diff options
author | Kuo-Jung Su <dantesu@faraday-tech.com> | 2013-05-15 07:29:23 (GMT) |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2013-06-12 20:22:51 (GMT) |
commit | e82a316d7f9425943d86c1ed61c5cf57b0d5b188 (patch) | |
tree | f32a19b18dde2c92c54c86018f88689057e9f6fb /include/usb/fusbh200.h | |
parent | aa1550588cc60549bf3a97dc6dccb7de4c022aa6 (diff) | |
download | u-boot-e82a316d7f9425943d86c1ed61c5cf57b0d5b188.tar.xz |
usb: ehci: add Faraday USB 2.0 EHCI support
This patch adds support to both Faraday FUSBH200 and FOTG210,
the differences between Faraday EHCI and standard EHCI are
listed bellow:
1. The PORTSC starts at 0x30 instead of 0x44.
2. The CONFIGFLAG(0x40) is not only un-implemented, and
also has its address space removed.
3. Faraday EHCI is a TDI design, but it doesn't
compatible with the general TDI implementation
found at both U-Boot and Linux.
4. The ISOC descriptors differ from standard EHCI in
several ways. But since U-boot doesn't support ISOC,
we don't have to worry about that.
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Marek Vasut <marex@denx.de>
Diffstat (limited to 'include/usb/fusbh200.h')
-rw-r--r-- | include/usb/fusbh200.h | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h new file mode 100644 index 0000000..8a9c488 --- /dev/null +++ b/include/usb/fusbh200.h @@ -0,0 +1,61 @@ +/* + * Faraday USB 2.0 EHCI Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#ifndef _FUSBH200_H +#define _FUSBH200_H + +struct fusbh200_regs { + struct { + uint32_t data[4]; + } hccr; /* 0x00 - 0x0f: hccr */ + struct { + uint32_t data[9]; + } hcor; /* 0x10 - 0x33: hcor */ + uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */ + uint32_t rsvd[2]; + uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */ + uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */ + uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */ +}; + +/* EOF & Async. Schedule Sleep Timer Register */ +#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */ +#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */ +#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */ +#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */ +#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */ + +/* Bus Monitor Control Status Register */ +#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */ +#define BMCSR_SPD_LOW (1 << 9) +#define BMCSR_SPD_FULL (0 << 9) +#define BMCSR_SPD_MASK (3 << 9) +#define BMCSR_SPD_SHIFT 9 +#define BMCSR_SPD(x) ((x >> 9) & 0x03) +#define BMCSR_VBUS (1 << 8) /* VBUS Valid */ +#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */ +#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */ +#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */ +#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */ +#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */ +#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/ +#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/ +#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/ +#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/ + +/* Bus Monitor Interrupt Status Register */ +/* Bus Monitor Interrupt Enable Register */ +#define BMISR_DMAERR (1 << 4) /* DMA error */ +#define BMISR_DMA (1 << 3) /* DMA complete */ +#define BMISR_DEVRM (1 << 2) /* device removed */ +#define BMISR_OVD (1 << 1) /* over-current detected */ +#define BMISR_VBUSERR (1 << 0) /* VBUS error */ + +#endif |