From ba4e159f9804c02a87ed38be0ed669a348d78f25 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 12 Sep 2016 11:38:36 -0300 Subject: wandboard: Fix hang when going into low frequency A kernel hang is observed when running wandboard 3.14 kernel and going to the lowest operational point of cpufreq: # ifconfig eth0 down # echo 1 > /sys/class/graphics/fb0/blank The problem is caused by incorrect setting of the REFR field of register MDREF. Setting it to 4 refresh commands per refresh cycle fixes the hang. Signed-off-by: Fabio Estevam diff --git a/board/wandboard/spl.c b/board/wandboard/spl.c index c513b22..a21a3d0 100644 --- a/board/wandboard/spl.c +++ b/board/wandboard/spl.c @@ -188,7 +188,7 @@ static struct mx6_ddr_sysinfo mem_q = { .rst_to_cke = 0x23, .sde_to_rst = 0x10, .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ + .refr = 3, /* 4 refresh commands per refresh cycle */ }; static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = { @@ -231,7 +231,7 @@ static struct mx6_ddr_sysinfo mem_dl = { .rst_to_cke = 0x23, .sde_to_rst = 0x10, .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ + .refr = 3, /* 4 refresh commands per refresh cycle */ }; /* DDR 32bit 512MB */ @@ -250,7 +250,7 @@ static struct mx6_ddr_sysinfo mem_s = { .rst_to_cke = 0x23, .sde_to_rst = 0x10, .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ + .refr = 3, /* 4 refresh commands per refresh cycle */ }; static void ccgr_init(void) -- cgit v0.10.2 From 5cca52a4cad8461457d938512829eeb9c68377ff Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 12 Sep 2016 12:01:47 -0300 Subject: wandboard: Remove videoargs script The videoargs script is kernel version dependent and since wandboard uses distro config, there is no need to handle videoargs locally. In case such video related settings are needed, then the proper location would be the distro extlinux.conf or boot.scr files. So remove 'videoargs' script. Signed-off-by: Fabio Estevam diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 69d0fd5..999ee6d 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -116,32 +116,6 @@ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ "fi; " \ "fi\0" \ - "videoargs=" \ - "setenv nextcon 0; " \ - "if hdmidet; then " \ - "setenv bootargs ${bootargs} " \ - "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ - "if=RGB24; " \ - "setenv fbmen fbmem=28M; " \ - "setexpr nextcon ${nextcon} + 1; " \ - "else " \ - "echo - no HDMI monitor;" \ - "fi; " \ - "i2c dev 1; " \ - "if i2c probe 0x10; then " \ - "setenv bootargs ${bootargs} " \ - "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ - "if=RGB666,bpp=32; " \ - "if test 0 -eq ${nextcon}; then " \ - "setenv fbmem fbmem=10M; " \ - "else " \ - "setenv fbmem ${fbmem},10M; " \ - "fi; " \ - "setexpr nextcon ${nextcon} + 1; " \ - "else " \ - "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ - "fi; " \ - "setenv bootargs ${bootargs} ${fbmem}\0" \ "findfdt="\ "if test $board_name = C1 && test $board_rev = MX6Q ; then " \ "setenv fdtfile imx6q-wandboard.dtb; fi; " \ -- cgit v0.10.2 From 3b30eece271cfc4096c2d20048c89e8bed0bbbfd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 26 Sep 2016 09:14:25 -0300 Subject: mx6sabresd: Make SPL DDR configuration to match the DCD table When using SPL on i.mx6 we frequently notice some DDR initialization mismatches between the SPL code and the non-SPL code. This causes stability issues like the ones reported at 7dbda25ecd6d7c ("mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang") and also: http://lists.denx.de/pipermail/u-boot/2016-September/266355.html . As the non-SPL code have been tested for long time and proves to be reliable, let's configure the DDR in the exact same way as the non-SPL case. The idea is simple: just use the DCD table and write directly to the DDR registers. Retrieved the DCD tables from: board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg and board/freescale/mx6sabresd/mx6qp.cfg (NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga) This method makes it easier for people converting from non-SPL to SPL code. Other benefit is that the SPL binary size is reduced from 44 kB to 39.9 kB. Signed-off-by: Fabio Estevam diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 0e9b506..e58c03c 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -682,125 +682,6 @@ int checkboard(void) #include #include -const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = { - .dram_sdclk_0 = 0x00020030, - .dram_sdclk_1 = 0x00020030, - .dram_cas = 0x00020030, - .dram_ras = 0x00020030, - .dram_reset = 0x00020030, - .dram_sdcke0 = 0x00003000, - .dram_sdcke1 = 0x00003000, - .dram_sdba2 = 0x00000000, - .dram_sdodt0 = 0x00003030, - .dram_sdodt1 = 0x00003030, - .dram_sdqs0 = 0x00000030, - .dram_sdqs1 = 0x00000030, - .dram_sdqs2 = 0x00000030, - .dram_sdqs3 = 0x00000030, - .dram_sdqs4 = 0x00000030, - .dram_sdqs5 = 0x00000030, - .dram_sdqs6 = 0x00000030, - .dram_sdqs7 = 0x00000030, - .dram_dqm0 = 0x00020030, - .dram_dqm1 = 0x00020030, - .dram_dqm2 = 0x00020030, - .dram_dqm3 = 0x00020030, - .dram_dqm4 = 0x00020030, - .dram_dqm5 = 0x00020030, - .dram_dqm6 = 0x00020030, - .dram_dqm7 = 0x00020030, -}; - -const struct mx6dq_iomux_ddr_regs mx6dqp_ddr_ioregs = { - .dram_sdclk_0 = 0x00000030, - .dram_sdclk_1 = 0x00000030, - .dram_cas = 0x00000030, - .dram_ras = 0x00000030, - .dram_reset = 0x00000030, - .dram_sdcke0 = 0x00003000, - .dram_sdcke1 = 0x00003000, - .dram_sdba2 = 0x00000000, - .dram_sdodt0 = 0x00003030, - .dram_sdodt1 = 0x00003030, - .dram_sdqs0 = 0x00000030, - .dram_sdqs1 = 0x00000030, - .dram_sdqs2 = 0x00000030, - .dram_sdqs3 = 0x00000030, - .dram_sdqs4 = 0x00000030, - .dram_sdqs5 = 0x00000030, - .dram_sdqs6 = 0x00000030, - .dram_sdqs7 = 0x00000030, - .dram_dqm0 = 0x00000030, - .dram_dqm1 = 0x00000030, - .dram_dqm2 = 0x00000030, - .dram_dqm3 = 0x00000030, - .dram_dqm4 = 0x00000030, - .dram_dqm5 = 0x00000030, - .dram_dqm6 = 0x00000030, - .dram_dqm7 = 0x00000030, -}; - -const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = { - .grp_ddr_type = 0x000C0000, - .grp_ddrmode_ctl = 0x00020000, - .grp_ddrpke = 0x00000000, - .grp_addds = 0x00000030, - .grp_ctlds = 0x00000030, - .grp_ddrmode = 0x00020000, - .grp_b0ds = 0x00000030, - .grp_b1ds = 0x00000030, - .grp_b2ds = 0x00000030, - .grp_b3ds = 0x00000030, - .grp_b4ds = 0x00000030, - .grp_b5ds = 0x00000030, - .grp_b6ds = 0x00000030, - .grp_b7ds = 0x00000030, -}; - -const struct mx6_mmdc_calibration mx6_mmcd_calib = { - .p0_mpwldectrl0 = 0x001F001F, - .p0_mpwldectrl1 = 0x001F001F, - .p1_mpwldectrl0 = 0x00440044, - .p1_mpwldectrl1 = 0x00440044, - .p0_mpdgctrl0 = 0x434B0350, - .p0_mpdgctrl1 = 0x034C0359, - .p1_mpdgctrl0 = 0x434B0350, - .p1_mpdgctrl1 = 0x03650348, - .p0_mprddlctl = 0x4436383B, - .p1_mprddlctl = 0x39393341, - .p0_mpwrdlctl = 0x35373933, - .p1_mpwrdlctl = 0x48254A36, -}; - -const struct mx6_mmdc_calibration mx6dqp_mmcd_calib = { - .p0_mpwldectrl0 = 0x001B001E, - .p0_mpwldectrl1 = 0x002E0029, - .p1_mpwldectrl0 = 0x001B002A, - .p1_mpwldectrl1 = 0x0019002C, - .p0_mpdgctrl0 = 0x43240334, - .p0_mpdgctrl1 = 0x0324031A, - .p1_mpdgctrl0 = 0x43340344, - .p1_mpdgctrl1 = 0x03280276, - .p0_mprddlctl = 0x44383A3E, - .p1_mprddlctl = 0x3C3C3846, - .p0_mpwrdlctl = 0x2E303230, - .p1_mpwrdlctl = 0x38283E34, -}; - -/* MT41K128M16JT-125 */ -static struct mx6_ddr3_cfg mem_ddr = { - .mem_speed = 1600, - .density = 2, - .width = 16, - .banks = 8, - .rowaddr = 14, - .coladdr = 10, - .pagesz = 2, - .trcd = 1375, - .trcmin = 4875, - .trasmin = 3500, -}; - static void ccgr_init(void) { struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -831,44 +712,209 @@ static void gpr_init(void) } } -/* - * This section requires the differentiation between iMX6 Sabre boards, but - * for now, it will configure only for the mx6q variant. - */ -static void spl_dram_init(void) +static int mx6q_dcd_table[] = { + 0x020e0798, 0x000C0000, + 0x020e0758, 0x00000000, + 0x020e0588, 0x00000030, + 0x020e0594, 0x00000030, + 0x020e056c, 0x00000030, + 0x020e0578, 0x00000030, + 0x020e074c, 0x00000030, + 0x020e057c, 0x00000030, + 0x020e058c, 0x00000000, + 0x020e059c, 0x00000030, + 0x020e05a0, 0x00000030, + 0x020e078c, 0x00000030, + 0x020e0750, 0x00020000, + 0x020e05a8, 0x00000030, + 0x020e05b0, 0x00000030, + 0x020e0524, 0x00000030, + 0x020e051c, 0x00000030, + 0x020e0518, 0x00000030, + 0x020e050c, 0x00000030, + 0x020e05b8, 0x00000030, + 0x020e05c0, 0x00000030, + 0x020e0774, 0x00020000, + 0x020e0784, 0x00000030, + 0x020e0788, 0x00000030, + 0x020e0794, 0x00000030, + 0x020e079c, 0x00000030, + 0x020e07a0, 0x00000030, + 0x020e07a4, 0x00000030, + 0x020e07a8, 0x00000030, + 0x020e0748, 0x00000030, + 0x020e05ac, 0x00000030, + 0x020e05b4, 0x00000030, + 0x020e0528, 0x00000030, + 0x020e0520, 0x00000030, + 0x020e0514, 0x00000030, + 0x020e0510, 0x00000030, + 0x020e05bc, 0x00000030, + 0x020e05c4, 0x00000030, + 0x021b0800, 0xa1390003, + 0x021b080c, 0x001F001F, + 0x021b0810, 0x001F001F, + 0x021b480c, 0x001F001F, + 0x021b4810, 0x001F001F, + 0x021b083c, 0x43270338, + 0x021b0840, 0x03200314, + 0x021b483c, 0x431A032F, + 0x021b4840, 0x03200263, + 0x021b0848, 0x4B434748, + 0x021b4848, 0x4445404C, + 0x021b0850, 0x38444542, + 0x021b4850, 0x4935493A, + 0x021b081c, 0x33333333, + 0x021b0820, 0x33333333, + 0x021b0824, 0x33333333, + 0x021b0828, 0x33333333, + 0x021b481c, 0x33333333, + 0x021b4820, 0x33333333, + 0x021b4824, 0x33333333, + 0x021b4828, 0x33333333, + 0x021b08b8, 0x00000800, + 0x021b48b8, 0x00000800, + 0x021b0004, 0x00020036, + 0x021b0008, 0x09444040, + 0x021b000c, 0x555A7975, + 0x021b0010, 0xFF538F64, + 0x021b0014, 0x01FF00DB, + 0x021b0018, 0x00001740, + 0x021b001c, 0x00008000, + 0x021b002c, 0x000026d2, + 0x021b0030, 0x005A1023, + 0x021b0040, 0x00000027, + 0x021b0000, 0x831A0000, + 0x021b001c, 0x04088032, + 0x021b001c, 0x00008033, + 0x021b001c, 0x00048031, + 0x021b001c, 0x09408030, + 0x021b001c, 0x04008040, + 0x021b0020, 0x00005800, + 0x021b0818, 0x00011117, + 0x021b4818, 0x00011117, + 0x021b0004, 0x00025576, + 0x021b0404, 0x00011006, + 0x021b001c, 0x00000000, +}; + +static int mx6qp_dcd_table[] = { + 0x020e0798, 0x000c0000, + 0x020e0758, 0x00000000, + 0x020e0588, 0x00000030, + 0x020e0594, 0x00000030, + 0x020e056c, 0x00000030, + 0x020e0578, 0x00000030, + 0x020e074c, 0x00000030, + 0x020e057c, 0x00000030, + 0x020e058c, 0x00000000, + 0x020e059c, 0x00000030, + 0x020e05a0, 0x00000030, + 0x020e078c, 0x00000030, + 0x020e0750, 0x00020000, + 0x020e05a8, 0x00000030, + 0x020e05b0, 0x00000030, + 0x020e0524, 0x00000030, + 0x020e051c, 0x00000030, + 0x020e0518, 0x00000030, + 0x020e050c, 0x00000030, + 0x020e05b8, 0x00000030, + 0x020e05c0, 0x00000030, + 0x020e0774, 0x00020000, + 0x020e0784, 0x00000030, + 0x020e0788, 0x00000030, + 0x020e0794, 0x00000030, + 0x020e079c, 0x00000030, + 0x020e07a0, 0x00000030, + 0x020e07a4, 0x00000030, + 0x020e07a8, 0x00000030, + 0x020e0748, 0x00000030, + 0x020e05ac, 0x00000030, + 0x020e05b4, 0x00000030, + 0x020e0528, 0x00000030, + 0x020e0520, 0x00000030, + 0x020e0514, 0x00000030, + 0x020e0510, 0x00000030, + 0x020e05bc, 0x00000030, + 0x020e05c4, 0x00000030, + 0x021b0800, 0xa1390003, + 0x021b080c, 0x001b001e, + 0x021b0810, 0x002e0029, + 0x021b480c, 0x001b002a, + 0x021b4810, 0x0019002c, + 0x021b083c, 0x43240334, + 0x021b0840, 0x0324031a, + 0x021b483c, 0x43340344, + 0x021b4840, 0x03280276, + 0x021b0848, 0x44383A3E, + 0x021b4848, 0x3C3C3846, + 0x021b0850, 0x2e303230, + 0x021b4850, 0x38283E34, + 0x021b081c, 0x33333333, + 0x021b0820, 0x33333333, + 0x021b0824, 0x33333333, + 0x021b0828, 0x33333333, + 0x021b481c, 0x33333333, + 0x021b4820, 0x33333333, + 0x021b4824, 0x33333333, + 0x021b4828, 0x33333333, + 0x021b08c0, 0x24912249, + 0x021b48c0, 0x24914289, + 0x021b08b8, 0x00000800, + 0x021b48b8, 0x00000800, + 0x021b0004, 0x00020036, + 0x021b0008, 0x24444040, + 0x021b000c, 0x555A7955, + 0x021b0010, 0xFF320F64, + 0x021b0014, 0x01ff00db, + 0x021b0018, 0x00001740, + 0x021b001c, 0x00008000, + 0x021b002c, 0x000026d2, + 0x021b0030, 0x005A1023, + 0x021b0040, 0x00000027, + 0x021b0400, 0x14420000, + 0x021b0000, 0x831A0000, + 0x021b0890, 0x00400C58, + 0x00bb0008, 0x00000000, + 0x00bb000c, 0x2891E41A, + 0x00bb0038, 0x00000564, + 0x00bb0014, 0x00000040, + 0x00bb0028, 0x00000020, + 0x00bb002c, 0x00000020, + 0x021b001c, 0x04088032, + 0x021b001c, 0x00008033, + 0x021b001c, 0x00048031, + 0x021b001c, 0x09408030, + 0x021b001c, 0x04008040, + 0x021b0020, 0x00005800, + 0x021b0818, 0x00011117, + 0x021b4818, 0x00011117, + 0x021b0004, 0x00025576, + 0x021b0404, 0x00011006, + 0x021b001c, 0x00000000, +}; + +static void ddr_init(int *table, int size) { - struct mx6_ddr_sysinfo sysinfo = { - /* width of data bus:0=16,1=32,2=64 */ - .dsize = 2, - /* config for full 4GB range so that get_mem_size() works */ - .cs_density = 32, /* 32Gb per CS */ - /* single chip select */ - .ncs = 1, - .cs1_mirror = 0, - .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */ - .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */ - .walat = 1, /* Write additional latency */ - .ralat = 5, /* Read additional latency */ - .mif3_mode = 3, /* Command prediction working mode */ - .bi_on = 1, /* Bank interleaving enabled */ - .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ - .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ - .ddr_type = DDR_TYPE_DDR3, - .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ - }; + int i; - if (is_mx6dqp()) { - mx6dq_dram_iocfg(64, &mx6dqp_ddr_ioregs, &mx6_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6dqp_mmcd_calib, &mem_ddr); - } else { - mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr); - } + for (i = 0; i < size / 2 ; i++) + writel(table[2 * i + 1], table[2 * i]); +} + +static void spl_dram_init(void) +{ + if (is_mx6dq()) + ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table)); + else if (is_mx6dqp()) + ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table)); } void board_init_f(ulong dummy) { + /* DDR initialization */ + spl_dram_init(); + /* setup AIPS and disable watchdog */ arch_cpu_init(); @@ -884,9 +930,6 @@ void board_init_f(ulong dummy) /* UART clocks enabled and gd valid - init serial console */ preloader_console_init(); - /* DDR initialization */ - spl_dram_init(); - /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); -- cgit v0.10.2 From 29138c6ff80d6e736640050f5e9643637c44abad Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Wed, 21 Sep 2016 13:16:21 +0200 Subject: board: tbs2910: Fix BOOTMAPSZ The linux kernel imx_v6_v7_defconfig sets the user/kernel memory split to 3G/1G now (was 2G/2G before). We have to adapt the BOOTMAPSZ so that the decompressor finds zImage and dtb in lowmem. Signed-off-by: Soeren Moch diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 85501bc..facd9cf 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -39,7 +39,7 @@ #define CONFIG_SYS_MEMTEST_END \ (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024) -#define CONFIG_SYS_BOOTMAPSZ 0x6C000000 +#define CONFIG_SYS_BOOTMAPSZ 0x10000000 /* Serial console */ #define CONFIG_MXC_UART -- cgit v0.10.2 From 514a0f4b680bf93dc8fe0e7d3e9097dfee1625b6 Mon Sep 17 00:00:00 2001 From: Filip Brozovic Date: Wed, 14 Sep 2016 13:50:39 +0200 Subject: imx: iomux-v3: fix pad setup on i.MX6DQP when CONFIG_MX6QDL is defined The CPU detection macro is_mx6dq returns 0 on an i.MX6DQP, so we need to check for it explicitly in order to correctly initialize the pads when CONFIG_MX6QDL is defined. Signed-off-by: Filip Brozovic diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index 66137d1..2612e09 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -83,7 +83,7 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, #if defined(CONFIG_MX6QDL) stride = 2; - if (!is_mx6dq()) + if (!is_mx6dq() && !is_mx6dqp()) p += 1; #else stride = 1; -- cgit v0.10.2 From 9eeab572113b2978d42cbb32886a1e90434bf07c Mon Sep 17 00:00:00 2001 From: Ross Parker Date: Tue, 2 Aug 2016 08:08:07 +0000 Subject: imx_watchdog: Do not assert WDOG_B on watchdog init Currently the driver asserts WDOG_B by clearing WCR_WDA bit when enabling the watchdog. Do not clear WCR_WDA. Signed-off-by: Ross Parker Cc: Stefano Babic diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c index 2938d9f..3f826d1 100644 --- a/drivers/watchdog/imx_watchdog.c +++ b/drivers/watchdog/imx_watchdog.c @@ -34,7 +34,7 @@ void hw_watchdog_init(void) #endif timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1; writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS | - SET_WCR_WT(timeout), &wdog->wcr); + WCR_WDA | SET_WCR_WT(timeout), &wdog->wcr); hw_watchdog_reset(); } #endif diff --git a/include/fsl_wdog.h b/include/fsl_wdog.h index f698d4d..683c3f3 100644 --- a/include/fsl_wdog.h +++ b/include/fsl_wdog.h @@ -15,5 +15,6 @@ struct watchdog_regs { #define WCR_WDE 0x04 #define WCR_WDT 0x08 #define WCR_SRS 0x10 +#define WCR_WDA 0x20 #define SET_WCR_WT(x) (x << 8) #define WCR_WT_MSK SET_WCR_WT(0xFF) -- cgit v0.10.2 From 43a1be42ee34ac093460abc20d5959009aacdffe Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Thu, 22 Sep 2016 20:29:34 +0200 Subject: board: tbs2910: Add CMD_PART There is no stable mmcblk device numbering over different linux versions. Enable CMD_PART to be able to query the UUID of the root filesystem partition. So we can pass root=PARTUUID=XXX instead of root=/dev/mmcblkXpY in bootargs. Leave the default environment as is for now to stay compatible with original TBS settings. Signed-off-by: Soeren Moch diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index facd9cf..d877336 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -56,9 +56,11 @@ /* *** Command definition *** */ #define CONFIG_CMD_BMODE +#define CONFIG_CMD_PART /* Filesystems / image support */ #define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS /* MMC */ #define CONFIG_SYS_FSL_USDHC_NUM 3 -- cgit v0.10.2 From 112d59a18dc99b36f32139403ac157232f11e76e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 2 Sep 2016 17:16:45 -0300 Subject: README.imx6: Fix Boundary Devices name Correct name is "Boundary Devices". Signed-off-by: Fabio Estevam diff --git a/doc/README.imx6 b/doc/README.imx6 index 1823fb2..73b8b0b 100644 --- a/doc/README.imx6 +++ b/doc/README.imx6 @@ -91,7 +91,7 @@ Word 0x00000002: 9f027772 00000004 2. Using imx_usb_loader for first install with SPL -------------------------------------------------- -imx_usb_loader is a very nice tool by BoundaryDevice that +imx_usb_loader is a very nice tool by Boundary Devices that allow to install U-Boot without a JTAG debugger, using the USB boot mode as described in the manual. It is a replacement for Freescale's MFGTOOLS. -- cgit v0.10.2 From 7b4dd8166618a4c8d7e0ccb6545653f14f56c4d4 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:37 +0800 Subject: imx: mx6ull: add iomux header file Add iomux header file for i.MX6ULL. Signed-off-by: Peng Fan Signed-off-by: Ye Li Cc: Stefano Babic Reviewed-by: Stefano Babic diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h index 4b6bb18..b9cd670 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h @@ -37,6 +37,8 @@ enum { #include "mx6sl_pins.h" #elif defined(CONFIG_MX6SX) #include "mx6sx_pins.h" +#elif defined(CONFIG_MX6ULL) +#include "mx6ull_pins.h" #elif defined(CONFIG_MX6UL) #include "mx6ul_pins.h" #else diff --git a/arch/arm/include/asm/arch-mx6/mx6ull_pins.h b/arch/arm/include/asm/arch-mx6/mx6ull_pins.h new file mode 100644 index 0000000..682430e --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6ull_pins.h @@ -0,0 +1,1065 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_IMX6ULL_PINS_H__ +#define __ASM_ARCH_IMX6ULL_PINS_H__ + +#include + +enum { + MX6_PAD_BOOT_MODE0__GPIO5_IO10 = IOMUX_PAD(0x0044, 0x0000, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_BOOT_MODE1__GPIO5_IO11 = IOMUX_PAD(0x0048, 0x0004, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + + /* + * The TAMPER Pin can be used for GPIO, which depends on + * TAMPER_PIN_DISABLE[1:0] settings. + */ + MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 = IOMUX_PAD(0x004C, 0x0008, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER1__GPIO5_IO01 = IOMUX_PAD(0x0050, 0x000C, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 = IOMUX_PAD(0x0054, 0x0010, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER3__GPIO5_IO03 = IOMUX_PAD(0x0058, 0x0014, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER4__GPIO5_IO04 = IOMUX_PAD(0x005C, 0x0018, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER5__GPIO5_IO05 = IOMUX_PAD(0x0060, 0x001C, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER6__GPIO5_IO06 = IOMUX_PAD(0x0064, 0x0020, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER7__GPIO5_IO07 = IOMUX_PAD(0x0068, 0x0024, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER8__GPIO5_IO08 = IOMUX_PAD(0x006C, 0x0028, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + MX6_PAD_SNVS_TAMPER9__GPIO5_IO09 = IOMUX_PAD(0x0070, 0x002C, IOMUX_CONFIG_LPSR | 5, 0x0000, 0, 0), + + MX6_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x02D0, 0x0044, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_MOD__GPT2_CLK = IOMUX_PAD(0x02D0, 0x0044, 1, 0x05A0, 0, 0), + MX6_PAD_JTAG_MOD__SPDIF_OUT = IOMUX_PAD(0x02D0, 0x0044, 2, 0x0000, 0, 0), + MX6_PAD_JTAG_MOD__ENET1_REF_CLK_25M = IOMUX_PAD(0x02D0, 0x0044, 3, 0x0000, 0, 0), + MX6_PAD_JTAG_MOD__CCM_PMIC_RDY = IOMUX_PAD(0x02D0, 0x0044, 4, 0x04C0, 0, 0), + MX6_PAD_JTAG_MOD__GPIO1_IO10 = IOMUX_PAD(0x02D0, 0x0044, 5, 0x0000, 0, 0), + MX6_PAD_JTAG_MOD__SDMA_EXT_EVENT00 = IOMUX_PAD(0x02D0, 0x0044, 6, 0x0610, 0, 0), + + MX6_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x02D4, 0x0048, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TMS__GPT2_CAPTURE1 = IOMUX_PAD(0x02D4, 0x0048, 1, 0x0598, 0, 0), + MX6_PAD_JTAG_TMS__SAI2_MCLK = IOMUX_PAD(0x02D4, 0x0048, 2, 0x05F0, 0, 0), + MX6_PAD_JTAG_TMS__CCM_CLKO1 = IOMUX_PAD(0x02D4, 0x0048, 3, 0x0000, 0, 0), + MX6_PAD_JTAG_TMS__CCM_WAIT = IOMUX_PAD(0x02D4, 0x0048, 4, 0x0000, 0, 0), + MX6_PAD_JTAG_TMS__GPIO1_IO11 = IOMUX_PAD(0x02D4, 0x0048, 5, 0x0000, 0, 0), + MX6_PAD_JTAG_TMS__SDMA_EXT_EVENT01 = IOMUX_PAD(0x02D4, 0x0048, 6, 0x0614, 0, 0), + MX6_PAD_JTAG_TMS__EPIT1_OUT = IOMUX_PAD(0x02D4, 0x0048, 8, 0x0000, 0, 0), + + MX6_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x02D8, 0x004C, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TDO__GPT2_CAPTURE2 = IOMUX_PAD(0x02D8, 0x004C, 1, 0x059C, 0, 0), + MX6_PAD_JTAG_TDO__SAI2_TX_SYNC = IOMUX_PAD(0x02D8, 0x004C, 2, 0x05FC, 0, 0), + MX6_PAD_JTAG_TDO__CCM_CLKO2 = IOMUX_PAD(0x02D8, 0x004C, 3, 0x0000, 0, 0), + MX6_PAD_JTAG_TDO__CCM_STOP = IOMUX_PAD(0x02D8, 0x004C, 4, 0x0000, 0, 0), + MX6_PAD_JTAG_TDO__GPIO1_IO12 = IOMUX_PAD(0x02D8, 0x004C, 5, 0x0000, 0, 0), + MX6_PAD_JTAG_TDO__MQS_RIGHT = IOMUX_PAD(0x02D8, 0x004C, 6, 0x0000, 0, 0), + MX6_PAD_JTAG_TDO__EPIT2_OUT = IOMUX_PAD(0x02D8, 0x004C, 8, 0x0000, 0, 0), + + MX6_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x02DC, 0x0050, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TDI__GPT2_COMPARE1 = IOMUX_PAD(0x02DC, 0x0050, 1, 0x0000, 0, 0), + MX6_PAD_JTAG_TDI__SAI2_TX_BCLK = IOMUX_PAD(0x02DC, 0x0050, 2, 0x05F8, 0, 0), + MX6_PAD_JTAG_TDI__PWM6_OUT = IOMUX_PAD(0x02DC, 0x0050, 4, 0x0000, 0, 0), + MX6_PAD_JTAG_TDI__GPIO1_IO13 = IOMUX_PAD(0x02DC, 0x0050, 5, 0x0000, 0, 0), + MX6_PAD_JTAG_TDI__MQS_LEFT = IOMUX_PAD(0x02DC, 0x0050, 6, 0x0000, 0, 0), + MX6_PAD_JTAG_TDI__SIM1_POWER_FAIL = IOMUX_PAD(0x02DC, 0x0050, 8, 0x0000, 0, 0), + + MX6_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x02E0, 0x0054, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TCK__GPT2_COMPARE2 = IOMUX_PAD(0x02E0, 0x0054, 1, 0x0000, 0, 0), + MX6_PAD_JTAG_TCK__SAI2_RX_DATA = IOMUX_PAD(0x02E0, 0x0054, 2, 0x05F4, 0, 0), + MX6_PAD_JTAG_TCK__PWM7_OUT = IOMUX_PAD(0x02E0, 0x0054, 4, 0x0000, 0, 0), + MX6_PAD_JTAG_TCK__GPIO1_IO14 = IOMUX_PAD(0x02E0, 0x0054, 5, 0x0000, 0, 0), + MX6_PAD_JTAG_TCK__SIM2_POWER_FAIL = IOMUX_PAD(0x02E0, 0x0054, 8, 0x0000, 0, 0), + + MX6_PAD_JTAG_TRST_B__SJC_TRSTB = IOMUX_PAD(0x02E4, 0x0058, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TRST_B__GPT2_COMPARE3 = IOMUX_PAD(0x02E4, 0x0058, 1, 0x0000, 0, 0), + MX6_PAD_JTAG_TRST_B__SAI2_TX_DATA = IOMUX_PAD(0x02E4, 0x0058, 2, 0x0000, 0, 0), + MX6_PAD_JTAG_TRST_B__PWM8_OUT = IOMUX_PAD(0x02E4, 0x0058, 4, 0x0000, 0, 0), + MX6_PAD_JTAG_TRST_B__GPIO1_IO15 = IOMUX_PAD(0x02E4, 0x0058, 5, 0x0000, 0, 0), + MX6_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS = IOMUX_PAD(0x02E4, 0x0058, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO00__I2C2_SCL = IOMUX_PAD(0x02E8, 0x005C, IOMUX_CONFIG_SION | 0, 0x05AC, 1, 0), + MX6_PAD_GPIO1_IO00__GPT1_CAPTURE1 = IOMUX_PAD(0x02E8, 0x005C, 1, 0x058C, 0, 0), + MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID = IOMUX_PAD(0x02E8, 0x005C, 2, 0x04B8, 0, 0), + MX6_PAD_GPIO1_IO00__ENET1_REF_CLK1 = IOMUX_PAD(0x02E8, 0x005C, 3, 0x0574, 0, 0), + MX6_PAD_GPIO1_IO00__MQS_RIGHT = IOMUX_PAD(0x02E8, 0x005C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__GPIO1_IO00 = IOMUX_PAD(0x02E8, 0x005C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN = IOMUX_PAD(0x02E8, 0x005C, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__SRC_SYSTEM_RESET = IOMUX_PAD(0x02E8, 0x005C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO00__WDOG3_WDOG_B = IOMUX_PAD(0x02E8, 0x005C, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO01__I2C2_SDA = IOMUX_PAD(0x02EC, 0x0060, IOMUX_CONFIG_SION | 0, 0x05B0, 1, 0), + MX6_PAD_GPIO1_IO01__GPT1_COMPARE1 = IOMUX_PAD(0x02EC, 0x0060, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__USB_OTG1_OC = IOMUX_PAD(0x02EC, 0x0060, 2, 0x0664, 0, 0), + MX6_PAD_GPIO1_IO01__ENET2_REF_CLK2 = IOMUX_PAD(0x02EC, 0x0060, 3, 0x057C, 0, 0), + MX6_PAD_GPIO1_IO01__MQS_LEFT = IOMUX_PAD(0x02EC, 0x0060, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__GPIO1_IO01 = IOMUX_PAD(0x02EC, 0x0060, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT = IOMUX_PAD(0x02EC, 0x0060, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__SRC_EARLY_RESET = IOMUX_PAD(0x02EC, 0x0060, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO01__WDOG1_WDOG_B = IOMUX_PAD(0x02EC, 0x0060, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO02__I2C1_SCL = IOMUX_PAD(0x02F0, 0x0064, IOMUX_CONFIG_SION | 0, 0x05A4, 0, 0), + MX6_PAD_GPIO1_IO02__GPT1_COMPARE2 = IOMUX_PAD(0x02F0, 0x0064, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__USB_OTG2_PWR = IOMUX_PAD(0x02F0, 0x0064, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__ENET1_REF_CLK_25M = IOMUX_PAD(0x02F0, 0x0064, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__USDHC1_WP = IOMUX_PAD(0x02F0, 0x0064, 4, 0x066C, 0, 0), + MX6_PAD_GPIO1_IO02__GPIO1_IO02 = IOMUX_PAD(0x02F0, 0x0064, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 = IOMUX_PAD(0x02F0, 0x0064, 6, 0x0610, 1, 0), + MX6_PAD_GPIO1_IO02__SRC_ANY_PU_RESET = IOMUX_PAD(0x02F0, 0x0064, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__UART1_DCE_TX = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO02__UART1_DTE_RX = IOMUX_PAD(0x02F0, 0x0064, 8, 0x0624, 0, 0), + + MX6_PAD_GPIO1_IO03__I2C1_SDA = IOMUX_PAD(0x02F4, 0x0068, IOMUX_CONFIG_SION | 0, 0x05A8, 1, 0), + MX6_PAD_GPIO1_IO03__GPT1_COMPARE3 = IOMUX_PAD(0x02F4, 0x0068, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__USB_OTG2_OC = IOMUX_PAD(0x02F4, 0x0068, 2, 0x0660, 0, 0), + MX6_PAD_GPIO1_IO03__USDHC1_CD_B = IOMUX_PAD(0x02F4, 0x0068, 4, 0x0668, 0, 0), + MX6_PAD_GPIO1_IO03__GPIO1_IO03 = IOMUX_PAD(0x02F4, 0x0068, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK = IOMUX_PAD(0x02F4, 0x0068, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__SRC_TESTER_ACK = IOMUX_PAD(0x02F4, 0x0068, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO03__UART1_DCE_RX = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0624, 1, 0), + MX6_PAD_GPIO1_IO03__UART1_DTE_TX = IOMUX_PAD(0x02F4, 0x0068, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO04__ENET1_REF_CLK1 = IOMUX_PAD(0x02F8, 0x006C, 0, 0x0574, 1, 0), + MX6_PAD_GPIO1_IO04__PWM3_OUT = IOMUX_PAD(0x02F8, 0x006C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__USB_OTG1_PWR = IOMUX_PAD(0x02F8, 0x006C, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__USDHC1_RESET_B = IOMUX_PAD(0x02F8, 0x006C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__GPIO1_IO04 = IOMUX_PAD(0x02F8, 0x006C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN = IOMUX_PAD(0x02F8, 0x006C, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__UART5_DCE_TX = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO04__UART5_DTE_RX = IOMUX_PAD(0x02F8, 0x006C, 8, 0x0644, 2, 0), + + MX6_PAD_GPIO1_IO05__ENET2_REF_CLK2 = IOMUX_PAD(0x02FC, 0x0070, 0, 0x057C, 1, 0), + MX6_PAD_GPIO1_IO05__PWM4_OUT = IOMUX_PAD(0x02FC, 0x0070, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID = IOMUX_PAD(0x02FC, 0x0070, 2, 0x04BC, 0, 0), + MX6_PAD_GPIO1_IO05__CSI_FIELD = IOMUX_PAD(0x02FC, 0x0070, 3, 0x0530, 0, 0), + MX6_PAD_GPIO1_IO05__USDHC1_VSELECT = IOMUX_PAD(0x02FC, 0x0070, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__GPIO1_IO05 = IOMUX_PAD(0x02FC, 0x0070, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT = IOMUX_PAD(0x02FC, 0x0070, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO05__UART5_DCE_RX = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0644, 3, 0), + MX6_PAD_GPIO1_IO05__UART5_DTE_TX = IOMUX_PAD(0x02FC, 0x0070, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO06__ENET1_MDIO = IOMUX_PAD(0x0300, 0x0074, 0, 0x0578, 0, 0), + MX6_PAD_GPIO1_IO06__ENET2_MDIO = IOMUX_PAD(0x0300, 0x0074, 1, 0x0580, 0, 0), + MX6_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE = IOMUX_PAD(0x0300, 0x0074, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__CSI_MCLK = IOMUX_PAD(0x0300, 0x0074, 3, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__USDHC2_WP = IOMUX_PAD(0x0300, 0x0074, 4, 0x069C, 0, 0), + MX6_PAD_GPIO1_IO06__GPIO1_IO06 = IOMUX_PAD(0x0300, 0x0074, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__CCM_WAIT = IOMUX_PAD(0x0300, 0x0074, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__CCM_REF_EN_B = IOMUX_PAD(0x0300, 0x0074, 7, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__UART1_DCE_CTS = IOMUX_PAD(0x0300, 0x0074, 8, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO06__UART1_DTE_RTS = IOMUX_PAD(0x0300, 0x0074, 8, 0x0620, 0, 0), + + MX6_PAD_GPIO1_IO07__ENET1_MDC = IOMUX_PAD(0x0304, 0x0078, 0, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__ENET2_MDC = IOMUX_PAD(0x0304, 0x0078, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__USB_OTG_HOST_MODE = IOMUX_PAD(0x0304, 0x0078, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__CSI_PIXCLK = IOMUX_PAD(0x0304, 0x0078, 3, 0x0528, 0, 0), + MX6_PAD_GPIO1_IO07__USDHC2_CD_B = IOMUX_PAD(0x0304, 0x0078, 4, 0x0674, 1, 0), + MX6_PAD_GPIO1_IO07__GPIO1_IO07 = IOMUX_PAD(0x0304, 0x0078, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__CCM_STOP = IOMUX_PAD(0x0304, 0x0078, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO07__UART1_DCE_RTS = IOMUX_PAD(0x0304, 0x0078, 8, 0x0620, 1, 0), + MX6_PAD_GPIO1_IO07__UART1_DTE_CTS = IOMUX_PAD(0x0304, 0x0078, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO08__PWM1_OUT = IOMUX_PAD(0x0308, 0x007C, 0, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__WDOG1_WDOG_B = IOMUX_PAD(0x0308, 0x007C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__SPDIF_OUT = IOMUX_PAD(0x0308, 0x007C, 2, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__CSI_VSYNC = IOMUX_PAD(0x0308, 0x007C, 3, 0x052C, 1, 0), + MX6_PAD_GPIO1_IO08__USDHC2_VSELECT = IOMUX_PAD(0x0308, 0x007C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__GPIO1_IO08 = IOMUX_PAD(0x0308, 0x007C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO08__CCM_PMIC_RDY = IOMUX_PAD(0x0308, 0x007C, 6, 0x04C0, 1, 0), + MX6_PAD_GPIO1_IO08__UART5_DCE_RTS = IOMUX_PAD(0x0308, 0x007C, 8, 0x0640, 1, 0), + MX6_PAD_GPIO1_IO08__UART5_DTE_CTS = IOMUX_PAD(0x0308, 0x007C, 8, 0x0000, 0, 0), + + MX6_PAD_GPIO1_IO09__PWM2_OUT = IOMUX_PAD(0x030C, 0x0080, 0, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__WDOG1_WDOG_ANY = IOMUX_PAD(0x030C, 0x0080, 1, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__SPDIF_IN = IOMUX_PAD(0x030C, 0x0080, 2, 0x0618, 0, 0), + MX6_PAD_GPIO1_IO09__CSI_HSYNC = IOMUX_PAD(0x030C, 0x0080, 3, 0x0524, 1, 0), + MX6_PAD_GPIO1_IO09__USDHC2_RESET_B = IOMUX_PAD(0x030C, 0x0080, 4, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__GPIO1_IO09 = IOMUX_PAD(0x030C, 0x0080, 5, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__USDHC1_RESET_B = IOMUX_PAD(0x030C, 0x0080, 6, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__UART5_DCE_CTS = IOMUX_PAD(0x030C, 0x0080, 8, 0x0000, 0, 0), + MX6_PAD_GPIO1_IO09__UART5_DTE_RTS = IOMUX_PAD(0x030C, 0x0080, 8, 0x0640, 2, 0), + + MX6_PAD_UART1_TX_DATA__UART1_DCE_TX = IOMUX_PAD(0x0310, 0x0084, 0, 0x0000, 0, 0), + + MX6_PAD_UART1_TX_DATA__UART1_DTE_RX = IOMUX_PAD(0x0310, 0x0084, 0, 0x0624, 2, 0), + MX6_PAD_UART1_TX_DATA__ENET1_RDATA02 = IOMUX_PAD(0x0310, 0x0084, 1, 0x0000, 0, 0), + MX6_PAD_UART1_TX_DATA__I2C3_SCL = IOMUX_PAD(0x0310, 0x0084, IOMUX_CONFIG_SION | 2, 0x05B4, 0, 0), + MX6_PAD_UART1_TX_DATA__CSI_DATA02 = IOMUX_PAD(0x0310, 0x0084, 3, 0x04C4, 1, 0), + MX6_PAD_UART1_TX_DATA__GPT1_COMPARE1 = IOMUX_PAD(0x0310, 0x0084, 4, 0x0000, 0, 0), + MX6_PAD_UART1_TX_DATA__GPIO1_IO16 = IOMUX_PAD(0x0310, 0x0084, 5, 0x0000, 0, 0), + MX6_PAD_UART1_TX_DATA__SPDIF_OUT = IOMUX_PAD(0x0310, 0x0084, 8, 0x0000, 0, 0), + + MX6_PAD_UART1_RX_DATA__UART1_DCE_RX = IOMUX_PAD(0x0314, 0x0088, 0, 0x0624, 3, 0), + + MX6_PAD_UART1_RX_DATA__UART1_DTE_TX = IOMUX_PAD(0x0314, 0x0088, 0, 0x0000, 0, 0), + MX6_PAD_UART1_RX_DATA__ENET1_RDATA03 = IOMUX_PAD(0x0314, 0x0088, 1, 0x0000, 0, 0), + MX6_PAD_UART1_RX_DATA__I2C3_SDA = IOMUX_PAD(0x0314, 0x0088, IOMUX_CONFIG_SION | 2, 0x05B8, 0, 0), + MX6_PAD_UART1_RX_DATA__CSI_DATA03 = IOMUX_PAD(0x0314, 0x0088, 3, 0x04C8, 1, 0), + MX6_PAD_UART1_RX_DATA__GPT1_CLK = IOMUX_PAD(0x0314, 0x0088, 4, 0x0594, 0, 0), + MX6_PAD_UART1_RX_DATA__GPIO1_IO17 = IOMUX_PAD(0x0314, 0x0088, 5, 0x0000, 0, 0), + MX6_PAD_UART1_RX_DATA__SPDIF_IN = IOMUX_PAD(0x0314, 0x0088, 8, 0x0618, 1, 0), + + MX6_PAD_UART1_CTS_B__UART1_DCE_CTS = IOMUX_PAD(0x0318, 0x008C, 0, 0x0000, 0, 0), + + MX6_PAD_UART1_CTS_B__UART1_DTE_RTS = IOMUX_PAD(0x0318, 0x008C, 0, 0x0620, 2, 0), + MX6_PAD_UART1_CTS_B__ENET1_RX_CLK = IOMUX_PAD(0x0318, 0x008C, 1, 0x0000, 0, 0), + MX6_PAD_UART1_CTS_B__USDHC1_WP = IOMUX_PAD(0x0318, 0x008C, 2, 0x066C, 1, 0), + MX6_PAD_UART1_CTS_B__CSI_DATA04 = IOMUX_PAD(0x0318, 0x008C, 3, 0x04D8, 0, 0), + MX6_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN = IOMUX_PAD(0x0318, 0x008C, 4, 0x0000, 0, 0), + MX6_PAD_UART1_CTS_B__GPIO1_IO18 = IOMUX_PAD(0x0318, 0x008C, 5, 0x0000, 0, 0), + MX6_PAD_UART1_CTS_B__USDHC2_WP = IOMUX_PAD(0x0318, 0x008C, 8, 0x069C, 1, 0), + + MX6_PAD_UART1_RTS_B__UART1_DCE_RTS = IOMUX_PAD(0x031C, 0x0090, 0, 0x0620, 3, 0), + + MX6_PAD_UART1_RTS_B__UART1_DTE_CTS = IOMUX_PAD(0x031C, 0x0090, 0, 0x0000, 0, 0), + MX6_PAD_UART1_RTS_B__ENET1_TX_ER = IOMUX_PAD(0x031C, 0x0090, 1, 0x0000, 0, 0), + MX6_PAD_UART1_RTS_B__USDHC1_CD_B = IOMUX_PAD(0x031C, 0x0090, 2, 0x0668, 1, 0), + MX6_PAD_UART1_RTS_B__CSI_DATA05 = IOMUX_PAD(0x031C, 0x0090, 3, 0x04CC, 1, 0), + MX6_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT = IOMUX_PAD(0x031C, 0x0090, 4, 0x0000, 0, 0), + MX6_PAD_UART1_RTS_B__GPIO1_IO19 = IOMUX_PAD(0x031C, 0x0090, 5, 0x0000, 0, 0), + MX6_PAD_UART1_RTS_B__USDHC2_CD_B = IOMUX_PAD(0x031C, 0x0090, 8, 0x0674, 2, 0), + + MX6_PAD_UART2_TX_DATA__UART2_DCE_TX = IOMUX_PAD(0x0320, 0x0094, 0, 0x0000, 0, 0), + + MX6_PAD_UART2_TX_DATA__UART2_DTE_RX = IOMUX_PAD(0x0320, 0x0094, 0, 0x062C, 0, 0), + MX6_PAD_UART2_TX_DATA__ENET1_TDATA02 = IOMUX_PAD(0x0320, 0x0094, 1, 0x0000, 0, 0), + MX6_PAD_UART2_TX_DATA__I2C4_SCL = IOMUX_PAD(0x0320, 0x0094, IOMUX_CONFIG_SION | 2, 0x05BC, 0, 0), + MX6_PAD_UART2_TX_DATA__CSI_DATA06 = IOMUX_PAD(0x0320, 0x0094, 3, 0x04DC, 0, 0), + MX6_PAD_UART2_TX_DATA__GPT1_CAPTURE1 = IOMUX_PAD(0x0320, 0x0094, 4, 0x058C, 1, 0), + MX6_PAD_UART2_TX_DATA__GPIO1_IO20 = IOMUX_PAD(0x0320, 0x0094, 5, 0x0000, 0, 0), + MX6_PAD_UART2_TX_DATA__ECSPI3_SS0 = IOMUX_PAD(0x0320, 0x0094, 8, 0x0560, 0, 0), + + MX6_PAD_UART2_RX_DATA__UART2_DCE_RX = IOMUX_PAD(0x0324, 0x0098, 0, 0x062C, 1, 0), + + MX6_PAD_UART2_RX_DATA__UART2_DTE_TX = IOMUX_PAD(0x0324, 0x0098, 0, 0x0000, 0, 0), + MX6_PAD_UART2_RX_DATA__ENET1_TDATA03 = IOMUX_PAD(0x0324, 0x0098, 1, 0x0000, 0, 0), + MX6_PAD_UART2_RX_DATA__I2C4_SDA = IOMUX_PAD(0x0324, 0x0098, IOMUX_CONFIG_SION | 2, 0x05C0, 0, 0), + MX6_PAD_UART2_RX_DATA__CSI_DATA07 = IOMUX_PAD(0x0324, 0x0098, 3, 0x04E0, 0, 0), + MX6_PAD_UART2_RX_DATA__GPT1_CAPTURE2 = IOMUX_PAD(0x0324, 0x0098, 4, 0x0590, 0, 0), + MX6_PAD_UART2_RX_DATA__GPIO1_IO21 = IOMUX_PAD(0x0324, 0x0098, 5, 0x0000, 0, 0), + MX6_PAD_UART2_RX_DATA__SJC_DONE = IOMUX_PAD(0x0324, 0x0098, 7, 0x0000, 0, 0), + MX6_PAD_UART2_RX_DATA__ECSPI3_SCLK = IOMUX_PAD(0x0324, 0x0098, 8, 0x0554, 0, 0), + + MX6_PAD_UART2_CTS_B__UART2_DCE_CTS = IOMUX_PAD(0x0328, 0x009C, 0, 0x0000, 0, 0), + + MX6_PAD_UART2_CTS_B__UART2_DTE_RTS = IOMUX_PAD(0x0328, 0x009C, 0, 0x0628, 0, 0), + MX6_PAD_UART2_CTS_B__ENET1_CRS = IOMUX_PAD(0x0328, 0x009C, 1, 0x0000, 0, 0), + MX6_PAD_UART2_CTS_B__FLEXCAN2_TX = IOMUX_PAD(0x0328, 0x009C, 2, 0x0000, 0, 0), + MX6_PAD_UART2_CTS_B__CSI_DATA08 = IOMUX_PAD(0x0328, 0x009C, 3, 0x04E4, 0, 0), + MX6_PAD_UART2_CTS_B__GPT1_COMPARE2 = IOMUX_PAD(0x0328, 0x009C, 4, 0x0000, 0, 0), + MX6_PAD_UART2_CTS_B__GPIO1_IO22 = IOMUX_PAD(0x0328, 0x009C, 5, 0x0000, 0, 0), + MX6_PAD_UART2_CTS_B__SJC_DE_B = IOMUX_PAD(0x0328, 0x009C, 7, 0x0000, 0, 0), + MX6_PAD_UART2_CTS_B__ECSPI3_MOSI = IOMUX_PAD(0x0328, 0x009C, 8, 0x055C, 0, 0), + + MX6_PAD_UART2_RTS_B__UART2_DCE_RTS = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0628, 1, 0), + + MX6_PAD_UART2_RTS_B__UART2_DTE_CTS = IOMUX_PAD(0x032C, 0x00A0, 0, 0x0000, 0, 0), + MX6_PAD_UART2_RTS_B__ENET1_COL = IOMUX_PAD(0x032C, 0x00A0, 1, 0x0000, 0, 0), + MX6_PAD_UART2_RTS_B__FLEXCAN2_RX = IOMUX_PAD(0x032C, 0x00A0, 2, 0x0588, 0, 0), + MX6_PAD_UART2_RTS_B__CSI_DATA09 = IOMUX_PAD(0x032C, 0x00A0, 3, 0x04E8, 0, 0), + MX6_PAD_UART2_RTS_B__GPT1_COMPARE3 = IOMUX_PAD(0x032C, 0x00A0, 4, 0x0000, 0, 0), + MX6_PAD_UART2_RTS_B__GPIO1_IO23 = IOMUX_PAD(0x032C, 0x00A0, 5, 0x0000, 0, 0), + MX6_PAD_UART2_RTS_B__SJC_FAIL = IOMUX_PAD(0x032C, 0x00A0, 7, 0x0000, 0, 0), + MX6_PAD_UART2_RTS_B__ECSPI3_MISO = IOMUX_PAD(0x032C, 0x00A0, 8, 0x0558, 0, 0), + + MX6_PAD_UART3_TX_DATA__UART3_DCE_TX = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0000, 0, 0), + + MX6_PAD_UART3_TX_DATA__UART3_DTE_RX = IOMUX_PAD(0x0330, 0x00A4, 0, 0x0634, 0, 0), + MX6_PAD_UART3_TX_DATA__ENET2_RDATA02 = IOMUX_PAD(0x0330, 0x00A4, 1, 0x0000, 0, 0), + MX6_PAD_UART3_TX_DATA__SIM1_PORT0_PD = IOMUX_PAD(0x0330, 0x00A4, 2, 0x0000, 0, 0), + MX6_PAD_UART3_TX_DATA__CSI_DATA01 = IOMUX_PAD(0x0330, 0x00A4, 3, 0x04D4, 0, 0), + MX6_PAD_UART3_TX_DATA__UART2_DCE_CTS = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0000, 0, 0), + MX6_PAD_UART3_TX_DATA__UART2_DTE_RTS = IOMUX_PAD(0x0330, 0x00A4, 4, 0x0628, 2, 0), + MX6_PAD_UART3_TX_DATA__GPIO1_IO24 = IOMUX_PAD(0x0330, 0x00A4, 5, 0x0000, 0, 0), + MX6_PAD_UART3_TX_DATA__SJC_JTAG_ACT = IOMUX_PAD(0x0330, 0x00A4, 7, 0x0000, 0, 0), + MX6_PAD_UART3_TX_DATA__ANATOP_OTG1_ID = IOMUX_PAD(0x0330, 0x00A4, 8, 0x04B8, 1, 0), + + MX6_PAD_UART3_RX_DATA__UART3_DCE_RX = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0634, 1, 0), + + MX6_PAD_UART3_RX_DATA__UART3_DTE_TX = IOMUX_PAD(0x0334, 0x00A8, 0, 0x0000, 0, 0), + MX6_PAD_UART3_RX_DATA__ENET2_RDATA03 = IOMUX_PAD(0x0334, 0x00A8, 1, 0x0000, 0, 0), + MX6_PAD_UART3_RX_DATA__SIM2_PORT0_PD = IOMUX_PAD(0x0334, 0x00A8, 2, 0x0000, 0, 0), + MX6_PAD_UART3_RX_DATA__CSI_DATA00 = IOMUX_PAD(0x0334, 0x00A8, 3, 0x04D0, 0, 0), + MX6_PAD_UART3_RX_DATA__UART2_DCE_RTS = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0628, 3, 0), + MX6_PAD_UART3_RX_DATA__UART2_DTE_CTS = IOMUX_PAD(0x0334, 0x00A8, 4, 0x0000, 0, 0), + MX6_PAD_UART3_RX_DATA__GPIO1_IO25 = IOMUX_PAD(0x0334, 0x00A8, 5, 0x0000, 0, 0), + MX6_PAD_UART3_RX_DATA__EPIT1_OUT = IOMUX_PAD(0x0334, 0x00A8, 8, 0x0000, 0, 0), + + MX6_PAD_UART3_CTS_B__UART3_DCE_CTS = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0000, 0, 0), + + MX6_PAD_UART3_CTS_B__UART3_DTE_RTS = IOMUX_PAD(0x0338, 0x00AC, 0, 0x0630, 0, 0), + MX6_PAD_UART3_CTS_B__ENET2_RX_CLK = IOMUX_PAD(0x0338, 0x00AC, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0), + MX6_PAD_UART3_CTS_B__FLEXCAN1_TX = IOMUX_PAD(0x0338, 0x00AC, 2, 0x0000, 0, 0), + MX6_PAD_UART3_CTS_B__CSI_DATA10 = IOMUX_PAD(0x0338, 0x00AC, 3, 0x04EC, 0, 0), + MX6_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN = IOMUX_PAD(0x0338, 0x00AC, 4, 0x0000, 0, 0), + MX6_PAD_UART3_CTS_B__GPIO1_IO26 = IOMUX_PAD(0x0338, 0x00AC, 5, 0x0000, 0, 0), + MX6_PAD_UART3_CTS_B__EPIT2_OUT = IOMUX_PAD(0x0338, 0x00AC, 8, 0x0000, 0, 0), + + MX6_PAD_UART3_RTS_B__UART3_DCE_RTS = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0630, 1, 0), + + MX6_PAD_UART3_RTS_B__UART3_DTE_CTS = IOMUX_PAD(0x033C, 0x00B0, 0, 0x0000, 0, 0), + MX6_PAD_UART3_RTS_B__ENET2_TX_ER = IOMUX_PAD(0x033C, 0x00B0, 1, 0x0000, 0, 0), + MX6_PAD_UART3_RTS_B__FLEXCAN1_RX = IOMUX_PAD(0x033C, 0x00B0, 2, 0x0584, 0, 0), + MX6_PAD_UART3_RTS_B__CSI_DATA11 = IOMUX_PAD(0x033C, 0x00B0, 3, 0x04F0, 0, 0), + MX6_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT = IOMUX_PAD(0x033C, 0x00B0, 4, 0x0000, 0, 0), + MX6_PAD_UART3_RTS_B__GPIO1_IO27 = IOMUX_PAD(0x033C, 0x00B0, 5, 0x0000, 0, 0), + MX6_PAD_UART3_RTS_B__WDOG1_WDOG_B = IOMUX_PAD(0x033C, 0x00B0, 8, 0x0000, 0, 0), + + MX6_PAD_UART4_TX_DATA__UART4_DCE_TX = IOMUX_PAD(0x0340, 0x00B4, 0, 0x0000, 0, 0), + + MX6_PAD_UART4_TX_DATA__UART4_DTE_RX = IOMUX_PAD(0x0340, 0x00B4, 0, 0x063C, 0, 0), + MX6_PAD_UART4_TX_DATA__ENET2_TDATA02 = IOMUX_PAD(0x0340, 0x00B4, 1, 0x0000, 0, 0), + MX6_PAD_UART4_TX_DATA__I2C1_SCL = IOMUX_PAD(0x0340, 0x00B4, IOMUX_CONFIG_SION | 2, 0x05A4, 1, 0), + MX6_PAD_UART4_TX_DATA__CSI_DATA12 = IOMUX_PAD(0x0340, 0x00B4, 3, 0x04F4, 0, 0), + MX6_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 = IOMUX_PAD(0x0340, 0x00B4, 4, 0x0000, 0, 0), + MX6_PAD_UART4_TX_DATA__GPIO1_IO28 = IOMUX_PAD(0x0340, 0x00B4, 5, 0x0000, 0, 0), + MX6_PAD_UART4_TX_DATA__ECSPI2_SCLK = IOMUX_PAD(0x0340, 0x00B4, 8, 0x0544, 1, 0), + + MX6_PAD_UART4_RX_DATA__UART4_DCE_RX = IOMUX_PAD(0x0344, 0x00B8, 0, 0x063C, 1, 0), + + MX6_PAD_UART4_RX_DATA__UART4_DTE_TX = IOMUX_PAD(0x0344, 0x00B8, 0, 0x0000, 0, 0), + MX6_PAD_UART4_RX_DATA__ENET2_TDATA03 = IOMUX_PAD(0x0344, 0x00B8, 1, 0x0000, 0, 0), + MX6_PAD_UART4_RX_DATA__I2C1_SDA = IOMUX_PAD(0x0344, 0x00B8, IOMUX_CONFIG_SION | 2, 0x05A8, 2, 0), + MX6_PAD_UART4_RX_DATA__CSI_DATA13 = IOMUX_PAD(0x0344, 0x00B8, 3, 0x04F8, 0, 0), + MX6_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 = IOMUX_PAD(0x0344, 0x00B8, 4, 0x0000, 0, 0), + MX6_PAD_UART4_RX_DATA__GPIO1_IO29 = IOMUX_PAD(0x0344, 0x00B8, 5, 0x0000, 0, 0), + MX6_PAD_UART4_RX_DATA__ECSPI2_SS0 = IOMUX_PAD(0x0344, 0x00B8, 8, 0x0550, 1, 0), + MX6_PAD_UART5_TX_DATA__GPIO1_IO30 = IOMUX_PAD(0x0348, 0x00BC, 5, 0x0000, 0, 0), + MX6_PAD_UART5_TX_DATA__ECSPI2_MOSI = IOMUX_PAD(0x0348, 0x00BC, 8, 0x054C, 0, 0), + + MX6_PAD_UART5_TX_DATA__UART5_DCE_TX = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0000, 0, 0), + + MX6_PAD_UART5_TX_DATA__UART5_DTE_RX = IOMUX_PAD(0x0348, 0x00BC, 0, 0x0644, 4, 0), + MX6_PAD_UART5_TX_DATA__ENET2_CRS = IOMUX_PAD(0x0348, 0x00BC, 1, 0x0000, 0, 0), + MX6_PAD_UART5_TX_DATA__I2C2_SCL = IOMUX_PAD(0x0348, 0x00BC, IOMUX_CONFIG_SION | 2, 0x05AC, 2, 0), + MX6_PAD_UART5_TX_DATA__CSI_DATA14 = IOMUX_PAD(0x0348, 0x00BC, 3, 0x04FC, 0, 0), + MX6_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 = IOMUX_PAD(0x0348, 0x00BC, 4, 0x0000, 0, 0), + + MX6_PAD_UART5_RX_DATA__UART5_DCE_RX = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0644, 5, 0), + + MX6_PAD_UART5_RX_DATA__UART5_DTE_TX = IOMUX_PAD(0x034C, 0x00C0, 0, 0x0000, 0, 0), + MX6_PAD_UART5_RX_DATA__ENET2_COL = IOMUX_PAD(0x034C, 0x00C0, 1, 0x0000, 0, 0), + MX6_PAD_UART5_RX_DATA__I2C2_SDA = IOMUX_PAD(0x034C, 0x00C0, IOMUX_CONFIG_SION | 2, 0x05B0, 2, 0), + MX6_PAD_UART5_RX_DATA__CSI_DATA15 = IOMUX_PAD(0x034C, 0x00C0, 3, 0x0500, 0, 0), + MX6_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB = IOMUX_PAD(0x034C, 0x00C0, 4, 0x0000, 0, 0), + MX6_PAD_UART5_RX_DATA__GPIO1_IO31 = IOMUX_PAD(0x034C, 0x00C0, 5, 0x0000, 0, 0), + MX6_PAD_UART5_RX_DATA__ECSPI2_MISO = IOMUX_PAD(0x034C, 0x00C0, 8, 0x0548, 1, 0), + + MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 = IOMUX_PAD(0x0350, 0x00C4, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA0__UART4_DCE_RTS = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0638, 0, 0), + MX6_PAD_ENET1_RX_DATA0__UART4_DTE_CTS = IOMUX_PAD(0x0350, 0x00C4, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA0__PWM1_OUT = IOMUX_PAD(0x0350, 0x00C4, 2, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA0__CSI_DATA16 = IOMUX_PAD(0x0350, 0x00C4, 3, 0x0504, 0, 0), + MX6_PAD_ENET1_RX_DATA0__FLEXCAN1_TX = IOMUX_PAD(0x0350, 0x00C4, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA0__GPIO2_IO00 = IOMUX_PAD(0x0350, 0x00C4, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA0__KPP_ROW00 = IOMUX_PAD(0x0350, 0x00C4, 6, 0x05D0, 0, 0), + MX6_PAD_ENET1_RX_DATA0__USDHC1_LCTL = IOMUX_PAD(0x0350, 0x00C4, 8, 0x0000, 0, 0), + + MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 = IOMUX_PAD(0x0354, 0x00C8, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA1__UART4_DCE_CTS = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA1__UART4_DTE_RTS = IOMUX_PAD(0x0354, 0x00C8, 1, 0x0638, 1, 0), + MX6_PAD_ENET1_RX_DATA1__PWM2_OUT = IOMUX_PAD(0x0354, 0x00C8, 2, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA1__CSI_DATA17 = IOMUX_PAD(0x0354, 0x00C8, 3, 0x0508, 0, 0), + MX6_PAD_ENET1_RX_DATA1__FLEXCAN1_RX = IOMUX_PAD(0x0354, 0x00C8, 4, 0x0584, 1, 0), + MX6_PAD_ENET1_RX_DATA1__GPIO2_IO01 = IOMUX_PAD(0x0354, 0x00C8, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_DATA1__KPP_COL00 = IOMUX_PAD(0x0354, 0x00C8, 6, 0x05C4, 0, 0), + MX6_PAD_ENET1_RX_DATA1__USDHC2_LCTL = IOMUX_PAD(0x0354, 0x00C8, 8, 0x0000, 0, 0), + + MX6_PAD_ENET1_RX_EN__ENET1_RX_EN = IOMUX_PAD(0x0358, 0x00CC, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_EN__UART5_DCE_RTS = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0640, 3, 0), + MX6_PAD_ENET1_RX_EN__UART5_DTE_CTS = IOMUX_PAD(0x0358, 0x00CC, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_EN__CSI_DATA18 = IOMUX_PAD(0x0358, 0x00CC, 3, 0x050C, 0, 0), + MX6_PAD_ENET1_RX_EN__FLEXCAN2_TX = IOMUX_PAD(0x0358, 0x00CC, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_EN__GPIO2_IO02 = IOMUX_PAD(0x0358, 0x00CC, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_EN__KPP_ROW01 = IOMUX_PAD(0x0358, 0x00CC, 6, 0x05D4, 0, 0), + MX6_PAD_ENET1_RX_EN__USDHC1_VSELECT = IOMUX_PAD(0x0358, 0x00CC, 8, 0x0000, 0, 0), + + MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 = IOMUX_PAD(0x035C, 0x00D0, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_DATA0__UART5_DCE_CTS = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_DATA0__UART5_DTE_RTS = IOMUX_PAD(0x035C, 0x00D0, 1, 0x0640, 4, 0), + MX6_PAD_ENET1_TX_DATA0__CSI_DATA19 = IOMUX_PAD(0x035C, 0x00D0, 3, 0x0510, 0, 0), + MX6_PAD_ENET1_TX_DATA0__FLEXCAN2_RX = IOMUX_PAD(0x035C, 0x00D0, 4, 0x0588, 1, 0), + MX6_PAD_ENET1_TX_DATA0__GPIO2_IO03 = IOMUX_PAD(0x035C, 0x00D0, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_DATA0__KPP_COL01 = IOMUX_PAD(0x035C, 0x00D0, 6, 0x05C8, 0, 0), + MX6_PAD_ENET1_TX_DATA0__USDHC2_VSELECT = IOMUX_PAD(0x035C, 0x00D0, 8, 0x0000, 0, 0), + + MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 = IOMUX_PAD(0x0360, 0x00D4, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_DATA1__UART6_DCE_CTS = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_DATA1__UART6_DTE_RTS = IOMUX_PAD(0x0360, 0x00D4, 1, 0x0648, 2, 0), + MX6_PAD_ENET1_TX_DATA1__PWM5_OUT = IOMUX_PAD(0x0360, 0x00D4, 2, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_DATA1__CSI_DATA20 = IOMUX_PAD(0x0360, 0x00D4, 3, 0x0514, 0, 0), + MX6_PAD_ENET1_TX_DATA1__ENET2_MDIO = IOMUX_PAD(0x0360, 0x00D4, 4, 0x0580, 1, 0), + MX6_PAD_ENET1_TX_DATA1__GPIO2_IO04 = IOMUX_PAD(0x0360, 0x00D4, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_DATA1__KPP_ROW02 = IOMUX_PAD(0x0360, 0x00D4, 6, 0x05D8, 0, 0), + MX6_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0360, 0x00D4, 8, 0x0000, 0, 0), + + MX6_PAD_ENET1_TX_EN__ENET1_TX_EN = IOMUX_PAD(0x0364, 0x00D8, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_EN__UART6_DCE_RTS = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0648, 3, 0), + MX6_PAD_ENET1_TX_EN__UART6_DTE_CTS = IOMUX_PAD(0x0364, 0x00D8, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_EN__PWM6_OUT = IOMUX_PAD(0x0364, 0x00D8, 2, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_EN__CSI_DATA21 = IOMUX_PAD(0x0364, 0x00D8, 3, 0x0518, 0, 0), + MX6_PAD_ENET1_TX_EN__ENET2_MDC = IOMUX_PAD(0x0364, 0x00D8, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_EN__GPIO2_IO05 = IOMUX_PAD(0x0364, 0x00D8, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_EN__KPP_COL02 = IOMUX_PAD(0x0364, 0x00D8, 6, 0x05CC, 0, 0), + MX6_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x0364, 0x00D8, 8, 0x0000, 0, 0), + + MX6_PAD_ENET1_TX_CLK__ENET1_TX_CLK = IOMUX_PAD(0x0368, 0x00DC, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__UART7_DCE_CTS = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__UART7_DTE_RTS = IOMUX_PAD(0x0368, 0x00DC, 1, 0x0650, 0, 0), + MX6_PAD_ENET1_TX_CLK__PWM7_OUT = IOMUX_PAD(0x0368, 0x00DC, 2, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__CSI_DATA22 = IOMUX_PAD(0x0368, 0x00DC, 3, 0x051C, 0, 0), + MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 = IOMUX_PAD(0x0368, 0x00DC, IOMUX_CONFIG_SION | 4, 0x0574, 2, 0), + MX6_PAD_ENET1_TX_CLK__GPIO2_IO06 = IOMUX_PAD(0x0368, 0x00DC, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__KPP_ROW03 = IOMUX_PAD(0x0368, 0x00DC, 6, 0x0000, 0, 0), + MX6_PAD_ENET1_TX_CLK__GPT1_CLK = IOMUX_PAD(0x0368, 0x00DC, 8, 0x0594, 1, 0), + + MX6_PAD_ENET1_RX_ER__ENET1_RX_ER = IOMUX_PAD(0x036C, 0x00E0, 0, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_ER__UART7_DCE_RTS = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0650, 1, 0), + MX6_PAD_ENET1_RX_ER__UART7_DTE_CTS = IOMUX_PAD(0x036C, 0x00E0, 1, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_ER__PWM8_OUT = IOMUX_PAD(0x036C, 0x00E0, 2, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_ER__CSI_DATA23 = IOMUX_PAD(0x036C, 0x00E0, 3, 0x0520, 0, 0), + MX6_PAD_ENET1_RX_ER__EIM_CRE = IOMUX_PAD(0x036C, 0x00E0, 4, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_ER__GPIO2_IO07 = IOMUX_PAD(0x036C, 0x00E0, 5, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_ER__KPP_COL03 = IOMUX_PAD(0x036C, 0x00E0, 6, 0x0000, 0, 0), + MX6_PAD_ENET1_RX_ER__GPT1_CAPTURE2 = IOMUX_PAD(0x036C, 0x00E0, 8, 0x0590, 1, 0), + + MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 = IOMUX_PAD(0x0370, 0x00E4, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA0__UART6_DCE_TX = IOMUX_PAD(0x0370, 0x00E4, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA0__UART6_DTE_RX = IOMUX_PAD(0x0370, 0x00E4, 1, 0x064C, 1, 0), + MX6_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD = IOMUX_PAD(0x0370, 0x00E4, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA0__I2C3_SCL = IOMUX_PAD(0x0370, 0x00E4, IOMUX_CONFIG_SION | 3, 0x05B4, 1, 0), + MX6_PAD_ENET2_RX_DATA0__ENET1_MDIO = IOMUX_PAD(0x0370, 0x00E4, 4, 0x0578, 1, 0), + MX6_PAD_ENET2_RX_DATA0__GPIO2_IO08 = IOMUX_PAD(0x0370, 0x00E4, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA0__KPP_ROW04 = IOMUX_PAD(0x0370, 0x00E4, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA0__USB_OTG1_PWR = IOMUX_PAD(0x0370, 0x00E4, 8, 0x0000, 0, 0), + + MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 = IOMUX_PAD(0x0374, 0x00E8, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA1__UART6_DCE_RX = IOMUX_PAD(0x0374, 0x00E8, 1, 0x064C, 2, 0), + MX6_PAD_ENET2_RX_DATA1__UART6_DTE_TX = IOMUX_PAD(0x0374, 0x00E8, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK = IOMUX_PAD(0x0374, 0x00E8, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA1__I2C3_SDA = IOMUX_PAD(0x0374, 0x00E8, IOMUX_CONFIG_SION | 3, 0x05B8, 1, 0), + MX6_PAD_ENET2_RX_DATA1__ENET1_MDC = IOMUX_PAD(0x0374, 0x00E8, 4, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA1__GPIO2_IO09 = IOMUX_PAD(0x0374, 0x00E8, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA1__KPP_COL04 = IOMUX_PAD(0x0374, 0x00E8, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA1__USB_OTG1_OC = IOMUX_PAD(0x0374, 0x00E8, 8, 0x0664, 1, 0), + + MX6_PAD_ENET2_RX_EN__ENET2_RX_EN = IOMUX_PAD(0x0378, 0x00EC, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_EN__UART7_DCE_TX = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_EN__UART7_DTE_RX = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0654, 0, 0), + MX6_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B = IOMUX_PAD(0x0378, 0x00EC, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_EN__I2C4_SCL = IOMUX_PAD(0x0378, 0x00EC, IOMUX_CONFIG_SION | 3, 0x05BC, 1, 0), + MX6_PAD_ENET2_RX_EN__EIM_ADDR26 = IOMUX_PAD(0x0378, 0x00EC, 4, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_EN__GPIO2_IO10 = IOMUX_PAD(0x0378, 0x00EC, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_EN__KPP_ROW05 = IOMUX_PAD(0x0378, 0x00EC, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M = IOMUX_PAD(0x0378, 0x00EC, 8, 0x0000, 0, 0), + + MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 = IOMUX_PAD(0x037C, 0x00F0, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0654, 1, 0), + MX6_PAD_ENET2_TX_DATA0__UART7_DTE_TX = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN = IOMUX_PAD(0x037C, 0x00F0, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA0__I2C4_SDA = IOMUX_PAD(0x037C, 0x00F0, IOMUX_CONFIG_SION | 3, 0x05C0, 1, 0), + MX6_PAD_ENET2_TX_DATA0__EIM_EB_B02 = IOMUX_PAD(0x037C, 0x00F0, 4, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA0__GPIO2_IO11 = IOMUX_PAD(0x037C, 0x00F0, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA0__KPP_COL05 = IOMUX_PAD(0x037C, 0x00F0, 6, 0x0000, 0, 0), + + MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 = IOMUX_PAD(0x0380, 0x00F4, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX = IOMUX_PAD(0x0380, 0x00F4, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA1__UART8_DTE_RX = IOMUX_PAD(0x0380, 0x00F4, 1, 0x065C, 0, 0), + MX6_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD = IOMUX_PAD(0x0380, 0x00F4, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA1__ECSPI4_SCLK = IOMUX_PAD(0x0380, 0x00F4, 3, 0x0564, 0, 0), + MX6_PAD_ENET2_TX_DATA1__EIM_EB_B03 = IOMUX_PAD(0x0380, 0x00F4, 4, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA1__GPIO2_IO12 = IOMUX_PAD(0x0380, 0x00F4, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA1__KPP_ROW06 = IOMUX_PAD(0x0380, 0x00F4, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA1__USB_OTG2_PWR = IOMUX_PAD(0x0380, 0x00F4, 8, 0x0000, 0, 0), + + MX6_PAD_ENET2_TX_EN__ENET2_TX_EN = IOMUX_PAD(0x0384, 0x00F8, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_EN__UART8_DCE_RX = IOMUX_PAD(0x0384, 0x00F8, 1, 0x065C, 1, 0), + MX6_PAD_ENET2_TX_EN__UART8_DTE_TX = IOMUX_PAD(0x0384, 0x00F8, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_EN__SIM2_PORT0_CLK = IOMUX_PAD(0x0384, 0x00F8, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_EN__ECSPI4_MOSI = IOMUX_PAD(0x0384, 0x00F8, 3, 0x056C, 0, 0), + MX6_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN = IOMUX_PAD(0x0384, 0x00F8, 4, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_EN__GPIO2_IO13 = IOMUX_PAD(0x0384, 0x00F8, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_EN__KPP_COL06 = IOMUX_PAD(0x0384, 0x00F8, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_EN__USB_OTG2_OC = IOMUX_PAD(0x0384, 0x00F8, 8, 0x0660, 1, 0), + + MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 0, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__UART8_DTE_RTS = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0658, 0, 0), + MX6_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B = IOMUX_PAD(0x0388, 0x00FC, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__ECSPI4_MISO = IOMUX_PAD(0x0388, 0x00FC, 3, 0x0568, 0, 0), + MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 4, 0x057C, 2, 0), + MX6_PAD_ENET2_TX_CLK__GPIO2_IO14 = IOMUX_PAD(0x0388, 0x00FC, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__KPP_ROW07 = IOMUX_PAD(0x0388, 0x00FC, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID = IOMUX_PAD(0x0388, 0x00FC, 8, 0x04BC, 1, 0), + + MX6_PAD_ENET2_RX_ER__ENET2_RX_ER = IOMUX_PAD(0x038C, 0x0100, 0, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS = IOMUX_PAD(0x038C, 0x0100, 1, 0x0658, 1, 0), + MX6_PAD_ENET2_RX_ER__UART8_DTE_CTS = IOMUX_PAD(0x038C, 0x0100, 1, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN = IOMUX_PAD(0x038C, 0x0100, 2, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_ER__ECSPI4_SS0 = IOMUX_PAD(0x038C, 0x0100, 3, 0x0570, 0, 0), + MX6_PAD_ENET2_RX_ER__EIM_ADDR25 = IOMUX_PAD(0x038C, 0x0100, 4, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_ER__GPIO2_IO15 = IOMUX_PAD(0x038C, 0x0100, 5, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_ER__KPP_COL07 = IOMUX_PAD(0x038C, 0x0100, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY = IOMUX_PAD(0x038C, 0x0100, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_CLK__LCDIF_CLK = IOMUX_PAD(0x0390, 0x0104, 0, 0x0000, 0, 0), + MX6_PAD_LCD_CLK__LCDIF_WR_RWN = IOMUX_PAD(0x0390, 0x0104, 1, 0x0000, 0, 0), + MX6_PAD_LCD_CLK__UART4_DCE_TX = IOMUX_PAD(0x0390, 0x0104, 2, 0x0000, 0, 0), + MX6_PAD_LCD_CLK__UART4_DTE_RX = IOMUX_PAD(0x0390, 0x0104, 2, 0x063C, 2, 0), + MX6_PAD_LCD_CLK__SAI3_MCLK = IOMUX_PAD(0x0390, 0x0104, 3, 0x0600, 0, 0), + MX6_PAD_LCD_CLK__EIM_CS2_B = IOMUX_PAD(0x0390, 0x0104, 4, 0x0000, 0, 0), + MX6_PAD_LCD_CLK__GPIO3_IO00 = IOMUX_PAD(0x0390, 0x0104, 5, 0x0000, 0, 0), + MX6_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0390, 0x0104, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_ENABLE__LCDIF_ENABLE = IOMUX_PAD(0x0394, 0x0108, 0, 0x0000, 0, 0), + MX6_PAD_LCD_ENABLE__LCDIF_RD_E = IOMUX_PAD(0x0394, 0x0108, 1, 0x0000, 0, 0), + MX6_PAD_LCD_ENABLE__UART4_DCE_RX = IOMUX_PAD(0x0394, 0x0108, 2, 0x063C, 3, 0), + MX6_PAD_LCD_ENABLE__UART4_DTE_TX = IOMUX_PAD(0x0394, 0x0108, 2, 0x0000, 0, 0), + MX6_PAD_LCD_ENABLE__SAI3_TX_SYNC = IOMUX_PAD(0x0394, 0x0108, 3, 0x060C, 0, 0), + MX6_PAD_LCD_ENABLE__EIM_CS3_B = IOMUX_PAD(0x0394, 0x0108, 4, 0x0000, 0, 0), + MX6_PAD_LCD_ENABLE__GPIO3_IO01 = IOMUX_PAD(0x0394, 0x0108, 5, 0x0000, 0, 0), + MX6_PAD_LCD_ENABLE__ECSPI2_RDY = IOMUX_PAD(0x0394, 0x0108, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_HSYNC__LCDIF_HSYNC = IOMUX_PAD(0x0398, 0x010C, 0, 0x05DC, 0, 0), + MX6_PAD_LCD_HSYNC__LCDIF_RS = IOMUX_PAD(0x0398, 0x010C, 1, 0x0000, 0, 0), + MX6_PAD_LCD_HSYNC__UART4_DCE_CTS = IOMUX_PAD(0x0398, 0x010C, 2, 0x0000, 0, 0), + MX6_PAD_LCD_HSYNC__UART4_DTE_RTS = IOMUX_PAD(0x0398, 0x010C, 2, 0x0638, 2, 0), + MX6_PAD_LCD_HSYNC__SAI3_TX_BCLK = IOMUX_PAD(0x0398, 0x010C, 3, 0x0608, 0, 0), + MX6_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB = IOMUX_PAD(0x0398, 0x010C, 4, 0x0000, 0, 0), + MX6_PAD_LCD_HSYNC__GPIO3_IO02 = IOMUX_PAD(0x0398, 0x010C, 5, 0x0000, 0, 0), + MX6_PAD_LCD_HSYNC__ECSPI2_SS1 = IOMUX_PAD(0x0398, 0x010C, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_VSYNC__LCDIF_VSYNC = IOMUX_PAD(0x039C, 0x0110, 0, 0x0000, 0, 0), + MX6_PAD_LCD_VSYNC__LCDIF_BUSY = IOMUX_PAD(0x039C, 0x0110, 1, 0x05DC, 1, 0), + MX6_PAD_LCD_VSYNC__UART4_DCE_RTS = IOMUX_PAD(0x039C, 0x0110, 2, 0x0638, 3, 0), + MX6_PAD_LCD_VSYNC__UART4_DTE_CTS = IOMUX_PAD(0x039C, 0x0110, 2, 0x0000, 0, 0), + MX6_PAD_LCD_VSYNC__SAI3_RX_DATA = IOMUX_PAD(0x039C, 0x0110, 3, 0x0604, 0, 0), + MX6_PAD_LCD_VSYNC__WDOG2_WDOG_B = IOMUX_PAD(0x039C, 0x0110, 4, 0x0000, 0, 0), + MX6_PAD_LCD_VSYNC__GPIO3_IO03 = IOMUX_PAD(0x039C, 0x0110, 5, 0x0000, 0, 0), + MX6_PAD_LCD_VSYNC__ECSPI2_SS2 = IOMUX_PAD(0x039C, 0x0110, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_RESET__LCDIF_RESET = IOMUX_PAD(0x03A0, 0x0114, 0, 0x0000, 0, 0), + MX6_PAD_LCD_RESET__LCDIF_CS = IOMUX_PAD(0x03A0, 0x0114, 1, 0x0000, 0, 0), + MX6_PAD_LCD_RESET__CA7_MX6ULL_EVENTI = IOMUX_PAD(0x03A0, 0x0114, 2, 0x0000, 0, 0), + MX6_PAD_LCD_RESET__SAI3_TX_DATA = IOMUX_PAD(0x03A0, 0x0114, 3, 0x0000, 0, 0), + MX6_PAD_LCD_RESET__WDOG1_WDOG_ANY = IOMUX_PAD(0x03A0, 0x0114, 4, 0x0000, 0, 0), + MX6_PAD_LCD_RESET__GPIO3_IO04 = IOMUX_PAD(0x03A0, 0x0114, 5, 0x0000, 0, 0), + MX6_PAD_LCD_RESET__ECSPI2_SS3 = IOMUX_PAD(0x03A0, 0x0114, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA00__LCDIF_DATA00 = IOMUX_PAD(0x03A4, 0x0118, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA00__PWM1_OUT = IOMUX_PAD(0x03A4, 0x0118, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN = IOMUX_PAD(0x03A4, 0x0118, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA00__I2C3_SDA = IOMUX_PAD(0x03A4, 0x0118, IOMUX_CONFIG_SION | 4, 0x05B8, 2, 0), + MX6_PAD_LCD_DATA00__GPIO3_IO05 = IOMUX_PAD(0x03A4, 0x0118, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA00__SRC_BT_CFG00 = IOMUX_PAD(0x03A4, 0x0118, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA00__SAI1_MCLK = IOMUX_PAD(0x03A4, 0x0118, 8, 0x05E0, 1, 0), + + MX6_PAD_LCD_DATA01__LCDIF_DATA01 = IOMUX_PAD(0x03A8, 0x011C, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA01__PWM2_OUT = IOMUX_PAD(0x03A8, 0x011C, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT = IOMUX_PAD(0x03A8, 0x011C, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA01__I2C3_SCL = IOMUX_PAD(0x03A8, 0x011C, IOMUX_CONFIG_SION | 4, 0x05B4, 2, 0), + MX6_PAD_LCD_DATA01__GPIO3_IO06 = IOMUX_PAD(0x03A8, 0x011C, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA01__SRC_BT_CFG01 = IOMUX_PAD(0x03A8, 0x011C, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA01__SAI1_TX_SYNC = IOMUX_PAD(0x03A8, 0x011C, 8, 0x05EC, 0, 0), + + MX6_PAD_LCD_DATA02__LCDIF_DATA02 = IOMUX_PAD(0x03AC, 0x0120, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA02__PWM3_OUT = IOMUX_PAD(0x03AC, 0x0120, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN = IOMUX_PAD(0x03AC, 0x0120, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA02__I2C4_SDA = IOMUX_PAD(0x03AC, 0x0120, IOMUX_CONFIG_SION | 4, 0x05C0, 2, 0), + MX6_PAD_LCD_DATA02__GPIO3_IO07 = IOMUX_PAD(0x03AC, 0x0120, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA02__SRC_BT_CFG02 = IOMUX_PAD(0x03AC, 0x0120, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA02__SAI1_TX_BCLK = IOMUX_PAD(0x03AC, 0x0120, 8, 0x05E8, 0, 0), + + MX6_PAD_LCD_DATA03__LCDIF_DATA03 = IOMUX_PAD(0x03B0, 0x0124, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA03__PWM4_OUT = IOMUX_PAD(0x03B0, 0x0124, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT = IOMUX_PAD(0x03B0, 0x0124, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA03__I2C4_SCL = IOMUX_PAD(0x03B0, 0x0124, IOMUX_CONFIG_SION | 4, 0x05BC, 2, 0), + MX6_PAD_LCD_DATA03__GPIO3_IO08 = IOMUX_PAD(0x03B0, 0x0124, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA03__SRC_BT_CFG03 = IOMUX_PAD(0x03B0, 0x0124, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA03__SAI1_RX_DATA = IOMUX_PAD(0x03B0, 0x0124, 8, 0x05E4, 0, 0), + + MX6_PAD_LCD_DATA04__LCDIF_DATA04 = IOMUX_PAD(0x03B4, 0x0128, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA04__UART8_DCE_CTS = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA04__UART8_DTE_RTS = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0658, 2, 0), + MX6_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN = IOMUX_PAD(0x03B4, 0x0128, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA04__SPDIF_SR_CLK = IOMUX_PAD(0x03B4, 0x0128, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA04__GPIO3_IO09 = IOMUX_PAD(0x03B4, 0x0128, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA04__SRC_BT_CFG04 = IOMUX_PAD(0x03B4, 0x0128, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA04__SAI1_TX_DATA = IOMUX_PAD(0x03B4, 0x0128, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA05__LCDIF_DATA05 = IOMUX_PAD(0x03B8, 0x012C, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA05__UART8_DCE_RTS = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0658, 3, 0), + MX6_PAD_LCD_DATA05__UART8_DTE_CTS = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT = IOMUX_PAD(0x03B8, 0x012C, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA05__SPDIF_OUT = IOMUX_PAD(0x03B8, 0x012C, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA05__GPIO3_IO10 = IOMUX_PAD(0x03B8, 0x012C, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA05__SRC_BT_CFG05 = IOMUX_PAD(0x03B8, 0x012C, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA05__ECSPI1_SS1 = IOMUX_PAD(0x03B8, 0x012C, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA06__LCDIF_DATA06 = IOMUX_PAD(0x03BC, 0x0130, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA06__UART7_DCE_CTS = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA06__UART7_DTE_RTS = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0650, 2, 0), + MX6_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN = IOMUX_PAD(0x03BC, 0x0130, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA06__SPDIF_LOCK = IOMUX_PAD(0x03BC, 0x0130, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA06__GPIO3_IO11 = IOMUX_PAD(0x03BC, 0x0130, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA06__SRC_BT_CFG06 = IOMUX_PAD(0x03BC, 0x0130, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA06__ECSPI1_SS2 = IOMUX_PAD(0x03BC, 0x0130, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA07__LCDIF_DATA07 = IOMUX_PAD(0x03C0, 0x0134, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA07__UART7_DCE_RTS = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0650, 3, 0), + MX6_PAD_LCD_DATA07__UART7_DTE_CTS = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT = IOMUX_PAD(0x03C0, 0x0134, 3, 0x0000, 0, 0), + MX6_PAD_LCD_DATA07__SPDIF_EXT_CLK = IOMUX_PAD(0x03C0, 0x0134, 4, 0x061C, 0, 0), + MX6_PAD_LCD_DATA07__GPIO3_IO12 = IOMUX_PAD(0x03C0, 0x0134, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA07__SRC_BT_CFG07 = IOMUX_PAD(0x03C0, 0x0134, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA07__ECSPI1_SS3 = IOMUX_PAD(0x03C0, 0x0134, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA08__LCDIF_DATA08 = IOMUX_PAD(0x03C4, 0x0138, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA08__SPDIF_IN = IOMUX_PAD(0x03C4, 0x0138, 1, 0x0618, 2, 0), + MX6_PAD_LCD_DATA08__CSI_DATA16 = IOMUX_PAD(0x03C4, 0x0138, 3, 0x0504, 1, 0), + MX6_PAD_LCD_DATA08__EIM_DATA00 = IOMUX_PAD(0x03C4, 0x0138, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA08__GPIO3_IO13 = IOMUX_PAD(0x03C4, 0x0138, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA08__SRC_BT_CFG08 = IOMUX_PAD(0x03C4, 0x0138, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA08__FLEXCAN1_TX = IOMUX_PAD(0x03C4, 0x0138, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA09__LCDIF_DATA09 = IOMUX_PAD(0x03C8, 0x013C, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA09__SAI3_MCLK = IOMUX_PAD(0x03C8, 0x013C, 1, 0x0600, 1, 0), + MX6_PAD_LCD_DATA09__CSI_DATA17 = IOMUX_PAD(0x03C8, 0x013C, 3, 0x0508, 1, 0), + MX6_PAD_LCD_DATA09__EIM_DATA01 = IOMUX_PAD(0x03C8, 0x013C, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA09__GPIO3_IO14 = IOMUX_PAD(0x03C8, 0x013C, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA09__SRC_BT_CFG09 = IOMUX_PAD(0x03C8, 0x013C, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA09__FLEXCAN1_RX = IOMUX_PAD(0x03C8, 0x013C, 8, 0x0584, 2, 0), + + MX6_PAD_LCD_DATA10__LCDIF_DATA10 = IOMUX_PAD(0x03CC, 0x0140, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA10__SAI3_RX_SYNC = IOMUX_PAD(0x03CC, 0x0140, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA10__CSI_DATA18 = IOMUX_PAD(0x03CC, 0x0140, 3, 0x050C, 1, 0), + MX6_PAD_LCD_DATA10__EIM_DATA02 = IOMUX_PAD(0x03CC, 0x0140, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA10__GPIO3_IO15 = IOMUX_PAD(0x03CC, 0x0140, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA10__SRC_BT_CFG10 = IOMUX_PAD(0x03CC, 0x0140, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA10__FLEXCAN2_TX = IOMUX_PAD(0x03CC, 0x0140, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA11__LCDIF_DATA11 = IOMUX_PAD(0x03D0, 0x0144, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA11__SAI3_RX_BCLK = IOMUX_PAD(0x03D0, 0x0144, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA11__CSI_DATA19 = IOMUX_PAD(0x03D0, 0x0144, 3, 0x0510, 1, 0), + MX6_PAD_LCD_DATA11__EIM_DATA03 = IOMUX_PAD(0x03D0, 0x0144, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA11__GPIO3_IO16 = IOMUX_PAD(0x03D0, 0x0144, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA11__SRC_BT_CFG11 = IOMUX_PAD(0x03D0, 0x0144, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA11__FLEXCAN2_RX = IOMUX_PAD(0x03D0, 0x0144, 8, 0x0588, 2, 0), + + MX6_PAD_LCD_DATA12__LCDIF_DATA12 = IOMUX_PAD(0x03D4, 0x0148, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA12__SAI3_TX_SYNC = IOMUX_PAD(0x03D4, 0x0148, 1, 0x060C, 1, 0), + MX6_PAD_LCD_DATA12__CSI_DATA20 = IOMUX_PAD(0x03D4, 0x0148, 3, 0x0514, 1, 0), + MX6_PAD_LCD_DATA12__EIM_DATA04 = IOMUX_PAD(0x03D4, 0x0148, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA12__GPIO3_IO17 = IOMUX_PAD(0x03D4, 0x0148, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA12__SRC_BT_CFG12 = IOMUX_PAD(0x03D4, 0x0148, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA12__ECSPI1_RDY = IOMUX_PAD(0x03D4, 0x0148, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA13__LCDIF_DATA13 = IOMUX_PAD(0x03D8, 0x014C, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA13__SAI3_TX_BCLK = IOMUX_PAD(0x03D8, 0x014C, 1, 0x0608, 1, 0), + MX6_PAD_LCD_DATA13__CSI_DATA21 = IOMUX_PAD(0x03D8, 0x014C, 3, 0x0518, 1, 0), + MX6_PAD_LCD_DATA13__EIM_DATA05 = IOMUX_PAD(0x03D8, 0x014C, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA13__GPIO3_IO18 = IOMUX_PAD(0x03D8, 0x014C, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA13__SRC_BT_CFG13 = IOMUX_PAD(0x03D8, 0x014C, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA13__USDHC2_RESET_B = IOMUX_PAD(0x03D8, 0x014C, 8, 0x0000, 0, 0), + + MX6_PAD_LCD_DATA14__LCDIF_DATA14 = IOMUX_PAD(0x03DC, 0x0150, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA14__SAI3_RX_DATA = IOMUX_PAD(0x03DC, 0x0150, 1, 0x0604, 1, 0), + MX6_PAD_LCD_DATA14__CSI_DATA22 = IOMUX_PAD(0x03DC, 0x0150, 3, 0x051C, 1, 0), + MX6_PAD_LCD_DATA14__EIM_DATA06 = IOMUX_PAD(0x03DC, 0x0150, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA14__GPIO3_IO19 = IOMUX_PAD(0x03DC, 0x0150, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA14__SRC_BT_CFG14 = IOMUX_PAD(0x03DC, 0x0150, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA14__USDHC2_DATA4 = IOMUX_PAD(0x03DC, 0x0150, 8, 0x068C, 0, 0), + + MX6_PAD_LCD_DATA15__LCDIF_DATA15 = IOMUX_PAD(0x03E0, 0x0154, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA15__SAI3_TX_DATA = IOMUX_PAD(0x03E0, 0x0154, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA15__CSI_DATA23 = IOMUX_PAD(0x03E0, 0x0154, 3, 0x0520, 1, 0), + MX6_PAD_LCD_DATA15__EIM_DATA07 = IOMUX_PAD(0x03E0, 0x0154, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA15__GPIO3_IO20 = IOMUX_PAD(0x03E0, 0x0154, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA15__SRC_BT_CFG15 = IOMUX_PAD(0x03E0, 0x0154, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA15__USDHC2_DATA5 = IOMUX_PAD(0x03E0, 0x0154, 8, 0x0690, 0, 0), + + MX6_PAD_LCD_DATA16__LCDIF_DATA16 = IOMUX_PAD(0x03E4, 0x0158, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA16__UART7_DCE_TX = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA16__UART7_DTE_RX = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0654, 2, 0), + MX6_PAD_LCD_DATA16__CSI_DATA01 = IOMUX_PAD(0x03E4, 0x0158, 3, 0x04D4, 1, 0), + MX6_PAD_LCD_DATA16__EIM_DATA08 = IOMUX_PAD(0x03E4, 0x0158, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA16__GPIO3_IO21 = IOMUX_PAD(0x03E4, 0x0158, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA16__SRC_BT_CFG24 = IOMUX_PAD(0x03E4, 0x0158, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA16__USDHC2_DATA6 = IOMUX_PAD(0x03E4, 0x0158, 8, 0x0694, 0, 0), + + MX6_PAD_LCD_DATA17__LCDIF_DATA17 = IOMUX_PAD(0x03E8, 0x015C, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA17__UART7_DCE_RX = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0654, 3, 0), + MX6_PAD_LCD_DATA17__UART7_DTE_TX = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA17__CSI_DATA00 = IOMUX_PAD(0x03E8, 0x015C, 3, 0x04D0, 1, 0), + MX6_PAD_LCD_DATA17__EIM_DATA09 = IOMUX_PAD(0x03E8, 0x015C, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA17__GPIO3_IO22 = IOMUX_PAD(0x03E8, 0x015C, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA17__SRC_BT_CFG25 = IOMUX_PAD(0x03E8, 0x015C, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA17__USDHC2_DATA7 = IOMUX_PAD(0x03E8, 0x015C, 8, 0x0698, 0, 0), + + MX6_PAD_LCD_DATA18__LCDIF_DATA18 = IOMUX_PAD(0x03EC, 0x0160, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA18__PWM5_OUT = IOMUX_PAD(0x03EC, 0x0160, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA18__CA7_MX6ULL_EVENTO = IOMUX_PAD(0x03EC, 0x0160, 2, 0x0000, 0, 0), + MX6_PAD_LCD_DATA18__CSI_DATA10 = IOMUX_PAD(0x03EC, 0x0160, 3, 0x04EC, 1, 0), + MX6_PAD_LCD_DATA18__EIM_DATA10 = IOMUX_PAD(0x03EC, 0x0160, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA18__GPIO3_IO23 = IOMUX_PAD(0x03EC, 0x0160, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA18__SRC_BT_CFG26 = IOMUX_PAD(0x03EC, 0x0160, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA18__USDHC2_CMD = IOMUX_PAD(0x03EC, 0x0160, 8, 0x0678, 1, 0), + MX6_PAD_LCD_DATA19__EIM_DATA11 = IOMUX_PAD(0x03F0, 0x0164, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA19__GPIO3_IO24 = IOMUX_PAD(0x03F0, 0x0164, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA19__SRC_BT_CFG27 = IOMUX_PAD(0x03F0, 0x0164, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA19__USDHC2_CLK = IOMUX_PAD(0x03F0, 0x0164, 8, 0x0670, 1, 0), + + MX6_PAD_LCD_DATA19__LCDIF_DATA19 = IOMUX_PAD(0x03F0, 0x0164, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA19__PWM6_OUT = IOMUX_PAD(0x03F0, 0x0164, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA19__WDOG1_WDOG_ANY = IOMUX_PAD(0x03F0, 0x0164, 2, 0x0000, 0, 0), + MX6_PAD_LCD_DATA19__CSI_DATA11 = IOMUX_PAD(0x03F0, 0x0164, 3, 0x04F0, 1, 0), + MX6_PAD_LCD_DATA20__EIM_DATA12 = IOMUX_PAD(0x03F4, 0x0168, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA20__GPIO3_IO25 = IOMUX_PAD(0x03F4, 0x0168, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA20__SRC_BT_CFG28 = IOMUX_PAD(0x03F4, 0x0168, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA20__USDHC2_DATA0 = IOMUX_PAD(0x03F4, 0x0168, 8, 0x067C, 1, 0), + + MX6_PAD_LCD_DATA20__LCDIF_DATA20 = IOMUX_PAD(0x03F4, 0x0168, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA20__UART8_DCE_TX = IOMUX_PAD(0x03F4, 0x0168, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA20__UART8_DTE_RX = IOMUX_PAD(0x03F4, 0x0168, 1, 0x065C, 2, 0), + MX6_PAD_LCD_DATA20__ECSPI1_SCLK = IOMUX_PAD(0x03F4, 0x0168, 2, 0x0534, 0, 0), + MX6_PAD_LCD_DATA20__CSI_DATA12 = IOMUX_PAD(0x03F4, 0x0168, 3, 0x04F4, 1, 0), + + MX6_PAD_LCD_DATA21__LCDIF_DATA21 = IOMUX_PAD(0x03F8, 0x016C, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA21__UART8_DCE_RX = IOMUX_PAD(0x03F8, 0x016C, 1, 0x065C, 3, 0), + MX6_PAD_LCD_DATA21__UART8_DTE_TX = IOMUX_PAD(0x03F8, 0x016C, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA21__ECSPI1_SS0 = IOMUX_PAD(0x03F8, 0x016C, 2, 0x0540, 0, 0), + MX6_PAD_LCD_DATA21__CSI_DATA13 = IOMUX_PAD(0x03F8, 0x016C, 3, 0x04F8, 1, 0), + MX6_PAD_LCD_DATA21__EIM_DATA13 = IOMUX_PAD(0x03F8, 0x016C, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA21__GPIO3_IO26 = IOMUX_PAD(0x03F8, 0x016C, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA21__SRC_BT_CFG29 = IOMUX_PAD(0x03F8, 0x016C, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA21__USDHC2_DATA1 = IOMUX_PAD(0x03F8, 0x016C, 8, 0x0680, 1, 0), + + MX6_PAD_LCD_DATA22__LCDIF_DATA22 = IOMUX_PAD(0x03FC, 0x0170, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA22__MQS_RIGHT = IOMUX_PAD(0x03FC, 0x0170, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA22__ECSPI1_MOSI = IOMUX_PAD(0x03FC, 0x0170, 2, 0x053C, 0, 0), + MX6_PAD_LCD_DATA22__CSI_DATA14 = IOMUX_PAD(0x03FC, 0x0170, 3, 0x04FC, 1, 0), + MX6_PAD_LCD_DATA22__EIM_DATA14 = IOMUX_PAD(0x03FC, 0x0170, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA22__GPIO3_IO27 = IOMUX_PAD(0x03FC, 0x0170, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA22__SRC_BT_CFG30 = IOMUX_PAD(0x03FC, 0x0170, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA22__USDHC2_DATA2 = IOMUX_PAD(0x03FC, 0x0170, 8, 0x0684, 0, 0), + + MX6_PAD_LCD_DATA23__LCDIF_DATA23 = IOMUX_PAD(0x0400, 0x0174, 0, 0x0000, 0, 0), + MX6_PAD_LCD_DATA23__MQS_LEFT = IOMUX_PAD(0x0400, 0x0174, 1, 0x0000, 0, 0), + MX6_PAD_LCD_DATA23__ECSPI1_MISO = IOMUX_PAD(0x0400, 0x0174, 2, 0x0538, 0, 0), + MX6_PAD_LCD_DATA23__CSI_DATA15 = IOMUX_PAD(0x0400, 0x0174, 3, 0x0500, 1, 0), + MX6_PAD_LCD_DATA23__EIM_DATA15 = IOMUX_PAD(0x0400, 0x0174, 4, 0x0000, 0, 0), + MX6_PAD_LCD_DATA23__GPIO3_IO28 = IOMUX_PAD(0x0400, 0x0174, 5, 0x0000, 0, 0), + MX6_PAD_LCD_DATA23__SRC_BT_CFG31 = IOMUX_PAD(0x0400, 0x0174, 6, 0x0000, 0, 0), + MX6_PAD_LCD_DATA23__USDHC2_DATA3 = IOMUX_PAD(0x0400, 0x0174, 8, 0x0688, 1, 0), + + MX6_PAD_NAND_RE_B__RAWNAND_RE_B = IOMUX_PAD(0x0404, 0x0178, 0, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__USDHC2_CLK = IOMUX_PAD(0x0404, 0x0178, 1, 0x0670, 2, 0), + MX6_PAD_NAND_RE_B__QSPI_B_SCLK = IOMUX_PAD(0x0404, 0x0178, 2, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__KPP_ROW00 = IOMUX_PAD(0x0404, 0x0178, 3, 0x05D0, 1, 0), + MX6_PAD_NAND_RE_B__EIM_EB_B00 = IOMUX_PAD(0x0404, 0x0178, 4, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__GPIO4_IO00 = IOMUX_PAD(0x0404, 0x0178, 5, 0x0000, 0, 0), + MX6_PAD_NAND_RE_B__ECSPI3_SS2 = IOMUX_PAD(0x0404, 0x0178, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_WE_B__RAWNAND_WE_B = IOMUX_PAD(0x0408, 0x017C, 0, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__USDHC2_CMD = IOMUX_PAD(0x0408, 0x017C, 1, 0x0678, 2, 0), + MX6_PAD_NAND_WE_B__QSPI_B_SS0_B = IOMUX_PAD(0x0408, 0x017C, 2, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__KPP_COL00 = IOMUX_PAD(0x0408, 0x017C, 3, 0x05C4, 1, 0), + MX6_PAD_NAND_WE_B__EIM_EB_B01 = IOMUX_PAD(0x0408, 0x017C, 4, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__GPIO4_IO01 = IOMUX_PAD(0x0408, 0x017C, 5, 0x0000, 0, 0), + MX6_PAD_NAND_WE_B__ECSPI3_SS3 = IOMUX_PAD(0x0408, 0x017C, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA00__RAWNAND_DATA00 = IOMUX_PAD(0x040C, 0x0180, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__USDHC2_DATA0 = IOMUX_PAD(0x040C, 0x0180, 1, 0x067C, 2, 0), + MX6_PAD_NAND_DATA00__QSPI_B_SS1_B = IOMUX_PAD(0x040C, 0x0180, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__KPP_ROW01 = IOMUX_PAD(0x040C, 0x0180, 3, 0x05D4, 1, 0), + MX6_PAD_NAND_DATA00__EIM_AD08 = IOMUX_PAD(0x040C, 0x0180, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__GPIO4_IO02 = IOMUX_PAD(0x040C, 0x0180, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA00__ECSPI4_RDY = IOMUX_PAD(0x040C, 0x0180, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA01__RAWNAND_DATA01 = IOMUX_PAD(0x0410, 0x0184, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__USDHC2_DATA1 = IOMUX_PAD(0x0410, 0x0184, 1, 0x0680, 2, 0), + MX6_PAD_NAND_DATA01__QSPI_B_DQS = IOMUX_PAD(0x0410, 0x0184, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__KPP_COL01 = IOMUX_PAD(0x0410, 0x0184, 3, 0x05C8, 1, 0), + MX6_PAD_NAND_DATA01__EIM_AD09 = IOMUX_PAD(0x0410, 0x0184, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__GPIO4_IO03 = IOMUX_PAD(0x0410, 0x0184, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA01__ECSPI4_SS1 = IOMUX_PAD(0x0410, 0x0184, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA02__RAWNAND_DATA02 = IOMUX_PAD(0x0414, 0x0188, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__USDHC2_DATA2 = IOMUX_PAD(0x0414, 0x0188, 1, 0x0684, 1, 0), + MX6_PAD_NAND_DATA02__QSPI_B_DATA00 = IOMUX_PAD(0x0414, 0x0188, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__KPP_ROW02 = IOMUX_PAD(0x0414, 0x0188, 3, 0x05D8, 1, 0), + MX6_PAD_NAND_DATA02__EIM_AD10 = IOMUX_PAD(0x0414, 0x0188, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__GPIO4_IO04 = IOMUX_PAD(0x0414, 0x0188, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA02__ECSPI4_SS2 = IOMUX_PAD(0x0414, 0x0188, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA03__RAWNAND_DATA03 = IOMUX_PAD(0x0418, 0x018C, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__USDHC2_DATA3 = IOMUX_PAD(0x0418, 0x018C, 1, 0x0688, 2, 0), + MX6_PAD_NAND_DATA03__QSPI_B_DATA01 = IOMUX_PAD(0x0418, 0x018C, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__KPP_COL02 = IOMUX_PAD(0x0418, 0x018C, 3, 0x05CC, 1, 0), + MX6_PAD_NAND_DATA03__EIM_AD11 = IOMUX_PAD(0x0418, 0x018C, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__GPIO4_IO05 = IOMUX_PAD(0x0418, 0x018C, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA03__ECSPI4_SS3 = IOMUX_PAD(0x0418, 0x018C, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA04__RAWNAND_DATA04 = IOMUX_PAD(0x041C, 0x0190, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__USDHC2_DATA4 = IOMUX_PAD(0x041C, 0x0190, 1, 0x068C, 1, 0), + MX6_PAD_NAND_DATA04__QSPI_B_DATA02 = IOMUX_PAD(0x041C, 0x0190, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__ECSPI4_SCLK = IOMUX_PAD(0x041C, 0x0190, 3, 0x0564, 1, 0), + MX6_PAD_NAND_DATA04__EIM_AD12 = IOMUX_PAD(0x041C, 0x0190, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__GPIO4_IO06 = IOMUX_PAD(0x041C, 0x0190, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__UART2_DCE_TX = IOMUX_PAD(0x041C, 0x0190, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA04__UART2_DTE_RX = IOMUX_PAD(0x041C, 0x0190, 8, 0x062C, 2, 0), + + MX6_PAD_NAND_DATA05__RAWNAND_DATA05 = IOMUX_PAD(0x0420, 0x0194, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__USDHC2_DATA5 = IOMUX_PAD(0x0420, 0x0194, 1, 0x0690, 1, 0), + MX6_PAD_NAND_DATA05__QSPI_B_DATA03 = IOMUX_PAD(0x0420, 0x0194, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__ECSPI4_MOSI = IOMUX_PAD(0x0420, 0x0194, 3, 0x056C, 1, 0), + MX6_PAD_NAND_DATA05__EIM_AD13 = IOMUX_PAD(0x0420, 0x0194, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__GPIO4_IO07 = IOMUX_PAD(0x0420, 0x0194, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA05__UART2_DCE_RX = IOMUX_PAD(0x0420, 0x0194, 8, 0x062C, 3, 0), + MX6_PAD_NAND_DATA05__UART2_DTE_TX = IOMUX_PAD(0x0420, 0x0194, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_DATA06__RAWNAND_DATA06 = IOMUX_PAD(0x0424, 0x0198, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__USDHC2_DATA6 = IOMUX_PAD(0x0424, 0x0198, 1, 0x0694, 1, 0), + MX6_PAD_NAND_DATA06__SAI2_RX_BCLK = IOMUX_PAD(0x0424, 0x0198, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__ECSPI4_MISO = IOMUX_PAD(0x0424, 0x0198, 3, 0x0568, 1, 0), + MX6_PAD_NAND_DATA06__EIM_AD14 = IOMUX_PAD(0x0424, 0x0198, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__GPIO4_IO08 = IOMUX_PAD(0x0424, 0x0198, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__UART2_DCE_CTS = IOMUX_PAD(0x0424, 0x0198, 8, 0x0000, 0, 0), + MX6_PAD_NAND_DATA06__UART2_DTE_RTS = IOMUX_PAD(0x0424, 0x0198, 8, 0x0628, 4, 0), + + MX6_PAD_NAND_DATA07__RAWNAND_DATA07 = IOMUX_PAD(0x0428, 0x019C, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__USDHC2_DATA7 = IOMUX_PAD(0x0428, 0x019C, 1, 0x0698, 1, 0), + MX6_PAD_NAND_DATA07__QSPI_A_SS1_B = IOMUX_PAD(0x0428, 0x019C, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__ECSPI4_SS0 = IOMUX_PAD(0x0428, 0x019C, 3, 0x0570, 1, 0), + MX6_PAD_NAND_DATA07__EIM_AD15 = IOMUX_PAD(0x0428, 0x019C, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__GPIO4_IO09 = IOMUX_PAD(0x0428, 0x019C, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DATA07__UART2_DCE_RTS = IOMUX_PAD(0x0428, 0x019C, 8, 0x0628, 5, 0), + MX6_PAD_NAND_DATA07__UART2_DTE_CTS = IOMUX_PAD(0x0428, 0x019C, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_ALE__RAWNAND_ALE = IOMUX_PAD(0x042C, 0x01A0, 0, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__USDHC2_RESET_B = IOMUX_PAD(0x042C, 0x01A0, 1, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__QSPI_A_DQS = IOMUX_PAD(0x042C, 0x01A0, 2, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__PWM3_OUT = IOMUX_PAD(0x042C, 0x01A0, 3, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__EIM_ADDR17 = IOMUX_PAD(0x042C, 0x01A0, 4, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__GPIO4_IO10 = IOMUX_PAD(0x042C, 0x01A0, 5, 0x0000, 0, 0), + MX6_PAD_NAND_ALE__ECSPI3_SS1 = IOMUX_PAD(0x042C, 0x01A0, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_WP_B__RAWNAND_WP_B = IOMUX_PAD(0x0430, 0x01A4, 0, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__USDHC1_RESET_B = IOMUX_PAD(0x0430, 0x01A4, 1, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__QSPI_A_SCLK = IOMUX_PAD(0x0430, 0x01A4, 2, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__PWM4_OUT = IOMUX_PAD(0x0430, 0x01A4, 3, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__EIM_BCLK = IOMUX_PAD(0x0430, 0x01A4, 4, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__GPIO4_IO11 = IOMUX_PAD(0x0430, 0x01A4, 5, 0x0000, 0, 0), + MX6_PAD_NAND_WP_B__ECSPI3_RDY = IOMUX_PAD(0x0430, 0x01A4, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_READY_B__RAWNAND_READY_B = IOMUX_PAD(0x0434, 0x01A8, 0, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__USDHC1_DATA4 = IOMUX_PAD(0x0434, 0x01A8, 1, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__QSPI_A_DATA00 = IOMUX_PAD(0x0434, 0x01A8, 2, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__ECSPI3_SS0 = IOMUX_PAD(0x0434, 0x01A8, 3, 0x0560, 1, 0), + MX6_PAD_NAND_READY_B__EIM_CS1_B = IOMUX_PAD(0x0434, 0x01A8, 4, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__GPIO4_IO12 = IOMUX_PAD(0x0434, 0x01A8, 5, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__UART3_DCE_TX = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0000, 0, 0), + MX6_PAD_NAND_READY_B__UART3_DTE_RX = IOMUX_PAD(0x0434, 0x01A8, 8, 0x0634, 2, 0), + + MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B = IOMUX_PAD(0x0438, 0x01AC, 0, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__USDHC1_DATA5 = IOMUX_PAD(0x0438, 0x01AC, 1, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__QSPI_A_DATA01 = IOMUX_PAD(0x0438, 0x01AC, 2, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__ECSPI3_SCLK = IOMUX_PAD(0x0438, 0x01AC, 3, 0x0554, 1, 0), + MX6_PAD_NAND_CE0_B__EIM_DTACK_B = IOMUX_PAD(0x0438, 0x01AC, 4, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__GPIO4_IO13 = IOMUX_PAD(0x0438, 0x01AC, 5, 0x0000, 0, 0), + MX6_PAD_NAND_CE0_B__UART3_DCE_RX = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0634, 3, 0), + MX6_PAD_NAND_CE0_B__UART3_DTE_TX = IOMUX_PAD(0x0438, 0x01AC, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_CE1_B__RAWNAND_CE1_B = IOMUX_PAD(0x043C, 0x01B0, 0, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__USDHC1_DATA6 = IOMUX_PAD(0x043C, 0x01B0, 1, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__QSPI_A_DATA02 = IOMUX_PAD(0x043C, 0x01B0, 2, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__ECSPI3_MOSI = IOMUX_PAD(0x043C, 0x01B0, 3, 0x055C, 1, 0), + MX6_PAD_NAND_CE1_B__EIM_ADDR18 = IOMUX_PAD(0x043C, 0x01B0, 4, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__GPIO4_IO14 = IOMUX_PAD(0x043C, 0x01B0, 5, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__UART3_DCE_CTS = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0000, 0, 0), + MX6_PAD_NAND_CE1_B__UART3_DTE_RTS = IOMUX_PAD(0x043C, 0x01B0, 8, 0x0630, 2, 0), + + MX6_PAD_NAND_CLE__RAWNAND_CLE = IOMUX_PAD(0x0440, 0x01B4, 0, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__USDHC1_DATA7 = IOMUX_PAD(0x0440, 0x01B4, 1, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__QSPI_A_DATA03 = IOMUX_PAD(0x0440, 0x01B4, 2, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__ECSPI3_MISO = IOMUX_PAD(0x0440, 0x01B4, 3, 0x0558, 1, 0), + MX6_PAD_NAND_CLE__EIM_ADDR16 = IOMUX_PAD(0x0440, 0x01B4, 4, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__GPIO4_IO15 = IOMUX_PAD(0x0440, 0x01B4, 5, 0x0000, 0, 0), + MX6_PAD_NAND_CLE__UART3_DCE_RTS = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0630, 3, 0), + MX6_PAD_NAND_CLE__UART3_DTE_CTS = IOMUX_PAD(0x0440, 0x01B4, 8, 0x0000, 0, 0), + + MX6_PAD_NAND_DQS__RAWNAND_DQS = IOMUX_PAD(0x0444, 0x01B8, 0, 0x0000, 0, 0), + MX6_PAD_NAND_DQS__CSI_FIELD = IOMUX_PAD(0x0444, 0x01B8, 1, 0x0530, 1, 0), + MX6_PAD_NAND_DQS__QSPI_A_SS0_B = IOMUX_PAD(0x0444, 0x01B8, 2, 0x0000, 0, 0), + MX6_PAD_NAND_DQS__PWM5_OUT = IOMUX_PAD(0x0444, 0x01B8, 3, 0x0000, 0, 0), + MX6_PAD_NAND_DQS__EIM_WAIT = IOMUX_PAD(0x0444, 0x01B8, 4, 0x0000, 0, 0), + MX6_PAD_NAND_DQS__GPIO4_IO16 = IOMUX_PAD(0x0444, 0x01B8, 5, 0x0000, 0, 0), + MX6_PAD_NAND_DQS__SDMA_EXT_EVENT01 = IOMUX_PAD(0x0444, 0x01B8, 6, 0x0614, 1, 0), + MX6_PAD_NAND_DQS__SPDIF_EXT_CLK = IOMUX_PAD(0x0444, 0x01B8, 8, 0x061C, 1, 0), + + MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0448, 0x01BC, 0, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPT2_COMPARE1 = IOMUX_PAD(0x0448, 0x01BC, 1, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__SAI2_RX_SYNC = IOMUX_PAD(0x0448, 0x01BC, 2, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__SPDIF_OUT = IOMUX_PAD(0x0448, 0x01BC, 3, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__EIM_ADDR19 = IOMUX_PAD(0x0448, 0x01BC, 4, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPIO2_IO16 = IOMUX_PAD(0x0448, 0x01BC, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__SDMA_EXT_EVENT00 = IOMUX_PAD(0x0448, 0x01BC, 6, 0x0610, 2, 0), + MX6_PAD_SD1_CMD__USB_OTG1_PWR = IOMUX_PAD(0x0448, 0x01BC, 8, 0x0000, 0, 0), + + MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x044C, 0x01C0, 0, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPT2_COMPARE2 = IOMUX_PAD(0x044C, 0x01C0, 1, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__SAI2_MCLK = IOMUX_PAD(0x044C, 0x01C0, 2, 0x05F0, 1, 0), + MX6_PAD_SD1_CLK__SPDIF_IN = IOMUX_PAD(0x044C, 0x01C0, 3, 0x0618, 3, 0), + MX6_PAD_SD1_CLK__EIM_ADDR20 = IOMUX_PAD(0x044C, 0x01C0, 4, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPIO2_IO17 = IOMUX_PAD(0x044C, 0x01C0, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__USB_OTG1_OC = IOMUX_PAD(0x044C, 0x01C0, 8, 0x0664, 2, 0), + + MX6_PAD_SD1_DATA0__USDHC1_DATA0 = IOMUX_PAD(0x0450, 0x01C4, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__GPT2_COMPARE3 = IOMUX_PAD(0x0450, 0x01C4, 1, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__SAI2_TX_SYNC = IOMUX_PAD(0x0450, 0x01C4, 2, 0x05FC, 1, 0), + MX6_PAD_SD1_DATA0__FLEXCAN1_TX = IOMUX_PAD(0x0450, 0x01C4, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__EIM_ADDR21 = IOMUX_PAD(0x0450, 0x01C4, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__GPIO2_IO18 = IOMUX_PAD(0x0450, 0x01C4, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA0__ANATOP_OTG1_ID = IOMUX_PAD(0x0450, 0x01C4, 8, 0x04B8, 2, 0), + + MX6_PAD_SD1_DATA1__USDHC1_DATA1 = IOMUX_PAD(0x0454, 0x01C8, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__GPT2_CLK = IOMUX_PAD(0x0454, 0x01C8, 1, 0x05A0, 1, 0), + MX6_PAD_SD1_DATA1__SAI2_TX_BCLK = IOMUX_PAD(0x0454, 0x01C8, 2, 0x05F8, 1, 0), + MX6_PAD_SD1_DATA1__FLEXCAN1_RX = IOMUX_PAD(0x0454, 0x01C8, 3, 0x0584, 3, 0), + MX6_PAD_SD1_DATA1__EIM_ADDR22 = IOMUX_PAD(0x0454, 0x01C8, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__GPIO2_IO19 = IOMUX_PAD(0x0454, 0x01C8, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA1__USB_OTG2_PWR = IOMUX_PAD(0x0454, 0x01C8, 8, 0x0000, 0, 0), + + MX6_PAD_SD1_DATA2__USDHC1_DATA2 = IOMUX_PAD(0x0458, 0x01CC, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__GPT2_CAPTURE1 = IOMUX_PAD(0x0458, 0x01CC, 1, 0x0598, 1, 0), + MX6_PAD_SD1_DATA2__SAI2_RX_DATA = IOMUX_PAD(0x0458, 0x01CC, 2, 0x05F4, 1, 0), + MX6_PAD_SD1_DATA2__FLEXCAN2_TX = IOMUX_PAD(0x0458, 0x01CC, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__EIM_ADDR23 = IOMUX_PAD(0x0458, 0x01CC, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__GPIO2_IO20 = IOMUX_PAD(0x0458, 0x01CC, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__CCM_CLKO1 = IOMUX_PAD(0x0458, 0x01CC, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DATA2__USB_OTG2_OC = IOMUX_PAD(0x0458, 0x01CC, 8, 0x0660, 2, 0), + + MX6_PAD_SD1_DATA3__USDHC1_DATA3 = IOMUX_PAD(0x045C, 0x01D0, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__GPT2_CAPTURE2 = IOMUX_PAD(0x045C, 0x01D0, 1, 0x059C, 1, 0), + MX6_PAD_SD1_DATA3__SAI2_TX_DATA = IOMUX_PAD(0x045C, 0x01D0, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__FLEXCAN2_RX = IOMUX_PAD(0x045C, 0x01D0, 3, 0x0588, 3, 0), + MX6_PAD_SD1_DATA3__EIM_ADDR24 = IOMUX_PAD(0x045C, 0x01D0, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__GPIO2_IO21 = IOMUX_PAD(0x045C, 0x01D0, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__CCM_CLKO2 = IOMUX_PAD(0x045C, 0x01D0, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DATA3__ANATOP_OTG2_ID = IOMUX_PAD(0x045C, 0x01D0, 8, 0x04BC, 2, 0), + + MX6_PAD_CSI_MCLK__CSI_MCLK = IOMUX_PAD(0x0460, 0x01D4, 0, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__USDHC2_CD_B = IOMUX_PAD(0x0460, 0x01D4, 1, 0x0674, 0, 0), + MX6_PAD_CSI_MCLK__RAWNAND_CE2_B = IOMUX_PAD(0x0460, 0x01D4, 2, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__I2C1_SDA = IOMUX_PAD(0x0460, 0x01D4, IOMUX_CONFIG_SION | 3, 0x05A8, 0, 0), + MX6_PAD_CSI_MCLK__EIM_CS0_B = IOMUX_PAD(0x0460, 0x01D4, 4, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__GPIO4_IO17 = IOMUX_PAD(0x0460, 0x01D4, 5, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL = IOMUX_PAD(0x0460, 0x01D4, 6, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__UART6_DCE_TX = IOMUX_PAD(0x0460, 0x01D4, 8, 0x0000, 0, 0), + MX6_PAD_CSI_MCLK__UART6_DTE_RX = IOMUX_PAD(0x0460, 0x01D4, 8, 0x064C, 0, 0), + + MX6_PAD_CSI_PIXCLK__CSI_PIXCLK = IOMUX_PAD(0x0464, 0x01D8, 0, 0x0528, 1, 0), + MX6_PAD_CSI_PIXCLK__USDHC2_WP = IOMUX_PAD(0x0464, 0x01D8, 1, 0x069C, 2, 0), + MX6_PAD_CSI_PIXCLK__RAWNAND_CE3_B = IOMUX_PAD(0x0464, 0x01D8, 2, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__I2C1_SCL = IOMUX_PAD(0x0464, 0x01D8, IOMUX_CONFIG_SION | 3, 0x05A4, 2, 0), + MX6_PAD_CSI_PIXCLK__EIM_OE = IOMUX_PAD(0x0464, 0x01D8, 4, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__GPIO4_IO18 = IOMUX_PAD(0x0464, 0x01D8, 5, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 = IOMUX_PAD(0x0464, 0x01D8, 6, 0x0000, 0, 0), + MX6_PAD_CSI_PIXCLK__UART6_DCE_RX = IOMUX_PAD(0x0464, 0x01D8, 8, 0x064C, 3, 0), + MX6_PAD_CSI_PIXCLK__UART6_DTE_TX = IOMUX_PAD(0x0464, 0x01D8, 8, 0x0000, 0, 0), + + MX6_PAD_CSI_VSYNC__CSI_VSYNC = IOMUX_PAD(0x0468, 0x01DC, 0, 0x052C, 0, 0), + MX6_PAD_CSI_VSYNC__USDHC2_CLK = IOMUX_PAD(0x0468, 0x01DC, 1, 0x0670, 0, 0), + MX6_PAD_CSI_VSYNC__SIM1_PORT1_CLK = IOMUX_PAD(0x0468, 0x01DC, 2, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__I2C2_SDA = IOMUX_PAD(0x0468, 0x01DC, IOMUX_CONFIG_SION | 3, 0x05B0, 0, 0), + MX6_PAD_CSI_VSYNC__EIM_RW = IOMUX_PAD(0x0468, 0x01DC, 4, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__GPIO4_IO19 = IOMUX_PAD(0x0468, 0x01DC, 5, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__PWM7_OUT = IOMUX_PAD(0x0468, 0x01DC, 6, 0x0000, 0, 0), + MX6_PAD_CSI_VSYNC__UART6_DCE_RTS = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0648, 0, 0), + MX6_PAD_CSI_VSYNC__UART6_DTE_CTS = IOMUX_PAD(0x0468, 0x01DC, 8, 0x0000, 0, 0), + + MX6_PAD_CSI_HSYNC__CSI_HSYNC = IOMUX_PAD(0x046C, 0x01E0, 0, 0x0524, 0, 0), + MX6_PAD_CSI_HSYNC__USDHC2_CMD = IOMUX_PAD(0x046C, 0x01E0, 1, 0x0678, 0, 0), + MX6_PAD_CSI_HSYNC__SIM1_PORT1_PD = IOMUX_PAD(0x046C, 0x01E0, 2, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__I2C2_SCL = IOMUX_PAD(0x046C, 0x01E0, IOMUX_CONFIG_SION | 3, 0x05AC, 0, 0), + MX6_PAD_CSI_HSYNC__EIM_LBA_B = IOMUX_PAD(0x046C, 0x01E0, 4, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__GPIO4_IO20 = IOMUX_PAD(0x046C, 0x01E0, 5, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__PWM8_OUT = IOMUX_PAD(0x046C, 0x01E0, 6, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__UART6_DCE_CTS = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0000, 0, 0), + MX6_PAD_CSI_HSYNC__UART6_DTE_RTS = IOMUX_PAD(0x046C, 0x01E0, 8, 0x0648, 1, 0), + + MX6_PAD_CSI_DATA00__CSI_DATA02 = IOMUX_PAD(0x0470, 0x01E4, 0, 0x04C4, 0, 0), + MX6_PAD_CSI_DATA00__USDHC2_DATA0 = IOMUX_PAD(0x0470, 0x01E4, 1, 0x067C, 0, 0), + MX6_PAD_CSI_DATA00__SIM1_PORT1_RST_B = IOMUX_PAD(0x0470, 0x01E4, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__ECSPI2_SCLK = IOMUX_PAD(0x0470, 0x01E4, 3, 0x0544, 0, 0), + MX6_PAD_CSI_DATA00__EIM_AD00 = IOMUX_PAD(0x0470, 0x01E4, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__GPIO4_IO21 = IOMUX_PAD(0x0470, 0x01E4, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__SRC_INT_BOOT = IOMUX_PAD(0x0470, 0x01E4, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__UART5_DCE_TX = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA00__UART5_DTE_RX = IOMUX_PAD(0x0470, 0x01E4, 8, 0x0644, 0, 0), + + MX6_PAD_CSI_DATA01__CSI_DATA03 = IOMUX_PAD(0x0474, 0x01E8, 0, 0x04C8, 0, 0), + MX6_PAD_CSI_DATA01__USDHC2_DATA1 = IOMUX_PAD(0x0474, 0x01E8, 1, 0x0680, 0, 0), + MX6_PAD_CSI_DATA01__SIM1_PORT1_SVEN = IOMUX_PAD(0x0474, 0x01E8, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA01__ECSPI2_SS0 = IOMUX_PAD(0x0474, 0x01E8, 3, 0x0550, 0, 0), + MX6_PAD_CSI_DATA01__EIM_AD01 = IOMUX_PAD(0x0474, 0x01E8, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA01__GPIO4_IO22 = IOMUX_PAD(0x0474, 0x01E8, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA01__SAI1_MCLK = IOMUX_PAD(0x0474, 0x01E8, 6, 0x05E0, 0, 0), + MX6_PAD_CSI_DATA01__UART5_DCE_RX = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0644, 1, 0), + MX6_PAD_CSI_DATA01__UART5_DTE_TX = IOMUX_PAD(0x0474, 0x01E8, 8, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA02__CSI_DATA04 = IOMUX_PAD(0x0478, 0x01EC, 0, 0x04D8, 1, 0), + MX6_PAD_CSI_DATA02__USDHC2_DATA2 = IOMUX_PAD(0x0478, 0x01EC, 1, 0x0684, 2, 0), + MX6_PAD_CSI_DATA02__SIM1_PORT1_TRXD = IOMUX_PAD(0x0478, 0x01EC, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__ECSPI2_MOSI = IOMUX_PAD(0x0478, 0x01EC, 3, 0x054C, 1, 0), + MX6_PAD_CSI_DATA02__EIM_AD02 = IOMUX_PAD(0x0478, 0x01EC, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__GPIO4_IO23 = IOMUX_PAD(0x0478, 0x01EC, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__SAI1_RX_SYNC = IOMUX_PAD(0x0478, 0x01EC, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA02__UART5_DCE_RTS = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0640, 5, 0), + MX6_PAD_CSI_DATA02__UART5_DTE_CTS = IOMUX_PAD(0x0478, 0x01EC, 8, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA03__CSI_DATA05 = IOMUX_PAD(0x047C, 0x01F0, 0, 0x04CC, 0, 0), + MX6_PAD_CSI_DATA03__USDHC2_DATA3 = IOMUX_PAD(0x047C, 0x01F0, 1, 0x0688, 0, 0), + MX6_PAD_CSI_DATA03__SIM2_PORT1_PD = IOMUX_PAD(0x047C, 0x01F0, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__ECSPI2_MISO = IOMUX_PAD(0x047C, 0x01F0, 3, 0x0548, 0, 0), + MX6_PAD_CSI_DATA03__EIM_AD03 = IOMUX_PAD(0x047C, 0x01F0, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__GPIO4_IO24 = IOMUX_PAD(0x047C, 0x01F0, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__SAI1_RX_BCLK = IOMUX_PAD(0x047C, 0x01F0, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__UART5_DCE_CTS = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0000, 0, 0), + MX6_PAD_CSI_DATA03__UART5_DTE_RTS = IOMUX_PAD(0x047C, 0x01F0, 8, 0x0640, 0, 0), + + MX6_PAD_CSI_DATA04__CSI_DATA06 = IOMUX_PAD(0x0480, 0x01F4, 0, 0x04DC, 1, 0), + MX6_PAD_CSI_DATA04__USDHC2_DATA4 = IOMUX_PAD(0x0480, 0x01F4, 1, 0x068C, 2, 0), + MX6_PAD_CSI_DATA04__SIM2_PORT1_CLK = IOMUX_PAD(0x0480, 0x01F4, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__ECSPI1_SCLK = IOMUX_PAD(0x0480, 0x01F4, 3, 0x0534, 1, 0), + MX6_PAD_CSI_DATA04__EIM_AD04 = IOMUX_PAD(0x0480, 0x01F4, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__GPIO4_IO25 = IOMUX_PAD(0x0480, 0x01F4, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA04__SAI1_TX_SYNC = IOMUX_PAD(0x0480, 0x01F4, 6, 0x05EC, 1, 0), + MX6_PAD_CSI_DATA04__USDHC1_WP = IOMUX_PAD(0x0480, 0x01F4, 8, 0x066C, 2, 0), + + MX6_PAD_CSI_DATA05__CSI_DATA07 = IOMUX_PAD(0x0484, 0x01F8, 0, 0x04E0, 1, 0), + MX6_PAD_CSI_DATA05__USDHC2_DATA5 = IOMUX_PAD(0x0484, 0x01F8, 1, 0x0690, 2, 0), + MX6_PAD_CSI_DATA05__SIM2_PORT1_RST_B = IOMUX_PAD(0x0484, 0x01F8, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA05__ECSPI1_SS0 = IOMUX_PAD(0x0484, 0x01F8, 3, 0x0540, 1, 0), + MX6_PAD_CSI_DATA05__EIM_AD05 = IOMUX_PAD(0x0484, 0x01F8, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA05__GPIO4_IO26 = IOMUX_PAD(0x0484, 0x01F8, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA05__SAI1_TX_BCLK = IOMUX_PAD(0x0484, 0x01F8, 6, 0x05E8, 1, 0), + MX6_PAD_CSI_DATA05__USDHC1_CD_B = IOMUX_PAD(0x0484, 0x01F8, 8, 0x0668, 2, 0), + + MX6_PAD_CSI_DATA06__CSI_DATA08 = IOMUX_PAD(0x0488, 0x01FC, 0, 0x04E4, 1, 0), + MX6_PAD_CSI_DATA06__USDHC2_DATA6 = IOMUX_PAD(0x0488, 0x01FC, 1, 0x0694, 2, 0), + MX6_PAD_CSI_DATA06__SIM2_PORT1_SVEN = IOMUX_PAD(0x0488, 0x01FC, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA06__ECSPI1_MOSI = IOMUX_PAD(0x0488, 0x01FC, 3, 0x053C, 1, 0), + MX6_PAD_CSI_DATA06__EIM_AD06 = IOMUX_PAD(0x0488, 0x01FC, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA06__GPIO4_IO27 = IOMUX_PAD(0x0488, 0x01FC, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA06__SAI1_RX_DATA = IOMUX_PAD(0x0488, 0x01FC, 6, 0x05E4, 1, 0), + MX6_PAD_CSI_DATA06__USDHC1_RESET_B = IOMUX_PAD(0x0488, 0x01FC, 8, 0x0000, 0, 0), + + MX6_PAD_CSI_DATA07__CSI_DATA09 = IOMUX_PAD(0x048C, 0x0200, 0, 0x04E8, 1, 0), + MX6_PAD_CSI_DATA07__USDHC2_DATA7 = IOMUX_PAD(0x048C, 0x0200, 1, 0x0698, 2, 0), + MX6_PAD_CSI_DATA07__SIM2_PORT1_TRXD = IOMUX_PAD(0x048C, 0x0200, 2, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__ECSPI1_MISO = IOMUX_PAD(0x048C, 0x0200, 3, 0x0538, 1, 0), + MX6_PAD_CSI_DATA07__EIM_AD07 = IOMUX_PAD(0x048C, 0x0200, 4, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__GPIO4_IO28 = IOMUX_PAD(0x048C, 0x0200, 5, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__SAI1_TX_DATA = IOMUX_PAD(0x048C, 0x0200, 6, 0x0000, 0, 0), + MX6_PAD_CSI_DATA07__USDHC1_VSELECT = IOMUX_PAD(0x048C, 0x0200, 8, 0x0000, 0, 0), +}; +#endif /* __ASM_ARCH_IMX6ULL_PINS_H__ */ -- cgit v0.10.2 From 65ce54be8e0566f9ccaaccce19f6be69ce51d874 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:38 +0800 Subject: imx: mx6ull: add mx6ull major cpu type Add i.MX6ULL major cpu type. Signed-off-by: Peng Fan Signed-off-by: Ye Li Cc: Stefano Babic Reviewed-by: Stefano Babic diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index a33aa16..632faca 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -159,6 +159,8 @@ const char *get_imx_type(u32 imxtype) return "6SX"; /* SoloX version of the mx6 */ case MXC_CPU_MX6UL: return "6UL"; /* Ultra-Lite version of the mx6 */ + case MXC_CPU_MX6ULL: + return "6ULL"; /* ULL version of the mx6 */ case MXC_CPU_MX51: return "51"; case MXC_CPU_MX53: diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 7c63c13..667115b0 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -17,7 +17,8 @@ #define MXC_CPU_MX6SX 0x62 #define MXC_CPU_MX6Q 0x63 #define MXC_CPU_MX6UL 0x64 -#define MXC_CPU_MX6SOLO 0x65 /* dummy ID */ +#define MXC_CPU_MX6ULL 0x65 +#define MXC_CPU_MX6SOLO 0x66 /* dummy */ #define MXC_CPU_MX6D 0x67 #define MXC_CPU_MX6DP 0x68 #define MXC_CPU_MX6QP 0x69 -- cgit v0.10.2 From 51db46035cd72b611d2decca25d660a297965ab6 Mon Sep 17 00:00:00 2001 From: Ye Li Date: Thu, 11 Aug 2016 14:02:39 +0800 Subject: imx: mx6ull: add kconfig entry for MX6ULL i.MX6ULL is derivative from i.MX6UL, so select MX6UL for MX6ULL. If need to differenate MX6ULL from MX6UL, use CONFIG_MX6ULL Signed-off-by: Peng Fan Signed-off-by: Ye Li Cc: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 4214ab5..32405c6 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -31,6 +31,10 @@ config MX6UL select ROM_UNIFIED_SECTIONS bool +config MX6ULL + bool + select MX6UL + choice prompt "MX6 board select" optional -- cgit v0.10.2 From bbd1b07d30548b6829d7bc96a994134fde8e9cb4 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:40 +0800 Subject: imx-common: introduce is_mx6ull Introduce is_mx6ull macro. Signed-off-by: Peng Fan Cc: Stefano Babic diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h index 32f95b3..6ace8bb 100644 --- a/arch/arm/include/asm/imx-common/sys_proto.h +++ b/arch/arm/include/asm/imx-common/sys_proto.h @@ -33,6 +33,7 @@ #define is_mx6sx() (is_cpu_type(MXC_CPU_MX6SX)) #define is_mx6sl() (is_cpu_type(MXC_CPU_MX6SL)) #define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL)) +#define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL)) u32 get_nr_cpus(void); u32 get_cpu_rev(void); -- cgit v0.10.2 From f8b95731ff5a4918a95357819293fd49d77c2718 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:41 +0800 Subject: imx: ocotp: support i.MX6ULL i.MX6ULL has two 128 bits fuse banks, bank 7 and bank 8, while other banks use 256 bits. So we have to adjust the word and bank index when accessing the bank 8. When in command line `fuse read 8 0 1`, you can image `fuse read 7 4 1` in the ocotp driver implementation for 6ULL. When programming, we use word index, so need to fix bank7/8 programming for i.mx6ull. For example: fuse prog 8 3 1; The word index is (8 << 3 | 3) --> 67. But actully it should be (7 << 3 | 7) ---> 63. So fix it. Signed-off-by: Peng Fan Cc: Stefano Babic diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index 6b8566c..8a100c1 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -18,6 +18,7 @@ #include #include #include +#include #define BO_CTRL_WR_UNLOCK 16 #define BM_CTRL_WR_UNLOCK 0xffff0000 @@ -61,6 +62,8 @@ #define FUSE_BANK_SIZE 0x80 #ifdef CONFIG_MX6SL #define FUSE_BANKS 8 +#elif defined(CONFIG_MX6ULL) +#define FUSE_BANKS 9 #else #define FUSE_BANKS 16 #endif @@ -72,11 +75,11 @@ #endif #if defined(CONFIG_MX6) -#include /* * There is a hole in shadow registers address map of size 0x100 - * between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL. + * between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX, + * iMX6UL and i.MX6ULL. * Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, * we should account for this hole in address space. * @@ -97,7 +100,10 @@ u32 fuse_bank_physical(int index) if (is_mx6sl()) { phy_index = index; - } else if (is_mx6ul()) { + } else if (is_mx6ul() || is_mx6ull()) { + if (is_mx6ull() && index == 8) + index = 7; + if (index >= 6) phy_index = fuse_bank_physical(5) + (index - 6) + 3; else @@ -112,11 +118,27 @@ u32 fuse_bank_physical(int index) } return phy_index; } + +u32 fuse_word_physical(u32 bank, u32 word_index) +{ + if (is_mx6ull()) { + if (bank == 8) + word_index = word_index + 4; + } + + return word_index; +} #else u32 fuse_bank_physical(int index) { return index; } + +u32 fuse_word_physical(u32 bank, u32 word_index) +{ + return word_index; +} + #endif static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us) @@ -142,6 +164,14 @@ static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word, return -EINVAL; } + if (is_mx6ull()) { + if ((bank == 7 || bank == 8) && + word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 3) { + printf("mxc_ocotp %s(): Invalid argument on 6ULL\n", caller); + return -EINVAL; + } + } + enable_ocotp_clk(1); wait_busy(*regs, 1); @@ -176,14 +206,16 @@ int fuse_read(u32 bank, u32 word, u32 *val) struct ocotp_regs *regs; int ret; u32 phy_bank; + u32 phy_word; ret = prepare_read(®s, bank, word, val, __func__); if (ret) return ret; phy_bank = fuse_bank_physical(bank); + phy_word = fuse_word_physical(bank, word); - *val = readl(®s->bank[phy_bank].fuse_regs[word << 2]); + *val = readl(®s->bank[phy_bank].fuse_regs[phy_word << 2]); return finish_access(regs, __func__); } @@ -237,7 +269,13 @@ static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word, #ifdef CONFIG_MX7 u32 addr = bank; #else - u32 addr = bank << 3 | word; + u32 addr; + /* Bank 7 and Bank 8 only supports 4 words each for i.MX6ULL */ + if ((is_mx6ull()) && (bank > 7)) { + bank = bank - 1; + word += 4; + } + addr = bank << 3 | word; #endif set_timing(regs); @@ -325,14 +363,16 @@ int fuse_override(u32 bank, u32 word, u32 val) struct ocotp_regs *regs; int ret; u32 phy_bank; + u32 phy_word; ret = prepare_write(®s, bank, word, __func__); if (ret) return ret; phy_bank = fuse_bank_physical(bank); + phy_word = fuse_word_physical(bank, word); - writel(val, ®s->bank[phy_bank].fuse_regs[word << 2]); + writel(val, ®s->bank[phy_bank].fuse_regs[phy_word << 2]); return finish_access(regs, __func__); } -- cgit v0.10.2 From 988acd2d4c8ba81a6c6ac7ec5270b96de5170285 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:42 +0800 Subject: imx: timer: update gpt driver for i.MX6ULL The i.MX6ULL's GPT supportting taking OSC as clock source. Add i.MX6ULL support. Signed-off-by: Peng Fan Signed-off-by: Ye Li Cc: Stefano Babic Reviewed-by: Stefano Babic diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c index a01590c..fb1b693 100644 --- a/arch/arm/imx-common/timer.c +++ b/arch/arm/imx-common/timer.c @@ -44,7 +44,8 @@ static inline int gpt_has_clk_source_osc(void) { #if defined(CONFIG_MX6) if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) || - is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul()) + is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() || + is_mx6ull()) return 1; return 0; @@ -83,8 +84,8 @@ int timer_init(void) if (gpt_has_clk_source_osc()) { i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN; - /* For DL/S, SX, UL, set 24Mhz OSC Enable bit and prescaler */ - if (is_mx6sdl() || is_mx6sx() || is_mx6ul()) { + /* For DL/S, SX, UL, ULL set 24Mhz OSC Enable bit and prescaler */ + if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull()) { i |= GPTCR_24MEN; /* Produce 3Mhz clock */ -- cgit v0.10.2 From cdf33c9403d4856c69908f35dd381486c7dc1e2c Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:43 +0800 Subject: imx: mx6ull: skip setting ahb clock Rom already initialized clock at 396M and 132M for arm core and ahb, so skip setting them again in U-Boot. Signed-off-by: Peng Fan Cc: Stefano Babic Reviewed-by: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 5b2a051..fef4eb7 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -343,7 +343,7 @@ int arch_cpu_init(void) */ init_bandgap(); - if (!IS_ENABLED(CONFIG_MX6UL)) { + if (!is_mx6ul() && !is_mx6ull()) { /* * When low freq boot is enabled, ROM will not set AHB * freq, so we need to ensure AHB freq is 132MHz in such -- cgit v0.10.2 From 00ffa56d4b0ffb1518ed9dfc313b0d3d54998879 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:44 +0800 Subject: imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ Since MX6ULL select MX6UL, we can not use IS_ENABLED(CONFIG_MX6UL) here, because this piece code is only for i.MX6UL. Signed-off-by: Peng Fan Cc: Stefano Babic Reviewed-by: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index fef4eb7..109a159 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -356,7 +356,7 @@ int arch_cpu_init(void) set_ahb_rate(132000000); } - if (IS_ENABLED(CONFIG_MX6UL) && is_soc_rev(CHIP_REV_1_0) == 0) { + if (is_mx6ul() && is_soc_rev(CHIP_REV_1_0) == 0) { /* * According to the design team's requirement on i.MX6UL, * the PMIC_STBY_REQ PAD should be configured as open -- cgit v0.10.2 From 6615da4da36d1f0564adeb1b318e14532c3b1f3e Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:45 +0800 Subject: imx: mx6ull: misc soc update Update misc SOC related settings for i.MX6ULL, such as FEC mac address, cpu speed grading and mmdc channel mask clearing. Also update s_init to skip pfd reset. Signed-off-by: Peng Fan Cc: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 109a159..3b56a95 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -126,7 +126,7 @@ u32 get_cpu_speed_grade_hz(void) val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; - if (is_mx6ul()) { + if (is_mx6ul() || is_mx6ull()) { if (val == OCOTP_CFG3_SPEED_528MHZ) return 528000000; else if (val == OCOTP_CFG3_SPEED_696MHZ) @@ -293,7 +293,7 @@ static void clear_mmdc_ch_mask(void) reg = readl(&mxc_ccm->ccdr); /* Clear MMDC channel mask */ - if (is_mx6sx() || is_mx6ul() || is_mx6sl()) + if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl()) reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK); else reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK); @@ -459,7 +459,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) struct fuse_bank4_regs *fuse = (struct fuse_bank4_regs *)bank->fuse_regs; - if ((is_mx6sx() || is_mx6ul()) && dev_id == 1) { + if ((is_mx6sx() || is_mx6ul() || is_mx6ull()) && dev_id == 1) { u32 value = readl(&fuse->mac_addr2); mac[0] = value >> 24 ; mac[1] = value >> 16 ; @@ -523,7 +523,7 @@ void s_init(void) u32 mask528; u32 reg, periph1, periph2; - if (is_mx6sx() || is_mx6ul()) + if (is_mx6sx() || is_mx6ul() || is_mx6ull()) return; /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs -- cgit v0.10.2 From b4714616a09a394f12a1103af14006cee250f516 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:46 +0800 Subject: imx: mx6ull: adjust POR_B setting for i.MX6ULL Adjust POR_B settings on i.MX6ULL according to IC design team's suggestion: 2'b00 : always PUP100K 2'b01 : PUP100K when PMIC_ON_REQ || SOC_NOT_FAIL 2'b10 : always disable PUP100K 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL -- recommended setting Signed-off-by: Peng Fan Signed-off-by: Anson Huang Cc: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 3b56a95..ff1c4f4 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -366,6 +366,20 @@ int arch_cpu_init(void) writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c); } + if (is_mx6ull()) { + /* + * GPBIT[1:0] is suggested to set to 2'b11: + * 2'b00 : always PUP100K + * 2'b01 : PUP100K when PMIC_ON_REQ or SOC_NOT_FAIL + * 2'b10 : always disable PUP100K + * 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL + * register offset is different from i.MX6UL, since + * i.MX6UL is fixed by ECO. + */ + writel(readl(MX6UL_SNVS_LP_BASE_ADDR) | + 0x3, MX6UL_SNVS_LP_BASE_ADDR); + } + /* Set perclk to source from OSC 24MHz */ #if defined(CONFIG_MX6SL) set_preclk_from_osc(); -- cgit v0.10.2 From 3974b7f6e020bd2d2399acdc96a56d6e55ae804f Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:47 +0800 Subject: imx: mx6ull: update clock settings and CCM register map Update Clock settings and CCM register map for i.MX6ULL. Signed-off-by: Peng Fan Signed-off-by: Ye Li Cc: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 9beb6f0..ae3143c 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -97,7 +97,10 @@ void enable_enet_clk(unsigned char enable) { u32 mask, *addr; - if (is_mx6ul()) { + if (is_mx6ull()) { + mask = MXC_CCM_CCGR0_ENET_CLK_ENABLE_MASK; + addr = &imx_ccm->CCGR0; + } else if (is_mx6ul()) { mask = MXC_CCM_CCGR3_ENET_MASK; addr = &imx_ccm->CCGR3; } else { @@ -117,7 +120,7 @@ void enable_uart_clk(unsigned char enable) { u32 mask; - if (is_mx6ul()) + if (is_mx6ul() || is_mx6ull()) mask = MXC_CCM_CCGR5_UART_MASK; else mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK; @@ -168,7 +171,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) reg &= ~mask; __raw_writel(reg, &imx_ccm->CCGR2); } else { - if (is_mx6sx() || is_mx6ul()) { + if (is_mx6sx() || is_mx6ul() || is_mx6ull()) { mask = MXC_CCM_CCGR6_I2C4_MASK; addr = &imx_ccm->CCGR6; } else { @@ -279,7 +282,7 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num) switch (pll) { case PLL_BUS: - if (!is_mx6ul()) { + if (!is_mx6ul() && !is_mx6ull()) { if (pfd_num == 3) { /* No PFD3 on PLL2 */ return 0; @@ -380,7 +383,7 @@ static u32 get_ipg_per_clk(void) reg = __raw_readl(&imx_ccm->cscmr1); if (is_mx6sl() || is_mx6sx() || - is_mx6dqp() || is_mx6ul()) { + is_mx6dqp() || is_mx6ul() || is_mx6ull()) { if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK) return MXC_HCLK; /* OSC 24Mhz */ } @@ -396,7 +399,8 @@ static u32 get_uart_clk(void) u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */ reg = __raw_readl(&imx_ccm->cscdr1); - if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul()) { + if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() || + is_mx6ull()) { if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) freq = MXC_HCLK; } @@ -415,7 +419,8 @@ static u32 get_cspi_clk(void) cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET; - if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul()) { + if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() || + is_mx6ull()) { if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK) return MXC_HCLK / (cspi_podf + 1); } @@ -477,7 +482,7 @@ static u32 get_mmdc_ch0_clk(void) u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div; - if (is_mx6sx() || is_mx6ul() || is_mx6sl()) { + if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl()) { podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) { @@ -615,7 +620,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) debug("mxs_set_lcdclk, freq = %dKHz\n", freq); - if (!is_mx6sx() && !is_mx6ul()) { + if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull()) { debug("This chip not support lcd!\n"); return; } @@ -749,7 +754,7 @@ int enable_lcdif_clock(u32 base_addr) MXC_CCM_CCGR3_DISP_AXI_MASK) : (MXC_CCM_CCGR3_LCDIF1_PIX_MASK | MXC_CCM_CCGR3_DISP_AXI_MASK); - } else if (is_mx6ul()) { + } else if (is_mx6ul() || is_mx6ull()) { if (base_addr != LCDIF1_BASE_ADDR) { puts("Wrong LCD interface!\n"); return -EINVAL; @@ -847,7 +852,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq); } else if (fec_id == 1) { /* Only i.MX6SX/UL support ENET2 */ - if (!(is_mx6sx() || is_mx6ul())) + if (!(is_mx6sx() || is_mx6ul() || is_mx6ull())) return -EINVAL; reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT; reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq); @@ -1069,17 +1074,27 @@ void hab_caam_clock_enable(unsigned char enable) { u32 reg; - /* CG4 ~ CG6, CAAM clocks */ - reg = __raw_readl(&imx_ccm->CCGR0); - if (enable) - reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | - MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | - MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); - else - reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | - MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | - MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); - __raw_writel(reg, &imx_ccm->CCGR0); + if (is_mx6ull()) { + /* CG5, DCP clock */ + reg = __raw_readl(&imx_ccm->CCGR0); + if (enable) + reg |= MXC_CCM_CCGR0_DCP_CLK_MASK; + else + reg &= ~MXC_CCM_CCGR0_DCP_CLK_MASK; + __raw_writel(reg, &imx_ccm->CCGR0); + } else { + /* CG4 ~ CG6, CAAM clocks */ + reg = __raw_readl(&imx_ccm->CCGR0); + if (enable) + reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + else + reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + __raw_writel(reg, &imx_ccm->CCGR0); + } /* EMI slow clk */ reg = __raw_readl(&imx_ccm->CCGR6); diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 22212c2..7a55aec 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -379,6 +379,16 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) /* Define the bits in register CS1CDR */ +/* MX6UL, !MX6ULL */ +#define MXC_CCM_CS1CDR_SAI3_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS1CDR_SAI3_CLK_PRED_OFFSET 22 +#define MXC_CCM_CS1CDR_SAI3_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS1CDR_SAI3_CLK_PODF_OFFSET 16 +#define MXC_CCM_CS1CDR_SAI1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS1CDR_SAI1_CLK_PRED_OFFSET 6 +#define MXC_CCM_CS1CDR_SAI1_CLK_PODF_MASK 0x3F +#define MXC_CCM_CS1CDR_SAI1_CLK_PODF_OFFSET 0 + #define MXC_CCM_CS1CDR_ESAI_CLK_PODF_MASK (0x3F << 25) #define MXC_CCM_CS1CDR_ESAI_CLK_PODF_OFFSET 25 #define MXC_CCM_CS1CDR_SSI3_CLK_PRED_MASK (0x7 << 22) @@ -460,7 +470,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CDCDR_SPDIF1_CLK_SEL_OFFSET 7 /* Define the bits in register CHSCCDR */ -#ifdef CONFIG_MX6SX +/* i.MX6SX */ #define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK (0x7 << 15) #define MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET 15 #define MXC_CCM_CHSCCDR_ENET_PODF_MASK (0x7 << 12) @@ -473,7 +483,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CHSCCDR_M4_PODF_OFFSET 3 #define MXC_CCM_CHSCCDR_M4_CLK_SEL_MASK (0x7) #define MXC_CCM_CHSCCDR_M4_CLK_SEL_OFFSET 0 -#else + #define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_MASK (0x7 << 15) #define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_OFFSET 15 #define MXC_CCM_CHSCCDR_IPU1_DI1_PODF_MASK (0x7 << 12) @@ -486,7 +496,14 @@ struct mxc_ccm_reg { #define MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET 3 #define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK (0x7) #define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET 0 -#endif + +/* i.MX6ULL */ +#define MXC_CCM_CHSCCDR_EPDC_PRE_CLK_SEL_MASK (0x7 << 15) +#define MXC_CCM_CHSCCDR_EPDC_PRE_CLK_SEL_OFFSET 15 +#define MXC_CCM_CHSCCDR_EPDC_PODF_MASK (0x7 << 12) +#define MXC_CCM_CHSCCDR_EPDC_PODF_OFFSET 12 +#define MXC_CCM_CHSCCDR_EPDC_CLK_SEL_MASK (0x7 << 9) +#define MXC_CCM_CHSCCDR_EPDC_CLK_SEL_OFFSET 9 #define CHSCCDR_CLK_SEL_LDB_DI0 3 #define CHSCCDR_PODF_DIVIDE_BY_3 2 @@ -626,6 +643,12 @@ struct mxc_ccm_reg { /* Define the bits in registers CCGRx */ #define MXC_CCM_CCGR_CG_MASK 3 +/* i.MX 6ULL */ +#define MXC_CCM_CCGR0_DCP_CLK_OFFSET 10 +#define MXC_CCM_CCGR0_DCP_CLK_MASK (3 << MXC_CCM_CCGR0_DCP_CLK_OFFSET) +#define MXC_CCM_CCGR0_ENET_CLK_ENABLE_OFFSET 12 +#define MXC_CCM_CCGR0_ENET_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR0_ENET_CLK_ENABLE_OFFSET) + #define MXC_CCM_CCGR0_AIPS_TZ1_OFFSET 0 #define MXC_CCM_CCGR0_AIPS_TZ1_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ1_OFFSET) #define MXC_CCM_CCGR0_AIPS_TZ2_OFFSET 2 @@ -702,13 +725,12 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR1_CANFD_MASK (3 << MXC_CCM_CCGR1_CANFD_OFFSET) #endif -#ifndef CONFIG_MX6SX #define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET 0 #define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET) -#else +/* i.MX6SX/UL */ #define MXC_CCM_CCGR2_CSI_OFFSET 2 #define MXC_CCM_CCGR2_CSI_MASK (3 << MXC_CCM_CCGR2_CSI_OFFSET) -#endif + #ifndef CONFIG_MX6SX #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET 4 #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET) @@ -744,9 +766,18 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET 26 #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET) +/* i.MX6ULL */ +#define MXC_CCM_CCGR2_ESAI_CLK_OFFSET 0 +#define MXC_CCM_CCGR2_ESAI_CLK_MASK (3 << MXC_CCM_CCGR2_ESAI_CLK_OFFSET) +#define MXC_CCM_CCGR2_IOMUXC_SNVS_CLK_OFFSET 4 +#define MXC_CCM_CCGR2_IOMUXC_SNVS_CLK_MASK (3 << MXC_CCM_CCGR2_IOMUXC_SNVS_CLK_OFFSET) + /* Exist on i.MX6SX */ #define MXC_CCM_CCGR3_M4_OFFSET 2 #define MXC_CCM_CCGR3_M4_MASK (3 << MXC_CCM_CCGR3_M4_OFFSET) +/* i.MX6ULL */ +#define MXC_CCM_CCGR3_EPDC_CLK_ENABLE_OFFSET 4 +#define MXC_CCM_CCGR3_EPDC_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR3_EPDC_CLK_ENABLE_OFFSET) #define MXC_CCM_CCGR3_ENET_OFFSET 4 #define MXC_CCM_CCGR3_ENET_MASK (3 << MXC_CCM_CCGR3_ENET_OFFSET) #define MXC_CCM_CCGR3_QSPI_OFFSET 14 @@ -808,7 +839,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR3_OCRAM_OFFSET 28 #define MXC_CCM_CCGR3_OCRAM_MASK (3 << MXC_CCM_CCGR3_OCRAM_OFFSET) -/* GPIO4 on i.MX6UL */ +/* GPIO4 on i.MX6UL/ULL */ #define MXC_CCM_CCGR3_GPIO4_CLK_OFFSET 30 #define MXC_CCM_CCGR3_GPIO4_CLK_MASK (3 << MXC_CCM_CCGR3_GPIO4_CLK_OFFSET) @@ -817,6 +848,10 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET) #endif +/* i.MX6ULL */ +#define MXC_CCM_CCGR3_IOMUXC_SNVS_GPR_CLK_OFFSET 30 +#define MXC_CCM_CCGR3_IOMUXC_SNVS_GPR_CLK_MASK (3 << MXC_CCM_CCGR3_IOMUXC_SNVS_GPR_CLK_OFFSET) + #define MXC_CCM_CCGR4_PCIE_OFFSET 0 #define MXC_CCM_CCGR4_PCIE_MASK (3 << MXC_CCM_CCGR4_PCIE_OFFSET) /* QSPI2 on i.MX6SX */ @@ -883,6 +918,13 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR6_USDHC1_MASK (3 << MXC_CCM_CCGR6_USDHC1_OFFSET) #define MXC_CCM_CCGR6_USDHC2_OFFSET 4 #define MXC_CCM_CCGR6_USDHC2_MASK (3 << MXC_CCM_CCGR6_USDHC2_OFFSET) +#define MXC_CCM_CCGR6_SIM1_CLK_OFFSET 6 +#define MXC_CCM_CCGR6_SIM1_CLK_MASK (3 << MXC_CCM_CCGR6_SIM1_CLK_OFFSET) +#define MXC_CCM_CCGR6_SIM2_CLK_OFFSET 8 +#define MXC_CCM_CCGR6_SIM2_CLK_MASK (3 << MXC_CCM_CCGR6_SIM2_CLK_OFFSET) +/* i.MX6ULL */ +#define MXC_CCM_CCGR6_IPMUX4_CLK_OFFSET 8 +#define MXC_CCM_CCGR6_IPMUX4_CLK_MASK (3 << MXC_CCM_CCGR6_IPMUX4_CLK_OFFSET) /* GPMI/BCH on i.MX6UL */ #define MXC_CCM_CCGR6_BCH_OFFSET 6 #define MXC_CCM_CCGR6_BCH_MASK (3 << MXC_CCM_CCGR6_BCH_OFFSET) @@ -895,6 +937,9 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR6_USDHC4_MASK (3 << MXC_CCM_CCGR6_USDHC4_OFFSET) #define MXC_CCM_CCGR6_EMI_SLOW_OFFSET 10 #define MXC_CCM_CCGR6_EMI_SLOW_MASK (3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET) +/* i.MX6ULL */ +#define MXC_CCM_CCGR6_AIPS_TZ3_CLK_OFFSET 18 +#define MXC_CCM_CCGR6_AIPS_TZ3_CLK_MASK (3 << MXC_CCM_CCGR6_AIPS_TZ3_CLK_OFFSET) /* The following *CCGR6* exist only i.MX6SX */ #define MXC_CCM_CCGR6_PWM8_OFFSET 16 #define MXC_CCM_CCGR6_PWM8_MASK (3 << MXC_CCM_CCGR6_PWM8_OFFSET) -- cgit v0.10.2 From bdfb2d4db2ab24e2eafeca55e494c5555909fcb5 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:48 +0800 Subject: imx: mx6ull: Update memory map address Update memory map address for mx6ull. Signed-off-by: Peng Fan Signed-off-by: Ye Li Cc: Stefano Babic diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 53bf054..3bcb1a8 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -265,6 +265,7 @@ #define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) #define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) #define MX6UL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) +#define MX6ULL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) #ifdef CONFIG_MX6SX #define DEBUG_MONITOR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) #else @@ -318,6 +319,14 @@ #define PWM6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA8000) #define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000) #define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000) +#elif defined(CONFIG_MX6ULL) +#define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000) +#define DCP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000) +#define RNGB_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000) +#define UART8_IPS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000) +#define EPDC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x8C000) +#define IOMUXC_SNVS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x90000) +#define SNVS_GPR_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x94000) #endif /* Only for i.MX6SX */ #define LCDIF2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x24000) @@ -336,10 +345,12 @@ #include /* only for i.MX6SX/UL */ -#define WDOG3_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6UL) ? \ +#define WDOG3_BASE_ADDR ((is_mx6ul() ? \ MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR)) -#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6UL)) ? \ - MX6UL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR) +#define LCDIF1_BASE_ADDR ((is_mx6ul()) ? \ + MX6UL_LCDIF1_BASE_ADDR : \ + ((is_mx6ull()) ? \ + MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)) extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac); -- cgit v0.10.2 From 2d4bbd01a1c2d74bef645296bf72aa33dc5eb7d3 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:49 +0800 Subject: imx: mx6ull: Add AIPS3 initialization Since the mx6ull adds the AIPS3, so enable its initialization. Signed-off-by: Peng Fan Signed-off-by: Ye Li Cc: Stefano Babic diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c index 3d2ce3a..e5dbd93 100644 --- a/arch/arm/imx-common/init.c +++ b/arch/arm/imx-common/init.c @@ -44,7 +44,7 @@ void init_aips(void) writel(0x00000000, &aips2->opacr3); writel(0x00000000, &aips2->opacr4); - if (is_mx6sx() || is_mx7()) { + if (is_mx6ull() || is_mx6sx() || is_mx7()) { /* * Set all MPROTx to be non-bufferable, trusted for R/W, * not forced to user-mode. -- cgit v0.10.2 From 5b66482d44b4e9571c64285254a43bdfe9ed1262 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:50 +0800 Subject: imx: imx6ull: adjust the ldo 1.2v bandgap voltage Per to design team, on i.MX6UL, the LDO 1.2V bandgap voltage is 30mV higher, so we need to adjust the REFTOP_VBGADJ(anatop MISC0 bit[6:4]) setting to 2b'110. Signed-off-by: Peng Fan Signed-off-by: Bai Ping Cc: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index ff1c4f4..bc3e634 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -314,6 +314,12 @@ static void init_bandgap(void) * be set. */ writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set); + /* + * On i.MX6ULL, the LDO 1.2V bandgap voltage is 30mV higher. so set + * VBGADJ bits to 2b'110 to adjust it. + */ + if (is_mx6ull()) + writel(BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ, &anatop->ana_misc0_set); } diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 7a55aec..f74737a 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -1271,6 +1271,7 @@ struct mxc_ccm_reg { (((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC) #define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008 +#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x60 #define BM_PMU_MISC2_AUDIO_DIV_MSB (1 << 23) #define BP_PMU_MISC2_AUDIO_DIV_MSB 23 -- cgit v0.10.2 From 07e1c0ae83faff57477392be87734128db5e1b14 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:51 +0800 Subject: imx: iomux: fix snvs usage for i.MX6ULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SNVS TAMPER pin and BOOT MODE pins are in SNVS IOMUXC module, not in IOMUXC, so correct the related registers' offset. Use IOMUX_CONFIG_LPSR flag for these pins, so we can differentiate them from iomuxc pins. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: "Benoît Thébaudeau" diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index 2612e09..392f4bc 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -42,6 +42,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) #ifdef CONFIG_IOMUX_LPSR u32 lpsr = (pad & MUX_MODE_LPSR) >> MUX_MODE_SHIFT; +#ifdef CONFIG_MX7 if (lpsr == IOMUX_CONFIG_LPSR) { base = (void *)IOMUXC_LPSR_BASE_ADDR; mux_mode &= ~IOMUX_CONFIG_LPSR; @@ -49,9 +50,17 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) if (sel_input_ofs) sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS; } +#else + if (is_mx6ull()) { + if (lpsr == IOMUX_CONFIG_LPSR) { + base = (void *)IOMUXC_SNVS_BASE_ADDR; + mux_mode &= ~IOMUX_CONFIG_LPSR; + } + } +#endif #endif - if (is_soc_type(MXC_SOC_MX7) || mux_ctrl_ofs) + if (is_soc_type(MXC_SOC_MX7) || is_cpu_type(MXC_CPU_MX6ULL) || mux_ctrl_ofs) __raw_writel(mux_mode, base + mux_ctrl_ofs); if (sel_input_ofs) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 3bcb1a8..8bb36eb 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -182,6 +182,7 @@ #define GPIO3_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x24000) #define GPIO4_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x28000) #define GPIO5_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x2C000) +#define MX6UL_SNVS_LP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x30000) #define GPIO6_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x30000) #define GPIO7_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000) #define KPP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x38000) diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 2e49968..e0f8350 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -85,12 +85,12 @@ typedef u64 iomux_v3_cfg_t; #define NO_PAD_CTRL (1 << 17) -#ifdef CONFIG_MX7 - -#define IOMUX_LPSR_SEL_INPUT_OFS 0x70000 #define IOMUX_CONFIG_LPSR 0x8 #define MUX_MODE_LPSR ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \ MUX_MODE_SHIFT) +#ifdef CONFIG_MX7 + +#define IOMUX_LPSR_SEL_INPUT_OFS 0x70000 #define PAD_CTL_DSE_1P8V_140OHM (0x0<<0) #define PAD_CTL_DSE_1P8V_35OHM (0x1<<0) -- cgit v0.10.2 From ca75159d8abc085b39e3e468ca34ccb2940d2bf5 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:52 +0800 Subject: pinctrl: imx6: support i.MX6ULL There two iomuxc for i.MX6ULL. one iomuxc is compatible is i.MX6UL, the other iomuxc is for SVNS usage, similar with the one in mx7. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Simon Glass diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c index 24f139e..32b4754 100644 --- a/drivers/pinctrl/nxp/pinctrl-imx6.c +++ b/drivers/pinctrl/nxp/pinctrl-imx6.c @@ -12,6 +12,10 @@ static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info; +static struct imx_pinctrl_soc_info imx6_snvs_pinctrl_soc_info = { + .flags = ZERO_OFFSET_VALID, +}; + static int imx6_pinctrl_probe(struct udevice *dev) { struct imx_pinctrl_soc_info *info = @@ -26,6 +30,7 @@ static const struct udevice_id imx6_pinctrl_match[] = { { .compatible = "fsl,imx6sl-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info }, { .compatible = "fsl,imx6sx-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info }, { .compatible = "fsl,imx6ul-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info }, + { .compatible = "fsl,imx6ull-iomuxc-snvs", .data = (ulong)&imx6_snvs_pinctrl_soc_info }, { /* sentinel */ } }; -- cgit v0.10.2 From f8ca22b8de322578bc82bed224e803ca9302ee2b Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:53 +0800 Subject: arm: dts: imx6ull: add pinctrl defines Add pinctrl defines for NXP i.MX 6ULL. Since i.MX6ULL reuses some definitions of i.MX6UL, also add i.MX6UL pinctrl defines from linux kernel commit (29b4817d401). Signed-off-by: Peng Fan Cc: Simon Glass Cc: Stefano Babic diff --git a/arch/arm/dts/imx6ul-pinfunc.h b/arch/arm/dts/imx6ul-pinfunc.h new file mode 100644 index 0000000..0034eeb --- /dev/null +++ b/arch/arm/dts/imx6ul-pinfunc.h @@ -0,0 +1,938 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6UL_PINFUNC_H +#define __DTS_IMX6UL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * + */ +#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0 +#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0 + +#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x003c 0x02c8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0040 0x02cc 0x0000 5 0 + +#define MX6UL_PAD_JTAG_MOD__SJC_MOD 0x0044 0x02d0 0x0000 0 0 +#define MX6UL_PAD_JTAG_MOD__GPT2_CLK 0x0044 0x02d0 0x05a0 1 0 +#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT 0x0044 0x02d0 0x0000 2 0 +#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0 +#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0 +#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0 +#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0 +#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0 +#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0 +#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x004c 0x02d8 0x05fc 2 0 +#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2 0x004c 0x02d8 0x0000 3 0 +#define MX6UL_PAD_JTAG_TDO__CCM_STOP 0x004c 0x02d8 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x004c 0x02d8 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x004c 0x02d8 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT 0x004c 0x02d8 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDI__SJC_TDI 0x0050 0x02dc 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1 0x0050 0x02dc 0x0000 1 0 +#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0050 0x02dc 0x05f8 2 0 +#define MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0050 0x02dc 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0050 0x02dc 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x0050 0x02dc 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0 +#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0 +#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0 +#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x05f4 2 0 +#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0 +#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0 +#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0 +#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0 +#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1 +#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0 +#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x005c 0x02e8 0x04b8 2 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1 0x005c 0x02e8 0x0574 3 0 +#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT 0x005c 0x02e8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x005c 0x02e8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN 0x005c 0x02e8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET 0x005c 0x02e8 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B 0x005c 0x02e8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x0060 0x02ec 0x05b0 0 1 +#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1 0x0060 0x02ec 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0060 0x02ec 0x0664 2 0 +#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2 0x0060 0x02ec 0x057c 3 0 +#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT 0x0060 0x02ec 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x0060 0x02ec 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT 0x0060 0x02ec 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET 0x0060 0x02ec 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x0060 0x02ec 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x0064 0x02f0 0x05a4 0 0 +#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2 0x0064 0x02f0 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR 0x0064 0x02f0 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0 +#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0 +#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1 +#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0 +#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0 +#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1 +#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1 +#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x006c 0x02f8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x006c 0x02f8 0x0644 8 2 +#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x0070 0x02fc 0x057c 0 1 +#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x0070 0x02fc 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID 0x0070 0x02fc 0x04bc 2 0 +#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD 0x0070 0x02fc 0x0530 3 0 +#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x0070 0x02fc 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x0070 0x02fc 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT 0x0070 0x02fc 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0070 0x02fc 0x0644 8 3 +#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x0070 0x02fc 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x0074 0x0300 0x0578 0 0 +#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x0074 0x0300 0x0580 1 0 +#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE 0x0074 0x0300 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK 0x0074 0x0300 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP 0x0074 0x0300 0x069c 4 0 +#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0074 0x0300 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT 0x0074 0x0300 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B 0x0074 0x0300 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS 0x0074 0x0300 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS 0x0074 0x0300 0x0620 8 0 +#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0078 0x0304 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0078 0x0304 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE 0x0078 0x0304 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK 0x0078 0x0304 0x0528 3 0 +#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B 0x0078 0x0304 0x0674 4 1 +#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0078 0x0304 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO07__CCM_STOP 0x0078 0x0304 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x0078 0x0304 0x0620 8 1 +#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS 0x0078 0x0304 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x007c 0x0308 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x007c 0x0308 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT 0x007c 0x0308 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC 0x007c 0x0308 0x052c 3 1 +#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x007c 0x0308 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x007c 0x0308 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x007c 0x0308 0x04c0 6 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x007c 0x0308 0x0640 8 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS 0x007c 0x0308 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x0080 0x030c 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x0080 0x030c 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN 0x0080 0x030c 0x0618 2 0 +#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC 0x0080 0x030c 0x0524 3 1 +#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B 0x0080 0x030c 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0080 0x030c 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B 0x0080 0x030c 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0080 0x030c 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS 0x0080 0x030c 0x0640 8 2 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0084 0x0310 0x0000 0 0 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2 +#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0 +#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0 +#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x04c4 3 1 +#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0 +#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0 +#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0088 0x0314 0x0624 0 3 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0 +#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0 +#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0 +#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x04c8 3 1 +#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0 +#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0 +#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0618 8 1 +#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0 +#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2 +#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1 +#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x04d8 3 0 +#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0 +#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x069c 8 1 +#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3 +#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0 +#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1 +#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x04cc 3 1 +#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0 +#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0674 8 2 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0 +#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0 +#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0 +#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x04dc 3 0 +#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1 +#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0 +#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0 +#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0 +#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0 +#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x04e0 3 0 +#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0 +#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0 +#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0 +#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0554 8 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0 +#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0 +#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0 +#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x04e4 3 0 +#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0 +#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0 +#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0 +#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x055c 8 0 +#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1 +#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0 +#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0 +#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0 +#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x04e8 3 0 +#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0 +#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0 +#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0 +#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0558 8 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0 +#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0 +#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0 +#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2 +#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0 +#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0 +#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x04b8 8 1 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0 +#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0 +#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0 +#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0 +#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0 +#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT 0x00a8 0x0334 0x0000 8 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x00ac 0x0338 0x0000 0 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0 +#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0 +#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0 +#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0 +#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0 +#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0 +#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0 +#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x00b0 0x033c 0x0630 0 1 +#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0 +#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0 +#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0 +#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0 +#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0 +#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0 +#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x00b4 0x0340 0x0000 0 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0 +#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0 +#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1 +#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0 +#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0 +#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0 +#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0544 8 1 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0 +#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0 +#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2 +#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0 +#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0 +#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0 +#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0 +#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0 +#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x054c 8 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4 +#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0 +#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2 +#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0 +#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0 +#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0 +#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2 +#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0 +#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0 +#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0548 8 1 +#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1 +#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1 +#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4 +#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1 +#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2 +#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1 +#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0 +#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2 +#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0594 8 1 +#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0590 8 1 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1 +#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD 0x00e4 0x0370 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL 0x00e4 0x0370 0x05b4 3 1 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x00e4 0x0370 0x0578 4 1 +#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x00e4 0x0370 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x00e4 0x0370 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR 0x00e4 0x0370 0x0000 8 0 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0664 8 1 +#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0 +#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B 0x00ec 0x0378 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL 0x00ec 0x0378 0x05bc 3 1 +#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26 0x00ec 0x0378 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x00ec 0x0378 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x00ec 0x0378 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M 0x00ec 0x0378 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x00f0 0x037c 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0x00f0 0x037c 0x0654 1 1 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX 0x00f0 0x037c 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN 0x00f0 0x037c 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA 0x00f0 0x037c 0x05c0 3 1 +#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD 0x00f4 0x0380 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x00f4 0x0380 0x0564 3 0 +#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03 0x00f4 0x0380 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x00f4 0x0380 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x00f4 0x0380 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR 0x00f4 0x0380 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0 +#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0660 8 1 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B 0x00fc 0x0388 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x00fc 0x0388 0x0568 3 0 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2 +#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x04bc 8 1 +#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0 +#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY 0x0100 0x038c 0x0000 8 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x0104 0x0390 0x0000 0 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0 +#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0 +#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2 +#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0 +#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0 +#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0 +#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x0108 0x0394 0x0000 0 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E 0x0108 0x0394 0x0000 1 0 +#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x0108 0x0394 0x063c 2 3 +#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0x0108 0x0394 0x0000 2 0 +#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC 0x0108 0x0394 0x060c 3 0 +#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B 0x0108 0x0394 0x0000 4 0 +#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x0108 0x0394 0x0000 5 0 +#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY 0x0108 0x0394 0x0000 8 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x010c 0x0398 0x05dc 0 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS 0x010c 0x0398 0x0000 1 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x010c 0x0398 0x0000 2 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS 0x010c 0x0398 0x0638 2 2 +#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK 0x010c 0x0398 0x0608 3 0 +#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB 0x010c 0x0398 0x0000 4 0 +#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x010c 0x0398 0x0000 5 0 +#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1 0x010c 0x0398 0x0000 8 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x0110 0x039c 0x0000 0 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1 +#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3 +#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0 +#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0 +#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0 +#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0 +#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x0114 0x03a0 0x0000 0 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_CS 0x0114 0x03a0 0x0000 1 0 +#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI 0x0114 0x03a0 0x0000 2 0 +#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA 0x0114 0x03a0 0x0000 3 0 +#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x0114 0x03a0 0x0000 4 0 +#define MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0114 0x03a0 0x0000 5 0 +#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2 +#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2 +#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x05ec 8 0 +#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2 +#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x05e8 8 0 +#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2 +#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2 +#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04 0x0128 0x03b4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA 0x0128 0x03b4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3 +#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05 0x012c 0x03b8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1 0x012c 0x03b8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2 +#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06 0x0130 0x03bc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2 0x0130 0x03bc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3 +#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0 +#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07 0x0134 0x03c0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2 +#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0584 8 2 +#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0588 8 2 +#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1 +#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1 +#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x068c 8 0 +#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0690 8 0 +#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2 +#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0694 8 0 +#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3 +#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0698 8 0 +#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0678 8 1 +#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0670 8 1 +#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x067c 8 1 +#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2 +#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0 +#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3 +#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0680 8 1 +#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0 +#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0684 8 0 +#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0 +#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0688 8 1 +#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0 +#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2 +#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0 +#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0 +#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0 +#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0 +#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0 +#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0 +#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2 +#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0 +#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0 +#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0 +#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0 +#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2 +#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2 +#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1 +#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2 +#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0190 0x041c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x0190 0x041c 0x068c 1 1 +#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02 0x0190 0x041c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x0190 0x041c 0x0564 3 1 +#define MX6UL_PAD_NAND_DATA04__EIM_AD12 0x0190 0x041c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x0190 0x041c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x0190 0x041c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX 0x0190 0x041c 0x062c 8 2 +#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0194 0x0420 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x0194 0x0420 0x0690 1 1 +#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03 0x0194 0x0420 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x0194 0x0420 0x056c 3 1 +#define MX6UL_PAD_NAND_DATA05__EIM_AD13 0x0194 0x0420 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07 0x0194 0x0420 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x0194 0x0420 0x062c 8 3 +#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX 0x0194 0x0420 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0198 0x0424 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x0198 0x0424 0x0694 1 1 +#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK 0x0198 0x0424 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x0198 0x0424 0x0568 3 1 +#define MX6UL_PAD_NAND_DATA06__EIM_AD14 0x0198 0x0424 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x0198 0x0424 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x0198 0x0424 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS 0x0198 0x0424 0x0628 8 4 +#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1 +#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5 +#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS 0x019c 0x0428 0x0000 8 0 +#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x01a0 0x042c 0x0000 0 0 +#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x01a0 0x042c 0x0000 1 0 +#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS 0x01a0 0x042c 0x0000 2 0 +#define MX6UL_PAD_NAND_ALE__PWM3_OUT 0x01a0 0x042c 0x0000 3 0 +#define MX6UL_PAD_NAND_ALE__EIM_ADDR17 0x01a0 0x042c 0x0000 4 0 +#define MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x01a0 0x042c 0x0000 5 0 +#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1 0x01a0 0x042c 0x0000 8 0 +#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x01a4 0x0430 0x0000 0 0 +#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x01a4 0x0430 0x0000 1 0 +#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x01a4 0x0430 0x0000 2 0 +#define MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x01a4 0x0430 0x0000 3 0 +#define MX6UL_PAD_NAND_WP_B__EIM_BCLK 0x01a4 0x0430 0x0000 4 0 +#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x01a4 0x0430 0x0000 5 0 +#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY 0x01a4 0x0430 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0 +#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0 +#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0 +#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0 +#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0 +#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX 0x01a8 0x0434 0x0634 8 2 +#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x01ac 0x0438 0x0000 0 0 +#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x01ac 0x0438 0x0000 1 0 +#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x01ac 0x0438 0x0000 2 0 +#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x01ac 0x0438 0x0554 3 1 +#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B 0x01ac 0x0438 0x0000 4 0 +#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x01ac 0x0438 0x0000 5 0 +#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x01ac 0x0438 0x0634 8 3 +#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX 0x01ac 0x0438 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x01b0 0x043c 0x0000 0 0 +#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x01b0 0x043c 0x0000 1 0 +#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x01b0 0x043c 0x0000 2 0 +#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x01b0 0x043c 0x055c 3 1 +#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18 0x01b0 0x043c 0x0000 4 0 +#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x01b0 0x043c 0x0000 5 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x01b0 0x043c 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS 0x01b0 0x043c 0x0630 8 2 +#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x01b4 0x0440 0x0000 0 0 +#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x01b4 0x0440 0x0000 1 0 +#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x01b4 0x0440 0x0000 2 0 +#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x01b4 0x0440 0x0558 3 1 +#define MX6UL_PAD_NAND_CLE__EIM_ADDR16 0x01b4 0x0440 0x0000 4 0 +#define MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x01b4 0x0440 0x0000 5 0 +#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x01b4 0x0440 0x0630 8 3 +#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS 0x01b4 0x0440 0x0000 8 0 +#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x01b8 0x0444 0x0000 0 0 +#define MX6UL_PAD_NAND_DQS__CSI_FIELD 0x01b8 0x0444 0x0530 1 1 +#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x01b8 0x0444 0x0000 2 0 +#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0 +#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0 +#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0 +#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0 +#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x061c 8 1 +#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0 +#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0 +#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0 +#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0 +#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0 +#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0 +#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0 +#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0 +#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0 +#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0 +#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0 +#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3 +#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0 +#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0 +#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0664 8 2 +#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0 +#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1 +#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x04b8 8 2 +#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1 +#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1 +#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX 0x01c8 0x0454 0x0584 3 3 +#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22 0x01c8 0x0454 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x01c8 0x0454 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR 0x01c8 0x0454 0x0000 8 0 +#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x01cc 0x0458 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1 0x01cc 0x0458 0x0598 1 1 +#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA 0x01cc 0x0458 0x05f4 2 1 +#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX 0x01cc 0x0458 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0660 8 2 +#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1 +#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0 +#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX 0x01d0 0x045c 0x0588 3 3 +#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x04bc 8 2 +#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0 +#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0 +#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0 +#define MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x01d4 0x0460 0x05a8 3 0 +#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B 0x01d4 0x0460 0x0000 4 0 +#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x01d4 0x0460 0x0000 5 0 +#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL 0x01d4 0x0460 0x0000 6 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x01d4 0x0460 0x0000 8 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x01d4 0x0460 0x064c 8 0 +#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x01d8 0x0464 0x0528 0 1 +#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP 0x01d8 0x0464 0x069c 1 2 +#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B 0x01d8 0x0464 0x0000 2 0 +#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x01d8 0x0464 0x05a4 3 2 +#define MX6UL_PAD_CSI_PIXCLK__EIM_OE 0x01d8 0x0464 0x0000 4 0 +#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x01d8 0x0464 0x0000 5 0 +#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 0x01d8 0x0464 0x0000 6 0 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x01d8 0x0464 0x064c 8 3 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x01d8 0x0464 0x0000 8 0 +#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x01dc 0x0468 0x052c 0 0 +#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x01dc 0x0468 0x0670 1 0 +#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK 0x01dc 0x0468 0x0000 2 0 +#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x01dc 0x0468 0x05b0 3 0 +#define MX6UL_PAD_CSI_VSYNC__EIM_RW 0x01dc 0x0468 0x0000 4 0 +#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x01dc 0x0468 0x0000 5 0 +#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x01dc 0x0468 0x0000 6 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x01dc 0x0468 0x0648 8 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x01dc 0x0468 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x01e0 0x046c 0x0524 0 0 +#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x01e0 0x046c 0x0678 1 0 +#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD 0x01e0 0x046c 0x0000 2 0 +#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x01e0 0x046c 0x05ac 3 0 +#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B 0x01e0 0x046c 0x0000 4 0 +#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x01e0 0x046c 0x0000 5 0 +#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x01e0 0x046c 0x0000 6 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x01e0 0x046c 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x01e0 0x046c 0x0648 8 1 +#define MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x01e4 0x0470 0x04c4 0 0 +#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x01e4 0x0470 0x067c 1 0 +#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B 0x01e4 0x0470 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x01e4 0x0470 0x0544 3 0 +#define MX6UL_PAD_CSI_DATA00__EIM_AD00 0x01e4 0x0470 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x01e4 0x0470 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT 0x01e4 0x0470 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x01e4 0x0470 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX 0x01e4 0x0470 0x0644 8 0 +#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0 +#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0 +#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1 +#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1 +#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x01ec 0x0478 0x0684 1 2 +#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD 0x01ec 0x0478 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x01ec 0x0478 0x054c 3 1 +#define MX6UL_PAD_CSI_DATA02__EIM_AD02 0x01ec 0x0478 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x01ec 0x0478 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC 0x01ec 0x0478 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01ec 0x0478 0x0640 8 5 +#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS 0x01ec 0x0478 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x01f0 0x047c 0x04cc 0 0 +#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x01f0 0x047c 0x0688 1 0 +#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0x01f0 0x047c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x01f0 0x047c 0x0548 3 0 +#define MX6UL_PAD_CSI_DATA03__EIM_AD03 0x01f0 0x047c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x01f0 0x047c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK 0x01f0 0x047c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS 0x01f0 0x047c 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS 0x01f0 0x047c 0x0640 8 0 +#define MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x01f4 0x0480 0x04dc 0 1 +#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4 0x01f4 0x0480 0x068c 1 2 +#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x01f4 0x0480 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x01f4 0x0480 0x0534 3 1 +#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1 +#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x066c 8 2 +#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1 +#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2 +#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1 +#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0668 8 2 +#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1 +#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2 +#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1 +#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1 +#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2 +#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0x0200 0x048c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0200 0x048c 0x0538 3 1 +#define MX6UL_PAD_CSI_DATA07__EIM_AD07 0x0200 0x048c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0200 0x048c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x0200 0x048c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT 0x0200 0x048c 0x0000 8 0 + +#endif /* __DTS_IMX6UL_PINFUNC_H */ diff --git a/arch/arm/dts/imx6ull-pinfunc-snvs.h b/arch/arm/dts/imx6ull-pinfunc-snvs.h new file mode 100644 index 0000000..da3f412 --- /dev/null +++ b/arch/arm/dts/imx6ull-pinfunc-snvs.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H +#define __DTS_IMX6ULL_PINFUNC_SNVS_H +/* + * The pin function ID is a tuple of + * + */ +#define MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x0000 0x0044 0x0000 0x5 0x0 +#define MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x0004 0x0048 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0008 0x004C 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x000C 0x0050 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0010 0x0054 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0014 0x0058 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0018 0x005C 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x001C 0x0060 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0020 0x0064 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0024 0x0068 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0028 0x006C 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x002C 0x0070 0x0000 0x5 0x0 + +#endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */ + diff --git a/arch/arm/dts/imx6ull-pinfunc.h b/arch/arm/dts/imx6ull-pinfunc.h new file mode 100644 index 0000000..fca0036 --- /dev/null +++ b/arch/arm/dts/imx6ull-pinfunc.h @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DTS_IMX6ULL_PINFUNC_H +#define __DTS_IMX6ULL_PINFUNC_H + +#include "imx6ul-pinfunc.h" +/* + * The pin function ID is a tuple of + * + */ +#define MX6UL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 +#define MX6UL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 +#define MX6UL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 +#define MX6UL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0 0x037C 0x0000 0x9 0x0 +#define MX6UL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4 0x0380 0x0000 0x9 0x0 +#define MX6UL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8 0x0384 0x0000 0x9 0x0 +#define MX6UL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC 0x0388 0x0000 0x9 0x0 +#define MX6UL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100 0x038C 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_CLK__EPDC_SDCLK 0x0104 0x0390 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108 0x0394 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C 0x0398 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110 0x039C 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_RESET__EPDC_GDOE 0x0114 0x03A0 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118 0x03A4 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C 0x03A8 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120 0x03AC 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124 0x03B0 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128 0x03B4 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C 0x03B8 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130 0x03BC 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134 0x03C0 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150 0x03DC 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA15__EPDC_GDRL 0x0154 0x03E0 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 +#define MX6UL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 + +#define MX6UL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 +#define MX6UL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 + +#endif /* __DTS_IMX6ULL_PINFUNC_H */ -- cgit v0.10.2 From fa7209117b27115dd4d1f3df4ba57bc61f6c805c Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:54 +0800 Subject: dt-bindings: add i.mx6ul clock header Add i.mx6ul clock header, copied from kernel commit (29b4817d401). i.MX6ULL reuse the file in Linux Kernel, so let's keep the same. Signed-off-by: Peng Fan Cc: Simon Glass Cc: Stefano Babic diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h new file mode 100644 index 0000000..18de070 --- /dev/null +++ b/include/dt-bindings/clock/imx6ul-clock.h @@ -0,0 +1,253 @@ +/* + * Copyright (C) 2015-2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX6UL_H +#define __DT_BINDINGS_CLOCK_IMX6UL_H + +#define IMX6UL_CLK_DUMMY 0 +#define IMX6UL_CLK_CKIL 1 +#define IMX6UL_CLK_CKIH 2 +#define IMX6UL_CLK_OSC 3 +#define IMX6UL_PLL1_BYPASS_SRC 4 +#define IMX6UL_PLL2_BYPASS_SRC 5 +#define IMX6UL_PLL3_BYPASS_SRC 6 +#define IMX6UL_PLL4_BYPASS_SRC 7 +#define IMX6UL_PLL5_BYPASS_SRC 8 +#define IMX6UL_PLL6_BYPASS_SRC 9 +#define IMX6UL_PLL7_BYPASS_SRC 10 +#define IMX6UL_CLK_PLL1 11 +#define IMX6UL_CLK_PLL2 12 +#define IMX6UL_CLK_PLL3 13 +#define IMX6UL_CLK_PLL4 14 +#define IMX6UL_CLK_PLL5 15 +#define IMX6UL_CLK_PLL6 16 +#define IMX6UL_CLK_PLL7 17 +#define IMX6UL_PLL1_BYPASS 18 +#define IMX6UL_PLL2_BYPASS 19 +#define IMX6UL_PLL3_BYPASS 20 +#define IMX6UL_PLL4_BYPASS 21 +#define IMX6UL_PLL5_BYPASS 22 +#define IMX6UL_PLL6_BYPASS 23 +#define IMX6UL_PLL7_BYPASS 24 +#define IMX6UL_CLK_PLL1_SYS 25 +#define IMX6UL_CLK_PLL2_BUS 26 +#define IMX6UL_CLK_PLL3_USB_OTG 27 +#define IMX6UL_CLK_PLL4_AUDIO 28 +#define IMX6UL_CLK_PLL5_VIDEO 29 +#define IMX6UL_CLK_PLL6_ENET 30 +#define IMX6UL_CLK_PLL7_USB_HOST 31 +#define IMX6UL_CLK_USBPHY1 32 +#define IMX6UL_CLK_USBPHY2 33 +#define IMX6UL_CLK_USBPHY1_GATE 34 +#define IMX6UL_CLK_USBPHY2_GATE 35 +#define IMX6UL_CLK_PLL2_PFD0 36 +#define IMX6UL_CLK_PLL2_PFD1 37 +#define IMX6UL_CLK_PLL2_PFD2 38 +#define IMX6UL_CLK_PLL2_PFD3 39 +#define IMX6UL_CLK_PLL3_PFD0 40 +#define IMX6UL_CLK_PLL3_PFD1 41 +#define IMX6UL_CLK_PLL3_PFD2 42 +#define IMX6UL_CLK_PLL3_PFD3 43 +#define IMX6UL_CLK_ENET_REF 44 +#define IMX6UL_CLK_ENET2_REF 45 +#define IMX6UL_CLK_ENET2_REF_125M 46 +#define IMX6UL_CLK_ENET_PTP_REF 47 +#define IMX6UL_CLK_ENET_PTP 48 +#define IMX6UL_CLK_PLL4_POST_DIV 49 +#define IMX6UL_CLK_PLL4_AUDIO_DIV 50 +#define IMX6UL_CLK_PLL5_POST_DIV 51 +#define IMX6UL_CLK_PLL5_VIDEO_DIV 52 +#define IMX6UL_CLK_PLL2_198M 53 +#define IMX6UL_CLK_PLL3_80M 54 +#define IMX6UL_CLK_PLL3_60M 55 +#define IMX6UL_CLK_STEP 56 +#define IMX6UL_CLK_PLL1_SW 57 +#define IMX6UL_CLK_AXI_ALT_SEL 58 +#define IMX6UL_CLK_AXI_SEL 59 +#define IMX6UL_CLK_PERIPH_PRE 60 +#define IMX6UL_CLK_PERIPH2_PRE 61 +#define IMX6UL_CLK_PERIPH_CLK2_SEL 62 +#define IMX6UL_CLK_PERIPH2_CLK2_SEL 63 +#define IMX6UL_CLK_USDHC1_SEL 64 +#define IMX6UL_CLK_USDHC2_SEL 65 +#define IMX6UL_CLK_BCH_SEL 66 +#define IMX6UL_CLK_GPMI_SEL 67 +#define IMX6UL_CLK_EIM_SLOW_SEL 68 +#define IMX6UL_CLK_SPDIF_SEL 69 +#define IMX6UL_CLK_SAI1_SEL 70 +#define IMX6UL_CLK_SAI2_SEL 71 +#define IMX6UL_CLK_SAI3_SEL 72 +#define IMX6UL_CLK_LCDIF_PRE_SEL 73 +#define IMX6UL_CLK_SIM_PRE_SEL 74 +#define IMX6UL_CLK_LDB_DI0_SEL 75 +#define IMX6UL_CLK_LDB_DI1_SEL 76 +#define IMX6UL_CLK_ENFC_SEL 77 +#define IMX6UL_CLK_CAN_SEL 78 +#define IMX6UL_CLK_ECSPI_SEL 79 +#define IMX6UL_CLK_UART_SEL 80 +#define IMX6UL_CLK_QSPI1_SEL 81 +#define IMX6UL_CLK_PERCLK_SEL 82 +#define IMX6UL_CLK_LCDIF_SEL 83 +#define IMX6UL_CLK_SIM_SEL 84 +#define IMX6UL_CLK_PERIPH 85 +#define IMX6UL_CLK_PERIPH2 86 +#define IMX6UL_CLK_LDB_DI0_DIV_3_5 87 +#define IMX6UL_CLK_LDB_DI0_DIV_7 88 +#define IMX6UL_CLK_LDB_DI1_DIV_3_5 89 +#define IMX6UL_CLK_LDB_DI1_DIV_7 90 +#define IMX6UL_CLK_LDB_DI0_DIV_SEL 91 +#define IMX6UL_CLK_LDB_DI1_DIV_SEL 92 +#define IMX6UL_CLK_ARM 93 +#define IMX6UL_CLK_PERIPH_CLK2 94 +#define IMX6UL_CLK_PERIPH2_CLK2 95 +#define IMX6UL_CLK_AHB 96 +#define IMX6UL_CLK_MMDC_PODF 97 +#define IMX6UL_CLK_AXI_PODF 98 +#define IMX6UL_CLK_PERCLK 99 +#define IMX6UL_CLK_IPG 100 +#define IMX6UL_CLK_USDHC1_PODF 101 +#define IMX6UL_CLK_USDHC2_PODF 102 +#define IMX6UL_CLK_BCH_PODF 103 +#define IMX6UL_CLK_GPMI_PODF 104 +#define IMX6UL_CLK_EIM_SLOW_PODF 105 +#define IMX6UL_CLK_SPDIF_PRED 106 +#define IMX6UL_CLK_SPDIF_PODF 107 +#define IMX6UL_CLK_SAI1_PRED 108 +#define IMX6UL_CLK_SAI1_PODF 109 +#define IMX6UL_CLK_SAI2_PRED 110 +#define IMX6UL_CLK_SAI2_PODF 111 +#define IMX6UL_CLK_SAI3_PRED 112 +#define IMX6UL_CLK_SAI3_PODF 113 +#define IMX6UL_CLK_LCDIF_PRED 114 +#define IMX6UL_CLK_LCDIF_PODF 115 +#define IMX6UL_CLK_SIM_PODF 116 +#define IMX6UL_CLK_QSPI1_PDOF 117 +#define IMX6UL_CLK_ENFC_PRED 118 +#define IMX6UL_CLK_ENFC_PODF 119 +#define IMX6UL_CLK_CAN_PODF 120 +#define IMX6UL_CLK_ECSPI_PODF 121 +#define IMX6UL_CLK_UART_PODF 122 +#define IMX6UL_CLK_ADC1 123 +#define IMX6UL_CLK_ADC2 124 +#define IMX6UL_CLK_AIPSTZ1 125 +#define IMX6UL_CLK_AIPSTZ2 126 +#define IMX6UL_CLK_AIPSTZ3 127 +#define IMX6UL_CLK_APBHDMA 128 +#define IMX6UL_CLK_ASRC_IPG 129 +#define IMX6UL_CLK_ASRC_MEM 130 +#define IMX6UL_CLK_GPMI_BCH_APB 131 +#define IMX6UL_CLK_GPMI_BCH 132 +#define IMX6UL_CLK_GPMI_IO 133 +#define IMX6UL_CLK_GPMI_APB 134 +#define IMX6UL_CLK_CAAM_MEM 135 +#define IMX6UL_CLK_CAAM_ACLK 136 +#define IMX6UL_CLK_CAAM_IPG 137 +#define IMX6UL_CLK_CSI 138 +#define IMX6UL_CLK_ECSPI1 139 +#define IMX6UL_CLK_ECSPI2 140 +#define IMX6UL_CLK_ECSPI3 141 +#define IMX6UL_CLK_ECSPI4 142 +#define IMX6UL_CLK_EIM 143 +#define IMX6UL_CLK_ENET 144 +#define IMX6UL_CLK_ENET_AHB 145 +#define IMX6UL_CLK_EPIT1 146 +#define IMX6UL_CLK_EPIT2 147 +#define IMX6UL_CLK_CAN1_IPG 148 +#define IMX6UL_CLK_CAN1_SERIAL 149 +#define IMX6UL_CLK_CAN2_IPG 150 +#define IMX6UL_CLK_CAN2_SERIAL 151 +#define IMX6UL_CLK_GPT1_BUS 152 +#define IMX6UL_CLK_GPT1_SERIAL 153 +#define IMX6UL_CLK_GPT2_BUS 154 +#define IMX6UL_CLK_GPT2_SERIAL 155 +#define IMX6UL_CLK_I2C1 156 +#define IMX6UL_CLK_I2C2 157 +#define IMX6UL_CLK_I2C3 158 +#define IMX6UL_CLK_I2C4 159 +#define IMX6UL_CLK_IOMUXC 160 +#define IMX6UL_CLK_LCDIF_APB 161 +#define IMX6UL_CLK_LCDIF_PIX 162 +#define IMX6UL_CLK_MMDC_P0_FAST 163 +#define IMX6UL_CLK_MMDC_P0_IPG 164 +#define IMX6UL_CLK_OCOTP 165 +#define IMX6UL_CLK_OCRAM 166 +#define IMX6UL_CLK_PWM1 167 +#define IMX6UL_CLK_PWM2 168 +#define IMX6UL_CLK_PWM3 169 +#define IMX6UL_CLK_PWM4 170 +#define IMX6UL_CLK_PWM5 171 +#define IMX6UL_CLK_PWM6 172 +#define IMX6UL_CLK_PWM7 173 +#define IMX6UL_CLK_PWM8 174 +#define IMX6UL_CLK_PXP 175 +#define IMX6UL_CLK_QSPI 176 +#define IMX6UL_CLK_ROM 177 +#define IMX6UL_CLK_SAI1 178 +#define IMX6UL_CLK_SAI1_IPG 179 +#define IMX6UL_CLK_SAI2 180 +#define IMX6UL_CLK_SAI2_IPG 181 +#define IMX6UL_CLK_SAI3 182 +#define IMX6UL_CLK_SAI3_IPG 183 +#define IMX6UL_CLK_SDMA 184 +#define IMX6UL_CLK_SIM 185 +#define IMX6UL_CLK_SIM_S 186 +#define IMX6UL_CLK_SPBA 187 +#define IMX6UL_CLK_SPDIF 188 +#define IMX6UL_CLK_UART1_IPG 189 +#define IMX6UL_CLK_UART1_SERIAL 190 +#define IMX6UL_CLK_UART2_IPG 191 +#define IMX6UL_CLK_UART2_SERIAL 192 +#define IMX6UL_CLK_UART3_IPG 193 +#define IMX6UL_CLK_UART3_SERIAL 194 +#define IMX6UL_CLK_UART4_IPG 195 +#define IMX6UL_CLK_UART4_SERIAL 196 +#define IMX6UL_CLK_UART5_IPG 197 +#define IMX6UL_CLK_UART5_SERIAL 198 +#define IMX6UL_CLK_UART6_IPG 199 +#define IMX6UL_CLK_UART6_SERIAL 200 +#define IMX6UL_CLK_UART7_IPG 201 +#define IMX6UL_CLK_UART7_SERIAL 202 +#define IMX6UL_CLK_UART8_IPG 203 +#define IMX6UL_CLK_UART8_SERIAL 204 +#define IMX6UL_CLK_USBOH3 205 +#define IMX6UL_CLK_USDHC1 206 +#define IMX6UL_CLK_USDHC2 207 +#define IMX6UL_CLK_WDOG1 208 +#define IMX6UL_CLK_WDOG2 209 +#define IMX6UL_CLK_WDOG3 210 +#define IMX6UL_CLK_LDB_DI0 211 +#define IMX6UL_CLK_AXI 212 +#define IMX6UL_CLK_SPDIF_GCLK 213 +#define IMX6UL_CLK_GPT_3M 214 +#define IMX6UL_CLK_SIM2 215 +#define IMX6UL_CLK_SIM1 216 +#define IMX6UL_CLK_IPP_DI0 217 +#define IMX6UL_CLK_IPP_DI1 218 +#define IMX6UL_CA7_SECONDARY_SEL 219 +#define IMX6UL_CLK_PER_BCH 220 +#define IMX6UL_CLK_CSI_SEL 221 +#define IMX6UL_CLK_CSI_PODF 222 +#define IMX6UL_CLK_PLL3_120M 223 +/* For i.MX6ULL */ +#define IMX6UL_CLK_ESAI_SEL 224 +#define IMX6UL_CLK_ESAI_PRED 225 +#define IMX6UL_CLK_ESAI_PODF 226 +#define IMX6UL_CLK_ESAI_EXTAL 227 +#define IMX6UL_CLK_ESAI_MEM 228 +#define IMX6UL_CLK_ESAI_IPG 229 +#define IMX6UL_CLK_DCP_CLK 230 +#define IMX6UL_CLK_EPDC_PRE_SEL 231 +#define IMX6UL_CLK_EPDC_SEL 232 +#define IMX6UL_CLK_EPDC_PODF 233 +#define IMX6UL_CLK_EPDC_ACLK 234 +#define IMX6UL_CLK_EPDC_PIX 235 + +#define IMX6UL_CLK_END 236 + +#endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */ -- cgit v0.10.2 From b0a8e454510e5c4a00ccc4cbc0ec1c19ac520ed6 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:55 +0800 Subject: arm: dts: add device tree for i.MX6ULL Add device tree for i.MX6ULL. Signed-off-by: Peng Fan Cc: Simon Glass Cc: Stefano Babic diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi new file mode 100644 index 0000000..65950e8 --- /dev/null +++ b/arch/arm/dts/imx6ull.dtsi @@ -0,0 +1,1161 @@ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include "imx6ull-pinfunc.h" +#include "imx6ull-pinfunc-snvs.h" +#include "skeleton.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-latency = <61036>; /* two CLK32 periods */ + operating-points = < + /* kHz uV */ + 528000 1175000 + 99000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 528000 1175000 + 99000 1175000 + >; + clocks = <&clks IMX6UL_CLK_ARM>, + <&clks IMX6UL_CLK_PLL2_BUS>, + <&clks IMX6UL_CLK_PLL2_PFD2>, + <&clks IMX6UL_CA7_SECONDARY_SEL>, + <&clks IMX6UL_CLK_STEP>, + <&clks IMX6UL_CLK_PLL1_SW>, + <&clks IMX6UL_CLK_PLL1_SYS>, + <&clks IMX6UL_PLL1_BYPASS>, + <&clks IMX6UL_CLK_PLL1>, + <&clks IMX6UL_PLL1_BYPASS_SRC>, + <&clks IMX6UL_CLK_OSC>; + clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step", + "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc"; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a02000 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + busfreq { + compatible = "fsl,imx_busfreq"; + clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>, + <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>, + <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>, + <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>, + <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>, + <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>, + <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>, + <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>, + <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>, + <&clks IMX6UL_CLK_PLL1>; + clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg", + "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc", + "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel", + "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1"; + fsl,max_ddr_freq = <400000000>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + status = "disabled"; + }; + + ocrams: sram@00900000 { + compatible = "fsl,lpm-sram"; + reg = <0x00900000 0x4000>; + }; + + ocrams_ddr: sram@00904000 { + compatible = "fsl,ddr-lpm-sram"; + reg = <0x00904000 0x1000>; + }; + + ocram: sram@00905000 { + compatible = "mmio-sram"; + reg = <0x00905000 0x1B000>; + }; + + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = , + , + , + ; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6UL_CLK_APBHDMA>; + }; + + gpmi: gpmi-nand@01806000{ + compatible = "fsl,imx6ull-gpmi-nand", "fsl, imx6ul-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = ; + interrupt-names = "bch"; + clocks = <&clks IMX6UL_CLK_GPMI_IO>, + <&clks IMX6UL_CLK_GPMI_APB>, + <&clks IMX6UL_CLK_GPMI_BCH>, + <&clks IMX6UL_CLK_GPMI_BCH_APB>, + <&clks IMX6UL_CLK_PER_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = ; + dmas = <&sdma 41 18 0>, + <&sdma 42 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>, + <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_SPDIF>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI1>, + <&clks IMX6UL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI2>, + <&clks IMX6UL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI3>, + <&clks IMX6UL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI4>, + <&clks IMX6UL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart7: serial@02018000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART7_IPG>, + <&clks IMX6UL_CLK_UART7_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 43 4 0>, <&sdma 44 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART1_IPG>, + <&clks IMX6UL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + esai: esai@02024000 { + compatible = "fsl,imx6ull-esai"; + reg = <0x02024000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ESAI_IPG>, + <&clks IMX6UL_CLK_ESAI_MEM>, + <&clks IMX6UL_CLK_ESAI_EXTAL>, + <&clks IMX6UL_CLK_ESAI_IPG>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "core", "mem", "extal", + "fsys", "dma"; + dmas = <&sdma 0 21 0>, <&sdma 47 21 0>; + dma-names = "rx", "tx"; + dma-source = <&gpr 0 14 0 15>; + status = "disabled"; + }; + + sai1: sai@02028000 { + compatible = "fsl,imx6ul-sai", + "fsl,imx6sx-sai"; + reg = <0x02028000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SAI1_IPG>, + <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SAI1>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 35 24 0>, <&sdma 36 24 0>; + status = "disabled"; + }; + + sai2: sai@0202c000 { + compatible = "fsl,imx6ul-sai", + "fsl,imx6sx-sai"; + reg = <0x0202c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SAI2_IPG>, + <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 37 24 0>, <&sdma 38 24 0>; + status = "disabled"; + }; + + sai3: sai@02030000 { + compatible = "fsl,imx6ul-sai", + "fsl,imx6sx-sai"; + reg = <0x02030000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SAI3_IPG>, + <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SAI3>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 39 24 0>, <&sdma 40 24 0>; + status = "disabled"; + }; + + asrc: asrc@02034000 { + compatible = "fsl,imx53-asrc"; + reg = <0x02034000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ASRC_IPG>, + <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "dma"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + status = "okay"; + }; + }; + + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + status = "disabled"; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_PWM1>, + <&clks IMX6UL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_PWM3>, + <&clks IMX6UL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + flexcan1: can@02090000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, + <&clks IMX6UL_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 1 0x10 17>; + status = "disabled"; + }; + + flexcan2: can@02094000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_CAN2_IPG>, + <&clks IMX6UL_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 2 0x10 18>; + status = "disabled"; + }; + + gpt1: gpt@02098000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt"; + reg = <0x02098000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_GPT1_BUS>, + <&clks IMX6UL_CLK_GPT1_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + snvslp: snvs@020b0000 { + compatible = "fsl,imx6ul-snvs"; + reg = <0x020b0000 0x4000>; + interrupts = ; + }; + + fec2: ethernet@020b4000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x020b4000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET2_REF_125M>, + <&clks IMX6UL_CLK_ENET2_REF_125M>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + stop-mode = <&gpr 0x10 4>; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + fsl,magic-packet; + fsl,wakeup_irq = <0>; + status = "disabled"; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_WDOG1>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = , + , + ; + + reg_3p0: regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBPHY2>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupts = ; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = , ; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = ; + linux,keycode = ; + wakeup; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = ; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = ; + }; + + src: src@020d8000 { + compatible = "fsl,imx6ul-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = , + ; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6ul-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6ul-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + mqs: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + status = "disabled"; + }; + + gpt2: gpt@020e8000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt"; + reg = <0x020e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SDMA>, + <&clks IMX6UL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + pwm5: pwm@020f0000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@020f4000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@020f8000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@020fc000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020fc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + fec1: ethernet@02188000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET_REF>, + <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + stop-mode = <&gpr 0x10 3>; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + fsl,magic-packet; + fsl,wakeup_irq = <0>; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + adc1: adc@02198000 { + compatible = "fsl,imx6ul-adc", "fsl,vf610-adc"; + reg = <0x02198000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ADC1>; + num-channels = <2>; + clock-names = "adc"; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C3>; + status = "disabled"; + }; + + romcp@021ac000 { + compatible = "fsl,imx6ul-romcp", "syscon"; + reg = <0x021ac000 0x4000>; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + weim: weim@021b8000 { + compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>; + }; + + ocotp: ocotp-ctrl@021bc000 { + compatible = "fsl,imx6ull-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6UL_CLK_OCOTP>; + }; + + csu: csu@021c0000 { + compatible = "fsl,imx6ul-csu"; + reg = <0x021c0000 0x4000>; + interrupts = ; + status = "disabled"; + }; + + csi: csi@021c4000 { + compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi"; + reg = <0x021c4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_CSI>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + lcdif: lcdif@021c8000 { + compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + reg = <0x021c8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, + <&clks IMX6UL_CLK_LCDIF_APB>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + pxp: pxp@021cc000 { + compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma"; + reg = <0x021cc000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>; + clock-names = "pxp_ipg", "pxp_axi"; + status = "disabled"; + }; + + qspi: qspi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clocks = <&clks IMX6UL_CLK_QSPI>, + <&clks IMX6UL_CLK_QSPI>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART2_IPG>, + <&clks IMX6UL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART3_IPG>, + <&clks IMX6UL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART4_IPG>, + <&clks IMX6UL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART5_IPG>, + <&clks IMX6UL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C4>; + status = "disabled"; + }; + + uart6: serial@021fc000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021fc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART6_IPG>, + <&clks IMX6UL_CLK_UART6_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + aips3: aips-bus@02200000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02200000 0x100000>; + ranges; + + dcp: dcp@02280000 { + reg = <0x02280000 0x4000>; + interrupts = , + , + ; + /*clocks = <&clks IMX6UL_CLK_DCP>;*/ + clock-names = "dcp"; + status = "disabled"; + }; + + rngb: rngb@02284000 { + reg = <0x02284000 0x4000>; + interrupts = ; + }; + + uart8: serial@02288000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02288000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART8_IPG>, + <&clks IMX6UL_CLK_UART8_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 45 4 0>, <&sdma 46 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + epdc: epdc@0228c000 { + compatible = "fsl,imx7d-epdc"; + interrupts = ; + reg = <0x0228c000 0x4000>; + clocks = <&clks IMX6UL_CLK_EPDC_ACLK>, + <&clks IMX6UL_CLK_EPDC_PIX>; + clock-names = "epdc_axi", "epdc_pix"; + /* Need to fix epdc-ram */ + /* epdc-ram = <&gpr 0x4 30>; */ + status = "disabled"; + }; + + iomuxc_snvs: iomuxc-snvs@02290000 { + compatible = "fsl,imx6ull-iomuxc-snvs"; + reg = <0x02290000 0x10000>; + }; + + snvs_gpr: snvs-gpr@0x02294000 { + compatible = "fsl, imx6ull-snvs-gpr"; + reg = <0x02294000 0x10000>; + }; + }; + }; +}; -- cgit v0.10.2 From 35ae99467dbe9f5674b5cd6fbc9951c0aa8c8269 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:56 +0800 Subject: dm: mmc: intialize dev when probe Need to initialize mmc->dev when probe, or will met "dev_get_uclass_priv: null device", when `mmc dev 1`. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Simon Glass Cc: Jaehoon Chung Reviewed-by: Simon Glass diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 103b32e..9796d39 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -1010,6 +1010,7 @@ static int fsl_esdhc_probe(struct udevice *dev) } upriv->mmc = priv->mmc; + priv->mmc->dev = dev; return 0; } -- cgit v0.10.2 From 55a42b33f2e9b9f6330396fc6d89878a5deacc75 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:57 +0800 Subject: arm: imx: add i.MX6ULL 14x14 EVK board support Add i.MX6ULL EVK board support: Add device tree file, which is copied from NXP Linux. Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR. The uart iomux settings are still keeped in board file. Boot Log: U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800) CPU: Freescale i.MX6ULL rev1.0 at 396MHz CPU: Commercial temperature grade (0C to 95C) at 15C Reset cause: POR Model: Freescale i.MX6 ULL 14x14 EVK Board Board: MX6ULL 14x14 EVK DRAM: 512 MiB MMC: initialized IMX pinctrl driver FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 => mmc dev 1 switch to partitions #0, OK mmc1 is current device Signed-off-by: Peng Fan Cc: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 32405c6..d851b26 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -137,6 +137,12 @@ config TARGET_MX6UL_14X14_EVK select DM_THERMAL select SUPPORT_SPL +config TARGET_MX6ULL_14X14_EVK + bool "Support mx6ull_14x14_evk" + select MX6ULL + select DM + select DM_THERMAL + config TARGET_NITROGEN6X bool "nitrogen6x" @@ -226,6 +232,7 @@ source "board/freescale/mx6slevk/Kconfig" source "board/freescale/mx6sxsabresd/Kconfig" source "board/freescale/mx6sxsabreauto/Kconfig" source "board/freescale/mx6ul_14x14_evk/Kconfig" +source "board/freescale/mx6ullevk/Kconfig" source "board/phytec/pcm058/Kconfig" source "board/gateworks/gw_ventana/Kconfig" source "board/kosagi/novena/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 032c5ae..19140b4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -280,6 +280,8 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \ vf610-twr.dtb \ pcm052.dtb +dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb + dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb \ diff --git a/arch/arm/dts/imx6ull-14x14-evk.dts b/arch/arm/dts/imx6ull-14x14-evk.dts new file mode 100644 index 0000000..375bd4e --- /dev/null +++ b/arch/arm/dts/imx6ull-14x14-evk.dts @@ -0,0 +1,527 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include "imx6ull.dtsi" + +/ { + model = "Freescale i.MX6 ULL 14x14 EVK Board"; + compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_can_3v3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; + }; + + reg_sd1_vmmc: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_gpio_dvfs: regulator-gpio { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dvfs>; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + regulator-name = "gpio_dvfs"; + regulator-type = "voltage"; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + states = <1300000 0x1 1400000 0x0>; + }; + }; + + spi4 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4>; + status = "okay"; + gpio-sck = <&gpio5 11 0>; + gpio-mosi = <&gpio5 10 0>; + cs-gpios = <&gpio5 7 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_spi: gpio_spi@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + oe-gpios = <&gpio5 8 0>; + #gpio-cells = <2>; + reg = <0>; + registers-number = <1>; + registers-default = /bits/ 8 <0x57>; + spi-max-frequency = <100000>; + }; + }; +}; + +&cpu0 { + arm-supply = <®_arm>; + soc-supply = <®_soc>; + dc-supply = <®_gpio_dvfs>; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&gpc { + fsl,cpu_pupscr_sw2iso = <0x1>; + fsl,cpu_pupscr_sw = <0x0>; + fsl,cpu_pdnscr_iso2sw = <0x1>; + fsl,cpu_pdnscr_iso = <0x1>; + fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */ +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + mag3110@0e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + position = <2>; + }; + + fxls8471@1e { + compatible = "fsl,fxls8471"; + reg = <0x1e>; + position = <0>; + interrupt-parent = <&gpio5>; + interrupts = <0 8>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1>; + imx6ul-evk { + pinctrl_hog_1: hoggrp-1 { + fsl,pins = < + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ + MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 + MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 + MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 + MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 + MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 + MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 + MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 + MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 + MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 + MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 + MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 + MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart2dte: uart2dtegrp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default_snvs"; + pinctrl-0 = <&pinctrl_hog_2>; + imx6ul-evk { + pinctrl_hog_2: hoggrp-2 { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000 + >; + }; + + pinctrl_dvfs: dvfsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x79 + >; + }; + + pinctrl_lcdif_reset: lcdifresetgrp { + fsl,pins = < + /* used for lcd reset */ + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_spi4: spi4grp { + fsl,pins = < + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 + >; + }; + + pinctrl_sai2_hp_det_b: sai2_hp_det_grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 + >; + }; + }; +}; + + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl + &pinctrl_lcdif_reset>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + ddrsmp=<0>; + + flash0: n25q256a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + spi-nor,ddr-quad-read-dummy = <6>; + reg = <0>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + /* for DTE mode, add below change */ + /* fsl,dte-mode; */ + /* pinctrl-0 = <&pinctrl_uart2dte>; */ + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + tx-d-cal = <0x5>; +}; + +&usbphy2 { + tx-d-cal = <0x5>; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,wdog_b; +}; diff --git a/board/freescale/mx6ullevk/Kconfig b/board/freescale/mx6ullevk/Kconfig new file mode 100644 index 0000000..7eec497 --- /dev/null +++ b/board/freescale/mx6ullevk/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MX6ULL_14X14_EVK + +config SYS_BOARD + default "mx6ullevk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "mx6ullevk" + +endif diff --git a/board/freescale/mx6ullevk/MAINTAINERS b/board/freescale/mx6ullevk/MAINTAINERS new file mode 100644 index 0000000..4137674 --- /dev/null +++ b/board/freescale/mx6ullevk/MAINTAINERS @@ -0,0 +1,6 @@ +MX6ULLEVK BOARD +M: Peng Fan +S: Maintained +F: board/freescale/mx6ullevk/ +F: include/configs/mx6ullevk.h +F: configs/mx6ull_14x14_evk_defconfig diff --git a/board/freescale/mx6ullevk/Makefile b/board/freescale/mx6ullevk/Makefile new file mode 100644 index 0000000..c64fba4 --- /dev/null +++ b/board/freescale/mx6ullevk/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx6ullevk.o diff --git a/board/freescale/mx6ullevk/imximage.cfg b/board/freescale/mx6ullevk/imximage.cfg new file mode 100644 index 0000000..4604b62 --- /dev/null +++ b/board/freescale/mx6ullevk/imximage.cfg @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +#ifdef CONFIG_SYS_BOOT_QSPI +BOOT_FROM qspi +#elif defined(CONFIG_SYS_BOOT_EIMNOR) +BOOT_FROM nor +#else +BOOT_FROM sd +#endif + +#ifdef CONFIG_USE_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx6ullevk/plugin.bin 0x00907000 +#else + +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* Enable all clocks */ +DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff + +DATA 4 0x020E04B4 0x000C0000 +DATA 4 0x020E04AC 0x00000000 +DATA 4 0x020E027C 0x00000030 +DATA 4 0x020E0250 0x00000030 +DATA 4 0x020E024C 0x00000030 +DATA 4 0x020E0490 0x00000030 +DATA 4 0x020E0288 0x000C0030 +DATA 4 0x020E0270 0x00000000 +DATA 4 0x020E0260 0x00000030 +DATA 4 0x020E0264 0x00000030 +DATA 4 0x020E04A0 0x00000030 +DATA 4 0x020E0494 0x00020000 +DATA 4 0x020E0280 0x00000030 +DATA 4 0x020E0284 0x00000030 +DATA 4 0x020E04B0 0x00020000 +DATA 4 0x020E0498 0x00000030 +DATA 4 0x020E04A4 0x00000030 +DATA 4 0x020E0244 0x00000030 +DATA 4 0x020E0248 0x00000030 +DATA 4 0x021B001C 0x00008000 +DATA 4 0x021B0800 0xA1390003 +DATA 4 0x021B080C 0x00000004 +DATA 4 0x021B083C 0x41640158 +DATA 4 0x021B0848 0x40403237 +DATA 4 0x021B0850 0x40403C33 +DATA 4 0x021B081C 0x33333333 +DATA 4 0x021B0820 0x33333333 +DATA 4 0x021B082C 0xf3333333 +DATA 4 0x021B0830 0xf3333333 +DATA 4 0x021B08C0 0x00944009 +DATA 4 0x021B08b8 0x00000800 +DATA 4 0x021B0004 0x0002002D +DATA 4 0x021B0008 0x1B333030 +DATA 4 0x021B000C 0x676B52F3 +DATA 4 0x021B0010 0xB66D0B63 +DATA 4 0x021B0014 0x01FF00DB +DATA 4 0x021B0018 0x00201740 +DATA 4 0x021B001C 0x00008000 +DATA 4 0x021B002C 0x000026D2 +DATA 4 0x021B0030 0x006B1023 +DATA 4 0x021B0040 0x0000004F +DATA 4 0x021B0000 0x84180000 +DATA 4 0x021B0890 0x00400000 +DATA 4 0x021B001C 0x02008032 +DATA 4 0x021B001C 0x00008033 +DATA 4 0x021B001C 0x00048031 +DATA 4 0x021B001C 0x15208030 +DATA 4 0x021B001C 0x04008040 +DATA 4 0x021B0020 0x00000800 +DATA 4 0x021B0818 0x00000227 +DATA 4 0x021B0004 0x0002552D +DATA 4 0x021B0404 0x00011006 +DATA 4 0x021B001C 0x00000000 + +#endif diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c new file mode 100644 index 0000000..489bf21 --- /dev/null +++ b/board/freescale/mx6ullevk/mx6ullevk.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +int dram_init(void) +{ + gd->ram_size = imx_ddr_size(); + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int mmc_map_to_kernel_blk(int devno) +{ + return devno; +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* Address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"sd1", MAKE_CFGVAL(0x42, 0x20, 0x00, 0x00)}, + {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, + {"qspi1", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int board_late_init(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + setenv("board_name", "EVK"); + setenv("board_rev", "14X14"); +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: MX6ULL 14x14 EVK\n"); + + return 0; +} diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig new file mode 100644 index 0000000..a106b5d --- /dev/null +++ b/configs/mx6ull_14x14_evk_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_MX6ULL_14X14_EVK=y +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ullevk/imximage.cfg" +CONFIG_BOOTDELAY=3 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DM_74X164=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_SPI=y diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h new file mode 100644 index 0000000..ccce954 --- /dev/null +++ b/include/configs/mx6ullevk.h @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX6UL 14x14 EVK board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __MX6ULLEVK_CONFIG_H +#define __MX6ULLEVK_CONFIG_H + + +#include +#include +#include "mx6_common.h" +#include + +#ifdef CONFIG_SECURE_BOOT +#ifndef CONFIG_CSF_SIZE +#define CONFIG_CSF_SIZE 0x4000 +#endif +#endif + +#define PHYS_SDRAM_SIZE SZ_512M + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* MMC Configs */ +#ifdef CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +/* NAND pin conflicts with usdhc2 */ +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#else +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif +#endif + +/* I2C configs */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx6ull-14x14-evk.dtb\0" \ + "fdt_addr=0x83000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_OFFSET (12 * SZ_64K) + +#define CONFIG_CMD_BMODE + +#define CONFIG_IMX_THERMAL + +#define CONFIG_IOMUX_LPSR + +#define CONFIG_SOFT_SPI + +#endif -- cgit v0.10.2 From 81c4eccb55ccbe4a7bb4016b23738c3c57dc364d Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Thu, 15 Sep 2016 15:04:39 -0700 Subject: imx: mx6: fix USB bmode to use reserved value Currently the bmode "usb" uses BOOT_CFG1 to 0x01, -which means BOOT_CFG1[7:4] is set to b0000. According to Table 8-7 Boot Device Selection this is NOR/OneNAND and not Reserved. Use 0x10 which leads to b0001, which is a Reserved boot device. With that the SoC reliably falls back to the serial loader. Cc: Troy Kisky Signed-off-by: Stefan Agner Tested-by: Troy Kisky diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index bc3e634..09f2b02 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -514,7 +514,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) const struct boot_mode soc_boot_modes[] = { {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, /* reserved value should start rom usb */ - {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)}, + {"usb", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, {"ecspi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, {"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)}, -- cgit v0.10.2 From 2ee4065571080b96138d9630db2fdcf6990a1289 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sun, 18 Sep 2016 16:28:28 +0800 Subject: imx-common: enlarge mux width to 4 For i.MX6, the mux width is 4, not 3. So enlarge the width. IOMUX_CONFIG_LPSR is changed from 0x8 to 0x20 to not use bit 3 of mux. Signed-off-by: Peng Fan Cc: Stefano Babic diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index e0f8350..b3af696 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -39,10 +39,9 @@ * MUX_CTRL_OFS: 0..11 (12) * PAD_CTRL_OFS: 12..23 (12) * SEL_INPUT_OFS: 24..35 (12) - * MUX_MODE + SION: 36..40 (5) - * PAD_CTRL + NO_PAD_CTRL: 41..58 (18) - * SEL_INP: 59..62 (4) - * reserved: 63 (1) + * MUX_MODE + SION + LPSR: 36..41 (6) + * PAD_CTRL + NO_PAD_CTRL: 42..59 (18) + * SEL_INP: 60..63 (4) */ typedef u64 iomux_v3_cfg_t; @@ -57,10 +56,10 @@ typedef u64 iomux_v3_cfg_t; MUX_SEL_INPUT_OFS_SHIFT) #define MUX_MODE_SHIFT 36 -#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) -#define MUX_PAD_CTRL_SHIFT 41 +#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x3f << MUX_MODE_SHIFT) +#define MUX_PAD_CTRL_SHIFT 42 #define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x3ffff << MUX_PAD_CTRL_SHIFT) -#define MUX_SEL_INPUT_SHIFT 59 +#define MUX_SEL_INPUT_SHIFT 60 #define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) #define MUX_MODE_SION ((iomux_v3_cfg_t)IOMUX_CONFIG_SION << \ @@ -85,7 +84,7 @@ typedef u64 iomux_v3_cfg_t; #define NO_PAD_CTRL (1 << 17) -#define IOMUX_CONFIG_LPSR 0x8 +#define IOMUX_CONFIG_LPSR 0x20 #define MUX_MODE_LPSR ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \ MUX_MODE_SHIFT) #ifdef CONFIG_MX7 -- cgit v0.10.2 From f15ece388f57a3b35704b5f2306ad462ccf6e2e8 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 28 Sep 2016 09:40:27 +0800 Subject: imx: imx6ul: disable POR_B internal pull up >From TO1.1, SNVS adds internal pull up control for POR_B, the register filed is GPBIT[1:0], after system boot up, it can be set to 2b'01 to disable internal pull up. It can save about 30uA power in SNVS mode. Signed-off-by: Peng Fan Cc: Stefano Babic diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 09f2b02..7b53bfd 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -362,14 +362,27 @@ int arch_cpu_init(void) set_ahb_rate(132000000); } - if (is_mx6ul() && is_soc_rev(CHIP_REV_1_0) == 0) { - /* - * According to the design team's requirement on i.MX6UL, - * the PMIC_STBY_REQ PAD should be configured as open - * drain 100K (0x0000b8a0). - * Only exists on TO1.0 - */ - writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c); + if (is_mx6ul()) { + if (is_soc_rev(CHIP_REV_1_0) == 0) { + /* + * According to the design team's requirement on + * i.MX6UL,the PMIC_STBY_REQ PAD should be configured + * as open drain 100K (0x0000b8a0). + * Only exists on TO1.0 + */ + writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c); + } else { + /* + * From TO1.1, SNVS adds internal pull up control + * for POR_B, the register filed is GPBIT[1:0], + * after system boot up, it can be set to 2b'01 + * to disable internal pull up.It can save about + * 30uA power in SNVS mode. + */ + writel((readl(MX6UL_SNVS_LP_BASE_ADDR + 0x10) & + (~0x1400)) | 0x400, + MX6UL_SNVS_LP_BASE_ADDR + 0x10); + } } if (is_mx6ull()) { -- cgit v0.10.2 From 27f7d4f5f754d0eb124a8aa8e92d0dd578e15286 Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Mon, 26 Sep 2016 09:08:03 +0200 Subject: pcm052: fix MTD partitioning Merge 'spare' into 'bootloader' partition Use same partition for ramdisk and rootfs boot scenarios. Remove 'ramdisk' partition, use 'rootfs' for ramdisk (ramdisk and nand boot scenarios are mutually exclusive). Expand last partition to end of actual NAND size. Adjust UBIFS rootfs boot kernel arguments. Signed-off-by: Albert ARIBAUD (3ADEV) diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index a70c988..0f74988 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -53,14 +53,12 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_MTD_DEVICE #define MTDIDS_DEFAULT "nand0=NAND" -#define MTDPARTS_DEFAULT "mtdparts=NAND:256k(spare)"\ - ",384k(bootloader)"\ +#define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\ ",128k(env1)"\ ",128k(env2)"\ ",128k(dtb)"\ ",6144k(kernel)"\ - ",65536k(ramdisk)"\ - ",450944k(root)" + ",-(root)" #endif #define CONFIG_MMC @@ -144,7 +142,7 @@ "bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \ "nfsroot=${serverip}:${nfs_root},v3,tcp\0" \ "bootargs_nand=setenv bootargs ${bootargs} " \ - "ubi.mtd=6 rootfstype=ubifs root=ubi0:rootfs\0" \ + "ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \ "bootargs_ram=setenv bootargs ${bootargs} " \ "root=/dev/ram rw initrd=${ram_addr}\0" \ "bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ @@ -163,7 +161,7 @@ "bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \ "nand read ${fdt_addr} dtb; " \ "nand read ${kernel_addr} kernel; " \ - "nand read ${ram_addr} ramdisk; " \ + "nand read ${ram_addr} root; " \ "bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \ "update_bootloader_from_tftp=mtdparts default; " \ "nand read ${blsec_addr} bootloader; " \ @@ -195,8 +193,8 @@ "ubi write ${sys_addr} rootfs ${filesize}; fi\0" \ "update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \ "then mtdparts default; " \ - "nand erase.part ramdisk; " \ - "nand write ${ram_addr} ramdisk ${filesize}; fi\0" + "nand erase.part root; " \ + "nand write ${ram_addr} root ${filesize}; fi\0" /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -- cgit v0.10.2 From 083e4fd401f5a29343c28333a5b83693b44bea5a Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Mon, 26 Sep 2016 09:08:04 +0200 Subject: pcm052: remove target-specific dtb name from env Signed-off-by: Albert ARIBAUD (3ADEV) diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 0f74988..7ba8e0a 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -124,7 +124,7 @@ "blimg_addr=0x81000400\0" \ "kernel_file=zImage\0" \ "kernel_addr=0x82000000\0" \ - "fdt_file=vf610-pcm052.dtb\0" \ + "fdt_file=zImage.dtb\0" \ "fdt_addr=0x81000000\0" \ "ram_file=uRamdisk\0" \ "ram_addr=0x83000000\0" \ -- cgit v0.10.2 From 303a24435f3e4b39a6b526ca2a32cd0452713153 Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Mon, 26 Sep 2016 09:08:05 +0200 Subject: pcm052: add 'm4go' command Add the 'm4go' command to pcm052-based targets. It loads scatter file images. Signed-off-by: Albert ARIBAUD (3ADEV) diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c index e4f61e1..7341899 100644 --- a/board/phytec/pcm052/pcm052.c +++ b/board/phytec/pcm052/pcm052.c @@ -513,3 +513,41 @@ int checkboard(void) return 0; } + +static int do_m4go(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + ulong addr; + + /* Consume 'm4go' */ + argc--; argv++; + + /* + * Parse provided address - default to load_addr in case not provided. + */ + + if (argc) + addr = simple_strtoul(argv[0], NULL, 16); + else + addr = load_addr; + + /* + * Write boot address in PERSISTENT_ENTRY1[31:0] aka SRC_GPR2[31:0] + */ + writel(addr + 0x401, 0x4006E028); + + /* + * Start secondary processor by enabling its clock + */ + writel(0x15a5a, 0x4006B08C); + + return 1; +} + +U_BOOT_CMD( + m4go, 2 /* one arg max */, 1 /* repeatable */, do_m4go, + "start the secondary Cortex-M4 from scatter file image", + "[]\n" + " - start secondary Cortex-M4 core using a scatter file image\n" + "The argument needs to be a scatter file\n" +); -- cgit v0.10.2 From ed0c2c0a9ead7d1b5739fc83cf99ac85a16cb979 Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Mon, 26 Sep 2016 09:08:06 +0200 Subject: tools: mkimage: add support for Vybrid image format This format can be flashed directly at address 0 of the NAND FLASH, as it contains all necessary headers. Signed-off-by: Albert ARIBAUD (3ADEV) diff --git a/Makefile b/Makefile index c67cc99..e9cdf9a 100644 --- a/Makefile +++ b/Makefile @@ -845,6 +845,12 @@ endif %.imx: %.bin $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ +%.vyb: %.imx + $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@ + +quiet_cmd_copy = COPY $@ + cmd_copy = cp $< $@ + u-boot.dtb: dts/dt.dtb $(call cmd,copy) diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 8f85862..542b897 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -144,4 +144,7 @@ else ALL-y += u-boot.imx endif endif +ifneq ($(CONFIG_VF610),) +ALL-y += u-boot.vyb +endif endif diff --git a/arch/arm/cpu/armv7/vf610/Makefile b/arch/arm/cpu/armv7/vf610/Makefile index 68cb756..2945377 100644 --- a/arch/arm/cpu/armv7/vf610/Makefile +++ b/arch/arm/cpu/armv7/vf610/Makefile @@ -6,3 +6,8 @@ obj-y += generic.o obj-y += timer.o + +MKIMAGEFLAGS_u-boot.vyb = -T vybridimage + +u-boot.vyb: u-boot.imx + $(call if_changed,mkimage) diff --git a/common/image.c b/common/image.c index a5d19ab..c0ad36a 100644 --- a/common/image.c +++ b/common/image.c @@ -161,6 +161,7 @@ static const table_entry_t uimage_type[] = { { IH_TYPE_RKIMAGE, "rkimage", "Rockchip Boot Image" }, { IH_TYPE_RKSD, "rksd", "Rockchip SD Boot Image" }, { IH_TYPE_RKSPI, "rkspi", "Rockchip SPI Boot Image" }, + { IH_TYPE_VYBRIDIMAGE, "vybridimage", "Vybrid Boot Image", }, { IH_TYPE_ZYNQIMAGE, "zynqimage", "Xilinx Zynq Boot Image" }, { IH_TYPE_ZYNQMPIMAGE, "zynqmpimage", "Xilinx ZynqMP Boot Image" }, { IH_TYPE_FPGA, "fpga", "FPGA Image" }, diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 7ba8e0a..564434c 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -119,9 +119,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ - "blimg_file=u-boot.imx\0" \ - "blsec_addr=0x81000000\0" \ - "blimg_addr=0x81000400\0" \ + "blimg_file=u-boot.vyb\0" \ + "blimg_addr=0x81000000\0" \ "kernel_file=zImage\0" \ "kernel_addr=0x82000000\0" \ "fdt_file=zImage.dtb\0" \ @@ -163,12 +162,11 @@ "nand read ${kernel_addr} kernel; " \ "nand read ${ram_addr} root; " \ "bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \ - "update_bootloader_from_tftp=mtdparts default; " \ - "nand read ${blsec_addr} bootloader; " \ - "mw.b ${blimg_addr} 0xff 0x5FC00; " \ - "if tftp ${blimg_addr} ${tftpdir}${blimg_file}; then " \ + "update_bootloader_from_tftp=if tftp ${blimg_addr} "\ + "${tftpdir}${blimg_file}; then " \ + "mtdparts default; " \ "nand erase.part bootloader; " \ - "nand write ${blsec_addr} bootloader ${filesize}; fi\0" \ + "nand write ${blimg_addr} bootloader ${filesize}; fi\0" \ "update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \ "${kernel_file}; " \ "then mtdparts default; " \ diff --git a/include/image.h b/include/image.h index 64da722..2b1296c 100644 --- a/include/image.h +++ b/include/image.h @@ -278,6 +278,7 @@ enum { IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */ IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */ IH_TYPE_FPGA, /* FPGA Image */ + IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */ IH_TYPE_COUNT, /* Number of image types */ }; diff --git a/tools/Makefile b/tools/Makefile index 421414b..e6f7993 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -89,6 +89,7 @@ dumpimage-mkimage-objs := aisimage.o \ os_support.o \ pblimage.o \ pbl_crc32.o \ + vybridimage.o \ $(ROCKCHIP_OBS) \ socfpgaimage.o \ lib/sha1.o \ diff --git a/tools/vybridimage.c b/tools/vybridimage.c new file mode 100644 index 0000000..a31fc10 --- /dev/null +++ b/tools/vybridimage.c @@ -0,0 +1,164 @@ +/* + * Image manipulator for Vybrid SoCs + * + * Derived from vybridimage.c + * + * (C) Copyright 2016 DENX Software Engineering GmbH + * Written-by: Albert ARIBAUD + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imagetool.h" +#include +#include + +/* + * NAND page 0 boot header + */ + +struct nand_page_0_boot_header { + union { + uint32_t fcb[128]; + uint8_t fcb_bytes[512]; + }; /* 0x00000000 - 0x000001ff */ + uint8_t sw_ecc[512]; /* 0x00000200 - 0x000003ff */ + uint32_t padding[65280]; /* 0x00000400 - 0x0003ffff */ + uint8_t ivt_prefix[1024]; /* 0x00040000 - 0x000403ff */ +}; + +/* signature byte for a readable block */ + +static struct nand_page_0_boot_header vybridimage_header; + +static int vybridimage_check_image_types(uint8_t type) +{ + if (type == IH_TYPE_VYBRIDIMAGE) + return EXIT_SUCCESS; + return EXIT_FAILURE; +} + +static uint8_t vybridimage_sw_ecc(uint8_t byte) +{ + uint8_t bit0 = (byte & (1 << 0)) ? 1 : 0; + uint8_t bit1 = (byte & (1 << 1)) ? 1 : 0; + uint8_t bit2 = (byte & (1 << 2)) ? 1 : 0; + uint8_t bit3 = (byte & (1 << 3)) ? 1 : 0; + uint8_t bit4 = (byte & (1 << 4)) ? 1 : 0; + uint8_t bit5 = (byte & (1 << 5)) ? 1 : 0; + uint8_t bit6 = (byte & (1 << 6)) ? 1 : 0; + uint8_t bit7 = (byte & (1 << 7)) ? 1 : 0; + uint8_t res = 0; + + res |= ((bit6 ^ bit5 ^ bit3 ^ bit2) << 0); + res |= ((bit7 ^ bit5 ^ bit4 ^ bit2 ^ bit1) << 1); + res |= ((bit7 ^ bit6 ^ bit5 ^ bit1 ^ bit0) << 2); + res |= ((bit7 ^ bit4 ^ bit3 ^ bit0) << 3); + res |= ((bit6 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0) << 4); + + return res; +} + +static int vybridimage_verify_header(unsigned char *ptr, int image_size, + struct image_tool_params *params) +{ + struct nand_page_0_boot_header *hdr = + (struct nand_page_0_boot_header *)ptr; + int idx; + + if (hdr->fcb[1] != 0x46434220) + return -1; + if (hdr->fcb[2] != 1) + return -1; + if (hdr->fcb[7] != 64) + return -1; + if (hdr->fcb[14] != 6) + return -1; + if (hdr->fcb[30] != 0x0001ff00) + return -1; + if (hdr->fcb[43] != 1) + return -1; + if (hdr->fcb[54] != 0) + return -1; + if (hdr->fcb[55] != 8) + return -1; + + /* check software ECC */ + for (idx = 0; idx < sizeof(hdr->fcb_bytes); idx++) { + uint8_t sw_ecc = vybridimage_sw_ecc(hdr->fcb_bytes[idx]); + if (sw_ecc != hdr->sw_ecc[idx]) + return -1; + } + + return 0; +} + +static void vybridimage_set_header(void *ptr, struct stat *sbuf, int ifd, + struct image_tool_params *params) +{ + struct nand_page_0_boot_header *hdr = + (struct nand_page_0_boot_header *)ptr; + int idx; + + /* fill header with 0x00 for first 56 entries then 0xff */ + memset(&hdr->fcb[0], 0x0, 56*sizeof(uint32_t)); + memset(&hdr->fcb[56], 0xff, 72*sizeof(uint32_t)); + /* fill SW ecc and padding with 0xff */ + memset(&hdr->sw_ecc[0], 0xff, sizeof(hdr->sw_ecc)); + memset(&hdr->padding[0], 0xff, sizeof(hdr->padding)); + /* fill IVT prefix with 0x00 */ + memset(&hdr->ivt_prefix[0], 0x00, sizeof(hdr->ivt_prefix)); + + /* populate fcb */ + hdr->fcb[1] = 0x46434220; /* signature */ + hdr->fcb[2] = 0x00000001; /* version */ + hdr->fcb[5] = 2048; /* page size */ + hdr->fcb[6] = (2048+64); /* page + OOB size */ + hdr->fcb[7] = 64; /* pages per block */ + hdr->fcb[14] = 6; /* ECC mode 6 */ + hdr->fcb[26] = 128; /* fw address (0x40000) in 2K pages */ + hdr->fcb[27] = 128; /* fw address (0x40000) in 2K pages */ + hdr->fcb[30] = 0x0001ff00; /* DBBT search area start address */ + hdr->fcb[33] = 2048; /* BB marker physical offset */ + hdr->fcb[43] = 1; /* DISBBM */ + hdr->fcb[54] = 0; /* DISBB_Search */ + hdr->fcb[55] = 8; /* Bad block search limit */ + + /* compute software ECC */ + for (idx = 0; idx < sizeof(hdr->fcb_bytes); idx++) + hdr->sw_ecc[idx] = vybridimage_sw_ecc(hdr->fcb_bytes[idx]); +} + +static void vybridimage_print_hdr_field(struct nand_page_0_boot_header *hdr, + int idx) +{ + printf("header.fcb[%d] = %08x\n", idx, hdr->fcb[idx]); +} + +static void vybridimage_print_header(const void *ptr) +{ + struct nand_page_0_boot_header *hdr = + (struct nand_page_0_boot_header *)ptr; + int idx; + + for (idx = 0; idx < 56; idx++) + vybridimage_print_hdr_field(hdr, idx); +} + +/* + * vybridimage parameters + */ +U_BOOT_IMAGE_TYPE( + vybridimage, + "Vybrid Boot Image", + sizeof(vybridimage_header), + (void *)&vybridimage_header, + NULL, + vybridimage_verify_header, + vybridimage_print_header, + vybridimage_set_header, + NULL, + vybridimage_check_image_types, + NULL, + NULL +); -- cgit v0.10.2 From a7e5f7f3e5d2458090d8528a5a892a56911a11ce Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Mon, 26 Sep 2016 09:08:07 +0200 Subject: pcm052: allow specifying onboard DDR size in configs PCM052 SoMs may be equipped with various sizes of DDR. Keep default of 256MB; new PCM052-based targets will specify their actual DDR size. Linux command line is auto-adjusted to DDR size. Signed-off-by: Albert ARIBAUD (3ADEV) diff --git a/board/phytec/pcm052/Kconfig b/board/phytec/pcm052/Kconfig index d67a69a..88524a3 100644 --- a/board/phytec/pcm052/Kconfig +++ b/board/phytec/pcm052/Kconfig @@ -12,4 +12,8 @@ config SYS_SOC config SYS_CONFIG_NAME default "pcm052" +config PCM052_DDR_SIZE + int + default 256 + endif diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 564434c..32f958a 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -134,7 +134,8 @@ "tftptimeout=1000\0" \ "tftptimeoutcountmax=1000000\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "bootargs_base=setenv bootargs rw mem=256M " \ + "bootargs_base=setenv bootargs rw " \ + " mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \ "console=ttyLP1,115200n8\0" \ "bootargs_sd=setenv bootargs ${bootargs} " \ "root=/dev/mmcblk0p2 rootwait\0" \ @@ -218,7 +219,7 @@ /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) -#define PHYS_SDRAM_SIZE (256 * 1024 * 1024) +#define PHYS_SDRAM_SIZE (CONFIG_PCM052_DDR_SIZE * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -- cgit v0.10.2 From 27192d16eb3dacfedfb507f60a325b482bbf317f Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Mon, 26 Sep 2016 09:08:08 +0200 Subject: pcm052: add new BK4r1 target based on PCM052 SoM Signed-off-by: Albert ARIBAUD (3ADEV) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f55d5b2..2d3303b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -595,6 +595,10 @@ config TARGET_PCM052 bool "Support pcm-052" select CPU_V7 +config TARGET_BK4R1 + bool "Support BK4r1" + select CPU_V7 + config ARCH_ZYNQ bool "Xilinx Zynq Platform" select CPU_V7 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 19140b4..efdd1ff 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -278,7 +278,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \ vf610-colibri.dtb \ vf610-twr.dtb \ - pcm052.dtb + pcm052.dtb \ + bk4r1.dtb dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb diff --git a/arch/arm/dts/bk4r1.dts b/arch/arm/dts/bk4r1.dts new file mode 100644 index 0000000..197e5ab --- /dev/null +++ b/arch/arm/dts/bk4r1.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2016 Toradex AG + * + * SPDX-License-Identifier: GPL-2.0+ or X11 + */ + +/dts-v1/; +#include "vf.dtsi" + +/ { + model = "Phytec phyCORE-Vybrid"; + compatible = "phytec,pcm052", "fsl,vf610"; + + chosen { + stdout-path = &uart1; + }; + + aliases { + spi0 = &qspi0; + }; + +}; + +&uart1 { + status = "okay"; +}; + +&qspi0 { + bus-num = <0>; + num-cs = <2>; + status = "okay"; + + qflash0: spi_flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <108000000>; + reg = <0>; + }; + + qflash1: spi_flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <66000000>; + reg = <1>; + }; +}; diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi index d7d21a3..000aff2 100644 --- a/arch/arm/dts/vf.dtsi +++ b/arch/arm/dts/vf.dtsi @@ -83,7 +83,9 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; - reg = <0x40044000 0x1000>; + reg = <0x40044000 0x1000>, + <0x20000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; status = "disabled"; }; diff --git a/board/phytec/pcm052/Kconfig b/board/phytec/pcm052/Kconfig index 88524a3..212f994 100644 --- a/board/phytec/pcm052/Kconfig +++ b/board/phytec/pcm052/Kconfig @@ -17,3 +17,23 @@ config PCM052_DDR_SIZE default 256 endif + +if TARGET_BK4R1 + +config SYS_BOARD + default "pcm052" + +config SYS_VENDOR + default "phytec" + +config SYS_SOC + default "vf610" + +config SYS_CONFIG_NAME + default "bk4r1" + +config PCM052_DDR_SIZE + int + default 512 + +endif diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c index 7341899..e75ff4f 100644 --- a/board/phytec/pcm052/pcm052.c +++ b/board/phytec/pcm052/pcm052.c @@ -152,57 +152,6 @@ static struct ddrmc_phy_setting pcm052_phy_settings[] = { int dram_init(void) { - static const struct ddr3_jedec_timings pcm052_ddr_timings = { - .tinit = 5, - .trst_pwron = 80000, - .cke_inactive = 200000, - .wrlat = 5, - .caslat_lin = 12, - .trc = 6, - .trrd = 4, - .tccd = 4, - .tbst_int_interval = 4, - .tfaw = 18, - .trp = 6, - .twtr = 4, - .tras_min = 15, - .tmrd = 4, - .trtp = 4, - .tras_max = 14040, - .tmod = 12, - .tckesr = 4, - .tcke = 3, - .trcd_int = 6, - .tras_lockout = 1, - .tdal = 10, - .bstlen = 3, - .tdll = 512, - .trp_ab = 6, - .tref = 1542, - .trfc = 64, - .tref_int = 5, - .tpdex = 3, - .txpdll = 10, - .txsnr = 68, - .txsr = 506, - .cksrx = 5, - .cksre = 5, - .freq_chg_en = 1, - .zqcl = 256, - .zqinit = 512, - .zqcs = 64, - .ref_per_zq = 64, - .zqcs_rotate = 1, - .aprebit = 10, - .cmd_age_cnt = 255, - .age_cnt = 255, - .q_fullness = 0, - .odt_rd_mapcs0 = 1, - .odt_wr_mapcs0 = 1, - .wlmrd = 40, - .wldqsen = 25, - }; - static const iomux_v3_cfg_t pcm052_pads[] = { PCM052_VF610_PAD_DDR_A15__DDR_A_15, PCM052_VF610_PAD_DDR_A14__DDR_A_14, @@ -256,11 +205,126 @@ int dram_init(void) PCM052_VF610_PAD_DDR_RESETB, }; - imx_iomux_v3_setup_multiple_pads(pcm052_pads, ARRAY_SIZE(pcm052_pads)); +#if defined(CONFIG_TARGET_PCM052) + + static const struct ddr3_jedec_timings pcm052_ddr_timings = { + .tinit = 5, + .trst_pwron = 80000, + .cke_inactive = 200000, + .wrlat = 5, + .caslat_lin = 12, + .trc = 6, + .trrd = 4, + .tccd = 4, + .tbst_int_interval = 4, + .tfaw = 18, + .trp = 6, + .twtr = 4, + .tras_min = 15, + .tmrd = 4, + .trtp = 4, + .tras_max = 14040, + .tmod = 12, + .tckesr = 4, + .tcke = 3, + .trcd_int = 6, + .tras_lockout = 1, + .tdal = 10, + .bstlen = 3, + .tdll = 512, + .trp_ab = 6, + .tref = 1542, + .trfc = 64, + .tref_int = 5, + .tpdex = 3, + .txpdll = 10, + .txsnr = 68, + .txsr = 506, + .cksrx = 5, + .cksre = 5, + .freq_chg_en = 1, + .zqcl = 256, + .zqinit = 512, + .zqcs = 64, + .ref_per_zq = 64, + .zqcs_rotate = 1, + .aprebit = 10, + .cmd_age_cnt = 255, + .age_cnt = 255, + .q_fullness = 0, + .odt_rd_mapcs0 = 1, + .odt_wr_mapcs0 = 1, + .wlmrd = 40, + .wldqsen = 25, + }; ddrmc_ctrl_init_ddr3(&pcm052_ddr_timings, pcm052_cr_settings, pcm052_phy_settings, 1, 2); +#elif defined(CONFIG_TARGET_BK4R1) + + static const struct ddr3_jedec_timings pcm052_ddr_timings = { + .tinit = 5, + .trst_pwron = 80000, + .cke_inactive = 200000, + .wrlat = 5, + .caslat_lin = 12, + .trc = 6, + .trrd = 4, + .tccd = 4, + .tbst_int_interval = 0, + .tfaw = 16, + .trp = 6, + .twtr = 4, + .tras_min = 15, + .tmrd = 4, + .trtp = 4, + .tras_max = 28080, + .tmod = 12, + .tckesr = 4, + .tcke = 3, + .trcd_int = 6, + .tras_lockout = 1, + .tdal = 12, + .bstlen = 3, + .tdll = 512, + .trp_ab = 6, + .tref = 3120, + .trfc = 104, + .tref_int = 0, + .tpdex = 3, + .txpdll = 10, + .txsnr = 108, + .txsr = 512, + .cksrx = 5, + .cksre = 5, + .freq_chg_en = 1, + .zqcl = 256, + .zqinit = 512, + .zqcs = 64, + .ref_per_zq = 64, + .zqcs_rotate = 1, + .aprebit = 10, + .cmd_age_cnt = 255, + .age_cnt = 255, + .q_fullness = 0, + .odt_rd_mapcs0 = 1, + .odt_wr_mapcs0 = 1, + .wlmrd = 40, + .wldqsen = 25, + }; + + ddrmc_ctrl_init_ddr3(&pcm052_ddr_timings, pcm052_cr_settings, + pcm052_phy_settings, 1, 1); + +#else /* Unknown PCM052 variant */ + +#error DDR characteristics undefined for this target. Please define them. + +#endif + + imx_iomux_v3_setup_multiple_pads(pcm052_pads, ARRAY_SIZE(pcm052_pads)); + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig new file mode 100644 index 0000000..26d9e81 --- /dev/null +++ b/configs/bk4r1_defconfig @@ -0,0 +1,33 @@ +CONFIG_ARM=y +CONFIG_TARGET_BK4R1=y +CONFIG_DEFAULT_DEVICE_TREE="bk4r1" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND" +CONFIG_BOOTDELAY=3 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_VYBRID_GPIO=y +CONFIG_NAND_VF610_NFC=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_CMD_DM=y +CONFIG_CMD_UBI=y diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h new file mode 100644 index 0000000..5861eeb --- /dev/null +++ b/include/configs/bk4r1.h @@ -0,0 +1,33 @@ +/* + * Copyright 2016 3ADEV + * Written-by: Albert ARIBAUD + * + * Configuration settings for the phytec PCM-052 SoM-based BK4R1. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Define the BK4r1-specific env commands */ +#define PCM052_EXTRA_ENV_SETTINGS \ + "set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \ + "set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0" + +/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/ +#define PCM052_BOOTCOMMAND "run set_gpio103; sf probe; " + +/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */ +#define PCM052_NET_INIT "run set_gpio122; " + +/* add NOR to MTD env */ +#define MTDIDS_DEFAULT "nand0=NAND,nor0=NOR" +#define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\ + ",128k(env1)"\ + ",128k(env2)"\ + ",128k(dtb)"\ + ",6144k(kernel)"\ + ",-(root);"\ + "NOR:-(nor)" + +/* now include standard PCM052 config */ + +#include "configs/pcm052.h" diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 32f958a..0372e43 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -52,7 +52,12 @@ #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_PARTITIONS #define CONFIG_MTD_DEVICE + +#ifndef MTDIDS_DEFAULT #define MTDIDS_DEFAULT "nand0=NAND" +#endif + +#ifndef MTDPARTS_DEFAULT #define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\ ",128k(env1)"\ ",128k(env2)"\ @@ -61,6 +66,8 @@ ",-(root)" #endif +#endif + #define CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -85,7 +92,6 @@ /* QSPI Configs*/ #ifdef CONFIG_FSL_QSPI -#define CONFIG_SPI_FLASH #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_SYS_FSL_QSPI_LE @@ -115,8 +121,31 @@ #define CONFIG_SYS_TEXT_BASE 0x3f408000 #define CONFIG_BOARD_SIZE_LIMIT 524288 -#define CONFIG_BOOTCOMMAND "run bootcmd_sd" +/* if no target-specific extra environment settings were defined by the + target, define an empty one */ +#ifndef PCM052_EXTRA_ENV_SETTINGS +#define PCM052_EXTRA_ENV_SETTINGS +#endif + +/* if no target-specific boot command was defined by the target, + define an empty one */ +#ifndef PCM052_BOOTCOMMAND +#define PCM052_BOOTCOMMAND +#endif + +/* if no target-specific extra environment settings were defined by the + target, define an empty one */ +#ifndef PCM052_NET_INIT +#define PCM052_NET_INIT +#endif + +/* boot command, including the target-defined one if any */ +#define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand" + +/* Extra env settings (including the target-defined ones if any) */ #define CONFIG_EXTRA_ENV_SETTINGS \ + PCM052_EXTRA_ENV_SETTINGS \ + "autoload=no\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "blimg_file=u-boot.vyb\0" \ @@ -163,7 +192,8 @@ "nand read ${kernel_addr} kernel; " \ "nand read ${ram_addr} root; " \ "bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \ - "update_bootloader_from_tftp=if tftp ${blimg_addr} "\ + "update_bootloader_from_tftp=" PCM052_NET_INIT \ + "if tftp ${blimg_addr} "\ "${tftpdir}${blimg_file}; then " \ "mtdparts default; " \ "nand erase.part bootloader; " \ @@ -176,7 +206,8 @@ "if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \ "nand erase.part dtb; " \ "nand write ${fdt_addr} dtb ${filesize}; fi\0" \ - "update_kernel_from_tftp=if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \ + "update_kernel_from_tftp=" PCM052_NET_INIT \ + "if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \ "then setenv fdtsize ${filesize}; " \ "if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \ "mtdparts default; " \ @@ -184,13 +215,15 @@ "nand write ${fdt_addr} dtb ${fdtsize}; " \ "nand erase.part kernel; " \ "nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \ - "update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \ + "update_rootfs_from_tftp=" PCM052_NET_INIT \ + "if tftp ${sys_addr} ${tftpdir}${filesys}; " \ "then mtdparts default; " \ "nand erase.part root; " \ "ubi part root; " \ "ubi create rootfs; " \ "ubi write ${sys_addr} rootfs ${filesize}; fi\0" \ - "update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \ + "update_ramdisk_from_tftp=" PCM052_NET_INIT \ + "if tftp ${ram_addr} ${tftpdir}${ram_file}; " \ "then mtdparts default; " \ "nand erase.part root; " \ "nand write ${ram_addr} root ${filesize}; fi\0" -- cgit v0.10.2 From 5b0d03b306b8d3010835d8b191bfc0581735021f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 5 Oct 2016 15:00:58 -0300 Subject: udoo: Add a README file Add a README file to explain how to build and flash the SD card for Udoo boards. Signed-off-by: Fabio Estevam diff --git a/board/udoo/README b/board/udoo/README new file mode 100644 index 0000000..6fbcc59 --- /dev/null +++ b/board/udoo/README @@ -0,0 +1,21 @@ +How to use U-Boot on MX6Q/DL Udoo boards +---------------------------------------- + +- Build U-Boot for MX6Q/DL Udoo boards: + +$ make mrproper +$ make udoo_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot.img image into the SD card: + +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Insert the SD card in the board, power it up and U-Boot messages should +come up. -- cgit v0.10.2 From a99546ab6294e11b71dfbeee7f2432b1f028f65d Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:03 -0700 Subject: dm: imx: serial: support device tree Support instatiation through device tree. Also parse the fsl,dte-mode property to determine whether DTE mode shall be used. Signed-off-by: Stefan Agner Reviewed-by: Simon Glass diff --git a/doc/device-tree-bindings/serial/mxc-serial.txt b/doc/device-tree-bindings/serial/mxc-serial.txt new file mode 100644 index 0000000..ede92a4 --- /dev/null +++ b/doc/device-tree-bindings/serial/mxc-serial.txt @@ -0,0 +1,8 @@ +NXP i.MX (MXC) UART + +Required properties: +- compatible: must be "fsl,imx7d-uart" +- reg: start address and size of the registers + +Optional properties: +- fsl,dte-mode: use DTE mode diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index 8545714..4fd2b1d 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -108,6 +108,8 @@ #define UTS_RXFULL (1<<3) /* RxFIFO full */ #define UTS_SOFTRST (1<<0) /* Software reset */ +DECLARE_GLOBAL_DATA_PTR; + #ifndef CONFIG_DM_SERIAL #ifndef CONFIG_MXC_UART_BASE @@ -135,8 +137,6 @@ #define UBRC 0xac /* Baud Rate Count Register */ #define UTS 0xb4 /* UART Test Register (mx31) */ -DECLARE_GLOBAL_DATA_PTR; - #define TXTL 2 /* reset default */ #define RXTL 1 /* reset default */ #define RFDIV 4 /* divide input clock by 2 */ @@ -347,9 +347,37 @@ static const struct dm_serial_ops mxc_serial_ops = { .setbrg = mxc_serial_setbrg, }; +#if CONFIG_IS_ENABLED(OF_CONTROL) +static int mxc_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct mxc_serial_platdata *plat = dev->platdata; + fdt_addr_t addr; + + addr = dev_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + plat->reg = (struct mxc_uart *)addr; + + plat->use_dte = fdtdec_get_bool(gd->fdt_blob, dev->of_offset, + "fsl,dte-mode"); + return 0; +} + +static const struct udevice_id mxc_serial_ids[] = { + { .compatible = "fsl,imx7d-uart" }, + { } +}; +#endif + U_BOOT_DRIVER(serial_mxc) = { .name = "serial_mxc", .id = UCLASS_SERIAL, +#if CONFIG_IS_ENABLED(OF_CONTROL) + .of_match = mxc_serial_ids, + .ofdata_to_platdata = mxc_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct mxc_serial_platdata), +#endif .probe = mxc_serial_probe, .ops = &mxc_serial_ops, .flags = DM_FLAG_PRE_RELOC, -- cgit v0.10.2 From 5a6f8d7b3b2914deaec60ea9986729b8f4cff2fc Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:04 -0700 Subject: pinctrl: imx: do not announce driver initialization It is not usual that drivers announce when they have been initialized. use dev_dbg to announce device initialization. Signed-off-by: Stefan Agner Reviewed-by: Simon Glass diff --git a/drivers/pinctrl/nxp/pinctrl-imx.c b/drivers/pinctrl/nxp/pinctrl-imx.c index 40b0616..949d0f3 100644 --- a/drivers/pinctrl/nxp/pinctrl-imx.c +++ b/drivers/pinctrl/nxp/pinctrl-imx.c @@ -222,7 +222,7 @@ int imx_pinctrl_probe(struct udevice *dev, return -ENOMEM; } - dev_info(dev, "initialized IMX pinctrl driver\n"); + dev_dbg(dev, "initialized IMX pinctrl driver\n"); return 0; } -- cgit v0.10.2 From bdad02e1e2aa2c4efc3fe8752c1340cc558e39dc Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:05 -0700 Subject: arm: dts: imx7: add pinctrl defines Add pinctrl defines for NXP i.MX 7Solo/7Dual SoC. The pinctrl format is compatible to the Linux kernel, hence this file is a simple copy from the Linux kernel (commit 97f5c1817b7e). Signed-off-by: Stefan Agner diff --git a/arch/arm/dts/imx7d-pinfunc.h b/arch/arm/dts/imx7d-pinfunc.h new file mode 100644 index 0000000..32d2464 --- /dev/null +++ b/arch/arm/dts/imx7d-pinfunc.h @@ -0,0 +1,1151 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DTS_IMX7D_PINFUNC_H +#define __DTS_IMX7D_PINFUNC_H + +/* + * The pin function ID is a tuple of + * + */ + +#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX 0x0014 0x026C 0x0704 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX 0x0014 0x026C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__I2C3_SCL 0x0014 0x026C 0x05E4 0x4 0x0 +#define MX7D_PAD_GPIO1_IO08__KPP_COL5 0x0014 0x026C 0x0608 0x6 0x0 +#define MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x0014 0x026C 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x0018 0x0270 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO09__SD1_LCTL 0x0018 0x0270 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3 0x0018 0x0270 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX 0x0018 0x0270 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX 0x0018 0x0270 0x0704 0x3 0x1 +#define MX7D_PAD_GPIO1_IO09__I2C3_SDA 0x0018 0x0270 0x05E8 0x4 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY 0x0018 0x0270 0x04F4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO09__KPP_ROW5 0x0018 0x0270 0x0628 0x6 0x0 +#define MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x0018 0x0270 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x001C 0x0274 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO10__SD2_LCTL 0x001C 0x0274 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x001C 0x0274 0x0568 0x2 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS 0x001C 0x0274 0x0700 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS 0x001C 0x0274 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__I2C4_SCL 0x001C 0x0274 0x05EC 0x4 0x0 +#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA 0x001C 0x0274 0x05A4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO10__KPP_COL6 0x001C 0x0274 0x060C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x001C 0x0274 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0020 0x0278 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO11__SD3_LCTL 0x0020 0x0278 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x0020 0x0278 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS 0x0020 0x0278 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS 0x0020 0x0278 0x0700 0x3 0x1 +#define MX7D_PAD_GPIO1_IO11__I2C4_SDA 0x0020 0x0278 0x05F0 0x4 0x0 +#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB 0x0020 0x0278 0x05A8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO11__KPP_ROW6 0x0020 0x0278 0x062C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0020 0x0278 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0024 0x027C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT 0x0024 0x027C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x0024 0x027C 0x0564 0x2 0x0 +#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0024 0x027C 0x04DC 0x3 0x0 +#define MX7D_PAD_GPIO1_IO12__CM4_NMI 0x0024 0x027C 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1 0x0024 0x027C 0x04E4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5 0x0024 0x027C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID 0x0024 0x027C 0x0734 0x7 0x0 +#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0028 0x0280 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT 0x0028 0x0280 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2 0x0028 0x0280 0x0570 0x2 0x0 +#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0028 0x0280 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY 0x0028 0x0280 0x04F4 0x4 0x1 +#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2 0x0028 0x0280 0x04E8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL 0x0028 0x0280 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID 0x0028 0x0280 0x0730 0x7 0x0 +#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x002C 0x0284 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO14__SD3_CD_B 0x002C 0x0284 0x0738 0x1 0x0 +#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO 0x002C 0x0284 0x0574 0x2 0x0 +#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x002C 0x0284 0x04E0 0x3 0x0 +#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B 0x002C 0x0284 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3 0x002C 0x0284 0x04EC 0x5 0x0 +#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0 0x002C 0x0284 0x06D8 0x6 0x0 +#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x0030 0x0288 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO15__SD3_WP 0x0030 0x0288 0x073C 0x1 0x0 +#define MX7D_PAD_GPIO1_IO15__ENET2_MDC 0x0030 0x0288 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0030 0x0288 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B 0x0030 0x0288 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4 0x0030 0x0288 0x04F0 0x5 0x0 +#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1 0x0030 0x0288 0x06DC 0x6 0x0 +#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA00__KPP_ROW3 0x0034 0x02A4 0x0620 0x3 0x0 +#define MX7D_PAD_EPDC_DATA00__EIM_AD0 0x0034 0x02A4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x0034 0x02A4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA00__LCD_DATA0 0x0034 0x02A4 0x0638 0x6 0x0 +#define MX7D_PAD_EPDC_DATA00__LCD_CLK 0x0034 0x02A4 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1 0x0038 0x02A8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK 0x0038 0x02A8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x0038 0x02A8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA01__KPP_COL3 0x0038 0x02A8 0x0600 0x3 0x0 +#define MX7D_PAD_EPDC_DATA01__EIM_AD1 0x0038 0x02A8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x0038 0x02A8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA01__LCD_DATA1 0x0038 0x02A8 0x063C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE 0x0038 0x02A8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2 0x003C 0x02AC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B 0x003C 0x02AC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x003C 0x02AC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA02__KPP_ROW2 0x003C 0x02AC 0x061C 0x3 0x0 +#define MX7D_PAD_EPDC_DATA02__EIM_AD2 0x003C 0x02AC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x003C 0x02AC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA02__LCD_DATA2 0x003C 0x02AC 0x0640 0x6 0x0 +#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC 0x003C 0x02AC 0x0698 0x7 0x0 +#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3 0x0040 0x02B0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN 0x0040 0x02B0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x0040 0x02B0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA03__KPP_COL2 0x0040 0x02B0 0x05FC 0x3 0x0 +#define MX7D_PAD_EPDC_DATA03__EIM_AD3 0x0040 0x02B0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x0040 0x02B0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA03__LCD_DATA3 0x0040 0x02B0 0x0644 0x6 0x0 +#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC 0x0040 0x02B0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4 0x0044 0x02B4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD 0x0044 0x02B4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS 0x0044 0x02B4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA04__KPP_ROW1 0x0044 0x02B4 0x0618 0x3 0x0 +#define MX7D_PAD_EPDC_DATA04__EIM_AD4 0x0044 0x02B4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x0044 0x02B4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA04__LCD_DATA4 0x0044 0x02B4 0x0648 0x6 0x0 +#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL 0x0044 0x02B4 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5 0x0048 0x02B8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD 0x0048 0x02B8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x0048 0x02B8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA05__KPP_COL1 0x0048 0x02B8 0x05F8 0x3 0x0 +#define MX7D_PAD_EPDC_DATA05__EIM_AD5 0x0048 0x02B8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x0048 0x02B8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA05__LCD_DATA5 0x0048 0x02B8 0x064C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE 0x0048 0x02B8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6 0x004C 0x02BC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK 0x004C 0x02BC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x004C 0x02BC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA06__KPP_ROW0 0x004C 0x02BC 0x0614 0x3 0x0 +#define MX7D_PAD_EPDC_DATA06__EIM_AD6 0x004C 0x02BC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x004C 0x02BC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA06__LCD_DATA6 0x004C 0x02BC 0x0650 0x6 0x0 +#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B 0x004C 0x02BC 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7 0x0050 0x02C0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B 0x0050 0x02C0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x0050 0x02C0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA07__KPP_COL0 0x0050 0x02C0 0x05F4 0x3 0x0 +#define MX7D_PAD_EPDC_DATA07__EIM_AD7 0x0050 0x02C0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x0050 0x02C0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA07__LCD_DATA7 0x0050 0x02C0 0x0654 0x6 0x0 +#define MX7D_PAD_EPDC_DATA07__JTAG_DONE 0x0050 0x02C0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8 0x0054 0x02C4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD 0x0054 0x02C4 0x06E4 0x1 0x0 +#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0 0x0054 0x02C4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x0054 0x02C4 0x071C 0x3 0x0 +#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX 0x0054 0x02C4 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA08__EIM_OE 0x0054 0x02C4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x0054 0x02C4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA08__LCD_DATA8 0x0054 0x02C4 0x0658 0x6 0x0 +#define MX7D_PAD_EPDC_DATA08__LCD_BUSY 0x0054 0x02C4 0x0634 0x7 0x0 +#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK 0x0054 0x02C4 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9 0x0058 0x02C8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK 0x0058 0x02C8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1 0x0058 0x02C8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x0058 0x02C8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX 0x0058 0x02C8 0x071C 0x3 0x1 +#define MX7D_PAD_EPDC_DATA09__EIM_RW 0x0058 0x02C8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x0058 0x02C8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA09__LCD_DATA9 0x0058 0x02C8 0x065C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA09__LCD_DATA0 0x0058 0x02C8 0x0638 0x7 0x1 +#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE 0x0058 0x02C8 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10 0x005C 0x02CC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B 0x005C 0x02CC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2 0x005C 0x02CC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x005C 0x02CC 0x0718 0x3 0x0 +#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS 0x005C 0x02CC 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B 0x005C 0x02CC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x005C 0x02CC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA10__LCD_DATA10 0x005C 0x02CC 0x0660 0x6 0x0 +#define MX7D_PAD_EPDC_DATA10__LCD_DATA9 0x005C 0x02CC 0x065C 0x7 0x1 +#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE 0x005C 0x02CC 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11 0x0060 0x02D0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN 0x0060 0x02D0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3 0x0060 0x02D0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x0060 0x02D0 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS 0x0060 0x02D0 0x0718 0x3 0x1 +#define MX7D_PAD_EPDC_DATA11__EIM_BCLK 0x0060 0x02D0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x0060 0x02D0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA11__LCD_DATA11 0x0060 0x02D0 0x0664 0x6 0x0 +#define MX7D_PAD_EPDC_DATA11__LCD_DATA1 0x0060 0x02D0 0x063C 0x7 0x1 +#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0 0x0060 0x02D0 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12 0x0064 0x02D4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD 0x0064 0x02D4 0x06E0 0x1 0x0 +#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS 0x0064 0x02D4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x0064 0x02D4 0x0724 0x3 0x0 +#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX 0x0064 0x02D4 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B 0x0064 0x02D4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x0064 0x02D4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA12__LCD_DATA12 0x0064 0x02D4 0x0668 0x6 0x0 +#define MX7D_PAD_EPDC_DATA12__LCD_DATA21 0x0064 0x02D4 0x068C 0x7 0x0 +#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK 0x0064 0x02D4 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13 0x0068 0x02D8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD 0x0068 0x02D8 0x06EC 0x1 0x0 +#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK 0x0068 0x02D8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x0068 0x02D8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX 0x0068 0x02D8 0x0724 0x3 0x1 +#define MX7D_PAD_EPDC_DATA13__EIM_WAIT 0x0068 0x02D8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x0068 0x02D8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA13__LCD_DATA13 0x0068 0x02D8 0x066C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA13__LCD_CS 0x0068 0x02D8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE 0x0068 0x02D8 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14 0x006C 0x02DC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK 0x006C 0x02DC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B 0x006C 0x02DC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x006C 0x02DC 0x0720 0x3 0x0 +#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS 0x006C 0x02DC 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0 0x006C 0x02DC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x006C 0x02DC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA14__LCD_DATA14 0x006C 0x02DC 0x0670 0x6 0x0 +#define MX7D_PAD_EPDC_DATA14__LCD_DATA22 0x006C 0x02DC 0x0690 0x7 0x0 +#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP 0x006C 0x02DC 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15 0x0070 0x02E0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B 0x0070 0x02E0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B 0x0070 0x02E0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x0070 0x02E0 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS 0x0070 0x02E0 0x0720 0x3 0x1 +#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B 0x0070 0x02E0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x0070 0x02E0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA15__LCD_DATA15 0x0070 0x02E0 0x0674 0x6 0x0 +#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN 0x0070 0x02E0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM 0x0070 0x02E0 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK 0x0074 0x02E4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN 0x0074 0x02E4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x0074 0x02E4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4 0x0074 0x02E4 0x0624 0x3 0x0 +#define MX7D_PAD_EPDC_SDCLK__EIM_AD10 0x0074 0x02E4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x0074 0x02E4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCLK__LCD_CLK 0x0074 0x02E4 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20 0x0074 0x02E4 0x0688 0x7 0x0 +#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE 0x0078 0x02E8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD 0x0078 0x02E8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x0078 0x02E8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDLE__KPP_COL4 0x0078 0x02E8 0x0604 0x3 0x0 +#define MX7D_PAD_EPDC_SDLE__EIM_AD11 0x0078 0x02E8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x0078 0x02E8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDLE__LCD_DATA16 0x0078 0x02E8 0x0678 0x6 0x0 +#define MX7D_PAD_EPDC_SDLE__LCD_DATA8 0x0078 0x02E8 0x0658 0x7 0x1 +#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE 0x007C 0x02EC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0 0x007C 0x02EC 0x0584 0x1 0x0 +#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x007C 0x02EC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDOE__KPP_COL5 0x007C 0x02EC 0x0608 0x3 0x1 +#define MX7D_PAD_EPDC_SDOE__EIM_AD12 0x007C 0x02EC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x007C 0x02EC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDOE__LCD_DATA17 0x007C 0x02EC 0x067C 0x6 0x0 +#define MX7D_PAD_EPDC_SDOE__LCD_DATA23 0x007C 0x02EC 0x0694 0x7 0x0 +#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR 0x0080 0x02F0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1 0x0080 0x02F0 0x0588 0x1 0x0 +#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x0080 0x02F0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5 0x0080 0x02F0 0x0628 0x3 0x1 +#define MX7D_PAD_EPDC_SDSHR__EIM_AD13 0x0080 0x02F0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x0080 0x02F0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18 0x0080 0x02F0 0x0680 0x6 0x0 +#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10 0x0080 0x02F0 0x0660 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0 0x0084 0x02F4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2 0x0084 0x02F4 0x058C 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x0084 0x02F4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE0__EIM_AD14 0x0084 0x02F4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x0084 0x02F4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19 0x0084 0x02F4 0x0684 0x6 0x0 +#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5 0x0084 0x02F4 0x064C 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1 0x0088 0x02F8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3 0x0088 0x02F8 0x0590 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x0088 0x02F8 0x0578 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER 0x0088 0x02F8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_SDCE1__EIM_AD15 0x0088 0x02F8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x0088 0x02F8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20 0x0088 0x02F8 0x0688 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4 0x0088 0x02F8 0x0648 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2 0x008C 0x02FC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN 0x008C 0x02FC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x008C 0x02FC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE2__KPP_COL6 0x008C 0x02FC 0x060C 0x3 0x1 +#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16 0x008C 0x02FC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x008C 0x02FC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21 0x008C 0x02FC 0x068C 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3 0x008C 0x02FC 0x0644 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3 0x0090 0x0300 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD 0x0090 0x0300 0x06E8 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x0090 0x0300 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6 0x0090 0x0300 0x062C 0x3 0x1 +#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17 0x0090 0x0300 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x0090 0x0300 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22 0x0090 0x0300 0x0690 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2 0x0090 0x0300 0x0640 0x7 0x1 +#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0094 0x0304 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0 0x0094 0x0304 0x05AC 0x1 0x0 +#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x0094 0x0304 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDCLK__KPP_COL7 0x0094 0x0304 0x0610 0x3 0x0 +#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18 0x0094 0x0304 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x0094 0x0304 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23 0x0094 0x0304 0x0694 0x6 0x1 +#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16 0x0094 0x0304 0x0678 0x7 0x1 +#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE 0x0098 0x0308 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1 0x0098 0x0308 0x05B0 0x1 0x0 +#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x0098 0x0308 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDOE__KPP_ROW7 0x0098 0x0308 0x0630 0x3 0x0 +#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19 0x0098 0x0308 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x0098 0x0308 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN 0x0098 0x0308 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_GDOE__LCD_DATA18 0x0098 0x0308 0x0680 0x7 0x1 +#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL 0x009C 0x030C 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2 0x009C 0x030C 0x05B4 0x1 0x0 +#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x009C 0x030C 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20 0x009C 0x030C 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x009C 0x030C 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDRL__LCD_RD_E 0x009C 0x030C 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_GDRL__LCD_DATA19 0x009C 0x030C 0x0684 0x7 0x1 +#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP 0x00A0 0x0310 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3 0x00A0 0x0310 0x05B8 0x1 0x0 +#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x00A0 0x0310 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER 0x00A0 0x0310 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21 0x00A0 0x0310 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x00A0 0x0310 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDSP__LCD_BUSY 0x00A0 0x0310 0x0634 0x6 0x1 +#define MX7D_PAD_EPDC_GDSP__LCD_DATA17 0x00A0 0x0310 0x067C 0x7 0x1 +#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0 0x00A4 0x0314 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK 0x00A4 0x0314 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2 0x00A4 0x0314 0x0570 0x3 0x1 +#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22 0x00A4 0x0314 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x00A4 0x0314 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_BDR0__LCD_CS 0x00A4 0x0314 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_BDR0__LCD_DATA7 0x00A4 0x0314 0x0654 0x7 0x1 +#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1 0x00A8 0x0318 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN 0x00A8 0x0318 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK 0x00A8 0x0318 0x0578 0x2 0x1 +#define MX7D_PAD_EPDC_BDR1__EIM_AD8 0x00A8 0x0318 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x00A8 0x0318 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE 0x00A8 0x0318 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_BDR1__LCD_DATA6 0x00A8 0x0318 0x0650 0x7 0x1 +#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00AC 0x031C 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA 0x00AC 0x031C 0x05CC 0x1 0x0 +#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS 0x00AC 0x031C 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9 0x00AC 0x031C 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x00AC 0x031C 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC 0x00AC 0x031C 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11 0x00AC 0x031C 0x0664 0x7 0x1 +#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00B0 0x0320 0x0580 0x0 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB 0x00B0 0x0320 0x05D0 0x1 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL 0x00B0 0x0320 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1 0x00B0 0x0320 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x00B0 0x0320 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC 0x00B0 0x0320 0x0698 0x6 0x1 +#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12 0x00B0 0x0320 0x0668 0x7 0x1 +#define MX7D_PAD_LCD_CLK__LCD_CLK 0x00B4 0x0324 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x00B4 0x0324 0x0558 0x1 0x0 +#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN 0x00B4 0x0324 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_CLK__CSI_DATA16 0x00B4 0x0324 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_CLK__UART2_DCE_RX 0x00B4 0x0324 0x06FC 0x4 0x0 +#define MX7D_PAD_LCD_CLK__UART2_DTE_TX 0x00B4 0x0324 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_CLK__GPIO3_IO0 0x00B4 0x0324 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x00B8 0x0328 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x00B8 0x0328 0x055C 0x1 0x0 +#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN 0x00B8 0x0328 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_ENABLE__CSI_DATA17 0x00B8 0x0328 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x00B8 0x0328 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX 0x00B8 0x0328 0x06FC 0x4 0x1 +#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1 0x00B8 0x0328 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x00BC 0x032C 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x00BC 0x032C 0x0554 0x1 0x0 +#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN 0x00BC 0x032C 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_HSYNC__CSI_DATA18 0x00BC 0x032C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS 0x00BC 0x032C 0x06F8 0x4 0x0 +#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS 0x00BC 0x032C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00BC 0x032C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x00C0 0x0330 0x0698 0x0 0x2 +#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0 0x00C0 0x0330 0x0560 0x1 0x0 +#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN 0x00C0 0x0330 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_VSYNC__CSI_DATA19 0x00C0 0x0330 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS 0x00C0 0x0330 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS 0x00C0 0x0330 0x06F8 0x4 0x1 +#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00C0 0x0330 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_RESET__LCD_RESET 0x00C4 0x0334 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1 0x00C4 0x0334 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI 0x00C4 0x0334 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_RESET__CSI_FIELD 0x00C4 0x0334 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_RESET__EIM_DTACK_B 0x00C4 0x0334 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_RESET__GPIO3_IO4 0x00C4 0x0334 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA00__LCD_DATA0 0x00C8 0x0338 0x0638 0x0 0x2 +#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2 0x00C8 0x0338 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA00__CSI_DATA20 0x00C8 0x0338 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA00__EIM_DATA0 0x00C8 0x0338 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x00C8 0x0338 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0 0x00C8 0x0338 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA01__LCD_DATA1 0x00CC 0x033C 0x063C 0x0 0x2 +#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3 0x00CC 0x033C 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA01__CSI_DATA21 0x00CC 0x033C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA01__EIM_DATA1 0x00CC 0x033C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x00CC 0x033C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1 0x00CC 0x033C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA02__LCD_DATA2 0x00D0 0x0340 0x0640 0x0 0x2 +#define MX7D_PAD_LCD_DATA02__GPT1_CLK 0x00D0 0x0340 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA02__CSI_DATA22 0x00D0 0x0340 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA02__EIM_DATA2 0x00D0 0x0340 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA02__GPIO3_IO7 0x00D0 0x0340 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2 0x00D0 0x0340 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA03__LCD_DATA3 0x00D4 0x0344 0x0644 0x0 0x2 +#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1 0x00D4 0x0344 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA03__CSI_DATA23 0x00D4 0x0344 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA03__EIM_DATA3 0x00D4 0x0344 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA03__GPIO3_IO8 0x00D4 0x0344 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3 0x00D4 0x0344 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA04__LCD_DATA4 0x00D8 0x0348 0x0648 0x0 0x2 +#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2 0x00D8 0x0348 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA04__CSI_VSYNC 0x00D8 0x0348 0x0520 0x3 0x0 +#define MX7D_PAD_LCD_DATA04__EIM_DATA4 0x00D8 0x0348 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA04__GPIO3_IO9 0x00D8 0x0348 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4 0x00D8 0x0348 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA05__LCD_DATA5 0x00DC 0x034C 0x064C 0x0 0x2 +#define MX7D_PAD_LCD_DATA05__CSI_HSYNC 0x00DC 0x034C 0x0518 0x3 0x0 +#define MX7D_PAD_LCD_DATA05__EIM_DATA5 0x00DC 0x034C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x00DC 0x034C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5 0x00DC 0x034C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA06__LCD_DATA6 0x00E0 0x0350 0x0650 0x0 0x2 +#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK 0x00E0 0x0350 0x051C 0x3 0x0 +#define MX7D_PAD_LCD_DATA06__EIM_DATA6 0x00E0 0x0350 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA06__GPIO3_IO11 0x00E0 0x0350 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6 0x00E0 0x0350 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA07__LCD_DATA7 0x00E4 0x0354 0x0654 0x0 0x2 +#define MX7D_PAD_LCD_DATA07__CSI_MCLK 0x00E4 0x0354 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA07__EIM_DATA7 0x00E4 0x0354 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x00E4 0x0354 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7 0x00E4 0x0354 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA08__LCD_DATA8 0x00E8 0x0358 0x0658 0x0 0x2 +#define MX7D_PAD_LCD_DATA08__CSI_DATA9 0x00E8 0x0358 0x0514 0x3 0x0 +#define MX7D_PAD_LCD_DATA08__EIM_DATA8 0x00E8 0x0358 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA08__GPIO3_IO13 0x00E8 0x0358 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8 0x00E8 0x0358 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA09__LCD_DATA9 0x00EC 0x035C 0x065C 0x0 0x2 +#define MX7D_PAD_LCD_DATA09__CSI_DATA8 0x00EC 0x035C 0x0510 0x3 0x0 +#define MX7D_PAD_LCD_DATA09__EIM_DATA9 0x00EC 0x035C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x00EC 0x035C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9 0x00EC 0x035C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA10__LCD_DATA10 0x00F0 0x0360 0x0660 0x0 0x2 +#define MX7D_PAD_LCD_DATA10__CSI_DATA7 0x00F0 0x0360 0x050C 0x3 0x0 +#define MX7D_PAD_LCD_DATA10__EIM_DATA10 0x00F0 0x0360 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA10__GPIO3_IO15 0x00F0 0x0360 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x00F0 0x0360 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA11__LCD_DATA11 0x00F4 0x0364 0x0664 0x0 0x2 +#define MX7D_PAD_LCD_DATA11__CSI_DATA6 0x00F4 0x0364 0x0508 0x3 0x0 +#define MX7D_PAD_LCD_DATA11__EIM_DATA11 0x00F4 0x0364 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA11__GPIO3_IO16 0x00F4 0x0364 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x00F4 0x0364 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA12__LCD_DATA12 0x00F8 0x0368 0x0668 0x0 0x2 +#define MX7D_PAD_LCD_DATA12__CSI_DATA5 0x00F8 0x0368 0x0504 0x3 0x0 +#define MX7D_PAD_LCD_DATA12__EIM_DATA12 0x00F8 0x0368 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA12__GPIO3_IO17 0x00F8 0x0368 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x00F8 0x0368 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA13__LCD_DATA13 0x00FC 0x036C 0x066C 0x0 0x1 +#define MX7D_PAD_LCD_DATA13__CSI_DATA4 0x00FC 0x036C 0x0500 0x3 0x0 +#define MX7D_PAD_LCD_DATA13__EIM_DATA13 0x00FC 0x036C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA13__GPIO3_IO18 0x00FC 0x036C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x00FC 0x036C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA14__LCD_DATA14 0x0100 0x0370 0x0670 0x0 0x1 +#define MX7D_PAD_LCD_DATA14__CSI_DATA3 0x0100 0x0370 0x04FC 0x3 0x0 +#define MX7D_PAD_LCD_DATA14__EIM_DATA14 0x0100 0x0370 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA14__GPIO3_IO19 0x0100 0x0370 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0100 0x0370 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA15__LCD_DATA15 0x0104 0x0374 0x0674 0x0 0x1 +#define MX7D_PAD_LCD_DATA15__CSI_DATA2 0x0104 0x0374 0x04F8 0x3 0x0 +#define MX7D_PAD_LCD_DATA15__EIM_DATA15 0x0104 0x0374 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0104 0x0374 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0104 0x0374 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA16__LCD_DATA16 0x0108 0x0378 0x0678 0x0 0x2 +#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4 0x0108 0x0378 0x0594 0x1 0x0 +#define MX7D_PAD_LCD_DATA16__CSI_DATA1 0x0108 0x0378 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA16__EIM_CRE 0x0108 0x0378 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA16__GPIO3_IO21 0x0108 0x0378 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16 0x0108 0x0378 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA17__LCD_DATA17 0x010C 0x037C 0x067C 0x0 0x2 +#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5 0x010C 0x037C 0x0598 0x1 0x0 +#define MX7D_PAD_LCD_DATA17__CSI_DATA0 0x010C 0x037C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN 0x010C 0x037C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x010C 0x037C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17 0x010C 0x037C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA18__LCD_DATA18 0x0110 0x0380 0x0680 0x0 0x2 +#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6 0x0110 0x0380 0x059C 0x1 0x0 +#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO 0x0110 0x0380 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA18__CSI_DATA15 0x0110 0x0380 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA18__EIM_CS2_B 0x0110 0x0380 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x0110 0x0380 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18 0x0110 0x0380 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA19__EIM_CS3_B 0x0114 0x0384 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0114 0x0384 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19 0x0114 0x0384 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA19__LCD_DATA19 0x0114 0x0384 0x0684 0x0 0x2 +#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7 0x0114 0x0384 0x05A0 0x1 0x0 +#define MX7D_PAD_LCD_DATA19__CSI_DATA14 0x0114 0x0384 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA20__EIM_ADDR23 0x0118 0x0388 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x0118 0x0388 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA20__I2C3_SCL 0x0118 0x0388 0x05E4 0x6 0x1 +#define MX7D_PAD_LCD_DATA20__LCD_DATA20 0x0118 0x0388 0x0688 0x0 0x2 +#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4 0x0118 0x0388 0x05BC 0x1 0x0 +#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT 0x0118 0x0388 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA20__CSI_DATA13 0x0118 0x0388 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA21__LCD_DATA21 0x011C 0x038C 0x068C 0x0 0x2 +#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5 0x011C 0x038C 0x05C0 0x1 0x0 +#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT 0x011C 0x038C 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA21__CSI_DATA12 0x011C 0x038C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA21__EIM_ADDR24 0x011C 0x038C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x011C 0x038C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA21__I2C3_SDA 0x011C 0x038C 0x05E8 0x6 0x1 +#define MX7D_PAD_LCD_DATA22__LCD_DATA22 0x0120 0x0390 0x0690 0x0 0x2 +#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6 0x0120 0x0390 0x05C4 0x1 0x0 +#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT 0x0120 0x0390 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA22__CSI_DATA11 0x0120 0x0390 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA22__EIM_ADDR25 0x0120 0x0390 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0120 0x0390 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA22__I2C4_SCL 0x0120 0x0390 0x05EC 0x6 0x1 +#define MX7D_PAD_LCD_DATA23__LCD_DATA23 0x0124 0x0394 0x0694 0x0 0x2 +#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7 0x0124 0x0394 0x05C8 0x1 0x0 +#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT 0x0124 0x0394 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA23__CSI_DATA10 0x0124 0x0394 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1 +#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x06F4 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0 +#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0 +#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1 0x0128 0x0398 0x0000 0x3 0x0 +#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN 0x0128 0x0398 0x0000 0x4 0x0 +#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x0128 0x0398 0x0000 0x5 0x0 +#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO 0x0128 0x0398 0x0000 0x6 0x0 +#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x012C 0x039C 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x012C 0x039C 0x06F4 0x0 0x1 +#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x012C 0x039C 0x05D8 0x1 0x0 +#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK 0x012C 0x039C 0x0000 0x2 0x0 +#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2 0x012C 0x039C 0x0000 0x3 0x0 +#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0 +#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0 +#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2 +#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 +#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 +#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 +#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3 +#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 +#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0 0x0134 0x03A4 0x06C8 0x2 0x0 +#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY 0x0134 0x03A4 0x0000 0x3 0x0 +#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT 0x0134 0x03A4 0x0000 0x4 0x0 +#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x0134 0x03A4 0x0000 0x5 0x0 +#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC 0x0134 0x03A4 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0138 0x03A8 0x0704 0x0 0x2 +#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x0138 0x03A8 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC 0x0138 0x03A8 0x072C 0x1 0x0 +#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC 0x0138 0x03A8 0x06CC 0x2 0x0 +#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO 0x0138 0x03A8 0x0528 0x3 0x0 +#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN 0x0138 0x03A8 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4 0x0138 0x03A8 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL 0x0138 0x03A8 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x013C 0x03AC 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x013C 0x03AC 0x0704 0x0 0x3 +#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR 0x013C 0x03AC 0x0000 0x1 0x0 +#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x013C 0x03AC 0x06D0 0x2 0x0 +#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI 0x013C 0x03AC 0x052C 0x3 0x0 +#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0700 0x0 0x2 +#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0 +#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0 +#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK 0x0140 0x03B0 0x0000 0x3 0x0 +#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN 0x0140 0x03B0 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x0140 0x03B0 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_RTS_B__SD3_LCTL 0x0140 0x03B0 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x0144 0x03B4 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS 0x0144 0x03B4 0x0700 0x0 0x3 +#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR 0x0144 0x03B4 0x0000 0x1 0x0 +#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x0144 0x03B4 0x06D4 0x2 0x0 +#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0 0x0144 0x03B4 0x0530 0x3 0x0 +#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT 0x0144 0x03B4 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x0144 0x03B4 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT 0x0144 0x03B4 0x0000 0x6 0x0 +#define MX7D_PAD_I2C1_SCL__I2C1_SCL 0x0148 0x03B8 0x05D4 0x0 0x1 +#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS 0x0148 0x03B8 0x0000 0x1 0x0 +#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS 0x0148 0x03B8 0x0708 0x1 0x0 +#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX 0x0148 0x03B8 0x04DC 0x2 0x1 +#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x0148 0x03B8 0x0548 0x3 0x0 +#define MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x0148 0x03B8 0x0000 0x5 0x0 +#define MX7D_PAD_I2C1_SCL__SD2_VSELECT 0x0148 0x03B8 0x0000 0x6 0x0 +#define MX7D_PAD_I2C1_SDA__I2C1_SDA 0x014C 0x03BC 0x05D8 0x0 0x1 +#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS 0x014C 0x03BC 0x0708 0x1 0x1 +#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS 0x014C 0x03BC 0x0000 0x1 0x0 +#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX 0x014C 0x03BC 0x0000 0x2 0x0 +#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x014C 0x03BC 0x054C 0x3 0x0 +#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1 0x014C 0x03BC 0x0564 0x4 0x1 +#define MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x014C 0x03BC 0x0000 0x5 0x0 +#define MX7D_PAD_I2C1_SDA__SD3_VSELECT 0x014C 0x03BC 0x0000 0x6 0x0 +#define MX7D_PAD_I2C2_SCL__I2C2_SCL 0x0150 0x03C0 0x05DC 0x0 0x1 +#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX 0x0150 0x03C0 0x070C 0x1 0x0 +#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX 0x0150 0x03C0 0x0000 0x1 0x0 +#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B 0x0150 0x03C0 0x0000 0x2 0x0 +#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x0150 0x03C0 0x0544 0x3 0x0 +#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2 0x0150 0x03C0 0x0570 0x4 0x2 +#define MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x0150 0x03C0 0x0000 0x5 0x0 +#define MX7D_PAD_I2C2_SCL__SD3_CD_B 0x0150 0x03C0 0x0738 0x6 0x1 +#define MX7D_PAD_I2C2_SDA__I2C2_SDA 0x0154 0x03C4 0x05E0 0x0 0x1 +#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX 0x0154 0x03C4 0x0000 0x1 0x0 +#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX 0x0154 0x03C4 0x070C 0x1 0x1 +#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB 0x0154 0x03C4 0x0000 0x2 0x0 +#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0 0x0154 0x03C4 0x0550 0x3 0x0 +#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3 0x0154 0x03C4 0x0000 0x4 0x0 +#define MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x0154 0x03C4 0x0000 0x5 0x0 +#define MX7D_PAD_I2C2_SDA__SD3_WP 0x0154 0x03C4 0x073C 0x6 0x1 +#define MX7D_PAD_I2C3_SCL__I2C3_SCL 0x0158 0x03C8 0x05E4 0x0 0x2 +#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS 0x0158 0x03C8 0x0000 0x1 0x0 +#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS 0x0158 0x03C8 0x0710 0x1 0x0 +#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX 0x0158 0x03C8 0x04E0 0x2 0x1 +#define MX7D_PAD_I2C3_SCL__CSI_VSYNC 0x0158 0x03C8 0x0520 0x3 0x1 +#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0 0x0158 0x03C8 0x06D8 0x4 0x1 +#define MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x0158 0x03C8 0x0000 0x5 0x0 +#define MX7D_PAD_I2C3_SCL__EPDC_BDR0 0x0158 0x03C8 0x0000 0x6 0x0 +#define MX7D_PAD_I2C3_SDA__I2C3_SDA 0x015C 0x03CC 0x05E8 0x0 0x2 +#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS 0x015C 0x03CC 0x0710 0x1 0x1 +#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS 0x015C 0x03CC 0x0000 0x1 0x0 +#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX 0x015C 0x03CC 0x0000 0x2 0x0 +#define MX7D_PAD_I2C3_SDA__CSI_HSYNC 0x015C 0x03CC 0x0518 0x3 0x1 +#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1 0x015C 0x03CC 0x06DC 0x4 0x1 +#define MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x015C 0x03CC 0x0000 0x5 0x0 +#define MX7D_PAD_I2C3_SDA__EPDC_BDR1 0x015C 0x03CC 0x0000 0x6 0x0 +#define MX7D_PAD_I2C4_SCL__I2C4_SCL 0x0160 0x03D0 0x05EC 0x0 0x2 +#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x0160 0x03D0 0x0714 0x1 0x0 +#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX 0x0160 0x03D0 0x0000 0x1 0x0 +#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B 0x0160 0x03D0 0x0000 0x2 0x0 +#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK 0x0160 0x03D0 0x051C 0x3 0x1 +#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID 0x0160 0x03D0 0x0734 0x4 0x1 +#define MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x0160 0x03D0 0x0000 0x5 0x0 +#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0 0x0160 0x03D0 0x0000 0x6 0x0 +#define MX7D_PAD_I2C4_SDA__I2C4_SDA 0x0164 0x03D4 0x05F0 0x0 0x2 +#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x0164 0x03D4 0x0000 0x1 0x0 +#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX 0x0164 0x03D4 0x0714 0x1 0x1 +#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB 0x0164 0x03D4 0x0000 0x2 0x0 +#define MX7D_PAD_I2C4_SDA__CSI_MCLK 0x0164 0x03D4 0x0000 0x3 0x0 +#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID 0x0164 0x03D4 0x0730 0x4 0x1 +#define MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x0164 0x03D4 0x0000 0x5 0x0 +#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1 0x0164 0x03D4 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x0168 0x03D8 0x0524 0x0 0x1 +#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x0168 0x03D8 0x071C 0x1 0x2 +#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x0168 0x03D8 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4 0x0168 0x03D8 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2 0x0168 0x03D8 0x04F8 0x3 0x1 +#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x0168 0x03D8 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM 0x0168 0x03D8 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x016C 0x03DC 0x052C 0x0 0x1 +#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x016C 0x03DC 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x016C 0x03DC 0x071C 0x1 0x3 +#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5 0x016C 0x03DC 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3 0x016C 0x03DC 0x04FC 0x3 0x1 +#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x016C 0x03DC 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT 0x016C 0x03DC 0x0580 0x6 0x1 +#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x0170 0x03E0 0x0528 0x0 0x1 +#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x0170 0x03E0 0x0718 0x1 0x2 +#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS 0x0170 0x03E0 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6 0x0170 0x03E0 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4 0x0170 0x03E0 0x0500 0x3 0x1 +#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x0170 0x03E0 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ 0x0170 0x03E0 0x057C 0x6 0x0 +#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0 0x0174 0x03E4 0x0530 0x0 0x1 +#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x0174 0x03E4 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS 0x0174 0x03E4 0x0718 0x1 0x3 +#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7 0x0174 0x03E4 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5 0x0174 0x03E4 0x0504 0x3 0x1 +#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x0174 0x03E4 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3 0x0174 0x03E4 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x0178 0x03E8 0x0534 0x0 0x0 +#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x0178 0x03E8 0x0724 0x1 0x2 +#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x0178 0x03E8 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4 0x0178 0x03E8 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6 0x0178 0x03E8 0x0508 0x3 0x1 +#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13 0x0178 0x03E8 0x066C 0x4 0x2 +#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x0178 0x03E8 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0 0x0178 0x03E8 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x017C 0x03EC 0x053C 0x0 0x0 +#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x017C 0x03EC 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x017C 0x03EC 0x0724 0x1 0x3 +#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5 0x017C 0x03EC 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7 0x017C 0x03EC 0x050C 0x3 0x1 +#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14 0x017C 0x03EC 0x0670 0x4 0x2 +#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x017C 0x03EC 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1 0x017C 0x03EC 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x0180 0x03F0 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2 0x0180 0x03F0 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x0180 0x03F0 0x0538 0x0 0x0 +#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x0180 0x03F0 0x0720 0x1 0x2 +#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x0180 0x03F0 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6 0x0180 0x03F0 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8 0x0180 0x03F0 0x0510 0x3 0x1 +#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15 0x0180 0x03F0 0x0674 0x4 0x2 +#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x0184 0x03F4 0x0540 0x0 0x0 +#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x0184 0x03F4 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x0184 0x03F4 0x0720 0x1 0x3 +#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7 0x0184 0x03F4 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9 0x0184 0x03F4 0x0514 0x3 0x1 +#define MX7D_PAD_ECSPI2_SS0__LCD_RESET 0x0184 0x03F4 0x0000 0x4 0x0 +#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x0184 0x03F4 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE 0x0184 0x03F4 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_CD_B__SD1_CD_B 0x0188 0x03F8 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x0188 0x03F8 0x071C 0x2 0x4 +#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX 0x0188 0x03F8 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO 0x0188 0x03F8 0x0558 0x3 0x1 +#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0 0x0188 0x03F8 0x0584 0x4 0x1 +#define MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x0188 0x03F8 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CD_B__CCM_CLKO1 0x0188 0x03F8 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_WP__SD1_WP 0x018C 0x03FC 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_WP__UART6_DCE_TX 0x018C 0x03FC 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_WP__UART6_DTE_RX 0x018C 0x03FC 0x071C 0x2 0x5 +#define MX7D_PAD_SD1_WP__ECSPI4_MOSI 0x018C 0x03FC 0x055C 0x3 0x1 +#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1 0x018C 0x03FC 0x0588 0x4 0x1 +#define MX7D_PAD_SD1_WP__GPIO5_IO1 0x018C 0x03FC 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_WP__CCM_CLKO2 0x018C 0x03FC 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B 0x0190 0x0400 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK 0x0190 0x0400 0x0000 0x1 0x0 +#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS 0x0190 0x0400 0x0718 0x2 0x4 +#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS 0x0190 0x0400 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK 0x0190 0x0400 0x0554 0x3 0x1 +#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2 0x0190 0x0400 0x058C 0x4 0x1 +#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x0190 0x0400 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CLK__SD1_CLK 0x0194 0x0404 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC 0x0194 0x0404 0x06CC 0x1 0x1 +#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS 0x0194 0x0404 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS 0x0194 0x0404 0x0718 0x2 0x5 +#define MX7D_PAD_SD1_CLK__ECSPI4_SS0 0x0194 0x0404 0x0560 0x3 0x1 +#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3 0x0194 0x0404 0x0590 0x4 0x1 +#define MX7D_PAD_SD1_CLK__GPIO5_IO3 0x0194 0x0404 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CMD__SD1_CMD 0x0198 0x0408 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK 0x0198 0x0408 0x06C4 0x1 0x1 +#define MX7D_PAD_SD1_CMD__ECSPI4_SS1 0x0198 0x0408 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0 0x0198 0x0408 0x05AC 0x4 0x1 +#define MX7D_PAD_SD1_CMD__GPIO5_IO4 0x0198 0x0408 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA0__SD1_DATA0 0x019C 0x040C 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0 0x019C 0x040C 0x06C8 0x1 0x1 +#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX 0x019C 0x040C 0x0724 0x2 0x4 +#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX 0x019C 0x040C 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2 0x019C 0x040C 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1 0x019C 0x040C 0x05B0 0x4 0x1 +#define MX7D_PAD_SD1_DATA0__GPIO5_IO5 0x019C 0x040C 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1 0x019C 0x040C 0x04E4 0x6 0x1 +#define MX7D_PAD_SD1_DATA1__SD1_DATA1 0x01A0 0x0410 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x01A0 0x0410 0x06D0 0x1 0x1 +#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX 0x01A0 0x0410 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX 0x01A0 0x0410 0x0724 0x2 0x5 +#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3 0x01A0 0x0410 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2 0x01A0 0x0410 0x05B4 0x4 0x1 +#define MX7D_PAD_SD1_DATA1__GPIO5_IO6 0x01A0 0x0410 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2 0x01A0 0x0410 0x04E8 0x6 0x1 +#define MX7D_PAD_SD1_DATA2__SD1_DATA2 0x01A4 0x0414 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x01A4 0x0414 0x06D4 0x1 0x1 +#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS 0x01A4 0x0414 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS 0x01A4 0x0414 0x0720 0x2 0x4 +#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY 0x01A4 0x0414 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3 0x01A4 0x0414 0x05B8 0x4 0x1 +#define MX7D_PAD_SD1_DATA2__GPIO5_IO7 0x01A4 0x0414 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3 0x01A4 0x0414 0x04EC 0x6 0x1 +#define MX7D_PAD_SD1_DATA3__SD1_DATA3 0x01A8 0x0418 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x01A8 0x0418 0x0000 0x1 0x0 +#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS 0x01A8 0x0418 0x0720 0x2 0x5 +#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS 0x01A8 0x0418 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1 0x01A8 0x0418 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA 0x01A8 0x0418 0x05A4 0x4 0x1 +#define MX7D_PAD_SD1_DATA3__GPIO5_IO8 0x01A8 0x0418 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4 0x01A8 0x0418 0x04F0 0x6 0x1 +#define MX7D_PAD_SD2_CD_B__SD2_CD_B 0x01AC 0x041C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x01AC 0x041C 0x0568 0x1 0x2 +#define MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x01AC 0x041C 0x0574 0x2 0x2 +#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2 0x01AC 0x041C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB 0x01AC 0x041C 0x05A8 0x4 0x1 +#define MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x01AC 0x041C 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0 0x01AC 0x041C 0x06D8 0x6 0x2 +#define MX7D_PAD_SD2_WP__SD2_WP 0x01B0 0x0420 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_WP__ENET1_MDC 0x01B0 0x0420 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_WP__ENET2_MDC 0x01B0 0x0420 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_WP__ECSPI3_SS3 0x01B0 0x0420 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_WP__USB_OTG1_ID 0x01B0 0x0420 0x0734 0x4 0x2 +#define MX7D_PAD_SD2_WP__GPIO5_IO10 0x01B0 0x0420 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1 0x01B0 0x0420 0x06DC 0x6 0x2 +#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B 0x01B4 0x0424 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK 0x01B4 0x0424 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_RESET_B__SD2_RESET 0x01B4 0x0424 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY 0x01B4 0x0424 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID 0x01B4 0x0424 0x0730 0x4 0x2 +#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x01B4 0x0424 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CLK__SD2_CLK 0x01B8 0x0428 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC 0x01B8 0x0428 0x06B8 0x1 0x0 +#define MX7D_PAD_SD2_CLK__MQS_RIGHT 0x01B8 0x0428 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_CLK__GPT4_CLK 0x01B8 0x0428 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CLK__GPIO5_IO12 0x01B8 0x0428 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CMD__SD2_CMD 0x01BC 0x042C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK 0x01BC 0x042C 0x06B0 0x1 0x0 +#define MX7D_PAD_SD2_CMD__MQS_LEFT 0x01BC 0x042C 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1 0x01BC 0x042C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD 0x01BC 0x042C 0x06EC 0x4 0x1 +#define MX7D_PAD_SD2_CMD__GPIO5_IO13 0x01BC 0x042C 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA0__SD2_DATA0 0x01C0 0x0430 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0 0x01C0 0x0430 0x06B4 0x1 0x0 +#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x01C0 0x0430 0x070C 0x2 0x2 +#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX 0x01C0 0x0430 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2 0x01C0 0x0430 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK 0x01C0 0x0430 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x01C0 0x0430 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA1__SD2_DATA1 0x01C4 0x0434 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK 0x01C4 0x0434 0x06BC 0x1 0x0 +#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x01C4 0x0434 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX 0x01C4 0x0434 0x070C 0x2 0x3 +#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1 0x01C4 0x0434 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B 0x01C4 0x0434 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x01C4 0x0434 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA2__SD2_DATA2 0x01C8 0x0438 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC 0x01C8 0x0438 0x06C0 0x1 0x0 +#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS 0x01C8 0x0438 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS 0x01C8 0x0438 0x0708 0x2 0x2 +#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2 0x01C8 0x0438 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN 0x01C8 0x0438 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x01C8 0x0438 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA3__SD2_DATA3 0x01CC 0x043C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0 0x01CC 0x043C 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS 0x01CC 0x043C 0x0708 0x2 0x3 +#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS 0x01CC 0x043C 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3 0x01CC 0x043C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD 0x01CC 0x043C 0x06E8 0x4 0x1 +#define MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x01CC 0x043C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_CLK__SD3_CLK 0x01D0 0x0440 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_CLK__NAND_CLE 0x01D0 0x0440 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_CLK__ECSPI4_MISO 0x01D0 0x0440 0x0558 0x2 0x2 +#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC 0x01D0 0x0440 0x06CC 0x3 0x2 +#define MX7D_PAD_SD3_CLK__GPT3_CLK 0x01D0 0x0440 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_CLK__GPIO6_IO0 0x01D0 0x0440 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_CMD__SD3_CMD 0x01D4 0x0444 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_CMD__NAND_ALE 0x01D4 0x0444 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI 0x01D4 0x0444 0x055C 0x2 0x2 +#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK 0x01D4 0x0444 0x06C4 0x3 0x2 +#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1 0x01D4 0x0444 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_CMD__GPIO6_IO1 0x01D4 0x0444 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA0__SD3_DATA0 0x01D8 0x0448 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA0__NAND_DATA00 0x01D8 0x0448 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0 0x01D8 0x0448 0x0560 0x2 0x2 +#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0 0x01D8 0x0448 0x06C8 0x3 0x2 +#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2 0x01D8 0x0448 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA0__GPIO6_IO2 0x01D8 0x0448 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA1__SD3_DATA1 0x01DC 0x044C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA1__NAND_DATA01 0x01DC 0x044C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK 0x01DC 0x044C 0x0554 0x2 0x2 +#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK 0x01DC 0x044C 0x06D0 0x3 0x2 +#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1 0x01DC 0x044C 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA1__GPIO6_IO3 0x01DC 0x044C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA2__SD3_DATA2 0x01E0 0x0450 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA2__NAND_DATA02 0x01E0 0x0450 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA2__I2C3_SDA 0x01E0 0x0450 0x05E8 0x2 0x3 +#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC 0x01E0 0x0450 0x06D4 0x3 0x2 +#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2 0x01E0 0x0450 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA2__GPIO6_IO4 0x01E0 0x0450 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA3__SD3_DATA3 0x01E4 0x0454 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA3__NAND_DATA03 0x01E4 0x0454 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA3__I2C3_SCL 0x01E4 0x0454 0x05E4 0x2 0x3 +#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0 0x01E4 0x0454 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3 0x01E4 0x0454 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA3__GPIO6_IO5 0x01E4 0x0454 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA4__SD3_DATA4 0x01E8 0x0458 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA4__NAND_DATA04 0x01E8 0x0458 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x01E8 0x0458 0x0704 0x3 0x4 +#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX 0x01E8 0x0458 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX 0x01E8 0x0458 0x04E0 0x4 0x2 +#define MX7D_PAD_SD3_DATA4__GPIO6_IO6 0x01E8 0x0458 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA5__SD3_DATA5 0x01EC 0x045C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA5__NAND_DATA05 0x01EC 0x045C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x01EC 0x045C 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX 0x01EC 0x045C 0x0704 0x3 0x5 +#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX 0x01EC 0x045C 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA5__GPIO6_IO7 0x01EC 0x045C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA6__SD3_DATA6 0x01F0 0x0460 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA6__NAND_DATA06 0x01F0 0x0460 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA6__SD3_WP 0x01F0 0x0460 0x073C 0x2 0x2 +#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x01F0 0x0460 0x0700 0x3 0x4 +#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS 0x01F0 0x0460 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX 0x01F0 0x0460 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA6__GPIO6_IO8 0x01F0 0x0460 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA7__SD3_DATA7 0x01F4 0x0464 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA7__NAND_DATA07 0x01F4 0x0464 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA7__SD3_CD_B 0x01F4 0x0464 0x0738 0x2 0x2 +#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x01F4 0x0464 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS 0x01F4 0x0464 0x0700 0x3 0x5 +#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX 0x01F4 0x0464 0x04DC 0x4 0x2 +#define MX7D_PAD_SD3_DATA7__GPIO6_IO9 0x01F4 0x0464 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_STROBE__SD3_STROBE 0x01F8 0x0468 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_STROBE__NAND_RE_B 0x01F8 0x0468 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x01F8 0x0468 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x01FC 0x046C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x01FC 0x046C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_RESET_B__SD3_RESET 0x01FC 0x046C 0x0000 0x2 0x0 +#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK 0x01FC 0x046C 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x01FC 0x046C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x0200 0x0470 0x06A0 0x0 0x0 +#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x0200 0x0470 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x0200 0x0470 0x0714 0x2 0x2 +#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX 0x0200 0x0470 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x0200 0x0470 0x04DC 0x3 0x3 +#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD 0x0200 0x0470 0x06E4 0x4 0x1 +#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x0200 0x0470 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET 0x0200 0x0470 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x0204 0x0474 0x06A8 0x0 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x0204 0x0474 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x0204 0x0474 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX 0x0204 0x0474 0x0714 0x2 0x3 +#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x0204 0x0474 0x0000 0x3 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK 0x0204 0x0474 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x0204 0x0474 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET 0x0204 0x0474 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x0208 0x0478 0x06AC 0x0 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS 0x0208 0x0478 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x0208 0x0478 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS 0x0208 0x0478 0x0710 0x2 0x2 +#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x0208 0x0478 0x04E0 0x3 0x3 +#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B 0x0208 0x0478 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x0208 0x0478 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT 0x0208 0x0478 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x020C 0x047C 0x0000 0x0 0x0 +#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x020C 0x047C 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x020C 0x047C 0x0710 0x2 0x3 +#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS 0x020C 0x047C 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x020C 0x047C 0x0000 0x3 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN 0x020C 0x047C 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x020C 0x047C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET 0x020C 0x047C 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC 0x0210 0x0480 0x06A4 0x0 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B 0x0210 0x0480 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x0210 0x0480 0x06B8 0x2 0x1 +#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x0210 0x0480 0x05EC 0x3 0x3 +#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD 0x0210 0x0480 0x06E0 0x4 0x1 +#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x0210 0x0480 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT 0x0210 0x0480 0x0000 0x6 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0 0x0210 0x0480 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x0214 0x0484 0x069C 0x0 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B 0x0214 0x0484 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK 0x0214 0x0484 0x06B0 0x2 0x1 +#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x0214 0x0484 0x05F0 0x3 0x3 +#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA 0x0214 0x0484 0x05CC 0x4 0x1 +#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x0214 0x0484 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT 0x0214 0x0484 0x0000 0x6 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1 0x0214 0x0484 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x0218 0x0488 0x0000 0x0 0x0 +#define MX7D_PAD_SAI1_MCLK__NAND_WP_B 0x0218 0x0488 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK 0x0218 0x0488 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY 0x0218 0x0488 0x04F4 0x3 0x3 +#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB 0x0218 0x0488 0x05D0 0x4 0x1 +#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18 0x0218 0x0488 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK 0x0218 0x0488 0x0000 0x7 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x021C 0x048C 0x06C0 0x0 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x021C 0x048C 0x0548 0x1 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x021C 0x048C 0x070C 0x2 0x4 +#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX 0x021C 0x048C 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS 0x021C 0x048C 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x021C 0x048C 0x06F0 0x3 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4 0x021C 0x048C 0x05BC 0x4 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x021C 0x048C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x0220 0x0490 0x06BC 0x0 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x0220 0x0490 0x054C 0x1 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x0220 0x0490 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX 0x0220 0x0490 0x070C 0x2 0x5 +#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS 0x0220 0x0490 0x06F0 0x3 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x0220 0x0490 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5 0x0220 0x0490 0x05C0 0x4 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x0220 0x0490 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x0224 0x0494 0x06B4 0x0 0x1 +#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x0224 0x0494 0x0544 0x1 0x1 +#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x0224 0x0494 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS 0x0224 0x0494 0x0708 0x2 0x4 +#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS 0x0224 0x0494 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x0224 0x0494 0x06F8 0x3 0x2 +#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6 0x0224 0x0494 0x05C4 0x4 0x1 +#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x0224 0x0494 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7 0x0224 0x0494 0x0610 0x6 0x1 +#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x0228 0x0498 0x0000 0x0 0x0 +#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0 0x0228 0x0498 0x0550 0x1 0x1 +#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x0228 0x0498 0x0708 0x2 0x5 +#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS 0x0228 0x0498 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS 0x0228 0x0498 0x06F8 0x3 0x3 +#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x0228 0x0498 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7 0x0228 0x0498 0x05C8 0x4 0x1 +#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x0228 0x0498 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7 0x0228 0x0498 0x0630 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x022C 0x049C 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT 0x022C 0x049C 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x022C 0x049C 0x05E4 0x2 0x4 +#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS 0x022C 0x049C 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS 0x022C 0x049C 0x06F0 0x3 0x2 +#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0 0x022C 0x049C 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x022C 0x049C 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3 0x022C 0x049C 0x0620 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x0230 0x04A0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT 0x0230 0x04A0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x0230 0x04A0 0x05E8 0x2 0x4 +#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS 0x0230 0x04A0 0x06F0 0x3 0x3 +#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS 0x0230 0x04A0 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1 0x0230 0x04A0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0230 0x04A0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3 0x0230 0x04A0 0x0600 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x0234 0x04A4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x0234 0x04A4 0x04DC 0x1 0x4 +#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK 0x0234 0x04A4 0x0534 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX 0x0234 0x04A4 0x06F4 0x3 0x2 +#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX 0x0234 0x04A4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4 0x0234 0x04A4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x0234 0x04A4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2 0x0234 0x04A4 0x061C 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x0238 0x04A8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x0238 0x04A8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI 0x0238 0x04A8 0x053C 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX 0x0238 0x04A8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX 0x0238 0x04A8 0x06F4 0x3 0x3 +#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5 0x0238 0x04A8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x0238 0x04A8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2 0x0238 0x04A8 0x05FC 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x023C 0x04AC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1 0x023C 0x04AC 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6 0x023C 0x04AC 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x023C 0x04AC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1 0x023C 0x04AC 0x0618 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x0240 0x04B0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x0240 0x04B0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2 0x0240 0x04B0 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7 0x0240 0x04B0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0240 0x04B0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1 0x0240 0x04B0 0x0000 0x6 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x0244 0x04B4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT 0x0244 0x04B4 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3 0x0244 0x04B4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8 0x0244 0x04B4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0244 0x04B4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0 0x0244 0x04B4 0x0614 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x0248 0x04B8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT 0x0248 0x04B8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY 0x0248 0x04B8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9 0x0248 0x04B8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0248 0x04B8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0 0x0248 0x04B8 0x05F4 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x024C 0x04BC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX 0x024C 0x04BC 0x04E0 0x1 0x4 +#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO 0x024C 0x04BC 0x0538 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x024C 0x04BC 0x05EC 0x3 0x4 +#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED 0x024C 0x04BC 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x024C 0x04BC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x0250 0x04C0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX 0x0250 0x04C0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0 0x0250 0x04C0 0x0540 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x0250 0x04C0 0x05F0 0x3 0x4 +#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ 0x0250 0x04C0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x025C 0x04CC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1 0x025C 0x04CC 0x0564 0x1 0x2 +#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x025C 0x04CC 0x06A0 0x2 0x1 +#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3 0x025C 0x04CC 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ 0x025C 0x04CC 0x057C 0x4 0x1 +#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x025C 0x04CC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1 0x025C 0x04CC 0x04E4 0x6 0x2 +#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0 0x025C 0x04CC 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x0260 0x04D0 0x056C 0x0 0x0 +#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B 0x0260 0x04D0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x0260 0x04D0 0x06A8 0x2 0x1 +#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK 0x0260 0x04D0 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE 0x0260 0x04D0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x0260 0x04D0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2 0x0260 0x04D0 0x04E8 0x6 0x2 +#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1 0x0260 0x04D0 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_CRS__ENET1_CRS 0x0264 0x04D4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB 0x0264 0x04D4 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x0264 0x04D4 0x06AC 0x2 0x1 +#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1 0x0264 0x04D4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0 0x0264 0x04D4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0264 0x04D4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3 0x0264 0x04D4 0x04EC 0x6 0x2 +#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2 0x0264 0x04D4 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_COL__ENET1_COL 0x0268 0x04D8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x0268 0x04D8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x0268 0x04D8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2 0x0268 0x04D8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1 0x0268 0x04D8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_COL__GPIO7_IO15 0x0268 0x04D8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4 0x0268 0x04D8 0x04F0 0x6 0x2 +#define MX7D_PAD_ENET1_COL__CSU_INT_DEB 0x0268 0x04D8 0x0000 0x7 0x0 + +#endif /* __DTS_IMX7D_PINFUNC_H */ -- cgit v0.10.2 From e60f74907d65fb79f41c0f797407cb21da922c47 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:06 -0700 Subject: arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree Add base device for NXP i.MX 7Solo/7Dual. The two SoC are very similar and hence can share the same device tree for boot loaders purpose. Signed-off-by: Stefan Agner Reviewed-by: Simon Glass diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index efdd1ff..532527d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -283,6 +283,8 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \ dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb +dtb-$(CONFIG_MX7) += imx7-colibri.dtb + dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb \ diff --git a/arch/arm/dts/imx7-colibri.dts b/arch/arm/dts/imx7-colibri.dts new file mode 100644 index 0000000..f2da096 --- /dev/null +++ b/arch/arm/dts/imx7-colibri.dts @@ -0,0 +1,92 @@ +/* + * Copyright 2016 Toradex AG + * + * SPDX-License-Identifier: GPL-2.0+ or X11 + */ + +/dts-v1/; +#include +#include "imx7.dtsi" + +/ { + model = "Toradex Colibri iMX7S/D"; + compatible = "toradex,imx7-colibri", "fsl,imx7"; + + chosen { + stdout-path = &uart1; + }; +}; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + sda-gpios = <&gpio7 9 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; + uart-has-rtscts; + fsl,dte-mode; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c4: i2c4-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f + MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpio-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x4000007f + MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x4000007f + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 + MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 + MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 + >; + }; + + pinctrl_uart1_ctrl1: uart1-ctrl1-grp { + fsl,pins = < + MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */ + MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */ + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f + MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x4000007f + MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x4000007f + >; + }; +}; diff --git a/arch/arm/dts/imx7.dtsi b/arch/arm/dts/imx7.dtsi new file mode 100644 index 0000000..755cc46 --- /dev/null +++ b/arch/arm/dts/imx7.dtsi @@ -0,0 +1,194 @@ +/* + * Copyright 2016 Toradex AG + * + * SPDX-License-Identifier: GPL-2.0+ or X11 + */ +#include "imx7d-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + aips1: aips-bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x400000>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio6: gpio@30250000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30250000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio7: gpio@30260000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30260000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + + iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + }; + }; + + aips3: aips-bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x400000>; + ranges; + + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + status = "disabled"; + }; + + uart5: serial@30a70000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a70000 0x10000>; + status = "disabled"; + }; + + uart6: serial@30a80000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a80000 0x10000>; + status = "disabled"; + }; + + uart7: serial@30a90000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a90000 0x10000>; + status = "disabled"; + }; + }; + }; +}; -- cgit v0.10.2 From 7443a1ddb19c047e5331962545ef5cbc34b5f60a Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:07 -0700 Subject: colibri_imx7: remove legancy I2C support Remove legancy I2C config and code in favor of upcomming DM/DT enable I2C support. Signed-off-by: Stefan Agner diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c index 8eedd65..ddb3085 100644 --- a/board/toradex/colibri_imx7/colibri_imx7.c +++ b/board/toradex/colibri_imx7/colibri_imx7.c @@ -12,13 +12,11 @@ #include #include #include -#include #include #include #include #include #include -#include #include #include #include @@ -38,9 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; #define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) -#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ - PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) - #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ PAD_CTL_DSE_3P3V_49OHM) @@ -48,36 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM) -#ifdef CONFIG_SYS_I2C_MXC -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C1 for PMIC */ -static struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX7D_PAD_GPIO1_IO04__I2C1_SCL | PC, - .gpio_mode = MX7D_PAD_GPIO1_IO04__GPIO1_IO4 | PC, - .gp = IMX_GPIO_NR(1, 4), - }, - .sda = { - .i2c_mode = MX7D_PAD_GPIO1_IO05__I2C1_SDA | PC, - .gpio_mode = MX7D_PAD_GPIO1_IO05__GPIO1_IO5 | PC, - .gp = IMX_GPIO_NR(1, 5), - }, -}; -/* I2C4 for Colibri I2C */ -static struct i2c_pads_info i2c_pad_info4 = { - .scl = { - .i2c_mode = MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL | PC, - .gpio_mode = MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 | PC, - .gp = IMX_GPIO_NR(7, 8), - }, - .sda = { - .i2c_mode = MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA | PC, - .gpio_mode = MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 | PC, - .gp = IMX_GPIO_NR(7, 9), - }, -}; -#endif - int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -331,11 +296,6 @@ int board_early_init_f(void) { setup_iomux_uart(); -#ifdef CONFIG_SYS_I2C_MXC - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); -#endif - return 0; } diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 16ae952..55d8fcf 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -59,9 +59,7 @@ #undef CONFIG_BOOTM_RTEMS /* I2C configs */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_IPADDR 192.168.10.2 -- cgit v0.10.2 From aa723b8dbfbd61f12d400650f34d47ac1db04820 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:08 -0700 Subject: colibri_imx7: remove legancy UART platform data We now use device tree to provide SoC data to the UART driver, there is no need for the legancy UART platform data. Signed-off-by: Stefan Agner diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c index ddb3085..bd7d5bc 100644 --- a/board/toradex/colibri_imx7/colibri_imx7.c +++ b/board/toradex/colibri_imx7/colibri_imx7.c @@ -368,13 +368,3 @@ int board_ehci_hcd_init(int port) return 0; } #endif - -static struct mxc_serial_platdata mxc_serial_plat = { - .reg = (struct mxc_uart *)UART1_IPS_BASE_ADDR, - .use_dte = true, -}; - -U_BOOT_DEVICE(mxc_serial) = { - .name = "serial_mxc", - .platdata = &mxc_serial_plat, -}; -- cgit v0.10.2 From c571d6828d980e555ba40baf85aab45b39e118ee Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:09 -0700 Subject: power: pmic: add Ricoh RN5T567 PMIC support Add device model enabled PMIC driver for Ricoh RN5T567 PMIC used on Colibri iMX7. Signed-off-by: Stefan Agner Reviewed-by: Simon Glass diff --git a/doc/device-tree-bindings/pmic/rn5t567.txt b/doc/device-tree-bindings/pmic/rn5t567.txt new file mode 100644 index 0000000..e9e6885 --- /dev/null +++ b/doc/device-tree-bindings/pmic/rn5t567.txt @@ -0,0 +1,17 @@ +Ricoh RN5T567 PMIC + +This file describes the binding info for the PMIC driver. + +Required properties: +- compatible: "ricoh,rn5t567" +- reg: depending on strapping, e.g. 0x33 + +With those two properties, the PMIC device can be used to read/write +registers. + +Example: + +rn5t567@33 { + compatible = "ricoh,rn5t567"; + reg = <0x33>; +}; diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 69f8d51..13d293a 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -127,6 +127,14 @@ config PMIC_S5M8767 driver provides basic register access and sets up the attached regulators if regulator support is enabled. +config PMIC_RN5T567 + bool "Enable driver for Ricoh RN5T567 PMIC" + depends on DM_PMIC + ---help--- + The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO + regulators Real-Time Clock and 4 GPIOs. This driver provides + register access only. + config PMIC_TPS65090 bool "Enable driver for Texas Instruments TPS65090 PMIC" depends on DM_PMIC diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 52b4f71..37d9eb5 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o obj-$(CONFIG_PMIC_ACT8846) += act8846.o obj-$(CONFIG_PMIC_PM8916) += pm8916.o obj-$(CONFIG_PMIC_RK808) += rk808.o +obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o obj-$(CONFIG_PMIC_TPS65090) += tps65090.o obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o diff --git a/drivers/power/pmic/rn5t567.c b/drivers/power/pmic/rn5t567.c new file mode 100644 index 0000000..001e695 --- /dev/null +++ b/drivers/power/pmic/rn5t567.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2016 Toradex AG + * Stefan Agner + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +static int rn5t567_reg_count(struct udevice *dev) +{ + return RN5T567_NUM_OF_REGS; +} + +static int rn5t567_write(struct udevice *dev, uint reg, const uint8_t *buff, + int len) +{ + int ret; + + ret = dm_i2c_write(dev, reg, buff, len); + if (ret) { + debug("write error to device: %p register: %#x!", dev, reg); + return ret; + } + + return 0; +} + +static int rn5t567_read(struct udevice *dev, uint reg, uint8_t *buff, int len) +{ + int ret; + + ret = dm_i2c_read(dev, reg, buff, len); + if (ret) { + debug("read error from device: %p register: %#x!", dev, reg); + return ret; + } + + return 0; +} + +static struct dm_pmic_ops rn5t567_ops = { + .reg_count = rn5t567_reg_count, + .read = rn5t567_read, + .write = rn5t567_write, +}; + +static const struct udevice_id rn5t567_ids[] = { + { .compatible = "ricoh,rn5t567" }, + { } +}; + +U_BOOT_DRIVER(pmic_rn5t567) = { + .name = "rn5t567 pmic", + .id = UCLASS_PMIC, + .of_match = rn5t567_ids, + .ops = &rn5t567_ops, +}; diff --git a/include/power/rn5t567_pmic.h b/include/power/rn5t567_pmic.h new file mode 100644 index 0000000..9ce601f --- /dev/null +++ b/include/power/rn5t567_pmic.h @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2016 Toradex AG + * Stefan Agner + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __RN5T567_PMIC_H_ +#define __RN5T567_PMIC_H_ + +/* RN5T567 registers */ +enum { + RN5T567_LSIVER = 0x00, + RN5T567_OTPVER = 0x01, + RN5T567_IODAC = 0x02, + RN5T567_VINDAC = 0x03, + RN5T567_OUT32KEN = 0x05, + + RN5T567_CPUCNT = 0x06, + + RN5T567_PSWR = 0x07, + RN5T567_PONHIS = 0x09, + RN5T567_POFFHIS = 0x0A, + RN5T567_WATCHDOG = 0x0B, + RN5T567_WATCHDOGCNT = 0x0C, + RN5T567_PWRFUNC = 0x0D, + RN5T567_SLPCNT = 0x0E, + RN5T567_REPCNT = 0x0F, + RN5T567_PWRONTIMSET = 0x10, + RN5T567_NOETIMSETCNT = 0x11, + RN5T567_PWRIREN = 0x12, + RN5T567_PWRIRQ = 0x13, + RN5T567_PWRMON = 0x14, + RN5T567_PWRIRSEL = 0x15, + + RN5T567_DC1_SLOT = 0x16, + RN5T567_DC2_SLOT = 0x17, + RN5T567_DC3_SLOT = 0x18, + RN5T567_DC4_SLOT = 0x19, + + RN5T567_LDO1_SLOT = 0x1B, + RN5T567_LDO2_SLOT = 0x1C, + RN5T567_LDO3_SLOT = 0x1D, + RN5T567_LDO4_SLOT = 0x1E, + RN5T567_LDO5_SLOT = 0x1F, + + RN5T567_PSO0_SLOT = 0x25, + RN5T567_PSO1_SLOT = 0x26, + RN5T567_PSO2_SLOT = 0x27, + RN5T567_PSO3_SLOT = 0x28, + + RN5T567_LDORTC1_SLOT = 0x2A, + + RN5T567_DC1CTL = 0x2C, + RN5T567_DC1CTL2 = 0x2D, + RN5T567_DC2CTL = 0x2E, + RN5T567_DC2CTL2 = 0x2F, + RN5T567_DC3CTL = 0x30, + RN5T567_DC3CTL2 = 0x31, + RN5T567_DC4CTL = 0x32, + RN5T567_DC4CTL2 = 0x33, + + RN5T567_DC1DAC = 0x36, + RN5T567_DC2DAC = 0x37, + RN5T567_DC3DAC = 0x38, + RN5T567_DC4DAC = 0x39, + + RN5T567_DC1DAC_SLP = 0x3B, + RN5T567_DC2DAC_SLP = 0x3C, + RN5T567_DC3DAC_SLP = 0x3D, + RN5T567_DC4DAC_SLP = 0x3E, + + RN5T567_DCIREN = 0x40, + RN5T567_DCIRQ = 0x41, + RN5T567_DCIRMON = 0x42, + + RN5T567_LDOEN1 = 0x44, + RN5T567_LDOEN2 = 0x45, + RN5T567_LDODIS1 = 0x46, + + RN5T567_LDO1DAC = 0x4C, + RN5T567_LDO2DAC = 0x4D, + RN5T567_LDO3DAC = 0x4E, + RN5T567_LDO4DAC = 0x4F, + RN5T567_LDO5DAC = 0x50, + + RN5T567_LDORTC1DAC = 0x56, + RN5T567_LDORTC2DAC = 0x57, + + RN5T567_LDO1DAC_SLP = 0x58, + RN5T567_LDO2DAC_SLP = 0x59, + RN5T567_LDO3DAC_SLP = 0x5A, + RN5T567_LDO4DAC_SLP = 0x5B, + RN5T567_LDO5DAC_SLP = 0x5C, + + RN5T567_IOSEL = 0x90, + RN5T567_IOOUT = 0x91, + RN5T567_GPEDGE1 = 0x92, + RN5T567_EN_GPIR = 0x94, + RN5T567_IR_GPR = 0x95, + RN5T567_IR_GPF = 0x96, + RN5T567_MON_IOIN = 0x97, + RN5T567_GPLED_FUNC = 0x98, + RN5T567_INTPOL = 0x9C, + RN5T567_INTEN = 0x9D, + RN5T567_INTMON = 0x9E, + + RN5T567_PREVINDAC = 0xB0, + RN5T567_OVTEMP = 0xBC, + + RN5T567_NUM_OF_REGS = 0xBF, +}; + +#endif -- cgit v0.10.2 From cced7e5bb57311e894f06eb7c04ba62833e66939 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:10 -0700 Subject: arm: dts: imx7: add Ricoh RN5T567 PMIC node Add device tree node for Ricoh RN5T567. Currently we do not need the individual DC/DC converters or LDO's (and they are also not yet supported by the driver). Signed-off-by: Stefan Agner diff --git a/arch/arm/dts/imx7-colibri.dts b/arch/arm/dts/imx7-colibri.dts index f2da096..cbef5d5 100644 --- a/arch/arm/dts/imx7-colibri.dts +++ b/arch/arm/dts/imx7-colibri.dts @@ -24,6 +24,11 @@ sda-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; scl-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; + + rn5t567@33 { + compatible = "ricoh,rn5t567"; + reg = <0x33>; + }; }; &i2c4 { -- cgit v0.10.2 From 02ad90eca5d156914ec7aeadf1bac6160dc05f41 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:11 -0700 Subject: colibri_imx7: use Ricoh RN5T567 to reboot the board Use the external PMIC Ricoh RN5T567 to reliably restart the system. Signed-off-by: Stefan Agner diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c index bd7d5bc..c64e31e 100644 --- a/board/toradex/colibri_imx7/colibri_imx7.c +++ b/board/toradex/colibri_imx7/colibri_imx7.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -337,6 +339,46 @@ int board_late_init(void) return 0; } +#ifdef CONFIG_DM_PMIC +int power_init_board(void) +{ + struct udevice *dev; + int reg, ver; + int ret; + + + ret = pmic_get("rn5t567", &dev); + if (ret) + return ret; + ver = pmic_reg_read(dev, RN5T567_LSIVER); + reg = pmic_reg_read(dev, RN5T567_OTPVER); + + printf("PMIC: RN5T567 LSIVER=0x%02x OTPVER=0x%02x\n", ver, reg); + + /* set judge and press timer of N_OE to minimal values */ + pmic_clrsetbits(dev, RN5T567_NOETIMSETCNT, 0x7, 0); + + return 0; +} + +void reset_cpu(ulong addr) +{ + struct udevice *dev; + + pmic_get("rn5t567", &dev); + + /* Use PMIC to reset, set REPWRTIM to 0 and REPWRON to 1 */ + pmic_reg_write(dev, RN5T567_REPCNT, 0x1); + pmic_reg_write(dev, RN5T567_SLPCNT, 0x1); + + /* + * Re-power factor detection on PMIC side is not instant. 1ms + * proved to be enough time until reset takes effect. + */ + mdelay(1); +} +#endif + int checkboard(void) { printf("Model: Toradex Colibri iMX7%c\n", -- cgit v0.10.2 From d429557c64a911f076b3fa87761ca94121105f5a Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:12 -0700 Subject: configs: enable device tree for Colibri iMX7 Enable device tree configuration and specify default device tree for Toradex Colibri iMX7. Signed-off-by: Stefan Agner diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index 7c4d349..7a49f74 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_MX7=y CONFIG_TARGET_COLIBRI_IMX7=y CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y +CONFIG_DEFAULT_DEVICE_TREE="imx7-colibri" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D" CONFIG_BOOTDELAY=1 CONFIG_HUSH_PARSER=y @@ -30,8 +31,16 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y CONFIG_DFU_MMC=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y CONFIG_MTD_UBI_FASTMAP=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX7=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RN5T567=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y @@ -41,4 +50,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Toradex" CONFIG_G_DNL_VENDOR_NUM=0x1b67 CONFIG_G_DNL_PRODUCT_NUM=0x4020 -CONFIG_OF_LIBFDT=y -- cgit v0.10.2 From d7255e8ddbfe76d7b0d18247d35742596c85ad93 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 28 Sep 2016 11:29:28 +0200 Subject: ARM: vf610: use strcpy for soc environment variable To create the soc environment variable we concatenate two strings on the stack. So far, strcat has been used for the first string as well as for the second string. Since the variable on the stack is not initialized, the first strcat may not start using the first entry in the character array. This then could lead to an buffer overflow on the stack. Signed-off-by: Stefan Agner Acked-by: Marcel Ziswiler diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c index 08b9ef4..50eb0c6 100644 --- a/arch/arm/cpu/armv7/vf610/generic.c +++ b/arch/arm/cpu/armv7/vf610/generic.c @@ -322,7 +322,7 @@ int arch_misc_init(void) { char soc[6]; - strcat(soc, "vf"); + strcpy(soc, "vf"); strcat(soc, soc_type); setenv("soc", soc); -- cgit v0.10.2 From 3dddc793e0114eb7dfc68b98a4316644d4031fcb Mon Sep 17 00:00:00 2001 From: Ken Lin Date: Fri, 7 Oct 2016 10:26:56 -0400 Subject: board: ge: bx50v3: Pass video bootargs for b850v3 Due to clock source restrictions on i.MX6, certain pixel clock rates can not be supported. Hence default the resolution/frame rate during boot to a supported value by passing video bootargs 1024x768@60 for HDMI (Display Port1) and LVDS (Display Port2) on B850v3. Signed-off-by: Ken Lin Signed-off-by: Akshay Bhat diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 52f096e..c77fef6 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -15,6 +15,7 @@ #include #include +#define BX50V3_BOOTARGS_EXTRA #if defined(CONFIG_TARGET_GE_B450V3) #define CONFIG_BOARD_NAME "General Electric B450v3" #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb" @@ -24,6 +25,9 @@ #elif defined(CONFIG_TARGET_GE_B850V3) #define CONFIG_BOARD_NAME "General Electric B850v3" #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb" +#undef BX50V3_BOOTARGS_EXTRA +#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \ + "video=HDMI-A-1:1024x768@60 " #else #define CONFIG_BOARD_NAME "General Electric BA16 Generic" #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb" @@ -166,7 +170,8 @@ "echo 'U-Boot upgraded. Please reset'; " \ "fi\0" \ "setargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/${rootdev} rw rootwait cma=128M\0" \ + "root=/dev/${rootdev} rw rootwait cma=128M " \ + BX50V3_BOOTARGS_EXTRA "\0" \ "loadbootscript=" \ "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ -- cgit v0.10.2