diff options
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/pm.h | 19 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/pm.c | 61 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/map.h | 2 |
3 files changed, 60 insertions, 22 deletions
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index f121a5a..c27b8cf 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -71,6 +71,25 @@ struct sleep_save { #define SAVE_ITEM(x) \ { .reg = (x) } +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; +}; + /* helper functions to save/restore lists of registers. */ extern void s3c_pm_do_save(struct sleep_save *ptr, int count); diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index e320b0f..78bf50a 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -72,33 +72,50 @@ static inline void s3c_pm_debug_init(void) #ifdef CONFIG_S3C2410_PM_DEBUG -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C_VA_UART0), - SAVE_UART(S3C_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C_VA_UART2), -#endif -}; +struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; + +static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + save->ulcon = __raw_readl(regs + S3C2410_ULCON); + save->ucon = __raw_readl(regs + S3C2410_UCON); + save->ufcon = __raw_readl(regs + S3C2410_UFCON); + save->umcon = __raw_readl(regs + S3C2410_UMCON); + save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV); +} -static void s3c_pm_save_uart(void) +static void s3c_pm_save_uarts(void) { - s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_save_uart(uart, save); +} + +static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + __raw_writel(save->ulcon, regs + S3C2410_ULCON); + __raw_writel(save->ucon, regs + S3C2410_UCON); + __raw_writel(save->ufcon, regs + S3C2410_UFCON); + __raw_writel(save->umcon, regs + S3C2410_UMCON); + __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV); } -static void s3c_pm_restore_uart(void) +static void s3c_pm_restore_uarts(void) { - s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_restore_uart(uart, save); } #else -static void s3c_pm_save_uart(void) { } -static void s3c_pm_restore_uart(void) { } +static void s3c_pm_save_uarts(void) { } +static void s3c_pm_restore_uarts(void) { } #endif /* The IRQ ext-int code goes here, it is too small to currently bother @@ -250,7 +267,7 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ s3c_pm_save_gpios(); - s3c_pm_save_uart(); + s3c_pm_save_uarts(); s3c_pm_save_core(); /* set the irq configuration for wake */ @@ -293,7 +310,7 @@ static int s3c_pm_enter(suspend_state_t state) /* restore the system state */ s3c_pm_restore_core(); - s3c_pm_restore_uart(); + s3c_pm_restore_uarts(); s3c_pm_restore_gpios(); s3c_pm_debug_init(); diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index fef8ea8..eed8f78 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -31,6 +31,8 @@ #define S3C24XX_SZ_UART SZ_1M #define S3C_UART_OFFSET (0x4000) +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + /* Timers */ #define S3C24XX_VA_TIMER S3C_VA_TIMER #define S3C2410_PA_TIMER (0x51000000) |