diff options
60 files changed, 1113 insertions, 717 deletions
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 040451e..53eb5cf 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -608,9 +608,11 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) acpi_fadt.sci_int = fadt->sci_int; #endif +#ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; +#endif #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index c1b2333..7dbf997 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:22:54 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:05:59 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -104,6 +106,7 @@ CONFIG_ZORRO_NAMES=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -116,9 +119,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_PARPORT=m # CONFIG_PARPORT_PC is not set +CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_AMIGA=m CONFIG_PARPORT_MFC3=m -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_1284=y # @@ -133,6 +137,7 @@ CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -152,6 +157,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -212,6 +218,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -225,7 +232,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -273,6 +279,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -296,7 +304,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -394,11 +401,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -470,7 +475,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -564,17 +568,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -593,21 +586,43 @@ CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_AMIGA=y # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDDLER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set CONFIG_JOYSTICK_AMIGA=m +# CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -653,6 +668,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -680,6 +699,11 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_CIRRUS=m @@ -688,6 +712,7 @@ CONFIG_FB_AMIGA_OCS=y CONFIG_FB_AMIGA_ECS=y CONFIG_FB_AMIGA_AGA=y CONFIG_FB_FM2=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -707,6 +732,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -722,10 +748,6 @@ CONFIG_DMASOUND=m # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -736,6 +758,11 @@ CONFIG_DMASOUND=m # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_AMIGA_BUILTIN_SERIAL=y @@ -758,10 +785,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -916,13 +949,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -941,7 +980,8 @@ CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -959,6 +999,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 648361b..505a296 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:22:58 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:00 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -99,6 +101,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -118,6 +121,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -137,6 +141,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -171,6 +176,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -196,6 +202,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -219,7 +227,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -320,11 +327,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -396,7 +401,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -469,16 +473,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -496,6 +490,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -536,6 +540,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -581,10 +589,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -595,6 +599,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_DN_SERIAL=y @@ -615,10 +624,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -773,13 +788,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -798,7 +819,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -816,6 +838,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 1fb25c0..617aa73 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:11 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:18 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -100,6 +102,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -112,8 +115,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_PARPORT=m # CONFIG_PARPORT_PC is not set +CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_ATARI=m -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_1284=y # @@ -125,6 +129,7 @@ CONFIG_PARPORT_1284=y # CONFIG_ATARI_FLOPPY=y # CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -144,6 +149,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -201,6 +207,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -228,6 +235,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -251,7 +260,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -349,11 +357,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -425,7 +431,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -499,17 +504,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -529,6 +523,17 @@ CONFIG_INPUT_M68K_BEEP=m CONFIG_INPUT_UINPUT=m # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -574,6 +579,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -601,9 +610,15 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -619,6 +634,7 @@ CONFIG_FONT_8x16=y # Logo configuration # # CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -634,10 +650,6 @@ CONFIG_DMASOUND=m # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -648,6 +660,11 @@ CONFIG_DMASOUND=m # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_ATARI_MFPSER=m @@ -672,9 +689,15 @@ CONFIG_REISERFS_PROC_INFO=y # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -828,13 +851,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -853,7 +882,8 @@ CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -871,6 +901,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index f1f2cf0..b501db5 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:15 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:19 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -99,6 +101,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -118,6 +121,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -137,6 +141,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -171,6 +176,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -196,6 +202,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -219,7 +227,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -320,11 +327,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -395,7 +400,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -468,16 +472,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -495,6 +489,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -535,6 +539,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -580,10 +588,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -594,6 +598,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_BVME6000_SCC=y @@ -614,10 +623,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -772,13 +787,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -797,7 +818,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -815,6 +837,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 53dde43..2bf6cef 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:40 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:21 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -100,6 +102,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -119,6 +122,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -138,6 +142,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -172,6 +177,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -197,6 +203,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -220,7 +228,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -321,11 +328,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -397,7 +402,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -470,16 +474,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -497,6 +491,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -537,6 +541,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -582,10 +590,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -596,6 +600,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # @@ -614,10 +623,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -772,13 +787,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -797,7 +818,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -815,6 +837,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 2452dac..7074f85 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:44 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:24 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -101,6 +103,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -120,6 +123,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -139,6 +143,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -196,6 +201,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -223,6 +229,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -258,7 +266,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -356,11 +363,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -435,7 +440,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -512,16 +516,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -539,6 +533,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -579,6 +583,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -606,10 +614,16 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_VALKYRIE=y CONFIG_FB_MAC=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -630,6 +644,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_MAC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -643,10 +658,6 @@ CONFIG_LOGO_MAC_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -657,6 +668,11 @@ CONFIG_LOGO_MAC_CLUT224=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_MAC_SCC=y @@ -679,10 +695,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -846,18 +868,24 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m +CONFIG_NLS_UTF8=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -876,7 +904,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -894,6 +923,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index ea38e87..61f09bc 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:49 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:28 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -99,6 +101,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -118,6 +121,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -137,6 +141,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -171,6 +176,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -197,6 +203,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -220,7 +228,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -321,11 +328,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -397,7 +402,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -470,16 +474,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -497,6 +491,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -537,6 +541,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -564,8 +572,14 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -584,6 +598,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -597,10 +612,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -611,6 +622,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_MVME147_SCC=y @@ -631,10 +647,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -791,13 +813,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -816,7 +844,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -834,6 +863,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index f931a64..69c0100 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:53 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:31 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -99,6 +101,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -118,6 +121,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -137,6 +141,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -171,6 +176,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -196,6 +202,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -219,7 +227,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -320,11 +327,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -396,7 +401,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -469,16 +473,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -496,6 +490,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -536,6 +540,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -563,8 +571,14 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -583,6 +597,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -596,10 +611,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -610,6 +621,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_MVME162_SCC=y @@ -630,10 +646,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -790,13 +812,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -815,7 +843,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -833,6 +862,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 713020c..550ec260 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:57 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:34 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -101,6 +103,7 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -123,6 +126,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -142,6 +146,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -200,6 +205,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -213,7 +219,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -250,6 +255,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -273,7 +280,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -374,11 +380,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -450,7 +454,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -539,17 +542,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -CONFIG_SERIO_Q40KBD=m -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -570,6 +562,17 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -610,6 +613,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -637,9 +644,15 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_Q40=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -658,6 +671,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -673,10 +687,6 @@ CONFIG_DMASOUND=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -687,6 +697,11 @@ CONFIG_DMASOUND=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # @@ -705,10 +720,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -863,13 +884,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -888,7 +915,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -906,6 +934,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 33c4db6..5b5a619 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:24:01 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:37 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -87,6 +89,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -106,6 +109,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -125,6 +129,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -159,6 +164,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -185,6 +191,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -208,7 +216,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -309,11 +316,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -385,7 +390,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -459,16 +463,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -486,6 +480,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -526,6 +530,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -553,8 +561,14 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -573,6 +587,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -586,10 +601,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -600,6 +611,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # @@ -618,10 +634,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -779,13 +801,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -804,7 +832,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -822,6 +851,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index fe008c9..704e423 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:24:05 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:06:40 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,23 +28,23 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -98,6 +100,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # @@ -117,6 +120,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -136,6 +140,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support @@ -170,6 +175,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -196,6 +202,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -219,7 +227,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y @@ -320,11 +327,9 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m # -# IPv6: Netfilter Configuration +# IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m @@ -396,7 +401,6 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) @@ -469,16 +473,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -496,6 +490,16 @@ CONFIG_MOUSE_SERIAL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -536,6 +540,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -563,8 +571,14 @@ CONFIG_GEN_RTC_X=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -583,6 +597,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -596,10 +611,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -610,6 +621,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # @@ -628,10 +644,16 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set @@ -789,13 +811,19 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set # # Security options @@ -814,7 +842,8 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -832,6 +861,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig index 78f57d3..5b2296e 100644 --- a/arch/m68k/defconfig +++ b/arch/m68k/defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-m68k -# Sun Dec 26 11:23:36 2004 +# Linux kernel version: 2.6.12-rc2-m68k +# Tue Apr 5 14:05:31 2005 # CONFIG_M68K=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options @@ -14,6 +15,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -25,22 +27,22 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -92,6 +94,7 @@ CONFIG_PROC_HARDWARE=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) @@ -112,6 +115,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_AMIGA_FLOPPY=y # CONFIG_AMIGA_Z2RAM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y @@ -130,6 +134,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -164,6 +169,7 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers @@ -207,7 +213,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -324,16 +329,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -353,6 +348,16 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -393,6 +398,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -420,6 +429,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -428,6 +442,7 @@ CONFIG_FB_AMIGA_OCS=y CONFIG_FB_AMIGA_ECS=y CONFIG_FB_AMIGA_AGA=y # CONFIG_FB_FM2 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -440,6 +455,7 @@ CONFIG_DUMMY_CONSOLE=y # Logo configuration # # CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -453,10 +469,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -467,6 +479,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# # Character devices # CONFIG_AMIGA_BUILTIN_SERIAL=y @@ -483,6 +500,10 @@ CONFIG_EXT2_FS=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set @@ -544,7 +565,6 @@ CONFIG_NFS_FS=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -608,7 +628,10 @@ CONFIG_NLS_CODEPAGE_437=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DEBUG_BUGVERBOSE=y # # Security options @@ -622,6 +645,10 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_CRYPTO is not set # +# Hardware crypto devices +# + +# # Library routines # # CONFIG_CRC_CCITT is not set diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 567c91c..1d3aa58 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -352,11 +352,11 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) err |= put_user(old_encode_dev(stat->rdev), &statbuf->st_rdev); err |= put_user(stat->size, &statbuf->st_size); err |= put_user(stat->atime.tv_sec, &statbuf->st_atime); - err |= put_user(0, &statbuf->__unused1); + err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec); err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime); - err |= put_user(0, &statbuf->__unused2); + err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec); err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime); - err |= put_user(0, &statbuf->__unused3); + err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec); err |= put_user(stat->blksize, &statbuf->st_blksize); err |= put_user(stat->blocks, &statbuf->st_blocks); err |= put_user(0, &statbuf->__unused4[0]); @@ -365,6 +365,68 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) return err; } +int cp_compat_stat64(struct kstat *stat, struct compat_stat64 __user *statbuf) +{ + int err; + + err = put_user(huge_encode_dev(stat->dev), &statbuf->st_dev); + err |= put_user(stat->ino, &statbuf->st_ino); + err |= put_user(stat->mode, &statbuf->st_mode); + err |= put_user(stat->nlink, &statbuf->st_nlink); + err |= put_user(stat->uid, &statbuf->st_uid); + err |= put_user(stat->gid, &statbuf->st_gid); + err |= put_user(huge_encode_dev(stat->rdev), &statbuf->st_rdev); + err |= put_user(0, (unsigned long __user *) &statbuf->__pad3[0]); + err |= put_user(stat->size, &statbuf->st_size); + err |= put_user(stat->blksize, &statbuf->st_blksize); + err |= put_user(0, (unsigned int __user *) &statbuf->__pad4[0]); + err |= put_user(0, (unsigned int __user *) &statbuf->__pad4[4]); + err |= put_user(stat->blocks, &statbuf->st_blocks); + err |= put_user(stat->atime.tv_sec, &statbuf->st_atime); + err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec); + err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime); + err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec); + err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime); + err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec); + err |= put_user(0, &statbuf->__unused4); + err |= put_user(0, &statbuf->__unused5); + + return err; +} + +asmlinkage long compat_sys_stat64(char __user * filename, + struct compat_stat64 __user *statbuf) +{ + struct kstat stat; + int error = vfs_stat(filename, &stat); + + if (!error) + error = cp_compat_stat64(&stat, statbuf); + return error; +} + +asmlinkage long compat_sys_lstat64(char __user * filename, + struct compat_stat64 __user *statbuf) +{ + struct kstat stat; + int error = vfs_lstat(filename, &stat); + + if (!error) + error = cp_compat_stat64(&stat, statbuf); + return error; +} + +asmlinkage long compat_sys_fstat64(unsigned int fd, + struct compat_stat64 __user * statbuf) +{ + struct kstat stat; + int error = vfs_fstat(fd, &stat); + + if (!error) + error = cp_compat_stat64(&stat, statbuf); + return error; +} + asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2) { return sys_sysfs(option, arg1, arg2); diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index a4ccb65..a5e36a4 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -32,7 +32,7 @@ sys_call_table32: .word sys32_umount, sys32_setgid16, sys32_getgid16, sys32_signal, sys32_geteuid16 /*50*/ .word sys32_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl .word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve -/*60*/ .word sys32_umask, sys_chroot, compat_sys_newfstat, sys_fstat64, sys_getpagesize +/*60*/ .word sys32_umask, sys_chroot, compat_sys_newfstat, compat_sys_fstat64, sys_getpagesize .word sys32_msync, sys_vfork, sys32_pread64, sys32_pwrite64, sys_geteuid /*70*/ .word sys_getegid, sys_mmap, sys_setreuid, sys_munmap, sys_mprotect .word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys32_getgroups16 @@ -46,8 +46,8 @@ sys_call_table32: .word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd /*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod .word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate -/*130*/ .word sys_ftruncate, sys_flock, sys_lstat64, sys_nis_syscall, sys_nis_syscall - .word sys_nis_syscall, sys32_mkdir, sys_rmdir, sys32_utimes, sys_stat64 +/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall + .word sys_nis_syscall, sys32_mkdir, sys_rmdir, sys32_utimes, compat_sys_stat64 /*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit .word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write /*150*/ .word sys_nis_syscall, sys_nis_syscall, sys_nis_syscall, sys_poll, sys_getdents64 @@ -98,7 +98,7 @@ sys_call_table: .word sys_umount, sys_setgid, sys_getgid, sys_signal, sys_geteuid /*50*/ .word sys_getegid, sys_acct, sys_memory_ordering, sys_nis_syscall, sys_ioctl .word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve -/*60*/ .word sys_umask, sys_chroot, sys_newfstat, sys_nis_syscall, sys_getpagesize +/*60*/ .word sys_umask, sys_chroot, sys_newfstat, sys_stat64, sys_getpagesize .word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall /*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect .word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups @@ -112,8 +112,8 @@ sys_call_table: .word sys_nis_syscall, sys_gettimeofday, sys_getrusage, sys_getsockopt, sys_getcwd /*120*/ .word sys_readv, sys_writev, sys_settimeofday, sys_fchown, sys_fchmod .word sys_recvfrom, sys_setreuid, sys_setregid, sys_rename, sys_truncate -/*130*/ .word sys_ftruncate, sys_flock, sys_nis_syscall, sys_sendto, sys_shutdown - .word sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_nis_syscall +/*130*/ .word sys_ftruncate, sys_flock, sys_lstat64, sys_sendto, sys_shutdown + .word sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64 /*140*/ .word sys_sendfile64, sys_getpeername, sys_futex, sys_gettid, sys_getrlimit .word sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write /*150*/ .word sys_getsockname, sys_nis_syscall, sys_nis_syscall, sys_poll, sys_getdents64 diff --git a/drivers/block/scsi_ioctl.c b/drivers/block/scsi_ioctl.c index 689527a..681871c 100644 --- a/drivers/block/scsi_ioctl.c +++ b/drivers/block/scsi_ioctl.c @@ -328,11 +328,6 @@ static int sg_io(struct file *file, request_queue_t *q, return 0; } -#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) -#define START_STOP_TIMEOUT (60 * HZ) -#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) -#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) -#define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) #define OMAX_SB_LEN 16 /* For backward compatibility */ static int sg_scsi_ioctl(struct file *file, request_queue_t *q, diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index 5fc5004..1fb5cdf 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -54,6 +54,9 @@ extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int); +static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd, + unsigned long arg); + static spinlock_t i2o_config_lock; #define MODINC(x,y) ((x) = ((x) + 1) % (y)) @@ -538,8 +541,7 @@ static int i2o_cfg_evt_get(unsigned long arg, struct file *fp) } #ifdef CONFIG_COMPAT -static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg, - struct file *file) +static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg) { struct i2o_cmd_passthru32 __user *cmd; struct i2o_controller *c; @@ -752,7 +754,26 @@ static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg, return rcode; } -#else +static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg) +{ + int ret; + lock_kernel(); + switch (cmd) { + case I2OGETIOPS: + ret = i2o_cfg_ioctl(NULL, file, cmd, arg); + break; + case I2OPASSTHRU32: + ret = i2o_cfg_passthru32(file, cmd, arg); + break; + default: + ret = -ENOIOCTLCMD; + break; + } + unlock_kernel(); + return ret; +} + +#endif static int i2o_cfg_passthru(unsigned long arg) { @@ -958,7 +979,6 @@ static int i2o_cfg_passthru(unsigned long arg) kfree(reply); return rcode; } -#endif /* * IOCTL Handler @@ -1013,11 +1033,9 @@ static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd, ret = i2o_cfg_evt_get(arg, fp); break; -#ifndef CONFIG_COMPAT case I2OPASSTHRU: ret = i2o_cfg_passthru(arg); break; -#endif default: osm_debug("unknown ioctl called!\n"); @@ -1105,6 +1123,9 @@ static struct file_operations config_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .ioctl = i2o_cfg_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = i2o_cfg_compat_ioctl, +#endif .open = cfg_open, .release = cfg_release, .fasync = cfg_fasync, @@ -1134,19 +1155,11 @@ static int __init i2o_config_init(void) misc_deregister(&i2o_miscdev); return -EBUSY; } -#ifdef CONFIG_COMPAT - register_ioctl32_conversion(I2OPASSTHRU32, i2o_cfg_passthru32); - register_ioctl32_conversion(I2OGETIOPS, (void *)sys_ioctl); -#endif return 0; } static void i2o_config_exit(void) { -#ifdef CONFIG_COMPAT - unregister_ioctl32_conversion(I2OPASSTHRU32); - unregister_ioctl32_conversion(I2OGETIOPS); -#endif misc_deregister(&i2o_miscdev); i2o_driver_unregister(&i2o_config_driver); } diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 6a43322..a393cf4 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -89,10 +89,10 @@ MODULE_DESCRIPTION ("FCP (SCSI over Fibre Channel) HBA driver for IBM eServer zSeries"); MODULE_LICENSE("GPL"); -module_param(device, charp, 0); +module_param(device, charp, 0400); MODULE_PARM_DESC(device, "specify initial device"); -module_param(loglevel, uint, 0); +module_param(loglevel, uint, 0400); MODULE_PARM_DESC(loglevel, "log levels, 8 nibbles: " "FC ERP QDIO CIO Config FSF SCSI Other, " diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 53fcccb..0afa1c4 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -70,7 +70,7 @@ /********************* GENERAL DEFINES *********************************/ /* zfcp version number, it consists of major, minor, and patch-level number */ -#define ZFCP_VERSION "4.2.0" +#define ZFCP_VERSION "4.3.0" /** * zfcp_sg_to_address - determine kernel address from struct scatterlist @@ -851,6 +851,9 @@ struct zfcp_adapter { wwn_t wwnn; /* WWNN */ wwn_t wwpn; /* WWPN */ fc_id_t s_id; /* N_Port ID */ + wwn_t peer_wwnn; /* P2P peer WWNN */ + wwn_t peer_wwpn; /* P2P peer WWPN */ + fc_id_t peer_d_id; /* P2P peer D_ID */ struct ccw_device *ccw_device; /* S/390 ccw device */ u8 fc_service_class; u32 fc_topology; /* FC topology */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index cfc0d8c..53ebc1cd 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -2568,6 +2568,23 @@ zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *erp_action) case ZFCP_ERP_STEP_UNINITIALIZED: case ZFCP_ERP_STEP_PHYS_PORT_CLOSING: case ZFCP_ERP_STEP_PORT_CLOSING: + if (adapter->fc_topology == FSF_TOPO_P2P) { + if (port->wwpn != adapter->peer_wwpn) { + ZFCP_LOG_NORMAL("Failed to open port 0x%016Lx " + "on adapter %s.\nPeer WWPN " + "0x%016Lx does not match\n", + port->wwpn, + zfcp_get_busid_by_adapter(adapter), + adapter->peer_wwpn); + zfcp_erp_port_failed(port); + retval = ZFCP_ERP_FAILED; + break; + } + port->d_id = adapter->peer_d_id; + atomic_set_mask(ZFCP_STATUS_PORT_DID_DID, &port->status); + retval = zfcp_erp_port_strategy_open_port(erp_action); + break; + } if (!(adapter->nameserver_port)) { retval = zfcp_nameserver_enqueue(adapter); if (retval != 0) { @@ -3516,8 +3533,9 @@ zfcp_erp_adapter_access_changed(struct zfcp_adapter *adapter) debug_text_event(adapter->erp_dbf, 3, "a_access_unblock"); debug_event(adapter->erp_dbf, 3, &adapter->name, 8); - zfcp_erp_port_access_changed(adapter->nameserver_port); read_lock_irqsave(&zfcp_data.config_lock, flags); + if (adapter->nameserver_port) + zfcp_erp_port_access_changed(adapter->nameserver_port); list_for_each_entry(port, &adapter->port_list_head, list) if (port != adapter->nameserver_port) zfcp_erp_port_access_changed(port); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 578b9fb..148b11c 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -2107,6 +2107,9 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok) bottom->low_qtcb_version, bottom->high_qtcb_version); adapter->fsf_lic_version = bottom->lic_version; adapter->supported_features = bottom->supported_features; + adapter->peer_wwpn = 0; + adapter->peer_wwnn = 0; + adapter->peer_d_id = 0; if (xchg_ok) { adapter->wwnn = bottom->nport_serv_param.wwnn; @@ -2124,13 +2127,19 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok) adapter->hydra_version = 0; } + if (adapter->fc_topology == FSF_TOPO_P2P) { + adapter->peer_d_id = bottom->peer_d_id & ZFCP_DID_MASK; + adapter->peer_wwpn = bottom->plogi_payload.wwpn; + adapter->peer_wwnn = bottom->plogi_payload.wwnn; + } + if(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT){ adapter->hardware_version = bottom->hardware_version; memcpy(adapter->serial_number, bottom->serial_number, 17); EBCASC(adapter->serial_number, sizeof(adapter->serial_number)); } - ZFCP_LOG_INFO("The adapter %s reported the following characteristics:\n" + ZFCP_LOG_NORMAL("The adapter %s reported the following characteristics:\n" "WWNN 0x%016Lx, " "WWPN 0x%016Lx, " "S_ID 0x%08x,\n" @@ -2194,14 +2203,18 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req) switch (adapter->fc_topology) { case FSF_TOPO_P2P: ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n"); - ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel " - "configuration detected at adapter %s " - "unsupported, shutting down adapter\n", - zfcp_get_busid_by_adapter(adapter)); + ZFCP_LOG_NORMAL("Point-to-Point fibrechannel " + "configuration detected at adapter %s\n" + "Peer WWNN 0x%016llx, " + "peer WWPN 0x%016llx, " + "peer d_id 0x%06x\n", + zfcp_get_busid_by_adapter(adapter), + adapter->peer_wwnn, + adapter->peer_wwpn, + adapter->peer_d_id); debug_text_event(fsf_req->adapter->erp_dbf, 0, "top-p-to-p"); - zfcp_erp_adapter_shutdown(adapter, 0); - return -EIO; + break; case FSF_TOPO_AL: ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n"); ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel " @@ -2226,6 +2239,7 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req) "of a type known to the zfcp " "driver, shutting down adapter\n", zfcp_get_busid_by_adapter(adapter)); + adapter->fc_topology = FSF_TOPO_ERROR; debug_text_exception(fsf_req->adapter->erp_dbf, 0, "unknown-topo"); zfcp_erp_adapter_shutdown(adapter, 0); @@ -4281,6 +4295,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req) bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); zfcp_cmd_dbf_event_fsf("undeffcp", fsf_req, NULL, 0); set_host_byte(&scpnt->result, DID_ERROR); + goto skip_fsfstatus; } } @@ -4334,7 +4349,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req) scpnt->resid = fcp_rsp_iu->fcp_resid; if (scpnt->request_bufflen - scpnt->resid < scpnt->underflow) - scpnt->result |= DID_ERROR << 16; + set_host_byte(&scpnt->result, DID_ERROR); } skip_fsfstatus: @@ -4607,6 +4622,13 @@ zfcp_fsf_control_file_handler(struct zfcp_fsf_req *fsf_req) if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) { switch (header->fsf_status_qual.word[0]) { + case FSF_SQ_CFDC_HARDENED_ON_SE: + ZFCP_LOG_NORMAL( + "CFDC on the adapter %s has being " + "hardened on primary and secondary SE\n", + zfcp_get_busid_by_adapter(adapter)); + break; + case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE: ZFCP_LOG_NORMAL( "CFDC of the adapter %s could not " diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h index 5889956..07140df 100644 --- a/drivers/s390/scsi/zfcp_fsf.h +++ b/drivers/s390/scsi/zfcp_fsf.h @@ -129,6 +129,7 @@ #define FSF_SQ_NO_RETRY_POSSIBLE 0x07 /* FSF status qualifier for CFDC commands */ +#define FSF_SQ_CFDC_HARDENED_ON_SE 0x00000000 #define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE 0x00000001 #define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2 0x00000002 /* CFDC subtable codes */ @@ -357,7 +358,6 @@ struct fsf_nport_serv_param { u8 class3_serv_param[16]; u8 class4_serv_param[16]; u8 vendor_version_level[16]; - u8 res1[16]; } __attribute__ ((packed)); struct fsf_plogi { @@ -415,11 +415,13 @@ struct fsf_qtcb_bottom_config { u8 res2[12]; u32 s_id; struct fsf_nport_serv_param nport_serv_param; + u8 reserved_nport_serv_param[16]; u8 res3[8]; u32 adapter_ports; u32 hardware_version; u8 serial_number[32]; - u8 res4[272]; + struct fsf_nport_serv_param plogi_payload; + u8 res4[160]; } __attribute__ ((packed)); struct fsf_qtcb_bottom_port { diff --git a/drivers/s390/scsi/zfcp_sysfs_adapter.c b/drivers/s390/scsi/zfcp_sysfs_adapter.c index ff28ade..23e2dca 100644 --- a/drivers/s390/scsi/zfcp_sysfs_adapter.c +++ b/drivers/s390/scsi/zfcp_sysfs_adapter.c @@ -65,6 +65,9 @@ ZFCP_DEFINE_ADAPTER_ATTR(status, "0x%08x\n", atomic_read(&adapter->status)); ZFCP_DEFINE_ADAPTER_ATTR(wwnn, "0x%016llx\n", adapter->wwnn); ZFCP_DEFINE_ADAPTER_ATTR(wwpn, "0x%016llx\n", adapter->wwpn); ZFCP_DEFINE_ADAPTER_ATTR(s_id, "0x%06x\n", adapter->s_id); +ZFCP_DEFINE_ADAPTER_ATTR(peer_wwnn, "0x%016llx\n", adapter->peer_wwnn); +ZFCP_DEFINE_ADAPTER_ATTR(peer_wwpn, "0x%016llx\n", adapter->peer_wwpn); +ZFCP_DEFINE_ADAPTER_ATTR(peer_d_id, "0x%06x\n", adapter->peer_d_id); ZFCP_DEFINE_ADAPTER_ATTR(card_version, "0x%04x\n", adapter->hydra_version); ZFCP_DEFINE_ADAPTER_ATTR(lic_version, "0x%08x\n", adapter->fsf_lic_version); ZFCP_DEFINE_ADAPTER_ATTR(fc_link_speed, "%d Gb/s\n", adapter->fc_link_speed); @@ -255,6 +258,9 @@ static struct attribute *zfcp_adapter_attrs[] = { &dev_attr_wwnn.attr, &dev_attr_wwpn.attr, &dev_attr_s_id.attr, + &dev_attr_peer_wwnn.attr, + &dev_attr_peer_wwpn.attr, + &dev_attr_peer_d_id.attr, &dev_attr_card_version.attr, &dev_attr_lic_version.attr, &dev_attr_fc_link_speed.attr, diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c index 8ead55f..2341d27 100644 --- a/drivers/scsi/53c7xx.c +++ b/drivers/scsi/53c7xx.c @@ -280,6 +280,7 @@ #endif #include "scsi.h" +#include <scsi/scsi_dbg.h> #include <scsi/scsi_host.h> #include "53c7xx.h" #include <linux/stat.h> @@ -1721,9 +1722,9 @@ NCR53c7xx_run_tests (struct Scsi_Host *host) { printk ("scsi%d : test 2 INQUIRY to target %d, lun 0 : %s\n", host->host_no, i, data + 8); printk ("scsi%d : status ", host->host_no); - print_status (status); + scsi_print_status (status); printk ("\nscsi%d : message ", host->host_no); - print_msg (&msg); + scsi_print_msg (&msg); printk ("\n"); } else if (hostdata->test_completed == 3) { printk("scsi%d : test 2 no connection with target %d\n", @@ -2312,7 +2313,7 @@ NCR53c7x0_dstat_sir_intr (struct Scsi_Host *host, struct printk ("scsi%d : received message", host->host_no); if (c) printk (" from target %d lun %d ", c->device->id, c->device->lun); - print_msg ((unsigned char *) hostdata->msg_buf); + scsi_print_msg ((unsigned char *) hostdata->msg_buf); printk("\n"); } @@ -3204,7 +3205,7 @@ create_cmd (Scsi_Cmnd *cmd) { case WRITE_10: #if 0 printk("scsi%d : command is ", host->host_no); - print_command(cmd->cmnd); + __scsi_print_command(cmd->cmnd); #endif #if 0 printk ("scsi%d : %d scatter/gather segments\n", host->host_no, @@ -3232,7 +3233,7 @@ create_cmd (Scsi_Cmnd *cmd) { */ default: printk("scsi%d : datain+dataout for command ", host->host_no); - print_command(cmd->cmnd); + __scsi_print_command(cmd->cmnd); datain = dataout = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3; } @@ -3938,7 +3939,7 @@ intr_scsi (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) { if (cmd) { printk("scsi%d : target %d, lun %d, command ", host->host_no, cmd->cmd->device->id, cmd->cmd->device->lun); - print_command (cmd->cmd->cmnd); + __scsi_print_command (cmd->cmd->cmnd); printk("scsi%d : dsp = 0x%x (virt 0x%p)\n", host->host_no, NCR53c7x0_read32(DSP_REG), bus_to_virt(NCR53c7x0_read32(DSP_REG))); @@ -4208,7 +4209,7 @@ restart: if (hostdata->options & OPTION_DEBUG_INTR) { printk ("scsi%d : command complete : pid %lu, id %d,lun %d result 0x%x ", host->host_no, tmp->pid, tmp->device->id, tmp->device->lun, tmp->result); - print_command (tmp->cmnd); + __scsi_print_command (tmp->cmnd); } tmp->scsi_done(tmp); @@ -4297,7 +4298,7 @@ NCR53c7x0_intr (int irq, void *dev_id, struct pt_regs * regs) printk("scsi%d : interrupt for pid %lu, id %d, lun %d ", host->host_no, cmd->cmd->pid, (int) cmd->cmd->device->id, (int) cmd->cmd->device->lun); - print_command (cmd->cmd->cmnd); + __scsi_print_command (cmd->cmd->cmnd); } else { printk("scsi%d : no active command\n", host->host_no); } @@ -5539,7 +5540,7 @@ print_dsa (struct Scsi_Host *host, u32 *dsa, const char *prefix) { i > 0 && !check_address ((unsigned long) ptr, 1); ptr += len, i -= len) { printk(" "); - len = print_msg (ptr); + len = scsi_print_msg (ptr); printk("\n"); if (!len) break; @@ -5554,7 +5555,7 @@ print_dsa (struct Scsi_Host *host, u32 *dsa, const char *prefix) { if (cmd) { printk(" result = 0x%x, target = %d, lun = %d, cmd = ", cmd->result, cmd->device->id, cmd->device->lun); - print_command(cmd->cmnd); + __scsi_print_command(cmd->cmnd); } else printk("\n"); printk(" + %d : dsa_next = 0x%x\n", hostdata->dsa_next, @@ -6028,7 +6029,7 @@ dump_events (struct Scsi_Host *host, int count) { virt_to_bus(event.dsa), event.dsa); if (event.pid != -1) { printk (" event for pid %ld ", event.pid); - print_command (event.cmnd); + __scsi_print_command (event.cmnd); } } } diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index 41b5197..15e4b12 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -2958,13 +2958,6 @@ static int BusLogic_AbortCommand(struct scsi_cmnd *Command) struct BusLogic_CCB *CCB; BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested); /* - If this Command has already completed, then no Abort is necessary. - */ - if (Command->serial_number != Command->serial_number_at_timeout) { - BusLogic_Warning("Unable to Abort Command to Target %d - " "Already Completed\n", HostAdapter, TargetID); - return SUCCESS; - } - /* Attempt to find an Active CCB for this Command. If no Active CCB for this Command is found, then no Abort is necessary. */ diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 5e71a0b..770fa84 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -86,6 +86,7 @@ * 5. Test linked command handling code after Eric is ready with * the high level code. */ +#include <scsi/scsi_dbg.h> #if (NDEBUG & NDEBUG_LISTS) #define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); } @@ -2371,7 +2372,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since print_msg() wants the whole thing. + * byte, since scsi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ @@ -2418,7 +2419,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { default: if (!tmp) { printk("scsi%d: rejecting message ", instance->host_no); - print_msg(extended_msg); + scsi_print_msg(extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) printk("scsi%d: rejecting unknown message %02x from target %d, lun %d\n", instance->host_no, tmp, cmd->device->id, cmd->device->lun); @@ -2552,7 +2553,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) { if (!(msg[0] & 0x80)) { printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no); - print_msg(msg); + scsi_print_msg(msg); abort = 1; } else { /* Accept message by clearing ACK */ @@ -2677,7 +2678,7 @@ static int NCR5380_abort(Scsi_Cmnd * cmd) { Scsi_Cmnd *tmp, **prev; printk(KERN_WARNING "scsi%d : aborting command\n", instance->host_no); - print_Scsi_Cmnd(cmd); + scsi_print_command(cmd); NCR5380_print_status(instance); diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 9962c51..04cb5c4 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -9198,16 +9198,13 @@ asc_prt_scsi_cmnd(struct scsi_cmnd *s) s->use_sg, s->sglist_len, s->abort_reason); printk( -" serial_number 0x%x, serial_number_at_timeout 0x%x, retries %d, allowed %d\n", - (unsigned) s->serial_number, (unsigned) s->serial_number_at_timeout, - s->retries, s->allowed); +" serial_number 0x%x, retries %d, allowed %d\n", + (unsigned) s->serial_number, s->retries, s->allowed); printk( " timeout_per_command %d, timeout_total %d, timeout %d\n", s->timeout_per_command, s->timeout_total, s->timeout); - printk(" internal_timeout %u\n", s->internal_timeout); - printk( " scsi_done 0x%lx, done 0x%lx, host_scribble 0x%lx, result 0x%x\n", (ulong) s->scsi_done, (ulong) s->done, diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index d7b8efe..88d119f 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -257,6 +257,7 @@ #include <scsi/scsicam.h> #include "scsi.h" +#include <scsi/scsi_dbg.h> #include <scsi/scsi_host.h> #include "aha152x.h" @@ -986,7 +987,7 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int p if (HOSTDATA(shpnt)->debug & debug_queue) { printk(INFO_LEAD "queue: %p; cmd_len=%d pieces=%d size=%u cmnd=", CMDINFO(SCpnt), SCpnt, SCpnt->cmd_len, SCpnt->use_sg, SCpnt->request_bufflen); - print_command(SCpnt->cmnd); + __scsi_print_command(SCpnt->cmnd); } #endif @@ -1560,7 +1561,7 @@ static void busfree_run(struct Scsi_Host *shpnt) #if 0 if(HOSTDATA(shpnt)->debug & debug_eh) { printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC)); - print_sense("bh", DONE_SC); + scsi_print_sense("bh", DONE_SC); } #endif @@ -1846,7 +1847,7 @@ static void msgi_run(struct Scsi_Host *shpnt) #if defined(AHA152X_DEBUG) if (HOSTDATA(shpnt)->debug & debug_msgi) { printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0)); - print_msg(&MSGI(0)); + scsi_print_msg(&MSGI(0)); printk("\n"); } #endif @@ -1934,7 +1935,7 @@ static void msgi_run(struct Scsi_Host *shpnt) break; printk(INFO_LEAD, CMDINFO(CURRENT_SC)); - print_msg(&MSGI(0)); + scsi_print_msg(&MSGI(0)); printk("\n"); ticks = (MSGI(3) * 4 + 49) / 50; @@ -2032,7 +2033,7 @@ static void msgo_init(struct Scsi_Host *shpnt) int i; printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC)); - for (i=0; i<MSGOLEN; i+=print_msg(&MSGO(i)), printk(" ")) + for (i=0; i<MSGOLEN; i+=scsi_print_msg(&MSGO(i)), printk(" ")) ; printk(")\n"); } @@ -2104,7 +2105,7 @@ static void cmd_init(struct Scsi_Host *shpnt) #if defined(AHA152X_DEBUG) if (HOSTDATA(shpnt)->debug & debug_cmd) { printk(DEBUG_LEAD "cmd_init: ", CMDINFO(CURRENT_SC)); - print_command(CURRENT_SC->cmnd); + __scsi_print_command(CURRENT_SC->cmnd); } #endif @@ -2158,7 +2159,7 @@ static void status_run(struct Scsi_Host *shpnt) #if defined(AHA152X_DEBUG) if (HOSTDATA(shpnt)->debug & debug_status) { printk(DEBUG_LEAD "inbound status %02x ", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.Status); - print_status(CURRENT_SC->SCp.Status); + scsi_print_status(CURRENT_SC->SCp.Status); printk("\n"); } #endif @@ -2925,7 +2926,7 @@ static void show_command(Scsi_Cmnd *ptr) printk(KERN_DEBUG "0x%08x: target=%d; lun=%d; cmnd=(", (unsigned int) ptr, ptr->device->id, ptr->device->lun); - print_command(ptr->cmnd); + __scsi_print_command(ptr->cmnd); printk(KERN_DEBUG "); request_bufflen=%d; resid=%d; phase |", ptr->request_bufflen, ptr->resid); diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 24dd0b8..be2caec 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -150,6 +150,7 @@ #include <asm/ecard.h> #include "../scsi.h" +#include <scsi/scsi_dbg.h> #include <scsi/scsi_host.h> #include "acornscsi.h" #include "msgqueue.h" @@ -866,7 +867,7 @@ void acornscsi_done(AS_Host *host, Scsi_Cmnd **SCpntp, unsigned int result) default: printk(KERN_ERR "scsi%d.H: incomplete data transfer detected: result=%08X command=", host->host->host_no, SCpnt->result); - print_command(SCpnt->cmnd); + __scsi_print_command(SCpnt->cmnd); acornscsi_dumpdma(host, "done"); acornscsi_dumplog(host, SCpnt->device->id); SCpnt->result &= 0xffff; @@ -1369,7 +1370,7 @@ void acornscsi_sendmessage(AS_Host *host) host->scsi.last_message = msg->msg[0]; #if (DEBUG & DEBUG_MESSAGES) - print_msg(msg->msg); + scsi_print_msg(msg->msg); #endif break; @@ -1391,7 +1392,7 @@ void acornscsi_sendmessage(AS_Host *host) while ((msg = msgqueue_getmsg(&host->scsi.msgs, msgnr++)) != NULL) { unsigned int i; #if (DEBUG & DEBUG_MESSAGES) - print_msg(msg); + scsi_print_msg(msg); #endif i = 0; if (acornscsi_write_pio(host, msg->msg, &i, msg->length, 1000000)) @@ -1487,7 +1488,7 @@ void acornscsi_message(AS_Host *host) #if (DEBUG & DEBUG_MESSAGES) printk("scsi%d.%c: message in: ", host->host->host_no, acornscsi_target(host)); - print_msg(message); + scsi_print_msg(message); printk("\n"); #endif diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 5411e85..0a172c1 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -52,6 +52,7 @@ #include <asm/ecard.h> #include "../scsi.h" +#include <scsi/scsi_dbg.h> #include <scsi/scsi_host.h> #include "fas216.h" #include "scsi.h" @@ -309,7 +310,7 @@ fas216_log_command(FAS216_Info *info, int level, Scsi_Cmnd *SCpnt, char *fmt, .. va_end(args); printk(" CDB: "); - print_command(SCpnt->cmnd); + __scsi_print_command(SCpnt->cmnd); } static void @@ -2081,7 +2082,7 @@ fas216_std_done(FAS216_Info *info, Scsi_Cmnd *SCpnt, unsigned int result) info->host->host_no, '0' + SCpnt->device->id, SCpnt->result, info->scsi.SCp.ptr, info->scsi.SCp.this_residual); - print_command(SCpnt->cmnd); + __scsi_print_command(SCpnt->cmnd); SCpnt->result &= ~(255 << 16); SCpnt->result |= DID_BAD_TARGET << 16; goto request_sense; @@ -2170,7 +2171,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result) info->host->host_no, '0' + SCpnt->device->id, info->scsi.SCp.ptr, info->scsi.SCp.this_residual); info->scsi.SCp.ptr = NULL; - print_command(SCpnt->cmnd); + __scsi_print_command(SCpnt->cmnd); } /* @@ -2426,7 +2427,7 @@ int fas216_eh_abort(Scsi_Cmnd *SCpnt) info->stats.aborts += 1; printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no); - print_command(SCpnt->data_cmnd); + __scsi_print_command(SCpnt->data_cmnd); print_debug_list(); fas216_dumpstate(info); diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index 2f1b3f4..48e1c4d 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -108,7 +108,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt) #if 0 //def BELT_AND_BRACES printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for " "command ", SCpnt->host->host_no, '0' + SCpnt->target); - print_command(SCpnt->cmnd); + __scsi_print_command(SCpnt->cmnd); #endif SCpnt->SCp.ptr = NULL; } diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 5d1e78e..2c12be7 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -73,6 +73,7 @@ * 1. Test linked command handling code after Eric is ready with * the high level code. */ +#include <scsi/scsi_dbg.h> #if (NDEBUG & NDEBUG_LISTS) #define LIST(x,y) \ @@ -2354,7 +2355,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since print_msg() wants the whole thing. + * byte, since scsi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ @@ -2407,7 +2408,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) default: if (!tmp) { printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO); - print_msg (extended_msg); + scsi_print_msg (extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) printk(KERN_DEBUG "scsi%d: rejecting unknown " @@ -2540,7 +2541,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) if (!(msg[0] & 0x80)) { printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO); - print_msg(msg); + scsi_print_msg(msg); do_abort(instance); return; } @@ -2646,7 +2647,7 @@ int NCR5380_abort (Scsi_Cmnd *cmd) unsigned long flags; printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO); - print_Scsi_Cmnd (cmd); + scsi_print_command(cmd); NCR5380_print_status (instance); diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index d625fde..ec16173 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -372,7 +372,7 @@ static void scsi_print_cdb(unsigned char *cdb, int cdb_len, int start_of_line) /** * - * print_status - print scsi status description + * scsi_print_status - print scsi status description * @scsi_status: scsi status value * * If the status is recognized, the description is printed. diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index e46096d..47c263e 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -833,13 +833,6 @@ ips_eh_abort(Scsi_Cmnd * SC) if (!ha->active) return (FAILED); - if (SC->serial_number != SC->serial_number_at_timeout) { - /* HMM, looks like a bogus command */ - DEBUG(1, "Abort called with bogus scsi command"); - - return (FAILED); - } - /* See if the command is on the copp queue */ item = ha->copp_waitlist.head; while ((item) && (item->scsi_cmd != SC)) diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 7ae1323..2a0e42e 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -7486,24 +7486,14 @@ static int ncr53c8xx_abort(struct scsi_cmnd *cmd) struct scsi_cmnd *done_list; #if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS - printk("ncr53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n", - cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout); + printk("ncr53c8xx_abort: pid=%lu serial_number=%ld\n", + cmd->pid, cmd->serial_number); #else printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid); #endif NCR_LOCK_NCB(np, flags); -#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS - /* - * We have to just ignore abort requests in some situations. - */ - if (cmd->serial_number != cmd->serial_number_at_timeout) { - sts = SCSI_ABORT_NOT_RUNNING; - goto out; - } -#endif - sts = ncr_abort_command(np, cmd); out: done_list = np->done_list; diff --git a/drivers/scsi/pci2000.c b/drivers/scsi/pci2000.c index 60ce1cc..d58f303 100644 --- a/drivers/scsi/pci2000.c +++ b/drivers/scsi/pci2000.c @@ -438,8 +438,8 @@ int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) if ( bus ) { DEB (if(*cdb) printk ("\nCDB: %X- %X %X %X %X %X %X %X %X %X %X ", SCpnt->cmd_len, cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9])); - DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d, internal_timout: %d", SCpnt->timeout_per_command, - SCpnt->timeout_total, SCpnt->timeout, SCpnt->internal_timeout)); + DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d", SCpnt->timeout_per_command, + SCpnt->timeout_total, SCpnt->timeout)); outl (SCpnt->timeout_per_command, padapter->mb1); outb_p (CMD_SCSI_TIMEOUT, padapter->cmd); if ( WaitReady (padapter) ) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index dcc33da..0e8ebbc 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1050,10 +1050,8 @@ qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd) for (i = 0; i < cmd->cmd_len; i++) { printk("0x%02x ", cmd->cmnd[i]); } - printk("\n seg_cnt=%d, allowed=%d, retries=%d, " - "serial_number_at_timeout=0x%lx\n", - cmd->use_sg, cmd->allowed, cmd->retries, - cmd->serial_number_at_timeout); + printk("\n seg_cnt=%d, allowed=%d, retries=%d\n", + cmd->use_sg, cmd->allowed, cmd->retries); printk(" request buffer=0x%p, request buffer len=0x%x\n", cmd->request_buffer, cmd->request_bufflen); printk(" tag=%d, transfersize=0x%x\n", diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 2e7ab3a..05d2bd0 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -489,7 +489,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) scsi_print_command(cmd); if (status_byte(cmd->result) & CHECK_CONDITION) { /* - * XXX The print_sense formatting/prefix + * XXX The scsi_print_sense formatting/prefix * doesn't match this function. */ scsi_print_sense("", cmd); @@ -686,7 +686,6 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq) cmd->request = sreq->sr_request; memcpy(cmd->data_cmnd, sreq->sr_cmnd, sizeof(cmd->data_cmnd)); cmd->serial_number = 0; - cmd->serial_number_at_timeout = 0; cmd->bufflen = sreq->sr_bufflen; cmd->buffer = sreq->sr_buffer; cmd->retries = 0; @@ -716,7 +715,6 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq) /* * Start the timer ticking. */ - cmd->internal_timeout = NORMAL_TIMEOUT; cmd->abort_reason = 0; cmd->result = 0; @@ -766,7 +764,6 @@ void __scsi_done(struct scsi_cmnd *cmd) * Set the serial numbers back to zero */ cmd->serial_number = 0; - cmd->serial_number_at_timeout = 0; cmd->state = SCSI_STATE_BHQUEUE; cmd->owner = SCSI_OWNER_BH_HANDLER; diff --git a/drivers/scsi/scsi.h b/drivers/scsi/scsi.h index cb6b5fb..e2360c2 100644 --- a/drivers/scsi/scsi.h +++ b/drivers/scsi/scsi.h @@ -23,7 +23,6 @@ #include <linux/config.h> /* for CONFIG_SCSI_LOGGING */ #include <scsi/scsi_cmnd.h> -#include <scsi/scsi_dbg.h> #include <scsi/scsi_device.h> #include <scsi/scsi_eh.h> #include <scsi/scsi_request.h> @@ -61,48 +60,6 @@ struct scatterlist; #define scsi_to_pci_dma_dir(scsi_dir) ((int)(scsi_dir)) #define scsi_to_sbus_dma_dir(scsi_dir) ((int)(scsi_dir)) -/* - * Old names for debug prettyprinting functions. - */ -static inline void print_Scsi_Cmnd(struct scsi_cmnd *cmd) -{ - return scsi_print_command(cmd); -} -static inline void print_command(unsigned char *cdb) -{ - return __scsi_print_command(cdb); -} -static inline void print_sense(const char *devclass, struct scsi_cmnd *cmd) -{ - return scsi_print_sense(devclass, cmd); -} -static inline void print_req_sense(const char *devclass, struct scsi_request *req) -{ - return scsi_print_req_sense(devclass, req); -} -static inline void print_driverbyte(int scsiresult) -{ - return scsi_print_driverbyte(scsiresult); -} -static inline void print_hostbyte(int scsiresult) -{ - return scsi_print_hostbyte(scsiresult); -} -static inline void print_status(unsigned char status) -{ - return scsi_print_status(status); -} -static inline int print_msg(const unsigned char *msg) -{ - return scsi_print_msg(msg); -} - -/* - * This is the crap from the old error handling code. We have it in a special - * place so that we can more easily delete it later on. - */ -#include "scsi_obsolete.h" - /* obsolete typedef junk. */ #include "scsi_typedefs.h" diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 9bc597b..203a081 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -79,11 +79,6 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) */ scmd->owner = SCSI_OWNER_ERROR_HANDLER; scmd->state = SCSI_STATE_FAILED; - /* - * Set the serial_number_at_timeout to the current - * serial_number - */ - scmd->serial_number_at_timeout = scmd->serial_number; list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q); set_bit(SHOST_RECOVERY, &shost->shost_state); shost->host_failed++; @@ -1061,7 +1056,6 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd) SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n", __FUNCTION__)); scmd->owner = SCSI_OWNER_LOWLEVEL; - scmd->serial_number_at_timeout = scmd->serial_number; if (!scmd->device->host->hostt->eh_bus_reset_handler) return FAILED; @@ -1093,7 +1087,6 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd) SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n", __FUNCTION__)); scmd->owner = SCSI_OWNER_LOWLEVEL; - scmd->serial_number_at_timeout = scmd->serial_number; if (!scmd->device->host->hostt->eh_host_reset_handler) return FAILED; @@ -1313,6 +1306,9 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) case DID_IMM_RETRY: return NEEDS_RETRY; + case DID_REQUEUE: + return ADD_TO_MLQUEUE; + case DID_ERROR: if (msg_byte(scmd->result) == COMMAND_COMPLETE && status_byte(scmd->result) == RESERVATION_CONFLICT) @@ -1839,7 +1835,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag) scmd->bufflen = 0; scmd->request_buffer = NULL; scmd->request_bufflen = 0; - scmd->internal_timeout = NORMAL_TIMEOUT; scmd->abort_reason = DID_ABORT; scmd->cmd_len = 0; diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index 68c9728..7a6b530 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -27,11 +27,6 @@ #define NORMAL_RETRIES 5 #define IOCTL_NORMAL_TIMEOUT (10 * HZ) -#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) -#define START_STOP_TIMEOUT (60 * HZ) -#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) -#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) -#define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) /* ZIP-250 on parallel port takes as long! */ #define MAX_BUF PAGE_SIZE diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 7cbc412..619d3fb 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -298,7 +298,6 @@ static int scsi_init_cmd_errh(struct scsi_cmnd *cmd) { cmd->owner = SCSI_OWNER_MIDLEVEL; cmd->serial_number = 0; - cmd->serial_number_at_timeout = 0; cmd->abort_reason = 0; memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer); @@ -320,7 +319,6 @@ static int scsi_init_cmd_errh(struct scsi_cmnd *cmd) memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd)); cmd->buffer = cmd->request_buffer; cmd->bufflen = cmd->request_bufflen; - cmd->internal_timeout = NORMAL_TIMEOUT; cmd->abort_reason = 0; return 1; diff --git a/drivers/scsi/scsi_obsolete.h b/drivers/scsi/scsi_obsolete.h deleted file mode 100644 index abeacb9..0000000 --- a/drivers/scsi/scsi_obsolete.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * scsi_obsolete.h Copyright (C) 1997 Eric Youngdale - * - */ - -#ifndef _SCSI_OBSOLETE_H -#define _SCSI_OBSOLETE_H - -/* - * These are the return codes for the abort and reset functions. The mid-level - * code uses these to decide what to do next. Each of the low level abort - * and reset functions must correctly indicate what it has done. - * The descriptions are written from the point of view of the mid-level code, - * so that the return code is telling the mid-level drivers exactly what - * the low level driver has already done, and what remains to be done. - */ - -/* We did not do anything. - * Wait some more for this command to complete, and if this does not work, - * try something more serious. */ -#define SCSI_ABORT_SNOOZE 0 - -/* This means that we were able to abort the command. We have already - * called the mid-level done function, and do not expect an interrupt that - * will lead to another call to the mid-level done function for this command */ -#define SCSI_ABORT_SUCCESS 1 - -/* We called for an abort of this command, and we should get an interrupt - * when this succeeds. Thus we should not restore the timer for this - * command in the mid-level abort function. */ -#define SCSI_ABORT_PENDING 2 - -/* Unable to abort - command is currently on the bus. Grin and bear it. */ -#define SCSI_ABORT_BUSY 3 - -/* The command is not active in the low level code. Command probably - * finished. */ -#define SCSI_ABORT_NOT_RUNNING 4 - -/* Something went wrong. The low level driver will indicate the correct - * error condition when it calls scsi_done, so the mid-level abort function - * can simply wait until this comes through */ -#define SCSI_ABORT_ERROR 5 - -/* We do not know how to reset the bus, or we do not want to. Bummer. - * Anyway, just wait a little more for the command in question, and hope that - * it eventually finishes. If it never finishes, the SCSI device could - * hang, so use this with caution. */ -#define SCSI_RESET_SNOOZE 0 - -/* We do not know how to reset the bus, or we do not want to. Bummer. - * We have given up on this ever completing. The mid-level code will - * request sense information to decide how to proceed from here. */ -#define SCSI_RESET_PUNT 1 - -/* This means that we were able to reset the bus. We have restarted all of - * the commands that should be restarted, and we should be able to continue - * on normally from here. We do not expect any interrupts that will return - * DID_RESET to any of the other commands in the host_queue, and the mid-level - * code does not need to do anything special to keep the commands alive. - * If a hard reset was performed then all outstanding commands on the - * bus have been restarted. */ -#define SCSI_RESET_SUCCESS 2 - -/* We called for a reset of this bus, and we should get an interrupt - * when this succeeds. Each command should get its own status - * passed up to scsi_done, but this has not happened yet. - * If a hard reset was performed, then we expect an interrupt - * for *each* of the outstanding commands that will have the - * effect of restarting the commands. - */ -#define SCSI_RESET_PENDING 3 - -/* We did a reset, but do not expect an interrupt to signal DID_RESET. - * This tells the upper level code to request the sense info, and this - * should keep the command alive. */ -#define SCSI_RESET_WAKEUP 4 - -/* The command is not active in the low level code. Command probably - finished. */ -#define SCSI_RESET_NOT_RUNNING 5 - -/* Something went wrong, and we do not know how to fix it. */ -#define SCSI_RESET_ERROR 6 - -#define SCSI_RESET_SYNCHRONOUS 0x01 -#define SCSI_RESET_ASYNCHRONOUS 0x02 -#define SCSI_RESET_SUGGEST_BUS_RESET 0x04 -#define SCSI_RESET_SUGGEST_HOST_RESET 0x08 -/* - * This is a bitmask that is ored with one of the above codes. - * It tells the mid-level code that we did a hard reset. - */ -#define SCSI_RESET_BUS_RESET 0x100 -/* - * This is a bitmask that is ored with one of the above codes. - * It tells the mid-level code that we did a host adapter reset. - */ -#define SCSI_RESET_HOST_RESET 0x200 -/* - * Used to mask off bits and to obtain the basic action that was - * performed. - */ -#define SCSI_RESET_ACTION 0xff - -#endif /* SCSI_OBSOLETE_H */ diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index aca3b39..c01580df 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -30,11 +30,6 @@ struct Scsi_Host; #define SCSI_REQ_MAGIC 0x75F6D354 /* - * Flag bit for the internal_timeout array - */ -#define NORMAL_TIMEOUT 0 - -/* * Scsi Error Handler Flags */ #define scsi_eh_eflags_chk(scp, flags) \ diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c index b362ff2..4c95abb 100644 --- a/drivers/scsi/seagate.c +++ b/drivers/scsi/seagate.c @@ -103,6 +103,7 @@ #include <asm/uaccess.h> #include "scsi.h" +#include <scsi/scsi_dbg.h> #include <scsi/scsi_host.h> #include "seagate.h" @@ -746,7 +747,7 @@ static int internal_command (unsigned char target, unsigned char lun, #if (DEBUG & PRINT_COMMAND) printk("scsi%d : target = %d, command = ", hostno, target); - print_command((unsigned char *) cmnd); + __scsi_print_command((unsigned char *) cmnd); #endif #if (DEBUG & PHASE_RESELECT) @@ -1553,7 +1554,7 @@ connect_loop: printk("\n"); #endif printk("scsi%d : status = ", hostno); - print_status(status); + scsi_print_status(status); printk(" message = %02x\n", message); #endif diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index fd72d73..cf6b1f0 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -51,6 +51,7 @@ static int sg_version_num = 30532; /* 2 digits for each component */ #include <linux/delay.h> #include "scsi.h" +#include <scsi/scsi_dbg.h> #include <scsi/scsi_host.h> #include <scsi/scsi_driver.h> #include <scsi/scsi_ioctl.h> @@ -1311,7 +1312,7 @@ sg_cmd_done(Scsi_Cmnd * SCpnt) if ((sdp->sgdebug > 0) && ((CHECK_CONDITION == srp->header.masked_status) || (COMMAND_TERMINATED == srp->header.masked_status))) - print_req_sense("sg_cmd_done", SRpnt); + scsi_print_req_sense("sg_cmd_done", SRpnt); /* Following if statement is a patch supplied by Eric Youngdale */ if (driver_byte(SRpnt->sr_result) != 0 diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 9081139..7e19589 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -69,6 +69,7 @@ * finally replaced that by the *_PRINTK() macros. * */ +#include <scsi/scsi_dbg.h> /* * Further development / testing that should be done : @@ -2377,7 +2378,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since print_msg() wants the whole thing. + * byte, since scsi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ @@ -2430,7 +2431,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) default: if (!tmp) { printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO); - print_msg (extended_msg); + scsi_print_msg (extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) printk(KERN_DEBUG "scsi%d: rejecting unknown " @@ -2565,7 +2566,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) if (!(msg[0] & 0x80)) { printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO); - print_msg(msg); + scsi_print_msg(msg); do_abort(instance); return; } @@ -2691,7 +2692,7 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) unsigned long flags; printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO); - print_Scsi_Cmnd (cmd); + scsi_print_command(cmd); NCR5380_print_status (instance); diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index a1dff6d..5ff83d2 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -799,12 +799,6 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname); -#if 0 - /* This one should be the result of some race, thus to ignore */ - if (cmd->serial_number != cmd->serial_number_at_timeout) - goto prepare; -#endif - /* This one is queued in some place -> to wait for completion */ FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index 7484916..a00095c 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -945,7 +945,7 @@ static int ultrastor_abort(Scsi_Cmnd *SCpnt) config.mscp[mscp_index].SCint, SCpnt); #endif if (config.mscp[mscp_index].SCint == 0) - return SCSI_ABORT_NOT_RUNNING; + return FAILURE; if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort"); config.mscp[mscp_index].SCint = NULL; @@ -1020,7 +1020,7 @@ static int ultrastor_host_reset(Scsi_Cmnd * SCpnt) #endif spin_unlock_irqrestore(host->host_lock, flags); - return SCSI_RESET_SUCCESS; + return SUCCESS; } diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index de0d32f..cab89a9 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -335,7 +335,7 @@ static int mts_scsi_abort (Scsi_Cmnd *srb) mts_urb_abort(desc); - return SCSI_ABORT_PENDING; + return FAILURE; } static int mts_scsi_host_reset (Scsi_Cmnd *srb) diff --git a/fs/compat.c b/fs/compat.c index a912bdf..67c0b94 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -31,6 +31,7 @@ #include <linux/smb.h> #include <linux/smb_mount.h> #include <linux/ncp_mount.h> +#include <linux/nfs4_mount.h> #include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/ctype.h> @@ -806,10 +807,79 @@ static void *do_smb_super_data_conv(void *raw_data) return raw_data; } +struct compat_nfs_string { + compat_uint_t len; + compat_uptr_t __user data; +}; + +static inline void compat_nfs_string(struct nfs_string *dst, + struct compat_nfs_string *src) +{ + dst->data = compat_ptr(src->data); + dst->len = src->len; +} + +struct compat_nfs4_mount_data_v1 { + compat_int_t version; + compat_int_t flags; + compat_int_t rsize; + compat_int_t wsize; + compat_int_t timeo; + compat_int_t retrans; + compat_int_t acregmin; + compat_int_t acregmax; + compat_int_t acdirmin; + compat_int_t acdirmax; + struct compat_nfs_string client_addr; + struct compat_nfs_string mnt_path; + struct compat_nfs_string hostname; + compat_uint_t host_addrlen; + compat_uptr_t __user host_addr; + compat_int_t proto; + compat_int_t auth_flavourlen; + compat_uptr_t __user auth_flavours; +}; + +static int do_nfs4_super_data_conv(void *raw_data) +{ + int version = *(compat_uint_t *) raw_data; + + if (version == 1) { + struct compat_nfs4_mount_data_v1 *raw = raw_data; + struct nfs4_mount_data *real = raw_data; + + /* copy the fields backwards */ + real->auth_flavours = compat_ptr(raw->auth_flavours); + real->auth_flavourlen = raw->auth_flavourlen; + real->proto = raw->proto; + real->host_addr = compat_ptr(raw->host_addr); + real->host_addrlen = raw->host_addrlen; + compat_nfs_string(&real->hostname, &raw->hostname); + compat_nfs_string(&real->mnt_path, &raw->mnt_path); + compat_nfs_string(&real->client_addr, &raw->client_addr); + real->acdirmax = raw->acdirmax; + real->acdirmin = raw->acdirmin; + real->acregmax = raw->acregmax; + real->acregmin = raw->acregmin; + real->retrans = raw->retrans; + real->timeo = raw->timeo; + real->wsize = raw->wsize; + real->rsize = raw->rsize; + real->flags = raw->flags; + real->version = raw->version; + } + else { + return -EINVAL; + } + + return 0; +} + extern int copy_mount_options (const void __user *, unsigned long *); #define SMBFS_NAME "smbfs" #define NCPFS_NAME "ncpfs" +#define NFS4_NAME "nfs4" asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name, char __user * type, unsigned long flags, @@ -845,6 +915,9 @@ asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name, do_smb_super_data_conv((void *)data_page); } else if (!strcmp((char *)type_page, NCPFS_NAME)) { do_ncp_super_data_conv((void *)data_page); + } else if (!strcmp((char *)type_page, NFS4_NAME)) { + if (do_nfs4_super_data_conv((void *) data_page)) + goto out4; } } @@ -853,6 +926,7 @@ asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name, flags, (void*)data_page); unlock_kernel(); + out4: free_page(data_page); out3: free_page(dev_page); diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h index d1f63ca..8467084 100644 --- a/include/asm-sparc/unistd.h +++ b/include/asm-sparc/unistd.h @@ -79,7 +79,7 @@ #define __NR_umask 60 /* Common */ #define __NR_chroot 61 /* Common */ #define __NR_fstat 62 /* Common */ -#define __NR_fstat64 63 /* Linux sparc32 Specific */ +#define __NR_fstat64 63 /* Linux Specific */ #define __NR_getpagesize 64 /* Common */ #define __NR_msync 65 /* Common in newer 1.3.x revs... */ #define __NR_vfork 66 /* Common */ @@ -148,14 +148,14 @@ #define __NR_truncate 129 /* Common */ #define __NR_ftruncate 130 /* Common */ #define __NR_flock 131 /* Common */ -#define __NR_lstat64 132 /* Linux sparc32 Specific */ +#define __NR_lstat64 132 /* Linux Specific */ #define __NR_sendto 133 /* Common */ #define __NR_shutdown 134 /* Common */ #define __NR_socketpair 135 /* Common */ #define __NR_mkdir 136 /* Common */ #define __NR_rmdir 137 /* Common */ #define __NR_utimes 138 /* SunOS Specific */ -#define __NR_stat64 139 /* Linux sparc32 Specific */ +#define __NR_stat64 139 /* Linux Specific */ #define __NR_sendfile64 140 /* adjtime under SunOS */ #define __NR_getpeername 141 /* Common */ #define __NR_futex 142 /* gethostid under SunOS */ diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h index 2950279..22f5805 100644 --- a/include/asm-sparc64/compat.h +++ b/include/asm-sparc64/compat.h @@ -51,16 +51,50 @@ struct compat_stat { compat_dev_t st_rdev; compat_off_t st_size; compat_time_t st_atime; - u32 __unused1; + compat_ulong_t st_atime_nsec; compat_time_t st_mtime; - u32 __unused2; + compat_ulong_t st_mtime_nsec; compat_time_t st_ctime; - u32 __unused3; + compat_ulong_t st_ctime_nsec; compat_off_t st_blksize; compat_off_t st_blocks; u32 __unused4[2]; }; +struct compat_stat64 { + unsigned long long st_dev; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned int st_uid; + unsigned int st_gid; + + unsigned long long st_rdev; + + unsigned char __pad3[8]; + + long long st_size; + unsigned int st_blksize; + + unsigned char __pad4[8]; + unsigned int st_blocks; + + unsigned int st_atime; + unsigned int st_atime_nsec; + + unsigned int st_mtime; + unsigned int st_mtime_nsec; + + unsigned int st_ctime; + unsigned int st_ctime_nsec; + + unsigned int __unused4; + unsigned int __unused5; +}; + struct compat_flock { short l_type; short l_whence; diff --git a/include/asm-sparc64/stat.h b/include/asm-sparc64/stat.h index 48e0661..128c27e 100644 --- a/include/asm-sparc64/stat.h +++ b/include/asm-sparc64/stat.h @@ -21,43 +21,28 @@ struct stat { unsigned long __unused4[2]; }; -#ifdef __KERNEL__ -/* This is sparc32 stat64 structure. */ - struct stat64 { - unsigned long long st_dev; - - unsigned long long st_ino; + unsigned long st_dev; + unsigned long st_ino; + unsigned long st_nlink; unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; unsigned int st_gid; - - unsigned long long st_rdev; - - unsigned char __pad3[8]; - - long long st_size; - unsigned int st_blksize; - - unsigned char __pad4[8]; - unsigned int st_blocks; - - unsigned int st_atime; - unsigned int st_atime_nsec; - - unsigned int st_mtime; - unsigned int st_mtime_nsec; - - unsigned int st_ctime; - unsigned int st_ctime_nsec; - - unsigned int __unused4; - unsigned int __unused5; + unsigned int __pad0; + + unsigned long st_rdev; + long st_size; + long st_blksize; + long st_blocks; + + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + long __unused[3]; }; #endif - -#endif diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h index 3c00065..5b8dcf5 100644 --- a/include/asm-sparc64/unistd.h +++ b/include/asm-sparc64/unistd.h @@ -79,7 +79,7 @@ #define __NR_umask 60 /* Common */ #define __NR_chroot 61 /* Common */ #define __NR_fstat 62 /* Common */ -/* #define __NR_fstat64 63 Linux sparc32 Specific */ +#define __NR_fstat64 63 /* Linux Specific */ #define __NR_getpagesize 64 /* Common */ #define __NR_msync 65 /* Common in newer 1.3.x revs... */ #define __NR_vfork 66 /* Common */ @@ -148,14 +148,14 @@ #define __NR_truncate 129 /* Common */ #define __NR_ftruncate 130 /* Common */ #define __NR_flock 131 /* Common */ -/* #define __NR_lstat64 132 Linux sparc32 Specific */ +#define __NR_lstat64 132 /* Linux Specific */ #define __NR_sendto 133 /* Common */ #define __NR_shutdown 134 /* Common */ #define __NR_socketpair 135 /* Common */ #define __NR_mkdir 136 /* Common */ #define __NR_rmdir 137 /* Common */ #define __NR_utimes 138 /* SunOS Specific */ -/* #define __NR_stat64 139 Linux sparc32 Specific */ +#define __NR_stat64 139 /* Linux Specific */ #define __NR_sendfile64 140 /* adjtime under SunOS */ #define __NR_getpeername 141 /* Common */ #define __NR_futex 142 /* gethostid under SunOS */ diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 1d54c06..659ecf4 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -295,6 +295,8 @@ struct scsi_lun { #define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */ #define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */ #define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */ +#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also + * without decrementing the retry count */ #define DRIVER_OK 0x00 /* Driver status */ /* @@ -360,6 +362,15 @@ struct scsi_lun { #define sense_error(sense) ((sense) & 0xf) #define sense_valid(sense) ((sense) & 0x80); +/* + * default timeouts +*/ +#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) +#define START_STOP_TIMEOUT (60 * HZ) +#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) +#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) +#define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) + #define IDENTIFY_BASE 0x80 #define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\ diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 9d9871c..07f5c69 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -43,21 +43,17 @@ struct scsi_cmnd { void (*done) (struct scsi_cmnd *); /* Mid-level done function */ /* - * A SCSI Command is assigned a nonzero serial_number when internal_cmnd - * passes it to the driver's queue command function. The serial_number - * is cleared when scsi_done is entered indicating that the command has - * been completed. If a timeout occurs, the serial number at the moment - * of timeout is copied into serial_number_at_timeout. By subsequently - * comparing the serial_number and serial_number_at_timeout fields - * during abort or reset processing, we can detect whether the command - * has already completed. This also detects cases where the command has - * completed and the SCSI Command structure has already being reused - * for another command, so that we can avoid incorrectly aborting or - * resetting the new command. - * The serial number is only unique per host. + * A SCSI Command is assigned a nonzero serial_number before passed + * to the driver's queue command function. The serial_number is + * cleared when scsi_done is entered indicating that the command + * has been completed. It currently doesn't have much use other + * than printk's. Some lldd's use this number for other purposes. + * It's almost certain that such usages are either incorrect or + * meaningless. Please kill all usages other than printk's. Also, + * as this number is always identical to ->pid, please convert + * printk's to use ->pid, so that we can kill this field. */ unsigned long serial_number; - unsigned long serial_number_at_timeout; int retries; int allowed; @@ -65,12 +61,6 @@ struct scsi_cmnd { int timeout_total; int timeout; - /* - * We handle the timeout differently if it happens when a reset, - * abort, etc are in process. - */ - unsigned volatile char internal_timeout; - unsigned char cmd_len; unsigned char old_cmd_len; enum dma_data_direction sc_data_direction; diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 8c45485..6f19313 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -610,6 +610,33 @@ static inline void audit_free_context(struct audit_context *context) printk(KERN_ERR "audit: freed %d contexts\n", count); } +static void audit_log_task_info(struct audit_buffer *ab) +{ + char name[sizeof(current->comm)]; + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + + get_task_comm(name, current); + audit_log_format(ab, " comm=%s", name); + + if (!mm) + return; + + down_read(&mm->mmap_sem); + vma = mm->mmap; + while (vma) { + if ((vma->vm_flags & VM_EXECUTABLE) && + vma->vm_file) { + audit_log_d_path(ab, "exe=", + vma->vm_file->f_dentry, + vma->vm_file->f_vfsmnt); + break; + } + vma = vma->vm_next; + } + up_read(&mm->mmap_sem); +} + static void audit_log_exit(struct audit_context *context) { int i; @@ -639,6 +666,7 @@ static void audit_log_exit(struct audit_context *context) context->gid, context->euid, context->suid, context->fsuid, context->egid, context->sgid, context->fsgid); + audit_log_task_info(ab); audit_log_end(ab); while (context->aux) { struct audit_aux_data *aux; diff --git a/kernel/sched.c b/kernel/sched.c index f69c4a5..9bb7489 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2648,9 +2648,9 @@ need_resched_nonpreemptible: schedstat_inc(rq, sched_cnt); now = sched_clock(); - if (likely((long long)now - prev->timestamp < NS_MAX_SLEEP_AVG)) { + if (likely((long long)(now - prev->timestamp) < NS_MAX_SLEEP_AVG)) { run_time = now - prev->timestamp; - if (unlikely((long long)now - prev->timestamp < 0)) + if (unlikely((long long)(now - prev->timestamp) < 0)) run_time = 0; } else run_time = NS_MAX_SLEEP_AVG; @@ -2728,7 +2728,7 @@ go_idle: if (!rt_task(next) && next->activated > 0) { unsigned long long delta = now - next->timestamp; - if (unlikely((long long)now - next->timestamp < 0)) + if (unlikely((long long)(now - next->timestamp) < 0)) delta = 0; if (next->activated == 1) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index fe6285e..85a6f66 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -532,7 +532,6 @@ void avc_audit(u32 ssid, u32 tsid, u16 tclass, u32 requested, struct av_decision *avd, int result, struct avc_audit_data *a) { - struct task_struct *tsk = current; struct inode *inode = NULL; u32 denied, audited; struct audit_buffer *ab; @@ -556,39 +555,6 @@ void avc_audit(u32 ssid, u32 tsid, audit_log_format(ab, "avc: %s ", denied ? "denied" : "granted"); avc_dump_av(ab, tclass,audited); audit_log_format(ab, " for "); - if (a && a->tsk) - tsk = a->tsk; - if (tsk && tsk->pid) { - struct mm_struct *mm; - struct vm_area_struct *vma; - audit_log_format(ab, " pid=%d", tsk->pid); - if (tsk == current) - mm = current->mm; - else - mm = get_task_mm(tsk); - if (mm) { - if (down_read_trylock(&mm->mmap_sem)) { - vma = mm->mmap; - while (vma) { - if ((vma->vm_flags & VM_EXECUTABLE) && - vma->vm_file) { - audit_log_d_path(ab, "exe=", - vma->vm_file->f_dentry, - vma->vm_file->f_vfsmnt); - break; - } - vma = vma->vm_next; - } - up_read(&mm->mmap_sem); - } else { - audit_log_format(ab, " comm=%s", tsk->comm); - } - if (tsk != current) - mmput(mm); - } else { - audit_log_format(ab, " comm=%s", tsk->comm); - } - } if (a) { switch (a->type) { case AVC_AUDIT_DATA_IPC: |