From 925e64c3c512e9f4452eaa7d52fd4c1518b8fb11 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 May 2012 15:27:20 +0200 Subject: mac80211: run scan after finish connection monitoring commit 133d40f9a22bdfd2617a446f1e3209537c5415ec Author: Stanislaw Gruszka Date: Wed Mar 28 16:01:19 2012 +0200 mac80211: do not scan and monitor connection in parallel add bug, which make possible to start a scan and never finish it, so make every new scanning request finish with -EBUSY error. This can happen on code paths where we finish connection monitoring and clear IEEE80211_STA_*_POLL flags, but do not check if scan was deferred. This patch fixes those code paths. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 04c3063..d94627c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1220,6 +1220,22 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local, sdata->vif.bss_conf.qos = true; } +static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) +{ + lockdep_assert_held(&sdata->local->mtx); + + sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | + IEEE80211_STA_BEACON_POLL); + ieee80211_run_deferred_scan(sdata->local); +} + +static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) +{ + mutex_lock(&sdata->local->mtx); + __ieee80211_stop_poll(sdata); + mutex_unlock(&sdata->local->mtx); +} + static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, u16 capab, bool erp_valid, u8 erp) { @@ -1285,8 +1301,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE; /* just to be sure */ - sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | - IEEE80211_STA_BEACON_POLL); + ieee80211_stop_poll(sdata); ieee80211_led_assoc(local, 1); @@ -1456,8 +1471,7 @@ static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) return; } - ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL | - IEEE80211_STA_BEACON_POLL); + __ieee80211_stop_poll(sdata); mutex_lock(&local->iflist_mtx); ieee80211_recalc_ps(local, -1); @@ -1477,7 +1491,6 @@ static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); out: - ieee80211_run_deferred_scan(local); mutex_unlock(&local->mtx); } @@ -2408,7 +2421,11 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n", sdata->name); #endif + mutex_lock(&local->mtx); ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; + ieee80211_run_deferred_scan(local); + mutex_unlock(&local->mtx); + mutex_lock(&local->iflist_mtx); ieee80211_recalc_ps(local, -1); mutex_unlock(&local->iflist_mtx); @@ -2595,8 +2612,7 @@ static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[DEAUTH_DISASSOC_LEN]; - ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL | - IEEE80211_STA_BEACON_POLL); + ieee80211_stop_poll(sdata); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, false, frame_buf); @@ -2874,8 +2890,7 @@ static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) u32 flags; if (sdata->vif.type == NL80211_IFTYPE_STATION) { - sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL | - IEEE80211_STA_CONNECTION_POLL); + __ieee80211_stop_poll(sdata); /* let's probe the connection once */ flags = sdata->local->hw.flags; @@ -2944,7 +2959,10 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running)) add_timer(&ifmgd->chswitch_timer); ieee80211_sta_reset_beacon_monitor(sdata); + + mutex_lock(&sdata->local->mtx); ieee80211_restart_sta_timer(sdata); + mutex_unlock(&sdata->local->mtx); } #endif -- cgit v0.10.2 From f0e3bd23418e1ec1aeac5fc36b74bf2f645b1244 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Tue, 29 May 2012 15:39:04 -0700 Subject: mwifiex: invalidate bss config before setting channel for uAP Mark bss_config parameters as invalid before setting AP channel. This prevents from setting invalid parameters while setting AP channel to FW. Signed-off-by: Avinash Patil Signed-off-by: Kiran Divekar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c index 76dfbc4..e9482c9 100644 --- a/drivers/net/wireless/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/mwifiex/uap_cmd.c @@ -416,6 +416,7 @@ int mwifiex_uap_set_channel(struct mwifiex_private *priv, int channel) if (!bss_cfg) return -ENOMEM; + mwifiex_set_sys_config_invalid_data(bss_cfg); bss_cfg->band_cfg = BAND_CONFIG_MANUAL; bss_cfg->channel = channel; -- cgit v0.10.2 From 7a1c99343c5305c47b5e078d1af2144f9026df40 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Tue, 29 May 2012 15:39:05 -0700 Subject: mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAP mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by: Avinash Patil Signed-off-by: Kiran Divekar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 8767144..015fec3 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -948,6 +948,19 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, bss_cfg->ssid.ssid_len = params->ssid_len; } + switch (params->hidden_ssid) { + case NL80211_HIDDEN_SSID_NOT_IN_USE: + bss_cfg->bcast_ssid_ctl = 1; + break; + case NL80211_HIDDEN_SSID_ZERO_LEN: + bss_cfg->bcast_ssid_ctl = 0; + break; + case NL80211_HIDDEN_SSID_ZERO_CONTENTS: + /* firmware doesn't support this type of hidden SSID */ + default: + return -EINVAL; + } + if (mwifiex_set_secure_params(priv, bss_cfg, params)) { kfree(bss_cfg); wiphy_err(wiphy, "Failed to parse secuirty parameters!\n"); diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index 9f674bb..561452a 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -122,6 +122,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER { #define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42) #define TLV_TYPE_UAP_BEACON_PERIOD (PROPRIETARY_TLV_BASE_ID + 44) #define TLV_TYPE_UAP_DTIM_PERIOD (PROPRIETARY_TLV_BASE_ID + 45) +#define TLV_TYPE_UAP_BCAST_SSID (PROPRIETARY_TLV_BASE_ID + 48) #define TLV_TYPE_UAP_RTS_THRESHOLD (PROPRIETARY_TLV_BASE_ID + 51) #define TLV_TYPE_UAP_WPA_PASSPHRASE (PROPRIETARY_TLV_BASE_ID + 60) #define TLV_TYPE_UAP_ENCRY_PROTOCOL (PROPRIETARY_TLV_BASE_ID + 64) @@ -1209,6 +1210,11 @@ struct host_cmd_tlv_ssid { u8 ssid[0]; } __packed; +struct host_cmd_tlv_bcast_ssid { + struct host_cmd_tlv tlv; + u8 bcast_ctl; +} __packed; + struct host_cmd_tlv_beacon_period { struct host_cmd_tlv tlv; __le16 period; diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c index e9482c9..8173ab6 100644 --- a/drivers/net/wireless/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/mwifiex/uap_cmd.c @@ -132,6 +132,7 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) struct host_cmd_tlv_dtim_period *dtim_period; struct host_cmd_tlv_beacon_period *beacon_period; struct host_cmd_tlv_ssid *ssid; + struct host_cmd_tlv_bcast_ssid *bcast_ssid; struct host_cmd_tlv_channel_band *chan_band; struct host_cmd_tlv_frag_threshold *frag_threshold; struct host_cmd_tlv_rts_threshold *rts_threshold; @@ -153,6 +154,14 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) cmd_size += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len; tlv += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len; + + bcast_ssid = (struct host_cmd_tlv_bcast_ssid *)tlv; + bcast_ssid->tlv.type = cpu_to_le16(TLV_TYPE_UAP_BCAST_SSID); + bcast_ssid->tlv.len = + cpu_to_le16(sizeof(bcast_ssid->bcast_ctl)); + bcast_ssid->bcast_ctl = bss_cfg->bcast_ssid_ctl; + cmd_size += sizeof(struct host_cmd_tlv_bcast_ssid); + tlv += sizeof(struct host_cmd_tlv_bcast_ssid); } if (bss_cfg->channel && bss_cfg->channel <= MAX_CHANNEL_BAND_BG) { chan_band = (struct host_cmd_tlv_channel_band *)tlv; -- cgit v0.10.2 From 28f333666ea766fdfb25de3783ff56cd2d1c51f0 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 29 May 2012 15:39:06 -0700 Subject: cfg80211: use sme_state in ibss start/join path CFG80211_DEV_WARN_ON() at "net/wireless/ibss.c line 63" is unnecessarily triggered even after successful connection, when cfg80211_ibss_joined() is called by driver inside .join_ibss handler. This patch fixes the problem by changing 'sme_state' in ibss path and having WARN_ON() check for 'sme_state' similar to infra association. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c index d2a19b0..89baa33 100644 --- a/net/wireless/ibss.c +++ b/net/wireless/ibss.c @@ -42,6 +42,7 @@ void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid) cfg80211_hold_bss(bss_from_pub(bss)); wdev->current_bss = bss_from_pub(bss); + wdev->sme_state = CFG80211_SME_CONNECTED; cfg80211_upload_connect_keys(wdev); nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid, @@ -60,7 +61,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp) struct cfg80211_event *ev; unsigned long flags; - CFG80211_DEV_WARN_ON(!wdev->ssid_len); + CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTING); ev = kzalloc(sizeof(*ev), gfp); if (!ev) @@ -115,9 +116,11 @@ int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev, #ifdef CONFIG_CFG80211_WEXT wdev->wext.ibss.channel = params->channel; #endif + wdev->sme_state = CFG80211_SME_CONNECTING; err = rdev->ops->join_ibss(&rdev->wiphy, dev, params); if (err) { wdev->connect_keys = NULL; + wdev->sme_state = CFG80211_SME_IDLE; return err; } @@ -169,6 +172,7 @@ static void __cfg80211_clear_ibss(struct net_device *dev, bool nowext) } wdev->current_bss = NULL; + wdev->sme_state = CFG80211_SME_IDLE; wdev->ssid_len = 0; #ifdef CONFIG_CFG80211_WEXT if (!nowext) -- cgit v0.10.2 From b8bacc187aa5b59af9b9fa19b3ce4df5ad1db112 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Wed, 30 May 2012 09:30:41 +0800 Subject: mac80211: Fix Unreachable Mesh Station Problem when joining to another MBSS Mesh station that joins an MBSS is reachable using mesh portal with 6 address frame by mesh stations from another MBSS if these two different MBSSes are bridged. However, if the mesh station later moves into the same MBSS of those mesh stations, it is unreachable by mesh stations in the MBSS due to the mpp_paths table is not deleted. A quick fix is to perform mesh_path_lookup, if it is available for the target destination, mpp_path_lookup is not performed. When the mesh station moves back to its original MBSS, the mesh_paths will be deleted once expired. So, it will be reachable using mpp_path_lookup again. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: John W. Linville diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 847215b..e453212 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1737,7 +1737,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, __le16 fc; struct ieee80211_hdr hdr; struct ieee80211s_hdr mesh_hdr __maybe_unused; - struct mesh_path __maybe_unused *mppath = NULL; + struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL; const u8 *encaps_data; int encaps_len, skip_header_bytes; int nh_pos, h_pos; @@ -1803,8 +1803,11 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, goto fail; } rcu_read_lock(); - if (!is_multicast_ether_addr(skb->data)) - mppath = mpp_path_lookup(skb->data, sdata); + if (!is_multicast_ether_addr(skb->data)) { + mpath = mesh_path_lookup(skb->data, sdata); + if (!mpath) + mppath = mpp_path_lookup(skb->data, sdata); + } /* * Use address extension if it is a packet from -- cgit v0.10.2 From a5fdde28b4f5fb756032e7ad2c6fcdcffde20958 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 May 2012 10:36:12 +0200 Subject: iwlwifi: fix TX power antenna access Since my commit iwlwifi: use valid TX/RX antenna from hw_params the config values are pure overrides, not the real values for all hardware. Therefore, the EEPROM TX power reading code checks the wrong values, it should check the hw_params values. Cc: stable@kernel.org [3.4] Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 50c5891..b8e2b22 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -568,28 +568,28 @@ static int iwl_find_otp_image(struct iwl_trans *trans, * iwl_get_max_txpower_avg - get the highest tx power from all chains. * find the highest tx power from all chains for the channel */ -static s8 iwl_get_max_txpower_avg(const struct iwl_cfg *cfg, +static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv, struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, int element, s8 *max_txpower_in_half_dbm) { s8 max_txpower_avg = 0; /* (dBm) */ /* Take the highest tx power from any valid chains */ - if ((cfg->valid_tx_ant & ANT_A) && + if ((priv->hw_params.valid_tx_ant & ANT_A) && (enhanced_txpower[element].chain_a_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].chain_a_max; - if ((cfg->valid_tx_ant & ANT_B) && + if ((priv->hw_params.valid_tx_ant & ANT_B) && (enhanced_txpower[element].chain_b_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].chain_b_max; - if ((cfg->valid_tx_ant & ANT_C) && + if ((priv->hw_params.valid_tx_ant & ANT_C) && (enhanced_txpower[element].chain_c_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].chain_c_max; - if (((cfg->valid_tx_ant == ANT_AB) | - (cfg->valid_tx_ant == ANT_BC) | - (cfg->valid_tx_ant == ANT_AC)) && + if (((priv->hw_params.valid_tx_ant == ANT_AB) | + (priv->hw_params.valid_tx_ant == ANT_BC) | + (priv->hw_params.valid_tx_ant == ANT_AC)) && (enhanced_txpower[element].mimo2_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].mimo2_max; - if ((cfg->valid_tx_ant == ANT_ABC) && + if ((priv->hw_params.valid_tx_ant == ANT_ABC) && (enhanced_txpower[element].mimo3_max > max_txpower_avg)) max_txpower_avg = enhanced_txpower[element].mimo3_max; @@ -691,7 +691,7 @@ static void iwl_eeprom_enhanced_txpower(struct iwl_priv *priv) ((txp->delta_20_in_40 & 0xf0) >> 4), (txp->delta_20_in_40 & 0x0f)); - max_txp_avg = iwl_get_max_txpower_avg(priv->cfg, txp_array, idx, + max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx, &max_txp_avg_halfdbm); /* -- cgit v0.10.2 From bd34ab62a3297bd7685da11b0cbe05ae4cd8b02c Mon Sep 17 00:00:00 2001 From: Meenakshi Venkataraman Date: Wed, 30 May 2012 11:39:33 +0200 Subject: mac80211: fix error in station state transitions during reconfig As part of hardware reconfig mac80211 tries to restore the station state to its values before the hardware reconfig, but it only goes to the last-state - 1. Fix this off-by-one error. Cc: stable@kernel.org [3.4] Signed-off-by: Meenakshi Venkataraman Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/util.c b/net/mac80211/util.c index a44c680..8dd4712 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1271,7 +1271,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) enum ieee80211_sta_state state; for (state = IEEE80211_STA_NOTEXIST; - state < sta->sta_state - 1; state++) + state < sta->sta_state; state++) WARN_ON(drv_sta_state(local, sta->sdata, sta, state, state + 1)); } -- cgit v0.10.2 From 1ae2fc25a1289a84ca726541e3356ba5bcb7f7fe Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 May 2012 14:59:36 +0200 Subject: mac80211_hwsim: advertise interface combinations Enforcing interface combinations broke uses of hwsim with multiple virtual interfaces. Advertise that all combinations are possible to fix this. Reported-by: Nirav Shah Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index fb787df..4c9336c 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1721,6 +1721,24 @@ static void hwsim_exit_netlink(void) "unregister family %i\n", ret); } +static const struct ieee80211_iface_limit hwsim_if_limits[] = { + { .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) }, + { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_GO) }, +}; + +static const struct ieee80211_iface_combination hwsim_if_comb = { + .limits = hwsim_if_limits, + .n_limits = ARRAY_SIZE(hwsim_if_limits), + .max_interfaces = 2048, + .num_different_channels = 1, +}; + static int __init init_mac80211_hwsim(void) { int i, err = 0; @@ -1782,6 +1800,9 @@ static int __init init_mac80211_hwsim(void) hw->wiphy->n_addresses = 2; hw->wiphy->addresses = data->addresses; + hw->wiphy->iface_combinations = &hwsim_if_comb; + hw->wiphy->n_iface_combinations = 1; + if (fake_hw_scan) { hw->wiphy->max_scan_ssids = 255; hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; -- cgit v0.10.2 From 71ecfa1893034eeb1c93e02e22ee2ad26d080858 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 31 May 2012 15:09:27 +0200 Subject: mac80211: clean up remain-on-channel on interface stop When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Cc: stable@kernel.org Reported-by: Nirav Shah Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index d4c19a7..8664111 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -637,6 +637,18 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, ieee80211_configure_filter(local); break; default: + mutex_lock(&local->mtx); + if (local->hw_roc_dev == sdata->dev && + local->hw_roc_channel) { + /* ignore return value since this is racy */ + drv_cancel_remain_on_channel(local); + ieee80211_queue_work(&local->hw, &local->hw_roc_done); + } + mutex_unlock(&local->mtx); + + flush_work(&local->hw_roc_start); + flush_work(&local->hw_roc_done); + flush_work(&sdata->work); /* * When we get here, the interface is marked down. diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index f054e94..935aa4b 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -234,6 +234,22 @@ static void ieee80211_hw_roc_done(struct work_struct *work) return; } + /* was never transmitted */ + if (local->hw_roc_skb) { + u64 cookie; + + cookie = local->hw_roc_cookie ^ 2; + + cfg80211_mgmt_tx_status(local->hw_roc_dev, cookie, + local->hw_roc_skb->data, + local->hw_roc_skb->len, false, + GFP_KERNEL); + + kfree_skb(local->hw_roc_skb); + local->hw_roc_skb = NULL; + local->hw_roc_skb_for_status = NULL; + } + if (!local->hw_roc_for_tx) cfg80211_remain_on_channel_expired(local->hw_roc_dev, local->hw_roc_cookie, -- cgit v0.10.2 From d8c7aae64cd2db5eccc631c29fa978a24fb1feef Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 30 May 2012 15:32:24 +0200 Subject: mac80211: add missing rcu_read_lock/unlock in agg-rx session timer Fixes a lockdep warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/mac80211/agg-rx.c:148 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 1 lock held by arecord/11226: #0: (&tid_agg_rx->session_timer){+.-...}, at: [] call_timer_fn+0x0/0x360 stack backtrace: Pid: 11226, comm: arecord Not tainted 3.1.0-kml #16 Call Trace: [] lockdep_rcu_dereference+0xa4/0xc0 [] sta_rx_agg_session_timer_expired+0xc9/0x110 [mac80211] [] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211] [] call_timer_fn+0x8a/0x360 [] ? init_timer_deferrable_key+0x30/0x30 [] ? _raw_spin_unlock_irq+0x30/0x70 [] run_timer_softirq+0x139/0x310 [] ? put_lock_stats.isra.25+0xe/0x40 [] ? lock_release_holdtime.part.26+0xdc/0x160 [] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211] [] __do_softirq+0xc8/0x3c0 [] ? tick_dev_program_event+0x48/0x110 [] ? tick_program_event+0x1f/0x30 [] ? putname+0x35/0x50 [] call_softirq+0x1c/0x30 [] do_softirq+0xa5/0xe0 [] irq_exit+0xae/0xe0 [] smp_apic_timer_interrupt+0x6b/0x98 [] apic_timer_interrupt+0x73/0x80 [] ? free_debug_processing+0x1a1/0x1d5 [] ? putname+0x35/0x50 [] __slab_free+0x31/0x2ca [] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [] ? __debug_check_no_obj_freed+0x15f/0x210 [] ? lock_release_nested+0x84/0xc0 [] ? kmem_cache_free+0x105/0x250 [] ? putname+0x35/0x50 [] ? putname+0x35/0x50 [] kmem_cache_free+0x23f/0x250 [] putname+0x35/0x50 [] do_sys_open+0x16d/0x1d0 [] sys_open+0x20/0x30 [] system_call_fastpath+0x16/0x1b Reported-by: Johannes Berg Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index 26ddb69..c649188 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -145,15 +145,20 @@ static void sta_rx_agg_session_timer_expired(unsigned long data) struct tid_ampdu_rx *tid_rx; unsigned long timeout; + rcu_read_lock(); tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[*ptid]); - if (!tid_rx) + if (!tid_rx) { + rcu_read_unlock(); return; + } timeout = tid_rx->last_rx + TU_TO_JIFFIES(tid_rx->timeout); if (time_is_after_jiffies(timeout)) { mod_timer(&tid_rx->session_timer, timeout); + rcu_read_unlock(); return; } + rcu_read_unlock(); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid); -- cgit v0.10.2 From 5204267d2fd5e98fc52b44fec01ad10352642b78 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 30 May 2012 13:25:54 -0700 Subject: mac80211: Fix likely misuse of | for & Using | with a constant is always true. Likely this should have be &. cc: Ben Greear Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 495831e..e9cecca 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -533,16 +533,16 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy, sinfo.filled = 0; sta_set_sinfo(sta, &sinfo); - if (sinfo.filled | STATION_INFO_TX_BITRATE) + if (sinfo.filled & STATION_INFO_TX_BITRATE) data[i] = 100000 * cfg80211_calculate_bitrate(&sinfo.txrate); i++; - if (sinfo.filled | STATION_INFO_RX_BITRATE) + if (sinfo.filled & STATION_INFO_RX_BITRATE) data[i] = 100000 * cfg80211_calculate_bitrate(&sinfo.rxrate); i++; - if (sinfo.filled | STATION_INFO_SIGNAL_AVG) + if (sinfo.filled & STATION_INFO_SIGNAL_AVG) data[i] = (u8)sinfo.signal_avg; i++; } else { -- cgit v0.10.2 From f304a993190965f48baa49792d5ab2849ae26bf9 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 30 May 2012 13:25:56 -0700 Subject: brcmfmac: Fix likely misuse of | for & Using | with a constant is always true. Likely this should have be &. Signed-off-by: Joe Perches Acked-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index e2480d1..8e7e692 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -89,9 +89,9 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); - /* redirect, configure ane enable io for interrupt signal */ + /* redirect, configure and enable io for interrupt signal */ data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; - if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH) + if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH) data |= SDIO_SEPINT_ACT_HI; brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); -- cgit v0.10.2 From e5851dac2c95af7159716832300b9f50c62c648e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 1 Jun 2012 11:29:40 +0200 Subject: rt2x00: use atomic variable for seqno Remove spinlock as atomic_t can be used instead. Note we use only 16 lower bits, upper bits are changed but we impilcilty cast to u16. This fix possible deadlock on IBSS mode reproted by lockdep: ================================= [ INFO: inconsistent lock state ] 3.4.0-wl+ #4 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/u:2/30374 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&intf->seqlock)->rlock){+.?...}, at: [] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] {IN-SOFTIRQ-W} state was registered at: [] __lock_acquire+0x47b/0x1050 [] lock_acquire+0x84/0xf0 [] _raw_spin_lock+0x33/0x40 [] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [] rt2x00queue_write_tx_frame+0x1a/0x300 [rt2x00lib] [] rt2x00mac_tx+0x7f/0x380 [rt2x00lib] [] __ieee80211_tx+0x1b3/0x300 [mac80211] [] ieee80211_tx+0x105/0x130 [mac80211] [] ieee80211_xmit+0xad/0x100 [mac80211] [] ieee80211_subif_start_xmit+0x2d9/0x930 [mac80211] [] dev_hard_start_xmit+0x307/0x660 [] sch_direct_xmit+0xa1/0x1e0 [] dev_queue_xmit+0x183/0x730 [] neigh_resolve_output+0xfa/0x1e0 [] ip_finish_output+0x24a/0x460 [] ip_output+0xb7/0x100 [] ip_local_out+0x20/0x60 [] igmpv3_sendpack+0x4f/0x60 [] igmp_ifc_timer_expire+0x29f/0x330 [] run_timer_softirq+0x15c/0x2f0 [] __do_softirq+0xae/0x1e0 irq event stamp: 18380437 hardirqs last enabled at (18380437): [] __slab_alloc.clone.3+0x67/0x5f0 hardirqs last disabled at (18380436): [] __slab_alloc.clone.3+0x33/0x5f0 softirqs last enabled at (18377616): [] __do_softirq+0x123/0x1e0 softirqs last disabled at (18377611): [] do_softirq+0x9d/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&intf->seqlock)->rlock); lock(&(&intf->seqlock)->rlock); *** DEADLOCK *** 4 locks held by kworker/u:2/30374: #0: (wiphy_name(local->hw.wiphy)){++++.+}, at: [] process_one_work+0x109/0x3f0 #1: ((&sdata->work)){+.+.+.}, at: [] process_one_work+0x109/0x3f0 #2: (&ifibss->mtx){+.+.+.}, at: [] ieee80211_ibss_work+0x1b/0x470 [mac80211] #3: (&intf->beacon_skb_mutex){+.+...}, at: [] rt2x00queue_update_beacon+0x24/0x50 [rt2x00lib] stack backtrace: Pid: 30374, comm: kworker/u:2 Not tainted 3.4.0-wl+ #4 Call Trace: [] print_usage_bug+0x1f6/0x220 [] mark_lock+0x2c2/0x300 [] ? check_usage_forwards+0xc0/0xc0 [] __lock_acquire+0x4bc/0x1050 [] ? __kmalloc_track_caller+0x1c0/0x1d0 [] ? copy_skb_header+0x26/0x90 [] lock_acquire+0x84/0xf0 [] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [] _raw_spin_lock+0x33/0x40 [] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [] rt2x00queue_update_beacon_locked+0x5f/0xb0 [rt2x00lib] [] rt2x00queue_update_beacon+0x2d/0x50 [rt2x00lib] [] rt2x00mac_bss_info_changed+0x1ca/0x200 [rt2x00lib] [] ? rt2x00mac_remove_interface+0x70/0x70 [rt2x00lib] [] ieee80211_bss_info_change_notify+0xe0/0x1d0 [mac80211] [] __ieee80211_sta_join_ibss+0x3b8/0x610 [mac80211] [] ? mark_held_locks+0x64/0xc0 [] ? virt_efi_query_capsule_caps+0x12/0x50 [] ieee80211_sta_join_ibss+0xf9/0x140 [mac80211] [] ieee80211_ibss_work+0x416/0x470 [mac80211] [] ? trace_hardirqs_on+0xb/0x10 [] ? skb_dequeue+0x4b/0x70 [] ieee80211_iface_work+0x13f/0x230 [mac80211] [] ? process_one_work+0x109/0x3f0 [] process_one_work+0x185/0x3f0 [] ? process_one_work+0x109/0x3f0 [] ? ieee80211_teardown_sdata+0xa0/0xa0 [mac80211] [] worker_thread+0x116/0x270 [] ? manage_workers+0x1e0/0x1e0 [] kthread+0x84/0x90 [] ? __init_kthread_worker+0x60/0x60 [] kernel_thread_helper+0x6/0x10 Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Helmut Schaa Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index ca36ccc..8f75402 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -396,8 +396,7 @@ struct rt2x00_intf { * for hardware which doesn't support hardware * sequence counting. */ - spinlock_t seqlock; - u16 seqno; + atomic_t seqno; }; static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index b49773e..dd24b26 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -277,7 +277,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, else rt2x00dev->intf_sta_count++; - spin_lock_init(&intf->seqlock); mutex_init(&intf->beacon_skb_mutex); intf->beacon = entry; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 4c662ec..2fd8301 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -207,6 +207,7 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); + u16 seqno; if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) return; @@ -238,15 +239,13 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev, * sequence counting per-frame, since those will override the * sequence counter given by mac80211. */ - spin_lock(&intf->seqlock); - if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) - intf->seqno += 0x10; - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - - spin_unlock(&intf->seqlock); + seqno = atomic_add_return(0x10, &intf->seqno); + else + seqno = atomic_read(&intf->seqno); + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(seqno); } static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev, -- cgit v0.10.2 From 69aaedd3cfd23b2c732e3cf1227370a35f5c89d4 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 1 Jun 2012 09:13:17 -0500 Subject: bcma: add ext PA workaround for BCM4331 and BCM43431 MacBook Pro models with BCM4331 wireless have been found to have the ext PA lines disabled after resuming from S3 without external power attach. This causes them to be unable to transmit. Add a workaround to ensure that the ext PA lines are enabled on BCM4331. Also extend all handling of ext PA line muxing to BCM43431 as is done in the Broadcom SDK. BugLink: http://bugs.launchpad.net/bugs/925577 Cc: Arend van Spriel Cc: Hauke Mehrtens Cc: stable@vger.kernel.org Signed-off-by: Seth Forshee Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c index a058842..61ce405 100644 --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -139,7 +139,9 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc) bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); break; case 0x4331: - /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + case 43431: + /* Ext PA lines must be enabled for tx on BCM4331 */ + bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true); break; case 43224: if (bus->chipinfo.rev == 0) { diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c index c7f9335..f16f42d 100644 --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -579,13 +579,13 @@ int bcma_sprom_get(struct bcma_bus *bus) if (!sprom) return -ENOMEM; - if (bus->chipinfo.id == 0x4331) + if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); pr_debug("SPROM offset 0x%x\n", offset); bcma_sprom_read(bus, offset, sprom); - if (bus->chipinfo.id == 0x4331) + if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); err = bcma_sprom_valid(sprom); -- cgit v0.10.2 From 794454ce72a298de6f4536ade597bdcc7dcde7c7 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Sun, 3 Jun 2012 23:32:32 +0300 Subject: mac80211: fix non RCU-safe sta_list manipulation sta_info_cleanup locks the sta_list using rcu_read_lock however the delete operation isn't rcu safe. A race between sta_info_cleanup timer being called and a STA being removed can occur which leads to a panic while traversing sta_list. Fix this by switching to the RCU-safe versions. Cc: stable@vger.kernel.org Reported-by: Eyal Shapira Signed-off-by: Arik Nemtsov Signed-off-by: John W. Linville diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index f5b1638..de455f8 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -378,7 +378,7 @@ static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU) /* make the station visible */ sta_info_hash_add(local, sta); - list_add(&sta->list, &local->sta_list); + list_add_rcu(&sta->list, &local->sta_list); set_sta_flag(sta, WLAN_STA_INSERTED); @@ -688,7 +688,7 @@ int __must_check __sta_info_destroy(struct sta_info *sta) if (ret) return ret; - list_del(&sta->list); + list_del_rcu(&sta->list); mutex_lock(&local->key_mtx); for (i = 0; i < NUM_DEFAULT_KEYS; i++) -- cgit v0.10.2 From fcb6ff5e2cb83e1de10631f6621f45ca3401bf61 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 4 Jun 2012 13:43:11 +0200 Subject: iwlwifi: disable WoWLAN if !CONFIG_PM_SLEEP If CONFIG_PM_SLEEP is disabled, then iwlwifi doesn't support suspend/resume handlers and thus mac80211 (correctly) refuses advertising WoWLAN. Disable WoWLAN in the driver in this case. Cc: stable@kernel.org Reported-by: Sebastian Kemper Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index ab2f4d7..5d158ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -199,6 +199,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, WIPHY_FLAG_DISABLE_BEACON_HINTS | WIPHY_FLAG_IBSS_RSN; +#ifdef CONFIG_PM_SLEEP if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len && priv->trans->ops->wowlan_suspend && device_can_wakeup(priv->trans->dev)) { @@ -217,6 +218,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, hw->wiphy->wowlan.pattern_max_len = IWLAGN_WOWLAN_MAX_PATTERN_LEN; } +#endif if (iwlwifi_mod_params.power_save) hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; -- cgit v0.10.2 From ddcd0f41471a1e0394c8840a119ec3986a78462c Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Thu, 31 May 2012 22:53:39 -0300 Subject: Bluetooth: Fix checking the wrong flag when accepting a socket Most probably a typo, the check should have been for BT_SK_DEFER_SETUP instead of BT_DEFER_SETUP (which right now only represents a socket option). Signed-off-by: Vinicius Costa Gomes Acked-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 46e7f86..3e18af4 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -210,7 +210,7 @@ struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock) } if (sk->sk_state == BT_CONNECTED || !newsock || - test_bit(BT_DEFER_SETUP, &bt_sk(parent)->flags)) { + test_bit(BT_SK_DEFER_SETUP, &bt_sk(parent)->flags)) { bt_accept_unlink(sk); if (newsock) sock_graft(sk, newsock); -- cgit v0.10.2 From f69a23b795d6ee3673583146ed7efcbaaa5add18 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Jun 2012 19:56:06 +0200 Subject: iwlwifi: fix double free/complete in firmware loading Linus reported that due to mac80211 failing to register the device (due to WoWLAN) his machine crashed etc. as we double-freed the vmalloc() firmware area. His patch to fix it was very similar to this one but I noticed that there's another bug in the area: we complete the completion before starting, so since we're running in a work struct context stop() could be called while in the middle of start() which will almost certainly lead to issues. Make a modification similar to his to avoid the double- free but also move the completion to another spot so it is only done after start() either finished or failed so that stop() can have a consistent state. Reported-by: Linus Torvalds Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index d742900..fac67a5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -861,13 +861,18 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) /* We have our copies now, allow OS release its copies */ release_firmware(ucode_raw); - complete(&drv->request_firmware_complete); drv->op_mode = iwl_dvm_ops.start(drv->trans, drv->cfg, &drv->fw); if (!drv->op_mode) - goto out_free_fw; + goto out_unbind; + /* + * Complete the firmware request last so that + * a driver unbind (stop) doesn't run while we + * are doing the start() above. + */ + complete(&drv->request_firmware_complete); return; try_again: -- cgit v0.10.2 From 0e1fa7ef25004b9c1a14147bce61c15c2f1c6744 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Jun 2012 09:38:35 +0200 Subject: iwlwifi: unregister LEDs if mac80211 registration fails Otherwise the LEDs stick around and cause issues the next time around since they're still there but not really hooked up. Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index 5d158ca..3ee23134 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -251,6 +251,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, ret = ieee80211_register_hw(priv->hw); if (ret) { IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); + iwl_leds_exit(priv); return ret; } priv->mac80211_registered = 1; -- cgit v0.10.2 From 463454b5dbd8dbab6e2fc6c557329e5b811b9c32 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Jun 2012 12:16:50 +0200 Subject: cfg80211: fix interface combinations check If a given interface combination doesn't contain a required interface type then we missed checking that and erroneously allowed it even though iface type wasn't there at all. Add a check that makes sure that all interface types are accounted for. Cc: stable@kernel.org Reported-by: Mohammed Shafi Shajakhan Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/util.c b/net/wireless/util.c index 55d9946..8f2d68f 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -935,6 +935,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype) { struct wireless_dev *wdev_iter; + u32 used_iftypes = BIT(iftype); int num[NUM_NL80211_IFTYPES]; int total = 1; int i, j; @@ -961,6 +962,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, num[wdev_iter->iftype]++; total++; + used_iftypes |= BIT(wdev_iter->iftype); } mutex_unlock(&rdev->devlist_mtx); @@ -970,6 +972,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) { const struct ieee80211_iface_combination *c; struct ieee80211_iface_limit *limits; + u32 all_iftypes = 0; c = &rdev->wiphy.iface_combinations[i]; @@ -984,6 +987,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, if (rdev->wiphy.software_iftypes & BIT(iftype)) continue; for (j = 0; j < c->n_limits; j++) { + all_iftypes |= limits[j].types; if (!(limits[j].types & BIT(iftype))) continue; if (limits[j].max < num[iftype]) @@ -991,7 +995,20 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, limits[j].max -= num[iftype]; } } - /* yay, it fits */ + + /* + * Finally check that all iftypes that we're currently + * using are actually part of this combination. If they + * aren't then we can't use this combination and have + * to continue to the next. + */ + if ((all_iftypes & used_iftypes) != used_iftypes) + goto cont; + + /* + * This combination covered all interface types and + * supported the requested numbers, so we're good. + */ kfree(limits); return 0; cont: -- cgit v0.10.2