diff options
-rw-r--r-- | Documentation/cpu-freq/pcc-cpufreq.txt | 207 | ||||
-rw-r--r-- | Documentation/power/runtime_pm.txt | 93 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/cpufreq/Kconfig | 14 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/cpufreq/Makefile | 1 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c | 620 | ||||
-rw-r--r-- | drivers/acpi/processor_core.c | 2 | ||||
-rw-r--r-- | drivers/base/power/Makefile | 1 | ||||
-rw-r--r-- | drivers/base/power/generic_ops.c | 233 | ||||
-rw-r--r-- | drivers/gpu/drm/Kconfig | 1 | ||||
-rw-r--r-- | drivers/usb/core/devices.c | 69 | ||||
-rw-r--r-- | drivers/virtio/virtio_pci.c | 1 | ||||
-rw-r--r-- | fs/ubifs/Kconfig | 1 | ||||
-rw-r--r-- | include/linux/pm.h | 51 | ||||
-rw-r--r-- | include/linux/pm_runtime.h | 6 | ||||
-rw-r--r-- | lib/Kconfig | 3 | ||||
-rw-r--r-- | lib/Makefile | 3 | ||||
-rw-r--r-- | lib/vsprintf.c | 71 |
17 files changed, 1285 insertions, 92 deletions
diff --git a/Documentation/cpu-freq/pcc-cpufreq.txt b/Documentation/cpu-freq/pcc-cpufreq.txt new file mode 100644 index 0000000..9e3c3b3 --- /dev/null +++ b/Documentation/cpu-freq/pcc-cpufreq.txt @@ -0,0 +1,207 @@ +/* + * pcc-cpufreq.txt - PCC interface documentation + * + * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com> + * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. + * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON + * INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + + + Processor Clocking Control Driver + --------------------------------- + +Contents: +--------- +1. Introduction +1.1 PCC interface +1.1.1 Get Average Frequency +1.1.2 Set Desired Frequency +1.2 Platforms affected +2. Driver and /sys details +2.1 scaling_available_frequencies +2.2 cpuinfo_transition_latency +2.3 cpuinfo_cur_freq +2.4 related_cpus +3. Caveats + +1. Introduction: +---------------- +Processor Clocking Control (PCC) is an interface between the platform +firmware and OSPM. It is a mechanism for coordinating processor +performance (ie: frequency) between the platform firmware and the OS. + +The PCC driver (pcc-cpufreq) allows OSPM to take advantage of the PCC +interface. + +OS utilizes the PCC interface to inform platform firmware what frequency the +OS wants for a logical processor. The platform firmware attempts to achieve +the requested frequency. If the request for the target frequency could not be +satisfied by platform firmware, then it usually means that power budget +conditions are in place, and "power capping" is taking place. + +1.1 PCC interface: +------------------ +The complete PCC specification is available here: +http://www.acpica.org/download/Processor-Clocking-Control-v1p0.pdf + +PCC relies on a shared memory region that provides a channel for communication +between the OS and platform firmware. PCC also implements a "doorbell" that +is used by the OS to inform the platform firmware that a command has been +sent. + +The ACPI PCCH() method is used to discover the location of the PCC shared +memory region. The shared memory region header contains the "command" and +"status" interface. PCCH() also contains details on how to access the platform +doorbell. + +The following commands are supported by the PCC interface: +* Get Average Frequency +* Set Desired Frequency + +The ACPI PCCP() method is implemented for each logical processor and is +used to discover the offsets for the input and output buffers in the shared +memory region. + +When PCC mode is enabled, the platform will not expose processor performance +or throttle states (_PSS, _TSS and related ACPI objects) to OSPM. Therefore, +the native P-state driver (such as acpi-cpufreq for Intel, powernow-k8 for +AMD) will not load. + +However, OSPM remains in control of policy. The governor (eg: "ondemand") +computes the required performance for each processor based on server workload. +The PCC driver fills in the command interface, and the input buffer and +communicates the request to the platform firmware. The platform firmware is +responsible for delivering the requested performance. + +Each PCC command is "global" in scope and can affect all the logical CPUs in +the system. Therefore, PCC is capable of performing "group" updates. With PCC +the OS is capable of getting/setting the frequency of all the logical CPUs in +the system with a single call to the BIOS. + +1.1.1 Get Average Frequency: +---------------------------- +This command is used by the OSPM to query the running frequency of the +processor since the last time this command was completed. The output buffer +indicates the average unhalted frequency of the logical processor expressed as +a percentage of the nominal (ie: maximum) CPU frequency. The output buffer +also signifies if the CPU frequency is limited by a power budget condition. + +1.1.2 Set Desired Frequency: +---------------------------- +This command is used by the OSPM to communicate to the platform firmware the +desired frequency for a logical processor. The output buffer is currently +ignored by OSPM. The next invocation of "Get Average Frequency" will inform +OSPM if the desired frequency was achieved or not. + +1.2 Platforms affected: +----------------------- +The PCC driver will load on any system where the platform firmware: +* supports the PCC interface, and the associated PCCH() and PCCP() methods +* assumes responsibility for managing the hardware clocking controls in order +to deliver the requested processor performance + +Currently, certain HP ProLiant platforms implement the PCC interface. On those +platforms PCC is the "default" choice. + +However, it is possible to disable this interface via a BIOS setting. In +such an instance, as is also the case on platforms where the PCC interface +is not implemented, the PCC driver will fail to load silently. + +2. Driver and /sys details: +--------------------------- +When the driver loads, it merely prints the lowest and the highest CPU +frequencies supported by the platform firmware. + +The PCC driver loads with a message such as: +pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2933 +MHz + +This means that the OPSM can request the CPU to run at any frequency in +between the limits (1600 MHz, and 2933 MHz) specified in the message. + +Internally, there is no need for the driver to convert the "target" frequency +to a corresponding P-state. + +The VERSION number for the driver will be of the format v.xy.ab. +eg: 1.00.02 + ----- -- + | | + | -- this will increase with bug fixes/enhancements to the driver + |-- this is the version of the PCC specification the driver adheres to + + +The following is a brief discussion on some of the fields exported via the +/sys filesystem and how their values are affected by the PCC driver: + +2.1 scaling_available_frequencies: +---------------------------------- +scaling_available_frequencies is not created in /sys. No intermediate +frequencies need to be listed because the BIOS will try to achieve any +frequency, within limits, requested by the governor. A frequency does not have +to be strictly associated with a P-state. + +2.2 cpuinfo_transition_latency: +------------------------------- +The cpuinfo_transition_latency field is 0. The PCC specification does +not include a field to expose this value currently. + +2.3 cpuinfo_cur_freq: +--------------------- +A) Often cpuinfo_cur_freq will show a value different than what is declared +in the scaling_available_frequencies or scaling_cur_freq, or scaling_max_freq. +This is due to "turbo boost" available on recent Intel processors. If certain +conditions are met the BIOS can achieve a slightly higher speed than requested +by OSPM. An example: + +scaling_cur_freq : 2933000 +cpuinfo_cur_freq : 3196000 + +B) There is a round-off error associated with the cpuinfo_cur_freq value. +Since the driver obtains the current frequency as a "percentage" (%) of the +nominal frequency from the BIOS, sometimes, the values displayed by +scaling_cur_freq and cpuinfo_cur_freq may not match. An example: + +scaling_cur_freq : 1600000 +cpuinfo_cur_freq : 1583000 + +In this example, the nominal frequency is 2933 MHz. The driver obtains the +current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency: + + 54% of 2933 MHz = 1583 MHz + +Nominal frequency is the maximum frequency of the processor, and it usually +corresponds to the frequency of the P0 P-state. + +2.4 related_cpus: +----------------- +The related_cpus field is identical to affected_cpus. + +affected_cpus : 4 +related_cpus : 4 + +Currently, the PCC driver does not evaluate _PSD. The platforms that support +PCC do not implement SW_ALL. So OSPM doesn't need to perform any coordination +to ensure that the same frequency is requested of all dependent CPUs. + +3. Caveats: +----------- +The "cpufreq_stats" module in its present form cannot be loaded and +expected to work with the PCC driver. Since the "cpufreq_stats" module +provides information wrt each P-state, it is not applicable to the PCC driver. diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 356fd86..ab00eed 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -224,6 +224,12 @@ defined in include/linux/pm.h: RPM_SUSPENDED, which means that each device is initially regarded by the PM core as 'suspended', regardless of its real hardware status + unsigned int runtime_auto; + - if set, indicates that the user space has allowed the device driver to + power manage the device at run time via the /sys/devices/.../power/control + interface; it may only be modified with the help of the pm_runtime_allow() + and pm_runtime_forbid() helper functions + All of the above fields are members of the 'power' member of 'struct device'. 4. Run-time PM Device Helper Functions @@ -329,6 +335,20 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: 'power.runtime_error' is set or 'power.disable_depth' is greater than zero) + bool pm_runtime_suspended(struct device *dev); + - return true if the device's runtime PM status is 'suspended', or false + otherwise + + void pm_runtime_allow(struct device *dev); + - set the power.runtime_auto flag for the device and decrease its usage + counter (used by the /sys/devices/.../power/control interface to + effectively allow the device to be power managed at run time) + + void pm_runtime_forbid(struct device *dev); + - unset the power.runtime_auto flag for the device and increase its usage + counter (used by the /sys/devices/.../power/control interface to + effectively prevent the device from being power managed at run time) + It is safe to execute the following helper functions from interrupt context: pm_request_idle() @@ -382,6 +402,18 @@ may be desirable to suspend the device as soon as ->probe() or ->remove() has finished, so the PM core uses pm_runtime_idle_sync() to invoke the subsystem-level idle callback for the device at that time. +The user space can effectively disallow the driver of the device to power manage +it at run time by changing the value of its /sys/devices/.../power/control +attribute to "on", which causes pm_runtime_forbid() to be called. In principle, +this mechanism may also be used by the driver to effectively turn off the +run-time power management of the device until the user space turns it on. +Namely, during the initialization the driver can make sure that the run-time PM +status of the device is 'active' and call pm_runtime_forbid(). It should be +noted, however, that if the user space has already intentionally changed the +value of /sys/devices/.../power/control to "auto" to allow the driver to power +manage the device at run time, the driver may confuse it by using +pm_runtime_forbid() this way. + 6. Run-time PM and System Sleep Run-time PM and system sleep (i.e., system suspend and hibernation, also known @@ -431,3 +463,64 @@ The PM core always increments the run-time usage counter before calling the ->prepare() callback and decrements it after calling the ->complete() callback. Hence disabling run-time PM temporarily like this will not cause any run-time suspend callbacks to be lost. + +7. Generic subsystem callbacks + +Subsystems may wish to conserve code space by using the set of generic power +management callbacks provided by the PM core, defined in +driver/base/power/generic_ops.c: + + int pm_generic_runtime_idle(struct device *dev); + - invoke the ->runtime_idle() callback provided by the driver of this + device, if defined, and call pm_runtime_suspend() for this device if the + return value is 0 or the callback is not defined + + int pm_generic_runtime_suspend(struct device *dev); + - invoke the ->runtime_suspend() callback provided by the driver of this + device and return its result, or return -EINVAL if not defined + + int pm_generic_runtime_resume(struct device *dev); + - invoke the ->runtime_resume() callback provided by the driver of this + device and return its result, or return -EINVAL if not defined + + int pm_generic_suspend(struct device *dev); + - if the device has not been suspended at run time, invoke the ->suspend() + callback provided by its driver and return its result, or return 0 if not + defined + + int pm_generic_resume(struct device *dev); + - invoke the ->resume() callback provided by the driver of this device and, + if successful, change the device's runtime PM status to 'active' + + int pm_generic_freeze(struct device *dev); + - if the device has not been suspended at run time, invoke the ->freeze() + callback provided by its driver and return its result, or return 0 if not + defined + + int pm_generic_thaw(struct device *dev); + - if the device has not been suspended at run time, invoke the ->thaw() + callback provided by its driver and return its result, or return 0 if not + defined + + int pm_generic_poweroff(struct device *dev); + - if the device has not been suspended at run time, invoke the ->poweroff() + callback provided by its driver and return its result, or return 0 if not + defined + + int pm_generic_restore(struct device *dev); + - invoke the ->restore() callback provided by the driver of this device and, + if successful, change the device's runtime PM status to 'active' + +These functions can be assigned to the ->runtime_idle(), ->runtime_suspend(), +->runtime_resume(), ->suspend(), ->resume(), ->freeze(), ->thaw(), ->poweroff(), +or ->restore() callback pointers in the subsystem-level dev_pm_ops structures. + +If a subsystem wishes to use all of them at the same time, it can simply assign +the GENERIC_SUBSYS_PM_OPS macro, defined in include/linux/pm.h, to its +dev_pm_ops structure pointer. + +Device drivers that wish to use the same function as a system suspend, freeze, +poweroff and run-time suspend callback, and similarly for system resume, thaw, +restore, and run-time resume, can achieve this with the help of the +UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its +last argument to NULL). diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig index f138c6c..870e6cc 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -10,6 +10,20 @@ if CPU_FREQ comment "CPUFreq processor drivers" +config X86_PCC_CPUFREQ + tristate "Processor Clocking Control interface driver" + depends on ACPI && ACPI_PROCESSOR + help + This driver adds support for the PCC interface. + + For details, take a look at: + <file:Documentation/cpu-freq/pcc-cpufreq.txt>. + + To compile this driver as a module, choose M here: the + module will be called pcc-cpufreq. + + If in doubt, say N. + config X86_ACPI_CPUFREQ tristate "ACPI Processor P-States driver" select CPU_FREQ_TABLE diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile index 509296d..1840c0a 100644 --- a/arch/x86/kernel/cpu/cpufreq/Makefile +++ b/arch/x86/kernel/cpu/cpufreq/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o +obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c new file mode 100644 index 0000000..ff36d29 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c @@ -0,0 +1,620 @@ +/* + * pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface + * + * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com> + * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. + * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON + * INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/compiler.h> + +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> + +#include <acpi/processor.h> + +#define PCC_VERSION "1.00.00" +#define POLL_LOOPS 300 + +#define CMD_COMPLETE 0x1 +#define CMD_GET_FREQ 0x0 +#define CMD_SET_FREQ 0x1 + +#define BUF_SZ 4 + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "pcc-cpufreq", msg) + +struct pcc_register_resource { + u8 descriptor; + u16 length; + u8 space_id; + u8 bit_width; + u8 bit_offset; + u8 access_size; + u64 address; +} __attribute__ ((packed)); + +struct pcc_memory_resource { + u8 descriptor; + u16 length; + u8 space_id; + u8 resource_usage; + u8 type_specific; + u64 granularity; + u64 minimum; + u64 maximum; + u64 translation_offset; + u64 address_length; +} __attribute__ ((packed)); + +static struct cpufreq_driver pcc_cpufreq_driver; + +struct pcc_header { + u32 signature; + u16 length; + u8 major; + u8 minor; + u32 features; + u16 command; + u16 status; + u32 latency; + u32 minimum_time; + u32 maximum_time; + u32 nominal; + u32 throttled_frequency; + u32 minimum_frequency; +}; + +static void __iomem *pcch_virt_addr; +static struct pcc_header __iomem *pcch_hdr; + +static DEFINE_SPINLOCK(pcc_lock); + +static struct acpi_generic_address doorbell; + +static u64 doorbell_preserve; +static u64 doorbell_write; + +static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f, + 0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46}; + +struct pcc_cpu { + u32 input_offset; + u32 output_offset; +}; + +static struct pcc_cpu *pcc_cpu_info; + +static int pcc_cpufreq_verify(struct cpufreq_policy *policy) +{ + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + return 0; +} + +static inline void pcc_cmd(void) +{ + u64 doorbell_value; + int i; + + acpi_read(&doorbell_value, &doorbell); + acpi_write((doorbell_value & doorbell_preserve) | doorbell_write, + &doorbell); + + for (i = 0; i < POLL_LOOPS; i++) { + if (ioread16(&pcch_hdr->status) & CMD_COMPLETE) + break; + } +} + +static inline void pcc_clear_mapping(void) +{ + if (pcch_virt_addr) + iounmap(pcch_virt_addr); + pcch_virt_addr = NULL; +} + +static unsigned int pcc_get_freq(unsigned int cpu) +{ + struct pcc_cpu *pcc_cpu_data; + unsigned int curr_freq; + unsigned int freq_limit; + u16 status; + u32 input_buffer; + u32 output_buffer; + + spin_lock(&pcc_lock); + + dprintk("get: get_freq for CPU %d\n", cpu); + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + input_buffer = 0x1; + iowrite32(input_buffer, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + iowrite16(CMD_GET_FREQ, &pcch_hdr->command); + + pcc_cmd(); + + output_buffer = + ioread32(pcch_virt_addr + pcc_cpu_data->output_offset); + + /* Clear the input buffer - we are done with the current command */ + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + + status = ioread16(&pcch_hdr->status); + if (status != CMD_COMPLETE) { + dprintk("get: FAILED: for CPU %d, status is %d\n", + cpu, status); + goto cmd_incomplete; + } + iowrite16(0, &pcch_hdr->status); + curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff)) + / 100) * 1000); + + dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is " + "0x%x, contains a value of: 0x%x. Speed is: %d MHz\n", + cpu, (pcch_virt_addr + pcc_cpu_data->output_offset), + output_buffer, curr_freq); + + freq_limit = (output_buffer >> 8) & 0xff; + if (freq_limit != 0xff) { + dprintk("get: frequency for cpu %d is being temporarily" + " capped at %d\n", cpu, curr_freq); + } + + spin_unlock(&pcc_lock); + return curr_freq; + +cmd_incomplete: + iowrite16(0, &pcch_hdr->status); + spin_unlock(&pcc_lock); + return -EINVAL; +} + +static int pcc_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct pcc_cpu *pcc_cpu_data; + struct cpufreq_freqs freqs; + u16 status; + u32 input_buffer; + int cpu; + + spin_lock(&pcc_lock); + cpu = policy->cpu; + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + dprintk("target: CPU %d should go to target freq: %d " + "(virtual) input_offset is 0x%x\n", + cpu, target_freq, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + + freqs.new = target_freq; + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + input_buffer = 0x1 | (((target_freq * 100) + / (ioread32(&pcch_hdr->nominal) * 1000)) << 8); + iowrite32(input_buffer, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + iowrite16(CMD_SET_FREQ, &pcch_hdr->command); + + pcc_cmd(); + + /* Clear the input buffer - we are done with the current command */ + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + + status = ioread16(&pcch_hdr->status); + if (status != CMD_COMPLETE) { + dprintk("target: FAILED for cpu %d, with status: 0x%x\n", + cpu, status); + goto cmd_incomplete; + } + iowrite16(0, &pcch_hdr->status); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + dprintk("target: was SUCCESSFUL for cpu %d\n", cpu); + spin_unlock(&pcc_lock); + + return 0; + +cmd_incomplete: + iowrite16(0, &pcch_hdr->status); + spin_unlock(&pcc_lock); + return -EINVAL; +} + +static int pcc_get_offset(int cpu) +{ + acpi_status status; + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *pccp, *offset; + struct pcc_cpu *pcc_cpu_data; + struct acpi_processor *pr; + int ret = 0; + + pr = per_cpu(processors, cpu); + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + pccp = buffer.pointer; + if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) { + ret = -ENODEV; + goto out_free; + }; + + offset = &(pccp->package.elements[0]); + if (!offset || offset->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto out_free; + } + + pcc_cpu_data->input_offset = offset->integer.value; + + offset = &(pccp->package.elements[1]); + if (!offset || offset->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto out_free; + } + + pcc_cpu_data->output_offset = offset->integer.value; + + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ); + + dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data " + "input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n", + cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset); +out_free: + kfree(buffer.pointer); + return ret; +} + +static int __init pcc_cpufreq_do_osc(acpi_handle *handle) +{ + acpi_status status; + struct acpi_object_list input; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object in_params[4]; + union acpi_object *out_obj; + u32 capabilities[2]; + u32 errors; + u32 supported; + int ret = 0; + + input.count = 4; + input.pointer = in_params; + input.count = 4; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = 16; + in_params[0].buffer.pointer = OSC_UUID; + in_params[1].type = ACPI_TYPE_INTEGER; + in_params[1].integer.value = 1; + in_params[2].type = ACPI_TYPE_INTEGER; + in_params[2].integer.value = 2; + in_params[3].type = ACPI_TYPE_BUFFER; + in_params[3].buffer.length = 8; + in_params[3].buffer.pointer = (u8 *)&capabilities; + + capabilities[0] = OSC_QUERY_ENABLE; + capabilities[1] = 0x1; + + status = acpi_evaluate_object(*handle, "_OSC", &input, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!output.length) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + ret = -ENODEV; + goto out_free; + } + + supported = *((u32 *)(out_obj->buffer.pointer + 4)); + if (!(supported & 0x1)) { + ret = -ENODEV; + goto out_free; + } + + kfree(output.pointer); + capabilities[0] = 0x0; + capabilities[1] = 0x1; + + status = acpi_evaluate_object(*handle, "_OSC", &input, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!output.length) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + ret = -ENODEV; + goto out_free; + } + + supported = *((u32 *)(out_obj->buffer.pointer + 4)); + if (!(supported & 0x1)) { + ret = -ENODEV; + goto out_free; + } + +out_free: + kfree(output.pointer); + return ret; +} + +static int __init pcc_cpufreq_probe(void) +{ + acpi_status status; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; + struct pcc_memory_resource *mem_resource; + struct pcc_register_resource *reg_resource; + union acpi_object *out_obj, *member; + acpi_handle handle, osc_handle; + int ret = 0; + + status = acpi_get_handle(NULL, "\\_SB", &handle); + if (ACPI_FAILURE(status)) + return -ENODEV; + + status = acpi_get_handle(handle, "_OSC", &osc_handle); + if (ACPI_SUCCESS(status)) { + ret = pcc_cpufreq_do_osc(&osc_handle); + if (ret) + dprintk("probe: _OSC evaluation did not succeed\n"); + /* Firmware's use of _OSC is optional */ + ret = 0; + } + + status = acpi_evaluate_object(handle, "PCCH", NULL, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_PACKAGE) { + ret = -ENODEV; + goto out_free; + } + + member = &out_obj->package.elements[0]; + if (member->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + mem_resource = (struct pcc_memory_resource *)member->buffer.pointer; + + dprintk("probe: mem_resource descriptor: 0x%x," + " length: %d, space_id: %d, resource_usage: %d," + " type_specific: %d, granularity: 0x%llx," + " minimum: 0x%llx, maximum: 0x%llx," + " translation_offset: 0x%llx, address_length: 0x%llx\n", + mem_resource->descriptor, mem_resource->length, + mem_resource->space_id, mem_resource->resource_usage, + mem_resource->type_specific, mem_resource->granularity, + mem_resource->minimum, mem_resource->maximum, + mem_resource->translation_offset, + mem_resource->address_length); + + if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) { + ret = -ENODEV; + goto out_free; + } + + pcch_virt_addr = ioremap_nocache(mem_resource->minimum, + mem_resource->address_length); + if (pcch_virt_addr == NULL) { + dprintk("probe: could not map shared mem region\n"); + goto out_free; + } + pcch_hdr = pcch_virt_addr; + + dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr); + dprintk("probe: PCCH header is at physical address: 0x%llx," + " signature: 0x%x, length: %d bytes, major: %d, minor: %d," + " supported features: 0x%x, command field: 0x%x," + " status field: 0x%x, nominal latency: %d us\n", + mem_resource->minimum, ioread32(&pcch_hdr->signature), + ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major), + ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features), + ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status), + ioread32(&pcch_hdr->latency)); + + dprintk("probe: min time between commands: %d us," + " max time between commands: %d us," + " nominal CPU frequency: %d MHz," + " minimum CPU frequency: %d MHz," + " minimum CPU frequency without throttling: %d MHz\n", + ioread32(&pcch_hdr->minimum_time), + ioread32(&pcch_hdr->maximum_time), + ioread32(&pcch_hdr->nominal), + ioread32(&pcch_hdr->throttled_frequency), + ioread32(&pcch_hdr->minimum_frequency)); + + member = &out_obj->package.elements[1]; + if (member->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto pcch_free; + } + + reg_resource = (struct pcc_register_resource *)member->buffer.pointer; + + doorbell.space_id = reg_resource->space_id; + doorbell.bit_width = reg_resource->bit_width; + doorbell.bit_offset = reg_resource->bit_offset; + doorbell.access_width = 64; + doorbell.address = reg_resource->address; + + dprintk("probe: doorbell: space_id is %d, bit_width is %d, " + "bit_offset is %d, access_width is %d, address is 0x%llx\n", + doorbell.space_id, doorbell.bit_width, doorbell.bit_offset, + doorbell.access_width, reg_resource->address); + + member = &out_obj->package.elements[2]; + if (member->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto pcch_free; + } + + doorbell_preserve = member->integer.value; + + member = &out_obj->package.elements[3]; + if (member->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto pcch_free; + } + + doorbell_write = member->integer.value; + + dprintk("probe: doorbell_preserve: 0x%llx," + " doorbell_write: 0x%llx\n", + doorbell_preserve, doorbell_write); + + pcc_cpu_info = alloc_percpu(struct pcc_cpu); + if (!pcc_cpu_info) { + ret = -ENOMEM; + goto pcch_free; + } + + printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency" + " limits: %d MHz, %d MHz\n", PCC_VERSION, + ioread32(&pcch_hdr->minimum_frequency), + ioread32(&pcch_hdr->nominal)); + kfree(output.pointer); + return ret; +pcch_free: + pcc_clear_mapping(); +out_free: + kfree(output.pointer); + return ret; +} + +static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + unsigned int result = 0; + + if (!pcch_virt_addr) { + result = -1; + goto pcch_null; + } + + result = pcc_get_offset(cpu); + if (result) { + dprintk("init: PCCP evaluation failed\n"); + goto free; + } + + policy->max = policy->cpuinfo.max_freq = + ioread32(&pcch_hdr->nominal) * 1000; + policy->min = policy->cpuinfo.min_freq = + ioread32(&pcch_hdr->minimum_frequency) * 1000; + policy->cur = pcc_get_freq(cpu); + + dprintk("init: policy->max is %d, policy->min is %d\n", + policy->max, policy->min); + + return 0; +free: + pcc_clear_mapping(); + free_percpu(pcc_cpu_info); +pcch_null: + return result; +} + +static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver pcc_cpufreq_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .get = pcc_get_freq, + .verify = pcc_cpufreq_verify, + .target = pcc_cpufreq_target, + .init = pcc_cpufreq_cpu_init, + .exit = pcc_cpufreq_cpu_exit, + .name = "pcc-cpufreq", + .owner = THIS_MODULE, +}; + +static int __init pcc_cpufreq_init(void) +{ + int ret; + + if (acpi_disabled) + return 0; + + ret = pcc_cpufreq_probe(); + if (ret) { + dprintk("pcc_cpufreq_init: PCCH evaluation failed\n"); + return ret; + } + + ret = cpufreq_register_driver(&pcc_cpufreq_driver); + + return ret; +} + +static void __exit pcc_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pcc_cpufreq_driver); + + pcc_clear_mapping(); + + free_percpu(pcc_cpu_info); +} + +MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar"); +MODULE_VERSION(PCC_VERSION); +MODULE_DESCRIPTION("Processor Clocking Control interface driver"); +MODULE_LICENSE("GPL"); + +late_initcall(pcc_cpufreq_init); +module_exit(pcc_cpufreq_exit); diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 9863c98..e9b7b40 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -123,6 +123,8 @@ static const struct file_operations acpi_processor_info_fops = { #endif DEFINE_PER_CPU(struct acpi_processor *, processors); +EXPORT_PER_CPU_SYMBOL(processors); + struct acpi_processor_errata errata __read_mostly; /* -------------------------------------------------------------------------- diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile index 3ce3519..89de753 100644 --- a/drivers/base/power/Makefile +++ b/drivers/base/power/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_PM) += sysfs.o obj-$(CONFIG_PM_SLEEP) += main.o obj-$(CONFIG_PM_RUNTIME) += runtime.o +obj-$(CONFIG_PM_OPS) += generic_ops.o obj-$(CONFIG_PM_TRACE_RTC) += trace.o ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c new file mode 100644 index 0000000..4b29d49 --- /dev/null +++ b/drivers/base/power/generic_ops.c @@ -0,0 +1,233 @@ +/* + * drivers/base/power/generic_ops.c - Generic PM callbacks for subsystems + * + * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is released under the GPLv2. + */ + +#include <linux/pm.h> +#include <linux/pm_runtime.h> + +#ifdef CONFIG_PM_RUNTIME +/** + * pm_generic_runtime_idle - Generic runtime idle callback for subsystems. + * @dev: Device to handle. + * + * If PM operations are defined for the @dev's driver and they include + * ->runtime_idle(), execute it and return its error code, if nonzero. + * Otherwise, execute pm_runtime_suspend() for the device and return 0. + */ +int pm_generic_runtime_idle(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + if (pm && pm->runtime_idle) { + int ret = pm->runtime_idle(dev); + if (ret) + return ret; + } + + pm_runtime_suspend(dev); + return 0; +} +EXPORT_SYMBOL_GPL(pm_generic_runtime_idle); + +/** + * pm_generic_runtime_suspend - Generic runtime suspend callback for subsystems. + * @dev: Device to suspend. + * + * If PM operations are defined for the @dev's driver and they include + * ->runtime_suspend(), execute it and return its error code. Otherwise, + * return -EINVAL. + */ +int pm_generic_runtime_suspend(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + int ret; + + ret = pm && pm->runtime_suspend ? pm->runtime_suspend(dev) : -EINVAL; + + return ret; +} +EXPORT_SYMBOL_GPL(pm_generic_runtime_suspend); + +/** + * pm_generic_runtime_resume - Generic runtime resume callback for subsystems. + * @dev: Device to resume. + * + * If PM operations are defined for the @dev's driver and they include + * ->runtime_resume(), execute it and return its error code. Otherwise, + * return -EINVAL. + */ +int pm_generic_runtime_resume(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + int ret; + + ret = pm && pm->runtime_resume ? pm->runtime_resume(dev) : -EINVAL; + + return ret; +} +EXPORT_SYMBOL_GPL(pm_generic_runtime_resume); +#endif /* CONFIG_PM_RUNTIME */ + +#ifdef CONFIG_PM_SLEEP +/** + * __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback. + * @dev: Device to handle. + * @event: PM transition of the system under way. + * + * If the device has not been suspended at run time, execute the + * suspend/freeze/poweroff/thaw callback provided by its driver, if defined, and + * return its error code. Otherwise, return zero. + */ +static int __pm_generic_call(struct device *dev, int event) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + int (*callback)(struct device *); + + if (!pm || pm_runtime_suspended(dev)) + return 0; + + switch (event) { + case PM_EVENT_SUSPEND: + callback = pm->suspend; + break; + case PM_EVENT_FREEZE: + callback = pm->freeze; + break; + case PM_EVENT_HIBERNATE: + callback = pm->poweroff; + break; + case PM_EVENT_THAW: + callback = pm->thaw; + break; + default: + callback = NULL; + break; + } + + return callback ? callback(dev) : 0; +} + +/** + * pm_generic_suspend - Generic suspend callback for subsystems. + * @dev: Device to suspend. + */ +int pm_generic_suspend(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_SUSPEND); +} +EXPORT_SYMBOL_GPL(pm_generic_suspend); + +/** + * pm_generic_freeze - Generic freeze callback for subsystems. + * @dev: Device to freeze. + */ +int pm_generic_freeze(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_FREEZE); +} +EXPORT_SYMBOL_GPL(pm_generic_freeze); + +/** + * pm_generic_poweroff - Generic poweroff callback for subsystems. + * @dev: Device to handle. + */ +int pm_generic_poweroff(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_HIBERNATE); +} +EXPORT_SYMBOL_GPL(pm_generic_poweroff); + +/** + * pm_generic_thaw - Generic thaw callback for subsystems. + * @dev: Device to thaw. + */ +int pm_generic_thaw(struct device *dev) +{ + return __pm_generic_call(dev, PM_EVENT_THAW); +} +EXPORT_SYMBOL_GPL(pm_generic_thaw); + +/** + * __pm_generic_resume - Generic resume/restore callback for subsystems. + * @dev: Device to handle. + * @event: PM transition of the system under way. + * + * Execute the resume/resotre callback provided by the @dev's driver, if + * defined. If it returns 0, change the device's runtime PM status to 'active'. + * Return the callback's error code. + */ +static int __pm_generic_resume(struct device *dev, int event) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + int (*callback)(struct device *); + int ret; + + if (!pm) + return 0; + + switch (event) { + case PM_EVENT_RESUME: + callback = pm->resume; + break; + case PM_EVENT_RESTORE: + callback = pm->restore; + break; + default: + callback = NULL; + break; + } + + if (!callback) + return 0; + + ret = callback(dev); + if (!ret) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + return ret; +} + +/** + * pm_generic_resume - Generic resume callback for subsystems. + * @dev: Device to resume. + */ +int pm_generic_resume(struct device *dev) +{ + return __pm_generic_resume(dev, PM_EVENT_RESUME); +} +EXPORT_SYMBOL_GPL(pm_generic_resume); + +/** + * pm_generic_restore - Generic restore callback for subsystems. + * @dev: Device to restore. + */ +int pm_generic_restore(struct device *dev) +{ + return __pm_generic_resume(dev, PM_EVENT_RESTORE); +} +EXPORT_SYMBOL_GPL(pm_generic_restore); +#endif /* CONFIG_PM_SLEEP */ + +struct dev_pm_ops generic_subsys_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .suspend = pm_generic_suspend, + .resume = pm_generic_resume, + .freeze = pm_generic_freeze, + .thaw = pm_generic_thaw, + .poweroff = pm_generic_poweroff, + .restore = pm_generic_restore, +#endif +#ifdef CONFIG_PM_RUNTIME + .runtime_suspend = pm_generic_runtime_suspend, + .runtime_resume = pm_generic_runtime_resume, + .runtime_idle = pm_generic_runtime_idle, +#endif +}; +EXPORT_SYMBOL_GPL(generic_subsys_pm_ops); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3d2ab03..305c590 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -9,7 +9,6 @@ menuconfig DRM depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU select I2C select I2C_ALGOBIT - select LIST_SORT help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index c83c975..d41811b 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -117,13 +117,20 @@ static const char *format_endpt = * However, these will come from functions that return ptrs to each of them. */ -static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq); -/* guarded by usbfs_mutex */ -static unsigned int conndiscevcnt; - -/* this struct stores the poll state for <mountpoint>/devices pollers */ -struct usb_device_status { - unsigned int lastev; +/* + * Wait for an connect/disconnect event to happen. We initialize + * the event counter with an odd number, and each event will increment + * the event counter by two, so it will always _stay_ odd. That means + * that it will never be zero, so "event 0" will never match a current + * event, and thus 'poll' will always trigger as readable for the first + * time it gets called. + */ +static struct device_connect_event { + atomic_t count; + wait_queue_head_t wait; +} device_event = { + .count = ATOMIC_INIT(1), + .wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait) }; struct class_info { @@ -157,10 +164,8 @@ static const struct class_info clas_info[] = void usbfs_conn_disc_event(void) { - mutex_lock(&usbfs_mutex); - conndiscevcnt++; - mutex_unlock(&usbfs_mutex); - wake_up(&deviceconndiscwq); + atomic_add(2, &device_event.count); + wake_up(&device_event.wait); } static const char *class_decode(const int class) @@ -632,42 +637,16 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, static unsigned int usb_device_poll(struct file *file, struct poll_table_struct *wait) { - struct usb_device_status *st; - unsigned int mask = 0; - - mutex_lock(&usbfs_mutex); - st = file->private_data; - if (!st) { - st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL); - if (!st) { - mutex_unlock(&usbfs_mutex); - return POLLIN; - } - - st->lastev = conndiscevcnt; - file->private_data = st; - mask = POLLIN; - } + unsigned int event_count; - if (file->f_mode & FMODE_READ) - poll_wait(file, &deviceconndiscwq, wait); - if (st->lastev != conndiscevcnt) - mask |= POLLIN; - st->lastev = conndiscevcnt; - mutex_unlock(&usbfs_mutex); - return mask; -} + poll_wait(file, &device_event.wait, wait); -static int usb_device_open(struct inode *inode, struct file *file) -{ - file->private_data = NULL; - return 0; -} + event_count = atomic_read(&device_event.count); + if (file->f_version != event_count) { + file->f_version = event_count; + return POLLIN | POLLRDNORM; + } -static int usb_device_release(struct inode *inode, struct file *file) -{ - kfree(file->private_data); - file->private_data = NULL; return 0; } @@ -699,6 +678,4 @@ const struct file_operations usbfs_devices_fops = { .llseek = usb_device_lseek, .read = usb_device_read, .poll = usb_device_poll, - .open = usb_device_open, - .release = usb_device_release, }; diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 1b65732..625447f 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -649,6 +649,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, goto out_req_regions; pci_set_drvdata(pci_dev, vp_dev); + pci_set_master(pci_dev); /* we use the subsystem vendor/device id as the virtio vendor/device * id. this allows us to use the same PCI vendor/device id for all diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig index 430c69f..830e3f7 100644 --- a/fs/ubifs/Kconfig +++ b/fs/ubifs/Kconfig @@ -7,7 +7,6 @@ config UBIFS_FS select CRYPTO if UBIFS_FS_ZLIB select CRYPTO_LZO if UBIFS_FS_LZO select CRYPTO_DEFLATE if UBIFS_FS_ZLIB - select LIST_SORT depends on MTD_UBI help UBIFS is a file system for flash devices which works on top of UBI. diff --git a/include/linux/pm.h b/include/linux/pm.h index e80df06..8e258c7 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -215,20 +215,59 @@ struct dev_pm_ops { int (*runtime_idle)(struct device *dev); }; +#ifdef CONFIG_PM_SLEEP +#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ + .suspend = suspend_fn, \ + .resume = resume_fn, \ + .freeze = suspend_fn, \ + .thaw = resume_fn, \ + .poweroff = suspend_fn, \ + .restore = resume_fn, +#else +#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) +#endif + +#ifdef CONFIG_PM_RUNTIME +#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ + .runtime_suspend = suspend_fn, \ + .runtime_resume = resume_fn, \ + .runtime_idle = idle_fn, +#else +#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) +#endif + /* * Use this if you want to use the same suspend and resume callbacks for suspend * to RAM and hibernation. */ #define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \ const struct dev_pm_ops name = { \ - .suspend = suspend_fn, \ - .resume = resume_fn, \ - .freeze = suspend_fn, \ - .thaw = resume_fn, \ - .poweroff = suspend_fn, \ - .restore = resume_fn, \ + SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ +} + +/* + * Use this for defining a set of PM operations to be used in all situations + * (sustem suspend, hibernation or runtime PM). + */ +#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \ +const struct dev_pm_ops name = { \ + SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ + SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ } +/* + * Use this for subsystems (bus types, device types, device classes) that don't + * need any special suspend/resume handling in addition to invoking the PM + * callbacks provided by device drivers supporting both the system sleep PM and + * runtime PM, make the pm member point to generic_subsys_pm_ops. + */ +#ifdef CONFIG_PM_OPS +extern struct dev_pm_ops generic_subsys_pm_ops; +#define GENERIC_SUBSYS_PM_OPS (&generic_subsys_pm_ops) +#else +#define GENERIC_SUBSYS_PM_OPS NULL +#endif + /** * PM_EVENT_ messages * diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 7d773aa..b776db7 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -62,6 +62,11 @@ static inline void device_set_run_wake(struct device *dev, bool enable) dev->power.run_wake = enable; } +static inline bool pm_runtime_suspended(struct device *dev) +{ + return dev->power.runtime_status == RPM_SUSPENDED; +} + #else /* !CONFIG_PM_RUNTIME */ static inline int pm_runtime_idle(struct device *dev) { return -ENOSYS; } @@ -89,6 +94,7 @@ static inline void pm_runtime_get_noresume(struct device *dev) {} static inline void pm_runtime_put_noidle(struct device *dev) {} static inline bool device_run_wake(struct device *dev) { return false; } static inline void device_set_run_wake(struct device *dev, bool enable) {} +static inline bool pm_runtime_suspended(struct device *dev) { return false; } #endif /* !CONFIG_PM_RUNTIME */ diff --git a/lib/Kconfig b/lib/Kconfig index 496d16e..170d8ca 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -160,9 +160,6 @@ config TEXTSEARCH_BM config TEXTSEARCH_FSM tristate -config LIST_SORT - boolean - config BTREE boolean diff --git a/lib/Makefile b/lib/Makefile index 59e46a0..2e152ae 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -21,7 +21,7 @@ lib-y += kobject.o kref.o klist.o obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \ bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \ - string_helpers.o gcd.o + string_helpers.o gcd.o list_sort.o ifeq ($(CONFIG_DEBUG_KOBJECT),y) CFLAGS_kobject.o += -DDEBUG @@ -40,7 +40,6 @@ lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o -obj-$(CONFIG_LIST_SORT) += list_sort.o obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o obj-$(CONFIG_BTREE) += btree.o obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o diff --git a/lib/vsprintf.c b/lib/vsprintf.c index af4aaa6..0d461c7 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -381,8 +381,8 @@ static noinline char *put_dec(char *buf, unsigned long long num) #define PLUS 4 /* show plus */ #define SPACE 8 /* space if plus */ #define LEFT 16 /* left justified */ -#define SMALL 32 /* Must be 32 == 0x20 */ -#define SPECIAL 64 /* 0x */ +#define SMALL 32 /* use lowercase in hex (must be 32 == 0x20) */ +#define SPECIAL 64 /* prefix hex with "0x", octal with "0" */ enum format_type { FORMAT_TYPE_NONE, /* Just a string part */ @@ -408,12 +408,12 @@ enum format_type { }; struct printf_spec { - enum format_type type; - int flags; /* flags to number() */ - int field_width; /* width of output field */ - int base; - int precision; /* # of digits/chars */ - int qualifier; + u16 type; + s16 field_width; /* width of output field */ + u8 flags; /* flags to number() */ + u8 base; + s8 precision; /* # of digits/chars */ + u8 qualifier; }; static char *number(char *buf, char *end, unsigned long long num, @@ -597,22 +597,29 @@ static char *resource_string(char *buf, char *end, struct resource *res, #ifndef MEM_RSRC_PRINTK_SIZE #define MEM_RSRC_PRINTK_SIZE 10 #endif - struct printf_spec hex_spec = { + static const struct printf_spec io_spec = { .base = 16, + .field_width = IO_RSRC_PRINTK_SIZE, .precision = -1, .flags = SPECIAL | SMALL | ZEROPAD, }; - struct printf_spec dec_spec = { + static const struct printf_spec mem_spec = { + .base = 16, + .field_width = MEM_RSRC_PRINTK_SIZE, + .precision = -1, + .flags = SPECIAL | SMALL | ZEROPAD, + }; + static const struct printf_spec dec_spec = { .base = 10, .precision = -1, .flags = 0, }; - struct printf_spec str_spec = { + static const struct printf_spec str_spec = { .field_width = -1, .precision = 10, .flags = LEFT, }; - struct printf_spec flag_spec = { + static const struct printf_spec flag_spec = { .base = 16, .precision = -1, .flags = SPECIAL | SMALL, @@ -628,35 +635,31 @@ static char *resource_string(char *buf, char *end, struct resource *res, 2*RSRC_BUF_SIZE + FLAG_BUF_SIZE + RAW_BUF_SIZE)]; char *p = sym, *pend = sym + sizeof(sym); - int size = -1, addr = 0; int decode = (fmt[0] == 'R') ? 1 : 0; - - if (res->flags & IORESOURCE_IO) { - size = IO_RSRC_PRINTK_SIZE; - addr = 1; - } else if (res->flags & IORESOURCE_MEM) { - size = MEM_RSRC_PRINTK_SIZE; - addr = 1; - } + const struct printf_spec *specp; *p++ = '['; - if (res->flags & IORESOURCE_IO) + if (res->flags & IORESOURCE_IO) { p = string(p, pend, "io ", str_spec); - else if (res->flags & IORESOURCE_MEM) + specp = &io_spec; + } else if (res->flags & IORESOURCE_MEM) { p = string(p, pend, "mem ", str_spec); - else if (res->flags & IORESOURCE_IRQ) + specp = &mem_spec; + } else if (res->flags & IORESOURCE_IRQ) { p = string(p, pend, "irq ", str_spec); - else if (res->flags & IORESOURCE_DMA) + specp = &dec_spec; + } else if (res->flags & IORESOURCE_DMA) { p = string(p, pend, "dma ", str_spec); - else { + specp = &dec_spec; + } else { p = string(p, pend, "??? ", str_spec); + specp = &mem_spec; decode = 0; } - hex_spec.field_width = size; - p = number(p, pend, res->start, addr ? hex_spec : dec_spec); + p = number(p, pend, res->start, *specp); if (res->start != res->end) { *p++ = '-'; - p = number(p, pend, res->end, addr ? hex_spec : dec_spec); + p = number(p, pend, res->end, *specp); } if (decode) { if (res->flags & IORESOURCE_MEM_64) @@ -1333,7 +1336,7 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) break; case FORMAT_TYPE_NRCHARS: { - int qualifier = spec.qualifier; + u8 qualifier = spec.qualifier; if (qualifier == 'l') { long *ip = va_arg(args, long *); @@ -1619,7 +1622,7 @@ do { \ case FORMAT_TYPE_NRCHARS: { /* skip %n 's argument */ - int qualifier = spec.qualifier; + u8 qualifier = spec.qualifier; void *skip_arg; if (qualifier == 'l') skip_arg = va_arg(args, long *); @@ -1885,7 +1888,9 @@ int vsscanf(const char *buf, const char *fmt, va_list args) char *next; char digit; int num = 0; - int qualifier, base, field_width; + u8 qualifier; + u8 base; + s16 field_width; bool is_sign; while (*fmt && *str) { @@ -1963,7 +1968,7 @@ int vsscanf(const char *buf, const char *fmt, va_list args) { char *s = (char *)va_arg(args, char *); if (field_width == -1) - field_width = INT_MAX; + field_width = SHORT_MAX; /* first, skip leading white space in buffer */ str = skip_spaces(str); |