summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c76
-rw-r--r--arch/avr32/kernel/avr32_ksyms.c2
-rw-r--r--arch/avr32/kernel/process.c7
-rw-r--r--arch/avr32/kernel/setup.c24
-rw-r--r--arch/avr32/lib/delay.c2
-rw-r--r--arch/avr32/mach-at32ap/at32ap7000.c182
-rw-r--r--arch/avr32/mach-at32ap/extint.c22
-rw-r--r--arch/avr32/mach-at32ap/intc.c4
-rw-r--r--arch/avr32/mach-at32ap/pio.c85
-rw-r--r--arch/avr32/mach-at32ap/sm.c289
-rw-r--r--include/asm-avr32/arch-at32ap/at32ap7000.h33
-rw-r--r--include/asm-avr32/arch-at32ap/board.h3
-rw-r--r--include/asm-avr32/arch-at32ap/portmux.h20
-rw-r--r--include/asm-avr32/dma-mapping.h12
14 files changed, 341 insertions, 420 deletions
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index cced73c..32b361f 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -7,20 +7,83 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/setup.h>
#include <asm/arch/board.h>
#include <asm/arch/init.h>
-struct eth_platform_data __initdata eth0_data = {
- .valid = 1,
- .mii_phy_addr = 0x10,
- .is_rmii = 0,
- .hw_addr = { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb },
+struct eth_addr {
+ u8 addr[6];
};
+static struct eth_addr __initdata hw_addr[2];
+
+static struct eth_platform_data __initdata eth_data[2];
extern struct lcdc_platform_data atstk1000_fb0_data;
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+ int i;
+
+ i = tag->u.ethernet.mac_index;
+ if (i < ARRAY_SIZE(hw_addr))
+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+ sizeof(hw_addr[i].addr));
+
+ return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const u8 *addr;
+ void __iomem *regs;
+ struct clk *pclk;
+
+ if (!res)
+ return;
+ if (pdev->id >= ARRAY_SIZE(hw_addr))
+ return;
+
+ addr = hw_addr[pdev->id].addr;
+ if (!is_valid_ether_addr(addr))
+ return;
+
+ /*
+ * Since this is board-specific code, we'll cheat and use the
+ * physical address directly as we happen to know that it's
+ * the same as the virtual address.
+ */
+ regs = (void __iomem __force *)res->start;
+ pclk = clk_get(&pdev->dev, "pclk");
+ if (!pclk)
+ return;
+
+ clk_enable(pclk);
+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
+ | (addr[1] << 8) | addr[0], regs + 0x98);
+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+ clk_disable(pclk);
+ clk_put(pclk);
+}
+
void __init setup_board(void)
{
at32_map_usart(1, 0); /* /dev/ttyS0 */
@@ -38,7 +101,8 @@ static int __init atstk1002_init(void)
at32_add_device_usart(1);
at32_add_device_usart(2);
- at32_add_device_eth(0, &eth0_data);
+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+
at32_add_device_spi(0);
at32_add_device_lcdc(0, &atstk1000_fb0_data);
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 372e3f8..7c4c761 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -7,12 +7,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <asm/checksum.h>
#include <asm/uaccess.h>
-#include <asm/delay.h>
/*
* GCC functions
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 317dc50..0b43259 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -38,6 +38,13 @@ void cpu_idle(void)
void machine_halt(void)
{
+ /*
+ * Enter Stop mode. The 32 kHz oscillator will keep running so
+ * the RTC will keep the time properly and the system will
+ * boot quickly.
+ */
+ asm volatile("sleep 3\n\t"
+ "sub pc, -2");
}
void machine_power_off(void)
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index ea2d1ff..a342116 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -229,30 +229,6 @@ static int __init parse_tag_rsvd_mem(struct tag *tag)
}
__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-#if 0
- const struct platform_device *pdev;
-
- /*
- * We really need a bus type that supports "classes"...this
- * will do for now (until we must handle other kinds of
- * ethernet controllers)
- */
- pdev = platform_get_device("macb", tag->u.ethernet.mac_index);
- if (pdev && pdev->dev.platform_data) {
- struct eth_platform_data *data = pdev->dev.platform_data;
-
- data->valid = 1;
- data->mii_phy_addr = tag->u.ethernet.mii_phy_addr;
- memcpy(data->hw_addr, tag->u.ethernet.hw_address,
- sizeof(data->hw_addr));
- }
-#endif
- return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
/*
* Scan the tag table for this tag, and call its parse function. The
* tag table is built by the linker from all the __tagtable
diff --git a/arch/avr32/lib/delay.c b/arch/avr32/lib/delay.c
index 462c830..b3bc0b5 100644
--- a/arch/avr32/lib/delay.c
+++ b/arch/avr32/lib/delay.c
@@ -12,9 +12,9 @@
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/param.h>
#include <linux/types.h>
-#include <asm/delay.h>
#include <asm/processor.h>
#include <asm/sysreg.h>
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index 7ff6ad8..48f4ef3 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -11,6 +11,7 @@
#include <asm/io.h>
+#include <asm/arch/at32ap7000.h>
#include <asm/arch/board.h>
#include <asm/arch/portmux.h>
#include <asm/arch/sm.h>
@@ -57,6 +58,9 @@ static struct platform_device _name##_id##_device = { \
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
}
+#define select_peripheral(pin, periph, flags) \
+ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+
#define DEV_CLK(_name, devname, bus, _index) \
static struct clk devname##_##_name = { \
.name = #_name, \
@@ -67,18 +71,6 @@ static struct clk devname##_##_name = { \
.index = _index, \
}
-enum {
- PIOA,
- PIOB,
- PIOC,
- PIOD,
-};
-
-enum {
- FUNC_A,
- FUNC_B,
-};
-
unsigned long at32ap7000_osc_rates[3] = {
[0] = 32768,
/* FIXME: these are ATSTK1002-specific */
@@ -569,26 +561,26 @@ DEV_CLK(usart, atmel_usart3, pba, 6);
static inline void configure_usart0_pins(void)
{
- portmux_set_func(PIOA, 8, FUNC_B); /* RXD */
- portmux_set_func(PIOA, 9, FUNC_B); /* TXD */
+ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
+ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
}
static inline void configure_usart1_pins(void)
{
- portmux_set_func(PIOA, 17, FUNC_A); /* RXD */
- portmux_set_func(PIOA, 18, FUNC_A); /* TXD */
+ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
+ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
}
static inline void configure_usart2_pins(void)
{
- portmux_set_func(PIOB, 26, FUNC_B); /* RXD */
- portmux_set_func(PIOB, 27, FUNC_B); /* TXD */
+ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
+ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
}
static inline void configure_usart3_pins(void)
{
- portmux_set_func(PIOB, 18, FUNC_B); /* RXD */
- portmux_set_func(PIOB, 17, FUNC_B); /* TXD */
+ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
+ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
}
static struct platform_device *at32_usarts[4];
@@ -654,6 +646,15 @@ DEFINE_DEV_DATA(macb, 0);
DEV_CLK(hclk, macb0, hsb, 8);
DEV_CLK(pclk, macb0, pbb, 6);
+static struct eth_platform_data macb1_data;
+static struct resource macb1_resource[] = {
+ PBMEM(0xfff01c00),
+ IRQ(26),
+};
+DEFINE_DEV_DATA(macb, 1);
+DEV_CLK(hclk, macb1, hsb, 9);
+DEV_CLK(pclk, macb1, pbb, 7);
+
struct platform_device *__init
at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
{
@@ -663,27 +664,54 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
case 0:
pdev = &macb0_device;
- portmux_set_func(PIOC, 3, FUNC_A); /* TXD0 */
- portmux_set_func(PIOC, 4, FUNC_A); /* TXD1 */
- portmux_set_func(PIOC, 7, FUNC_A); /* TXEN */
- portmux_set_func(PIOC, 8, FUNC_A); /* TXCK */
- portmux_set_func(PIOC, 9, FUNC_A); /* RXD0 */
- portmux_set_func(PIOC, 10, FUNC_A); /* RXD1 */
- portmux_set_func(PIOC, 13, FUNC_A); /* RXER */
- portmux_set_func(PIOC, 15, FUNC_A); /* RXDV */
- portmux_set_func(PIOC, 16, FUNC_A); /* MDC */
- portmux_set_func(PIOC, 17, FUNC_A); /* MDIO */
+ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
+ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
+ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
+ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
+ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
+ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
+ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
+ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
+ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
+ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
+
+ if (!data->is_rmii) {
+ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
+ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
+ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
+ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
+ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
+ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
+ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
+ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
+ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
+ }
+ break;
+
+ case 1:
+ pdev = &macb1_device;
+
+ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
+ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
+ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
+ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
+ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
+ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
+ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
+ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
+ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
+ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
if (!data->is_rmii) {
- portmux_set_func(PIOC, 0, FUNC_A); /* COL */
- portmux_set_func(PIOC, 1, FUNC_A); /* CRS */
- portmux_set_func(PIOC, 2, FUNC_A); /* TXER */
- portmux_set_func(PIOC, 5, FUNC_A); /* TXD2 */
- portmux_set_func(PIOC, 6, FUNC_A); /* TXD3 */
- portmux_set_func(PIOC, 11, FUNC_A); /* RXD2 */
- portmux_set_func(PIOC, 12, FUNC_A); /* RXD3 */
- portmux_set_func(PIOC, 14, FUNC_A); /* RXCK */
- portmux_set_func(PIOC, 18, FUNC_A); /* SPD */
+ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
+ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
+ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
+ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
+ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
+ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
+ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
+ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
+ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
}
break;
@@ -714,12 +742,12 @@ struct platform_device *__init at32_add_device_spi(unsigned int id)
switch (id) {
case 0:
pdev = &spi0_device;
- portmux_set_func(PIOA, 0, FUNC_A); /* MISO */
- portmux_set_func(PIOA, 1, FUNC_A); /* MOSI */
- portmux_set_func(PIOA, 2, FUNC_A); /* SCK */
- portmux_set_func(PIOA, 3, FUNC_A); /* NPCS0 */
- portmux_set_func(PIOA, 4, FUNC_A); /* NPCS1 */
- portmux_set_func(PIOA, 5, FUNC_A); /* NPCS2 */
+ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+ select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */
+ select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */
+ select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */
break;
default:
@@ -762,37 +790,37 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
switch (id) {
case 0:
pdev = &lcdc0_device;
- portmux_set_func(PIOC, 19, FUNC_A); /* CC */
- portmux_set_func(PIOC, 20, FUNC_A); /* HSYNC */
- portmux_set_func(PIOC, 21, FUNC_A); /* PCLK */
- portmux_set_func(PIOC, 22, FUNC_A); /* VSYNC */
- portmux_set_func(PIOC, 23, FUNC_A); /* DVAL */
- portmux_set_func(PIOC, 24, FUNC_A); /* MODE */
- portmux_set_func(PIOC, 25, FUNC_A); /* PWR */
- portmux_set_func(PIOC, 26, FUNC_A); /* DATA0 */
- portmux_set_func(PIOC, 27, FUNC_A); /* DATA1 */
- portmux_set_func(PIOC, 28, FUNC_A); /* DATA2 */
- portmux_set_func(PIOC, 29, FUNC_A); /* DATA3 */
- portmux_set_func(PIOC, 30, FUNC_A); /* DATA4 */
- portmux_set_func(PIOC, 31, FUNC_A); /* DATA5 */
- portmux_set_func(PIOD, 0, FUNC_A); /* DATA6 */
- portmux_set_func(PIOD, 1, FUNC_A); /* DATA7 */
- portmux_set_func(PIOD, 2, FUNC_A); /* DATA8 */
- portmux_set_func(PIOD, 3, FUNC_A); /* DATA9 */
- portmux_set_func(PIOD, 4, FUNC_A); /* DATA10 */
- portmux_set_func(PIOD, 5, FUNC_A); /* DATA11 */
- portmux_set_func(PIOD, 6, FUNC_A); /* DATA12 */
- portmux_set_func(PIOD, 7, FUNC_A); /* DATA13 */
- portmux_set_func(PIOD, 8, FUNC_A); /* DATA14 */
- portmux_set_func(PIOD, 9, FUNC_A); /* DATA15 */
- portmux_set_func(PIOD, 10, FUNC_A); /* DATA16 */
- portmux_set_func(PIOD, 11, FUNC_A); /* DATA17 */
- portmux_set_func(PIOD, 12, FUNC_A); /* DATA18 */
- portmux_set_func(PIOD, 13, FUNC_A); /* DATA19 */
- portmux_set_func(PIOD, 14, FUNC_A); /* DATA20 */
- portmux_set_func(PIOD, 15, FUNC_A); /* DATA21 */
- portmux_set_func(PIOD, 16, FUNC_A); /* DATA22 */
- portmux_set_func(PIOD, 17, FUNC_A); /* DATA23 */
+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
clk_set_parent(&lcdc0_pixclk, &pll0);
clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
@@ -838,6 +866,8 @@ struct clk *at32_clock_list[] = {
&atmel_usart3_usart,
&macb0_hclk,
&macb0_pclk,
+ &macb1_hclk,
+ &macb1_pclk,
&spi0_mck,
&lcdc0_hclk,
&lcdc0_pixclk,
diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
index 4dff1f9..b59272e 100644
--- a/arch/avr32/mach-at32ap/extint.c
+++ b/arch/avr32/mach-at32ap/extint.c
@@ -49,12 +49,25 @@ static void eim_unmask_irq(unsigned int irq)
static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
{
struct at32_sm *sm = get_irq_chip_data(irq);
+ struct irq_desc *desc;
unsigned int i = irq - sm->eim_first_irq;
u32 mode, edge, level;
unsigned long flags;
int ret = 0;
- flow_type &= IRQ_TYPE_SENSE_MASK;
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ desc = &irq_desc[irq];
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+
+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ desc->status |= IRQ_LEVEL;
+ set_irq_handler(irq, handle_level_irq);
+ } else {
+ set_irq_handler(irq, handle_edge_irq);
+ }
spin_lock_irqsave(&sm->lock, flags);
@@ -148,10 +161,15 @@ static int __init eim_init(void)
pattern = sm_readl(sm, EIM_MODE);
nr_irqs = fls(pattern);
+ /* Trigger on falling edge unless overridden by driver */
+ sm_writel(sm, EIM_MODE, 0UL);
+ sm_writel(sm, EIM_EDGE, 0UL);
+
sm->eim_chip = &eim_chip;
for (i = 0; i < nr_irqs; i++) {
- set_irq_chip(sm->eim_first_irq + i, &eim_chip);
+ set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
+ handle_edge_irq);
set_irq_chip_data(sm->eim_first_irq + i, sm);
}
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index eb87a18..dd5c009 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -136,3 +136,7 @@ fail:
panic("Interrupt controller initialization failed!\n");
}
+unsigned long intc_get_pending(int group)
+{
+ return intc_readl(&intc0, INTREQ0 + 4 * group);
+}
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index d3aabfc..f1280ed 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -25,27 +25,98 @@ struct pio_device {
void __iomem *regs;
const struct platform_device *pdev;
struct clk *clk;
- u32 alloc_mask;
+ u32 pinmux_mask;
char name[32];
};
static struct pio_device pio_dev[MAX_NR_PIO_DEVICES];
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
- unsigned int function_id)
+static struct pio_device *gpio_to_pio(unsigned int gpio)
{
struct pio_device *pio;
- u32 mask = 1 << pin_id;
+ unsigned int index;
- BUG_ON(portmux_id >= MAX_NR_PIO_DEVICES);
+ index = gpio >> 5;
+ if (index >= MAX_NR_PIO_DEVICES)
+ return NULL;
+ pio = &pio_dev[index];
+ if (!pio->regs)
+ return NULL;
- pio = &pio_dev[portmux_id];
+ return pio;
+}
+
+/* Pin multiplexing API */
+
+void __init at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags)
+{
+ struct pio_device *pio;
+ unsigned int pin_index = pin & 0x1f;
+ u32 mask = 1 << pin_index;
+
+ pio = gpio_to_pio(pin);
+ if (unlikely(!pio)) {
+ printk("pio: invalid pin %u\n", pin);
+ goto fail;
+ }
- if (function_id)
+ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+ printk("%s: pin %u is busy\n", pio->name, pin_index);
+ goto fail;
+ }
+
+ pio_writel(pio, PUER, mask);
+ if (periph)
pio_writel(pio, BSR, mask);
else
pio_writel(pio, ASR, mask);
+
pio_writel(pio, PDR, mask);
+ if (!(flags & AT32_GPIOF_PULLUP))
+ pio_writel(pio, PUDR, mask);
+
+ return;
+
+fail:
+ dump_stack();
+}
+
+void __init at32_select_gpio(unsigned int pin, unsigned long flags)
+{
+ struct pio_device *pio;
+ unsigned int pin_index = pin & 0x1f;
+ u32 mask = 1 << pin_index;
+
+ pio = gpio_to_pio(pin);
+ if (unlikely(!pio)) {
+ printk("pio: invalid pin %u\n", pin);
+ goto fail;
+ }
+
+ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+ printk("%s: pin %u is busy\n", pio->name, pin_index);
+ goto fail;
+ }
+
+ pio_writel(pio, PUER, mask);
+ if (flags & AT32_GPIOF_HIGH)
+ pio_writel(pio, SODR, mask);
+ else
+ pio_writel(pio, CODR, mask);
+ if (flags & AT32_GPIOF_OUTPUT)
+ pio_writel(pio, OER, mask);
+ else
+ pio_writel(pio, ODR, mask);
+
+ pio_writel(pio, PER, mask);
+ if (!(flags & AT32_GPIOF_PULLUP))
+ pio_writel(pio, PUDR, mask);
+
+ return;
+
+fail:
+ dump_stack();
}
static int __init pio_probe(struct platform_device *pdev)
diff --git a/arch/avr32/mach-at32ap/sm.c b/arch/avr32/mach-at32ap/sm.c
deleted file mode 100644
index 03306eb..0000000
--- a/arch/avr32/mach-at32ap/sm.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * System Manager driver for AT32AP CPUs
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/random.h>
-#include <linux/spinlock.h>
-
-#include <asm/intc.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/sm.h>
-
-#include "sm.h"
-
-#define SM_EIM_IRQ_RESOURCE 1
-#define SM_PM_IRQ_RESOURCE 2
-#define SM_RTC_IRQ_RESOURCE 3
-
-#define to_eim(irqc) container_of(irqc, struct at32_sm, irqc)
-
-struct at32_sm system_manager;
-
-int __init at32_sm_init(void)
-{
- struct resource *regs;
- struct at32_sm *sm = &system_manager;
- int ret = -ENXIO;
-
- regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
- if (!regs)
- goto fail;
-
- spin_lock_init(&sm->lock);
- sm->pdev = &at32_sm_device;
-
- ret = -ENOMEM;
- sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
- if (!sm->regs)
- goto fail;
-
- return 0;
-
-fail:
- printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
- return ret;
-}
-
-/*
- * External Interrupt Module (EIM).
- *
- * EIM gets level- or edge-triggered interrupts of either polarity
- * from the outside and converts it to active-high level-triggered
- * interrupts that the internal interrupt controller can handle. EIM
- * also provides masking/unmasking of interrupts, as well as
- * acknowledging of edge-triggered interrupts.
- */
-
-static irqreturn_t spurious_eim_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- printk(KERN_WARNING "Spurious EIM interrupt %d\n", irq);
- disable_irq(irq);
- return IRQ_NONE;
-}
-
-static struct irqaction eim_spurious_action = {
- .handler = spurious_eim_interrupt,
-};
-
-static irqreturn_t eim_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct irq_controller * irqc = dev_id;
- struct at32_sm *sm = to_eim(irqc);
- unsigned long pending;
-
- /*
- * No need to disable interrupts globally. The interrupt
- * level relevant to this group must be masked all the time,
- * so we know that this particular EIM instance will not be
- * re-entered.
- */
- spin_lock(&sm->lock);
-
- pending = intc_get_pending(sm->irqc.irq_group);
- if (unlikely(!pending)) {
- printk(KERN_ERR "EIM (group %u): No interrupts pending!\n",
- sm->irqc.irq_group);
- goto unlock;
- }
-
- do {
- struct irqaction *action;
- unsigned int i;
-
- i = fls(pending) - 1;
- pending &= ~(1 << i);
- action = sm->action[i];
-
- /* Acknowledge the interrupt */
- sm_writel(sm, EIM_ICR, 1 << i);
-
- spin_unlock(&sm->lock);
-
- if (action->flags & SA_INTERRUPT)
- local_irq_disable();
- action->handler(sm->irqc.first_irq + i, action->dev_id, regs);
- local_irq_enable();
- spin_lock(&sm->lock);
- if (action->flags & SA_SAMPLE_RANDOM)
- add_interrupt_randomness(sm->irqc.first_irq + i);
- } while (pending);
-
-unlock:
- spin_unlock(&sm->lock);
- return IRQ_HANDLED;
-}
-
-static void eim_mask(struct irq_controller *irqc, unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned int i;
-
- i = irq - sm->irqc.first_irq;
- sm_writel(sm, EIM_IDR, 1 << i);
-}
-
-static void eim_unmask(struct irq_controller *irqc, unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned int i;
-
- i = irq - sm->irqc.first_irq;
- sm_writel(sm, EIM_IER, 1 << i);
-}
-
-static int eim_setup(struct irq_controller *irqc, unsigned int irq,
- struct irqaction *action)
-{
- struct at32_sm *sm = to_eim(irqc);
- sm->action[irq - sm->irqc.first_irq] = action;
- /* Acknowledge earlier interrupts */
- sm_writel(sm, EIM_ICR, (1<<(irq - sm->irqc.first_irq)));
- eim_unmask(irqc, irq);
- return 0;
-}
-
-static void eim_free(struct irq_controller *irqc, unsigned int irq,
- void *dev)
-{
- struct at32_sm *sm = to_eim(irqc);
- eim_mask(irqc, irq);
- sm->action[irq - sm->irqc.first_irq] = &eim_spurious_action;
-}
-
-static int eim_set_type(struct irq_controller *irqc, unsigned int irq,
- unsigned int type)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned long flags;
- u32 value, pattern;
-
- spin_lock_irqsave(&sm->lock, flags);
-
- pattern = 1 << (irq - sm->irqc.first_irq);
-
- value = sm_readl(sm, EIM_MODE);
- if (type & IRQ_TYPE_LEVEL)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_MODE, value);
- value = sm_readl(sm, EIM_EDGE);
- if (type & IRQ_EDGE_RISING)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_EDGE, value);
- value = sm_readl(sm, EIM_LEVEL);
- if (type & IRQ_LEVEL_HIGH)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_LEVEL, value);
-
- spin_unlock_irqrestore(&sm->lock, flags);
-
- return 0;
-}
-
-static unsigned int eim_get_type(struct irq_controller *irqc,
- unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned long flags;
- unsigned int type = 0;
- u32 mode, edge, level, pattern;
-
- pattern = 1 << (irq - sm->irqc.first_irq);
-
- spin_lock_irqsave(&sm->lock, flags);
- mode = sm_readl(sm, EIM_MODE);
- edge = sm_readl(sm, EIM_EDGE);
- level = sm_readl(sm, EIM_LEVEL);
- spin_unlock_irqrestore(&sm->lock, flags);
-
- if (mode & pattern)
- type |= IRQ_TYPE_LEVEL;
- if (edge & pattern)
- type |= IRQ_EDGE_RISING;
- if (level & pattern)
- type |= IRQ_LEVEL_HIGH;
-
- return type;
-}
-
-static struct irq_controller_class eim_irq_class = {
- .typename = "EIM",
- .handle = eim_handle_irq,
- .setup = eim_setup,
- .free = eim_free,
- .mask = eim_mask,
- .unmask = eim_unmask,
- .set_type = eim_set_type,
- .get_type = eim_get_type,
-};
-
-static int __init eim_init(void)
-{
- struct at32_sm *sm = &system_manager;
- unsigned int i;
- u32 pattern;
- int ret;
-
- /*
- * The EIM is really the same module as SM, so register
- * mapping, etc. has been taken care of already.
- */
-
- /*
- * Find out how many interrupt lines that are actually
- * implemented in hardware.
- */
- sm_writel(sm, EIM_IDR, ~0UL);
- sm_writel(sm, EIM_MODE, ~0UL);
- pattern = sm_readl(sm, EIM_MODE);
- sm->irqc.nr_irqs = fls(pattern);
-
- ret = -ENOMEM;
- sm->action = kmalloc(sizeof(*sm->action) * sm->irqc.nr_irqs,
- GFP_KERNEL);
- if (!sm->action)
- goto out;
-
- for (i = 0; i < sm->irqc.nr_irqs; i++)
- sm->action[i] = &eim_spurious_action;
-
- spin_lock_init(&sm->lock);
- sm->irqc.irq_group = sm->pdev->resource[SM_EIM_IRQ_RESOURCE].start;
- sm->irqc.class = &eim_irq_class;
-
- ret = intc_register_controller(&sm->irqc);
- if (ret < 0)
- goto out_free_actions;
-
- printk("EIM: External Interrupt Module at 0x%p, IRQ group %u\n",
- sm->regs, sm->irqc.irq_group);
- printk("EIM: Handling %u external IRQs, starting with IRQ%u\n",
- sm->irqc.nr_irqs, sm->irqc.first_irq);
-
- return 0;
-
-out_free_actions:
- kfree(sm->action);
-out:
- return ret;
-}
-arch_initcall(eim_init);
diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
new file mode 100644
index 0000000..ba85e04
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap/at32ap7000.h
@@ -0,0 +1,33 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP7000_H__
+#define __ASM_ARCH_AT32AP7000_H__
+
+#define GPIO_PERIPH_A 0
+#define GPIO_PERIPH_B 1
+
+#define NR_GPIO_CONTROLLERS 4
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE (0)
+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+
+#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
+
+#endif /* __ASM_ARCH_AT32AP7000_H__ */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a39b3e9..b120ee0 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -21,10 +21,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line);
struct platform_device *at32_add_device_usart(unsigned int id);
struct eth_platform_data {
- u8 valid;
- u8 mii_phy_addr;
u8 is_rmii;
- u8 hw_addr[6];
};
struct platform_device *
at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
index 4d50421..83c6905 100644
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/include/asm-avr32/arch-at32ap/portmux.h
@@ -7,10 +7,20 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_AVR32_AT32_PORTMUX_H__
-#define __ASM_AVR32_AT32_PORTMUX_H__
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
- unsigned int function_id);
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */
+#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */
+#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */
+
+void at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
-#endif /* __ASM_AVR32_AT32_PORTMUX_H__ */
+#endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
index 0580b5d..5c01e27 100644
--- a/include/asm-avr32/dma-mapping.h
+++ b/include/asm-avr32/dma-mapping.h
@@ -109,7 +109,7 @@ static inline dma_addr_t
dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction direction)
{
- dma_cache_sync(cpu_addr, size, direction);
+ dma_cache_sync(dev, cpu_addr, size, direction);
return virt_to_bus(cpu_addr);
}
@@ -211,7 +211,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
sg[i].dma_address = page_to_bus(sg[i].page) + sg[i].offset;
virt = page_address(sg[i].page) + sg[i].offset;
- dma_cache_sync(virt, sg[i].length, direction);
+ dma_cache_sync(dev, virt, sg[i].length, direction);
}
return nents;
@@ -256,14 +256,14 @@ static inline void
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
}
static inline void
dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
}
/**
@@ -286,7 +286,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
int i;
for (i = 0; i < nents; i++) {
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, direction);
}
}
@@ -298,7 +298,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
int i;
for (i = 0; i < nents; i++) {
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, direction);
}
}
generated by cgit v0.10.2 at 2024-11-15 02:03:08 (GMT)