Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

5 files changed, 79 insertions, 112 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index db16112..2181ce4 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1475,7 +1475,7 @@ static int aty128fb_set_par(struct fb_info *info)
 	aty128_set_pll(&par->pll, par);
 	aty128_set_fifo(&par->fifo_reg, par);
 
-	config = aty_ld_le32(CONFIG_CNTL) & ~3;
+	config = aty_ld_le32(CNFG_CNTL) & ~3;
 
 #if defined(__BIG_ENDIAN)
 	if (par->crtc.bpp == 32)
@@ -1484,7 +1484,7 @@ static int aty128fb_set_par(struct fb_info *info)
 		config |= 1;	/* make aperture do 16 bit swapping */
 #endif
 
-	aty_st_le32(CONFIG_CNTL, config);
+	aty_st_le32(CNFG_CNTL, config);
 	aty_st_8(CRTC_EXT_CNTL + 1, 0);	/* turn the video back on */
 
 	info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
@@ -1875,7 +1875,7 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i
 	u32 dac;
 
 	/* Get the chip revision */
-	chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F;
+	chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
 
 	strcpy(video_card, "Rage128 XX ");
 	video_card[8] = ent->device >> 8;
@@ -2057,7 +2057,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_
 
 	/* Grab memory size from the card */
 	// How does this relate to the resource length from the PCI hardware?
-	par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+	par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
 
 	/* Virtualize the framebuffer */
 	info->screen_base = ioremap(fb_addr, par->vram_size);
@@ -2365,7 +2365,6 @@ static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx
 static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 {
 	u32	pmgt;
-	u16	pwr_command;
 	struct pci_dev *pdev = par->pdev;
 
 	if (!par->pm_reg)
@@ -2374,6 +2373,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 	/* Set the chip into the appropriate suspend mode (we use D2,
 	 * D3 would require a complete re-initialisation of the chip,
 	 * including PCI config registers, clocks, AGP configuration, ...)
+	 *
+	 * For resume, the core will have already brought us back to D0
 	 */
 	if (suspend) {
 		/* Make sure CRTC2 is reset. Remove that the day we decide to
@@ -2391,17 +2392,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 		aty_st_le32(BUS_CNTL1, 0x00000010);
 		aty_st_le32(MEM_POWER_MISC, 0x0c830000);
 		mdelay(100);
-		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+
 		/* Switch PCI power management to D2 */
-		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
-			(pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
-		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-	} else {
-		/* Switch back PCI power management to D0 */
-		mdelay(100);
-		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
-		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-		mdelay(100);
+		pci_set_power_state(pdev, PCI_D2);
 	}
 }
 
@@ -2410,6 +2403,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct aty128fb_par *par = info->par;
 
+	/* Because we may change PCI D state ourselves, we need to
+	 * first save the config space content so the core can
+	 * restore it properly on resume.
+	 */
+	pci_save_state(pdev);
+
 	/* We don't do anything but D2, for now we return 0, but
 	 * we may want to change that. How do we know if the BIOS
 	 * can properly take care of D3 ? Also, with swsusp, we
@@ -2476,6 +2475,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
 	if (pdev->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
+	/* PCI state will have been restored by the core, so
+	 * we should be in D0 now with our config space fully
+	 * restored
+	 */
+
 	/* Wakeup chip */
 	aty128_set_suspend(par, 0);
 	par->asleep = 0;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index cc6b470..1207c20 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -135,7 +135,7 @@
 #if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \
 defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT)
 static const u32 lt_lcd_regs[] = {
-	CONFIG_PANEL_LG,
+	CNFG_PANEL_LG,
 	LCD_GEN_CNTL_LG,
 	DSTN_CONTROL_LG,
 	HFB_PITCH_ADDR_LG,
@@ -446,7 +446,7 @@ static int __devinit correct_chipset(struct atyfb_par *par)
 	par->pll_limits.ecp_max = aty_chips[i].ecp_max;
 	par->features = aty_chips[i].features;
 
-	chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+	chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
 	type = chip_id & CFG_CHIP_TYPE;
 	rev = (chip_id & CFG_CHIP_REV) >> 24;
 
@@ -629,7 +629,7 @@ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc)
 		    crtc->lcd_index = aty_ld_le32(LCD_INDEX, par);
 		    aty_st_le32(LCD_INDEX, crtc->lcd_index, par);
 		}
-		crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par);
+		crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par);
 		crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par);
 
 
@@ -676,7 +676,7 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc)
 		aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par);
 
 		/* update non-shadow registers first */
-		aty_st_lcd(CONFIG_PANEL, crtc->lcd_config_panel, par);
+		aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par);
 		aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl &
 			~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par);
 
@@ -858,7 +858,7 @@ static int aty_var_to_crtc(const struct fb_info *info,
 		if (!M64_HAS(MOBIL_BUS))
 			crtc->lcd_index |= CRTC2_DISPLAY_DIS;
 
-		crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par) | 0x4000;
+		crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par) | 0x4000;
 		crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par) & ~CRTC_RW_SELECT;
 
 		crtc->lcd_gen_cntl &=
@@ -1978,7 +1978,7 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par)
 
 	return timeout ? 0 : -EIO;
 }
-#endif
+#endif /* CONFIG_PPC_PMAC */
 
 static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 {
@@ -2002,9 +2002,15 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	par->asleep = 1;
 	par->lock_blank = 1;
 
+	/* Because we may change PCI D state ourselves, we need to
+	 * first save the config space content so the core can
+	 * restore it properly on resume.
+	 */
+	pci_save_state(pdev);
+
 #ifdef CONFIG_PPC_PMAC
 	/* Set chip to "suspend" mode */
-	if (aty_power_mgmt(1, par)) {
+	if (machine_is(powermac) && aty_power_mgmt(1, par)) {
 		par->asleep = 0;
 		par->lock_blank = 0;
 		atyfb_blank(FB_BLANK_UNBLANK, info);
@@ -2047,11 +2053,15 @@ static int atyfb_pci_resume(struct pci_dev *pdev)
 
 	acquire_console_sem();
 
+	/* PCI state will have been restored by the core, so
+	 * we should be in D0 now with our config space fully
+	 * restored
+	 */
+
 #ifdef CONFIG_PPC_PMAC
-	if (pdev->dev.power.power_state.event == 2)
+	if (machine_is(powermac) &&
+	    pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
 		aty_power_mgmt(0, par);
-#else
-	pci_set_power_state(pdev, PCI_D0);
 #endif
 
 	aty_resume_chip(info);
@@ -2254,7 +2264,7 @@ static int __devinit aty_init(struct fb_info *info)
 	if (!M64_HAS(INTEGRATED)) {
 		u32 stat0;
 		u8 dac_type, dac_subtype, clk_type;
-		stat0 = aty_ld_le32(CONFIG_STAT0, par);
+		stat0 = aty_ld_le32(CNFG_STAT0, par);
 		par->bus_type = (stat0 >> 0) & 0x07;
 		par->ram_type = (stat0 >> 3) & 0x07;
 		ramname = aty_gx_ram[par->ram_type];
@@ -2324,7 +2334,7 @@ static int __devinit aty_init(struct fb_info *info)
 		par->dac_ops = &aty_dac_ct;
 		par->pll_ops = &aty_pll_ct;
 		par->bus_type = PCI;
-		par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07);
+		par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
 		ramname = aty_ct_ram[par->ram_type];
 		/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
 		if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
@@ -2433,7 +2443,7 @@ static int __devinit aty_init(struct fb_info *info)
 		}
 
 	if (M64_HAS(MAGIC_VRAM_SIZE)) {
-		if (aty_ld_le32(CONFIG_STAT1, par) & 0x40000000)
+		if (aty_ld_le32(CNFG_STAT1, par) & 0x40000000)
 			info->fix.smem_len += 0x400000;
 	}
 
@@ -2946,7 +2956,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 		 * Fix PROMs idea of MEM_CNTL settings...
 		 */
 		mem = aty_ld_le32(MEM_CNTL, par);
-		chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+		chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
 		if (((chip_id & CFG_CHIP_TYPE) == VT_CHIP_ID) && !((chip_id >> 24) & 1)) {
 			switch (mem & 0x0f) {
 			case 3:
@@ -2964,7 +2974,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 			default:
 				break;
 			}
-			if ((aty_ld_le32(CONFIG_STAT0, par) & 7) >= SDRAM)
+			if ((aty_ld_le32(CNFG_STAT0, par) & 7) >= SDRAM)
 				mem &= ~(0x00700000);
 		}
 		mem &= ~(0xcf80e000);	/* Turn off all undocumented bits. */
@@ -3572,7 +3582,7 @@ static int __init atyfb_atari_probe(void)
 		}
 
 		/* Fake pci_id for correct_chipset() */
-		switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) {
+		switch (aty_ld_le32(CNFG_CHIP_ID, par) & CFG_CHIP_TYPE) {
 		case 0x00d7:
 			par->pci_id = PCI_CHIP_MACH64GX;
 			break;
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index d0f1a7f..16bb7e3 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -1936,8 +1936,8 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo)
 	OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B);
 	mdelay(100);
 
-	aper_base = INREG(CONFIG_APER_0_BASE);
-	aper_size = INREG(CONFIG_APER_SIZE);
+	aper_base = INREG(CNFG_APER_0_BASE);
+	aper_size = INREG(CNFG_APER_SIZE);
 
 #ifdef SET_MC_FB_FROM_APERTURE
 	/* Set framebuffer to be at the same address as set in PCI BAR */
@@ -2024,11 +2024,11 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
                      ~CRTC_H_CUTOFF_ACTIVE_EN);
           }
         } else {
-          tmp = INREG(CONFIG_MEMSIZE);
+          tmp = INREG(CNFG_MEMSIZE);
         }
 
 	/* mem size is bits [28:0], mask off the rest */
-	rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK;
+	rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK;
 
 	/*
 	 * Hack to get around some busted production M6's
@@ -2228,7 +2228,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
 	 */
 	rinfo->errata = 0;
 	if (rinfo->family == CHIP_FAMILY_R300 &&
-	    (INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK)
+	    (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK)
 	    == CFG_ATI_REV_A11)
 		rinfo->errata |= CHIP_ERRATA_R300_CG;
 
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 675abda..ca5f0dc 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -333,7 +333,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 	if (!rinfo->has_CRTC2) {
                 tmp = INPLL(pllSCLK_CNTL);
 
-		if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
+		if ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
                     tmp &= ~(SCLK_CNTL__FORCE_CP	| SCLK_CNTL__FORCE_RB);
                 tmp &= ~(SCLK_CNTL__FORCE_HDP		| SCLK_CNTL__FORCE_DISP1 |
 			 SCLK_CNTL__FORCE_TOP		| SCLK_CNTL__FORCE_SE   |
@@ -468,9 +468,9 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 
 	/*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/
 	if ((rinfo->family == CHIP_FAMILY_RV250 &&
-	     ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
+	     ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
 	    ((rinfo->family == CHIP_FAMILY_RV100) &&
-	     ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
+	     ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
 		tmp |= SCLK_CNTL__FORCE_CP;
 		tmp |= SCLK_CNTL__FORCE_VIP;
 	}
@@ -486,7 +486,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 		/* RV200::A11 A12 RV250::A11 A12 */
 		if (((rinfo->family == CHIP_FAMILY_RV200) ||
 		     (rinfo->family == CHIP_FAMILY_RV250)) &&
-		    ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
+		    ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
 			tmp |= SCLK_MORE_CNTL__FORCEON;
 
 		OUTPLL(pllSCLK_MORE_CNTL, tmp);
@@ -497,7 +497,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 	/* RV200::A11 A12, RV250::A11 A12 */
 	if (((rinfo->family == CHIP_FAMILY_RV200) ||
 	     (rinfo->family == CHIP_FAMILY_RV250)) &&
-	    ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
+	    ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
 		tmp = INPLL(pllPLL_PWRMGT_CNTL);
 		tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE;
 		OUTPLL(pllPLL_PWRMGT_CNTL, tmp);
@@ -702,7 +702,7 @@ static void radeon_pm_restore_regs(struct radeonfb_info *rinfo)
 	OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
 	OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
 	OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 
 	OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
 	OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]);
@@ -1723,7 +1723,7 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo)
 	OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
 	OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
 	OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]);
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 	OUTREG(BUS_CNTL, rinfo->save_regs[36]);
 	OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
 	OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]);
@@ -1961,7 +1961,7 @@ static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo)
 	OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/);
 	OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/);
 	OUTREG(MC_IND_INDEX, 0);
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 
 	mdelay(20);
 }
@@ -2361,7 +2361,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
 	OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249);
 	OUTREG(MC_IND_INDEX, 0);
 
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 
 	radeon_pm_full_reset_sdram(rinfo);
 
@@ -2509,9 +2509,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
 
 static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 {
-	u16 pwr_cmd;
 	u32 tmp;
-	int i;
 
 	if (!rinfo->pm_reg)
 		return;
@@ -2557,32 +2555,14 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 			}
 		}
 
-		for (i = 0; i < 64; ++i)
-			pci_read_config_dword(rinfo->pdev, i * 4,
-					      &rinfo->cfg_save[i]);
-
 		/* Switch PCI power management to D2. */
 		pci_disable_device(rinfo->pdev);
-		for (;;) {
-			pci_read_config_word(
-				rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
-				&pwr_cmd);
-			if (pwr_cmd & 2)
-				break;			
-			pci_write_config_word(
-				rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
-				(pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
-			mdelay(500);
-		}
+		pci_save_state(rinfo->pdev);
+		pci_set_power_state(rinfo->pdev, PCI_D2);
 	} else {
 		printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
 		       pci_name(rinfo->pdev));
 
-		/* Switch back PCI powermanagment to D0 */
-		mdelay(200);
-		pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
-		mdelay(500);
-
 		if (rinfo->family <= CHIP_FAMILY_RV250) {
 			/* Reset the SDRAM controller  */
 			radeon_pm_full_reset_sdram(rinfo);
@@ -2598,37 +2578,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 	}
 }
 
-static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo)
-{
-	int i;
-	static u32 radeon_cfg_after_resume[64];
-
-	for (i = 0; i < 64; ++i)
-		pci_read_config_dword(rinfo->pdev, i * 4,
-				      &radeon_cfg_after_resume[i]);
-
-	if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4]
-	    == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4])
-		return 0;	/* assume everything is ok */
-
-	for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) {
-		if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i])
-			pci_write_config_dword(rinfo->pdev, i * 4,
-					       rinfo->cfg_save[i]);
-	}
-	pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE,
-			      rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]);
-	pci_write_config_word(rinfo->pdev, PCI_COMMAND,
-			      rinfo->cfg_save[PCI_COMMAND/4]);
-	return 1;
-}
-
-
 int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
         struct fb_info *info = pci_get_drvdata(pdev);
         struct radeonfb_info *rinfo = info->par;
-	int i;
 
 	if (mesg.event == pdev->dev.power.power_state.event)
 		return 0;
@@ -2674,6 +2627,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 	pmac_suspend_agp_for_card(pdev);
 #endif /* CONFIG_PPC_PMAC */
 
+	/* It's unclear whether or when the generic code will do that, so let's
+	 * do it ourselves. We save state before we do any power management
+	 */
+	pci_save_state(pdev);
+
 	/* If we support wakeup from poweroff, we save all regs we can including cfg
 	 * space
 	 */
@@ -2698,9 +2656,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 			mdelay(20);
 			OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
 		}
-		// FIXME: Use PCI layer
-		for (i = 0; i < 64; ++i)
-			pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
 		pci_disable_device(pdev);
 	}
 	/* If we support D2, we go to it (should be fixed later with a flag forcing
@@ -2717,6 +2672,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 	return 0;
 }
 
+static int radeon_check_power_loss(struct radeonfb_info *rinfo)
+{
+	return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) ||
+	       rinfo->save_regs[2] != INPLL(MCLK_CNTL) ||
+	       rinfo->save_regs[3] != INPLL(SCLK_CNTL);
+}
+
 int radeonfb_pci_resume(struct pci_dev *pdev)
 {
         struct fb_info *info = pci_get_drvdata(pdev);
@@ -2735,20 +2697,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 	printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
 	       pci_name(pdev), pdev->dev.power.power_state.event);
 
-
-	if (pci_enable_device(pdev)) {
-		rc = -ENODEV;
-		printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n",
-		       pci_name(pdev));
-		goto bail;
-	}
-	pci_set_master(pdev);
-
+	/* PCI state will have been restored by the core, so
+	 * we should be in D0 now with our config space fully
+	 * restored
+	 */
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		/* Wakeup chip. Check from config space if we were powered off
-		 * (todo: additionally, check CLK_PIN_CNTL too)
-		 */
-		if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) {
+		/* Wakeup chip */
+		if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) {
 			if (rinfo->reinit_func != NULL)
 				rinfo->reinit_func(rinfo);
 			else {
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index 3ea1b00..7351e66 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -361,8 +361,6 @@ struct radeonfb_info {
 #ifdef CONFIG_FB_RADEON_I2C
 	struct radeon_i2c_chan 	i2c[4];
 #endif
-
-	u32			cfg_save[64];
 };