summaryrefslogtreecommitdiff
path: root/drivers/net/stmmac/stmmac_main.c
diff options
context:
space:
mode:
authorGiuseppe CAVALLARO <peppe.cavallaro@st.com>2010-09-17 03:23:40 (GMT)
committerDavid S. Miller <davem@davemloft.net>2010-09-17 23:12:57 (GMT)
commitebbb293f8b3021ae2009fcb7cb3b8a52fb5fd06a (patch)
tree9ee381c887f2bc585c103a34b349d85fd95a2567 /drivers/net/stmmac/stmmac_main.c
parentdfb8fb96ae2b5126cd0c08c0ccd7c42e1f46568a (diff)
downloadlinux-fsl-qoriq-ebbb293f8b3021ae2009fcb7cb3b8a52fb5fd06a.tar.xz
stmmac: consolidate and tidy-up the COE support
The first version of the driver had hard-coded the logic for handling the checksum offloading. This was designed according to the chips included in the STM platforms where: o MAC10/100 supports no COE at all. o GMAC fully supports RX/TX COE. This is not good for other chip configurations where, for example, the mac10/100 supports the tx csum in HW or when the GMAC has no IPC. Thanks to Johannes Stezenbach; he provided me a first draft of this patch that only reviewed the IPC for the GMAC devices. This patch also helps on SPEAr platforms where the MAC10/100 can perform the TX csum in HW. Thanks to Deepak SIKRI for his support on this. In the end, GMAC devices for STM platforms have a bugged Jumbo frame support that needs to have the Tx COE disabled for oversized frames (due to limited buffer sizes). This information is also passed through the driver's platform structure. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Deepak SIKRI <deepak.sikri@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/stmmac/stmmac_main.c')
-rw-r--r--drivers/net/stmmac/stmmac_main.c66
1 files changed, 32 insertions, 34 deletions
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index a169b14..a908f72 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -134,13 +134,6 @@ static int buf_sz = DMA_BUFFER_SIZE;
module_param(buf_sz, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
-/* In case of Giga ETH, we can enable/disable the COE for the
- * transmit HW checksum computation.
- * Note that, if tx csum is off in HW, SG will be still supported. */
-static int tx_coe = HW_CSUM;
-module_param(tx_coe, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]");
-
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_IFUP |
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
@@ -569,29 +562,22 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv : pointer to the private device structure.
* Description: it sets the DMA operation mode: tx/rx DMA thresholds
- * or Store-And-Forward capability. It also verifies the COE for the
- * transmission in case of Giga ETH.
+ * or Store-And-Forward capability.
*/
static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
{
- if (!priv->is_gmac) {
- /* MAC 10/100 */
- priv->hw->dma->dma_mode(priv->ioaddr, tc, 0);
- priv->tx_coe = NO_HW_CSUM;
- } else {
- if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) {
- priv->hw->dma->dma_mode(priv->ioaddr,
- SF_DMA_MODE, SF_DMA_MODE);
- tc = SF_DMA_MODE;
- priv->tx_coe = HW_CSUM;
- } else {
- /* Checksum computation is performed in software. */
- priv->hw->dma->dma_mode(priv->ioaddr, tc,
- SF_DMA_MODE);
- priv->tx_coe = NO_HW_CSUM;
- }
- }
- tx_coe = priv->tx_coe;
+ if (likely((priv->tx_coe) && (!priv->no_csum_insertion))) {
+ /* In case of GMAC, SF mode has to be enabled
+ * to perform the TX COE. This depends on:
+ * 1) TX COE if actually supported
+ * 2) There is no bugged Jumbo frame support
+ * that needs to not insert csum in the TDES.
+ */
+ priv->hw->dma->dma_mode(priv->ioaddr,
+ SF_DMA_MODE, SF_DMA_MODE);
+ tc = SF_DMA_MODE;
+ } else
+ priv->hw->dma->dma_mode(priv->ioaddr, tc, SF_DMA_MODE);
}
/**
@@ -858,6 +844,12 @@ static int stmmac_open(struct net_device *dev)
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
+ priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+ if (priv->rx_coe)
+ pr_info("stmmac: Rx Checksum Offload Engine supported\n");
+ if (priv->tx_coe)
+ pr_info("\tTX Checksum insertion supported\n");
+
priv->shutdown = 0;
/* Initialise the MMC (if present) to disable all interrupts. */
@@ -1066,7 +1058,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
return stmmac_sw_tso(priv, skb);
if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
- if (likely(priv->tx_coe == NO_HW_CSUM))
+ if (unlikely((!priv->tx_coe) || (priv->no_csum_insertion)))
skb_checksum_help(skb);
else
csum_insertion = 1;
@@ -1390,6 +1382,15 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
return -EINVAL;
}
+ /* Some GMAC devices have a bugged Jumbo frame support that
+ * needs to have the Tx COE disabled for oversized frames
+ * (due to limited buffer sizes). In this case we disable
+ * the TX csum insertionin the TDES and not use SF. */
+ if ((priv->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
+ priv->no_csum_insertion = 1;
+ else
+ priv->no_csum_insertion = 0;
+
dev->mtu = new_mtu;
return 0;
@@ -1510,9 +1511,6 @@ static int stmmac_probe(struct net_device *dev)
#endif
priv->msg_enable = netif_msg_init(debug, default_msg_level);
- if (priv->is_gmac)
- priv->rx_csum = 1;
-
if (flow_ctrl)
priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
@@ -1662,7 +1660,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
ret = -ENODEV;
goto out;
}
- pr_info("done!\n");
+ pr_info("\tdone!\n");
if (!request_mem_region(res->start, resource_size(res),
pdev->name)) {
@@ -1705,6 +1703,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
priv->bus_id = plat_dat->bus_id;
priv->pbl = plat_dat->pbl; /* TLI */
priv->mii_clk_csr = plat_dat->clk_csr;
+ priv->tx_coe = plat_dat->tx_coe;
+ priv->bugged_jumbo = plat_dat->bugged_jumbo;
priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */
priv->enh_desc = plat_dat->enh_desc;
priv->ioaddr = addr;
@@ -1966,8 +1966,6 @@ static int __init stmmac_cmdline_opt(char *str)
strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz);
else if (!strncmp(opt, "tc:", 3))
strict_strtoul(opt + 3, 0, (unsigned long *)&tc);
- else if (!strncmp(opt, "tx_coe:", 7))
- strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe);
else if (!strncmp(opt, "watchdog:", 9))
strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog);
else if (!strncmp(opt, "flow_ctrl:", 10))