diff options
author | Andreas Müller <schnitzeltony@gmx.de> | 2012-01-04 15:26:25 (GMT) |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-01-16 07:40:13 (GMT) |
commit | 137703b811502dfea364650fb3e17f20b4c21333 (patch) | |
tree | 40d0808c67ee5cbf308e481449dc78effbbffcfc | |
parent | 761ca31e47e483a0c0c66894ead1a2d0db37b314 (diff) | |
download | u-boot-137703b811502dfea364650fb3e17f20b4c21333.tar.xz |
overo: add SPL support
* implementation based on ti beagleboard/omap3evm
* timing data and i2c workaround for revision 0 boards taken from x-loader
* run-tested with overo revision 0 and 1 / boot from NAND and SDcard
* run-tested with x-loader
Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
Signed-off-by: Tom Rini <trini@ti.com>
-rw-r--r-- | arch/arm/include/asm/arch-omap3/mem.h | 26 | ||||
-rw-r--r-- | board/overo/config.mk | 28 | ||||
-rw-r--r-- | board/overo/overo.c | 65 | ||||
-rw-r--r-- | board/overo/overo.h | 5 | ||||
-rw-r--r-- | include/configs/omap3_overo.h | 52 |
5 files changed, 147 insertions, 29 deletions
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 5fd02d4..4ca929e 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -123,6 +123,32 @@ enum { V_MCFG_BANKALLOCATION_RBC | \ V_MCFG_B32NOT16_32 | V_MCFG_DEEPPD_EN | V_MCFG_RAMTYPE_DDR +/* Hynix part of Overo (165MHz optimized) 6.06ns */ +#define HYNIX_TDAL_165 6 +#define HYNIX_TDPL_165 3 +#define HYNIX_TRRD_165 2 +#define HYNIX_TRCD_165 3 +#define HYNIX_TRP_165 3 +#define HYNIX_TRAS_165 7 +#define HYNIX_TRC_165 10 +#define HYNIX_TRFC_165 21 +#define HYNIX_V_ACTIMA_165 \ + ACTIM_CTRLA(HYNIX_TRFC_165, HYNIX_TRC_165, \ + HYNIX_TRAS_165, HYNIX_TRP_165, \ + HYNIX_TRCD_165, HYNIX_TRRD_165, \ + HYNIX_TDPL_165, HYNIX_TDAL_165) + +#define HYNIX_TWTR_165 1 +#define HYNIX_TCKE_165 1 +#define HYNIX_TXP_165 2 +#define HYNIX_XSR_165 24 +#define HYNIX_V_ACTIMB_165 \ + ACTIM_CTRLB(HYNIX_TWTR_165, HYNIX_TCKE_165, \ + HYNIX_TXP_165, HYNIX_XSR_165) + +#define HYNIX_RASWIDTH_165 0x2 +#define HYNIX_V_MCFG_165(size) MCFG((size), HYNIX_RASWIDTH_165) + /* Hynix part of AM/DM37xEVM (200MHz optimized) */ #define HYNIX_TDAL_200 6 #define HYNIX_TDPL_200 3 diff --git a/board/overo/config.mk b/board/overo/config.mk deleted file mode 100644 index e7c471c..0000000 --- a/board/overo/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# Overo uses OMAP3 (ARM-CortexA8) cpu -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -CONFIG_SYS_TEXT_BASE = 0x80008000 diff --git a/board/overo/overo.c b/board/overo/overo.c index 4a20c7f..7b4064c 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -31,6 +31,7 @@ #include <common.h> #include <netdev.h> #include <twl4030.h> +#include <linux/mtd/nand.h> #include <asm/io.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/mux.h> @@ -100,6 +101,16 @@ int board_init(void) } /* + * Routine: omap_rev_string + * Description: For SPL builds output board rev + */ +#ifdef CONFIG_SPL_BUILD +void omap_rev_string(void) +{ +} +#endif + +/* * Routine: get_board_revision * Description: Returns the board revision */ @@ -107,6 +118,20 @@ int get_board_revision(void) { int revision; +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + unsigned char data; + + /* board revisions <= R2410 connect 4030 irq_1 to gpio112 */ + /* these boards should return a revision number of 0 */ + /* the code below forces a 4030 RTC irq to ensure that gpio112 is low */ + i2c_set_bus_num(TWL4030_I2C_BUS); + data = 0x01; + i2c_write(0x4B, 0x29, 1, &data, 1); + data = 0x0c; + i2c_write(0x4B, 0x2b, 1, &data, 1); + i2c_read(0x4B, 0x2a, 1, &data, 1); +#endif + if (!gpio_request(112, "") && !gpio_request(113, "") && !gpio_request(115, "")) { @@ -126,6 +151,44 @@ int get_board_revision(void) return revision; } +#ifdef CONFIG_SPL_BUILD +/* + * Routine: get_board_mem_timings + * Description: If we use SPL then there is no x-loader nor config header + * so we have to setup the DDR timings ourself on both banks. + */ +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr) +{ + *mr = MICRON_V_MR_165; + switch (get_board_revision()) { + case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */ + *mcfg = MICRON_V_MCFG_165(128 << 20); + *ctrla = MICRON_V_ACTIMA_165; + *ctrlb = MICRON_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + break; + case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */ + *mcfg = MICRON_V_MCFG_165(256 << 20); + *ctrla = MICRON_V_ACTIMA_165; + *ctrlb = MICRON_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + break; + case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */ + *mcfg = HYNIX_V_MCFG_165(256 << 20); + *ctrla = HYNIX_V_ACTIMA_165; + *ctrlb = HYNIX_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + break; + default: + *mcfg = MICRON_V_MCFG_165(128 << 20); + *ctrla = MICRON_V_ACTIMA_165; + *ctrlb = MICRON_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + } +} +#endif + /* * Routine: get_sdio2_config * Description: Return information about the wifi module connection @@ -337,7 +400,7 @@ int board_eth_init(bd_t *bis) return rc; } -#ifdef CONFIG_GENERIC_MMC +#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { omap_mmc_init(0); diff --git a/board/overo/overo.h b/board/overo/overo.h index 915f15b..b41b628 100644 --- a/board/overo/overo.h +++ b/board/overo/overo.h @@ -33,6 +33,11 @@ const omap3_sysinfo sysinfo = { #endif }; +/* overo revisions */ +#define REVISION_0 0x0 +#define REVISION_1 0x1 +#define REVISION_2 0x2 + /* * IEN - Input Enable * IDIS - Input Disable diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 8f2e69d..bfd4570 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -285,6 +285,11 @@ #endif /* (CONFIG_CMD_NET) */ +/* + * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader + * and older u-boot.bin with the new U-Boot SPL. + */ +#define CONFIG_SYS_TEXT_BASE 0x80008000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 @@ -294,4 +299,51 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_TEXT_BASE 0x40200800 +#define CONFIG_SPL_MAX_SIZE (45 * 1024) +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +/* move malloc and bss high to prevent clashing with the main image */ +#define CONFIG_SYS_SPL_MALLOC_START 0x87000000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 +#define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */ +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* NAND boot config */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + #endif /* __CONFIG_H */ |