Merge branch 'master' into for-upstream

Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile

1 files changed, 189 insertions, 126 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index acc95b2..dd4cd5a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -45,7 +45,7 @@ if USB_GADGET
 
 config USB_GADGET_DEBUG
 	boolean "Debugging messages (DEVELOPMENT)"
-	depends on USB_GADGET && DEBUG_KERNEL
+	depends on DEBUG_KERNEL
 	help
 	   Many controller and gadget drivers will print some debugging
 	   messages if you use this option to ask for those messages.
@@ -59,7 +59,7 @@ config USB_GADGET_DEBUG
 
 config USB_GADGET_DEBUG_FILES
 	boolean "Debugging information files (DEVELOPMENT)"
-	depends on USB_GADGET && PROC_FS
+	depends on PROC_FS
 	help
 	   Some of the drivers in the "gadget" framework can expose
 	   debugging information in files such as /proc/driver/udc
@@ -70,7 +70,7 @@ config USB_GADGET_DEBUG_FILES
 
 config USB_GADGET_DEBUG_FS
 	boolean "Debugging information files in debugfs (DEVELOPMENT)"
-	depends on USB_GADGET && DEBUG_FS
+	depends on DEBUG_FS
 	help
 	   Some of the drivers in the "gadget" framework can expose
 	   debugging information in files under /sys/kernel/debug/.
@@ -79,12 +79,36 @@ config USB_GADGET_DEBUG_FS
 	   Enable these files by choosing "Y" here.  If in doubt, or
 	   to conserve kernel memory, say "N".
 
+config USB_GADGET_VBUS_DRAW
+	int "Maximum VBUS Power usage (2-500 mA)"
+	range 2 500
+	default 2
+	help
+	   Some devices need to draw power from USB when they are
+	   configured, perhaps to operate circuitry or to recharge
+	   batteries.  This is in addition to any local power supply,
+	   such as an AC adapter or batteries.
+
+	   Enter the maximum power your device draws through USB, in
+	   milliAmperes.  The permitted range of values is 2 - 500 mA;
+	   0 mA would be legal, but can make some hosts misbehave.
+
+	   This value will be used except for system-specific gadget
+	   drivers that have more specific information.
+
 config	USB_GADGET_SELECTED
 	boolean
 
 #
 # USB Peripheral Controller Support
 #
+# The order here is alphabetical, except that integrated controllers go
+# before discrete ones so they will be the initial/default value:
+#   - integrated/SOC controllers first
+#   - licensed IP used in both SOC and discrete versions
+#   - discrete ones (including all PCI-only controllers)
+#   - debug/dummy gadget+hcd is last.
+#
 choice
 	prompt "USB Peripheral Controller"
 	depends on USB_GADGET
@@ -94,26 +118,27 @@ choice
 	   Many controller drivers are platform-specific; these
 	   often need board-specific hooks.
 
-config USB_GADGET_AMD5536UDC
-	boolean "AMD5536 UDC"
-	depends on PCI
-	select USB_GADGET_DUALSPEED
+#
+# Integrated controllers
+#
+
+config USB_GADGET_AT91
+	boolean "Atmel AT91 USB Device Port"
+	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+	select USB_GADGET_SELECTED
 	help
-	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
-	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
-	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
-	   The UDC port supports OTG operation, and may be used as a host port
-	   if it's not being used to implement peripheral or OTG roles.
+	   Many Atmel AT91 processors (such as the AT91RM2000) have a
+	   full speed USB Device Port with support for five configurable
+	   endpoints (plus endpoint zero).
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "amd5536udc" and force all
+	   dynamically linked module called "at91_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_AMD5536UDC
+config USB_AT91
 	tristate
-	depends on USB_GADGET_AMD5536UDC
+	depends on USB_GADGET_AT91
 	default USB_GADGET
-	select USB_GADGET_SELECTED
 
 config USB_GADGET_ATMEL_USBA
 	boolean "Atmel USBA"
@@ -150,28 +175,50 @@ config USB_FSL_USB2
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_NET2280
-	boolean "NetChip 228x"
-	depends on PCI
-	select USB_GADGET_DUALSPEED
+config USB_GADGET_LH7A40X
+	boolean "LH7A40X"
+	depends on ARCH_LH7A40X
 	help
-	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
-	   supports both full and high speed USB 2.0 data transfers.  
-	   
-	   It has six configurable endpoints, as well as endpoint zero
-	   (for control transfers) and several endpoints with dedicated
-	   functions.
+	   This driver provides USB Device Controller driver for LH7A40x
+
+config USB_LH7A40X
+	tristate
+	depends on USB_GADGET_LH7A40X
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
+config USB_GADGET_OMAP
+	boolean "OMAP USB Device Controller"
+	depends on ARCH_OMAP
+	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+	help
+	   Many Texas Instruments OMAP processors have flexible full
+	   speed USB device controllers, with support for up to 30
+	   endpoints (plus endpoint zero).  This driver supports the
+	   controller in the OMAP 1611, and should work with controllers
+	   in other OMAP processors too, given minor tweaks.
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "net2280" and force all
+	   dynamically linked module called "omap_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_NET2280
+config USB_OMAP
 	tristate
-	depends on USB_GADGET_NET2280
+	depends on USB_GADGET_OMAP
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_OTG
+	boolean "OTG Support"
+	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+	help
+	   The most notable feature of USB OTG is support for a
+	   "Dual-Role" device, which can act as either a device
+	   or a host.  The initial role choice can be changed
+	   later, when two dual-role devices talk to each other.
+
+	   Select this only if your OMAP board has a Mini-AB connector.
+
 config USB_GADGET_PXA25X
 	boolean "PXA 25x or IXP 4xx"
 	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
@@ -203,34 +250,6 @@ config USB_PXA25X_SMALL
 	default y if USB_ETH
 	default y if USB_G_SERIAL
 
-config USB_GADGET_M66592
-	boolean "Renesas M66592 USB Peripheral Controller"
-	select USB_GADGET_DUALSPEED
-	help
-	   M66592 is a discrete USB peripheral controller chip that
-	   supports both full and high speed USB 2.0 data transfers.
-	   It has seven configurable endpoints, and endpoint zero.
-
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "m66592_udc" and force all
-	   gadget drivers to also be dynamically linked.
-
-config USB_M66592
-	tristate
-	depends on USB_GADGET_M66592
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config SUPERH_BUILT_IN_M66592
-	boolean "Enable SuperH built-in USB like the M66592"
-	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
-	help
-	   SH7722 has USB like the M66592.
-
-	   The transfer rate is very slow when use "Ethernet Gadget".
-	   However, this problem is improved if change a value of
-	   NET_IP_ALIGN to 4.
-
 config USB_GADGET_PXA27X
 	boolean "PXA 27x"
 	depends on ARCH_PXA && PXA27x
@@ -251,40 +270,32 @@ config USB_PXA27X
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_GOKU
-	boolean "Toshiba TC86C001 'Goku-S'"
-	depends on PCI
+config USB_GADGET_S3C2410
+	boolean "S3C2410 USB Device Controller"
+	depends on ARCH_S3C2410
 	help
-	   The Toshiba TC86C001 is a PCI device which includes controllers
-	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
-	   
-	   The device controller has three configurable (bulk or interrupt)
-	   endpoints, plus endpoint zero (for control transfers).
+	  Samsung's S3C2410 is an ARM-4 processor with an integrated
+	  full speed USB 1.1 device controller.  It has 4 configurable
+	  endpoints, as well as endpoint zero (for control transfers).
 
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "goku_udc" and to force all
-	   gadget drivers to also be dynamically linked.
+	  This driver has been tested on the S3C2410, S3C2412, and
+	  S3C2440 processors.
 
-config USB_GOKU
+config USB_S3C2410
 	tristate
-	depends on USB_GADGET_GOKU
+	depends on USB_GADGET_S3C2410
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_S3C2410_DEBUG
+	boolean "S3C2410 udc debug messages"
+	depends on USB_GADGET_S3C2410
 
-config USB_GADGET_LH7A40X
-	boolean "LH7A40X"
-	depends on ARCH_LH7A40X
-	help
-    This driver provides USB Device Controller driver for LH7A40x
-
-config USB_LH7A40X
-	tristate
-	depends on USB_GADGET_LH7A40X
-	default USB_GADGET
-	select USB_GADGET_SELECTED
+#
+# Controllers available in both integrated and discrete versions
+#
 
-# built in ../musb along with host support
+# musb builds in ../musb along with host support
 config USB_GADGET_MUSB_HDRC
 	boolean "Inventra HDRC USB Peripheral (TI, ...)"
 	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
@@ -294,76 +305,124 @@ config USB_GADGET_MUSB_HDRC
 	  This OTG-capable silicon IP is used in dual designs including
 	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
 
-config USB_GADGET_OMAP
-	boolean "OMAP USB Device Controller"
-	depends on ARCH_OMAP
-	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+config USB_GADGET_M66592
+	boolean "Renesas M66592 USB Peripheral Controller"
+	select USB_GADGET_DUALSPEED
 	help
-	   Many Texas Instruments OMAP processors have flexible full
-	   speed USB device controllers, with support for up to 30
-	   endpoints (plus endpoint zero).  This driver supports the
-	   controller in the OMAP 1611, and should work with controllers
-	   in other OMAP processors too, given minor tweaks.
+	   M66592 is a discrete USB peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has seven configurable endpoints, and endpoint zero.
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "omap_udc" and force all
+	   dynamically linked module called "m66592_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_OMAP
+config USB_M66592
 	tristate
-	depends on USB_GADGET_OMAP
+	depends on USB_GADGET_M66592
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_OTG
-	boolean "OTG Support"
-	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+config SUPERH_BUILT_IN_M66592
+	boolean "Enable SuperH built-in USB like the M66592"
+	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
 	help
-	   The most notable feature of USB OTG is support for a
-	   "Dual-Role" device, which can act as either a device
-	   or a host.  The initial role choice can be changed
-	   later, when two dual-role devices talk to each other.
+	   SH7722 has USB like the M66592.
 
-	   Select this only if your OMAP board has a Mini-AB connector.
+	   The transfer rate is very slow when use "Ethernet Gadget".
+	   However, this problem is improved if change a value of
+	   NET_IP_ALIGN to 4.
 
-config USB_GADGET_S3C2410
-	boolean "S3C2410 USB Device Controller"
-	depends on ARCH_S3C2410
+#
+# Controllers available only in discrete form (and all PCI controllers)
+#
+
+config USB_GADGET_AMD5536UDC
+	boolean "AMD5536 UDC"
+	depends on PCI
+	select USB_GADGET_DUALSPEED
 	help
-	  Samsung's S3C2410 is an ARM-4 processor with an integrated
-	  full speed USB 1.1 device controller.  It has 4 configurable
-	  endpoints, as well as endpoint zero (for control transfers).
+	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
+	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
+	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+	   The UDC port supports OTG operation, and may be used as a host port
+	   if it's not being used to implement peripheral or OTG roles.
 
-	  This driver has been tested on the S3C2410, S3C2412, and
-	  S3C2440 processors.
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "amd5536udc" and force all
+	   gadget drivers to also be dynamically linked.
 
-config USB_S3C2410
+config USB_AMD5536UDC
 	tristate
-	depends on USB_GADGET_S3C2410
+	depends on USB_GADGET_AMD5536UDC
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_S3C2410_DEBUG
-	boolean "S3C2410 udc debug messages"
-	depends on USB_GADGET_S3C2410
+config USB_GADGET_FSL_QE
+	boolean "Freescale QE/CPM USB Device Controller"
+	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	help
+	   Some of Freescale PowerPC processors have a Full Speed
+	   QE/CPM2 USB controller, which support device mode with 4
+	   programmable endpoints. This driver supports the
+	   controller in the MPC8360 and MPC8272, and should work with
+	   controllers having QE or CPM2, given minor tweaks.
 
-config USB_GADGET_AT91
-	boolean "AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+	   Set CONFIG_USB_GADGET to "m" to build this driver as a
+	   dynmically linked module called "fsl_qe_udc".
+
+config USB_FSL_QE
+	tristate
+	depends on USB_GADGET_FSL_QE
+	default USB_GADGET
 	select USB_GADGET_SELECTED
+
+config USB_GADGET_NET2280
+	boolean "NetChip 228x"
+	depends on PCI
+	select USB_GADGET_DUALSPEED
 	help
-	   Many Atmel AT91 processors (such as the AT91RM2000) have a
-	   full speed USB Device Port with support for five configurable
-	   endpoints (plus endpoint zero).
+	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
+	   supports both full and high speed USB 2.0 data transfers.
+
+	   It has six configurable endpoints, as well as endpoint zero
+	   (for control transfers) and several endpoints with dedicated
+	   functions.
 
 	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "at91_udc" and force all
+	   dynamically linked module called "net2280" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_AT91
+config USB_NET2280
 	tristate
-	depends on USB_GADGET_AT91
+	depends on USB_GADGET_NET2280
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
+config USB_GADGET_GOKU
+	boolean "Toshiba TC86C001 'Goku-S'"
+	depends on PCI
+	help
+	   The Toshiba TC86C001 is a PCI device which includes controllers
+	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
+
+	   The device controller has three configurable (bulk or interrupt)
+	   endpoints, plus endpoint zero (for control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "goku_udc" and to force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_GOKU
+	tristate
+	depends on USB_GADGET_GOKU
 	default USB_GADGET
+	select USB_GADGET_SELECTED
+
+
+#
+# LAST -- dummy/emulated controller
+#
 
 config USB_GADGET_DUMMY_HCD
 	boolean "Dummy HCD (DEVELOPMENT)"
@@ -553,19 +612,23 @@ config USB_FILE_STORAGE_TEST
 	  normal operation.
 
 config USB_G_SERIAL
-	tristate "Serial Gadget (with CDC ACM support)"
+	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
 	help
 	  The Serial Gadget talks to the Linux-USB generic serial driver.
 	  This driver supports a CDC-ACM module option, which can be used
 	  to interoperate with MS-Windows hosts or with the Linux-USB
 	  "cdc-acm" driver.
 
+	  This driver also supports a CDC-OBEX option.  You will need a
+	  user space OBEX server talking to /dev/ttyGS*, since the kernel
+	  itself doesn't implement the OBEX protocol.
+
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "g_serial".
 
 	  For more information, see Documentation/usb/gadget_serial.txt
 	  which includes instructions and a "driver info file" needed to
-	  make MS-Windows work with this driver.
+	  make MS-Windows work with CDC ACM.
 
 config USB_MIDI_GADGET
 	tristate "MIDI Gadget (EXPERIMENTAL)"