diff options
-rw-r--r-- | drivers/misc/cros_ec_i2c.c | 82 | ||||
-rw-r--r-- | include/configs/snow.h | 1 |
2 files changed, 30 insertions, 53 deletions
diff --git a/drivers/misc/cros_ec_i2c.c b/drivers/misc/cros_ec_i2c.c index 513cdb1..f9bc975 100644 --- a/drivers/misc/cros_ec_i2c.c +++ b/drivers/misc/cros_ec_i2c.c @@ -14,6 +14,7 @@ */ #include <common.h> +#include <dm.h> #include <i2c.h> #include <cros_ec.h> @@ -23,11 +24,11 @@ #define debug_trace(fmt, b...) #endif -int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, - const uint8_t *dout, int dout_len, - uint8_t **dinp, int din_len) +static int cros_ec_i2c_command(struct udevice *udev, uint8_t cmd, + int cmd_version, const uint8_t *dout, + int dout_len, uint8_t **dinp, int din_len) { - int old_bus = 0; + struct cros_ec_dev *dev = udev->uclass_priv; /* version8, cmd8, arglen8, out8[dout_len], csum8 */ int out_bytes = dout_len + 4; /* response8, arglen8, in8[din_len], checksum8 */ @@ -37,8 +38,6 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, uint8_t *in_ptr; int len, csum, ret; - old_bus = i2c_get_bus_num(); - /* * Sanity-check I/O sizes given transaction overhead in internal * buffers. @@ -86,36 +85,24 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, *ptr++ = (uint8_t) cros_ec_calc_checksum(dev->dout, dout_len + 3); - /* Set to the proper i2c bus */ - if (i2c_set_bus_num(dev->bus_num)) { - debug("%s: Cannot change to I2C bus %d\n", __func__, - dev->bus_num); - return -1; - } - /* Send output data */ cros_ec_dump_data("out", -1, dev->dout, out_bytes); - ret = i2c_write(dev->addr, 0, 0, dev->dout, out_bytes); + ret = dm_i2c_write(udev, 0, dev->dout, out_bytes); if (ret) { - debug("%s: Cannot complete I2C write to 0x%x\n", - __func__, dev->addr); + debug("%s: Cannot complete I2C write to %s\n", __func__, + udev->name); ret = -1; } if (!ret) { - ret = i2c_read(dev->addr, 0, 0, in_ptr, in_bytes); + ret = dm_i2c_read(udev, 0, in_ptr, in_bytes); if (ret) { - debug("%s: Cannot complete I2C read from 0x%x\n", - __func__, dev->addr); + debug("%s: Cannot complete I2C read from %s\n", + __func__, udev->name); ret = -1; } } - /* Return to original bus number */ - i2c_set_bus_num(old_bus); - if (ret) - return ret; - if (*in_ptr != EC_RES_SUCCESS) { debug("%s: Received bad result code %d\n", __func__, *in_ptr); return -(int)*in_ptr; @@ -142,35 +129,24 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, return din_len; } -int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob) +static int cros_ec_probe(struct udevice *dev) { - /* Decode interface-specific FDT params */ - dev->max_frequency = fdtdec_get_int(blob, dev->node, - "i2c-max-frequency", 100000); - dev->bus_num = i2c_get_bus_num_fdt(dev->parent_node); - if (dev->bus_num == -1) { - debug("%s: Failed to read bus number\n", __func__); - return -1; - } - dev->addr = fdtdec_get_int(blob, dev->node, "reg", -1); - if (dev->addr == -1) { - debug("%s: Failed to read device address\n", __func__); - return -1; - } - - return 0; + return cros_ec_register(dev); } -/** - * Initialize I2C protocol. - * - * @param dev CROS_EC device - * @param blob Device tree blob - * @return 0 if ok, -1 on error - */ -int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob) -{ - i2c_init(dev->max_frequency, dev->addr); - - return 0; -} +static struct dm_cros_ec_ops cros_ec_ops = { + .command = cros_ec_i2c_command, +}; + +static const struct udevice_id cros_ec_ids[] = { + { .compatible = "google,cros-ec" }, + { } +}; + +U_BOOT_DRIVER(cros_ec_i2c) = { + .name = "cros_ec", + .id = UCLASS_CROS_EC, + .of_match = cros_ec_ids, + .probe = cros_ec_probe, + .ops = &cros_ec_ops, +}; diff --git a/include/configs/snow.h b/include/configs/snow.h index 7eaa586..ce6676e 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -22,6 +22,7 @@ #define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ #define CONFIG_POWER_TPS65090_I2C +#define CONFIG_DM_CROS_EC #define CONFIG_BOARD_COMMON #define CONFIG_ARCH_EARLY_INIT_R |