echoes(struct tty_struct *tty) tty_put_char(tty, c); space -= 1; } - cp += 1; + tail += 1; nr -= 1; } - - /* When end of circular buffer reached, wrap around */ - if (cp >= buf_end) - cp -= N_TTY_BUF_SIZE; } - if (nr == 0) { - ldata->echo_pos = 0; - ldata->echo_cnt = 0; - } else { - int num_processed = ldata->echo_cnt - nr; - ldata->echo_pos += num_processed; - ldata->echo_pos &= N_TTY_BUF_SIZE - 1; - ldata->echo_cnt = nr; - } + ldata->echo_tail = tail; + ldata->echo_cnt = nr; mutex_unlock(&ldata->echo_lock); mutex_unlock(&ldata->output_lock); @@ -807,37 +800,26 @@ static void process_echoes(struct tty_struct *tty) static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { - int new_byte_pos; - if (ldata->echo_cnt == N_TTY_BUF_SIZE) { - /* Circular buffer is already at capacity */ - new_byte_pos = ldata->echo_pos; - + size_t head = ldata->echo_head; /* * Since the buffer start position needs to be advanced, * be sure to step by a whole operation byte group. */ - if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) { - if (ldata->echo_buf[(ldata->echo_pos + 1) & - (N_TTY_BUF_SIZE - 1)] == - ECHO_OP_ERASE_TAB) { - ldata->echo_pos += 3; + if (echo_buf(ldata, head) == ECHO_OP_START) { + if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) { + ldata->echo_tail += 3; ldata->echo_cnt -= 2; } else { - ldata->echo_pos += 2; + ldata->echo_tail += 2; ldata->echo_cnt -= 1; } - } else { - ldata->echo_pos++; - } - ldata->echo_pos &= N_TTY_BUF_SIZE - 1; - } else { - new_byte_pos = ldata->echo_pos + ldata->echo_cnt; - new_byte_pos &= N_TTY_BUF_SIZE - 1; + } else + ldata->echo_tail++; + } else ldata->echo_cnt++; - } - ldata->echo_buf[new_byte_pos] = c; + *echo_buf_addr(ldata, ldata->echo_head++) = c; } /** -- cgit v0.10.2 From 862eeffef1b465a12412f4ae6e5987ae292c968d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:23 -0400 Subject: n_tty: Replace echo_cnt with computed value Prepare for lockless echo_buf handling; compute current byte count of echo_buf from head and tail indices. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 18d72a0..8406a23 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -110,7 +110,6 @@ struct n_tty_data { unsigned char *echo_buf; size_t echo_head; size_t echo_tail; - unsigned int echo_cnt; /* protected by output lock */ unsigned int column; @@ -336,7 +335,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata) ldata->read_head = ldata->canon_head = ldata->read_tail = 0; mutex_lock(&ldata->echo_lock); - ldata->echo_head = ldata->echo_tail = ldata->echo_cnt = 0; + ldata->echo_head = ldata->echo_tail = 0; mutex_unlock(&ldata->echo_lock); ldata->erasing = 0; @@ -654,7 +653,7 @@ static void process_echoes(struct tty_struct *tty) size_t tail; unsigned char c; - if (!ldata->echo_cnt) + if (ldata->echo_head == ldata->echo_tail) return; mutex_lock(&ldata->output_lock); @@ -663,7 +662,7 @@ static void process_echoes(struct tty_struct *tty) space = tty_write_room(tty); tail = ldata->echo_tail; - nr = ldata->echo_cnt; + nr = ldata->echo_head - ldata->echo_tail; while (nr > 0) { c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { @@ -779,7 +778,6 @@ static void process_echoes(struct tty_struct *tty) } ldata->echo_tail = tail; - ldata->echo_cnt = nr; mutex_unlock(&ldata->echo_lock); mutex_unlock(&ldata->output_lock); @@ -800,24 +798,20 @@ static void process_echoes(struct tty_struct *tty) static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { - if (ldata->echo_cnt == N_TTY_BUF_SIZE) { + if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) { size_t head = ldata->echo_head; /* * Since the buffer start position needs to be advanced, * be sure to step by a whole operation byte group. */ if (echo_buf(ldata, head) == ECHO_OP_START) { - if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) { + if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) ldata->echo_tail += 3; - ldata->echo_cnt -= 2; - } else { + else ldata->echo_tail += 2; - ldata->echo_cnt -= 1; - } } else ldata->echo_tail++; - } else - ldata->echo_cnt++; + } *echo_buf_addr(ldata, ldata->echo_head++) = c; } -- cgit v0.10.2 From 17bd79074003d73f2207289b9d3ce0553d000856 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:24 -0400 Subject: n_tty: Remove echo_lock Adding data to echo_buf (via add_echo_byte()) is guaranteed to be single-threaded, since all callers are from the n_tty_receive_buf() path. Processing the echo_buf can be called from either the n_tty_receive_buf() path or the n_tty_write() path; however, these callers are already serialized by output_lock. Publish cumulative echo_head changes to echo_commit; process echo_buf from echo_tail to echo_commit; remove echo_lock. On echo_buf overrun, claim output_lock to serialize changes to echo_tail. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 8406a23..3b49945 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -106,10 +106,10 @@ struct n_tty_data { /* consumer-published */ size_t read_tail; - /* protected by echo_lock */ unsigned char *echo_buf; size_t echo_head; size_t echo_tail; + size_t echo_commit; /* protected by output lock */ unsigned int column; @@ -117,7 +117,6 @@ struct n_tty_data { struct mutex atomic_read_lock; struct mutex output_lock; - struct mutex echo_lock; }; static inline size_t read_cnt(struct n_tty_data *ldata) @@ -333,10 +332,7 @@ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata) static void reset_buffer_flags(struct n_tty_data *ldata) { ldata->read_head = ldata->canon_head = ldata->read_tail = 0; - - mutex_lock(&ldata->echo_lock); - ldata->echo_head = ldata->echo_tail = 0; - mutex_unlock(&ldata->echo_lock); + ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0; ldata->erasing = 0; bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); @@ -642,8 +638,7 @@ break_out: * are prioritized. Also, when control characters are echoed with a * prefixed "^", the pair is treated atomically and thus not separated. * - * Locking: output_lock to protect column state and space left, - * echo_lock to protect the echo buffer + * Locking: output_lock to protect column state and space left */ static void process_echoes(struct tty_struct *tty) @@ -653,16 +648,15 @@ static void process_echoes(struct tty_struct *tty) size_t tail; unsigned char c; - if (ldata->echo_head == ldata->echo_tail) + if (ldata->echo_commit == ldata->echo_tail) return; mutex_lock(&ldata->output_lock); - mutex_lock(&ldata->echo_lock); space = tty_write_room(tty); tail = ldata->echo_tail; - nr = ldata->echo_head - ldata->echo_tail; + nr = ldata->echo_commit - ldata->echo_tail; while (nr > 0) { c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { @@ -779,13 +773,21 @@ static void process_echoes(struct tty_struct *tty) ldata->echo_tail = tail; - mutex_unlock(&ldata->echo_lock); mutex_unlock(&ldata->output_lock); if (tty->ops->flush_chars) tty->ops->flush_chars(tty); } +static void commit_echoes(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + smp_mb(); + ldata->echo_commit = ldata->echo_head; + process_echoes(tty); +} + /** * add_echo_byte - add a byte to the echo buffer * @c: unicode byte to echo @@ -793,13 +795,16 @@ static void process_echoes(struct tty_struct *tty) * * Add a character or operation byte to the echo buffer. * - * Should be called under the echo lock to protect the echo buffer. + * Locks: may claim output_lock to prevent concurrent modify of + * echo_tail by process_echoes(). */ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) { size_t head = ldata->echo_head; + + mutex_lock(&ldata->output_lock); /* * Since the buffer start position needs to be advanced, * be sure to step by a whole operation byte group. @@ -811,6 +816,7 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) ldata->echo_tail += 2; } else ldata->echo_tail++; + mutex_unlock(&ldata->output_lock); } *echo_buf_addr(ldata, ldata->echo_head++) = c; @@ -821,16 +827,12 @@ static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) * @ldata: n_tty data * * Add an operation to the echo buffer to move back one column. - * - * Locking: echo_lock to protect the echo buffer */ static void echo_move_back_col(struct n_tty_data *ldata) { - mutex_lock(&ldata->echo_lock); add_echo_byte(ECHO_OP_START, ldata); add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata); - mutex_unlock(&ldata->echo_lock); } /** @@ -839,16 +841,12 @@ static void echo_move_back_col(struct n_tty_data *ldata) * * Add an operation to the echo buffer to set the canon column * to the current column. - * - * Locking: echo_lock to protect the echo buffer */ static void echo_set_canon_col(struct n_tty_data *ldata) { - mutex_lock(&ldata->echo_lock); add_echo_byte(ECHO_OP_START, ldata); add_echo_byte(ECHO_OP_SET_CANON_COL, ldata); - mutex_unlock(&ldata->echo_lock); } /** @@ -864,15 +862,11 @@ static void echo_set_canon_col(struct n_tty_data *ldata) * of input. This information will be used later, along with * canon column (if applicable), to go back the correct number * of columns. - * - * Locking: echo_lock to protect the echo buffer */ static void echo_erase_tab(unsigned int num_chars, int after_tab, struct n_tty_data *ldata) { - mutex_lock(&ldata->echo_lock); - add_echo_byte(ECHO_OP_START, ldata); add_echo_byte(ECHO_OP_ERASE_TAB, ldata); @@ -884,8 +878,6 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab, num_chars |= 0x80; add_echo_byte(num_chars, ldata); - - mutex_unlock(&ldata->echo_lock); } /** @@ -897,20 +889,16 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab, * L_ECHO(tty) is true. Called from the driver receive_buf path. * * This variant does not treat control characters specially. - * - * Locking: echo_lock to protect the echo buffer */ static void echo_char_raw(unsigned char c, struct n_tty_data *ldata) { - mutex_lock(&ldata->echo_lock); if (c == ECHO_OP_START) { add_echo_byte(ECHO_OP_START, ldata); add_echo_byte(ECHO_OP_START, ldata); } else { add_echo_byte(c, ldata); } - mutex_unlock(&ldata->echo_lock); } /** @@ -923,16 +911,12 @@ static void echo_char_raw(unsigned char c, struct n_tty_data *ldata) * * This variant tags control characters to be echoed as "^X" * (where X is the letter representing the control char). - * - * Locking: echo_lock to protect the echo buffer */ static void echo_char(unsigned char c, struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - mutex_lock(&ldata->echo_lock); - if (c == ECHO_OP_START) { add_echo_byte(ECHO_OP_START, ldata); add_echo_byte(ECHO_OP_START, ldata); @@ -941,8 +925,6 @@ static void echo_char(unsigned char c, struct tty_struct *tty) add_echo_byte(ECHO_OP_START, ldata); add_echo_byte(c, ldata); } - - mutex_unlock(&ldata->echo_lock); } /** @@ -1284,7 +1266,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (ldata->canon_head == ldata->read_head) echo_set_canon_col(ldata); echo_char(c, tty); - process_echoes(tty); + commit_echoes(tty); } if (parmrk) put_tty_queue(c, ldata); @@ -1295,7 +1277,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_IXON(tty)) { if (c == START_CHAR(tty)) { start_tty(tty); - process_echoes(tty); + commit_echoes(tty); return; } if (c == STOP_CHAR(tty)) { @@ -1326,7 +1308,7 @@ send_signal: start_tty(tty); if (L_ECHO(tty)) { echo_char(c, tty); - process_echoes(tty); + commit_echoes(tty); } isig(signal, tty); return; @@ -1345,7 +1327,7 @@ send_signal: if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) || (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { eraser(c, tty); - process_echoes(tty); + commit_echoes(tty); return; } if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { @@ -1355,7 +1337,7 @@ send_signal: if (L_ECHOCTL(tty)) { echo_char_raw('^', ldata); echo_char_raw('\b', ldata); - process_echoes(tty); + commit_echoes(tty); } } return; @@ -1371,7 +1353,7 @@ send_signal: echo_char(read_buf(ldata, tail), tty); tail++; } - process_echoes(tty); + commit_echoes(tty); return; } if (c == '\n') { @@ -1382,7 +1364,7 @@ send_signal: } if (L_ECHO(tty) || L_ECHONL(tty)) { echo_char_raw('\n', ldata); - process_echoes(tty); + commit_echoes(tty); } goto handle_newline; } @@ -1411,7 +1393,7 @@ send_signal: if (ldata->canon_head == ldata->read_head) echo_set_canon_col(ldata); echo_char(c, tty); - process_echoes(tty); + commit_echoes(tty); } /* * XXX does PARMRK doubling happen for @@ -1448,7 +1430,7 @@ handle_newline: echo_set_canon_col(ldata); echo_char(c, tty); } - process_echoes(tty); + commit_echoes(tty); } if (parmrk) @@ -1713,7 +1695,6 @@ static int n_tty_open(struct tty_struct *tty) ldata->overrun_time = jiffies; mutex_init(&ldata->atomic_read_lock); mutex_init(&ldata->output_lock); - mutex_init(&ldata->echo_lock); /* These are ugly. Currently a malloc failure here can panic */ ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); -- cgit v0.10.2 From 019ebdf9f26fd2e43b9e1af576835183e95dc82e Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:25 -0400 Subject: n_tty: Eliminate echo_commit memory barrier Use output_lock mutex as a memory barrier when storing echo_commit. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 3b49945..0f76b90 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -638,21 +638,16 @@ break_out: * are prioritized. Also, when control characters are echoed with a * prefixed "^", the pair is treated atomically and thus not separated. * - * Locking: output_lock to protect column state and space left + * Locking: callers must hold output_lock */ -static void process_echoes(struct tty_struct *tty) +static void __process_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; int space, nr; size_t tail; unsigned char c; - if (ldata->echo_commit == ldata->echo_tail) - return; - - mutex_lock(&ldata->output_lock); - space = tty_write_room(tty); tail = ldata->echo_tail; @@ -772,20 +767,34 @@ static void process_echoes(struct tty_struct *tty) } ldata->echo_tail = tail; +} + +static void commit_echoes(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + mutex_lock(&ldata->output_lock); + ldata->echo_commit = ldata->echo_head; + __process_echoes(tty); mutex_unlock(&ldata->output_lock); if (tty->ops->flush_chars) tty->ops->flush_chars(tty); } -static void commit_echoes(struct tty_struct *tty) +static void process_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - smp_mb(); - ldata->echo_commit = ldata->echo_head; - process_echoes(tty); + if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail) + return; + + mutex_lock(&ldata->output_lock); + __process_echoes(tty); + mutex_unlock(&ldata->output_lock); + + if (tty->ops->flush_chars) + tty->ops->flush_chars(tty); } /** -- cgit v0.10.2 From cbfd0340ae1993378fd47179db949e050e16e697 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:26 -0400 Subject: n_tty: Process echoes in blocks Byte-by-byte echo output is painfully slow, requiring a lock/unlock cycle for every input byte. Instead, perform the echo output in blocks of 256 characters, and at least once per flip buffer receive. Enough space is reserved in the echo buffer to guarantee a full block can be saved without overrunning the echo output. Overrun is prevented by discarding the oldest echoes until enough space exists in the echo buffer to receive at least a full block of new echoes. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0f76b90..20983af 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -74,6 +74,11 @@ #define ECHO_OP_SET_CANON_COL 0x81 #define ECHO_OP_ERASE_TAB 0x82 +#define ECHO_COMMIT_WATERMARK 256 +#define ECHO_BLOCK 256 +#define ECHO_DISCARD_WATERMARK N_TTY_BUF_SIZE - (ECHO_BLOCK + 32) + + #undef N_TTY_TRACE #ifdef N_TTY_TRACE # define n_tty_trace(f, args...) trace_printk(f, ##args) @@ -766,15 +771,40 @@ static void __process_echoes(struct tty_struct *tty) } } + /* If the echo buffer is nearly full (so that the possibility exists + * of echo overrun before the next commit), then discard enough + * data at the tail to prevent a subsequent overrun */ + while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { + if (echo_buf(ldata, tail == ECHO_OP_START)) { + if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB) + tail += 3; + else + tail += 2; + } else + tail++; + } + ldata->echo_tail = tail; } static void commit_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; + size_t nr, old; + size_t head; + + head = ldata->echo_head; + old = ldata->echo_commit - ldata->echo_tail; + + /* Process committed echoes if the accumulated # of bytes + * is over the threshold (and try again each time another + * block is accumulated) */ + nr = head - ldata->echo_tail; + if (nr < ECHO_COMMIT_WATERMARK || (nr % ECHO_BLOCK > old % ECHO_BLOCK)) + return; mutex_lock(&ldata->output_lock); - ldata->echo_commit = ldata->echo_head; + ldata->echo_commit = head; __process_echoes(tty); mutex_unlock(&ldata->output_lock); @@ -797,37 +827,29 @@ static void process_echoes(struct tty_struct *tty) tty->ops->flush_chars(tty); } +static void flush_echoes(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_head) + return; + + mutex_lock(&ldata->output_lock); + ldata->echo_commit = ldata->echo_head; + __process_echoes(tty); + mutex_unlock(&ldata->output_lock); +} + /** * add_echo_byte - add a byte to the echo buffer * @c: unicode byte to echo * @ldata: n_tty data * * Add a character or operation byte to the echo buffer. - * - * Locks: may claim output_lock to prevent concurrent modify of - * echo_tail by process_echoes(). */ -static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) +static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { - if (ldata->echo_head - ldata->echo_tail == N_TTY_BUF_SIZE) { - size_t head = ldata->echo_head; - - mutex_lock(&ldata->output_lock); - /* - * Since the buffer start position needs to be advanced, - * be sure to step by a whole operation byte group. - */ - if (echo_buf(ldata, head) == ECHO_OP_START) { - if (echo_buf(ldata, head + 1) == ECHO_OP_ERASE_TAB) - ldata->echo_tail += 3; - else - ldata->echo_tail += 2; - } else - ldata->echo_tail++; - mutex_unlock(&ldata->output_lock); - } - *echo_buf_addr(ldata, ldata->echo_head++) = c; } @@ -1515,6 +1537,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, break; } } + + flush_echoes(tty); if (tty->ops->flush_chars) tty->ops->flush_chars(tty); } -- cgit v0.10.2 From bc5b1ec5860a9bf52842be4a3a9d96e19f06c11d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:27 -0400 Subject: n_tty: Only flush echo output if actually output Don't have the driver flush received echoes if no echoes were actually output. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 20983af..59f3f10 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -646,14 +646,14 @@ break_out: * Locking: callers must hold output_lock */ -static void __process_echoes(struct tty_struct *tty) +static size_t __process_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - int space, nr; + int space, old_space; size_t tail; unsigned char c; - space = tty_write_room(tty); + old_space = space = tty_write_room(tty); tail = ldata->echo_tail; nr = ldata->echo_commit - ldata->echo_tail; @@ -785,12 +785,13 @@ static void __process_echoes(struct tty_struct *tty) } ldata->echo_tail = tail; + return old_space - space; } static void commit_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - size_t nr, old; + size_t nr, old, echoed; size_t head; head = ldata->echo_head; @@ -805,25 +806,26 @@ static void commit_echoes(struct tty_struct *tty) mutex_lock(&ldata->output_lock); ldata->echo_commit = head; - __process_echoes(tty); + echoed = __process_echoes(tty); mutex_unlock(&ldata->output_lock); - if (tty->ops->flush_chars) + if (echoed && tty->ops->flush_chars) tty->ops->flush_chars(tty); } static void process_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; + size_t echoed; if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail) return; mutex_lock(&ldata->output_lock); - __process_echoes(tty); + echoed = __process_echoes(tty); mutex_unlock(&ldata->output_lock); - if (tty->ops->flush_chars) + if (echoed && tty->ops->flush_chars) tty->ops->flush_chars(tty); } -- cgit v0.10.2 From 29c7c5ca36d9c132cf9c37a09bc43626e790fb4c Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:28 -0400 Subject: n_tty: Eliminate counter in __process_echoes Since neither echo_commit nor echo_tail can change for the duration of __process_echoes loop, substitute index comparison for the snapshot counter. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 59f3f10..7f15b26 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -656,8 +656,7 @@ static size_t __process_echoes(struct tty_struct *tty) old_space = space = tty_write_room(tty); tail = ldata->echo_tail; - nr = ldata->echo_commit - ldata->echo_tail; - while (nr > 0) { + while (ldata->echo_commit != tail) { c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { unsigned char op; @@ -701,20 +700,17 @@ static size_t __process_echoes(struct tty_struct *tty) ldata->column--; } tail += 3; - nr -= 3; break; case ECHO_OP_SET_CANON_COL: ldata->canon_column = ldata->column; tail += 2; - nr -= 2; break; case ECHO_OP_MOVE_BACK_COL: if (ldata->column > 0) ldata->column--; tail += 2; - nr -= 2; break; case ECHO_OP_START: @@ -727,7 +723,6 @@ static size_t __process_echoes(struct tty_struct *tty) ldata->column++; space--; tail += 2; - nr -= 2; break; default: @@ -749,7 +744,6 @@ static size_t __process_echoes(struct tty_struct *tty) ldata->column += 2; space -= 2; tail += 2; - nr -= 2; } if (no_space_left) @@ -767,7 +761,6 @@ static size_t __process_echoes(struct tty_struct *tty) space -= 1; } tail += 1; - nr -= 1; } } -- cgit v0.10.2 From 9dfd16ddea9bdbc8343340e543732db0a467ae32 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:04:29 -0400 Subject: n_tty: Avoid false-sharing echo buffer indices Separate the head & commit indices from the tail index to avoid cache-line contention (so called 'false-sharing') between concurrent threads. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 7f15b26..d4d7135 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -90,6 +90,8 @@ struct n_tty_data { /* producer-published */ size_t read_head; size_t canon_head; + size_t echo_head; + size_t echo_commit; DECLARE_BITMAP(process_char_map, 256); /* private to n_tty_receive_overrun (single-threaded) */ @@ -105,20 +107,17 @@ struct n_tty_data { /* shared by producer and consumer */ char *read_buf; DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE); + unsigned char *echo_buf; int minimum_to_wake; /* consumer-published */ size_t read_tail; - unsigned char *echo_buf; - size_t echo_head; - size_t echo_tail; - size_t echo_commit; - /* protected by output lock */ unsigned int column; unsigned int canon_column; + size_t echo_tail; struct mutex atomic_read_lock; struct mutex output_lock; -- cgit v0.10.2 From 40d5e0905a03601d40cd4e46b8690093c2355d03 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:17 -0400 Subject: n_tty: Fix EOF push handling In canonical mode, an EOF which is not the first character of the line causes read() to complete and return the number of characters read so far (commonly referred to as EOF push). However, if the previous read() returned because the user buffer was full _and_ the next character is an EOF not at the beginning of the line, read() must not return 0, thus mistakenly indicating the end-of-file condition. The TTY_PUSH flag is used to indicate an EOF was received which is not at the beginning of the line. Because the EOF push condition is evaluated by a thread other than the read(), multiple EOF pushes can cause a premature end-of-file to be indicated. Instead, discover the 'EOF push as first read character' condition from the read() thread itself, and restart the i/o loop if detected. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d4d7135..25aaf1a 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -113,6 +113,7 @@ struct n_tty_data { /* consumer-published */ size_t read_tail; + size_t line_start; /* protected by output lock */ unsigned int column; @@ -337,6 +338,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata) { ldata->read_head = ldata->canon_head = ldata->read_tail = 0; ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0; + ldata->line_start = 0; ldata->erasing = 0; bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); @@ -1396,8 +1398,6 @@ send_signal: if (c == EOF_CHAR(tty)) { if (read_cnt(ldata) >= N_TTY_BUF_SIZE) return; - if (ldata->canon_head != ldata->read_head) - set_bit(TTY_PUSH, &tty->flags); c = __DISABLED_CHAR; goto handle_newline; } @@ -1604,6 +1604,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON; if (canon_change) { bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); + ldata->line_start = 0; ldata->canon_head = ldata->read_tail; ldata->erasing = 0; ldata->lnext = 0; @@ -1837,6 +1838,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, size_t eol; size_t tail; int ret, found = 0; + bool eof_push = 0; /* N.B. avoid overrun if nr == 0 */ n = min(*nr, read_cnt(ldata)); @@ -1863,8 +1865,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, n = (found + eol + size) & (N_TTY_BUF_SIZE - 1); c = n; - if (found && read_buf(ldata, eol) == __DISABLED_CHAR) + if (found && read_buf(ldata, eol) == __DISABLED_CHAR) { n--; + eof_push = !n && ldata->read_tail != ldata->line_start; + } n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n", __func__, eol, found, n, c, size, more); @@ -1887,9 +1891,11 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, smp_mb__after_clear_bit(); ldata->read_tail += c; - if (found) + if (found) { + ldata->line_start = ldata->read_tail; tty_audit_push(tty); - return 0; + } + return eof_push ? -EAGAIN : 0; } extern ssize_t redirected_tty_write(struct file *, const char __user *, @@ -1964,12 +1970,10 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, int c; int minimum, time; ssize_t retval = 0; - ssize_t size; long timeout; unsigned long flags; int packet; -do_it_again: c = job_control(tty, file); if (c < 0) return c; @@ -2076,7 +2080,10 @@ do_it_again: if (ldata->icanon && !L_EXTPROC(tty)) { retval = canon_copy_from_read_buf(tty, &b, &nr); - if (retval) + if (retval == -EAGAIN) { + retval = 0; + continue; + } else if (retval) break; } else { int uncopied; @@ -2104,15 +2111,8 @@ do_it_again: ldata->minimum_to_wake = minimum; __set_current_state(TASK_RUNNING); - size = b - buf; - if (size) { - retval = size; - if (nr) - clear_bit(TTY_PUSH, &tty->flags); - } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) { - up_read(&tty->termios_rwsem); - goto do_it_again; - } + if (b - buf) + retval = b - buf; n_tty_set_room(tty); up_read(&tty->termios_rwsem); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 1b32da6..2174698 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -664,7 +664,6 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) spin_lock_irq(&tty->ctrl_lock); clear_bit(TTY_THROTTLED, &tty->flags); - clear_bit(TTY_PUSH, &tty->flags); clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); put_pid(tty->session); put_pid(tty->pgrp); diff --git a/include/linux/tty.h b/include/linux/tty.h index 5fd5d6f..554b732 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -304,7 +304,6 @@ struct tty_file_private { #define TTY_EXCLUSIVE 3 /* Exclusive open mode */ #define TTY_DEBUG 4 /* Debugging */ #define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */ -#define TTY_PUSH 6 /* n_tty private */ #define TTY_CLOSING 7 /* ->close() in progress */ #define TTY_LDISC_OPEN 11 /* Line discipline is open */ #define TTY_PTY_LOCK 16 /* pty private */ -- cgit v0.10.2 From 8cb06c983822103da1cfe57b9901e60a00e61f67 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:18 -0400 Subject: n_tty: Remove alias ptrs in __receive_buf() The char and flag buffer local alias pointers, p and f, are unnecessary; remove them. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 25aaf1a..d6eba99 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1485,8 +1485,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; - const unsigned char *p; - char *f, flags = TTY_NORMAL; + char flags = TTY_NORMAL; char buf[64]; if (ldata->real_raw) { @@ -1508,19 +1507,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, } else { int i; - for (i = count, p = cp, f = fp; i; i--, p++) { - if (f) - flags = *f++; + for (i = count; i; i--, cp++) { + if (fp) + flags = *fp++; switch (flags) { case TTY_NORMAL: - n_tty_receive_char(tty, *p); + n_tty_receive_char(tty, *cp); break; case TTY_BREAK: n_tty_receive_break(tty); break; case TTY_PARITY: case TTY_FRAME: - n_tty_receive_parity_error(tty, *p); + n_tty_receive_parity_error(tty, *cp); break; case TTY_OVERRUN: n_tty_receive_overrun(tty); -- cgit v0.10.2 From 20bafb3d23d108bc0a896eb8b7c1501f4f649b77 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:19 -0400 Subject: n_tty: Move buffers into n_tty_data Reduce pointer reloading and improve locality-of-reference; allocate read_buf and echo_buf within struct n_tty_data. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d6eba99..51cbdd2 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -105,9 +105,9 @@ struct n_tty_data { unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; /* shared by producer and consumer */ - char *read_buf; + char read_buf[N_TTY_BUF_SIZE]; DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE); - unsigned char *echo_buf; + unsigned char echo_buf[N_TTY_BUF_SIZE]; int minimum_to_wake; @@ -1695,9 +1695,7 @@ static void n_tty_close(struct tty_struct *tty) if (tty->link) n_tty_packet_mode_flush(tty); - kfree(ldata->read_buf); - kfree(ldata->echo_buf); - kfree(ldata); + vfree(ldata); tty->disc_data = NULL; } @@ -1715,7 +1713,8 @@ static int n_tty_open(struct tty_struct *tty) { struct n_tty_data *ldata; - ldata = kzalloc(sizeof(*ldata), GFP_KERNEL); + /* Currently a malloc failure here can panic */ + ldata = vmalloc(sizeof(*ldata)); if (!ldata) goto err; @@ -1723,16 +1722,14 @@ static int n_tty_open(struct tty_struct *tty) mutex_init(&ldata->atomic_read_lock); mutex_init(&ldata->output_lock); - /* These are ugly. Currently a malloc failure here can panic */ - ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); - ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); - if (!ldata->read_buf || !ldata->echo_buf) - goto err_free_bufs; - tty->disc_data = ldata; reset_buffer_flags(tty->disc_data); ldata->column = 0; + ldata->canon_column = 0; ldata->minimum_to_wake = 1; + ldata->num_overrun = 0; + ldata->no_room = 0; + ldata->lnext = 0; tty->closing = 0; /* indicate buffer work may resume */ clear_bit(TTY_LDISC_HALTED, &tty->flags); @@ -1740,10 +1737,6 @@ static int n_tty_open(struct tty_struct *tty) tty_unthrottle(tty); return 0; -err_free_bufs: - kfree(ldata->read_buf); - kfree(ldata->echo_buf); - kfree(ldata); err: return -ENOMEM; } -- cgit v0.10.2 From 1bb9d562856279a217a4e581a803dee9bb48a708 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:20 -0400 Subject: n_tty: Rename process_char_map to char_map Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 51cbdd2..d598436 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -92,7 +92,7 @@ struct n_tty_data { size_t canon_head; size_t echo_head; size_t echo_commit; - DECLARE_BITMAP(process_char_map, 256); + DECLARE_BITMAP(char_map, 256); /* private to n_tty_receive_overrun (single-threaded) */ unsigned long overrun_time; @@ -1278,7 +1278,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) * handle specially, do shortcut processing to speed things * up. */ - if (!test_bit(c, ldata->process_char_map) || ldata->lnext) { + if (!test_bit(c, ldata->char_map) || ldata->lnext) { ldata->lnext = 0; parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { @@ -1618,41 +1618,38 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) || I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) || I_PARMRK(tty)) { - bitmap_zero(ldata->process_char_map, 256); + bitmap_zero(ldata->char_map, 256); if (I_IGNCR(tty) || I_ICRNL(tty)) - set_bit('\r', ldata->process_char_map); + set_bit('\r', ldata->char_map); if (I_INLCR(tty)) - set_bit('\n', ldata->process_char_map); + set_bit('\n', ldata->char_map); if (L_ICANON(tty)) { - set_bit(ERASE_CHAR(tty), ldata->process_char_map); - set_bit(KILL_CHAR(tty), ldata->process_char_map); - set_bit(EOF_CHAR(tty), ldata->process_char_map); - set_bit('\n', ldata->process_char_map); - set_bit(EOL_CHAR(tty), ldata->process_char_map); + set_bit(ERASE_CHAR(tty), ldata->char_map); + set_bit(KILL_CHAR(tty), ldata->char_map); + set_bit(EOF_CHAR(tty), ldata->char_map); + set_bit('\n', ldata->char_map); + set_bit(EOL_CHAR(tty), ldata->char_map); if (L_IEXTEN(tty)) { - set_bit(WERASE_CHAR(tty), - ldata->process_char_map); - set_bit(LNEXT_CHAR(tty), - ldata->process_char_map); - set_bit(EOL2_CHAR(tty), - ldata->process_char_map); + set_bit(WERASE_CHAR(tty), ldata->char_map); + set_bit(LNEXT_CHAR(tty), ldata->char_map); + set_bit(EOL2_CHAR(tty), ldata->char_map); if (L_ECHO(tty)) set_bit(REPRINT_CHAR(tty), - ldata->process_char_map); + ldata->char_map); } } if (I_IXON(tty)) { - set_bit(START_CHAR(tty), ldata->process_char_map); - set_bit(STOP_CHAR(tty), ldata->process_char_map); + set_bit(START_CHAR(tty), ldata->char_map); + set_bit(STOP_CHAR(tty), ldata->char_map); } if (L_ISIG(tty)) { - set_bit(INTR_CHAR(tty), ldata->process_char_map); - set_bit(QUIT_CHAR(tty), ldata->process_char_map); - set_bit(SUSP_CHAR(tty), ldata->process_char_map); + set_bit(INTR_CHAR(tty), ldata->char_map); + set_bit(QUIT_CHAR(tty), ldata->char_map); + set_bit(SUSP_CHAR(tty), ldata->char_map); } - clear_bit(__DISABLED_CHAR, ldata->process_char_map); + clear_bit(__DISABLED_CHAR, ldata->char_map); ldata->raw = 0; ldata->real_raw = 0; } else { -- cgit v0.10.2 From 781ad1c79379c723138945b633121a78e9e5485f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:21 -0400 Subject: n_tty: Simplify __receive_buf loop count Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d598436..4f20bec 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1505,21 +1505,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, memcpy(read_buf_addr(ldata, head), cp, n); ldata->read_head += n; } else { - int i; - - for (i = count; i; i--, cp++) { + while (count--) { if (fp) flags = *fp++; switch (flags) { case TTY_NORMAL: - n_tty_receive_char(tty, *cp); + n_tty_receive_char(tty, *cp++); break; case TTY_BREAK: n_tty_receive_break(tty); break; case TTY_PARITY: case TTY_FRAME: - n_tty_receive_parity_error(tty, *cp); + n_tty_receive_parity_error(tty, *cp++); break; case TTY_OVERRUN: n_tty_receive_overrun(tty); -- cgit v0.10.2 From 4a23a4df500f29603ee25995f9c1d3af79f7a994 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:22 -0400 Subject: n_tty: Factor 'real raw' receive_buf into standalone fn Convert to modal receive_buf() processing; factor real_raw receive_buf() into n_tty_receive_buf_real_raw(). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 4f20bec..f763f75 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -242,7 +242,7 @@ static void n_tty_write_wakeup(struct tty_struct *tty) kill_fasync(&tty->fasync, SIGIO, POLL_OUT); } -static inline void n_tty_check_throttle(struct tty_struct *tty) +static void n_tty_check_throttle(struct tty_struct *tty) { if (tty->driver->type == TTY_DRIVER_TYPE_PTY) return; @@ -1481,6 +1481,28 @@ handle_newline: * publishes read_head and canon_head */ +static void +n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t n, head; + + head = ldata->read_head & (N_TTY_BUF_SIZE - 1); + n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); + n = min_t(size_t, count, n); + memcpy(read_buf_addr(ldata, head), cp, n); + ldata->read_head += n; + cp += n; + count -= n; + + head = ldata->read_head & (N_TTY_BUF_SIZE - 1); + n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); + n = min_t(size_t, count, n); + memcpy(read_buf_addr(ldata, head), cp, n); + ldata->read_head += n; +} + static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { @@ -1488,23 +1510,9 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char flags = TTY_NORMAL; char buf[64]; - if (ldata->real_raw) { - size_t n, head; - - head = ldata->read_head & (N_TTY_BUF_SIZE - 1); - n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); - n = min_t(size_t, count, n); - memcpy(read_buf_addr(ldata, head), cp, n); - ldata->read_head += n; - cp += n; - count -= n; - - head = ldata->read_head & (N_TTY_BUF_SIZE - 1); - n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); - n = min_t(size_t, count, n); - memcpy(read_buf_addr(ldata, head), cp, n); - ldata->read_head += n; - } else { + if (ldata->real_raw) + n_tty_receive_buf_real_raw(tty, cp, fp, count); + else { while (count--) { if (fp) flags = *fp++; @@ -1540,8 +1548,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, if (waitqueue_active(&tty->read_wait)) wake_up_interruptible(&tty->read_wait); } - - n_tty_check_throttle(tty); } static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, @@ -1549,6 +1555,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, { down_read(&tty->termios_rwsem); __receive_buf(tty, cp, fp, count); + n_tty_check_throttle(tty); up_read(&tty->termios_rwsem); } @@ -1564,8 +1571,10 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, if (!room) ldata->no_room = 1; count = min(count, room); - if (count) + if (count) { __receive_buf(tty, cp, fp, count); + n_tty_check_throttle(tty); + } up_read(&tty->termios_rwsem); -- cgit v0.10.2 From b0ac50be1f398ae1daedcf1ce71ac6b6409c88d2 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:23 -0400 Subject: n_tty: Factor signal char handling into separate fn Reduce the monolithic n_tty_receive_char() complexity; factor the handling of INTR_CHAR, QUIT_CHAR and SUSP_CHAR into n_tty_receive_signal_char(). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index f763f75..68fc4c3 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1219,6 +1219,26 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty, wake_up_interruptible(&tty->read_wait); } +static void +n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) +{ + if (!L_NOFLSH(tty)) { + /* flushing needs exclusive termios_rwsem */ + up_read(&tty->termios_rwsem); + n_tty_flush_buffer(tty); + tty_driver_flush_buffer(tty); + down_read(&tty->termios_rwsem); + } + if (I_IXON(tty)) + start_tty(tty); + if (L_ECHO(tty)) { + echo_char(c, tty); + commit_echoes(tty); + } + isig(signal, tty); + return; +} + /** * n_tty_receive_char - perform processing * @tty: terminal device @@ -1314,30 +1334,14 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) } if (L_ISIG(tty)) { - int signal; - signal = SIGINT; - if (c == INTR_CHAR(tty)) - goto send_signal; - signal = SIGQUIT; - if (c == QUIT_CHAR(tty)) - goto send_signal; - signal = SIGTSTP; - if (c == SUSP_CHAR(tty)) { -send_signal: - if (!L_NOFLSH(tty)) { - /* flushing needs exclusive termios_rwsem */ - up_read(&tty->termios_rwsem); - n_tty_flush_buffer(tty); - tty_driver_flush_buffer(tty); - down_read(&tty->termios_rwsem); - } - if (I_IXON(tty)) - start_tty(tty); - if (L_ECHO(tty)) { - echo_char(c, tty); - commit_echoes(tty); - } - isig(signal, tty); + if (c == INTR_CHAR(tty)) { + n_tty_receive_signal_char(tty, SIGINT, c); + return; + } else if (c == QUIT_CHAR(tty)) { + n_tty_receive_signal_char(tty, SIGQUIT, c); + return; + } else if (c == SUSP_CHAR(tty)) { + n_tty_receive_signal_char(tty, SIGTSTP, c); return; } } -- cgit v0.10.2 From d2f8d7abd1e7ac04a0b42df36b53fef00d5d73aa Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:24 -0400 Subject: n_tty: Factor flagged char handling into separate fn Prepare for modal receive_buf() handling; factor handling for TTY_BREAK, TTY_PARITY, TTY_FRAME and TTY_OVERRUN into n_tty_receive_char_flagged(). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 68fc4c3..6aa9033 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1468,6 +1468,29 @@ handle_newline: put_tty_queue(c, ldata); } +static void +n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) +{ + char buf[64]; + + switch (flag) { + case TTY_BREAK: + n_tty_receive_break(tty); + break; + case TTY_PARITY: + case TTY_FRAME: + n_tty_receive_parity_error(tty, c); + break; + case TTY_OVERRUN: + n_tty_receive_overrun(tty); + break; + default: + printk(KERN_ERR "%s: unknown flag %d\n", + tty_name(tty, buf), flag); + break; + } +} + /** * n_tty_receive_buf - data receive * @tty: terminal device @@ -1511,34 +1534,19 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; - char flags = TTY_NORMAL; - char buf[64]; if (ldata->real_raw) n_tty_receive_buf_real_raw(tty, cp, fp, count); else { + char flag = TTY_NORMAL; + while (count--) { if (fp) - flags = *fp++; - switch (flags) { - case TTY_NORMAL: + flag = *fp++; + if (likely(flag == TTY_NORMAL)) n_tty_receive_char(tty, *cp++); - break; - case TTY_BREAK: - n_tty_receive_break(tty); - break; - case TTY_PARITY: - case TTY_FRAME: - n_tty_receive_parity_error(tty, *cp++); - break; - case TTY_OVERRUN: - n_tty_receive_overrun(tty); - break; - default: - printk(KERN_ERR "%s: unknown flag %d\n", - tty_name(tty, buf), flags); - break; - } + else + n_tty_receive_char_flagged(tty, *cp++, flag); } flush_echoes(tty); -- cgit v0.10.2 From 554117bdc8c245249f364ddcdbd65ae5701a5ead Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:25 -0400 Subject: n_tty: Factor raw mode receive_buf() into separate fn Convert to modal receive_buf() processing; factor raw mode per-char i/o into n_tty_receive_buf_raw(). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 6aa9033..900ebbe 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1259,11 +1259,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) struct n_tty_data *ldata = tty->disc_data; int parmrk; - if (ldata->raw) { - put_tty_queue(c, ldata); - return; - } - if (I_ISTRIP(tty)) c &= 0x7f; if (I_IUCLC(tty) && L_IEXTEN(tty)) @@ -1530,6 +1525,23 @@ n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, ldata->read_head += n; } +static void +n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) + put_tty_queue(*cp++, ldata); + else + n_tty_receive_char_flagged(tty, *cp++, flag); + } +} + static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { @@ -1537,6 +1549,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, if (ldata->real_raw) n_tty_receive_buf_real_raw(tty, cp, fp, count); + else if (ldata->raw) + n_tty_receive_buf_raw(tty, cp, fp, count); else { char flag = TTY_NORMAL; -- cgit v0.10.2 From a1dd30e9b4c38a4a177106741b03ac6a55777286 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:26 -0400 Subject: n_tty: Special case EXTPROC receive_buf() as raw mode When EXTPROC is set without ISTRIP or IUCLC, processing is identical to raw mode; handle this receiving mode as a special-case of raw mode. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 900ebbe..e9cfc77 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1546,10 +1546,11 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; + bool preops = I_ISTRIP(tty) || (I_IUCLC(tty) && L_IEXTEN(tty)); if (ldata->real_raw) n_tty_receive_buf_real_raw(tty, cp, fp, count); - else if (ldata->raw) + else if (ldata->raw || (L_EXTPROC(tty) && !preops)) n_tty_receive_buf_raw(tty, cp, fp, count); else { char flag = TTY_NORMAL; -- cgit v0.10.2 From ad0cc7bafe498fb299043582e822fc4e74388edb Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 15 Jun 2013 10:21:27 -0400 Subject: n_tty: Factor tty->closing receive_buf() into separate fn Convert to modal receive_buf() processing; factor receive char processing when tty->closing into n_tty_receive_buf_closing(). Note that EXTPROC when ISTRIP or IUCLC is set continues to be handled by n_tty_receive_char(). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index e9cfc77..ed6c4e4 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1276,17 +1276,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) process_echoes(tty); } - if (tty->closing) { - if (I_IXON(tty)) { - if (c == START_CHAR(tty)) { - start_tty(tty); - process_echoes(tty); - } else if (c == STOP_CHAR(tty)) - stop_tty(tty); - } - return; - } - /* * If the previous character was LNEXT, or we know that this * character is not one of the characters that we'll have to @@ -1463,6 +1452,27 @@ handle_newline: put_tty_queue(c, ldata); } +static inline void +n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) +{ + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + + if (I_IXON(tty)) { + if (c == STOP_CHAR(tty)) + stop_tty(tty); + else if (c == START_CHAR(tty) || + (tty->stopped && !tty->flow_stopped && I_IXANY(tty) && + c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && + c != SUSP_CHAR(tty))) { + start_tty(tty); + process_echoes(tty); + } + } +} + static void n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) { @@ -1542,6 +1552,22 @@ n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp, } } +static void +n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) + n_tty_receive_char_closing(tty, *cp++); + else + n_tty_receive_char_flagged(tty, *cp++, flag); + } +} + static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { @@ -1552,6 +1578,8 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, n_tty_receive_buf_real_raw(tty, cp, fp, count); else if (ldata->raw || (L_EXTPROC(tty) && !preops)) n_tty_receive_buf_raw(tty, cp, fp, count); + else if (tty->closing && !L_EXTPROC(tty)) + n_tty_receive_buf_closing(tty, cp, fp, count); else { char flag = TTY_NORMAL; -- cgit v0.10.2 From 86e35aea477f4cc5a724d8704f5e9d956c73d424 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 09:30:05 -0400 Subject: n_tty: Fix build breakage on ppc64 Commit 20bafb3d23d108bc0a896eb8b7c1501f4f649b77 'n_tty: Move buffers into n_tty_data' broke the ppc64 build. Include vmalloc.h for the required function declarations. Reported-by: Stephen Rothwell Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index ed6c4e4..2c120b6 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -50,6 +50,7 @@ #include #include #include +#include /* number of characters left in xmit buffer before select has we have room */ -- cgit v0.10.2 From 7d88d637a3c75257b7611f9feee0c17fa187ecc9 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:49 -0400 Subject: n_tty: Factor standard per-char i/o into separate fn Simplify __receive_buf() into a dispatch function; perform per-char processing for all other modes not already handled. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 2c120b6..951ecfe 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1569,6 +1569,22 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp, } } +static void +n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) + n_tty_receive_char(tty, *cp++); + else + n_tty_receive_char_flagged(tty, *cp++, flag); + } +} + static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { @@ -1582,16 +1598,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, else if (tty->closing && !L_EXTPROC(tty)) n_tty_receive_buf_closing(tty, cp, fp, count); else { - char flag = TTY_NORMAL; - - while (count--) { - if (fp) - flag = *fp++; - if (likely(flag == TTY_NORMAL)) - n_tty_receive_char(tty, *cp++); - else - n_tty_receive_char_flagged(tty, *cp++, flag); - } + n_tty_receive_buf_standard(tty, cp, fp, count); flush_echoes(tty); if (tty->ops->flush_chars) -- cgit v0.10.2 From 855df3c08968beac9d9a86536c43c0474684ac37 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:50 -0400 Subject: n_tty: Eliminate char tests from IXANY restart test Relocate the IXANY restart tty test to code paths where the the received char is not START_CHAR, STOP_CHAR, INTR_CHAR, QUIT_CHAR or SUSP_CHAR. Fixes the condition when ISIG if off and one of INTR_CHAR, QUIT_CHAR or SUSP_CHAR does not restart i/o. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 951ecfe..f2e6bdb 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1270,13 +1270,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) return; } - if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && - I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) && - c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) { - start_tty(tty); - process_echoes(tty); - } - /* * If the previous character was LNEXT, or we know that this * character is not one of the characters that we'll have to @@ -1285,6 +1278,13 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) */ if (!test_bit(c, ldata->char_map) || ldata->lnext) { ldata->lnext = 0; + + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && + I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); + } + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { /* beep if no space */ @@ -1331,6 +1331,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) } } + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); + } + if (c == '\r') { if (I_IGNCR(tty)) return; -- cgit v0.10.2 From 4b1f79c2d7352605b567cab49de20d3b67762ee3 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:51 -0400 Subject: n_tty: Split n_tty_receive_char() Factor 'special' per-char processing into standalone fn, n_tty_receive_char_special(), which handles processing for chars marked in the char_map. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index f2e6bdb..8686124 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1255,57 +1255,12 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) * otherwise, publishes read_head via put_tty_queue() */ -static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) +static void +n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; int parmrk; - if (I_ISTRIP(tty)) - c &= 0x7f; - if (I_IUCLC(tty) && L_IEXTEN(tty)) - c = tolower(c); - - if (L_EXTPROC(tty)) { - put_tty_queue(c, ldata); - return; - } - - /* - * If the previous character was LNEXT, or we know that this - * character is not one of the characters that we'll have to - * handle specially, do shortcut processing to speed things - * up. - */ - if (!test_bit(c, ldata->char_map) || ldata->lnext) { - ldata->lnext = 0; - - if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && - I_IXANY(tty)) { - start_tty(tty); - process_echoes(tty); - } - - parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { - /* beep if no space */ - if (L_ECHO(tty)) - process_output('\a', tty); - return; - } - if (L_ECHO(tty)) { - finish_erasing(ldata); - /* Record the column of first canon char. */ - if (ldata->canon_head == ldata->read_head) - echo_set_canon_col(ldata); - echo_char(c, tty); - commit_echoes(tty); - } - if (parmrk) - put_tty_queue(c, ldata); - put_tty_queue(c, ldata); - return; - } - if (I_IXON(tty)) { if (c == START_CHAR(tty)) { start_tty(tty); @@ -1458,6 +1413,60 @@ handle_newline: put_tty_queue(c, ldata); } +static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) +{ + struct n_tty_data *ldata = tty->disc_data; + int parmrk; + + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + + if (L_EXTPROC(tty)) { + put_tty_queue(c, ldata); + return; + } + + /* + * If the previous character was LNEXT, or we know that this + * character is not one of the characters that we'll have to + * handle specially, do shortcut processing to speed things + * up. + */ + if (!test_bit(c, ldata->char_map) || ldata->lnext) { + ldata->lnext = 0; + + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && + I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); + } + + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } + if (L_ECHO(tty)) { + finish_erasing(ldata); + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + commit_echoes(tty); + } + if (parmrk) + put_tty_queue(c, ldata); + put_tty_queue(c, ldata); + return; + } + + n_tty_receive_char_special(tty, c); +} + static inline void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) { -- cgit v0.10.2 From 6baad008678cf07820a3099bfb2bb558b5d0fa2a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:52 -0400 Subject: n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn Convert to modal receive_buf processing; factor char receive processing for unusual termios settings out of normal per-char i/o path. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 8686124..59c73ee 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1418,16 +1418,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) struct n_tty_data *ldata = tty->disc_data; int parmrk; - if (I_ISTRIP(tty)) - c &= 0x7f; - if (I_IUCLC(tty) && L_IEXTEN(tty)) - c = tolower(c); - - if (L_EXTPROC(tty)) { - put_tty_queue(c, ldata); - return; - } - /* * If the previous character was LNEXT, or we know that this * character is not one of the characters that we'll have to @@ -1585,7 +1575,34 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp, static void n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) { + unsigned char c = *cp++; + + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + if (L_EXTPROC(tty)) { + put_tty_queue(c, ldata); + continue; + } + n_tty_receive_char(tty, c); + } else + n_tty_receive_char_flagged(tty, *cp++, flag); + } +} + +static void +n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { char flag = TTY_NORMAL; @@ -1612,7 +1629,10 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, else if (tty->closing && !L_EXTPROC(tty)) n_tty_receive_buf_closing(tty, cp, fp, count); else { - n_tty_receive_buf_standard(tty, cp, fp, count); + if (!preops) + n_tty_receive_buf_fast(tty, cp, fp, count); + else + n_tty_receive_buf_standard(tty, cp, fp, count); flush_echoes(tty); if (tty->ops->flush_chars) -- cgit v0.10.2 From 7de971b05055d31589955feb0f50963b78fe697a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:53 -0400 Subject: n_tty: Factor PARMRK from normal per-char i/o Handle PARMRK processing on the slow per-char i/o path. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 59c73ee..adc06af 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1458,6 +1458,47 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) } static inline void +n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c) +{ + struct n_tty_data *ldata = tty->disc_data; + + /* + * If the previous character was LNEXT, or we know that this + * character is not one of the characters that we'll have to + * handle specially, do shortcut processing to speed things + * up. + */ + if (!test_bit(c, ldata->char_map) || ldata->lnext) { + ldata->lnext = 0; + + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && + I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); + } + + if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } + if (L_ECHO(tty)) { + finish_erasing(ldata); + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + commit_echoes(tty); + } + put_tty_queue(c, ldata); + return; + } + + n_tty_receive_char_special(tty, c); +} + +static inline void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) { if (I_ISTRIP(tty)) @@ -1610,7 +1651,7 @@ n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp, if (fp) flag = *fp++; if (likely(flag == TTY_NORMAL)) - n_tty_receive_char(tty, *cp++); + n_tty_receive_char_fast(tty, *cp++); else n_tty_receive_char_flagged(tty, *cp++, flag); } @@ -1629,7 +1670,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, else if (tty->closing && !L_EXTPROC(tty)) n_tty_receive_buf_closing(tty, cp, fp, count); else { - if (!preops) + if (!preops && !I_PARMRK(tty)) n_tty_receive_buf_fast(tty, cp, fp, count); else n_tty_receive_buf_standard(tty, cp, fp, count); -- cgit v0.10.2 From 19e2ad6a09f0c06dbca19c98e5f4584269d913dd Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:54 -0400 Subject: n_tty: Remove overflow tests from receive_buf() path Always pre-figure the space available in the read_buf and limit the inbound receive request to that amount. For compatibility reasons with the non-flow-controlled interface, n_tty_receive_buf() will continue filling read_buf until all data has been received or receive_room() returns 0. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index adc06af..f66d95f 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -316,12 +316,9 @@ static inline void n_tty_check_unthrottle(struct tty_struct *tty) * not active. */ -static void put_tty_queue(unsigned char c, struct n_tty_data *ldata) +static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata) { - if (read_cnt(ldata) < N_TTY_BUF_SIZE) { - *read_buf_addr(ldata, ldata->read_head) = c; - ldata->read_head++; - } + *read_buf_addr(ldata, ldata->read_head++) = c; } /** @@ -1333,11 +1330,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) return; } if (c == '\n') { - if (read_cnt(ldata) >= N_TTY_BUF_SIZE) { - if (L_ECHO(tty)) - process_output('\a', tty); - return; - } if (L_ECHO(tty) || L_ECHONL(tty)) { echo_char_raw('\n', ldata); commit_echoes(tty); @@ -1345,8 +1337,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) goto handle_newline; } if (c == EOF_CHAR(tty)) { - if (read_cnt(ldata) >= N_TTY_BUF_SIZE) - return; c = __DISABLED_CHAR; goto handle_newline; } @@ -1354,11 +1344,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk)) { - if (L_ECHO(tty)) - process_output('\a', tty); - return; - } /* * XXX are EOL_CHAR and EOL2_CHAR echoed?!? */ @@ -1388,12 +1373,6 @@ handle_newline: } parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { - /* beep if no space */ - if (L_ECHO(tty)) - process_output('\a', tty); - return; - } if (L_ECHO(tty)) { finish_erasing(ldata); if (c == '\n') @@ -1432,14 +1411,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) start_tty(tty); process_echoes(tty); } - - parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - parmrk - 1)) { - /* beep if no space */ - if (L_ECHO(tty)) - process_output('\a', tty); - return; - } if (L_ECHO(tty)) { finish_erasing(ldata); /* Record the column of first canon char. */ @@ -1448,6 +1419,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) echo_char(c, tty); commit_echoes(tty); } + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; if (parmrk) put_tty_queue(c, ldata); put_tty_queue(c, ldata); @@ -1476,13 +1448,6 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c) start_tty(tty); process_echoes(tty); } - - if (read_cnt(ldata) >= (N_TTY_BUF_SIZE - 1)) { - /* beep if no space */ - if (L_ECHO(tty)) - process_output('\a', tty); - return; - } if (L_ECHO(tty)) { finish_erasing(ldata); /* Record the column of first canon char. */ @@ -1691,8 +1656,23 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { + int room, n; + down_read(&tty->termios_rwsem); - __receive_buf(tty, cp, fp, count); + + while (1) { + room = receive_room(tty); + n = min(count, room); + if (!n) + break; + __receive_buf(tty, cp, fp, n); + cp += n; + if (fp) + fp += n; + count -= n; + } + + tty->receive_room = room; n_tty_check_throttle(tty); up_read(&tty->termios_rwsem); } @@ -1701,22 +1681,31 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct n_tty_data *ldata = tty->disc_data; - int room; + int room, n, rcvd = 0; down_read(&tty->termios_rwsem); - tty->receive_room = room = receive_room(tty); - if (!room) - ldata->no_room = 1; - count = min(count, room); - if (count) { - __receive_buf(tty, cp, fp, count); - n_tty_check_throttle(tty); + while (1) { + room = receive_room(tty); + n = min(count, room); + if (!n) { + if (!room) + ldata->no_room = 1; + break; + } + __receive_buf(tty, cp, fp, n); + cp += n; + if (fp) + fp += n; + count -= n; + rcvd += n; } + tty->receive_room = room; + n_tty_check_throttle(tty); up_read(&tty->termios_rwsem); - return count; + return rcvd; } int is_ignored(int sig) -- cgit v0.10.2 From 4b293492ae9ca87b4410fafae1fe2ea6eafb3c87 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:55 -0400 Subject: n_tty: Un-inline single-use functions gcc will likely inline these single-use functions anyway; remove inline modifier. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index f66d95f..7358263 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -264,7 +264,7 @@ static void n_tty_check_throttle(struct tty_struct *tty) __tty_set_flow_change(tty, 0); } -static inline void n_tty_check_unthrottle(struct tty_struct *tty) +static void n_tty_check_unthrottle(struct tty_struct *tty) { if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->link->ldisc->ops->write_wakeup == n_tty_write_wakeup) { @@ -1110,7 +1110,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) * Locking: ctrl_lock */ -static inline void isig(int sig, struct tty_struct *tty) +static void isig(int sig, struct tty_struct *tty) { struct pid *tty_pgrp = tty_get_pgrp(tty); if (tty_pgrp) { @@ -1133,7 +1133,7 @@ static inline void isig(int sig, struct tty_struct *tty) * Note: may get exclusive termios_rwsem if flushing input buffer */ -static inline void n_tty_receive_break(struct tty_struct *tty) +static void n_tty_receive_break(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; @@ -1171,7 +1171,7 @@ static inline void n_tty_receive_break(struct tty_struct *tty) * private. */ -static inline void n_tty_receive_overrun(struct tty_struct *tty) +static void n_tty_receive_overrun(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; char buf[64]; @@ -1199,8 +1199,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty) * caller holds non-exclusive termios_rwsem * publishes read_head via put_tty_queue() */ -static inline void n_tty_receive_parity_error(struct tty_struct *tty, - unsigned char c) +static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; -- cgit v0.10.2 From e60d27c4d8b33ba20896b76b6558f061bc6460ff Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:56 -0400 Subject: n_tty: Factor LNEXT processing from per-char i/o path LNEXT processing accounts for ~15% of total cpu time in end-to-end tty i/o; factor the lnext test/clear from the per-char i/o path. Instead, attempt to immediately handle the literal next char if not at the end of this received buffer; otherwise, handle the first char of the next received buffer as the literal next char, then continue with normal i/o. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 7358263..dd8ae0c 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1249,9 +1249,11 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) * caller holds non-exclusive termios_rwsem * publishes canon_head if canonical mode is active * otherwise, publishes read_head via put_tty_queue() + * + * Returns 1 if LNEXT was received, else returns 0 */ -static void +static int n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; @@ -1261,24 +1263,24 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) if (c == START_CHAR(tty)) { start_tty(tty); commit_echoes(tty); - return; + return 0; } if (c == STOP_CHAR(tty)) { stop_tty(tty); - return; + return 0; } } if (L_ISIG(tty)) { if (c == INTR_CHAR(tty)) { n_tty_receive_signal_char(tty, SIGINT, c); - return; + return 0; } else if (c == QUIT_CHAR(tty)) { n_tty_receive_signal_char(tty, SIGQUIT, c); - return; + return 0; } else if (c == SUSP_CHAR(tty)) { n_tty_receive_signal_char(tty, SIGTSTP, c); - return; + return 0; } } @@ -1289,7 +1291,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) if (c == '\r') { if (I_IGNCR(tty)) - return; + return 0; if (I_ICRNL(tty)) c = '\n'; } else if (c == '\n' && I_INLCR(tty)) @@ -1300,7 +1302,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { eraser(c, tty); commit_echoes(tty); - return; + return 0; } if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { ldata->lnext = 1; @@ -1312,10 +1314,9 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) commit_echoes(tty); } } - return; + return 1; } - if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && - L_IEXTEN(tty)) { + if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) { size_t tail = ldata->canon_head; finish_erasing(ldata); @@ -1326,7 +1327,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) tail++; } commit_echoes(tty); - return; + return 0; } if (c == '\n') { if (L_ECHO(tty) || L_ECHONL(tty)) { @@ -1367,7 +1368,7 @@ handle_newline: kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) wake_up_interruptible(&tty->read_wait); - return; + return 0; } } @@ -1389,43 +1390,36 @@ handle_newline: put_tty_queue(c, ldata); put_tty_queue(c, ldata); + return 0; } -static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) +static inline void +n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; int parmrk; - /* - * If the previous character was LNEXT, or we know that this - * character is not one of the characters that we'll have to - * handle specially, do shortcut processing to speed things - * up. - */ - if (!test_bit(c, ldata->char_map) || ldata->lnext) { - ldata->lnext = 0; - - if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && - I_IXANY(tty)) { - start_tty(tty); - process_echoes(tty); - } - if (L_ECHO(tty)) { - finish_erasing(ldata); - /* Record the column of first canon char. */ - if (ldata->canon_head == ldata->read_head) - echo_set_canon_col(ldata); - echo_char(c, tty); - commit_echoes(tty); - } - parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (parmrk) - put_tty_queue(c, ldata); - put_tty_queue(c, ldata); - return; + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); } + if (L_ECHO(tty)) { + finish_erasing(ldata); + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + commit_echoes(tty); + } + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (parmrk) + put_tty_queue(c, ldata); + put_tty_queue(c, ldata); +} - n_tty_receive_char_special(tty, c); +static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) +{ + n_tty_receive_char_inline(tty, c); } static inline void @@ -1433,33 +1427,19 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; - /* - * If the previous character was LNEXT, or we know that this - * character is not one of the characters that we'll have to - * handle specially, do shortcut processing to speed things - * up. - */ - if (!test_bit(c, ldata->char_map) || ldata->lnext) { - ldata->lnext = 0; - - if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && - I_IXANY(tty)) { - start_tty(tty); - process_echoes(tty); - } - if (L_ECHO(tty)) { - finish_erasing(ldata); - /* Record the column of first canon char. */ - if (ldata->canon_head == ldata->read_head) - echo_set_canon_col(ldata); - echo_char(c, tty); - commit_echoes(tty); - } - put_tty_queue(c, ldata); - return; + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); } - - n_tty_receive_char_special(tty, c); + if (L_ECHO(tty)) { + finish_erasing(ldata); + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + commit_echoes(tty); + } + put_tty_queue(c, ldata); } static inline void @@ -1506,6 +1486,22 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) } } +static void +n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag) +{ + struct n_tty_data *ldata = tty->disc_data; + + ldata->lnext = 0; + if (likely(flag == TTY_NORMAL)) { + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + n_tty_receive_char(tty, c); + } else + n_tty_receive_char_flagged(tty, c, flag); +} + /** * n_tty_receive_buf - data receive * @tty: terminal device @@ -1599,7 +1595,14 @@ n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp, put_tty_queue(c, ldata); continue; } - n_tty_receive_char(tty, c); + if (!test_bit(c, ldata->char_map)) + n_tty_receive_char_inline(tty, c); + else if (n_tty_receive_char_special(tty, c) && count) { + if (fp) + flag = *fp++; + n_tty_receive_char_lnext(tty, *cp++, flag); + count--; + } } else n_tty_receive_char_flagged(tty, *cp++, flag); } @@ -1609,14 +1612,24 @@ static void n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { + struct n_tty_data *ldata = tty->disc_data; char flag = TTY_NORMAL; while (count--) { if (fp) flag = *fp++; - if (likely(flag == TTY_NORMAL)) - n_tty_receive_char_fast(tty, *cp++); - else + if (likely(flag == TTY_NORMAL)) { + unsigned char c = *cp++; + + if (!test_bit(c, ldata->char_map)) + n_tty_receive_char_fast(tty, c); + else if (n_tty_receive_char_special(tty, c) && count) { + if (fp) + flag = *fp++; + n_tty_receive_char_lnext(tty, *cp++, flag); + count--; + } + } else n_tty_receive_char_flagged(tty, *cp++, flag); } } @@ -1634,6 +1647,15 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, else if (tty->closing && !L_EXTPROC(tty)) n_tty_receive_buf_closing(tty, cp, fp, count); else { + if (ldata->lnext) { + char flag = TTY_NORMAL; + + if (fp) + flag = *fp++; + n_tty_receive_char_lnext(tty, *cp++, flag); + count--; + } + if (!preops && !I_PARMRK(tty)) n_tty_receive_buf_fast(tty, cp, fp, count); else -- cgit v0.10.2 From 5ede52538ee2b2202d9dff5b06c33bfde421e6e4 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 08:29:57 -0400 Subject: tty: Remove extra wakeup from pty write() path Acquiring the write_wait queue spin lock now accounts for the largest slice of cpu time on the tty write path. Two factors contribute to this situation; a overly-pessimistic line discipline write loop which _always_ sets up a wait loop even if i/o will immediately succeed, and on ptys, a wakeup storm from reads and writes. Writer wakeup does not need to be performed by the pty driver. Firstly, since the actual i/o is performed within the write, the line discipline write loop will continue while space remains in the flip buffers. Secondly, when space becomes avail in the line discipline receive buffer (and thus also in the flip buffers), the pty unthrottle re-wakes the writer (non-flow-controlled line disciplines unconditionally unthrottle the driver when data is received). Thus, existing in-kernel i/o is guaranteed to advance. Finally, writer wakeup occurs at the conclusion of the line discipline write (in tty_write_unlock()). This guarantees that any user-space write waiters are woken to continue additional i/o. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index b38a28b..b940127 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -121,10 +121,8 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c) /* Stuff the data into the input queue of the other end */ c = tty_insert_flip_string(to->port, buf, c); /* And shovel */ - if (c) { + if (c) tty_flip_buffer_push(to->port); - tty_wakeup(tty); - } } return c; } -- cgit v0.10.2 From dee4a0be69c0e2996188e0c46478eadc280a8954 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 24 Jul 2013 16:43:51 -0400 Subject: tty: Fix lock order in tty_do_resize() Commits 6a1c0680cf3ba94356ecd58833e1540c93472a57 and 9356b535fcb71db494fc434acceb79f56d15bda2, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [] lock_acquire+0x92/0x1f0 [] down_read+0x47/0x5c [] __blocking_notifier_call_chain+0x56/0xc0 [] blocking_notifier_call_chain+0x16/0x20 [] fb_notifier_call_chain+0x1b/0x20 [] register_framebuffer+0x1e2/0x320 [] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [] nouveau_fbcon_init+0x105/0x140 [nouveau] [] nouveau_drm_load+0x43f/0x610 [nouveau] [] drm_get_pci_dev+0x17e/0x2a0 [drm] [] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [] local_pci_probe+0x4b/0x80 [] pci_device_probe+0x111/0x120 [] driver_probe_device+0x8b/0x3a0 [] __driver_attach+0xab/0xb0 [] bus_for_each_dev+0x5d/0xa0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x111/0x290 [] driver_register+0x77/0x170 [] __pci_register_driver+0x64/0x70 [] drm_pci_init+0x11a/0x130 [drm] [] nouveau_drm_init+0x4d/0x1000 [nouveau] [] do_one_initcall+0xea/0x1a0 [] load_module+0x123b/0x1bf0 [] SyS_init_module+0xd7/0x120 [] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [] lock_acquire+0x92/0x1f0 [] console_lock+0x77/0x80 [] con_flush_chars+0x31/0x50 [] n_tty_write+0x1ec/0x4d0 [] tty_write+0x159/0x2e0 [] redirected_tty_write+0xb5/0xc0 [] vfs_write+0xc5/0x1f0 [] SyS_write+0x55/0xa0 [] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [] __lock_acquire+0x1c43/0x1d30 [] lock_acquire+0x92/0x1f0 [] down_write+0x44/0x70 [] tty_do_resize+0x36/0xe0 [] vc_do_resize+0x3e1/0x4c0 [] vc_resize+0x1f/0x30 [] fbcon_init+0x385/0x5a0 [] visual_init+0xbc/0x120 [] do_bind_con_driver+0x163/0x320 [] do_take_over_console+0x61/0x70 [] do_fbcon_takeover+0x63/0xc0 [] fbcon_event_notify+0x715/0x820 [] notifier_call_chain+0x5d/0x110 [] __blocking_notifier_call_chain+0x6c/0xc0 [] blocking_notifier_call_chain+0x16/0x20 [] fb_notifier_call_chain+0x1b/0x20 [] register_framebuffer+0x1e2/0x320 [] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [] nouveau_fbcon_init+0x105/0x140 [nouveau] [] nouveau_drm_load+0x43f/0x610 [nouveau] [] drm_get_pci_dev+0x17e/0x2a0 [drm] [] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [] local_pci_probe+0x4b/0x80 [] pci_device_probe+0x111/0x120 [] driver_probe_device+0x8b/0x3a0 [] __driver_attach+0xab/0xb0 [] bus_for_each_dev+0x5d/0xa0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x111/0x290 [] driver_register+0x77/0x170 [] __pci_register_driver+0x64/0x70 [] drm_pci_init+0x11a/0x130 [drm] [] nouveau_drm_init+0x4d/0x1000 [nouveau] [] do_one_initcall+0xea/0x1a0 [] load_module+0x123b/0x1bf0 [] SyS_init_module+0xd7/0x120 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [] dump_stack+0x19/0x1b [] print_circular_bug+0x1fb/0x20c [] __lock_acquire+0x1c43/0x1d30 [] ? mark_held_locks+0xae/0x120 [] ? trace_hardirqs_on_caller+0x105/0x1d0 [] lock_acquire+0x92/0x1f0 [] ? tty_do_resize+0x36/0xe0 [] down_write+0x44/0x70 [] ? tty_do_resize+0x36/0xe0 [] tty_do_resize+0x36/0xe0 [] vc_do_resize+0x3e1/0x4c0 [] vc_resize+0x1f/0x30 [] fbcon_init+0x385/0x5a0 [] visual_init+0xbc/0x120 [] do_bind_con_driver+0x163/0x320 [] do_take_over_console+0x61/0x70 [] do_fbcon_takeover+0x63/0xc0 [] fbcon_event_notify+0x715/0x820 [] notifier_call_chain+0x5d/0x110 [] __blocking_notifier_call_chain+0x6c/0xc0 [] blocking_notifier_call_chain+0x16/0x20 [] fb_notifier_call_chain+0x1b/0x20 [] register_framebuffer+0x1e2/0x320 [] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [] ? kmemleak_alloc+0x5b/0xc0 [] ? kmem_cache_alloc_trace+0x104/0x290 [] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [] nouveau_fbcon_init+0x105/0x140 [nouveau] [] nouveau_drm_load+0x43f/0x610 [nouveau] [] drm_get_pci_dev+0x17e/0x2a0 [drm] [] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [] ? _raw_spin_unlock_irqrestore+0x42/0x80 [] local_pci_probe+0x4b/0x80 [] pci_device_probe+0x111/0x120 [] driver_probe_device+0x8b/0x3a0 [] __driver_attach+0xab/0xb0 [] ? driver_probe_device+0x3a0/0x3a0 [] bus_for_each_dev+0x5d/0xa0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x111/0x290 [] ? 0xffffffffa0229fff [] driver_register+0x77/0x170 [] ? 0xffffffffa0229fff [] __pci_register_driver+0x64/0x70 [] drm_pci_init+0x11a/0x130 [drm] [] ? 0xffffffffa0229fff [] ? 0xffffffffa0229fff [] nouveau_drm_init+0x4d/0x1000 [nouveau] [] do_one_initcall+0xea/0x1a0 [] load_module+0x123b/0x1bf0 [] ? ddebug_proc_open+0xb0/0xb0 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] SyS_init_module+0xd7/0x120 [] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index b940127..25c9bc7 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -281,7 +281,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws) struct tty_struct *pty = tty->link; /* For a PTY we need to lock the tty side */ - down_write(&tty->termios_rwsem); + mutex_lock(&tty->winsize_mutex); if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; @@ -308,7 +308,7 @@ static int pty_resize(struct tty_struct *tty, struct winsize *ws) tty->winsize = *ws; pty->winsize = *ws; /* Never used so will go away soon */ done: - up_write(&tty->termios_rwsem); + mutex_unlock(&tty->winsize_mutex); return 0; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 2174698..26bb78c 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2229,7 +2229,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p) * * Copies the kernel idea of the window size into the user buffer. * - * Locking: tty->termios_rwsem is taken to ensure the winsize data + * Locking: tty->winsize_mutex is taken to ensure the winsize data * is consistent. */ @@ -2237,9 +2237,9 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) { int err; - down_read(&tty->termios_rwsem); + mutex_lock(&tty->winsize_mutex); err = copy_to_user(arg, &tty->winsize, sizeof(*arg)); - up_read(&tty->termios_rwsem); + mutex_unlock(&tty->winsize_mutex); return err ? -EFAULT: 0; } @@ -2260,7 +2260,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws) unsigned long flags; /* Lock the tty */ - down_write(&tty->termios_rwsem); + mutex_lock(&tty->winsize_mutex); if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; /* Get the PID values and reference them so we can @@ -2275,7 +2275,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws) tty->winsize = *ws; done: - up_write(&tty->termios_rwsem); + mutex_unlock(&tty->winsize_mutex); return 0; } EXPORT_SYMBOL(tty_do_resize); @@ -3016,6 +3016,7 @@ void initialize_tty_struct(struct tty_struct *tty, mutex_init(&tty->legacy_mutex); mutex_init(&tty->throttle_mutex); init_rwsem(&tty->termios_rwsem); + mutex_init(&tty->winsize_mutex); init_ldsem(&tty->ldisc_sem); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); diff --git a/include/linux/tty.h b/include/linux/tty.h index 554b732..64f8646 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -245,6 +245,7 @@ struct tty_struct { struct mutex legacy_mutex; struct mutex throttle_mutex; struct rw_semaphore termios_rwsem; + struct mutex winsize_mutex; spinlock_t ctrl_lock; /* Termios values are protected by the termios rwsem */ struct ktermios termios, termios_locked; @@ -254,7 +255,7 @@ struct tty_struct { struct pid *session; unsigned long flags; int count; - struct winsize winsize; /* termios rwsem */ + struct winsize winsize; /* winsize_mutex */ unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1; unsigned char ctrl_status; /* ctrl_lock */ unsigned int receive_room; /* Bytes free for queue */ -- cgit v0.10.2 From f3c909b42902034dd1e54abdc770c6284fe3fb7e Mon Sep 17 00:00:00 2001 From: Aldo Iljazi Date: Mon, 8 Jul 2013 22:28:00 +0300 Subject: Drivers: tty: n_gsm.c: fixed 7 errors & 6 warnings that checkpatch complained Specifically: n_gsm.c:810: ERROR: space required before the open parenthesis '(' n_gsm.c:830: WARNING: line over 80 characters n_gsm.c:971: ERROR: trailing whitespace n_gsm.c:984: ERROR: code indent should use tabs where possible n_gsm.c:984: WARNING: please, no space before tabs n_gsm.c:984: WARNING: please, no spaces at the start of a line n_gsm.c:1141: WARNING: space prohibited before semicolon n_gsm.c:1743: ERROR: space required before the open brace '{' n_gsm.c:1744: WARNING: line over 80 characters n_gsm.c:1745: ERROR: code indent should use tabs where possible n_gsm.c:1746: ERROR: code indent should use tabs where possible n_gsm.c:2908: WARNING: line over 80 characters n_gsm.c:2912: ERROR: trailing whitespace Signed-off-by: Aldo Iljazi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 6422390..c0f76da 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -807,7 +807,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) int h = dlci->adaption - 1; total_size = 0; - while(1) { + while (1) { len = kfifo_len(dlci->fifo); if (len == 0) return total_size; @@ -827,8 +827,8 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) switch (dlci->adaption) { case 1: /* Unstructured */ break; - case 2: /* Unstructed with modem bits. Always one byte as we never - send inline break data */ + case 2: /* Unstructed with modem bits. + Always one byte as we never send inline break data */ *dp++ = gsm_encode_modem(dlci); break; } @@ -968,7 +968,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci) unsigned long flags; int sweep; - if (dlci->constipated) + if (dlci->constipated) return; spin_lock_irqsave(&dlci->gsm->tx_lock, flags); @@ -981,7 +981,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci) gsm_dlci_data_output(dlci->gsm, dlci); } if (sweep) - gsm_dlci_data_sweep(dlci->gsm); + gsm_dlci_data_sweep(dlci->gsm); spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); } @@ -1138,7 +1138,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen) { struct tty_port *port; - unsigned int addr = 0 ; + unsigned int addr = 0; u8 bits; int len = clen; u8 *dp = data; @@ -1740,10 +1740,11 @@ static void gsm_queue(struct gsm_mux *gsm) if ((gsm->control & ~PF) == UI) gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len); - if (gsm->encoding == 0){ - /* WARNING: gsm->received_fcs is used for gsm->encoding = 0 only. - In this case it contain the last piece of data - required to generate final CRC */ + if (gsm->encoding == 0) { + /* WARNING: gsm->received_fcs is used for + gsm->encoding = 0 only. + In this case it contain the last piece of data + required to generate final CRC */ gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs); } if (gsm->fcs != GOOD_FCS) { @@ -2904,9 +2905,11 @@ static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty) gsm = gsm_mux[mux]; if (gsm->dead) return -EL2HLT; - /* If DLCI 0 is not yet fully open return an error. This is ok from a locking - perspective as we don't have to worry about this if DLCI0 is lost */ - if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) + /* If DLCI 0 is not yet fully open return an error. + This is ok from a locking + perspective as we don't have to worry about this + if DLCI0 is lost */ + if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) return -EL2NSYNC; dlci = gsm->dlci[line]; if (dlci == NULL) { -- cgit v0.10.2 From e84f54fc58ada30f67b7353f6c16c3c4aa7c8da5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 10 Jul 2013 16:57:46 +0100 Subject: drivers/tty/serial: don't use devm_pinctrl_get_select_default() in probe Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij (personally at LCE13) Signed-off-by: Wolfram Sang Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 691265f..0e39fac 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include @@ -1775,7 +1774,6 @@ static int atmel_serial_probe(struct platform_device *pdev) struct atmel_uart_data *pdata = pdev->dev.platform_data; void *data; int ret = -ENODEV; - struct pinctrl *pinctrl; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); @@ -1809,12 +1807,6 @@ static int atmel_serial_probe(struct platform_device *pdev) if (ret) goto err; - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); - goto err; - } - if (!atmel_use_dma_rx(&port->uart)) { ret = -ENOMEM; data = kmalloc(sizeof(struct atmel_uart_char) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 415cec6..2797e55 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -47,7 +47,6 @@ #include #include #include -#include #include #include @@ -1507,7 +1506,6 @@ static int serial_imx_probe(struct platform_device *pdev) void __iomem *base; int ret = 0; struct resource *res; - struct pinctrl *pinctrl; sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); if (!sport) @@ -1543,13 +1541,6 @@ static int serial_imx_probe(struct platform_device *pdev) sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); - dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret); - return ret; - } - sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(sport->clk_ipg)) { ret = PTR_ERR(sport->clk_ipg); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 4f5f161..a63a20e 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -1015,7 +1014,6 @@ static int mxs_auart_probe(struct platform_device *pdev) u32 version; int ret = 0; struct resource *r; - struct pinctrl *pinctrl; s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL); if (!s) { @@ -1029,12 +1027,6 @@ static int mxs_auart_probe(struct platform_device *pdev) else if (ret < 0) goto out_free; - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); - goto out_free; - } - if (of_id) { pdev->id_entry = of_id->data; s->devtype = pdev->id_entry->driver_data; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index b6d1728..eacb0de 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #define OMAP_MAX_HSUART_PORTS 6 @@ -160,7 +159,6 @@ struct uart_omap_port { u32 latency; u32 calc_latency; struct work_struct qos_work; - struct pinctrl *pins; bool is_suspending; }; @@ -1468,13 +1466,6 @@ static int serial_omap_probe(struct platform_device *pdev) goto err_port_line; } - up->pins = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(up->pins)) { - dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n", - up->port.line, PTR_ERR(up->pins)); - up->pins = NULL; - } - sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = devm_ioremap(&pdev->dev, mem->start, -- cgit v0.10.2 From 33e745a192c272130b02b86d5dea5b577a291ed7 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 2 Jul 2013 17:07:14 +0200 Subject: tty/hvc_console: Add DTR/RTS callback to handle HUPCL control Introduce a new callback to explicitly handle the HUPCL termios control flag. This prepares for a follow-up commit for the hvc_iucv device driver to improve handling when to drop an established network connection. The callback naming is based on the recently added tty_port interface to facilitate a potential refactoring of the hvc_console to use tty_port functions. Signed-off-by: Hendrik Brueckner Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index eb255e8..9eba119 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -361,7 +361,12 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) tty->driver_data = NULL; tty_port_put(&hp->port); printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc); - } + } else + /* We are ready... raise DTR/RTS */ + if (C_BAUD(tty)) + if (hp->ops->dtr_rts) + hp->ops->dtr_rts(hp, 1); + /* Force wakeup of the polling thread */ hvc_kick(); @@ -393,6 +398,10 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) /* We are done with the tty pointer now. */ tty_port_tty_set(&hp->port, NULL); + if (C_HUPCL(tty)) + if (hp->ops->dtr_rts) + hp->ops->dtr_rts(hp, 0); + if (hp->ops->notifier_del) hp->ops->notifier_del(hp, hp->data); diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h index 674d23c..9131019 100644 --- a/drivers/tty/hvc/hvc_console.h +++ b/drivers/tty/hvc/hvc_console.h @@ -75,6 +75,9 @@ struct hv_ops { /* tiocmget/set implementation */ int (*tiocmget)(struct hvc_struct *hp); int (*tiocmset)(struct hvc_struct *hp, unsigned int set, unsigned int clear); + + /* Callbacks to handle tty ports */ + void (*dtr_rts)(struct hvc_struct *hp, int raise); }; /* Register a vterm and a slot index for use as a console (console_init) */ -- cgit v0.10.2 From 74b3b4cd80f43b094b5cb78e73bf612383d80749 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 2 Jul 2013 17:07:15 +0200 Subject: tty/hvc_iucv: Disconnect IUCV connection when lowering DTR Implement the dtr_rts() hvc console callback to improve control when to disconnect the IUCV connection. Previously, the IUCV connection was disconnected during the notifier_del() callback, i.e., when the last file descriptor to the hvc terminal device was closed. Recent changes in login programs caused undesired disconnects during the login phase. To prevent these kind of disconnects, implement the dtr_rts callback to implicitly handle the HUPCL termios control via the hvc_console driver. Signed-off-by: Hendrik Brueckner Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c index 9d47f50..fd17a9b 100644 --- a/drivers/tty/hvc/hvc_iucv.c +++ b/drivers/tty/hvc/hvc_iucv.c @@ -656,21 +656,64 @@ static void hvc_iucv_notifier_hangup(struct hvc_struct *hp, int id) } /** + * hvc_iucv_dtr_rts() - HVC notifier for handling DTR/RTS + * @hp: Pointer the HVC device (struct hvc_struct) + * @raise: Non-zero to raise or zero to lower DTR/RTS lines + * + * This routine notifies the HVC back-end to raise or lower DTR/RTS + * lines. Raising DTR/RTS is ignored. Lowering DTR/RTS indicates to + * drop the IUCV connection (similar to hang up the modem). + */ +static void hvc_iucv_dtr_rts(struct hvc_struct *hp, int raise) +{ + struct hvc_iucv_private *priv; + struct iucv_path *path; + + /* Raising the DTR/RTS is ignored as IUCV connections can be + * established at any times. + */ + if (raise) + return; + + priv = hvc_iucv_get_private(hp->vtermno); + if (!priv) + return; + + /* Lowering the DTR/RTS lines disconnects an established IUCV + * connection. + */ + flush_sndbuf_sync(priv); + + spin_lock_bh(&priv->lock); + path = priv->path; /* save reference to IUCV path */ + priv->path = NULL; + priv->iucv_state = IUCV_DISCONN; + spin_unlock_bh(&priv->lock); + + /* Sever IUCV path outside of priv->lock due to lock ordering of: + * priv->lock <--> iucv_table_lock */ + if (path) { + iucv_path_sever(path, NULL); + iucv_path_free(path); + } +} + +/** * hvc_iucv_notifier_del() - HVC notifier for closing a TTY for the last time. * @hp: Pointer to the HVC device (struct hvc_struct) * @id: Additional data (originally passed to hvc_alloc): * the index of an struct hvc_iucv_private instance. * * This routine notifies the HVC back-end that the last tty device fd has been - * closed. The function calls hvc_iucv_cleanup() to clean up the struct - * hvc_iucv_private instance. + * closed. The function cleans up tty resources. The clean-up of the IUCV + * connection is done in hvc_iucv_dtr_rts() and depends on the HUPCL termios + * control setting. * * Locking: struct hvc_iucv_private->lock */ static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id) { struct hvc_iucv_private *priv; - struct iucv_path *path; priv = hvc_iucv_get_private(id); if (!priv) @@ -679,17 +722,11 @@ static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id) flush_sndbuf_sync(priv); spin_lock_bh(&priv->lock); - path = priv->path; /* save reference to IUCV path */ - priv->path = NULL; - hvc_iucv_cleanup(priv); + destroy_tty_buffer_list(&priv->tty_outqueue); + destroy_tty_buffer_list(&priv->tty_inqueue); + priv->tty_state = TTY_CLOSED; + priv->sndbuf_len = 0; spin_unlock_bh(&priv->lock); - - /* sever IUCV path outside of priv->lock due to lock ordering of: - * priv->lock <--> iucv_table_lock */ - if (path) { - iucv_path_sever(path, NULL); - iucv_path_free(path); - } } /** @@ -931,6 +968,7 @@ static const struct hv_ops hvc_iucv_ops = { .notifier_add = hvc_iucv_notifier_add, .notifier_del = hvc_iucv_notifier_del, .notifier_hangup = hvc_iucv_notifier_hangup, + .dtr_rts = hvc_iucv_dtr_rts, }; /* Suspend / resume device operations */ -- cgit v0.10.2 From 43b829b3c1aa8d4f748a8e68724df476d242365a Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 25 Jun 2013 10:08:49 +0900 Subject: serial: remove unnecessary platform_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Acked-by: Barry Song Acked-by: Tony Prisk Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 27f20c5..9824dfb 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -703,7 +703,6 @@ static int ar933x_uart_remove(struct platform_device *pdev) struct ar933x_uart_port *up; up = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); if (up) { uart_remove_one_port(&ar933x_uart_driver, &up->port); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 0e39fac..5c17f8d 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1860,7 +1860,6 @@ static int atmel_serial_remove(struct platform_device *pdev) int ret = 0; device_init_wakeup(&pdev->dev, 0); - platform_set_drvdata(pdev, NULL); ret = uart_remove_one_port(&atmel_uart, port); diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 6fa2ae7..d14ba5a 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -852,7 +852,6 @@ static int bcm_uart_remove(struct platform_device *pdev) port = platform_get_drvdata(pdev); uart_remove_one_port(&bcm_uart_driver, port); - platform_set_drvdata(pdev, NULL); /* mark port as free */ ports[pdev->id].membase = 0; return 0; diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index bfb1796..7e4e408 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -438,8 +438,7 @@ static int uart_clps711x_probe(struct platform_device *pdev) s->uart_clk = devm_clk_get(&pdev->dev, "uart"); if (IS_ERR(s->uart_clk)) { dev_err(&pdev->dev, "Can't get UART clocks\n"); - ret = PTR_ERR(s->uart_clk); - goto err_out; + return PTR_ERR(s->uart_clk); } s->uart.owner = THIS_MODULE; @@ -461,7 +460,7 @@ static int uart_clps711x_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "Registering UART driver failed\n"); devm_clk_put(&pdev->dev, s->uart_clk); - goto err_out; + return ret; } for (i = 0; i < UART_CLPS711X_NR; i++) { @@ -478,11 +477,6 @@ static int uart_clps711x_probe(struct platform_device *pdev) } return 0; - -err_out: - platform_set_drvdata(pdev, NULL); - - return ret; } static int uart_clps711x_remove(struct platform_device *pdev) @@ -495,7 +489,6 @@ static int uart_clps711x_remove(struct platform_device *pdev) devm_clk_put(&pdev->dev, s->uart_clk); uart_unregister_driver(&s->uart); - platform_set_drvdata(pdev, NULL); return 0; } diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index 7d199c8..e029907 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -778,8 +778,6 @@ static int efm32_uart_remove(struct platform_device *pdev) { struct efm32_uart_port *efm_port = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - uart_remove_one_port(&efm32_uart_reg, &efm_port->port); if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports)) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 2797e55..40ca759 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1596,8 +1596,6 @@ static int serial_imx_remove(struct platform_device *pdev) pdata = pdev->dev.platform_data; - platform_set_drvdata(pdev, NULL); - uart_remove_one_port(&imx_reg, &sport->port); if (pdata && pdata->exit) diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c index b9a40ed..ce04f3f 100644 --- a/drivers/tty/serial/netx-serial.c +++ b/drivers/tty/serial/netx-serial.c @@ -693,8 +693,6 @@ static int serial_netx_remove(struct platform_device *pdev) { struct netx_port *sport = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - if (sport) uart_remove_one_port(&netx_reg, &sport->port); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index b1785f5..f87f1a0 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1798,7 +1798,6 @@ static int __exit pmz_detach(struct platform_device *pdev) uart_remove_one_port(&pmz_uart_reg, &uap->port); - platform_set_drvdata(pdev, NULL); uap->port.dev = NULL; return 0; diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c index 7e277a5..b6b7aca 100644 --- a/drivers/tty/serial/pnx8xxx_uart.c +++ b/drivers/tty/serial/pnx8xxx_uart.c @@ -801,8 +801,6 @@ static int pnx8xxx_serial_remove(struct platform_device *pdev) { struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - if (sport) uart_remove_one_port(&pnx8xxx_reg, &sport->port); diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 05f504e..ac8b2f5 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -945,8 +945,6 @@ static int serial_pxa_remove(struct platform_device *dev) { struct uart_pxa_port *sport = platform_get_drvdata(dev); - platform_set_drvdata(dev, NULL); - uart_remove_one_port(&serial_pxa_reg, &sport->port); clk_unprepare(sport->clk); diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index af6b3e3..fc23ea19 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -864,8 +864,6 @@ static int sa1100_serial_remove(struct platform_device *pdev) { struct sa1100_port *sport = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - if (sport) uart_remove_one_port(&sa1100_reg, &sport->port); diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index c773041..9855517 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -997,8 +997,6 @@ static int sccnxp_probe(struct platform_device *pdev) } err_out: - platform_set_drvdata(pdev, NULL); - return ret; } @@ -1016,7 +1014,6 @@ static int sccnxp_remove(struct platform_device *pdev) uart_remove_one_port(&s->uart, &s->port[i]); uart_unregister_driver(&s->uart); - platform_set_drvdata(pdev, NULL); if (!IS_ERR(s->regulator)) return regulator_disable(s->regulator); diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 1fd564b..67a0d1b 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -717,7 +717,6 @@ port_err: clk_disable_unprepare(sirfport->clk); clk_put(sirfport->clk); clk_err: - platform_set_drvdata(pdev, NULL); if (sirfport->hw_flow_ctrl) pinctrl_put(sirfport->p); err: @@ -728,7 +727,7 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) { struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); struct uart_port *port = &sirfport->port; - platform_set_drvdata(pdev, NULL); + if (sirfport->hw_flow_ctrl) pinctrl_put(sirfport->p); clk_disable_unprepare(sirfport->clk); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 48af43d..a90bf04 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -630,7 +630,6 @@ static int vt8500_serial_remove(struct platform_device *pdev) { struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); clk_disable_unprepare(vt8500_port->clk); uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart); -- cgit v0.10.2 From 1cf93e0d5488e27270ece49e8c293d546140d144 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 28 Jun 2013 13:39:42 +0800 Subject: serial: imx: remove the uart_console() check The uart_console() check makes the clocks(clk_per and clk_ipg) opened even when we close the console uart. This patch enable/disable the clocks in imx_console_write(), so we can keep the clocks closed when the console uart is closed. Also remove the clock enable/disable oprations in the probe, we do not need them any more. Signed-off-by: Huang Shijie Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 40ca759..e43064b 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -701,15 +701,13 @@ static int imx_startup(struct uart_port *port) int retval; unsigned long flags, temp; - if (!uart_console(port)) { - retval = clk_prepare_enable(sport->clk_per); - if (retval) - goto error_out1; - retval = clk_prepare_enable(sport->clk_ipg); - if (retval) { - clk_disable_unprepare(sport->clk_per); - goto error_out1; - } + retval = clk_prepare_enable(sport->clk_per); + if (retval) + goto error_out1; + retval = clk_prepare_enable(sport->clk_ipg); + if (retval) { + clk_disable_unprepare(sport->clk_per); + goto error_out1; } imx_setup_ufcr(sport, 0); @@ -900,10 +898,8 @@ static void imx_shutdown(struct uart_port *port) writel(temp, sport->port.membase + UCR1); spin_unlock_irqrestore(&sport->port.lock, flags); - if (!uart_console(&sport->port)) { - clk_disable_unprepare(sport->clk_per); - clk_disable_unprepare(sport->clk_ipg); - } + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); } static void @@ -1250,6 +1246,16 @@ imx_console_write(struct console *co, const char *s, unsigned int count) unsigned int ucr1; unsigned long flags = 0; int locked = 1; + int retval; + + retval = clk_enable(sport->clk_per); + if (retval) + return; + retval = clk_enable(sport->clk_ipg); + if (retval) { + clk_disable(sport->clk_per); + return; + } if (sport->port.sysrq) locked = 0; @@ -1285,6 +1291,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count) if (locked) spin_unlock_irqrestore(&sport->port.lock, flags); + + clk_disable(sport->clk_ipg); + clk_disable(sport->clk_per); } /* @@ -1358,6 +1367,7 @@ imx_console_setup(struct console *co, char *options) int bits = 8; int parity = 'n'; int flow = 'n'; + int retval; /* * Check whether an invalid uart number has been specified, and @@ -1370,6 +1380,11 @@ imx_console_setup(struct console *co, char *options) if (sport == NULL) return -ENODEV; + /* For setting the registers, we only need to enable the ipg clock. */ + retval = clk_prepare_enable(sport->clk_ipg); + if (retval) + goto error_console; + if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else @@ -1377,7 +1392,20 @@ imx_console_setup(struct console *co, char *options) imx_setup_ufcr(sport, 0); - return uart_set_options(&sport->port, co, baud, parity, bits, flow); + retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); + + clk_disable(sport->clk_ipg); + if (retval) { + clk_unprepare(sport->clk_ipg); + goto error_console; + } + + retval = clk_prepare(sport->clk_per); + if (retval) + clk_disable_unprepare(sport->clk_ipg); + +error_console: + return retval; } static struct uart_driver imx_reg; @@ -1555,9 +1583,6 @@ static int serial_imx_probe(struct platform_device *pdev) return ret; } - clk_prepare_enable(sport->clk_per); - clk_prepare_enable(sport->clk_ipg); - sport->port.uartclk = clk_get_rate(sport->clk_per); imx_ports[sport->port.line] = sport; @@ -1566,7 +1591,7 @@ static int serial_imx_probe(struct platform_device *pdev) if (pdata && pdata->init) { ret = pdata->init(pdev); if (ret) - goto clkput; + return ret; } ret = uart_add_one_port(&imx_reg, &sport->port); @@ -1574,18 +1599,10 @@ static int serial_imx_probe(struct platform_device *pdev) goto deinit; platform_set_drvdata(pdev, sport); - if (!uart_console(&sport->port)) { - clk_disable_unprepare(sport->clk_per); - clk_disable_unprepare(sport->clk_ipg); - } - return 0; deinit: if (pdata && pdata->exit) pdata->exit(pdev); -clkput: - clk_disable_unprepare(sport->clk_per); - clk_disable_unprepare(sport->clk_ipg); return ret; } -- cgit v0.10.2 From a496e6284c482555db8078190bb689594d129fa9 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Mon, 8 Jul 2013 17:14:17 +0800 Subject: serial: imx: distinguish the imx6q uart from the others We will add the DMA support for the imx uart. For the firmware's limit, only the imx6 serial chips (including the imx6q, imx6dl, imx6sl) can support the DMA. This patch adds the necessary macro and helper to distinguish the imx6q uart from the other imx uart. Other chips can use the "fsl,imx6q-uart" to enable the DMA support. This patch also replaces the check "is_imx21_uart()" with "!is_imx1_uart()". Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index e43064b..5bce536 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -186,6 +186,7 @@ enum imx_uart_type { IMX1_UART, IMX21_UART, + IMX6Q_UART, }; /* device type dependent stuff */ @@ -231,6 +232,10 @@ static struct imx_uart_data imx_uart_devdata[] = { .uts_reg = IMX21_UTS, .devtype = IMX21_UART, }, + [IMX6Q_UART] = { + .uts_reg = IMX21_UTS, + .devtype = IMX6Q_UART, + }, }; static struct platform_device_id imx_uart_devtype[] = { @@ -241,12 +246,16 @@ static struct platform_device_id imx_uart_devtype[] = { .name = "imx21-uart", .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART], }, { + .name = "imx6q-uart", + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART], + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(platform, imx_uart_devtype); static struct of_device_id imx_uart_dt_ids[] = { + { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], }, { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], }, { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], }, { /* sentinel */ } @@ -268,6 +277,10 @@ static inline int is_imx21_uart(struct imx_port *sport) return sport->devdata->devtype == IMX21_UART; } +static inline int is_imx6q_uart(struct imx_port *sport) +{ + return sport->devdata->devtype == IMX6Q_UART; +} /* * Save and restore functions for UCR1, UCR2 and UCR3 registers */ @@ -800,7 +813,7 @@ static int imx_startup(struct uart_port *port) } } - if (is_imx21_uart(sport)) { + if (!is_imx1_uart(sport)) { temp = readl(sport->port.membase + UCR3); temp |= IMX21_UCR3_RXDMUXSEL; writel(temp, sport->port.membase + UCR3); @@ -1043,7 +1056,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, writel(num, sport->port.membase + UBIR); writel(denom, sport->port.membase + UBMR); - if (is_imx21_uart(sport)) + if (!is_imx1_uart(sport)) writel(sport->port.uartclk / div / 1000, sport->port.membase + IMX21_ONEMS); -- cgit v0.10.2 From 09bd00f6e9a434727e4bfe93b0498c5d893c1906 Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Thu, 18 Jul 2013 18:52:49 +0200 Subject: serial/imx: fix custom-baudrate handling It was not possible to set custom-baudrates like 62500. Signed-off-by: Hubert Feurstein Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 5bce536..79d1943 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1028,6 +1028,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, */ div = 1; } else { + /* custom-baudrate handling */ + div = sport->port.uartclk / (baud * 16); + if (baud == 38400 && quot != div) + baud = sport->port.uartclk / (quot * 16); + div = sport->port.uartclk / (baud * 16); if (div > 7) div = 7; -- cgit v0.10.2 From b4cdc8f61beb2a55c8c3d22dfcaf5f34a919fe9b Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Mon, 8 Jul 2013 17:14:18 +0800 Subject: serial: imx: add DMA support for imx6q We only enable the DMA support when the following are meet: [1] The uart port supports the hardware flow control(CTS/RTS). (Some uart port does not support the CTS/RTS.) [2] The application enables the CTS/RTS. [3] The Soc is imx6q. For the sdma's firmware limit, we do not support the DMA except the imx6q platform. [4] The uart is not used as a console. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 79d1943..90655b8 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -48,9 +48,11 @@ #include #include #include +#include #include #include +#include /* Register definitions */ #define URXD0 0x0 /* Receiver Register */ @@ -82,6 +84,7 @@ #define UCR1_ADBR (1<<14) /* Auto detect baud rate */ #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ #define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_ICD_REG(x) (((x) & 3) << 10) /* idle condition detect */ #define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ #define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ #define UCR1_IREN (1<<7) /* Infrared interface enable */ @@ -90,6 +93,7 @@ #define UCR1_SNDBRK (1<<4) /* Send break */ #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ #define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */ +#define UCR1_ATDMAEN (1<<2) /* Aging DMA Timer Enable */ #define UCR1_DOZE (1<<1) /* Doze */ #define UCR1_UARTEN (1<<0) /* UART enabled */ #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ @@ -125,6 +129,7 @@ #define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ #define UCR4_WKEN (1<<7) /* Wake interrupt enable */ #define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IDDMAEN (1<<6) /* DMA IDLE Condition Detected */ #define UCR4_IRSC (1<<5) /* IR special case */ #define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ #define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ @@ -209,6 +214,19 @@ struct imx_port { struct clk *clk_ipg; struct clk *clk_per; const struct imx_uart_data *devdata; + + /* DMA fields */ + unsigned int dma_is_inited:1; + unsigned int dma_is_enabled:1; + unsigned int dma_is_rxing:1; + unsigned int dma_is_txing:1; + struct dma_chan *dma_chan_rx, *dma_chan_tx; + struct scatterlist rx_sgl, tx_sgl[2]; + void *rx_buf; + unsigned int rx_bytes, tx_bytes; + struct work_struct tsk_dma_rx, tsk_dma_tx; + unsigned int dma_tx_nents; + wait_queue_head_t dma_wait; }; struct imx_port_ucrs { @@ -399,6 +417,13 @@ static void imx_stop_tx(struct uart_port *port) return; } + /* + * We are maybe in the SMP context, so if the DMA TX thread is running + * on other cpu, we have to wait for it to finish. + */ + if (sport->dma_is_enabled && sport->dma_is_txing) + return; + temp = readl(sport->port.membase + UCR1); writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); } @@ -411,6 +436,13 @@ static void imx_stop_rx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + /* + * We are maybe in the SMP context, so if the DMA TX thread is running + * on other cpu, we have to wait for it to finish. + */ + if (sport->dma_is_enabled && sport->dma_is_rxing) + return; + temp = readl(sport->port.membase + UCR2); writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2); } @@ -446,6 +478,95 @@ static inline void imx_transmit_buffer(struct imx_port *sport) imx_stop_tx(&sport->port); } +static void dma_tx_callback(void *data) +{ + struct imx_port *sport = data; + struct scatterlist *sgl = &sport->tx_sgl[0]; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); + + sport->dma_is_txing = 0; + + /* update the stat */ + spin_lock_irqsave(&sport->port.lock, flags); + xmit->tail = (xmit->tail + sport->tx_bytes) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx += sport->tx_bytes; + spin_unlock_irqrestore(&sport->port.lock, flags); + + dev_dbg(sport->port.dev, "we finish the TX DMA.\n"); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (waitqueue_active(&sport->dma_wait)) { + wake_up(&sport->dma_wait); + dev_dbg(sport->port.dev, "exit in %s.\n", __func__); + return; + } + + schedule_work(&sport->tsk_dma_tx); +} + +static void dma_tx_work(struct work_struct *w) +{ + struct imx_port *sport = container_of(w, struct imx_port, tsk_dma_tx); + struct circ_buf *xmit = &sport->port.state->xmit; + struct scatterlist *sgl = sport->tx_sgl; + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = sport->dma_chan_tx; + struct device *dev = sport->port.dev; + enum dma_status status; + unsigned long flags; + int ret; + + status = chan->device->device_tx_status(chan, (dma_cookie_t)0, NULL); + if (DMA_IN_PROGRESS == status) + return; + + spin_lock_irqsave(&sport->port.lock, flags); + sport->tx_bytes = uart_circ_chars_pending(xmit); + if (sport->tx_bytes == 0) { + spin_unlock_irqrestore(&sport->port.lock, flags); + return; + } + + if (xmit->tail > xmit->head) { + sport->dma_tx_nents = 2; + sg_init_table(sgl, 2); + sg_set_buf(sgl, xmit->buf + xmit->tail, + UART_XMIT_SIZE - xmit->tail); + sg_set_buf(sgl + 1, xmit->buf, xmit->head); + } else { + sport->dma_tx_nents = 1; + sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); + } + spin_unlock_irqrestore(&sport->port.lock, flags); + + ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); + if (ret == 0) { + dev_err(dev, "DMA mapping error for TX.\n"); + return; + } + desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(dev, "We cannot prepare for the TX slave dma!\n"); + return; + } + desc->callback = dma_tx_callback; + desc->callback_param = sport; + + dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n", + uart_circ_chars_pending(xmit)); + /* fire it */ + sport->dma_is_txing = 1; + dmaengine_submit(desc); + dma_async_issue_pending(chan); + return; +} + /* * interrupts disabled on entry */ @@ -472,8 +593,10 @@ static void imx_start_tx(struct uart_port *port) temp |= UCR4_OREN; writel(temp, sport->port.membase + UCR4); - temp = readl(sport->port.membase + UCR1); - writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); + if (!sport->dma_is_enabled) { + temp = readl(sport->port.membase + UCR1); + writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); + } if (USE_IRDA(sport)) { temp = readl(sport->port.membase + UCR1); @@ -485,6 +608,15 @@ static void imx_start_tx(struct uart_port *port) writel(temp, sport->port.membase + UCR4); } + if (sport->dma_is_enabled) { + /* + * We may in the interrupt context, so arise a work_struct to + * do the real job. + */ + schedule_work(&sport->tsk_dma_tx); + return; + } + if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY) imx_transmit_buffer(sport); } @@ -600,6 +732,28 @@ out: return IRQ_HANDLED; } +/* + * If the RXFIFO is filled with some data, and then we + * arise a DMA operation to receive them. + */ +static void imx_dma_rxint(struct imx_port *sport) +{ + unsigned long temp; + + temp = readl(sport->port.membase + USR2); + if ((temp & USR2_RDR) && !sport->dma_is_rxing) { + sport->dma_is_rxing = 1; + + /* disable the `Recerver Ready Interrrupt` */ + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_RRDYEN); + writel(temp, sport->port.membase + UCR1); + + /* tell the DMA to receive the data. */ + schedule_work(&sport->tsk_dma_rx); + } +} + static irqreturn_t imx_int(int irq, void *dev_id) { struct imx_port *sport = dev_id; @@ -608,8 +762,12 @@ static irqreturn_t imx_int(int irq, void *dev_id) sts = readl(sport->port.membase + USR1); - if (sts & USR1_RRDY) - imx_rxint(irq, dev_id); + if (sts & USR1_RRDY) { + if (sport->dma_is_enabled) + imx_dma_rxint(sport); + else + imx_rxint(irq, dev_id); + } if (sts & USR1_TRDY && readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) @@ -666,7 +824,8 @@ static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; if (mctrl & TIOCM_RTS) - temp |= UCR2_CTS; + if (!sport->dma_is_enabled) + temp |= UCR2_CTS; writel(temp, sport->port.membase + UCR2); } @@ -705,6 +864,226 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) return 0; } +#define RX_BUF_SIZE (PAGE_SIZE) +static int start_rx_dma(struct imx_port *sport); +static void dma_rx_work(struct work_struct *w) +{ + struct imx_port *sport = container_of(w, struct imx_port, tsk_dma_rx); + struct tty_port *port = &sport->port.state->port; + + if (sport->rx_bytes) { + tty_insert_flip_string(port, sport->rx_buf, sport->rx_bytes); + tty_flip_buffer_push(port); + sport->rx_bytes = 0; + } + + if (sport->dma_is_rxing) + start_rx_dma(sport); +} + +static void imx_rx_dma_done(struct imx_port *sport) +{ + unsigned long temp; + + /* Enable this interrupt when the RXFIFO is empty. */ + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RRDYEN; + writel(temp, sport->port.membase + UCR1); + + sport->dma_is_rxing = 0; + + /* Is the shutdown waiting for us? */ + if (waitqueue_active(&sport->dma_wait)) + wake_up(&sport->dma_wait); +} + +/* + * There are three kinds of RX DMA interrupts(such as in the MX6Q): + * [1] the RX DMA buffer is full. + * [2] the Aging timer expires(wait for 8 bytes long) + * [3] the Idle Condition Detect(enabled the UCR4_IDDMAEN). + * + * The [2] is trigger when a character was been sitting in the FIFO + * meanwhile [3] can wait for 32 bytes long when the RX line is + * on IDLE state and RxFIFO is empty. + */ +static void dma_rx_callback(void *data) +{ + struct imx_port *sport = data; + struct dma_chan *chan = sport->dma_chan_rx; + struct scatterlist *sgl = &sport->rx_sgl; + struct dma_tx_state state; + enum dma_status status; + unsigned int count; + + /* unmap it first */ + dma_unmap_sg(sport->port.dev, sgl, 1, DMA_FROM_DEVICE); + + status = chan->device->device_tx_status(chan, (dma_cookie_t)0, &state); + count = RX_BUF_SIZE - state.residue; + dev_dbg(sport->port.dev, "We get %d bytes.\n", count); + + if (count) { + sport->rx_bytes = count; + schedule_work(&sport->tsk_dma_rx); + } else + imx_rx_dma_done(sport); +} + +static int start_rx_dma(struct imx_port *sport) +{ + struct scatterlist *sgl = &sport->rx_sgl; + struct dma_chan *chan = sport->dma_chan_rx; + struct device *dev = sport->port.dev; + struct dma_async_tx_descriptor *desc; + int ret; + + sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE); + ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE); + if (ret == 0) { + dev_err(dev, "DMA mapping error for RX.\n"); + return -EINVAL; + } + desc = dmaengine_prep_slave_sg(chan, sgl, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(dev, "We cannot prepare for the RX slave dma!\n"); + return -EINVAL; + } + desc->callback = dma_rx_callback; + desc->callback_param = sport; + + dev_dbg(dev, "RX: prepare for the DMA.\n"); + dmaengine_submit(desc); + dma_async_issue_pending(chan); + return 0; +} + +static void imx_uart_dma_exit(struct imx_port *sport) +{ + if (sport->dma_chan_rx) { + dma_release_channel(sport->dma_chan_rx); + sport->dma_chan_rx = NULL; + + kfree(sport->rx_buf); + sport->rx_buf = NULL; + } + + if (sport->dma_chan_tx) { + dma_release_channel(sport->dma_chan_tx); + sport->dma_chan_tx = NULL; + } + + sport->dma_is_inited = 0; +} + +static int imx_uart_dma_init(struct imx_port *sport) +{ + struct dma_slave_config slave_config; + struct device *dev = sport->port.dev; + int ret; + + /* Prepare for RX : */ + sport->dma_chan_rx = dma_request_slave_channel(dev, "rx"); + if (!sport->dma_chan_rx) { + dev_dbg(dev, "cannot get the DMA channel.\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_DEV_TO_MEM; + slave_config.src_addr = sport->port.mapbase + URXD0; + slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + slave_config.src_maxburst = RXTL; + ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config); + if (ret) { + dev_err(dev, "error in RX dma configuration.\n"); + goto err; + } + + sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!sport->rx_buf) { + dev_err(dev, "cannot alloc DMA buffer.\n"); + ret = -ENOMEM; + goto err; + } + sport->rx_bytes = 0; + + /* Prepare for TX : */ + sport->dma_chan_tx = dma_request_slave_channel(dev, "tx"); + if (!sport->dma_chan_tx) { + dev_err(dev, "cannot get the TX DMA channel!\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_MEM_TO_DEV; + slave_config.dst_addr = sport->port.mapbase + URTX0; + slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + slave_config.dst_maxburst = TXTL; + ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config); + if (ret) { + dev_err(dev, "error in TX dma configuration."); + goto err; + } + + sport->dma_is_inited = 1; + + return 0; +err: + imx_uart_dma_exit(sport); + return ret; +} + +static void imx_enable_dma(struct imx_port *sport) +{ + unsigned long temp; + struct tty_port *port = &sport->port.state->port; + + port->low_latency = 1; + INIT_WORK(&sport->tsk_dma_tx, dma_tx_work); + INIT_WORK(&sport->tsk_dma_rx, dma_rx_work); + init_waitqueue_head(&sport->dma_wait); + + /* set UCR1 */ + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN | + /* wait for 32 idle frames for IDDMA interrupt */ + UCR1_ICD_REG(3); + writel(temp, sport->port.membase + UCR1); + + /* set UCR4 */ + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_IDDMAEN; + writel(temp, sport->port.membase + UCR4); + + sport->dma_is_enabled = 1; +} + +static void imx_disable_dma(struct imx_port *sport) +{ + unsigned long temp; + struct tty_port *port = &sport->port.state->port; + + /* clear UCR1 */ + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN); + writel(temp, sport->port.membase + UCR1); + + /* clear UCR2 */ + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_CTSC | UCR2_CTS); + writel(temp, sport->port.membase + UCR2); + + /* clear UCR4 */ + temp = readl(sport->port.membase + UCR4); + temp &= ~UCR4_IDDMAEN; + writel(temp, sport->port.membase + UCR4); + + sport->dma_is_enabled = 0; + port->low_latency = 0; +} + /* half the RX buffer size */ #define CTSTL 16 @@ -869,6 +1248,15 @@ static void imx_shutdown(struct uart_port *port) unsigned long temp; unsigned long flags; + if (sport->dma_is_enabled) { + /* We have to wait for the DMA to finish. */ + wait_event(sport->dma_wait, + !sport->dma_is_rxing && !sport->dma_is_txing); + imx_stop_rx(port); + imx_disable_dma(sport); + imx_uart_dma_exit(sport); + } + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR2); temp &= ~(UCR2_TXEN); @@ -955,6 +1343,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, if (sport->have_rtscts) { ucr2 &= ~UCR2_IRTS; ucr2 |= UCR2_CTSC; + + /* Can we enable the DMA support? */ + if (is_imx6q_uart(sport) && !uart_console(port) + && !sport->dma_is_inited) + imx_uart_dma_init(sport); } else { termios->c_cflag &= ~CRTSCTS; } @@ -1073,6 +1466,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) imx_enable_ms(&sport->port); + if (sport->dma_is_inited && !sport->dma_is_enabled) + imx_enable_dma(sport); spin_unlock_irqrestore(&sport->port.lock, flags); } -- cgit v0.10.2 From 10d8b34a421716d55a4ff7c2d427c35e88b8fd60 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 29 Jun 2013 10:44:17 +0400 Subject: serial: max310x: Driver rework This patch rework max310x driver. Major changes have been made: - Prepare driver to support ICs with more than one UART. - Prepare driver to support work with I2C-bus. The patch changes almost every function and can not be divided into parts. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5e3d689..25772c1 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -291,9 +291,9 @@ config SERIAL_MAX3100 config SERIAL_MAX310X bool "MAX310X support" - depends on SPI + depends on SPI_MASTER select SERIAL_CORE - select REGMAP_SPI if SPI + select REGMAP_SPI if SPI_MASTER default n help This selects support for an advanced UART from Maxim (Dallas). diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 8941e64..4620289 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1,7 +1,7 @@ /* * Maxim (Dallas) MAX3107/8 serial driver * - * Copyright (C) 2012 Alexander Shiyan + * Copyright (C) 2012-2013 Alexander Shiyan * * Based on max3100.c, by Christian Pellegrin * Based on max3110.c, by Feng Tang @@ -17,7 +17,9 @@ /* TODO: MAX14830 support (Quad) */ #include +#include #include +#include #include #include #include @@ -25,8 +27,10 @@ #include #include #include + #include +#define MAX310X_NAME "max310x" #define MAX310X_MAJOR 204 #define MAX310X_MINOR 209 @@ -37,7 +41,8 @@ #define MAX310X_IRQSTS_REG (0x02) /* IRQ status */ #define MAX310X_LSR_IRQEN_REG (0x03) /* LSR IRQ enable */ #define MAX310X_LSR_IRQSTS_REG (0x04) /* LSR IRQ status */ -#define MAX310X_SPCHR_IRQEN_REG (0x05) /* Special char IRQ enable */ +#define MAX310X_REG_05 (0x05) +#define MAX310X_SPCHR_IRQEN_REG MAX310X_REG_05 /* Special char IRQ en */ #define MAX310X_SPCHR_IRQSTS_REG (0x06) /* Special char IRQ status */ #define MAX310X_STS_IRQEN_REG (0x07) /* Status IRQ enable */ #define MAX310X_STS_IRQSTS_REG (0x08) /* Status IRQ status */ @@ -63,8 +68,15 @@ #define MAX310X_BRGDIVLSB_REG (0x1c) /* Baud rate divisor LSB */ #define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */ #define MAX310X_CLKSRC_REG (0x1e) /* Clock source */ -/* Only present in MAX3107 */ -#define MAX3107_REVID_REG (0x1f) /* Revision identification */ +#define MAX310X_REG_1F (0x1f) + +#define MAX310X_REVID_REG MAX310X_REG_1F /* Revision ID */ + +#define MAX310X_GLOBALIRQ_REG MAX310X_REG_1F /* Global IRQ (RO) */ +#define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */ + +/* Extended registers */ +#define MAX310X_REVID_EXTREG MAX310X_REG_05 /* Revision ID */ /* IRQ register bits */ #define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ @@ -246,58 +258,139 @@ #define MAX310X_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ #define MAX310X_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ +/* Global commands */ +#define MAX310X_EXTREG_ENBL (0xce) +#define MAX310X_EXTREG_DSBL (0xcd) + /* Misc definitions */ #define MAX310X_FIFO_SIZE (128) +#define MAX310x_REV_MASK (0xfc) /* MAX3107 specific */ #define MAX3107_REV_ID (0xa0) -#define MAX3107_REV_MASK (0xfe) - -/* IRQ status bits definitions */ -#define MAX310X_IRQ_TX (MAX310X_IRQ_TXFIFO_BIT | \ - MAX310X_IRQ_TXEMPTY_BIT) -#define MAX310X_IRQ_RX (MAX310X_IRQ_RXFIFO_BIT | \ - MAX310X_IRQ_RXEMPTY_BIT) - -/* Supported chip types */ -enum { - MAX310X_TYPE_MAX3107 = 3107, - MAX310X_TYPE_MAX3108 = 3108, + +struct max310x_devtype { + char name[9]; + int nr; + int (*detect)(struct device *); + void (*power)(struct uart_port *, int); }; -struct max310x_port { - struct uart_driver uart; +struct max310x_one { struct uart_port port; + struct work_struct tx_work; +}; - const char *name; - int uartclk; - - unsigned int nr_gpio; +struct max310x_port { + struct uart_driver uart; + struct max310x_devtype *devtype; + struct regmap *regmap; + struct regmap_config regcfg; + struct mutex mutex; + struct max310x_pdata *pdata; + int gpio_used; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif + struct max310x_one p[0]; +}; - struct regmap *regmap; - struct regmap_config regcfg; +static u8 max310x_port_read(struct uart_port *port, u8 reg) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + unsigned int val = 0; - struct workqueue_struct *wq; - struct work_struct tx_work; + regmap_read(s->regmap, port->iobase + reg, &val); - struct mutex max310x_mutex; + return val; +} - struct max310x_pdata *pdata; +static void max310x_port_write(struct uart_port *port, u8 reg, u8 val) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + regmap_write(s->regmap, port->iobase + reg, val); +} + +static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + regmap_update_bits(s->regmap, port->iobase + reg, mask, val); +} + +static int max3107_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_read(s->regmap, MAX310X_REVID_REG, &val); + if (ret) + return ret; + + if (((val & MAX310x_REV_MASK) != MAX3107_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static int max3108_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + /* MAX3108 have not REV ID register, we just check default value + * from clocksource register to make sure everything works. + */ + ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); + if (ret) + return ret; + + if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT)) { + dev_err(dev, "%s not present\n", s->devtype->name); + return -ENODEV; + } + + return 0; +} + +static void max310x_power(struct uart_port *port, int on) +{ + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_FORCESLEEP_BIT, + on ? 0 : MAX310X_MODE1_FORCESLEEP_BIT); + if (on) + msleep(50); +} + +static const struct max310x_devtype max3107_devtype = { + .name = "MAX3107", + .nr = 1, + .detect = max3107_detect, + .power = max310x_power, }; -static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg) +static const struct max310x_devtype max3108_devtype = { + .name = "MAX3108", + .nr = 1, + .detect = max3108_detect, + .power = max310x_power, +}; + +static bool max310x_reg_writeable(struct device *dev, unsigned int reg) { - switch (reg) { + switch (reg & 0x1f) { case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: case MAX310X_STS_IRQSTS_REG: case MAX310X_TXFIFOLVL_REG: case MAX310X_RXFIFOLVL_REG: - case MAX3107_REVID_REG: /* Only available on MAX3107 */ return false; default: break; @@ -308,7 +401,7 @@ static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg) static bool max310x_reg_volatile(struct device *dev, unsigned int reg) { - switch (reg) { + switch (reg & 0x1f) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: @@ -317,6 +410,9 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg) case MAX310X_TXFIFOLVL_REG: case MAX310X_RXFIFOLVL_REG: case MAX310X_GPIODATA_REG: + case MAX310X_BRGDIVLSB_REG: + case MAX310X_REG_05: + case MAX310X_REG_1F: return true; default: break; @@ -327,7 +423,7 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg) static bool max310x_reg_precious(struct device *dev, unsigned int reg) { - switch (reg) { + switch (reg & 0x1f) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: @@ -340,42 +436,25 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) return false; } -static void max310x_set_baud(struct max310x_port *s, int baud) +static void max310x_set_baud(struct uart_port *port, int baud) { - unsigned int mode = 0, div = s->uartclk / baud; + unsigned int mode = 0, div = port->uartclk / baud; if (!(div / 16)) { /* Mode x2 */ mode = MAX310X_BRGCFG_2XMODE_BIT; - div = (s->uartclk * 2) / baud; + div = (port->uartclk * 2) / baud; } if (!(div / 16)) { /* Mode x4 */ mode = MAX310X_BRGCFG_4XMODE_BIT; - div = (s->uartclk * 4) / baud; + div = (port->uartclk * 4) / baud; } - regmap_write(s->regmap, MAX310X_BRGDIVMSB_REG, - ((div / 16) >> 8) & 0xff); - regmap_write(s->regmap, MAX310X_BRGDIVLSB_REG, (div / 16) & 0xff); - regmap_write(s->regmap, MAX310X_BRGCFG_REG, (div % 16) | mode); -} - -static void max310x_wait_pll(struct max310x_port *s) -{ - int tryes = 1000; - - /* Wait for PLL only if crystal is used */ - if (!(s->pdata->driver_flags & MAX310X_EXT_CLK)) { - unsigned int sts = 0; - - while (tryes--) { - regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &sts); - if (sts & MAX310X_STS_CLKREADY_BIT) - break; - } - } + max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8); + max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16); + max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode); } static int max310x_update_best_err(unsigned long f, long *besterr) @@ -449,49 +528,49 @@ static int max310x_set_ref_clk(struct max310x_port *s) regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); - if (pllcfg) - max310x_wait_pll(s); - - dev_dbg(s->port.dev, "Reference clock set to %lu Hz\n", bestfreq); + /* Wait for crystal */ + if (pllcfg && !(s->pdata->driver_flags & MAX310X_EXT_CLK)) + msleep(10); return (int)bestfreq; } -static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen) +static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) { - unsigned int sts = 0, ch = 0, flag; + unsigned int sts, ch, flag; - if (unlikely(rxlen >= MAX310X_FIFO_SIZE)) { - dev_warn(s->port.dev, "Possible RX FIFO overrun %d\n", rxlen); + if (unlikely(rxlen >= port->fifosize)) { + dev_warn_ratelimited(port->dev, + "Port %i: Possible RX FIFO overrun\n", + port->line); + port->icount.buf_overrun++; /* Ensure sanity of RX level */ - rxlen = MAX310X_FIFO_SIZE; + rxlen = port->fifosize; } - dev_dbg(s->port.dev, "RX Len = %u\n", rxlen); - while (rxlen--) { - regmap_read(s->regmap, MAX310X_RHR_REG, &ch); - regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &sts); + ch = max310x_port_read(port, MAX310X_RHR_REG); + sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT | MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT; - s->port.icount.rx++; + port->icount.rx++; flag = TTY_NORMAL; if (unlikely(sts)) { if (sts & MAX310X_LSR_RXBRK_BIT) { - s->port.icount.brk++; - if (uart_handle_break(&s->port)) + port->icount.brk++; + if (uart_handle_break(port)) continue; } else if (sts & MAX310X_LSR_RXPAR_BIT) - s->port.icount.parity++; + port->icount.parity++; else if (sts & MAX310X_LSR_FRERR_BIT) - s->port.icount.frame++; + port->icount.frame++; else if (sts & MAX310X_LSR_RXOVR_BIT) - s->port.icount.overrun++; + port->icount.overrun++; - sts &= s->port.read_status_mask; + sts &= port->read_status_mask; if (sts & MAX310X_LSR_RXBRK_BIT) flag = TTY_BREAK; else if (sts & MAX310X_LSR_RXPAR_BIT) @@ -502,129 +581,129 @@ static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen) flag = TTY_OVERRUN; } - if (uart_handle_sysrq_char(s->port, ch)) + if (uart_handle_sysrq_char(port, ch)) continue; - if (sts & s->port.ignore_status_mask) + if (sts & port->ignore_status_mask) continue; - uart_insert_char(&s->port, sts, MAX310X_LSR_RXOVR_BIT, - ch, flag); + uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, ch, flag); } - tty_flip_buffer_push(&s->port.state->port); + tty_flip_buffer_push(&port->state->port); } -static void max310x_handle_tx(struct max310x_port *s) +static void max310x_handle_tx(struct uart_port *port) { - struct circ_buf *xmit = &s->port.state->xmit; - unsigned int txlen = 0, to_send; + struct circ_buf *xmit = &port->state->xmit; + unsigned int txlen, to_send; - if (unlikely(s->port.x_char)) { - regmap_write(s->regmap, MAX310X_THR_REG, s->port.x_char); - s->port.icount.tx++; - s->port.x_char = 0; + if (unlikely(port->x_char)) { + max310x_port_write(port, MAX310X_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; return; } - if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) return; /* Get length of data pending in circular buffer */ to_send = uart_circ_chars_pending(xmit); if (likely(to_send)) { /* Limit to size of TX FIFO */ - regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &txlen); - txlen = MAX310X_FIFO_SIZE - txlen; + txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + txlen = port->fifosize - txlen; to_send = (to_send > txlen) ? txlen : to_send; - dev_dbg(s->port.dev, "TX Len = %u\n", to_send); - /* Add data to send */ - s->port.icount.tx += to_send; + port->icount.tx += to_send; while (to_send--) { - regmap_write(s->regmap, MAX310X_THR_REG, - xmit->buf[xmit->tail]); + max310x_port_write(port, MAX310X_THR_REG, + xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); }; } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); + uart_write_wakeup(port); } -static irqreturn_t max310x_ist(int irq, void *dev_id) +static void max310x_port_irq(struct max310x_port *s, int portno) { - struct max310x_port *s = (struct max310x_port *)dev_id; - unsigned int ists = 0, lsr = 0, rxlen = 0; + struct uart_port *port = &s->p[portno].port; - mutex_lock(&s->max310x_mutex); + do { + unsigned int ists, lsr, rxlen; - for (;;) { /* Read IRQ status & RX FIFO level */ - regmap_read(s->regmap, MAX310X_IRQSTS_REG, &ists); - regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &lsr); - regmap_read(s->regmap, MAX310X_RXFIFOLVL_REG, &rxlen); - if (!ists && !(lsr & MAX310X_LSR_RXTO_BIT) && !rxlen) + ists = max310x_port_read(port, MAX310X_IRQSTS_REG); + rxlen = max310x_port_read(port, MAX310X_RXFIFOLVL_REG); + if (!ists && !rxlen) break; - dev_dbg(s->port.dev, "IRQ status: 0x%02x\n", ists); - - if (rxlen) - max310x_handle_rx(s, rxlen); - if (ists & MAX310X_IRQ_TX) - max310x_handle_tx(s); - if (ists & MAX310X_IRQ_CTS_BIT) - uart_handle_cts_change(&s->port, + if (ists & MAX310X_IRQ_CTS_BIT) { + lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + uart_handle_cts_change(port, !!(lsr & MAX310X_LSR_CTS_BIT)); - } + } + if (rxlen) + max310x_handle_rx(port, rxlen); + if (ists & MAX310X_IRQ_TXEMPTY_BIT) { + mutex_lock(&s->mutex); + max310x_handle_tx(port); + mutex_unlock(&s->mutex); + } + } while (1); +} - mutex_unlock(&s->max310x_mutex); +static irqreturn_t max310x_ist(int irq, void *dev_id) +{ + struct max310x_port *s = (struct max310x_port *)dev_id; + + if (s->uart.nr > 1) { + do { + unsigned int val = ~0; + + WARN_ON_ONCE(regmap_read(s->regmap, + MAX310X_GLOBALIRQ_REG, &val)); + val = ((1 << s->uart.nr) - 1) & ~val; + if (!val) + break; + max310x_port_irq(s, fls(val) - 1); + } while (1); + } else + max310x_port_irq(s, 0); return IRQ_HANDLED; } static void max310x_wq_proc(struct work_struct *ws) { - struct max310x_port *s = container_of(ws, struct max310x_port, tx_work); + struct max310x_one *one = container_of(ws, struct max310x_one, tx_work); + struct max310x_port *s = dev_get_drvdata(one->port.dev); - mutex_lock(&s->max310x_mutex); - max310x_handle_tx(s); - mutex_unlock(&s->max310x_mutex); + mutex_lock(&s->mutex); + max310x_handle_tx(&one->port); + mutex_unlock(&s->mutex); } static void max310x_start_tx(struct uart_port *port) { - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_one *one = container_of(port, struct max310x_one, port); - queue_work(s->wq, &s->tx_work); -} - -static void max310x_stop_tx(struct uart_port *port) -{ - /* Do nothing */ -} - -static void max310x_stop_rx(struct uart_port *port) -{ - /* Do nothing */ + if (!work_pending(&one->tx_work)) + schedule_work(&one->tx_work); } static unsigned int max310x_tx_empty(struct uart_port *port) { - unsigned int val = 0; - struct max310x_port *s = container_of(port, struct max310x_port, port); - - mutex_lock(&s->max310x_mutex); - regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &val); - mutex_unlock(&s->max310x_mutex); + unsigned int lvl, sts; - return val ? 0 : TIOCSER_TEMT; -} + lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + sts = max310x_port_read(port, MAX310X_IRQSTS_REG); -static void max310x_enable_ms(struct uart_port *port) -{ - /* Modem status not supported */ + return ((sts & MAX310X_IRQ_TXEMPTY_BIT) && !lvl) ? TIOCSER_TEMT : 0; } static unsigned int max310x_get_mctrl(struct uart_port *port) @@ -644,28 +723,20 @@ static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl) static void max310x_break_ctl(struct uart_port *port, int break_state) { - struct max310x_port *s = container_of(port, struct max310x_port, port); - - mutex_lock(&s->max310x_mutex); - regmap_update_bits(s->regmap, MAX310X_LCR_REG, - MAX310X_LCR_TXBREAK_BIT, - break_state ? MAX310X_LCR_TXBREAK_BIT : 0); - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_LCR_REG, + MAX310X_LCR_TXBREAK_BIT, + break_state ? MAX310X_LCR_TXBREAK_BIT : 0); } static void max310x_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct max310x_port *s = container_of(port, struct max310x_port, port); unsigned int lcr, flow = 0; int baud; - mutex_lock(&s->max310x_mutex); - /* Mask termios capabilities we don't support */ termios->c_cflag &= ~CMSPAR; - termios->c_iflag &= ~IXANY; /* Word size */ switch (termios->c_cflag & CSIZE) { @@ -696,7 +767,7 @@ static void max310x_set_termios(struct uart_port *port, lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */ /* Update LCR register */ - regmap_write(s->regmap, MAX310X_LCR_REG, lcr); + max310x_port_write(port, MAX310X_LCR_REG, lcr); /* Set read status mask */ port->read_status_mask = MAX310X_LSR_RXOVR_BIT; @@ -717,8 +788,8 @@ static void max310x_set_termios(struct uart_port *port, MAX310X_LSR_RXBRK_BIT; /* Configure flow control */ - regmap_write(s->regmap, MAX310X_XON1_REG, termios->c_cc[VSTART]); - regmap_write(s->regmap, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); + max310x_port_write(port, MAX310X_XON1_REG, termios->c_cc[VSTART]); + max310x_port_write(port, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); if (termios->c_cflag & CRTSCTS) flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT | MAX310X_FLOWCTRL_AUTORTS_BIT; @@ -728,7 +799,7 @@ static void max310x_set_termios(struct uart_port *port, if (termios->c_iflag & IXOFF) flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT | MAX310X_FLOWCTRL_SWFLOWEN_BIT; - regmap_write(s->regmap, MAX310X_FLOWCTRL_REG, flow); + max310x_port_write(port, MAX310X_FLOWCTRL_REG, flow); /* Get baud rate generator configuration */ baud = uart_get_baud_rate(port, termios, old, @@ -736,36 +807,30 @@ static void max310x_set_termios(struct uart_port *port, port->uartclk / 4); /* Setup baudrate generator */ - max310x_set_baud(s, baud); + max310x_set_baud(port, baud); /* Update timeout according to new baud rate */ uart_update_timeout(port, termios->c_cflag, baud); - - mutex_unlock(&s->max310x_mutex); } static int max310x_startup(struct uart_port *port) { unsigned int val, line = port->line; - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_port *s = dev_get_drvdata(port->dev); - if (s->pdata->suspend) - s->pdata->suspend(0); - - mutex_lock(&s->max310x_mutex); + s->devtype->power(port, 1); /* Configure baud rate, 9600 as default */ - max310x_set_baud(s, 9600); + max310x_set_baud(port, 9600); /* Configure LCR register, 8N1 mode by default */ - val = MAX310X_LCR_WORD_LEN_8; - regmap_write(s->regmap, MAX310X_LCR_REG, val); + max310x_port_write(port, MAX310X_LCR_REG, MAX310X_LCR_WORD_LEN_8); /* Configure MODE1 register */ - regmap_update_bits(s->regmap, MAX310X_MODE1_REG, - MAX310X_MODE1_TRNSCVCTRL_BIT, - (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL) - ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0); + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL) + ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0); /* Configure MODE2 register */ val = MAX310X_MODE2_RXEMPTINV_BIT; @@ -776,63 +841,40 @@ static int max310x_startup(struct uart_port *port) /* Reset FIFOs */ val |= MAX310X_MODE2_FIFORST_BIT; - regmap_write(s->regmap, MAX310X_MODE2_REG, val); - - /* Configure FIFO trigger level register */ - /* RX FIFO trigger for 16 words, TX FIFO trigger for 64 words */ - val = MAX310X_FIFOTRIGLVL_RX(16) | MAX310X_FIFOTRIGLVL_TX(64); - regmap_write(s->regmap, MAX310X_FIFOTRIGLVL_REG, val); + max310x_port_write(port, MAX310X_MODE2_REG, val); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_FIFORST_BIT, 0); /* Configure flow control levels */ /* Flow control halt level 96, resume level 48 */ - val = MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96); - regmap_write(s->regmap, MAX310X_FLOWLVL_REG, val); - - /* Clear timeout register */ - regmap_write(s->regmap, MAX310X_RXTO_REG, 0); - - /* Configure LSR interrupt enable register */ - /* Enable RX timeout interrupt */ - val = MAX310X_LSR_RXTO_BIT; - regmap_write(s->regmap, MAX310X_LSR_IRQEN_REG, val); + max310x_port_write(port, MAX310X_FLOWLVL_REG, + MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96)); - /* Clear FIFO reset */ - regmap_update_bits(s->regmap, MAX310X_MODE2_REG, - MAX310X_MODE2_FIFORST_BIT, 0); + /* Clear IRQ status register */ + max310x_port_read(port, MAX310X_IRQSTS_REG); - /* Clear IRQ status register by reading it */ - regmap_read(s->regmap, MAX310X_IRQSTS_REG, &val); - - /* Configure interrupt enable register */ - /* Enable CTS change interrupt */ - val = MAX310X_IRQ_CTS_BIT; - /* Enable RX, TX interrupts */ - val |= MAX310X_IRQ_RX | MAX310X_IRQ_TX; - regmap_write(s->regmap, MAX310X_IRQEN_REG, val); - - mutex_unlock(&s->max310x_mutex); + /* Enable RX, TX, CTS change interrupts */ + val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT; + max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT); return 0; } static void max310x_shutdown(struct uart_port *port) { - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_port *s = dev_get_drvdata(port->dev); /* Disable all interrupts */ - mutex_lock(&s->max310x_mutex); - regmap_write(s->regmap, MAX310X_IRQEN_REG, 0); - mutex_unlock(&s->max310x_mutex); + max310x_port_write(port, MAX310X_IRQEN_REG, 0); - if (s->pdata->suspend) - s->pdata->suspend(1); + s->devtype->power(port, 0); } static const char *max310x_type(struct uart_port *port) { - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_port *s = dev_get_drvdata(port->dev); - return (port->type == PORT_MAX310X) ? s->name : NULL; + return (port->type == PORT_MAX310X) ? s->devtype->name : NULL; } static int max310x_request_port(struct uart_port *port) @@ -841,134 +883,100 @@ static int max310x_request_port(struct uart_port *port) return 0; } -static void max310x_release_port(struct uart_port *port) -{ - /* Do nothing */ -} - static void max310x_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) port->type = PORT_MAX310X; } -static int max310x_verify_port(struct uart_port *port, struct serial_struct *ser) +static int max310x_verify_port(struct uart_port *port, struct serial_struct *s) { - if ((ser->type == PORT_UNKNOWN) || (ser->type == PORT_MAX310X)) - return 0; - if (ser->irq == port->irq) - return 0; + if ((s->type != PORT_UNKNOWN) && (s->type != PORT_MAX310X)) + return -EINVAL; + if (s->irq != port->irq) + return -EINVAL; - return -EINVAL; + return 0; } -static struct uart_ops max310x_ops = { +static void max310x_null_void(struct uart_port *port) +{ + /* Do nothing */ +} + +static const struct uart_ops max310x_ops = { .tx_empty = max310x_tx_empty, .set_mctrl = max310x_set_mctrl, .get_mctrl = max310x_get_mctrl, - .stop_tx = max310x_stop_tx, + .stop_tx = max310x_null_void, .start_tx = max310x_start_tx, - .stop_rx = max310x_stop_rx, - .enable_ms = max310x_enable_ms, + .stop_rx = max310x_null_void, + .enable_ms = max310x_null_void, .break_ctl = max310x_break_ctl, .startup = max310x_startup, .shutdown = max310x_shutdown, .set_termios = max310x_set_termios, .type = max310x_type, .request_port = max310x_request_port, - .release_port = max310x_release_port, + .release_port = max310x_null_void, .config_port = max310x_config_port, .verify_port = max310x_verify_port, }; -#ifdef CONFIG_PM_SLEEP - -static int max310x_suspend(struct device *dev) +static int __maybe_unused max310x_suspend(struct spi_device *spi, + pm_message_t state) { - int ret; - struct max310x_port *s = dev_get_drvdata(dev); - - dev_dbg(dev, "Suspend\n"); + struct max310x_port *s = dev_get_drvdata(&spi->dev); + int i; - ret = uart_suspend_port(&s->uart, &s->port); - - mutex_lock(&s->max310x_mutex); - - /* Enable sleep mode */ - regmap_update_bits(s->regmap, MAX310X_MODE1_REG, - MAX310X_MODE1_FORCESLEEP_BIT, - MAX310X_MODE1_FORCESLEEP_BIT); - - mutex_unlock(&s->max310x_mutex); - - if (s->pdata->suspend) - s->pdata->suspend(1); + for (i = 0; i < s->uart.nr; i++) { + uart_suspend_port(&s->uart, &s->p[i].port); + s->devtype->power(&s->p[i].port, 0); + } - return ret; + return 0; } -static int max310x_resume(struct device *dev) +static int __maybe_unused max310x_resume(struct spi_device *spi) { - struct max310x_port *s = dev_get_drvdata(dev); - - dev_dbg(dev, "Resume\n"); - - if (s->pdata->suspend) - s->pdata->suspend(0); - - mutex_lock(&s->max310x_mutex); + struct max310x_port *s = dev_get_drvdata(&spi->dev); + int i; - /* Disable sleep mode */ - regmap_update_bits(s->regmap, MAX310X_MODE1_REG, - MAX310X_MODE1_FORCESLEEP_BIT, - 0); - - max310x_wait_pll(s); - - mutex_unlock(&s->max310x_mutex); + for (i = 0; i < s->uart.nr; i++) { + s->devtype->power(&s->p[i].port, 1); + uart_resume_port(&s->uart, &s->p[i].port); + } - return uart_resume_port(&s->uart, &s->port); + return 0; } -static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); -#define MAX310X_PM_OPS (&max310x_pm_ops) - -#else -#define MAX310X_PM_OPS NULL -#endif - #ifdef CONFIG_GPIOLIB static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) { - unsigned int val = 0; + unsigned int val; struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - regmap_read(s->regmap, MAX310X_GPIODATA_REG, &val); - mutex_unlock(&s->max310x_mutex); + val = max310x_port_read(port, MAX310X_GPIODATA_REG); - return !!((val >> 4) & (1 << offset)); + return !!((val >> 4) & (1 << (offset % 4))); } static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ? - 1 << offset : 0); - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); } static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - - regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, 0); - - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), 0); return 0; } @@ -977,74 +985,42 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - - regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, - 1 << offset); - regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ? - 1 << offset : 0); - - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), + 1 << (offset % 4)); return 0; } #endif -/* Generic platform data */ -static struct max310x_pdata generic_plat_data = { - .driver_flags = MAX310X_EXT_CLK, - .uart_flags[0] = MAX310X_ECHO_SUPRESS, - .frequency = 26000000, -}; - -static int max310x_probe(struct spi_device *spi) +static int max310x_probe(struct device *dev, int is_spi, + struct max310x_devtype *devtype, int irq) { struct max310x_port *s; - struct device *dev = &spi->dev; - int chiptype = spi_get_device_id(spi)->driver_data; - struct max310x_pdata *pdata = dev->platform_data; - unsigned int val = 0; - int ret; + struct max310x_pdata *pdata = dev_get_platdata(dev); + int i, ret, uartclk; /* Check for IRQ */ - if (spi->irq <= 0) { + if (irq <= 0) { dev_err(dev, "No IRQ specified\n"); return -ENOTSUPP; } + if (!pdata) { + dev_err(dev, "No platform data supplied\n"); + return -EINVAL; + } + /* Alloc port structure */ - s = devm_kzalloc(dev, sizeof(struct max310x_port), GFP_KERNEL); + s = devm_kzalloc(dev, sizeof(*s) + + sizeof(struct max310x_one) * devtype->nr, GFP_KERNEL); if (!s) { dev_err(dev, "Error allocating port structure\n"); return -ENOMEM; } - dev_set_drvdata(dev, s); - - if (!pdata) { - dev_warn(dev, "No platform data supplied, using defaults\n"); - pdata = &generic_plat_data; - } - s->pdata = pdata; - - /* Individual chip settings */ - switch (chiptype) { - case MAX310X_TYPE_MAX3107: - s->name = "MAX3107"; - s->nr_gpio = 4; - s->uart.nr = 1; - s->regcfg.max_register = 0x1f; - break; - case MAX310X_TYPE_MAX3108: - s->name = "MAX3108"; - s->nr_gpio = 4; - s->uart.nr = 1; - s->regcfg.max_register = 0x1e; - break; - default: - dev_err(dev, "Unsupported chip type %i\n", chiptype); - return -ENOTSUPP; - } /* Check input frequency */ if ((pdata->driver_flags & MAX310X_EXT_CLK) && @@ -1055,13 +1031,11 @@ static int max310x_probe(struct spi_device *spi) ((pdata->frequency < 1000000) || (pdata->frequency > 4000000))) goto err_freq; - mutex_init(&s->max310x_mutex); + s->pdata = pdata; + s->devtype = devtype; + dev_set_drvdata(dev, s); - /* Setup SPI bus */ - spi->mode = SPI_MODE_0; - spi->bits_per_word = 8; - spi->max_speed_hz = 26000000; - spi_setup(spi); + mutex_init(&s->mutex); /* Setup regmap */ s->regcfg.reg_bits = 8; @@ -1069,109 +1043,100 @@ static int max310x_probe(struct spi_device *spi) s->regcfg.read_flag_mask = 0x00; s->regcfg.write_flag_mask = 0x80; s->regcfg.cache_type = REGCACHE_RBTREE; - s->regcfg.writeable_reg = max3107_8_reg_writeable; + s->regcfg.writeable_reg = max310x_reg_writeable; s->regcfg.volatile_reg = max310x_reg_volatile; s->regcfg.precious_reg = max310x_reg_precious; - s->regmap = devm_regmap_init_spi(spi, &s->regcfg); + s->regcfg.max_register = devtype->nr * 0x20 - 1; + + if (IS_ENABLED(CONFIG_SPI_MASTER) && is_spi) { + struct spi_device *spi = to_spi_device(dev); + + s->regmap = devm_regmap_init_spi(spi, &s->regcfg); + } else + return -ENOTSUPP; + if (IS_ERR(s->regmap)) { - ret = PTR_ERR(s->regmap); dev_err(dev, "Failed to initialize register map\n"); - goto err_out; - } - - /* Reset chip & check SPI function */ - ret = regmap_write(s->regmap, MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT); - if (ret) { - dev_err(dev, "SPI transfer failed\n"); - goto err_out; - } - /* Clear chip reset */ - regmap_write(s->regmap, MAX310X_MODE2_REG, 0); - - switch (chiptype) { - case MAX310X_TYPE_MAX3107: - /* Check REV ID to ensure we are talking to what we expect */ - regmap_read(s->regmap, MAX3107_REVID_REG, &val); - if (((val & MAX3107_REV_MASK) != MAX3107_REV_ID)) { - dev_err(dev, "%s ID 0x%02x does not match\n", - s->name, val); - ret = -ENODEV; - goto err_out; - } - break; - case MAX310X_TYPE_MAX3108: - /* MAX3108 have not REV ID register, we just check default value - * from clocksource register to make sure everything works. - */ - regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); - if (val != (MAX310X_CLKSRC_EXTCLK_BIT | - MAX310X_CLKSRC_PLLBYP_BIT)) { - dev_err(dev, "%s not present\n", s->name); - ret = -ENODEV; - goto err_out; - } - break; + return PTR_ERR(s->regmap); } /* Board specific configure */ - if (pdata->init) - pdata->init(); - if (pdata->suspend) - pdata->suspend(0); - - /* Calculate referecne clock */ - s->uartclk = max310x_set_ref_clk(s); - - /* Disable all interrupts */ - regmap_write(s->regmap, MAX310X_IRQEN_REG, 0); - - /* Setup MODE1 register */ - val = MAX310X_MODE1_IRQSEL_BIT; /* Enable IRQ pin */ - if (pdata->driver_flags & MAX310X_AUTOSLEEP) - val = MAX310X_MODE1_AUTOSLEEP_BIT; - regmap_write(s->regmap, MAX310X_MODE1_REG, val); - - /* Setup interrupt */ - ret = devm_request_threaded_irq(dev, spi->irq, NULL, max310x_ist, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(dev), s); - if (ret) { - dev_err(dev, "Unable to reguest IRQ %i\n", spi->irq); - goto err_out; + if (s->pdata->init) + s->pdata->init(); + + /* Check device to ensure we are talking to what we expect */ + ret = devtype->detect(dev); + if (ret) + return ret; + + for (i = 0; i < devtype->nr; i++) { + unsigned int offs = i << 5; + + /* Reset port */ + regmap_write(s->regmap, MAX310X_MODE2_REG + offs, + MAX310X_MODE2_RST_BIT); + /* Clear port reset */ + regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0); + + /* Wait for port startup */ + do { + regmap_read(s->regmap, + MAX310X_BRGDIVLSB_REG + offs, &ret); + } while (ret != 0x01); + + regmap_update_bits(s->regmap, MAX310X_MODE1_REG + offs, + MAX310X_MODE1_AUTOSLEEP_BIT, + MAX310X_MODE1_AUTOSLEEP_BIT); } + uartclk = max310x_set_ref_clk(s); + dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); + /* Register UART driver */ s->uart.owner = THIS_MODULE; - s->uart.driver_name = dev_name(dev); s->uart.dev_name = "ttyMAX"; s->uart.major = MAX310X_MAJOR; s->uart.minor = MAX310X_MINOR; + s->uart.nr = devtype->nr; ret = uart_register_driver(&s->uart); if (ret) { dev_err(dev, "Registering UART driver failed\n"); - goto err_out; + return ret; } - /* Initialize workqueue for start TX */ - s->wq = create_freezable_workqueue(dev_name(dev)); - INIT_WORK(&s->tx_work, max310x_wq_proc); - - /* Initialize UART port data */ - s->port.line = 0; - s->port.dev = dev; - s->port.irq = spi->irq; - s->port.type = PORT_MAX310X; - s->port.fifosize = MAX310X_FIFO_SIZE; - s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; - s->port.iotype = UPIO_PORT; - s->port.membase = (void __iomem *)0xffffffff; /* Bogus value */ - s->port.uartclk = s->uartclk; - s->port.ops = &max310x_ops; - uart_add_one_port(&s->uart, &s->port); + for (i = 0; i < devtype->nr; i++) { + /* Initialize port data */ + s->p[i].port.line = i; + s->p[i].port.dev = dev; + s->p[i].port.irq = irq; + s->p[i].port.type = PORT_MAX310X; + s->p[i].port.fifosize = MAX310X_FIFO_SIZE; + s->p[i].port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE | + UPF_LOW_LATENCY; + s->p[i].port.iotype = UPIO_PORT; + s->p[i].port.iobase = i * 0x20; + s->p[i].port.membase = (void __iomem *)~0; + s->p[i].port.uartclk = uartclk; + s->p[i].port.ops = &max310x_ops; + /* Disable all interrupts */ + max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0); + /* Clear IRQ status register */ + max310x_port_read(&s->p[i].port, MAX310X_IRQSTS_REG); + /* Enable IRQ pin */ + max310x_port_update(&s->p[i].port, MAX310X_MODE1_REG, + MAX310X_MODE1_IRQSEL_BIT, + MAX310X_MODE1_IRQSEL_BIT); + /* Initialize queue for start TX */ + INIT_WORK(&s->p[i].tx_work, max310x_wq_proc); + /* Register port */ + uart_add_one_port(&s->uart, &s->p[i].port); + /* Go to suspend mode */ + devtype->power(&s->p[i].port, 0); + } #ifdef CONFIG_GPIOLIB /* Setup GPIO cotroller */ - if (pdata->gpio_base) { + if (s->pdata->gpio_base) { s->gpio.owner = THIS_MODULE; s->gpio.dev = dev; s->gpio.label = dev_name(dev); @@ -1179,86 +1144,105 @@ static int max310x_probe(struct spi_device *spi) s->gpio.get = max310x_gpio_get; s->gpio.direction_output= max310x_gpio_direction_output; s->gpio.set = max310x_gpio_set; - s->gpio.base = pdata->gpio_base; - s->gpio.ngpio = s->nr_gpio; + s->gpio.base = s->pdata->gpio_base; + s->gpio.ngpio = devtype->nr * 4; s->gpio.can_sleep = 1; - if (gpiochip_add(&s->gpio)) { - /* Indicate that we should not call gpiochip_remove */ - s->gpio.base = 0; - } + if (!gpiochip_add(&s->gpio)) + s->gpio_used = 1; } else dev_info(dev, "GPIO support not enabled\n"); #endif - /* Go to suspend mode */ - if (pdata->suspend) - pdata->suspend(1); + /* Setup interrupt */ + ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), s); + if (ret) { + dev_err(dev, "Unable to reguest IRQ %i\n", irq); +#ifdef CONFIG_GPIOLIB + if (s->gpio_used) + WARN_ON(gpiochip_remove(&s->gpio)); +#endif + } - return 0; + return ret; err_freq: dev_err(dev, "Frequency parameter incorrect\n"); - ret = -EINVAL; - -err_out: - dev_set_drvdata(dev, NULL); - - return ret; + return -EINVAL; } -static int max310x_remove(struct spi_device *spi) +static int max310x_remove(struct device *dev) { - struct device *dev = &spi->dev; struct max310x_port *s = dev_get_drvdata(dev); - int ret = 0; - - dev_dbg(dev, "Removing port\n"); - - devm_free_irq(dev, s->port.irq, s); + int i, ret = 0; - destroy_workqueue(s->wq); - - uart_remove_one_port(&s->uart, &s->port); + for (i = 0; i < s->uart.nr; i++) { + cancel_work_sync(&s->p[i].tx_work); + uart_remove_one_port(&s->uart, &s->p[i].port); + s->devtype->power(&s->p[i].port, 0); + } uart_unregister_driver(&s->uart); #ifdef CONFIG_GPIOLIB - if (s->pdata->gpio_base) { + if (s->gpio_used) ret = gpiochip_remove(&s->gpio); - if (ret) - dev_err(dev, "Failed to remove gpio chip: %d\n", ret); - } #endif - dev_set_drvdata(dev, NULL); - - if (s->pdata->suspend) - s->pdata->suspend(1); if (s->pdata->exit) s->pdata->exit(); return ret; } +#ifdef CONFIG_SPI_MASTER +static int max310x_spi_probe(struct spi_device *spi) +{ + struct max310x_devtype *devtype = + (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; + int ret; + + /* Setup SPI bus */ + spi->bits_per_word = 8; + spi->mode = spi->mode ? : SPI_MODE_0; + spi->max_speed_hz = spi->max_speed_hz ? : 26000000; + ret = spi_setup(spi); + if (ret) { + dev_err(&spi->dev, "SPI setup failed\n"); + return ret; + } + + return max310x_probe(&spi->dev, 1, devtype, spi->irq); +} + +static int max310x_spi_remove(struct spi_device *spi) +{ + return max310x_remove(&spi->dev); +} + +static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); + static const struct spi_device_id max310x_id_table[] = { - { "max3107", MAX310X_TYPE_MAX3107 }, - { "max3108", MAX310X_TYPE_MAX3108 }, + { "max3107", (kernel_ulong_t)&max3107_devtype, }, + { "max3108", (kernel_ulong_t)&max3108_devtype, }, { } }; MODULE_DEVICE_TABLE(spi, max310x_id_table); -static struct spi_driver max310x_driver = { +static struct spi_driver max310x_uart_driver = { .driver = { - .name = "max310x", + .name = MAX310X_NAME, .owner = THIS_MODULE, - .pm = MAX310X_PM_OPS, + .pm = &max310x_pm_ops, }, - .probe = max310x_probe, - .remove = max310x_remove, + .probe = max310x_spi_probe, + .remove = max310x_spi_remove, .id_table = max310x_id_table, }; -module_spi_driver(max310x_driver); +module_spi_driver(max310x_uart_driver); +#endif -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shiyan "); MODULE_DESCRIPTION("MAX310X serial driver"); diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h index 91648bf..1aec0b6 100644 --- a/include/linux/platform_data/max310x.h +++ b/include/linux/platform_data/max310x.h @@ -42,9 +42,8 @@ /* MAX310X platform data structure */ struct max310x_pdata { /* Flags global to driver */ - const u8 driver_flags:2; + const u8 driver_flags; #define MAX310X_EXT_CLK (0x00000001) /* External clock enable */ -#define MAX310X_AUTOSLEEP (0x00000002) /* Enable AutoSleep mode */ /* Flags global to UART port */ const u8 uart_flags[MAX310X_MAX_UARTS]; #define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */ @@ -60,8 +59,6 @@ struct max310x_pdata { void (*init)(void); /* Called before finish */ void (*exit)(void); - /* Suspend callback */ - void (*suspend)(int do_suspend); }; #endif -- cgit v0.10.2 From 21fc509f1194c2fa06eff4c72238210089c29453 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 29 Jun 2013 10:44:18 +0400 Subject: serial: max310x: Add MAX3109 support This patch adds support for MAX3109 (advanced dual universal asynchronous receiver-transmitter) into max310x driver. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 25772c1..8e1a9c5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -297,7 +297,7 @@ config SERIAL_MAX310X default n help This selects support for an advanced UART from Maxim (Dallas). - Supported ICs are MAX3107, MAX3108. + Supported ICs are MAX3107, MAX3108, MAX3109. Each IC contains 128 words each of receive and transmit FIFO that can be controlled through I2C or high-speed SPI. diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 4620289..a6c4642 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1,5 +1,5 @@ /* - * Maxim (Dallas) MAX3107/8 serial driver + * Maxim (Dallas) MAX3107/8/9 serial driver * * Copyright (C) 2012-2013 Alexander Shiyan * @@ -13,9 +13,6 @@ * (at your option) any later version. */ -/* TODO: MAX3109 support (Dual) */ -/* TODO: MAX14830 support (Quad) */ - #include #include #include @@ -269,6 +266,9 @@ /* MAX3107 specific */ #define MAX3107_REV_ID (0xa0) +/* MAX3109 specific */ +#define MAX3109_REV_ID (0xc0) + struct max310x_devtype { char name[9]; int nr; @@ -359,6 +359,25 @@ static int max3108_detect(struct device *dev) return 0; } +static int max3109_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_read(s->regmap, MAX310X_REVID_REG, &val); + if (ret) + return ret; + + if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + static void max310x_power(struct uart_port *port, int on) { max310x_port_update(port, MAX310X_MODE1_REG, @@ -382,6 +401,13 @@ static const struct max310x_devtype max3108_devtype = { .power = max310x_power, }; +static const struct max310x_devtype max3109_devtype = { + .name = "MAX3109", + .nr = 2, + .detect = max3109_detect, + .power = max310x_power, +}; + static bool max310x_reg_writeable(struct device *dev, unsigned int reg) { switch (reg & 0x1f) { @@ -1226,6 +1252,7 @@ static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); static const struct spi_device_id max310x_id_table[] = { { "max3107", (kernel_ulong_t)&max3107_devtype, }, { "max3108", (kernel_ulong_t)&max3108_devtype, }, + { "max3109", (kernel_ulong_t)&max3109_devtype, }, { } }; MODULE_DEVICE_TABLE(spi, max310x_id_table); diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h index 1aec0b6..4c128ed 100644 --- a/include/linux/platform_data/max310x.h +++ b/include/linux/platform_data/max310x.h @@ -1,5 +1,5 @@ /* - * Maxim (Dallas) MAX3107/8 serial driver + * Maxim (Dallas) MAX3107/8/9 serial driver * * Copyright (C) 2012 Alexander Shiyan * @@ -37,7 +37,7 @@ * }; */ -#define MAX310X_MAX_UARTS 1 +#define MAX310X_MAX_UARTS 2 /* MAX310X platform data structure */ struct max310x_pdata { -- cgit v0.10.2 From 003236d9ac4d02721867e47f7ad4371ab7f74689 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 29 Jun 2013 10:44:19 +0400 Subject: serial: max310x: Add MAX14830 support This patch adds support for MAX14830 (advanced quad universal asynchronous receiver-transmitter) into max310x driver. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 8e1a9c5..bc486de 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -297,7 +297,7 @@ config SERIAL_MAX310X default n help This selects support for an advanced UART from Maxim (Dallas). - Supported ICs are MAX3107, MAX3108, MAX3109. + Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830. Each IC contains 128 words each of receive and transmit FIFO that can be controlled through I2C or high-speed SPI. diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index a6c4642..4ab5b27 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1,5 +1,5 @@ /* - * Maxim (Dallas) MAX3107/8/9 serial driver + * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver * * Copyright (C) 2012-2013 Alexander Shiyan * @@ -269,6 +269,10 @@ /* MAX3109 specific */ #define MAX3109_REV_ID (0xc0) +/* MAX14830 specific */ +#define MAX14830_BRGCFG_CLKDIS_BIT (1 << 6) /* Clock Disable */ +#define MAX14830_REV_ID (0xb0) + struct max310x_devtype { char name[9]; int nr; @@ -387,6 +391,37 @@ static void max310x_power(struct uart_port *port, int on) msleep(50); } +static int max14830_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, + MAX310X_EXTREG_ENBL); + if (ret) + return ret; + + regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val); + regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL); + if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static void max14830_power(struct uart_port *port, int on) +{ + max310x_port_update(port, MAX310X_BRGCFG_REG, + MAX14830_BRGCFG_CLKDIS_BIT, + on ? 0 : MAX14830_BRGCFG_CLKDIS_BIT); + if (on) + msleep(50); +} + static const struct max310x_devtype max3107_devtype = { .name = "MAX3107", .nr = 1, @@ -408,6 +443,13 @@ static const struct max310x_devtype max3109_devtype = { .power = max310x_power, }; +static const struct max310x_devtype max14830_devtype = { + .name = "MAX14830", + .nr = 4, + .detect = max14830_detect, + .power = max14830_power, +}; + static bool max310x_reg_writeable(struct device *dev, unsigned int reg) { switch (reg & 0x1f) { @@ -1253,6 +1295,7 @@ static const struct spi_device_id max310x_id_table[] = { { "max3107", (kernel_ulong_t)&max3107_devtype, }, { "max3108", (kernel_ulong_t)&max3108_devtype, }, { "max3109", (kernel_ulong_t)&max3109_devtype, }, + { "max14830", (kernel_ulong_t)&max14830_devtype, }, { } }; MODULE_DEVICE_TABLE(spi, max310x_id_table); diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h index 4c128ed..dd11dcd 100644 --- a/include/linux/platform_data/max310x.h +++ b/include/linux/platform_data/max310x.h @@ -1,5 +1,5 @@ /* - * Maxim (Dallas) MAX3107/8/9 serial driver + * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver * * Copyright (C) 2012 Alexander Shiyan * @@ -37,7 +37,7 @@ * }; */ -#define MAX310X_MAX_UARTS 2 +#define MAX310X_MAX_UARTS 4 /* MAX310X platform data structure */ struct max310x_pdata { -- cgit v0.10.2 From 972ce08578e0db8663740faea420699c01729f41 Mon Sep 17 00:00:00 2001 From: Stefan Seyfried Date: Mon, 1 Jul 2013 09:14:21 +0200 Subject: 8250_pci: improve code comments and Kconfig help The recent regression about NetMos 9835 Multi-I/O boards indicates that comment pointing to the parport_serial driver could be helpful. Signed-off-by: Stefan Seyfried Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index c52948b..c626c4f 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -4797,6 +4797,12 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, + /* + * other NetMos 9835 devices are most likely handled by the + * parport_serial driver, check drivers/parport/parport_serial.c + * before adding them here. + */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index a1ba94d..f3b306e 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -116,6 +116,8 @@ config SERIAL_8250_PCI This builds standard PCI serial support. You may be able to disable this feature if you only need legacy serial support. Saves about 9K. + Note that serial ports on NetMos 9835 Multi-I/O cards are handled + by the parport_serial driver, enabled with CONFIG_PARPORT_SERIAL. config SERIAL_8250_HP300 tristate -- cgit v0.10.2 From f64ffda60e2c9b69ff2125e90cfca234b2eece2b Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Fri, 5 Jul 2013 18:25:59 +0300 Subject: OMAP2+: UART: enable tx wakeup bit for wer reg wer has TX wakeup bit available enable the same by populating the necessary tx wakeup flag for the applicable module ip blocks and use the same while configuaring wer reg. Also wer is not context restored, restore wer when context is lost. Cc: Paul Walmsley Cc: Felipe Balbi Cc: Kevin Hilman Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Govindraj.R Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index eacb0de..33c758e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -51,6 +51,11 @@ #define OMAP_UART_REV_52 0x0502 #define OMAP_UART_REV_63 0x0603 +#define OMAP_UART_TX_WAKEUP_EN BIT(7) + +/* Feature flags */ +#define OMAP_UART_WER_HAS_TX_WAKEUP BIT(0) + #define UART_ERRATA_i202_MDR1_ACCESS BIT(0) #define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) @@ -136,6 +141,7 @@ struct uart_omap_port { unsigned char dlh; unsigned char mdr1; unsigned char scr; + unsigned char wer; int use_dma; /* @@ -150,6 +156,7 @@ struct uart_omap_port { int context_loss_cnt; u32 errata; u8 wakeups_enabled; + u32 features; int DTR_gpio; int DTR_inverted; @@ -681,7 +688,11 @@ static int serial_omap_startup(struct uart_port *port) serial_out(up, UART_IER, up->ier); /* Enable module level wake up */ - serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); + up->wer = OMAP_UART_WER_MOD_WKUP; + if (up->features & OMAP_UART_WER_HAS_TX_WAKEUP) + up->wer |= OMAP_UART_TX_WAKEUP_EN; + + serial_out(up, UART_OMAP_WER, up->wer); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); @@ -1371,9 +1382,11 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up) case OMAP_UART_REV_52: up->errata |= (UART_ERRATA_i202_MDR1_ACCESS | UART_ERRATA_i291_DMA_FORCEIDLE); + up->features |= OMAP_UART_WER_HAS_TX_WAKEUP; break; case OMAP_UART_REV_63: up->errata |= UART_ERRATA_i202_MDR1_ACCESS; + up->features |= OMAP_UART_WER_HAS_TX_WAKEUP; break; default: break; @@ -1600,6 +1613,7 @@ static void serial_omap_restore_context(struct uart_omap_port *up) serial_omap_mdr1_errataset(up, up->mdr1); else serial_out(up, UART_OMAP_MDR1, up->mdr1); + serial_out(up, UART_OMAP_WER, up->wer); } static int serial_omap_runtime_suspend(struct device *dev) -- cgit v0.10.2 From c4415084218c68c5ee2fc583431e89a78d896b19 Mon Sep 17 00:00:00 2001 From: Dmitry Fink Date: Mon, 8 Jul 2013 13:04:44 +0300 Subject: OMAP: UART: Keep the TX fifo full when possible Current logic results in interrupt storm since the fifo is constantly below the threshold level. Change the logic to fill all the available spaces in the fifo as long as we have data to minimize the possibilty of underflow and elimiate excessive interrupts. Signed-off-by: Dmitry Fink Signed-off-by: Alexander Savchenko Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 33c758e..9271a1d 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -315,7 +315,8 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) serial_omap_stop_tx(&up->port); return; } - count = up->port.fifosize / 4; + count = up->port.fifosize - + (serial_in(up, UART_OMAP_TXFIFO_LVL) & 0xFF); do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index e632260..97c26be 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -366,6 +366,7 @@ #define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ #define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ +#define UART_OMAP_TXFIFO_LVL 0x1A /* TX FIFO fullness */ /* * These are definitions for the Exar XR17V35X and XR17(C|D)15X -- cgit v0.10.2 From 76bac1987ca181d54f8c9456d20997cb1020af2d Mon Sep 17 00:00:00 2001 From: Ruchika Kharwar Date: Mon, 8 Jul 2013 10:28:57 +0300 Subject: OMAP: UART: Fix the revision register read. The revision register is a 32 bit register. The serial_in() function reads only the lower 16 bits of the register. This leads to an incorrect computation of the Module revision. Signed-off-by: Ruchika Kharwar [oleksandr.savchenko@ti.com: add some whitespaces] Signed-off-by: Alexander Savchenko Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 9271a1d..9b6fc54 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1344,7 +1344,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up) u32 mvr, scheme; u16 revision, major, minor; - mvr = serial_in(up, UART_OMAP_MVER); + mvr = readl(up->port.membase + (UART_OMAP_MVER << up->port.regshift)); /* Check revision register scheme */ scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT; -- cgit v0.10.2 From a0a490f9df2bf7e077054c78221c6b5301681de6 Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Mon, 8 Jul 2013 10:25:43 +0300 Subject: serial: omap: Initialize platform_data Otherwise serial driver would crash accessing platform_data that was not initialized in functions like: serial_omap_pm(...) ... if (!state && pdata->enable_wakeup) ^^^^^^^ ... Signed-off-by: Vikram Pandita Signed-off-by: Alexander Savchenko Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 9b6fc54..72bb690 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1414,8 +1414,10 @@ static int serial_omap_probe(struct platform_device *pdev) struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; int ret; - if (pdev->dev.of_node) + if (pdev->dev.of_node) { omap_up_info = of_get_uart_port_info(&pdev->dev); + pdev->dev.platform_data = omap_up_info; + } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { -- cgit v0.10.2 From 908fd7e566b4c12e36e4487d2d5946de5e5ea30f Mon Sep 17 00:00:00 2001 From: Ruchika Kharwar Date: Wed, 17 Jul 2013 16:29:13 +0300 Subject: serial: omap: Fix IRQ handling return value Ensure the Interrupt handling routine return IRQ_HANDLED vs IRQ_NONE. Signed-off-by: Ruchika Kharwar Signed-off-by: Alexander Savchenko Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 72bb690..b080214 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -485,7 +485,6 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) struct uart_omap_port *up = dev_id; unsigned int iir, lsr; unsigned int type; - irqreturn_t ret = IRQ_NONE; int max_count = 256; spin_lock(&up->port.lock); @@ -496,7 +495,6 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) if (iir & UART_IIR_NO_INT) break; - ret = IRQ_HANDLED; lsr = serial_in(up, UART_LSR); /* extract IRQ type from IIR register */ @@ -535,7 +533,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) pm_runtime_put_autosuspend(up->dev); up->port_activity = jiffies; - return ret; + return IRQ_HANDLED; } static unsigned int serial_omap_tx_empty(struct uart_port *port) -- cgit v0.10.2 From bc764b8fdb4346cb21f624e08231267d0ea9578b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 8 Jul 2013 15:53:38 +0800 Subject: serial: fsl_lpuart: restore UARTCR2 after watermark setup is done Function lpuart_setup_watermark() clears some bits in register UARTCR2 before writing FIFO configuration registers as required by hardware. But it should restore UARTCR2 after that. Otherwise, we end up changing UARTCR2 register when setting up watermark, and that is not really desirable. At least, when low-level debug and earlyprint is enabled, serial console is broken due to it. Fix the problem by restoring UARTCR2 register at the end of function lpuart_setup_watermark(). Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 263cfaa..7bc17f2 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -342,8 +342,10 @@ static void lpuart_break_ctl(struct uart_port *port, int break_state) static void lpuart_setup_watermark(struct lpuart_port *sport) { unsigned char val, cr2; + unsigned char cr2_saved; cr2 = readb(sport->port.membase + UARTCR2); + cr2_saved = cr2; cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE | UARTCR2_RIE | UARTCR2_RE); writeb(cr2, sport->port.membase + UARTCR2); @@ -366,6 +368,9 @@ static void lpuart_setup_watermark(struct lpuart_port *sport) writeb(2, sport->port.membase + UARTTWFIFO); writeb(1, sport->port.membase + UARTRWFIFO); + + /* Restore cr2 */ + writeb(cr2_saved, sport->port.membase + UARTCR2); } static int lpuart_startup(struct uart_port *port) -- cgit v0.10.2 From 39c34b09f2fdb56c94891d5dd7ed4341d845cde5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 22 Jul 2013 09:12:36 +0800 Subject: serial: fsl_lpuart: Return proper error on lpuart_serial_init error path Signed-off-by: Axel Lin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 7bc17f2..8978dc9 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -863,7 +863,7 @@ static int __init lpuart_serial_init(void) if (ret) uart_unregister_driver(&lpuart_reg); - return 0; + return ret; } static void __exit lpuart_serial_exit(void) -- cgit v0.10.2 From 3026d14a98d50c78e74d072cb05340a0f86b3938 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 22 Jul 2013 15:31:15 +0530 Subject: serial: omap: enable PM runtime only when its fully configured If earlyprintk is enabled and current UART is console port the platform code can mark it as RPM_ACTIVE to sync real IP state with PM Runtime and avoid resuming of already active device, but now, driver initialization will be performed in the wrong way: pm_runtime_enable(&pdev->dev); <-- PM runtime alowed (device state RPM_ACTIVE) if (omap_up_info->autosuspend_timeout == 0) omap_up_info->autosuspend_timeout = -1; device_init_wakeup(up->dev, true); pm_runtime_use_autosuspend(&pdev->dev); <-- update_autosuspend() will be called and it will disable device (device state RPM_SUSPENDED) pm_runtime_set_autosuspend_delay(&pdev->dev, omap_up_info->autosuspend_timeout); <-- update_autosuspend() will be called which will re-enable device (device state RPM_ACTIVE), because autosuspend_timeout < 0 pm_runtime_irq_safe(&pdev->dev); pm_runtime_get_sync(&pdev->dev); <-- will do nothing Such behavior isn't expected by OMAP serial drivers and causes unpredictable calls of serial_omap_runtime_suspend() and serial_omap_runtime_resume(). Hence, fix it by allowing PM runtime only after all its parameters are configured. CC: Tony Lindgren CC: Rajendra Nayak CC: Felipe Balbi CC: Kevin Hilman Tested-by: Mark Jackson Signed-off-by: Grygorii Strashko Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index b080214..c77bf0c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1506,7 +1506,6 @@ static int serial_omap_probe(struct platform_device *pdev) INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); platform_set_drvdata(pdev, up); - pm_runtime_enable(&pdev->dev); if (omap_up_info->autosuspend_timeout == 0) omap_up_info->autosuspend_timeout = -1; device_init_wakeup(up->dev, true); @@ -1515,6 +1514,8 @@ static int serial_omap_probe(struct platform_device *pdev) omap_up_info->autosuspend_timeout); pm_runtime_irq_safe(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); omap_serial_fill_features_erratas(up); -- cgit v0.10.2 From 7d12b9769f39bec1630c6a1947e8615ce26c9a52 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 12 Jul 2013 13:07:39 -0700 Subject: serial: report base_baud after initialization Some serial ports will not use the standard base baud rate. Report this after initialization so it might be discovered and used for early console configuration. Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 28cdd28..0f02351 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2095,12 +2095,12 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) break; } - printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", + printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n", port->dev ? dev_name(port->dev) : "", port->dev ? ": " : "", drv->dev_name, drv->tty_driver->name_base + port->line, - address, port->irq, uart_type(port)); + address, port->irq, port->uartclk / 16, uart_type(port)); } static void -- cgit v0.10.2 From 4e3234897fbc4c83286f3cd3105d38b26634812d Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Fri, 12 Jul 2013 17:58:05 -0700 Subject: pch_uart: Use DMI interface for board detection Use the DMI interface rather than manually matching DMI strings. Signed-off-by: Darren Hart Cc: Michael Brunner Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 572d481..271cc73 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -373,35 +373,62 @@ static const struct file_operations port_regs_ops = { }; #endif /* CONFIG_DEBUG_FS */ +static struct dmi_system_id __initdata pch_uart_dmi_table[] = { + { + .ident = "CM-iTC", + { + DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"), + }, + (void *)CMITC_UARTCLK, + }, + { + .ident = "FRI2", + { + DMI_MATCH(DMI_BIOS_VERSION, "FRI2"), + }, + (void *)FRI2_64_UARTCLK, + }, + { + .ident = "Fish River Island II", + { + DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"), + }, + (void *)FRI2_48_UARTCLK, + }, + { + .ident = "COMe-mTT", + { + DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"), + }, + (void *)NTC1_UARTCLK, + }, + { + .ident = "nanoETXexpress-TT", + { + DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"), + }, + (void *)NTC1_UARTCLK, + }, + { + .ident = "MinnowBoard", + { + DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"), + }, + (void *)MINNOW_UARTCLK, + }, +}; + /* Return UART clock, checking for board specific clocks. */ static int pch_uart_get_uartclk(void) { - const char *cmp; + const struct dmi_system_id *d; if (user_uartclk) return user_uartclk; - cmp = dmi_get_system_info(DMI_BOARD_NAME); - if (cmp && strstr(cmp, "CM-iTC")) - return CMITC_UARTCLK; - - cmp = dmi_get_system_info(DMI_BIOS_VERSION); - if (cmp && strnstr(cmp, "FRI2", 4)) - return FRI2_64_UARTCLK; - - cmp = dmi_get_system_info(DMI_PRODUCT_NAME); - if (cmp && strstr(cmp, "Fish River Island II")) - return FRI2_48_UARTCLK; - - /* Kontron COMe-mTT10 (nanoETXexpress-TT) */ - cmp = dmi_get_system_info(DMI_BOARD_NAME); - if (cmp && (strstr(cmp, "COMe-mTT") || - strstr(cmp, "nanoETXexpress-TT"))) - return NTC1_UARTCLK; - - cmp = dmi_get_system_info(DMI_BOARD_NAME); - if (cmp && strstr(cmp, "MinnowBoard")) - return MINNOW_UARTCLK; + d = dmi_first_match(pch_uart_dmi_table); + if (d) + return (int)d->driver_data; return DEFAULT_UARTCLK; } -- cgit v0.10.2 From 37e1ceb1796279d8a7b0dfaeff8a829d1dd1b2f3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 15 Jul 2013 13:36:03 +0800 Subject: serial: bfin_uart: Remove redundant testing for ifdef CONFIG_SERIAL_BFIN_MODULE No idea why we have redundant testing for ifdef CONFIG_SERIAL_BFIN_MODULE, check it once is enough. Signed-off-by: Axel Lin Acked-by: Sonic Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index 26a3be7..72031d7 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -41,10 +41,6 @@ # undef CONFIG_EARLY_PRINTK #endif -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - /* UART name and device definitions */ #define BFIN_SERIAL_DEV_NAME "ttyBF" #define BFIN_SERIAL_MAJOR 204 -- cgit v0.10.2 From 195be84aaae50af84c833d91c81af015091ec86d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 17 Jul 2013 13:34:09 +0800 Subject: msm_serial: add missing iounmap() on error in msm_request_port() Add the missing iounmap() before return from msm_request_port() in the error handling case. Signed-off-by: Wei Yongjun Reviewed-by: Ivan T. Ivanov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 2c6cfb3..0b38b28 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -637,7 +637,7 @@ static int msm_request_port(struct uart_port *port) if (!request_mem_region(gsbi_resource->start, size, "msm_serial")) { ret = -EBUSY; - goto fail_release_port; + goto fail_release_port_membase; } msm_port->gsbi_base = ioremap(gsbi_resource->start, size); @@ -651,6 +651,8 @@ static int msm_request_port(struct uart_port *port) fail_release_gsbi: release_mem_region(gsbi_resource->start, size); +fail_release_port_membase: + iounmap(port->membase); fail_release_port: release_mem_region(port->mapbase, size); return ret; -- cgit v0.10.2 From 2f2a0c70ce70572b517b7d2b5c68b7c9819fe3ff Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 17 Jul 2013 08:48:41 +0200 Subject: serial/efm32-uart: use COMPILE_TEST symbol to extend compile test coverage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver fails to build on x86 because writel_relaxed isn't available there. That function exists on arm, arm64, avr32, hexagon, mips and sh, but adding all these is overkill so stick to arm only. Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index bc486de..6e73781 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1424,8 +1424,8 @@ config SERIAL_AR933X_NR_UARTS to support. config SERIAL_EFM32_UART - tristate "EFM32 UART/USART port." - depends on ARCH_EFM32 + tristate "EFM32 UART/USART port" + depends on ARM && (ARCH_EFM32 || COMPILE_TEST) select SERIAL_CORE help This driver support the USART and UART ports on -- cgit v0.10.2 From 75e66aa65ed2224e3bb21b6c44555ff938c9046c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 18 Jul 2013 14:51:04 +0200 Subject: serial/efm32-uart: make of_device_id array const MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index e029907..868dbfb 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -788,7 +788,7 @@ static int efm32_uart_remove(struct platform_device *pdev) return 0; } -static struct of_device_id efm32_uart_dt_ids[] = { +static const struct of_device_id efm32_uart_dt_ids[] = { { .compatible = "efm32,uart", }, { -- cgit v0.10.2 From c4b058560762ec7ffe159b668fc47a8b7e271949 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 15 Jul 2013 12:39:23 +0100 Subject: serial:st-asc: Add ST ASC driver. This patch adds support to ASC (asynchronous serial controller) driver, which is basically a standard serial driver. This IP is common across all the ST parts for settop box platforms. ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality. It support all industry standard baud rates. Signed-off-by: Srinivas Kandagatla CC: Stephen Gallimore CC: Stuart Menefy CC: Arnd Bergmann CC: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/tty/serial/st-asc.txt b/Documentation/devicetree/bindings/tty/serial/st-asc.txt new file mode 100644 index 0000000..75d877f --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/st-asc.txt @@ -0,0 +1,18 @@ +*st-asc(Serial Port) + +Required properties: +- compatible : Should be "st,asc". +- reg, reg-names, interrupts, interrupt-names : Standard way to define device + resources with names. look in + Documentation/devicetree/bindings/resource-names.txt + +Optional properties: +- st,hw-flow-ctrl bool flag to enable hardware flow control. +- st,force-m1 bool flat to force asc to be in Mode-1 recommeded + for high bit rates (above 19.2K) +Example: +serial@fe440000{ + compatible = "st,asc"; + reg = <0xfe440000 0x2c>; + interrupts = <0 209 0>; +}; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 6e73781..bdf5c0e 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1497,6 +1497,22 @@ config SERIAL_FSL_LPUART_CONSOLE If you have enabled the lpuart serial port on the Freescale SoCs, you can make it the console by answering Y to this option. +config SERIAL_ST_ASC + tristate "ST ASC serial port support" + select SERIAL_CORE + help + This driver is for the on-chip Asychronous Serial Controller on + STMicroelectronics STi SoCs. + ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality. + It support all industry standard baud rates. + + If unsure, say N. + +config SERIAL_ST_ASC_CONSOLE + bool "Support for console on ST ASC" + depends on SERIAL_ST_ASC=y + select SERIAL_CORE_CONSOLE + endmenu endif # TTY diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index cf650f0..47b679c 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o +obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c new file mode 100644 index 0000000..1838798 --- /dev/null +++ b/drivers/tty/serial/st-asc.c @@ -0,0 +1,937 @@ +/* + * st-asc.c: ST Asynchronous serial controller (ASC) driver + * + * Copyright (C) 2003-2013 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#if defined(CONFIG_SERIAL_ST_ASC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "st-asc" +#define ASC_SERIAL_NAME "ttyAS" +#define ASC_FIFO_SIZE 16 +#define ASC_MAX_PORTS 8 + +struct asc_port { + struct uart_port port; + struct clk *clk; + unsigned int hw_flow_control:1; + unsigned int force_m1:1; +}; + +static struct asc_port asc_ports[ASC_MAX_PORTS]; +static struct uart_driver asc_uart_driver; + +/*---- UART Register definitions ------------------------------*/ + +/* Register offsets */ + +#define ASC_BAUDRATE 0x00 +#define ASC_TXBUF 0x04 +#define ASC_RXBUF 0x08 +#define ASC_CTL 0x0C +#define ASC_INTEN 0x10 +#define ASC_STA 0x14 +#define ASC_GUARDTIME 0x18 +#define ASC_TIMEOUT 0x1C +#define ASC_TXRESET 0x20 +#define ASC_RXRESET 0x24 +#define ASC_RETRIES 0x28 + +/* ASC_RXBUF */ +#define ASC_RXBUF_PE 0x100 +#define ASC_RXBUF_FE 0x200 +/** + * Some of status comes from higher bits of the character and some come from + * the status register. Combining both of them in to single status using dummy + * bits. + */ +#define ASC_RXBUF_DUMMY_RX 0x10000 +#define ASC_RXBUF_DUMMY_BE 0x20000 +#define ASC_RXBUF_DUMMY_OE 0x40000 + +/* ASC_CTL */ + +#define ASC_CTL_MODE_MSK 0x0007 +#define ASC_CTL_MODE_8BIT 0x0001 +#define ASC_CTL_MODE_7BIT_PAR 0x0003 +#define ASC_CTL_MODE_9BIT 0x0004 +#define ASC_CTL_MODE_8BIT_WKUP 0x0005 +#define ASC_CTL_MODE_8BIT_PAR 0x0007 +#define ASC_CTL_STOP_MSK 0x0018 +#define ASC_CTL_STOP_HALFBIT 0x0000 +#define ASC_CTL_STOP_1BIT 0x0008 +#define ASC_CTL_STOP_1_HALFBIT 0x0010 +#define ASC_CTL_STOP_2BIT 0x0018 +#define ASC_CTL_PARITYODD 0x0020 +#define ASC_CTL_LOOPBACK 0x0040 +#define ASC_CTL_RUN 0x0080 +#define ASC_CTL_RXENABLE 0x0100 +#define ASC_CTL_SCENABLE 0x0200 +#define ASC_CTL_FIFOENABLE 0x0400 +#define ASC_CTL_CTSENABLE 0x0800 +#define ASC_CTL_BAUDMODE 0x1000 + +/* ASC_GUARDTIME */ + +#define ASC_GUARDTIME_MSK 0x00FF + +/* ASC_INTEN */ + +#define ASC_INTEN_RBE 0x0001 +#define ASC_INTEN_TE 0x0002 +#define ASC_INTEN_THE 0x0004 +#define ASC_INTEN_PE 0x0008 +#define ASC_INTEN_FE 0x0010 +#define ASC_INTEN_OE 0x0020 +#define ASC_INTEN_TNE 0x0040 +#define ASC_INTEN_TOI 0x0080 +#define ASC_INTEN_RHF 0x0100 + +/* ASC_RETRIES */ + +#define ASC_RETRIES_MSK 0x00FF + +/* ASC_RXBUF */ + +#define ASC_RXBUF_MSK 0x03FF + +/* ASC_STA */ + +#define ASC_STA_RBF 0x0001 +#define ASC_STA_TE 0x0002 +#define ASC_STA_THE 0x0004 +#define ASC_STA_PE 0x0008 +#define ASC_STA_FE 0x0010 +#define ASC_STA_OE 0x0020 +#define ASC_STA_TNE 0x0040 +#define ASC_STA_TOI 0x0080 +#define ASC_STA_RHF 0x0100 +#define ASC_STA_TF 0x0200 +#define ASC_STA_NKD 0x0400 + +/* ASC_TIMEOUT */ + +#define ASC_TIMEOUT_MSK 0x00FF + +/* ASC_TXBUF */ + +#define ASC_TXBUF_MSK 0x01FF + +/*---- Inline function definitions ---------------------------*/ + +static inline struct asc_port *to_asc_port(struct uart_port *port) +{ + return container_of(port, struct asc_port, port); +} + +static inline u32 asc_in(struct uart_port *port, u32 offset) +{ + return readl(port->membase + offset); +} + +static inline void asc_out(struct uart_port *port, u32 offset, u32 value) +{ + writel(value, port->membase + offset); +} + +/* + * Some simple utility functions to enable and disable interrupts. + * Note that these need to be called with interrupts disabled. + */ +static inline void asc_disable_tx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) & ~ASC_INTEN_THE; + asc_out(port, ASC_INTEN, intenable); + (void)asc_in(port, ASC_INTEN); /* Defeat bus write posting */ +} + +static inline void asc_enable_tx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) | ASC_INTEN_THE; + asc_out(port, ASC_INTEN, intenable); +} + +static inline void asc_disable_rx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) & ~ASC_INTEN_RBE; + asc_out(port, ASC_INTEN, intenable); + (void)asc_in(port, ASC_INTEN); /* Defeat bus write posting */ +} + +static inline void asc_enable_rx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) | ASC_INTEN_RBE; + asc_out(port, ASC_INTEN, intenable); +} + +static inline u32 asc_txfifo_is_empty(struct uart_port *port) +{ + return asc_in(port, ASC_STA) & ASC_STA_TE; +} + +static inline int asc_txfifo_is_full(struct uart_port *port) +{ + return asc_in(port, ASC_STA) & ASC_STA_TF; +} + +static inline const char *asc_port_name(struct uart_port *port) +{ + return to_platform_device(port->dev)->name; +} + +/*----------------------------------------------------------------------*/ + +/* + * This section contains code to support the use of the ASC as a + * generic serial port. + */ + +static inline unsigned asc_hw_txroom(struct uart_port *port) +{ + u32 status = asc_in(port, ASC_STA); + + if (status & ASC_STA_THE) + return port->fifosize / 2; + else if (!(status & ASC_STA_TF)) + return 1; + + return 0; +} + +/* + * Start transmitting chars. + * This is called from both interrupt and task level. + * Either way interrupts are disabled. + */ +static void asc_transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int txroom; + unsigned char c; + + txroom = asc_hw_txroom(port); + + if ((txroom != 0) && port->x_char) { + c = port->x_char; + port->x_char = 0; + asc_out(port, ASC_TXBUF, c); + port->icount.tx++; + txroom = asc_hw_txroom(port); + } + + if (uart_tx_stopped(port)) { + /* + * We should try and stop the hardware here, but I + * don't think the ASC has any way to do that. + */ + asc_disable_tx_interrupts(port); + return; + } + + if (uart_circ_empty(xmit)) { + asc_disable_tx_interrupts(port); + return; + } + + if (txroom == 0) + return; + + do { + c = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + asc_out(port, ASC_TXBUF, c); + port->icount.tx++; + txroom--; + } while ((txroom > 0) && (!uart_circ_empty(xmit))); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + asc_disable_tx_interrupts(port); +} + +static void asc_receive_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned long status; + unsigned long c = 0; + char flag; + + if (port->irq_wake) + pm_wakeup_event(tport->tty->dev, 0); + + while ((status = asc_in(port, ASC_STA)) & ASC_STA_RBF) { + c = asc_in(port, ASC_RXBUF) | ASC_RXBUF_DUMMY_RX; + flag = TTY_NORMAL; + port->icount.rx++; + + if ((c & (ASC_RXBUF_FE | ASC_RXBUF_PE)) || + status & ASC_STA_OE) { + + if (c & ASC_RXBUF_FE) { + if (c == ASC_RXBUF_FE) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + c |= ASC_RXBUF_DUMMY_BE; + } else { + port->icount.frame++; + } + } else if (c & ASC_RXBUF_PE) { + port->icount.parity++; + } + /* + * Reading any data from the RX FIFO clears the + * overflow error condition. + */ + if (status & ASC_STA_OE) { + port->icount.overrun++; + c |= ASC_RXBUF_DUMMY_OE; + } + + c &= port->read_status_mask; + + if (c & ASC_RXBUF_DUMMY_BE) + flag = TTY_BREAK; + else if (c & ASC_RXBUF_PE) + flag = TTY_PARITY; + else if (c & ASC_RXBUF_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + + uart_insert_char(port, c, ASC_RXBUF_DUMMY_OE, c & 0xff, flag); + } + + /* Tell the rest of the system the news. New characters! */ + tty_flip_buffer_push(tport); +} + +static irqreturn_t asc_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + u32 status; + + spin_lock(&port->lock); + + status = asc_in(port, ASC_STA); + + if (status & ASC_STA_RBF) { + /* Receive FIFO not empty */ + asc_receive_chars(port); + } + + if ((status & ASC_STA_THE) && + (asc_in(port, ASC_INTEN) & ASC_INTEN_THE)) { + /* Transmitter FIFO at least half empty */ + asc_transmit_chars(port); + } + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +/*----------------------------------------------------------------------*/ + +/* + * UART Functions + */ + +static unsigned int asc_tx_empty(struct uart_port *port) +{ + return asc_txfifo_is_empty(port) ? TIOCSER_TEMT : 0; +} + +static void asc_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* + * This routine is used for seting signals of: DTR, DCD, CTS/RTS + * We use ASC's hardware for CTS/RTS, so don't need any for that. + * Some boards have DTR and DCD implemented using PIO pins, + * code to do this should be hooked in here. + */ +} + +static unsigned int asc_get_mctrl(struct uart_port *port) +{ + /* + * This routine is used for geting signals of: DTR, DCD, DSR, RI, + * and CTS/RTS + */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* There are probably characters waiting to be transmitted. */ +static void asc_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (!uart_circ_empty(xmit)) + asc_enable_tx_interrupts(port); +} + +/* Transmit stop */ +static void asc_stop_tx(struct uart_port *port) +{ + asc_disable_tx_interrupts(port); +} + +/* Receive stop */ +static void asc_stop_rx(struct uart_port *port) +{ + asc_disable_rx_interrupts(port); +} + +/* Force modem status interrupts on */ +static void asc_enable_ms(struct uart_port *port) +{ + /* Nothing here yet .. */ +} + +/* Handle breaks - ignored by us */ +static void asc_break_ctl(struct uart_port *port, int break_state) +{ + /* Nothing here yet .. */ +} + +/* + * Enable port for reception. + */ +static int asc_startup(struct uart_port *port) +{ + if (request_irq(port->irq, asc_interrupt, IRQF_NO_SUSPEND, + asc_port_name(port), port)) { + dev_err(port->dev, "cannot allocate irq.\n"); + return -ENODEV; + } + + asc_transmit_chars(port); + asc_enable_rx_interrupts(port); + + return 0; +} + +static void asc_shutdown(struct uart_port *port) +{ + asc_disable_tx_interrupts(port); + asc_disable_rx_interrupts(port); + free_irq(port->irq, port); +} + +static void asc_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct asc_port *ascport = to_asc_port(port); + unsigned long flags = 0; + u32 ctl; + + switch (state) { + case UART_PM_STATE_ON: + clk_prepare_enable(ascport->clk); + break; + case UART_PM_STATE_OFF: + /* + * Disable the ASC baud rate generator, which is as close as + * we can come to turning it off. Note this is not called with + * the port spinlock held. + */ + spin_lock_irqsave(&port->lock, flags); + ctl = asc_in(port, ASC_CTL) & ~ASC_CTL_RUN; + asc_out(port, ASC_CTL, ctl); + spin_unlock_irqrestore(&port->lock, flags); + clk_disable_unprepare(ascport->clk); + break; + } +} + +static void asc_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct asc_port *ascport = to_asc_port(port); + unsigned int baud; + u32 ctrl_val; + tcflag_t cflag; + unsigned long flags; + + /* Update termios to reflect hardware capabilities */ + termios->c_cflag &= ~(CMSPAR | + (ascport->hw_flow_control ? 0 : CRTSCTS)); + + port->uartclk = clk_get_rate(ascport->clk); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + cflag = termios->c_cflag; + + spin_lock_irqsave(&port->lock, flags); + + /* read control register */ + ctrl_val = asc_in(port, ASC_CTL); + + /* stop serial port and reset value */ + asc_out(port, ASC_CTL, (ctrl_val & ~ASC_CTL_RUN)); + ctrl_val = ASC_CTL_RXENABLE | ASC_CTL_FIFOENABLE; + + /* reset fifo rx & tx */ + asc_out(port, ASC_TXRESET, 1); + asc_out(port, ASC_RXRESET, 1); + + /* set character length */ + if ((cflag & CSIZE) == CS7) { + ctrl_val |= ASC_CTL_MODE_7BIT_PAR; + } else { + ctrl_val |= (cflag & PARENB) ? ASC_CTL_MODE_8BIT_PAR : + ASC_CTL_MODE_8BIT; + } + + /* set stop bit */ + ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT; + + /* odd parity */ + if (cflag & PARODD) + ctrl_val |= ASC_CTL_PARITYODD; + + /* hardware flow control */ + if ((cflag & CRTSCTS)) + ctrl_val |= ASC_CTL_CTSENABLE; + + if ((baud < 19200) && !ascport->force_m1) { + asc_out(port, ASC_BAUDRATE, (port->uartclk / (16 * baud))); + } else { + /* + * MODE 1: recommended for high bit rates (above 19.2K) + * + * baudrate * 16 * 2^16 + * ASCBaudRate = ------------------------ + * inputclock + * + * However to keep the maths inside 32bits we divide top and + * bottom by 64. The +1 is to avoid a divide by zero if the + * input clock rate is something unexpected. + */ + u32 counter = (baud * 16384) / ((port->uartclk / 64) + 1); + asc_out(port, ASC_BAUDRATE, counter); + ctrl_val |= ASC_CTL_BAUDMODE; + } + + uart_update_timeout(port, cflag, baud); + + ascport->port.read_status_mask = ASC_RXBUF_DUMMY_OE; + if (termios->c_iflag & INPCK) + ascport->port.read_status_mask |= ASC_RXBUF_FE | ASC_RXBUF_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + ascport->port.read_status_mask |= ASC_RXBUF_DUMMY_BE; + + /* + * Characters to ignore + */ + ascport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + ascport->port.ignore_status_mask |= ASC_RXBUF_FE | ASC_RXBUF_PE; + if (termios->c_iflag & IGNBRK) { + ascport->port.ignore_status_mask |= ASC_RXBUF_DUMMY_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + ascport->port.ignore_status_mask |= ASC_RXBUF_DUMMY_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if (!(termios->c_cflag & CREAD)) + ascport->port.ignore_status_mask |= ASC_RXBUF_DUMMY_RX; + + /* Set the timeout */ + asc_out(port, ASC_TIMEOUT, 20); + + /* write final value and enable port */ + asc_out(port, ASC_CTL, (ctrl_val | ASC_CTL_RUN)); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *asc_type(struct uart_port *port) +{ + return (port->type == PORT_ASC) ? DRIVER_NAME : NULL; +} + +static void asc_release_port(struct uart_port *port) +{ +} + +static int asc_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Called when the port is opened, and UPF_BOOT_AUTOCONF flag is set + * Set type field if successful + */ +static void asc_config_port(struct uart_port *port, int flags) +{ + if ((flags & UART_CONFIG_TYPE)) + port->type = PORT_ASC; +} + +static int +asc_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* No user changeable parameters */ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context (i.e. kgdb). + */ + +static int asc_get_poll_char(struct uart_port *port) +{ + if (!(asc_in(port, ASC_STA) & ASC_STA_RBF)) + return NO_POLL_CHAR; + + return asc_in(port, ASC_RXBUF); +} + +static void asc_put_poll_char(struct uart_port *port, unsigned char c) +{ + while (asc_txfifo_is_full(port)) + cpu_relax(); + asc_out(port, ASC_TXBUF, c); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +/*---------------------------------------------------------------------*/ + +static struct uart_ops asc_uart_ops = { + .tx_empty = asc_tx_empty, + .set_mctrl = asc_set_mctrl, + .get_mctrl = asc_get_mctrl, + .start_tx = asc_start_tx, + .stop_tx = asc_stop_tx, + .stop_rx = asc_stop_rx, + .enable_ms = asc_enable_ms, + .break_ctl = asc_break_ctl, + .startup = asc_startup, + .shutdown = asc_shutdown, + .set_termios = asc_set_termios, + .type = asc_type, + .release_port = asc_release_port, + .request_port = asc_request_port, + .config_port = asc_config_port, + .verify_port = asc_verify_port, + .pm = asc_pm, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = asc_get_poll_char, + .poll_put_char = asc_put_poll_char, +#endif /* CONFIG_CONSOLE_POLL */ +}; + +static int asc_init_port(struct asc_port *ascport, + struct platform_device *pdev) +{ + struct uart_port *port = &ascport->port; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!res) { + dev_err(&pdev->dev, "Unable to get io resource\n"); + return -ENODEV; + } + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &asc_uart_ops; + port->fifosize = ASC_FIFO_SIZE; + port->dev = &pdev->dev; + port->mapbase = res->start; + port->irq = platform_get_irq(pdev, 0); + + port->membase = devm_request_and_ioremap(&pdev->dev, res); + if (!port->membase) { + dev_err(&pdev->dev, "Unable to request io memory\n"); + return -ENODEV; + } + + spin_lock_init(&port->lock); + + ascport->clk = devm_clk_get(&pdev->dev, NULL); + + if (WARN_ON(IS_ERR(ascport->clk))) + return -EINVAL; + /* ensure that clk rate is correct by enabling the clk */ + clk_prepare_enable(ascport->clk); + ascport->port.uartclk = clk_get_rate(ascport->clk); + WARN_ON(ascport->port.uartclk == 0); + clk_disable_unprepare(ascport->clk); + + return 0; +} + +static struct asc_port *asc_of_get_asc_port(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int id; + + if (!np) + return NULL; + + id = of_alias_get_id(np, ASC_SERIAL_NAME); + + if (id < 0) + id = 0; + + if (WARN_ON(id >= ASC_MAX_PORTS)) + return NULL; + + asc_ports[id].hw_flow_control = of_property_read_bool(np, + "st,hw-flow-control"); + asc_ports[id].force_m1 = of_property_read_bool(np, "st,force_m1"); + asc_ports[id].port.line = id; + return &asc_ports[id]; +} + +static struct of_device_id asc_match[] = { + { .compatible = "st,asc", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, asc_match); + +static int asc_serial_probe(struct platform_device *pdev) +{ + int ret; + struct asc_port *ascport; + + ascport = asc_of_get_asc_port(pdev); + if (!ascport) + return -ENODEV; + + ret = asc_init_port(ascport, pdev); + if (ret) + return ret; + + ret = uart_add_one_port(&asc_uart_driver, &ascport->port); + if (ret) + return ret; + + platform_set_drvdata(pdev, &ascport->port); + + return 0; +} + +static int asc_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + return uart_remove_one_port(&asc_uart_driver, port); +} + +#ifdef CONFIG_PM_SLEEP +static int asc_serial_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct uart_port *port = platform_get_drvdata(pdev); + + return uart_suspend_port(&asc_uart_driver, port); +} + +static int asc_serial_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct uart_port *port = platform_get_drvdata(pdev); + + return uart_resume_port(&asc_uart_driver, port); +} + +#endif /* CONFIG_PM_SLEEP */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_SERIAL_ST_ASC_CONSOLE +static void asc_console_putchar(struct uart_port *port, int ch) +{ + unsigned int timeout = 1000000; + + /* Wait for upto 1 second in case flow control is stopping us. */ + while (--timeout && asc_txfifo_is_full(port)) + udelay(1); + + asc_out(port, ASC_TXBUF, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ + +static void asc_console_write(struct console *co, const char *s, unsigned count) +{ + struct uart_port *port = &asc_ports[co->index].port; + unsigned long flags; + unsigned long timeout = 1000000; + int locked = 1; + u32 intenable; + + local_irq_save(flags); + if (port->sysrq) + locked = 0; /* asc_interrupt has already claimed the lock */ + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else + spin_lock(&port->lock); + + /* + * Disable interrupts so we don't get the IRQ line bouncing + * up and down while interrupts are disabled. + */ + intenable = asc_in(port, ASC_INTEN); + asc_out(port, ASC_INTEN, 0); + (void)asc_in(port, ASC_INTEN); /* Defeat bus write posting */ + + uart_console_write(port, s, count, asc_console_putchar); + + while (--timeout && !asc_txfifo_is_empty(port)) + udelay(1); + + asc_out(port, ASC_INTEN, intenable); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static int asc_console_setup(struct console *co, char *options) +{ + struct asc_port *ascport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= ASC_MAX_PORTS) + return -ENODEV; + + ascport = &asc_ports[co->index]; + + /* + * This driver does not support early console initialization + * (use ARM early printk support instead), so we only expect + * this to be called during the uart port registration when the + * driver gets probed and the port should be mapped at that point. + */ + BUG_ON(ascport->port.mapbase == 0 || ascport->port.membase == NULL); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&ascport->port, co, baud, parity, bits, flow); +} + +static struct console asc_console = { + .name = ASC_SERIAL_NAME, + .device = uart_console_device, + .write = asc_console_write, + .setup = asc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &asc_uart_driver, +}; + +#define ASC_SERIAL_CONSOLE (&asc_console) + +#else +#define ASC_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_ST_ASC_CONSOLE */ + +static struct uart_driver asc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = ASC_SERIAL_NAME, + .major = 0, + .minor = 0, + .nr = ASC_MAX_PORTS, + .cons = ASC_SERIAL_CONSOLE, +}; + +static const struct dev_pm_ops asc_serial_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(asc_serial_suspend, asc_serial_resume) +}; + +static struct platform_driver asc_serial_driver = { + .probe = asc_serial_probe, + .remove = asc_serial_remove, + .driver = { + .name = DRIVER_NAME, + .pm = &asc_serial_pm_ops, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(asc_match), + }, +}; + +static int __init asc_init(void) +{ + int ret; + static char banner[] __initdata = + KERN_INFO "STMicroelectronics ASC driver initialized\n"; + + printk(banner); + + ret = uart_register_driver(&asc_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&asc_serial_driver); + if (ret) + uart_unregister_driver(&asc_uart_driver); + + return ret; +} + +static void __exit asc_exit(void) +{ + platform_driver_unregister(&asc_serial_driver); + uart_unregister_driver(&asc_uart_driver); +} + +module_init(asc_init); +module_exit(asc_exit); + +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("STMicroelectronics (R&D) Limited"); +MODULE_DESCRIPTION("STMicroelectronics ASC serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 9119cc0..e40ebe1 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -232,4 +232,7 @@ /* SH-SCI */ #define PORT_HSCIF 104 +/* ST ASC type numbers */ +#define PORT_ASC 105 + #endif /* _UAPILINUX_SERIAL_CORE_H */ -- cgit v0.10.2 From 12197de2cdb2ded83db7b5a3a06f4b275fb8e62c Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 16 Jul 2013 16:14:38 +0100 Subject: pci_ids.h: move PCI_VENDOR_ID_AMCC here PCI_VENDOR_ID_AMCC is defined locally in "drivers/staging/comedi/comedidev.h" for a few comedi hardware drivers, namely "adl_pci9118", "addi_apci_1500" and "addi_apci_3120" (also "addi_apci_1710" but that is not currently built and will probably be removed soon). Move the define into "include/linux/pci_ids.h" as it is shared by several drivers (albeit all comedi drivers currently). PCI_VENDOR_ID_AMCC happens to have the same value (0x10e8) as PCI_VENDOR_ID_ADDIDATA_OLD. The vendor ID is actually assigned to Applied Micro Circuits Corporation and Addi-Data were using device IDs assigned by AMCC on some of their earlier PCI boards. The PCI_VENDOR_ID_ADDIDATA_OLD define is still being used by the "8250_pci" PCI serial board driver. Signed-off-by: Ian Abbott Acked-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h index b75915f..9f4f73f 100644 --- a/drivers/staging/comedi/comedidev.h +++ b/drivers/staging/comedi/comedidev.h @@ -400,7 +400,6 @@ int comedi_driver_unregister(struct comedi_driver *); */ #define PCI_VENDOR_ID_KOLTER 0x1001 #define PCI_VENDOR_ID_ICP 0x104c -#define PCI_VENDOR_ID_AMCC 0x10e8 #define PCI_VENDOR_ID_DT 0x1116 #define PCI_VENDOR_ID_IOTECH 0x1616 #define PCI_VENDOR_ID_CONTEC 0x1221 diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3bed2e8..9d99119 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1311,6 +1311,8 @@ #define PCI_DEVICE_ID_IMS_TT128 0x9128 #define PCI_DEVICE_ID_IMS_TT3D 0x9135 +#define PCI_VENDOR_ID_AMCC 0x10e8 + #define PCI_VENDOR_ID_INTERG 0x10ea #define PCI_DEVICE_ID_INTERG_1682 0x1682 #define PCI_DEVICE_ID_INTERG_2000 0x2000 @@ -2256,7 +2258,7 @@ /* * ADDI-DATA GmbH communication cards */ -#define PCI_VENDOR_ID_ADDIDATA_OLD 0x10E8 +#define PCI_VENDOR_ID_ADDIDATA_OLD 0x10E8 /* actually AMCC */ #define PCI_VENDOR_ID_ADDIDATA 0x15B8 #define PCI_DEVICE_ID_ADDIDATA_APCI7500 0x7000 #define PCI_DEVICE_ID_ADDIDATA_APCI7420 0x7001 -- cgit v0.10.2 From 086231f7f809f998e4afacbc94ea1fdca9c01e15 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 16 Jul 2013 16:14:39 +0100 Subject: serial: 8250_pci: replace PCI_VENDOR_ID_ADDIDATA_OLD PCI_VENDOR_ID_ADDIDATA_OLD has the same value (0x10e8) as PCI_VENDOR_ID_AMCC in . The vender ID is actually assigned to Applied Micro Circuits Corporation. The 8250_pci driver uses PCI_VENDOR_ID_ADDIDATA_OLD in the lists of quirks and PCI IDs for the ADDI-DATA APCI-7800 card. Change it to use the more accurate PCI_VENDOR_ID_AMCC. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index c626c4f..fcfed9f 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1587,7 +1587,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { * ADDI-DATA GmbH communication cards */ { - .vendor = PCI_VENDOR_ID_ADDIDATA_OLD, + .vendor = PCI_VENDOR_ID_AMCC, .device = PCI_DEVICE_ID_ADDIDATA_APCI7800, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, @@ -4697,7 +4697,7 @@ static struct pci_device_id serial_pci_tbl[] = { 0, pbn_b0_1_115200 }, - { PCI_VENDOR_ID_ADDIDATA_OLD, + { PCI_VENDOR_ID_AMCC, PCI_DEVICE_ID_ADDIDATA_APCI7800, PCI_ANY_ID, PCI_ANY_ID, -- cgit v0.10.2 From 57c1f0e93428f37c7220ab33fa47177576eb9d44 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 16 Jul 2013 16:14:40 +0100 Subject: serial: 8250_pci: use local device ID for ADDI-DATA APCI-7800 The quirks and PCI ID table entries for the original ADDI-DATA APCI-7800 (not the newer APCI-7800-3) use PCI_DEVICE_ID_ADDIDATA_APCI7800 from but the device ID was actually assigned to ADDI-DATA by Applied Micro Circuits Corporation (PCI_VENDOR_ID_AMCC). Replace it locally with #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index fcfed9f..c810da7 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1565,6 +1565,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a +#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e #define PCI_VENDOR_ID_SUNIX 0x1fd4 #define PCI_DEVICE_ID_SUNIX_1999 0x1999 @@ -1588,7 +1589,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { */ { .vendor = PCI_VENDOR_ID_AMCC, - .device = PCI_DEVICE_ID_ADDIDATA_APCI7800, + .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = addidata_apci7800_setup, @@ -4698,7 +4699,7 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b0_1_115200 }, { PCI_VENDOR_ID_AMCC, - PCI_DEVICE_ID_ADDIDATA_APCI7800, + PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, PCI_ANY_ID, PCI_ANY_ID, 0, -- cgit v0.10.2 From fee8bf4b74e37bfeb8998a349cb788680eb3f634 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 16 Jul 2013 16:14:41 +0100 Subject: pci_ids.h: remove PCI_VENDOR_ID_ADDIDATA_OLD and PCI_DEVICE_ID_ADDIDATA_APCI7800 These two defines are no longer used. They were only used by the PCI serial driver "8250_pci" to support the original ADDI-DATA APCI-7800 card. In that driver, PCI_VENDOR_ID_ADDIDATA_OLD has been replaced with PCI_VENDOR_ID_AMCC which has the same value (0x10e8), and PCI_DEVICE_ID_ADDIDATA_APCI7800 has been replaced with a local #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 with the same value (0x818e). Signed-off-by: Ian Abbott Acked-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9d99119..6dec3d6 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2258,12 +2258,10 @@ /* * ADDI-DATA GmbH communication cards */ -#define PCI_VENDOR_ID_ADDIDATA_OLD 0x10E8 /* actually AMCC */ #define PCI_VENDOR_ID_ADDIDATA 0x15B8 #define PCI_DEVICE_ID_ADDIDATA_APCI7500 0x7000 #define PCI_DEVICE_ID_ADDIDATA_APCI7420 0x7001 #define PCI_DEVICE_ID_ADDIDATA_APCI7300 0x7002 -#define PCI_DEVICE_ID_ADDIDATA_APCI7800 0x818E #define PCI_DEVICE_ID_ADDIDATA_APCI7500_2 0x7009 #define PCI_DEVICE_ID_ADDIDATA_APCI7420_2 0x700A #define PCI_DEVICE_ID_ADDIDATA_APCI7300_2 0x700B -- cgit v0.10.2 From 4a5662d6a6412dabe0b5518bec111e17babbba05 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 24 Jul 2013 11:37:28 -0700 Subject: msm_serial: Fix NUL byte output on UARTDM UARTDM serial devices require us to wait for the entire TX fifo to drain before we can change the contents of the NCF_TX register. Furthermore, if we write any characters to the TX fifo within the same clock cycle of changing the NCF_TX register the NCF_TX register won't latch properly. To fix these issues we should read back the NCF_TX register to delay any TX fifo accesses by a clock cycle and we should wait for the TX fifo to drain (instead of just waiting for the fifo to be ready to receive more characters). Failure to do so leads to random NUL bytes interspersed in the output. Signed-off-by: Stephen Boyd Acked-by: David Brown Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 0b38b28..5a88d88 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -50,11 +50,14 @@ struct msm_port { unsigned int old_snap_state; }; -static inline void wait_for_xmitr(struct uart_port *port, int bits) +static inline void wait_for_xmitr(struct uart_port *port) { - if (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) - while ((msm_read(port, UART_ISR) & bits) != bits) - cpu_relax(); + while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) { + if (msm_read(port, UART_ISR) & UART_ISR_TX_READY) + break; + udelay(1); + } + msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR); } static void msm_stop_tx(struct uart_port *port) @@ -194,8 +197,9 @@ static void handle_rx(struct uart_port *port) static void reset_dm_count(struct uart_port *port) { - wait_for_xmitr(port, UART_ISR_TX_READY); + wait_for_xmitr(port); msm_write(port, 1, UARTDM_NCF_TX); + msm_read(port, UARTDM_NCF_TX); } static void handle_tx(struct uart_port *port) diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index e4acef5..15c186e 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -71,6 +71,7 @@ #define UART_CR_CMD_RESET_RFR (14 << 4) #define UART_CR_CMD_PROTECTION_EN (16 << 4) #define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) +#define UART_CR_CMD_RESET_TX_READY (3 << 8) #define UART_CR_TX_DISABLE (1 << 3) #define UART_CR_TX_ENABLE (1 << 2) #define UART_CR_RX_DISABLE (1 << 1) -- cgit v0.10.2 From f8fb952fd409a4c854a66473c11d35b4e5e9c2eb Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 24 Jul 2013 11:37:29 -0700 Subject: msm_serial: Fix sparse warnings drivers/tty/serial/msm_serial.c:302:6: warning: symbol 'msm_set_mctrl' was not declared. Should it be static? drivers/tty/serial/msm_serial.c:597:17: warning: incorrect type in argument 2 (different address spaces) drivers/tty/serial/msm_serial.c:597:17: expected void volatile [noderef] *addr drivers/tty/serial/msm_serial.c:597:17: got unsigned int * drivers/tty/serial/msm_serial.c:608:33: warning: incorrect type in argument 1 (different address spaces) drivers/tty/serial/msm_serial.c:608:33: expected void volatile [noderef] *addr drivers/tty/serial/msm_serial.c:608:33: got unsigned int *gsbi_base drivers/tty/serial/msm_serial.c:648:37: warning: incorrect type in assignment (different address spaces) drivers/tty/serial/msm_serial.c:648:37: expected unsigned int *gsbi_base drivers/tty/serial/msm_serial.c:648:37: got void [noderef] * Mark the ioremapped memory as __iomem and use writel instead of iowrite because we're not dealing with PCI devices. Also, mark msm_set_mctrl() static because it isn't used outside this file. Signed-off-by: Stephen Boyd Acked-by: David Brown Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 5a88d88..4184c51 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -45,7 +45,7 @@ struct msm_port { struct clk *clk; struct clk *pclk; unsigned int imr; - unsigned int *gsbi_base; + void __iomem *gsbi_base; int is_uartdm; unsigned int old_snap_state; }; @@ -299,7 +299,7 @@ static void msm_reset(struct uart_port *port) msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); } -void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) +static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) { unsigned int mr; mr = msm_read(port, UART_MR1); @@ -593,12 +593,10 @@ static void msm_release_port(struct uart_port *port) port->membase = NULL; if (msm_port->gsbi_base) { - iowrite32(GSBI_PROTOCOL_IDLE, msm_port->gsbi_base + - GSBI_CONTROL); - - gsbi_resource = platform_get_resource(pdev, - IORESOURCE_MEM, 1); + writel_relaxed(GSBI_PROTOCOL_IDLE, + msm_port->gsbi_base + GSBI_CONTROL); + gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (unlikely(!gsbi_resource)) return; @@ -672,10 +670,9 @@ static void msm_config_port(struct uart_port *port, int flags) if (ret) return; } - if (msm_port->is_uartdm) - iowrite32(GSBI_PROTOCOL_UART, msm_port->gsbi_base + - GSBI_CONTROL); + writel_relaxed(GSBI_PROTOCOL_UART, + msm_port->gsbi_base + GSBI_CONTROL); } static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) -- cgit v0.10.2 From 6909dadd914259f459828b11c378ddea08d40ab6 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 24 Jul 2013 11:37:30 -0700 Subject: msm_serial: Make baud_code detection more dynamic Currently msm_set_baud_rate() assumes the uart clock rate is 1.8432 MHz. This is not always true, and limits our options to program the baud rate. Instead of assuming the rate and hard-coding the baud_code based on it, calculate the divider that we want and try to find the closest baud_code that matches. This allows us to support uarts with faster clock speeds. Signed-off-by: Stephen Boyd Acked-by: David Brown Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 4184c51..ca2ae65 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -322,70 +322,60 @@ static void msm_break_ctl(struct uart_port *port, int break_ctl) msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); } +struct msm_baud_map { + u16 divisor; + u8 code; + u8 rxstale; +}; + +static const struct msm_baud_map * +msm_find_best_baud(struct uart_port *port, unsigned int baud) +{ + unsigned int i, divisor; + const struct msm_baud_map *entry; + static const struct msm_baud_map table[] = { + { 1536, 0x00, 1 }, + { 768, 0x11, 1 }, + { 384, 0x22, 1 }, + { 192, 0x33, 1 }, + { 96, 0x44, 1 }, + { 48, 0x55, 1 }, + { 32, 0x66, 1 }, + { 24, 0x77, 1 }, + { 16, 0x88, 1 }, + { 12, 0x99, 6 }, + { 8, 0xaa, 6 }, + { 6, 0xbb, 6 }, + { 4, 0xcc, 6 }, + { 3, 0xdd, 8 }, + { 2, 0xee, 16 }, + { 1, 0xff, 31 }, + }; + + divisor = uart_get_divisor(port, baud); + + for (i = 0, entry = table; i < ARRAY_SIZE(table); i++, entry++) + if (entry->divisor <= divisor) + break; + + return entry; /* Default to smallest divider */ +} + static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) { - unsigned int baud_code, rxstale, watermark; + unsigned int rxstale, watermark; struct msm_port *msm_port = UART_TO_MSM(port); + const struct msm_baud_map *entry; - switch (baud) { - case 300: - baud_code = UART_CSR_300; - rxstale = 1; - break; - case 600: - baud_code = UART_CSR_600; - rxstale = 1; - break; - case 1200: - baud_code = UART_CSR_1200; - rxstale = 1; - break; - case 2400: - baud_code = UART_CSR_2400; - rxstale = 1; - break; - case 4800: - baud_code = UART_CSR_4800; - rxstale = 1; - break; - case 9600: - baud_code = UART_CSR_9600; - rxstale = 2; - break; - case 14400: - baud_code = UART_CSR_14400; - rxstale = 3; - break; - case 19200: - baud_code = UART_CSR_19200; - rxstale = 4; - break; - case 28800: - baud_code = UART_CSR_28800; - rxstale = 6; - break; - case 38400: - baud_code = UART_CSR_38400; - rxstale = 8; - break; - case 57600: - baud_code = UART_CSR_57600; - rxstale = 16; - break; - case 115200: - default: - baud_code = UART_CSR_115200; - baud = 115200; - rxstale = 31; - break; - } + entry = msm_find_best_baud(port, baud); if (msm_port->is_uartdm) msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); - msm_write(port, baud_code, UART_CSR); + msm_write(port, entry->code, UART_CSR); /* RX stale watermark */ + rxstale = entry->rxstale; watermark = UART_IPR_STALE_LSB & rxstale; watermark |= UART_IPR_RXSTALE_LAST; watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index 15c186e..469fda5 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -38,19 +38,7 @@ #define UART_MR2_PARITY_MODE_SPACE 0x3 #define UART_MR2_PARITY_MODE 0x3 -#define UART_CSR 0x0008 -#define UART_CSR_115200 0xFF -#define UART_CSR_57600 0xEE -#define UART_CSR_38400 0xDD -#define UART_CSR_28800 0xCC -#define UART_CSR_19200 0xBB -#define UART_CSR_14400 0xAA -#define UART_CSR_9600 0x99 -#define UART_CSR_4800 0x77 -#define UART_CSR_2400 0x55 -#define UART_CSR_1200 0x44 -#define UART_CSR_600 0x33 -#define UART_CSR_300 0x22 +#define UART_CSR 0x0008 #define UART_TF 0x000C #define UARTDM_TF 0x0070 @@ -152,6 +140,7 @@ static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) msm_write(port, 0xF1, UART_NREG); msm_write(port, 0x0F, UART_DREG); msm_write(port, 0x1A, UART_MNDREG); + port->uartclk = 1843200; } /* @@ -163,6 +152,7 @@ static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) msm_write(port, 0xF6, UART_NREG); msm_write(port, 0x0F, UART_DREG); msm_write(port, 0x0A, UART_MNDREG); + port->uartclk = 1843200; } static inline @@ -170,7 +160,7 @@ void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port) { if (port->uartclk == 19200000) msm_serial_set_mnd_regs_tcxo(port); - else + else if (port->uartclk == 4800000) msm_serial_set_mnd_regs_tcxoby4(port); } -- cgit v0.10.2 From 17fae28efe8f460918e13aedd7163690206c682d Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 24 Jul 2013 11:37:31 -0700 Subject: msm_serial: Send more than 1 character at a time on UARTDM UARTDM cores have a TX fifo that can accept more than one character per register write, but the msm_serial driver currently only supports 1 character mode. Add support for this mode of operation to speed up the transmit path on DM devices. Signed-off-by: Stephen Boyd Acked-by: David Brown Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index ca2ae65..252d514 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -195,10 +195,10 @@ static void handle_rx(struct uart_port *port) tty_flip_buffer_push(tport); } -static void reset_dm_count(struct uart_port *port) +static void reset_dm_count(struct uart_port *port, int count) { wait_for_xmitr(port); - msm_write(port, 1, UARTDM_NCF_TX); + msm_write(port, count, UARTDM_NCF_TX); msm_read(port, UARTDM_NCF_TX); } @@ -206,39 +206,52 @@ static void handle_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; struct msm_port *msm_port = UART_TO_MSM(port); - int sent_tx; + unsigned int tx_count, num_chars; + unsigned int tf_pointer = 0; + + tx_count = uart_circ_chars_pending(xmit); + tx_count = min3(tx_count, (unsigned int)UART_XMIT_SIZE - xmit->tail, + port->fifosize); if (port->x_char) { if (msm_port->is_uartdm) - reset_dm_count(port); + reset_dm_count(port, tx_count + 1); msm_write(port, port->x_char, msm_port->is_uartdm ? UARTDM_TF : UART_TF); port->icount.tx++; port->x_char = 0; + } else if (tx_count && msm_port->is_uartdm) { + reset_dm_count(port, tx_count); } - if (msm_port->is_uartdm) - reset_dm_count(port); + while (tf_pointer < tx_count) { + int i; + char buf[4] = { 0 }; + unsigned int *bf = (unsigned int *)&buf; - while (msm_read(port, UART_SR) & UART_SR_TX_READY) { - if (uart_circ_empty(xmit)) { - /* disable tx interrupts */ - msm_port->imr &= ~UART_IMR_TXLEV; - msm_write(port, msm_port->imr, UART_IMR); + if (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) break; - } - msm_write(port, xmit->buf[xmit->tail], - msm_port->is_uartdm ? UARTDM_TF : UART_TF); if (msm_port->is_uartdm) - reset_dm_count(port); + num_chars = min(tx_count - tf_pointer, sizeof(buf)); + else + num_chars = 1; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - sent_tx = 1; + for (i = 0; i < num_chars; i++) { + buf[i] = xmit->buf[xmit->tail + i]; + port->icount.tx++; + } + + msm_write(port, *bf, msm_port->is_uartdm ? UARTDM_TF : UART_TF); + xmit->tail = (xmit->tail + num_chars) & (UART_XMIT_SIZE - 1); + tf_pointer += num_chars; } + /* disable tx interrupts if nothing more to send */ + if (uart_circ_empty(xmit)) + msm_stop_tx(port); + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); } @@ -759,7 +772,7 @@ static void msm_console_putchar(struct uart_port *port, int c) struct msm_port *msm_port = UART_TO_MSM(port); if (msm_port->is_uartdm) - reset_dm_count(port); + reset_dm_count(port, 1); while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) ; -- cgit v0.10.2 From cf940ebe98e693aec2d10f9af2fb84eb55234e3c Mon Sep 17 00:00:00 2001 From: Andreas Platschek Date: Fri, 26 Jul 2013 06:46:37 +0200 Subject: tty: Remove dead code -> The ledptrs[] array is never initialized. -> There is no place where kbd->ledmode is set to LED_SHOW_MEM therefore the if statement does not make much sense. -> Since LED_SHOW_MEM is not used, it can be removed from the header file as well. Signed-off-by: Andreas Platschek Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index a9af1b9a..d0e3a44 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -132,12 +132,6 @@ static int shift_state = 0; static unsigned char ledstate = 0xff; /* undefined */ static unsigned char ledioctl; -static struct ledptr { - unsigned int *addr; - unsigned int mask; - unsigned char valid:1; -} ledptrs[3]; - /* * Notifier list for console keyboard events */ @@ -994,24 +988,11 @@ void setledstate(struct kbd_struct *kbd, unsigned int led) static inline unsigned char getleds(void) { struct kbd_struct *kbd = kbd_table + fg_console; - unsigned char leds; - int i; if (kbd->ledmode == LED_SHOW_IOCTL) return ledioctl; - leds = kbd->ledflagstate; - - if (kbd->ledmode == LED_SHOW_MEM) { - for (i = 0; i < 3; i++) - if (ledptrs[i].valid) { - if (*ledptrs[i].addr & ledptrs[i].mask) - leds |= (1 << i); - else - leds &= ~(1 << i); - } - } - return leds; + return kbd->ledflagstate; } static int kbd_update_leds_helper(struct input_handle *handle, void *data) diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h index b7c8cdc..cbfb171 100644 --- a/include/linux/kbd_kern.h +++ b/include/linux/kbd_kern.h @@ -36,10 +36,9 @@ struct kbd_struct { #define VC_CTRLRLOCK KG_CTRLR /* ctrlr lock mode */ unsigned char slockstate; /* for `sticky' Shift, Ctrl, etc. */ - unsigned char ledmode:2; /* one 2-bit value */ + unsigned char ledmode:1; #define LED_SHOW_FLAGS 0 /* traditional state */ #define LED_SHOW_IOCTL 1 /* only change leds upon ioctl */ -#define LED_SHOW_MEM 2 /* `heartbeat': peek into memory */ unsigned char ledflagstate:4; /* flags, not lights */ unsigned char default_ledflagstate:4; -- cgit v0.10.2 From 299a62575a63b19add8206642b340f1b54ec4faf Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 26 Jul 2013 16:22:02 +0200 Subject: serial8250-em: Convert to devm_* managed helpers Replace kzalloc and clk_get by their managed counterparts to simplify error and cleanup paths. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index 916cc19..5f3bba1 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -95,25 +95,23 @@ static int serial8250_em_probe(struct platform_device *pdev) struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); struct serial8250_em_priv *priv; struct uart_8250_port up; - int ret = -EINVAL; + int ret; if (!regs || !irq) { dev_err(&pdev->dev, "missing registers or irq\n"); - goto err0; + return -EINVAL; } - priv = kzalloc(sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) { dev_err(&pdev->dev, "unable to allocate private data\n"); - ret = -ENOMEM; - goto err0; + return -ENOMEM; } - priv->sclk = clk_get(&pdev->dev, "sclk"); + priv->sclk = devm_clk_get(&pdev->dev, "sclk"); if (IS_ERR(priv->sclk)) { dev_err(&pdev->dev, "unable to get clock\n"); - ret = PTR_ERR(priv->sclk); - goto err1; + return PTR_ERR(priv->sclk); } memset(&up, 0, sizeof(up)); @@ -136,20 +134,13 @@ static int serial8250_em_probe(struct platform_device *pdev) ret = serial8250_register_8250_port(&up); if (ret < 0) { dev_err(&pdev->dev, "unable to register 8250 port\n"); - goto err2; + clk_disable(priv->sclk); + return ret; } priv->line = ret; platform_set_drvdata(pdev, priv); return 0; - - err2: - clk_disable(priv->sclk); - clk_put(priv->sclk); - err1: - kfree(priv); - err0: - return ret; } static int serial8250_em_remove(struct platform_device *pdev) @@ -158,8 +149,6 @@ static int serial8250_em_remove(struct platform_device *pdev) serial8250_unregister_port(priv->line); clk_disable(priv->sclk); - clk_put(priv->sclk); - kfree(priv); return 0; } -- cgit v0.10.2 From c29782965b428d647742c5f22d9eca7a2d0f820f Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Mon, 29 Jul 2013 19:27:32 +0400 Subject: serial: max310x: Fix dev_pm_ops This patch fixes wrong dev_pm_ops which caused by commit: serial: max310x: Driver rework. CC drivers/tty/serial/max310x.o LD drivers/video/fb.o CC drivers/w1/slaves/w1_ds2433.o CC drivers/w1/slaves/w1_ds2760.o CC drivers/xen/balloon.o CC drivers/video/backlight/adp8870_bl.o drivers/tty/serial/max310x.c:1292:8: warning: initialization from incompatible pointer type [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: (near initialization for 'max310x_pm_ops.suspend') [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: initialization from incompatible pointer type [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: (near initialization for 'max310x_pm_ops.resume') [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: initialization from incompatible pointer type [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: (near initialization for 'max310x_pm_ops.freeze') [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: initialization from incompatible pointer type [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: (near initialization for 'max310x_pm_ops.thaw') [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: initialization from incompatible pointer type [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: (near initialization for 'max310x_pm_ops.poweroff') [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: initialization from incompatible pointer type [enabled by default] drivers/tty/serial/max310x.c:1292:8: warning: (near initialization for 'max310x_pm_ops.restore') [enabled by default] Reported-by: kbuild test robot Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 4ab5b27..b2e707a 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -991,10 +991,9 @@ static const struct uart_ops max310x_ops = { .verify_port = max310x_verify_port, }; -static int __maybe_unused max310x_suspend(struct spi_device *spi, - pm_message_t state) +static int __maybe_unused max310x_suspend(struct device *dev) { - struct max310x_port *s = dev_get_drvdata(&spi->dev); + struct max310x_port *s = dev_get_drvdata(dev); int i; for (i = 0; i < s->uart.nr; i++) { @@ -1005,9 +1004,9 @@ static int __maybe_unused max310x_suspend(struct spi_device *spi, return 0; } -static int __maybe_unused max310x_resume(struct spi_device *spi) +static int __maybe_unused max310x_resume(struct device *dev) { - struct max310x_port *s = dev_get_drvdata(&spi->dev); + struct max310x_port *s = dev_get_drvdata(dev); int i; for (i = 0; i < s->uart.nr; i++) { -- cgit v0.10.2 From e06922aa836f098c4893218a1c656ce7d73a3b6a Mon Sep 17 00:00:00 2001 From: Alexandru Juncu Date: Sat, 27 Jul 2013 11:14:39 +0300 Subject: TTY: synclink: replace bitmasks add operation with OR operation. Found with coccinelle, manually fixed and verified. Signed-off-by: Alexandru Juncu Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 8eaf1ab..e1ce141 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -577,22 +577,22 @@ struct mgsl_struct { #define SICR_RXC_ACTIVE BIT15 #define SICR_RXC_INACTIVE BIT14 -#define SICR_RXC (BIT15+BIT14) +#define SICR_RXC (BIT15|BIT14) #define SICR_TXC_ACTIVE BIT13 #define SICR_TXC_INACTIVE BIT12 -#define SICR_TXC (BIT13+BIT12) +#define SICR_TXC (BIT13|BIT12) #define SICR_RI_ACTIVE BIT11 #define SICR_RI_INACTIVE BIT10 -#define SICR_RI (BIT11+BIT10) +#define SICR_RI (BIT11|BIT10) #define SICR_DSR_ACTIVE BIT9 #define SICR_DSR_INACTIVE BIT8 -#define SICR_DSR (BIT9+BIT8) +#define SICR_DSR (BIT9|BIT8) #define SICR_DCD_ACTIVE BIT7 #define SICR_DCD_INACTIVE BIT6 -#define SICR_DCD (BIT7+BIT6) +#define SICR_DCD (BIT7|BIT6) #define SICR_CTS_ACTIVE BIT5 #define SICR_CTS_INACTIVE BIT4 -#define SICR_CTS (BIT5+BIT4) +#define SICR_CTS (BIT5|BIT4) #define SICR_RCC_UNDERFLOW BIT3 #define SICR_DPLL_NO_SYNC BIT2 #define SICR_BRG1_ZERO BIT1 @@ -1161,7 +1161,7 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info ) { u16 status = usc_InReg( info, RCSR ); - if ( debug_level >= DEBUG_LEVEL_ISR ) + if ( debug_level >= DEBUG_LEVEL_ISR ) printk("%s(%d):mgsl_isr_receive_status status=%04X\n", __FILE__,__LINE__,status); @@ -1181,7 +1181,7 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info ) (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED)); } - if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) { + if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) { if (status & RXSTATUS_EXITED_HUNT) info->icount.exithunt++; if (status & RXSTATUS_IDLE_RECEIVED) @@ -1463,21 +1463,21 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info ) /* get the status of the received byte */ status = usc_InReg(info, RCSR); - if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + - RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) + if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR | + RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); icount->rx++; flag = 0; - if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + - RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) { - printk("rxerr=%04X\n",status); + if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR | + RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) { + printk("rxerr=%04X\n",status); /* update error statistics */ if ( status & RXSTATUS_BREAK_RECEIVED ) { - status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR); + status &= ~(RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR); icount->brk++; - } else if (status & RXSTATUS_PARITY_ERROR) + } else if (status & RXSTATUS_PARITY_ERROR) icount->parity++; else if (status & RXSTATUS_FRAMING_ERROR) icount->frame++; @@ -1488,7 +1488,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info ) icount->overrun++; } - /* discard char if tty control flags say so */ + /* discard char if tty control flags say so */ if (status & info->ignore_status_mask) continue; @@ -1545,8 +1545,8 @@ static void mgsl_isr_misc( struct mgsl_struct *info ) usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); usc_DmaCmd(info, DmaCmd_ResetRxChannel); usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); - usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS); + usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS); + usc_DisableInterrupts(info, RECEIVE_DATA | RECEIVE_STATUS); /* schedule BH handler to restart receiver */ info->pending_bh |= BH_RECEIVE; @@ -1595,7 +1595,7 @@ static void mgsl_isr_receive_dma( struct mgsl_struct *info ) u16 status; /* clear interrupt pending and IUS bit for Rx DMA IRQ */ - usc_OutDmaReg( info, CDIR, BIT9+BIT1 ); + usc_OutDmaReg( info, CDIR, BIT9 | BIT1 ); /* Read the receive DMA status to identify interrupt type. */ /* This also clears the status bits. */ @@ -1639,7 +1639,7 @@ static void mgsl_isr_transmit_dma( struct mgsl_struct *info ) u16 status; /* clear interrupt pending and IUS bit for Tx DMA IRQ */ - usc_OutDmaReg(info, CDIR, BIT8+BIT0 ); + usc_OutDmaReg(info, CDIR, BIT8 | BIT0 ); /* Read the transmit DMA status to identify interrupt type. */ /* This also clears the status bits. */ @@ -1832,8 +1832,8 @@ static void shutdown(struct mgsl_struct * info) usc_DisableMasterIrqBit(info); usc_stop_receiver(info); usc_stop_transmitter(info); - usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS + - TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC ); + usc_DisableInterrupts(info,RECEIVE_DATA | RECEIVE_STATUS | + TRANSMIT_DATA | TRANSMIT_STATUS | IO_PIN | MISC ); usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); /* Disable DMAEN (Port 7, Bit 14) */ @@ -1886,7 +1886,7 @@ static void mgsl_program_hw(struct mgsl_struct *info) info->ri_chkcount = 0; info->dsr_chkcount = 0; - usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI); + usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI); usc_EnableInterrupts(info, IO_PIN); usc_get_serial_signals(info); @@ -2773,7 +2773,7 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr) if (!waitqueue_active(&info->event_wait_q)) { /* disable enable exit hunt mode/idle rcvd IRQs */ usc_OutReg(info, RICR, usc_InReg(info,RICR) & - ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)); + ~(RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)); } spin_unlock_irqrestore(&info->irq_spinlock,flags); } @@ -3092,7 +3092,7 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp) printk("%s(%d):mgsl_close(%s) entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - if (tty_port_close_start(&info->port, tty, filp) == 0) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; mutex_lock(&info->port.mutex); @@ -4297,7 +4297,7 @@ static struct mgsl_struct* mgsl_allocate_device(void) spin_lock_init(&info->irq_spinlock); spin_lock_init(&info->netlock); memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; + info->idle_mode = HDLC_TXIDLE_FLAGS; info->num_tx_dma_buffers = 1; info->num_tx_holding_buffers = 0; } @@ -4722,7 +4722,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info ) else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG ) RegValue |= BIT15; else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC ) - RegValue |= BIT15 + BIT14; + RegValue |= BIT15 | BIT14; } if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE ) @@ -4763,11 +4763,11 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info ) switch ( info->params.encoding ) { case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break; case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break; } if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) @@ -4838,15 +4838,15 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info ) switch ( info->params.encoding ) { case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break; case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break; } if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) - RegValue |= BIT9 + BIT8; + RegValue |= BIT9 | BIT8; else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8); @@ -4957,7 +4957,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info ) RegValue = 0x0000; - if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) { + if ( info->params.flags & (HDLC_FLAG_RXC_DPLL | HDLC_FLAG_TXC_DPLL) ) { u32 XtalSpeed; u32 DpllDivisor; u16 Tc; @@ -5019,7 +5019,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info ) case HDLC_ENCODING_BIPHASE_MARK: case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break; case HDLC_ENCODING_BIPHASE_LEVEL: - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 | BIT8; break; } } @@ -5056,8 +5056,8 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info ) /* enable Master Interrupt Enable bit (MIE) */ usc_EnableMasterIrqBit( info ); - usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA + - TRANSMIT_STATUS + TRANSMIT_DATA + MISC); + usc_ClearIrqPendingBits( info, RECEIVE_STATUS | RECEIVE_DATA | + TRANSMIT_STATUS | TRANSMIT_DATA | MISC); /* arm RCC underflow interrupt */ usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3)); @@ -5175,14 +5175,14 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info ) switch ( info->params.preamble_length ) { case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break; case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break; - case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break; + case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 | BIT10; break; } switch ( info->params.preamble ) { - case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break; + case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 | BIT12; break; case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break; case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break; - case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break; + case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 | BIT8; break; } usc_OutReg( info, CCR, RegValue ); @@ -5221,7 +5221,7 @@ static void usc_enable_loopback(struct mgsl_struct *info, int enable) { if (enable) { /* blank external TXD output */ - usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6)); + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6)); /* Clock mode Control Register (CMCR) * @@ -5260,7 +5260,7 @@ static void usc_enable_loopback(struct mgsl_struct *info, int enable) outw( 0x0300, info->io_base + CCAR ); } else { /* enable external TXD output */ - usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6)); + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6)); /* clear Internal Data loopback mode */ info->loopback_bits = 0; @@ -5447,13 +5447,13 @@ static void usc_process_rxoverrun_sync( struct mgsl_struct *info ) usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); usc_EnableInterrupts( info, RECEIVE_STATUS ); /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ - usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); + usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 ); usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); usc_DmaCmd( info, DmaCmd_InitRxChannel ); if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) @@ -5488,8 +5488,8 @@ static void usc_stop_receiver( struct mgsl_struct *info ) usc_DmaCmd( info, DmaCmd_ResetRxChannel ); usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); - usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); + usc_DisableInterrupts( info, RECEIVE_DATA | RECEIVE_STATUS ); usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); @@ -5536,13 +5536,13 @@ static void usc_start_receiver( struct mgsl_struct *info ) usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); usc_EnableInterrupts( info, RECEIVE_STATUS ); /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ - usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); + usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 ); usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); usc_DmaCmd( info, DmaCmd_InitRxChannel ); if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) @@ -5551,7 +5551,7 @@ static void usc_start_receiver( struct mgsl_struct *info ) usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); } else { usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); + usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS); usc_EnableInterrupts(info, RECEIVE_DATA); usc_RTCmd( info, RTCmd_PurgeRxFifo ); @@ -5925,7 +5925,7 @@ static void usc_set_async_mode( struct mgsl_struct *info ) RegValue = 0; if ( info->params.data_bits != 8 ) - RegValue |= BIT4+BIT3+BIT2; + RegValue |= BIT4 | BIT3 | BIT2; if ( info->params.parity != ASYNC_PARITY_NONE ) { RegValue |= BIT5; @@ -5982,7 +5982,7 @@ static void usc_set_async_mode( struct mgsl_struct *info ) RegValue = 0; if ( info->params.data_bits != 8 ) - RegValue |= BIT4+BIT3+BIT2; + RegValue |= BIT4 | BIT3 | BIT2; if ( info->params.parity != ASYNC_PARITY_NONE ) { RegValue |= BIT5; @@ -6129,7 +6129,7 @@ static void usc_loopback_frame( struct mgsl_struct *info ) /* WAIT FOR RECEIVE COMPLETE */ for (i=0 ; i<1000 ; i++) - if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1)) + if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1)) break; /* clear Internal Data loopback mode */ @@ -6579,8 +6579,8 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info) status = info->rx_buffer_list[EndIndex].status; - if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + - RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { + if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN | + RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) { if ( status & RXSTATUS_SHORT_FRAME ) info->icount.rxshort++; else if ( status & RXSTATUS_ABORT ) @@ -6762,8 +6762,8 @@ static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info) status = info->rx_buffer_list[CurrentIndex].status; - if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + - RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { + if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN | + RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) { if ( status & RXSTATUS_SHORT_FRAME ) info->icount.rxshort++; else if ( status & RXSTATUS_ABORT ) @@ -6899,7 +6899,7 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info, /* set CMR:13 to start transmit when * next GoAhead (abort) is received */ - info->cmr_value |= BIT13; + info->cmr_value |= BIT13; } /* begin loading the frame in the next available tx dma @@ -7278,7 +7278,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info ) spin_unlock_irqrestore(&info->irq_spinlock,flags); - + /******************************/ /* WAIT FOR TRANSMIT COMPLETE */ /******************************/ @@ -7292,7 +7292,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info ) status = usc_InReg( info, TCSR ); spin_unlock_irqrestore(&info->irq_spinlock,flags); - while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) { + while ( !(status & (BIT6 | BIT5 | BIT4 | BIT2 | BIT1)) ) { if (time_after(jiffies, EndTime)) { rc = false; break; @@ -7307,7 +7307,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info ) if ( rc ){ /* CHECK FOR TRANSMIT ERRORS */ - if ( status & (BIT5 + BIT1) ) + if ( status & (BIT5 | BIT1) ) rc = false; } @@ -7333,7 +7333,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info ) /* CHECK FOR RECEIVE ERRORS */ status = info->rx_buffer_list[0].status; - if ( status & (BIT8 + BIT3 + BIT1) ) { + if ( status & (BIT8 | BIT3 | BIT1) ) { /* receive error has occurred */ rc = false; } else { @@ -7605,7 +7605,7 @@ static void usc_loopmode_send_done( struct mgsl_struct * info ) { info->loopmode_send_done_requested = false; /* clear CMR:13 to 0 to start echoing RxData to TxData */ - info->cmr_value &= ~BIT13; + info->cmr_value &= ~BIT13; usc_OutReg(info, CMR, info->cmr_value); } -- cgit v0.10.2 From 0a09ae98eade956bbc681cb905584effe4a1ed95 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Mon, 29 Jul 2013 09:58:14 -0700 Subject: serial: pch_uart: Remove __initdata annotation from dmi_table The dmi_table is best accessed from the probe function, which is not an __init function. Drop the __initdata annotation from the dmi_table to avoid the section mismatch compiler warnings: WARNING: drivers/tty/serial/pch_uart.o(.text+0x4871): Section mismatch in reference from the function pch_uart_init_port() to the variable .init.data:pch_uart_dmi_table Signed-off-by: Darren Hart Reported-by: kbuild test robot Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 271cc73..bc0aa08 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -373,7 +373,7 @@ static const struct file_operations port_regs_ops = { }; #endif /* CONFIG_DEBUG_FS */ -static struct dmi_system_id __initdata pch_uart_dmi_table[] = { +static struct dmi_system_id pch_uart_dmi_table[] = { { .ident = "CM-iTC", { -- cgit v0.10.2 From 64e22ebe49780e2454c8788c5af9f1e0e500e1a2 Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:24 +0800 Subject: serial: at91: correct definition from DMA to PDC The DMA is available since at91sam9x5 socs, before that, we use PDC. Signed-off-by: Elen Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 5c17f8d..1d59563 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -139,11 +139,11 @@ struct atmel_uart_port { u32 backup_imr; /* IMR saved during suspend */ int break_active; /* break being received */ - short use_dma_rx; /* enable PDC receiver */ + bool use_pdc_rx; /* enable PDC receiver */ short pdc_rx_idx; /* current PDC RX buffer */ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ - short use_dma_tx; /* enable PDC transmitter */ + bool use_pdc_tx; /* enable PDC transmitter */ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ struct tasklet_struct tasklet; @@ -180,26 +180,26 @@ to_atmel_uart_port(struct uart_port *uart) } #ifdef CONFIG_SERIAL_ATMEL_PDC -static bool atmel_use_dma_rx(struct uart_port *port) +static bool atmel_use_pdc_rx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - return atmel_port->use_dma_rx; + return atmel_port->use_pdc_rx; } -static bool atmel_use_dma_tx(struct uart_port *port) +static bool atmel_use_pdc_tx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - return atmel_port->use_dma_tx; + return atmel_port->use_pdc_tx; } #else -static bool atmel_use_dma_rx(struct uart_port *port) +static bool atmel_use_pdc_rx(struct uart_port *port) { return false; } -static bool atmel_use_dma_tx(struct uart_port *port) +static bool atmel_use_pdc_tx(struct uart_port *port) { return false; } @@ -232,7 +232,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); - if (atmel_use_dma_tx(port)) + if (atmel_use_pdc_tx(port)) atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; else @@ -344,7 +344,7 @@ static void atmel_stop_tx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { /* disable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); } @@ -363,7 +363,7 @@ static void atmel_start_tx(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) /* The transmitter is already running. Yes, we really need this.*/ @@ -389,7 +389,7 @@ static void atmel_start_rx(struct uart_port *port) UART_PUT_CR(port, ATMEL_US_RXEN); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* enable PDC controller */ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | port->read_status_mask); @@ -406,7 +406,7 @@ static void atmel_stop_rx(struct uart_port *port) { UART_PUT_CR(port, ATMEL_US_RXDIS); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* disable PDC receive */ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | @@ -571,7 +571,7 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* * PDC receive. Just schedule the tasklet and let it * figure out the details. @@ -660,7 +660,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) /* * Called from tasklet with ENDTX and TXBUFE interrupts disabled. */ -static void atmel_tx_dma(struct uart_port *port) +static void atmel_tx_pdc(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); struct circ_buf *xmit = &port->state->xmit; @@ -777,7 +777,7 @@ static void atmel_rx_from_ring(struct uart_port *port) spin_lock(&port->lock); } -static void atmel_rx_from_dma(struct uart_port *port) +static void atmel_rx_from_pdc(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); struct tty_port *tport = &port->state->port; @@ -867,8 +867,8 @@ static void atmel_tasklet_func(unsigned long data) /* The interrupt handler does not take the lock */ spin_lock(&port->lock); - if (atmel_use_dma_tx(port)) - atmel_tx_dma(port); + if (atmel_use_pdc_tx(port)) + atmel_tx_pdc(port); else atmel_tx_chars(port); @@ -892,8 +892,8 @@ static void atmel_tasklet_func(unsigned long data) atmel_port->irq_status_prev = status; } - if (atmel_use_dma_rx(port)) - atmel_rx_from_dma(port); + if (atmel_use_pdc_rx(port)) + atmel_rx_from_pdc(port); else atmel_rx_from_ring(port); @@ -929,7 +929,7 @@ static int atmel_startup(struct uart_port *port) /* * Initialize DMA (if necessary) */ - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { int i; for (i = 0; i < 2; i++) { @@ -963,7 +963,7 @@ static int atmel_startup(struct uart_port *port) UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); UART_PUT_RNCR(port, PDC_BUFFER_SIZE); } - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; struct circ_buf *xmit = &port->state->xmit; @@ -999,7 +999,7 @@ static int atmel_startup(struct uart_port *port) /* enable xmit & rcvr */ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { /* set UART timeout */ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); UART_PUT_CR(port, ATMEL_US_STTTO); @@ -1030,7 +1030,7 @@ static void atmel_shutdown(struct uart_port *port) /* * Shut-down the DMA. */ - if (atmel_use_dma_rx(port)) { + if (atmel_use_pdc_rx(port)) { int i; for (i = 0; i < 2; i++) { @@ -1043,7 +1043,7 @@ static void atmel_shutdown(struct uart_port *port) kfree(pdc->buf); } } - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; dma_unmap_single(port->dev, @@ -1079,7 +1079,7 @@ static void atmel_flush_buffer(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { + if (atmel_use_pdc_tx(port)) { UART_PUT_TCR(port, 0); atmel_port->pdc_tx.ofs = 0; } @@ -1192,7 +1192,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_iflag & (BRKINT | PARMRK)) port->read_status_mask |= ATMEL_US_RXBRK; - if (atmel_use_dma_rx(port)) + if (atmel_use_pdc_rx(port)) /* need to enable error interrupts */ UART_PUT_IER(port, port->read_status_mask); @@ -1429,13 +1429,14 @@ static void atmel_of_init_port(struct atmel_uart_port *atmel_port, /* DMA/PDC usage specification */ if (of_get_property(np, "atmel,use-dma-rx", NULL)) - atmel_port->use_dma_rx = 1; + atmel_port->use_pdc_rx = true; else - atmel_port->use_dma_rx = 0; + atmel_port->use_pdc_rx = false; + if (of_get_property(np, "atmel,use-dma-tx", NULL)) - atmel_port->use_dma_tx = 1; + atmel_port->use_pdc_tx = true; else - atmel_port->use_dma_tx = 0; + atmel_port->use_pdc_tx = false; /* rs485 properties */ if (of_property_read_u32_array(np, "rs485-rts-delay", @@ -1467,8 +1468,8 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, if (pdev->dev.of_node) { atmel_of_init_port(atmel_port, pdev->dev.of_node); } else { - atmel_port->use_dma_rx = pdata->use_dma_rx; - atmel_port->use_dma_tx = pdata->use_dma_tx; + atmel_port->use_pdc_rx = pdata->use_dma_rx; + atmel_port->use_pdc_tx = pdata->use_dma_tx; atmel_port->rs485 = pdata->rs485; } @@ -1515,7 +1516,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ if (atmel_port->rs485.flags & SER_RS485_ENABLED) atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - else if (atmel_use_dma_tx(port)) { + else if (atmel_use_pdc_tx(port)) { port->fifosize = PDC_BUFFER_SIZE; atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; } else { @@ -1807,7 +1808,7 @@ static int atmel_serial_probe(struct platform_device *pdev) if (ret) goto err; - if (!atmel_use_dma_rx(&port->uart)) { + if (!atmel_use_pdc_rx(&port->uart)) { ret = -ENOMEM; data = kmalloc(sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL); -- cgit v0.10.2 From a930e52875e96709cc01e4babcb8351687c5a58e Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:25 +0800 Subject: serial: at91: use function pointer to choose pdc or pio use function pointer can avoid define atmel_use_pdc_tx/rx everywhere. (*prepare_rx/tx)() is in setup transfer stage. (*schedule_rx/tx)() is in tasklet schedule stage. (*release_rx/tx)() is used when shutdown the transfer. Signed-off-by: Elen Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 1d59563..b56123d 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -154,6 +154,12 @@ struct atmel_uart_port { struct serial_rs485 rs485; /* rs485 settings */ unsigned int tx_done_mask; + int (*prepare_rx)(struct uart_port *port); + int (*prepare_tx)(struct uart_port *port); + void (*schedule_rx)(struct uart_port *port); + void (*schedule_tx)(struct uart_port *port); + void (*release_rx)(struct uart_port *port); + void (*release_tx)(struct uart_port *port); }; static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; @@ -657,6 +663,17 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) return pass_counter ? IRQ_HANDLED : IRQ_NONE; } +static void atmel_release_tx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_TO_DEVICE); +} + /* * Called from tasklet with ENDTX and TXBUFE interrupts disabled. */ @@ -709,6 +726,23 @@ static void atmel_tx_pdc(struct uart_port *port) uart_write_wakeup(port); } +static int atmel_prepare_tx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + struct circ_buf *xmit = &port->state->xmit; + + pdc->buf = xmit->buf; + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + pdc->dma_size = UART_XMIT_SIZE; + pdc->ofs = 0; + + return 0; +} + static void atmel_rx_from_ring(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); @@ -777,6 +811,22 @@ static void atmel_rx_from_ring(struct uart_port *port) spin_lock(&port->lock); } +static void atmel_release_rx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_FROM_DEVICE); + kfree(pdc->buf); + } +} + static void atmel_rx_from_pdc(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); @@ -854,6 +904,45 @@ static void atmel_rx_from_pdc(struct uart_port *port) UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); } +static int atmel_prepare_rx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); + if (pdc->buf == NULL) { + if (i != 0) { + dma_unmap_single(port->dev, + atmel_port->pdc_rx[0].dma_addr, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + kfree(atmel_port->pdc_rx[0].buf); + } + atmel_port->use_pdc_rx = 0; + return -ENOMEM; + } + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + pdc->dma_size = PDC_BUFFER_SIZE; + pdc->ofs = 0; + } + + atmel_port->pdc_rx_idx = 0; + + UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); + UART_PUT_RCR(port, PDC_BUFFER_SIZE); + + UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); + UART_PUT_RNCR(port, PDC_BUFFER_SIZE); + + return 0; +} + /* * tasklet handling tty stuff outside the interrupt handler. */ @@ -867,10 +956,7 @@ static void atmel_tasklet_func(unsigned long data) /* The interrupt handler does not take the lock */ spin_lock(&port->lock); - if (atmel_use_pdc_tx(port)) - atmel_tx_pdc(port); - else - atmel_tx_chars(port); + atmel_port->schedule_tx(port); status = atmel_port->irq_status; status_change = status ^ atmel_port->irq_status_prev; @@ -892,14 +978,36 @@ static void atmel_tasklet_func(unsigned long data) atmel_port->irq_status_prev = status; } - if (atmel_use_pdc_rx(port)) - atmel_rx_from_pdc(port); - else - atmel_rx_from_ring(port); + atmel_port->schedule_rx(port); spin_unlock(&port->lock); } +static void atmel_set_ops(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_pdc_rx(port)) { + atmel_port->prepare_rx = &atmel_prepare_rx_pdc; + atmel_port->schedule_rx = &atmel_rx_from_pdc; + atmel_port->release_rx = &atmel_release_rx_pdc; + } else { + atmel_port->prepare_rx = NULL; + atmel_port->schedule_rx = &atmel_rx_from_ring; + atmel_port->release_rx = NULL; + } + + if (atmel_use_pdc_tx(port)) { + atmel_port->prepare_tx = &atmel_prepare_tx_pdc; + atmel_port->schedule_tx = &atmel_tx_pdc; + atmel_port->release_tx = &atmel_release_tx_pdc; + } else { + atmel_port->prepare_tx = NULL; + atmel_port->schedule_tx = &atmel_tx_chars; + atmel_port->release_tx = NULL; + } +} + /* * Perform initialization and enable port for reception */ @@ -929,53 +1037,17 @@ static int atmel_startup(struct uart_port *port) /* * Initialize DMA (if necessary) */ - if (atmel_use_pdc_rx(port)) { - int i; - - for (i = 0; i < 2; i++) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; - - pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); - if (pdc->buf == NULL) { - if (i != 0) { - dma_unmap_single(port->dev, - atmel_port->pdc_rx[0].dma_addr, - PDC_BUFFER_SIZE, - DMA_FROM_DEVICE); - kfree(atmel_port->pdc_rx[0].buf); - } - free_irq(port->irq, port); - return -ENOMEM; - } - pdc->dma_addr = dma_map_single(port->dev, - pdc->buf, - PDC_BUFFER_SIZE, - DMA_FROM_DEVICE); - pdc->dma_size = PDC_BUFFER_SIZE; - pdc->ofs = 0; - } - - atmel_port->pdc_rx_idx = 0; - - UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); - UART_PUT_RCR(port, PDC_BUFFER_SIZE); - - UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); - UART_PUT_RNCR(port, PDC_BUFFER_SIZE); + if (atmel_port->prepare_rx) { + retval = atmel_port->prepare_rx(port); + if (retval < 0) + atmel_set_ops(port); } - if (atmel_use_pdc_tx(port)) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - struct circ_buf *xmit = &port->state->xmit; - pdc->buf = xmit->buf; - pdc->dma_addr = dma_map_single(port->dev, - pdc->buf, - UART_XMIT_SIZE, - DMA_TO_DEVICE); - pdc->dma_size = UART_XMIT_SIZE; - pdc->ofs = 0; + if (atmel_port->prepare_tx) { + retval = atmel_port->prepare_tx(port); + if (retval < 0) + atmel_set_ops(port); } - /* * If there is a specific "open" function (to register * control line interrupts) @@ -1030,27 +1102,10 @@ static void atmel_shutdown(struct uart_port *port) /* * Shut-down the DMA. */ - if (atmel_use_pdc_rx(port)) { - int i; - - for (i = 0; i < 2; i++) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; - - dma_unmap_single(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_FROM_DEVICE); - kfree(pdc->buf); - } - } - if (atmel_use_pdc_tx(port)) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - - dma_unmap_single(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_TO_DEVICE); - } + if (atmel_port->release_rx) + atmel_port->release_rx(port); + if (atmel_port->release_tx) + atmel_port->release_tx(port); /* * Disable all interrupts, port and break condition. @@ -1473,6 +1528,8 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, atmel_port->rs485 = pdata->rs485; } + atmel_set_ops(port); + port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; port->ops = &atmel_pops; -- cgit v0.10.2 From 08f738be88bb7a0163afd810a19b9cb13c79808f Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:26 +0800 Subject: serial: at91: add tx dma support Request a slave dma channel for tx dma use. Tx dma will setup a single transfer, when transfer complete, it will call atmel_complete_tx_dma to do finish stuff. Signed-off-by: Elen Song Signed-off-by: Ludovic Desroches Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index b56123d..13c1d31 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -143,9 +143,15 @@ struct atmel_uart_port { short pdc_rx_idx; /* current PDC RX buffer */ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ + bool use_dma_tx; /* enable DMA transmitter */ bool use_pdc_tx; /* enable PDC transmitter */ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ + spinlock_t lock_tx; /* port lock */ + struct dma_chan *chan_tx; + struct dma_async_tx_descriptor *desc_tx; + dma_cookie_t cookie_tx; + struct scatterlist sg_tx; struct tasklet_struct tasklet; unsigned int irq_status; unsigned int irq_status_prev; @@ -211,6 +217,13 @@ static bool atmel_use_pdc_tx(struct uart_port *port) } #endif +static bool atmel_use_dma_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_tx; +} + /* Enable or disable the rs485 support */ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) { @@ -569,6 +582,182 @@ static void atmel_tx_chars(struct uart_port *port) UART_PUT_IER(port, atmel_port->tx_done_mask); } +static void atmel_complete_tx_dma(void *arg) +{ + struct atmel_uart_port *atmel_port = arg; + struct uart_port *port = &atmel_port->uart; + struct circ_buf *xmit = &port->state->xmit; + struct dma_chan *chan = atmel_port->chan_tx; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + if (chan) + dmaengine_terminate_all(chan); + xmit->tail += sg_dma_len(&atmel_port->sg_tx); + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += sg_dma_len(&atmel_port->sg_tx); + + spin_lock_irq(&atmel_port->lock_tx); + async_tx_ack(atmel_port->desc_tx); + atmel_port->cookie_tx = -EINVAL; + atmel_port->desc_tx = NULL; + spin_unlock_irq(&atmel_port->lock_tx); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* Do we really need this? */ + if (!uart_circ_empty(xmit)) + tasklet_schedule(&atmel_port->tasklet); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void atmel_release_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct dma_chan *chan = atmel_port->chan_tx; + + if (chan) { + dmaengine_terminate_all(chan); + dma_release_channel(chan); + dma_unmap_sg(port->dev, &atmel_port->sg_tx, 1, + DMA_MEM_TO_DEV); + } + + atmel_port->desc_tx = NULL; + atmel_port->chan_tx = NULL; + atmel_port->cookie_tx = -EINVAL; +} + +/* + * Called from tasklet with TXRDY interrupt is disabled. + */ +static void atmel_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *xmit = &port->state->xmit; + struct dma_chan *chan = atmel_port->chan_tx; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sg = &atmel_port->sg_tx; + + /* Make sure we have an idle channel */ + if (atmel_port->desc_tx != NULL) + return; + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { + /* + * DMA is idle now. + * Port xmit buffer is already mapped, + * and it is one page... Just adjust + * offsets and lengths. Since it is a circular buffer, + * we have to transmit till the end, and then the rest. + * Take the port lock to get a + * consistent xmit buffer state. + */ + sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); + sg_dma_address(sg) = (sg_dma_address(sg) & + ~(UART_XMIT_SIZE - 1)) + + sg->offset; + sg_dma_len(sg) = CIRC_CNT_TO_END(xmit->head, + xmit->tail, + UART_XMIT_SIZE); + BUG_ON(!sg_dma_len(sg)); + + desc = dmaengine_prep_slave_sg(chan, + sg, + 1, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); + if (!desc) { + dev_err(port->dev, "Failed to send via dma!\n"); + return; + } + + dma_sync_sg_for_device(port->dev, sg, 1, DMA_MEM_TO_DEV); + + atmel_port->desc_tx = desc; + desc->callback = atmel_complete_tx_dma; + desc->callback_param = atmel_port; + atmel_port->cookie_tx = dmaengine_submit(desc); + + } else { + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static int atmel_prepare_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + dma_cap_mask_t mask; + struct dma_slave_config config; + int ret, nent; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx"); + if (atmel_port->chan_tx == NULL) + goto chan_err; + dev_info(port->dev, "using %s for tx DMA transfers\n", + dma_chan_name(atmel_port->chan_tx)); + + spin_lock_init(&atmel_port->lock_tx); + sg_init_table(&atmel_port->sg_tx, 1); + /* UART circular tx buffer is an aligned page. */ + BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); + sg_set_page(&atmel_port->sg_tx, + virt_to_page(port->state->xmit.buf), + UART_XMIT_SIZE, + (int)port->state->xmit.buf & ~PAGE_MASK); + nent = dma_map_sg(port->dev, + &atmel_port->sg_tx, + 1, + DMA_MEM_TO_DEV); + + if (!nent) { + dev_dbg(port->dev, "need to release resource of dma\n"); + goto chan_err; + } else { + dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, + sg_dma_len(&atmel_port->sg_tx), + port->state->xmit.buf, + sg_dma_address(&atmel_port->sg_tx)); + } + + /* Configure the slave DMA */ + memset(&config, 0, sizeof(config)); + config.direction = DMA_MEM_TO_DEV; + config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + config.dst_addr = port->mapbase + ATMEL_US_THR; + + ret = dmaengine_device_control(atmel_port->chan_tx, + DMA_SLAVE_CONFIG, + (unsigned long)&config); + if (ret) { + dev_err(port->dev, "DMA tx slave configuration failed\n"); + goto chan_err; + } + + return 0; + +chan_err: + dev_err(port->dev, "TX channel not available, switch to pio\n"); + atmel_port->use_dma_tx = 0; + if (atmel_port->chan_tx) + atmel_release_tx_dma(port); + return -EINVAL; +} + /* * receive interrupt handler. */ @@ -997,7 +1186,11 @@ static void atmel_set_ops(struct uart_port *port) atmel_port->release_rx = NULL; } - if (atmel_use_pdc_tx(port)) { + if (atmel_use_dma_tx(port)) { + atmel_port->prepare_tx = &atmel_prepare_tx_dma; + atmel_port->schedule_tx = &atmel_tx_dma; + atmel_port->release_tx = &atmel_release_tx_dma; + } else if (atmel_use_pdc_tx(port)) { atmel_port->prepare_tx = &atmel_prepare_tx_pdc; atmel_port->schedule_tx = &atmel_tx_pdc; atmel_port->release_tx = &atmel_release_tx_pdc; @@ -1488,10 +1681,18 @@ static void atmel_of_init_port(struct atmel_uart_port *atmel_port, else atmel_port->use_pdc_rx = false; - if (of_get_property(np, "atmel,use-dma-tx", NULL)) - atmel_port->use_pdc_tx = true; - else + if (of_get_property(np, "atmel,use-dma-tx", NULL)) { + if (of_get_property(np, "dmas", NULL)) { + atmel_port->use_dma_tx = true; + atmel_port->use_pdc_tx = false; + } else { + atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = true; + } + } else { + atmel_port->use_dma_tx = false; atmel_port->use_pdc_tx = false; + } /* rs485 properties */ if (of_property_read_u32_array(np, "rs485-rts-delay", @@ -1525,6 +1726,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, } else { atmel_port->use_pdc_rx = pdata->use_dma_rx; atmel_port->use_pdc_tx = pdata->use_dma_tx; + atmel_port->use_dma_tx = false; atmel_port->rs485 = pdata->rs485; } -- cgit v0.10.2 From 34df42f59a602241b416001516d53fcfe35072b2 Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:27 +0800 Subject: serial: at91: add rx dma support Request a cyclic dma channel for rx dma use. Use cyclic transfer is to prevent receive data overrun. We allocate a cycle dma cookie after request channel, after that, enable uart timeout interrupt in startup stage, when data successful received, the timeout callback will check the residual bytes and insert receiving datas into the framework during the transfer interval. When current descriptor finished, the dma callback will also check the residual bytes and filp the receiving data. Signed-off-by: Elen Song Signed-off-by: Ludovic Desroches Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 13c1d31..eaf7dc7 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -139,6 +139,7 @@ struct atmel_uart_port { u32 backup_imr; /* IMR saved during suspend */ int break_active; /* break being received */ + bool use_dma_rx; /* enable DMA receiver */ bool use_pdc_rx; /* enable PDC receiver */ short pdc_rx_idx; /* current PDC RX buffer */ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ @@ -148,10 +149,15 @@ struct atmel_uart_port { struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ spinlock_t lock_tx; /* port lock */ + spinlock_t lock_rx; /* port lock */ struct dma_chan *chan_tx; + struct dma_chan *chan_rx; struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; dma_cookie_t cookie_tx; + dma_cookie_t cookie_rx; struct scatterlist sg_tx; + struct scatterlist sg_rx; struct tasklet_struct tasklet; unsigned int irq_status; unsigned int irq_status_prev; @@ -224,6 +230,13 @@ static bool atmel_use_dma_tx(struct uart_port *port) return atmel_port->use_dma_tx; } +static bool atmel_use_dma_rx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_rx; +} + /* Enable or disable the rs485 support */ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) { @@ -758,6 +771,184 @@ chan_err: return -EINVAL; } +static void atmel_flip_buffer_rx_dma(struct uart_port *port, + char *buf, size_t count) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct tty_port *tport = &port->state->port; + + dma_sync_sg_for_cpu(port->dev, + &atmel_port->sg_rx, + 1, + DMA_DEV_TO_MEM); + + tty_insert_flip_string(tport, buf, count); + + dma_sync_sg_for_device(port->dev, + &atmel_port->sg_rx, + 1, + DMA_DEV_TO_MEM); + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static void atmel_complete_rx_dma(void *arg) +{ + struct uart_port *port = arg; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + tasklet_schedule(&atmel_port->tasklet); +} + +static void atmel_release_rx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct dma_chan *chan = atmel_port->chan_rx; + + if (chan) { + dmaengine_terminate_all(chan); + dma_release_channel(chan); + dma_unmap_sg(port->dev, &atmel_port->sg_rx, 1, + DMA_DEV_TO_MEM); + } + + atmel_port->desc_rx = NULL; + atmel_port->chan_rx = NULL; + atmel_port->cookie_rx = -EINVAL; +} + +static void atmel_rx_from_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *ring = &atmel_port->rx_ring; + struct dma_chan *chan = atmel_port->chan_rx; + struct dma_tx_state state; + enum dma_status dmastat; + size_t pending, count; + + + /* Reset the UART timeout early so that we don't miss one */ + UART_PUT_CR(port, ATMEL_US_STTTO); + dmastat = dmaengine_tx_status(chan, + atmel_port->cookie_rx, + &state); + /* Restart a new tasklet if DMA status is error */ + if (dmastat == DMA_ERROR) { + dev_dbg(port->dev, "Get residue error, restart tasklet\n"); + UART_PUT_IER(port, ATMEL_US_TIMEOUT); + tasklet_schedule(&atmel_port->tasklet); + return; + } + /* current transfer size should no larger than dma buffer */ + pending = sg_dma_len(&atmel_port->sg_rx) - state.residue; + BUG_ON(pending > sg_dma_len(&atmel_port->sg_rx)); + + /* + * This will take the chars we have so far, + * ring->head will record the transfer size, only new bytes come + * will insert into the framework. + */ + if (pending > ring->head) { + count = pending - ring->head; + + atmel_flip_buffer_rx_dma(port, ring->buf + ring->head, count); + + ring->head += count; + if (ring->head == sg_dma_len(&atmel_port->sg_rx)) + ring->head = 0; + + port->icount.rx += count; + } + + UART_PUT_IER(port, ATMEL_US_TIMEOUT); +} + +static int atmel_prepare_rx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct dma_async_tx_descriptor *desc; + dma_cap_mask_t mask; + struct dma_slave_config config; + struct circ_buf *ring; + int ret, nent; + + ring = &atmel_port->rx_ring; + + dma_cap_zero(mask); + dma_cap_set(DMA_CYCLIC, mask); + + atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx"); + if (atmel_port->chan_rx == NULL) + goto chan_err; + dev_info(port->dev, "using %s for rx DMA transfers\n", + dma_chan_name(atmel_port->chan_rx)); + + spin_lock_init(&atmel_port->lock_rx); + sg_init_table(&atmel_port->sg_rx, 1); + /* UART circular rx buffer is an aligned page. */ + BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); + sg_set_page(&atmel_port->sg_rx, + virt_to_page(ring->buf), + ATMEL_SERIAL_RINGSIZE, + (int)ring->buf & ~PAGE_MASK); + nent = dma_map_sg(port->dev, + &atmel_port->sg_rx, + 1, + DMA_DEV_TO_MEM); + + if (!nent) { + dev_dbg(port->dev, "need to release resource of dma\n"); + goto chan_err; + } else { + dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, + sg_dma_len(&atmel_port->sg_rx), + ring->buf, + sg_dma_address(&atmel_port->sg_rx)); + } + + /* Configure the slave DMA */ + memset(&config, 0, sizeof(config)); + config.direction = DMA_DEV_TO_MEM; + config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + config.src_addr = port->mapbase + ATMEL_US_RHR; + + ret = dmaengine_device_control(atmel_port->chan_rx, + DMA_SLAVE_CONFIG, + (unsigned long)&config); + if (ret) { + dev_err(port->dev, "DMA rx slave configuration failed\n"); + goto chan_err; + } + /* + * Prepare a cyclic dma transfer, assign 2 descriptors, + * each one is half ring buffer size + */ + desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx, + sg_dma_address(&atmel_port->sg_rx), + sg_dma_len(&atmel_port->sg_rx), + sg_dma_len(&atmel_port->sg_rx)/2, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + desc->callback = atmel_complete_rx_dma; + desc->callback_param = port; + atmel_port->desc_rx = desc; + atmel_port->cookie_rx = dmaengine_submit(desc); + + return 0; + +chan_err: + dev_err(port->dev, "RX channel not available, switch to pio\n"); + atmel_port->use_dma_rx = 0; + if (atmel_port->chan_rx) + atmel_release_rx_dma(port); + return -EINVAL; +} + /* * receive interrupt handler. */ @@ -785,6 +976,13 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending) atmel_pdc_rxerr(port, pending); } + if (atmel_use_dma_rx(port)) { + if (pending & ATMEL_US_TIMEOUT) { + UART_PUT_IDR(port, ATMEL_US_TIMEOUT); + tasklet_schedule(&atmel_port->tasklet); + } + } + /* Interrupt receive */ if (pending & ATMEL_US_RXRDY) atmel_rx_chars(port); @@ -1176,7 +1374,11 @@ static void atmel_set_ops(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_pdc_rx(port)) { + if (atmel_use_dma_rx(port)) { + atmel_port->prepare_rx = &atmel_prepare_rx_dma; + atmel_port->schedule_rx = &atmel_rx_from_dma; + atmel_port->release_rx = &atmel_release_rx_dma; + } else if (atmel_use_pdc_rx(port)) { atmel_port->prepare_rx = &atmel_prepare_rx_pdc; atmel_port->schedule_rx = &atmel_rx_from_pdc; atmel_port->release_rx = &atmel_release_rx_pdc; @@ -1272,6 +1474,11 @@ static int atmel_startup(struct uart_port *port) UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); /* enable PDC controller */ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); + } else if (atmel_use_dma_rx(port)) { + UART_PUT_RTOR(port, PDC_RX_TIMEOUT); + UART_PUT_CR(port, ATMEL_US_STTTO); + + UART_PUT_IER(port, ATMEL_US_TIMEOUT); } else { /* enable receive only */ UART_PUT_IER(port, ATMEL_US_RXRDY); @@ -1676,10 +1883,18 @@ static void atmel_of_init_port(struct atmel_uart_port *atmel_port, u32 rs485_delay[2]; /* DMA/PDC usage specification */ - if (of_get_property(np, "atmel,use-dma-rx", NULL)) - atmel_port->use_pdc_rx = true; - else + if (of_get_property(np, "atmel,use-dma-rx", NULL)) { + if (of_get_property(np, "dmas", NULL)) { + atmel_port->use_dma_rx = true; + atmel_port->use_pdc_rx = false; + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = true; + } + } else { + atmel_port->use_dma_rx = false; atmel_port->use_pdc_rx = false; + } if (of_get_property(np, "atmel,use-dma-tx", NULL)) { if (of_get_property(np, "dmas", NULL)) { @@ -1726,6 +1941,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, } else { atmel_port->use_pdc_rx = pdata->use_dma_rx; atmel_port->use_pdc_tx = pdata->use_dma_tx; + atmel_port->use_dma_rx = false; atmel_port->use_dma_tx = false; atmel_port->rs485 = pdata->rs485; } -- cgit v0.10.2 From 33d64c4ffab7da36d657a35fe2b494d5c971f615 Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:28 +0800 Subject: serial: at91: support run time switch transfer mode We will switch to pio mode when request of dma or pdc fail. But soon or later, when the request is success, the transfer mode can switch to them at next open serial port action. So in startup stage, we should get original transfer mode. Signed-off-by: Elen Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index eaf7dc7..1db6871 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1370,6 +1370,80 @@ static void atmel_tasklet_func(unsigned long data) spin_unlock(&port->lock); } +static int atmel_init_property(struct atmel_uart_port *atmel_port, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct atmel_uart_data *pdata = pdev->dev.platform_data; + + if (np) { + /* DMA/PDC usage specification */ + if (of_get_property(np, "atmel,use-dma-rx", NULL)) { + if (of_get_property(np, "dmas", NULL)) { + atmel_port->use_dma_rx = true; + atmel_port->use_pdc_rx = false; + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = true; + } + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = false; + } + + if (of_get_property(np, "atmel,use-dma-tx", NULL)) { + if (of_get_property(np, "dmas", NULL)) { + atmel_port->use_dma_tx = true; + atmel_port->use_pdc_tx = false; + } else { + atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = true; + } + } else { + atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = false; + } + + } else { + atmel_port->use_pdc_rx = pdata->use_dma_rx; + atmel_port->use_pdc_tx = pdata->use_dma_tx; + atmel_port->use_dma_rx = false; + atmel_port->use_dma_tx = false; + } + + return 0; +} + +static void atmel_init_rs485(struct atmel_uart_port *atmel_port, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct atmel_uart_data *pdata = pdev->dev.platform_data; + + if (np) { + u32 rs485_delay[2]; + /* rs485 properties */ + if (of_property_read_u32_array(np, "rs485-rts-delay", + rs485_delay, 2) == 0) { + struct serial_rs485 *rs485conf = &atmel_port->rs485; + + rs485conf->delay_rts_before_send = rs485_delay[0]; + rs485conf->delay_rts_after_send = rs485_delay[1]; + rs485conf->flags = 0; + + if (of_get_property(np, "rs485-rx-during-tx", NULL)) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (of_get_property(np, "linux,rs485-enabled-at-boot-time", + NULL)) + rs485conf->flags |= SER_RS485_ENABLED; + } + } else { + atmel_port->rs485 = pdata->rs485; + } + +} + static void atmel_set_ops(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); @@ -1408,6 +1482,7 @@ static void atmel_set_ops(struct uart_port *port) */ static int atmel_startup(struct uart_port *port) { + struct platform_device *pdev = to_platform_device(port->dev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); struct tty_struct *tty = port->state->port.tty; int retval; @@ -1432,6 +1507,8 @@ static int atmel_startup(struct uart_port *port) /* * Initialize DMA (if necessary) */ + atmel_init_property(atmel_port, pdev); + if (atmel_port->prepare_rx) { retval = atmel_port->prepare_rx(port); if (retval < 0) @@ -1877,55 +1954,6 @@ static struct uart_ops atmel_pops = { #endif }; -static void atmel_of_init_port(struct atmel_uart_port *atmel_port, - struct device_node *np) -{ - u32 rs485_delay[2]; - - /* DMA/PDC usage specification */ - if (of_get_property(np, "atmel,use-dma-rx", NULL)) { - if (of_get_property(np, "dmas", NULL)) { - atmel_port->use_dma_rx = true; - atmel_port->use_pdc_rx = false; - } else { - atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = true; - } - } else { - atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = false; - } - - if (of_get_property(np, "atmel,use-dma-tx", NULL)) { - if (of_get_property(np, "dmas", NULL)) { - atmel_port->use_dma_tx = true; - atmel_port->use_pdc_tx = false; - } else { - atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = true; - } - } else { - atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = false; - } - - /* rs485 properties */ - if (of_property_read_u32_array(np, "rs485-rts-delay", - rs485_delay, 2) == 0) { - struct serial_rs485 *rs485conf = &atmel_port->rs485; - - rs485conf->delay_rts_before_send = rs485_delay[0]; - rs485conf->delay_rts_after_send = rs485_delay[1]; - rs485conf->flags = 0; - - if (of_get_property(np, "rs485-rx-during-tx", NULL)) - rs485conf->flags |= SER_RS485_RX_DURING_TX; - - if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL)) - rs485conf->flags |= SER_RS485_ENABLED; - } -} - /* * Configure the port from the platform device resource info. */ @@ -1936,17 +1964,10 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, struct uart_port *port = &atmel_port->uart; struct atmel_uart_data *pdata = pdev->dev.platform_data; - if (pdev->dev.of_node) { - atmel_of_init_port(atmel_port, pdev->dev.of_node); - } else { - atmel_port->use_pdc_rx = pdata->use_dma_rx; - atmel_port->use_pdc_tx = pdata->use_dma_tx; - atmel_port->use_dma_rx = false; - atmel_port->use_dma_tx = false; - atmel_port->rs485 = pdata->rs485; - } + if (!atmel_init_property(atmel_port, pdev)) + atmel_set_ops(port); - atmel_set_ops(port); + atmel_init_rs485(atmel_port, pdev); port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; -- cgit v0.10.2 From 055560b04a8cd063aea916fd083b7aec02c2adb8 Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:29 +0800 Subject: serial: at91: distinguish usart and uart Distinguish usart and uart by read ip name register, The usart read name is "USAR", The uart and dbgu read name is "DBGU". Signed-off-by: Elen Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 1db6871..8dbc3e6 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -97,6 +97,7 @@ static void atmel_stop_rx(struct uart_port *port); #define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) #define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) #define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) +#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME) /* PDC registers */ #define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) @@ -166,6 +167,7 @@ struct atmel_uart_port { struct serial_rs485 rs485; /* rs485 settings */ unsigned int tx_done_mask; + bool is_usart; /* usart or uart */ int (*prepare_rx)(struct uart_port *port); int (*prepare_tx)(struct uart_port *port); void (*schedule_rx)(struct uart_port *port); @@ -1478,6 +1480,34 @@ static void atmel_set_ops(struct uart_port *port) } /* + * Get ip name usart or uart + */ +static int atmel_get_ip_name(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int name = UART_GET_IP_NAME(port); + int usart, uart; + /* usart and uart ascii */ + usart = 0x55534152; + uart = 0x44424755; + + atmel_port->is_usart = false; + + if (name == usart) { + dev_dbg(port->dev, "This is usart\n"); + atmel_port->is_usart = true; + } else if (name == uart) { + dev_dbg(port->dev, "This is uart\n"); + atmel_port->is_usart = false; + } else { + dev_err(port->dev, "Not supported ip name, set to uart\n"); + return -EINVAL; + } + + return 0; +} + +/* * Perform initialization and enable port for reception */ static int atmel_startup(struct uart_port *port) @@ -2336,6 +2366,13 @@ static int atmel_serial_probe(struct platform_device *pdev) UART_PUT_CR(&port->uart, ATMEL_US_RTSEN); } + /* + * Get port name of usart or uart + */ + ret = atmel_get_ip_name(&port->uart); + if (ret < 0) + goto err_add_port; + return 0; err_add_port: diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h index fd68337..be201ca 100644 --- a/include/linux/atmel_serial.h +++ b/include/linux/atmel_serial.h @@ -124,4 +124,6 @@ #define ATMEL_US_NER 0x44 /* Number of Errors Register */ #define ATMEL_US_IF 0x4c /* IrDA Filter Register */ +#define ATMEL_US_NAME 0xf0 /* Ip Name */ + #endif -- cgit v0.10.2 From 2e68c22fde9b001e41d47185a5b7612da60d8c33 Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:30 +0800 Subject: serial: at91: make UART support dma and pdc transfers Because the UART lack of receive timeout register, so we use a timer to trigger data receive. The DBGU is regarded as UART. Signed-off-by: Elen Song Signed-off-by: Ludovic Desroches Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 8dbc3e6..7e2cb31 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -168,6 +169,7 @@ struct atmel_uart_port { struct serial_rs485 rs485; /* rs485 settings */ unsigned int tx_done_mask; bool is_usart; /* usart or uart */ + struct timer_list uart_timer; /* uart timer */ int (*prepare_rx)(struct uart_port *port); int (*prepare_tx)(struct uart_port *port); void (*schedule_rx)(struct uart_port *port); @@ -822,6 +824,9 @@ static void atmel_release_rx_dma(struct uart_port *port) atmel_port->desc_rx = NULL; atmel_port->chan_rx = NULL; atmel_port->cookie_rx = -EINVAL; + + if (!atmel_port->is_usart) + del_timer_sync(&atmel_port->uart_timer); } static void atmel_rx_from_dma(struct uart_port *port) @@ -951,6 +956,15 @@ chan_err: return -EINVAL; } +static void atmel_uart_timer_callback(unsigned long data) +{ + struct uart_port *port = (void *)data; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + tasklet_schedule(&atmel_port->tasklet); + mod_timer(&atmel_port->uart_timer, jiffies + uart_poll_timeout(port)); +} + /* * receive interrupt handler. */ @@ -1214,6 +1228,9 @@ static void atmel_release_rx_pdc(struct uart_port *port) DMA_FROM_DEVICE); kfree(pdc->buf); } + + if (!atmel_port->is_usart) + del_timer_sync(&atmel_port->uart_timer); } static void atmel_rx_from_pdc(struct uart_port *port) @@ -1575,17 +1592,36 @@ static int atmel_startup(struct uart_port *port) if (atmel_use_pdc_rx(port)) { /* set UART timeout */ - UART_PUT_RTOR(port, PDC_RX_TIMEOUT); - UART_PUT_CR(port, ATMEL_US_STTTO); + if (!atmel_port->is_usart) { + setup_timer(&atmel_port->uart_timer, + atmel_uart_timer_callback, + (unsigned long)port); + mod_timer(&atmel_port->uart_timer, + jiffies + uart_poll_timeout(port)); + /* set USART timeout */ + } else { + UART_PUT_RTOR(port, PDC_RX_TIMEOUT); + UART_PUT_CR(port, ATMEL_US_STTTO); - UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); + } /* enable PDC controller */ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); } else if (atmel_use_dma_rx(port)) { - UART_PUT_RTOR(port, PDC_RX_TIMEOUT); - UART_PUT_CR(port, ATMEL_US_STTTO); + /* set UART timeout */ + if (!atmel_port->is_usart) { + setup_timer(&atmel_port->uart_timer, + atmel_uart_timer_callback, + (unsigned long)port); + mod_timer(&atmel_port->uart_timer, + jiffies + uart_poll_timeout(port)); + /* set USART timeout */ + } else { + UART_PUT_RTOR(port, PDC_RX_TIMEOUT); + UART_PUT_CR(port, ATMEL_US_STTTO); - UART_PUT_IER(port, ATMEL_US_TIMEOUT); + UART_PUT_IER(port, ATMEL_US_TIMEOUT); + } } else { /* enable receive only */ UART_PUT_IER(port, ATMEL_US_RXRDY); -- cgit v0.10.2 From e469719344ae1cdde90a4c8c3746588f8c86f6cf Mon Sep 17 00:00:00 2001 From: Elen Song Date: Mon, 22 Jul 2013 16:30:31 +0800 Subject: serial: at91: add dma support in usart binding descriptions Signed-off-by: Elen Song Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt index a49d9a1..2191dcb 100644 --- a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt @@ -10,13 +10,18 @@ Required properties: Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data +- add dma bindings for dma transfer: + - dmas: DMA specifier, consisting of a phandle to DMA controller node, + memory peripheral interface and USART DMA channel ID, FIFO configuration. + Refer to dma.txt and atmel-dma.txt for details. + - dma-names: "rx" for RX channel, "tx" for TX channel. compatible description: - at91rm9200: legacy USART support - at91sam9260: generic USART implementation for SAM9 SoCs Example: - +- use PDC: usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x4000>; @@ -25,3 +30,14 @@ Example: atmel,use-dma-tx; }; +- use DMA: + usart0: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + interrupts = <12 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + dmas = <&dma0 2 0x3>, + <&dma0 2 0x204>; + dma-names = "tx", "rx"; + }; -- cgit v0.10.2 From e26439ce03f0808f5d797ca33f180fdb8258335a Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Mon, 29 Jul 2013 15:15:07 -0700 Subject: serial: pch_uart: Fix signed-ness and casting of uartclk related fields Storing one struct per known board would be overkill. Pre-cast the driver_data pointer to an unsigned long to avoid the pointer to int compiler warning: drivers/tty/serial/pch_uart.c:431:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Unify the signed-ness of the baud and uartclk types throughout the driver. Signed-off-by: Darren Hart Reported-by: kbuild test robot Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index bc0aa08..5040c51 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -232,7 +232,7 @@ struct eg20t_port { unsigned int iobase; struct pci_dev *pdev; int fifo_size; - int uartclk; + unsigned int uartclk; int start_tx; int start_rx; int tx_empty; @@ -419,7 +419,7 @@ static struct dmi_system_id pch_uart_dmi_table[] = { }; /* Return UART clock, checking for board specific clocks. */ -static int pch_uart_get_uartclk(void) +static unsigned int pch_uart_get_uartclk(void) { const struct dmi_system_id *d; @@ -428,7 +428,7 @@ static int pch_uart_get_uartclk(void) d = dmi_first_match(pch_uart_dmi_table); if (d) - return (int)d->driver_data; + return (unsigned long)d->driver_data; return DEFAULT_UARTCLK; } @@ -449,7 +449,7 @@ static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv, iowrite8(ier, priv->membase + UART_IER); } -static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, +static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud, unsigned int parity, unsigned int bits, unsigned int stb) { @@ -484,7 +484,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, lcr |= bits; lcr |= stb; - dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", + dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n", __func__, baud, div, lcr, jiffies); iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); iowrite8(dll, priv->membase + PCH_UART_DLL); @@ -1390,9 +1390,8 @@ static void pch_uart_shutdown(struct uart_port *port) static void pch_uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - int baud; int rtn; - unsigned int parity, bits, stb; + unsigned int baud, parity, bits, stb; struct eg20t_port *priv; unsigned long flags; -- cgit v0.10.2 From 574de559c1797618fd8ed03576837eb3113c5d26 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 30 Jul 2013 17:06:57 +0900 Subject: serial: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 86c00b1..570df9d 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -3062,7 +3062,7 @@ void serial8250_resume_port(int line) */ static int serial8250_probe(struct platform_device *dev) { - struct plat_serial8250_port *p = dev->dev.platform_data; + struct plat_serial8250_port *p = dev_get_platdata(&dev->dev); struct uart_8250_port uart; int ret, i, irqflag = 0; diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index c6bdb94..2299a34 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -408,7 +408,8 @@ static struct uart_driver altera_jtaguart_driver = { static int altera_jtaguart_probe(struct platform_device *pdev) { - struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; + struct altera_jtaguart_platform_uart *platp = + dev_get_platdata(&pdev->dev); struct uart_port *port; struct resource *res_irq, *res_mem; int i = pdev->id; diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 1d46966..fa638db 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -534,7 +534,7 @@ static int altera_uart_get_of_uartclk(struct platform_device *pdev, static int altera_uart_probe(struct platform_device *pdev) { - struct altera_uart_platform_uart *platp = pdev->dev.platform_data; + struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev); struct uart_port *port; struct resource *res_mem; struct resource *res_irq; diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index c368405..8b90f0b 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -721,7 +721,7 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id) uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = i; uap->dev = dev; - uap->data = dev->dev.platform_data; + uap->data = dev_get_platdata(&dev->dev); amba_ports[i] = uap; diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 28b35ad..eb38fb8 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -265,7 +265,7 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg, static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap) { /* DMA is the sole user of the platform data right now */ - struct amba_pl011_data *plat = uap->port.dev->platform_data; + struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); struct dma_slave_config tx_conf = { .dst_addr = uap->port.mapbase + UART01x_DR, .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, @@ -1497,10 +1497,10 @@ static int pl011_hwinit(struct uart_port *port) uap->im = readw(uap->port.membase + UART011_IMSC); writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC); - if (uap->port.dev->platform_data) { + if (dev_get_platdata(uap->port.dev)) { struct amba_pl011_data *plat; - plat = uap->port.dev->platform_data; + plat = dev_get_platdata(uap->port.dev); if (plat->init) plat->init(); } @@ -1645,10 +1645,10 @@ static void pl011_shutdown(struct uart_port *port) /* Optionally let pins go into sleep states */ pinctrl_pm_select_sleep_state(port->dev); - if (uap->port.dev->platform_data) { + if (dev_get_platdata(uap->port.dev)) { struct amba_pl011_data *plat; - plat = uap->port.dev->platform_data; + plat = dev_get_platdata(uap->port.dev); if (plat->exit) plat->exit(); } @@ -2002,10 +2002,10 @@ static int __init pl011_console_setup(struct console *co, char *options) if (ret) return ret; - if (uap->port.dev->platform_data) { + if (dev_get_platdata(uap->port.dev)) { struct amba_pl011_data *plat; - plat = uap->port.dev->platform_data; + plat = dev_get_platdata(uap->port.dev); if (plat->init) plat->init(); } diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 9824dfb..7aa9062 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -629,7 +629,7 @@ static int ar933x_uart_probe(struct platform_device *pdev) int id; int ret; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); if (!pdata) return -EINVAL; diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index cbf1d15..2f195f0 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -528,7 +528,7 @@ arc_uart_init_one(struct platform_device *pdev, int dev_id) unsigned long *plat_data; struct arc_uart_port *uart = &arc_uart_ports[dev_id]; - plat_data = ((unsigned long *)(pdev->dev.platform_data)); + plat_data = (unsigned long *)dev_get_platdata(&pdev->dev); if (!plat_data) return -ENODEV; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 7e2cb31..d067285 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1393,7 +1393,7 @@ static int atmel_init_property(struct atmel_uart_port *atmel_port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = pdev->dev.platform_data; + struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); if (np) { /* DMA/PDC usage specification */ @@ -1437,7 +1437,7 @@ static void atmel_init_rs485(struct atmel_uart_port *atmel_port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = pdev->dev.platform_data; + struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); if (np) { u32 rs485_delay[2]; @@ -2028,7 +2028,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, { int ret; struct uart_port *port = &atmel_port->uart; - struct atmel_uart_data *pdata = pdev->dev.platform_data; + struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); if (!atmel_init_property(atmel_port, pdev)) atmel_set_ops(port); @@ -2226,7 +2226,7 @@ static int __init atmel_console_init(void) int ret; if (atmel_default_console_device) { struct atmel_uart_data *pdata = - atmel_default_console_device->dev.platform_data; + dev_get_platdata(&atmel_default_console_device->dev); int id = pdata->num; struct atmel_uart_port *port = &atmel_ports[id]; @@ -2334,7 +2334,7 @@ static int atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *port; struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = pdev->dev.platform_data; + struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); void *data; int ret = -ENODEV; diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index 487c173..424ed36 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -766,7 +766,8 @@ static int sport_uart_probe(struct platform_device *pdev) } ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRV_NAME); + (unsigned short *)dev_get_platdata(&pdev->dev), + DRV_NAME); if (ret) { dev_err(&pdev->dev, "Fail to request SPORT peripherals\n"); @@ -843,7 +844,7 @@ out_error_unmap: iounmap(sport->port.membase); out_error_free_peripherals: peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); + (unsigned short *)dev_get_platdata(&pdev->dev)); out_error_free_mem: kfree(sport); bfin_sport_uart_ports[pdev->id] = NULL; @@ -863,7 +864,7 @@ static int sport_uart_remove(struct platform_device *pdev) uart_remove_one_port(&sport_uart_reg, &sport->port); iounmap(sport->port.membase); peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); + (unsigned short *)dev_get_platdata(&pdev->dev)); kfree(sport); bfin_sport_uart_ports[pdev->id] = NULL; } diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index 72031d7..378f3c3 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -1240,7 +1240,8 @@ static int bfin_serial_probe(struct platform_device *pdev) */ #endif ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + (unsigned short *)dev_get_platdata(&pdev->dev), + DRIVER_NAME); if (ret) { dev_err(&pdev->dev, "fail to request bfin serial peripherals\n"); @@ -1358,7 +1359,7 @@ out_error_unmap: iounmap(uart->port.membase); out_error_free_peripherals: peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); + (unsigned short *)dev_get_platdata(&pdev->dev)); out_error_free_mem: kfree(uart); bfin_serial_ports[pdev->id] = NULL; @@ -1377,7 +1378,7 @@ static int bfin_serial_remove(struct platform_device *pdev) uart_remove_one_port(&bfin_serial_reg, &uart->port); iounmap(uart->port.membase); peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); + (unsigned short *)dev_get_platdata(&pdev->dev)); kfree(uart); bfin_serial_ports[pdev->id] = NULL; } @@ -1432,7 +1433,7 @@ static int bfin_earlyprintk_probe(struct platform_device *pdev) } ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + (unsigned short *)dev_get_platdata(&pdev->dev), DRIVER_NAME); if (ret) { dev_err(&pdev->dev, "fail to request bfin serial peripherals\n"); @@ -1463,7 +1464,7 @@ static int bfin_earlyprintk_probe(struct platform_device *pdev) out_error_free_peripherals: peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); + (unsigned short *)dev_get_platdata(&pdev->dev)); return ret; } diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 8b1534c..af286e6 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1008,7 +1008,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) return -ENODEV; } - pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; + pl_data = (struct ifx_modem_platform_data *)dev_get_platdata(&spi->dev); if (!pl_data) { dev_err(&spi->dev, "missing platform data!"); return -ENODEV; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 90655b8..a5f32c7 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1222,7 +1222,7 @@ static int imx_startup(struct uart_port *port) if (USE_IRDA(sport)) { struct imxuart_platform_data *pdata; - pdata = sport->port.dev->platform_data; + pdata = dev_get_platdata(sport->port.dev); sport->irda_inv_rx = pdata->irda_inv_rx; sport->irda_inv_tx = pdata->irda_inv_tx; sport->trcv_delay = pdata->transceiver_delay; @@ -1265,7 +1265,7 @@ static void imx_shutdown(struct uart_port *port) if (USE_IRDA(sport)) { struct imxuart_platform_data *pdata; - pdata = sport->port.dev->platform_data; + pdata = dev_get_platdata(sport->port.dev); if (pdata->irda_enable) pdata->irda_enable(0); } @@ -1925,7 +1925,7 @@ static inline int serial_imx_probe_dt(struct imx_port *sport, static void serial_imx_probe_pdata(struct imx_port *sport, struct platform_device *pdev) { - struct imxuart_platform_data *pdata = pdev->dev.platform_data; + struct imxuart_platform_data *pdata = dev_get_platdata(&pdev->dev); sport->port.line = pdev->id; sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data; @@ -2000,7 +2000,7 @@ static int serial_imx_probe(struct platform_device *pdev) imx_ports[sport->port.line] = sport; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); if (pdata && pdata->init) { ret = pdata->init(pdev); if (ret) @@ -2024,7 +2024,7 @@ static int serial_imx_remove(struct platform_device *pdev) struct imxuart_platform_data *pdata; struct imx_port *sport = platform_get_drvdata(pdev); - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); uart_remove_one_port(&imx_reg, &sport->port); diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 35866d5..79f9a9e 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -779,7 +779,7 @@ static int max3100_probe(struct spi_device *spi) max3100s[i]->irq = spi->irq; spin_lock_init(&max3100s[i]->conf_lock); spi_set_drvdata(spi, max3100s[i]); - pdata = spi->dev.platform_data; + pdata = dev_get_platdata(&spi->dev); max3100s[i]->crystal = pdata->crystal; max3100s[i]->loopback = pdata->loopback; max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 65be0c0..a2e97c9 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -644,7 +645,7 @@ static struct uart_driver mcf_driver = { static int mcf_probe(struct platform_device *pdev) { - struct mcf_platform_uart *platp = pdev->dev.platform_data; + struct mcf_platform_uart *platp = dev_get_platdata(&pdev->dev); struct uart_port *port; int i; diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index bc24f49..fba5257 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -1884,7 +1884,7 @@ static int mpsc_shared_drv_probe(struct platform_device *dev) if (dev->id == 0) { if (!(rc = mpsc_shared_map_regs(dev))) { pdata = (struct mpsc_shared_pdata *) - dev->dev.platform_data; + dev_get_platdata(&dev->dev); mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val; mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val; @@ -2025,7 +2025,7 @@ static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi, { struct mpsc_pdata *pdata; - pdata = (struct mpsc_pdata *)pd->dev.platform_data; + pdata = (struct mpsc_pdata *)dev_get_platdata(&pd->dev); pi->port.uartclk = pdata->brg_clk_freq; pi->port.iotype = UPIO_MEM; diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 4ca2f64..48e9496 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -1618,7 +1618,7 @@ static int msm_hs_probe(struct platform_device *pdev) struct msm_hs_port *msm_uport; struct resource *resource; const struct msm_serial_hs_platform_data *pdata = - pdev->dev.platform_data; + dev_get_platdata(&pdev->dev); if (pdev->id < 0 || pdev->id >= UARTDM_NR) { printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index c77bf0c..c751706 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -200,7 +200,7 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up) static int serial_omap_get_context_loss_count(struct uart_omap_port *up) { - struct omap_uart_port_info *pdata = up->dev->platform_data; + struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); if (!pdata || !pdata->get_context_loss_count) return -EINVAL; @@ -210,7 +210,7 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) { - struct omap_uart_port_info *pdata = up->dev->platform_data; + struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); if (!pdata || !pdata->enable_wakeup) return; @@ -1409,7 +1409,7 @@ static int serial_omap_probe(struct platform_device *pdev) { struct uart_omap_port *up; struct resource *mem, *irq; - struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; + struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); int ret; if (pdev->dev.of_node) { diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 376079b..019b915 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1250,8 +1250,8 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) ourport->baudclk = ERR_PTR(-EINVAL); ourport->info = ourport->drv_data->info; - ourport->cfg = (pdev->dev.platform_data) ? - (struct s3c2410_uartcfg *)pdev->dev.platform_data : + ourport->cfg = (dev_get_platdata(&pdev->dev)) ? + (struct s3c2410_uartcfg *)dev_get_platdata(&pdev->dev) : ourport->drv_data->def_cfg; ourport->port.fifosize = (ourport->info->fifosize) ? diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c index 4b1434d..887b4f7 100644 --- a/drivers/tty/serial/sc26xx.c +++ b/drivers/tty/serial/sc26xx.c @@ -637,7 +637,7 @@ static int sc26xx_probe(struct platform_device *dev) { struct resource *res; struct uart_sc26xx_port *up; - unsigned int *sc26xx_data = dev->dev.platform_data; + unsigned int *sc26xx_data = dev_get_platdata(&dev->dev); int err; res = platform_get_resource(dev, IORESOURCE_MEM, 0); diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index fe48a0c..440a962 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -1097,7 +1097,7 @@ static void serial_txx9_unregister_port(int line) */ static int serial_txx9_probe(struct platform_device *dev) { - struct uart_port *p = dev->dev.platform_data; + struct uart_port *p = dev_get_platdata(&dev->dev); struct uart_port port; int ret, i; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7477e0e..72ca870 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2380,7 +2380,7 @@ static char early_serial_buf[32]; static int sci_probe_earlyprintk(struct platform_device *pdev) { - struct plat_sci_port *cfg = pdev->dev.platform_data; + struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev); if (early_serial_console.data) return -EEXIST; diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c index f655997..a63c14b 100644 --- a/drivers/tty/serial/vr41xx_siu.c +++ b/drivers/tty/serial/vr41xx_siu.c @@ -705,7 +705,7 @@ static int siu_init_ports(struct platform_device *pdev) { struct uart_port *port; struct resource *res; - int *type = pdev->dev.platform_data; + int *type = dev_get_platdata(&pdev->dev); int i; if (!type) -- cgit v0.10.2 From 11f1ad3ab4c2b2f208f7ef5b0360903bdf00df61 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 30 Jul 2013 16:35:20 +0200 Subject: serial/efm32-uart: don't use pdev->id to determine the port's line MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pdev->id is not a valid choice for device-tree probed devices. So use the (properly determined) line from efm32_uart_probe consistenly Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index 868dbfb..ce1ebbb 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -698,6 +698,7 @@ static int efm32_uart_probe(struct platform_device *pdev) { struct efm32_uart_port *efm_port; struct resource *res; + unsigned int line; int ret; efm_port = kzalloc(sizeof(*efm_port), GFP_KERNEL); @@ -752,16 +753,17 @@ static int efm32_uart_probe(struct platform_device *pdev) efm_port->pdata = *pdata; } - if (efm_port->port.line >= 0 && - efm_port->port.line < ARRAY_SIZE(efm32_uart_ports)) - efm32_uart_ports[efm_port->port.line] = efm_port; + line = efm_port->port.line; + + if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[line] = efm_port; ret = uart_add_one_port(&efm32_uart_reg, &efm_port->port); if (ret) { dev_dbg(&pdev->dev, "failed to add port: %d\n", ret); - if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports)) - efm32_uart_ports[pdev->id] = NULL; + if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[line] = NULL; err_get_rxirq: err_too_small: err_get_base: @@ -777,11 +779,12 @@ err_get_base: static int efm32_uart_remove(struct platform_device *pdev) { struct efm32_uart_port *efm_port = platform_get_drvdata(pdev); + unsigned int line = efm_port->port.line; uart_remove_one_port(&efm32_uart_reg, &efm_port->port); - if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports)) - efm32_uart_ports[pdev->id] = NULL; + if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[line] = NULL; kfree(efm_port); -- cgit v0.10.2 From 3fc1eb5fe5318d3eff9938240c29cc6ce2d6ce4e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 30 Jul 2013 16:35:21 +0200 Subject: serial/efm32-uart: don't slur over failure in probe_dt MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index ce1ebbb..98adaa1 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -751,7 +751,8 @@ static int efm32_uart_probe(struct platform_device *pdev) if (pdata) efm_port->pdata = *pdata; - } + } else if (ret < 0) + goto err_probe_dt; line = efm_port->port.line; @@ -764,6 +765,7 @@ static int efm32_uart_probe(struct platform_device *pdev) if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) efm32_uart_ports[line] = NULL; +err_probe_dt: err_get_rxirq: err_too_small: err_get_base: -- cgit v0.10.2 From e087ab74f3dd30105041e1c68db209f235b63042 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 31 Jul 2013 14:56:29 +0400 Subject: serial: sccnxp: Disable regulator on error The patch disables the regulator in case of errors, if we have it. In addition, the patch adds support for deferred regulator probe and makes error path are a bit clean. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 9855517..12a5c26 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -787,10 +787,9 @@ static int sccnxp_probe(struct platform_device *pdev) struct sccnxp_port *s; void __iomem *membase; - if (!res) { - dev_err(&pdev->dev, "Missing memory resource data\n"); - return -EADDRNOTAVAIL; - } + membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(membase)) + return PTR_ERR(membase); s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL); if (!s) { @@ -885,10 +884,20 @@ static int sccnxp_probe(struct platform_device *pdev) break; default: dev_err(&pdev->dev, "Unsupported chip type %i\n", chiptype); - ret = -ENOTSUPP; - goto err_out; + return -ENOTSUPP; } + s->regulator = devm_regulator_get(&pdev->dev, "vcc"); + if (!IS_ERR(s->regulator)) { + ret = regulator_enable(s->regulator); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable regulator: %i\n", ret); + return ret; + } + } else if (PTR_ERR(s->regulator) == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!pdata) { dev_warn(&pdev->dev, "No platform data supplied, using defaults\n"); @@ -919,22 +928,6 @@ static int sccnxp_probe(struct platform_device *pdev) goto err_out; } - s->regulator = devm_regulator_get(&pdev->dev, "VCC"); - if (!IS_ERR(s->regulator)) { - ret = regulator_enable(s->regulator); - if (ret) { - dev_err(&pdev->dev, - "Failed to enable regulator: %i\n", ret); - return ret; - } - } - - membase = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(membase)) { - ret = PTR_ERR(membase); - goto err_out; - } - s->uart.owner = THIS_MODULE; s->uart.dev_name = "ttySC"; s->uart.major = SCCNXP_MAJOR; @@ -997,6 +990,9 @@ static int sccnxp_probe(struct platform_device *pdev) } err_out: + if (!IS_ERR(s->regulator)) + return regulator_disable(s->regulator); + return ret; } -- cgit v0.10.2 From 90efa75f7ab0be5677f0cca155dbf0b39eacdd03 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 31 Jul 2013 14:56:30 +0400 Subject: serial: sccnxp: Using CLK API for getting UART clock This patch removes "frequency" parameter from SCCNXP platform_data and uses CLK API for getting clock. If CLK ommited, default IC frequency will be used instead. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index dd0ab98..f9407e1 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -122,7 +122,6 @@ static struct resource sc26xx_rsrc[] = { static struct sccnxp_pdata sccnxp_data = { .reg_shift = 2, - .frequency = 3686400, .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) | MCTRL_SIG(RTS_OP, LINE_OP3) | MCTRL_SIG(DSR_IP, LINE_IP5) | diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 12a5c26..81e7047 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -15,6 +15,7 @@ #define SUPPORT_SYSRQ #endif +#include #include #include #include @@ -783,9 +784,10 @@ static int sccnxp_probe(struct platform_device *pdev) struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); int chiptype = pdev->id_entry->driver_data; struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); - int i, ret, fifosize, freq_min, freq_max; + int i, ret, fifosize, freq_min, freq_max, uartclk; struct sccnxp_port *s; void __iomem *membase; + struct clk *clk; membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(membase)) @@ -898,11 +900,25 @@ static int sccnxp_probe(struct platform_device *pdev) } else if (PTR_ERR(s->regulator) == -EPROBE_DEFER) return -EPROBE_DEFER; - if (!pdata) { - dev_warn(&pdev->dev, - "No platform data supplied, using defaults\n"); - s->pdata.frequency = s->freq_std; + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + if (PTR_ERR(clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_out; + } + dev_notice(&pdev->dev, "Using default clock frequency\n"); + uartclk = s->freq_std; } else + uartclk = clk_get_rate(clk); + + /* Check input frequency */ + if ((uartclk < freq_min) || (uartclk > freq_max)) { + dev_err(&pdev->dev, "Frequency out of bounds\n"); + ret = -EINVAL; + goto err_out; + } + + if (pdata) memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); if (s->pdata.poll_time_us) { @@ -920,14 +936,6 @@ static int sccnxp_probe(struct platform_device *pdev) } } - /* Check input frequency */ - if ((s->pdata.frequency < freq_min) || - (s->pdata.frequency > freq_max)) { - dev_err(&pdev->dev, "Frequency out of bounds\n"); - ret = -EINVAL; - goto err_out; - } - s->uart.owner = THIS_MODULE; s->uart.dev_name = "ttySC"; s->uart.major = SCCNXP_MAJOR; @@ -959,7 +967,7 @@ static int sccnxp_probe(struct platform_device *pdev) s->port[i].mapbase = res->start; s->port[i].membase = membase; s->port[i].regshift = s->pdata.reg_shift; - s->port[i].uartclk = s->pdata.frequency; + s->port[i].uartclk = uartclk; s->port[i].ops = &sccnxp_ops; uart_add_one_port(&s->uart, &s->port[i]); /* Set direction to input */ diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index bdc510d..af0c8c3 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -60,7 +60,6 @@ * }; * * static struct sccnxp_pdata sc2892_info = { - * .frequency = 3686400, * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0), * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1), * }; @@ -78,8 +77,6 @@ /* SCCNXP platform data structure */ struct sccnxp_pdata { - /* Frequency (extrenal clock or crystal) */ - int frequency; /* Shift for A0 line */ const u8 reg_shift; /* Modem control lines configuration */ -- cgit v0.10.2 From ea4c39beace859139bc184a1aebdccdc12c04a2e Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 31 Jul 2013 14:56:31 +0400 Subject: serial: sccnxp: Using structure for each supported IC instead of switch in probe This patch replaces switch in probe function to constant structure for each supported IC. This makes code a bit smaller and cleaner and helps adding DT support to the driver in the future. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 81e7047..49e9bbf 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -95,16 +95,17 @@ #define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0) #define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0) -/* Supported chip types */ -enum { - SCCNXP_TYPE_SC2681 = 2681, - SCCNXP_TYPE_SC2691 = 2691, - SCCNXP_TYPE_SC2692 = 2692, - SCCNXP_TYPE_SC2891 = 2891, - SCCNXP_TYPE_SC2892 = 2892, - SCCNXP_TYPE_SC28202 = 28202, - SCCNXP_TYPE_SC68681 = 68681, - SCCNXP_TYPE_SC68692 = 68692, +#define SCCNXP_HAVE_IO 0x00000001 +#define SCCNXP_HAVE_MR0 0x00000002 + +struct sccnxp_chip { + const char *name; + unsigned int nr; + unsigned long freq_min; + unsigned long freq_std; + unsigned long freq_max; + unsigned int flags; + unsigned int fifosize; }; struct sccnxp_port { @@ -112,16 +113,10 @@ struct sccnxp_port { struct uart_port port[SCCNXP_MAX_UARTS]; bool opened[SCCNXP_MAX_UARTS]; - const char *name; int irq; - u8 imr; - u8 addr_mask; - int freq_std; - int flags; -#define SCCNXP_HAVE_IO 0x00000001 -#define SCCNXP_HAVE_MR0 0x00000002 + struct sccnxp_chip *chip; #ifdef CONFIG_SERIAL_SCCNXP_CONSOLE struct console console; @@ -137,29 +132,94 @@ struct sccnxp_port { struct regulator *regulator; }; -static inline u8 sccnxp_raw_read(void __iomem *base, u8 reg, u8 shift) -{ - return readb(base + (reg << shift)); -} +static const struct sccnxp_chip sc2681 = { + .name = "SC2681", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, +}; -static inline void sccnxp_raw_write(void __iomem *base, u8 reg, u8 shift, u8 v) -{ - writeb(v, base + (reg << shift)); -} +static const struct sccnxp_chip sc2691 = { + .name = "SC2691", + .nr = 1, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = 0, + .fifosize = 3, +}; + +static const struct sccnxp_chip sc2692 = { + .name = "SC2692", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, +}; + +static const struct sccnxp_chip sc2891 = { + .name = "SC2891", + .nr = 1, + .freq_min = 100000, + .freq_std = 3686400, + .freq_max = 8000000, + .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0, + .fifosize = 16, +}; + +static const struct sccnxp_chip sc2892 = { + .name = "SC2892", + .nr = 2, + .freq_min = 100000, + .freq_std = 3686400, + .freq_max = 8000000, + .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0, + .fifosize = 16, +}; + +static const struct sccnxp_chip sc28202 = { + .name = "SC28202", + .nr = 2, + .freq_min = 1000000, + .freq_std = 14745600, + .freq_max = 50000000, + .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0, + .fifosize = 256, +}; + +static const struct sccnxp_chip sc68681 = { + .name = "SC68681", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, +}; + +static const struct sccnxp_chip sc68692 = { + .name = "SC68692", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, +}; static inline u8 sccnxp_read(struct uart_port *port, u8 reg) { - struct sccnxp_port *s = dev_get_drvdata(port->dev); - - return sccnxp_raw_read(port->membase, reg & s->addr_mask, - port->regshift); + return readb(port->membase + (reg << port->regshift)); } static inline void sccnxp_write(struct uart_port *port, u8 reg, u8 v) { - struct sccnxp_port *s = dev_get_drvdata(port->dev); - - sccnxp_raw_write(port->membase, reg & s->addr_mask, port->regshift, v); + writeb(v, port->membase + (reg << port->regshift)); } static inline u8 sccnxp_port_read(struct uart_port *port, u8 reg) @@ -225,13 +285,14 @@ static int sccnxp_set_baud(struct uart_port *port, int baud) { struct sccnxp_port *s = dev_get_drvdata(port->dev); int div_std, tmp_baud, bestbaud = baud, besterr = -1; + struct sccnxp_chip *chip = s->chip; u8 i, acr = 0, csr = 0, mr0 = 0; /* Find best baud from table */ for (i = 0; baud_std[i].baud && besterr; i++) { - if (baud_std[i].mr0 && !(s->flags & SCCNXP_HAVE_MR0)) + if (baud_std[i].mr0 && !(chip->flags & SCCNXP_HAVE_MR0)) continue; - div_std = DIV_ROUND_CLOSEST(s->freq_std, baud_std[i].baud); + div_std = DIV_ROUND_CLOSEST(chip->freq_std, baud_std[i].baud); tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std); if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) { acr = baud_std[i].acr; @@ -241,7 +302,7 @@ static int sccnxp_set_baud(struct uart_port *port, int baud) } } - if (s->flags & SCCNXP_HAVE_MR0) { + if (chip->flags & SCCNXP_HAVE_MR0) { /* Enable FIFO, set half level for TX */ mr0 |= MR0_FIFO | MR0_TXLVL; /* Update MR0 */ @@ -364,7 +425,7 @@ static void sccnxp_handle_tx(struct uart_port *port) sccnxp_disable_irq(port, IMR_TXRDY); /* Set direction to input */ - if (s->flags & SCCNXP_HAVE_IO) + if (s->chip->flags & SCCNXP_HAVE_IO) sccnxp_set_bit(port, DIR_OP, 0); } return; @@ -438,7 +499,7 @@ static void sccnxp_start_tx(struct uart_port *port) spin_lock_irqsave(&s->lock, flags); /* Set direction to output */ - if (s->flags & SCCNXP_HAVE_IO) + if (s->chip->flags & SCCNXP_HAVE_IO) sccnxp_set_bit(port, DIR_OP, 1); sccnxp_enable_irq(port, IMR_TXRDY); @@ -484,7 +545,7 @@ static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl) struct sccnxp_port *s = dev_get_drvdata(port->dev); unsigned long flags; - if (!(s->flags & SCCNXP_HAVE_IO)) + if (!(s->chip->flags & SCCNXP_HAVE_IO)) return; spin_lock_irqsave(&s->lock, flags); @@ -502,7 +563,7 @@ static unsigned int sccnxp_get_mctrl(struct uart_port *port) struct sccnxp_port *s = dev_get_drvdata(port->dev); unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; - if (!(s->flags & SCCNXP_HAVE_IO)) + if (!(s->chip->flags & SCCNXP_HAVE_IO)) return mctrl; spin_lock_irqsave(&s->lock, flags); @@ -618,7 +679,7 @@ static void sccnxp_set_termios(struct uart_port *port, /* Setup baudrate */ baud = uart_get_baud_rate(port, termios, old, 50, - (s->flags & SCCNXP_HAVE_MR0) ? + (s->chip->flags & SCCNXP_HAVE_MR0) ? 230400 : 38400); baud = sccnxp_set_baud(port, baud); @@ -642,7 +703,7 @@ static int sccnxp_startup(struct uart_port *port) spin_lock_irqsave(&s->lock, flags); - if (s->flags & SCCNXP_HAVE_IO) { + if (s->chip->flags & SCCNXP_HAVE_IO) { /* Outputs are controlled manually */ sccnxp_write(port, SCCNXP_OPCR_REG, 0); } @@ -682,7 +743,7 @@ static void sccnxp_shutdown(struct uart_port *port) sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE); /* Leave direction to input */ - if (s->flags & SCCNXP_HAVE_IO) + if (s->chip->flags & SCCNXP_HAVE_IO) sccnxp_set_bit(port, DIR_OP, 0); spin_unlock_irqrestore(&s->lock, flags); @@ -692,7 +753,7 @@ static const char *sccnxp_type(struct uart_port *port) { struct sccnxp_port *s = dev_get_drvdata(port->dev); - return (port->type == PORT_SC26XX) ? s->name : NULL; + return (port->type == PORT_SC26XX) ? s->chip->name : NULL; } static void sccnxp_release_port(struct uart_port *port) @@ -779,12 +840,24 @@ static int sccnxp_console_setup(struct console *co, char *options) } #endif +static const struct platform_device_id sccnxp_id_table[] = { + { .name = "sc2681", .driver_data = (kernel_ulong_t)&sc2681, }, + { .name = "sc2691", .driver_data = (kernel_ulong_t)&sc2691, }, + { .name = "sc2692", .driver_data = (kernel_ulong_t)&sc2692, }, + { .name = "sc2891", .driver_data = (kernel_ulong_t)&sc2891, }, + { .name = "sc2892", .driver_data = (kernel_ulong_t)&sc2892, }, + { .name = "sc28202", .driver_data = (kernel_ulong_t)&sc28202, }, + { .name = "sc68681", .driver_data = (kernel_ulong_t)&sc68681, }, + { .name = "sc68692", .driver_data = (kernel_ulong_t)&sc68692, }, + { } +}; +MODULE_DEVICE_TABLE(platform, sccnxp_id_table); + static int sccnxp_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - int chiptype = pdev->id_entry->driver_data; struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); - int i, ret, fifosize, freq_min, freq_max, uartclk; + int i, ret, uartclk; struct sccnxp_port *s; void __iomem *membase; struct clk *clk; @@ -802,92 +875,7 @@ static int sccnxp_probe(struct platform_device *pdev) spin_lock_init(&s->lock); - /* Individual chip settings */ - switch (chiptype) { - case SCCNXP_TYPE_SC2681: - s->name = "SC2681"; - s->uart.nr = 2; - s->freq_std = 3686400; - s->addr_mask = 0x0f; - s->flags = SCCNXP_HAVE_IO; - fifosize = 3; - freq_min = 1000000; - freq_max = 4000000; - break; - case SCCNXP_TYPE_SC2691: - s->name = "SC2691"; - s->uart.nr = 1; - s->freq_std = 3686400; - s->addr_mask = 0x07; - s->flags = 0; - fifosize = 3; - freq_min = 1000000; - freq_max = 4000000; - break; - case SCCNXP_TYPE_SC2692: - s->name = "SC2692"; - s->uart.nr = 2; - s->freq_std = 3686400; - s->addr_mask = 0x0f; - s->flags = SCCNXP_HAVE_IO; - fifosize = 3; - freq_min = 1000000; - freq_max = 4000000; - break; - case SCCNXP_TYPE_SC2891: - s->name = "SC2891"; - s->uart.nr = 1; - s->freq_std = 3686400; - s->addr_mask = 0x0f; - s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0; - fifosize = 16; - freq_min = 100000; - freq_max = 8000000; - break; - case SCCNXP_TYPE_SC2892: - s->name = "SC2892"; - s->uart.nr = 2; - s->freq_std = 3686400; - s->addr_mask = 0x0f; - s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0; - fifosize = 16; - freq_min = 100000; - freq_max = 8000000; - break; - case SCCNXP_TYPE_SC28202: - s->name = "SC28202"; - s->uart.nr = 2; - s->freq_std = 14745600; - s->addr_mask = 0x7f; - s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0; - fifosize = 256; - freq_min = 1000000; - freq_max = 50000000; - break; - case SCCNXP_TYPE_SC68681: - s->name = "SC68681"; - s->uart.nr = 2; - s->freq_std = 3686400; - s->addr_mask = 0x0f; - s->flags = SCCNXP_HAVE_IO; - fifosize = 3; - freq_min = 1000000; - freq_max = 4000000; - break; - case SCCNXP_TYPE_SC68692: - s->name = "SC68692"; - s->uart.nr = 2; - s->freq_std = 3686400; - s->addr_mask = 0x0f; - s->flags = SCCNXP_HAVE_IO; - fifosize = 3; - freq_min = 1000000; - freq_max = 4000000; - break; - default: - dev_err(&pdev->dev, "Unsupported chip type %i\n", chiptype); - return -ENOTSUPP; - } + s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; s->regulator = devm_regulator_get(&pdev->dev, "vcc"); if (!IS_ERR(s->regulator)) { @@ -907,12 +895,12 @@ static int sccnxp_probe(struct platform_device *pdev) goto err_out; } dev_notice(&pdev->dev, "Using default clock frequency\n"); - uartclk = s->freq_std; + uartclk = s->chip->freq_std; } else uartclk = clk_get_rate(clk); /* Check input frequency */ - if ((uartclk < freq_min) || (uartclk > freq_max)) { + if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) { dev_err(&pdev->dev, "Frequency out of bounds\n"); ret = -EINVAL; goto err_out; @@ -940,6 +928,7 @@ static int sccnxp_probe(struct platform_device *pdev) s->uart.dev_name = "ttySC"; s->uart.major = SCCNXP_MAJOR; s->uart.minor = SCCNXP_MINOR; + s->uart.nr = s->chip->nr; #ifdef CONFIG_SERIAL_SCCNXP_CONSOLE s->uart.cons = &s->console; s->uart.cons->device = uart_console_device; @@ -961,7 +950,7 @@ static int sccnxp_probe(struct platform_device *pdev) s->port[i].dev = &pdev->dev; s->port[i].irq = s->irq; s->port[i].type = PORT_SC26XX; - s->port[i].fifosize = fifosize; + s->port[i].fifosize = s->chip->fifosize; s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; s->port[i].iotype = UPIO_MEM; s->port[i].mapbase = res->start; @@ -971,7 +960,7 @@ static int sccnxp_probe(struct platform_device *pdev) s->port[i].ops = &sccnxp_ops; uart_add_one_port(&s->uart, &s->port[i]); /* Set direction to input */ - if (s->flags & SCCNXP_HAVE_IO) + if (s->chip->flags & SCCNXP_HAVE_IO) sccnxp_set_bit(&s->port[i], DIR_OP, 0); } @@ -1025,19 +1014,6 @@ static int sccnxp_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id sccnxp_id_table[] = { - { "sc2681", SCCNXP_TYPE_SC2681 }, - { "sc2691", SCCNXP_TYPE_SC2691 }, - { "sc2692", SCCNXP_TYPE_SC2692 }, - { "sc2891", SCCNXP_TYPE_SC2891 }, - { "sc2892", SCCNXP_TYPE_SC2892 }, - { "sc28202", SCCNXP_TYPE_SC28202 }, - { "sc68681", SCCNXP_TYPE_SC68681 }, - { "sc68692", SCCNXP_TYPE_SC68692 }, - { }, -}; -MODULE_DEVICE_TABLE(platform, sccnxp_id_table); - static struct platform_driver sccnxp_uart_driver = { .driver = { .name = SCCNXP_NAME, -- cgit v0.10.2 From 85c996907473e4ef824774b97b26499adf66521f Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 31 Jul 2013 14:55:45 +0400 Subject: serial: sccnxp: Add DT support Add DT support to the SCCNCP serial driver. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt b/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt new file mode 100644 index 0000000..d18b169 --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt @@ -0,0 +1,53 @@ +* NXP (Philips) SCC+++(SCN+++) serial driver + +Required properties: +- compatible: Should be "nxp,". The supported ICs include sc2681, + sc2691, sc2692, sc2891, sc2892, sc28202, sc68681 and sc68692. +- reg: Address and length of the register set for the device. +- interrupts: Should contain the interrupt number. If omitted, + polling mode will be used instead, so "poll-interval" property should + be populated in this case. + +Optional properties: +- clocks: Phandle to input clock. If omitted, default IC frequency will be + used instead. +- poll-interval: Poll interval time in nanoseconds. +- vcc-supply: The regulator supplying the VCC to drive the chip. +- nxp,sccnxp-io-cfg: Array contains values for the emulated modem signals. + The number of values depends on the UART-number in the selected chip. + Each value should be composed according to the following rules: + (LINE1 << SIGNAL1) | ... | (LINEX << SIGNALX), where: + LINE - VALUE: + OP0 - 1 + OP1 - 2 + OP2 - 3 + OP3 - 4 + OP4 - 5 + OP5 - 6 + OP6 - 7 + OP7 - 8 + IP0 - 9 + IP1 - 10 + IP2 - 11 + IP3 - 12 + IP4 - 13 + IP5 - 14 + IP6 - 15 + SIGNAL - VALUE: + DTR - 0 + RTS - 4 + DSR - 8 + CTS - 12 + DCD - 16 + RNG - 20 + DIR - 24 + +Example (Dual UART with direction control on OP0 & OP1): +sc2892@10100000 { + compatible = "nxp,sc2892"; + reg = <0x10100000 0x10>; + poll-interval = <10000>; + clocks = <&sc2892_clk>; + vcc-supply = <&sc2892_reg>; + nxp,sccnxp-io-cfg = <0x01000000 0x02000000>; +}; diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 49e9bbf..67f73d1 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include #include @@ -853,10 +855,25 @@ static const struct platform_device_id sccnxp_id_table[] = { }; MODULE_DEVICE_TABLE(platform, sccnxp_id_table); +static const struct of_device_id sccnxp_dt_id_table[] = { + { .compatible = "nxp,sc2681", .data = &sc2681, }, + { .compatible = "nxp,sc2691", .data = &sc2691, }, + { .compatible = "nxp,sc2692", .data = &sc2692, }, + { .compatible = "nxp,sc2891", .data = &sc2891, }, + { .compatible = "nxp,sc2892", .data = &sc2892, }, + { .compatible = "nxp,sc28202", .data = &sc28202, }, + { .compatible = "nxp,sc68681", .data = &sc68681, }, + { .compatible = "nxp,sc68692", .data = &sc68692, }, + { } +}; +MODULE_DEVICE_TABLE(of, sccnxp_dt_id_table); + static int sccnxp_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); + const struct of_device_id *of_id = + of_match_device(sccnxp_dt_id_table, &pdev->dev); int i, ret, uartclk; struct sccnxp_port *s; void __iomem *membase; @@ -875,7 +892,22 @@ static int sccnxp_probe(struct platform_device *pdev) spin_lock_init(&s->lock); - s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; + if (of_id) { + s->chip = (struct sccnxp_chip *)of_id->data; + + of_property_read_u32(pdev->dev.of_node, "poll-interval", + &s->pdata.poll_time_us); + of_property_read_u32(pdev->dev.of_node, "reg-shift", + &s->pdata.reg_shift); + of_property_read_u32_array(pdev->dev.of_node, + "nxp,sccnxp-io-cfg", + s->pdata.mctrl_cfg, s->chip->nr); + } else { + s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; + + if (pdata) + memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); + } s->regulator = devm_regulator_get(&pdev->dev, "vcc"); if (!IS_ERR(s->regulator)) { @@ -906,16 +938,11 @@ static int sccnxp_probe(struct platform_device *pdev) goto err_out; } - if (pdata) - memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); - if (s->pdata.poll_time_us) { dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n", s->pdata.poll_time_us); s->poll = 1; - } - - if (!s->poll) { + } else { s->irq = platform_get_irq(pdev, 0); if (s->irq < 0) { dev_err(&pdev->dev, "Missing irq resource data\n"); @@ -1016,8 +1043,9 @@ static int sccnxp_remove(struct platform_device *pdev) static struct platform_driver sccnxp_uart_driver = { .driver = { - .name = SCCNXP_NAME, - .owner = THIS_MODULE, + .name = SCCNXP_NAME, + .owner = THIS_MODULE, + .of_match_table = sccnxp_dt_id_table, }, .probe = sccnxp_probe, .remove = sccnxp_remove, diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index af0c8c3..98373d6 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -78,11 +78,11 @@ /* SCCNXP platform data structure */ struct sccnxp_pdata { /* Shift for A0 line */ - const u8 reg_shift; + u32 reg_shift; /* Modem control lines configuration */ - const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + u32 mctrl_cfg[SCCNXP_MAX_UARTS]; /* Timer value for polling mode (usecs) */ - const unsigned int poll_time_us; + u32 poll_time_us; }; #endif -- cgit v0.10.2 From cb50e5235b8ae5aa0fe422eaaa8e444024c5bd98 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 31 Jul 2013 14:05:45 -0400 Subject: tty: Only hangup once Instrumented testing shows a tty can be hungup multiple times [1]. Although concurrent hangups are properly serialized, multiple hangups for the same tty should be prevented. If tty has already been HUPPED, abort hangup. Note it is not necessary to cleanup file *redirect on subsequent hangups, as only TIOCCONS can set that value and ioctls are disabled after hangup. [1] Test performed by simulating a concurrent async hangup via tty_hangup() with a sync hangup via tty_vhangup(), while __tty_hangup() was instrumented with: diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 26bb78c..fe8b061 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -629,6 +629,8 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) tty_lock(tty); + WARN_ON(test_bit(TTY_HUPPED, &tty->flags)); + /* some functions below drop BTM, so we need this bit */ set_bit(TTY_HUPPING, &tty->flags); Test result: WARNING: at /home/peter/src/kernels/mainline/drivers/tty/tty_io.c:632 __tty_hangup+0x459/0x460() Modules linked in: ip6table_filter ip6_tables ebtable_nat <...snip...> CPU: 6 PID: 1197 Comm: kworker/6:2 Not tainted 3.10.0-0+rfcomm-xeon #0+rfcomm Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 Workqueue: events do_tty_hangup 0000000000000009 ffff8802b16d7d18 ffffffff816b553e ffff8802b16d7d58 ffffffff810407e0 ffff880254f95c00 ffff880254f95c00 ffff8802bfd92b00 ffff8802bfd96b00 ffff880254f95e40 0000000000000180 ffff8802b16d7d68 Call Trace: [] dump_stack+0x19/0x1b [] warn_slowpath_common+0x70/0xa0 [] warn_slowpath_null+0x1a/0x20 [] __tty_hangup+0x459/0x460 [] ? finish_task_switch+0xbc/0xe0 [] do_tty_hangup+0x17/0x20 [] process_one_work+0x16f/0x450 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26a/0x380 [] ? rescuer_thread+0x310/0x310 [] kthread+0xc0/0xd0 [] ? destroy_compound_page+0x65/0x92 [] ? kthread_create_on_node+0x130/0x130 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x130/0x130 ---[ end trace 98d9f01536cf411e ]--- Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 26bb78c..a9355ce 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -629,6 +629,11 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) tty_lock(tty); + if (test_bit(TTY_HUPPED, &tty->flags)) { + tty_unlock(tty); + return; + } + /* some functions below drop BTM, so we need this bit */ set_bit(TTY_HUPPING, &tty->flags); -- cgit v0.10.2 From 5284eba7b37dfeffe75bfdf81a13e9efebe0480a Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 1 Aug 2013 21:49:19 -0700 Subject: serial/arc-uart: Handle Rx Error Interrupts w/o any data Currently, Rx error handling only triggers if there is some Rx data. Fix that by checking for error - before the data handling. Reported-by: Mischa Jonker Tested-by: Mischa Jonker Signed-off-by: Vineet Gupta Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 2f195f0..e296c89 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -209,9 +209,9 @@ static void arc_serial_start_tx(struct uart_port *port) arc_serial_tx_chars(uart); } -static void arc_serial_rx_chars(struct arc_uart_port *uart) +static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status) { - unsigned int status, ch, flg = 0; + unsigned int ch, flg = 0; /* * UART has 4 deep RX-FIFO. Driver's recongnition of this fact @@ -222,11 +222,11 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart) * before RX-EMPTY=0, implies some sort of buffering going on in the * controller, which is indeed the Rx-FIFO. */ - while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)) { - - ch = UART_GET_DATA(uart); - uart->port.icount.rx++; - + do { + /* + * This could be an Rx Intr for err (no data), + * so check err and clear that Intr first + */ if (unlikely(status & (RXOERR | RXFERR))) { if (status & RXOERR) { uart->port.icount.overrun++; @@ -242,6 +242,12 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart) } else flg = TTY_NORMAL; + if (status & RXEMPTY) + continue; + + ch = UART_GET_DATA(uart); + uart->port.icount.rx++; + if (unlikely(uart_handle_sysrq_char(&uart->port, ch))) goto done; @@ -249,7 +255,7 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart) done: tty_flip_buffer_push(&uart->port.state->port); - } + } while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)); } /* @@ -292,11 +298,11 @@ static irqreturn_t arc_serial_isr(int irq, void *dev_id) * notifications from the UART Controller. * To demultiplex between the two, we check the relevant bits */ - if ((status & RXIENB) && !(status & RXEMPTY)) { + if (status & RXIENB) { /* already in ISR, no need of xx_irqsave */ spin_lock(&uart->port.lock); - arc_serial_rx_chars(uart); + arc_serial_rx_chars(uart, status); spin_unlock(&uart->port.lock); } -- cgit v0.10.2 From 00a135b3952f6ccedfb688919c59bb3fa199a11f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 1 Aug 2013 21:49:20 -0700 Subject: serial/arc-uart: Remove the goto/label Signed-off-by: Vineet Gupta Cc: Mischa Jonker Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index e296c89..6ac5270 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -248,12 +248,9 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status) ch = UART_GET_DATA(uart); uart->port.icount.rx++; - if (unlikely(uart_handle_sysrq_char(&uart->port, ch))) - goto done; + if (!(uart_handle_sysrq_char(&uart->port, ch))) + uart_insert_char(&uart->port, status, RXOERR, ch, flg); - uart_insert_char(&uart->port, status, RXOERR, ch, flg); - -done: tty_flip_buffer_push(&uart->port.state->port); } while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)); } -- cgit v0.10.2 From 3ba35baa55fa4420f9ea7132d728ed68cfa37d28 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 1 Aug 2013 18:17:45 +0900 Subject: serial: sh-sci: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 72ca870..5377502 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2469,7 +2469,7 @@ static int sci_probe_single(struct platform_device *dev, static int sci_probe(struct platform_device *dev) { - struct plat_sci_port *p = dev->dev.platform_data; + struct plat_sci_port *p = dev_get_platdata(&dev->dev); struct sci_port *sp = &sci_ports[dev->id]; int ret; -- cgit v0.10.2 From 461a8ecb2d76fb6f3ac1a90eb886697db869d387 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Aug 2013 15:25:19 +0800 Subject: Revert "serial: sccnxp: Add DT support" This reverts commit 85c996907473e4ef824774b97b26499adf66521f. Alexander wishes to remove this patch as it is incorrect. Reported-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt b/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt deleted file mode 100644 index d18b169..0000000 --- a/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt +++ /dev/null @@ -1,53 +0,0 @@ -* NXP (Philips) SCC+++(SCN+++) serial driver - -Required properties: -- compatible: Should be "nxp,". The supported ICs include sc2681, - sc2691, sc2692, sc2891, sc2892, sc28202, sc68681 and sc68692. -- reg: Address and length of the register set for the device. -- interrupts: Should contain the interrupt number. If omitted, - polling mode will be used instead, so "poll-interval" property should - be populated in this case. - -Optional properties: -- clocks: Phandle to input clock. If omitted, default IC frequency will be - used instead. -- poll-interval: Poll interval time in nanoseconds. -- vcc-supply: The regulator supplying the VCC to drive the chip. -- nxp,sccnxp-io-cfg: Array contains values for the emulated modem signals. - The number of values depends on the UART-number in the selected chip. - Each value should be composed according to the following rules: - (LINE1 << SIGNAL1) | ... | (LINEX << SIGNALX), where: - LINE - VALUE: - OP0 - 1 - OP1 - 2 - OP2 - 3 - OP3 - 4 - OP4 - 5 - OP5 - 6 - OP6 - 7 - OP7 - 8 - IP0 - 9 - IP1 - 10 - IP2 - 11 - IP3 - 12 - IP4 - 13 - IP5 - 14 - IP6 - 15 - SIGNAL - VALUE: - DTR - 0 - RTS - 4 - DSR - 8 - CTS - 12 - DCD - 16 - RNG - 20 - DIR - 24 - -Example (Dual UART with direction control on OP0 & OP1): -sc2892@10100000 { - compatible = "nxp,sc2892"; - reg = <0x10100000 0x10>; - poll-interval = <10000>; - clocks = <&sc2892_clk>; - vcc-supply = <&sc2892_reg>; - nxp,sccnxp-io-cfg = <0x01000000 0x02000000>; -}; diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 67f73d1..49e9bbf 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -20,8 +20,6 @@ #include #include #include -#include -#include #include #include #include @@ -855,25 +853,10 @@ static const struct platform_device_id sccnxp_id_table[] = { }; MODULE_DEVICE_TABLE(platform, sccnxp_id_table); -static const struct of_device_id sccnxp_dt_id_table[] = { - { .compatible = "nxp,sc2681", .data = &sc2681, }, - { .compatible = "nxp,sc2691", .data = &sc2691, }, - { .compatible = "nxp,sc2692", .data = &sc2692, }, - { .compatible = "nxp,sc2891", .data = &sc2891, }, - { .compatible = "nxp,sc2892", .data = &sc2892, }, - { .compatible = "nxp,sc28202", .data = &sc28202, }, - { .compatible = "nxp,sc68681", .data = &sc68681, }, - { .compatible = "nxp,sc68692", .data = &sc68692, }, - { } -}; -MODULE_DEVICE_TABLE(of, sccnxp_dt_id_table); - static int sccnxp_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); - const struct of_device_id *of_id = - of_match_device(sccnxp_dt_id_table, &pdev->dev); int i, ret, uartclk; struct sccnxp_port *s; void __iomem *membase; @@ -892,22 +875,7 @@ static int sccnxp_probe(struct platform_device *pdev) spin_lock_init(&s->lock); - if (of_id) { - s->chip = (struct sccnxp_chip *)of_id->data; - - of_property_read_u32(pdev->dev.of_node, "poll-interval", - &s->pdata.poll_time_us); - of_property_read_u32(pdev->dev.of_node, "reg-shift", - &s->pdata.reg_shift); - of_property_read_u32_array(pdev->dev.of_node, - "nxp,sccnxp-io-cfg", - s->pdata.mctrl_cfg, s->chip->nr); - } else { - s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; - - if (pdata) - memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); - } + s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; s->regulator = devm_regulator_get(&pdev->dev, "vcc"); if (!IS_ERR(s->regulator)) { @@ -938,11 +906,16 @@ static int sccnxp_probe(struct platform_device *pdev) goto err_out; } + if (pdata) + memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); + if (s->pdata.poll_time_us) { dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n", s->pdata.poll_time_us); s->poll = 1; - } else { + } + + if (!s->poll) { s->irq = platform_get_irq(pdev, 0); if (s->irq < 0) { dev_err(&pdev->dev, "Missing irq resource data\n"); @@ -1043,9 +1016,8 @@ static int sccnxp_remove(struct platform_device *pdev) static struct platform_driver sccnxp_uart_driver = { .driver = { - .name = SCCNXP_NAME, - .owner = THIS_MODULE, - .of_match_table = sccnxp_dt_id_table, + .name = SCCNXP_NAME, + .owner = THIS_MODULE, }, .probe = sccnxp_probe, .remove = sccnxp_remove, diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index 98373d6..af0c8c3 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -78,11 +78,11 @@ /* SCCNXP platform data structure */ struct sccnxp_pdata { /* Shift for A0 line */ - u32 reg_shift; + const u8 reg_shift; /* Modem control lines configuration */ - u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; /* Timer value for polling mode (usecs) */ - u32 poll_time_us; + const unsigned int poll_time_us; }; #endif -- cgit v0.10.2 From a4f2dc9efc00a56ca30ce340a1405293ec9488a4 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 2 Aug 2013 10:23:51 +0100 Subject: serial: st-asc: Fix unused variable warning for non DT. This patch fixes a below warning reported by kbuild test robot. drivers/tty/serial/st-asc.c:727:28: warning: 'asc_match' defined but not used [-Wunused-variable] The code used in DT case is now ifdefed under CONFIG_OF to fix this warning. Signed-off-by: Srinivas Kandagatla Reported-by: Kbuild Test Robot Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 1838798..2ff4b1b 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -724,12 +724,14 @@ static struct asc_port *asc_of_get_asc_port(struct platform_device *pdev) return &asc_ports[id]; } +#ifdef CONFIG_OF static struct of_device_id asc_match[] = { { .compatible = "st,asc", }, {}, }; MODULE_DEVICE_TABLE(of, asc_match); +#endif static int asc_serial_probe(struct platform_device *pdev) { -- cgit v0.10.2 From 8418e67d95235c3449df6f2e5b33863343fa72f9 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Sat, 3 Aug 2013 10:09:14 -0400 Subject: serial: mxs: enable the DMA only when the RTS/CTS is valid The original DMA support works only when RTS/CTS is enabled. (see the "e800163 serial: mxs-auart: add the DMA support for mx28") But after several patches, DMA support has lost this limit. (see the "bcc20f9 serial: mxs-auart: move to use generic DMA helper") So an UART without the RTS/CTS lines may also enables the DMA support, in which case the UART may gets unpredictable results. This patch adds an optional property for the UART DT node which indicates the UART has RTS and CTS lines, and it also means you enable the DMA support for this UART. This patch also adds a macro MXS_AUART_RTSCTS, and uses it to check RTS/CTS before we enable the DMA for the UART. Signed-off-by: Huang Shijie Signed-off-by: Huang Shijie Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt index 2c00ec6..59a40f1 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt @@ -10,6 +10,10 @@ Required properties: Refer to dma.txt and fsl-mxs-dma.txt for details. - dma-names: "rx" for RX channel, "tx" for TX channel. +Optional properties: +- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines, + it also means you enable the DMA support for this UART. + Example: auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 736e95c..eac7b58 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -137,6 +137,7 @@ struct mxs_auart_port { #define MXS_AUART_DMA_ENABLED 0x2 #define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ #define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ +#define MXS_AUART_RTSCTS 4 /* bit 4 */ unsigned long flags; unsigned int ctrl; enum mxs_auart_type devtype; @@ -639,7 +640,8 @@ static void mxs_auart_settermios(struct uart_port *u, * we can only implement the DMA support for auart * in mx28. */ - if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG)) { + if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG) + && test_bit(MXS_AUART_RTSCTS, &s->flags)) { if (!mxs_auart_dma_init(s)) /* enable DMA tranfer */ ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE @@ -1009,6 +1011,9 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, s->flags |= MXS_AUART_DMA_CONFIG; + if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) + set_bit(MXS_AUART_RTSCTS, &s->flags); + return 0; } -- cgit v0.10.2 From afab220396bf9a728098996d73775fd1aaa712f8 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Sat, 3 Aug 2013 10:09:15 -0400 Subject: serial: mxs: remove the MXS_AUART_DMA_CONFIG The MXS_AUART_DMA_CONFIG is originally used to check if the DT node is configured with the DMA property. But now, the MXS_AUART_DMA_CONFIG is set unconditionally in the serial_mxs_probe_dt(), so the check in the mxs_auart_settermios() is not necessary anymore. This patch removes this macro. Signed-off-by: Huang Shijie Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index eac7b58..10e9d70 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -133,7 +133,6 @@ enum mxs_auart_type { struct mxs_auart_port { struct uart_port port; -#define MXS_AUART_DMA_CONFIG 0x1 #define MXS_AUART_DMA_ENABLED 0x2 #define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ #define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ @@ -640,7 +639,7 @@ static void mxs_auart_settermios(struct uart_port *u, * we can only implement the DMA support for auart * in mx28. */ - if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG) + if (is_imx28_auart(s) && test_bit(MXS_AUART_RTSCTS, &s->flags)) { if (!mxs_auart_dma_init(s)) /* enable DMA tranfer */ @@ -1009,8 +1008,6 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, } s->port.line = ret; - s->flags |= MXS_AUART_DMA_CONFIG; - if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) set_bit(MXS_AUART_RTSCTS, &s->flags); -- cgit v0.10.2 From b2755b761a47ae42094bbab64d40490694ec08c3 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Sat, 3 Aug 2013 10:09:16 -0400 Subject: ARM: dts: imx28-evk: add the RTS/CTS property for auart0 Add the RTS/CTS property for auart0 which means we enable the DMA support for it. Signed-off-by: Huang Shijie Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e035f46..15715d9 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -220,6 +220,7 @@ auart0: serial@8006a000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; + fsl,uart-has-rtscts; status = "okay"; }; -- cgit v0.10.2 From 3855ae1c486a2d1b65a96fac8d504ef7197e62cd Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 4 Aug 2013 13:09:50 +0200 Subject: vt: make the default color configurable The virtual console has (undocumented) module parameters to set the colors for italic and underlined text, but the default text color was hardcoded for some reason. This made it impossible to change the color for startup messages, or to set the default for new virtual consoles. Add a module parameter for that, and document the entire bunch. Any hacker who thinks that a command prompt on a "black screen with white font" is not supicious enough can now use the kernel parameter vt.color=10 to get a nice, evil green. Signed-off-by: Clemens Ladisch Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 15356ac..f6c8b41 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3322,6 +3322,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. them quite hard to use for exploits but might break your system. + vt.color= [VT] Default text color. + Format: 0xYX, X = foreground, Y = background. + Default: 0x07 = light gray on black. + vt.cur_default= [VT] Default cursor shape. Format: 0xCCBBAA, where AA, BB, and CC are the same as the parameters of the [?A;B;Cc escape sequence; @@ -3361,6 +3365,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. overridden by individual drivers. 0 will hide cursors, 1 will display them. + vt.italic= [VT] Default color for italic text; 0-15. + Default: 2 = green. + + vt.underline= [VT] Default color for underlined text; 0-15. + Default: 3 = cyan. + watchdog timers [HW,WDT] For information on watchdog timers, see Documentation/watchdog/watchdog-parameters.txt or other driver-specific files in the diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 02af6cc..9a8e8c5 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2809,8 +2809,10 @@ static void con_shutdown(struct tty_struct *tty) console_unlock(); } +static int default_color = 7; /* white */ static int default_italic_color = 2; // green (ASCII) static int default_underline_color = 3; // cyan (ASCII) +module_param_named(color, default_color, int, S_IRUGO | S_IWUSR); module_param_named(italic, default_italic_color, int, S_IRUGO | S_IWUSR); module_param_named(underline, default_underline_color, int, S_IRUGO | S_IWUSR); @@ -2832,7 +2834,7 @@ static void vc_init(struct vc_data *vc, unsigned int rows, vc->vc_palette[k++] = default_grn[j] ; vc->vc_palette[k++] = default_blu[j] ; } - vc->vc_def_color = 0x07; /* white */ + vc->vc_def_color = default_color; vc->vc_ulcolor = default_underline_color; vc->vc_itcolor = default_italic_color; vc->vc_halfcolor = 0x08; /* grey */ -- cgit v0.10.2 From 16cf48a6d3e8f9ebe3c3231c12cbe4b0c4ed4d24 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Fri, 2 Aug 2013 12:23:34 +0200 Subject: register_console: prevent adding the same console twice MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch guards the console_drivers list to be corrupted. The for_each_console() macro insist on a strictly forward list ended by NULL: con0->next->con1->next->NULL Without this patch it may happen easily to destroy this list for example by adding 'earlyprintk' twice, especially on embedded devices where the early console is often a single static instance. This will result in the following list: con0->next->con0 This in turn will result in an endless loop in console_unlock() later on by printing the first __log_buf line endlessly. Signed-off-by: Andreas Bießmann Cc: Kay Sievers Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 5b5a708..b4e8500 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2226,6 +2226,13 @@ void register_console(struct console *newcon) struct console *bcon = NULL; struct console_cmdline *c; + if (console_drivers) + for_each_console(bcon) + if (WARN(bcon == newcon, + "console '%s%d' already registered\n", + bcon->name, bcon->index)) + return; + /* * before we register a new CON_BOOT console, make sure we don't * already have a valid console -- cgit v0.10.2 From 331b37340af0ce96b6d6701b21b9902c85a8e2c0 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 7 Aug 2013 17:33:55 +0200 Subject: tty: serial: pxa: remove old cruft This #if-0'd block wouldn't compile, so let's dispose it. Signed-off-by: Daniel Mack Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index ac8b2f5..43da578 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -332,31 +332,6 @@ static void serial_pxa_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } -#if 0 -static void serial_pxa_dma_init(struct pxa_uart *up) -{ - up->rxdma = - pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up); - if (up->rxdma < 0) - goto out; - up->txdma = - pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up); - if (up->txdma < 0) - goto err_txdma; - up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL); - if (!up->dmadesc) - goto err_alloc; - - /* ... */ -err_alloc: - pxa_free_dma(up->txdma); -err_rxdma: - pxa_free_dma(up->rxdma); -out: - return; -} -#endif - static int serial_pxa_startup(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; -- cgit v0.10.2 From 6c62cc0db7d9f459c7453adc88a30ab6a626f15c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:39:51 +0900 Subject: serial: pxa: Staticize local symbols These local symbols are used only in this file. Fix the following sparse warnings: drivers/tty/serial/pxa.c:793:17: warning: symbol 'serial_pxa_pops' was not declared. Should it be static? drivers/tty/serial/pxa.c:971:12: warning: symbol 'serial_pxa_init' was not declared. Should it be static? drivers/tty/serial/pxa.c:986:13: warning: symbol 'serial_pxa_exit' was not declared. Should it be static? Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 43da578..f9f20f3 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -765,7 +765,7 @@ static struct console serial_pxa_console = { #define PXA_CONSOLE NULL #endif -struct uart_ops serial_pxa_pops = { +static struct uart_ops serial_pxa_pops = { .tx_empty = serial_pxa_tx_empty, .set_mctrl = serial_pxa_set_mctrl, .get_mctrl = serial_pxa_get_mctrl, @@ -943,7 +943,7 @@ static struct platform_driver serial_pxa_driver = { }, }; -int __init serial_pxa_init(void) +static int __init serial_pxa_init(void) { int ret; @@ -958,7 +958,7 @@ int __init serial_pxa_init(void) return ret; } -void __exit serial_pxa_exit(void) +static void __exit serial_pxa_exit(void) { platform_driver_unregister(&serial_pxa_driver); uart_unregister_driver(&serial_pxa_reg); -- cgit v0.10.2 From aefceaf453024ef4cf8a0f93c4b1edf6c6f748bf Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 11 Aug 2013 08:04:23 -0400 Subject: n_tty: Fix termios_rwsem lockdep false positive Lockdep reports a circular lock dependency between atomic_read_lock and termios_rwsem [1]. However, a lock order deadlock is not possible since CPU1 only holds a read lock which cannot prevent CPU0 from also acquiring a read lock on the same r/w semaphore. Unfortunately, lockdep cannot currently distinguish whether the locks are read or write for any particular lock graph, merely that the locks _were_ previously read and/or write. Until lockdep is fixed, re-order atomic_read_lock so termios_rwsem can be dropped and reacquired without triggering lockdep. Patch based on original posted here https://lkml.org/lkml/2013/8/1/510 by Sergey Senozhatsky [1] Initial lockdep report from Artem Savkov ====================================================== [ INFO: possible circular locking dependency detected ] 3.11.0-rc3-next-20130730+ #140 Tainted: G W ------------------------------------------------------- bash/1198 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [] n_tty_read+0x49b/0x660 but task is already holding lock: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x1d0/0x660 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ldata->atomic_read_lock){+.+...}: [] validate_chain+0x73c/0x850 [] __lock_acquire+0x500/0x5d0 [] lock_acquire+0x179/0x1d0 [] mutex_lock_interruptible_nested+0x7c/0x540 [] n_tty_read+0x1d0/0x660 [] tty_read+0x86/0xf0 [] vfs_read+0xc3/0x130 [] SyS_read+0x62/0xa0 [] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [] check_prev_add+0x14f/0x590 [] validate_chain+0x73c/0x850 [] __lock_acquire+0x500/0x5d0 [] lock_acquire+0x179/0x1d0 [] down_read+0x51/0xa0 [] n_tty_read+0x49b/0x660 [] tty_read+0x86/0xf0 [] vfs_read+0xc3/0x130 [] SyS_read+0x62/0xa0 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ldata->atomic_read_lock); lock(&tty->termios_rwsem); lock(&ldata->atomic_read_lock); lock(&tty->termios_rwsem); *** DEADLOCK *** 2 locks held by bash/1198: #0: (&tty->ldisc_sem){.+.+.+}, at: [] tty_ldisc_ref_wait+0x24/0x60 #1: (&ldata->atomic_read_lock){+.+...}, at: [] n_tty_read+0x1d0/0x660 stack backtrace: CPU: 1 PID: 1198 Comm: bash Tainted: G W 3.11.0-rc3-next-20130730+ #140 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 0000000000000000 ffff880019acdb28 ffffffff81d34074 0000000000000002 0000000000000000 ffff880019acdb78 ffffffff8110ed75 ffff880019acdb98 ffff880019fd0000 ffff880019acdb78 ffff880019fd0638 ffff880019fd0670 Call Trace: [] dump_stack+0x59/0x7d [] print_circular_bug+0x105/0x120 [] check_prev_add+0x14f/0x590 [] ? _raw_spin_unlock_irq+0x4f/0x70 [] validate_chain+0x73c/0x850 [] ? trace_hardirqs_off_caller+0x1f/0x190 [] __lock_acquire+0x500/0x5d0 [] lock_acquire+0x179/0x1d0 [] ? n_tty_read+0x49b/0x660 [] down_read+0x51/0xa0 [] ? n_tty_read+0x49b/0x660 [] n_tty_read+0x49b/0x660 [] ? try_to_wake_up+0x210/0x210 [] tty_read+0x86/0xf0 [] vfs_read+0xc3/0x130 [] SyS_read+0x62/0xa0 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Reported-by: Artem Savkov Reported-by: Sergey Senozhatsky Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index dd8ae0c..c9a9ddd 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2122,6 +2122,17 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (c < 0) return c; + /* + * Internal serialization of reads. + */ + if (file->f_flags & O_NONBLOCK) { + if (!mutex_trylock(&ldata->atomic_read_lock)) + return -EAGAIN; + } else { + if (mutex_lock_interruptible(&ldata->atomic_read_lock)) + return -ERESTARTSYS; + } + down_read(&tty->termios_rwsem); minimum = time = 0; @@ -2141,20 +2152,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, } } - /* - * Internal serialization of reads. - */ - if (file->f_flags & O_NONBLOCK) { - if (!mutex_trylock(&ldata->atomic_read_lock)) { - up_read(&tty->termios_rwsem); - return -EAGAIN; - } - } else { - if (mutex_lock_interruptible(&ldata->atomic_read_lock)) { - up_read(&tty->termios_rwsem); - return -ERESTARTSYS; - } - } packet = tty->packet; add_wait_queue(&tty->read_wait, &wait); -- cgit v0.10.2 From a324e4de0ce5c467b33a54ed65cc2f41c68855ae Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 10 Aug 2013 09:32:15 +0200 Subject: tty: ar933x_uart: convert to use devm_* functions Use devm_* functions in order to simplify cleanup paths. Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 7aa9062..3f5517f 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -652,19 +652,18 @@ static int ar933x_uart_probe(struct platform_device *pdev) return -EINVAL; } - up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL); + up = devm_kzalloc(&pdev->dev, sizeof(struct ar933x_uart_port), + GFP_KERNEL); if (!up) return -ENOMEM; port = &up->port; - port->mapbase = mem_res->start; - port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE); - if (!port->membase) { - ret = -ENOMEM; - goto err_free_up; - } + port->membase = devm_ioremap_resource(&pdev->dev, mem_res); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + port->mapbase = mem_res->start; port->line = id; port->irq = irq_res->start; port->dev = &pdev->dev; @@ -686,16 +685,10 @@ static int ar933x_uart_probe(struct platform_device *pdev) ret = uart_add_one_port(&ar933x_uart_driver, &up->port); if (ret) - goto err_unmap; + return ret; platform_set_drvdata(pdev, up); return 0; - -err_unmap: - iounmap(up->port.membase); -err_free_up: - kfree(up); - return ret; } static int ar933x_uart_remove(struct platform_device *pdev) @@ -704,11 +697,8 @@ static int ar933x_uart_remove(struct platform_device *pdev) up = platform_get_drvdata(pdev); - if (up) { + if (up) uart_remove_one_port(&ar933x_uart_driver, &up->port); - iounmap(up->port.membase); - kfree(up); - } return 0; } -- cgit v0.10.2 From 5c19e95216b93b0d29c6a4887e69a980edc6fc81 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 5 Aug 2013 14:40:44 +0200 Subject: OF: Add helper for matching against linux,stdout-path devicetrees may have a linux,stdout-path property in the chosen node describing the console device. This adds a helper function to match a device against this property so a driver can call add_preferred_console for a matching device. Signed-off-by: Sascha Hauer Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/of/base.c b/drivers/of/base.c index 5c54279..1c3c79c 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -32,6 +32,7 @@ struct device_node *of_allnodes; EXPORT_SYMBOL(of_allnodes); struct device_node *of_chosen; struct device_node *of_aliases; +static struct device_node *of_stdout; DEFINE_MUTEX(of_aliases_mutex); @@ -1595,6 +1596,15 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) of_chosen = of_find_node_by_path("/chosen"); if (of_chosen == NULL) of_chosen = of_find_node_by_path("/chosen@0"); + + if (of_chosen) { + const char *name; + + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name) + of_stdout = of_find_node_by_path(name); + } + of_aliases = of_find_node_by_path("/aliases"); if (!of_aliases) return; @@ -1703,3 +1713,19 @@ const char *of_prop_next_string(struct property *prop, const char *cur) return curv; } EXPORT_SYMBOL_GPL(of_prop_next_string); + +/** + * of_device_is_stdout_path - check if a device node matches the + * linux,stdout-path property + * + * Check if this device node matches the linux,stdout-path property + * in the chosen node. return true if yes, false otherwise. + */ +int of_device_is_stdout_path(struct device_node *dn) +{ + if (!of_stdout) + return false; + + return of_stdout == dn; +} +EXPORT_SYMBOL_GPL(of_device_is_stdout_path); diff --git a/include/linux/of.h b/include/linux/of.h index 1fd08ca..429e168 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -343,6 +343,8 @@ const char *of_prop_next_string(struct property *prop, const char *cur); s; \ s = of_prop_next_string(prop, s)) +int of_device_is_stdout_path(struct device_node *dn); + #else /* CONFIG_OF */ static inline const char* of_node_full_name(struct device_node *np) @@ -505,6 +507,11 @@ static inline int of_machine_is_compatible(const char *compat) return 0; } +static inline int of_device_is_stdout_path(struct device_node *dn) +{ + return 0; +} + #define of_match_ptr(_ptr) NULL #define of_match_node(_matches, _node) NULL #define of_property_for_each_u32(np, propname, prop, p, u) \ -- cgit v0.10.2 From f7d2c0bbdb7b784cc035cacb7d36b379ba1c3bef Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 5 Aug 2013 14:40:45 +0200 Subject: serial: i.MX: evaluate linux,stdout-path property devicetrees may have the linux,stdout-path property to specify the console. This patch adds support to the i.MX serial driver for this. Signed-off-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index a5f32c7..2c13155 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1912,6 +1912,9 @@ static int serial_imx_probe_dt(struct imx_port *sport, sport->devdata = of_id->data; + if (of_device_is_stdout_path(np)) + add_preferred_console(imx_reg.cons->name, sport->port.line, 0); + return 0; } #else -- cgit v0.10.2 From 909102db44faf40bae96d8f9d23de79e1ca0853a Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 7 Aug 2013 13:35:38 +0800 Subject: serial: sirf: add support for Marco chip the marco and coming new CSR multiple SoCs have SET/CLR pair for INTEN registers to avoid some read-modify-write. this patch adds support for this and make the driver support current up and coming mp SoCs. Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 67a0d1b..26a3bc834 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -139,40 +139,66 @@ static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) static void sirfsoc_uart_stop_tx(struct uart_port *port) { + struct sirfsoc_uart_port *sirfport = to_sirfport(port); unsigned int regv; - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN); + + if (!sirfport->is_marco) { + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN); + } else { + wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_TX_INT_EN); + } } void sirfsoc_uart_start_tx(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); unsigned long regv; + sirfsoc_uart_pio_tx_chars(sirfport, 1); wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_START); - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN); + + if (!sirfport->is_marco) { + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN); + } else { + wr_regl(port, SIRFUART_INT_EN, SIRFUART_TX_INT_EN); + } } static void sirfsoc_uart_stop_rx(struct uart_port *port) { + struct sirfsoc_uart_port *sirfport = to_sirfport(port); unsigned long regv; + wr_regl(port, SIRFUART_RX_FIFO_OP, 0); - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN); + + if (!sirfport->is_marco) { + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN); + } else { + wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_RX_IO_INT_EN); + } } static void sirfsoc_uart_disable_ms(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); unsigned long reg; + sirfport->ms_enabled = 0; if (!sirfport->hw_flow_ctrl) return; + reg = rd_regl(port, SIRFUART_AFC_CTRL); wr_regl(port, SIRFUART_AFC_CTRL, reg & ~0x3FF); - reg = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN); + + if (!sirfport->is_marco) { + reg = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN); + } else { + wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_CTS_INT_EN); + } } static void sirfsoc_uart_enable_ms(struct uart_port *port) @@ -180,13 +206,20 @@ static void sirfsoc_uart_enable_ms(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); unsigned long reg; unsigned long flg; + if (!sirfport->hw_flow_ctrl) return; flg = SIRFUART_AFC_RX_EN | SIRFUART_AFC_TX_EN; reg = rd_regl(port, SIRFUART_AFC_CTRL); wr_regl(port, SIRFUART_AFC_CTRL, reg | flg); - reg = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN); + + if (!sirfport->is_marco) { + reg = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN); + } else { + wr_regl(port, SIRFUART_INT_EN, SIRFUART_CTS_INT_EN); + } + uart_handle_cts_change(port, !(rd_regl(port, SIRFUART_AFC_CTRL) & SIRFUART_CTS_IN_STATUS)); sirfport->ms_enabled = 1; @@ -313,9 +346,16 @@ recv_char: static void sirfsoc_uart_start_rx(struct uart_port *port) { - unsigned long regv; - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN); + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + + if (!sirfport->is_marco) { + unsigned long regv; + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN); + } else { + wr_regl(port, SIRFUART_INT_EN, SIRFUART_RX_IO_INT_EN); + } + wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET); wr_regl(port, SIRFUART_RX_FIFO_OP, 0); wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START); @@ -513,7 +553,12 @@ irq_err: static void sirfsoc_uart_shutdown(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - wr_regl(port, SIRFUART_INT_EN, 0); + + if (!sirfport->is_marco) + wr_regl(port, SIRFUART_INT_EN, 0); + else + wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL); + free_irq(port->irq, sirfport); if (sirfport->ms_enabled) { sirfsoc_uart_disable_ms(port); @@ -652,6 +697,9 @@ int sirfsoc_uart_probe(struct platform_device *pdev) port->dev = &pdev->dev; port->private_data = sirfport; + if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-uart")) + sirfport->is_marco = true; + if (of_find_property(pdev->dev.of_node, "hw_flow_ctrl", NULL)) sirfport->hw_flow_ctrl = 1; diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 85328ba..6216660 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -13,6 +13,7 @@ #define SIRFUART_DIVISOR 0x0050 #define SIRFUART_INT_EN 0x0054 #define SIRFUART_INT_STATUS 0x0058 +#define SIRFUART_INT_EN_CLR 0x0060 #define SIRFUART_TX_DMA_IO_CTRL 0x0100 #define SIRFUART_TX_DMA_IO_LEN 0x0104 #define SIRFUART_TX_FIFO_CTRL 0x0108 @@ -164,6 +165,8 @@ struct sirfsoc_uart_port { struct uart_port port; struct pinctrl *p; struct clk *clk; + /* for SiRFmarco, there are SET/CLR for UART_INT_EN */ + bool is_marco; }; /* Hardware Flow Control */ -- cgit v0.10.2 From 5df831117b85a08e7aa469dda97d2ee02181d083 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 12 Aug 2013 18:15:35 +0800 Subject: serial: sirf: make the driver also support USP-based UART Universal Serial Ports (USP) can be used as PCM, UART, SPI, I2S etc. this makes the USP work as UART. the basic work flow is same with UART controller, the main difference will be offset of registers and bits. this patch makes the old sirfsoc uart driver support both sirf UART and USP-based UART by making their differences become private data. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 26a3bc834..f8a4d34 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -99,21 +99,23 @@ static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port) static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port) { unsigned long reg; - reg = rd_regl(port, SIRFUART_TX_FIFO_STATUS); - if (reg & SIRFUART_FIFOEMPTY_MASK(port)) - return TIOCSER_TEMT; - else - return 0; + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; + reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status); + + return (reg & ufifo_st->ff_empty(port->line)) ? TIOCSER_TEMT : 0; } static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; if (!(sirfport->ms_enabled)) { goto cts_asserted; } else if (sirfport->hw_flow_ctrl) { - if (!(rd_regl(port, SIRFUART_AFC_CTRL) & - SIRFUART_CTS_IN_STATUS)) + if (!(rd_regl(port, ureg->sirfsoc_afc_ctrl) & + SIRFUART_AFC_CTS_STATUS)) goto cts_asserted; else goto cts_deasserted; @@ -127,122 +129,145 @@ cts_asserted: static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; unsigned int assert = mctrl & TIOCM_RTS; unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0; unsigned int current_val; if (sirfport->hw_flow_ctrl) { - current_val = rd_regl(port, SIRFUART_AFC_CTRL) & ~0xFF; + current_val = rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0xFF; val |= current_val; - wr_regl(port, SIRFUART_AFC_CTRL, val); + wr_regl(port, ureg->sirfsoc_afc_ctrl, val); } } static void sirfsoc_uart_stop_tx(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned int regv; if (!sirfport->is_marco) { - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN); - } else { - wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_TX_INT_EN); - } + regv = rd_regl(port, ureg->sirfsoc_int_en_reg); + wr_regl(port, ureg->sirfsoc_int_en_reg, + regv & ~uint_en->sirfsoc_txfifo_empty_en); + } else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_txfifo_empty_en); + } void sirfsoc_uart_start_tx(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long regv; sirfsoc_uart_pio_tx_chars(sirfport, 1); - wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_START); - + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); if (!sirfport->is_marco) { - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN); - } else { - wr_regl(port, SIRFUART_INT_EN, SIRFUART_TX_INT_EN); - } + regv = rd_regl(port, ureg->sirfsoc_int_en_reg); + wr_regl(port, ureg->sirfsoc_int_en_reg, regv | + uint_en->sirfsoc_txfifo_empty_en); + } else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_txfifo_empty_en); } static void sirfsoc_uart_stop_rx(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - unsigned long regv; - - wr_regl(port, SIRFUART_RX_FIFO_OP, 0); - + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + unsigned long reg; + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); if (!sirfport->is_marco) { - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN); - } else { - wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_RX_IO_INT_EN); - } + reg = rd_regl(port, ureg->sirfsoc_int_en_reg); + wr_regl(port, ureg->sirfsoc_int_en_reg, + reg & ~(SIRFUART_RX_IO_INT_EN(port, uint_en))); + } else + wr_regl(port, SIRFUART_INT_EN_CLR, + SIRFUART_RX_IO_INT_EN(port, uint_en)); } static void sirfsoc_uart_disable_ms(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long reg; sirfport->ms_enabled = 0; if (!sirfport->hw_flow_ctrl) return; - reg = rd_regl(port, SIRFUART_AFC_CTRL); - wr_regl(port, SIRFUART_AFC_CTRL, reg & ~0x3FF); - + reg = rd_regl(port, ureg->sirfsoc_afc_ctrl); + wr_regl(port, ureg->sirfsoc_afc_ctrl, reg & ~0x3FF); if (!sirfport->is_marco) { - reg = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN); - } else { - wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_CTS_INT_EN); - } + reg = rd_regl(port, ureg->sirfsoc_int_en_reg); + wr_regl(port, ureg->sirfsoc_int_en_reg, + reg & ~uint_en->sirfsoc_cts_en); + } else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_cts_en); } static void sirfsoc_uart_enable_ms(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long reg; unsigned long flg; if (!sirfport->hw_flow_ctrl) return; - flg = SIRFUART_AFC_RX_EN | SIRFUART_AFC_TX_EN; - reg = rd_regl(port, SIRFUART_AFC_CTRL); - wr_regl(port, SIRFUART_AFC_CTRL, reg | flg); - + flg = SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN; + reg = rd_regl(port, ureg->sirfsoc_afc_ctrl); + wr_regl(port, ureg->sirfsoc_afc_ctrl, reg | flg); if (!sirfport->is_marco) { - reg = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN); - } else { - wr_regl(port, SIRFUART_INT_EN, SIRFUART_CTS_INT_EN); - } - + reg = rd_regl(port, ureg->sirfsoc_int_en_reg); + wr_regl(port, ureg->sirfsoc_int_en_reg, + reg | uint_en->sirfsoc_cts_en); + } else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_cts_en); uart_handle_cts_change(port, - !(rd_regl(port, SIRFUART_AFC_CTRL) & SIRFUART_CTS_IN_STATUS)); + !(rd_regl(port, ureg->sirfsoc_afc_ctrl) & + SIRFUART_AFC_CTS_STATUS)); sirfport->ms_enabled = 1; } static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state) { - unsigned long ulcon = rd_regl(port, SIRFUART_LINE_CTRL); - if (break_state) - ulcon |= SIRFUART_SET_BREAK; - else - ulcon &= ~SIRFUART_SET_BREAK; - wr_regl(port, SIRFUART_LINE_CTRL, ulcon); + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + unsigned long ulcon = rd_regl(port, ureg->sirfsoc_line_ctrl); + if (break_state) + ulcon |= SIRFUART_SET_BREAK; + else + ulcon &= ~SIRFUART_SET_BREAK; + wr_regl(port, ureg->sirfsoc_line_ctrl, ulcon); + } } static unsigned int sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) { + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; unsigned int ch, rx_count = 0; - - while (!(rd_regl(port, SIRFUART_RX_FIFO_STATUS) & - SIRFUART_FIFOEMPTY_MASK(port))) { - ch = rd_regl(port, SIRFUART_RX_FIFO_DATA) | SIRFUART_DUMMY_READ; + struct tty_struct *tty; + tty = tty_port_tty_get(&port->state->port); + if (!tty) + return -ENODEV; + while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + ufifo_st->ff_empty(port->line))) { + ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) | + SIRFUART_DUMMY_READ; if (unlikely(uart_handle_sysrq_char(port, ch))) continue; uart_insert_char(port, 0, 0, ch, TTY_NORMAL); @@ -261,13 +286,16 @@ static unsigned int sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count) { struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; struct circ_buf *xmit = &port->state->xmit; unsigned int num_tx = 0; while (!uart_circ_empty(xmit) && - !(rd_regl(port, SIRFUART_TX_FIFO_STATUS) & - SIRFUART_FIFOFULL_MASK(port)) && + !(rd_regl(port, ureg->sirfsoc_tx_fifo_status) & + ufifo_st->ff_full(port->line)) && count--) { - wr_regl(port, SIRFUART_TX_FIFO_DATA, xmit->buf[xmit->tail]); + wr_regl(port, ureg->sirfsoc_tx_fifo_data, + xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; num_tx++; @@ -284,50 +312,52 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) unsigned long flag = TTY_NORMAL; struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; + struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; struct uart_state *state = port->state; struct circ_buf *xmit = &port->state->xmit; spin_lock(&port->lock); - intr_status = rd_regl(port, SIRFUART_INT_STATUS); - wr_regl(port, SIRFUART_INT_STATUS, intr_status); - intr_status &= rd_regl(port, SIRFUART_INT_EN); - if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT))) { - if (intr_status & SIRFUART_RXD_BREAK) { + intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg); + wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status); + if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(port, uint_st)))) { + if (intr_status & uint_st->sirfsoc_rxd_brk) { + port->icount.brk++; if (uart_handle_break(port)) goto recv_char; - uart_insert_char(port, intr_status, - SIRFUART_RX_OFLOW, 0, TTY_BREAK); - spin_unlock(&port->lock); - return IRQ_HANDLED; } - if (intr_status & SIRFUART_RX_OFLOW) + if (intr_status & uint_st->sirfsoc_rx_oflow) port->icount.overrun++; - if (intr_status & SIRFUART_FRM_ERR) { + if (intr_status & uint_st->sirfsoc_frm_err) { port->icount.frame++; flag = TTY_FRAME; } - if (intr_status & SIRFUART_PARITY_ERR) + if (intr_status & uint_st->sirfsoc_parity_err) flag = TTY_PARITY; - wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET); - wr_regl(port, SIRFUART_RX_FIFO_OP, 0); - wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); intr_status &= port->read_status_mask; uart_insert_char(port, intr_status, - SIRFUART_RX_OFLOW_INT, 0, flag); + uint_en->sirfsoc_rx_oflow_en, 0, flag); + tty_flip_buffer_push(&state->port); } recv_char: - if (intr_status & SIRFUART_CTS_INT_EN) { - cts_status = !(rd_regl(port, SIRFUART_AFC_CTRL) & - SIRFUART_CTS_IN_STATUS); - if (cts_status != 0) { - uart_handle_cts_change(port, 1); - } else { - uart_handle_cts_change(port, 0); - wake_up_interruptible(&state->port.delta_msr_wait); - } + if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) && + (intr_status & SIRFUART_CTS_INT_ST(uint_st))) { + cts_status = rd_regl(port, ureg->sirfsoc_afc_ctrl) & + SIRFUART_AFC_CTS_STATUS; + if (cts_status != 0) + cts_status = 0; + else + cts_status = 1; + uart_handle_cts_change(port, cts_status); + wake_up_interruptible(&state->port.delta_msr_wait); } - if (intr_status & SIRFUART_RX_IO_INT_EN) + if (intr_status & SIRFUART_RX_IO_INT_ST(uint_st)) sirfsoc_uart_pio_rx_chars(port, SIRFSOC_UART_IO_RX_MAX_CNT); - if (intr_status & SIRFUART_TX_INT_EN) { + if (intr_status & uint_st->sirfsoc_txfifo_empty) { if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { spin_unlock(&port->lock); return IRQ_HANDLED; @@ -335,8 +365,8 @@ recv_char: sirfsoc_uart_pio_tx_chars(sirfport, SIRFSOC_UART_IO_TX_REASONABLE_CNT); if ((uart_circ_empty(xmit)) && - (rd_regl(port, SIRFUART_TX_FIFO_STATUS) & - SIRFUART_FIFOEMPTY_MASK(port))) + (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & + ufifo_st->ff_empty(port->line))) sirfsoc_uart_stop_tx(port); } } @@ -347,23 +377,54 @@ recv_char: static void sirfsoc_uart_start_rx(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + unsigned long regv; if (!sirfport->is_marco) { - unsigned long regv; - regv = rd_regl(port, SIRFUART_INT_EN); - wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN); - } else { - wr_regl(port, SIRFUART_INT_EN, SIRFUART_RX_IO_INT_EN); - } + regv = rd_regl(port, ureg->sirfsoc_int_en_reg); + wr_regl(port, ureg->sirfsoc_int_en_reg, regv | + SIRFUART_RX_IO_INT_EN(port, uint_en)); + } else + wr_regl(port, ureg->sirfsoc_int_en_reg, + SIRFUART_RX_IO_INT_EN(port, uint_en)); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); +} + +static unsigned int +sirfsoc_usp_calc_sample_div(unsigned long set_rate, + unsigned long ioclk_rate, unsigned long *sample_reg) +{ + unsigned long min_delta = ~0UL; + unsigned short sample_div; + unsigned long ioclk_div = 0; + unsigned long temp_delta; + + for (sample_div = SIRF_MIN_SAMPLE_DIV; + sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) { + temp_delta = ioclk_rate - + (ioclk_rate + (set_rate * sample_div) / 2) + / (set_rate * sample_div) * set_rate * sample_div; - wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET); - wr_regl(port, SIRFUART_RX_FIFO_OP, 0); - wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START); + temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta; + if (temp_delta < min_delta) { + ioclk_div = (2 * ioclk_rate / + (set_rate * sample_div) + 1) / 2 - 1; + if (ioclk_div > SIRF_IOCLK_DIV_MAX) + continue; + min_delta = temp_delta; + *sample_reg = sample_div; + if (!temp_delta) + break; + } + } + return ioclk_div; } static unsigned int -sirfsoc_calc_sample_div(unsigned long baud_rate, - unsigned long ioclk_rate, unsigned long *setted_baud) +sirfsoc_uart_calc_sample_div(unsigned long baud_rate, + unsigned long ioclk_rate, unsigned long *set_baud) { unsigned long min_delta = ~0UL; unsigned short sample_div; @@ -386,7 +447,7 @@ sirfsoc_calc_sample_div(unsigned long baud_rate, regv = regv & (~SIRF_SAMPLE_DIV_MASK); regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT); min_delta = temp_delta; - *setted_baud = baud_tmp; + *set_baud = baud_tmp; } } return regv; @@ -397,63 +458,96 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, struct ktermios *old) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long config_reg = 0; unsigned long baud_rate; - unsigned long setted_baud; + unsigned long set_baud; unsigned long flags; unsigned long ic; unsigned int clk_div_reg = 0; - unsigned long temp_reg_val; + unsigned long temp_reg_val, ioclk_rate; unsigned long rx_time_out; int threshold_div; int temp; + u32 data_bit_len, stop_bit_len, len_val; + unsigned long sample_div_reg = 0xf; + ioclk_rate = port->uartclk; switch (termios->c_cflag & CSIZE) { default: case CS8: + data_bit_len = 8; config_reg |= SIRFUART_DATA_BIT_LEN_8; break; case CS7: + data_bit_len = 7; config_reg |= SIRFUART_DATA_BIT_LEN_7; break; case CS6: + data_bit_len = 6; config_reg |= SIRFUART_DATA_BIT_LEN_6; break; case CS5: + data_bit_len = 5; config_reg |= SIRFUART_DATA_BIT_LEN_5; break; } - if (termios->c_cflag & CSTOPB) + if (termios->c_cflag & CSTOPB) { config_reg |= SIRFUART_STOP_BIT_LEN_2; - baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000); + stop_bit_len = 2; + } else + stop_bit_len = 1; + spin_lock_irqsave(&port->lock, flags); - port->read_status_mask = SIRFUART_RX_OFLOW_INT; + port->read_status_mask = uint_en->sirfsoc_rx_oflow_en; port->ignore_status_mask = 0; - /* read flags */ - if (termios->c_iflag & INPCK) - port->read_status_mask |= - SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + if (termios->c_iflag & INPCK) + port->read_status_mask |= uint_en->sirfsoc_frm_err_en | + uint_en->sirfsoc_parity_err_en; + } + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + if (termios->c_iflag & INPCK) + port->read_status_mask |= uint_en->sirfsoc_frm_err_en; + } if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= SIRFUART_RXD_BREAK_INT; - /* ignore flags */ - if (termios->c_iflag & IGNPAR) + port->read_status_mask |= uint_en->sirfsoc_rxd_brk_en; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + uint_en->sirfsoc_frm_err_en | + uint_en->sirfsoc_parity_err_en; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + config_reg |= SIRFUART_STICK_BIT_MARK; + else + config_reg |= SIRFUART_STICK_BIT_SPACE; + } else if (termios->c_cflag & PARODD) { + config_reg |= SIRFUART_STICK_BIT_ODD; + } else { + config_reg |= SIRFUART_STICK_BIT_EVEN; + } + } + } + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + uint_en->sirfsoc_frm_err_en; + if (termios->c_cflag & PARENB) + dev_warn(port->dev, + "USP-UART not support parity err\n"); + } + if (termios->c_iflag & IGNBRK) { port->ignore_status_mask |= - SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT; + uint_en->sirfsoc_rxd_brk_en; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + uint_en->sirfsoc_rx_oflow_en; + } if ((termios->c_cflag & CREAD) == 0) port->ignore_status_mask |= SIRFUART_DUMMY_READ; - /* enable parity if PARENB is set*/ - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - config_reg |= SIRFUART_STICK_BIT_MARK; - else - config_reg |= SIRFUART_STICK_BIT_SPACE; - } else if (termios->c_cflag & PARODD) { - config_reg |= SIRFUART_STICK_BIT_ODD; - } else { - config_reg |= SIRFUART_STICK_BIT_EVEN; - } - } /* Hardware Flow Control Settings */ if (UART_ENABLE_MS(port, termios->c_cflag)) { if (!sirfport->ms_enabled) @@ -462,70 +556,107 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, if (sirfport->ms_enabled) sirfsoc_uart_disable_ms(port); } - - if (port->uartclk == 150000000) { - /* common rate: fast calculation */ + baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000); + if (ioclk_rate == 150000000) { for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++) if (baud_rate == baudrate_to_regv[ic].baud_rate) clk_div_reg = baudrate_to_regv[ic].reg_val; } + set_baud = baud_rate; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + if (unlikely(clk_div_reg == 0)) + clk_div_reg = sirfsoc_uart_calc_sample_div(baud_rate, + ioclk_rate, &set_baud); + wr_regl(port, ureg->sirfsoc_divisor, clk_div_reg); + } + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + clk_div_reg = sirfsoc_usp_calc_sample_div(baud_rate, + ioclk_rate, &sample_div_reg); + sample_div_reg--; + set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) / + (sample_div_reg + 1)); + /* setting usp mode 2 */ + len_val = ((1 << 0) | (1 << 8)); + len_val |= ((clk_div_reg & 0x3ff) << 21); + wr_regl(port, ureg->sirfsoc_mode2, + len_val); - setted_baud = baud_rate; - /* arbitary rate setting */ - if (unlikely(clk_div_reg == 0)) - clk_div_reg = sirfsoc_calc_sample_div(baud_rate, port->uartclk, - &setted_baud); - wr_regl(port, SIRFUART_DIVISOR, clk_div_reg); - + } if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, setted_baud, setted_baud); - - /* set receive timeout */ - rx_time_out = SIRFSOC_UART_RX_TIMEOUT(baud_rate, 20000); - rx_time_out = (rx_time_out > 0xFFFF) ? 0xFFFF : rx_time_out; - config_reg |= SIRFUART_RECV_TIMEOUT(rx_time_out); - temp_reg_val = rd_regl(port, SIRFUART_TX_FIFO_OP); - wr_regl(port, SIRFUART_RX_FIFO_OP, 0); - wr_regl(port, SIRFUART_TX_FIFO_OP, - temp_reg_val & ~SIRFUART_TX_FIFO_START); - wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, SIRFUART_TX_MODE_IO); - wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, SIRFUART_RX_MODE_IO); - wr_regl(port, SIRFUART_LINE_CTRL, config_reg); - + tty_termios_encode_baud_rate(termios, set_baud, set_baud); + /* set receive timeout && data bits len */ + rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000); + rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out); + temp_reg_val = rd_regl(port, ureg->sirfsoc_tx_fifo_op); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, + (temp_reg_val & ~SIRFUART_FIFO_START)); + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + config_reg |= SIRFUART_RECV_TIMEOUT(port, rx_time_out); + wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); + } + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + /*tx frame ctrl*/ + len_val = (data_bit_len - 1) << 0; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << 16; + len_val |= ((data_bit_len - 1) << 24); + len_val |= (((clk_div_reg & 0xc00) >> 10) << 30); + wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val); + /*rx frame ctrl*/ + len_val = (data_bit_len - 1) << 0; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << 8; + len_val |= (data_bit_len - 1) << 16; + len_val |= (((clk_div_reg & 0xf000) >> 12) << 24); + wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val); + /*async param*/ + wr_regl(port, ureg->sirfsoc_async_param_reg, + (SIRFUART_RECV_TIMEOUT(port, rx_time_out)) | + (sample_div_reg & 0x3f) << 16); + } + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE); /* Reset Rx/Tx FIFO Threshold level for proper baudrate */ - if (baud_rate < 1000000) + if (set_baud < 1000000) threshold_div = 1; else threshold_div = 2; - temp = port->line == 1 ? 16 : 64; - wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp / threshold_div); - wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp / threshold_div); - temp_reg_val |= SIRFUART_TX_FIFO_START; - wr_regl(port, SIRFUART_TX_FIFO_OP, temp_reg_val); - uart_update_timeout(port, termios->c_cflag, baud_rate); + temp = SIRFUART_FIFO_THD(port); + wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, temp / threshold_div); + wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, temp / threshold_div); + temp_reg_val |= SIRFUART_FIFO_START; + wr_regl(port, ureg->sirfsoc_tx_fifo_op, temp_reg_val); + uart_update_timeout(port, termios->c_cflag, set_baud); sirfsoc_uart_start_rx(port); - wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_TX_EN | SIRFUART_RX_EN); + wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN); spin_unlock_irqrestore(&port->lock, flags); } static void startup_uart_controller(struct uart_port *port) { + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; unsigned long temp_regv; int temp; - temp_regv = rd_regl(port, SIRFUART_TX_DMA_IO_CTRL); - wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, temp_regv | SIRFUART_TX_MODE_IO); - temp_regv = rd_regl(port, SIRFUART_RX_DMA_IO_CTRL); - wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, temp_regv | SIRFUART_RX_MODE_IO); - wr_regl(port, SIRFUART_TX_DMA_IO_LEN, 0); - wr_regl(port, SIRFUART_RX_DMA_IO_LEN, 0); - wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_RX_EN | SIRFUART_TX_EN); - wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_RESET); - wr_regl(port, SIRFUART_TX_FIFO_OP, 0); - wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET); - wr_regl(port, SIRFUART_RX_FIFO_OP, 0); - temp = port->line == 1 ? 16 : 64; - wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp); - wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp); + temp_regv = rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl); + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, temp_regv | + SIRFUART_IO_MODE); + temp_regv = rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl); + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, temp_regv | + SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0); + wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0); + wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN); + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_mode1, + SIRFSOC_USP_ENDIAN_CTRL_LSBF | + SIRFSOC_USP_EN); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + temp = SIRFUART_FIFO_THD(port); + wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, temp); + wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, temp); } static int sirfsoc_uart_startup(struct uart_port *port) @@ -553,9 +684,9 @@ irq_err: static void sirfsoc_uart_shutdown(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; if (!sirfport->is_marco) - wr_regl(port, SIRFUART_INT_EN, 0); + wr_regl(port, ureg->sirfsoc_int_en_reg, 0); else wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL); @@ -573,9 +704,11 @@ static const char *sirfsoc_uart_type(struct uart_port *port) static int sirfsoc_uart_request_port(struct uart_port *port) { + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_uart_param *uart_param = &sirfport->uart_reg->uart_param; void *ret; ret = request_mem_region(port->mapbase, - SIRFUART_MAP_SIZE, SIRFUART_PORT_NAME); + SIRFUART_MAP_SIZE, uart_param->port_name); return ret ? 0 : -EBUSY; } @@ -611,32 +744,42 @@ static struct uart_ops sirfsoc_uart_ops = { }; #ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE -static int __init sirfsoc_uart_console_setup(struct console *co, char *options) +static int __init +sirfsoc_uart_console_setup(struct console *co, char *options) { unsigned int baud = 115200; unsigned int bits = 8; unsigned int parity = 'n'; unsigned int flow = 'n'; struct uart_port *port = &sirfsoc_uart_ports[co->index].port; - + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; if (co->index < 0 || co->index >= SIRFSOC_UART_NR) return -EINVAL; if (!port->mapbase) return -ENODEV; + /* enable usp in mode1 register */ + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN | + SIRFSOC_USP_ENDIAN_CTRL_LSBF); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); port->cons = co; + return uart_set_options(port, co, baud, parity, bits, flow); } static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) { + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; while (rd_regl(port, - SIRFUART_TX_FIFO_STATUS) & SIRFUART_FIFOFULL_MASK(port)) + ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line)) cpu_relax(); - wr_regb(port, SIRFUART_TX_FIFO_DATA, ch); + wr_regb(port, ureg->sirfsoc_tx_fifo_data, ch); } static void sirfsoc_uart_console_write(struct console *co, const char *s, @@ -678,25 +821,42 @@ static struct uart_driver sirfsoc_uart_drv = { #endif }; +static struct of_device_id sirfsoc_uart_ids[] = { + { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,}, + { .compatible = "sirf,marco-uart", .data = &sirfsoc_uart}, + { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp}, + {} +}; +MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids); + int sirfsoc_uart_probe(struct platform_device *pdev) { struct sirfsoc_uart_port *sirfport; struct uart_port *port; struct resource *res; int ret; + const struct of_device_id *match; + match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node); if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) { dev_err(&pdev->dev, "Unable to find cell-index in uart node.\n"); ret = -EFAULT; goto err; } - + if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) + pdev->id += ((struct sirfsoc_uart_register *) + match->data)->uart_param.register_uart_nr; sirfport = &sirfsoc_uart_ports[pdev->id]; port = &sirfport->port; port->dev = &pdev->dev; port->private_data = sirfport; + sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data; + if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) + sirfport->uart_reg->uart_type = SIRF_REAL_UART; + if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) + sirfport->uart_reg->uart_type = SIRF_USP_UART; if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-uart")) sirfport->is_marco = true; @@ -735,10 +895,9 @@ int sirfsoc_uart_probe(struct platform_device *pdev) if (sirfport->hw_flow_ctrl) { sirfport->p = pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(sirfport->p)) { - ret = PTR_ERR(sirfport->p); + ret = IS_ERR(sirfport->p); + if (ret) goto err; - } } sirfport->clk = clk_get(&pdev->dev, NULL); @@ -801,13 +960,6 @@ static int sirfsoc_uart_resume(struct platform_device *pdev) return 0; } -static struct of_device_id sirfsoc_uart_ids[] = { - { .compatible = "sirf,prima2-uart", }, - { .compatible = "sirf,marco-uart", }, - {} -}; -MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids); - static struct platform_driver sirfsoc_uart_driver = { .probe = sirfsoc_uart_probe, .remove = sirfsoc_uart_remove, diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 6216660..6f6d275 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -6,32 +6,260 @@ * Licensed under GPLv2 or later. */ #include +struct sirfsoc_uart_param { + const char *uart_name; + const char *port_name; + u32 uart_nr; + u32 register_uart_nr; +}; + +struct sirfsoc_register { + /* hardware uart specific */ + u32 sirfsoc_line_ctrl; + u32 sirfsoc_divisor; + /* uart - usp common */ + u32 sirfsoc_tx_rx_en; + u32 sirfsoc_int_en_reg; + u32 sirfsoc_int_st_reg; + u32 sirfsoc_tx_dma_io_ctrl; + u32 sirfsoc_tx_dma_io_len; + u32 sirfsoc_tx_fifo_ctrl; + u32 sirfsoc_tx_fifo_level_chk; + u32 sirfsoc_tx_fifo_op; + u32 sirfsoc_tx_fifo_status; + u32 sirfsoc_tx_fifo_data; + u32 sirfsoc_rx_dma_io_ctrl; + u32 sirfsoc_rx_dma_io_len; + u32 sirfsoc_rx_fifo_ctrl; + u32 sirfsoc_rx_fifo_level_chk; + u32 sirfsoc_rx_fifo_op; + u32 sirfsoc_rx_fifo_status; + u32 sirfsoc_rx_fifo_data; + u32 sirfsoc_afc_ctrl; + u32 sirfsoc_swh_dma_io; + /* hardware usp specific */ + u32 sirfsoc_mode1; + u32 sirfsoc_mode2; + u32 sirfsoc_tx_frame_ctrl; + u32 sirfsoc_rx_frame_ctrl; + u32 sirfsoc_async_param_reg; +}; + +typedef u32 (*fifo_full_mask)(int line); +typedef u32 (*fifo_empty_mask)(int line); + +struct sirfsoc_fifo_status { + fifo_full_mask ff_full; + fifo_empty_mask ff_empty; +}; + +struct sirfsoc_int_en { + u32 sirfsoc_rx_done_en; + u32 sirfsoc_tx_done_en; + u32 sirfsoc_rx_oflow_en; + u32 sirfsoc_tx_allout_en; + u32 sirfsoc_rx_io_dma_en; + u32 sirfsoc_tx_io_dma_en; + u32 sirfsoc_rxfifo_full_en; + u32 sirfsoc_txfifo_empty_en; + u32 sirfsoc_rxfifo_thd_en; + u32 sirfsoc_txfifo_thd_en; + u32 sirfsoc_frm_err_en; + u32 sirfsoc_rxd_brk_en; + u32 sirfsoc_rx_timeout_en; + u32 sirfsoc_parity_err_en; + u32 sirfsoc_cts_en; + u32 sirfsoc_rts_en; +}; + +struct sirfsoc_int_status { + u32 sirfsoc_rx_done; + u32 sirfsoc_tx_done; + u32 sirfsoc_rx_oflow; + u32 sirfsoc_tx_allout; + u32 sirfsoc_rx_io_dma; + u32 sirfsoc_tx_io_dma; + u32 sirfsoc_rxfifo_full; + u32 sirfsoc_txfifo_empty; + u32 sirfsoc_rxfifo_thd; + u32 sirfsoc_txfifo_thd; + u32 sirfsoc_frm_err; + u32 sirfsoc_rxd_brk; + u32 sirfsoc_rx_timeout; + u32 sirfsoc_parity_err; + u32 sirfsoc_cts; + u32 sirfsoc_rts; +}; + +enum sirfsoc_uart_type { + SIRF_REAL_UART, + SIRF_USP_UART, +}; + +struct sirfsoc_uart_register { + struct sirfsoc_register uart_reg; + struct sirfsoc_int_en uart_int_en; + struct sirfsoc_int_status uart_int_st; + struct sirfsoc_fifo_status fifo_status; + struct sirfsoc_uart_param uart_param; + enum sirfsoc_uart_type uart_type; +}; -/* UART Register Offset Define */ -#define SIRFUART_LINE_CTRL 0x0040 -#define SIRFUART_TX_RX_EN 0x004c -#define SIRFUART_DIVISOR 0x0050 -#define SIRFUART_INT_EN 0x0054 -#define SIRFUART_INT_STATUS 0x0058 -#define SIRFUART_INT_EN_CLR 0x0060 -#define SIRFUART_TX_DMA_IO_CTRL 0x0100 -#define SIRFUART_TX_DMA_IO_LEN 0x0104 -#define SIRFUART_TX_FIFO_CTRL 0x0108 -#define SIRFUART_TX_FIFO_LEVEL_CHK 0x010C -#define SIRFUART_TX_FIFO_OP 0x0110 -#define SIRFUART_TX_FIFO_STATUS 0x0114 -#define SIRFUART_TX_FIFO_DATA 0x0118 -#define SIRFUART_RX_DMA_IO_CTRL 0x0120 -#define SIRFUART_RX_DMA_IO_LEN 0x0124 -#define SIRFUART_RX_FIFO_CTRL 0x0128 -#define SIRFUART_RX_FIFO_LEVEL_CHK 0x012C -#define SIRFUART_RX_FIFO_OP 0x0130 -#define SIRFUART_RX_FIFO_STATUS 0x0134 -#define SIRFUART_RX_FIFO_DATA 0x0138 -#define SIRFUART_AFC_CTRL 0x0140 -#define SIRFUART_SWH_DMA_IO 0x0148 - -/* UART Line Control Register */ +u32 usp_ff_full(int line) +{ + return 0x80; +} +u32 usp_ff_empty(int line) +{ + return 0x100; +} +u32 uart_ff_full(int line) +{ + return (line == 1) ? (0x20) : (0x80); +} +u32 uart_ff_empty(int line) +{ + return (line == 1) ? (0x40) : (0x100); +} +struct sirfsoc_uart_register sirfsoc_usp = { + .uart_reg = { + .sirfsoc_mode1 = 0x0000, + .sirfsoc_mode2 = 0x0004, + .sirfsoc_tx_frame_ctrl = 0x0008, + .sirfsoc_rx_frame_ctrl = 0x000c, + .sirfsoc_tx_rx_en = 0x0010, + .sirfsoc_int_en_reg = 0x0014, + .sirfsoc_int_st_reg = 0x0018, + .sirfsoc_async_param_reg = 0x0024, + .sirfsoc_tx_dma_io_ctrl = 0x0100, + .sirfsoc_tx_dma_io_len = 0x0104, + .sirfsoc_tx_fifo_ctrl = 0x0108, + .sirfsoc_tx_fifo_level_chk = 0x010c, + .sirfsoc_tx_fifo_op = 0x0110, + .sirfsoc_tx_fifo_status = 0x0114, + .sirfsoc_tx_fifo_data = 0x0118, + .sirfsoc_rx_dma_io_ctrl = 0x0120, + .sirfsoc_rx_dma_io_len = 0x0124, + .sirfsoc_rx_fifo_ctrl = 0x0128, + .sirfsoc_rx_fifo_level_chk = 0x012c, + .sirfsoc_rx_fifo_op = 0x0130, + .sirfsoc_rx_fifo_status = 0x0134, + .sirfsoc_rx_fifo_data = 0x0138, + }, + .uart_int_en = { + .sirfsoc_rx_done_en = BIT(0), + .sirfsoc_tx_done_en = BIT(1), + .sirfsoc_rx_oflow_en = BIT(2), + .sirfsoc_tx_allout_en = BIT(3), + .sirfsoc_rx_io_dma_en = BIT(4), + .sirfsoc_tx_io_dma_en = BIT(5), + .sirfsoc_rxfifo_full_en = BIT(6), + .sirfsoc_txfifo_empty_en = BIT(7), + .sirfsoc_rxfifo_thd_en = BIT(8), + .sirfsoc_txfifo_thd_en = BIT(9), + .sirfsoc_frm_err_en = BIT(10), + .sirfsoc_rx_timeout_en = BIT(11), + .sirfsoc_rxd_brk_en = BIT(15), + }, + .uart_int_st = { + .sirfsoc_rx_done = BIT(0), + .sirfsoc_tx_done = BIT(1), + .sirfsoc_rx_oflow = BIT(2), + .sirfsoc_tx_allout = BIT(3), + .sirfsoc_rx_io_dma = BIT(4), + .sirfsoc_tx_io_dma = BIT(5), + .sirfsoc_rxfifo_full = BIT(6), + .sirfsoc_txfifo_empty = BIT(7), + .sirfsoc_rxfifo_thd = BIT(8), + .sirfsoc_txfifo_thd = BIT(9), + .sirfsoc_frm_err = BIT(10), + .sirfsoc_rx_timeout = BIT(11), + .sirfsoc_rxd_brk = BIT(15), + }, + .fifo_status = { + .ff_full = usp_ff_full, + .ff_empty = usp_ff_empty, + }, + .uart_param = { + .uart_name = "ttySiRF", + .port_name = "sirfsoc-uart", + .uart_nr = 2, + .register_uart_nr = 3, + }, +}; + +struct sirfsoc_uart_register sirfsoc_uart = { + .uart_reg = { + .sirfsoc_line_ctrl = 0x0040, + .sirfsoc_tx_rx_en = 0x004c, + .sirfsoc_divisor = 0x0050, + .sirfsoc_int_en_reg = 0x0054, + .sirfsoc_int_st_reg = 0x0058, + .sirfsoc_tx_dma_io_ctrl = 0x0100, + .sirfsoc_tx_dma_io_len = 0x0104, + .sirfsoc_tx_fifo_ctrl = 0x0108, + .sirfsoc_tx_fifo_level_chk = 0x010c, + .sirfsoc_tx_fifo_op = 0x0110, + .sirfsoc_tx_fifo_status = 0x0114, + .sirfsoc_tx_fifo_data = 0x0118, + .sirfsoc_rx_dma_io_ctrl = 0x0120, + .sirfsoc_rx_dma_io_len = 0x0124, + .sirfsoc_rx_fifo_ctrl = 0x0128, + .sirfsoc_rx_fifo_level_chk = 0x012c, + .sirfsoc_rx_fifo_op = 0x0130, + .sirfsoc_rx_fifo_status = 0x0134, + .sirfsoc_rx_fifo_data = 0x0138, + .sirfsoc_afc_ctrl = 0x0140, + .sirfsoc_swh_dma_io = 0x0148, + }, + .uart_int_en = { + .sirfsoc_rx_done_en = BIT(0), + .sirfsoc_tx_done_en = BIT(1), + .sirfsoc_rx_oflow_en = BIT(2), + .sirfsoc_tx_allout_en = BIT(3), + .sirfsoc_rx_io_dma_en = BIT(4), + .sirfsoc_tx_io_dma_en = BIT(5), + .sirfsoc_rxfifo_full_en = BIT(6), + .sirfsoc_txfifo_empty_en = BIT(7), + .sirfsoc_rxfifo_thd_en = BIT(8), + .sirfsoc_txfifo_thd_en = BIT(9), + .sirfsoc_frm_err_en = BIT(10), + .sirfsoc_rxd_brk_en = BIT(11), + .sirfsoc_rx_timeout_en = BIT(12), + .sirfsoc_parity_err_en = BIT(13), + .sirfsoc_cts_en = BIT(14), + .sirfsoc_rts_en = BIT(15), + }, + .uart_int_st = { + .sirfsoc_rx_done = BIT(0), + .sirfsoc_tx_done = BIT(1), + .sirfsoc_rx_oflow = BIT(2), + .sirfsoc_tx_allout = BIT(3), + .sirfsoc_rx_io_dma = BIT(4), + .sirfsoc_tx_io_dma = BIT(5), + .sirfsoc_rxfifo_full = BIT(6), + .sirfsoc_txfifo_empty = BIT(7), + .sirfsoc_rxfifo_thd = BIT(8), + .sirfsoc_txfifo_thd = BIT(9), + .sirfsoc_frm_err = BIT(10), + .sirfsoc_rxd_brk = BIT(11), + .sirfsoc_rx_timeout = BIT(12), + .sirfsoc_parity_err = BIT(13), + .sirfsoc_cts = BIT(14), + .sirfsoc_rts = BIT(15), + }, + .fifo_status = { + .ff_full = uart_ff_full, + .ff_empty = uart_ff_empty, + }, + .uart_param = { + .uart_name = "ttySiRF", + .port_name = "sirfsoc_uart", + .uart_nr = 3, + .register_uart_nr = 0, + }, +}; +/* uart io ctrl */ #define SIRFUART_DATA_BIT_LEN_MASK 0x3 #define SIRFUART_DATA_BIT_LEN_5 BIT(0) #define SIRFUART_DATA_BIT_LEN_6 1 @@ -51,89 +279,65 @@ #define SIRFUART_LOOP_BACK BIT(7) #define SIRFUART_PARITY_MASK (7 << 3) #define SIRFUART_DUMMY_READ BIT(16) - -#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) -#define SIRFUART_RECV_TIMEOUT_MASK (0xFFFF << 16) -#define SIRFUART_RECV_TIMEOUT(x) (((x) & 0xFFFF) << 16) - -/* UART Auto Flow Control */ -#define SIRFUART_AFC_RX_THD_MASK 0x000000FF +#define SIRFUART_AFC_CTRL_RX_THD 0x70 #define SIRFUART_AFC_RX_EN BIT(8) #define SIRFUART_AFC_TX_EN BIT(9) -#define SIRFUART_CTS_CTRL BIT(10) -#define SIRFUART_RTS_CTRL BIT(11) -#define SIRFUART_CTS_IN_STATUS BIT(12) -#define SIRFUART_RTS_OUT_STATUS BIT(13) - -/* UART Interrupt Enable Register */ -#define SIRFUART_RX_DONE_INT BIT(0) -#define SIRFUART_TX_DONE_INT BIT(1) -#define SIRFUART_RX_OFLOW_INT BIT(2) -#define SIRFUART_TX_ALLOUT_INT BIT(3) -#define SIRFUART_RX_IO_DMA_INT BIT(4) -#define SIRFUART_TX_IO_DMA_INT BIT(5) -#define SIRFUART_RXFIFO_FULL_INT BIT(6) -#define SIRFUART_TXFIFO_EMPTY_INT BIT(7) -#define SIRFUART_RXFIFO_THD_INT BIT(8) -#define SIRFUART_TXFIFO_THD_INT BIT(9) -#define SIRFUART_FRM_ERR_INT BIT(10) -#define SIRFUART_RXD_BREAK_INT BIT(11) -#define SIRFUART_RX_TIMEOUT_INT BIT(12) -#define SIRFUART_PARITY_ERR_INT BIT(13) -#define SIRFUART_CTS_INT_EN BIT(14) -#define SIRFUART_RTS_INT_EN BIT(15) - -/* UART Interrupt Status Register */ -#define SIRFUART_RX_DONE BIT(0) -#define SIRFUART_TX_DONE BIT(1) -#define SIRFUART_RX_OFLOW BIT(2) -#define SIRFUART_TX_ALL_EMPTY BIT(3) -#define SIRFUART_DMA_IO_RX_DONE BIT(4) -#define SIRFUART_DMA_IO_TX_DONE BIT(5) -#define SIRFUART_RXFIFO_FULL BIT(6) -#define SIRFUART_TXFIFO_EMPTY BIT(7) -#define SIRFUART_RXFIFO_THD_REACH BIT(8) -#define SIRFUART_TXFIFO_THD_REACH BIT(9) -#define SIRFUART_FRM_ERR BIT(10) -#define SIRFUART_RXD_BREAK BIT(11) -#define SIRFUART_RX_TIMEOUT BIT(12) -#define SIRFUART_PARITY_ERR BIT(13) -#define SIRFUART_CTS_CHANGE BIT(14) -#define SIRFUART_RTS_CHANGE BIT(15) -#define SIRFUART_PLUG_IN BIT(16) - -#define SIRFUART_ERR_INT_STAT \ - (SIRFUART_RX_OFLOW | \ - SIRFUART_FRM_ERR | \ - SIRFUART_RXD_BREAK | \ - SIRFUART_PARITY_ERR) -#define SIRFUART_ERR_INT_EN \ - (SIRFUART_RX_OFLOW_INT | \ - SIRFUART_FRM_ERR_INT | \ - SIRFUART_RXD_BREAK_INT | \ - SIRFUART_PARITY_ERR_INT) -#define SIRFUART_TX_INT_EN SIRFUART_TXFIFO_EMPTY_INT -#define SIRFUART_RX_IO_INT_EN \ - (SIRFUART_RX_TIMEOUT_INT | \ - SIRFUART_RXFIFO_THD_INT | \ - SIRFUART_RXFIFO_FULL_INT | \ - SIRFUART_ERR_INT_EN) - +#define SIRFUART_AFC_CTS_CTRL BIT(10) +#define SIRFUART_AFC_RTS_CTRL BIT(11) +#define SIRFUART_AFC_CTS_STATUS BIT(12) +#define SIRFUART_AFC_RTS_STATUS BIT(13) /* UART FIFO Register */ -#define SIRFUART_TX_FIFO_STOP 0x0 -#define SIRFUART_TX_FIFO_RESET 0x1 -#define SIRFUART_TX_FIFO_START 0x2 -#define SIRFUART_RX_FIFO_STOP 0x0 -#define SIRFUART_RX_FIFO_RESET 0x1 -#define SIRFUART_RX_FIFO_START 0x2 -#define SIRFUART_TX_MODE_DMA 0 -#define SIRFUART_TX_MODE_IO 1 -#define SIRFUART_RX_MODE_DMA 0 -#define SIRFUART_RX_MODE_IO 1 - -#define SIRFUART_RX_EN 0x1 -#define SIRFUART_TX_EN 0x2 +#define SIRFUART_FIFO_STOP 0x0 +#define SIRFUART_FIFO_RESET BIT(0) +#define SIRFUART_FIFO_START BIT(1) + +#define SIRFUART_RX_EN BIT(0) +#define SIRFUART_TX_EN BIT(1) + +#define SIRFUART_IO_MODE BIT(0) +#define SIRFUART_DMA_MODE 0x0 + +/* Macro Specific*/ +#define SIRFUART_INT_EN_CLR 0x0060 +/* Baud Rate Calculation */ +#define SIRF_MIN_SAMPLE_DIV 0xf +#define SIRF_MAX_SAMPLE_DIV 0x3f +#define SIRF_IOCLK_DIV_MAX 0xffff +#define SIRF_SAMPLE_DIV_SHIFT 16 +#define SIRF_IOCLK_DIV_MASK 0xffff +#define SIRF_SAMPLE_DIV_MASK 0x3f0000 +#define SIRF_BAUD_RATE_SUPPORT_NR 18 + +/* USP SPEC */ +#define SIRFSOC_USP_ENDIAN_CTRL_LSBF BIT(4) +#define SIRFSOC_USP_EN BIT(5) + +/* USP-UART Common */ +#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) +#define SIRFUART_RECV_TIMEOUT_VALUE(x) \ + (((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF)) +#define SIRFUART_RECV_TIMEOUT(port, x) \ + (((port)->line > 2) ? (x & 0xFFFF) : ((x) & 0xFFFF) << 16) +#define SIRFUART_FIFO_THD(port) ((port->line) == 1 ? 16 : 64) +#define SIRFUART_ERR_INT_STAT(port, unit_st) \ + (uint_st->sirfsoc_rx_oflow | \ + uint_st->sirfsoc_frm_err | \ + uint_st->sirfsoc_rxd_brk | \ + ((port->line > 2) ? 0 : uint_st->sirfsoc_parity_err)) +#define SIRFUART_RX_IO_INT_EN(port, uint_en) \ + (uint_en->sirfsoc_rx_timeout_en |\ + uint_en->sirfsoc_rxfifo_thd_en |\ + uint_en->sirfsoc_rxfifo_full_en |\ + uint_en->sirfsoc_frm_err_en |\ + uint_en->sirfsoc_rx_oflow_en |\ + uint_en->sirfsoc_rxd_brk_en |\ + ((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en)) +#define SIRFUART_RX_IO_INT_ST(uint_st) \ + (uint_st->sirfsoc_rx_timeout |\ + uint_st->sirfsoc_rxfifo_thd |\ + uint_st->sirfsoc_rxfifo_full) +#define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts) /* Generic Definitions */ #define SIRFSOC_UART_NAME "ttySiRF" #define SIRFSOC_UART_MAJOR 0 @@ -167,6 +371,7 @@ struct sirfsoc_uart_port { struct clk *clk; /* for SiRFmarco, there are SET/CLR for UART_INT_EN */ bool is_marco; + struct sirfsoc_uart_register *uart_reg; }; /* Hardware Flow Control */ -- cgit v0.10.2 From ada1f443d11464468a06646939bb1aed60f5f2dd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:41:43 +0900 Subject: serial: sirf: Staticize local symbols These local symbols are used only in this file. Fix the following sparse warnings: drivers/tty/serial/sirfsoc_uart.c:147:6: warning: symbol 'sirfsoc_uart_start_tx' was not declared. Should it be static? drivers/tty/serial/sirfsoc_uart.c:636:5: warning: symbol 'sirfsoc_uart_probe' was not declared. Should it be static? Signed-off-by: Jingoo Han Acked-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index f8a4d34..d28f38b 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -157,7 +157,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port) } -void sirfsoc_uart_start_tx(struct uart_port *port) +static void sirfsoc_uart_start_tx(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; @@ -829,7 +829,7 @@ static struct of_device_id sirfsoc_uart_ids[] = { }; MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids); -int sirfsoc_uart_probe(struct platform_device *pdev) +static int sirfsoc_uart_probe(struct platform_device *pdev) { struct sirfsoc_uart_port *sirfport; struct uart_port *port; -- cgit v0.10.2 From 9fdedf5d16d04238833d1d45a8e303fdb86bee3a Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:29:48 +0900 Subject: serial: samsung: fix casting warning port->membase is (unsigned char __iomem *), not (unsigned long *) __set_bit() uses (unsigned long *) as the second argument. Thus, casting (unsigned long *)(unsigned long) is necessary to fix the following sparse warnings. drivers/tty/serial/samsung.c:142:33: warning: cast removes address space of expression drivers/tty/serial/samsung.c:161:33: warning: cast removes address space of expression drivers/tty/serial/samsung.c:176:33: warning: cast removes address space of expression drivers/tty/serial/samsung.c:526:40: warning: cast removes address space of expression Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index 00a499e..aaa617a 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -68,7 +68,8 @@ struct s3c24xx_uart_port { /* register access controls */ #define portaddr(port, reg) ((port)->membase + (reg)) -#define portaddrl(port, reg) ((unsigned long *)((port)->membase + (reg))) +#define portaddrl(port, reg) \ + ((unsigned long *)(unsigned long)((port)->membase + (reg))) #define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) #define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) -- cgit v0.10.2 From 75474b6fd6660486d89226fc6f704853c76210e3 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:32:04 +0900 Subject: serial: 8250_early: fix comparison of different types Fix the following sparse warning: drivers/tty/serial/8250/8250_early.c:196:26: error: incompatible types in comparison expression (different type sizes) Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 946ddd2..c100d63 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -194,7 +194,7 @@ static int __init parse_options(struct early_serial8250_device *device, options++; device->baud = simple_strtoul(options, NULL, 0); length = min(strcspn(options, " ") + 1, - sizeof(device->options)); + (size_t)(sizeof(device->options))); strlcpy(device->options, options, length); } else { device->baud = probe_baud(port); -- cgit v0.10.2 From 6602769ba92d9ed310af01772800ca4d0b1fff77 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:32:52 +0900 Subject: serial: mrst_max3110: fix casting warning max->port.membase is (unsigned char __iomem *); thus, casting (unsigned char __iomem *) is necessary to fix the following warning. Also, serial_m3110_ops() is staticized. drivers/tty/serial/mrst_max3110.c:716:17: warning: symbol 'serial_m3110_ops' was not declared. Should it be static? drivers/tty/serial/mrst_max3110.c:847:27: warning: incorrect type in assignment (different address spaces) drivers/tty/serial/mrst_max3110.c:847:27: expected unsigned char [noderef] *membase drivers/tty/serial/mrst_max3110.c:847:27: got void * Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 9b6ef20..a67e708 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -713,7 +713,7 @@ static void serial_m3110_enable_ms(struct uart_port *port) { } -struct uart_ops serial_m3110_ops = { +static struct uart_ops serial_m3110_ops = { .tx_empty = serial_m3110_tx_empty, .set_mctrl = serial_m3110_set_mctrl, .get_mctrl = serial_m3110_get_mctrl, @@ -844,7 +844,7 @@ static int serial_m3110_probe(struct spi_device *spi) pmax = max; /* Give membase a psudo value to pass serial_core's check */ - max->port.membase = (void *)0xff110000; + max->port.membase = (unsigned char __iomem *)0xff110000; uart_add_one_port(&serial_m3110_reg, &max->port); return 0; -- cgit v0.10.2 From edd173da2c9ce10ada0939e74ca579f9bef92337 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:33:27 +0900 Subject: serial: timbuart: Staticize local symbols These local symbols are used only in this file. Fix the following sparse warnings: drivers/tty/serial/timbuart.c:165:6: warning: symbol 'timbuart_handle_rx_port' was not declared. Should it be static? drivers/tty/serial/timbuart.c:187:6: warning: symbol 'timbuart_tasklet' was not declared. Should it be static? Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 6818410..f87097a 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -162,7 +162,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) dev_dbg(port->dev, "%s - leaving\n", __func__); } -void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) +static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) { if (isr & RXFLAGS) { /* Some RX status is set */ @@ -184,7 +184,7 @@ void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) dev_dbg(port->dev, "%s - leaving\n", __func__); } -void timbuart_tasklet(unsigned long arg) +static void timbuart_tasklet(unsigned long arg) { struct timbuart_port *uart = (struct timbuart_port *)arg; u32 isr, ier = 0; -- cgit v0.10.2 From 5a7daed81cd5ff6d4098b7f6342ba35988fcbb86 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:34:03 +0900 Subject: serial: icom: fix casting warning icom_port->uart_port.membase is (unsigned char __iomem *); thus, casting (unsigned char __iomem *) is necessary to fix the following warning. Also, local symbols are staticized. drivers/tty/serial/icom.c:108:26: warning: symbol 'start_proc' was not declared. Should it be static? drivers/tty/serial/icom.c:116:26: warning: symbol 'stop_proc' was not declared. Should it be static? drivers/tty/serial/icom.c:123:25: warning: symbol 'int_mask_tbl' was not declared. Should it be static? drivers/tty/serial/icom.c:1569:54: warning: incorrect type in assignment (different address spaces) drivers/tty/serial/icom.c:1569:54: expected unsigned char [noderef] *membase drivers/tty/serial/icom.c:1569:54: got char * drivers/tty/serial/icom.c:1090:9: warning: cast truncates bits from constant value (ffffff7f becomes 7f) Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 18ed5ae..06555dd 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -105,7 +105,7 @@ static const struct pci_device_id icom_pci_table[] = { {} }; -struct lookup_proc_table start_proc[4] = { +static struct lookup_proc_table start_proc[4] = { {NULL, ICOM_CONTROL_START_A}, {NULL, ICOM_CONTROL_START_B}, {NULL, ICOM_CONTROL_START_C}, @@ -113,14 +113,14 @@ struct lookup_proc_table start_proc[4] = { }; -struct lookup_proc_table stop_proc[4] = { +static struct lookup_proc_table stop_proc[4] = { {NULL, ICOM_CONTROL_STOP_A}, {NULL, ICOM_CONTROL_STOP_B}, {NULL, ICOM_CONTROL_STOP_C}, {NULL, ICOM_CONTROL_STOP_D} }; -struct lookup_int_table int_mask_tbl[4] = { +static struct lookup_int_table int_mask_tbl[4] = { {NULL, ICOM_INT_MASK_PRC_A}, {NULL, ICOM_INT_MASK_PRC_B}, {NULL, ICOM_INT_MASK_PRC_C}, @@ -1087,8 +1087,7 @@ static void icom_close(struct uart_port *port) /* stop receiver */ cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE, - &ICOM_PORT->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); shutdown(ICOM_PORT); @@ -1567,7 +1566,7 @@ static int icom_probe(struct pci_dev *dev, icom_port->uart_port.type = PORT_ICOM; icom_port->uart_port.iotype = UPIO_MEM; icom_port->uart_port.membase = - (char *) icom_adapter->base_addr_pci; + (unsigned char __iomem *)icom_adapter->base_addr_pci; icom_port->uart_port.fifosize = 16; icom_port->uart_port.ops = &icom_ops; icom_port->uart_port.line = -- cgit v0.10.2 From 1053f4da626374ae5f4695a62e2814584c2bc2e2 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:36:27 +0900 Subject: serial: ioc4_serial: Staticize ioc4_serial_attach_one() ioc4_serial_attach_one() is used only in this file. Also, ioc4_serial is not used; it can be removed. Fix the following sparse warnings: drivers/tty/serial/ioc4_serial.c:300:3: warning: symbol 'ioc4_serial' was not declared. Should it be static? drivers/tty/serial/ioc4_serial.c:2771:1: warning: symbol 'ioc4_serial_attach_one' was not declared. Should it be static? Signed-off-by: Jingoo Han Acked-by: Patrick Gefre Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c index e2520ab..1274499 100644 --- a/drivers/tty/serial/ioc4_serial.c +++ b/drivers/tty/serial/ioc4_serial.c @@ -297,7 +297,7 @@ struct ioc4_serial { struct ioc4_uartregs uart_1; struct ioc4_uartregs uart_2; struct ioc4_uartregs uart_3; -} ioc4_serial; +}; /* UART clock speed */ #define IOC4_SER_XIN_CLK_66 66666667 @@ -2767,7 +2767,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) * called per card found from IOC4 master module. * @idd: Master module data for this IOC4 */ -int +static int ioc4_serial_attach_one(struct ioc4_driver_data *idd) { unsigned long tmp_addr1; -- cgit v0.10.2 From 4f749f248266209f066a875937bf51d1d5f4aed5 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:38:20 +0900 Subject: serial: msm_serial: fix comparison of different types Fix the following sparse warning: drivers/tty/serial/msm_serial.c:237:37: error: incompatible types in comparison expression (different type sizes) Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 252d514..8f58540 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -234,7 +234,8 @@ static void handle_tx(struct uart_port *port) break; if (msm_port->is_uartdm) - num_chars = min(tx_count - tf_pointer, sizeof(buf)); + num_chars = min(tx_count - tf_pointer, + (unsigned int)sizeof(buf)); else num_chars = 1; -- cgit v0.10.2 From fbf3ab279127bba325ac93dc1315d221cfd04115 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Aug 2013 17:40:55 +0900 Subject: serial: tegra: use NULL instead of 0 'cons' is a pointer; thus NULL should be used instead of 0. Also, local symbols are staticized. Fix the following sparse warnings: drivers/tty/serial/serial-tegra.c:1209:27: warning: Using plain integer as NULL pointer drivers/tty/serial/serial-tegra.c:1240:29: warning: symbol 'tegra20_uart_chip_data' was not declared. Should it be static? drivers/tty/serial/serial-tegra.c:1246:29: warning: symbol 'tegra30_uart_chip_data' was not declared. Should it be static? Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index ee7c812..94a2484 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1206,7 +1206,7 @@ static struct uart_driver tegra_uart_driver = { .owner = THIS_MODULE, .driver_name = "tegra_hsuart", .dev_name = "ttyTHS", - .cons = 0, + .cons = NULL, .nr = TEGRA_UART_MAXIMUM, }; @@ -1237,13 +1237,13 @@ static int tegra_uart_parse_dt(struct platform_device *pdev, return 0; } -struct tegra_uart_chip_data tegra20_uart_chip_data = { +static struct tegra_uart_chip_data tegra20_uart_chip_data = { .tx_fifo_full_status = false, .allow_txfifo_reset_fifo_mode = true, .support_clk_src_div = false, }; -struct tegra_uart_chip_data tegra30_uart_chip_data = { +static struct tegra_uart_chip_data tegra30_uart_chip_data = { .tx_fifo_full_status = true, .allow_txfifo_reset_fifo_mode = false, .support_clk_src_div = true, -- cgit v0.10.2 From 20246fdfe2cc8d8f94ab69b8e816e6762a4c56c7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 8 Aug 2013 17:10:50 +0530 Subject: serial: bfin_sport_uart: Fix incorrect placement of __initdata __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat Acked-by: Sonic Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index 424ed36..016c3e9 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -884,7 +884,7 @@ static struct platform_driver sport_uart_driver = { }; #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE -static __initdata struct early_platform_driver early_sport_uart_driver = { +static struct early_platform_driver early_sport_uart_driver __initdata = { .class_str = CLASS_BFIN_SPORT_CONSOLE, .pdrv = &sport_uart_driver, .requested_id = EARLY_PLATFORM_ID_UNSET, -- cgit v0.10.2 From 6734a834fbb634d64b6a7a6a590ae0ccebe89c6a Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 8 Aug 2013 17:10:51 +0530 Subject: serial: bfin_uart: Fix incorrect placement of __initdata __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index 378f3c3..3c75e8e 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -1176,7 +1176,7 @@ bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int c * don't let the common infrastructure play with things. (see calls to setup * & earlysetup in ./kernel/printk.c:register_console() */ -static struct __initdata console bfin_early_serial_console = { +static struct console bfin_early_serial_console __initdata = { .name = "early_BFuart", .write = bfin_earlyprintk_console_write, .device = uart_console_device, @@ -1398,7 +1398,7 @@ static struct platform_driver bfin_serial_driver = { }; #if defined(CONFIG_SERIAL_BFIN_CONSOLE) -static __initdata struct early_platform_driver early_bfin_serial_driver = { +static struct early_platform_driver early_bfin_serial_driver __initdata = { .class_str = CLASS_BFIN_CONSOLE, .pdrv = &bfin_serial_driver, .requested_id = EARLY_PLATFORM_ID_UNSET, @@ -1477,7 +1477,7 @@ static struct platform_driver bfin_earlyprintk_driver = { }, }; -static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { +static struct early_platform_driver early_bfin_earlyprintk_driver __initdata = { .class_str = CLASS_BFIN_EARLYPRINTK, .pdrv = &bfin_earlyprintk_driver, .requested_id = EARLY_PLATFORM_ID_UNSET, -- cgit v0.10.2 From 7c658e6b46be5d90e6bb668659bb4de6ce80c536 Mon Sep 17 00:00:00 2001 From: Thomas Langer Date: Fri, 9 Aug 2013 20:54:30 +0200 Subject: serial: MIPS: lantiq: add clk_enable() call to driver Enable the clock if one is present when setting up the console. Signed-off-by: Thomas Langer Acked-by: John Crispin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 15733da..93ac046 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -636,6 +636,9 @@ lqasc_console_setup(struct console *co, char *options) port = <q_port->port; + if (!IS_ERR(ltq_port->clk)) + clk_enable(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); if (options) -- cgit v0.10.2 From 8ad2ee955b810e2a8061d2d3d2e4e4072250b5ec Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 9 Aug 2013 20:54:31 +0200 Subject: serial: MIPS: lantiq: fix clock error check The clock should be checked with the proper IS_ERR() api before using it. Signed-off-by: John Crispin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 93ac046..88d01e0 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -318,7 +318,7 @@ lqasc_startup(struct uart_port *port) struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); int retval; - if (ltq_port->clk) + if (!IS_ERR(ltq_port->clk)) clk_enable(ltq_port->clk); port->uartclk = clk_get_rate(ltq_port->fpiclk); @@ -386,7 +386,7 @@ lqasc_shutdown(struct uart_port *port) port->membase + LTQ_ASC_RXFCON); ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); - if (ltq_port->clk) + if (!IS_ERR(ltq_port->clk)) clk_disable(ltq_port->clk); } -- cgit v0.10.2 From b83286bfa8f40cd7545d772e2fb2a94fe8bb5830 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 9 Aug 2013 17:58:51 -0300 Subject: serial: amba-pl011: Use __releases/__acquires annotations Fix the following sparse warnings: drivers/tty/serial/amba-pl011.c:687:20: warning: context imbalance in 'pl011_dma_flush_buffer' - unexpected unlock drivers/tty/serial/amba-pl011.c:1200:13: warning: context imbalance in 'pl011_rx_chars' - unexpected unlock Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index eb38fb8..aaa2286 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -677,6 +677,8 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) * Locking: called with port lock held and IRQs disabled. */ static void pl011_dma_flush_buffer(struct uart_port *port) +__releases(&uap->port.lock) +__acquires(&uap->port.lock) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -1198,6 +1200,8 @@ static void pl011_enable_ms(struct uart_port *port) } static void pl011_rx_chars(struct uart_amba_port *uap) +__releases(&uap->port.lock) +__acquires(&uap->port.lock) { pl011_fifo_to_tty(uap); -- cgit v0.10.2 From 071eb0ff68f5898af724752b3527edcddf222e23 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 14 Aug 2013 11:11:22 +0200 Subject: tty: ar933x_uart: simplify use of devm_ioremap_resource Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 3f5517f..a712a3f 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -640,12 +640,6 @@ static int ar933x_uart_probe(struct platform_device *pdev) if (id > CONFIG_SERIAL_AR933X_NR_UARTS) return -EINVAL; - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - dev_err(&pdev->dev, "no MEM resource\n"); - return -EINVAL; - } - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { dev_err(&pdev->dev, "no IRQ resource\n"); @@ -659,6 +653,7 @@ static int ar933x_uart_probe(struct platform_device *pdev) port = &up->port; + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); port->membase = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(port->membase)) return PTR_ERR(port->membase); -- cgit v0.10.2 From 4a0ac0f55b18dc297a87a85417fcf068658bf103 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Wed, 14 Aug 2013 11:29:38 +0100 Subject: OMAP: add RS485 support This patch adds RS485 support to the OMAP serial driver, as defined in:- Documentation/devicetree/bindings/serial/rs485.txt When a UART transmitter is connected to (eg) a RS485 driver, it is necessary to turn the driver on/off as quickly as possible. This is best achieved in the serial driver itself (rather than in userspace where the latency can be quite large). This patch allows a GPIO pin to be defined (via DT) that controls the enabling of the driver at the start of a message, and disables the driver when the message has been completed. When RS485 is disabled, the RTS pin is set to on. Signed-off-by: Mark Jackson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index c751706..2706c11 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -40,8 +40,11 @@ #include #include #include +#include #include +#include + #define OMAP_MAX_HSUART_PORTS 6 #define UART_BUILD_REVISION(x, y) (((x) << 8) | (y)) @@ -162,6 +165,9 @@ struct uart_omap_port { int DTR_inverted; int DTR_active; + struct serial_rs485 rs485; + int rts_gpio; + struct pm_qos_request pm_qos_request; u32 latency; u32 calc_latency; @@ -277,13 +283,42 @@ static void serial_omap_enable_ms(struct uart_port *port) static void serial_omap_stop_tx(struct uart_port *port) { struct uart_omap_port *up = to_uart_omap_port(port); + struct circ_buf *xmit = &up->port.state->xmit; + int res; pm_runtime_get_sync(up->dev); + + /* handle rs485 */ + if (up->rs485.flags & SER_RS485_ENABLED) { + /* do nothing if current tx not yet completed */ + res = serial_in(up, UART_LSR) & UART_LSR_TEMT; + if (!res) + return; + + /* if there's no more data to send, turn off rts */ + if (uart_circ_empty(xmit)) { + /* if rts not already disabled */ + res = (up->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0; + if (gpio_get_value(up->rts_gpio) != res) { + if (up->rs485.delay_rts_after_send > 0) { + mdelay(up->rs485.delay_rts_after_send); + } + gpio_set_value(up->rts_gpio, res); + } + } + } + if (up->ier & UART_IER_THRI) { up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); } + if ((up->rs485.flags & SER_RS485_ENABLED) && + !(up->rs485.flags & SER_RS485_RX_DURING_TX)) { + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + } + pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -346,8 +381,26 @@ static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) static void serial_omap_start_tx(struct uart_port *port) { struct uart_omap_port *up = to_uart_omap_port(port); + int res; pm_runtime_get_sync(up->dev); + + /* handle rs485 */ + if (up->rs485.flags & SER_RS485_ENABLED) { + /* if rts not already enabled */ + res = (up->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0; + if (gpio_get_value(up->rts_gpio) != res) { + gpio_set_value(up->rts_gpio, res); + if (up->rs485.delay_rts_before_send > 0) { + mdelay(up->rs485.delay_rts_before_send); + } + } + } + + if ((up->rs485.flags & SER_RS485_ENABLED) && + !(up->rs485.flags & SER_RS485_RX_DURING_TX)) + serial_omap_stop_rx(port); + serial_omap_enable_ier_thri(up); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); @@ -1262,6 +1315,79 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up) #endif +/* Enable or disable the rs485 support */ +static void +serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned long flags; + unsigned int mode; + int val; + + pm_runtime_get_sync(up->dev); + spin_lock_irqsave(&up->port.lock, flags); + + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + serial_out(up, UART_IER, up->ier); + + /* Disable interrupts from this port */ + mode = up->ier; + up->ier = 0; + serial_out(up, UART_IER, 0); + + /* store new config */ + up->rs485 = *rs485conf; + + /* + * Just as a precaution, only allow rs485 + * to be enabled if the gpio pin is valid + */ + if (gpio_is_valid(up->rts_gpio)) { + /* enable / disable rts */ + val = (up->rs485.flags & SER_RS485_ENABLED) ? + SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; + val = (up->rs485.flags & val) ? 1 : 0; + gpio_set_value(up->rts_gpio, val); + } else + up->rs485.flags &= ~SER_RS485_ENABLED; + + /* Enable interrupts */ + up->ier = mode; + serial_out(up, UART_IER, up->ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static int +serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) +{ + struct serial_rs485 rs485conf; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, + sizeof(rs485conf))) + return -EFAULT; + + serial_omap_config_rs485(port, &rs485conf); + break; + + case TIOCGRS485: + if (copy_to_user((struct serial_rs485 *) arg, + &(to_uart_omap_port(port)->rs485), + sizeof(rs485conf))) + return -EFAULT; + break; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + + static struct uart_ops serial_omap_pops = { .tx_empty = serial_omap_tx_empty, .set_mctrl = serial_omap_set_mctrl, @@ -1283,6 +1409,7 @@ static struct uart_ops serial_omap_pops = { .request_port = serial_omap_request_port, .config_port = serial_omap_config_port, .verify_port = serial_omap_verify_port, + .ioctl = serial_omap_ioctl, #ifdef CONFIG_CONSOLE_POLL .poll_put_char = serial_omap_poll_put_char, .poll_get_char = serial_omap_poll_get_char, @@ -1405,6 +1532,53 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) return omap_up_info; } +static int serial_omap_probe_rs485(struct uart_omap_port *up, + struct device_node *np) +{ + struct serial_rs485 *rs485conf = &up->rs485; + u32 rs485_delay[2]; + enum of_gpio_flags flags; + int ret; + + rs485conf->flags = 0; + up->rts_gpio = -EINVAL; + + if (!np) + return 0; + + if (of_property_read_bool(np, "rs485-rts-active-high")) + rs485conf->flags |= SER_RS485_RTS_ON_SEND; + else + rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + + /* check for tx enable gpio */ + up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags); + if (gpio_is_valid(up->rts_gpio)) { + ret = gpio_request(up->rts_gpio, "omap-serial"); + if (ret < 0) + return ret; + ret = gpio_direction_output(up->rts_gpio, + flags & SER_RS485_RTS_AFTER_SEND); + if (ret < 0) + return ret; + } else + up->rts_gpio = -EINVAL; + + if (of_property_read_u32_array(np, "rs485-rts-delay", + rs485_delay, 2) == 0) { + rs485conf->delay_rts_before_send = rs485_delay[0]; + rs485conf->delay_rts_after_send = rs485_delay[1]; + } + + if (of_property_read_bool(np, "rs485-rx-during-tx")) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time")) + rs485conf->flags |= SER_RS485_ENABLED; + + return 0; +} + static int serial_omap_probe(struct platform_device *pdev) { struct uart_omap_port *up; @@ -1480,6 +1654,10 @@ static int serial_omap_probe(struct platform_device *pdev) goto err_port_line; } + ret = serial_omap_probe_rs485(up, pdev->dev.of_node); + if (ret < 0) + goto err_rs485; + sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = devm_ioremap(&pdev->dev, mem->start, @@ -1535,6 +1713,7 @@ err_add_port: pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); err_ioremap: +err_rs485: err_port_line: dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", pdev->id, __func__, ret); -- cgit v0.10.2 From a343756e07884e4cecd3a4297de7f121e5bb8829 Mon Sep 17 00:00:00 2001 From: Barry Song <21cnbao@gmail.com> Date: Thu, 15 Aug 2013 06:52:14 +0800 Subject: serial: sirf: drop redundant pinctrl_get_select_default as pinctrl core does it pinctrl core will get default pinmux, so drop it in the sirfsoc serial driver. Cc: Linus Walleij Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index d28f38b..d87003d 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -22,7 +22,6 @@ #include #include #include -#include #include "sirfsoc_uart.h" @@ -893,17 +892,10 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) } port->irq = res->start; - if (sirfport->hw_flow_ctrl) { - sirfport->p = pinctrl_get_select_default(&pdev->dev); - ret = IS_ERR(sirfport->p); - if (ret) - goto err; - } - sirfport->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(sirfport->clk)) { ret = PTR_ERR(sirfport->clk); - goto clk_err; + goto err; } clk_prepare_enable(sirfport->clk); port->uartclk = clk_get_rate(sirfport->clk); @@ -923,9 +915,6 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) port_err: clk_disable_unprepare(sirfport->clk); clk_put(sirfport->clk); -clk_err: - if (sirfport->hw_flow_ctrl) - pinctrl_put(sirfport->p); err: return ret; } @@ -934,9 +923,6 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) { struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); struct uart_port *port = &sirfport->port; - - if (sirfport->hw_flow_ctrl) - pinctrl_put(sirfport->p); clk_disable_unprepare(sirfport->clk); clk_put(sirfport->clk); uart_remove_one_port(&sirfsoc_uart_drv, port); diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 6f6d275..2b41b06 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -367,7 +367,6 @@ struct sirfsoc_uart_port { unsigned char ms_enabled; struct uart_port port; - struct pinctrl *p; struct clk *clk; /* for SiRFmarco, there are SET/CLR for UART_INT_EN */ bool is_marco; -- cgit v0.10.2 From 2eb5618de87927e540055edc625b22f2d5662ab5 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Thu, 15 Aug 2013 06:52:15 +0800 Subject: serial: sirf: fix the hardware-flow-ctrl for USP-based UART for USP-based UART, we use two gpios as RTS and CST pins. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index d87003d..ed3b890 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -110,14 +111,19 @@ static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - if (!(sirfport->ms_enabled)) { + if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled) goto cts_asserted; - } else if (sirfport->hw_flow_ctrl) { + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { if (!(rd_regl(port, ureg->sirfsoc_afc_ctrl) & SIRFUART_AFC_CTS_STATUS)) goto cts_asserted; else goto cts_deasserted; + } else { + if (!gpio_get_value(sirfport->cts_gpio)) + goto cts_asserted; + else + goto cts_deasserted; } cts_deasserted: return TIOCM_CAR | TIOCM_DSR; @@ -132,10 +138,18 @@ static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) unsigned int assert = mctrl & TIOCM_RTS; unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0; unsigned int current_val; - if (sirfport->hw_flow_ctrl) { + + if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled) + return; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { current_val = rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0xFF; val |= current_val; wr_regl(port, ureg->sirfsoc_afc_ctrl, val); + } else { + if (!val) + gpio_set_value(sirfport->rts_gpio, 1); + else + gpio_set_value(sirfport->rts_gpio, 0); } } @@ -195,21 +209,32 @@ static void sirfsoc_uart_disable_ms(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long reg; - sirfport->ms_enabled = 0; if (!sirfport->hw_flow_ctrl) return; - - reg = rd_regl(port, ureg->sirfsoc_afc_ctrl); - wr_regl(port, ureg->sirfsoc_afc_ctrl, reg & ~0x3FF); - if (!sirfport->is_marco) { - reg = rd_regl(port, ureg->sirfsoc_int_en_reg); - wr_regl(port, ureg->sirfsoc_int_en_reg, - reg & ~uint_en->sirfsoc_cts_en); + sirfport->ms_enabled = false; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + wr_regl(port, ureg->sirfsoc_afc_ctrl, + rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF); + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)& + ~uint_en->sirfsoc_cts_en); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_cts_en); } else - wr_regl(port, SIRFUART_INT_EN_CLR, - uint_en->sirfsoc_cts_en); + disable_irq(gpio_to_irq(sirfport->cts_gpio)); +} + +static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id) +{ + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; + struct uart_port *port = &sirfport->port; + if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled) + uart_handle_cts_change(port, + !gpio_get_value(sirfport->cts_gpio)); + return IRQ_HANDLED; } static void sirfsoc_uart_enable_ms(struct uart_port *port) @@ -217,25 +242,23 @@ static void sirfsoc_uart_enable_ms(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long reg; - unsigned long flg; if (!sirfport->hw_flow_ctrl) return; - flg = SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN; - reg = rd_regl(port, ureg->sirfsoc_afc_ctrl); - wr_regl(port, ureg->sirfsoc_afc_ctrl, reg | flg); - if (!sirfport->is_marco) { - reg = rd_regl(port, ureg->sirfsoc_int_en_reg); - wr_regl(port, ureg->sirfsoc_int_en_reg, - reg | uint_en->sirfsoc_cts_en); + sirfport->ms_enabled = true; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + wr_regl(port, ureg->sirfsoc_afc_ctrl, + rd_regl(port, ureg->sirfsoc_afc_ctrl) | + SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN); + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + | uint_en->sirfsoc_cts_en); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_cts_en); } else - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_cts_en); - uart_handle_cts_change(port, - !(rd_regl(port, ureg->sirfsoc_afc_ctrl) & - SIRFUART_AFC_CTS_STATUS)); - sirfport->ms_enabled = 1; + enable_irq(gpio_to_irq(sirfport->cts_gpio)); } static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state) @@ -505,8 +528,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, if (termios->c_iflag & INPCK) port->read_status_mask |= uint_en->sirfsoc_frm_err_en | uint_en->sirfsoc_parity_err_en; - } - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + } else { if (termios->c_iflag & INPCK) port->read_status_mask |= uint_en->sirfsoc_frm_err_en; } @@ -529,8 +551,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, config_reg |= SIRFUART_STICK_BIT_EVEN; } } - } - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + } else { if (termios->c_iflag & IGNPAR) port->ignore_status_mask |= uint_en->sirfsoc_frm_err_en; @@ -567,8 +588,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, clk_div_reg = sirfsoc_uart_calc_sample_div(baud_rate, ioclk_rate, &set_baud); wr_regl(port, ureg->sirfsoc_divisor, clk_div_reg); - } - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + } else { clk_div_reg = sirfsoc_usp_calc_sample_div(baud_rate, ioclk_rate, &sample_div_reg); sample_div_reg--; @@ -593,8 +613,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { config_reg |= SIRFUART_RECV_TIMEOUT(port, rx_time_out); wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); - } - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) { + } else { /*tx frame ctrl*/ len_val = (data_bit_len - 1) << 0; len_val |= (data_bit_len + 1 + stop_bit_len - 1) << 16; @@ -675,7 +694,25 @@ static int sirfsoc_uart_startup(struct uart_port *port) goto irq_err; } startup_uart_controller(port); + + sirfport->ms_enabled = false; + if (sirfport->uart_reg->uart_type == SIRF_USP_UART && + sirfport->hw_flow_ctrl) { + set_irq_flags(gpio_to_irq(sirfport->cts_gpio), + IRQF_VALID | IRQF_NOAUTOEN); + ret = request_irq(gpio_to_irq(sirfport->cts_gpio), + sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport); + if (ret != 0) { + dev_err(port->dev, "UART-USP:request gpio irq fail\n"); + goto init_rx_err; + } + } + enable_irq(port->irq); + +init_rx_err: + free_irq(port->irq, sirfport); irq_err: return ret; } @@ -690,9 +727,12 @@ static void sirfsoc_uart_shutdown(struct uart_port *port) wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL); free_irq(port->irq, sirfport); - if (sirfport->ms_enabled) { + if (sirfport->ms_enabled) sirfsoc_uart_disable_ms(port); - sirfport->ms_enabled = 0; + if (sirfport->uart_reg->uart_type == SIRF_USP_UART && + sirfport->hw_flow_ctrl) { + gpio_set_value(sirfport->rts_gpio, 1); + free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport); } } @@ -852,16 +892,51 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) port->private_data = sirfport; sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data; + sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node, + "sirf,uart-has-rtscts"); if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) sirfport->uart_reg->uart_type = SIRF_REAL_UART; - if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) + if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) { sirfport->uart_reg->uart_type = SIRF_USP_UART; + if (!sirfport->hw_flow_ctrl) + goto usp_no_flow_control; + if (of_find_property(pdev->dev.of_node, "cts-gpios", NULL)) + sirfport->cts_gpio = of_get_named_gpio( + pdev->dev.of_node, "cts-gpios", 0); + else + sirfport->cts_gpio = -1; + if (of_find_property(pdev->dev.of_node, "rts-gpios", NULL)) + sirfport->rts_gpio = of_get_named_gpio( + pdev->dev.of_node, "rts-gpios", 0); + else + sirfport->rts_gpio = -1; + + if ((!gpio_is_valid(sirfport->cts_gpio) || + !gpio_is_valid(sirfport->rts_gpio))) { + ret = -EINVAL; + dev_err(&pdev->dev, + "Usp flow control must have rfs and tfs gpio"); + goto err; + } + ret = devm_gpio_request(&pdev->dev, sirfport->cts_gpio, + "usp-rfs-gpio"); + if (ret) { + dev_err(&pdev->dev, "Unable request rfs gpio"); + goto err; + } + gpio_direction_input(sirfport->cts_gpio); + ret = devm_gpio_request(&pdev->dev, sirfport->rts_gpio, + "usp-tfs-gpio"); + if (ret) { + dev_err(&pdev->dev, "Unable request tfs gpio"); + goto err; + } + gpio_direction_output(sirfport->rts_gpio, 1); + } +usp_no_flow_control: if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-uart")) sirfport->is_marco = true; - if (of_find_property(pdev->dev.of_node, "hw_flow_ctrl", NULL)) - sirfport->hw_flow_ctrl = 1; - if (of_property_read_u32(pdev->dev.of_node, "fifosize", &port->fifosize)) { diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 2b41b06..e87035a 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -363,14 +363,16 @@ struct sirfsoc_baudrate_to_regv { }; struct sirfsoc_uart_port { - unsigned char hw_flow_ctrl; - unsigned char ms_enabled; + bool hw_flow_ctrl; + bool ms_enabled; struct uart_port port; struct clk *clk; /* for SiRFmarco, there are SET/CLR for UART_INT_EN */ bool is_marco; struct sirfsoc_uart_register *uart_reg; + unsigned int cts_gpio; + unsigned int rts_gpio; }; /* Hardware Flow Control */ -- cgit v0.10.2 From 1ef39808ca27837017a433f94aa7055cb8490e80 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Thu, 15 Aug 2013 06:52:16 +0800 Subject: serial: sirf: add DT-binding document to describle detailed properties we defined some special properties for hardware flow control, document them for DT-binding. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/tty/serial/sirf-uart.txt b/Documentation/devicetree/bindings/tty/serial/sirf-uart.txt new file mode 100644 index 0000000..a2dfc65 --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/sirf-uart.txt @@ -0,0 +1,33 @@ +* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter * + +Required properties: +- compatible : Should be "sirf,prima2-uart" or "sirf, prima2-usp-uart" +- reg : Offset and length of the register set for the device +- interrupts : Should contain uart interrupt +- fifosize : Should define hardware rx/tx fifo size +- clocks : Should contain uart clock number + +Optional properties: +- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware +- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true +- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true + +Example: + +uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x1000>; + interrupts = <17>; + fifosize = <128>; + clocks = <&clks 13>; +}; + +On the board-specific dts, we can put rts-gpios and cts-gpios like + +usp@b0090000 { + compatible = "sirf,prima2-usp-uart"; + sirf,uart-has-rtscts; + rts-gpios = <&gpio 15 0>; + cts-gpios = <&gpio 46 0>; +}; -- cgit v0.10.2 From 09a5163f5c0eb0944f3a2c219acd75933f74fda2 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Wed, 14 Aug 2013 23:18:37 +0100 Subject: serial: pch_uart: fix compilation warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Function wait_for_xmitr is invoked only on functions that either depend on CONFIG_CONSOLE_POLL or CONFIG_SERIAL_PCH_UART_CONSOLE. This patch fixes the following warning: drivers/tty/serial/pch_uart.c:1504:13: warning: ‘wait_for_xmitr’ defined but not used [-Wunused-function] Signed-off-by: Luis Henriques Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 5040c51..52379e5 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1524,6 +1524,7 @@ static int pch_uart_verify_port(struct uart_port *port, return 0; } +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE) /* * Wait for transmitter & holding register to empty */ @@ -1554,6 +1555,7 @@ static void wait_for_xmitr(struct eg20t_port *up, int bits) } } } +#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */ #ifdef CONFIG_CONSOLE_POLL /* -- cgit v0.10.2 From e438ac9ade074932383bb00d51b8ded8a0ee164b Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Thu, 15 Aug 2013 08:53:44 +0100 Subject: OMAP: serial: Remove incorrect disabling of IER interrupt The recent patch to add RS485 contained a bug whereby the IER interrupt was cleared down incorrectly. This patch fixes the problem. Signed-off-by: Mark Jackson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 2706c11..2fa7b5c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1327,9 +1327,6 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) pm_runtime_get_sync(up->dev); spin_lock_irqsave(&up->port.lock, flags); - up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); - serial_out(up, UART_IER, up->ier); - /* Disable interrupts from this port */ mode = up->ier; up->ier = 0; -- cgit v0.10.2 From 33acbb82695f84e9429c1f7fbdeb4588dea12ffa Mon Sep 17 00:00:00 2001 From: Tim Kryger Date: Fri, 16 Aug 2013 13:50:15 -0700 Subject: serial: 8250_dw: Report CTS asserted for auto flow When a serial port is configured for RTS/CTS flow control, serial core will disable the transmitter if it observes CTS is de-asserted. This is perfectly reasonable and appropriate when the UART lacks the ability to automatically perform CTS flow control. However, if the UART hardware can manage flow control automatically, it is important that software not get involved. When the DesignWare UART enables 16C750 style auto-RTS/CTS it stops generating interrupts for changes in CTS state so software mostly stays out of the way. However, it does report the true state of CTS in the MSR so software may notice it is de-asserted and respond by improperly disabling the transmitter. Once this happens the transmitter will be blocked forever. To avoid this situation, we simply lie to the 8250 and serial core by reporting that CTS is asserted whenever auto-RTS/CTS mode is enabled. Signed-off-by: Tim Kryger Reviewed-by: Matt Porter Reviewed-by: Markus Mayer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 76a8daa..daf710f 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -57,11 +57,25 @@ struct dw8250_data { int last_lcr; + int last_mcr; int line; struct clk *clk; u8 usr_reg; }; +static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = p->private_data; + + /* If reading MSR, report CTS asserted when auto-CTS/RTS enabled */ + if (offset == UART_MSR && d->last_mcr & UART_MCR_AFE) { + value |= UART_MSR_CTS; + value &= ~UART_MSR_DCTS; + } + + return value; +} + static void dw8250_serial_out(struct uart_port *p, int offset, int value) { struct dw8250_data *d = p->private_data; @@ -69,15 +83,17 @@ static void dw8250_serial_out(struct uart_port *p, int offset, int value) if (offset == UART_LCR) d->last_lcr = value; - offset <<= p->regshift; - writeb(value, p->membase + offset); + if (offset == UART_MCR) + d->last_mcr = value; + + writeb(value, p->membase + (offset << p->regshift)); } static unsigned int dw8250_serial_in(struct uart_port *p, int offset) { - offset <<= p->regshift; + unsigned int value = readb(p->membase + (offset << p->regshift)); - return readb(p->membase + offset); + return dw8250_modify_msr(p, offset, value); } /* Read Back (rb) version to ensure register access ording. */ @@ -94,15 +110,17 @@ static void dw8250_serial_out32(struct uart_port *p, int offset, int value) if (offset == UART_LCR) d->last_lcr = value; - offset <<= p->regshift; - writel(value, p->membase + offset); + if (offset == UART_MCR) + d->last_mcr = value; + + writel(value, p->membase + (offset << p->regshift)); } static unsigned int dw8250_serial_in32(struct uart_port *p, int offset) { - offset <<= p->regshift; + unsigned int value = readl(p->membase + (offset << p->regshift)); - return readl(p->membase + offset); + return dw8250_modify_msr(p, offset, value); } static int dw8250_handle_irq(struct uart_port *p) -- cgit v0.10.2 From 3abeff77c8e2d2ac494021a7ee12892b6136381c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 19 Aug 2013 13:20:36 +0200 Subject: serial: st-asc: replace devm_request_and_ioremap by devm_ioremap_resource Use devm_ioremap_resource instead of devm_request_and_ioremap. This was done using the semantic patch scripts/coccinelle/api/devm_ioremap_resource.cocci and various manual modifications to move associated calls to platform_get_resource closer to the resulting call to devm_ioremap_resource and to remove the associated error handling code. The initialization of port->mapbase is also moved lower, to take advantage of the NULL test on res performed by devm_ioremap_resource. Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 2ff4b1b..4f5caa38 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -665,26 +665,20 @@ static int asc_init_port(struct asc_port *ascport, struct platform_device *pdev) { struct uart_port *port = &ascport->port; - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (!res) { - dev_err(&pdev->dev, "Unable to get io resource\n"); - return -ENODEV; - } + struct resource *res; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; port->ops = &asc_uart_ops; port->fifosize = ASC_FIFO_SIZE; port->dev = &pdev->dev; - port->mapbase = res->start; port->irq = platform_get_irq(pdev, 0); - port->membase = devm_request_and_ioremap(&pdev->dev, res); - if (!port->membase) { - dev_err(&pdev->dev, "Unable to request io memory\n"); - return -ENODEV; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + port->mapbase = res->start; spin_lock_init(&port->lock); -- cgit v0.10.2 From 67bc306cec18b962966208a8b553ac99fa554247 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 19 Aug 2013 11:47:51 +0800 Subject: serial: sirf: fix the typo for rts/cts gpio fix the typo in commit 2eb5618de87927e54 which uses two gpios for rts/cts. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index ed3b890..10718c0 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -915,20 +915,20 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) !gpio_is_valid(sirfport->rts_gpio))) { ret = -EINVAL; dev_err(&pdev->dev, - "Usp flow control must have rfs and tfs gpio"); + "Usp flow control must have cts and rts gpio"); goto err; } ret = devm_gpio_request(&pdev->dev, sirfport->cts_gpio, - "usp-rfs-gpio"); + "usp-cts-gpio"); if (ret) { - dev_err(&pdev->dev, "Unable request rfs gpio"); + dev_err(&pdev->dev, "Unable request cts gpio"); goto err; } gpio_direction_input(sirfport->cts_gpio); ret = devm_gpio_request(&pdev->dev, sirfport->rts_gpio, - "usp-tfs-gpio"); + "usp-rts-gpio"); if (ret) { - dev_err(&pdev->dev, "Unable request tfs gpio"); + dev_err(&pdev->dev, "Unable request rts gpio"); goto err; } gpio_direction_output(sirfport->rts_gpio, 1); -- cgit v0.10.2 From 15cdcb12cbcbd6abf16d6b6a52e04d452b464e3b Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 19 Aug 2013 11:47:52 +0800 Subject: serial: sirf: fix the namespace of startup_uart entry startup_uart_controller() loses namespace, this patch drops the function directly and move the content into sirfsoc_uart_startup(). Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 10718c0..d37609d 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -649,37 +649,10 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, spin_unlock_irqrestore(&port->lock, flags); } -static void startup_uart_controller(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - unsigned long temp_regv; - int temp; - temp_regv = rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl); - wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, temp_regv | - SIRFUART_IO_MODE); - temp_regv = rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl); - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, temp_regv | - SIRFUART_IO_MODE); - wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0); - wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0); - wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN); - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) - wr_regl(port, ureg->sirfsoc_mode1, - SIRFSOC_USP_ENDIAN_CTRL_LSBF | - SIRFSOC_USP_EN); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, 0); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); - temp = SIRFUART_FIFO_THD(port); - wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, temp); - wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, temp); -} - static int sirfsoc_uart_startup(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; unsigned int index = port->line; int ret; set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN); @@ -693,7 +666,27 @@ static int sirfsoc_uart_startup(struct uart_port *port) index, port->irq); goto irq_err; } - startup_uart_controller(port); + + /* initial hardware settings */ + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) | + SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | + SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0); + wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0); + wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN); + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_mode1, + SIRFSOC_USP_ENDIAN_CTRL_LSBF | + SIRFSOC_USP_EN); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port)); + wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port)); sirfport->ms_enabled = false; if (sirfport->uart_reg->uart_type == SIRF_USP_UART && @@ -711,6 +704,7 @@ static int sirfsoc_uart_startup(struct uart_port *port) enable_irq(port->irq); + return 0; init_rx_err: free_irq(port->irq, sirfport); irq_err: -- cgit v0.10.2 From 8316d04c42b94e94c8e54027d7c77ebe098ab5fa Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 19 Aug 2013 11:47:53 +0800 Subject: serial: sirf: add DMA support using dmaengine APIs if we get the valid dma channels from dts, move to use dmaengine to do rx/tx. because the dma hardware requires dma address and length to be 4bytes aligned, in this driver, we will still use PIO for non-aligned bytes, and use dma for aligned bytes. for rx, to keep the dmaengine always active, we use double-buffer, so we issue two dma_desc at first, and maintain the status of both 1. dma transfer done: update in rx dma finish callback 2. dma buffer is inserted into tty: update in rx dma finish tasklet and rx timeout tasklet so we re-issue the dma_desc only if both 1&2 are finished. for tx, as we know the actual length for every transfer, we don't need the above double buffering. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index d37609d..b8d7eb3 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -21,6 +21,10 @@ #include #include #include +#include +#include +#include +#include #include #include @@ -32,6 +36,9 @@ static unsigned int sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count); static struct uart_driver sirfsoc_uart_drv; +static void sirfsoc_uart_tx_dma_complete_callback(void *param); +static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port); +static void sirfsoc_uart_rx_dma_complete_callback(void *param); static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = { {4000000, 2359296}, {3500000, 1310721}, @@ -158,16 +165,115 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned int regv; - if (!sirfport->is_marco) { - regv = rd_regl(port, ureg->sirfsoc_int_en_reg); + if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) { + if (sirfport->tx_dma_state == TX_DMA_RUNNING) { + dmaengine_pause(sirfport->tx_dma_chan); + sirfport->tx_dma_state = TX_DMA_PAUSE; + } else { + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_txfifo_empty_en); + } + } else { + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_txfifo_empty_en); + } +} + +static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport) +{ + struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + struct circ_buf *xmit = &port->state->xmit; + unsigned long tran_size; + unsigned long tran_start; + unsigned long pio_tx_size; + + tran_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + tran_start = (unsigned long)(xmit->buf + xmit->tail); + if (uart_circ_empty(xmit) || uart_tx_stopped(port) || + !tran_size) + return; + if (sirfport->tx_dma_state == TX_DMA_PAUSE) { + dmaengine_resume(sirfport->tx_dma_chan); + return; + } + if (sirfport->tx_dma_state == TX_DMA_RUNNING) + return; + if (!sirfport->is_marco) wr_regl(port, ureg->sirfsoc_int_en_reg, - regv & ~uint_en->sirfsoc_txfifo_empty_en); - } else + rd_regl(port, ureg->sirfsoc_int_en_reg)& + ~(uint_en->sirfsoc_txfifo_empty_en)); + else wr_regl(port, SIRFUART_INT_EN_CLR, uint_en->sirfsoc_txfifo_empty_en); - + /* + * DMA requires buffer address and buffer length are both aligned with + * 4 bytes, so we use PIO for + * 1. if address is not aligned with 4bytes, use PIO for the first 1~3 + * bytes, and move to DMA for the left part aligned with 4bytes + * 2. if buffer length is not aligned with 4bytes, use DMA for aligned + * part first, move to PIO for the left 1~3 bytes + */ + if (tran_size < 4 || BYTES_TO_ALIGN(tran_start)) { + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)| + SIRFUART_IO_MODE); + if (BYTES_TO_ALIGN(tran_start)) { + pio_tx_size = sirfsoc_uart_pio_tx_chars(sirfport, + BYTES_TO_ALIGN(tran_start)); + tran_size -= pio_tx_size; + } + if (tran_size < 4) + sirfsoc_uart_pio_tx_chars(sirfport, tran_size); + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)| + uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_txfifo_empty_en); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); + } else { + /* tx transfer mode switch into dma mode */ + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)& + ~SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); + tran_size &= ~(0x3); + + sirfport->tx_dma_addr = dma_map_single(port->dev, + xmit->buf + xmit->tail, + tran_size, DMA_TO_DEVICE); + sirfport->tx_dma_desc = dmaengine_prep_slave_single( + sirfport->tx_dma_chan, sirfport->tx_dma_addr, + tran_size, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + if (!sirfport->tx_dma_desc) { + dev_err(port->dev, "DMA prep slave single fail\n"); + return; + } + sirfport->tx_dma_desc->callback = + sirfsoc_uart_tx_dma_complete_callback; + sirfport->tx_dma_desc->callback_param = (void *)sirfport; + sirfport->transfer_size = tran_size; + + dmaengine_submit(sirfport->tx_dma_desc); + dma_async_issue_pending(sirfport->tx_dma_chan); + sirfport->tx_dma_state = TX_DMA_RUNNING; + } } static void sirfsoc_uart_start_tx(struct uart_port *port) @@ -175,17 +281,19 @@ static void sirfsoc_uart_start_tx(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long regv; - - sirfsoc_uart_pio_tx_chars(sirfport, 1); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); - if (!sirfport->is_marco) { - regv = rd_regl(port, ureg->sirfsoc_int_en_reg); - wr_regl(port, ureg->sirfsoc_int_en_reg, regv | - uint_en->sirfsoc_txfifo_empty_en); - } else - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_txfifo_empty_en); + if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) + sirfsoc_uart_tx_with_dma(sirfport); + else { + sirfsoc_uart_pio_tx_chars(sirfport, 1); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)| + uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_txfifo_empty_en); + } } static void sirfsoc_uart_stop_rx(struct uart_port *port) @@ -193,15 +301,28 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long reg; + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); - if (!sirfport->is_marco) { - reg = rd_regl(port, ureg->sirfsoc_int_en_reg); - wr_regl(port, ureg->sirfsoc_int_en_reg, - reg & ~(SIRFUART_RX_IO_INT_EN(port, uint_en))); - } else - wr_regl(port, SIRFUART_INT_EN_CLR, - SIRFUART_RX_IO_INT_EN(port, uint_en)); + if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) { + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~(SIRFUART_RX_DMA_INT_EN(port, uint_en) | + uint_en->sirfsoc_rx_done_en)); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + SIRFUART_RX_DMA_INT_EN(port, uint_en)| + uint_en->sirfsoc_rx_done_en); + dmaengine_terminate_all(sirfport->rx_dma_chan); + } else { + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)& + ~(SIRFUART_RX_IO_INT_EN(port, uint_en))); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + SIRFUART_RX_IO_INT_EN(port, uint_en)); + } } static void sirfsoc_uart_disable_ms(struct uart_port *port) @@ -298,6 +419,7 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) break; } + sirfport->rx_io_count += rx_count; port->icount.rx += rx_count; tty_flip_buffer_push(&port->state->port); @@ -327,6 +449,166 @@ sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count) return num_tx; } +static void sirfsoc_uart_tx_dma_complete_callback(void *param) +{ + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; + struct uart_port *port = &sirfport->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + xmit->tail = (xmit->tail + sirfport->transfer_size) & + (UART_XMIT_SIZE - 1); + port->icount.tx += sirfport->transfer_size; + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + if (sirfport->tx_dma_addr) + dma_unmap_single(port->dev, sirfport->tx_dma_addr, + sirfport->transfer_size, DMA_TO_DEVICE); + spin_lock_irqsave(&sirfport->tx_lock, flags); + sirfport->tx_dma_state = TX_DMA_IDLE; + sirfsoc_uart_tx_with_dma(sirfport); + spin_unlock_irqrestore(&sirfport->tx_lock, flags); +} + +static void sirfsoc_uart_insert_rx_buf_to_tty( + struct sirfsoc_uart_port *sirfport, int count) +{ + struct uart_port *port = &sirfport->port; + struct tty_port *tport = &port->state->port; + int inserted; + + inserted = tty_insert_flip_string(tport, + sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count); + port->icount.rx += inserted; + tty_flip_buffer_push(tport); +} + +static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + + sirfport->rx_dma_items[index].xmit.tail = + sirfport->rx_dma_items[index].xmit.head = 0; + sirfport->rx_dma_items[index].desc = + dmaengine_prep_slave_single(sirfport->rx_dma_chan, + sirfport->rx_dma_items[index].dma_addr, SIRFSOC_RX_DMA_BUF_SIZE, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!sirfport->rx_dma_items[index].desc) { + dev_err(port->dev, "DMA slave single fail\n"); + return; + } + sirfport->rx_dma_items[index].desc->callback = + sirfsoc_uart_rx_dma_complete_callback; + sirfport->rx_dma_items[index].desc->callback_param = sirfport; + sirfport->rx_dma_items[index].cookie = + dmaengine_submit(sirfport->rx_dma_items[index].desc); + dma_async_issue_pending(sirfport->rx_dma_chan); +} + +static void sirfsoc_rx_tmo_process_tl(unsigned long param) +{ + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; + struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; + unsigned int count; + unsigned long flags; + + spin_lock_irqsave(&sirfport->rx_lock, flags); + while (sirfport->rx_completed != sirfport->rx_issued) { + sirfsoc_uart_insert_rx_buf_to_tty(sirfport, + SIRFSOC_RX_DMA_BUF_SIZE); + sirfsoc_rx_submit_one_dma_desc(port, sirfport->rx_completed++); + sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT; + } + count = CIRC_CNT(sirfport->rx_dma_items[sirfport->rx_issued].xmit.head, + sirfport->rx_dma_items[sirfport->rx_issued].xmit.tail, + SIRFSOC_RX_DMA_BUF_SIZE); + if (count > 0) + sirfsoc_uart_insert_rx_buf_to_tty(sirfport, count); + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | + SIRFUART_IO_MODE); + sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); + spin_unlock_irqrestore(&sirfport->rx_lock, flags); + if (sirfport->rx_io_count == 4) { + spin_lock_irqsave(&sirfport->rx_lock, flags); + sirfport->rx_io_count = 0; + wr_regl(port, ureg->sirfsoc_int_st_reg, + uint_st->sirfsoc_rx_done); + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~(uint_en->sirfsoc_rx_done_en)); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_rx_done_en); + spin_unlock_irqrestore(&sirfport->rx_lock, flags); + + sirfsoc_uart_start_next_rx_dma(port); + } else { + spin_lock_irqsave(&sirfport->rx_lock, flags); + wr_regl(port, ureg->sirfsoc_int_st_reg, + uint_st->sirfsoc_rx_done); + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) | + (uint_en->sirfsoc_rx_done_en)); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_rx_done_en); + spin_unlock_irqrestore(&sirfport->rx_lock, flags); + } +} + +static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport) +{ + struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + struct dma_tx_state tx_state; + spin_lock(&sirfport->rx_lock); + + dmaengine_tx_status(sirfport->rx_dma_chan, + sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state); + dmaengine_terminate_all(sirfport->rx_dma_chan); + sirfport->rx_dma_items[sirfport->rx_issued].xmit.head = + SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue; + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~(uint_en->sirfsoc_rx_timeout_en)); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_rx_timeout_en); + spin_unlock(&sirfport->rx_lock); + tasklet_schedule(&sirfport->rx_tmo_process_tasklet); +} + +static void sirfsoc_uart_handle_rx_done(struct sirfsoc_uart_port *sirfport) +{ + struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; + + sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); + if (sirfport->rx_io_count == 4) { + sirfport->rx_io_count = 0; + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~(uint_en->sirfsoc_rx_done_en)); + else + wr_regl(port, SIRFUART_INT_EN_CLR, + uint_en->sirfsoc_rx_done_en); + wr_regl(port, ureg->sirfsoc_int_st_reg, + uint_st->sirfsoc_rx_timeout); + sirfsoc_uart_start_next_rx_dma(port); + } +} + static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) { unsigned long intr_status; @@ -343,6 +625,7 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) spin_lock(&port->lock); intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg); wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status); + intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg); if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(port, uint_st)))) { if (intr_status & uint_st->sirfsoc_rxd_brk) { port->icount.brk++; @@ -367,7 +650,8 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) } recv_char: if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) && - (intr_status & SIRFUART_CTS_INT_ST(uint_st))) { + (intr_status & SIRFUART_CTS_INT_ST(uint_st)) && + !sirfport->tx_dma_state) { cts_status = rd_regl(port, ureg->sirfsoc_afc_ctrl) & SIRFUART_AFC_CTS_STATUS; if (cts_status != 0) @@ -377,41 +661,111 @@ recv_char: uart_handle_cts_change(port, cts_status); wake_up_interruptible(&state->port.delta_msr_wait); } - if (intr_status & SIRFUART_RX_IO_INT_ST(uint_st)) - sirfsoc_uart_pio_rx_chars(port, SIRFSOC_UART_IO_RX_MAX_CNT); + if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) { + if (intr_status & uint_st->sirfsoc_rx_timeout) + sirfsoc_uart_handle_rx_tmo(sirfport); + if (intr_status & uint_st->sirfsoc_rx_done) + sirfsoc_uart_handle_rx_done(sirfport); + } else { + if (intr_status & SIRFUART_RX_IO_INT_ST(uint_st)) + sirfsoc_uart_pio_rx_chars(port, + SIRFSOC_UART_IO_RX_MAX_CNT); + } if (intr_status & uint_st->sirfsoc_txfifo_empty) { - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - spin_unlock(&port->lock); - return IRQ_HANDLED; - } else { - sirfsoc_uart_pio_tx_chars(sirfport, + if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) + sirfsoc_uart_tx_with_dma(sirfport); + else { + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + spin_unlock(&port->lock); + return IRQ_HANDLED; + } else { + sirfsoc_uart_pio_tx_chars(sirfport, SIRFSOC_UART_IO_TX_REASONABLE_CNT); - if ((uart_circ_empty(xmit)) && + if ((uart_circ_empty(xmit)) && (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & - ufifo_st->ff_empty(port->line))) - sirfsoc_uart_stop_tx(port); + ufifo_st->ff_empty(port->line))) + sirfsoc_uart_stop_tx(port); + } } } spin_unlock(&port->lock); return IRQ_HANDLED; } -static void sirfsoc_uart_start_rx(struct uart_port *port) +static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) +{ + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; + struct uart_port *port = &sirfport->port; + unsigned long flags; + spin_lock_irqsave(&sirfport->rx_lock, flags); + while (sirfport->rx_completed != sirfport->rx_issued) { + sirfsoc_uart_insert_rx_buf_to_tty(sirfport, + SIRFSOC_RX_DMA_BUF_SIZE); + sirfsoc_rx_submit_one_dma_desc(port, sirfport->rx_completed++); + sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT; + } + spin_unlock_irqrestore(&sirfport->rx_lock, flags); +} + +static void sirfsoc_uart_rx_dma_complete_callback(void *param) +{ + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; + spin_lock(&sirfport->rx_lock); + sirfport->rx_issued++; + sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT; + spin_unlock(&sirfport->rx_lock); + tasklet_schedule(&sirfport->rx_dma_complete_tasklet); +} + +/* submit rx dma task into dmaengine */ +static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long regv; - if (!sirfport->is_marco) { - regv = rd_regl(port, ureg->sirfsoc_int_en_reg); - wr_regl(port, ureg->sirfsoc_int_en_reg, regv | - SIRFUART_RX_IO_INT_EN(port, uint_en)); - } else + unsigned long flags; + int i; + spin_lock_irqsave(&sirfport->rx_lock, flags); + sirfport->rx_io_count = 0; + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & + ~SIRFUART_IO_MODE); + spin_unlock_irqrestore(&sirfport->rx_lock, flags); + for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) + sirfsoc_rx_submit_one_dma_desc(port, i); + sirfport->rx_completed = sirfport->rx_issued = 0; + spin_lock_irqsave(&sirfport->rx_lock, flags); + if (!sirfport->is_marco) wr_regl(port, ureg->sirfsoc_int_en_reg, - SIRFUART_RX_IO_INT_EN(port, uint_en)); + rd_regl(port, ureg->sirfsoc_int_en_reg) | + SIRFUART_RX_DMA_INT_EN(port, uint_en)); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + SIRFUART_RX_DMA_INT_EN(port, uint_en)); + spin_unlock_irqrestore(&sirfport->rx_lock, flags); +} + +static void sirfsoc_uart_start_rx(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + + sirfport->rx_io_count = 0; wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); + if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) + sirfsoc_uart_start_next_rx_dma(port); + else { + if (!sirfport->is_marco) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) | + SIRFUART_RX_IO_INT_EN(port, uint_en)); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + SIRFUART_RX_IO_INT_EN(port, uint_en)); + } } static unsigned int @@ -488,10 +842,9 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, unsigned long flags; unsigned long ic; unsigned int clk_div_reg = 0; - unsigned long temp_reg_val, ioclk_rate; + unsigned long txfifo_op_reg, ioclk_rate; unsigned long rx_time_out; int threshold_div; - int temp; u32 data_bit_len, stop_bit_len, len_val; unsigned long sample_div_reg = 0xf; ioclk_rate = port->uartclk; @@ -606,10 +959,10 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, /* set receive timeout && data bits len */ rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000); rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out); - temp_reg_val = rd_regl(port, ureg->sirfsoc_tx_fifo_op); + txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op); wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_tx_fifo_op, - (temp_reg_val & ~SIRFUART_FIFO_START)); + (txfifo_op_reg & ~SIRFUART_FIFO_START)); if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { config_reg |= SIRFUART_RECV_TIMEOUT(port, rx_time_out); wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); @@ -631,24 +984,118 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, (SIRFUART_RECV_TIMEOUT(port, rx_time_out)) | (sample_div_reg & 0x3f) << 16); } - wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE); - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE); + if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE); + else + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE); + if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE); + else + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE); /* Reset Rx/Tx FIFO Threshold level for proper baudrate */ if (set_baud < 1000000) threshold_div = 1; else threshold_div = 2; - temp = SIRFUART_FIFO_THD(port); - wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, temp / threshold_div); - wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, temp / threshold_div); - temp_reg_val |= SIRFUART_FIFO_START; - wr_regl(port, ureg->sirfsoc_tx_fifo_op, temp_reg_val); + wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, + SIRFUART_FIFO_THD(port) / threshold_div); + wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, + SIRFUART_FIFO_THD(port) / threshold_div); + txfifo_op_reg |= SIRFUART_FIFO_START; + wr_regl(port, ureg->sirfsoc_tx_fifo_op, txfifo_op_reg); uart_update_timeout(port, termios->c_cflag, set_baud); sirfsoc_uart_start_rx(port); wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN); spin_unlock_irqrestore(&port->lock, flags); } +static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + dma_cap_mask_t dma_mask; + struct dma_slave_config tx_slv_cfg = { + .dst_maxburst = 2, + }; + + dma_cap_zero(dma_mask); + dma_cap_set(DMA_SLAVE, dma_mask); + sirfport->tx_dma_chan = dma_request_channel(dma_mask, + (dma_filter_fn)sirfsoc_dma_filter_id, + (void *)sirfport->tx_dma_no); + if (!sirfport->tx_dma_chan) { + dev_err(port->dev, "Uart Request Dma Channel Fail %d\n", + sirfport->tx_dma_no); + return -EPROBE_DEFER; + } + dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg); + + return 0; +} + +static unsigned int sirfsoc_uart_init_rx_dma(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + dma_cap_mask_t dma_mask; + int ret; + int i, j; + struct dma_slave_config slv_cfg = { + .src_maxburst = 2, + }; + + dma_cap_zero(dma_mask); + dma_cap_set(DMA_SLAVE, dma_mask); + sirfport->rx_dma_chan = dma_request_channel(dma_mask, + (dma_filter_fn)sirfsoc_dma_filter_id, + (void *)sirfport->rx_dma_no); + if (!sirfport->rx_dma_chan) { + dev_err(port->dev, "Uart Request Dma Channel Fail %d\n", + sirfport->rx_dma_no); + ret = -EPROBE_DEFER; + goto request_err; + } + for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) { + sirfport->rx_dma_items[i].xmit.buf = + dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL); + if (!sirfport->rx_dma_items[i].xmit.buf) { + dev_err(port->dev, "Uart alloc bufa failed\n"); + ret = -ENOMEM; + goto alloc_coherent_err; + } + sirfport->rx_dma_items[i].xmit.head = + sirfport->rx_dma_items[i].xmit.tail = 0; + } + dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg); + + return 0; +alloc_coherent_err: + for (j = 0; j < i; j++) + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items[j].xmit.buf, + sirfport->rx_dma_items[j].dma_addr); + dma_release_channel(sirfport->rx_dma_chan); +request_err: + return ret; +} + +static void sirfsoc_uart_uninit_tx_dma(struct sirfsoc_uart_port *sirfport) +{ + dmaengine_terminate_all(sirfport->tx_dma_chan); + dma_release_channel(sirfport->tx_dma_chan); +} + +static void sirfsoc_uart_uninit_rx_dma(struct sirfsoc_uart_port *sirfport) +{ + int i; + struct uart_port *port = &sirfport->port; + dmaengine_terminate_all(sirfport->rx_dma_chan); + dma_release_channel(sirfport->rx_dma_chan); + for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items[i].xmit.buf, + sirfport->rx_dma_items[i].dma_addr); +} + static int sirfsoc_uart_startup(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); @@ -688,6 +1135,23 @@ static int sirfsoc_uart_startup(struct uart_port *port) wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port)); wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port)); + if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) { + ret = sirfsoc_uart_init_rx_dma(port); + if (ret) + goto init_rx_err; + wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk, + SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) | + SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) | + SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b)); + } + if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) { + sirfsoc_uart_init_tx_dma(port); + sirfport->tx_dma_state = TX_DMA_IDLE; + wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk, + SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) | + SIRFUART_TX_FIFO_CHK_LC(port->line, 0xe) | + SIRFUART_TX_FIFO_CHK_HC(port->line, 0x4)); + } sirfport->ms_enabled = false; if (sirfport->uart_reg->uart_type == SIRF_USP_UART && sirfport->hw_flow_ctrl) { @@ -728,6 +1192,12 @@ static void sirfsoc_uart_shutdown(struct uart_port *port) gpio_set_value(sirfport->rts_gpio, 1); free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport); } + if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) + sirfsoc_uart_uninit_rx_dma(sirfport); + if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) { + sirfsoc_uart_uninit_tx_dma(sirfport); + sirfport->tx_dma_state = TX_DMA_IDLE; + } } static const char *sirfsoc_uart_type(struct uart_port *port) @@ -801,6 +1271,9 @@ sirfsoc_uart_console_setup(struct console *co, char *options) uart_parse_options(options, &baud, &parity, &bits, &flow); port->cons = co; + /* default console tx/rx transfer using io mode */ + sirfport->rx_dma_no = UNVALID_DMA_CHAN; + sirfport->tx_dma_no = UNVALID_DMA_CHAN; return uart_set_options(port, co, baud, parity, bits, flow); } @@ -888,10 +1361,27 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node, "sirf,uart-has-rtscts"); - if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) + if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) { sirfport->uart_reg->uart_type = SIRF_REAL_UART; + if (of_property_read_u32(pdev->dev.of_node, + "sirf,uart-dma-rx-channel", + &sirfport->rx_dma_no)) + sirfport->rx_dma_no = UNVALID_DMA_CHAN; + if (of_property_read_u32(pdev->dev.of_node, + "sirf,uart-dma-tx-channel", + &sirfport->tx_dma_no)) + sirfport->tx_dma_no = UNVALID_DMA_CHAN; + } if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) { sirfport->uart_reg->uart_type = SIRF_USP_UART; + if (of_property_read_u32(pdev->dev.of_node, + "sirf,usp-dma-rx-channel", + &sirfport->rx_dma_no)) + sirfport->rx_dma_no = UNVALID_DMA_CHAN; + if (of_property_read_u32(pdev->dev.of_node, + "sirf,usp-dma-tx-channel", + &sirfport->tx_dma_no)) + sirfport->tx_dma_no = UNVALID_DMA_CHAN; if (!sirfport->hw_flow_ctrl) goto usp_no_flow_control; if (of_find_property(pdev->dev.of_node, "cts-gpios", NULL)) @@ -946,6 +1436,12 @@ usp_no_flow_control: ret = -EFAULT; goto err; } + spin_lock_init(&sirfport->rx_lock); + spin_lock_init(&sirfport->tx_lock); + tasklet_init(&sirfport->rx_dma_complete_tasklet, + sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport); + tasklet_init(&sirfport->rx_tmo_process_tasklet, + sirfsoc_rx_tmo_process_tl, (unsigned long)sirfport); port->mapbase = res->start; port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!port->membase) { diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index e87035a..173e00f 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -338,6 +338,12 @@ struct sirfsoc_uart_register sirfsoc_uart = { uint_st->sirfsoc_rxfifo_thd |\ uint_st->sirfsoc_rxfifo_full) #define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts) +#define SIRFUART_RX_DMA_INT_EN(port, uint_en) \ + (uint_en->sirfsoc_rx_timeout_en |\ + uint_en->sirfsoc_frm_err_en |\ + uint_en->sirfsoc_rx_oflow_en |\ + uint_en->sirfsoc_rxd_brk_en |\ + ((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en)) /* Generic Definitions */ #define SIRFSOC_UART_NAME "ttySiRF" #define SIRFSOC_UART_MAJOR 0 @@ -356,12 +362,52 @@ struct sirfsoc_uart_register sirfsoc_uart = { #define SIRF_SAMPLE_DIV_MASK 0x3f0000 #define SIRF_BAUD_RATE_SUPPORT_NR 18 +/* Uart Common Use Macro*/ +#define SIRFSOC_RX_DMA_BUF_SIZE 256 +#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3) +#define LOOP_DMA_BUFA_FILL 1 +#define LOOP_DMA_BUFB_FILL 2 +#define TX_TRAN_PIO 1 +#define TX_TRAN_DMA 2 +/* Uart Fifo Level Chk */ +#define SIRFUART_TX_FIFO_SC_OFFSET 0 +#define SIRFUART_TX_FIFO_LC_OFFSET 10 +#define SIRFUART_TX_FIFO_HC_OFFSET 20 +#define SIRFUART_TX_FIFO_CHK_SC(line, value) ((((line) == 1) ? (value & 0x3) :\ + (value & 0x1f)) << SIRFUART_TX_FIFO_SC_OFFSET) +#define SIRFUART_TX_FIFO_CHK_LC(line, value) ((((line) == 1) ? (value & 0x3) :\ + (value & 0x1f)) << SIRFUART_TX_FIFO_LC_OFFSET) +#define SIRFUART_TX_FIFO_CHK_HC(line, value) ((((line) == 1) ? (value & 0x3) :\ + (value & 0x1f)) << SIRFUART_TX_FIFO_HC_OFFSET) + +#define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC +#define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC +#define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC +/* Indicate how many buffers used */ +#define SIRFSOC_RX_LOOP_BUF_CNT 2 + +/* Indicate if DMA channel valid */ +#define IS_DMA_CHAN_VALID(x) ((x) != -1) +#define UNVALID_DMA_CHAN -1 /* For Fast Baud Rate Calculation */ struct sirfsoc_baudrate_to_regv { unsigned int baud_rate; unsigned int reg_val; }; +enum sirfsoc_tx_state { + TX_DMA_IDLE, + TX_DMA_RUNNING, + TX_DMA_PAUSE, +}; + +struct sirfsoc_loop_buffer { + struct circ_buf xmit; + dma_cookie_t cookie; + struct dma_async_tx_descriptor *desc; + dma_addr_t dma_addr; +}; + struct sirfsoc_uart_port { bool hw_flow_ctrl; bool ms_enabled; @@ -371,8 +417,25 @@ struct sirfsoc_uart_port { /* for SiRFmarco, there are SET/CLR for UART_INT_EN */ bool is_marco; struct sirfsoc_uart_register *uart_reg; + int rx_dma_no; + int tx_dma_no; + struct dma_chan *rx_dma_chan; + struct dma_chan *tx_dma_chan; + dma_addr_t tx_dma_addr; + struct dma_async_tx_descriptor *tx_dma_desc; + spinlock_t rx_lock; + spinlock_t tx_lock; + struct tasklet_struct rx_dma_complete_tasklet; + struct tasklet_struct rx_tmo_process_tasklet; + unsigned int rx_io_count; + unsigned long transfer_size; + enum sirfsoc_tx_state tx_dma_state; unsigned int cts_gpio; unsigned int rts_gpio; + + struct sirfsoc_loop_buffer rx_dma_items[SIRFSOC_RX_LOOP_BUF_CNT]; + int rx_completed; + int rx_issued; }; /* Hardware Flow Control */ -- cgit v0.10.2 From 7b013e440a4ebe05d32ad4ecd657c276f3994558 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Aug 2013 15:59:53 -0700 Subject: Revert "serial: omap: Fix IRQ handling return value" This reverts commit 908fd7e566b4c12e36e4487d2d5946de5e5ea30f. Kevin writes: Greg, without a better justification in the changelog, I think this patch should be dropped from tty-next. Reported-by: Kevin Hilman Cc: Ruchika Kharwar Cc: Alexander Savchenko Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 2fa7b5c..b0f46e6 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -538,6 +538,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) struct uart_omap_port *up = dev_id; unsigned int iir, lsr; unsigned int type; + irqreturn_t ret = IRQ_NONE; int max_count = 256; spin_lock(&up->port.lock); @@ -548,6 +549,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) if (iir & UART_IIR_NO_INT) break; + ret = IRQ_HANDLED; lsr = serial_in(up, UART_LSR); /* extract IRQ type from IIR register */ @@ -586,7 +588,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) pm_runtime_put_autosuspend(up->dev); up->port_activity = jiffies; - return IRQ_HANDLED; + return ret; } static unsigned int serial_omap_tx_empty(struct uart_port *port) -- cgit v0.10.2 From 355fe568e285815e6f62fcd004ca80085ae46a69 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Aug 2013 16:02:18 -0700 Subject: Revert "OMAP: UART: Keep the TX fifo full when possible" This reverts commit c4415084218c68c5ee2fc583431e89a78d896b19. Kevin writes: Hmm, another OMAP serial patch that wasn't Cc'd to linux-omap where OMAP users might have seen it. :( I just bisected a strange problem in linux-next on OMAP3 down to this patch. Reverting it fixes the problem. On OMAP3530 Beagle and Overo, after boot, doing a 'cat /proc/cpuinfo' was not returning to a prompt, suggesting something strange with the FIFO. Hitting return gets me back to a prompt. Greg, this one should also be dropped from tty-next until it can be further investgated and the problem solved. Reported-by: Kevin Hilman Cc: Dmitry Fink Cc: Alexander Savchenko Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index b0f46e6..816d1a2 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -350,8 +350,7 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) serial_omap_stop_tx(&up->port); return; } - count = up->port.fifosize - - (serial_in(up, UART_OMAP_TXFIFO_LVL) & 0xFF); + count = up->port.fifosize / 4; do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 97c26be..e632260 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -366,7 +366,6 @@ #define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ #define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ -#define UART_OMAP_TXFIFO_LVL 0x1A /* TX FIFO fullness */ /* * These are definitions for the Exar XR17V35X and XR17(C|D)15X -- cgit v0.10.2 From 53dd0ba7a6f48ddc7ee044dcef838a0f8e7fec9b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:05 +0530 Subject: tty: serial: altera_jtag: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Cc: Tobias Klauser Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 2299a34..18e038f 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -139,7 +139,9 @@ static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp) uart_insert_char(port, 0, 0, ch, flag); } + spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); } static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) -- cgit v0.10.2 From dd085ed8ef6c97e0b606da304856b36e0d3496ac Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:06 +0530 Subject: tty: serial: altera: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Cc: Tobias Klauser Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index fa638db..6431472 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -231,7 +231,9 @@ static void altera_uart_rx_chars(struct altera_uart *pp) flag); } + spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); } static void altera_uart_tx_chars(struct altera_uart *pp) -- cgit v0.10.2 From 78d34d75c84d99ad61f6677a34c136f0adc6d78d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:07 +0530 Subject: tty: serial: apbuart: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index 6331464..de11ab8 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -125,7 +125,9 @@ static void apbuart_rx_chars(struct uart_port *port) status = UART_GET_STATUS(port); } + spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); } static void apbuart_tx_chars(struct uart_port *port) -- cgit v0.10.2 From b16c8e3eed122ec0ddac30de6cc8a904463478b6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:08 +0530 Subject: tty: serial: ar933x: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index a712a3f..78be13a 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -322,7 +322,9 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) tty_insert_flip_char(port, ch, TTY_NORMAL); } while (max_count-- > 0); + spin_unlock(&up->port.lock); tty_flip_buffer_push(port); + spin_lock(&up->port.lock); } static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) -- cgit v0.10.2 From 3fa1200851c7ff88950042d827554334dba8b58d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:09 +0530 Subject: tty: serial: arc: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 37abf6c..569872f 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -251,7 +251,9 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status) if (!(uart_handle_sysrq_char(&uart->port, ch))) uart_insert_char(&uart->port, status, RXOERR, ch, flg); + spin_unlock(&uart->port.lock); tty_flip_buffer_push(&uart->port.state->port); + spin_lock(&uart->port.lock); } while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)); } -- cgit v0.10.2 From b4d499241c340e40753e0f4245a1228b201c6c0e Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:10 +0530 Subject: tty: serial: bcm63xx: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index d14ba5a..649d512 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -302,7 +302,9 @@ static void bcm_uart_do_rx(struct uart_port *port) } while (--max_count); + spin_unlock(&port->lock); tty_flip_buffer_push(tty_port); + spin_lock(&port->lock); } /* -- cgit v0.10.2 From 88c54a68584c93ddc5fbb70ffe60b195097b6eb9 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:11 +0530 Subject: tty: serial: bfin_sport: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index 016c3e9..87636cc 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -161,11 +161,12 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) if (!uart_handle_sysrq_char(&up->port, ch)) tty_insert_flip_char(port, ch, TTY_NORMAL); } - /* XXX this won't deadlock with lowlat? */ - tty_flip_buffer_push(port); spin_unlock(&up->port.lock); + /* XXX this won't deadlock with lowlat? */ + tty_flip_buffer_push(port); + return IRQ_HANDLED; } -- cgit v0.10.2 From 9dc99e10f068fb2175bf15cbaf4744aebc6fbd9a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:12 +0530 Subject: tty: serial: efm32: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index 98adaa1..0eb5b56 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -268,10 +268,10 @@ static irqreturn_t efm32_uart_rxirq(int irq, void *data) handled = IRQ_HANDLED; } - tty_flip_buffer_push(tport); - spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + return handled; } -- cgit v0.10.2 From 5faf75d7fed2a27c6cd3a2669b2bad22c0dc640f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:13 +0530 Subject: tty: serial: icom: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 06555dd..7c9a067 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -834,7 +834,10 @@ ignore_char: status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); } icom_port->next_rcv = rcv_buff; + + spin_unlock(&icom_port->uart_port.lock); tty_flip_buffer_push(port); + spin_lock(&icom_port->uart_port.lock); } static void process_interrupt(u16 port_int_reg, -- cgit v0.10.2 From 97f2c4289c591c2f24fb4a4cc03d78a0bef93187 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:14 +0530 Subject: tty: serial: lpc32xx_hs: don't call tty_flip_buffer_push() twice serial_lpc32xx_interrupt() calls __serial_lpc32xx_rx() first and then tty_flip_buffer_push() immediately after that. But last statement of __serial_lpc32xx_rx() already called tty_flip_buffer_push().. So, probably its not required to be called twice. Lets remove one of them. Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index dffea6b..8fdf6a8 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -351,10 +351,8 @@ static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id) } /* Data received? */ - if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) { + if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) __serial_lpc32xx_rx(port); - tty_flip_buffer_push(tport); - } /* Transmit data request? */ if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) { -- cgit v0.10.2 From ec128510905caf078d82d9f95fd872e97192fd93 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:15 +0530 Subject: tty: serial: lpc32xx_hs: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 8fdf6a8..701644f 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -279,7 +279,10 @@ static void __serial_lpc32xx_rx(struct uart_port *port) tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); } + + spin_unlock(&port->lock); tty_flip_buffer_push(tport); + spin_lock(&port->lock); } static void __serial_lpc32xx_tx(struct uart_port *port) -- cgit v0.10.2 From af89f837b8256b74ef73b3aefe1860ca3edefe2e Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:16 +0530 Subject: tty: serial: m32r_sio: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index bb1afa0..9cd9b4e 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -368,7 +368,10 @@ static void receive_chars(struct uart_sio_port *up, int *status) ignore_char: *status = serial_in(up, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + + spin_unlock(&up->port.lock); tty_flip_buffer_push(port); + spin_lock(&up->port.lock); } static void transmit_chars(struct uart_sio_port *up) -- cgit v0.10.2 From 5275ad70fed320f6264d98f0b6f32c06941ccf26 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:17 +0530 Subject: tty: serial: mcf: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index a2e97c9..0edfaf8 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -325,7 +325,9 @@ static void mcf_rx_chars(struct mcf_uart *pp) uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); } + spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); } /****************************************************************************/ -- cgit v0.10.2 From 8dedc88776319f06cca3f25e7ec543244015a800 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:18 +0530 Subject: tty: serial: mfd: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 4a82267..d3db042 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -386,7 +386,7 @@ static void serial_hsu_stop_tx(struct uart_port *port) /* This is always called in spinlock protected mode, so * modify timeout timer is safe here */ -void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) +void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts, unsigned long *flags) { struct hsu_dma_buffer *dbuf = &up->rxbuf; struct hsu_dma_chan *chan = up->rxc; @@ -438,7 +438,9 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) | (0x1 << 16) | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ ); + spin_unlock_irqrestore(&up->port.lock, *flags); tty_flip_buffer_push(tport); + spin_lock_irqsave(&up->port.lock, *flags); chan_writel(chan, HSU_CH_CR, 0x3); @@ -459,7 +461,8 @@ static void serial_hsu_stop_rx(struct uart_port *port) } } -static inline void receive_chars(struct uart_hsu_port *up, int *status) +static inline void receive_chars(struct uart_hsu_port *up, int *status, + unsigned long *flags) { unsigned int ch, flag; unsigned int max_count = 256; @@ -519,7 +522,10 @@ static inline void receive_chars(struct uart_hsu_port *up, int *status) ignore_char: *status = serial_in(up, UART_LSR); } while ((*status & UART_LSR_DR) && max_count--); + + spin_unlock_irqrestore(&up->port.lock, *flags); tty_flip_buffer_push(&up->port.state->port); + spin_lock_irqsave(&up->port.lock, *flags); } static void transmit_chars(struct uart_hsu_port *up) @@ -613,7 +619,7 @@ static irqreturn_t port_irq(int irq, void *dev_id) lsr = serial_in(up, UART_LSR); if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); + receive_chars(up, &lsr, &flags); check_modem_status(up); /* lsr will be renewed during the receive_chars */ @@ -643,7 +649,7 @@ static inline void dma_chan_irq(struct hsu_dma_chan *chan) /* Rx channel */ if (chan->dirt == DMA_FROM_DEVICE) - hsu_dma_rx(up, int_sts); + hsu_dma_rx(up, int_sts, &flags); /* Tx channel */ if (chan->dirt == DMA_TO_DEVICE) { -- cgit v0.10.2 From bf7f5ee36ec356c50821e865f8a1d3871a2d9810 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:19 +0530 Subject: tty: serial: mpsc: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index fba5257..8d70267 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -934,7 +934,7 @@ static int serial_polled; ****************************************************************************** */ -static int mpsc_rx_intr(struct mpsc_port_info *pi) +static int mpsc_rx_intr(struct mpsc_port_info *pi, unsigned long *flags) { struct mpsc_rx_desc *rxre; struct tty_port *port = &pi->port.state->port; @@ -969,8 +969,11 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi) #endif /* Following use of tty struct directly is deprecated */ if (tty_buffer_request_room(port, bytes_in) < bytes_in) { - if (port->low_latency) + if (port->low_latency) { + spin_unlock_irqrestore(&pi->port.lock, *flags); tty_flip_buffer_push(port); + spin_lock_irqsave(&pi->port.lock, *flags); + } /* * If this failed then we will throw away the bytes * but must do so to clear interrupts. @@ -1080,7 +1083,9 @@ next_frame: if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) mpsc_start_rx(pi); + spin_unlock_irqrestore(&pi->port.lock, *flags); tty_flip_buffer_push(port); + spin_lock_irqsave(&pi->port.lock, *flags); return rc; } @@ -1222,7 +1227,7 @@ static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id) spin_lock_irqsave(&pi->port.lock, iflags); mpsc_sdma_intr_ack(pi); - if (mpsc_rx_intr(pi)) + if (mpsc_rx_intr(pi, &iflags)) rc = IRQ_HANDLED; if (mpsc_tx_intr(pi)) rc = IRQ_HANDLED; -- cgit v0.10.2 From f77232dab25b8d805efb8b9186d81162531360ab Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:20 +0530 Subject: tty: serial: msm: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Cc: David Brown (maintainer:ARM/QUALCOMM MSM...) Cc: Daniel Walker (maintainer:ARM/QUALCOMM MSM...) Cc: Bryan Huntsman (maintainer:ARM/QUALCOMM MSM...) Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 8f58540..cc44ef4 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -140,7 +140,10 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr) count -= 4; } + spin_unlock(&port->lock); tty_flip_buffer_push(tport); + spin_lock(&port->lock); + if (misr & (UART_IMR_RXSTALE)) msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); msm_write(port, 0xFFFFFF, UARTDM_DMRX); @@ -192,7 +195,9 @@ static void handle_rx(struct uart_port *port) tty_insert_flip_char(tport, c, flag); } + spin_unlock(&port->lock); tty_flip_buffer_push(tport); + spin_lock(&port->lock); } static void reset_dm_count(struct uart_port *port, int count) -- cgit v0.10.2 From c8db1d97cbc723d315213df6893c765213294bfe Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:21 +0530 Subject: tty: serial: netx: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c index ce04f3f..0a4dd70 100644 --- a/drivers/tty/serial/netx-serial.c +++ b/drivers/tty/serial/netx-serial.c @@ -196,7 +196,7 @@ static void netx_txint(struct uart_port *port) uart_write_wakeup(port); } -static void netx_rxint(struct uart_port *port) +static void netx_rxint(struct uart_port *port, unsigned long *flags) { unsigned char rx, flg, status; @@ -236,7 +236,9 @@ static void netx_rxint(struct uart_port *port) uart_insert_char(port, status, SR_OE, rx, flg); } + spin_unlock_irqrestore(&port->lock, *flags); tty_flip_buffer_push(&port->state->port); + spin_lock_irqsave(&port->lock, *flags); } static irqreturn_t netx_int(int irq, void *dev_id) @@ -250,7 +252,7 @@ static irqreturn_t netx_int(int irq, void *dev_id) status = readl(port->membase + UART_IIR) & IIR_MASK; while (status) { if (status & IIR_RIS) - netx_rxint(port); + netx_rxint(port, &flags); if (status & IIR_TIS) netx_txint(port); if (status & IIR_MIS) { -- cgit v0.10.2 From 931c05782d7316a5b5f0fcba033ea2cecdf896ea Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:22 +0530 Subject: tty: serial: nwpserial: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c index 549c70a..693bc6c 100644 --- a/drivers/tty/serial/nwpserial.c +++ b/drivers/tty/serial/nwpserial.c @@ -149,7 +149,10 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) tty_insert_flip_char(port, ch, TTY_NORMAL); } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); + spin_unlock(&up->port.lock); tty_flip_buffer_push(port); + spin_lock(&up->port.lock); + ret = IRQ_HANDLED; /* clear interrupt */ -- cgit v0.10.2 From 1df7e2491f8b3ecc4c7bc16dfd76b6d296334750 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:23 +0530 Subject: tty: serial: pnx8xxx: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c index b6b7aca..de6c05c 100644 --- a/drivers/tty/serial/pnx8xxx_uart.c +++ b/drivers/tty/serial/pnx8xxx_uart.c @@ -237,7 +237,10 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); } + + spin_unlock(&sport->port.lock); tty_flip_buffer_push(&sport->port.state->port); + spin_lock(&sport->port.lock); } static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) -- cgit v0.10.2 From de7053c77123940ac294508d2161f42063d4166a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:24 +0530 Subject: tty: serial: rp2: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c index a314a94..328d6de 100644 --- a/drivers/tty/serial/rp2.c +++ b/drivers/tty/serial/rp2.c @@ -427,7 +427,9 @@ static void rp2_rx_chars(struct rp2_uart_port *up) up->port.icount.rx++; } + spin_unlock(&up->port.lock); tty_flip_buffer_push(port); + spin_lock(&up->port.lock); } static void rp2_tx_chars(struct rp2_uart_port *up) -- cgit v0.10.2 From 53e0e6706c7669ddda8a9b2b7412e4ba7f75f046 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:25 +0530 Subject: tty: serial: sa1100: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index fc23ea19..ba25722 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -232,7 +232,10 @@ sa1100_rx_chars(struct sa1100_port *sport) status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | UTSR0_TO_SM(UART_GET_UTSR0(sport)); } + + spin_unlock(&sport->port.lock); tty_flip_buffer_push(&sport->port.state->port); + spin_lock(&sport->port.lock); } static void sa1100_tx_chars(struct sa1100_port *sport) -- cgit v0.10.2 From f5693ea2710cd9f26ed2bfa917f7ed68e9502464 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:26 +0530 Subject: tty: serial: samsung: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 019b915..f3dfa19 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -249,6 +249,8 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id) ufcon |= S3C2410_UFCON_RESETRX; wr_regl(port, S3C2410_UFCON, ufcon); rx_enabled(port) = 1; + spin_unlock_irqrestore(&port->lock, + flags); goto out; } continue; @@ -297,10 +299,11 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id) ignore_char: continue; } + + spin_unlock_irqrestore(&port->lock, flags); tty_flip_buffer_push(&port->state->port); out: - spin_unlock_irqrestore(&port->lock, flags); return IRQ_HANDLED; } -- cgit v0.10.2 From 9b88748b362c3b449bfac05ae1353b73b40a785f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:27 +0530 Subject: tty: serial: tegra: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Cc: Stephen Warren Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 94a2484..d0d972f 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -571,7 +571,9 @@ static void tegra_uart_rx_dma_complete(void *args) tegra_uart_handle_rx_pio(tup, port); if (tty) { + spin_unlock_irqrestore(&u->lock, flags); tty_flip_buffer_push(port); + spin_lock_irqsave(&u->lock, flags); tty_kref_put(tty); } tegra_uart_start_rx_dma(tup); @@ -583,11 +585,13 @@ static void tegra_uart_rx_dma_complete(void *args) spin_unlock_irqrestore(&u->lock, flags); } -static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup) +static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup, + unsigned long *flags) { struct dma_tx_state state; struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); struct tty_port *port = &tup->uport.state->port; + struct uart_port *u = &tup->uport; int count; /* Deactivate flow control to stop sender */ @@ -604,7 +608,9 @@ static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup) tegra_uart_handle_rx_pio(tup, port); if (tty) { + spin_unlock_irqrestore(&u->lock, *flags); tty_flip_buffer_push(port); + spin_lock_irqsave(&u->lock, *flags); tty_kref_put(tty); } tegra_uart_start_rx_dma(tup); @@ -671,7 +677,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) iir = tegra_uart_read(tup, UART_IIR); if (iir & UART_IIR_NO_INT) { if (is_rx_int) { - tegra_uart_handle_rx_dma(tup); + tegra_uart_handle_rx_dma(tup, &flags); if (tup->rx_in_progress) { ier = tup->ier_shadow; ier |= (UART_IER_RLSI | UART_IER_RTOIE | -- cgit v0.10.2 From 8b9ade9f74f8a27991ba662cd7544daab6f81544 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:28 +0530 Subject: tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index b8d7eb3..96304cd 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -421,7 +421,10 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) sirfport->rx_io_count += rx_count; port->icount.rx += rx_count; + + spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); return rx_count; } -- cgit v0.10.2 From de49df58366f88939009d5de06d71a68c701df08 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 19 Aug 2013 20:14:29 +0530 Subject: tty: serial: vt8500: drop uart_port->lock before calling tty_flip_buffer_push() The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Cc: Tony Prisk Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index a90bf04..93b697a 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -170,7 +170,9 @@ static void handle_rx(struct uart_port *port) tty_insert_flip_char(tport, c, flag); } + spin_unlock(&port->lock); tty_flip_buffer_push(tport); + spin_lock(&port->lock); } static void handle_tx(struct uart_port *port) -- cgit v0.10.2 From bfaddb7d13ffd5db0180f0121447e2ca4ce3020e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 20 Aug 2013 23:48:02 -0700 Subject: msm_serial: Switch clock consumer strings and simplify code In downstream kernel we've standardized the clock consumer names that MSM device drivers use. Replace the uart specific clock names in this driver with the more standard 'core' and 'iface' names. Also simplify the code by assuming that clk_prepare_enable and clk_disable_unprepare() will properly check for NULL pointers (it will because MSM uses the common clock framework). Cc: David Brown Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index 6d50fb9..d83404d 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -456,9 +456,9 @@ static struct clk_pcom_desc msm_clocks_7x01a[] = { CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART1_CLK, "msm_serial.0", OFF), - CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), - CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), + CLK_PCOM("core", UART1_CLK, "msm_serial.0", OFF), + CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), + CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF), diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index d4db75a..14e2869 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -211,7 +211,7 @@ static struct clk_pcom_desc msm_clocks_7x30[] = { CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), + CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index f551811..2ed89b2 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -358,9 +358,9 @@ static struct clk_pcom_desc msm_clocks_8x50[] = { CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART1_CLK, NULL, OFF), - CLK_PCOM("uart_clk", UART2_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), + CLK_PCOM("core", UART1_CLK, NULL, OFF), + CLK_PCOM("core", UART2_CLK, NULL, 0), + CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index cc44ef4..6789435 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -422,8 +422,7 @@ static void msm_init_clock(struct uart_port *port) struct msm_port *msm_port = UART_TO_MSM(port); clk_prepare_enable(msm_port->clk); - if (!IS_ERR(msm_port->pclk)) - clk_prepare_enable(msm_port->pclk); + clk_prepare_enable(msm_port->pclk); msm_serial_set_mnd_regs(port); } @@ -701,13 +700,11 @@ static void msm_power(struct uart_port *port, unsigned int state, switch (state) { case 0: clk_prepare_enable(msm_port->clk); - if (!IS_ERR(msm_port->pclk)) - clk_prepare_enable(msm_port->pclk); + clk_prepare_enable(msm_port->pclk); break; case 3: clk_disable_unprepare(msm_port->clk); - if (!IS_ERR(msm_port->pclk)) - clk_disable_unprepare(msm_port->pclk); + clk_disable_unprepare(msm_port->pclk); break; default: printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state); @@ -895,18 +892,12 @@ static int __init msm_serial_probe(struct platform_device *pdev) else msm_port->is_uartdm = 0; - if (msm_port->is_uartdm) { - msm_port->clk = devm_clk_get(&pdev->dev, "gsbi_uart_clk"); - msm_port->pclk = devm_clk_get(&pdev->dev, "gsbi_pclk"); - } else { - msm_port->clk = devm_clk_get(&pdev->dev, "uart_clk"); - msm_port->pclk = ERR_PTR(-ENOENT); - } - + msm_port->clk = devm_clk_get(&pdev->dev, "core"); if (IS_ERR(msm_port->clk)) return PTR_ERR(msm_port->clk); if (msm_port->is_uartdm) { + msm_port->pclk = devm_clk_get(&pdev->dev, "iface"); if (IS_ERR(msm_port->pclk)) return PTR_ERR(msm_port->pclk); -- cgit v0.10.2 From c3b5d3be7e354d4e05ae433b9c733330c65b8b34 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 20 Aug 2013 23:48:04 -0700 Subject: msm_serial: Add support for non-GSBI UARTDM devices Not all UARTDM hardware is part of a GSBI complex. Add support for these devices and fix a bug where we assumed uartdm meant the hardware was part of a GSBI complex. Cc: David Brown Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 6789435..5a75039 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -678,7 +678,7 @@ static void msm_config_port(struct uart_port *port, int flags) if (ret) return; } - if (msm_port->is_uartdm) + if (msm_port->gsbi_base) writel_relaxed(GSBI_PROTOCOL_UART, msm_port->gsbi_base + GSBI_CONTROL); } @@ -868,6 +868,11 @@ static struct uart_driver msm_uart_driver = { static atomic_t msm_uart_next_id = ATOMIC_INIT(0); +static const struct of_device_id msm_uartdm_table[] = { + { .compatible = "qcom,msm-uartdm" }, + { } +}; + static int __init msm_serial_probe(struct platform_device *pdev) { struct msm_port *msm_port; @@ -887,7 +892,7 @@ static int __init msm_serial_probe(struct platform_device *pdev) port->dev = &pdev->dev; msm_port = UART_TO_MSM(port); - if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) + if (of_match_device(msm_uartdm_table, &pdev->dev)) msm_port->is_uartdm = 1; else msm_port->is_uartdm = 0; @@ -934,6 +939,7 @@ static int msm_serial_remove(struct platform_device *pdev) static struct of_device_id msm_match_table[] = { { .compatible = "qcom,msm-uart" }, + { .compatible = "qcom,msm-uartdm" }, {} }; -- cgit v0.10.2 From a3957e80eb56059698676694ee500cfbe5b8972b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 20 Aug 2013 23:48:06 -0700 Subject: msm_serial: Send more than 1 character on the console w/ UARTDM We recently added support to send more than one character at a time for UARTDM hardware but we didn't add the same support in the console code path. Add support here to speed up console messages on UARTDM hardware. Cc: David Brown Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 5a75039..b5d779c 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -769,32 +769,63 @@ static inline struct uart_port *get_port_from_line(unsigned int line) } #ifdef CONFIG_SERIAL_MSM_CONSOLE - -static void msm_console_putchar(struct uart_port *port, int c) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - if (msm_port->is_uartdm) - reset_dm_count(port, 1); - - while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) - ; - msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF); -} - static void msm_console_write(struct console *co, const char *s, unsigned int count) { + int i; struct uart_port *port; struct msm_port *msm_port; + int num_newlines = 0; + bool replaced = false; BUG_ON(co->index < 0 || co->index >= UART_NR); port = get_port_from_line(co->index); msm_port = UART_TO_MSM(port); + /* Account for newlines that will get a carriage return added */ + for (i = 0; i < count; i++) + if (s[i] == '\n') + num_newlines++; + count += num_newlines; + spin_lock(&port->lock); - uart_console_write(port, s, count, msm_console_putchar); + if (msm_port->is_uartdm) + reset_dm_count(port, count); + + i = 0; + while (i < count) { + int j; + unsigned int num_chars; + char buf[4] = { 0 }; + unsigned int *bf = (unsigned int *)&buf; + + if (msm_port->is_uartdm) + num_chars = min(count - i, (unsigned int)sizeof(buf)); + else + num_chars = 1; + + for (j = 0; j < num_chars; j++) { + char c = *s; + + if (c == '\n' && !replaced) { + buf[j] = '\r'; + j++; + replaced = true; + } + if (j < num_chars) { + buf[j] = c; + s++; + replaced = false; + } + } + + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + msm_write(port, *bf, msm_port->is_uartdm ? UARTDM_TF : UART_TF); + i += num_chars; + } spin_unlock(&port->lock); } -- cgit v0.10.2 From 46ddeff30e59749aecff9b1357855f7d7bfe74b8 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 22 Aug 2013 11:06:47 +0900 Subject: serial: st-asc: remove unnecessary platform_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 4f5caa38..21e6e84 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -753,7 +753,6 @@ static int asc_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); return uart_remove_one_port(&asc_uart_driver, port); } -- cgit v0.10.2 From 1b2a405bbacc513627be875515bff4af5b498346 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 22 Aug 2013 11:08:04 +0900 Subject: TTY: amiserial, remove unnecessary platform_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 083710e..2b86f8e 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1785,8 +1785,6 @@ static int __exit amiga_serial_remove(struct platform_device *pdev) free_irq(IRQ_AMIGA_TBE, state); free_irq(IRQ_AMIGA_RBF, state); - platform_set_drvdata(pdev, NULL); - return error; } -- cgit v0.10.2 From 4f03ffcd3e8a8860c9adc153f03bf2ed7d428f2b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 26 Aug 2013 18:10:01 +0300 Subject: serial: icom: move array overflow checks earlier This code does an annoying thing where it writes to the array and then checks later for array overflows. I don't know if it's actually possible to overflow but let's check before using the array index. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 7c9a067..d98e433 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -297,25 +297,25 @@ static void stop_processor(struct icom_port *icom_port) spin_lock_irqsave(&icom_lock, flags); port = icom_port->port; + if (port >= ARRAY_SIZE(stop_proc)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } + if (port == 0 || port == 1) stop_proc[port].global_control_reg = &icom_port->global_reg->control; else stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; + temp = readl(stop_proc[port].global_control_reg); + temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + writel(temp, stop_proc[port].global_control_reg); - if (port < 4) { - temp = readl(stop_proc[port].global_control_reg); - temp = - (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; - writel(temp, stop_proc[port].global_control_reg); - - /* write flush */ - readl(stop_proc[port].global_control_reg); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } + /* write flush */ + readl(stop_proc[port].global_control_reg); +unlock: spin_unlock_irqrestore(&icom_lock, flags); } @@ -328,23 +328,25 @@ static void start_processor(struct icom_port *icom_port) spin_lock_irqsave(&icom_lock, flags); port = icom_port->port; + if (port >= ARRAY_SIZE(start_proc)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } + if (port == 0 || port == 1) start_proc[port].global_control_reg = &icom_port->global_reg->control; else start_proc[port].global_control_reg = &icom_port->global_reg->control_2; - if (port < 4) { - temp = readl(start_proc[port].global_control_reg); - temp = - (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; - writel(temp, start_proc[port].global_control_reg); - /* write flush */ - readl(start_proc[port].global_control_reg); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } + temp = readl(start_proc[port].global_control_reg); + temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + writel(temp, start_proc[port].global_control_reg); + + /* write flush */ + readl(start_proc[port].global_control_reg); +unlock: spin_unlock_irqrestore(&icom_lock, flags); } @@ -557,6 +559,12 @@ static int startup(struct icom_port *icom_port) */ spin_lock_irqsave(&icom_lock, flags); port = icom_port->port; + if (port >= ARRAY_SIZE(int_mask_tbl)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } + if (port == 0 || port == 1) int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; else @@ -566,17 +574,14 @@ static int startup(struct icom_port *icom_port) writew(0x00FF, icom_port->int_reg); else writew(0x3F00, icom_port->int_reg); - if (port < 4) { - temp = readl(int_mask_tbl[port].global_int_mask); - writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); - /* write flush */ - readl(int_mask_tbl[port].global_int_mask); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); +unlock: spin_unlock_irqrestore(&icom_lock, flags); return 0; } @@ -595,21 +600,23 @@ static void shutdown(struct icom_port *icom_port) * disable all interrupts */ port = icom_port->port; + if (port >= ARRAY_SIZE(int_mask_tbl)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } if (port == 0 || port == 1) int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; else int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; - if (port < 4) { - temp = readl(int_mask_tbl[port].global_int_mask); - writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); - /* write flush */ - readl(int_mask_tbl[port].global_int_mask); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + +unlock: spin_unlock_irqrestore(&icom_lock, flags); /* -- cgit v0.10.2 From 459f15c45eee9136c3ceb7d9c1f88d5f2f225689 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Sun, 25 Aug 2013 20:18:40 +0800 Subject: serial: sirf: define macro for some magic numbers of USP this patch clears some magic numbers for offset and bitshift of USP registers. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 96304cd..aaa3ce2 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -951,11 +951,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) / (sample_div_reg + 1)); /* setting usp mode 2 */ - len_val = ((1 << 0) | (1 << 8)); - len_val |= ((clk_div_reg & 0x3ff) << 21); - wr_regl(port, ureg->sirfsoc_mode2, - len_val); - + len_val = ((1 << SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET) | + (1 << SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET)); + len_val |= ((clk_div_reg & SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK) + << SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET); + wr_regl(port, ureg->sirfsoc_mode2, len_val); } if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, set_baud, set_baud); @@ -963,7 +963,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000); rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out); txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_STOP); wr_regl(port, ureg->sirfsoc_tx_fifo_op, (txfifo_op_reg & ~SIRFUART_FIFO_START)); if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { @@ -971,21 +971,28 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); } else { /*tx frame ctrl*/ - len_val = (data_bit_len - 1) << 0; - len_val |= (data_bit_len + 1 + stop_bit_len - 1) << 16; - len_val |= ((data_bit_len - 1) << 24); - len_val |= (((clk_div_reg & 0xc00) >> 10) << 30); + len_val = (data_bit_len - 1) << SIRFSOC_USP_TX_DATA_LEN_OFFSET; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << + SIRFSOC_USP_TX_FRAME_LEN_OFFSET; + len_val |= ((data_bit_len - 1) << + SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET); + len_val |= (((clk_div_reg & 0xc00) >> 10) << + SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET); wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val); /*rx frame ctrl*/ - len_val = (data_bit_len - 1) << 0; - len_val |= (data_bit_len + 1 + stop_bit_len - 1) << 8; - len_val |= (data_bit_len - 1) << 16; - len_val |= (((clk_div_reg & 0xf000) >> 12) << 24); + len_val = (data_bit_len - 1) << SIRFSOC_USP_RX_DATA_LEN_OFFSET; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << + SIRFSOC_USP_RX_FRAME_LEN_OFFSET; + len_val |= (data_bit_len - 1) << + SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET; + len_val |= (((clk_div_reg & 0xf000) >> 12) << + SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET); wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val); /*async param*/ wr_regl(port, ureg->sirfsoc_async_param_reg, (SIRFUART_RECV_TIMEOUT(port, rx_time_out)) | - (sample_div_reg & 0x3f) << 16); + (sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) << + SIRFSOC_USP_ASYNC_DIV2_OFFSET); } if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE); diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 173e00f..c43333d 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -311,6 +311,21 @@ struct sirfsoc_uart_register sirfsoc_uart = { /* USP SPEC */ #define SIRFSOC_USP_ENDIAN_CTRL_LSBF BIT(4) #define SIRFSOC_USP_EN BIT(5) +#define SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET 0 +#define SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET 8 +#define SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK 0x3ff +#define SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET 21 +#define SIRFSOC_USP_TX_DATA_LEN_OFFSET 0 +#define SIRFSOC_USP_TX_SYNC_LEN_OFFSET 8 +#define SIRFSOC_USP_TX_FRAME_LEN_OFFSET 16 +#define SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET 24 +#define SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET 30 +#define SIRFSOC_USP_RX_DATA_LEN_OFFSET 0 +#define SIRFSOC_USP_RX_FRAME_LEN_OFFSET 8 +#define SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET 16 +#define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24 +#define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f +#define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16 /* USP-UART Common */ #define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) -- cgit v0.10.2 From b60dfbae4151fe8c8a59724c43f5f3f66d51695f Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Sun, 25 Aug 2013 20:18:41 +0800 Subject: serial: sirf: fix the amount of serial ports SiRFprimaII has three uart ports and three USP-based ports, so there are totally six lines instead of five. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index aaa3ce2..61c1ad0 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -96,6 +96,13 @@ static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = { .line = 4, }, }, + [5] = { + .port = { + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF, + .line = 5, + }, + }, }; static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port) diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index c43333d..fb8d0a0 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -365,7 +365,7 @@ struct sirfsoc_uart_register sirfsoc_uart = { #define SIRFSOC_UART_MINOR 0 #define SIRFUART_PORT_NAME "sirfsoc-uart" #define SIRFUART_MAP_SIZE 0x200 -#define SIRFSOC_UART_NR 5 +#define SIRFSOC_UART_NR 6 #define SIRFSOC_PORT_TYPE 0xa5 /* Baud Rate Calculation */ -- cgit v0.10.2 From a416bfa2a6b4e00a7bc69641b8fc2414873a5fd9 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 21 Aug 2013 17:59:24 +0200 Subject: tty: serial: cpm_uart: Adding proper request of GPIO used by cpm_uart driver cpm_uart serial driver uses GPIO for control signals. In order to be used properly, GPIOs have to be reserved. Comment in gpiolib.c considers illegal the use of GPIOs without requesting them. In addition, the direction of the GPIO has to be set properly. Signed-off-by: Christophe Leroy Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index f7672ca..1a535f7 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1213,8 +1213,32 @@ static int cpm_uart_init_port(struct device_node *np, goto out_pram; } - for (i = 0; i < NUM_GPIOS; i++) - pinfo->gpios[i] = of_get_gpio(np, i); + for (i = 0; i < NUM_GPIOS; i++) { + int gpio; + + pinfo->gpios[i] = -1; + + gpio = of_get_gpio(np, i); + + if (gpio_is_valid(gpio)) { + ret = gpio_request(gpio, "cpm_uart"); + if (ret) { + pr_err("can't request gpio #%d: %d\n", i, ret); + continue; + } + if (i == GPIO_RTS || i == GPIO_DTR) + ret = gpio_direction_output(gpio, 0); + else + ret = gpio_direction_input(gpio); + if (ret) { + pr_err("can't set direction for gpio #%d: %d\n", + i, ret); + gpio_free(gpio); + continue; + } + pinfo->gpios[i] = gpio; + } + } #ifdef CONFIG_PPC_EARLY_DEBUG_CPM udbg_putc = NULL; -- cgit v0.10.2 From 15ef17f622033455dcf03ae96256e474073a7b11 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 28 Aug 2013 10:09:28 +0200 Subject: tty: ar933x_uart: use the clk API to get the uart clock The AR933x UARTs are only used on the Atheros AR933x SoCs. The base clock frequency of the UART is passed to the driver via platform data. The SoC support code implements the generic clock API, and the clock rate can be retrieved via that. Update the code to get the clock rate via the generic clock API instead of using the platform data. Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index f136248..3c598e3 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1402,7 +1402,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE config SERIAL_AR933X bool "AR933X serial port support" - depends on SOC_AR933X + depends on HAVE_CLK && SOC_AR933X select SERIAL_CORE help If you have an Atheros AR933X SOC based board and want to use the diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 78be13a..1052ee0 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -24,11 +24,11 @@ #include #include #include +#include #include #include -#include #define DRIVER_NAME "ar933x-uart" @@ -47,6 +47,7 @@ struct ar933x_uart_port { unsigned int ier; /* shadow Interrupt Enable Register */ unsigned int min_baud; unsigned int max_baud; + struct clk *clk; }; static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, @@ -622,7 +623,6 @@ static struct uart_driver ar933x_uart_driver = { static int ar933x_uart_probe(struct platform_device *pdev) { - struct ar933x_uart_platform_data *pdata; struct ar933x_uart_port *up; struct uart_port *port; struct resource *mem_res; @@ -631,10 +631,6 @@ static int ar933x_uart_probe(struct platform_device *pdev) int id; int ret; - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) - return -EINVAL; - id = pdev->id; if (id == -1) id = 0; @@ -653,6 +649,12 @@ static int ar933x_uart_probe(struct platform_device *pdev) if (!up) return -ENOMEM; + up->clk = devm_clk_get(&pdev->dev, "uart"); + if (IS_ERR(up->clk)) { + dev_err(&pdev->dev, "unable to get UART clock\n"); + return PTR_ERR(up->clk); + } + port = &up->port; mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -660,13 +662,22 @@ static int ar933x_uart_probe(struct platform_device *pdev) if (IS_ERR(port->membase)) return PTR_ERR(port->membase); + ret = clk_prepare_enable(up->clk); + if (ret) + return ret; + + port->uartclk = clk_get_rate(up->clk); + if (!port->uartclk) { + ret = -EINVAL; + goto err_disable_clk; + } + port->mapbase = mem_res->start; port->line = id; port->irq = irq_res->start; port->dev = &pdev->dev; port->type = PORT_AR933X; port->iotype = UPIO_MEM32; - port->uartclk = pdata->uartclk; port->regshift = 2; port->fifosize = AR933X_UART_FIFO_SIZE; @@ -682,10 +693,14 @@ static int ar933x_uart_probe(struct platform_device *pdev) ret = uart_add_one_port(&ar933x_uart_driver, &up->port); if (ret) - return ret; + goto err_disable_clk; platform_set_drvdata(pdev, up); return 0; + +err_disable_clk: + clk_disable_unprepare(up->clk); + return ret; } static int ar933x_uart_remove(struct platform_device *pdev) @@ -694,8 +709,10 @@ static int ar933x_uart_remove(struct platform_device *pdev) up = platform_get_drvdata(pdev); - if (up) + if (up) { uart_remove_one_port(&ar933x_uart_driver, &up->port); + clk_disable_unprepare(up->clk); + } return 0; } -- cgit v0.10.2 From 0710e5626f524a26fe5992adb91a6289b2139928 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 28 Aug 2013 14:21:10 +0200 Subject: tty: ar933x_uart: remove superfluous assignment of ar933x_uart_driver.nr The 'nr' field of the 'ar933x_uart_driver' structure is already initialized with the same value in the static declaration. Remove the superfluous assignment in the module init routine. Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 1052ee0..2d83a45 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -730,7 +730,6 @@ static int __init ar933x_uart_init(void) { int ret; - ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS; ret = uart_register_driver(&ar933x_uart_driver); if (ret) goto err_out; -- cgit v0.10.2 From 124155351331a53feb00d10874f0c620405fd385 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 28 Aug 2013 17:08:39 +0200 Subject: tty: ar933x_uart: use config_enabled() macro to clean up ifdefs Add a new ar933x_uart_console_enabled() helper function which uses the config_enable(CONFIG_SERIAL_AR933X_CONSOLE) macro to decide if the console support is enabled or not. Remove the 'ifdef CONFIG_SERIAL_AR933X_CONSOLE' statements and use the new helper function to conditionally enable console support instead. If CONFIG_SERIAL_AR933X_CONSOLE is not enabled, the new helper function will become a null stub which allows the compiler to optimize out the unused console specific functions/variables. Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 2d83a45..0437a9e 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -50,6 +50,11 @@ struct ar933x_uart_port { struct clk *clk; }; +static inline bool ar933x_uart_console_enabled(void) +{ + return config_enabled(CONFIG_SERIAL_AR933X_CONSOLE); +} + static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, int offset) { @@ -500,8 +505,6 @@ static struct uart_ops ar933x_uart_ops = { .verify_port = ar933x_uart_verify_port, }; -#ifdef CONFIG_SERIAL_AR933X_CONSOLE - static struct ar933x_uart_port * ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; @@ -600,25 +603,18 @@ static struct console ar933x_uart_console = { static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) { + if (!ar933x_uart_console_enabled()) + return; + ar933x_console_ports[up->port.line] = up; } -#define AR933X_SERIAL_CONSOLE (&ar933x_uart_console) - -#else - -static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {} - -#define AR933X_SERIAL_CONSOLE NULL - -#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ - static struct uart_driver ar933x_uart_driver = { .owner = THIS_MODULE, .driver_name = DRIVER_NAME, .dev_name = "ttyATH", .nr = CONFIG_SERIAL_AR933X_NR_UARTS, - .cons = AR933X_SERIAL_CONSOLE, + .cons = NULL, /* filled in runtime */ }; static int ar933x_uart_probe(struct platform_device *pdev) @@ -730,6 +726,9 @@ static int __init ar933x_uart_init(void) { int ret; + if (ar933x_uart_console_enabled()) + ar933x_uart_driver.cons = &ar933x_uart_console; + ret = uart_register_driver(&ar933x_uart_driver); if (ret) goto err_out; -- cgit v0.10.2 From 3e6648c9c812f11117590ef846b205abd0224699 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 28 Aug 2013 14:08:22 -0500 Subject: serial: fsl-imx-uart: Cleanup duplicate device tree binding We had two bindings for the same serial device, it looks like the one in tty/serial/fsl-imx-uart.txt is the more up to date one so go with it and merge a few things about the use/need for aliases in from serial/fsl-imx-uart.txt. Signed-off-by: Kumar Gala Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt deleted file mode 100644 index c58573b..0000000 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Freescale i.MX UART controller - -Required properties: -- compatible : should be "fsl,imx21-uart" -- reg : Address and length of the register set for the device -- interrupts : Should contain UART interrupt number - -Optional properties: -- fsl,uart-has-rtscts: indicate that RTS/CTS signals are used - -Note: Each uart controller should have an alias correctly numbered -in "aliases" node. - -Example: - -- From imx51.dtsi: -aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; -}; - -uart1: serial@73fbc000 { - compatible = "fsl,imx51-uart", "fsl,imx21-uart"; - reg = <0x73fbc000 0x4000>; - interrupts = <31>; - status = "disabled"; -} - -- From imx51-babbage.dts: -uart1: serial@73fbc000 { - fsl,uart-has-rtscts; - status = "okay"; -}; - diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt index c662eb3..35ae1fb 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt @@ -11,9 +11,16 @@ Optional properties: - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works is DCE mode by default. +Note: Each uart controller should have an alias correctly numbered +in "aliases" node. + Example: -serial@73fbc000 { +aliases { + serial0 = &uart1; +}; + +uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; -- cgit v0.10.2 From 6b9c1fa25a5c2a2a2d8fa1e2f8c2cc5d6d0c4a45 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 28 Aug 2013 14:08:23 -0500 Subject: serial: unify serial bindings into a single dir Move all bindings in bindings/tty/serial into bindings/serial so we only have one place dir with serial/uart related bindings in it. Signed-off-by: Kumar Gala Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt new file mode 100644 index 0000000..5cae2eb --- /dev/null +++ b/Documentation/devicetree/bindings/serial/arc-uart.txt @@ -0,0 +1,26 @@ +* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards + +Required properties: +- compatible : "snps,arc-uart" +- reg : offset and length of the register set for the device. +- interrupts : device interrupt +- clock-frequency : the input clock frequency for the UART +- current-speed : baud rate for UART + +e.g. + +arcuart0: serial@c0fc1000 { + compatible = "snps,arc-uart"; + reg = <0xc0fc1000 0x100>; + interrupts = <5>; + clock-frequency = <80000000>; + current-speed = <115200>; + status = "okay"; +}; + +Note: Each port should have an alias correctly numbered in "aliases" node. + +e.g. +aliases { + serial0 = &arcuart0; +}; diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt new file mode 100644 index 0000000..2191dcb --- /dev/null +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -0,0 +1,43 @@ +* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) + +Required properties: +- compatible: Should be "atmel,-usart" + The compatible indicated will be the first SoC to support an + additional mode or an USART new feature. +- reg: Should contain registers location and length +- interrupts: Should contain interrupt + +Optional properties: +- atmel,use-dma-rx: use of PDC or DMA for receiving data +- atmel,use-dma-tx: use of PDC or DMA for transmitting data +- add dma bindings for dma transfer: + - dmas: DMA specifier, consisting of a phandle to DMA controller node, + memory peripheral interface and USART DMA channel ID, FIFO configuration. + Refer to dma.txt and atmel-dma.txt for details. + - dma-names: "rx" for RX channel, "tx" for TX channel. + + compatible description: +- at91rm9200: legacy USART support +- at91sam9260: generic USART implementation for SAM9 SoCs + +Example: +- use PDC: + usart0: serial@fff8c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff8c000 0x4000>; + interrupts = <7>; + atmel,use-dma-rx; + atmel,use-dma-tx; + }; + +- use DMA: + usart0: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + interrupts = <12 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + dmas = <&dma0 2 0x3>, + <&dma0 2 0x204>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt new file mode 100644 index 0000000..8e080b8 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt @@ -0,0 +1,20 @@ +* Energymicro efm32 UART + +Required properties: +- compatible : Should be "efm32,uart" +- reg : Address and length of the register set +- interrupts : Should contain uart interrupt + +Optional properties: +- location : Decides the location of the USART I/O pins. + Allowed range : [0 .. 5] + Default: 0 + +Example: + +uart@0x4000c400 { + compatible = "efm32,uart"; + reg = <0x4000c400 0x400>; + interrupts = <15>; + location = <0>; +}; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt new file mode 100644 index 0000000..35ae1fb --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -0,0 +1,29 @@ +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) + +Required properties: +- compatible : Should be "fsl,-uart" +- reg : Address and length of the register set for the device +- interrupts : Should contain uart interrupt + +Optional properties: +- fsl,uart-has-rtscts : Indicate the uart has rts and cts +- fsl,irda-mode : Indicate the uart supports irda mode +- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works + is DCE mode by default. + +Note: Each uart controller should have an alias correctly numbered +in "aliases" node. + +Example: + +aliases { + serial0 = &uart1; +}; + +uart1: serial@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + fsl,uart-has-rtscts; + fsl,dte-mode; +}; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt new file mode 100644 index 0000000..6fd1dd1 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -0,0 +1,14 @@ +* Freescale low power universal asynchronous receiver/transmitter (lpuart) + +Required properties: +- compatible : Should be "fsl,-lpuart" +- reg : Address and length of the register set for the device +- interrupts : Should contain uart interrupt + +Example: + +uart0: serial@40027000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40027000 0x1000>; + interrupts = <0 61 0x00>; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt new file mode 100644 index 0000000..59a40f1 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt @@ -0,0 +1,37 @@ +* Freescale MXS Application UART (AUART) + +Required properties: +- compatible : Should be "fsl,-auart". The supported SoCs include + imx23 and imx28. +- reg : Address and length of the register set for the device +- interrupts : Should contain the auart interrupt numbers +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and AUART DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: "rx" for RX channel, "tx" for TX channel. + +Optional properties: +- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines, + it also means you enable the DMA support for this UART. + +Example: +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; +}; + +Note: Each auart port should have an alias correctly numbered in "aliases" +node. + +Example: + +aliases { + serial0 = &auart0; + serial1 = &auart1; + serial2 = &auart2; + serial3 = &auart3; + serial4 = &auart4; +}; diff --git a/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt new file mode 100644 index 0000000..0d439df --- /dev/null +++ b/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt @@ -0,0 +1,14 @@ +* NXP LPC32xx SoC High Speed UART + +Required properties: +- compatible: Should be "nxp,lpc3220-hsuart" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt + +Example: + + uart1: serial@40014000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40014000 0x1000>; + interrupts = <26 0>; + }; diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt new file mode 100644 index 0000000..1928a3e --- /dev/null +++ b/Documentation/devicetree/bindings/serial/of-serial.txt @@ -0,0 +1,49 @@ +* UART (Universal Asynchronous Receiver/Transmitter) + +Required properties: +- compatible : one of: + - "ns8250" + - "ns16450" + - "ns16550a" + - "ns16550" + - "ns16750" + - "ns16850" + - "nvidia,tegra20-uart" + - "nxp,lpc3220-uart" + - "ibm,qpace-nwp-serial" + - "altr,16550-FIFO32" + - "altr,16550-FIFO64" + - "altr,16550-FIFO128" + - "serial" if the port type is unknown. +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clock-frequency : the input clock frequency for the UART + or + clocks phandle to refer to the clk used as per Documentation/devicetree + /bindings/clock/clock-bindings.txt + +Optional properties: +- current-speed : the current active speed of the UART. +- reg-offset : offset to apply to the mapbase from the start of the registers. +- reg-shift : quantity to shift the register offsets by. +- reg-io-width : the size (in bytes) of the IO accesses that should be + performed on the device. There are some systems that require 32-bit + accesses to the UART (e.g. TI davinci). +- used-by-rtas : set to indicate that the port is in use by the OpenFirmware + RTAS and should not be registered. +- no-loopback-test: set to indicate that the port does not implements loopback + test mode +- fifo-size: the fifo size of the UART. +- auto-flow-control: one way to enable automatic flow control support. The + driver is allowed to detect support for the capability even without this + property. + +Example: + + uart@80230000 { + compatible = "ns8250"; + reg = <0x80230000 0x100>; + clock-frequency = <3686400>; + interrupts = <10>; + reg-shift = <2>; + }; diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt new file mode 100644 index 0000000..a2dfc65 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -0,0 +1,33 @@ +* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter * + +Required properties: +- compatible : Should be "sirf,prima2-uart" or "sirf, prima2-usp-uart" +- reg : Offset and length of the register set for the device +- interrupts : Should contain uart interrupt +- fifosize : Should define hardware rx/tx fifo size +- clocks : Should contain uart clock number + +Optional properties: +- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware +- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true +- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true + +Example: + +uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x1000>; + interrupts = <17>; + fifosize = <128>; + clocks = <&clks 13>; +}; + +On the board-specific dts, we can put rts-gpios and cts-gpios like + +usp@b0090000 { + compatible = "sirf,prima2-usp-uart"; + sirf,uart-has-rtscts; + rts-gpios = <&gpio 15 0>; + cts-gpios = <&gpio 46 0>; +}; diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt new file mode 100644 index 0000000..f13f1c5 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt @@ -0,0 +1,25 @@ +* Synopsys DesignWare ABP UART + +Required properties: +- compatible : "snps,dw-apb-uart" +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clock-frequency : the input clock frequency for the UART. + +Optional properties: +- reg-shift : quantity to shift the register offsets by. If this property is + not present then the register offsets are not shifted. +- reg-io-width : the size (in bytes) of the IO accesses that should be + performed on the device. If this property is not present then single byte + accesses are used. + +Example: + + uart@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clock-frequency = <3686400>; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + }; diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt new file mode 100644 index 0000000..75d877f --- /dev/null +++ b/Documentation/devicetree/bindings/serial/st-asc.txt @@ -0,0 +1,18 @@ +*st-asc(Serial Port) + +Required properties: +- compatible : Should be "st,asc". +- reg, reg-names, interrupts, interrupt-names : Standard way to define device + resources with names. look in + Documentation/devicetree/bindings/resource-names.txt + +Optional properties: +- st,hw-flow-ctrl bool flag to enable hardware flow control. +- st,force-m1 bool flat to force asc to be in Mode-1 recommeded + for high bit rates (above 19.2K) +Example: +serial@fe440000{ + compatible = "st,asc"; + reg = <0xfe440000 0x2c>; + interrupts = <0 209 0>; +}; diff --git a/Documentation/devicetree/bindings/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/serial/via,vt8500-uart.txt new file mode 100644 index 0000000..5feef1e --- /dev/null +++ b/Documentation/devicetree/bindings/serial/via,vt8500-uart.txt @@ -0,0 +1,17 @@ +VIA/Wondermedia VT8500 UART Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-uart" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UART interrupt +- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock) + +Example: + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/arc-uart.txt b/Documentation/devicetree/bindings/tty/serial/arc-uart.txt deleted file mode 100644 index 5cae2eb..0000000 --- a/Documentation/devicetree/bindings/tty/serial/arc-uart.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards - -Required properties: -- compatible : "snps,arc-uart" -- reg : offset and length of the register set for the device. -- interrupts : device interrupt -- clock-frequency : the input clock frequency for the UART -- current-speed : baud rate for UART - -e.g. - -arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupts = <5>; - clock-frequency = <80000000>; - current-speed = <115200>; - status = "okay"; -}; - -Note: Each port should have an alias correctly numbered in "aliases" node. - -e.g. -aliases { - serial0 = &arcuart0; -}; diff --git a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt deleted file mode 100644 index 2191dcb..0000000 --- a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) - -Required properties: -- compatible: Should be "atmel,-usart" - The compatible indicated will be the first SoC to support an - additional mode or an USART new feature. -- reg: Should contain registers location and length -- interrupts: Should contain interrupt - -Optional properties: -- atmel,use-dma-rx: use of PDC or DMA for receiving data -- atmel,use-dma-tx: use of PDC or DMA for transmitting data -- add dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "rx" for RX channel, "tx" for TX channel. - - compatible description: -- at91rm9200: legacy USART support -- at91sam9260: generic USART implementation for SAM9 SoCs - -Example: -- use PDC: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - atmel,use-dma-rx; - atmel,use-dma-tx; - }; - -- use DMA: - usart0: serial@f001c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; - dmas = <&dma0 2 0x3>, - <&dma0 2 0x204>; - dma-names = "tx", "rx"; - }; diff --git a/Documentation/devicetree/bindings/tty/serial/efm32-uart.txt b/Documentation/devicetree/bindings/tty/serial/efm32-uart.txt deleted file mode 100644 index 8e080b8..0000000 --- a/Documentation/devicetree/bindings/tty/serial/efm32-uart.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Energymicro efm32 UART - -Required properties: -- compatible : Should be "efm32,uart" -- reg : Address and length of the register set -- interrupts : Should contain uart interrupt - -Optional properties: -- location : Decides the location of the USART I/O pins. - Allowed range : [0 .. 5] - Default: 0 - -Example: - -uart@0x4000c400 { - compatible = "efm32,uart"; - reg = <0x4000c400 0x400>; - interrupts = <15>; - location = <0>; -}; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt deleted file mode 100644 index 35ae1fb..0000000 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) - -Required properties: -- compatible : Should be "fsl,-uart" -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Optional properties: -- fsl,uart-has-rtscts : Indicate the uart has rts and cts -- fsl,irda-mode : Indicate the uart supports irda mode -- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works - is DCE mode by default. - -Note: Each uart controller should have an alias correctly numbered -in "aliases" node. - -Example: - -aliases { - serial0 = &uart1; -}; - -uart1: serial@73fbc000 { - compatible = "fsl,imx51-uart", "fsl,imx21-uart"; - reg = <0x73fbc000 0x4000>; - interrupts = <31>; - fsl,uart-has-rtscts; - fsl,dte-mode; -}; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt deleted file mode 100644 index 6fd1dd1..0000000 --- a/Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Freescale low power universal asynchronous receiver/transmitter (lpuart) - -Required properties: -- compatible : Should be "fsl,-lpuart" -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Example: - -uart0: serial@40027000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40027000 0x1000>; - interrupts = <0 61 0x00>; - }; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt deleted file mode 100644 index 59a40f1..0000000 --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Freescale MXS Application UART (AUART) - -Required properties: -- compatible : Should be "fsl,-auart". The supported SoCs include - imx23 and imx28. -- reg : Address and length of the register set for the device -- interrupts : Should contain the auart interrupt numbers -- dmas: DMA specifier, consisting of a phandle to DMA controller node - and AUART DMA channel ID. - Refer to dma.txt and fsl-mxs-dma.txt for details. -- dma-names: "rx" for RX channel, "tx" for TX channel. - -Optional properties: -- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines, - it also means you enable the DMA support for this UART. - -Example: -auart0: serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112>; - dmas = <&dma_apbx 8>, <&dma_apbx 9>; - dma-names = "rx", "tx"; -}; - -Note: Each auart port should have an alias correctly numbered in "aliases" -node. - -Example: - -aliases { - serial0 = &auart0; - serial1 = &auart1; - serial2 = &auart2; - serial3 = &auart3; - serial4 = &auart4; -}; diff --git a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt deleted file mode 100644 index 0d439df..0000000 --- a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt +++ /dev/null @@ -1,14 +0,0 @@ -* NXP LPC32xx SoC High Speed UART - -Required properties: -- compatible: Should be "nxp,lpc3220-hsuart" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt - -Example: - - uart1: serial@40014000 { - compatible = "nxp,lpc3220-hsuart"; - reg = <0x40014000 0x1000>; - interrupts = <26 0>; - }; diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt deleted file mode 100644 index 1928a3e..0000000 --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ /dev/null @@ -1,49 +0,0 @@ -* UART (Universal Asynchronous Receiver/Transmitter) - -Required properties: -- compatible : one of: - - "ns8250" - - "ns16450" - - "ns16550a" - - "ns16550" - - "ns16750" - - "ns16850" - - "nvidia,tegra20-uart" - - "nxp,lpc3220-uart" - - "ibm,qpace-nwp-serial" - - "altr,16550-FIFO32" - - "altr,16550-FIFO64" - - "altr,16550-FIFO128" - - "serial" if the port type is unknown. -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clock-frequency : the input clock frequency for the UART - or - clocks phandle to refer to the clk used as per Documentation/devicetree - /bindings/clock/clock-bindings.txt - -Optional properties: -- current-speed : the current active speed of the UART. -- reg-offset : offset to apply to the mapbase from the start of the registers. -- reg-shift : quantity to shift the register offsets by. -- reg-io-width : the size (in bytes) of the IO accesses that should be - performed on the device. There are some systems that require 32-bit - accesses to the UART (e.g. TI davinci). -- used-by-rtas : set to indicate that the port is in use by the OpenFirmware - RTAS and should not be registered. -- no-loopback-test: set to indicate that the port does not implements loopback - test mode -- fifo-size: the fifo size of the UART. -- auto-flow-control: one way to enable automatic flow control support. The - driver is allowed to detect support for the capability even without this - property. - -Example: - - uart@80230000 { - compatible = "ns8250"; - reg = <0x80230000 0x100>; - clock-frequency = <3686400>; - interrupts = <10>; - reg-shift = <2>; - }; diff --git a/Documentation/devicetree/bindings/tty/serial/sirf-uart.txt b/Documentation/devicetree/bindings/tty/serial/sirf-uart.txt deleted file mode 100644 index a2dfc65..0000000 --- a/Documentation/devicetree/bindings/tty/serial/sirf-uart.txt +++ /dev/null @@ -1,33 +0,0 @@ -* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter * - -Required properties: -- compatible : Should be "sirf,prima2-uart" or "sirf, prima2-usp-uart" -- reg : Offset and length of the register set for the device -- interrupts : Should contain uart interrupt -- fifosize : Should define hardware rx/tx fifo size -- clocks : Should contain uart clock number - -Optional properties: -- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware -- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true -- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true - -Example: - -uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x1000>; - interrupts = <17>; - fifosize = <128>; - clocks = <&clks 13>; -}; - -On the board-specific dts, we can put rts-gpios and cts-gpios like - -usp@b0090000 { - compatible = "sirf,prima2-usp-uart"; - sirf,uart-has-rtscts; - rts-gpios = <&gpio 15 0>; - cts-gpios = <&gpio 46 0>; -}; diff --git a/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt deleted file mode 100644 index f13f1c5..0000000 --- a/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Synopsys DesignWare ABP UART - -Required properties: -- compatible : "snps,dw-apb-uart" -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clock-frequency : the input clock frequency for the UART. - -Optional properties: -- reg-shift : quantity to shift the register offsets by. If this property is - not present then the register offsets are not shifted. -- reg-io-width : the size (in bytes) of the IO accesses that should be - performed on the device. If this property is not present then single byte - accesses are used. - -Example: - - uart@80230000 { - compatible = "snps,dw-apb-uart"; - reg = <0x80230000 0x100>; - clock-frequency = <3686400>; - interrupts = <10>; - reg-shift = <2>; - reg-io-width = <4>; - }; diff --git a/Documentation/devicetree/bindings/tty/serial/st-asc.txt b/Documentation/devicetree/bindings/tty/serial/st-asc.txt deleted file mode 100644 index 75d877f..0000000 --- a/Documentation/devicetree/bindings/tty/serial/st-asc.txt +++ /dev/null @@ -1,18 +0,0 @@ -*st-asc(Serial Port) - -Required properties: -- compatible : Should be "st,asc". -- reg, reg-names, interrupts, interrupt-names : Standard way to define device - resources with names. look in - Documentation/devicetree/bindings/resource-names.txt - -Optional properties: -- st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommeded - for high bit rates (above 19.2K) -Example: -serial@fe440000{ - compatible = "st,asc"; - reg = <0xfe440000 0x2c>; - interrupts = <0 209 0>; -}; diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt deleted file mode 100644 index 5feef1e..0000000 --- a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt +++ /dev/null @@ -1,17 +0,0 @@ -VIA/Wondermedia VT8500 UART Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-uart" -- reg : Should contain 1 register ranges(address and length) -- interrupts : UART interrupt -- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock) - -Example: - - uart@d8210000 { - compatible = "via,vt8500-uart"; - reg = <0xd8210000 0x1040>; - interrupts = <47>; - clocks = <&ref24>; - }; -- cgit v0.10.2 From 6e01365c469f3cfe96a1b428bade1a3628896929 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 28 Aug 2013 13:32:40 -0700 Subject: devicetree: serial: Document msm_serial bindings Let's fix up the msm serial device bindings so that it's clearer what hardware is supported. Instead of using hsuart (for high speed uart) let's use uartdm because that matches the actual name of the hardware. Also, let's add the version information in case we need to differentiate between different versions of the hardware in the future. Finally, lets specify that clocks are required (the clock bindings didn't exist when the original binding was written) and also specify dma bindings just in case we want to use it in software. We split the binding into two files to make it clearer what's required and not required. Cc: David Brown Cc: Acked-by: Kumar Gala Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt new file mode 100644 index 0000000..ce8c901 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt @@ -0,0 +1,25 @@ +* MSM Serial UART + +The MSM serial UART hardware is designed for low-speed use cases where a +dma-engine isn't needed. From a software perspective it's mostly compatible +with the MSM serial UARTDM except that it only supports reading and writing one +character at a time. + +Required properties: +- compatible: Should contain "qcom,msm-uart" +- reg: Should contain UART register location and length. +- interrupts: Should contain UART interrupt. +- clocks: Should contain the core clock. +- clock-names: Should be "core". + +Example: + +A uart device at 0xa9c00000 with interrupt 11. + +serial@a9c00000 { + compatible = "qcom,msm-uart"; + reg = <0xa9c00000 0x1000>; + interrupts = <11>; + clocks = <&uart_cxc>; + clock-names = "core"; +}; diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt new file mode 100644 index 0000000..ffa5b78 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -0,0 +1,53 @@ +* MSM Serial UARTDM + +The MSM serial UARTDM hardware is designed for high-speed use cases where the +transmit and/or receive channels can be offloaded to a dma-engine. From a +software perspective it's mostly compatible with the MSM serial UART except +that it supports reading and writing multiple characters at a time. + +Required properties: +- compatible: Should contain at least "qcom,msm-uartdm". + A more specific property should be specified as follows depending + on the version: + "qcom,msm-uartdm-v1.1" + "qcom,msm-uartdm-v1.2" + "qcom,msm-uartdm-v1.3" + "qcom,msm-uartdm-v1.4" +- reg: Should contain UART register locations and lengths. The first + register shall specify the main control registers. An optional second + register location shall specify the GSBI control region. + "qcom,msm-uartdm-v1.3" is the only compatible value that might + need the GSBI control region. +- interrupts: Should contain UART interrupt. +- clocks: Should contain the core clock and the AHB clock. +- clock-names: Should be "core" for the core clock and "iface" for the + AHB clock. + +Optional properties: +- dmas: Should contain dma specifiers for transmit and receive channels +- dma-names: Should contain "tx" for transmit and "rx" for receive channels + +Examples: + +A uartdm v1.4 device with dma capabilities. + +serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <0 108 0x0>; + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; + clock-names = "core", "iface"; + dmas = <&dma0 0>, <&dma0 1>; + dma-names = "tx", "rx"; +}; + +A uartdm v1.3 device without dma capabilities and part of a GSBI complex. + +serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>; + clock-names = "core", "iface"; +}; diff --git a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt deleted file mode 100644 index aef383e..0000000 --- a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Qualcomm MSM UART - -Required properties: -- compatible : - - "qcom,msm-uart", and one of "qcom,msm-hsuart" or - "qcom,msm-lsuart". -- reg : offset and length of the register set for the device - for the hsuart operating in compatible mode, there should be a - second pair describing the gsbi registers. -- interrupts : should contain the uart interrupt. - -There are two different UART blocks used in MSM devices, -"qcom,msm-hsuart" and "qcom,msm-lsuart". The msm-serial driver is -able to handle both of these, and matches against the "qcom,msm-uart" -as the compatibility. - -The registers for the "qcom,msm-hsuart" device need to specify both -register blocks, even for the common driver. - -Example: - - uart@19c400000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <195>; - }; -- cgit v0.10.2 From 9dfe59f15195b8c5bd4c2950266877c51fc329f0 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 28 Aug 2013 13:32:41 -0700 Subject: ARM: dts: msm: Update uartdm compatible strings Let's follow the ratified DT binding and use uartdm instead of hsuart. This does break backwards compatibility but this shouldn't be a problem because the uart driver isn't probing on these devices without adding clock support (which isn't merged so far). Cc: David Brown Acked-by: Kumar Gala Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index cdc010e..386d428 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -38,7 +38,7 @@ }; serial@19c40000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; interrupts = <0 195 0x0>; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index db2060c..532050b 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -38,7 +38,7 @@ }; serial@16440000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; interrupts = <0 154 0x0>; -- cgit v0.10.2 From 284301ef7c4e5aad2bcb81be5525e4bfc0ba3e31 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 29 Aug 2013 11:37:19 +0200 Subject: tty: ar933x_uart: allow to build the driver as a module Change the SERIAL_AR933X Kconfig option from 'bool' to 'tristate' in order to allow to build the driver as a module. Also extend the help text of the option to reflect that. Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 3c598e3..cc4c868 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1401,13 +1401,16 @@ config SERIAL_XILINX_PS_UART_CONSOLE Enable a Xilinx PS UART port to be the system console. config SERIAL_AR933X - bool "AR933X serial port support" + tristate "AR933X serial port support" depends on HAVE_CLK && SOC_AR933X select SERIAL_CORE help If you have an Atheros AR933X SOC based board and want to use the built-in UART of the SoC, say Y to this option. + To compile this driver as a module, choose M here: the + module will be called ar933x_uart. + config SERIAL_AR933X_CONSOLE bool "Console on AR933X serial port" depends on SERIAL_AR933X=y -- cgit v0.10.2 From dd910d98a2e240443db0090b0ae8a719a4a460f8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 29 Aug 2013 08:44:01 +0200 Subject: tty: ar933x_uart: add device tree support and binding documentation Modify the probe routine to get the port line number from device tree if the 'of_node' is populated in the platform device. The driver can be built as module, thus add an OF specific module device table as well to support module auto loading. This makes it possible to use the driver for AR9330 UART devices specified in device tree. Cc: devicetree@vger.kernel.org Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt new file mode 100644 index 0000000..c5e032c --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt @@ -0,0 +1,34 @@ +* Qualcomm Atheros AR9330 High-Speed UART + +Required properties: + +- compatible: Must be "qca,ar9330-uart" + +- reg: Specifies the physical base address of the controller and + the length of the memory mapped region. + +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this device. + +- interrupts: Specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. + +Additional requirements: + + Each UART port must have an alias correctly numbered in "aliases" + node. + +Example: + + aliases { + serial0 = &uart0; + }; + + uart0: uart@18020000 { + compatible = "qca,ar9330-uart"; + reg = <0x18020000 0x14>; + + interrupt-parent = <&intc>; + interrupts = <3>; + }; diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 0437a9e..acd03af 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -17,6 +17,8 @@ #include #include #include +#include +#include #include #include #include @@ -623,13 +625,24 @@ static int ar933x_uart_probe(struct platform_device *pdev) struct uart_port *port; struct resource *mem_res; struct resource *irq_res; + struct device_node *np; unsigned int baud; int id; int ret; - id = pdev->id; - if (id == -1) - id = 0; + np = pdev->dev.of_node; + if (config_enabled(CONFIG_OF) && np) { + id = of_alias_get_id(np, "serial"); + if (id < 0) { + dev_err(&pdev->dev, "unable to get alias id, err=%d\n", + id); + return id; + } + } else { + id = pdev->id; + if (id == -1) + id = 0; + } if (id > CONFIG_SERIAL_AR933X_NR_UARTS) return -EINVAL; @@ -713,12 +726,21 @@ static int ar933x_uart_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id ar933x_uart_of_ids[] = { + { .compatible = "qca,ar9330-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids); +#endif + static struct platform_driver ar933x_uart_platform_driver = { .probe = ar933x_uart_probe, .remove = ar933x_uart_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ar933x_uart_of_ids), }, }; -- cgit v0.10.2 From b09c74ae1263ea63b63dd65e6b6500686a3a5fe3 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Thu, 29 Aug 2013 16:29:25 +0800 Subject: serial: imx: initialize the local variable The slave_config is not initialized, so some of its fields may be set with random data which may causes the failure in the following dmaengine_prep_slave_sg(). This patch fixes this issue. Signed-off-by: Huang Shijie Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 2c13155..a0ebbc9 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -979,7 +979,7 @@ static void imx_uart_dma_exit(struct imx_port *sport) static int imx_uart_dma_init(struct imx_port *sport) { - struct dma_slave_config slave_config; + struct dma_slave_config slave_config = {}; struct device *dev = sport->port.dev; int ret; -- cgit v0.10.2 From 2d1d3f3ae985ec5676fb56ff2c7acad2e1c4e6eb Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 29 Aug 2013 14:08:18 -0700 Subject: hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc kzalloc already adds this __GFP_ZERO. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 682210d..e61c36c 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -208,7 +208,7 @@ static int xen_hvm_console_init(void) info = vtermno_to_xencons(HVC_COOKIE); if (!info) { - info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL); if (!info) return -ENOMEM; } else if (info->intf != NULL) { @@ -257,7 +257,7 @@ static int xen_pv_console_init(void) info = vtermno_to_xencons(HVC_COOKIE); if (!info) { - info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL); if (!info) return -ENOMEM; } else if (info->intf != NULL) { @@ -284,7 +284,7 @@ static int xen_initial_domain_console_init(void) info = vtermno_to_xencons(HVC_COOKIE); if (!info) { - info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL); if (!info) return -ENOMEM; } -- cgit v0.10.2