[media] rename most media/video pci drivers to media/pci

Rename all PCI drivers with their own directory under
drivers/media/video into drivers/media/pci and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 177 deletions

diff --git a/drivers/media/video/cx23885/cx23885-f300.c b/drivers/media/video/cx23885/cx23885-f300.c
deleted file mode 100644
index 93998f2..0000000
--- a/drivers/media/video/cx23885/cx23885-f300.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Driver for Silicon Labs C8051F300 microcontroller.
- *
- * It is used for LNB power control in TeVii S470,
- * TBS 6920 PCIe DVB-S2 cards.
- *
- * Microcontroller connected to cx23885 GPIO pins:
- * GPIO0 - data		- P0.3 F300
- * GPIO1 - reset	- P0.2 F300
- * GPIO2 - clk		- P0.1 F300
- * GPIO3 - busy		- P0.0 F300
- *
- * Copyright (C) 2009 Igor M. Liplianin <liplianin@me.by>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "cx23885.h"
-
-#define F300_DATA	GPIO_0
-#define F300_RESET	GPIO_1
-#define F300_CLK	GPIO_2
-#define F300_BUSY	GPIO_3
-
-static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl)
-{
-	cx23885_gpio_enable(dev, line, 1);
-	if (lvl == 1)
-		cx23885_gpio_set(dev, line);
-	else
-		cx23885_gpio_clear(dev, line);
-}
-
-static u8 f300_get_line(struct cx23885_dev *dev, u32 line)
-{
-	cx23885_gpio_enable(dev, line, 0);
-
-	return cx23885_gpio_get(dev, line);
-}
-
-static void f300_send_byte(struct cx23885_dev *dev, u8 dta)
-{
-	u8 i;
-
-	for (i = 0; i < 8; i++) {
-		f300_set_line(dev, F300_CLK, 0);
-		udelay(30);
-		f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */
-		udelay(30);
-		dta <<= 1;
-		f300_set_line(dev, F300_CLK, 1);
-		udelay(30);
-	}
-}
-
-static u8 f300_get_byte(struct cx23885_dev *dev)
-{
-	u8 i, dta = 0;
-
-	for (i = 0; i < 8; i++) {
-		f300_set_line(dev, F300_CLK, 0);
-		udelay(30);
-		dta <<= 1;
-		f300_set_line(dev, F300_CLK, 1);
-		udelay(30);
-		dta |= f300_get_line(dev, F300_DATA);/* msb first */
-
-	}
-
-	return dta;
-}
-
-static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
-{
-	struct cx23885_tsport *port = fe->dvb->priv;
-	struct cx23885_dev *dev = port->dev;
-	u8 i, temp, ret = 0;
-
-	temp = buf[0];
-	for (i = 0; i < buf[0]; i++)
-		temp += buf[i + 1];
-	temp = (~temp + 1);/* get check sum */
-	buf[1 + buf[0]] = temp;
-
-	f300_set_line(dev, F300_RESET, 1);
-	f300_set_line(dev, F300_CLK, 1);
-	udelay(30);
-	f300_set_line(dev, F300_DATA, 1);
-	msleep(1);
-
-	/* question: */
-	f300_set_line(dev, F300_RESET, 0);/* begin to send data */
-	msleep(1);
-
-	f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
-	msleep(1);
-
-	temp = buf[0];
-	temp += 2;
-	for (i = 0; i < temp; i++)
-		f300_send_byte(dev, buf[i]);
-
-	f300_set_line(dev, F300_RESET, 1);/* sent data over */
-	f300_set_line(dev, F300_DATA, 1);
-
-	/* answer: */
-	temp = 0;
-	for (i = 0; ((i < 8) & (temp == 0)); i++) {
-		msleep(1);
-		if (f300_get_line(dev, F300_BUSY) == 0)
-			temp = 1;
-	}
-
-	if (i > 7) {
-		printk(KERN_ERR "%s: timeout, the slave no response\n",
-								__func__);
-		ret = 1; /* timeout, the slave no response */
-	} else { /* the slave not busy, prepare for getting data */
-		f300_set_line(dev, F300_RESET, 0);/*ready...*/
-		msleep(1);
-		f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
-		msleep(1);
-		temp = f300_get_byte(dev);/*get the data length */
-		if (temp > 14)
-			temp = 14;
-
-		for (i = 0; i < (temp + 1); i++)
-			f300_get_byte(dev);/* get data to empty buffer */
-
-		f300_set_line(dev, F300_RESET, 1);/* received data over */
-		f300_set_line(dev, F300_DATA, 1);
-	}
-
-	return ret;
-}
-
-int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	u8 buf[16];
-
-	buf[0] = 0x05;
-	buf[1] = 0x38;/* write port */
-	buf[2] = 0x01;/* A port, lnb power */
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		buf[3] = 0x01;/* power on */
-		buf[4] = 0x02;/* B port, H/V */
-		buf[5] = 0x00;/*13V v*/
-		break;
-	case SEC_VOLTAGE_18:
-		buf[3] = 0x01;
-		buf[4] = 0x02;
-		buf[5] = 0x01;/* 18V h*/
-		break;
-	case SEC_VOLTAGE_OFF:
-		buf[3] = 0x00;/* power off */
-		buf[4] = 0x00;
-		buf[5] = 0x00;
-		break;
-	}
-
-	return f300_xfer(fe, buf);
-}