diff options
| -rw-r--r-- | drivers/net/wireless/libertas/if_sdio.c | 206 |
1 files changed, 121 insertions, 85 deletions
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 6590feb..76caeba 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -117,6 +117,8 @@ struct if_sdio_card { int model; unsigned long ioport; unsigned int scratch_reg; + bool started; + wait_queue_head_t pwron_waitq; u8 buffer[65536] __attribute__((aligned(4))); @@ -129,6 +131,9 @@ struct if_sdio_card { u8 rx_unit; }; +static void if_sdio_finish_power_on(struct if_sdio_card *card); +static int if_sdio_power_off(struct if_sdio_card *card); + /********************************************************************/ /* I/O */ /********************************************************************/ @@ -669,12 +674,39 @@ out: return ret; } +static void if_sdio_do_prog_firmware(struct lbs_private *priv, int ret, + const struct firmware *helper, + const struct firmware *mainfw) +{ + struct if_sdio_card *card = priv->card; + + if (ret) { + pr_err("failed to find firmware (%d)\n", ret); + return; + } + + ret = if_sdio_prog_helper(card, helper); + if (ret) + goto out; + + lbs_deb_sdio("Helper firmware loaded\n"); + + ret = if_sdio_prog_real(card, mainfw); + if (ret) + goto out; + + lbs_deb_sdio("Firmware loaded\n"); + if_sdio_finish_power_on(card); + +out: + release_firmware(helper); + release_firmware(mainfw); +} + static int if_sdio_prog_firmware(struct if_sdio_card *card) { int ret; u16 scratch; - const struct firmware *helper = NULL; - const struct firmware *mainfw = NULL; lbs_deb_enter(LBS_DEB_SDIO); @@ -708,41 +740,18 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card) */ if (scratch == IF_SDIO_FIRMWARE_OK) { lbs_deb_sdio("firmware already loaded\n"); - goto success; + if_sdio_finish_power_on(card); + return 0; } else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) { lbs_deb_sdio("firmware may be running\n"); - goto success; - } - - ret = lbs_get_firmware(&card->func->dev, card->model, &fw_table[0], - &helper, &mainfw); - if (ret) { - pr_err("failed to find firmware (%d)\n", ret); - goto out; + if_sdio_finish_power_on(card); + return 0; } - ret = if_sdio_prog_helper(card, helper); - if (ret) - goto out; - - lbs_deb_sdio("Helper firmware loaded\n"); - - ret = if_sdio_prog_real(card, mainfw); - if (ret) - goto out; - - lbs_deb_sdio("Firmware loaded\n"); - -success: - sdio_claim_host(card->func); - sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE); - sdio_release_host(card->func); - ret = 0; + ret = lbs_get_firmware_async(card->priv, &card->func->dev, card->model, + fw_table, if_sdio_do_prog_firmware); out: - release_firmware(helper); - release_firmware(mainfw); - lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); return ret; } @@ -751,55 +760,15 @@ out: /* Power management */ /********************************************************************/ -static int if_sdio_power_on(struct if_sdio_card *card) +/* Finish power on sequence (after firmware is loaded) */ +static void if_sdio_finish_power_on(struct if_sdio_card *card) { struct sdio_func *func = card->func; struct lbs_private *priv = card->priv; - struct mmc_host *host = func->card->host; int ret; sdio_claim_host(func); - - ret = sdio_enable_func(func); - if (ret) - goto release; - - /* For 1-bit transfers to the 8686 model, we need to enable the - * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 - * bit to allow access to non-vendor registers. */ - if ((card->model == MODEL_8686) && - (host->caps & MMC_CAP_SDIO_IRQ) && - (host->ios.bus_width == MMC_BUS_WIDTH_1)) { - u8 reg; - - func->card->quirks |= MMC_QUIRK_LENIENT_FN0; - reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret); - if (ret) - goto disable; - - reg |= SDIO_BUS_ECSI; - sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret); - if (ret) - goto disable; - } - - card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret); - if (ret) - goto disable; - - card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8; - if (ret) - goto disable; - - card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16; - if (ret) - goto disable; - - sdio_release_host(func); - ret = if_sdio_prog_firmware(card); - sdio_claim_host(func); - if (ret) - goto disable; + sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE); /* * Get rx_unit if the chip is SD8688 or newer. @@ -824,7 +793,7 @@ static int if_sdio_power_on(struct if_sdio_card *card) */ ret = sdio_claim_irq(func, if_sdio_interrupt); if (ret) - goto disable; + goto release; /* * Enable interrupts now that everything is set up @@ -850,11 +819,79 @@ static int if_sdio_power_on(struct if_sdio_card *card) } priv->fw_ready = 1; + wake_up(&card->pwron_waitq); - return 0; + if (!card->started) { + ret = lbs_start_card(priv); + if_sdio_power_off(card); + if (ret == 0) { + card->started = true; + /* Tell PM core that we don't need the card to be + * powered now */ + pm_runtime_put_noidle(&func->dev); + } + } + + return; release_irq: sdio_release_irq(func); +release: + sdio_release_host(func); +} + +static int if_sdio_power_on(struct if_sdio_card *card) +{ + struct sdio_func *func = card->func; + struct mmc_host *host = func->card->host; + int ret; + + sdio_claim_host(func); + + ret = sdio_enable_func(func); + if (ret) + goto release; + + /* For 1-bit transfers to the 8686 model, we need to enable the + * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 + * bit to allow access to non-vendor registers. */ + if ((card->model == MODEL_8686) && + (host->caps & MMC_CAP_SDIO_IRQ) && + (host->ios.bus_width == MMC_BUS_WIDTH_1)) { + u8 reg; + + func->card->quirks |= MMC_QUIRK_LENIENT_FN0; + reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret); + if (ret) + goto disable; + + reg |= SDIO_BUS_ECSI; + sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret); + if (ret) + goto disable; + } + + card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret); + if (ret) + goto disable; + + card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8; + if (ret) + goto disable; + + card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16; + if (ret) + goto disable; + + sdio_release_host(func); + ret = if_sdio_prog_firmware(card); + if (ret) { + sdio_disable_func(func); + return ret; + } + + return 0; + disable: sdio_disable_func(func); release: @@ -1061,11 +1098,17 @@ static int if_sdio_power_save(struct lbs_private *priv) static int if_sdio_power_restore(struct lbs_private *priv) { struct if_sdio_card *card = priv->card; + int r; /* Make sure the card will not be powered off by runtime PM */ pm_runtime_get_sync(&card->func->dev); - return if_sdio_power_on(card); + r = if_sdio_power_on(card); + if (r) + return r; + + wait_event(card->pwron_waitq, priv->fw_ready); + return 0; } @@ -1166,6 +1209,7 @@ static int if_sdio_probe(struct sdio_func *func, spin_lock_init(&card->lock); card->workqueue = create_workqueue("libertas_sdio"); INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker); + init_waitqueue_head(&card->pwron_waitq); /* Check if we support this card */ for (i = 0; i < ARRAY_SIZE(fw_table); i++) { @@ -1207,14 +1251,6 @@ static int if_sdio_probe(struct sdio_func *func, if (ret) goto err_activate_card; - ret = lbs_start_card(priv); - if_sdio_power_off(card); - if (ret) - goto err_activate_card; - - /* Tell PM core that we don't need the card to be powered now */ - pm_runtime_put_noidle(&func->dev); - out: lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |