Move arch/ppc to arch/powerpc

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>

1 files changed, 0 insertions, 1000 deletions

diff --git a/arch/ppc/cpu/mpc8220/fec.c b/arch/ppc/cpu/mpc8220/fec.c
deleted file mode 100644
index 992e0ff..0000000
--- a/arch/ppc/cpu/mpc8220/fec.c
+++ /dev/null
@@ -1,1000 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.c,
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include "dma.h"
-#include "fec.h"
-
-#undef  DEBUG
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
-    defined(CONFIG_MPC8220_FEC)
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#ifdef DEBUG
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
-#endif /* DEBUG */
-
-#ifdef DEBUG
-static u32 local_crc32 (char *string, unsigned int crc_value, int len);
-#endif
-
-typedef struct {
-	u8 data[1500];		/* actual data */
-	int length;		/* actual length */
-	int used;		/* buffer in use or not */
-	u8 head[16];		/* MAC header(6 + 6 + 2) + 2(aligned) */
-} NBUF;
-
-int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
-int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data);
-
-/********************************************************************/
-#ifdef DEBUG
-static void mpc8220_fec_phydump (char *devname)
-{
-	u16 phyStatus, i;
-	u8 phyAddr = CONFIG_PHY_ADDR;
-	u8 reg_mask[] = {
-#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
-		/* regs to print: 0...7, 16...19, 21, 23, 24 */
-		1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
-		1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
-#else
-		/* regs to print: 0...8, 16...20 */
-		1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
-		1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-#endif
-	};
-
-	for (i = 0; i < 32; i++) {
-		if (reg_mask[i]) {
-			miiphy_read (devname, phyAddr, i, &phyStatus);
-			printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
-		}
-	}
-}
-#endif
-
-/********************************************************************/
-static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec)
-{
-	int ix;
-	char *data;
-	static int once = 0;
-
-	for (ix = 0; ix < FEC_RBD_NUM; ix++) {
-		if (!once) {
-			data = (char *) malloc (FEC_MAX_PKT_SIZE);
-			if (data == NULL) {
-				printf ("RBD INIT FAILED\n");
-				return -1;
-			}
-			fec->rbdBase[ix].dataPointer = (u32) data;
-		}
-		fec->rbdBase[ix].status = FEC_RBD_EMPTY;
-		fec->rbdBase[ix].dataLength = 0;
-	}
-	once++;
-
-	/*
-	 * have the last RBD to close the ring
-	 */
-	fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
-	fec->rbdIndex = 0;
-
-	return 0;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec)
-{
-	int ix;
-
-	for (ix = 0; ix < FEC_TBD_NUM; ix++) {
-		fec->tbdBase[ix].status = 0;
-	}
-
-	/*
-	 * Have the last TBD to close the ring
-	 */
-	fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
-
-	/*
-	 * Initialize some indices
-	 */
-	fec->tbdIndex = 0;
-	fec->usedTbdIndex = 0;
-	fec->cleanTbdNum = FEC_TBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd)
-{
-	/*
-	 * Reset buffer descriptor as empty
-	 */
-	if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
-		pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
-	else
-		pRbd->status = FEC_RBD_EMPTY;
-
-	pRbd->dataLength = 0;
-
-	/*
-	 * Now, we have an empty RxBD, restart the SmartDMA receive task
-	 */
-	DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
-	/*
-	 * Increment BD count
-	 */
-	fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
-{
-	FEC_TBD *pUsedTbd;
-
-#ifdef DEBUG
-	printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
-		fec->cleanTbdNum, fec->usedTbdIndex);
-#endif
-
-	/*
-	 * process all the consumed TBDs
-	 */
-	while (fec->cleanTbdNum < FEC_TBD_NUM) {
-		pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
-		if (pUsedTbd->status & FEC_TBD_READY) {
-#ifdef DEBUG
-			printf ("Cannot clean TBD %d, in use\n",
-				fec->cleanTbdNum);
-#endif
-			return;
-		}
-
-		/*
-		 * clean this buffer descriptor
-		 */
-		if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
-			pUsedTbd->status = FEC_TBD_WRAP;
-		else
-			pUsedTbd->status = 0;
-
-		/*
-		 * update some indeces for a correct handling of the TBD ring
-		 */
-		fec->cleanTbdNum++;
-		fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
-	}
-}
-
-/********************************************************************/
-static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac)
-{
-	u8 currByte;		/* byte for which to compute the CRC */
-	int byte;		/* loop - counter */
-	int bit;		/* loop - counter */
-	u32 crc = 0xffffffff;	/* initial value */
-
-	/*
-	 * The algorithm used is the following:
-	 * we loop on each of the six bytes of the provided address,
-	 * and we compute the CRC by left-shifting the previous
-	 * value by one position, so that each bit in the current
-	 * byte of the address may contribute the calculation. If
-	 * the latter and the MSB in the CRC are different, then
-	 * the CRC value so computed is also ex-ored with the
-	 * "polynomium generator". The current byte of the address
-	 * is also shifted right by one bit at each iteration.
-	 * This is because the CRC generatore in hardware is implemented
-	 * as a shift-register with as many ex-ores as the radixes
-	 * in the polynomium. This suggests that we represent the
-	 * polynomiumm itself as a 32-bit constant.
-	 */
-	for (byte = 0; byte < 6; byte++) {
-		currByte = mac[byte];
-		for (bit = 0; bit < 8; bit++) {
-			if ((currByte & 0x01) ^ (crc & 0x01)) {
-				crc >>= 1;
-				crc = crc ^ 0xedb88320;
-			} else {
-				crc >>= 1;
-			}
-			currByte >>= 1;
-		}
-	}
-
-	crc = crc >> 26;
-
-	/*
-	 * Set individual hash table register
-	 */
-	if (crc >= 32) {
-		fec->eth->iaddr1 = (1 << (crc - 32));
-		fec->eth->iaddr2 = 0;
-	} else {
-		fec->eth->iaddr1 = 0;
-		fec->eth->iaddr2 = (1 << crc);
-	}
-
-	/*
-	 * Set physical address
-	 */
-	fec->eth->paddr1 =
-		(mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
-	fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
-}
-
-/********************************************************************/
-static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
-{
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
-	const u8 phyAddr = CONFIG_PHY_ADDR;	/* Only one PHY */
-
-#ifdef DEBUG
-	printf ("mpc8220_fec_init... Begin\n");
-#endif
-
-	/*
-	 * Initialize RxBD/TxBD rings
-	 */
-	mpc8220_fec_rbd_init (fec);
-	mpc8220_fec_tbd_init (fec);
-
-	/*
-	 * Set up Pin Muxing for FEC 1
-	 */
-	*(vu_long *) MMAP_PCFG = 0;
-	*(vu_long *) (MMAP_PCFG + 4) = 0;
-	/*
-	 * Clear FEC-Lite interrupt event register(IEVENT)
-	 */
-	fec->eth->ievent = 0xffffffff;
-
-	/*
-	 * Set interrupt mask register
-	 */
-	fec->eth->imask = 0x00000000;
-
-	/*
-	 * Set FEC-Lite receive control register(R_CNTRL):
-	 */
-	if (fec->xcv_type == SEVENWIRE) {
-		/*
-		 * Frame length=1518; 7-wire mode
-		 */
-		fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
-	} else {
-		/*
-		 * Frame length=1518; MII mode;
-		 */
-		fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
-	}
-
-	fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
-	if (fec->xcv_type != SEVENWIRE) {
-		/*
-		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
-		 * and do not drop the Preamble.
-		 */
-		/* tbd - rtm */
-		/*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
-		/* No MII for 7-wire mode */
-		fec->eth->mii_speed = 0x00000030;
-	}
-
-	/*
-	 * Set Opcode/Pause Duration Register
-	 */
-	fec->eth->op_pause = 0x00010020;	/*FIXME0xffff0020; */
-
-	/*
-	 * Set Rx FIFO alarm and granularity value
-	 */
-	fec->eth->rfifo_cntrl = 0x0c000000;
-	fec->eth->rfifo_alarm = 0x0000030c;
-#ifdef DEBUG
-	if (fec->eth->rfifo_status & 0x00700000) {
-		printf ("mpc8220_fec_init() RFIFO error\n");
-	}
-#endif
-
-	/*
-	 * Set Tx FIFO granularity value
-	 */
-	/*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
-	fec->eth->tfifo_cntrl = 0x0e000000;
-#ifdef DEBUG
-	printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
-	printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
-#endif
-
-	/*
-	 * Set transmit fifo watermark register(X_WMRK), default = 64
-	 */
-	fec->eth->tfifo_alarm = 0x00000080;
-	fec->eth->x_wmrk = 0x2;
-
-	/*
-	 * Set individual address filter for unicast address
-	 * and set physical address registers.
-	 */
-	mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr));
-
-	/*
-	 * Set multicast address filter
-	 */
-	fec->eth->gaddr1 = 0x00000000;
-	fec->eth->gaddr2 = 0x00000000;
-
-	/*
-	 * Turn ON cheater FSM: ????
-	 */
-	fec->eth->xmit_fsm = 0x03000000;
-
-#if 1
-/*#if defined(CONFIG_MPC5200)*/
-	/*
-	 * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
-	 * work w/ the current receive task.
-	 */
-	dma->PtdCntrl |= 0x00000001;
-#endif
-
-	/*
-	 * Set priority of different initiators
-	 */
-	dma->IPR0 = 7;		/* always */
-	dma->IPR3 = 6;		/* Eth RX */
-	dma->IPR4 = 5;		/* Eth Tx */
-
-	/*
-	 * Clear SmartDMA task interrupt pending bits
-	 */
-	DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
-
-	/*
-	 * Initialize SmartDMA parameters stored in SRAM
-	 */
-	*(int *) FEC_TBD_BASE = (int) fec->tbdBase;
-	*(int *) FEC_RBD_BASE = (int) fec->rbdBase;
-	*(int *) FEC_TBD_NEXT = (int) fec->tbdBase;
-	*(int *) FEC_RBD_NEXT = (int) fec->rbdBase;
-
-	if (fec->xcv_type != SEVENWIRE) {
-		/*
-		 * Initialize PHY(LXT971A):
-		 *
-		 *   Generally, on power up, the LXT971A reads its configuration
-		 *   pins to check for forced operation, If not cofigured for
-		 *   forced operation, it uses auto-negotiation/parallel detection
-		 *   to automatically determine line operating conditions.
-		 *   If the PHY device on the other side of the link supports
-		 *   auto-negotiation, the LXT971A auto-negotiates with it
-		 *   using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
-		 *   support auto-negotiation, the LXT971A automatically detects
-		 *   the presence of either link pulses(10Mbps PHY) or Idle
-		 *   symbols(100Mbps) and sets its operating conditions accordingly.
-		 *
-		 *   When auto-negotiation is controlled by software, the following
-		 *   steps are recommended.
-		 *
-		 * Note:
-		 *   The physical address is dependent on hardware configuration.
-		 *
-		 */
-		int timeout = 1;
-		u16 phyStatus;
-
-		/*
-		 * Reset PHY, then delay 300ns
-		 */
-		miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
-		udelay (1000);
-
-		if (fec->xcv_type == MII10) {
-			/*
-			 * Force 10Base-T, FDX operation
-			 */
-#ifdef DEBUG
-			printf ("Forcing 10 Mbps ethernet link... ");
-#endif
-			miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-			/*
-			   miiphy_write(fec, phyAddr, 0x0, 0x0100);
-			 */
-			miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
-
-			timeout = 20;
-			do {	/* wait for link status to go down */
-				udelay (10000);
-				if ((timeout--) == 0) {
-#ifdef DEBUG
-					printf ("hmmm, should not have waited...");
-#endif
-					break;
-				}
-				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
-				printf ("=");
-#endif
-			} while ((phyStatus & 0x0004)); /* !link up */
-
-			timeout = 1000;
-			do {	/* wait for link status to come back up */
-				udelay (10000);
-				if ((timeout--) == 0) {
-					printf ("failed. Link is down.\n");
-					break;
-				}
-				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
-				printf ("+");
-#endif
-			} while (!(phyStatus & 0x0004));	/* !link up */
-
-#ifdef DEBUG
-			printf ("done.\n");
-#endif
-		} else {	/* MII100 */
-			/*
-			 * Set the auto-negotiation advertisement register bits
-			 */
-			miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
-
-			/*
-			 * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
-			 */
-			miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
-
-			/*
-			 * Wait for AN completion
-			 */
-			timeout = 5000;
-			do {
-				udelay (1000);
-
-				if ((timeout--) == 0) {
-#ifdef DEBUG
-					printf ("PHY auto neg 0 failed...\n");
-#endif
-					return -1;
-				}
-
-				if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
-				    0) {
-#ifdef DEBUG
-					printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
-#endif
-					return -1;
-				}
-			} while (!(phyStatus & 0x0004));
-
-#ifdef DEBUG
-			printf ("PHY auto neg complete! \n");
-#endif
-		}
-
-	}
-
-	/*
-	 * Enable FEC-Lite controller
-	 */
-	fec->eth->ecntrl |= 0x00000006;
-
-#ifdef DEBUG
-	if (fec->xcv_type != SEVENWIRE)
-		mpc8220_fec_phydump (dev->name);
-#endif
-
-	/*
-	 * Enable SmartDMA receive task
-	 */
-	DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
-#ifdef DEBUG
-	printf ("mpc8220_fec_init... Done \n");
-#endif
-
-	return 1;
-}
-
-/********************************************************************/
-static void mpc8220_fec_halt (struct eth_device *dev)
-{
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	int counter = 0xffff;
-
-#ifdef DEBUG
-	if (fec->xcv_type != SEVENWIRE)
-		mpc8220_fec_phydump (dev->name);
-#endif
-
-	/*
-	 * mask FEC chip interrupts
-	 */
-	fec->eth->imask = 0;
-
-	/*
-	 * issue graceful stop command to the FEC transmitter if necessary
-	 */
-	fec->eth->x_cntrl |= 0x00000001;
-
-	/*
-	 * wait for graceful stop to register
-	 */
-	while ((counter--) && (!(fec->eth->ievent & 0x10000000)));
-
-	/*
-	 * Disable SmartDMA tasks
-	 */
-	DMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
-	DMA_TASK_DISABLE (FEC_RECV_TASK_NO);
-
-	/*
-	 * Disable the Ethernet Controller
-	 */
-	fec->eth->ecntrl &= 0xfffffffd;
-
-	/*
-	 * Clear FIFO status registers
-	 */
-	fec->eth->rfifo_status &= 0x00700000;
-	fec->eth->tfifo_status &= 0x00700000;
-
-	fec->eth->reset_cntrl = 0x01000000;
-
-	/*
-	 * Issue a reset command to the FEC chip
-	 */
-	fec->eth->ecntrl |= 0x1;
-
-	/*
-	 * wait at least 16 clock cycles
-	 */
-	udelay (10);
-
-#ifdef DEBUG
-	printf ("Ethernet task stopped\n");
-#endif
-}
-
-#ifdef DEBUG
-/********************************************************************/
-
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
-	u16 phyAddr = CONFIG_PHY_ADDR;
-	u16 phyStatus;
-
-	if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
-	    || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
-
-		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
-		printf ("\nphyStatus: 0x%04x\n", phyStatus);
-		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
-		printf ("ievent:   0x%08x\n", fec->eth->ievent);
-		printf ("x_status: 0x%08x\n", fec->eth->x_status);
-		printf ("tfifo: status	0x%08x\n", fec->eth->tfifo_status);
-
-		printf ("	control 0x%08x\n", fec->eth->tfifo_cntrl);
-		printf ("	lrfp	0x%08x\n", fec->eth->tfifo_lrf_ptr);
-		printf ("	lwfp	0x%08x\n", fec->eth->tfifo_lwf_ptr);
-		printf ("	alarm	0x%08x\n", fec->eth->tfifo_alarm);
-		printf ("	readptr 0x%08x\n", fec->eth->tfifo_rdptr);
-		printf ("	writptr 0x%08x\n", fec->eth->tfifo_wrptr);
-	}
-}
-
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
-	u16 phyAddr = CONFIG_PHY_ADDR;
-	u16 phyStatus;
-
-	if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
-	    || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
-
-		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
-		printf ("\nphyStatus: 0x%04x\n", phyStatus);
-		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
-		printf ("ievent:   0x%08x\n", fec->eth->ievent);
-		printf ("x_status: 0x%08x\n", fec->eth->x_status);
-		printf ("rfifo: status	0x%08x\n", fec->eth->rfifo_status);
-
-		printf ("	control 0x%08x\n", fec->eth->rfifo_cntrl);
-		printf ("	lrfp	0x%08x\n", fec->eth->rfifo_lrf_ptr);
-		printf ("	lwfp	0x%08x\n", fec->eth->rfifo_lwf_ptr);
-		printf ("	alarm	0x%08x\n", fec->eth->rfifo_alarm);
-		printf ("	readptr 0x%08x\n", fec->eth->rfifo_rdptr);
-		printf ("	writptr 0x%08x\n", fec->eth->rfifo_wrptr);
-	}
-}
-#endif /* DEBUG */
-
-/********************************************************************/
-
-static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
-			     int data_length)
-{
-	/*
-	 * This routine transmits one frame.  This routine only accepts
-	 * 6-byte Ethernet addresses.
-	 */
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	FEC_TBD *pTbd;
-
-#ifdef DEBUG
-	printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
-	tfifo_print (dev->name, fec);
-#endif
-
-	/*
-	 * Clear Tx BD ring at first
-	 */
-	mpc8220_fec_tbd_scrub (fec);
-
-	/*
-	 * Check for valid length of data.
-	 */
-	if ((data_length > 1500) || (data_length <= 0)) {
-		return -1;
-	}
-
-	/*
-	 * Check the number of vacant TxBDs.
-	 */
-	if (fec->cleanTbdNum < 1) {
-#ifdef DEBUG
-		printf ("No available TxBDs ...\n");
-#endif
-		return -1;
-	}
-
-	/*
-	 * Get the first TxBD to send the mac header
-	 */
-	pTbd = &fec->tbdBase[fec->tbdIndex];
-	pTbd->dataLength = data_length;
-	pTbd->dataPointer = (u32) eth_data;
-	pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
-	fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
-
-#ifdef DEBUG
-	printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
-#endif
-
-	/*
-	 * Kick the MII i/f
-	 */
-	if (fec->xcv_type != SEVENWIRE) {
-		u16 phyStatus;
-
-		miiphy_read (dev->name, 0, 0x1, &phyStatus);
-	}
-
-	/*
-	 * Enable SmartDMA transmit task
-	 */
-
-#ifdef DEBUG
-	tfifo_print (dev->name, fec);
-#endif
-
-	DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
-
-#ifdef DEBUG
-	tfifo_print (dev->name, fec);
-#endif
-
-#ifdef DEBUG
-	printf ("+");
-#endif
-
-	fec->cleanTbdNum -= 1;
-
-#ifdef DEBUG
-	printf ("smartDMA ethernet Tx task enabled\n");
-#endif
-	/*
-	 * wait until frame is sent .
-	 */
-	while (pTbd->status & FEC_TBD_READY) {
-		udelay (10);
-#ifdef DEBUG
-		printf ("TDB status = %04x\n", pTbd->status);
-#endif
-	}
-
-	return 0;
-}
-
-
-/********************************************************************/
-static int mpc8220_fec_recv (struct eth_device *dev)
-{
-	/*
-	 * This command pulls one frame from the card
-	 */
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
-	unsigned long ievent;
-	int frame_length, len = 0;
-	NBUF *frame;
-
-#ifdef DEBUG
-	printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
-	printf ("-");
-#endif
-
-	/*
-	 * Check if any critical events have happened
-	 */
-	ievent = fec->eth->ievent;
-	fec->eth->ievent = ievent;
-	if (ievent & 0x20060000) {
-		/* BABT, Rx/Tx FIFO errors */
-		mpc8220_fec_halt (dev);
-		mpc8220_fec_init (dev, NULL);
-		return 0;
-	}
-	if (ievent & 0x80000000) {
-		/* Heartbeat error */
-		fec->eth->x_cntrl |= 0x00000001;
-	}
-	if (ievent & 0x10000000) {
-		/* Graceful stop complete */
-		if (fec->eth->x_cntrl & 0x00000001) {
-			mpc8220_fec_halt (dev);
-			fec->eth->x_cntrl &= ~0x00000001;
-			mpc8220_fec_init (dev, NULL);
-		}
-	}
-
-	if (!(pRbd->status & FEC_RBD_EMPTY)) {
-		if ((pRbd->status & FEC_RBD_LAST)
-		    && !(pRbd->status & FEC_RBD_ERR)
-		    && ((pRbd->dataLength - 4) > 14)) {
-
-			/*
-			 * Get buffer address and size
-			 */
-			frame = (NBUF *) pRbd->dataPointer;
-			frame_length = pRbd->dataLength - 4;
-
-#if (0)
-			{
-				int i;
-
-				printf ("recv data hdr:");
-				for (i = 0; i < 14; i++)
-					printf ("%x ", *(frame->head + i));
-				printf ("\n");
-			}
-#endif
-			/*
-			 *  Fill the buffer and pass it to upper layers
-			 */
-/*			memcpy(buff, frame->head, 14);
-			memcpy(buff + 14, frame->data, frame_length);*/
-			NetReceive ((volatile uchar *) pRbd->dataPointer,
-				    frame_length);
-			len = frame_length;
-		}
-		/*
-		 * Reset buffer descriptor as empty
-		 */
-		mpc8220_fec_rbd_clean (fec, pRbd);
-	}
-	DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
-	return len;
-}
-
-
-/********************************************************************/
-int mpc8220_fec_initialize (bd_t * bis)
-{
-	mpc8220_fec_priv *fec;
-
-#ifdef CONFIG_HAS_ETH1
-	mpc8220_fec_priv *fec2;
-#endif
-	struct eth_device *dev;
-	char *tmp, *end;
-	char env_enetaddr[6];
-
-#ifdef CONFIG_HAS_ETH1
-	char env_enet1addr[6];
-#endif
-	int i;
-
-	fec = (mpc8220_fec_priv *) malloc (sizeof (*fec));
-	dev = (struct eth_device *) malloc (sizeof (*dev));
-	memset (dev, 0, sizeof *dev);
-
-	fec->eth = (ethernet_regs *) MMAP_FEC1;
-#ifdef CONFIG_HAS_ETH1
-	fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
-	fec2->eth = (ethernet_regs *) MMAP_FEC2;
-#endif
-	fec->tbdBase = (FEC_TBD *) FEC_BD_BASE;
-	fec->rbdBase =
-		(FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD));
-	fec->xcv_type = MII100;
-
-	dev->priv = (void *) fec;
-	dev->iobase = MMAP_FEC1;
-	dev->init = mpc8220_fec_init;
-	dev->halt = mpc8220_fec_halt;
-	dev->send = mpc8220_fec_send;
-	dev->recv = mpc8220_fec_recv;
-
-	sprintf (dev->name, "FEC ETHERNET");
-	eth_register (dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-	miiphy_register (dev->name,
-			fec8220_miiphy_read, fec8220_miiphy_write);
-#endif
-
-	/*
-	 * Try to set the mac address now. The fec mac address is
-	 * a garbage after reset. When not using fec for booting
-	 * the Linux fec driver will try to work with this garbage.
-	 */
-	tmp = getenv ("ethaddr");
-	if (tmp) {
-		for (i = 0; i < 6; i++) {
-			env_enetaddr[i] =
-				tmp ? simple_strtoul (tmp, &end, 16) : 0;
-			if (tmp)
-				tmp = (*end) ? end + 1 : end;
-		}
-		mpc8220_fec_set_hwaddr (fec, env_enetaddr);
-	}
-#ifdef CONFIG_HAS_ETH1
-	tmp = getenv ("eth1addr");
-	if (tmp) {
-		for (i = 0; i < 6; i++) {
-			env_enet1addr[i] =
-				tmp ? simple_strtoul (tmp, &end, 16) : 0;
-			if (tmp)
-				tmp = (*end) ? end + 1 : end;
-		}
-		mpc8220_fec_set_hwaddr (fec2, env_enet1addr);
-	}
-#endif
-
-	return 1;
-}
-
-/* MII-interface related functions */
-/********************************************************************/
-int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
-{
-	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
-	u32 reg;		/* convenient holder for the PHY register */
-	u32 phy;		/* convenient holder for the PHY */
-	int timeout = 0xffff;
-
-	/*
-	 * reading from any PHY's register is done by properly
-	 * programming the FEC's MII data register.
-	 */
-	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
-	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
-	eth->mii_data =
-		(FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy
-		 | reg);
-
-	/*
-	 * wait for the related interrupt
-	 */
-	while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
-	if (timeout == 0) {
-#ifdef DEBUG
-		printf ("Read MDIO failed...\n");
-#endif
-		return -1;
-	}
-
-	/*
-	 * clear mii interrupt bit
-	 */
-	eth->ievent = 0x00800000;
-
-	/*
-	 * it's now safe to read the PHY's register
-	 */
-	*retVal = (u16) eth->mii_data;
-
-	return 0;
-}
-
-/********************************************************************/
-int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
-{
-	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
-	u32 reg;		/* convenient holder for the PHY register */
-	u32 phy;		/* convenient holder for the PHY */
-	int timeout = 0xffff;
-
-	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
-	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
-	eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
-			 FEC_MII_DATA_TA | phy | reg | data);
-
-	/*
-	 * wait for the MII interrupt
-	 */
-	while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
-	if (timeout == 0) {
-#ifdef DEBUG
-		printf ("Write MDIO failed...\n");
-#endif
-		return -1;
-	}
-
-	/*
-	 * clear MII interrupt bit
-	 */
-	eth->ievent = 0x00800000;
-
-	return 0;
-}
-
-#ifdef DEBUG
-static u32 local_crc32 (char *string, unsigned int crc_value, int len)
-{
-	int i;
-	char c;
-	unsigned int crc, count;
-
-	/*
-	 * crc32 algorithm
-	 */
-	/*
-	 * crc = 0xffffffff; * The initialized value should be 0xffffffff
-	 */
-	crc = crc_value;
-
-	for (i = len; --i >= 0;) {
-		c = *string++;
-		for (count = 0; count < 8; count++) {
-			if ((c & 0x01) ^ (crc & 0x01)) {
-				crc >>= 1;
-				crc = crc ^ 0xedb88320;
-			} else {
-				crc >>= 1;
-			}
-			c >>= 1;
-		}
-	}
-
-	/*
-	 * In big endian system, do byte swaping for crc value
-	 */
-	return crc;
-}
-#endif /* DEBUG */
-
-#endif /* CONFIG_MPC8220_FEC */