Merge with mainline to remove plat-omap/Kconfig conflict

Conflicts:
	arch/arm/plat-omap/Kconfig

1 files changed, 220 insertions, 1 deletions

diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 1151ecd..fe0b743 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -3,6 +3,7 @@
  *  arch/sh/kernel/head.S
  *
  *  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ *  Copyright (C) 2010  Matt Fleming
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -13,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
+#include <asm/mmu.h>
+#include <cpu/mmu_context.h>
 
 #ifdef CONFIG_CPU_SH4A
 #define SYNCO()		synco
@@ -33,7 +36,7 @@ ENTRY(empty_zero_page)
 	.long	1		/* LOADER_TYPE */
 	.long	0x00000000	/* INITRD_START */
 	.long	0x00000000	/* INITRD_SIZE */
-#if defined(CONFIG_32BIT) && defined(CONFIG_PMB_FIXED)
+#ifdef CONFIG_32BIT
 	.long	0x53453f00 + 32	/* "SE?" = 32 bit */
 #else
 	.long	0x53453f00 + 29	/* "SE?" = 29 bit */
@@ -82,6 +85,209 @@ ENTRY(_stext)
 	ldc	r0, r7_bank	! ... and initial thread_info
 #endif
 
+#ifdef CONFIG_PMB
+/*
+ * Reconfigure the initial PMB mappings setup by the hardware.
+ *
+ * When we boot in 32-bit MMU mode there are 2 PMB entries already
+ * setup for us.
+ *
+ * Entry       VPN	   PPN	    V	SZ	C	UB	WT
+ * ---------------------------------------------------------------
+ *   0	    0x80000000 0x00000000   1  512MB	1	0	1
+ *   1	    0xA0000000 0x00000000   1  512MB	0	0	0
+ *
+ * But we reprogram them here because we want complete control over
+ * our address space and the initial mappings may not map PAGE_OFFSET
+ * to __MEMORY_START (or even map all of our RAM).
+ *
+ * Once we've setup cached and uncached mappings we clear the rest of the
+ * PMB entries. This clearing also deals with the fact that PMB entries
+ * can persist across reboots. The PMB could have been left in any state
+ * when the reboot occurred, so to be safe we clear all entries and start
+ * with with a clean slate.
+ *
+ * The uncached mapping is constructed using the smallest possible
+ * mapping with a single unbufferable page. Only the kernel text needs to
+ * be covered via the uncached mapping so that certain functions can be
+ * run uncached.
+ *
+ * Drivers and the like that have previously abused the 1:1 identity
+ * mapping are unsupported in 32-bit mode and must specify their caching
+ * preference when page tables are constructed.
+ *
+ * This frees up the P2 space for more nefarious purposes.
+ *
+ * Register utilization is as follows:
+ *
+ *	r0 = PMB_DATA data field
+ *	r1 = PMB_DATA address field
+ *	r2 = PMB_ADDR data field
+ *	r3 = PMB_ADDR address field
+ *	r4 = PMB_E_SHIFT
+ *	r5 = remaining amount of RAM to map
+ *	r6 = PMB mapping size we're trying to use
+ *	r7 = cached_to_uncached
+ *	r8 = scratch register
+ *	r9 = scratch register
+ *	r10 = number of PMB entries we've setup
+ */
+
+	mov.l	.LMMUCR, r1	/* Flush the TLB */
+	mov.l	@r1, r0
+	or	#MMUCR_TI, r0
+	mov.l	r0, @r1
+
+	mov.l	.LMEMORY_SIZE, r5
+
+	mov	#PMB_E_SHIFT, r0
+	mov	#0x1, r4
+	shld	r0, r4
+
+	mov.l	.LFIRST_DATA_ENTRY, r0
+	mov.l	.LPMB_DATA, r1
+	mov.l	.LFIRST_ADDR_ENTRY, r2
+	mov.l	.LPMB_ADDR, r3
+
+	/*
+	 * First we need to walk the PMB and figure out if there are any
+	 * existing mappings that match the initial mappings VPN/PPN.
+	 * If these have already been established by the bootloader, we
+	 * don't bother setting up new entries here, and let the late PMB
+	 * initialization take care of things instead.
+	 *
+	 * Note that we may need to coalesce and merge entries in order
+	 * to reclaim more available PMB slots, which is much more than
+	 * we want to do at this early stage.
+	 */
+	mov	#0, r10
+	mov	#NR_PMB_ENTRIES, r9
+
+	mov	r1, r7		/* temporary PMB_DATA iter */
+
+.Lvalidate_existing_mappings:
+
+	mov.l	@r7, r8
+	and	r0, r8
+	cmp/eq	r0, r8		/* Check for valid __MEMORY_START mappings */
+	bt	.Lpmb_done
+
+	add	#1, r10		/* Increment the loop counter */
+	cmp/eq	r9, r10
+	bf/s	.Lvalidate_existing_mappings
+	 add	r4, r7		/* Increment to the next PMB_DATA entry */
+
+	/*
+	 * If we've fallen through, continue with setting up the initial
+	 * mappings.
+	 */
+
+	mov	r5, r7		/* cached_to_uncached */
+	mov	#0, r10
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/*
+	 * Uncached mapping
+	 */
+	mov	#(PMB_SZ_16M >> 2), r9
+	shll2	r9
+
+	mov	#(PMB_UB >> 8), r8
+	shll8	r8
+
+	or	r0, r8
+	or	r9, r8
+	mov.l	r8, @r1
+	mov	r2, r8
+	add	r7, r8
+	mov.l	r8, @r3
+
+	add	r4, r1
+	add	r4, r3
+	add	#1, r10
+#endif
+
+/*
+ * Iterate over all of the available sizes from largest to
+ * smallest for constructing the cached mapping.
+ */
+#define __PMB_ITER_BY_SIZE(size)			\
+.L##size:						\
+	mov	#(size >> 4), r6;			\
+	shll16	r6;					\
+	shll8	r6;					\
+							\
+	cmp/hi	r5, r6;					\
+	bt	9999f;					\
+							\
+	mov	#(PMB_SZ_##size##M >> 2), r9;		\
+	shll2	r9;					\
+							\
+	/*						\
+	 * Cached mapping				\
+	 */						\
+	mov	#PMB_C, r8;				\
+	or	r0, r8;					\
+	or	r9, r8;					\
+	mov.l	r8, @r1;				\
+	mov.l	r2, @r3;				\
+							\
+	/* Increment to the next PMB_DATA entry */	\
+	add	r4, r1;					\
+	/* Increment to the next PMB_ADDR entry */	\
+	add	r4, r3;					\
+	/* Increment number of PMB entries */		\
+	add	#1, r10;				\
+							\
+	sub	r6, r5;					\
+	add	r6, r0;					\
+	add	r6, r2;					\
+							\
+	bra	.L##size;				\
+9999:
+
+	__PMB_ITER_BY_SIZE(512)
+	__PMB_ITER_BY_SIZE(128)
+	__PMB_ITER_BY_SIZE(64)
+	__PMB_ITER_BY_SIZE(16)
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/*
+	 * Now that we can access it, update cached_to_uncached and
+	 * uncached_size.
+	 */
+	mov.l	.Lcached_to_uncached, r0
+	mov.l	r7, @r0
+
+	mov.l	.Luncached_size, r0
+	mov	#1, r7
+	shll16	r7
+	shll8	r7
+	mov.l	r7, @r0
+#endif
+
+	/*
+	 * Clear the remaining PMB entries.
+	 *
+	 * r3 = entry to begin clearing from
+	 * r10 = number of entries we've setup so far
+	 */
+	mov	#0, r1
+	mov	#NR_PMB_ENTRIES, r0
+
+.Lagain:
+	mov.l	r1, @r3		/* Clear PMB_ADDR entry */
+	add	#1, r10		/* Increment the loop counter */
+	cmp/eq	r0, r10
+	bf/s	.Lagain
+	 add	r4, r3		/* Increment to the next PMB_ADDR entry */
+
+	mov.l	6f, r0
+	icbi	@r0
+
+.Lpmb_done:
+#endif /* CONFIG_PMB */
+
 #ifndef CONFIG_SH_NO_BSS_INIT
 	/*
 	 * Don't clear BSS if running on slow platforms such as an RTL simulation,
@@ -131,3 +337,16 @@ ENTRY(stack_start)
 5:	.long	start_kernel
 6:	.long	sh_cpu_init
 7:	.long	init_thread_union
+
+#ifdef CONFIG_PMB
+.LPMB_ADDR:		.long	PMB_ADDR
+.LPMB_DATA:		.long	PMB_DATA
+.LFIRST_ADDR_ENTRY:	.long	PAGE_OFFSET | PMB_V
+.LFIRST_DATA_ENTRY:	.long	__MEMORY_START | PMB_V
+.LMMUCR:		.long	MMUCR
+.LMEMORY_SIZE:		.long	__MEMORY_SIZE
+#ifdef CONFIG_UNCACHED_MAPPING
+.Lcached_to_uncached:	.long	cached_to_uncached
+.Luncached_size:	.long	uncached_size
+#endif
+#endif