diff options
| -rw-r--r-- | arch/ppc/boot/common/ns16550.c | 3 | ||||
| -rw-r--r-- | arch/ppc/boot/simple/embed_config.c | 3 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/Kconfig | 5 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/virtex.c | 88 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/virtex.h | 86 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/xparameters/xparameters.h | 21 | ||||
| -rw-r--r-- | include/asm-ppc/ppc_sys.h | 2 |
7 files changed, 80 insertions, 128 deletions
diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c index 26818bb..4f00c93 100644 --- a/arch/ppc/boot/common/ns16550.c +++ b/arch/ppc/boot/common/ns16550.c @@ -8,6 +8,9 @@ #include <linux/serial_reg.h> #include <asm/serial.h> +#if defined(CONFIG_XILINX_VIRTEX) +#include <platforms/4xx/xparameters/xparameters.h> +#endif #include "nonstdio.h" #include "serial.h" diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c index 491a691..df24202 100644 --- a/arch/ppc/boot/simple/embed_config.c +++ b/arch/ppc/boot/simple/embed_config.c @@ -21,6 +21,9 @@ #ifdef CONFIG_40x #include <asm/io.h> #endif +#ifdef CONFIG_XILINX_VIRTEX +#include <platforms/4xx/xparameters/xparameters.h> +#endif extern unsigned long timebase_period_ns; /* For those boards that don't provide one. diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 203abab..057c7c2 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -172,11 +172,6 @@ config IBM_OCP depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y -config XILINX_OCP - bool - depends on XILINX_ML300 - default y - config IBM_EMAC4 bool depends on 440GX || 440SP || 440SPE diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c index bbb12c0..133a831 100644 --- a/arch/ppc/platforms/4xx/virtex.c +++ b/arch/ppc/platforms/4xx/virtex.c @@ -1,60 +1,56 @@ /* - * arch/ppc/platforms/4xx/virtex.c + * Virtex-II Pro & Virtex-4 FX common infrastructure * - * Author: MontaVista Software, Inc. - * source@mvista.com + * Maintainer: Grant Likely <grant.likely@secretlab.ca> * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. + * Copyright 2005 Secret Lab Technologies Ltd. + * Copyright 2005 General Dynamics Canada Ltd. + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. */ -#include <linux/config.h> #include <linux/init.h> -#include <asm/ocp.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/serial_8250.h> +#include <asm/ppc_sys.h> #include <platforms/4xx/virtex.h> +#include <platforms/4xx/xparameters/xparameters.h> + +#define XPAR_UART(num) { \ + .mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \ + .irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ + .iotype = UPIO_MEM, \ + .uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \ + .flags = UPF_BOOT_AUTOCONF, \ + .regshift = 2, \ + } -/* Have OCP take care of the serial ports. */ -struct ocp_def core_ocp[] = { +struct plat_serial8250_port serial_platform_data[] = { #ifdef XPAR_UARTNS550_0_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 0, - .paddr = XPAR_UARTNS550_0_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, - .pm = OCP_CPM_NA - }, + XPAR_UART(0), +#endif #ifdef XPAR_UARTNS550_1_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 1, - .paddr = XPAR_UARTNS550_1_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID, - .pm = OCP_CPM_NA - }, + XPAR_UART(1), +#endif #ifdef XPAR_UARTNS550_2_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 2, - .paddr = XPAR_UARTNS550_2_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID, - .pm = OCP_CPM_NA - }, + XPAR_UART(2), +#endif #ifdef XPAR_UARTNS550_3_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 3, - .paddr = XPAR_UARTNS550_3_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID, - .pm = OCP_CPM_NA + XPAR_UART(3), +#endif + { }, /* terminated by empty record */ +}; + +struct platform_device ppc_sys_platform_devices[] = { + [VIRTEX_UART] = { + .name = "serial8250", + .id = 0, + .dev.platform_data = serial_platform_data, }, -#ifdef XPAR_UARTNS550_4_BASEADDR -#error Edit this file to add more devices. -#endif /* 4 */ -#endif /* 3 */ -#endif /* 2 */ -#endif /* 1 */ -#endif /* 0 */ - { .vendor = OCP_VENDOR_INVALID - } }; + diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h index 049c767..1a01b81 100644 --- a/arch/ppc/platforms/4xx/virtex.h +++ b/arch/ppc/platforms/4xx/virtex.h @@ -15,85 +15,21 @@ #ifndef __ASM_VIRTEX_H__ #define __ASM_VIRTEX_H__ -#include <linux/config.h> -#include <platforms/4xx/xparameters/xparameters.h> - /* serial defines */ -#define RS_TABLE_SIZE 4 /* change this and add more devices below - if you have more then 4 16x50 UARTs */ - -#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16) - -/* The serial ports in the Virtex-II Pro have each I/O byte in the - * LSByte of a word. This means that iomem_reg_shift needs to be 2 to - * change the byte offsets into word offsets. In addition the base - * addresses need to have 3 added to them to get to the LSByte. - */ -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ - ASYNC_BOOT_AUTOCONF, \ - .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM}, - -#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define ML300_UART0 STD_UART_OP(0) -#else -#define ML300_UART0 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define ML300_UART1 STD_UART_OP(1) -#else -#define ML300_UART1 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define ML300_UART2 STD_UART_OP(2) -#else -#define ML300_UART2 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define ML300_UART3 STD_UART_OP(3) -#else -#define ML300_UART3 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID) -#error Edit this file to add more devices. -#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define NR_SER_PORTS 4 -#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define NR_SER_PORTS 3 -#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define NR_SER_PORTS 2 -#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define NR_SER_PORTS 1 -#else -#define NR_SER_PORTS 0 -#endif +#include <asm/ibm405.h> -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_PORT_DFNS \ - ML300_UART0 \ - ML300_UART1 \ - ML300_UART2 \ - ML300_UART3 +/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */ +#if !defined(BASE_BAUD) + #define BASE_BAUD (0) /* dummy value; not used */ #endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_PORT_DFNS \ - ML300_UART1 \ - ML300_UART0 \ - ML300_UART2 \ - ML300_UART3 + +/* Device type enumeration for platform bus definitions */ +#ifndef __ASSEMBLY__ +enum ppc_sys_devices { + VIRTEX_UART, +}; #endif - -#define DCRN_CPMFR_BASE 0 - -#include <asm/ibm405.h> - + #endif /* __ASM_VIRTEX_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h index fe4eac6..7b73043 100644 --- a/arch/ppc/platforms/4xx/xparameters/xparameters.h +++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h @@ -1,7 +1,8 @@ /* * include/asm-ppc/xparameters.h * - * This file includes the correct xparameters.h for the CONFIG'ed board + * This file includes the correct xparameters.h for the CONFIG'ed board plus + * fixups to translate board specific XPAR values to a common set of names * * Author: MontaVista Software, Inc. * source@mvista.com @@ -14,5 +15,21 @@ #include <linux/config.h> #if defined(CONFIG_XILINX_ML300) -#include <platforms/4xx/xparameters/xparameters_ml300.h> + #include "xparameters_ml300.h" +#else + /* Add other board xparameter includes here before the #else */ + #error No xparameters_*.h file included +#endif + +#ifndef SERIAL_PORT_DFNS + /* zImage serial port definitions */ + #define RS_TABLE_SIZE 1 + #define SERIAL_PORT_DFNS { \ + .baud_base = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16, \ + .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, \ + .flags = ASYNC_BOOT_AUTOCONF, \ + .iomem_base = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, #endif diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h index 83d8c77..bdc4dde 100644 --- a/include/asm-ppc/ppc_sys.h +++ b/include/asm-ppc/ppc_sys.h @@ -33,6 +33,8 @@ #include <asm/mpc52xx.h> #elif defined(CONFIG_MPC10X_BRIDGE) #include <asm/mpc10x.h> +#elif defined(CONFIG_XILINX_VIRTEX) +#include <platforms/4xx/virtex.h> #else #error "need definition of ppc_sys_devices" #endif |