summaryrefslogtreecommitdiff
path: root/drivers/pci/probe.c
diff options
context:
space:
mode:
authorRafael J. Wysocki <rjw@sisk.pl>2008-07-07 01:34:48 (GMT)
committerJesse Barnes <jbarnes@virtuousgeek.org>2008-07-07 23:26:28 (GMT)
commiteb9d0fe40e313c0a74115ef456a2e43a6c8da72f (patch)
tree7a90a68b8dc152d49a38469fd6a6a7840954bac2 /drivers/pci/probe.c
parent0af4b8c4fb31193dc666f4893107a18fef82baab (diff)
downloadlinux-fsl-qoriq-eb9d0fe40e313c0a74115ef456a2e43a6c8da72f.tar.xz
PCI ACPI: Rework PCI handling of wake-up
* Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Diffstat (limited to 'drivers/pci/probe.c')
-rw-r--r--drivers/pci/probe.c47
1 files changed, 3 insertions, 44 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 2f0ae70..b1724cf 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -860,49 +860,6 @@ int pci_cfg_space_size_ext(struct pci_dev *dev)
return PCI_CFG_SPACE_SIZE;
}
-/**
- * pci_disable_pme - Disable the PME function of PCI device
- * @dev: PCI device affected
- * -EINVAL is returned if PCI device doesn't support PME.
- * Zero is returned if the PME is supported and can be disabled.
- */
-static int pci_disable_pme(struct pci_dev *dev)
-{
- int pm;
- u16 value;
-
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- /* If device doesn't support PM Capabilities, it means that PME is
- * not supported.
- */
- if (!pm)
- return -EINVAL;
- /* Check device's ability to generate PME# */
- pci_read_config_word(dev, pm + PCI_PM_PMC, &value);
-
- value &= PCI_PM_CAP_PME_MASK;
- /* Check if it can generate PME# */
- if (!value) {
- /*
- * If it is zero, it means that PME is still unsupported
- * although there exists the PM capability.
- */
- return -EINVAL;
- }
-
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
-
- /* Clear PME_Status by writing 1 to it */
- value |= PCI_PM_CTRL_PME_STATUS ;
- /* Disable PME enable bit */
- value &= ~PCI_PM_CTRL_PME_ENABLE;
- pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
-
- return 0;
-}
-
int pci_cfg_space_size(struct pci_dev *dev)
{
int pos;
@@ -1010,7 +967,6 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
}
pci_vpd_pci22_init(dev);
- pci_disable_pme(dev);
return dev;
}
@@ -1031,6 +987,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
/* Fix up broken headers */
pci_fixup_device(pci_fixup_header, dev);
+ /* Initialize power management of the device */
+ pci_pm_init(dev);
+
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.