Merge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge

33 files changed, 1229 insertions, 131 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
new file mode 100644
index 0000000..5ac1e01
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -0,0 +1,46 @@
+What:		/sys/class/bdi/<bdi>/
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+
+Provide a place in sysfs for the backing_dev_info object.  This allows
+setting and retrieving various BDI specific variables.
+
+The <bdi> identifier can be either of the following:
+
+MAJOR:MINOR
+
+	Device number for block devices, or value of st_dev on
+	non-block filesystems which provide their own BDI, such as NFS
+	and FUSE.
+
+default
+
+	The default backing dev, used for non-block device backed
+	filesystems which do not provide their own BDI.
+
+Files under /sys/class/bdi/<bdi>/
+---------------------------------
+
+read_ahead_kb (read-write)
+
+	Size of the read-ahead window in kilobytes
+
+min_ratio (read-write)
+
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_ratio' parameter allows assigning a minimum
+	percentage of the write-back cache to a particular device.
+	For example, this is useful for providing a minimum QoS.
+
+max_ratio (read-write)
+
+	Allows limiting a particular device to use not more than the
+	given percentage of the write-back cache.  This is useful in
+	situations where we want to avoid one device taking all or
+	most of the write-back cache.  For example in case of an NFS
+	mount that is prone to get stuck, or a FUSE mount which cannot
+	be trusted to play fair.
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index b939ebb..80d1504 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -145,7 +145,7 @@ Part Ic - DMA addressing limitations
 int
 dma_supported(struct device *dev, u64 mask)
 int
-pci_dma_supported(struct device *dev, u64 mask)
+pci_dma_supported(struct pci_dev *hwdev, u64 mask)
 
 Checks to see if the device can support DMA to the memory described by
 mask.
@@ -189,7 +189,7 @@ dma_addr_t
 dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 		      enum dma_data_direction direction)
 dma_addr_t
-pci_map_single(struct device *dev, void *cpu_addr, size_t size,
+pci_map_single(struct pci_dev *hwdev, void *cpu_addr, size_t size,
 		      int direction)
 
 Maps a piece of processor virtual memory so it can be accessed by the
@@ -395,6 +395,71 @@ Notes:  You must do this:
 
 See also dma_map_single().
 
+dma_addr_t
+dma_map_single_attrs(struct device *dev, void *cpu_addr, size_t size,
+		     enum dma_data_direction dir,
+		     struct dma_attrs *attrs)
+
+void
+dma_unmap_single_attrs(struct device *dev, dma_addr_t dma_addr,
+		       size_t size, enum dma_data_direction dir,
+		       struct dma_attrs *attrs)
+
+int
+dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl,
+		 int nents, enum dma_data_direction dir,
+		 struct dma_attrs *attrs)
+
+void
+dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sgl,
+		   int nents, enum dma_data_direction dir,
+		   struct dma_attrs *attrs)
+
+The four functions above are just like the counterpart functions
+without the _attrs suffixes, except that they pass an optional
+struct dma_attrs*.
+
+struct dma_attrs encapsulates a set of "dma attributes". For the
+definition of struct dma_attrs see linux/dma-attrs.h.
+
+The interpretation of dma attributes is architecture-specific, and
+each attribute should be documented in Documentation/DMA-attributes.txt.
+
+If struct dma_attrs* is NULL, the semantics of each of these
+functions is identical to those of the corresponding function
+without the _attrs suffix. As a result dma_map_single_attrs()
+can generally replace dma_map_single(), etc.
+
+As an example of the use of the *_attrs functions, here's how
+you could pass an attribute DMA_ATTR_FOO when mapping memory
+for DMA:
+
+#include <linux/dma-attrs.h>
+/* DMA_ATTR_FOO should be defined in linux/dma-attrs.h and
+ * documented in Documentation/DMA-attributes.txt */
+...
+
+	DEFINE_DMA_ATTRS(attrs);
+	dma_set_attr(DMA_ATTR_FOO, &attrs);
+	....
+	n = dma_map_sg_attrs(dev, sg, nents, DMA_TO_DEVICE, &attr);
+	....
+
+Architectures that care about DMA_ATTR_FOO would check for its
+presence in their implementations of the mapping and unmapping
+routines, e.g.:
+
+void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
+			     size_t size, enum dma_data_direction dir,
+			     struct dma_attrs *attrs)
+{
+	....
+	int foo =  dma_get_attr(DMA_ATTR_FOO, attrs);
+	....
+	if (foo)
+		/* twizzle the frobnozzle */
+	....
+
 
 Part II - Advanced dma_ usage
 -----------------------------
diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt
new file mode 100644
index 0000000..6d772f8
--- /dev/null
+++ b/Documentation/DMA-attributes.txt
@@ -0,0 +1,24 @@
+			DMA attributes
+			==============
+
+This document describes the semantics of the DMA attributes that are
+defined in linux/dma-attrs.h.
+
+DMA_ATTR_WRITE_BARRIER
+----------------------
+
+DMA_ATTR_WRITE_BARRIER is a (write) barrier attribute for DMA.  DMA
+to a memory region with the DMA_ATTR_WRITE_BARRIER attribute forces
+all pending DMA writes to complete, and thus provides a mechanism to
+strictly order DMA from a device across all intervening busses and
+bridges.  This barrier is not specific to a particular type of
+interconnect, it applies to the system as a whole, and so its
+implementation must account for the idiosyncracies of the system all
+the way from the DMA device to memory.
+
+As an example of a situation where DMA_ATTR_WRITE_BARRIER would be
+useful, suppose that a device does a DMA write to indicate that data is
+ready and available in memory.  The DMA of the "completion indication"
+could race with data DMA.  Mapping the memory used for completion
+indications with DMA_ATTR_WRITE_BARRIER would prevent the race.
+
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index d84f89d..b463ecd 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -315,11 +315,11 @@ you should do:
 
 	dma_addr_t dma_handle;
 
-	cpu_addr = pci_alloc_consistent(dev, size, &dma_handle);
+	cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle);
 
-where dev is a struct pci_dev *. You should pass NULL for PCI like buses
-where devices don't have struct pci_dev (like ISA, EISA).  This may be
-called in interrupt context. 
+where pdev is a struct pci_dev *. This may be called in interrupt context.
+You should use dma_alloc_coherent (see DMA-API.txt) for buses
+where devices don't have struct pci_dev (like ISA, EISA).
 
 This argument is needed because the DMA translations may be bus
 specific (and often is private to the bus which the device is attached
@@ -332,7 +332,7 @@ __get_free_pages (but takes size instead of a page order).  If your
 driver needs regions sized smaller than a page, you may prefer using
 the pci_pool interface, described below.
 
-The consistent DMA mapping interfaces, for non-NULL dev, will by
+The consistent DMA mapping interfaces, for non-NULL pdev, will by
 default return a DMA address which is SAC (Single Address Cycle)
 addressable.  Even if the device indicates (via PCI dma mask) that it
 may address the upper 32-bits and thus perform DAC cycles, consistent
@@ -354,9 +354,9 @@ buffer you receive will not cross a 64K boundary.
 
 To unmap and free such a DMA region, you call:
 
-	pci_free_consistent(dev, size, cpu_addr, dma_handle);
+	pci_free_consistent(pdev, size, cpu_addr, dma_handle);
 
-where dev, size are the same as in the above call and cpu_addr and
+where pdev, size are the same as in the above call and cpu_addr and
 dma_handle are the values pci_alloc_consistent returned to you.
 This function may not be called in interrupt context.
 
@@ -371,9 +371,9 @@ Create a pci_pool like this:
 
 	struct pci_pool *pool;
 
-	pool = pci_pool_create(name, dev, size, align, alloc);
+	pool = pci_pool_create(name, pdev, size, align, alloc);
 
-The "name" is for diagnostics (like a kmem_cache name); dev and size
+The "name" is for diagnostics (like a kmem_cache name); pdev and size
 are as above.  The device's hardware alignment requirement for this
 type of data is "align" (which is expressed in bytes, and must be a
 power of two).  If your device has no boundary crossing restrictions,
@@ -472,11 +472,11 @@ To map a single region, you do:
 	void *addr = buffer->ptr;
 	size_t size = buffer->len;
 
-	dma_handle = pci_map_single(dev, addr, size, direction);
+	dma_handle = pci_map_single(pdev, addr, size, direction);
 
 and to unmap it:
 
-	pci_unmap_single(dev, dma_handle, size, direction);
+	pci_unmap_single(pdev, dma_handle, size, direction);
 
 You should call pci_unmap_single when the DMA activity is finished, e.g.
 from the interrupt which told you that the DMA transfer is done.
@@ -493,17 +493,17 @@ Specifically:
 	unsigned long offset = buffer->offset;
 	size_t size = buffer->len;
 
-	dma_handle = pci_map_page(dev, page, offset, size, direction);
+	dma_handle = pci_map_page(pdev, page, offset, size, direction);
 
 	...
 
-	pci_unmap_page(dev, dma_handle, size, direction);
+	pci_unmap_page(pdev, dma_handle, size, direction);
 
 Here, "offset" means byte offset within the given page.
 
 With scatterlists, you map a region gathered from several regions by:
 
-	int i, count = pci_map_sg(dev, sglist, nents, direction);
+	int i, count = pci_map_sg(pdev, sglist, nents, direction);
 	struct scatterlist *sg;
 
 	for_each_sg(sglist, sg, count, i) {
@@ -527,7 +527,7 @@ accessed sg->address and sg->length as shown above.
 
 To unmap a scatterlist, just call:
 
-	pci_unmap_sg(dev, sglist, nents, direction);
+	pci_unmap_sg(pdev, sglist, nents, direction);
 
 Again, make sure DMA activity has already finished.
 
@@ -550,11 +550,11 @@ correct copy of the DMA buffer.
 So, firstly, just map it with pci_map_{single,sg}, and after each DMA
 transfer call either:
 
-	pci_dma_sync_single_for_cpu(dev, dma_handle, size, direction);
+	pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction);
 
 or:
 
-	pci_dma_sync_sg_for_cpu(dev, sglist, nents, direction);
+	pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction);
 
 as appropriate.
 
@@ -562,7 +562,7 @@ Then, if you wish to let the device get at the DMA area again,
 finish accessing the data with the cpu, and then before actually
 giving the buffer to the hardware call either:
 
-	pci_dma_sync_single_for_device(dev, dma_handle, size, direction);
+	pci_dma_sync_single_for_device(pdev, dma_handle, size, direction);
 
 or:
 
@@ -739,7 +739,7 @@ failure can be determined by:
 
 	dma_addr_t dma_handle;
 
-	dma_handle = pci_map_single(dev, addr, size, direction);
+	dma_handle = pci_map_single(pdev, addr, size, direction);
 	if (pci_dma_mapping_error(dma_handle)) {
 		/*
 		 * reduce current DMA mapping usage,
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 83966e9..0eb0d02 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml
+	    mac80211.xml debugobjects.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl
new file mode 100644
index 0000000..7f5f218
--- /dev/null
+++ b/Documentation/DocBook/debugobjects.tmpl
@@ -0,0 +1,391 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="debug-objects-guide">
+ <bookinfo>
+  <title>Debug objects life time</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Thomas</firstname>
+    <surname>Gleixner</surname>
+    <affiliation>
+     <address>
+      <email>tglx@linutronix.de</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2008</year>
+   <holder>Thomas Gleixner</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License version 2 as published by the Free Software Foundation.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="intro">
+    <title>Introduction</title>
+    <para>
+      debugobjects is a generic infrastructure to track the life time
+      of kernel objects and validate the operations on those.
+    </para>
+    <para>
+      debugobjects is useful to check for the following error patterns:
+	<itemizedlist>
+	  <listitem><para>Activation of uninitialized objects</para></listitem>
+	  <listitem><para>Initialization of active objects</para></listitem>
+	  <listitem><para>Usage of freed/destroyed objects</para></listitem>
+	</itemizedlist>
+    </para>
+    <para>
+      debugobjects is not changing the data structure of the real
+      object so it can be compiled in with a minimal runtime impact
+      and enabled on demand with a kernel command line option.
+    </para>
+  </chapter>
+
+  <chapter id="howto">
+    <title>Howto use debugobjects</title>
+    <para>
+      A kernel subsystem needs to provide a data structure which
+      describes the object type and add calls into the debug code at
+      appropriate places. The data structure to describe the object
+      type needs at minimum the name of the object type. Optional
+      functions can and should be provided to fixup detected problems
+      so the kernel can continue to work and the debug information can
+      be retrieved from a live system instead of hard core debugging
+      with serial consoles and stack trace transcripts from the
+      monitor.
+    </para>
+    <para>
+      The debug calls provided by debugobjects are:
+      <itemizedlist>
+	<listitem><para>debug_object_init</para></listitem>
+	<listitem><para>debug_object_init_on_stack</para></listitem>
+	<listitem><para>debug_object_activate</para></listitem>
+	<listitem><para>debug_object_deactivate</para></listitem>
+	<listitem><para>debug_object_destroy</para></listitem>
+	<listitem><para>debug_object_free</para></listitem>
+      </itemizedlist>
+      Each of these functions takes the address of the real object and
+      a pointer to the object type specific debug description
+      structure.
+    </para>
+    <para>
+      Each detected error is reported in the statistics and a limited
+      number of errors are printk'ed including a full stack trace.
+    </para>
+    <para>
+      The statistics are available via debugfs/debug_objects/stats.
+      They provide information about the number of warnings and the
+      number of successful fixups along with information about the
+      usage of the internal tracking objects and the state of the
+      internal tracking objects pool.
+    </para>
+  </chapter>
+  <chapter id="debugfunctions">
+    <title>Debug functions</title>
+    <sect1 id="prototypes">
+      <title>Debug object function reference</title>
+!Elib/debugobjects.c
+    </sect1>
+    <sect1 id="debug_object_init">
+      <title>debug_object_init</title>
+      <para>
+	This function is called whenever the initialization function
+	of a real object is called.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	checked, whether the object can be initialized.  Initializing
+	is not allowed for active and destroyed objects. When
+	debugobjects detects an error, then it calls the fixup_init
+	function of the object type description structure if provided
+	by the caller. The fixup function can correct the problem
+	before the real initialization of the object happens. E.g. it
+	can deactivate an active object in order to prevent damage to
+	the subsystem.
+      </para>
+      <para>
+	When the real object is not yet tracked by debugobjects,
+	debugobjects allocates a tracker object for the real object
+	and sets the tracker object state to ODEBUG_STATE_INIT. It
+	verifies that the object is not on the callers stack. If it is
+	on the callers stack then a limited number of warnings
+	including a full stack trace is printk'ed. The calling code
+	must use debug_object_init_on_stack() and remove the object
+	before leaving the function which allocated it. See next
+	section.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_init_on_stack">
+      <title>debug_object_init_on_stack</title>
+      <para>
+	This function is called whenever the initialization function
+	of a real object which resides on the stack is called.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	checked, whether the object can be initialized. Initializing
+	is not allowed for active and destroyed objects. When
+	debugobjects detects an error, then it calls the fixup_init
+	function of the object type description structure if provided
+	by the caller. The fixup function can correct the problem
+	before the real initialization of the object happens. E.g. it
+	can deactivate an active object in order to prevent damage to
+	the subsystem.
+      </para>
+      <para>
+	When the real object is not yet tracked by debugobjects
+	debugobjects allocates a tracker object for the real object
+	and sets the tracker object state to ODEBUG_STATE_INIT. It
+	verifies that the object is on the callers stack.
+      </para>
+      <para>
+	An object which is on the stack must be removed from the
+	tracker by calling debug_object_free() before the function
+	which allocates the object returns. Otherwise we keep track of
+	stale objects.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_activate">
+      <title>debug_object_activate</title>
+      <para>
+	This function is called whenever the activation function of a
+	real object is called.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	checked, whether the object can be activated.  Activating is
+	not allowed for active and destroyed objects. When
+	debugobjects detects an error, then it calls the
+	fixup_activate function of the object type description
+	structure if provided by the caller. The fixup function can
+	correct the problem before the real activation of the object
+	happens. E.g. it can deactivate an active object in order to
+	prevent damage to the subsystem.
+      </para>
+      <para>
+	When the real object is not yet tracked by debugobjects then
+	the fixup_activate function is called if available. This is
+	necessary to allow the legitimate activation of statically
+	allocated and initialized objects. The fixup function checks
+	whether the object is valid and calls the debug_objects_init()
+	function to initialize the tracking of this object.
+      </para>
+      <para>
+	When the activation is legitimate, then the state of the
+	associated tracker object is set to ODEBUG_STATE_ACTIVE.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_deactivate">
+      <title>debug_object_deactivate</title>
+      <para>
+	This function is called whenever the deactivation function of
+	a real object is called.
+      </para>
+      <para>
+	When the real object is tracked by debugobjects it is checked,
+	whether the object can be deactivated. Deactivating is not
+	allowed for untracked or destroyed objects.
+      </para>
+      <para>
+	When the deactivation is legitimate, then the state of the
+	associated tracker object is set to ODEBUG_STATE_INACTIVE.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_destroy">
+      <title>debug_object_destroy</title>
+      <para>
+	This function is called to mark an object destroyed. This is
+	useful to prevent the usage of invalid objects, which are
+	still available in memory: either statically allocated objects
+	or objects which are freed later.
+      </para>
+      <para>
+	When the real object is tracked by debugobjects it is checked,
+	whether the object can be destroyed. Destruction is not
+	allowed for active and destroyed objects. When debugobjects
+	detects an error, then it calls the fixup_destroy function of
+	the object type description structure if provided by the
+	caller. The fixup function can correct the problem before the
+	real destruction of the object happens. E.g. it can deactivate
+	an active object in order to prevent damage to the subsystem.
+      </para>
+      <para>
+	When the destruction is legitimate, then the state of the
+	associated tracker object is set to ODEBUG_STATE_DESTROYED.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_free">
+      <title>debug_object_free</title>
+      <para>
+	This function is called before an object is freed.
+      </para>
+      <para>
+	When the real object is tracked by debugobjects it is checked,
+	whether the object can be freed. Free is not allowed for
+	active objects. When debugobjects detects an error, then it
+	calls the fixup_free function of the object type description
+	structure if provided by the caller. The fixup function can
+	correct the problem before the real free of the object
+	happens. E.g. it can deactivate an active object in order to
+	prevent damage to the subsystem.
+      </para>
+      <para>
+	Note that debug_object_free removes the object from the
+	tracker. Later usage of the object is detected by the other
+	debug checks.
+      </para>
+    </sect1>
+  </chapter>
+  <chapter id="fixupfunctions">
+    <title>Fixup functions</title>
+    <sect1 id="debug_obj_descr">
+      <title>Debug object type description structure</title>
+!Iinclude/linux/debugobjects.h
+    </sect1>
+    <sect1 id="fixup_init">
+      <title>fixup_init</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_init is detected. The function takes the
+	address of the object and the state which is currently
+	recorded in the tracker.
+      </para>
+      <para>
+	Called from debug_object_init when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+      <para>
+	Note, that the function needs to call the debug_object_init()
+	function again, after the damage has been repaired in order to
+	keep the state consistent.
+      </para>
+    </sect1>
+
+    <sect1 id="fixup_activate">
+      <title>fixup_activate</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_activate is detected.
+      </para>
+      <para>
+	Called from debug_object_activate when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_NOTAVAILABLE</para></listitem>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+      <para>
+	Note that the function needs to call the debug_object_activate()
+	function again after the damage has been repaired in order to
+	keep the state consistent.
+      </para>
+      <para>
+	The activation of statically initialized objects is a special
+	case. When debug_object_activate() has no tracked object for
+	this object address then fixup_activate() is called with
+	object state ODEBUG_STATE_NOTAVAILABLE. The fixup function
+	needs to check whether this is a legitimate case of a
+	statically initialized object or not. In case it is it calls
+	debug_object_init() and debug_object_activate() to make the
+	object known to the tracker and marked active. In this case
+	the function should return 0 because this is not a real fixup.
+      </para>
+    </sect1>
+
+    <sect1 id="fixup_destroy">
+      <title>fixup_destroy</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_destroy is detected.
+      </para>
+      <para>
+	Called from debug_object_destroy when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+    </sect1>
+    <sect1 id="fixup_free">
+      <title>fixup_free</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_free is detected. Further it can be called
+	from the debug checks in kfree/vfree, when an active object is
+	detected from the debug_check_no_obj_freed() sanity checks.
+      </para>
+      <para>
+	Called from debug_object_free() or debug_check_no_obj_freed()
+	when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+    </sect1>
+  </chapter>
+  <chapter id="bugs">
+    <title>Known Bugs And Assumptions</title>
+    <para>
+	None (knock on wood).
+    </para>
+  </chapter>
+</book>
diff --git a/Documentation/DocBook/rapidio.tmpl b/Documentation/DocBook/rapidio.tmpl
index b9e143e..54eb26b 100644
--- a/Documentation/DocBook/rapidio.tmpl
+++ b/Documentation/DocBook/rapidio.tmpl
@@ -133,7 +133,6 @@
 !Idrivers/rapidio/rio-sysfs.c
      </sect1>
      <sect1 id="PPC32_support"><title>PPC32 support</title>
-!Iarch/powerpc/kernel/rio.c
 !Earch/powerpc/sysdev/fsl_rio.c
 !Iarch/powerpc/sysdev/fsl_rio.c
      </sect1>
diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt
new file mode 100644
index 0000000..000b0fb
--- /dev/null
+++ b/Documentation/braille-console.txt
@@ -0,0 +1,34 @@
+                       Linux Braille Console
+
+To get early boot messages on a braille device (before userspace screen
+readers can start), you first need to compile the support for the usual serial
+console (see serial-console.txt), and for braille device (in Device Drivers -
+Accessibility).
+
+Then you need to specify a console=brl, option on the kernel command line, the
+format is:
+
+	console=brl,serial_options...
+
+where serial_options... are the same as described in serial-console.txt
+
+So for instance you can use console=brl,ttyS0 if the braille device is connected
+to the first serial port, and console=brl,ttyS0,115200 to override the baud rate
+to 115200, etc.
+
+By default, the braille device will just show the last kernel message (console
+mode).  To review previous messages, press the Insert key to switch to the VT
+review mode.  In review mode, the arrow keys permit to browse in the VT content,
+page up/down keys go at the top/bottom of the screen, and the home key goes back
+to the cursor, hence providing very basic screen reviewing facility.
+
+Sound feedback can be obtained by adding the braille_console.sound=1 kernel
+parameter.
+
+For simplicity, only one braille console can be enabled, other uses of
+console=brl,... will be discarded.  Also note that it does not interfere with
+the console selection mecanism described in serial-console.txt
+
+For now, only the VisioBraille device is supported.
+
+Samuel Thibault <samuel.thibault@ens-lyon.org>
diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt
index 31d12e2..c298a66 100644
--- a/Documentation/cgroups.txt
+++ b/Documentation/cgroups.txt
@@ -500,8 +500,7 @@ post-attachment activity that requires memory allocations or blocking.
 
 void fork(struct cgroup_subsy *ss, struct task_struct *task)
 
-Called when a task is forked into a cgroup. Also called during
-registration for all existing tasks.
+Called when a task is forked into a cgroup.
 
 void exit(struct cgroup_subsys *ss, struct task_struct *task)
 
diff --git a/Documentation/controllers/devices.txt b/Documentation/controllers/devices.txt
new file mode 100644
index 0000000..4dcea42
--- /dev/null
+++ b/Documentation/controllers/devices.txt
@@ -0,0 +1,48 @@
+Device Whitelist Controller
+
+1. Description:
+
+Implement a cgroup to track and enforce open and mknod restrictions
+on device files.  A device cgroup associates a device access
+whitelist with each cgroup.  A whitelist entry has 4 fields.
+'type' is a (all), c (char), or b (block).  'all' means it applies
+to all types and all major and minor numbers.  Major and minor are
+either an integer or * for all.  Access is a composition of r
+(read), w (write), and m (mknod).
+
+The root device cgroup starts with rwm to 'all'.  A child device
+cgroup gets a copy of the parent.  Administrators can then remove
+devices from the whitelist or add new entries.  A child cgroup can
+never receive a device access which is denied its parent.  However
+when a device access is removed from a parent it will not also be
+removed from the child(ren).
+
+2. User Interface
+
+An entry is added using devices.allow, and removed using
+devices.deny.  For instance
+
+	echo 'c 1:3 mr' > /cgroups/1/devices.allow
+
+allows cgroup 1 to read and mknod the device usually known as
+/dev/null.  Doing
+
+	echo a > /cgroups/1/devices.deny
+
+will remove the default 'a *:* mrw' entry.
+
+3. Security
+
+Any task can move itself between cgroups.  This clearly won't
+suffice, but we can decide the best way to adequately restrict
+movement as people get some experience with this.  We may just want
+to require CAP_SYS_ADMIN, which at least is a separate bit from
+CAP_MKNOD.  We may want to just refuse moving to a cgroup which
+isn't a descendent of the current one.  Or we may want to use
+CAP_MAC_ADMIN, since we really are trying to lock down root.
+
+CAP_SYS_ADMIN is needed to modify the whitelist or move another
+task to a new cgroup.  (Again we'll probably want to change that).
+
+A cgroup may not be granted more permissions than the cgroup's
+parent has.
diff --git a/Documentation/controllers/resource_counter.txt b/Documentation/controllers/resource_counter.txt
new file mode 100644
index 0000000..f196ac1
--- /dev/null
+++ b/Documentation/controllers/resource_counter.txt
@@ -0,0 +1,181 @@
+
+		The Resource Counter
+
+The resource counter, declared at include/linux/res_counter.h,
+is supposed to facilitate the resource management by controllers
+by providing common stuff for accounting.
+
+This "stuff" includes the res_counter structure and routines
+to work with it.
+
+
+
+1. Crucial parts of the res_counter structure
+
+ a. unsigned long long usage
+
+ 	The usage value shows the amount of a resource that is consumed
+	by a group at a given time. The units of measurement should be
+	determined by the controller that uses this counter. E.g. it can
+	be bytes, items or any other unit the controller operates on.
+
+ b. unsigned long long max_usage
+
+ 	The maximal value of the usage over time.
+
+ 	This value is useful when gathering statistical information about
+	the particular group, as it shows the actual resource requirements
+	for a particular group, not just some usage snapshot.
+
+ c. unsigned long long limit
+
+ 	The maximal allowed amount of resource to consume by the group. In
+	case the group requests for more resources, so that the usage value
+	would exceed the limit, the resource allocation is rejected (see
+	the next section).
+
+ d. unsigned long long failcnt
+
+ 	The failcnt stands for "failures counter". This is the number of
+	resource allocation attempts that failed.
+
+ c. spinlock_t lock
+
+ 	Protects changes of the above values.
+
+
+
+2. Basic accounting routines
+
+ a. void res_counter_init(struct res_counter *rc)
+
+ 	Initializes the resource counter. As usual, should be the first
+	routine called for a new counter.
+
+ b. int res_counter_charge[_locked]
+			(struct res_counter *rc, unsigned long val)
+
+	When a resource is about to be allocated it has to be accounted
+	with the appropriate resource counter (controller should determine
+	which one to use on its own). This operation is called "charging".
+
+	This is not very important which operation - resource allocation
+	or charging - is performed first, but
+	  * if the allocation is performed first, this may create a
+	    temporary resource over-usage by the time resource counter is
+	    charged;
+	  * if the charging is performed first, then it should be uncharged
+	    on error path (if the one is called).
+
+ c. void res_counter_uncharge[_locked]
+			(struct res_counter *rc, unsigned long val)
+
+	When a resource is released (freed) it should be de-accounted
+	from the resource counter it was accounted to.  This is called
+	"uncharging".
+
+    The _locked routines imply that the res_counter->lock is taken.
+
+
+ 2.1 Other accounting routines
+
+    There are more routines that may help you with common needs, like
+    checking whether the limit is reached or resetting the max_usage
+    value. They are all declared in include/linux/res_counter.h.
+
+
+
+3. Analyzing the resource counter registrations
+
+ a. If the failcnt value constantly grows, this means that the counter's
+    limit is too tight. Either the group is misbehaving and consumes too
+    many resources, or the configuration is not suitable for the group
+    and the limit should be increased.
+
+ b. The max_usage value can be used to quickly tune the group. One may
+    set the limits to maximal values and either load the container with
+    a common pattern or leave one for a while. After this the max_usage
+    value shows the amount of memory the container would require during
+    its common activity.
+
+    Setting the limit a bit above this value gives a pretty good
+    configuration that works in most of the cases.
+
+ c. If the max_usage is much less than the limit, but the failcnt value
+    is growing, then the group tries to allocate a big chunk of resource
+    at once.
+
+ d. If the max_usage is much less than the limit, but the failcnt value
+    is 0, then this group is given too high limit, that it does not
+    require. It is better to lower the limit a bit leaving more resource
+    for other groups.
+
+
+
+4. Communication with the control groups subsystem (cgroups)
+
+All the resource controllers that are using cgroups and resource counters
+should provide files (in the cgroup filesystem) to work with the resource
+counter fields. They are recommended to adhere to the following rules:
+
+ a. File names
+
+ 	Field name	File name
+	---------------------------------------------------
+	usage		usage_in_<unit_of_measurement>
+	max_usage	max_usage_in_<unit_of_measurement>
+	limit		limit_in_<unit_of_measurement>
+	failcnt		failcnt
+	lock		no file :)
+
+ b. Reading from file should show the corresponding field value in the
+    appropriate format.
+
+ c. Writing to file
+
+ 	Field		Expected behavior
+	----------------------------------
+	usage		prohibited
+	max_usage	reset to usage
+	limit		set the limit
+	failcnt		reset to zero
+
+
+
+5. Usage example
+
+ a. Declare a task group (take a look at cgroups subsystem for this) and
+    fold a res_counter into it
+
+	struct my_group {
+		struct res_counter res;
+
+		<other fields>
+	}
+
+ b. Put hooks in resource allocation/release paths
+
+ 	int alloc_something(...)
+	{
+		if (res_counter_charge(res_counter_ptr, amount) < 0)
+			return -ENOMEM;
+
+		<allocate the resource and return to the caller>
+	}
+
+	void release_something(...)
+	{
+		res_counter_uncharge(res_counter_ptr, amount);
+
+		<release the resource>
+	}
+
+    In order to keep the usage value self-consistent, both the
+    "res_counter_ptr" and the "amount" in release_something() should be
+    the same as they were in the alloc_something() when the releasing
+    resource was allocated.
+
+ c. Provide the way to read res_counter values and set them (the cgroups
+    still can help with it).
+
+ c. Compile and run :)
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index af3b925..6c442d8 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -154,6 +154,11 @@ scaling_governor,		and by "echoing" the name of another
 				that some governors won't load - they only
 				work on some specific architectures or
 				processors.
+
+cpuinfo_cur_freq :		Current speed of the CPU, in KHz.
+
+scaling_available_frequencies : List of available frequencies, in KHz.
+
 scaling_min_freq and
 scaling_max_freq		show the current "policy limits" (in
 				kHz). By echoing new values into these
@@ -162,6 +167,15 @@ scaling_max_freq		show the current "policy limits" (in
 				first set scaling_max_freq, then
 				scaling_min_freq.
 
+affected_cpus :			List of CPUs that require software coordination
+				of frequency.
+
+related_cpus :			List of CPUs that need some sort of frequency
+				coordination, whether software or hardware.
+
+scaling_driver :		Hardware driver for cpufreq.
+
+scaling_cur_freq :		Current frequency of the CPU, in KHz.
 
 If you have selected the "userspace" governor which allows you to
 set the CPU operating frequency to a specific value, you can read out
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index aa854b9..fb7b361 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -171,6 +171,7 @@ files describing that cpuset:
  - memory_migrate flag: if set, move pages to cpusets nodes
  - cpu_exclusive flag: is cpu placement exclusive?
  - mem_exclusive flag: is memory placement exclusive?
+ - mem_hardwall flag:  is memory allocation hardwalled
  - memory_pressure: measure of how much paging pressure in cpuset
 
 In addition, the root cpuset only has the following file:
@@ -222,17 +223,18 @@ If a cpuset is cpu or mem exclusive, no other cpuset, other than
 a direct ancestor or descendent, may share any of the same CPUs or
 Memory Nodes.
 
-A cpuset that is mem_exclusive restricts kernel allocations for
-page, buffer and other data commonly shared by the kernel across
-multiple users.  All cpusets, whether mem_exclusive or not, restrict
-allocations of memory for user space.  This enables configuring a
-system so that several independent jobs can share common kernel data,
-such as file system pages, while isolating each jobs user allocation in
-its own cpuset.  To do this, construct a large mem_exclusive cpuset to
-hold all the jobs, and construct child, non-mem_exclusive cpusets for
-each individual job.  Only a small amount of typical kernel memory,
-such as requests from interrupt handlers, is allowed to be taken
-outside even a mem_exclusive cpuset.
+A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled",
+i.e. it restricts kernel allocations for page, buffer and other data
+commonly shared by the kernel across multiple users.  All cpusets,
+whether hardwalled or not, restrict allocations of memory for user
+space.  This enables configuring a system so that several independent
+jobs can share common kernel data, such as file system pages, while
+isolating each job's user allocation in its own cpuset.  To do this,
+construct a large mem_exclusive cpuset to hold all the jobs, and
+construct child, non-mem_exclusive cpusets for each individual job.
+Only a small amount of typical kernel memory, such as requests from
+interrupt handlers, is allowed to be taken outside even a
+mem_exclusive cpuset.
 
 
 1.5 What is memory_pressure ?
@@ -707,7 +709,7 @@ Now you want to do something with this cpuset.
 
 In this directory you can find several files:
 # ls
-cpus  cpu_exclusive  mems  mem_exclusive  tasks
+cpus  cpu_exclusive  mems  mem_exclusive mem_hardwall  tasks
 
 Reading them will give you information about the state of this cpuset:
 the CPUs and Memory Nodes it can use, the processes that are using
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 599fe55..3c35d45 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -138,6 +138,24 @@ Who:	Kay Sievers <kay.sievers@suse.de>
 
 ---------------------------
 
+What:	find_task_by_pid
+When:	2.6.26
+Why:	With pid namespaces, calling this funciton will return the
+	wrong task when called from inside a namespace.
+
+	The best way to save a task pid and find a task by this
+	pid later, is to find this task's struct pid pointer (or get
+	it directly from the task) and call pid_task() later.
+
+	If someone really needs to get a task by its pid_t, then
+	he most likely needs the find_task_by_vpid() to get the
+	task from the same namespace as the current task is in, but
+	this may be not so in general.
+
+Who:	Pavel Emelyanov <xemul@openvz.org>
+
+---------------------------
+
 What:	ACPI procfs interface
 When:	July 2008
 Why:	ACPI sysfs conversion should be finished by January 2008.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 2a99116..dbc3c6a 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -463,11 +463,17 @@ SwapTotal:           0 kB
 SwapFree:            0 kB
 Dirty:             968 kB
 Writeback:           0 kB
+AnonPages:      861800 kB
 Mapped:         280372 kB
-Slab:           684068 kB
+Slab:           284364 kB
+SReclaimable:   159856 kB
+SUnreclaim:     124508 kB
+PageTables:      24448 kB
+NFS_Unstable:        0 kB
+Bounce:              0 kB
+WritebackTmp:        0 kB
 CommitLimit:   7669796 kB
 Committed_AS:   100056 kB
-PageTables:      24448 kB
 VmallocTotal:   112216 kB
 VmallocUsed:       428 kB
 VmallocChunk:   111088 kB
@@ -503,8 +509,17 @@ VmallocChunk:   111088 kB
               on the disk
        Dirty: Memory which is waiting to get written back to the disk
    Writeback: Memory which is actively being written back to the disk
+   AnonPages: Non-file backed pages mapped into userspace page tables
       Mapped: files which have been mmaped, such as libraries
         Slab: in-kernel data structures cache
+SReclaimable: Part of Slab, that might be reclaimed, such as caches
+  SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure
+  PageTables: amount of memory dedicated to the lowest level of page
+              tables.
+NFS_Unstable: NFS pages sent to the server, but not yet committed to stable
+	      storage
+      Bounce: Memory used for block device "bounce buffers"
+WritebackTmp: Memory used by FUSE for temporary writeback buffers
  CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
               this is the total amount of  memory currently available to
               be allocated on the system. This limit is only adhered to
@@ -531,8 +546,6 @@ Committed_AS: The amount of memory presently allocated on the system.
               above) will not be permitted. This is useful if one needs
               to guarantee that processes will not fail due to lack of
               memory once that memory has been successfully allocated.
-  PageTables: amount of memory dedicated to the lowest level of page
-              tables.
 VmallocTotal: total size of vmalloc memory area
  VmallocUsed: amount of vmalloc area which is used
 VmallocChunk: largest contigious block of vmalloc area which is free
diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts
index 1841ced..bd1fa9d 100644
--- a/Documentation/hwmon/w83l785ts
+++ b/Documentation/hwmon/w83l785ts
@@ -33,7 +33,8 @@ Known Issues
 ------------
 
 On some systems (Asus), the BIOS is known to interfere with the driver
-and cause read errors. The driver will retry a given number of times
+and cause read errors. Or maybe the W83L785TS-S chip is simply unreliable,
+we don't really know. The driver will retry a given number of times
 (5 by default) and then give up, returning the old value (or 0 if
 there is no old value). It seems to work well enough so that you should
 not notice anything. Thanks to James Bolt for helping test this feature.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index bfb0a55..ee75cba 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -164,7 +164,8 @@ I2C device drivers using this binding model work just like any other
 kind of driver in Linux:  they provide a probe() method to bind to
 those devices, and a remove() method to unbind.
 
-	static int foo_probe(struct i2c_client *client);
+	static int foo_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id);
 	static int foo_remove(struct i2c_client *client);
 
 Remember that the i2c_driver does not create those client handles.  The
diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt
index 0fac346..95ad15c 100644
--- a/Documentation/i386/boot.txt
+++ b/Documentation/i386/boot.txt
@@ -40,9 +40,17 @@ Protocol 2.05:	(Kernel 2.6.20) Make protected mode kernel relocatable.
 		Introduce relocatable_kernel and kernel_alignment fields.
 
 Protocol 2.06:	(Kernel 2.6.22) Added a field that contains the size of
-		the boot command line
+		the boot command line.
 
-Protocol 2.09:	(kernel 2.6.26) Added a field of 64-bit physical
+Protocol 2.07:	(Kernel 2.6.24) Added paravirtualised boot protocol.
+		Introduced hardware_subarch and hardware_subarch_data
+		and KEEP_SEGMENTS flag in load_flags.
+
+Protocol 2.08:	(Kernel 2.6.26) Added crc32 checksum and ELF format
+		payload. Introduced payload_offset and payload length
+		fields to aid in locating the payload.
+
+Protocol 2.09:	(Kernel 2.6.26) Added a field of 64-bit physical
 		pointer to single linked list of struct	setup_data.
 
 **** MEMORY LAYOUT
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 00b950d..c412c24 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -377,27 +377,3 @@ config FOO
 
 limits FOO to module (=m) or disabled (=n).
 
-
-Build limited by a third config symbol which may be =y or =m
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-A common idiom that we see (and sometimes have problems with) is this:
-
-When option C in B (module or subsystem) uses interfaces from A (module
-or subsystem), and both A and B are tristate (could be =y or =m if they
-were independent of each other, but they aren't), then we need to limit
-C such that it cannot be built statically if A is built as a loadable
-module.  (C already depends on B, so there is no dependency issue to
-take care of here.)
-
-If A is linked statically into the kernel image, C can be built
-statically or as loadable module(s).  However, if A is built as loadable
-module(s), then C must be restricted to loadable module(s) also.  This
-can be expressed in kconfig language as:
-
-config C
-	depends on A = y || A = B
-
-or for real examples, use this command in a kernel tree:
-
-$ find . -name Kconfig\* | xargs grep -ns "depends on.*=.*||.*=" | grep -v orig
-
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index d0ac72c..b8e52c0 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -245,6 +245,8 @@ The syntax is:
     crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
     range=start-[end]
 
+    'start' is inclusive and 'end' is exclusive.
+
 For example:
 
     crashkernel=512M-2G:64M,2G-:128M
@@ -253,10 +255,11 @@ This would mean:
 
     1) if the RAM is smaller than 512M, then don't reserve anything
        (this is the "rescue" case)
-    2) if the RAM size is between 512M and 2G, then reserve 64M
+    2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
     3) if the RAM size is larger than 2G, then reserve 128M
 
 
+
 Boot into System Kernel
 =======================
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e5f3d91..a3c3544 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -496,6 +496,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			switching to the matching ttyS device later.  The
 			options are the same as for ttyS, above.
 
+                If the device connected to the port is not a TTY but a braille
+                device, prepend "brl," before the device type, for instance
+			console=brl,ttyS0
+		For now, only VisioBraille is supported.
+
 	earlycon=	[KNL] Output early console device and options.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
@@ -556,6 +561,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			1 will print _a lot_ more information - normally
 			only useful to kernel developers.
 
+	debug_objects	[KNL] Enable object debugging
+
 	decnet.addr=	[HW,NET]
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
@@ -627,8 +634,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	eata=		[HW,SCSI]
 
 	edd=		[EDD]
-			Format: {"of[f]" | "sk[ipmbr]"}
-			See comment in arch/i386/boot/edd.S
+			Format: {"off" | "on" | "skip[mbr]"}
 
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
@@ -1389,6 +1395,13 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.
 
+	olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
+			Rather than timing out after 20 ms if an EC
+			command is not properly ACKed, override the length
+			of the timeout.  We have interrupts disabled while
+			waiting for the ACK, so if this is set too high
+			interrupts *may* be lost!
+
 	opl3=		[HW,OSS]
 			Format: <io>
 
diff --git a/Documentation/keys-request-key.txt b/Documentation/keys-request-key.txt
index 266955d..09b55e4 100644
--- a/Documentation/keys-request-key.txt
+++ b/Documentation/keys-request-key.txt
@@ -11,26 +11,29 @@ request_key*():
 
 	struct key *request_key(const struct key_type *type,
 				const char *description,
-				const char *callout_string);
+				const char *callout_info);
 
 or:
 
 	struct key *request_key_with_auxdata(const struct key_type *type,
 					     const char *description,
-					     const char *callout_string,
+					     const char *callout_info,
+					     size_t callout_len,
 					     void *aux);
 
 or:
 
 	struct key *request_key_async(const struct key_type *type,
 				      const char *description,
-				      const char *callout_string);
+				      const char *callout_info,
+				      size_t callout_len);
 
 or:
 
 	struct key *request_key_async_with_auxdata(const struct key_type *type,
 						   const char *description,
-						   const char *callout_string,
+						   const char *callout_info,
+					     	   size_t callout_len,
 						   void *aux);
 
 Or by userspace invoking the request_key system call:
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index 51652d3..d5c7a57d 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -170,7 +170,8 @@ The key service provides a number of features besides keys:
      amount of description and payload space that can be consumed.
 
      The user can view information on this and other statistics through procfs
-     files.
+     files.  The root user may also alter the quota limits through sysctl files
+     (see the section "New procfs files").
 
      Process-specific and thread-specific keyrings are not counted towards a
      user's quota.
@@ -329,6 +330,27 @@ about the status of the key service:
 	<bytes>/<max>		Key size quota
 
 
+Four new sysctl files have been added also for the purpose of controlling the
+quota limits on keys:
+
+ (*) /proc/sys/kernel/keys/root_maxkeys
+     /proc/sys/kernel/keys/root_maxbytes
+
+     These files hold the maximum number of keys that root may have and the
+     maximum total number of bytes of data that root may have stored in those
+     keys.
+
+ (*) /proc/sys/kernel/keys/maxkeys
+     /proc/sys/kernel/keys/maxbytes
+
+     These files hold the maximum number of keys that each non-root user may
+     have and the maximum total number of bytes of data that each of those
+     users may have stored in their keys.
+
+Root may alter these by writing each new limit as a decimal number string to
+the appropriate file.
+
+
 ===============================
 USERSPACE SYSTEM CALL INTERFACE
 ===============================
@@ -711,6 +733,27 @@ The keyctl syscall functions are:
      The assumed authoritative key is inherited across fork and exec.
 
 
+ (*) Get the LSM security context attached to a key.
+
+	long keyctl(KEYCTL_GET_SECURITY, key_serial_t key, char *buffer,
+		    size_t buflen)
+
+     This function returns a string that represents the LSM security context
+     attached to a key in the buffer provided.
+
+     Unless there's an error, it always returns the amount of data it could
+     produce, even if that's too big for the buffer, but it won't copy more
+     than requested to userspace. If the buffer pointer is NULL then no copy
+     will take place.
+
+     A NUL character is included at the end of the string if the buffer is
+     sufficiently big.  This is included in the returned count.  If no LSM is
+     in force then an empty string will be returned.
+
+     A process must have view permission on the key for this function to be
+     successful.
+
+
 ===============
 KERNEL SERVICES
 ===============
@@ -771,7 +814,7 @@ payload contents" for more information.
 
 	struct key *request_key(const struct key_type *type,
 				const char *description,
-				const char *callout_string);
+				const char *callout_info);
 
     This is used to request a key or keyring with a description that matches
     the description specified according to the key type's match function. This
@@ -793,24 +836,28 @@ payload contents" for more information.
 
 	struct key *request_key_with_auxdata(const struct key_type *type,
 					     const char *description,
-					     const char *callout_string,
+					     const void *callout_info,
+					     size_t callout_len,
 					     void *aux);
 
     This is identical to request_key(), except that the auxiliary data is
-    passed to the key_type->request_key() op if it exists.
+    passed to the key_type->request_key() op if it exists, and the callout_info
+    is a blob of length callout_len, if given (the length may be 0).
 
 
 (*) A key can be requested asynchronously by calling one of:
 
 	struct key *request_key_async(const struct key_type *type,
 				      const char *description,
-				      const char *callout_string);
+				      const void *callout_info,
+				      size_t callout_len);
 
     or:
 
 	struct key *request_key_async_with_auxdata(const struct key_type *type,
 						   const char *description,
-						   const char *callout_string,
+						   const char *callout_info,
+					     	   size_t callout_len,
 					     	   void *aux);
 
     which are asynchronous equivalents of request_key() and
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 76cb428..01c6c3d 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.19
-                         January 06th, 2008
+                            Version 0.20
+                          April 09th, 2008
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -18,6 +18,11 @@ This driver used to be named ibm-acpi until kernel 2.6.21 and release
 moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
 2.6.22, and release 0.14.
 
+The driver is named "thinkpad-acpi".  In some places, like module
+names, "thinkpad_acpi" is used because of userspace issues.
+
+"tpacpi" is used as a shorthand where "thinkpad-acpi" would be too
+long due to length limitations on some Linux kernel versions.
 
 Status
 ------
@@ -571,6 +576,47 @@ netlink interface and the input layer interface, and don't bother at all
 with hotkey_report_mode.
 
 
+Brightness hotkey notes:
+
+These are the current sane choices for brightness key mapping in
+thinkpad-acpi:
+
+For IBM and Lenovo models *without* ACPI backlight control (the ones on
+which thinkpad-acpi will autoload its backlight interface by default,
+and on which ACPI video does not export a backlight interface):
+
+1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as
+   these older firmware versions unfortunately won't respect the hotkey
+   mask for brightness keys anyway, and always reacts to them.  This
+   usually work fine, unless X.org drivers are doing something to block
+   the BIOS.  In that case, use (3) below.  This is the default mode of
+   operation.
+
+2. Enable the hotkeys, but map them to something else that is NOT
+   KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause
+   userspace to try to change the backlight level, and use that as an
+   on-screen-display hint.
+
+3. IF AND ONLY IF X.org drivers find a way to block the firmware from
+   automatically changing the brightness, enable the hotkeys and map
+   them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to
+   something that calls xbacklight.  thinkpad-acpi will not be able to
+   change brightness in that case either, so you should disable its
+   backlight interface.
+
+For Lenovo models *with* ACPI backlight control:
+
+1. Load up ACPI video and use that.  ACPI video will report ACPI
+   events for brightness change keys.  Do not mess with thinkpad-acpi
+   defaults in this case.  thinkpad-acpi should not have anything to do
+   with backlight events in a scenario where ACPI video is loaded:
+   brightness hotkeys must be disabled, and the backlight interface is
+   to be kept disabled as well.  This is the default mode of operation.
+
+2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
+   and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN.  Process
+   these keys on userspace somehow (e.g. by calling xbacklight).
+
 Bluetooth
 ---------
 
@@ -647,16 +693,31 @@ while others are still having problems. For more information:
 
 https://bugs.freedesktop.org/show_bug.cgi?id=2000
 
-ThinkLight control -- /proc/acpi/ibm/light
-------------------------------------------
+ThinkLight control
+------------------
+
+procfs: /proc/acpi/ibm/light
+sysfs attributes: as per LED class, for the "tpacpi::thinklight" LED
 
-The current status of the ThinkLight can be found in this file. A few
-models which do not make the status available will show it as
-"unknown". The available commands are:
+procfs notes:
+
+The ThinkLight status can be read and set through the procfs interface.  A
+few models which do not make the status available will show the ThinkLight
+status as "unknown". The available commands are:
 
 	echo on  > /proc/acpi/ibm/light
 	echo off > /proc/acpi/ibm/light
 
+sysfs notes:
+
+The ThinkLight sysfs interface is documented by the LED class
+documentation, in Documentation/leds-class.txt.  The ThinkLight LED name
+is "tpacpi::thinklight".
+
+Due to limitations in the sysfs LED class, if the status of the thinklight
+cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
+It is impossible to know if the status returned through sysfs is valid.
+
 Docking / undocking -- /proc/acpi/ibm/dock
 ------------------------------------------
 
@@ -815,28 +876,63 @@ The cmos command interface is prone to firmware split-brain problems, as
 in newer ThinkPads it is just a compatibility layer.  Do not use it, it is
 exported just as a debug tool.
 
-LED control -- /proc/acpi/ibm/led
----------------------------------
+LED control
+-----------
+
+procfs: /proc/acpi/ibm/led
+sysfs attributes: as per LED class, see below for names
+
+Some of the LED indicators can be controlled through this feature.  On
+some older ThinkPad models, it is possible to query the status of the
+LED indicators as well.  Newer ThinkPads cannot query the real status
+of the LED indicators.
 
-Some of the LED indicators can be controlled through this feature. The
-available commands are:
+procfs notes:
+
+The available commands are:
 
-	echo '<led number> on' >/proc/acpi/ibm/led
-	echo '<led number> off' >/proc/acpi/ibm/led
-	echo '<led number> blink' >/proc/acpi/ibm/led
+	echo '<LED number> on' >/proc/acpi/ibm/led
+	echo '<LED number> off' >/proc/acpi/ibm/led
+	echo '<LED number> blink' >/proc/acpi/ibm/led
 
-The <led number> range is 0 to 7. The set of LEDs that can be
-controlled varies from model to model. Here is the mapping on the X40:
+The <LED number> range is 0 to 7. The set of LEDs that can be
+controlled varies from model to model. Here is the common ThinkPad
+mapping:
 
 	0 - power
 	1 - battery (orange)
 	2 - battery (green)
-	3 - UltraBase
+	3 - UltraBase/dock
 	4 - UltraBay
+	5 - UltraBase battery slot
+	6 - (unknown)
 	7 - standby
 
 All of the above can be turned on and off and can be made to blink.
 
+sysfs notes:
+
+The ThinkPad LED sysfs interface is described in detail by the LED class
+documentation, in Documentation/leds-class.txt.
+
+The leds are named (in LED ID order, from 0 to 7):
+"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
+"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
+"tpacpi::unknown_led", "tpacpi::standby".
+
+Due to limitations in the sysfs LED class, if the status of the LED
+indicators cannot be read due to an error, thinkpad-acpi will report it as
+a brightness of zero (same as LED off).
+
+If the thinkpad firmware doesn't support reading the current status,
+trying to read the current LED brightness will just return whatever
+brightness was last written to that attribute.
+
+These LEDs can blink using hardware acceleration.  To request that a
+ThinkPad indicator LED should blink in hardware accelerated mode, use the
+"timer" trigger, and leave the delay_on and delay_off parameters set to
+zero (to request hardware acceleration autodetection).
+
 ACPI sounds -- /proc/acpi/ibm/beep
 ----------------------------------
 
@@ -1090,6 +1186,15 @@ it there will be the following attributes:
 		dim the display.
 
 
+WARNING:
+
+    Whatever you do, do NOT ever call thinkpad-acpi backlight-level change
+    interface and the ACPI-based backlight level change interface
+    (available on newer BIOSes, and driven by the Linux ACPI video driver)
+    at the same time.  The two will interact in bad ways, do funny things,
+    and maybe reduce the life of the backlight lamps by needlessly kicking
+    its level up and down at every change.
+
 Volume control -- /proc/acpi/ibm/volume
 ---------------------------------------
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 4c1fc65..3be8ab2 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -131,6 +131,9 @@ struct device
 	/* Any queues attached to this device */
 	struct virtqueue *vq;
 
+	/* Handle status being finalized (ie. feature bits stable). */
+	void (*ready)(struct device *me);
+
 	/* Device-specific data. */
 	void *priv;
 };
@@ -925,24 +928,40 @@ static void enable_fd(int fd, struct virtqueue *vq)
 	write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
 }
 
-/* When the Guest asks us to reset a device, it's is fairly easy. */
-static void reset_device(struct device *dev)
+/* When the Guest tells us they updated the status field, we handle it. */
+static void update_device_status(struct device *dev)
 {
 	struct virtqueue *vq;
 
-	verbose("Resetting device %s\n", dev->name);
-	/* Clear the status. */
-	dev->desc->status = 0;
+	/* This is a reset. */
+	if (dev->desc->status == 0) {
+		verbose("Resetting device %s\n", dev->name);
 
-	/* Clear any features they've acked. */
-	memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
-	       dev->desc->feature_len);
+		/* Clear any features they've acked. */
+		memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
+		       dev->desc->feature_len);
 
-	/* Zero out the virtqueues. */
-	for (vq = dev->vq; vq; vq = vq->next) {
-		memset(vq->vring.desc, 0,
-		       vring_size(vq->config.num, getpagesize()));
-		vq->last_avail_idx = 0;
+		/* Zero out the virtqueues. */
+		for (vq = dev->vq; vq; vq = vq->next) {
+			memset(vq->vring.desc, 0,
+			       vring_size(vq->config.num, getpagesize()));
+			vq->last_avail_idx = 0;
+		}
+	} else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+		warnx("Device %s configuration FAILED", dev->name);
+	} else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
+		unsigned int i;
+
+		verbose("Device %s OK: offered", dev->name);
+		for (i = 0; i < dev->desc->feature_len; i++)
+			verbose(" %08x", get_feature_bits(dev)[i]);
+		verbose(", accepted");
+		for (i = 0; i < dev->desc->feature_len; i++)
+			verbose(" %08x", get_feature_bits(dev)
+				[dev->desc->feature_len+i]);
+
+		if (dev->ready)
+			dev->ready(dev);
 	}
 }
 
@@ -954,9 +973,9 @@ static void handle_output(int fd, unsigned long addr)
 
 	/* Check each device and virtqueue. */
 	for (i = devices.dev; i; i = i->next) {
-		/* Notifications to device descriptors reset the device. */
+		/* Notifications to device descriptors update device status. */
 		if (from_guest_phys(addr) == i->desc) {
-			reset_device(i);
+			update_device_status(i);
 			return;
 		}
 
@@ -1170,6 +1189,7 @@ static struct device *new_device(const char *name, u16 type, int fd,
 	dev->handle_input = handle_input;
 	dev->name = name;
 	dev->vq = NULL;
+	dev->ready = NULL;
 
 	/* Append to device list.  Prepending to a single-linked list is
 	 * easier, but the user expects the devices to be arranged on the bus
@@ -1398,7 +1418,7 @@ static bool service_io(struct device *dev)
 	struct vblk_info *vblk = dev->priv;
 	unsigned int head, out_num, in_num, wlen;
 	int ret;
-	struct virtio_blk_inhdr *in;
+	u8 *in;
 	struct virtio_blk_outhdr *out;
 	struct iovec iov[dev->vq->vring.num];
 	off64_t off;
@@ -1416,7 +1436,7 @@ static bool service_io(struct device *dev)
 		     head, out_num, in_num);
 
 	out = convert(&iov[0], struct virtio_blk_outhdr);
-	in = convert(&iov[out_num+in_num-1], struct virtio_blk_inhdr);
+	in = convert(&iov[out_num+in_num-1], u8);
 	off = out->sector * 512;
 
 	/* The block device implements "barriers", where the Guest indicates
@@ -1430,7 +1450,7 @@ static bool service_io(struct device *dev)
 	 * It'd be nice if we supported eject, for example, but we don't. */
 	if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
 		fprintf(stderr, "Scsi commands unsupported\n");
-		in->status = VIRTIO_BLK_S_UNSUPP;
+		*in = VIRTIO_BLK_S_UNSUPP;
 		wlen = sizeof(*in);
 	} else if (out->type & VIRTIO_BLK_T_OUT) {
 		/* Write */
@@ -1453,7 +1473,7 @@ static bool service_io(struct device *dev)
 			errx(1, "Write past end %llu+%u", off, ret);
 		}
 		wlen = sizeof(*in);
-		in->status = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
 	} else {
 		/* Read */
 
@@ -1466,10 +1486,10 @@ static bool service_io(struct device *dev)
 		verbose("READ from sector %llu: %i\n", out->sector, ret);
 		if (ret >= 0) {
 			wlen = sizeof(*in) + ret;
-			in->status = VIRTIO_BLK_S_OK;
+			*in = VIRTIO_BLK_S_OK;
 		} else {
 			wlen = sizeof(*in);
-			in->status = VIRTIO_BLK_S_IOERR;
+			*in = VIRTIO_BLK_S_IOERR;
 		}
 	}
 
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index 7f60dfe..b152e81 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -253,6 +253,10 @@ characters, each representing a particular tainted value.
 
   8: 'D' if the kernel has died recently, i.e. there was an OOPS or BUG.
 
+  9: 'A' if the ACPI table has been overridden.
+
+ 10: 'W' if a warning has previously been issued by the kernel.
+
 The primary reason for the 'Tainted: ' string is to tell kernel
 debuggers if this is a clean kernel or if anything unusual has
 occurred.  Tainting is permanent: even if an offending module is
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 91c81db..716fcc1 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,25 @@
+1 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Sumant Patro
+			Bo Yang
+
+2 Current Version : 00.00.03.20-RC1
+3 Older Version   : 00.00.03.16
+
+1. Rollback the sense info implementation
+	Sense buffer ptr data type in the ioctl path is reverted back
+	to u32 * as in previous versions of driver.
+
+2. Fixed the driver frame count.
+	When Driver sent wrong frame count to firmware.  As this
+	particular command is sent to drive, FW is seeing continuous
+	chip resets and so the command will timeout.
+
+3. Add the new controller(1078DE) support to the driver
+	and Increase the max_wait to 60 from 10 in the controller
+	operational status.  With this max_wait increase, driver will
+	make sure the FW will 	finish the pending cmd for KDUMP case.
+
 1 Release Date    : Thur. Nov. 07 16:30:43 PST 2007 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Sumant Patro
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index fd4c32a..0bbee38 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -795,6 +795,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  lg-lw		LG LW20/LW25 laptop
 	  tcl		TCL S700
 	  clevo		Clevo laptops (m520G, m665n)
+	  medion	Medion Rim 2150
 	  test		for testing/debugging purpose, almost all controls can be
 			adjusted.  Appearing only when compiled with
 			$CONFIG_SND_DEBUG=y
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 10c8f69..5ce0952 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -85,6 +85,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'k'     - Secure Access Key (SAK) Kills all programs on the current virtual
           console. NOTE: See important comments below in SAK section.
 
+'l'     - Shows a stack backtrace for all active CPUs.
+
 'm'     - Will dump current memory info to your console.
 
 'n'	- Used to make RT tasks nice-able
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index d9f28be..70d68ce 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -108,10 +108,12 @@ and throttle appropriate devices.
 RO	read only value
 RW	read/write value
 
-All thermal sysfs attributes will be represented under /sys/class/thermal
+Thermal sysfs attributes will be represented under /sys/class/thermal.
+Hwmon sysfs I/F extension is also available under /sys/class/hwmon
+if hwmon is compiled in or built as a module.
 
 Thermal zone device sys I/F, created once it's registered:
-|thermal_zone[0-*]:
+/sys/class/thermal/thermal_zone[0-*]:
 	|-----type:			Type of the thermal zone
 	|-----temp:			Current temperature
 	|-----mode:			Working mode of the thermal zone
@@ -119,7 +121,7 @@ Thermal zone device sys I/F, created once it's registered:
 	|-----trip_point_[0-*]_type:	Trip point type
 
 Thermal cooling device sys I/F, created once it's registered:
-|cooling_device[0-*]:
+/sys/class/thermal/cooling_device[0-*]:
 	|-----type :			Type of the cooling device(processor/fan/...)
 	|-----max_state:		Maximum cooling state of the cooling device
 	|-----cur_state:		Current cooling state of the cooling device
@@ -130,10 +132,19 @@ They represent the relationship between a thermal zone and its associated coolin
 They are created/removed for each
 thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
 
-|thermal_zone[0-*]
+/sys/class/thermal/thermal_zone[0-*]
 	|-----cdev[0-*]:		The [0-*]th cooling device in the current thermal zone
 	|-----cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
 
+Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
+thermal zone device. E.g. the generic thermal driver registers one hwmon class device
+and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+/sys/class/hwmon/hwmon[0-*]:
+	|-----name:			The type of the thermal zone devices.
+	|-----temp[1-*]_input:		The current temperature of thermal zone [1-*].
+	|-----temp[1-*]_critical:	The critical trip point of thermal zone [1-*].
+Please read Documentation/hwmon/sysfs-interface for additional information.
 
 ***************************
 * Thermal zone attributes *
@@ -141,7 +152,10 @@ thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful e
 
 type				Strings which represent the thermal zone type.
 				This is given by thermal zone driver as part of registration.
-				Eg: "ACPI thermal zone" indicates it's a ACPI thermal device
+				Eg: "acpitz" indicates it's an ACPI thermal device.
+				In order to keep it consistent with hwmon sys attribute,
+				this should be a short, lowercase string,
+				not containing spaces nor dashes.
 				RO
 				Required
 
@@ -218,7 +232,7 @@ the sys I/F structure will be built like this:
 /sys/class/thermal:
 
 |thermal_zone1:
-	|-----type:			ACPI thermal zone
+	|-----type:			acpitz
 	|-----temp:			37000
 	|-----mode:			kernel
 	|-----trip_point_0_temp:	100000
@@ -243,3 +257,10 @@ the sys I/F structure will be built like this:
 	|-----type:			Fan
 	|-----max_state:		2
 	|-----cur_state:		0
+
+/sys/class/hwmon:
+
+|hwmon0:
+	|-----name:			acpitz
+	|-----temp1_input:		37000
+	|-----temp1_crit:		100000
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 44d84dd..67937df 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -128,7 +128,7 @@
 127 -> Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [0000:5071,0000:507B,5ace:5070,5ace:5090]
 128 -> Beholder BeholdTV Columbus TVFM          [0000:5201]
 129 -> Beholder BeholdTV 607 / BeholdTV 609     [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
-130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193]
+130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193,5ace:6191]
 131 -> Twinhan Hybrid DTV-DVB 3056 PCI          [1822:0022]
 132 -> Genius TVGO AM11MCE
 133 -> NXP Snake DVB-S reference design
@@ -140,3 +140,4 @@
 139 -> Compro VideoMate T750                    [185b:c900]
 140 -> Avermedia DVB-S Pro A700                 [1461:a7a1]
 141 -> Avermedia DVB-S Hybrid+FM A700           [1461:a7a2]
+142 -> Beholder BeholdTV H6                     [5ace:6290]
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
new file mode 100644
index 0000000..077d56e
--- /dev/null
+++ b/Documentation/video4linux/cx18.txt
@@ -0,0 +1,34 @@
+Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
+encoder chip:
+
+1) The only hardware currently supported is the Hauppauge HVR-1600.
+
+2) Some people have problems getting the i2c bus to work. Cause unknown.
+   The symptom is that the eeprom cannot be read and the card is
+   unusable.
+
+3) The audio from the analog tuner is mono only. Probably caused by
+   incorrect audio register information in the datasheet. We are
+   waiting for updated information from Conexant.
+
+4) VBI (raw or sliced) has not yet been implemented.
+
+5) MPEG indexing is not yet implemented.
+
+6) The driver is still a bit rough around the edges, this should
+   improve over time.
+
+
+Firmware:
+
+The firmware needs to be extracted from the Windows Hauppauge HVR-1600
+driver, available here:
+
+http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
+
+Unzip, then copy the following files to the firmware directory
+and rename them as follows:
+
+Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
+Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
+Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw
diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c
index d3ce295..e4230ed 100644
--- a/Documentation/vm/slabinfo.c
+++ b/Documentation/vm/slabinfo.c
@@ -38,7 +38,7 @@ struct slabinfo {
 	unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill;
 	unsigned long cpuslab_flush, deactivate_full, deactivate_empty;
 	unsigned long deactivate_to_head, deactivate_to_tail;
-	unsigned long deactivate_remote_frees;
+	unsigned long deactivate_remote_frees, order_fallback;
 	int numa[MAX_NODES];
 	int numa_partial[MAX_NODES];
 } slabinfo[MAX_SLABS];
@@ -293,7 +293,7 @@ int line = 0;
 void first_line(void)
 {
 	if (show_activity)
-		printf("Name                   Objects    Alloc     Free   %%Fast\n");
+		printf("Name                   Objects      Alloc       Free   %%Fast Fallb O\n");
 	else
 		printf("Name                   Objects Objsize    Space "
 			"Slabs/Part/Cpu  O/S O %%Fr %%Ef Flg\n");
@@ -573,11 +573,12 @@ void slabcache(struct slabinfo *s)
 		total_alloc = s->alloc_fastpath + s->alloc_slowpath;
 		total_free = s->free_fastpath + s->free_slowpath;
 
-		printf("%-21s %8ld %8ld %8ld %3ld %3ld \n",
+		printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n",
 			s->name, s->objects,
 			total_alloc, total_free,
 			total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0,
-			total_free ? (s->free_fastpath * 100 / total_free) : 0);
+			total_free ? (s->free_fastpath * 100 / total_free) : 0,
+			s->order_fallback, s->order);
 	}
 	else
 		printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
@@ -1188,6 +1189,7 @@ void read_slab_dir(void)
 			slab->deactivate_to_head = get_obj("deactivate_to_head");
 			slab->deactivate_to_tail = get_obj("deactivate_to_tail");
 			slab->deactivate_remote_frees = get_obj("deactivate_remote_frees");
+			slab->order_fallback = get_obj("order_fallback");
 			chdir("..");
 			if (slab->name[0] == ':')
 				alias_targets++;