Fix misc Kconfig typos

Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

14 files changed, 21 insertions, 21 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 57f23b4..e316bd9 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -133,7 +133,7 @@ config IXP4XX_INDIRECT_PCI
              into the kernel and we can use the standard read[bwl]/write[bwl]
              macros. This is the preferred method due to speed but it
              limits the system to just 64MB of PCI memory. This can be 
-             problamatic if using video cards and other memory-heavy devices.
+             problematic if using video cards and other memory-heavy devices.
           
           2) If > 64MB of memory space is required, the IXP4xx can be 
 	     configured to use indirect registers to access PCI This allows 
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
index 147b019..6f4c6a1 100644
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -8,7 +8,7 @@ config MACH_KEV7A400
 	help
 	  Say Y here if you are using the Sharp KEV7A400 development
 	  board.  This hardware is discontinued, so I'd be very
-	  suprised if you wanted this option.
+	  surprised if you wanted this option.
 
 config MACH_LPD7A400
 	bool "LPD7A400 Card Engine"
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63965c7..9aa26b9 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -91,7 +91,7 @@ config SMDK2440_CPU2442
 config MACH_S3C2413
 	bool
 	help
-	  Internal node for S3C2413 verison of SMDK2413, so that
+	  Internal node for S3C2413 version of SMDK2413, so that
 	  machine_is_s3c2413() will work when MACH_SMDK2413 is
 	  selected
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c0bfb82..b09a19f 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -197,7 +197,7 @@ config CPU_ARM940T
 	select CPU_CP15_MPU
 	help
 	  ARM940T is a member of the ARM9TDMI family of general-
-	  purpose microprocessors with MPU and seperate 4KB
+	  purpose microprocessors with MPU and separate 4KB
 	  instruction and 4KB data cases, each with a 4-word line
 	  length.
 
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 44eb1b9..c7ea9ef 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
 	depends on ETRAX_ARCH_V10
 	default "95a6"
 	help
-	  Waitstates for SRAM, Flash and peripherials (not DRAM).  95f8 is a
+	  Waitstates for SRAM, Flash and peripherals (not DRAM).  95f8 is a
 	  good choice for most Axis products...
 
 config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 734d5f3..e7e724bc 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
 	default "0"
 	help
 	  This controls the initial value of the trickle charge register.
-	  0 = disabled (use this if you are unsure or have a non rechargable battery)
+	  0 = disabled (use this if you are unsure or have a non rechargeable battery)
 	  Otherwise the following values can be OR:ed together to control the
 	  charge current:
 	  1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index a33097f..f64624f 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN
 	help
 	  Enables the DMA7 input channel for ser0 (ttyS0).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
@@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN
 	help
 	  Enables the DMA5 input channel for ser1 (ttyS1).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want this on, unless you use the DMA channel for
 	  something else.
 
@@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN
 	help
 	  Enables the DMA3 input channel for ser2 (ttyS2).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
@@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN
 	help
 	  Enables the DMA9 input channel for ser3 (ttyS3).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 6d920d4..c1bc22c 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -565,7 +565,7 @@ config ROMVEC
 	depends on ROM
 	help
 	  This is almost always the same as the base of the ROM. Since on all
-	  68000 type varients the vectors are at the base of the boot device
+	  68000 type variants the vectors are at the base of the boot device
 	  on system startup.
 
 config ROMVECSIZE
@@ -574,7 +574,7 @@ config ROMVECSIZE
 	depends on ROM
 	help
 	  Define the size of the vector region in ROM. For most 68000
-	  varients this would be 0x400 bytes in size. Set to 0 if you do
+	  variants this would be 0x400 bytes in size. Set to 0 if you do
 	  not want a vector region at the start of the ROM.
 
 config ROMSTART
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1443024..22bb540 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -865,7 +865,7 @@ config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
 #
-# Endianess selection.  Suffiently obscure so many users don't know what to
+# Endianess selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
 # choice statement should be more obvious to the user.
 #
@@ -874,7 +874,7 @@ choice
 	help
 	  Some MIPS machines can be configured for either little or big endian
 	  byte order. These modes require different kernels and a different
-	  Linux distribution.  In general there is one prefered byteorder for a
+	  Linux distribution.  In general there is one preferred byteorder for a
 	  particular system but some systems are just as commonly used in the
 	  one or the other endianess.
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0673dbe..116d7d3 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -425,7 +425,7 @@ config PPC_MAPLE
 	default n
 	help
           This option enables support for the Maple 970FX Evaluation Board.
-	  For more informations, refer to <http://www.970eval.com>
+	  For more information, refer to <http://www.970eval.com>
 
 config PPC_PASEMI
 	depends on PPC_MULTIPLATFORM && PPC64
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7edb6b4..edcd5b8 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -21,7 +21,7 @@ config MPC834x_SYS
 	  Be aware that PCI buses can only function when SYS board is plugged
 	  into the PIB (Platform IO Board) board from Freescale which provide
 	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
-	  responsiblilty.
+	  responsibility.
 
 config MPC834x_ITX
 	bool "Freescale MPC834x ITX"
@@ -30,7 +30,7 @@ config MPC834x_ITX
 	  This option enables support for the MPC 834x ITX evaluation board.
 
 	  Be aware that PCI initialization is the bootloader's
-	  responsiblilty.
+	  responsibility.
 
 config MPC8360E_PB
 	bool "Freescale MPC8360E PB"
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 077711e..ef018e2 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -724,7 +724,7 @@ config MPC834x_SYS
 	  Be aware that PCI buses can only function when SYS board is plugged
 	  into the PIB (Platform IO Board) board from Freescale which provide
 	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
-	  responsiblilty.
+	  responsibility.
 
 config EV64360
 	bool "Marvell-EV64360BP"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6a461d4..bffc7e1 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -217,7 +217,7 @@ config SH_SHMIN
 	bool "SHMIN"
 	select CPU_SUBTYPE_SH7706
 	help
-	  Select SHMIN if configureing for the SHMIN board
+	  Select SHMIN if configuring for the SHMIN board.
 
 config SH_UNKNOWN
 	bool "BareCPU"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 2f96610..92a7c8a 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -212,8 +212,8 @@ config SPARC_LED
 	tristate "Sun4m LED driver"
 	help
 	  This driver toggles the front-panel LED on sun4m systems
-	  in a user-specifyable manner.  It's state can be probed
-	  by reading /proc/led and it's blinking mode can be changed
+	  in a user-specifiable manner.  Its state can be probed
+	  by reading /proc/led and its blinking mode can be changed
 	  via writes to /proc/led
 
 source "fs/Kconfig.binfmt"