powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 188 deletions

diff --git a/arch/powerpc/cpu/ppc4xx/cache.S b/arch/powerpc/cpu/ppc4xx/cache.S
deleted file mode 100644
index 93e8366..0000000
--- a/arch/powerpc/cpu/ppc4xx/cache.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * This file contains miscellaneous low-level functions.
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <config.h>
-#include <asm/ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/*
- * Flush instruction cache.
- */
-_GLOBAL(invalidate_icache)
-	iccci	r0,r0
-	isync
-	blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-	mr	r6,r3
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	mtctr	r4
-2:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	2b
-	sync				/* additional sync needed on g4 */
-	isync
-	blr
-
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS     64
-#define CACHE_NLINES    32
-
-_GLOBAL(flush_dcache)
-	li	r4,(2 * CACHE_NWAYS * CACHE_NLINES)
-	mtctr	r4
-	lis	r5,0
-1:	lwz	r3,0(r5)		/* Load one word from every line */
-	addi	r5,r5,L1_CACHE_BYTES
-	bdnz	1b
-	sync
-	blr
-
-_GLOBAL(invalidate_dcache)
-	addi	r6,0,0x0000		/* clear GPR 6 */
-	/* Do loop for # of dcache congruence classes. */
-	lis	r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha	/* TBS for large sized cache */
-	ori	r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
-					/* NOTE: dccci invalidates both */
-	mtctr	r7			/* ways in the D cache */
-..dcloop:
-	dccci	0,r6			/* invalidate line */
-	addi	r6,r6,L1_CACHE_BYTES	/* bump to next line */
-	bdnz	..dcloop
-	sync
-	blr
-
-/*
- * Cache functions.
- *
- * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
- * although for some cache-ralated calls stubs have to be provided to satisfy
- * symbols resolution.
- * Icache-related functions are used in POST framework.
- *
- */
-#ifdef CONFIG_440
-
-       .globl  dcache_disable
-       .globl  dcache_enable
-       .globl  icache_disable
-       .globl  icache_enable
-dcache_disable:
-dcache_enable:
-icache_disable:
-icache_enable:
-	blr
-
-	.globl	dcache_status
-	.globl	icache_status
-dcache_status:
-icache_status:
-	mr	r3,  0
-	blr
-
-#else /* CONFIG_440 */
-
-	.globl	icache_enable
-icache_enable:
-	mflr	r8
-	bl	invalidate_icache
-	mtlr	r8
-	isync
-	addis	r3,r0, 0xc000	      /* set bit 0 */
-	mticcr	r3
-	blr
-
-	.globl	icache_disable
-icache_disable:
-	addis	r3,r0, 0x0000	      /* clear bit 0 */
-	mticcr	r3
-	isync
-	blr
-
-	.globl	icache_status
-icache_status:
-	mficcr	r3
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
-	blr
-
-	.globl	dcache_enable
-dcache_enable:
-	mflr	r8
-	bl	invalidate_dcache
-	mtlr	r8
-	isync
-	addis	r3,r0, 0x8000	      /* set bit 0 */
-	mtdccr	r3
-	blr
-
-	.globl	dcache_disable
-dcache_disable:
-	mflr	r8
-	bl	flush_dcache
-	mtlr	r8
-	addis	r3,r0, 0x0000	      /* clear bit 0 */
-	mtdccr	r3
-	blr
-
-	.globl	dcache_status
-dcache_status:
-	mfdccr	r3
-	srwi	r3, r3, 31	/* >>31 => select bit 0 */
-	blr
-
-#endif /* CONFIG_440 */