diff options
author | Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> | 2008-02-04 02:51:04 (GMT) |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2008-02-29 20:19:35 (GMT) |
commit | d8ee398d183df36083e41e9162b0cf014f38f482 (patch) | |
tree | ee5c10f61aadd7ef8d78a06c3a48151b00ff0945 /drivers | |
parent | 406f2388cc1f6e6c176305bd325cef230ce1afdd (diff) | |
download | linux-fsl-qoriq-d8ee398d183df36083e41e9162b0cf014f38f482.tar.xz |
ath5k: Port to new bitrate/channel API
Author: Nick Kossifidis <mickflemm@gmail.com>
Tested on 5211, 5213+5112, 5213A+2112A and it wors fine.
Also i figured out a way to process rate vallue found
on status descriptors, it's still buggy but we are getting
closer (i think it improved stability a little).
Changes to hw.c, initvals.c, phy.c
Changes-licensed-under: ISC
Changes to ath5k.h, base.c, base.h
Changes-licensed-under: 3-Clause-BSD
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/Kconfig | 1 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/ath5k.h | 100 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/base.c | 346 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/base.h | 14 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/hw.c | 170 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/initvals.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/phy.c | 66 |
8 files changed, 329 insertions, 372 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index cd5fcc6..714a6ca 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -735,7 +735,6 @@ config P54_PCI config ATH5K tristate "Atheros 5xxx wireless cards support" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL - depends on BROKEN ---help--- This module adds support for wireless adapters based on Atheros 5xxx chipset. diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile index 321641f..ada1095 100644 --- a/drivers/net/wireless/ath5k/Makefile +++ b/drivers/net/wireless/ath5k/Makefile @@ -1,2 +1,2 @@ -ath5k-objs = base.o hw.o regdom.o initvals.o phy.o debug.o +ath5k-objs = base.o hw.o initvals.o phy.o debug.o obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index 69dea33..9ea8c54 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -30,7 +30,6 @@ #include <net/mac80211.h> #include "hw.h" -#include "regdom.h" /* PCI IDs */ #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ @@ -251,18 +250,20 @@ struct ath5k_srev_name { */ #define MODULATION_TURBO 0x00000080 -enum ath5k_vendor_mode { - MODE_ATHEROS_TURBO = NUM_IEEE80211_MODES+1, - MODE_ATHEROS_TURBOG +enum ath5k_driver_mode { + AR5K_MODE_11A = 0, + AR5K_MODE_11A_TURBO = 1, + AR5K_MODE_11B = 2, + AR5K_MODE_11G = 3, + AR5K_MODE_11G_TURBO = 4, + AR5K_MODE_XR = 0, + AR5K_MODE_MAX = 5 }; -/* Number of supported mac80211 enum ieee80211_phymode modes by this driver */ -#define NUM_DRIVER_MODES 3 - /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ #define AR5K_SET_SHORT_PREAMBLE 0x04 -#define HAS_SHPREAMBLE(_ix) (rt->rates[_ix].modulation == IEEE80211_RATE_CCK_2) +#define HAS_SHPREAMBLE(_ix) (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE) #define SHPREAMBLE_FLAG(_ix) (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0) /****************\ @@ -560,8 +561,8 @@ struct ath5k_desc { * Used internaly in OpenHAL (ar5211.c/ar5212.c * for reset_tx_queue). Also see struct struct ieee80211_channel. */ -#define IS_CHAN_XR(_c) ((_c.val & CHANNEL_XR) != 0) -#define IS_CHAN_B(_c) ((_c.val & CHANNEL_B) != 0) +#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) +#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) /* * The following structure will be used to map 2GHz channels to @@ -584,7 +585,7 @@ struct ath5k_athchan_2ghz { /** * struct ath5k_rate - rate structure - * @valid: is this a valid rate for the current mode + * @valid: is this a valid rate for rate control (remove) * @modulation: respective mac80211 modulation * @rate_kbps: rate in kbit/s * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on @@ -643,47 +644,48 @@ struct ath5k_rate_table { /* * Rate tables... + * TODO: CLEAN THIS !!! */ #define AR5K_RATES_11A { 8, { \ 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 0 }, \ - { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 0 }, \ - { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 2 }, \ - { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 2 }, \ - { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 4 }, \ - { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 4 }, \ - { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 4 }, \ - { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 4 } } \ + { 1, 0, 6000, 11, 140, 0 }, \ + { 1, 0, 9000, 15, 18, 0 }, \ + { 1, 0, 12000, 10, 152, 2 }, \ + { 1, 0, 18000, 14, 36, 2 }, \ + { 1, 0, 24000, 9, 176, 4 }, \ + { 1, 0, 36000, 13, 72, 4 }, \ + { 1, 0, 48000, 8, 96, 4 }, \ + { 1, 0, 54000, 12, 108, 4 } } \ } #define AR5K_RATES_11B { 4, { \ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, IEEE80211_RATE_CCK, 1000, 27, 130, 0 }, \ - { 1, IEEE80211_RATE_CCK_2, 2000, 26, 132, 1 }, \ - { 1, IEEE80211_RATE_CCK_2, 5500, 25, 139, 1 }, \ - { 1, IEEE80211_RATE_CCK_2, 11000, 24, 150, 1 } } \ + { 1, 0, 1000, 27, 130, 0 }, \ + { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \ + { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \ + { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \ } #define AR5K_RATES_11G { 12, { \ 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \ 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, IEEE80211_RATE_CCK, 1000, 27, 2, 0 }, \ - { 1, IEEE80211_RATE_CCK_2, 2000, 26, 4, 1 }, \ - { 1, IEEE80211_RATE_CCK_2, 5500, 25, 11, 1 }, \ - { 1, IEEE80211_RATE_CCK_2, 11000, 24, 22, 1 }, \ - { 0, IEEE80211_RATE_OFDM, 6000, 11, 12, 4 }, \ - { 0, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \ - { 1, IEEE80211_RATE_OFDM, 12000, 10, 24, 6 }, \ - { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \ - { 1, IEEE80211_RATE_OFDM, 24000, 9, 48, 8 }, \ - { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \ - { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \ - { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \ + { 1, 0, 1000, 27, 2, 0 }, \ + { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \ + { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \ + { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \ + { 0, 0, 6000, 11, 12, 4 }, \ + { 0, 0, 9000, 15, 18, 4 }, \ + { 1, 0, 12000, 10, 24, 6 }, \ + { 1, 0, 18000, 14, 36, 6 }, \ + { 1, 0, 24000, 9, 48, 8 }, \ + { 1, 0, 36000, 13, 72, 8 }, \ + { 1, 0, 48000, 8, 96, 8 }, \ + { 1, 0, 54000, 12, 108, 8 } } \ } #define AR5K_RATES_TURBO { 8, { \ @@ -708,14 +710,14 @@ struct ath5k_rate_table { { 1, MODULATION_XR, 1000, 2, 139, 1 }, \ { 1, MODULATION_XR, 2000, 6, 150, 2 }, \ { 1, MODULATION_XR, 3000, 1, 150, 3 }, \ - { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 4 }, \ - { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \ - { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 6 }, \ - { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \ - { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 8 }, \ - { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \ - { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \ - { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \ + { 1, 0, 6000, 11, 140, 4 }, \ + { 1, 0, 9000, 15, 18, 4 }, \ + { 1, 0, 12000, 10, 152, 6 }, \ + { 1, 0, 18000, 14, 36, 6 }, \ + { 1, 0, 24000, 9, 176, 8 }, \ + { 1, 0, 36000, 13, 72, 8 }, \ + { 1, 0, 48000, 8, 96, 8 }, \ + { 1, 0, 54000, 12, 108, 8 } } \ } /* @@ -895,7 +897,7 @@ struct ath5k_capabilities { * Supported PHY modes * (ie. CHANNEL_A, CHANNEL_B, ...) */ - DECLARE_BITMAP(cap_mode, NUM_DRIVER_MODES); + DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); /* * Frequency range (without regulation restrictions) @@ -908,14 +910,6 @@ struct ath5k_capabilities { } cap_range; /* - * Active regulation domain settings - */ - struct { - enum ath5k_regdom reg_current; - enum ath5k_regdom reg_hw; - } cap_regdomain; - - /* * Values stored in the EEPROM (some of them...) */ struct ath5k_eeprom_info cap_eeprom; @@ -1129,8 +1123,6 @@ extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); -/* Regulatory Domain/Channels Setup */ -extern u16 ath5k_get_regdomain(struct ath5k_hw *ah); /* Misc functions */ extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index bef967c..52e55f6 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -240,6 +240,8 @@ static int ath5k_chan_set(struct ath5k_softc *sc, static void ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode); static void ath5k_mode_setup(struct ath5k_softc *sc); +static void ath5k_set_total_hw_rates(struct ath5k_softc *sc); + /* Descriptor setup */ static int ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev); @@ -515,12 +517,12 @@ ath5k_pci_probe(struct pci_dev *pdev, /* Single chip radio (!RF5111) */ if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) { /* No 5GHz support -> report 2GHz radio */ - if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){ + if(!test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)){ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision), sc->ah->ah_radio_5ghz_revision); /* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */ - } else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){ + } else if(!test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)){ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision), sc->ah->ah_radio_5ghz_revision); @@ -693,11 +695,14 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) goto err; } + /* Set *_rates so we can map hw rate index */ + ath5k_set_total_hw_rates(sc); + /* NB: setup here so ath5k_rate_update is happy */ - if (test_bit(MODE_IEEE80211A, ah->ah_modes)) - ath5k_setcurmode(sc, MODE_IEEE80211A); + if (test_bit(AR5K_MODE_11A, ah->ah_modes)) + ath5k_setcurmode(sc, AR5K_MODE_11A); else - ath5k_setcurmode(sc, MODE_IEEE80211B); + ath5k_setcurmode(sc, AR5K_MODE_11B); /* * Allocate tx+rx descriptors and populate the lists. @@ -837,12 +842,9 @@ ath5k_copy_rates(struct ieee80211_rate *rates, return 0; for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) { - if (!rt->rates[i].valid) - continue; - rates->rate = rt->rates[i].rate_kbps / 100; - rates->val = rt->rates[i].rate_code; - rates->flags = rt->rates[i].modulation; - rates++; + rates[count].bitrate = rt->rates[i].rate_kbps / 100; + rates[count].hw_value = rt->rates[i].rate_code; + rates[count].flags = rt->rates[i].modulation; count++; max--; } @@ -856,43 +858,22 @@ ath5k_copy_channels(struct ath5k_hw *ah, unsigned int mode, unsigned int max) { - static const struct { unsigned int mode, mask, chan; } map[] = { - [MODE_IEEE80211A] = { CHANNEL_OFDM, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_A }, - [MODE_ATHEROS_TURBO] = { CHANNEL_OFDM|CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_T }, - [MODE_IEEE80211B] = { CHANNEL_CCK, CHANNEL_CCK, CHANNEL_B }, - [MODE_IEEE80211G] = { CHANNEL_OFDM, CHANNEL_OFDM, CHANNEL_G }, - [MODE_ATHEROS_TURBOG] = { CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_TG }, - }; - static const struct ath5k_regchannel chans_2ghz[] = - IEEE80211_CHANNELS_2GHZ; - static const struct ath5k_regchannel chans_5ghz[] = - IEEE80211_CHANNELS_5GHZ; - const struct ath5k_regchannel *chans; - enum ath5k_regdom dmn; - unsigned int i, count, size, chfreq, all, f, ch; + unsigned int i, count, size, chfreq, freq, ch; if (!test_bit(mode, ah->ah_modes)) return 0; - all = ah->ah_regdomain == DMN_DEFAULT || CHAN_DEBUG == 1; - switch (mode) { - case MODE_IEEE80211A: - case MODE_ATHEROS_TURBO: + case AR5K_MODE_11A: + case AR5K_MODE_11A_TURBO: /* 1..220, but 2GHz frequencies are filtered by check_channel */ - size = all ? 220 : ARRAY_SIZE(chans_5ghz); - chans = chans_5ghz; - dmn = ath5k_regdom2flag(ah->ah_regdomain, - IEEE80211_CHANNELS_5GHZ_MIN); + size = 220 ; chfreq = CHANNEL_5GHZ; break; - case MODE_IEEE80211B: - case MODE_IEEE80211G: - case MODE_ATHEROS_TURBOG: - size = all ? 26 : ARRAY_SIZE(chans_2ghz); - chans = chans_2ghz; - dmn = ath5k_regdom2flag(ah->ah_regdomain, - IEEE80211_CHANNELS_2GHZ_MIN); + case AR5K_MODE_11B: + case AR5K_MODE_11G: + case AR5K_MODE_11G_TURBO: + size = 26; chfreq = CHANNEL_2GHZ; break; default: @@ -901,25 +882,26 @@ ath5k_copy_channels(struct ath5k_hw *ah, } for (i = 0, count = 0; i < size && max > 0; i++) { - ch = all ? i + 1 : chans[i].chan; - f = ath5k_ieee2mhz(ch); - /* Check if channel is supported by the chipset */ - if (!ath5k_channel_ok(ah, f, chfreq)) - continue; + ch = i + 1 ; + freq = ath5k_ieee2mhz(ch); - /* Match regulation domain */ - if (!all && !(IEEE80211_DMN(chans[i].domain) & - IEEE80211_DMN(dmn))) + /* Check if channel is supported by the chipset */ + if (!ath5k_channel_ok(ah, freq, chfreq)) continue; - if (!all && (chans[i].mode & map[mode].mask) != map[mode].mode) - continue; + /* Write channel info and increment counter */ + channels[count].center_freq = freq; + + if((mode == AR5K_MODE_11A) || + (mode == AR5K_MODE_11G)){ + channels[count].hw_value = chfreq|CHANNEL_OFDM; + } else if((mode == AR5K_MODE_11A_TURBO) || + (mode == AR5K_MODE_11G_TURBO)){ + channels[count].hw_value = chfreq|CHANNEL_OFDM|CHANNEL_TURBO; + }if(mode == AR5K_MODE_11B) { + channels[count].hw_value = CHANNEL_B; + } - /* Write channel and increment counter */ - channels->chan = ch; - channels->freq = f; - channels->val = map[mode].chan; - channels++; count++; max--; } @@ -927,95 +909,76 @@ ath5k_copy_channels(struct ath5k_hw *ah, return count; } -/* Only tries to register modes our EEPROM says it can support */ -#define REGISTER_MODE(m) do { \ - ret = ath5k_register_mode(hw, m); \ - if (ret) \ - return ret; \ -} while (0) \ - -static inline int -ath5k_register_mode(struct ieee80211_hw *hw, u8 m) +static int +ath5k_getchannels(struct ieee80211_hw *hw) { struct ath5k_softc *sc = hw->priv; - struct ieee80211_hw_mode *modes = sc->modes; - unsigned int i; - int ret; + struct ath5k_hw *ah = sc->ah; + struct ieee80211_supported_band *sbands = sc->sbands; + const struct ath5k_rate_table *hw_rates; + unsigned int max_r, max_c, count_r, count_c; + int mode2g = AR5K_MODE_11G; - if (!test_bit(m, sc->ah->ah_capabilities.cap_mode)) - return 0; + BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS); - for (i = 0; i < NUM_DRIVER_MODES; i++) { - if (modes[i].mode != m || !modes[i].num_channels) - continue; - ret = ieee80211_register_hwmode(hw, &modes[i]); - if (ret) { - ATH5K_ERR(sc, "can't register hwmode %u\n", m); - return ret; + max_r = ARRAY_SIZE(sc->rates); + max_c = ARRAY_SIZE(sc->channels); + count_r = count_c = 0; + + /* 2GHz band */ + if(!test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)){ + mode2g = AR5K_MODE_11B; + if(!test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)){ + mode2g = -1; } - return 0; } - BUG(); -} -static int -ath5k_getchannels(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ieee80211_hw_mode *modes = sc->modes; - unsigned int i, max_r, max_c; - int ret; + if(mode2g > 0){ + struct ieee80211_supported_band *sband = &sbands[IEEE80211_BAND_2GHZ]; - BUILD_BUG_ON(ARRAY_SIZE(sc->modes) < 3); + sband->bitrates = sc->rates; + sband->channels = sc->channels; - /* The order here does not matter */ - modes[0].mode = MODE_IEEE80211G; - modes[1].mode = MODE_IEEE80211B; - modes[2].mode = MODE_IEEE80211A; + sband->band = IEEE80211_BAND_2GHZ; + sband->n_channels = ath5k_copy_channels(ah, sband->channels, + mode2g, max_c); - max_r = ARRAY_SIZE(sc->rates); - max_c = ARRAY_SIZE(sc->channels); + hw_rates = ath5k_hw_get_rate_table(ah, mode2g); + sband->n_bitrates = ath5k_copy_rates(sband->bitrates, + hw_rates,max_r); - for (i = 0; i < NUM_DRIVER_MODES; i++) { - struct ieee80211_hw_mode *mode = &modes[i]; - const struct ath5k_rate_table *hw_rates; + count_c = sband->n_channels; + count_r = sband->n_bitrates; - if (i == 0) { - modes[0].rates = sc->rates; - modes->channels = sc->channels; - } else { - struct ieee80211_hw_mode *prev_mode = &modes[i-1]; - int prev_num_r = prev_mode->num_rates; - int prev_num_c = prev_mode->num_channels; - mode->rates = &prev_mode->rates[prev_num_r]; - mode->channels = &prev_mode->channels[prev_num_c]; - } + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; + + max_r -= count_r; + max_c -= count_c; - hw_rates = ath5k_hw_get_rate_table(ah, mode->mode); - mode->num_rates = ath5k_copy_rates(mode->rates, hw_rates, - max_r); - mode->num_channels = ath5k_copy_channels(ah, mode->channels, - mode->mode, max_c); - max_r -= mode->num_rates; - max_c -= mode->num_channels; } - /* We try to register all modes this driver supports. We don't bother - * with MODE_IEEE80211B for AR5212 as MODE_IEEE80211G already accounts - * for that as per mac80211. Then, REGISTER_MODE() will will actually - * check the eeprom reading for more reliable capability information. - * Order matters here as per mac80211's latest preference. This will - * all hopefullly soon go away. */ + /* 5GHz band */ - REGISTER_MODE(MODE_IEEE80211G); - if (ah->ah_version != AR5K_AR5212) - REGISTER_MODE(MODE_IEEE80211B); - REGISTER_MODE(MODE_IEEE80211A); + if(test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)){ + struct ieee80211_supported_band *sband = &sbands[IEEE80211_BAND_5GHZ]; - ath5k_debug_dump_modes(sc, modes); + sband->bitrates = &sc->rates[count_r]; + sband->channels = &sc->channels[count_c]; - return ret; + sband->band = IEEE80211_BAND_5GHZ; + sband->n_channels = ath5k_copy_channels(ah, sband->channels, + AR5K_MODE_11A, max_c); + + hw_rates = ath5k_hw_get_rate_table(ah, AR5K_MODE_11A); + sband->n_bitrates = ath5k_copy_rates(sband->bitrates, + hw_rates,max_r); + + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband; + } + +/* FIXME: ath5k_debug_dump_modes(sc, modes); */ + + return 0; } /* @@ -1030,11 +993,15 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) struct ath5k_hw *ah = sc->ah; int ret; - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "%u (%u MHz) -> %u (%u MHz)\n", - sc->curchan->chan, sc->curchan->freq, - chan->chan, chan->freq); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n", + sc->curchan->center_freq, chan->center_freq); + + if (chan->center_freq != sc->curchan->center_freq || + chan->hw_value != sc->curchan->hw_value) { + + sc->curchan = chan; + sc->curband = &sc->sbands[chan->band]; - if (chan->freq != sc->curchan->freq || chan->val != sc->curchan->val) { /* * To switch channels clear any pending DMA operations; * wait long enough for the RX fifo to drain, reset the @@ -1044,13 +1011,13 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) ath5k_hw_set_intr(ah, 0); /* disable interrupts */ ath5k_txq_cleanup(sc); /* clear pending tx frames */ ath5k_rx_stop(sc); /* turn off frame recv */ - ret = ath5k_hw_reset(ah, sc->opmode, chan, true); + ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); if (ret) { - ATH5K_ERR(sc, "%s: unable to reset channel %u " - "(%u Mhz)\n", __func__, chan->chan, chan->freq); + ATH5K_ERR(sc, "%s: unable to reset channel " + "(%u Mhz)\n", __func__, chan->center_freq); return ret; } - sc->curchan = chan; + ath5k_hw_set_txpower_limit(sc->ah, 0); /* @@ -1081,6 +1048,9 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) return 0; } +/* + * TODO: CLEAN THIS !!! + */ static void ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) { @@ -1121,10 +1091,6 @@ ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) continue; } sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD; - if (SHPREAMBLE_FLAG(ix) || rt->rates[ix].modulation == - IEEE80211_RATE_OFDM) - sc->hwmap[i].txflags |= - IEEE80211_RADIOTAP_F_SHORTPRE; /* receive frames include FCS */ sc->hwmap[i].rxflags = sc->hwmap[i].txflags | IEEE80211_RADIOTAP_F_FCS; @@ -1142,6 +1108,12 @@ ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) } sc->curmode = mode; + + if(mode == AR5K_MODE_11A){ + sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ]; + } else { + sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ]; + } } static void @@ -1164,6 +1136,72 @@ ath5k_mode_setup(struct ath5k_softc *sc) ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } +/* + * Match the hw provided rate index (through descriptors) + * to an index for sc->curband->bitrates, so it can be used + * by the stack. + * + * This one is a little bit tricky but i think i'm right + * about this... + * + * We have 4 rate tables in the following order: + * XR (4 rates) + * 802.11a (8 rates) + * 802.11b (4 rates) + * 802.11g (12 rates) + * that make the hw rate table. + * + * Lets take a 5211 for example that supports a and b modes only. + * First comes the 802.11a table and then 802.11b (total 12 rates). + * When hw returns eg. 11 it points to the last 802.11b rate (11Mbit), + * if it returns 2 it points to the second 802.11a rate etc. + * + * Same goes for 5212 who has xr/a/b/g support (total 28 rates). + * First comes the XR table, then 802.11a, 802.11b and 802.11g. + * When hw returns eg. 27 it points to the last 802.11g rate (54Mbits) etc + */ +static void +ath5k_set_total_hw_rates(struct ath5k_softc *sc){ + + struct ath5k_hw *ah = sc->ah; + + if(test_bit(AR5K_MODE_11A, ah->ah_modes)) + sc->a_rates = 8; + + if(test_bit(AR5K_MODE_11B, ah->ah_modes)) + sc->b_rates = 4; + + if(test_bit(AR5K_MODE_11G, ah->ah_modes)) + sc->g_rates = 12; + + /* XXX: Need to see what what happens when + xr disable bits in eeprom are set */ + if(ah->ah_version >= AR5K_AR5212) + sc->xr_rates = 4; + +} + +static inline int +ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix){ + + int mac80211_rix; + + if(sc->curband->band == IEEE80211_BAND_2GHZ){ + /* We setup a g ratetable for both b/g modes */ + mac80211_rix = hw_rix - sc->b_rates - sc->a_rates - sc->xr_rates; + } else { + mac80211_rix = hw_rix - sc->xr_rates; + } + + /* Something went wrong, fallback to basic rate for this band */ + if((mac80211_rix >= sc->curband->n_bitrates) || + (mac80211_rix <= 0 )){ + mac80211_rix = 1; + } + + return mac80211_rix; +} + @@ -1268,7 +1306,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, ret = ah->ah_setup_tx_desc(ah, ds, pktlen, ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, - (ctl->power_level * 2), ctl->tx_rate, ctl->retry_limit, keyidx, 0, flags, 0, 0); + (sc->power_level * 2), ctl->tx_rate->hw_value, ctl->retry_limit, keyidx, 0, flags, 0, 0); if (ret) goto err_unmap; @@ -1791,9 +1829,8 @@ accept: rxs.mactime = ath5k_extend_tsf(sc->ah, ds->ds_rxstat.rs_tstamp); rxs.flag |= RX_FLAG_TSFT; - rxs.freq = sc->curchan->freq; - rxs.channel = sc->curchan->chan; - rxs.phymode = sc->curmode; + rxs.freq = sc->curchan->center_freq; + rxs.band = sc->curband->band; /* * signal quality: @@ -1811,7 +1848,7 @@ accept: rxs.signal = ds->ds_rxstat.rs_rssi * 100 / 64; rxs.antenna = ds->ds_rxstat.rs_antenna; - rxs.rate = ds->ds_rxstat.rs_rate; + rxs.rate_idx = ath5k_hw_to_driver_rix(sc,ds->ds_rxstat.rs_rate); rxs.flag |= ath5k_rx_decrypted(sc, ds, skb); ath5k_debug_dump_skb(sc, skb, "RX ", 0); @@ -1958,7 +1995,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, ds->ds_data = bf->skbaddr; ret = ah->ah_setup_tx_desc(ah, ds, skb->len, ieee80211_get_hdrlen_from_skb(skb), - AR5K_PKT_TYPE_BEACON, (ctl->power_level * 2), ctl->tx_rate, 1, + AR5K_PKT_TYPE_BEACON, (sc->power_level * 2), ctl->tx_rate->hw_value, 1, AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0); if (ret) goto err_unmap; @@ -2211,7 +2248,8 @@ ath5k_init(struct ath5k_softc *sc) * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ - sc->curchan = sc->hw->conf.chan; + sc->curchan = sc->hw->conf.channel; + sc->curband = &sc->sbands[sc->curchan->band]; ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false); if (ret) { ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret); @@ -2448,7 +2486,7 @@ ath5k_calibrate(unsigned long data) struct ath5k_hw *ah = sc->ah; ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", - sc->curchan->chan, sc->curchan->val); + ieee80211_frequency_to_channel(sc->curchan->center_freq), sc->curchan->hw_value); if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) { /* @@ -2460,7 +2498,7 @@ ath5k_calibrate(unsigned long data) } if (ath5k_hw_phy_calibrate(ah, sc->curchan)) ATH5K_ERR(sc, "calibration of channel %u failed\n", - sc->curchan->chan); + ieee80211_frequency_to_channel(sc->curchan->center_freq)); mod_timer(&sc->calib_tim, round_jiffies(jiffies + msecs_to_jiffies(ath5k_calinterval * 1000))); @@ -2558,7 +2596,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb, memmove(skb->data, skb->data+pad, hdrlen); } - sc->led_txrate = ctl->tx_rate; + sc->led_txrate = ctl->tx_rate->hw_value; spin_lock_irqsave(&sc->txbuflock, flags); if (list_empty(&sc->txbuf)) { @@ -2597,11 +2635,6 @@ ath5k_reset(struct ieee80211_hw *hw) int ret; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - /* - * Convert to a hw channel description with the flags - * constrained to reflect the current operating mode. - */ - sc->curchan = hw->conf.chan; ath5k_hw_set_intr(ah, 0); ath5k_txq_cleanup(sc); @@ -2692,6 +2725,9 @@ end: mutex_unlock(&sc->lock); } +/* + * TODO: Phy disable/diversity etc + */ static int ath5k_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) @@ -2699,9 +2735,9 @@ ath5k_config(struct ieee80211_hw *hw, struct ath5k_softc *sc = hw->priv; sc->bintval = conf->beacon_int; - ath5k_setcurmode(sc, conf->phymode); + sc->power_level = conf->power_level; - return ath5k_chan_set(sc, conf->chan); + return ath5k_chan_set(sc, conf->channel); } static int diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 8287ae7..bbe7a54 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -83,7 +83,7 @@ struct ath5k_txq { #if CHAN_DEBUG #define ATH_CHAN_MAX (26+26+26+200+200) #else -#define ATH_CHAN_MAX (14+14+14+252+20) /* XXX what's the max? */ +#define ATH_CHAN_MAX (14+14+14+252+20) #endif /* Software Carrier, keeps track of the driver state @@ -95,12 +95,19 @@ struct ath5k_softc { struct ieee80211_tx_queue_stats tx_stats; struct ieee80211_low_level_stats ll_stats; struct ieee80211_hw *hw; /* IEEE 802.11 common */ - struct ieee80211_hw_mode modes[NUM_DRIVER_MODES]; + struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; struct ieee80211_channel channels[ATH_CHAN_MAX]; - struct ieee80211_rate rates[AR5K_MAX_RATES * NUM_DRIVER_MODES]; + struct ieee80211_rate rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS]; enum ieee80211_if_types opmode; struct ath5k_hw *ah; /* Atheros HW */ + struct ieee80211_supported_band *curband; + + u8 a_rates; + u8 b_rates; + u8 g_rates; + u8 xr_rates; + #if ATH5K_DEBUG struct ath5k_dbg_info debug; /* debug info */ #endif @@ -169,6 +176,7 @@ struct ath5k_softc { unsigned int nexttbtt; /* next beacon time in TU */ struct timer_list calib_tim; /* calibration timer */ + int power_level; /* Requested tx power in dbm */ }; #define ath5k_hw_hasbssidmask(_ah) \ diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index c2de2d9..998da6b 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -140,9 +140,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) * HW information */ - /* Get reg domain from eeprom */ - ath5k_get_regdomain(ah); - ah->ah_op_mode = IEEE80211_IF_TYPE_STA; ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; ah->ah_turbo = false; @@ -405,15 +402,15 @@ const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, /* Get rate tables */ switch (mode) { - case MODE_IEEE80211A: + case AR5K_MODE_11A: return &ath5k_rt_11a; - case MODE_ATHEROS_TURBO: + case AR5K_MODE_11A_TURBO: return &ath5k_rt_turbo; - case MODE_IEEE80211B: + case AR5K_MODE_11B: return &ath5k_rt_11b; - case MODE_IEEE80211G: + case AR5K_MODE_11G: return &ath5k_rt_11g; - case MODE_ATHEROS_TURBOG: + case AR5K_MODE_11G_TURBO: return &ath5k_rt_xr; } @@ -457,15 +454,15 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, ds_coef_exp, ds_coef_man, clock; if (!(ah->ah_version == AR5K_AR5212) || - !(channel->val & CHANNEL_OFDM)) + !(channel->hw_value & CHANNEL_OFDM)) BUG(); /* Seems there are two PLLs, one for baseband sampling and one * for tuning. Tuning basebands are 40 MHz or 80MHz when in * turbo. */ - clock = channel->val & CHANNEL_TURBO ? 80 : 40; + clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; coef_scaled = ((5 * (clock << 24)) / 2) / - channel->freq; + channel->center_freq; for (coef_exp = 31; coef_exp > 0; coef_exp--) if ((coef_scaled >> coef_exp) & 0x1) @@ -492,8 +489,7 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, * ath5k_hw_write_rate_duration - set rate duration during hw resets * * @ah: the &struct ath5k_hw - * @driver_mode: one of enum ieee80211_phymode or our one of our own - * vendor modes + * @mode: one of enum ath5k_driver_mode * * Write the rate duration table for the current mode upon hw reset. This * is a helper for ath5k_hw_reset(). It seems all this is doing is setting @@ -504,19 +500,20 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, * */ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, - unsigned int driver_mode) + unsigned int mode) { struct ath5k_softc *sc = ah->ah_sc; const struct ath5k_rate_table *rt; + struct ieee80211_rate srate = {}; unsigned int i; /* Get rate table for the current operating mode */ - rt = ath5k_hw_get_rate_table(ah, - driver_mode); + rt = ath5k_hw_get_rate_table(ah, mode); /* Write rate duration table */ for (i = 0; i < rt->rate_count; i++) { const struct ath5k_rate *rate, *control_rate; + u32 reg; u16 tx_time; @@ -526,6 +523,8 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, /* Set ACK timeout */ reg = AR5K_RATE_DUR(rate->rate_code); + srate.bitrate = control_rate->rate_kbps/100; + /* An ACK frame consists of 10 bytes. If you add the FCS, * which ieee80211_generic_frame_duration() adds, * its 14 bytes. Note we use the control rate and not the @@ -533,7 +532,7 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, * ieee80211_duration() for a brief description of * what rate we should choose to TX ACKs. */ tx_time = ieee80211_generic_frame_duration(sc->hw, - sc->vif, 10, control_rate->rate_kbps/100); + sc->vif, 10, &srate); ath5k_hw_reg_write(ah, tx_time, reg); @@ -567,7 +566,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 data, s_seq, s_ant, s_led[3]; - unsigned int i, mode, freq, ee_mode, ant[2], driver_mode = -1; + unsigned int i, mode, freq, ee_mode, ant[2]; int ret; ATH5K_TRACE(ah->ah_sc); @@ -602,7 +601,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, /*Wakeup the device*/ - ret = ath5k_hw_nic_wakeup(ah, channel->val, false); + ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); if (ret) return ret; @@ -624,37 +623,32 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, return -EINVAL; } - switch (channel->val & CHANNEL_MODES) { + switch (channel->hw_value & CHANNEL_MODES) { case CHANNEL_A: - mode = AR5K_INI_VAL_11A; + mode = AR5K_MODE_11A; freq = AR5K_INI_RFGAIN_5GHZ; ee_mode = AR5K_EEPROM_MODE_11A; - driver_mode = MODE_IEEE80211A; break; case CHANNEL_G: - mode = AR5K_INI_VAL_11G; + mode = AR5K_MODE_11G; freq = AR5K_INI_RFGAIN_2GHZ; ee_mode = AR5K_EEPROM_MODE_11G; - driver_mode = MODE_IEEE80211G; break; case CHANNEL_B: - mode = AR5K_INI_VAL_11B; + mode = AR5K_MODE_11B; freq = AR5K_INI_RFGAIN_2GHZ; ee_mode = AR5K_EEPROM_MODE_11B; - driver_mode = MODE_IEEE80211B; break; case CHANNEL_T: - mode = AR5K_INI_VAL_11A_TURBO; + mode = AR5K_MODE_11A_TURBO; freq = AR5K_INI_RFGAIN_5GHZ; ee_mode = AR5K_EEPROM_MODE_11A; - driver_mode = MODE_ATHEROS_TURBO; break; /*Is this ok on 5211 too ?*/ case CHANNEL_TG: - mode = AR5K_INI_VAL_11G_TURBO; + mode = AR5K_MODE_11G_TURBO; freq = AR5K_INI_RFGAIN_2GHZ; ee_mode = AR5K_EEPROM_MODE_11G; - driver_mode = MODE_ATHEROS_TURBOG; break; case CHANNEL_XR: if (ah->ah_version == AR5K_AR5211) { @@ -662,14 +656,13 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, "XR mode not available on 5211"); return -EINVAL; } - mode = AR5K_INI_VAL_XR; + mode = AR5K_MODE_XR; freq = AR5K_INI_RFGAIN_5GHZ; ee_mode = AR5K_EEPROM_MODE_11A; - driver_mode = MODE_IEEE80211A; break; default: ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->freq); + "invalid channel: %d\n", channel->center_freq); return -EINVAL; } @@ -702,7 +695,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, if (ah->ah_version > AR5K_AR5211){ /* found on 5213+ */ ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11)); - if (channel->val == CHANNEL_G) + if (channel->hw_value == CHANNEL_G) ath5k_hw_reg_write(ah, 0x00f80d80, AR5K_PHY(83)); /* 0x00fc0ec0 */ else ath5k_hw_reg_write(ah, 0x00000000, AR5K_PHY(83)); @@ -720,7 +713,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, AR5K_SREV_RAD_5112A) { ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, AR5K_PHY_CCKTXCTL); - if (channel->val & CHANNEL_5GHZ) + if (channel->hw_value & CHANNEL_5GHZ) data = 0xffb81020; else data = 0xffb80d20; @@ -740,7 +733,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, * mac80211 are integrated */ if (ah->ah_version == AR5K_AR5212 && ah->ah_sc->vif != NULL) - ath5k_hw_write_rate_duration(ah, driver_mode); + ath5k_hw_write_rate_duration(ah, mode); /* * Write RF registers @@ -756,7 +749,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, /* Write OFDM timings on 5212*/ if (ah->ah_version == AR5K_AR5212 && - channel->val & CHANNEL_OFDM) { + channel->hw_value & CHANNEL_OFDM) { ret = ath5k_hw_write_ofdm_timings(ah, channel); if (ret) return ret; @@ -765,7 +758,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, /*Enable/disable 802.11b mode on 5111 (enable 2111 frequency converter + CCK)*/ if (ah->ah_radio == AR5K_RF5111) { - if (driver_mode == MODE_IEEE80211B) + if (mode == AR5K_MODE_11B) AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_B_MODE); else @@ -903,7 +896,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, if (ah->ah_version != AR5K_AR5210) { data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & AR5K_PHY_RX_DELAY_M; - data = (channel->val & CHANNEL_CCK) ? + data = (channel->hw_value & CHANNEL_CCK) ? ((data << 2) / 22) : (data / 10); udelay(100 + data); @@ -920,11 +913,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL, 0, false)) { ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", - channel->freq); + channel->center_freq); return -EAGAIN; } - ret = ath5k_hw_noise_floor_calibration(ah, channel->freq); + ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); if (ret) return ret; @@ -932,7 +925,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, /* A and G modes can use QAM modulation which requires enabling * I and Q calibration. Don't bother in B mode. */ - if (!(driver_mode == MODE_IEEE80211B)) { + if (!(mode == AR5K_MODE_11B)) { ah->ah_calibration = true; AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); @@ -1590,9 +1583,10 @@ static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) /* * Write to eeprom - currently disabled, use at your own risk */ +#if 0 static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data) { -#if 0 + u32 status, timeout; ATH5K_TRACE(ah->ah_sc); @@ -1634,10 +1628,11 @@ static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data) } udelay(15); } -#endif + ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!"); return -EIO; } +#endif /* * Translate binary channel representation in EEPROM to frequency @@ -2043,50 +2038,6 @@ static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) } /* - * Read/Write regulatory domain - */ -static bool ath5k_eeprom_regulation_domain(struct ath5k_hw *ah, bool write, - enum ath5k_regdom *regdomain) -{ - u16 ee_regdomain; - - /* Read current value */ - if (write != true) { - ee_regdomain = ah->ah_capabilities.cap_eeprom.ee_regdomain; - *regdomain = ath5k_regdom_to_ieee(ee_regdomain); - return true; - } - - ee_regdomain = ath5k_regdom_from_ieee(*regdomain); - - /* Try to write a new value */ - if (ah->ah_capabilities.cap_eeprom.ee_protect & - AR5K_EEPROM_PROTECT_WR_128_191) - return false; - if (ath5k_hw_eeprom_write(ah, AR5K_EEPROM_REG_DOMAIN, ee_regdomain)!=0) - return false; - - ah->ah_capabilities.cap_eeprom.ee_regdomain = ee_regdomain; - - return true; -} - -/* - * Use the above to write a new regulatory domain - */ -int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain) -{ - enum ath5k_regdom ieee_regdomain; - - ieee_regdomain = ath5k_regdom_to_ieee(regdomain); - - if (ath5k_eeprom_regulation_domain(ah, true, &ieee_regdomain) == true) - return 0; - - return -EIO; -} - -/* * Fill the capabilities struct */ static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) @@ -2108,8 +2059,8 @@ static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) ah->ah_capabilities.cap_range.range_2ghz_max = 0; /* Set supported modes */ - __set_bit(MODE_IEEE80211A, ah->ah_capabilities.cap_mode); - __set_bit(MODE_ATHEROS_TURBO, ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); } else { /* * XXX The tranceiver supports frequencies from 4920 to 6100GHz @@ -2131,12 +2082,12 @@ static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) ah->ah_capabilities.cap_range.range_5ghz_max = 6100; /* Set supported modes */ - __set_bit(MODE_IEEE80211A, + __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); - __set_bit(MODE_ATHEROS_TURBO, + __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); if (ah->ah_version == AR5K_AR5212) - __set_bit(MODE_ATHEROS_TURBOG, + __set_bit(AR5K_MODE_11G_TURBO, ah->ah_capabilities.cap_mode); } @@ -2148,11 +2099,11 @@ static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) ah->ah_capabilities.cap_range.range_2ghz_max = 2732; if (AR5K_EEPROM_HDR_11B(ee_header)) - __set_bit(MODE_IEEE80211B, + __set_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode); if (AR5K_EEPROM_HDR_11G(ee_header)) - __set_bit(MODE_IEEE80211G, + __set_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode); } } @@ -4248,35 +4199,6 @@ void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, } -/*********************************\ - Regulatory Domain/Channels Setup -\*********************************/ - -u16 ath5k_get_regdomain(struct ath5k_hw *ah) -{ - u16 regdomain; - enum ath5k_regdom ieee_regdomain; -#ifdef COUNTRYCODE - u16 code; -#endif - - ath5k_eeprom_regulation_domain(ah, false, &ieee_regdomain); - ah->ah_capabilities.cap_regdomain.reg_hw = ieee_regdomain; - -#ifdef COUNTRYCODE - /* - * Get the regulation domain by country code. This will ignore - * the settings found in the EEPROM. - */ - code = ieee80211_name2countrycode(COUNTRYCODE); - ieee_regdomain = ieee80211_countrycode2regdomain(code); -#endif - - regdomain = ath5k_regdom_from_ieee(ieee_regdomain); - ah->ah_capabilities.cap_regdomain.reg_current = regdomain; - - return regdomain; -} /****************\ diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index 2c22f1d..a255d8b 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -1317,7 +1317,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) /* For AR5211 */ } else if (ah->ah_version == AR5K_AR5211) { - if(mode > 2){ /* AR5K_INI_VAL_11B */ + if(mode > 2){ /* AR5K_MODE_11B */ ATH5K_ERR(ah->ah_sc,"unsupported channel mode: %d\n", mode); return -EINVAL; } diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index b959417..8b576b3 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1018,7 +1018,7 @@ static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah, int obdb = -1, bank = -1; u32 ee_mode; - AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX); + AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); rf = ah->ah_rf_banks; @@ -1038,8 +1038,8 @@ static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah, } /* Modify bank 0 */ - if (channel->val & CHANNEL_2GHZ) { - if (channel->val & CHANNEL_CCK) + if (channel->hw_value & CHANNEL_2GHZ) { + if (channel->hw_value & CHANNEL_CCK) ee_mode = AR5K_EEPROM_MODE_11B; else ee_mode = AR5K_EEPROM_MODE_11G; @@ -1058,10 +1058,10 @@ static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah, } else { /* For 11a, Turbo and XR */ ee_mode = AR5K_EEPROM_MODE_11A; - obdb = channel->freq >= 5725 ? 3 : - (channel->freq >= 5500 ? 2 : - (channel->freq >= 5260 ? 1 : - (channel->freq > 4000 ? 0 : -1))); + obdb = channel->center_freq >= 5725 ? 3 : + (channel->center_freq >= 5500 ? 2 : + (channel->center_freq >= 5260 ? 1 : + (channel->center_freq > 4000 ? 0 : -1))); if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], ee->ee_pwd_84, 1, 51, 3, true)) @@ -1119,12 +1119,12 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah, int obdb = -1, bank = -1; u32 ee_mode; - AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX); + AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); rf = ah->ah_rf_banks; if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_2112A - && !test_bit(MODE_IEEE80211A, ah->ah_capabilities.cap_mode)){ + && !test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)){ rf_ini = rfregs_2112a; rf_size = ARRAY_SIZE(rfregs_5112a); if (mode < 2) { @@ -1156,8 +1156,8 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah, } /* Modify bank 6 */ - if (channel->val & CHANNEL_2GHZ) { - if (channel->val & CHANNEL_OFDM) + if (channel->hw_value & CHANNEL_2GHZ) { + if (channel->hw_value & CHANNEL_OFDM) ee_mode = AR5K_EEPROM_MODE_11G; else ee_mode = AR5K_EEPROM_MODE_11B; @@ -1173,10 +1173,10 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah, } else { /* For 11a, Turbo and XR */ ee_mode = AR5K_EEPROM_MODE_11A; - obdb = channel->freq >= 5725 ? 3 : - (channel->freq >= 5500 ? 2 : - (channel->freq >= 5260 ? 1 : - (channel->freq > 4000 ? 0 : -1))); + obdb = channel->center_freq >= 5725 ? 3 : + (channel->center_freq >= 5500 ? 2 : + (channel->center_freq >= 5260 ? 1 : + (channel->center_freq > 4000 ? 0 : -1))); if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], ee->ee_ob[ee_mode][obdb], 3, 279, 0, true)) @@ -1219,7 +1219,7 @@ static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah, unsigned int rf_size, i; int bank = -1; - AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX); + AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); rf = ah->ah_rf_banks; @@ -1445,7 +1445,7 @@ static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) * newer chipsets like the AR5212A who have a completely * different RF/PHY part. */ - athchan = (ath5k_hw_bitswap((channel->chan - 24) / 2, 5) << 1) | + athchan = (ath5k_hw_bitswap((ieee80211_frequency_to_channel(channel->center_freq) - 24) / 2, 5) << 1) | (1 << 6) | 0x1; return athchan; @@ -1506,7 +1506,7 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { struct ath5k_athchan_2ghz ath5k_channel_2ghz; - unsigned int ath5k_channel = channel->chan; + unsigned int ath5k_channel = ieee80211_frequency_to_channel(channel->center_freq); u32 data0, data1, clock; int ret; @@ -1515,9 +1515,9 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, */ data0 = data1 = 0; - if (channel->val & CHANNEL_2GHZ) { + if (channel->hw_value & CHANNEL_2GHZ) { /* Map 2GHz channel to 5GHz Atheros channel ID */ - ret = ath5k_hw_rf5111_chan2athchan(channel->chan, + ret = ath5k_hw_rf5111_chan2athchan(ieee80211_frequency_to_channel(channel->center_freq), &ath5k_channel_2ghz); if (ret) return ret; @@ -1555,7 +1555,7 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, u16 c; data = data0 = data1 = data2 = 0; - c = channel->freq; + c = channel->center_freq; /* * Set the channel on the RF5112 or newer @@ -1604,13 +1604,13 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) * Check bounds supported by the PHY * (don't care about regulation restrictions at this point) */ - if ((channel->freq < ah->ah_capabilities.cap_range.range_2ghz_min || - channel->freq > ah->ah_capabilities.cap_range.range_2ghz_max) && - (channel->freq < ah->ah_capabilities.cap_range.range_5ghz_min || - channel->freq > ah->ah_capabilities.cap_range.range_5ghz_max)) { + if ((channel->center_freq < ah->ah_capabilities.cap_range.range_2ghz_min || + channel->center_freq > ah->ah_capabilities.cap_range.range_2ghz_max) && + (channel->center_freq < ah->ah_capabilities.cap_range.range_5ghz_min || + channel->center_freq > ah->ah_capabilities.cap_range.range_5ghz_max)) { ATH5K_ERR(ah->ah_sc, "channel out of supported range (%u MHz)\n", - channel->freq); + channel->center_freq); return -EINVAL; } @@ -1632,9 +1632,9 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) if (ret) return ret; - ah->ah_current_channel.freq = channel->freq; - ah->ah_current_channel.val = channel->val; - ah->ah_turbo = channel->val == CHANNEL_T ? true : false; + ah->ah_current_channel.center_freq = channel->center_freq; + ah->ah_current_channel.hw_value = channel->hw_value; + ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false; return 0; } @@ -1797,11 +1797,11 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, if (ret) { ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", - channel->freq); + channel->center_freq); return ret; } - ret = ath5k_hw_noise_floor_calibration(ah, channel->freq); + ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); if (ret) return ret; @@ -1848,10 +1848,10 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S)); done: - ath5k_hw_noise_floor_calibration(ah, channel->freq); + ath5k_hw_noise_floor_calibration(ah, channel->center_freq); /* Request RF gain */ - if (channel->val & CHANNEL_5GHZ) { + if (channel->hw_value & CHANNEL_5GHZ) { ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max, AR5K_PHY_PAPD_PROBE_TXPOWER) | AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); |