1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
|
/*
* Qualcomm UART driver
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*
* UART will work in Data Mover mode.
* Based on Linux driver.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <errno.h>
#include <serial.h>
#include <watchdog.h>
#include <asm/io.h>
#include <linux/compiler.h>
/* Serial registers - this driver works in uartdm mode*/
#define UARTDM_DMRX 0x34 /* Max RX transfer length */
#define UARTDM_NCF_TX 0x40 /* Number of chars to TX */
#define UARTDM_RXFS 0x50 /* RX channel status register */
#define UARTDM_RXFS_BUF_SHIFT 0x7 /* Number of bytes in the packing buffer */
#define UARTDM_RXFS_BUF_MASK 0x7
#define UARTDM_SR 0xA4 /* Status register */
#define UARTDM_SR_RX_READY (1 << 0) /* Word is the receiver FIFO */
#define UARTDM_SR_TX_EMPTY (1 << 3) /* Transmitter underrun */
#define UARTDM_SR_UART_OVERRUN (1 << 4) /* Receive overrun */
#define UARTDM_CR 0xA8 /* Command register */
#define UARTDM_CR_CMD_RESET_ERR (3 << 4) /* Clear overrun error */
#define UARTDM_CR_CMD_RESET_STALE_INT (8 << 4) /* Clears stale irq */
#define UARTDM_CR_CMD_RESET_TX_READY (3 << 8) /* Clears TX Ready irq*/
#define UARTDM_CR_CMD_FORCE_STALE (4 << 8) /* Causes stale event */
#define UARTDM_CR_CMD_STALE_EVENT_DISABLE (6 << 8) /* Disable stale event */
#define UARTDM_IMR 0xB0 /* Interrupt mask register */
#define UARTDM_ISR 0xB4 /* Interrupt status register */
#define UARTDM_ISR_TX_READY 0x80 /* TX FIFO empty */
#define UARTDM_TF 0x100 /* UART Transmit FIFO register */
#define UARTDM_RF 0x140 /* UART Receive FIFO register */
DECLARE_GLOBAL_DATA_PTR;
struct msm_serial_data {
phys_addr_t base;
unsigned chars_cnt; /* number of buffered chars */
uint32_t chars_buf; /* buffered chars */
};
static int msm_serial_fetch(struct udevice *dev)
{
struct msm_serial_data *priv = dev_get_priv(dev);
unsigned sr;
if (priv->chars_cnt)
return priv->chars_cnt;
/* Clear error in case of buffer overrun */
if (readl(priv->base + UARTDM_SR) & UARTDM_SR_UART_OVERRUN)
writel(UARTDM_CR_CMD_RESET_ERR, priv->base + UARTDM_CR);
/* We need to fetch new character */
sr = readl(priv->base + UARTDM_SR);
if (sr & UARTDM_SR_RX_READY) {
/* There are at least 4 bytes in fifo */
priv->chars_buf = readl(priv->base + UARTDM_RF);
priv->chars_cnt = 4;
} else {
/* Check if there is anything in fifo */
priv->chars_cnt = readl(priv->base + UARTDM_RXFS);
/* Extract number of characters in UART packing buffer*/
priv->chars_cnt = (priv->chars_cnt >>
UARTDM_RXFS_BUF_SHIFT) &
UARTDM_RXFS_BUF_MASK;
if (!priv->chars_cnt)
return 0;
/* There is at least one charcter, move it to fifo */
writel(UARTDM_CR_CMD_FORCE_STALE,
priv->base + UARTDM_CR);
priv->chars_buf = readl(priv->base + UARTDM_RF);
writel(UARTDM_CR_CMD_RESET_STALE_INT,
priv->base + UARTDM_CR);
writel(0x7, priv->base + UARTDM_DMRX);
}
return priv->chars_cnt;
}
static int msm_serial_getc(struct udevice *dev)
{
struct msm_serial_data *priv = dev_get_priv(dev);
char c;
if (!msm_serial_fetch(dev))
return -EAGAIN;
c = priv->chars_buf & 0xFF;
priv->chars_buf >>= 8;
priv->chars_cnt--;
return c;
}
static int msm_serial_putc(struct udevice *dev, const char ch)
{
struct msm_serial_data *priv = dev_get_priv(dev);
if (!(readl(priv->base + UARTDM_SR) & UARTDM_SR_TX_EMPTY) &&
!(readl(priv->base + UARTDM_ISR) & UARTDM_ISR_TX_READY))
return -EAGAIN;
writel(UARTDM_CR_CMD_RESET_TX_READY, priv->base + UARTDM_CR);
writel(1, priv->base + UARTDM_NCF_TX);
writel(ch, priv->base + UARTDM_TF);
return 0;
}
static int msm_serial_pending(struct udevice *dev, bool input)
{
if (input) {
if (msm_serial_fetch(dev))
return 1;
}
return 0;
}
static const struct dm_serial_ops msm_serial_ops = {
.putc = msm_serial_putc,
.pending = msm_serial_pending,
.getc = msm_serial_getc,
};
static int msm_uart_clk_init(struct udevice *dev)
{
uint clk_rate = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
"clock-frequency", 115200);
uint clkd[2]; /* clk_id and clk_no */
int clk_offset;
struct udevice *clk_dev;
struct clk clk;
int ret;
ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), "clock",
clkd, 2);
if (ret)
return ret;
clk_offset = fdt_node_offset_by_phandle(gd->fdt_blob, clkd[0]);
if (clk_offset < 0)
return clk_offset;
ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk_dev);
if (ret)
return ret;
clk.id = clkd[1];
ret = clk_request(clk_dev, &clk);
if (ret < 0)
return ret;
ret = clk_set_rate(&clk, clk_rate);
clk_free(&clk);
if (ret < 0)
return ret;
return 0;
}
static int msm_serial_probe(struct udevice *dev)
{
struct msm_serial_data *priv = dev_get_priv(dev);
msm_uart_clk_init(dev); /* Ignore return value and hope clock was
properly initialized by earlier loaders */
if (readl(priv->base + UARTDM_SR) & UARTDM_SR_UART_OVERRUN)
writel(UARTDM_CR_CMD_RESET_ERR, priv->base + UARTDM_CR);
writel(0, priv->base + UARTDM_IMR);
writel(UARTDM_CR_CMD_STALE_EVENT_DISABLE, priv->base + UARTDM_CR);
msm_serial_fetch(dev);
return 0;
}
static int msm_serial_ofdata_to_platdata(struct udevice *dev)
{
struct msm_serial_data *priv = dev_get_priv(dev);
priv->base = devfdt_get_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
return 0;
}
static const struct udevice_id msm_serial_ids[] = {
{ .compatible = "qcom,msm-uartdm-v1.4" },
{ }
};
U_BOOT_DRIVER(serial_msm) = {
.name = "serial_msm",
.id = UCLASS_SERIAL,
.of_match = msm_serial_ids,
.ofdata_to_platdata = msm_serial_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct msm_serial_data),
.probe = msm_serial_probe,
.ops = &msm_serial_ops,
};
|
