diff options
51 files changed, 53 insertions, 12 deletions
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index d7b16da..1978269 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -91,13 +91,6 @@ #include <miiphy.h> #include <malloc.h> -/* - * Only compile for platform with AMCC EMAC ethernet controller and - * network support enabled. - * Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller! - */ -#if defined(CONFIG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480) - #if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) #error "CONFIG_MII has to be defined!" #endif @@ -2131,5 +2124,3 @@ int emac4xx_miiphy_initialize (bd_t * bis) return 0; } #endif /* !defined(CONFIG_NET_MULTI) */ - -#endif diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 463b575..adfe13c 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -38,6 +38,7 @@ COBJS += 44x_spd_ddr2.o ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION COBJS += 4xx_ibm_ddr2_autocalib.o endif +COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o COBJS += 4xx_pci.o COBJS += 4xx_pcie.o COBJS += bedbug_405.o diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 864774c..9f19269 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -67,6 +67,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index bcc85ee..a694083 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -56,6 +56,7 @@ #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index d58f508..d0e2464 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -52,6 +52,7 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 3493d75..1a2bc1c 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -52,6 +52,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 734ab95..e231fa7 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -54,6 +54,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 47ad89d..2319c58 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -54,6 +54,7 @@ #undef CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 4e94dfc..be8c238 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -53,6 +53,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index 2d60ebf..3263712 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -50,6 +50,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 1122d02..f1608e1 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -39,6 +39,8 @@ #define CONFIG_SYS_CLK_FREQ 25000000 #define CONFIG_BAUDRATE 9600 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* early setup for 405gp */ diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 0ff4f7d..884f3fe 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -52,6 +52,7 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 939e216..1d20efe 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -54,6 +54,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 508a0ca..729153c 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -253,6 +253,7 @@ int du440_phy_addr(int devnum); #endif +#define CONFIG_PPC4xx_EMAC #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR du440_phy_addr(0) /* PHY address */ diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index c05945a..1b766a7 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -93,6 +93,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index 9f5d3ca..1dd6e57 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -88,6 +88,7 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH +#define CONFIG_PPC4xx_EMAC #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 4341f02..d299044 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -80,6 +80,7 @@ #define CONFIG_NET_MULTI 1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY1_ADDR 1 /* PHY address */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 1e7cc12..80e59bb 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -64,6 +64,7 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 3e58424..b3c7046 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -54,6 +54,7 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 508b5c8..8aca1f9 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -132,6 +132,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 403081d..4b67c94 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -157,6 +157,7 @@ /*----------------------------------------------------------------------- * Networking *----------------------------------------------------------------------*/ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index c0ddd45..518173a 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -221,6 +221,7 @@ /*----------------------------------------------------------------------- * Networking *----------------------------------------------------------------------*/ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 7dcf185..c58ce05 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -336,6 +336,7 @@ /************************************************************ * Ethernet Stuff ***********************************************************/ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ #define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */ diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index ff11df9..32814d4 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -50,6 +50,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index a635fca..58e9328 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -50,6 +50,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index b55e383..0393366 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -63,6 +63,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 2966979..5c4d69b 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -278,6 +278,7 @@ /************************************************************ * Ethernet Stuff ***********************************************************/ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ /************************************************************ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 675dbe6..11ce008 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -54,6 +54,7 @@ #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 12e63b7..8d07d77 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -56,6 +56,7 @@ #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 7071ccb..7219bb8 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -315,6 +315,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index e66f8ef..09a9641 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -104,6 +104,7 @@ #undef CONFIG_EXT_PHY #define CONFIG_NET_MULTI 1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #ifndef CONFIG_EXT_PHY #define CONFIG_PHY_ADDR 1 /* EMAC0 PHY address */ diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index fb1febc..10ef620 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -55,6 +55,7 @@ #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index b6e3588..90efc6d 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -53,6 +53,7 @@ #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index e546369..51d0a0a 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -65,6 +65,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* disallow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 2260338..ca1a9d4 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -65,6 +65,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* disallow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index ec81564..01cdf3a 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -54,6 +54,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 569bb90..8d44ec6 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -167,6 +167,7 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address phy0 not populated */ #define CONFIG_PHY1_ADDR 1 /* PHY address phy1 not populated */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 3158412..6e9f5e5 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -198,6 +198,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 8516571..d3dc3e5 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -45,6 +45,7 @@ /* * Ethernet/EMAC/PHY */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII /* MII PHY management */ #define CONFIG_NET_MULTI #define CONFIG_NETCONSOLE /* include NetConsole support */ diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 393e992..874f2c0 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -180,6 +180,7 @@ * MII PHY configuration * */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index af38252..2e30e69 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -179,6 +179,7 @@ * MII PHY configuration * */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */ diff --git a/include/configs/korat.h b/include/configs/korat.h index ca3e8a9..d56da14 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -215,6 +215,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index e0dbd61..05055c8 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -326,6 +326,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ diff --git a/include/configs/netstal-common.h b/include/configs/netstal-common.h index 1fa4b00..0a75794 100644 --- a/include/configs/netstal-common.h +++ b/include/configs/netstal-common.h @@ -58,6 +58,7 @@ /* * Ethernet/EMAC/PHY */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ #if defined(CONFIG_440) diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 1dc8656..729ca6a 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -158,6 +158,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0x1c /* PHY address */ #define CONFIG_HAS_ETH1 diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 6e2d906..000ae5c 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -218,6 +218,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 /* required for netconsole */ #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 1a76301..0f7fca3 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -45,6 +45,7 @@ #define CONFIG_ENV_IS_IN_EEPROM #undef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_PPC4xx_EMAC #define CONFIG_NET_MULTI 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_MII 1 /* MII PHY management */ diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index d93ca2d..c156820 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -58,6 +58,7 @@ #define CONFIG_BOOTCOMMAND "version;echo;tftpboot ${loadaddr} ${loadfile};bootvx" /* autoboot command */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 44135df..d152a96 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -166,6 +166,8 @@ /* #define CONFIG_EEPRO100_SROM_WRITE */ /* #define CONFIG_SHOW_MAC */ #define CONFIG_EEPRO100 + +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* add 405GP MII PHY management */ #define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index b75e8a1..1a77c71 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -46,6 +46,7 @@ #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0x01 /* PHY address */ #define CONFIG_HAS_ETH1 1 @@ -153,7 +153,7 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx) mv6446x_eth_initialize(bis); #endif -#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000) +#if defined(CONFIG_PPC4xx_EMAC) ppc_4xx_eth_initialize(bis); #endif if (!eth_devices) { @@ -485,8 +485,7 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_AT91RM9200) at91rm9200_miiphy_initialize(bis); #endif -#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) \ - && !defined(CONFIG_AP1000) && !defined(CONFIG_405) +#if defined(CONFIG_PPC4xx_EMAC) emac4xx_miiphy_initialize(bis); #endif #if defined(CONFIG_MCF52x2) |