From 6c0a032a3280daf96924b689f47e62bd09472260 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Enric=20Balletb=C3=B2=20i=20Serra?= Date: Fri, 6 Dec 2013 21:30:18 +0100 Subject: ARM: OMAP4: Rename to ti_omap4_common.h Follow the pattern ti__common.h used by other TI processors to be coherent. So just rename omap4_common.h to ti_omap4_common.h. Signed-off-by: Enric Balletbo i Serra Reviewed-by: Lokesh Vutla diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h deleted file mode 100644 index d099bfd..0000000 --- a/include/configs/omap4_common.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated. - * Aneesh V - * Steve Sakoman - * - * TI OMAP4 common configuration settings - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_OMAP4_COMMON_H -#define __CONFIG_OMAP4_COMMON_H - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP44XX 1 /* which is a 44XX */ -#define CONFIG_OMAP4430 1 /* which is in a 4430 */ -#define CONFIG_MISC_INIT_R -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_SYS_THUMB_BUILD - -#ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_L2_PL310 1 -#define CONFIG_SYS_PL310_BASE 0x48242000 -#endif -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* Get CPU defs */ -#include -#include - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE - -/* - * Total Size Environment - 128k - */ -#define CONFIG_ENV_SIZE (128 << 10) - -/* - * For the DDR timing information we can either dynamically determine - * the timings to use or use pre-determined timings (based on using the - * dynamic method. Default to the static timing infomation. - */ -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -#include - -/* - * Hardware drivers - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 48000000 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 UART3_BASE - -/* TWL6030 */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_TWL6030_POWER 1 -#endif - -/* USB */ -#define CONFIG_MUSB_UDC 1 -#define CONFIG_USB_OMAP3 1 - -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -/* Per-Soc commands */ -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - -/* - * Environment setup - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "fdt_high=0xffffffff\0" \ - "fdtaddr=0x80f80000\0" \ - "fdtfile=undefined\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "findfdt="\ - "if test $board_name = sdp4430; then " \ - "setenv fdtfile omap4-sdp.dtb; fi; " \ - "if test $board_name = panda; then " \ - "setenv fdtfile omap4-panda.dtb; fi;" \ - "if test $board_name = panda-a4; then " \ - "setenv fdtfile omap4-panda-a4.dtb; fi;" \ - "if test $board_name = panda-es; then " \ - "setenv fdtfile omap4-panda-es.dtb; fi;" \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadbootenv; then " \ - "run importbootenv; " \ - "fi;" \ - "if test -n ${uenvcmd}; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "fi;" \ - "if run loadimage; then " \ - "run loadfdt;" \ - "run mmcboot; " \ - "fi; " \ - "fi" - -/* - * Defines for SPL - * It is known that this will break HS devices. Since the current size of - * SPL is overlapped with public stack and breaking non HS devices to boot. - * So moving TEXT_BASE down to non-HS limit. - */ -#define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_DISPLAY_PRINT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - -#endif /* __CONFIG_OMAP4_COMMON_H */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 73dc088..7378acd 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -4,7 +4,7 @@ * Steve Sakoman * * Configuration settings for the TI OMAP4 Panda board. - * See omap4_common.h for OMAP4 common part + * See ti_omap4_common.h for OMAP4 common part * * SPDX-License-Identifier: GPL-2.0+ */ @@ -36,7 +36,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#include +#include #define CONFIG_CMD_NET /* GPIO */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index b352511..a837974 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -5,7 +5,7 @@ * Steve Sakoman * * Configuration settings for the TI SDP4430 board. - * See omap4_common.h for OMAP4 common part + * See ti_omap4_common.h for OMAP4 common part * * SPDX-License-Identifier: GPL-2.0+ */ @@ -19,7 +19,7 @@ #define CONFIG_4430SDP 1 /* working with SDP */ #define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP -#include +#include /* Battery Charger */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h new file mode 100644 index 0000000..b625c49 --- /dev/null +++ b/include/configs/ti_omap4_common.h @@ -0,0 +1,162 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated. + * Aneesh V + * Steve Sakoman + * + * TI OMAP4 common configuration settings + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_TI_OMAP4_COMMON_H +#define __CONFIG_TI_OMAP4_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_OMAP44XX 1 /* which is a 44XX */ +#define CONFIG_OMAP4430 1 /* which is in a 4430 */ +#define CONFIG_MISC_INIT_R +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +#define CONFIG_SYS_THUMB_BUILD + +#ifndef CONFIG_SYS_L2CACHE_OFF +#define CONFIG_SYS_L2_PL310 1 +#define CONFIG_SYS_PL310_BASE 0x48242000 +#endif +#define CONFIG_SYS_CACHELINE_SIZE 32 + +/* Get CPU defs */ +#include +#include + +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE + +/* + * Total Size Environment - 128k + */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* + * For the DDR timing information we can either dynamically determine + * the timings to use or use pre-determined timings (based on using the + * dynamic method. Default to the static timing infomation. + */ +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +#include + +/* + * Hardware drivers + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE + +/* TWL6030 */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_TWL6030_POWER 1 +#endif + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +/* Per-Soc commands */ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +/* + * Environment setup + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyO2,115200n8\0" \ + "fdt_high=0xffffffff\0" \ + "fdtaddr=0x80f80000\0" \ + "fdtfile=undefined\0" \ + "bootpart=0:2\0" \ + "bootdir=/boot\0" \ + "bootfile=zImage\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "vram=${vram} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ + "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "mmcboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ + "findfdt="\ + "if test $board_name = sdp4430; then " \ + "setenv fdtfile omap4-sdp.dtb; fi; " \ + "if test $board_name = panda; then " \ + "setenv fdtfile omap4-panda.dtb; fi;" \ + "if test $board_name = panda-a4; then " \ + "setenv fdtfile omap4-panda-a4.dtb; fi;" \ + "if test $board_name = panda-es; then " \ + "setenv fdtfile omap4-panda-es.dtb; fi;" \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" \ + "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadbootenv; then " \ + "run importbootenv; " \ + "fi;" \ + "if test -n ${uenvcmd}; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "fi;" \ + "if run loadimage; then " \ + "run loadfdt;" \ + "run mmcboot; " \ + "fi; " \ + "fi" + +/* + * Defines for SPL + * It is known that this will break HS devices. Since the current size of + * SPL is overlapped with public stack and breaking non HS devices to boot. + * So moving TEXT_BASE down to non-HS limit. + */ +#define CONFIG_SPL_TEXT_BASE 0x40300000 +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_DISPLAY_PRINT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +#endif /* __CONFIG_TI_OMAP4_COMMON_H */ -- cgit v0.10.2