mmc: Move regulator handling closer to core

After discovering a problem in regulator reference counting I took Mark
Brown's advice to move the reference count into the MMC core by making the
regulator status a member of struct mmc_host.

I took this opportunity to also implement NULL versions of
the regulator functions so as to rid the driver code from
some ugly #ifdef CONFIG_REGULATOR clauses.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Sundar Iyer <sundar.iyer@stericsson.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Cliff Brake <cbrake@bec-systems.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 13 insertions, 8 deletions

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 03c26e0..8c863cc 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -250,9 +250,9 @@ static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
 		mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
 
 	if (power_on)
-		ret = mmc_regulator_set_ocr(host->vcc, vdd);
+		ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
 	else
-		ret = mmc_regulator_set_ocr(host->vcc, 0);
+		ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
 
 	if (mmc_slot(host).after_set_reg)
 		mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
@@ -291,18 +291,23 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
 	 * chips/cards need an interface voltage rail too.
 	 */
 	if (power_on) {
-		ret = mmc_regulator_set_ocr(host->vcc, vdd);
+		ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
 		/* Enable interface voltage rail, if needed */
 		if (ret == 0 && host->vcc_aux) {
 			ret = regulator_enable(host->vcc_aux);
 			if (ret < 0)
-				ret = mmc_regulator_set_ocr(host->vcc, 0);
+				ret = mmc_regulator_set_ocr(host->mmc,
+							host->vcc, 0);
 		}
 	} else {
+		/* Shut down the rail */
 		if (host->vcc_aux)
 			ret = regulator_disable(host->vcc_aux);
-		if (ret == 0)
-			ret = mmc_regulator_set_ocr(host->vcc, 0);
+		if (!ret) {
+			/* Then proceed to shut down the local regulator */
+			ret = mmc_regulator_set_ocr(host->mmc,
+						host->vcc, 0);
+		}
 	}
 
 	if (mmc_slot(host).after_set_reg)
@@ -343,9 +348,9 @@ static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
 	if (cardsleep) {
 		/* VCC can be turned off if card is asleep */
 		if (sleep)
-			err = mmc_regulator_set_ocr(host->vcc, 0);
+			err = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
 		else
-			err = mmc_regulator_set_ocr(host->vcc, vdd);
+			err = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
 	} else
 		err = regulator_set_mode(host->vcc, mode);
 	if (err)