Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

6 files changed, 465 insertions, 288 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 6aab00e..11f467c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x0489, 0xe04e) },
 	{ USB_DEVICE(0x0489, 0xe056) },
+	{ USB_DEVICE(0x0489, 0xe04d) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
index 428dbb7..db2c3c3 100644
--- a/drivers/bluetooth/btmrvl_debugfs.c
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -29,20 +29,6 @@
 struct btmrvl_debugfs_data {
 	struct dentry *config_dir;
 	struct dentry *status_dir;
-
-	/* config */
-	struct dentry *psmode;
-	struct dentry *pscmd;
-	struct dentry *hsmode;
-	struct dentry *hscmd;
-	struct dentry *gpiogap;
-	struct dentry *hscfgcmd;
-
-	/* status */
-	struct dentry *curpsmode;
-	struct dentry *hsstate;
-	struct dentry *psstate;
-	struct dentry *txdnldready;
 };
 
 static ssize_t btmrvl_hscfgcmd_write(struct file *file,
@@ -91,47 +77,6 @@ static const struct file_operations btmrvl_hscfgcmd_fops = {
 	.llseek = default_llseek,
 };
 
-static ssize_t btmrvl_psmode_write(struct file *file, const char __user *ubuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	long result, ret;
-
-	memset(buf, 0, sizeof(buf));
-
-	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
-		return -EFAULT;
-
-	ret = strict_strtol(buf, 10, &result);
-	if (ret)
-		return ret;
-
-	priv->btmrvl_dev.psmode = result;
-
-	return count;
-}
-
-static ssize_t btmrvl_psmode_read(struct file *file, char __user *userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	int ret;
-
-	ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
-						priv->btmrvl_dev.psmode);
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
-}
-
-static const struct file_operations btmrvl_psmode_fops = {
-	.read	= btmrvl_psmode_read,
-	.write	= btmrvl_psmode_write,
-	.open	= simple_open,
-	.llseek = default_llseek,
-};
-
 static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf,
 						size_t count, loff_t *ppos)
 {
@@ -178,47 +123,6 @@ static const struct file_operations btmrvl_pscmd_fops = {
 	.llseek = default_llseek,
 };
 
-static ssize_t btmrvl_gpiogap_write(struct file *file, const char __user *ubuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	long result, ret;
-
-	memset(buf, 0, sizeof(buf));
-
-	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
-		return -EFAULT;
-
-	ret = strict_strtol(buf, 16, &result);
-	if (ret)
-		return ret;
-
-	priv->btmrvl_dev.gpio_gap = result;
-
-	return count;
-}
-
-static ssize_t btmrvl_gpiogap_read(struct file *file, char __user *userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	int ret;
-
-	ret = snprintf(buf, sizeof(buf) - 1, "0x%x\n",
-						priv->btmrvl_dev.gpio_gap);
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
-}
-
-static const struct file_operations btmrvl_gpiogap_fops = {
-	.read	= btmrvl_gpiogap_read,
-	.write	= btmrvl_gpiogap_write,
-	.open	= simple_open,
-	.llseek = default_llseek,
-};
-
 static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf,
 						size_t count, loff_t *ppos)
 {
@@ -263,119 +167,6 @@ static const struct file_operations btmrvl_hscmd_fops = {
 	.llseek = default_llseek,
 };
 
-static ssize_t btmrvl_hsmode_write(struct file *file, const char __user *ubuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	long result, ret;
-
-	memset(buf, 0, sizeof(buf));
-
-	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
-		return -EFAULT;
-
-	ret = strict_strtol(buf, 10, &result);
-	if (ret)
-		return ret;
-
-	priv->btmrvl_dev.hsmode = result;
-
-	return count;
-}
-
-static ssize_t btmrvl_hsmode_read(struct file *file, char __user * userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	int ret;
-
-	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.hsmode);
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
-}
-
-static const struct file_operations btmrvl_hsmode_fops = {
-	.read	= btmrvl_hsmode_read,
-	.write	= btmrvl_hsmode_write,
-	.open	= simple_open,
-	.llseek = default_llseek,
-};
-
-static ssize_t btmrvl_curpsmode_read(struct file *file, char __user *userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	int ret;
-
-	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->psmode);
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
-}
-
-static const struct file_operations btmrvl_curpsmode_fops = {
-	.read	= btmrvl_curpsmode_read,
-	.open	= simple_open,
-	.llseek = default_llseek,
-};
-
-static ssize_t btmrvl_psstate_read(struct file *file, char __user * userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	int ret;
-
-	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->ps_state);
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
-}
-
-static const struct file_operations btmrvl_psstate_fops = {
-	.read	= btmrvl_psstate_read,
-	.open	= simple_open,
-	.llseek = default_llseek,
-};
-
-static ssize_t btmrvl_hsstate_read(struct file *file, char __user *userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	int ret;
-
-	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->hs_state);
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
-}
-
-static const struct file_operations btmrvl_hsstate_fops = {
-	.read	= btmrvl_hsstate_read,
-	.open	= simple_open,
-	.llseek = default_llseek,
-};
-
-static ssize_t btmrvl_txdnldready_read(struct file *file, char __user *userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct btmrvl_private *priv = file->private_data;
-	char buf[16];
-	int ret;
-
-	ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
-					priv->btmrvl_dev.tx_dnld_rdy);
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
-}
-
-static const struct file_operations btmrvl_txdnldready_fops = {
-	.read	= btmrvl_txdnldready_read,
-	.open	= simple_open,
-	.llseek = default_llseek,
-};
-
 void btmrvl_debugfs_init(struct hci_dev *hdev)
 {
 	struct btmrvl_private *priv = hci_get_drvdata(hdev);
@@ -394,30 +185,28 @@ void btmrvl_debugfs_init(struct hci_dev *hdev)
 
 	dbg->config_dir = debugfs_create_dir("config", hdev->debugfs);
 
-	dbg->psmode = debugfs_create_file("psmode", 0644, dbg->config_dir,
-					  priv, &btmrvl_psmode_fops);
-	dbg->pscmd = debugfs_create_file("pscmd", 0644, dbg->config_dir,
-					 priv, &btmrvl_pscmd_fops);
-	dbg->gpiogap = debugfs_create_file("gpiogap", 0644, dbg->config_dir,
-					   priv, &btmrvl_gpiogap_fops);
-	dbg->hsmode =  debugfs_create_file("hsmode", 0644, dbg->config_dir,
-					   priv, &btmrvl_hsmode_fops);
-	dbg->hscmd = debugfs_create_file("hscmd", 0644, dbg->config_dir,
-					 priv, &btmrvl_hscmd_fops);
-	dbg->hscfgcmd = debugfs_create_file("hscfgcmd", 0644, dbg->config_dir,
-					    priv, &btmrvl_hscfgcmd_fops);
+	debugfs_create_u8("psmode", 0644, dbg->config_dir,
+			  &priv->btmrvl_dev.psmode);
+	debugfs_create_file("pscmd", 0644, dbg->config_dir,
+			    priv, &btmrvl_pscmd_fops);
+	debugfs_create_x16("gpiogap", 0644, dbg->config_dir,
+			   &priv->btmrvl_dev.gpio_gap);
+	debugfs_create_u8("hsmode", 0644, dbg->config_dir,
+			  &priv->btmrvl_dev.hsmode);
+	debugfs_create_file("hscmd", 0644, dbg->config_dir,
+			    priv, &btmrvl_hscmd_fops);
+	debugfs_create_file("hscfgcmd", 0644, dbg->config_dir,
+			    priv, &btmrvl_hscfgcmd_fops);
 
 	dbg->status_dir = debugfs_create_dir("status", hdev->debugfs);
-	dbg->curpsmode = debugfs_create_file("curpsmode", 0444,
-					     dbg->status_dir, priv,
-					     &btmrvl_curpsmode_fops);
-	dbg->psstate = debugfs_create_file("psstate", 0444, dbg->status_dir,
-					   priv, &btmrvl_psstate_fops);
-	dbg->hsstate = debugfs_create_file("hsstate", 0444, dbg->status_dir,
-					   priv, &btmrvl_hsstate_fops);
-	dbg->txdnldready = debugfs_create_file("txdnldready", 0444,
-					       dbg->status_dir, priv,
-					       &btmrvl_txdnldready_fops);
+	debugfs_create_u8("curpsmode", 0444, dbg->status_dir,
+			  &priv->adapter->psmode);
+	debugfs_create_u8("psstate", 0444, dbg->status_dir,
+			  &priv->adapter->ps_state);
+	debugfs_create_u8("hsstate", 0444, dbg->status_dir,
+			  &priv->adapter->hs_state);
+	debugfs_create_u8("txdnldready", 0444, dbg->status_dir,
+			  &priv->btmrvl_dev.tx_dnld_rdy);
 }
 
 void btmrvl_debugfs_remove(struct hci_dev *hdev)
@@ -428,19 +217,8 @@ void btmrvl_debugfs_remove(struct hci_dev *hdev)
 	if (!dbg)
 		return;
 
-	debugfs_remove(dbg->psmode);
-	debugfs_remove(dbg->pscmd);
-	debugfs_remove(dbg->gpiogap);
-	debugfs_remove(dbg->hsmode);
-	debugfs_remove(dbg->hscmd);
-	debugfs_remove(dbg->hscfgcmd);
-	debugfs_remove(dbg->config_dir);
-
-	debugfs_remove(dbg->curpsmode);
-	debugfs_remove(dbg->psstate);
-	debugfs_remove(dbg->hsstate);
-	debugfs_remove(dbg->txdnldready);
-	debugfs_remove(dbg->status_dir);
+	debugfs_remove_recursive(dbg->config_dir);
+	debugfs_remove_recursive(dbg->status_dir);
 
 	kfree(dbg);
 }
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 9959d4c..c63488c 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -83,8 +83,8 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
-	.helper		= "sd8688_helper.bin",
-	.firmware	= "sd8688.bin",
+	.helper		= "mrvl/sd8688_helper.bin",
+	.firmware	= "mrvl/sd8688.bin",
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
@@ -228,24 +228,24 @@ failed:
 static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card,
 								int pollnum)
 {
-	int ret = -ETIMEDOUT;
 	u16 firmwarestat;
-	unsigned int tries;
+	int tries, ret;
 
 	 /* Wait for firmware to become ready */
 	for (tries = 0; tries < pollnum; tries++) {
-		if (btmrvl_sdio_read_fw_status(card, &firmwarestat) < 0)
+		sdio_claim_host(card->func);
+		ret = btmrvl_sdio_read_fw_status(card, &firmwarestat);
+		sdio_release_host(card->func);
+		if (ret < 0)
 			continue;
 
-		if (firmwarestat == FIRMWARE_READY) {
-			ret = 0;
-			break;
-		} else {
-			msleep(10);
-		}
+		if (firmwarestat == FIRMWARE_READY)
+			return 0;
+
+		msleep(10);
 	}
 
-	return ret;
+	return -ETIMEDOUT;
 }
 
 static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
@@ -874,7 +874,7 @@ exit:
 
 static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
 {
-	int ret = 0;
+	int ret;
 	u8 fws0;
 	int pollnum = MAX_POLL_TRIES;
 
@@ -882,13 +882,14 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
 		BT_ERR("card or function is NULL!");
 		return -EINVAL;
 	}
-	sdio_claim_host(card->func);
 
 	if (!btmrvl_sdio_verify_fw_download(card, 1)) {
 		BT_DBG("Firmware already downloaded!");
-		goto done;
+		return 0;
 	}
 
+	sdio_claim_host(card->func);
+
 	/* Check if other function driver is downloading the firmware */
 	fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
 	if (ret) {
@@ -918,15 +919,21 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
 		}
 	}
 
+	sdio_release_host(card->func);
+
+	/*
+	 * winner or not, with this test the FW synchronizes when the
+	 * module can continue its initialization
+	 */
 	if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
 		BT_ERR("FW failed to be active in time!");
-		ret = -ETIMEDOUT;
-		goto done;
+		return -ETIMEDOUT;
 	}
 
+	return 0;
+
 done:
 	sdio_release_host(card->func);
-
 	return ret;
 }
 
@@ -989,8 +996,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 		goto unreg_dev;
 	}
 
-	msleep(100);
-
 	btmrvl_sdio_enable_host_int(card);
 
 	priv = btmrvl_add_card(card);
@@ -1185,7 +1190,7 @@ MODULE_AUTHOR("Marvell International Ltd.");
 MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL v2");
-MODULE_FIRMWARE("sd8688_helper.bin");
-MODULE_FIRMWARE("sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
+MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2cc5f77..7a7e5f8 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -23,6 +23,7 @@
 
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/firmware.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -47,6 +48,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_BROKEN_ISOC	0x20
 #define BTUSB_WRONG_SCO_MTU	0x40
 #define BTUSB_ATH3012		0x80
+#define BTUSB_INTEL		0x100
 
 static struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -148,6 +150,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -206,6 +209,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Frontline ComProbe Bluetooth Sniffer */
 	{ USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER },
 
+	/* Intel Bluetooth device */
+	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
+
 	{ }	/* Terminating entry */
 };
 
@@ -926,6 +932,391 @@ static void btusb_waker(struct work_struct *work)
 	usb_autopm_put_interface(data->intf);
 }
 
+static int btusb_setup_bcm92035(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	u8 val = 0x00;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
+	else
+		kfree_skb(skb);
+
+	return 0;
+}
+
+struct intel_version {
+	u8 status;
+	u8 hw_platform;
+	u8 hw_variant;
+	u8 hw_revision;
+	u8 fw_variant;
+	u8 fw_revision;
+	u8 fw_build_num;
+	u8 fw_build_ww;
+	u8 fw_build_yy;
+	u8 fw_patch_num;
+} __packed;
+
+static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
+						struct intel_version *ver)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int ret;
+
+	snprintf(fwname, sizeof(fwname),
+		 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
+		 ver->hw_platform, ver->hw_variant, ver->hw_revision,
+		 ver->fw_variant,  ver->fw_revision, ver->fw_build_num,
+		 ver->fw_build_ww, ver->fw_build_yy);
+
+	ret = request_firmware(&fw, fwname, &hdev->dev);
+	if (ret < 0) {
+		if (ret == -EINVAL) {
+			BT_ERR("%s Intel firmware file request failed (%d)",
+			       hdev->name, ret);
+			return NULL;
+		}
+
+		BT_ERR("%s failed to open Intel firmware file: %s(%d)",
+		       hdev->name, fwname, ret);
+
+		/* If the correct firmware patch file is not found, use the
+		 * default firmware patch file instead
+		 */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
+			 ver->hw_platform, ver->hw_variant);
+		if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
+			BT_ERR("%s failed to open default Intel fw file: %s",
+			       hdev->name, fwname);
+			return NULL;
+		}
+	}
+
+	BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
+
+	return fw;
+}
+
+static int btusb_setup_intel_patching(struct hci_dev *hdev,
+				      const struct firmware *fw,
+				      const u8 **fw_ptr, int *disable_patch)
+{
+	struct sk_buff *skb;
+	struct hci_command_hdr *cmd;
+	const u8 *cmd_param;
+	struct hci_event_hdr *evt = NULL;
+	const u8 *evt_param = NULL;
+	int remain = fw->size - (*fw_ptr - fw->data);
+
+	/* The first byte indicates the types of the patch command or event.
+	 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
+	 * in the current firmware buffer doesn't start with 0x01 or
+	 * the size of remain buffer is smaller than HCI command header,
+	 * the firmware file is corrupted and it should stop the patching
+	 * process.
+	 */
+	if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
+		BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
+		return -EINVAL;
+	}
+	(*fw_ptr)++;
+	remain--;
+
+	cmd = (struct hci_command_hdr *)(*fw_ptr);
+	*fw_ptr += sizeof(*cmd);
+	remain -= sizeof(*cmd);
+
+	/* Ensure that the remain firmware data is long enough than the length
+	 * of command parameter. If not, the firmware file is corrupted.
+	 */
+	if (remain < cmd->plen) {
+		BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
+		return -EFAULT;
+	}
+
+	/* If there is a command that loads a patch in the firmware
+	 * file, then enable the patch upon success, otherwise just
+	 * disable the manufacturer mode, for example patch activation
+	 * is not required when the default firmware patch file is used
+	 * because there are no patch data to load.
+	 */
+	if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
+		*disable_patch = 0;
+
+	cmd_param = *fw_ptr;
+	*fw_ptr += cmd->plen;
+	remain -= cmd->plen;
+
+	/* This reads the expected events when the above command is sent to the
+	 * device. Some vendor commands expects more than one events, for
+	 * example command status event followed by vendor specific event.
+	 * For this case, it only keeps the last expected event. so the command
+	 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
+	 * last expected event.
+	 */
+	while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
+		(*fw_ptr)++;
+		remain--;
+
+		evt = (struct hci_event_hdr *)(*fw_ptr);
+		*fw_ptr += sizeof(*evt);
+		remain -= sizeof(*evt);
+
+		if (remain < evt->plen) {
+			BT_ERR("%s Intel fw corrupted: invalid evt len",
+			       hdev->name);
+			return -EFAULT;
+		}
+
+		evt_param = *fw_ptr;
+		*fw_ptr += evt->plen;
+		remain -= evt->plen;
+	}
+
+	/* Every HCI commands in the firmware file has its correspond event.
+	 * If event is not found or remain is smaller than zero, the firmware
+	 * file is corrupted.
+	 */
+	if (!evt || !evt_param || remain < 0) {
+		BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
+		return -EFAULT;
+	}
+
+	skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
+				cmd_param, evt->evt, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
+		       hdev->name, cmd->opcode, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+
+	/* It ensures that the returned event matches the event data read from
+	 * the firmware file. At fist, it checks the length and then
+	 * the contents of the event.
+	 */
+	if (skb->len != evt->plen) {
+		BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
+		       le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+
+	if (memcmp(skb->data, evt_param, evt->plen)) {
+		BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
+		       hdev->name, le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int btusb_setup_intel(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	int disable_patch;
+	struct intel_version *ver;
+
+	const u8 mfg_enable[] = { 0x01, 0x00 };
+	const u8 mfg_disable[] = { 0x00, 0x00 };
+	const u8 mfg_reset_deactivate[] = { 0x00, 0x01 };
+	const u8 mfg_reset_activate[] = { 0x00, 0x02 };
+
+	BT_DBG("%s", hdev->name);
+
+	/* The controller has a bug with the first HCI command sent to it
+	 * returning number of completed commands as zero. This would stall the
+	 * command processing in the Bluetooth core.
+	 *
+	 * As a workaround, send HCI Reset command first which will reset the
+	 * number of completed commands and allow normal command processing
+	 * from now on.
+	 */
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s sending initial HCI reset command failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	/* Read Intel specific controller version first to allow selection of
+	 * which firmware file to load.
+	 *
+	 * The returned information are hardware variant and revision plus
+	 * firmware variant, revision and build number.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s reading Intel fw version command failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s Intel version event length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	ver = (struct intel_version *)skb->data;
+	if (ver->status) {
+		BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
+		       ver->status);
+		kfree_skb(skb);
+		return -bt_to_errno(ver->status);
+	}
+
+	BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
+		hdev->name, ver->hw_platform, ver->hw_variant,
+		ver->hw_revision, ver->fw_variant,  ver->fw_revision,
+		ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
+		ver->fw_patch_num);
+
+	/* fw_patch_num indicates the version of patch the device currently
+	 * have. If there is no patch data in the device, it is always 0x00.
+	 * So, if it is other than 0x00, no need to patch the deivce again.
+	 */
+	if (ver->fw_patch_num) {
+		BT_INFO("%s: Intel device is already patched. patch num: %02x",
+			hdev->name, ver->fw_patch_num);
+		kfree_skb(skb);
+		return 0;
+	}
+
+	/* Opens the firmware patch file based on the firmware version read
+	 * from the controller. If it fails to open the matching firmware
+	 * patch file, it tries to open the default firmware patch file.
+	 * If no patch file is found, allow the device to operate without
+	 * a patch.
+	 */
+	fw = btusb_setup_intel_get_fw(hdev, ver);
+	if (!fw) {
+		kfree_skb(skb);
+		return 0;
+	}
+	fw_ptr = fw->data;
+
+	/* This Intel specific command enables the manufacturer mode of the
+	 * controller.
+	 *
+	 * Only while this mode is enabled, the driver can download the
+	 * firmware patch data and configuration parameters.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		release_firmware(fw);
+		return -PTR_ERR(skb);
+	}
+
+	if (skb->data[0]) {
+		u8 evt_status = skb->data[0];
+		BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
+		       hdev->name, evt_status);
+		kfree_skb(skb);
+		release_firmware(fw);
+		return -bt_to_errno(evt_status);
+	}
+	kfree_skb(skb);
+
+	disable_patch = 1;
+
+	/* The firmware data file consists of list of Intel specific HCI
+	 * commands and its expected events. The first byte indicates the
+	 * type of the message, either HCI command or HCI event.
+	 *
+	 * It reads the command and its expected event from the firmware file,
+	 * and send to the controller. Once __hci_cmd_sync_ev() returns,
+	 * the returned event is compared with the event read from the firmware
+	 * file and it will continue until all the messages are downloaded to
+	 * the controller.
+	 *
+	 * Once the firmware patching is completed successfully,
+	 * the manufacturer mode is disabled with reset and activating the
+	 * downloaded patch.
+	 *
+	 * If the firmware patching fails, the manufacturer mode is
+	 * disabled with reset and deactivating the patch.
+	 *
+	 * If the default patch file is used, no reset is done when disabling
+	 * the manufacturer.
+	 */
+	while (fw->size > fw_ptr - fw->data) {
+		int ret;
+
+		ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
+						 &disable_patch);
+		if (ret < 0)
+			goto exit_mfg_deactivate;
+	}
+
+	release_firmware(fw);
+
+	if (disable_patch)
+		goto exit_mfg_disable;
+
+	/* Patching completed successfully and disable the manufacturer mode
+	 * with reset and activate the downloaded firmware patches.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate),
+			     mfg_reset_activate, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
+		hdev->name);
+
+	return 0;
+
+exit_mfg_disable:
+	/* Disable the manufacturer mode without reset */
+	skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
+	return 0;
+
+exit_mfg_deactivate:
+	release_firmware(fw);
+
+	/* Patching failed. Disable the manufacturer mode with reset and
+	 * deactivate the downloaded firmware patches.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate),
+			     mfg_reset_deactivate, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
+		hdev->name);
+
+	return 0;
+}
+
 static int btusb_probe(struct usb_interface *intf,
 				const struct usb_device_id *id)
 {
@@ -1022,11 +1413,17 @@ static int btusb_probe(struct usb_interface *intf,
 
 	SET_HCIDEV_DEV(hdev, &intf->dev);
 
-	hdev->open     = btusb_open;
-	hdev->close    = btusb_close;
-	hdev->flush    = btusb_flush;
-	hdev->send     = btusb_send_frame;
-	hdev->notify   = btusb_notify;
+	hdev->open   = btusb_open;
+	hdev->close  = btusb_close;
+	hdev->flush  = btusb_flush;
+	hdev->send   = btusb_send_frame;
+	hdev->notify = btusb_notify;
+
+	if (id->driver_info & BTUSB_BCM92035)
+		hdev->setup = btusb_setup_bcm92035;
+
+	if (id->driver_info & BTUSB_INTEL)
+		hdev->setup = btusb_setup_intel;
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1065,17 +1462,6 @@ static int btusb_probe(struct usb_interface *intf,
 		data->isoc = NULL;
 	}
 
-	if (id->driver_info & BTUSB_BCM92035) {
-		unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
-		struct sk_buff *skb;
-
-		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
-		if (skb) {
-			memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
-			skb_queue_tail(&hdev->driver_init, skb);
-		}
-	}
-
 	if (data->isoc) {
 		err = usb_driver_claim_interface(&btusb_driver,
 							data->isoc, data);
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index c60623f..8ae9f1e 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -153,6 +153,9 @@ static int h4_recv(struct hci_uart *hu, void *data, int count)
 {
 	int ret;
 
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
 	ret = hci_recv_stream_fragment(hu->hdev, data, count);
 	if (ret < 0) {
 		BT_ERR("Frame Reassembly Failed");
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index ed0fade..bc68a44 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -260,12 +260,12 @@ static int hci_uart_send_frame(struct sk_buff *skb)
 
 /* ------ LDISC part ------ */
 /* hci_uart_tty_open
- * 
+ *
  *     Called when line discipline changed to HCI_UART.
  *
  * Arguments:
  *     tty    pointer to tty info structure
- * Return Value:    
+ * Return Value:
  *     0 if success, otherwise error code
  */
 static int hci_uart_tty_open(struct tty_struct *tty)
@@ -365,15 +365,15 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
 }
 
 /* hci_uart_tty_receive()
- * 
+ *
  *     Called by tty low level driver when receive data is
  *     available.
- *     
+ *
  * Arguments:  tty          pointer to tty isntance data
  *             data         pointer to received data
  *             flags        pointer to flags for data
  *             count        count of received data in bytes
- *     
+ *
  * Return Value:    None
  */
 static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count)
@@ -388,7 +388,10 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *f
 
 	spin_lock(&hu->rx_lock);
 	hu->proto->recv(hu, (void *) data, count);
-	hu->hdev->stat.byte_rx += count;
+
+	if (hu->hdev)
+		hu->hdev->stat.byte_rx += count;
+
 	spin_unlock(&hu->rx_lock);
 
 	tty_unthrottle(tty);