summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/nand_spl_simple.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/nand_spl_simple.c')
-rw-r--r--drivers/mtd/nand/nand_spl_simple.c98
1 files changed, 2 insertions, 96 deletions
diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
index 55f48d3..56e86d1 100644
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -209,102 +209,6 @@ static int nand_read_page(int block, int page, void *dst)
}
#endif
-#ifdef CONFIG_SPL_UBI
-/*
- * Temporary storage for non NAND page aligned and non NAND page sized
- * reads. Note: This does not support runtime detected FLASH yet, but
- * that should be reasonably easy to fix by making the buffer large
- * enough :)
- */
-static u8 scratch_buf[CONFIG_SYS_NAND_PAGE_SIZE];
-
-/**
- * nand_spl_read_block - Read data from physical eraseblock into a buffer
- * @block: Number of the physical eraseblock
- * @offset: Data offset from the start of @peb
- * @len: Data size to read
- * @dst: Address of the destination buffer
- *
- * This could be further optimized if we'd have a subpage read
- * function in the simple code. On NAND which allows subpage reads
- * this would spare quite some time to readout e.g. the VID header of
- * UBI.
- *
- * Notes:
- * @offset + @len are not allowed to be larger than a physical
- * erase block. No sanity check done for simplicity reasons.
- *
- * To support runtime detected flash this needs to be extended by
- * information about the actual flash geometry, but thats beyond the
- * scope of this effort and for most applications where fast boot is
- * required it is not an issue anyway.
- */
-int nand_spl_read_block(int block, int offset, int len, void *dst)
-{
- int page, read;
-
- /* Calculate the page number */
- page = offset / CONFIG_SYS_NAND_PAGE_SIZE;
-
- /* Offset to the start of a flash page */
- offset = offset % CONFIG_SYS_NAND_PAGE_SIZE;
-
- while (len) {
- /*
- * Non page aligned reads go to the scratch buffer.
- * Page aligned reads go directly to the destination.
- */
- if (offset || len < CONFIG_SYS_NAND_PAGE_SIZE) {
- nand_read_page(block, page, scratch_buf);
- read = min(len, CONFIG_SYS_NAND_PAGE_SIZE - offset);
- memcpy(dst, scratch_buf + offset, read);
- offset = 0;
- } else {
- nand_read_page(block, page, dst);
- read = CONFIG_SYS_NAND_PAGE_SIZE;
- }
- page++;
- len -= read;
- dst += read;
- }
- return 0;
-}
-#endif
-
-int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
-{
- unsigned int block, lastblock;
- unsigned int page;
-
- /*
- * offs has to be aligned to a page address!
- */
- block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
- lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
- page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
-
- while (block <= lastblock) {
- if (!nand_is_bad_block(block)) {
- /*
- * Skip bad blocks
- */
- while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
- nand_read_page(block, page, dst);
- dst += CONFIG_SYS_NAND_PAGE_SIZE;
- page++;
- }
-
- page = 0;
- } else {
- lastblock++;
- }
-
- block++;
- }
-
- return 0;
-}
-
/* nand_init() - initialize data to make nand usable by SPL */
void nand_init(void)
{
@@ -333,3 +237,5 @@ void nand_deselect(void)
if (nand_chip.select_chip)
nand_chip.select_chip(mtd, -1);
}
+
+#include "nand_spl_loaders.c"