summaryrefslogtreecommitdiff
path: root/lib/efi_loader
AgeCommit message (Collapse)Author
2017-03-14efi: Add a hook to allow adding memory mappingYork Sun
Instead of adding all memory banks, add a hook so individual SoC/board can has its own implementation. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alexander Graf <agraf@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2017-01-28disk: convert CONFIG_ISO_PARTITION to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-09lib: gitignore *.elf and *.so generated by efi_loaderLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-11-27efi_loader: Allow to compile helloworld.efi w/o bundling itAlexander Graf
Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-17ls2080: Exit dpaa only right before exiting U-BootAlexander Graf
On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com> [agraf: Fix x86 build]
2016-11-14x86: Enable EFI loader supportSimon Glass
Enable this so that EFI applications (notably grub) can be run under U-Boot on x86 platforms. At present the 'hello world' EFI application is not supported for the qemu-x86_efi_payload64 board. That board builds a payload consisting of a 64-bit header and a 32-bit U-Boot, which is incompatible with the way the EFI loader builds its EFI application. The following error is obtained: x86_64-linux-ld.bfd: i386 architecture of input file `lib/efi_loader/helloworld.o' is incompatible with i386:x86-64 output This could be corrected with additional Makefile rules. For now, this feature is disabled for that board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [agraf: drop hello kconfig bits] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Add support for a hello world test programSimon Glass
It is useful to have a basic sanity check for EFI loader support. Add a 'bootefi hello' command which loads HelloWord.efi and runs it under U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Fix documentation, add unfulfilled kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Correct cache flush alignmentSimon Glass
Make sure that the cache flushes correctly by ensuring that the end address is correctly aligned. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi_loader: console: Correctly report modesEmmanuel Vadot
Add support for EFI console modes. Mode 0 is always 80x25 and present by EFI specification. Mode 1 is always 80x50 and not mandatory. Mode 2 and above is freely usable. If the terminal can handle mode 1, we mark it as supported. If the terminal size is greater than mode 0 and different than mode 1, we install it as mode 2. Modes can be switch with cout_set_mode. Changes in V5: Correctly detect mode before enabling mode 2. Changes in V4: Reset cursor positon on mode switch Use local variables in console query code Changes in V3: Valid mode are 0 to EFIMode-1 Fix style Changes in V2: Add mode switch Report only the modes that we support Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Use device device path type Messaging for network interface nodeOleksandr Tymoshenko
When adding network interface node use Messaging device path with subtype MAC Address and device's MAC address as a value instead of Media Device path type with subtype File Path and path "Net" Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi_loader: fix depends on line of EFI_LOADERMasahiro Yamada
This line is shown as depends on (ARM64 ||\302\240ARM) && OF_LIBFDT on my Emacs. Use ASCII characters only. Assuming it is (ARM64 || ARM), remove the redundancy. Unlike Linux, CONFIG_ARM includes CONFIG_ARM64 in U-Boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19efi_loader: Rename EFI_RUNTIME_{TEXT, DATA} to __efi_runtime{, _data}Alexander Graf
Compiler attributes are more commonly __foo style tags rather than big upper case eye sores like EFI_RUNTIME_TEXT. Simon Glass felt quite strongly about this, so this patch converts our existing defines over to more eye friendly ones. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19x86: efi: Add EFI loader support for x86Simon Glass
Add the required pieces to support the EFI loader on x86. Since U-Boot only builds for 32-bit on x86, only a 32-bit EFI application is supported. If a 64-bit kernel must be booted, U-Boot supports this directly using FIT (see doc/uImage.FIT/kernel.its). U-Boot can act as a payload for both 32-bit and 64-bit EFI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19efi: Fix missing EFIAPI specifiersSimon Glass
These are missing in some functions. Add them to keep things consistent. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19efi_loader: Fix efi_install_configuration_tableAlexander Graf
So far we were only installing the FDT table and didn't have space to store any other. Hence nobody realized that our efi table allocation was broken in that it didn't set the indicator for the number of tables plus one. This patch fixes it, allowing code to allocate new efi tables. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19smbios: Expose in efi_loader as tableAlexander Graf
We can pass SMBIOS easily as EFI configuration table to an EFI payload. This patch adds enablement for that case. While at it, we also enable SMBIOS generation for ARM systems, since they support EFI_LOADER. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19efi_loader: Expose efi_install_configuration_tableAlexander Graf
We want to be able to add configuration table entries from our own code as well as from EFI payload code. Export the boot service function internally too, so that we can reuse it. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19efi_loader: gop: Expose fb when 32bppAlexander Graf
When we're running in 32bpp mode, expose the frame buffer address to our payloads so that Linux efifb can pick it up. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19efi_loader: Allow bouncing for networkAlexander Graf
So far bounce buffers were only used for disk I/O, but network I/O may suffer from the same problem. On platforms that have problems doing DMA on high addresses, let's also bounce outgoing network packets. Incoming ones always already get bounced. This patch fixes EFI PXE boot on ZynqMP for me. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Allow boards to implement get_time and reset_systemAlexander Graf
EFI allows an OS to leverage firmware drivers while the OS is running. In the generic code we so far had to stub those implementations out, because we would need board specific knowledge about MMIO setups for it. However, boards can easily implement those themselves. This patch provides the framework so that a board can implement its own versions of get_time and reset_system which would actually do something useful. While at it we also introduce a simple way for code to reserve MMIO pointers as runtime available. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Do not leak memory when unlinking a mappingStefan Brüns
As soon as a mapping is unlinked from the list, there are no further references to it, so it should be freed. If it not unlinked, update the start address and length. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Keep memory mapping sorted when splitting an entryStefan Brüns
The code assumes sorted mappings in descending address order. When splitting a mapping, insert the new part next to the current mapping. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Readd freed pages to memory poolStefan Brüns
Currently each allocation creates a new mapping. Readding the mapping as free memory (EFI_CONVENTIONAL_MEMORY) potentially allows to hand out an existing mapping, thus limiting the number of mapping descriptors in the memory map. Mitigates a problem with current (4.8rc7) linux kernels when doing an efi_get_memory map, resulting in an infinite loop. Space for the memory map is reserved with allocate_pool (implicitly creating a new mapping) and filled. If there is insufficient slack space (8 entries) in the map, the space is freed and a new round is started, with space for one more entry. As each round increases requirement and allocation by exactly one, there is never enough slack space. (At least 32 entries are allocated, so as long as there are less than 24 entries, there is enough slack). Earlier kernels reserved no slack, and did less allocations, so this problem was not visible. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Track size of pool allocations to allow freeingStefan Brüns
We need a functional free_pool implementation, as otherwise each allocate_pool causes growth of the memory descriptor table. Different to free_pages, free_pool does not provide the size for the to be freed allocation, thus we have to track the size ourselves. As the only EFI requirement for pool allocation is an alignment of 8 bytes, we can keep allocating a range using the page allocator, reserve the first 8 bytes for our bookkeeping and hand out the remainder to the caller. This saves us from having to use any independent data structures for tracking. To simplify the conversion between pool allocations and the corresponding page allocation, we create an auxiliary struct efi_pool_allocation. Given the allocation size free_pool size can handoff freeing the page range, which was indirectly allocated by a call to allocate_pool, to free_pages. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Move efi_allocate_pool implementation to efi_memory.cStefan Brüns
We currently handle efi_allocate_pool() in our boot time service file. In the following patch, pool allocation will receive additional internal semantics that we should preserve inside efi_memory.c instead. As foundation for those changes, split the function into an externally facing efi_allocate_pool_ext() for use by payloads and an internal helper efi_allocate_pool() in efi_memory.c that handles the actual allocation. While at it, change the magic 0xfff / 12 constants to the more obvious EFI_PAGE_MASK/SHIFT defines. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Fix crash on 32-bit systemsRobin Randhawa
A type mismatch in the efi_allocate_pool boot service flow causes hazardous memory scribbling on 32-bit systems. This is efi_allocate_pool's prototype: static efi_status_t EFIAPI efi_allocate_pool(int pool_type, unsigned long size, void **buffer); Internally, it invokes efi_allocate_pages as follows: efi_allocate_pages(0, pool_type, (size + 0xfff) >> 12, (void*)buffer); This is efi_allocate_pages' prototype: efi_status_t efi_allocate_pages(int type, int memory_type, unsigned long pages, uint64_t *memory); The problem: efi_allocate_pages does this internally: *memory = addr; This fix in efi_allocate_pool uses a transitional uintptr_t cast to ensure the correct outcome, irrespective of the system's native word size. This was observed when bootefi'ing the EFI instance of FreeBSD's first stage bootstrap (boot1.efi) on a 32-bit ARM platform (Qemu VExpress + Cortex-a9). Signed-off-by: Robin Randhawa <robin.randhawa@arm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Fix memory map size check to avoid out-of-bounds accessStefan Brüns
The current efi_get_memory_map() function overwrites the map_size property before reading its value. That way the sanity check whether our memory map fits into the given array always succeeds, potentially overwriting arbitrary payload memory. This patch moves the property update write after its sanity check, so that the check actually verifies the correct value. So far this has not triggered any known bugs, but we're better off safe than sorry. If the buffer is to small, the returned memory_map_size indicates the required size to the caller. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-18efi_loader: Update description of internal efi_mem_carve_outStefan Brüns
In 74c16acce30bb882ad5951829d8dafef8eea564c the return values where changed, but the description was kept. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-08arm: Add return value argument to longjmpAlexander Graf
The normal longjmp command allows for a caller to pass the return value of the setjmp() invocation. This patch adds that semantic to the arm implementation of it and adjusts the efi_loader call respectively. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-07efi_loader: provide efi_mem_desc versionMian Yousaf Kaukab
Provide version of struct efi_mem_desc in efi_get_memory_map(). EFI_BOOT_SERVICES.GetMemoryMap() in UEFI specification v2.6 defines memory descriptor version to 1. Linux kernel also expects descriptor version to be 1 and prints following warning during boot if its not: Unexpected EFI_MEMORY_DESCRIPTOR version 0 Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@gmail.com>
2016-08-20efi_loader: Fix relocations above 64kb image sizeAlexander Graf
We were truncating the image offset within the target image to 16 bits which again meant that we were potentially overwriting random memory in the lower 16 bits of the image. This patch casts the offset to a more reasonable 32bits. With this applied, I can successfully see Shell.efi assert because it can't find a protocol it expects to be available. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-08-08efi_loader: disk: Sanitize exposed devicesAlexander Graf
When a target device is 0 bytes long, there's no point in exposing it to the user. Let's just skip them. Also, when an offset is passed into the efi disk creation, we should remove this offset from the total number of sectors we can handle. This patch fixes both things. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-08-08efi_loader: disk: Fix CONFIG_BLK breakageAlexander Graf
When using CONFIG_BLK, there were 2 issues: 1) The name we generate the device with has to match the name we set in efi_set_bootdev() 2) The device we pass into our block functions was wrong, we should not rediscover it but just use the already known pointer. This patch fixes both issues. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-07-22efi_loader: Add debug output for efi_add_memory_map()Andreas Färber
Tracing the arguments has been helpful for pinpointing overflows. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2016-06-06efi_loader: Add DM_VIDEO supportAlexander Graf
Some systems are starting to shift to support DM_VIDEO which exposes the frame buffer through a slightly different interface. This is a poor man's effort to support the dm video interface instead of the lcd one. We still only support a single display device. Signed-off-by: Alexander Graf <agraf@suse.de> [trini: Remove fb_size / fb_base as they were not used] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-06efi_loader: Don't allocate from memory holesAlexander Graf
When a payload calls our memory allocator with the exact address hint, we happily allocate memory from completely unpopulated regions. Payloads however expect this to only succeed if they would be allocating from free conventional memory. This patch makes the logic behind those checks a bit more obvious and ensures that we always allocate from known good free conventional memory regions if we want to allocate ram. Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-06efi_loader: Move to normal debug infrastructureAlexander Graf
We introduced special "DEBUG_EFI" defines when the efi loader support was new. After giving it a bit of thought, turns out we really didn't have to - the normal #define DEBUG infrastructure works well enough for efi loader as well. So this patch switches to the common debug() and #define DEBUG way of printing debug information. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-06efi_loader: Add exit supportAlexander Graf
Some times you may want to exit an EFI payload again, for example to default boot into a PXE installation and decide that you would rather want to boot from the local disk instead. This patch adds exit functionality to the EFI implementation, allowing EFI payloads to exit. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-28Merge git://git.denx.de/u-boot-dmTom Rini
For odroid-c2 (arch-meson) for now disable designware eth as meson now needs to do some harder GPIO work. Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: lib/efi_loader/efi_disk.c Modified: configs/odroid-c2_defconfig
2016-05-27efi_loader: gop: Don't expose fb addressAlexander Graf
Recently Linux is gaining support for efifb on AArch64 and that support actually tries to make use of the frame buffer address we expose to it via gop. While this wouldn't be bad in theory, in practice it means a few bad things 1) We expose 16bit frame buffers as 32bit today 2) Linux can't deal with overlapping non-PCI regions between efifb and a different frame buffer driver For now, let's just disable exposure of the frame buffer address. Most OSs that get booted will have a native driver for the GPU anyway. Signed-off-by: Alexander Graf <agraf@suse.de> [trini: Remove line_len entirely] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27efi_loader: Clean up system table on exitAlexander Graf
We put the system table into our runtime services data section so that payloads may still access it after exit_boot_services. However, most fields in it are quite useless once we're in that state, so let's just patch them out. With this patch we don't get spurious warnings when running EFI binaries anymore. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27efi_loader: Add bounce buffer supportAlexander Graf
Some hardware that is supported by U-Boot can not handle DMA above 32bits. For these systems, we need to come up with a way to expose the disk interface in a safe way. This patch implements EFI specific bounce buffers. For non-EFI cases, this apparently was no issue so far, since we can just define our environment variables conveniently. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27dm: efi: Update for CONFIG_BLKSimon Glass
This code does not currently build with driver model enabled for block devices. Update it to correct this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexander Graf <agraf@suse.de>
2016-05-27efi_loader: Add network access supportAlexander Graf
We can now successfully boot EFI applications from disk, but users may want to also run them from a PXE setup. This patch implements rudimentary network support, allowing a payload to send and receive network packets. With this patch, I was able to successfully run grub2 with network access inside of QEMU's -M xlnx-ep108. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-17dm: part: Drop the block_drvr tableSimon Glass
This is not needed since we can use the functions provided by the legacy block device support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-04-18efi_loader: Handle memory overflowsAndreas Färber
jetson-tk1 has 2 GB of RAM at 0x80000000, causing gd->ram_top to be zero. Handle this by either avoiding ram_top or by using the same type as ram_top to reverse the overflow effect. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2016-04-18efi_loader: Expose ascending efi memory mapAlexander Graf
The EFI memory map does not need to be in a strict order, but 32bit grub2 does expect it to be ascending. If it's not, it may try to allocate memory inside the U-Boot data memory region. We already sort the memory map in descending order, so let's just reverse it when we pass it to a payload. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Andreas Färber <afaerber@suse.de>
2016-04-18efi_loader: Always flush in cache line size granularityAlexander Graf
The cache line flush helpers only work properly when they get aligned start and end addresses. Round our flush range to cache line size. It's safe because we're guaranteed to flush within a single page which has the same cache attributes. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Andreas Färber <afaerber@suse.de>
2016-04-18efi_loader: Increase path string to 32 charactersAlexander Graf
Whenever we want to tell our payload about a path, we limit ourselves to a reasonable amount of characters. So far we only passed in device names - exceeding 16 chars was unlikely there. However by now we also pass real file path information, so let's increase the limit to 32 characters. That way common paths like "boot/efi/bootaa64.efi" fit just fine. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18efi_loader: Add el torito supportAlexander Graf
When loading an el torito image, uEFI exposes said image as a raw block device to the payload. Let's do the same by creating new block devices with added offsets for the respective el torito partitions. Signed-off-by: Alexander Graf <agraf@suse.de>