[PATCH] shpchp: cleanup bus speed handling

The code related to handling bus speed in SHPCHP driver is
unnecessarily complex. This patch cleans up and simplify that.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 189 insertions, 429 deletions

diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 10f3257..4e63814 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -198,7 +198,8 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
 
 	dbg("%s: change to speed %d\n", __FUNCTION__, speed);
 	if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
-		err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
+		err("%s: Issue of set bus speed mode command failed\n",
+		    __FUNCTION__);
 		return WRONG_BUS_FREQUENCY;
 	}
 	return rc;
@@ -209,33 +210,26 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
 		enum pci_bus_speed msp)
 { 
 	int rc = 0;
-	
-	if (flag != 0) { /* Other slots on the same bus are occupied */
-		if ( asp < bsp ) {
-			err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp);
-			return WRONG_BUS_FREQUENCY;
+
+	/*
+	 * If other slots on the same bus are occupied, we cannot
+	 * change the bus speed.
+	 */
+	if (flag) {
+		if (asp < bsp) {
+			err("%s: speed of bus %x and adapter %x mismatch\n",
+			    __FUNCTION__, bsp, asp);
+			rc = WRONG_BUS_FREQUENCY;
 		}
+		return rc;
+	}
+
+	if (asp < msp) {
+		if (bsp != asp)
+			rc = change_bus_speed(ctrl, pslot, asp);
 	} else {
-		/* Other slots on the same bus are empty */
-		if (msp == bsp) {
-		/* if adapter_speed >= bus_speed, do nothing */
-			if (asp < bsp) {
-				/* 
-				* Try to lower bus speed to accommodate the adapter if other slots 
-				* on the same controller are empty
-				*/
-				if ((rc = change_bus_speed(ctrl, pslot, asp)))
-					return rc;
-			} 
-		} else {
-			if (asp < msp) {
-				if ((rc = change_bus_speed(ctrl, pslot, asp)))
-					return rc;
-			} else {
-				if ((rc = change_bus_speed(ctrl, pslot, msp)))
-					return rc;
-			}
-		}
+		if (bsp != msp)
+			rc = change_bus_speed(ctrl, pslot, msp);
 	}
 	return rc;
 }
@@ -252,8 +246,7 @@ static int board_added(struct slot *p_slot)
 	u8 hp_slot;
 	u8 slots_not_empty = 0;
 	int rc = 0;
-	enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
-	u8 pi, mode;
+	enum pci_bus_speed asp, bsp, msp;
 	struct controller *ctrl = p_slot->ctrl;
 
 	hp_slot = p_slot->device - ctrl->slot_device_offset;
@@ -285,109 +278,36 @@ static int board_added(struct slot *p_slot)
 		}
 	}
  
-	rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
-	/* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */
-	/* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC,  0xa = PCI-X 133 Mhz 266, */
-	/* 0xd = PCI-X 133 Mhz 533 */
-	/* This encoding is different from the one used in cur_bus_speed & */
-	/* max_bus_speed */
-
-	if (rc  || adapter_speed == PCI_SPEED_UNKNOWN) {
-		err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
+	rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
+	if (rc) {
+		err("%s: Can't get adapter speed or bus mode mismatch\n",
+		    __FUNCTION__);
 		return WRONG_BUS_FREQUENCY;
 	}
 
-	rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
-	if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
+	rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
+	if (rc) {
 		err("%s: Can't get bus operation speed\n", __FUNCTION__);
 		return WRONG_BUS_FREQUENCY;
 	}
 
-	rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed);
-	if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) {
+	rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
+	if (rc) {
 		err("%s: Can't get max bus operation speed\n", __FUNCTION__);
-		max_bus_speed = bus_speed;
-	}
-
-	if ((rc  = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
-		err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
-		pi = 1;
+		msp = bsp;
 	}
 
 	/* Check if there are other slots or devices on the same bus */
 	if (!list_empty(&ctrl->pci_dev->subordinate->devices))
 		slots_not_empty = 1;
 
-	dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__, 
-		slots_not_empty, pi);
-	dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n", 
-		adapter_speed, bus_speed, max_bus_speed);
-
-	if (pi == 2) {
-		dbg("%s: In PI = %d\n", __FUNCTION__, pi);
-		if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) {
-			err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__);
-			mode = 0;
-		}
+	dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, "
+	    "max_bus_speed %d\n", __FUNCTION__, slots_not_empty, asp,
+	    bsp, msp);
 
-		switch (adapter_speed) {
-		case PCI_SPEED_133MHz_PCIX_533:
-		case PCI_SPEED_133MHz_PCIX_266:
-			if ((bus_speed != adapter_speed) &&
-			   ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 
-				return rc;
-			break;	
-		case PCI_SPEED_133MHz_PCIX_ECC:
-		case PCI_SPEED_133MHz_PCIX:
-			if (mode) { /* Bus - Mode 1 ECC */
-				if ((bus_speed != 0x7) &&
-				   ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 
-					return rc;
-			} else {
-				if ((bus_speed != 0x4) &&
-				   ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 
-					return rc;
-			}
-			break;
-		case PCI_SPEED_66MHz_PCIX_ECC:
-		case PCI_SPEED_66MHz_PCIX:
-			if (mode) { /* Bus - Mode 1 ECC */
-				if ((bus_speed != 0x5) &&
-				   ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 
-					return rc;
-			} else {
-				if ((bus_speed != 0x2) &&
-				   ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 
-					return rc;
-			}
-			break;
-		case PCI_SPEED_66MHz:
-			if ((bus_speed != 0x1) &&
-			   ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 
-				return rc;
-			break;	
-		case PCI_SPEED_33MHz:
-			if (bus_speed > 0x0) {
-				if (slots_not_empty == 0) {
-					if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed)))
-						return rc;
-				} else {
-					err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
-					return WRONG_BUS_FREQUENCY;
-				}
-			}
-			break;
-		default:
-			err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
-			return WRONG_BUS_FREQUENCY;
-		}
-	} else {
-		/* If adpater_speed == bus_speed, nothing to do here */
-		dbg("%s: In PI = %d\n", __FUNCTION__, pi);
-		if ((adapter_speed != bus_speed) &&
-		   ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
-				return rc;
-	}
+	rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
+	if (rc)
+		return rc;
 
 	/* turn on board, blink green LED, turn off Amber LED */
 	if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index b392606..66123cf 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -82,31 +82,6 @@
 #define SLOT_100MHZ_PCIX_533	0x0f000000
 #define SLOT_133MHZ_PCIX_533	0xf0000000
 
-
-/* Secondary Bus Configuration Register */
-/* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */
-#define PCI_33MHZ		0x0
-#define PCI_66MHZ		0x1
-#define PCIX_66MHZ		0x2
-#define PCIX_100MHZ		0x3
-#define PCIX_133MHZ		0x4
-
-/* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */
-#define PCI_33MHZ		0x0
-#define PCI_66MHZ		0x1
-#define PCIX_66MHZ		0x2
-#define PCIX_100MHZ		0x3
-#define PCIX_133MHZ		0x4
-#define PCIX_66MHZ_ECC		0x5
-#define PCIX_100MHZ_ECC		0x6
-#define PCIX_133MHZ_ECC		0x7
-#define PCIX_66MHZ_266		0x9
-#define PCIX_100MHZ_266		0xa
-#define PCIX_133MHZ_266		0xb
-#define PCIX_66MHZ_533		0x11
-#define PCIX_100MHZ_533		0x12
-#define PCIX_133MHZ_533		0x13
-
 /* Slot Configuration */
 #define SLOT_NUM		0x0000001F
 #define	FIRST_DEV_NUM		0x00001F00
@@ -548,81 +523,41 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
 
 static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
 {
-	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
-	u32 slot_reg;
-	u16 slot_status, sec_bus_status;
-	u8 m66_cap, pcix_cap, pi;
 	int retval = 0;
+	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+	u32 slot_reg = readl(php_ctlr->creg + SLOT1 + 4 * slot->hp_slot);
+	u8 pcix_cap = (slot_reg >> 12) & 7;
+	u8 m66_cap  = (slot_reg >> 9) & 1;
 
 	DBG_ENTER_ROUTINE 
 
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
-
-	if (slot->hp_slot >= php_ctlr->num_slots) {
-		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
-		return -1;
-	}
-	
-	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
-	dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg);
-	slot_status = (u16) slot_reg;
-	dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status);
-	sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
-
-	pcix_cap = (u8) ((slot_status & 0x3000) >> 12);
-	dbg("%s:  pcix_cap = %x\n", __FUNCTION__, pcix_cap);
-	m66_cap = (u8) ((slot_status & 0x0200) >> 9);
-	dbg("%s:  m66_cap = %x\n", __FUNCTION__, m66_cap);
+	dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
+	    __FUNCTION__, slot_reg, pcix_cap, m66_cap);
 
-
-	if (pi == 2) {
-		switch (pcix_cap) {
-		case 0:
-			*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
-			break;
-		case 1:
-			*value = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			*value = PCI_SPEED_133MHz_PCIX;
-			break;
-		case 4:
-			*value = PCI_SPEED_133MHz_PCIX_266;	
-			break;
-		case 5:
-			*value = PCI_SPEED_133MHz_PCIX_533;	
-			break;
-		case 2:	/* Reserved */
-		default:
-			*value = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			break;
-		}
-	} else {
-		switch (pcix_cap) {
-		case 0:
-			*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
-			break;
-		case 1:
-			*value = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			*value = PCI_SPEED_133MHz_PCIX;	
-			break;
-		case 2:	/* Reserved */
-		default:
-			*value = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			break;
-		}
+	switch (pcix_cap) {
+	case 0x0:
+		*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		*value = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		*value = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x4:
+		*value = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0x5:
+		*value = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	case 0x2:
+	default:
+		*value = PCI_SPEED_UNKNOWN;
+		retval = -ENODEV;
+		break;
 	}
 
 	dbg("Adapter speed = %d\n", *value);
-	
 	DBG_LEAVE_ROUTINE 
 	return retval;
 }
@@ -965,98 +900,66 @@ static int hpc_slot_disable(struct slot * slot)
 
 static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 {
-	u8 slot_cmd;
-	u8 pi;
-	int retval = 0;
+	int retval;
 	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+	u8 pi, cmd;
 
 	DBG_ENTER_ROUTINE 
-	
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
 
 	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	
-	if (pi == 1) {
-		switch (value) {
-		case 0:
-			slot_cmd = SETA_PCI_33MHZ;
-			break;
-		case 1:
-			slot_cmd = SETA_PCI_66MHZ;
-			break;
-		case 2:
-			slot_cmd = SETA_PCIX_66MHZ;
-			break;
-		case 3:
-			slot_cmd = SETA_PCIX_100MHZ;	
-			break;
-		case 4:
-			slot_cmd = SETA_PCIX_133MHZ;	
-			break;
-		default:
-			slot_cmd = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			return retval;	
-		}
-	} else {
-		switch (value) {
-		case 0:
-			slot_cmd = SETB_PCI_33MHZ;
-			break;
-		case 1:
-			slot_cmd = SETB_PCI_66MHZ;
-			break;
-		case 2:
-			slot_cmd = SETB_PCIX_66MHZ_PM;
-			break;
-		case 3:
-			slot_cmd = SETB_PCIX_100MHZ_PM;	
-			break;
-		case 4:
-			slot_cmd = SETB_PCIX_133MHZ_PM;	
-			break;
-		case 5:
-			slot_cmd = SETB_PCIX_66MHZ_EM;	
-			break;
-		case 6:
-			slot_cmd = SETB_PCIX_100MHZ_EM;	
-			break;
-		case 7:
-			slot_cmd = SETB_PCIX_133MHZ_EM;	
-			break;
-		case 8:
-			slot_cmd = SETB_PCIX_66MHZ_266;	
-			break;
-		case 0x9:
-			slot_cmd = SETB_PCIX_100MHZ_266;	
-			break;
-		case 0xa:
-			slot_cmd = SETB_PCIX_133MHZ_266;	
-			break;
-		case 0xb:
-			slot_cmd = SETB_PCIX_66MHZ_533;	
-			break;
-		case 0xc:
-			slot_cmd = SETB_PCIX_100MHZ_533;	
-			break;
-		case 0xd:
-			slot_cmd = SETB_PCIX_133MHZ_533;	
-			break;
-		default:
-			slot_cmd = PCI_SPEED_UNKNOWN;
-			retval = -ENODEV;
-			return retval;	
-		}
+	if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX))
+		return -EINVAL;
 
+	switch (value) {
+	case PCI_SPEED_33MHz:
+		cmd = SETA_PCI_33MHZ;
+		break;
+	case PCI_SPEED_66MHz:
+		cmd = SETA_PCI_66MHZ;
+		break;
+	case PCI_SPEED_66MHz_PCIX:
+		cmd = SETA_PCIX_66MHZ;
+		break;
+	case PCI_SPEED_100MHz_PCIX:
+		cmd = SETA_PCIX_100MHZ;
+		break;
+	case PCI_SPEED_133MHz_PCIX:
+		cmd = SETA_PCIX_133MHZ;
+		break;
+	case PCI_SPEED_66MHz_PCIX_ECC:
+		cmd = SETB_PCIX_66MHZ_EM;
+		break;
+	case PCI_SPEED_100MHz_PCIX_ECC:
+		cmd = SETB_PCIX_100MHZ_EM;
+		break;
+	case PCI_SPEED_133MHz_PCIX_ECC:
+		cmd = SETB_PCIX_133MHZ_EM;
+		break;
+	case PCI_SPEED_66MHz_PCIX_266:
+		cmd = SETB_PCIX_66MHZ_266;
+		break;
+	case PCI_SPEED_100MHz_PCIX_266:
+		cmd = SETB_PCIX_100MHZ_266;
+		break;
+	case PCI_SPEED_133MHz_PCIX_266:
+		cmd = SETB_PCIX_133MHZ_266;
+		break;
+	case PCI_SPEED_66MHz_PCIX_533:
+		cmd = SETB_PCIX_66MHZ_533;
+		break;
+	case PCI_SPEED_100MHz_PCIX_533:
+		cmd = SETB_PCIX_100MHZ_533;
+		break;
+	case PCI_SPEED_133MHz_PCIX_533:
+		cmd = SETB_PCIX_133MHZ_533;
+		break;
+	default:
+		return -EINVAL;
 	}
-	retval = shpc_write_cmd(slot, 0, slot_cmd);
-	if (retval) {
+
+	retval = shpc_write_cmd(slot, 0, cmd);
+	if (retval)
 		err("%s: Write command failed!\n", __FUNCTION__);
-		return -1;
-	}
 
 	DBG_LEAVE_ROUTINE
 	return retval;
@@ -1163,64 +1066,43 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
 
 static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 {
+	int retval = 0;
 	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
 	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
-	int retval = 0;
-	u8 pi;
-	u32 slot_avail1, slot_avail2;
+	u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
+	u32 slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
+	u32 slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
 
 	DBG_ENTER_ROUTINE 
 
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
-
-	if (slot->hp_slot >= php_ctlr->num_slots) {
-		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
-		return -1;
-	}
-
-	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
-	slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
-
 	if (pi == 2) {
 		if (slot_avail2 & SLOT_133MHZ_PCIX_533)
-			bus_speed = PCIX_133MHZ_533;
+			bus_speed = PCI_SPEED_133MHz_PCIX_533;
 		else if (slot_avail2 & SLOT_100MHZ_PCIX_533)
-			bus_speed = PCIX_100MHZ_533;
+			bus_speed = PCI_SPEED_100MHz_PCIX_533;
 		else if (slot_avail2 & SLOT_66MHZ_PCIX_533)
-			bus_speed = PCIX_66MHZ_533;
+			bus_speed = PCI_SPEED_66MHz_PCIX_533;
 		else if (slot_avail2 & SLOT_133MHZ_PCIX_266)
-			bus_speed = PCIX_133MHZ_266;
+			bus_speed = PCI_SPEED_133MHz_PCIX_266;
 		else if (slot_avail2 & SLOT_100MHZ_PCIX_266)
-			bus_speed = PCIX_100MHZ_266;
+			bus_speed = PCI_SPEED_100MHz_PCIX_266;
 		else if (slot_avail2 & SLOT_66MHZ_PCIX_266)
-			bus_speed = PCIX_66MHZ_266;
-		else if (slot_avail1 & SLOT_133MHZ_PCIX)
-			bus_speed = PCIX_133MHZ;
-		else if (slot_avail1 & SLOT_100MHZ_PCIX)
-			bus_speed = PCIX_100MHZ;
-		else if (slot_avail1 & SLOT_66MHZ_PCIX)
-			bus_speed = PCIX_66MHZ;
-		else if (slot_avail2 & SLOT_66MHZ)
-			bus_speed = PCI_66MHZ;
-		else if (slot_avail1 & SLOT_33MHZ)
-			bus_speed = PCI_33MHZ;
-		else bus_speed = PCI_SPEED_UNKNOWN;
-	} else {
+			bus_speed = PCI_SPEED_66MHz_PCIX_266;
+	}
+
+	if (bus_speed == PCI_SPEED_UNKNOWN) {
 		if (slot_avail1 & SLOT_133MHZ_PCIX)
-			bus_speed = PCIX_133MHZ;
+			bus_speed = PCI_SPEED_133MHz_PCIX;
 		else if (slot_avail1 & SLOT_100MHZ_PCIX)
-			bus_speed = PCIX_100MHZ;
+			bus_speed = PCI_SPEED_100MHz_PCIX;
 		else if (slot_avail1 & SLOT_66MHZ_PCIX)
-			bus_speed = PCIX_66MHZ;
+			bus_speed = PCI_SPEED_66MHz_PCIX;
 		else if (slot_avail2 & SLOT_66MHZ)
-			bus_speed = PCI_66MHZ;
+			bus_speed = PCI_SPEED_66MHz;
 		else if (slot_avail1 & SLOT_33MHZ)
-			bus_speed = PCI_33MHZ;
-		else bus_speed = PCI_SPEED_UNKNOWN;
+			bus_speed = PCI_SPEED_33MHz;
+		else
+			retval = -ENODEV;
 	}
 
 	*value = bus_speed;
@@ -1231,111 +1113,69 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 
 static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 {
+	int retval = 0;
 	struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
 	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
-	u16 sec_bus_status;
-	int retval = 0;
-	u8 pi;
+	u16 sec_bus_reg = readw(php_ctlr->creg + SEC_BUS_CONFIG);
+	u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
+	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
 
 	DBG_ENTER_ROUTINE 
 
-	if (!slot->ctrl->hpc_ctlr_handle) {
-		err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
-		return -1;
-	}
-
-	if (slot->hp_slot >= php_ctlr->num_slots) {
-		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
-		return -1;
+	if ((pi == 1) && (speed_mode > 4)) {
+		*value = PCI_SPEED_UNKNOWN;
+		return -ENODEV;
 	}
 
-	pi = readb(php_ctlr->creg + PROG_INTERFACE);
-	sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
-
-	if (pi == 2) {
-		switch (sec_bus_status & 0x000f) {
-		case 0:
-			bus_speed = PCI_SPEED_33MHz;
-			break;
-		case 1:
-			bus_speed = PCI_SPEED_66MHz;
-			break;
-		case 2:
-			bus_speed = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			bus_speed = PCI_SPEED_100MHz_PCIX;	
-			break;
-		case 4:
-			bus_speed = PCI_SPEED_133MHz_PCIX;	
-			break;
-		case 5:
-			bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
-			break;
-		case 6:
-			bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
-			break;
-		case 7:
-			bus_speed = PCI_SPEED_133MHz_PCIX_ECC;	
-			break;
-		case 8:
-			bus_speed = PCI_SPEED_66MHz_PCIX_266;	
-			break;
-		case 9:
-			bus_speed = PCI_SPEED_100MHz_PCIX_266;	
-			break;
-		case 0xa:
-			bus_speed = PCI_SPEED_133MHz_PCIX_266;	
-			break;
-		case 0xb:
-			bus_speed = PCI_SPEED_66MHz_PCIX_533;	
-			break;
-		case 0xc:
-			bus_speed = PCI_SPEED_100MHz_PCIX_533;	
-			break;
-		case 0xd:
-			bus_speed = PCI_SPEED_133MHz_PCIX_533;	
-			break;
-		case 0xe:
-		case 0xf:
-		default:
-			bus_speed = PCI_SPEED_UNKNOWN;
-			break;
-		}
-	} else {
-		/* In the case where pi is undefined, default it to 1 */ 
-		switch (sec_bus_status & 0x0007) {
-		case 0:
-			bus_speed = PCI_SPEED_33MHz;
-			break;
-		case 1:
-			bus_speed = PCI_SPEED_66MHz;
-			break;
-		case 2:
-			bus_speed = PCI_SPEED_66MHz_PCIX;
-			break;
-		case 3:
-			bus_speed = PCI_SPEED_100MHz_PCIX;	
-			break;
-		case 4:
-			bus_speed = PCI_SPEED_133MHz_PCIX;	
-			break;
-		case 5:
-			bus_speed = PCI_SPEED_UNKNOWN;		/*	Reserved */
-			break;
-		case 6:
-			bus_speed = PCI_SPEED_UNKNOWN;		/*	Reserved */
-			break;
-		case 7:
-			bus_speed = PCI_SPEED_UNKNOWN;		/*	Reserved */	
-			break;
-		default:
-			bus_speed = PCI_SPEED_UNKNOWN;
-			break;
-		}
+	switch (speed_mode) {
+	case 0x0:
+		*value = PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		*value = PCI_SPEED_66MHz;
+		break;
+	case 0x2:
+		*value = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		*value = PCI_SPEED_100MHz_PCIX;
+		break;
+	case 0x4:
+		*value = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x5:
+		*value = PCI_SPEED_66MHz_PCIX_ECC;
+		break;
+	case 0x6:
+		*value = PCI_SPEED_100MHz_PCIX_ECC;
+		break;
+	case 0x7:
+		*value = PCI_SPEED_133MHz_PCIX_ECC;
+		break;
+	case 0x8:
+		*value = PCI_SPEED_66MHz_PCIX_266;
+		break;
+	case 0x9:
+		*value = PCI_SPEED_100MHz_PCIX_266;
+		break;
+	case 0xa:
+		*value = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0xb:
+		*value = PCI_SPEED_66MHz_PCIX_533;
+		break;
+	case 0xc:
+		*value = PCI_SPEED_100MHz_PCIX_533;
+		break;
+	case 0xd:
+		*value = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	default:
+		*value = PCI_SPEED_UNKNOWN;
+		retval = -ENODEV;
+		break;
 	}
 
-	*value = bus_speed;
 	dbg("Current bus speed = %d\n", bus_speed);
 	DBG_LEAVE_ROUTINE 
 	return retval;