diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/CPC45.h | 448 | ||||
| -rw-r--r-- | include/configs/CPU86.h | 6 | ||||
| -rw-r--r-- | include/configs/CU824.h | 6 | ||||
| -rw-r--r-- | include/configs/ELPT860.h | 390 | ||||
| -rw-r--r-- | include/configs/IP860.h | 14 | ||||
| -rw-r--r-- | include/configs/PM826.h | 14 | ||||
| -rw-r--r-- | include/configs/PN62.h | 2 | ||||
| -rw-r--r-- | include/configs/RRvision.h | 2 | ||||
| -rw-r--r-- | include/configs/SPD823TS.h | 2 | ||||
| -rw-r--r-- | include/configs/TQM823L.h | 2 | ||||
| -rw-r--r-- | include/configs/TQM850L.h | 2 | ||||
| -rw-r--r-- | include/configs/TQM855L.h | 2 | ||||
| -rw-r--r-- | include/configs/TQM860L.h | 2 | ||||
| -rw-r--r-- | include/configs/lwmon.h | 2 |
14 files changed, 869 insertions, 25 deletions
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h new file mode 100644 index 0000000..ed843d4 --- /dev/null +++ b/include/configs/CPC45.h @@ -0,0 +1,448 @@ +/* + * (C) Copyright 2001-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * + * Configuration settings for the CPC45 board. + * + */ + +/* ------------------------------------------------------------------------- */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC824X 1 +#define CONFIG_MPC8245 1 +#define CONFIG_CPC45 1 + + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ + +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_DHCP | \ + CFG_CMD_PCI | \ + 0 /* CFG_CMD_DATE */ ) + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) + */ +#include <cmd_confdefs.h> + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + +#if 1 +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#endif +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* Print Buffer Size + */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) + +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x00100000 /* Default load address */ + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ + +#define CFG_SDRAM_BASE 0x00000000 + +#if defined(CONFIG_BOOT_ROM) +#define CFG_FLASH_BASE 0xFF000000 +#else +#define CFG_FLASH_BASE 0xFF800000 +#endif + +#define CFG_RESET_ADDRESS 0xFFF00100 + +#define CFG_EUMB_ADDR 0xFCE00000 + +#define CFG_MONITOR_BASE TEXT_BASE + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ +#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ + + /* Maximum amount of RAM. + */ +#define CFG_MAX_RAM_SIZE 0x10000000 + + +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#undef CFG_RAMBOOT +#else +#define CFG_RAMBOOT +#endif + + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area + */ + + /* Size in bytes reserved for initial data + */ +#define CFG_GBL_DATA_SIZE 128 + +#define CFG_INIT_RAM_ADDR 0x40000000 +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL + +#define CFG_NS16550_REG_SIZE 1 + +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500) +#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600) +#define DUART_DCR (CFG_EUMB_ADDR + 0x4511) + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + * For the detail description refer to the MPC8240 user's manual. + */ + +#define CONFIG_SYS_CLK_FREQ 33000000 +#define CFG_HZ 1000 +/* + * SDRAM Configuration Settings + * Please note: currently only 64 and 128 MB SDRAM size supported + * set CFG_SDRAM_SIZE to 64 or 128 + * Memory configuration using SPD information stored on the SODIMMs + * not yet supported. + */ + +#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */ + + /* Bit-field values for MCCR1. + */ +#define CFG_ROMNAL 0 +#define CFG_ROMFAL 7 + +#if (CFG_SDRAM_SIZE == 64) /* 64 MB */ +#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */ +#elif (CFG_SDRAM_SIZE == 128) /* 128 MB */ +#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */ +#else +# error "SDRAM size not supported" +#endif +#define CFG_BANK1_ROW 0 +#define CFG_BANK2_ROW 0 +#define CFG_BANK3_ROW 0 +#define CFG_BANK4_ROW 0 +#define CFG_BANK5_ROW 0 +#define CFG_BANK6_ROW 0 +#define CFG_BANK7_ROW 0 + + /* Bit-field values for MCCR2. + */ +#define CFG_REFINT 430 /* Refresh interval */ + + /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. + */ +#define CFG_BSTOPRE 192 + + /* Bit-field values for MCCR3. + */ +#define CFG_REFREC 2 /* Refresh to activate interval */ +#define CFG_RDLAT 3 /* Data latancy from read command */ + + /* Bit-field values for MCCR4. + */ +#define CFG_PRETOACT 2 /* Precharge to activate interval */ +#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ +#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */ +#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ +#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ +#define CFG_ACTORW 2 +#define CFG_REGISTERD_TYPE_BUFFER 1 +#define CFG_EXTROM 1 +#define CFG_REGDIMM 0 + +/* Memory bank settings. + * Only bits 20-29 are actually used from these vales to set the + * start/end addresses. The upper two bits will always be 0, and the lower + * 20 bits will be 0x00000 for a start address, or 0xfffff for an end + * address. Refer to the MPC8240 book. + */ + +#define CFG_BANK0_START 0x00000000 +#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) +#define CFG_BANK0_ENABLE 1 +#define CFG_BANK1_START 0x3ff00000 +#define CFG_BANK1_END 0x3fffffff +#define CFG_BANK1_ENABLE 0 +#define CFG_BANK2_START 0x3ff00000 +#define CFG_BANK2_END 0x3fffffff +#define CFG_BANK2_ENABLE 0 +#define CFG_BANK3_START 0x3ff00000 +#define CFG_BANK3_END 0x3fffffff +#define CFG_BANK3_ENABLE 0 +#define CFG_BANK4_START 0x3ff00000 +#define CFG_BANK4_END 0x3fffffff +#define CFG_BANK4_ENABLE 0 +#define CFG_BANK5_START 0x3ff00000 +#define CFG_BANK5_END 0x3fffffff +#define CFG_BANK5_ENABLE 0 +#define CFG_BANK6_START 0x3ff00000 +#define CFG_BANK6_END 0x3fffffff +#define CFG_BANK6_ENABLE 0 +#define CFG_BANK7_START 0x3ff00000 +#define CFG_BANK7_END 0x3fffffff +#define CFG_BANK7_ENABLE 0 + +#define CFG_ODCR 0xff + +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) + +#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */ +#define INTEL_ID_28F160F3T 0x88F388F3 /* 16M = 1M x 16 top boot sector */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + + /* Warining: environment is not EMBEDDED in the ppcboot code. + * It's stored in flash separately. + */ +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7C0000) +#define CFG_ENV_SIZE 0x4000 /* Size of the Environment */ +#define CFG_ENV_OFFSET 0 /* starting right at the beginning */ +#define CFG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + +#define SRAM_BASE 0x80000000 /* SRAM base address */ +#define SRAM_END 0x801FFFFF + +/*---------------------------------------------------------------------*/ +/* CPC45 Memory Map */ +/*---------------------------------------------------------------------*/ +#define SRAM_BASE 0x80000000 /* SRAM base address */ +#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */ +#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ +#define BCSR_BASE 0x80600000 /* board control / status registers */ +#define DISPLAY_BASE 0x80600040 /* DISPLAY base */ +#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */ +#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ + + +/*---------------------------------------------------------------------*/ +/* CPC45 Control/Status Registers */ +/*---------------------------------------------------------------------*/ +#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00)) +#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01)) +#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02)) +#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03)) +#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04)) +#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05)) +#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06)) +#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06)) +#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06)) +#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07)) + +/* IRQ_ENA_1 bit definitions */ +#define I_ENA_1_IERA 0x80 /* INTA enable */ +#define I_ENA_1_IERB 0x40 /* INTB enable */ +#define I_ENA_1_IERC 0x20 /* INTC enable */ +#define I_ENA_1_IERD 0x10 /* INTD enable */ + +/* IRQ_STAT_1 bit definitions */ +#define I_STAT_1_INTA 0x80 /* INTA status */ +#define I_STAT_1_INTB 0x40 /* INTB status */ +#define I_STAT_1_INTC 0x20 /* INTC status */ +#define I_STAT_1_INTD 0x10 /* INTD status */ + +/* IRQ_ENA_2 bit definitions */ +#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */ +#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */ +#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */ +#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */ +#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */ +#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */ +#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */ +#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */ + +/* IRQ_STAT_2 bit definitions */ +#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */ +#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */ +#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */ +#define I_STAT_2_RTC 0x10 /* RTC IRQ status */ +#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */ +#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */ +#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */ +#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */ + +/* BOARD_CTRL bit definitions */ +#define USER_LEDS 2 /* 2 user LEDs */ + +#if (USER_LEDS == 4) +#define B_CTRL_WRSE 0x80 +#define B_CTRL_KRSE 0x40 +#define B_CTRL_FWRE 0x20 /* Flash write enable */ +#define B_CTRL_FWPT 0x10 /* Flash write protect */ +#define B_CTRL_LED3 0x08 /* LED 3 control */ +#define B_CTRL_LED2 0x04 /* LED 2 control */ +#define B_CTRL_LED1 0x02 /* LED 1 control */ +#define B_CTRL_LED0 0x01 /* LED 0 control */ +#else +#define B_CTRL_WRSE 0x80 +#define B_CTRL_KRSE 0x40 +#define B_CTRL_FWRE_1 0x20 /* Flash write enable */ +#define B_CTRL_FWPT_1 0x10 /* Flash write protect */ +#define B_CTRL_LED1 0x08 /* LED 1 control */ +#define B_CTRL_LED0 0x04 /* LED 0 control */ +#define B_CTRL_FWRE_0 0x02 /* Flash write enable */ +#define B_CTRL_FWPT_0 0x01 /* Flash write protect */ +#endif + +/* BOARD_STAT bit definitions */ +#define B_STAT_WDGE 0x80 +#define B_STAT_WDGS 0x40 +#define B_STAT_WRST 0x20 +#define B_STAT_KRST 0x10 +#define B_STAT_CSW3 0x08 /* sitch bit 3 status */ +#define B_STAT_CSW2 0x04 /* sitch bit 2 status */ +#define B_STAT_CSW1 0x02 /* sitch bit 1 status */ +#define B_STAT_CSW0 0x01 /* sitch bit 0 status */ + +/*---------------------------------------------------------------------*/ +/* Display addresses */ +/*---------------------------------------------------------------------*/ +#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */ +#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */ +#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */ + +#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */ +#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */ + +#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */ +#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */ +#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */ +#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */ +#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */ +#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */ +#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */ +#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */ + + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP + +#define CONFIG_NET_MULTI /* Multi ethernet cards support */ + +#define CONFIG_EEPRO100 + +#define PCI_ENET0_IOADDR 0x00104000 +#define PCI_ENET0_MEMADDR 0x82000000 +#define PCI_PLX9030_MEMADDR 0x82100000 +#endif /* __CONFIG_H */ diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index ae8525f..9712d47 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -171,7 +171,7 @@ CFG_CMD_EEPROM | \ CFG_CMD_DATE | \ CFG_CMD_I2C | \ - CFG_CMD_DOC) + CFG_CMD_DOC ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -329,8 +329,8 @@ #define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 #define CFG_EEPROM_PAGE_WRITE_BITS 4 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CFG_ENV_OFFSET 0 -#define CFG_ENV_SIZE 2048 +#define CFG_ENV_OFFSET 512 +#define CFG_ENV_SIZE (2048 - 512) #endif /* diff --git a/include/configs/CU824.h b/include/configs/CU824.h index ed38ef6..40ba25a 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -60,9 +60,10 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_BEDBUG | \ CFG_CMD_DHCP | \ CFG_CMD_PCI | \ - 0/* CFG_CMD_DATE */ ) + 0 /* CFG_CMD_DATE */ ) /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -302,4 +303,7 @@ #define CFG_ETH_DEV_FN 0x7800 #define CFG_ETH_IOBASE 0x00104000 +#define CONFIG_EEPRO100 +#define PCI_ENET0_IOADDR 0x00104000 +#define PCI_ENET0_MEMADDR 0x80000000 #endif /* __CONFIG_H */ diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h new file mode 100644 index 0000000..e9561b9 --- /dev/null +++ b/include/configs/ELPT860.h @@ -0,0 +1,390 @@ +/* +**===================================================================== +** +** Copyright (C) 2000, 2001, 2002, 2003 +** The LEOX team <team@leox.org>, http://www.leox.org +** +** LEOX.org is about the development of free hardware and software resources +** for system on chip. +** +** Description: U-Boot port on the LEOX's ELPT860 CPU board +** ~~~~~~~~~~~ +** +**===================================================================== +** +** This program is free software; you can redistribute it and/or +** modify it under the terms of the GNU General Public License as +** published by the Free Software Foundation; either version 2 of +** the License, or (at your option) any later version. +** +** This program is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +** +** You should have received a copy of the GNU General Public License +** along with this program; if not, write to the Free Software +** Foundation, Inc., 59 Temple Place, Suite 330, Boston, +** MA 02111-1307 USA +** +**===================================================================== +*/ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC860 1 /* It's a MPC860, in fact a 860T CPU */ +#define CONFIG_MPC860T 1 +#define CONFIG_ELPT860 1 /* ...on a LEOX's ELPT860 CPU board */ + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE + +#define CONFIG_CLOCKS_IN_MHZ 1 /* Clock passed to Linux (<2.4.5) in MHz */ +#define CONFIG_8xx_GCLK_FREQ 50000000 /* MPC860T runs at 50MHz */ + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ + +/* BOOT arguments */ +#define CONFIG_PREBOOT \ + "echo;" \ + "echo Type \"run nfsboot\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "rootargs=setenv rootpath /tftp/$(ipaddr)\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off panic=1\0" \ + "ramboot=tftp 400000 /home/paugaml/pMulti;" \ + "run ramargs;bootm\0" \ + "nfsboot=tftp 400000 /home/paugaml/uImage;" \ + "run rootargs;run nfsargs;run addip;bootm\0" \ + "" +#define CONFIG_BOOTCOMMAND "run ramboot" + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ +#undef CONFIG_RTC_MPC8xx /* internal RTC MPC8xx unused */ +#define CONFIG_RTC_DS164x 1 /* RTC is a Dallas DS1646 */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "LEOX_elpt860: " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x00100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Environment Variables and Storages + */ +#define CONFIG_ENV_OVERWRITE 1 /* Allow Overwrite of serial# & ethaddr */ + +#undef CFG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */ +#undef CFG_ENV_IS_IN_EEPROM /* Environment is in I2C EEPROM */ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment is in FLASH */ + +#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_ETHADDR 00:01:77:00:60:40 +#define CONFIG_IPADDR 192.168.0.30 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_SERVERIP 192.168.0.1 +#define CONFIG_GATEWAYIP 192.168.0.1 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFF000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x02000000 +#define CFG_NVRAM_BASE 0x03000000 + +#if defined(CFG_ENV_IS_IN_FLASH) +# if defined(DEBUG) +# define CFG_MONITOR_LEN (320 << 10) /* Reserve 320 kB for Monitor */ +# else +# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +# endif +#else +# if defined(DEBUG) +# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +# else +# define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +# endif +#endif + +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#if defined(CFG_ENV_IS_IN_FLASH) +# define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ +# define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#endif + +/*----------------------------------------------------------------------- + * NVRAM organization + */ +#define CFG_NVRAM_BASE_ADDR CFG_NVRAM_BASE /* Base address of NVRAM area */ +#define CFG_NVRAM_SIZE ((128*1024)-8) /* clock regs resident in the */ + /* 8 top NVRAM locations */ + +#if defined(CFG_ENV_IS_IN_NVRAM) +# define CFG_ENV_ADDR CFG_NVRAM_BASE /* Base address of NVRAM area */ +# define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP) +#else +# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC11) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC + * enabled + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit - leave PLL multiplication factor unchanged ! + */ +#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_TBS | \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) + +/*----------------------------------------------------------------------- + * Chip Selects + SDRAM timings + Memory Periodic Timer Prescaler + *----------------------------------------------------------------------- + * + */ +#ifdef DEBUG +# define CFG_DER 0xFFE7400F /* Debug Enable Register */ +#else +# define CFG_DER 0 +#endif + +/* + * Init Memory Controller: + * ~~~~~~~~~~~~~~~~~~~~~~ + * + * BR0 and OR0 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_PRELIM_OR_AM 0xFF000000 /* 16 MB between each CSx */ + +/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0 */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK) + +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) + +/* + * BR1 and OR1 (SDRAM) + * + */ +#define SDRAM_BASE1_PRELIM CFG_SDRAM_BASE /* SDRAM bank #0 */ +#define SDRAM_MAX_SIZE 0x02000000 /* 32 MB MAX for CS1 */ + +/* SDRAM timing: */ +#define CFG_OR_TIMING_SDRAM 0x00000000 + +#define CFG_OR1_PRELIM ((2 * CFG_PRELIM_OR_AM) | CFG_OR_TIMING_SDRAM ) +#define CFG_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +/* + * BR2 and OR2 (NVRAM) + * + */ +#define NVRAM_BASE1_PRELIM CFG_NVRAM_BASE /* NVRAM bank #0 */ +#define NVRAM_MAX_SIZE 0x00020000 /* 128 KB MAX for CS2 */ + +#define CFG_OR2_PRELIM 0xFFF80160 +#define CFG_BR2_PRELIM ((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) + +/* + * Memory Periodic Timer Prescaler + */ + +/* periodic timer for refresh */ +#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */ + +/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/*----------------------------------------------------------------------- + * Internal Definitions + *----------------------------------------------------------------------- + * + */ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + +#endif /* __CONFIG_H */ diff --git a/include/configs/IP860.h b/include/configs/IP860.h index 6fa2d19..d7dce71 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -35,6 +35,7 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_IP860 1 /* ...on a IP860 board */ +#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 9600 @@ -45,10 +46,6 @@ #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" \ "\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 $(filesize)\0" -#define CONFIG_ETHADDR 00:30:bf:01:02:d2 -#define CONFIG_IPADDR 10.0.0.5 -#define CONFIG_SERVERIP 10.0.0.2 - #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND \ "bootp; " \ @@ -230,10 +227,13 @@ SIUMCR_DBGC11 | SIUMCR_MLRC10) /*----------------------------------------------------------------------- - * Clock Setting - the IP860 has no 32kHz clock, so automatic detection fails + * Clock Setting - get clock frequency from Board Revision Register *----------------------------------------------------------------------- */ -#define CONFIG_8xx_GCLK_FREQ 50000000 +#ifndef __ASSEMBLY__ +extern unsigned long ip860_get_clk_freq (void); +#endif +#define CONFIG_8xx_GCLK_FREQ ip860_get_clk_freq() /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 @@ -430,6 +430,8 @@ typedef struct ip860_bcsr_s { unsigned char wd_trigger; /* +1A Watchdog trigger register */ unsigned char reservedD; unsigned char rmw_req; /* +1C RMW request register */ + unsigned char reservedE; + unsigned char bd_rev; /* +1E Board Revision register */ } ip860_bcsr_t; #endif /* __ASSEMBLY__ */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index b56da69..d95596c 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -158,9 +158,9 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_BEDBUG | \ CFG_CMD_DATE | \ + CFG_CMD_DOC | \ CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_DOC) + CFG_CMD_I2C ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -211,11 +211,11 @@ * Flash and Boot ROM mapping */ -#define CFG_BOOTROM_BASE 0x60000000 +#define CFG_BOOTROM_BASE 0xFF800000 #define CFG_BOOTROM_SIZE 0x00080000 -#define CFG_FLASH0_BASE 0x40000000 +#define CFG_FLASH0_BASE 0xFF000000 #define CFG_FLASH0_SIZE 0x02000000 -#define CFG_DOC_BASE 0x60000000 +#define CFG_DOC_BASE 0xFF800000 #define CFG_DOC_SIZE 0x00100000 @@ -245,8 +245,8 @@ #define CFG_I2C_EEPROM_ADDR_LEN 1 #define CFG_EEPROM_PAGE_WRITE_BITS 4 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CFG_ENV_OFFSET 0 -#define CFG_ENV_SIZE 2048 +#define CFG_ENV_OFFSET 512 +#define CFG_ENV_SIZE (2048 - 512) #endif /*----------------------------------------------------------------------- diff --git a/include/configs/PN62.h b/include/configs/PN62.h index 0750116..6c37208 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -70,7 +70,7 @@ "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ "ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \ "loadp 100000; bootm" - /* "tftpboot 100000 pImage; bootm" */ + /* "tftpboot 100000 uImage; bootm" */ #else /* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index ad36c95..acfe747 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -75,7 +75,7 @@ "setenv filesize;saveenv\0" \ "kernel_addr=40040000\0" \ "ramdisk_addr=40100000\0" \ - "kernel_img=/tftpboot/pImage\0" \ + "kernel_img=/tftpboot/uImage\0" \ "kernel_load=tftp 200000 $(kernel_img)\0" \ "net_nfs=run kernel_load nfsargs addip addtty;bootm\0" \ "flash_nfs=run nfsargs addip addtty;bootm $(kernel_addr)\0" \ diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index bbd5939..9ad1839 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -74,7 +74,7 @@ #define CONFIG_IPADDR 10.0.0.98 #define CONFIG_SERVERIP 10.0.0.1 #undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "tftp 200000 pImage;bootm 200000" +#define CONFIG_BOOTCOMMAND "tftp 200000 uImage;bootm 200000" /*----------------------------------------------------------------------*/ /* diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 6836326..cc51ce6 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -71,7 +71,7 @@ "bootm $(kernel_addr) $(ramdisk_addr)\0" \ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ - "bootfile=/tftpboot/TQM860L/pImage\0" \ + "bootfile=/tftpboot/TQM860L/uImage\0" \ "kernel_addr=40040000\0" \ "ramdisk_addr=40100000\0" \ "" diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 71e08ce..60aacfb 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -67,7 +67,7 @@ "bootm $(kernel_addr) $(ramdisk_addr)\0" \ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ - "bootfile=/tftpboot/TQM860L/pImage\0" \ + "bootfile=/tftpboot/TQM860L/uImage\0" \ "kernel_addr=40040000\0" \ "ramdisk_addr=40100000\0" \ "" diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index ac0e28a..37363a2 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -67,7 +67,7 @@ "bootm $(kernel_addr) $(ramdisk_addr)\0" \ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ - "bootfile=/tftpboot/TQM860L/pImage\0" \ + "bootfile=/tftpboot/TQM860L/uImage\0" \ "kernel_addr=40040000\0" \ "ramdisk_addr=40100000\0" \ "" diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 5564b23..0d0b8c3 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -67,7 +67,7 @@ "bootm $(kernel_addr) $(ramdisk_addr)\0" \ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ - "bootfile=/tftpboot/TQM860L/pImage\0" \ + "bootfile=/tftpboot/TQM860L/uImage\0" \ "kernel_addr=40040000\0" \ "ramdisk_addr=40100000\0" \ "" diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 66c7935..fa46600 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -97,7 +97,7 @@ "bootm $(kernel_addr)\0" \ "flash_self=run ramargs addip add_wdt addfb add_misc;" \ "bootm $(kernel_addr) $(ramdisk_addr)\0" \ - "net_nfs=tftp 100000 /tftpboot/pImage.lwmon;" \ + "net_nfs=tftp 100000 /tftpboot/uImage.lwmon;" \ "run nfsargs addip add_wdt addfb;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "load=tftp 100000 /tftpboot/u-boot.bin\0" \ |