diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2005-11-09 16:44:02 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-11-11 13:31:35 (GMT) |
commit | 62ff0d0a0769f08806d3f50449a78f17420971e8 (patch) | |
tree | 7a4908b104b68ffaf602d0659f73f1c315aa4b00 /drivers | |
parent | 7a33e45a2498460d6daa20a1740d3185798d6026 (diff) | |
download | linux-fsl-qoriq-62ff0d0a0769f08806d3f50449a78f17420971e8.tar.xz |
[PATCH] SAA9730: Whitespace cleanup.
Kill trailing whitespace, replace leading whitespace with tabs.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
drivers/net/saa9730.c | 98 +++++++++++++++++++++++++-------------------------
1 files changed, 49 insertions(+), 49 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/saa9730.c | 98 |
1 files changed, 49 insertions, 49 deletions
diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c index 110e777..451e78d2 100644 --- a/drivers/net/saa9730.c +++ b/drivers/net/saa9730.c @@ -23,9 +23,9 @@ * * Changes: * Angelo Dell'Aera <buffer@antifork.org> : Conversion to the new PCI API (pci_driver). - * Conversion to spinlocks. - * Error handling fixes. - * + * Conversion to spinlocks. + * Error handling fixes. + * */ #include <linux/init.h> @@ -52,7 +52,7 @@ int lan_saa9730_debug; static struct pci_device_id saa9730_pci_tbl[] = { { PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9370, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { 0, } }; @@ -61,7 +61,7 @@ MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl); /* Non-zero only if the current card is a PCI with BIOS-set IRQ. */ static unsigned int pci_irq_line; -#define INL(a) inl((unsigned long)a) +#define INL(a) inl((unsigned long)a) #define OUTL(x,a) outl(x,(unsigned long)a) static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp) @@ -221,8 +221,8 @@ static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp) unsigned int i, j, RcvBufferSize, TxmBufferSize; unsigned int buffer_start; - /* - * Allocate all RX and TX packets in one chunk. + /* + * Allocate all RX and TX packets in one chunk. * The Rx and Tx packets must be PACKET_SIZE aligned. */ mem_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) * @@ -234,7 +234,7 @@ static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp) if (!buffer_start) return -ENOMEM; - /* + /* * Set DMA buffer to kseg1 (uncached). * Make sure to flush before using it uncached. */ @@ -270,8 +270,8 @@ static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp) } } - /* - * Set rx buffer A and rx buffer B to point to the first two buffer + /* + * Set rx buffer A and rx buffer B to point to the first two buffer * spaces. */ OUTL(PHYSADDR(lp->RcvBuffer[0][0]), @@ -289,9 +289,9 @@ static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp) lp->PendingTxmPacketIndex = 0; lp->PendingTxmBufferIndex = 0; - /* + /* * Set txm_buf_a and txm_buf_b to point to the first two buffer - * space + * space */ OUTL(PHYSADDR(lp->TxmBuffer[0][0]), &lp->lan_saa9730_regs->TxBuffA); @@ -469,9 +469,9 @@ static int lan_saa9730_control_init(struct lan_saa9730_private *lp) OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC, &lp->lan_saa9730_regs->CamCtl); - /* + /* * Initialize CAM enable register, only turn on first entry, should - * contain own addr. + * contain own addr. */ OUTL(0x0001, &lp->lan_saa9730_regs->CamEnable); @@ -501,7 +501,7 @@ static int lan_saa9730_stop(struct lan_saa9730_private *lp) OUTL(INL(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET, &lp->lan_saa9730_regs->MacCtl); - /* + /* * Wait for MAC reset to have finished. The reset bit is auto cleared * when the reset is done. */ @@ -981,7 +981,7 @@ static void lan_saa9730_set_multicast(struct net_device *dev) CAM_CONTROL_BROAD_ACC, &lp->lan_saa9730_regs->CamCtl); } else { - /* + /* * Will handle the multicast stuff later. -carstenl */ } @@ -993,16 +993,16 @@ static void lan_saa9730_set_multicast(struct net_device *dev) static void __devexit saa9730_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); + struct net_device *dev = pci_get_drvdata(pdev); - if (dev) { - unregister_netdev(dev); + if (dev) { + unregister_netdev(dev); kfree(dev->priv); - free_netdev(dev); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - } + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + } } @@ -1016,14 +1016,14 @@ static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq) if (get_ethernet_addr(ethernet_addr)) return -ENODEV; - + memcpy(dev->dev_addr, ethernet_addr, 6); dev->base_addr = ioaddr; dev->irq = irq; - - /* - * Make certain the data structures used by the controller are aligned - * and DMAble. + + /* + * Make certain the data structures used by the controller are aligned + * and DMAble. */ /* * XXX: that is obviously broken - kfree() won't be happy with us. @@ -1053,9 +1053,9 @@ static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq) goto out; /* Stop LAN controller. */ - if ((ret = lan_saa9730_stop(lp))) + if ((ret = lan_saa9730_stop(lp))) goto out; - + /* Initialize CAM registers. */ if ((ret = lan_saa9730_cam_init(dev))) goto out; @@ -1065,19 +1065,19 @@ static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq) goto out; /* Initialize control registers. */ - if ((ret = lan_saa9730_control_init(lp))) + if ((ret = lan_saa9730_control_init(lp))) goto out; - + /* Load CAM registers. */ - if ((ret = lan_saa9730_cam_load(lp))) + if ((ret = lan_saa9730_cam_load(lp))) goto out; - + /* Initialize DMA context registers. */ if ((ret = lan_saa9730_dma_init(lp))) goto out; - + spin_lock_init(&lp->lock); - + dev->open = lan_saa9730_open; dev->hard_start_xmit = lan_saa9730_start_xmit; dev->stop = lan_saa9730_close; @@ -1086,7 +1086,7 @@ static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq) dev->tx_timeout = lan_saa9730_tx_timeout; dev->watchdog_timeo = (HZ >> 1); dev->dma = 0; - + ret = register_netdev(dev); if (ret) goto out; @@ -1115,10 +1115,10 @@ static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_dev SET_MODULE_OWNER(dev); err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR "Cannot enable PCI device, aborting.\n"); - goto out1; - } + if (err) { + printk(KERN_ERR "Cannot enable PCI device, aborting.\n"); + goto out1; + } err = pci_request_regions(pdev, DRV_MODULE_NAME); if (err) { @@ -1144,7 +1144,7 @@ static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_dev pci_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); return 0; - + out2: pci_disable_device(pdev); out1: @@ -1155,21 +1155,21 @@ out: static struct pci_driver saa9730_driver = { - .name = DRV_MODULE_NAME, - .id_table = saa9730_pci_tbl, - .probe = saa9730_init_one, - .remove = __devexit_p(saa9730_remove_one), + .name = DRV_MODULE_NAME, + .id_table = saa9730_pci_tbl, + .probe = saa9730_init_one, + .remove = __devexit_p(saa9730_remove_one), }; static int __init saa9730_init(void) { - return pci_module_init(&saa9730_driver); + return pci_module_init(&saa9730_driver); } static void __exit saa9730_cleanup(void) { - pci_unregister_driver(&saa9730_driver); + pci_unregister_driver(&saa9730_driver); } module_init(saa9730_init); |