diff options
37 files changed, 176 insertions, 180 deletions
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 0004402..9b82fac 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x40000000>; /* 1 GB */ }; soc { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 271855a..e041f42 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -50,27 +50,25 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <17>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>; + interrupts = <87>, <88>, <89>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 1c1937d..9e23bd8 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -51,39 +51,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 4905cf3..9659661 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -66,39 +66,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index fddd174..46c0980 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -96,8 +96,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -120,8 +120,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -141,8 +141,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index fed7d3f..cdee96f 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -26,10 +26,15 @@ }; &uart0 { status = "okay"; }; -&sdio0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; +&sdio0 { + status = "okay"; + /* sdio0 card detect is connected to wrong pin on CuBox */ + cd-gpios = <&gpio0 12 1>; +}; + &spi0 { status = "okay"; @@ -42,9 +47,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; pinctrl-names = "default"; + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_18: pmx-gpio-18 { marvell,pins = "mpp18"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 942d576..e05b18f 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -115,8 +115,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -139,8 +139,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 9bc6785..77d21ab 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,21 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 + &pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; + + pmx_ns2_sata0: pmx-ns2-sata0 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_ns2_sata1: pmx-ns2-sata1 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + }; + serial@12000 { clock-frequency = <166666667>; status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 110d6cb..d6ab442 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -36,6 +36,7 @@ reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; }; @@ -46,6 +47,7 @@ reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; }; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi index 8bbc2bf..8b36abe 100644 --- a/arch/arm/boot/dts/sunxi.dtsi +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -60,19 +60,21 @@ }; uart0: uart@01c28000 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; uart1: uart@01c28400 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 6809200..14f7c3b 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,12 +100,14 @@ ENTRY(printch) b 1b ENDPROC(printch) +#ifdef CONFIG_MMU ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] mov pc, lr ENDPROC(debug_ll_addr) +#endif #else diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3e628fd..0a2349d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -851,6 +851,7 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC + select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7f2c10c..c0c4e72 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 7191ab4..fa36fb8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); extern void imx_cpu_die(unsigned int cpu); +extern int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM extern void imx6q_pm_init(void); diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 10b0ed3..25a47c6 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("imx-fb", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3dec962..7bc5fe1 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); - imx_enable_cpu(cpu, false); + cpu_do_idle(); +} - /* spin here until hardware takes it down */ - while (1) - ; +int imx_cpu_kill(unsigned int cpu) +{ + imx_enable_cpu(cpu, false); + return 1; } diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 6c80424..e05cf40 100644 --- a/arch/arm/mach-imx/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,8 +22,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/genalloc.h> - -#include "iram.h" +#include "linux/platform_data/imx-iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 3777b80..66fae88 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = { .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, + .cpu_kill = imx_cpu_kill, #endif }; diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index a17543d..ee42d20 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state) cpu_suspend(0, imx6q_suspend_finish); imx_smp_prepare(); imx_gpc_post_resume(); + imx6q_set_lpm(WAIT_CLOCKED); break; default: return -EINVAL; diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index be50e79..e7fcea7 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) { int ret = 0; + if (!ap_syscon_base) + return -EINVAL; + if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) - return -EINVAL; } return ret; @@ -497,6 +496,13 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + pr_err("unable to remap the AP syscon for PCIv3\n"); + return; + } + pcibios_min_mem = 0x00100000; /* diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index 8821720..f4632a8 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -18,47 +18,11 @@ #include <linux/gpio.h> #include <linux/of.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data ns2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int ns2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ - MPP33_GPO, /* Fan speed (bit 2) */ - 0 -}; - #define NS2_GPIO_POWER_OFF 31 static void ns2_power_off(void) @@ -71,8 +35,6 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(ns2_mpp_config); - if (of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 5dcb369..99df4df 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,6 +1,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include +AFLAGS_coherency_ll.o := -Wa,-march=armv7-a + obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 5c8e9ce..769c1fe 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PULL_ENA), OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* UART2 - BT/FM/GPS shared transport */ + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index 7e5febe..ab7e952 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index eda079b..eb3dab6 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 5789a5e..a2cc046 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void) * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power * state when turning the ABE clock domain. Workaround this by * locking the ABE DPLL on boot. + * Lock the ABE DPLL in any case to avoid issues with audio. */ - if (cpu_is_omap446x()) { - rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); - if (!rc) - rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); - if (rc) - pr_err("%s: failed to configure ABE DPLL!\n", __func__); - } + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5e304d0..626f3ea 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) return cnt; } -static void omap_init_ocp2scp(void) +static void __init omap_init_ocp2scp(void) { struct omap_hwmod *oh; struct platform_device *pdev; diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 4c7566c..2a2cfa8 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -25,6 +25,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_data/omap_drm.h> +#include "soc.h" #include "omap_device.h" #include "omap_hwmod.h" @@ -56,7 +57,7 @@ static int __init omap_init_drm(void) oh->name); } - platform_data.omaprev = GET_OMAP_REVISION(); + platform_data.omaprev = GET_OMAP_TYPE; return platform_device_register(&omap_drm_device); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 129d508..793f54a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { * currently reset very early during boot, before I2C is * available, so it doesn't seem that we have any choice in * the kernel other than to avoid resetting it. + * + * Also, McPDM needs to be configured to NO_IDLE mode when it + * is in used otherwise vital clocks will be gated which + * results 'slow motion' audio playback. */ - .flags = HWMOD_EXT_OPT_MAIN_CLK, + .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 691aa67..b8ad6e6 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, struct device_node *np; for_each_matching_node(np, match) { - if (!of_device_is_available(np)) { - of_node_put(np); + if (!of_device_is_available(np)) continue; - } - if (property && !of_get_property(np, property, NULL)) { - of_node_put(np); + if (property && !of_get_property(np, property, NULL)) continue; - } of_add_property(np, &device_disabled); return np; diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 553059f..755c0bb 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = { .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, - .irq = S3C_EINT(5), + .irq = S3C_EINT(4), .controller_data = &wm0010_spi_csinfo, .platform_data = &wm0010_pdata, }, diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 7feb426..d2e1a16 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void) for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++) pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false); +#ifdef CONFIG_S3C_DEV_FB if (dev_get_platdata(&s3c_device_fb.dev)) pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev); +#endif return 0; } diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c index ff004578..9dd2551 100644 --- a/drivers/clk/mvebu/clk-cpu.c +++ b/drivers/clk/mvebu/clk-cpu.c @@ -124,7 +124,7 @@ void __init of_cpu_clk_setup(struct device_node *node) clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL); if (WARN_ON(!clks)) - return; + goto clks_out; for_each_node_by_type(dn, "cpu") { struct clk_init_data init; @@ -134,11 +134,11 @@ void __init of_cpu_clk_setup(struct device_node *node) int cpu, err; if (WARN_ON(!clk_name)) - return; + goto bail_out; err = of_property_read_u32(dn, "reg", &cpu); if (WARN_ON(err)) - return; + goto bail_out; sprintf(clk_name, "cpu%d", cpu); parent_clk = of_clk_get(node, 0); @@ -167,6 +167,9 @@ void __init of_cpu_clk_setup(struct device_node *node) return; bail_out: kfree(clks); + while(ncpus--) + kfree(cpuclk[ncpus].clk_name); +clks_out: kfree(cpuclk); } diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index 1cf8293..4a980e0 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -23,8 +23,8 @@ #include <linux/slab.h> #include <linux/videodev2.h> #include <linux/of.h> +#include <linux/platform_data/imx-iram.h> -#include <mach/iram.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index de4c20b..f8dd361 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -50,8 +50,6 @@ struct mvsd_host { struct timer_list timer; struct mmc_host *mmc; struct device *dev; - struct resource *res; - int irq; struct clk *clk; int gpio_card_detect; int gpio_write_protect; @@ -718,10 +716,6 @@ static int __init mvsd_probe(struct platform_device *pdev) if (!r || irq < 0 || !mvsd_data) return -ENXIO; - r = request_mem_region(r->start, SZ_1K, DRIVER_NAME); - if (!r) - return -EBUSY; - mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; @@ -731,8 +725,8 @@ static int __init mvsd_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->dev = &pdev->dev; - host->res = r; host->base_clock = mvsd_data->clock / 2; + host->clk = ERR_PTR(-EINVAL); mmc->ops = &mvsd_ops; @@ -752,7 +746,7 @@ static int __init mvsd_probe(struct platform_device *pdev) spin_lock_init(&host->lock); - host->base = ioremap(r->start, SZ_4K); + host->base = devm_request_and_ioremap(&pdev->dev, r); if (!host->base) { ret = -ENOMEM; goto out; @@ -765,44 +759,45 @@ static int __init mvsd_probe(struct platform_device *pdev) mvsd_power_down(host); - ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host); + ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host); if (ret) { pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq); goto out; - } else - host->irq = irq; + } /* Not all platforms can gate the clock, so it is not an error if the clock does not exists. */ - host->clk = clk_get(&pdev->dev, NULL); - if (!IS_ERR(host->clk)) { + host->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(host->clk)) clk_prepare_enable(host->clk); - } if (mvsd_data->gpio_card_detect) { - ret = gpio_request(mvsd_data->gpio_card_detect, - DRIVER_NAME " cd"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_card_detect, + GPIOF_IN, DRIVER_NAME " cd"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_card_detect); irq = gpio_to_irq(mvsd_data->gpio_card_detect); - ret = request_irq(irq, mvsd_card_detect_irq, - IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, - DRIVER_NAME " cd", host); + ret = devm_request_irq(&pdev->dev, irq, + mvsd_card_detect_irq, + IRQ_TYPE_EDGE_RISING | + IRQ_TYPE_EDGE_FALLING, + DRIVER_NAME " cd", host); if (ret == 0) host->gpio_card_detect = mvsd_data->gpio_card_detect; else - gpio_free(mvsd_data->gpio_card_detect); + devm_gpio_free(&pdev->dev, + mvsd_data->gpio_card_detect); } } if (!host->gpio_card_detect) mmc->caps |= MMC_CAP_NEEDS_POLL; if (mvsd_data->gpio_write_protect) { - ret = gpio_request(mvsd_data->gpio_write_protect, - DRIVER_NAME " wp"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_write_protect, + GPIOF_IN, DRIVER_NAME " wp"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_write_protect); host->gpio_write_protect = mvsd_data->gpio_write_protect; } @@ -824,26 +819,11 @@ static int __init mvsd_probe(struct platform_device *pdev) return 0; out: - if (host) { - if (host->irq) - free_irq(host->irq, host); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - if (host->base) - iounmap(host->base); - } - if (r) - release_resource(r); - if (mmc) - if (!IS_ERR_OR_NULL(host->clk)) { + if (mmc) { + if (!IS_ERR(host->clk)) clk_disable_unprepare(host->clk); - clk_put(host->clk); - } mmc_free_host(mmc); + } return ret; } @@ -852,28 +832,16 @@ static int __exit mvsd_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); - if (mmc) { - struct mvsd_host *host = mmc_priv(mmc); + struct mvsd_host *host = mmc_priv(mmc); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - mmc_remove_host(mmc); - free_irq(host->irq, host); - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - del_timer_sync(&host->timer); - mvsd_power_down(host); - iounmap(host->base); - release_resource(host->res); + mmc_remove_host(mmc); + del_timer_sync(&host->timer); + mvsd_power_down(host); + + if (!IS_ERR(host->clk)) + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); - if (!IS_ERR(host->clk)) { - clk_disable_unprepare(host->clk); - clk_put(host->clk); - } - mmc_free_host(mmc); - } platform_set_drvdata(pdev, NULL); return 0; } diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 1252678..0abf2bf 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -139,6 +139,7 @@ struct imxfb_info { struct clk *clk_ahb; struct clk *clk_per; enum imxfb_type devtype; + bool enabled; /* * These are the addresses we mapped @@ -536,6 +537,10 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi) static void imxfb_enable_controller(struct imxfb_info *fbi) { + + if (fbi->enabled) + return; + pr_debug("Enabling LCD controller\n"); writel(fbi->screen_dma, fbi->regs + LCDC_SSA); @@ -556,6 +561,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) clk_prepare_enable(fbi->clk_ipg); clk_prepare_enable(fbi->clk_ahb); clk_prepare_enable(fbi->clk_per); + fbi->enabled = true; if (fbi->backlight_power) fbi->backlight_power(1); @@ -565,6 +571,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) static void imxfb_disable_controller(struct imxfb_info *fbi) { + if (!fbi->enabled) + return; + pr_debug("Disabling LCD controller\n"); if (fbi->backlight_power) @@ -575,6 +584,7 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) clk_disable_unprepare(fbi->clk_per); clk_disable_unprepare(fbi->clk_ipg); clk_disable_unprepare(fbi->clk_ahb); + fbi->enabled = false; writel(0, fbi->regs + LCDC_RMCR); } @@ -729,6 +739,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) memset(fbi, 0, sizeof(struct imxfb_info)); + fbi->devtype = pdev->id_entry->driver_data; + strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); info->fix.type = FB_TYPE_PACKED_PIXELS; @@ -789,7 +801,6 @@ static int __init imxfb_probe(struct platform_device *pdev) return -ENOMEM; fbi = info->par; - fbi->devtype = pdev->id_entry->driver_data; if (!fb_mode) fb_mode = pdata->mode[0].mode.name; diff --git a/arch/arm/mach-imx/iram.h b/include/linux/platform_data/imx-iram.h index 022690c..022690c 100644 --- a/arch/arm/mach-imx/iram.h +++ b/include/linux/platform_data/imx-iram.h |