diff options
105 files changed, 1834 insertions, 896 deletions
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c279158..196b8b9 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -32,7 +32,7 @@ The Linux DRM layer contains code intended to support the needs of complex graphics devices, usually containing programmable pipelines well suited to 3D graphics acceleration. Graphics - drivers in the kernel can make use of DRM functions to make + drivers in the kernel may make use of DRM functions to make tasks like memory management, interrupt handling and DMA easier, and provide a uniform interface to applications. </para> @@ -57,10 +57,10 @@ existing drivers. </para> <para> - First, we'll go over some typical driver initialization + First, we go over some typical driver initialization requirements, like setting up command buffers, creating an initial output configuration, and initializing core services. - Subsequent sections will cover core internals in more detail, + Subsequent sections cover core internals in more detail, providing implementation notes and examples. </para> <para> @@ -74,7 +74,7 @@ </para> <para> The core of every DRM driver is struct drm_driver. Drivers - will typically statically initialize a drm_driver structure, + typically statically initialize a drm_driver structure, then pass it to drm_init() at load time. </para> @@ -88,8 +88,8 @@ </para> <programlisting> static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | @@ -154,8 +154,8 @@ </programlisting> <para> In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports. - We'll go over the individual callbacks in later sections. Since + sets several flags indicating what core features it supports; + we go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -203,8 +203,8 @@ <term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term> <listitem> <para> - DRIVER_HAVE_IRQ indicates whether the driver has a IRQ - handler, DRIVER_IRQ_SHARED indicates whether the device & + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ + handler. DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). </para> @@ -214,8 +214,8 @@ <term>DRIVER_DMA_QUEUE</term> <listitem> <para> - If the driver queues DMA requests and completes them - asynchronously, this flag should be set. Deprecated. + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. </para> </listitem> </varlistentry> @@ -238,7 +238,7 @@ </variablelist> <para> In this specific case, the driver requires AGP and supports - IRQs. DMA, as we'll see, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device-specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -269,36 +269,34 @@ initial output configuration. </para> <para> - Note that the tasks performed at driver load time must not - conflict with DRM client requirements. For instance, if user + If compatibility is a concern (e.g. with drivers converted over + to the new interfaces from the old ones), care must be taken to + prevent device initialization and control that is incompatible with + currently active userspace drivers. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. - Likewise, if pre-memory management aware user level drivers are + Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to - be omitted. These requirements are driver specific, and care + be omitted. These requirements are driver-specific, and care needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are - enabled at load time or in legacy fashion. If compatibility is - a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent incompatible - device initialization and control with the currently active - userspace drivers. + enabled at load time or in legacy fashion. </para> <sect2> <title>Driver private & performance counters</title> <para> The driver private hangs off the main drm_device structure and - can be used for tracking various device specific bits of + can be used for tracking various device-specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a - driver can simply allocate one and set drm_device.dev_priv - appropriately; at unload the driver can free it and set - drm_device.dev_priv to NULL. + driver may simply allocate one and set drm_device.dev_priv + appropriately; it should be freed and drm_device.dev_priv set + to NULL when the driver is unloaded. </para> <para> - The DRM supports several counters which can be used for rough + The DRM supports several counters which may be used for rough performance characterization. Note that the DRM stat counter system is not often used by applications, and supporting additional counters is completely optional. @@ -307,15 +305,15 @@ These interfaces are deprecated and should not be used. If performance monitoring is desired, the developer should investigate and potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information to performance monitoring - tools and applications. + GPU related performance information for consumption by performance + monitoring tools and applications. </para> </sect2> <sect2> <title>Configuring the device</title> <para> - Obviously, device configuration will be device specific. + Obviously, device configuration is device-specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -323,10 +321,10 @@ <para> Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() can be used to find BARs on the given + drm_get_resource_len(), may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you'll probably want a + mapping for the BAR in question. Note that you probably want a drm_local_map_t in your driver private structure to track any mappings you create. <!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* --> @@ -335,20 +333,20 @@ <para> if compatibility with other operating systems isn't a concern (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls can be used for the above, e.g. pci_resource_* + native Linux calls may be used for the above, e.g. pci_resource_* and iomap*/iounmap. See the Linux device driver book for more info. </para> <para> - Once you have a register map, you can use the DRM_READn() and + Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or - use driver specific versions to offset into your MMIO space - relative to a driver specific base pointer (see I915_READ for - example). + use driver-specific versions to offset into your MMIO space + relative to a driver-specific base pointer (see I915_READ for + an example). </para> <para> If your device supports interrupt generation, you may want to - setup an interrupt handler at driver load time as well. This + set up an interrupt handler when the driver is loaded. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before @@ -357,7 +355,7 @@ </para> <!--!Fdrivers/char/drm/drm_irq.c drm_irq_install--> <para> - Once your interrupt handler is registered (it'll use your + Once your interrupt handler is registered (it uses your drm_driver.irq_handler as the actual interrupt handling function), you can safely enable interrupts on your device, assuming any other state your interrupt handler uses is also @@ -371,10 +369,10 @@ using the pci_map_rom() call, a convenience function that takes care of mapping the actual ROM, whether it has been shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that once you've - mapped the ROM and extracted any necessary information, be - sure to unmap it; on many devices the ROM address decoder is - shared with other BARs, so leaving it mapped can cause + on the PCI device in the ROM BAR. Note that after the ROM + has been mapped and any necessary information has been extracted, + it should be unmapped; on many devices, the ROM address decoder is + shared with other BARs, so leaving it mapped could cause undesired behavior like hangs or memory corruption. <!--!Fdrivers/pci/rom.c pci_map_rom--> </para> @@ -389,9 +387,9 @@ should support a memory manager. </para> <para> - If your driver supports memory management (it should!), you'll + If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize - it depends on which memory manager you're using, TTM or GEM. + it depends on which memory manager you're using: TTM or GEM. </para> <sect3> <title>TTM initialization</title> @@ -401,7 +399,7 @@ and devices with dedicated video RAM (VRAM), i.e. most discrete graphics devices. If your device has dedicated RAM, supporting TTM is desirable. TTM also integrates tightly with your - driver specific buffer execution function. See the radeon + driver-specific buffer execution function. See the radeon driver for examples. </para> <para> @@ -429,21 +427,21 @@ created by the memory manager at runtime. Your global TTM should have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and - release hooks should point at your driver specific init and - release routines, which will probably eventually call - ttm_mem_global_init and ttm_mem_global_release respectively. + release hooks should point at your driver-specific init and + release routines, which probably eventually call + ttm_mem_global_init and ttm_mem_global_release, respectively. </para> <para> Once your global TTM accounting structure is set up and initialized - (done by calling ttm_global_item_ref on the global object you - just created), you'll need to create a buffer object TTM to + by calling ttm_global_item_ref() on it, + you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions can be provided, - likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also like the previous - object, ttm_global_item_ref is used to create an initial reference + driver-specific init and release functions may be provided, + likely eventually calling ttm_bo_global_init() and + ttm_bo_global_release(), respectively. Also, like the previous + object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. </para> </sect3> @@ -453,27 +451,26 @@ GEM is an alternative to TTM, designed specifically for UMA devices. It has simpler initialization and execution requirements than TTM, but has no VRAM management capability. Core GEM - initialization is comprised of a basic drm_mm_init call to create + is initialized by calling drm_mm_init() to create a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver will - need to allocate and initialize a command ring buffer following - basic GEM initialization. Most UMA devices have a so-called + object allocation. In a KMS configuration, the driver + needs to allocate and initialize a command ring buffer following + core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and must + device. This space is not typically managed by GEM, and it must be initialized separately into its own DRM MM object. </para> <para> - Initialization will be driver specific, and will depend on - the architecture of the device. In the case of Intel + Initialization is driver-specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM will manage + (i.e. it doesn't have dedicated VRAM), GEM manages making regular RAM available for GPU operations. Memory set aside by the BIOS (called "stolen" memory by the i915 - driver) will be managed by the DRM memrange allocator; the - rest of the aperture will be managed by GEM. + driver) is managed by the DRM memrange allocator; the + rest of the aperture is managed by GEM. <programlisting> /* Basic memrange allocator for stolen space (aka vram) */ drm_memrange_init(&dev_priv->vram, 0, prealloc_size); @@ -483,7 +480,7 @@ <!--!Edrivers/char/drm/drm_memrange.c--> </para> <para> - Once the memory manager has been set up, we can allocate the + Once the memory manager has been set up, we may allocate the command buffer. In the i915 case, this is also done with a GEM function, i915_gem_init_ringbuffer(). </para> @@ -493,16 +490,25 @@ <sect2> <title>Output configuration</title> <para> - The final initialization task is output configuration. This involves - finding and initializing the CRTCs, encoders and connectors - for your device, creating an initial configuration and - registering a framebuffer console driver. + The final initialization task is output configuration. This involves: + <itemizedlist> + <listitem> + Finding and initializing the CRTCs, encoders, and connectors + for the device. + </listitem> + <listitem> + Creating an initial configuration. + </listitem> + <listitem> + Registering a framebuffer console driver. + </listitem> + </itemizedlist> </para> <sect3> <title>Output discovery and initialization</title> <para> - Several core functions exist to create CRTCs, encoders and - connectors, namely drm_crtc_init(), drm_connector_init() and + Several core functions exist to create CRTCs, encoders, and + connectors, namely: drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. </para> @@ -555,10 +561,10 @@ void intel_crt_init(struct drm_device *dev) </programlisting> <para> In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device - specific i2c bus is also created, for fetching EDID data and + CRT connector and encoder combination is created. A device-specific + i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, - the new connector is registered with sysfs, to make its + the new connector is registered with sysfs to make its properties available to applications. </para> <sect4> @@ -567,12 +573,12 @@ void intel_crt_init(struct drm_device *dev) Since many PC-class graphics devices have similar display output designs, the DRM provides a set of helper functions to make output management easier. The core helper routines handle - encoder re-routing and disabling of unused functions following - mode set. Using the helpers is optional, but recommended for + encoder re-routing and the disabling of unused functions following + mode setting. Using the helpers is optional, but recommended for devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing - finer grained management can opt to use the core callbacks + finer grained management may opt to use the core callbacks directly. </para> <para> @@ -580,17 +586,25 @@ void intel_crt_init(struct drm_device *dev) </para> </sect4> <para> - For each encoder, CRTC and connector, several functions must - be provided, depending on the object type. Encoder objects - need to provide a DPMS (basically on/off) function, mode fixup - (for converting requested modes into native hardware timings), - and prepare, set and commit functions for use by the core DRM - helper functions. Connector helpers need to provide mode fetch and - validity functions as well as an encoder matching function for - returning an ideal encoder for a given connector. The core - connector functions include a DPMS callback, (deprecated) - save/restore routines, detection, mode probing, property handling, - and cleanup functions. + Each encoder object needs to provide: + <itemizedlist> + <listitem> + A DPMS (basically on/off) function. + </listitem> + <listitem> + A mode-fixup function (for converting requested modes into + native hardware timings). + </listitem> + <listitem> + Functions (prepare, set, and commit) for use by the core DRM + helper functions. + </listitem> + </itemizedlist> + Connector helpers need to provide functions (mode-fetch, validity, + and encoder-matching) for returning an ideal encoder for a given + connector. The core connector functions include a DPMS callback, + save/restore routines (deprecated), detection, mode probing, + property handling, and cleanup functions. </para> <!--!Edrivers/char/drm/drm_crtc.h--> <!--!Edrivers/char/drm/drm_crtc.c--> @@ -605,23 +619,34 @@ void intel_crt_init(struct drm_device *dev) <title>VBlank event handling</title> <para> The DRM core exposes two vertical blank related ioctls: - DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL. + <variablelist> + <varlistentry> + <term>DRM_IOCTL_WAIT_VBLANK</term> + <listitem> + <para> + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term>DRM_IOCTL_MODESET_CTL</term> + <listitem> + <para> + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command, so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + </para> + </listitem> + </varlistentry> + </variablelist> <!--!Edrivers/char/drm/drm_irq.c--> </para> <para> - DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure - as its argument, and is used to block or request a signal when a - specified vblank event occurs. - </para> - <para> - DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices the - vertical blank counter will be reset at that time. Internally, - the DRM snapshots the last vblank count when the ioctl is called - with the _DRM_PRE_MODESET command so that the counter won't go - backwards (which is dealt with when _DRM_POST_MODESET is used). - </para> - <para> To support the functions above, the DRM core provides several helper functions for tracking vertical blank counters, and requires drivers to provide several callbacks: @@ -632,24 +657,24 @@ void intel_crt_init(struct drm_device *dev) register. The enable and disable vblank callbacks should enable and disable vertical blank interrupts, respectively. In the absence of DRM clients waiting on vblank events, the core DRM - code will use the disable_vblank() function to disable - interrupts, which saves power. They'll be re-enabled again when + code uses the disable_vblank() function to disable + interrupts, which saves power. They are re-enabled again when a client calls the vblank wait ioctl above. </para> <para> - Devices that don't provide a count register can simply use an + A device that doesn't provide a count register may simply use an internal atomic counter incremented on every vertical blank - interrupt, and can make their enable and disable vblank - functions into no-ops. + interrupt (and then treat the enable_vblank() and disable_vblank() + callbacks as no-ops). </para> </sect1> <sect1> <title>Memory management</title> <para> - The memory manager lies at the heart of many DRM operations, and - is also required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers, TTM + The memory manager lies at the heart of many DRM operations; it + is required to support advanced client features like OpenGL + pbuffers. The DRM currently contains two memory managers: TTM and GEM. </para> @@ -679,41 +704,46 @@ void intel_crt_init(struct drm_device *dev) <para> GEM-enabled drivers must provide gem_init_object() and gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver - specific ioctls to support command execution, pinning, buffer + allocation routines. They should also provide several driver-specific + ioctls to support command execution, pinning, buffer read & write, mapping, and domain ownership transfers. </para> <para> - On a fundamental level, GEM involves several operations: memory - allocation and freeing, command execution, and aperture management - at command execution time. Buffer object allocation is relatively + On a fundamental level, GEM involves several operations: + <itemizedlist> + <listitem>Memory allocation and freeing</listitem> + <listitem>Command execution</listitem> + <listitem>Aperture management at command execution time</listitem> + </itemizedlist> + Buffer object allocation is relatively straightforward and largely provided by Linux's shmem layer, which provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, when the GPU finishes rendering to an object, - if the CPU accesses it, it must be made coherent with the CPU's view + with the GPU. Likewise, if the CPU accesses an object after the GPU + has finished rendering to the object, then the object must be made + coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by the GEM - set domain function, which evaluates an object's current domain and + This core CPU<->GPU coherency management is provided by a + device-specific ioctl, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case the set domain function - will block the client and wait for rendering to complete before + i.e. an active render target; in that case, setting the domain + blocks the client and waits for rendering to complete before performing any necessary flushing operations). </para> <para> Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM will take care to bind + buffers containing references to previously allocated memory objects, + and then submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding others (a fairly expensive operation), and providing relocation support which hides fixed GTT offsets from clients. Clients must take care not to submit command buffers that reference more objects - than can fit in the GTT or GEM will reject them and no rendering + than can fit in the GTT; otherwise, GEM will reject them and no rendering will occur. Similarly, if several objects in the buffer require fence registers to be allocated for correct rendering (e.g. 2D blits on pre-965 chips), care must be taken not to require more fence @@ -729,7 +759,7 @@ void intel_crt_init(struct drm_device *dev) <title>Output management</title> <para> At the core of the DRM output management code is a set of - structures representing CRTCs, encoders and connectors. + structures representing CRTCs, encoders, and connectors. </para> <para> A CRTC is an abstraction representing a part of the chip that @@ -765,21 +795,19 @@ void intel_crt_init(struct drm_device *dev) <sect1> <title>Framebuffer management</title> <para> - In order to set a mode on a given CRTC, encoder and connector - configuration, clients need to provide a framebuffer object which - will provide a source of pixels for the CRTC to deliver to the encoder(s) - and ultimately the connector(s) in the configuration. A framebuffer - is fundamentally a driver specific memory object, made into an opaque - handle by the DRM addfb function. Once an fb has been created this - way it can be passed to the KMS mode setting routines for use in - a configuration. + Clients need to provide a framebuffer object which provides a source + of pixels for a CRTC to deliver to the encoder(s) and ultimately the + connector(s). A framebuffer is fundamentally a driver-specific memory + object, made into an opaque handle by the DRM's addfb() function. + Once a framebuffer has been created this way, it may be passed to the + KMS mode setting routines for use in a completed configuration. </para> </sect1> <sect1> <title>Command submission & fencing</title> <para> - This should cover a few device specific command submission + This should cover a few device-specific command submission implementations. </para> </sect1> @@ -789,7 +817,7 @@ void intel_crt_init(struct drm_device *dev) <para> The DRM core provides some suspend/resume code, but drivers wanting full suspend/resume support should provide save() and - restore() functions. These will be called at suspend, + restore() functions. These are called at suspend, hibernate, or resume time, and should perform any state save or restore required by your device across suspend or hibernate states. @@ -812,8 +840,8 @@ void intel_crt_init(struct drm_device *dev) <para> The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm - wrapper functions. In addition, drivers export device specific - interfaces for use by userspace drivers & device aware + wrapper functions. In addition, drivers export device-specific + interfaces for use by userspace drivers & device-aware applications through ioctls and sysfs files. </para> <para> @@ -822,8 +850,8 @@ void intel_crt_init(struct drm_device *dev) management, memory management, and output management. </para> <para> - Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages will cover the rest. + Cover generic ioctls and sysfs layout here. We only need high-level + info, since man pages should cover the rest. </para> </chapter> diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index c21d777..7e62de1 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -33,9 +33,9 @@ demonstrate this problem using nested bash shells: From a second, unrelated bash shell: $ kill -SIGSTOP 16690 - $ kill -SIGCONT 16990 + $ kill -SIGCONT 16690 - <at this point 16990 exits and causes 16644 to exit too> + <at this point 16690 exits and causes 16644 to exit too> This happens because bash can observe both signals and choose how it responds to them. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 4f34432..edad99a 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -349,6 +349,7 @@ STAC92HD83* ref Reference board mic-ref Reference board with power management for ports dell-s14 Dell laptop + dell-vostro-3500 Dell Vostro 3500 laptop hp HP laptops with (inverted) mute-LED hp-dv7-4000 HP dv-7 4000 auto BIOS setup (default) diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..3e8bc61 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2342,6 +2342,13 @@ S: Supported F: drivers/gpu/drm/i915 F: include/drm/i915* +DRM DRIVERS FOR EXYNOS +M: Inki Dae <inki.dae@samsung.com> +L: dri-devel@lists.freedesktop.org +S: Supported +F: drivers/gpu/drm/exynos +F: include/drm/exynos* + DSCC4 DRIVER M: Francois Romieu <romieu@fr.zoreil.com> L: netdev@vger.kernel.org @@ -6122,7 +6129,7 @@ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) M: Liam Girdwood <lrg@ti.com> M: Mark Brown <broonie@opensource.wolfsonmicro.com> -T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC S: Supported diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 6260d5d..c7cb0af 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -406,8 +406,10 @@ #define __NR_syncfs 335 #define __NR_sendmmsg 336 #define __NR_setns 337 +#define __NR_process_vm_readv 338 +#define __NR_process_vm_writev 339 -#define NR_syscalls 338 +#define NR_syscalls 340 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 09d8ec4..63402f9 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -84,4 +84,4 @@ sys_call_table: /*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime -/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns +/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index edbec45..db86b1a 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -85,7 +85,7 @@ sys_call_table32: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime - .word sys_syncfs, compat_sys_sendmmsg, sys_setns + .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev #endif /* CONFIG_COMPAT */ @@ -162,4 +162,4 @@ sys_call_table: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime - .word sys_syncfs, sys_sendmmsg, sys_setns + .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index a816f24..a0f768c 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -383,6 +383,7 @@ static int crypto_init_ablkcipher_ops(struct crypto_tfm *tfm, u32 type, return 0; } +#ifdef CONFIG_NET static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_blkcipher rblkcipher; @@ -404,6 +405,12 @@ static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); @@ -457,6 +464,7 @@ static int crypto_init_givcipher_ops(struct crypto_tfm *tfm, u32 type, return 0; } +#ifdef CONFIG_NET static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_blkcipher rblkcipher; @@ -478,6 +486,12 @@ static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); diff --git a/crypto/aead.c b/crypto/aead.c index 701556f..04add3dc 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -111,6 +111,7 @@ static int crypto_init_aead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) return 0; } +#ifdef CONFIG_NET static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_aead raead; @@ -132,6 +133,12 @@ static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); @@ -190,6 +197,7 @@ static int crypto_init_nivaead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) return 0; } +#ifdef CONFIG_NET static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_aead raead; @@ -210,6 +218,12 @@ static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg) diff --git a/crypto/ahash.c b/crypto/ahash.c index a3e6ef9..ac93c99 100644 --- a/crypto/ahash.c +++ b/crypto/ahash.c @@ -399,6 +399,7 @@ static unsigned int crypto_ahash_extsize(struct crypto_alg *alg) return sizeof(struct crypto_shash *); } +#ifdef CONFIG_NET static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_hash rhash; @@ -416,6 +417,12 @@ static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index 2572d26..1e61d1a 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -494,6 +494,7 @@ static int crypto_init_blkcipher_ops(struct crypto_tfm *tfm, u32 type, u32 mask) return crypto_init_blkcipher_ops_async(tfm); } +#ifdef CONFIG_NET static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_blkcipher rblkcipher; @@ -515,6 +516,12 @@ static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c index 2abca78..0605a2b 100644 --- a/crypto/crypto_user.c +++ b/crypto/crypto_user.c @@ -44,9 +44,6 @@ static struct crypto_alg *crypto_alg_match(struct crypto_user_alg *p, int exact) down_read(&crypto_alg_sem); - if (list_empty(&crypto_alg_list)) - return NULL; - list_for_each_entry(q, &crypto_alg_list, cra_list) { int match = 0; diff --git a/crypto/pcompress.c b/crypto/pcompress.c index fefda78..2e458e5 100644 --- a/crypto/pcompress.c +++ b/crypto/pcompress.c @@ -48,6 +48,7 @@ static int crypto_pcomp_init_tfm(struct crypto_tfm *tfm) return 0; } +#ifdef CONFIG_NET static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_comp rpcomp; @@ -62,6 +63,12 @@ static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); diff --git a/crypto/rng.c b/crypto/rng.c index feb7de0..64f864f 100644 --- a/crypto/rng.c +++ b/crypto/rng.c @@ -60,6 +60,7 @@ static int crypto_init_rng_ops(struct crypto_tfm *tfm, u32 type, u32 mask) return 0; } +#ifdef CONFIG_NET static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_rng rrng; @@ -76,6 +77,12 @@ static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_rng_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); diff --git a/crypto/shash.c b/crypto/shash.c index ea8a9c6..9100912 100644 --- a/crypto/shash.c +++ b/crypto/shash.c @@ -524,6 +524,7 @@ static unsigned int crypto_shash_extsize(struct crypto_alg *alg) return alg->cra_ctxsize; } +#ifdef CONFIG_NET static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_hash rhash; @@ -541,6 +542,12 @@ static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg) nla_put_failure: return -EMSGSIZE; } +#else +static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg) +{ + return -ENOSYS; +} +#endif static void crypto_shash_show(struct seq_file *m, struct crypto_alg *alg) __attribute__ ((unused)); diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 434a6c0..95706fa 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -669,7 +669,7 @@ struct srcu_notifier_head *opp_get_notifier(struct device *dev) struct device_opp *dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) - return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */ + return ERR_CAST(dev_opp); /* matching type */ return &dev_opp->head; } diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8..c92424c 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } @@ -1236,7 +1237,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 785127c..1368826 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -9,7 +9,6 @@ menuconfig DRM depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU select I2C select I2C_ALGOBIT - select SLOW_WORK help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select @@ -96,6 +95,7 @@ config DRM_I915 select FB_CFB_IMAGEBLIT # i915 depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select BACKLIGHT_LCD_SUPPORT if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select VIDEO_OUTPUT_CONTROL if ACPI select INPUT if ACPI diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 9a2e2a1..405c63b 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2118,8 +2118,10 @@ struct drm_property *drm_property_create(struct drm_device *dev, int flags, property->num_values = num_values; INIT_LIST_HEAD(&property->enum_blob_list); - if (name) + if (name) { strncpy(property->name, name, DRM_PROP_NAME_LEN); + property->name[DRM_PROP_NAME_LEN-1] = '\0'; + } list_add_tail(&property->head, &dev->mode_config.property_list); return property; diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 2957636..3969f75 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -484,6 +484,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) struct drm_connector *save_connectors, *connector; int count = 0, ro, fail = 0; struct drm_crtc_helper_funcs *crtc_funcs; + struct drm_mode_set save_set; int ret = 0; int i; @@ -556,6 +557,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) save_connectors[count++] = *connector; } + save_set.crtc = set->crtc; + save_set.mode = &set->crtc->mode; + save_set.x = set->crtc->x; + save_set.y = set->crtc->y; + save_set.fb = set->crtc->fb; + /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ if (set->crtc->fb != set->fb) { @@ -721,6 +728,12 @@ fail: *connector = save_connectors[count++]; } + /* Try to restore the config */ + if (mode_changed && + !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x, + save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + kfree(save_connectors); kfree(save_encoders); kfree(save_crtcs); diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c index d067c12..1c7a1c0 100644 --- a/drivers/gpu/drm/drm_debugfs.c +++ b/drivers/gpu/drm/drm_debugfs.c @@ -118,7 +118,10 @@ int drm_debugfs_create_files(struct drm_info_list *files, int count, tmp->minor = minor; tmp->dent = ent; tmp->info_ent = &files[i]; - list_add(&(tmp->list), &(minor->debugfs_nodes.list)); + + mutex_lock(&minor->debugfs_lock); + list_add(&tmp->list, &minor->debugfs_list); + mutex_unlock(&minor->debugfs_lock); } return 0; @@ -146,7 +149,8 @@ int drm_debugfs_init(struct drm_minor *minor, int minor_id, char name[64]; int ret; - INIT_LIST_HEAD(&minor->debugfs_nodes.list); + INIT_LIST_HEAD(&minor->debugfs_list); + mutex_init(&minor->debugfs_lock); sprintf(name, "%d", minor_id); minor->debugfs_root = debugfs_create_dir(name, root); if (!minor->debugfs_root) { @@ -192,8 +196,9 @@ int drm_debugfs_remove_files(struct drm_info_list *files, int count, struct drm_info_node *tmp; int i; + mutex_lock(&minor->debugfs_lock); for (i = 0; i < count; i++) { - list_for_each_safe(pos, q, &minor->debugfs_nodes.list) { + list_for_each_safe(pos, q, &minor->debugfs_list) { tmp = list_entry(pos, struct drm_info_node, list); if (tmp->info_ent == &files[i]) { debugfs_remove(tmp->dent); @@ -202,6 +207,7 @@ int drm_debugfs_remove_files(struct drm_info_list *files, int count, } } } + mutex_unlock(&minor->debugfs_lock); return 0; } EXPORT_SYMBOL(drm_debugfs_remove_files); diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index fc81af9..40c187c 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -125,7 +125,7 @@ static struct drm_ioctl_desc drm_ioctls[] = { DRM_IOCTL_DEF(DRM_IOCTL_SG_ALLOC, drm_sg_alloc_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_IOCTL_SG_FREE, drm_sg_free, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), - DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, 0), + DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_MODESET_CTL, drm_modeset_ctl, 0), diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index cb3794a..68b7562 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -407,13 +407,16 @@ int drm_irq_uninstall(struct drm_device *dev) /* * Wake up any waiters so they don't hang. */ - spin_lock_irqsave(&dev->vbl_lock, irqflags); - for (i = 0; i < dev->num_crtcs; i++) { - DRM_WAKEUP(&dev->vbl_queue[i]); - dev->vblank_enabled[i] = 0; - dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i); + if (dev->num_crtcs) { + spin_lock_irqsave(&dev->vbl_lock, irqflags); + for (i = 0; i < dev->num_crtcs; i++) { + DRM_WAKEUP(&dev->vbl_queue[i]); + dev->vblank_enabled[i] = 0; + dev->last_vblank[i] = + dev->driver->get_vblank_counter(dev, i); + } + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); } - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); if (!irq_enabled) return -EINVAL; @@ -1125,6 +1128,7 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, trace_drm_vblank_event_delivered(current->pid, pipe, vblwait->request.sequence); } else { + /* drm_handle_vblank_events will call drm_vblank_put */ list_add_tail(&e->base.link, &dev->vblank_event_list); vblwait->reply.sequence = vblwait->request.sequence; } @@ -1205,8 +1209,12 @@ int drm_wait_vblank(struct drm_device *dev, void *data, goto done; } - if (flags & _DRM_VBLANK_EVENT) + if (flags & _DRM_VBLANK_EVENT) { + /* must hold on to the vblank ref until the event fires + * drm_vblank_put will be called asynchronously + */ return drm_queue_vblank_event(dev, crtc, vblwait, file_priv); + } if ((flags & _DRM_VBLANK_NEXTONMISS) && (seq - vblwait->request.sequence) <= (1<<23)) { diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index d14b44e..4f40f1c 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1506,7 +1506,10 @@ drm_add_fake_info_node(struct drm_minor *minor, node->minor = minor; node->dent = ent; node->info_ent = (void *) key; - list_add(&node->list, &minor->debugfs_nodes.list); + + mutex_lock(&minor->debugfs_lock); + list_add(&node->list, &minor->debugfs_list); + mutex_unlock(&minor->debugfs_lock); return 0; } diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index cc531bb..e9c2cfe 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -789,8 +789,8 @@ static struct vm_operations_struct i915_gem_vm_ops = { }; static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36..d18b07a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 032a820..5fc201b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -640,10 +640,9 @@ static int nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk) { struct drm_nouveau_private *dev_priv = dev->dev_private; - uint32_t reg0 = nv_rd32(dev, reg + 0); - uint32_t reg1 = nv_rd32(dev, reg + 4); struct nouveau_pll_vals pll; struct pll_lims pll_limits; + u32 ctrl, mask, coef; int ret; ret = get_pll_limits(dev, reg, &pll_limits); @@ -654,15 +653,20 @@ nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk) if (!clk) return -ERANGE; - reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16); - reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1; - - if (dev_priv->vbios.execute) { - still_alive(); - nv_wr32(dev, reg + 4, reg1); - nv_wr32(dev, reg + 0, reg0); + coef = pll.N1 << 8 | pll.M1; + ctrl = pll.log2P << 16; + mask = 0x00070000; + if (reg == 0x004008) { + mask |= 0x01f80000; + ctrl |= (pll_limits.log2p_bias << 19); + ctrl |= (pll.log2P << 22); } + if (!dev_priv->vbios.execute) + return 0; + + nv_mask(dev, reg + 0, mask, ctrl); + nv_wr32(dev, reg + 4, coef); return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 7226f41..7cc37e6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -148,7 +148,7 @@ set_placement_range(struct nouveau_bo *nvbo, uint32_t type) if (dev_priv->card_type == NV_10 && nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) && - nvbo->bo.mem.num_pages < vram_pages / 2) { + nvbo->bo.mem.num_pages < vram_pages / 4) { /* * Make sure that the color and depth buffers are handled * by independent memory controller units. Up to a 9x diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index a319d564..bb6ec9e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -158,6 +158,7 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, INIT_LIST_HEAD(&chan->nvsw.vbl_wait); INIT_LIST_HEAD(&chan->nvsw.flip); INIT_LIST_HEAD(&chan->fence.pending); + spin_lock_init(&chan->fence.lock); /* setup channel's memory and vm */ ret = nouveau_gpuobj_channel_init(chan, vram_handle, gart_handle); diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index e0d275e..cea6696 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -710,7 +710,7 @@ nouveau_connector_mode_valid(struct drm_connector *connector, case OUTPUT_DP: max_clock = nv_encoder->dp.link_nr; max_clock *= nv_encoder->dp.link_bw; - clock = clock * nouveau_connector_bpp(connector) / 8; + clock = clock * nouveau_connector_bpp(connector) / 10; break; default: BUG_ON(1); diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 14a8627..3a4cc32 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -487,6 +487,7 @@ int nouveau_fbcon_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_fbdev *nfbdev; + int preferred_bpp; int ret; nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL); @@ -505,7 +506,15 @@ int nouveau_fbcon_init(struct drm_device *dev) } drm_fb_helper_single_add_all_connectors(&nfbdev->helper); - drm_fb_helper_initial_config(&nfbdev->helper, 32); + + if (dev_priv->vram_size <= 32 * 1024 * 1024) + preferred_bpp = 8; + else if (dev_priv->vram_size <= 64 * 1024 * 1024) + preferred_bpp = 16; + else + preferred_bpp = 32; + + drm_fb_helper_initial_config(&nfbdev->helper, preferred_bpp); return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index 81116cf..2f6daae 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -539,8 +539,6 @@ nouveau_fence_channel_init(struct nouveau_channel *chan) return ret; } - INIT_LIST_HEAD(&chan->fence.pending); - spin_lock_init(&chan->fence.lock); atomic_set(&chan->fence.last_sequence_irq, 0); return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c index c6143df..d39b220 100644 --- a/drivers/gpu/drm/nouveau/nouveau_i2c.c +++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c @@ -333,7 +333,7 @@ nouveau_i2c_identify(struct drm_device *dev, const char *what, NV_DEBUG(dev, "Probing %ss on I2C bus: %d\n", what, index); - for (i = 0; info[i].addr; i++) { + for (i = 0; i2c && info[i].addr; i++) { if (nouveau_probe_i2c_addr(i2c, info[i].addr) && (!match || match(i2c, &info[i]))) { NV_INFO(dev, "Detected %s: %s\n", what, info[i].type); diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c index 9f178aa..33d03fb 100644 --- a/drivers/gpu/drm/nouveau/nouveau_perf.c +++ b/drivers/gpu/drm/nouveau/nouveau_perf.c @@ -239,7 +239,7 @@ nouveau_perf_init(struct drm_device *dev) if(version == 0x15) { memtimings->timing = kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL); - if(!memtimings) { + if (!memtimings->timing) { NV_WARN(dev,"Could not allocate memtiming table\n"); return; } diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 82478e0..d8831ab 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -579,6 +579,14 @@ nouveau_card_init(struct drm_device *dev) if (ret) goto out_display_early; + /* workaround an odd issue on nvc1 by disabling the device's + * nosnoop capability. hopefully won't cause issues until a + * better fix is found - assuming there is one... + */ + if (dev_priv->chipset == 0xc1) { + nv_mask(dev, 0x00088080, 0x00000800, 0x00000000); + } + nouveau_pm_init(dev); ret = engine->vram.init(dev); @@ -1102,12 +1110,13 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) dev_priv->noaccel = !!nouveau_noaccel; if (nouveau_noaccel == -1) { switch (dev_priv->chipset) { - case 0xc1: /* known broken */ - case 0xc8: /* never tested */ +#if 0 + case 0xXX: /* known broken */ NV_INFO(dev, "acceleration disabled by default, pass " "noaccel=0 to force enable\n"); dev_priv->noaccel = true; break; +#endif default: dev_priv->noaccel = false; break; diff --git a/drivers/gpu/drm/nouveau/nv40_pm.c b/drivers/gpu/drm/nouveau/nv40_pm.c index bbc0b9c..e676b0d 100644 --- a/drivers/gpu/drm/nouveau/nv40_pm.c +++ b/drivers/gpu/drm/nouveau/nv40_pm.c @@ -57,12 +57,14 @@ read_pll_2(struct drm_device *dev, u32 reg) int P = (ctrl & 0x00070000) >> 16; u32 ref = 27000, clk = 0; - if (ctrl & 0x80000000) + if ((ctrl & 0x80000000) && M1) { clk = ref * N1 / M1; - - if (!(ctrl & 0x00000100)) { - if (ctrl & 0x40000000) - clk = clk * N2 / M2; + if ((ctrl & 0x40000100) == 0x40000000) { + if (M2) + clk = clk * N2 / M2; + else + clk = 0; + } } return clk >> P; @@ -177,6 +179,11 @@ nv40_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) } /* memory clock */ + if (!perflvl->memory) { + info->mpll_ctrl = 0x00000000; + goto out; + } + ret = nv40_calc_pll(dev, 0x004020, &pll, perflvl->memory, &N1, &M1, &N2, &M2, &log2P); if (ret < 0) @@ -264,6 +271,9 @@ nv40_pm_clocks_set(struct drm_device *dev, void *pre_state) mdelay(5); nv_mask(dev, 0x00c040, 0x00000333, info->ctrl); + if (!info->mpll_ctrl) + goto resume; + /* wait for vblank start on active crtcs, disable memory access */ for (i = 0; i < 2; i++) { if (!(crtc_mask & (1 << i))) diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 8c979b3..ac601f7 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -131,8 +131,8 @@ nv50_graph_init(struct drm_device *dev, int engine) NV_DEBUG(dev, "\n"); /* master reset */ - nv_mask(dev, 0x000200, 0x00200100, 0x00000000); - nv_mask(dev, 0x000200, 0x00200100, 0x00200100); + nv_mask(dev, 0x000200, 0x00201000, 0x00000000); + nv_mask(dev, 0x000200, 0x00201000, 0x00201000); nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */ /* reset/enable traps and interrupts */ diff --git a/drivers/gpu/drm/nouveau/nv50_grctx.c b/drivers/gpu/drm/nouveau/nv50_grctx.c index d05c2c3..4b46d69 100644 --- a/drivers/gpu/drm/nouveau/nv50_grctx.c +++ b/drivers/gpu/drm/nouveau/nv50_grctx.c @@ -601,7 +601,7 @@ nv50_graph_construct_mmio(struct nouveau_grctx *ctx) gr_def(ctx, offset + 0x1c, 0x00880000); break; case 0x86: - gr_def(ctx, offset + 0x1c, 0x008c0000); + gr_def(ctx, offset + 0x1c, 0x018c0000); break; case 0x92: case 0x96: diff --git a/drivers/gpu/drm/nouveau/nv50_vram.c b/drivers/gpu/drm/nouveau/nv50_vram.c index 9da2383..2e45e57 100644 --- a/drivers/gpu/drm/nouveau/nv50_vram.c +++ b/drivers/gpu/drm/nouveau/nv50_vram.c @@ -160,7 +160,7 @@ nv50_vram_rblock(struct drm_device *dev) colbits = (r4 & 0x0000f000) >> 12; rowbitsa = ((r4 & 0x000f0000) >> 16) + 8; rowbitsb = ((r4 & 0x00f00000) >> 20) + 8; - banks = ((r4 & 0x01000000) ? 8 : 4); + banks = 1 << (((r4 & 0x03000000) >> 24) + 2); rowsize = parts * banks * (1 << colbits) * 8; predicted = rowsize << rowbitsa; diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index bbdbc51..a74e501 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -157,8 +157,8 @@ nvc0_graph_create_context_mmio_list(struct nouveau_channel *chan) struct nvc0_graph_priv *priv = nv_engine(chan->dev, NVOBJ_ENGINE_GR); struct nvc0_graph_chan *grch = chan->engctx[NVOBJ_ENGINE_GR]; struct drm_device *dev = chan->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; int i = 0, gpc, tp, ret; - u32 magic; ret = nouveau_gpuobj_new(dev, chan, 0x2000, 256, NVOBJ_FLAG_VM, &grch->unk408004); @@ -207,14 +207,37 @@ nvc0_graph_create_context_mmio_list(struct nouveau_channel *chan) nv_wo32(grch->mmio, i++ * 4, 0x0041880c); nv_wo32(grch->mmio, i++ * 4, 0x80000018); - magic = 0x02180000; - nv_wo32(grch->mmio, i++ * 4, 0x00405830); - nv_wo32(grch->mmio, i++ * 4, magic); - for (gpc = 0; gpc < priv->gpc_nr; gpc++) { - for (tp = 0; tp < priv->tp_nr[gpc]; tp++, magic += 0x0324) { - u32 reg = 0x504520 + (gpc * 0x8000) + (tp * 0x0800); - nv_wo32(grch->mmio, i++ * 4, reg); - nv_wo32(grch->mmio, i++ * 4, magic); + if (dev_priv->chipset != 0xc1) { + u32 magic = 0x02180000; + nv_wo32(grch->mmio, i++ * 4, 0x00405830); + nv_wo32(grch->mmio, i++ * 4, magic); + for (gpc = 0; gpc < priv->gpc_nr; gpc++) { + for (tp = 0; tp < priv->tp_nr[gpc]; tp++) { + u32 reg = TP_UNIT(gpc, tp, 0x520); + nv_wo32(grch->mmio, i++ * 4, reg); + nv_wo32(grch->mmio, i++ * 4, magic); + magic += 0x0324; + } + } + } else { + u32 magic = 0x02180000; + nv_wo32(grch->mmio, i++ * 4, 0x00405830); + nv_wo32(grch->mmio, i++ * 4, magic | 0x0000218); + nv_wo32(grch->mmio, i++ * 4, 0x004064c4); + nv_wo32(grch->mmio, i++ * 4, 0x0086ffff); + for (gpc = 0; gpc < priv->gpc_nr; gpc++) { + for (tp = 0; tp < priv->tp_nr[gpc]; tp++) { + u32 reg = TP_UNIT(gpc, tp, 0x520); + nv_wo32(grch->mmio, i++ * 4, reg); + nv_wo32(grch->mmio, i++ * 4, (1 << 28) | magic); + magic += 0x0324; + } + for (tp = 0; tp < priv->tp_nr[gpc]; tp++) { + u32 reg = TP_UNIT(gpc, tp, 0x544); + nv_wo32(grch->mmio, i++ * 4, reg); + nv_wo32(grch->mmio, i++ * 4, magic); + magic += 0x0324; + } } } diff --git a/drivers/gpu/drm/nouveau/nvc0_grctx.c b/drivers/gpu/drm/nouveau/nvc0_grctx.c index dd0e6a7..96b0b93 100644 --- a/drivers/gpu/drm/nouveau/nvc0_grctx.c +++ b/drivers/gpu/drm/nouveau/nvc0_grctx.c @@ -1812,6 +1812,7 @@ nvc0_grctx_generate(struct nouveau_channel *chan) /* calculate first set of magics */ memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr)); + gpc = -1; for (tp = 0; tp < priv->tp_total; tp++) { do { gpc = (gpc + 1) % priv->gpc_nr; @@ -1861,30 +1862,26 @@ nvc0_grctx_generate(struct nouveau_channel *chan) if (1) { u32 tp_mask = 0, tp_set = 0; - u8 tpnr[GPC_MAX]; + u8 tpnr[GPC_MAX], a, b; memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr)); for (gpc = 0; gpc < priv->gpc_nr; gpc++) tp_mask |= ((1 << priv->tp_nr[gpc]) - 1) << (gpc * 8); - gpc = -1; - for (i = 0, gpc = -1; i < 32; i++) { - int ltp = i * (priv->tp_total - 1) / 32; - - do { - gpc = (gpc + 1) % priv->gpc_nr; - } while (!tpnr[gpc]); - tp = priv->tp_nr[gpc] - tpnr[gpc]--; + for (i = 0, gpc = -1, b = -1; i < 32; i++) { + a = (i * (priv->tp_total - 1)) / 32; + if (a != b) { + b = a; + do { + gpc = (gpc + 1) % priv->gpc_nr; + } while (!tpnr[gpc]); + tp = priv->tp_nr[gpc] - tpnr[gpc]--; - tp_set |= 1 << ((gpc * 8) + tp); + tp_set |= 1 << ((gpc * 8) + tp); + } - do { - nv_wr32(dev, 0x406800 + (i * 0x20), tp_set); - tp_set ^= tp_mask; - nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set); - tp_set ^= tp_mask; - } while (ltp == (++i * (priv->tp_total - 1) / 32)); - i--; + nv_wr32(dev, 0x406800 + (i * 0x20), tp_set); + nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set ^ tp_mask); } } diff --git a/drivers/gpu/drm/nouveau/nvc0_vram.c b/drivers/gpu/drm/nouveau/nvc0_vram.c index edbfe93..ce984d5 100644 --- a/drivers/gpu/drm/nouveau/nvc0_vram.c +++ b/drivers/gpu/drm/nouveau/nvc0_vram.c @@ -43,7 +43,7 @@ static const u8 types[256] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, - 3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, + 3, 3, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0, 3, 3, 3, 3, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 1, 1, 0 @@ -110,22 +110,26 @@ nvc0_vram_init(struct drm_device *dev) u32 bsize = nv_rd32(dev, 0x10f20c); u32 offset, length; bool uniform = true; - int ret, i; + int ret, part; NV_DEBUG(dev, "0x100800: 0x%08x\n", nv_rd32(dev, 0x100800)); NV_DEBUG(dev, "parts 0x%08x bcast_mem_amount 0x%08x\n", parts, bsize); /* read amount of vram attached to each memory controller */ - for (i = 0; i < parts; i++) { - u32 psize = nv_rd32(dev, 0x11020c + (i * 0x1000)); + part = 0; + while (parts) { + u32 psize = nv_rd32(dev, 0x11020c + (part++ * 0x1000)); + if (psize == 0) + continue; + parts--; + if (psize != bsize) { if (psize < bsize) bsize = psize; uniform = false; } - NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", i, psize); - + NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", part, psize); dev_priv->vram_size += (u64)psize << 20; } diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 87921c8..87631fe 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1522,12 +1522,6 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; - - /* adjust pm to upcoming mode change */ - radeon_pm_compute_clocks(rdev); - if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode)) return false; return true; diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index a0de485..6fb335a 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -283,7 +283,7 @@ int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, } } - DRM_ERROR("aux i2c too many retries, giving up\n"); + DRM_DEBUG_KMS("aux i2c too many retries, giving up\n"); return -EREMOTEIO; } diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e4c384b..1d603a3 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -157,6 +157,57 @@ int sumo_get_temp(struct radeon_device *rdev) return actual_temp * 1000; } +void sumo_pm_init_profile(struct radeon_device *rdev) +{ + int idx; + + /* default */ + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index; + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index; + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0; + + /* low,mid sh/mh */ + if (rdev->flags & RADEON_IS_MOBILITY) + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + else + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; + + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; + + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0; + + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0; + + /* high sh/mh */ + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = + rdev->pm.power_state[idx].num_clock_modes - 1; + + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = + rdev->pm.power_state[idx].num_clock_modes - 1; +} + void evergreen_pm_misc(struct radeon_device *rdev) { int req_ps_idx = rdev->pm.requested_power_state_index; @@ -1219,7 +1270,7 @@ void evergreen_mc_program(struct radeon_device *rdev) WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.vram_end >> 12); } - WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0); + WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12); if (rdev->flags & RADEON_IS_IGP) { tmp = RREG32(MC_FUS_VM_FB_OFFSET) & 0x000FFFFF; tmp |= ((rdev->mc.vram_end >> 20) & 0xF) << 24; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 19afc43..9cdda0b 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -288,24 +288,6 @@ void r600_pm_get_dynpm_state(struct radeon_device *rdev) pcie_lanes); } -static int r600_pm_get_type_index(struct radeon_device *rdev, - enum radeon_pm_state_type ps_type, - int instance) -{ - int i; - int found_instance = -1; - - for (i = 0; i < rdev->pm.num_power_states; i++) { - if (rdev->pm.power_state[i].type == ps_type) { - found_instance++; - if (found_instance == instance) - return i; - } - } - /* return default if no match */ - return rdev->pm.default_power_state_index; -} - void rs780_pm_init_profile(struct radeon_device *rdev) { if (rdev->pm.num_power_states == 2) { @@ -421,6 +403,8 @@ void rs780_pm_init_profile(struct radeon_device *rdev) void r600_pm_init_profile(struct radeon_device *rdev) { + int idx; + if (rdev->family == CHIP_R600) { /* XXX */ /* default */ @@ -502,81 +486,43 @@ void r600_pm_init_profile(struct radeon_device *rdev) rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 2; /* low sh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; - } else { - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; - } + if (rdev->flags & RADEON_IS_MOBILITY) + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + else + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; /* mid sh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; - } else { - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; - } + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; /* high sh */ - rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx; rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2; /* low mh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; - } else { - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; - } + if (rdev->flags & RADEON_IS_MOBILITY) + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); + else + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; /* mid mh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; - } else { - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; - } + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; /* high mh */ - rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx; rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b316b30..fc5a1d6 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -784,8 +784,7 @@ struct radeon_pm_clock_info { struct radeon_power_state { enum radeon_pm_state_type type; - /* XXX: use a define for num clock modes */ - struct radeon_pm_clock_info clock_info[8]; + struct radeon_pm_clock_info *clock_info; /* number of valid clock modes in this power state */ int num_clock_modes; struct radeon_pm_clock_info *default_clock_mode; @@ -855,6 +854,9 @@ struct radeon_pm { struct device *int_hwmon_dev; }; +int radeon_pm_get_type_index(struct radeon_device *rdev, + enum radeon_pm_state_type ps_type, + int instance); /* * Benchmarking @@ -1142,6 +1144,48 @@ struct r600_vram_scratch { u64 gpu_addr; }; + +/* + * Mutex which allows recursive locking from the same process. + */ +struct radeon_mutex { + struct mutex mutex; + struct task_struct *owner; + int level; +}; + +static inline void radeon_mutex_init(struct radeon_mutex *mutex) +{ + mutex_init(&mutex->mutex); + mutex->owner = NULL; + mutex->level = 0; +} + +static inline void radeon_mutex_lock(struct radeon_mutex *mutex) +{ + if (mutex_trylock(&mutex->mutex)) { + /* The mutex was unlocked before, so it's ours now */ + mutex->owner = current; + } else if (mutex->owner != current) { + /* Another process locked the mutex, take it */ + mutex_lock(&mutex->mutex); + mutex->owner = current; + } + /* Otherwise the mutex was already locked by this process */ + + mutex->level++; +} + +static inline void radeon_mutex_unlock(struct radeon_mutex *mutex) +{ + if (--mutex->level > 0) + return; + + mutex->owner = NULL; + mutex_unlock(&mutex->mutex); +} + + /* * Core structure, functions and helpers. */ @@ -1197,7 +1241,7 @@ struct radeon_device { struct radeon_gem gem; struct radeon_pm pm; uint32_t bios_scratch[RADEON_BIOS_NUM_SCRATCH]; - struct mutex cs_mutex; + struct radeon_mutex cs_mutex; struct radeon_wb wb; struct radeon_dummy_page dummy_page; bool gpu_lockup; diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index e294456..a2e1eae 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -834,7 +834,7 @@ static struct radeon_asic sumo_asic = { .pm_misc = &evergreen_pm_misc, .pm_prepare = &evergreen_pm_prepare, .pm_finish = &evergreen_pm_finish, - .pm_init_profile = &rs780_pm_init_profile, + .pm_init_profile = &sumo_pm_init_profile, .pm_get_dynpm_state = &r600_pm_get_dynpm_state, .pre_page_flip = &evergreen_pre_page_flip, .page_flip = &evergreen_page_flip, diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 85f14f0..5991484 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -413,6 +413,7 @@ extern int evergreen_cs_parse(struct radeon_cs_parser *p); extern void evergreen_pm_misc(struct radeon_device *rdev); extern void evergreen_pm_prepare(struct radeon_device *rdev); extern void evergreen_pm_finish(struct radeon_device *rdev); +extern void sumo_pm_init_profile(struct radeon_device *rdev); extern void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc); extern u32 evergreen_page_flip(struct radeon_device *rdev, int crtc, u64 crtc_base); extern void evergreen_post_page_flip(struct radeon_device *rdev, int crtc); diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 08d0b94..d2d1792 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1999,6 +1999,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; switch (frev) { case 1: + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock); @@ -2035,6 +2039,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 2: + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock); @@ -2072,6 +2080,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 3: + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock); @@ -2257,7 +2269,7 @@ static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rde rdev->pm.default_power_state_index = state_index; rdev->pm.power_state[state_index].default_clock_mode = &rdev->pm.power_state[state_index].clock_info[mode_index - 1]; - if (ASIC_IS_DCE5(rdev)) { + if (ASIC_IS_DCE5(rdev) && !(rdev->flags & RADEON_IS_IGP)) { /* NI chips post without MC ucode, so default clocks are strobe mode only */ rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk; rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk; @@ -2377,17 +2389,31 @@ static int radeon_atombios_parse_power_table_4_5(struct radeon_device *rdev) le16_to_cpu(power_info->pplib.usNonClockInfoArrayOffset) + (power_state->v1.ucNonClockStateIndex * power_info->pplib.ucNonClockSize)); - for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) { - clock_info = (union pplib_clock_info *) - (mode_info->atom_context->bios + data_offset + - le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) + - (power_state->v1.ucClockStateIndices[j] * - power_info->pplib.ucClockInfoSize)); - valid = radeon_atombios_parse_pplib_clock_info(rdev, - state_index, mode_index, - clock_info); - if (valid) - mode_index++; + rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) * + ((power_info->pplib.ucStateEntrySize - 1) ? + (power_info->pplib.ucStateEntrySize - 1) : 1), + GFP_KERNEL); + if (!rdev->pm.power_state[i].clock_info) + return state_index; + if (power_info->pplib.ucStateEntrySize - 1) { + for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) { + clock_info = (union pplib_clock_info *) + (mode_info->atom_context->bios + data_offset + + le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) + + (power_state->v1.ucClockStateIndices[j] * + power_info->pplib.ucClockInfoSize)); + valid = radeon_atombios_parse_pplib_clock_info(rdev, + state_index, mode_index, + clock_info); + if (valid) + mode_index++; + } + } else { + rdev->pm.power_state[state_index].clock_info[0].mclk = + rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[0].sclk = + rdev->clock.default_sclk; + mode_index++; } rdev->pm.power_state[state_index].num_clock_modes = mode_index; if (mode_index) { @@ -2456,18 +2482,32 @@ static int radeon_atombios_parse_power_table_6(struct radeon_device *rdev) non_clock_array_index = i; /* power_state->v2.nonClockInfoIndex */ non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *) &non_clock_info_array->nonClockInfo[non_clock_array_index]; - for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) { - clock_array_index = power_state->v2.clockInfoIndex[j]; - /* XXX this might be an inagua bug... */ - if (clock_array_index >= clock_info_array->ucNumEntries) - continue; - clock_info = (union pplib_clock_info *) - &clock_info_array->clockInfo[clock_array_index]; - valid = radeon_atombios_parse_pplib_clock_info(rdev, - state_index, mode_index, - clock_info); - if (valid) - mode_index++; + rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) * + (power_state->v2.ucNumDPMLevels ? + power_state->v2.ucNumDPMLevels : 1), + GFP_KERNEL); + if (!rdev->pm.power_state[i].clock_info) + return state_index; + if (power_state->v2.ucNumDPMLevels) { + for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) { + clock_array_index = power_state->v2.clockInfoIndex[j]; + /* XXX this might be an inagua bug... */ + if (clock_array_index >= clock_info_array->ucNumEntries) + continue; + clock_info = (union pplib_clock_info *) + &clock_info_array->clockInfo[clock_array_index]; + valid = radeon_atombios_parse_pplib_clock_info(rdev, + state_index, mode_index, + clock_info); + if (valid) + mode_index++; + } + } else { + rdev->pm.power_state[state_index].clock_info[0].mclk = + rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[0].sclk = + rdev->clock.default_sclk; + mode_index++; } rdev->pm.power_state[state_index].num_clock_modes = mode_index; if (mode_index) { @@ -2524,19 +2564,23 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev) } else { rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL); if (rdev->pm.power_state) { - /* add the default mode */ - rdev->pm.power_state[state_index].type = - POWER_STATE_TYPE_DEFAULT; - rdev->pm.power_state[state_index].num_clock_modes = 1; - rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk; - rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk; - rdev->pm.power_state[state_index].default_clock_mode = - &rdev->pm.power_state[state_index].clock_info[0]; - rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; - rdev->pm.power_state[state_index].pcie_lanes = 16; - rdev->pm.default_power_state_index = state_index; - rdev->pm.power_state[state_index].flags = 0; - state_index++; + rdev->pm.power_state[0].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (rdev->pm.power_state[0].clock_info) { + /* add the default mode */ + rdev->pm.power_state[state_index].type = + POWER_STATE_TYPE_DEFAULT; + rdev->pm.power_state[state_index].num_clock_modes = 1; + rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk; + rdev->pm.power_state[state_index].default_clock_mode = + &rdev->pm.power_state[state_index].clock_info[0]; + rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; + rdev->pm.power_state[state_index].pcie_lanes = 16; + rdev->pm.default_power_state_index = state_index; + rdev->pm.power_state[state_index].flags = 0; + state_index++; + } } } diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 5cafc90..17e1a9b 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -98,7 +98,7 @@ static void radeon_benchmark_move(struct radeon_device *rdev, unsigned size, struct radeon_bo *sobj = NULL; uint64_t saddr, daddr; int r, n; - unsigned int time; + int time; n = RADEON_BENCHMARK_ITERATIONS; r = radeon_bo_create(rdev, size, PAGE_SIZE, true, sdomain, &sobj); diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index fae00c0..ccaa243 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -222,7 +222,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) struct radeon_cs_chunk *ib_chunk; int r; - mutex_lock(&rdev->cs_mutex); + radeon_mutex_lock(&rdev->cs_mutex); /* initialize parser */ memset(&parser, 0, sizeof(struct radeon_cs_parser)); parser.filp = filp; @@ -233,14 +233,14 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) if (r) { DRM_ERROR("Failed to initialize parser !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_ib_get(rdev, &parser.ib); if (r) { DRM_ERROR("Failed to get ib !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_cs_parser_relocs(&parser); @@ -248,7 +248,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) if (r != -ERESTARTSYS) DRM_ERROR("Failed to parse relocation %d!\n", r); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } /* Copy the packet into the IB, the parser will read from the @@ -260,14 +260,14 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) if (r || parser.parser_error) { DRM_ERROR("Invalid command stream !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_cs_finish_pages(&parser); if (r) { DRM_ERROR("Invalid command stream !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_ib_schedule(rdev, parser.ib); @@ -275,7 +275,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) DRM_ERROR("Failed to schedule IB !\n"); } radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index c33bc91..c4d00a1 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -716,7 +716,7 @@ int radeon_device_init(struct radeon_device *rdev, /* mutex initialization are all done here so we * can recall function without having locking issues */ - mutex_init(&rdev->cs_mutex); + radeon_mutex_init(&rdev->cs_mutex); mutex_init(&rdev->ib_pool.mutex); mutex_init(&rdev->cp.mutex); mutex_init(&rdev->dc_hw_i2c_mutex); @@ -955,6 +955,9 @@ int radeon_gpu_reset(struct radeon_device *rdev) int r; int resched; + /* Prevent CS ioctl from interfering */ + radeon_mutex_lock(&rdev->cs_mutex); + radeon_save_bios_scratch_regs(rdev); /* block TTM */ resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev); @@ -967,10 +970,15 @@ int radeon_gpu_reset(struct radeon_device *rdev) radeon_restore_bios_scratch_regs(rdev); drm_helper_resume_force_mode(rdev->ddev); ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched); - return 0; } - /* bad news, how to tell it to userspace ? */ - dev_info(rdev->dev, "GPU reset failed\n"); + + radeon_mutex_unlock(&rdev->cs_mutex); + + if (r) { + /* bad news, how to tell it to userspace ? */ + dev_info(rdev->dev, "GPU reset failed\n"); + } + return r; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 41a5d48..daadf21 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -991,12 +991,6 @@ static bool radeon_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; - - /* adjust pm to upcoming mode change */ - radeon_pm_compute_clocks(rdev); - if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode)) return false; return true; diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 6fabe89..78a665b 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -53,6 +53,24 @@ static void radeon_pm_set_clocks(struct radeon_device *rdev); #define ACPI_AC_CLASS "ac_adapter" +int radeon_pm_get_type_index(struct radeon_device *rdev, + enum radeon_pm_state_type ps_type, + int instance) +{ + int i; + int found_instance = -1; + + for (i = 0; i < rdev->pm.num_power_states; i++) { + if (rdev->pm.power_state[i].type == ps_type) { + found_instance++; + if (found_instance == instance) + return i; + } + } + /* return default if no match */ + return rdev->pm.default_power_state_index; +} + #ifdef CONFIG_ACPI static int radeon_acpi_event(struct notifier_block *nb, unsigned long val, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 03daefa..880e285 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -105,6 +105,10 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, struct vmw_dma_buffer *dmabuf = NULL; int ret; + /* A lot of the code assumes this */ + if (handle && (width != 64 || height != 64)) + return -EINVAL; + if (handle) { ret = vmw_user_surface_lookup_handle(dev_priv, tfile, handle, &surface); @@ -410,8 +414,9 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, top = clips->y1; bottom = clips->y2; - clips_ptr = clips; - for (i = 1; i < num_clips; i++, clips_ptr += inc) { + /* skip the first clip rect */ + for (i = 1, clips_ptr = clips + inc; + i < num_clips; i++, clips_ptr += inc) { left = min_t(int, left, (int)clips_ptr->x1); right = max_t(int, right, (int)clips_ptr->x2); top = min_t(int, top, (int)clips_ptr->y1); @@ -1323,7 +1328,10 @@ int vmw_kms_close(struct vmw_private *dev_priv) * drm_encoder_cleanup which takes the lock we deadlock. */ drm_mode_config_cleanup(dev_priv->dev); - vmw_kms_close_legacy_display_system(dev_priv); + if (dev_priv->sou_priv) + vmw_kms_close_screen_object_display(dev_priv); + else + vmw_kms_close_legacy_display_system(dev_priv); return 0; } diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a..86980fe 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -21,6 +21,7 @@ * General Public License for more details. */ +#include <linux/module.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/pm_runtime.h> @@ -108,10 +109,8 @@ static int __devinit u8500_hsem_probe(struct platform_device *pdev) return -ENODEV; io_base = ioremap(res->start, resource_size(res)); - if (!io_base) { - ret = -ENOMEM; - goto free_state; - } + if (!io_base) + return -ENOMEM; /* make sure protocol 1 is selected */ val = readl(io_base + HSEM_CTRL_REG); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 472aedf..297e260 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3110,7 +3110,7 @@ static void handle_stripe(struct stripe_head *sh) struct r5dev *pdev, *qdev; clear_bit(STRIPE_HANDLE, &sh->state); - if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) { + if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) { /* already being handled, ensure it gets handled * again when current action finishes */ set_bit(STRIPE_HANDLE, &sh->state); @@ -3159,10 +3159,14 @@ static void handle_stripe(struct stripe_head *sh) /* check if the array has lost more than max_degraded devices and, * if so, some requests might need to be failed. */ - if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written) - handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); - if (s.failed > conf->max_degraded && s.syncing) - handle_failed_sync(conf, sh, &s); + if (s.failed > conf->max_degraded) { + sh->check_state = 0; + sh->reconstruct_state = 0; + if (s.to_read+s.to_write+s.written) + handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); + if (s.syncing) + handle_failed_sync(conf, sh, &s); + } /* * might be able to return some write requests if the parity blocks @@ -3371,7 +3375,7 @@ finish: return_io(s.return_bi); - clear_bit(STRIPE_ACTIVE, &sh->state); + clear_bit_unlock(STRIPE_ACTIVE, &sh->state); } static void raid5_activate_delayed(struct r5conf *conf) diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c index 2446736..0df7f2a 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/video/s5k6aa.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/media.h> +#include <linux/module.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c index 4175544..ec10629 100644 --- a/drivers/mfd/ab5500-core.c +++ b/drivers/mfd/ab5500-core.c @@ -13,6 +13,7 @@ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. */ +#include <linux/module.h> #include <linux/mutex.h> #include <linux/err.h> #include <linux/platform_device.h> diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index 6be1fe6..43c0ebb 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -4,6 +4,7 @@ * Debugfs support for the AB5500 MFD driver */ +#include <linux/export.h> #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/mfd/ab5500/ab5500.h> diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c index 608967f..736ca10 100644 --- a/drivers/mtd/maps/bcm963xx-flash.c +++ b/drivers/mtd/maps/bcm963xx-flash.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/module.h> #include <linux/mtd/map.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f4e3d82..7f43cf8 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -83,8 +83,10 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n - depends on POWER_SUPPLY depends on SERIO_I8042 + select POWER_SUPPLY + select LEDS_CLASS + select NEW_LEDS default n ---help--- This driver adds support for rfkill and backlight control to Dell diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 4cb0d0a..fc7bbba 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -66,14 +66,16 @@ static int debug; module_param(debug, int, 0600); -#define T1 (HZ/10) -#define T2 (HZ/3) -#define N2 3 +/* Defaults: these are from the specification */ + +#define T1 10 /* 100mS */ +#define T2 34 /* 333mS */ +#define N2 3 /* Retry 3 times */ /* Use long timers for testing at low speed with debug on */ #ifdef DEBUG_TIMING -#define T1 HZ -#define T2 (2 * HZ) +#define T1 100 +#define T2 200 #endif /* diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 5a5d325..634608d2 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -147,14 +147,12 @@ struct btrfs_inode { * the btrfs file release call will add this inode to the * ordered operations list so that we make sure to flush out any * new data the application may have written before commit. - * - * yes, its silly to have a single bitflag, but we might grow more - * of these. */ unsigned ordered_data_close:1; unsigned orphan_meta_reserved:1; unsigned dummy_inode:1; unsigned in_defrag:1; + unsigned delalloc_meta_reserved:1; /* * always compress this one file diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 3a1b939..5b16357 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -617,12 +617,14 @@ static void btrfs_delayed_item_release_metadata(struct btrfs_root *root, static int btrfs_delayed_inode_reserve_metadata( struct btrfs_trans_handle *trans, struct btrfs_root *root, + struct inode *inode, struct btrfs_delayed_node *node) { struct btrfs_block_rsv *src_rsv; struct btrfs_block_rsv *dst_rsv; u64 num_bytes; int ret; + int release = false; src_rsv = trans->block_rsv; dst_rsv = &root->fs_info->delayed_block_rsv; @@ -652,12 +654,65 @@ static int btrfs_delayed_inode_reserve_metadata( if (!ret) node->bytes_reserved = num_bytes; return ret; + } else if (src_rsv == &root->fs_info->delalloc_block_rsv) { + spin_lock(&BTRFS_I(inode)->lock); + if (BTRFS_I(inode)->delalloc_meta_reserved) { + BTRFS_I(inode)->delalloc_meta_reserved = 0; + spin_unlock(&BTRFS_I(inode)->lock); + release = true; + goto migrate; + } + spin_unlock(&BTRFS_I(inode)->lock); + + /* Ok we didn't have space pre-reserved. This shouldn't happen + * too often but it can happen if we do delalloc to an existing + * inode which gets dirtied because of the time update, and then + * isn't touched again until after the transaction commits and + * then we try to write out the data. First try to be nice and + * reserve something strictly for us. If not be a pain and try + * to steal from the delalloc block rsv. + */ + ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes); + if (!ret) + goto out; + + ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); + if (!ret) + goto out; + + /* + * Ok this is a problem, let's just steal from the global rsv + * since this really shouldn't happen that often. + */ + WARN_ON(1); + ret = btrfs_block_rsv_migrate(&root->fs_info->global_block_rsv, + dst_rsv, num_bytes); + goto out; } +migrate: ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); + +out: + /* + * Migrate only takes a reservation, it doesn't touch the size of the + * block_rsv. This is to simplify people who don't normally have things + * migrated from their block rsv. If they go to release their + * reservation, that will decrease the size as well, so if migrate + * reduced size we'd end up with a negative size. But for the + * delalloc_meta_reserved stuff we will only know to drop 1 reservation, + * but we could in fact do this reserve/migrate dance several times + * between the time we did the original reservation and we'd clean it + * up. So to take care of this, release the space for the meta + * reservation here. I think it may be time for a documentation page on + * how block rsvs. work. + */ if (!ret) node->bytes_reserved = num_bytes; + if (release) + btrfs_block_rsv_release(root, src_rsv, num_bytes); + return ret; } @@ -1708,7 +1763,8 @@ int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans, goto release_node; } - ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node); + ret = btrfs_delayed_inode_reserve_metadata(trans, root, inode, + delayed_node); if (ret) goto release_node; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 102c176..62afe5c 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1890,31 +1890,32 @@ struct btrfs_root *open_ctree(struct super_block *sb, u64 features; struct btrfs_key location; struct buffer_head *bh; - struct btrfs_root *extent_root = kzalloc(sizeof(struct btrfs_root), - GFP_NOFS); - struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root), - GFP_NOFS); + struct btrfs_super_block *disk_super; struct btrfs_root *tree_root = btrfs_sb(sb); - struct btrfs_fs_info *fs_info = NULL; - struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root), - GFP_NOFS); - struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root), - GFP_NOFS); + struct btrfs_fs_info *fs_info = tree_root->fs_info; + struct btrfs_root *extent_root; + struct btrfs_root *csum_root; + struct btrfs_root *chunk_root; + struct btrfs_root *dev_root; struct btrfs_root *log_tree_root; - int ret; int err = -EINVAL; int num_backups_tried = 0; int backup_index = 0; - struct btrfs_super_block *disk_super; + extent_root = fs_info->extent_root = + kzalloc(sizeof(struct btrfs_root), GFP_NOFS); + csum_root = fs_info->csum_root = + kzalloc(sizeof(struct btrfs_root), GFP_NOFS); + chunk_root = fs_info->chunk_root = + kzalloc(sizeof(struct btrfs_root), GFP_NOFS); + dev_root = fs_info->dev_root = + kzalloc(sizeof(struct btrfs_root), GFP_NOFS); - if (!extent_root || !tree_root || !tree_root->fs_info || - !chunk_root || !dev_root || !csum_root) { + if (!extent_root || !csum_root || !chunk_root || !dev_root) { err = -ENOMEM; goto fail; } - fs_info = tree_root->fs_info; ret = init_srcu_struct(&fs_info->subvol_srcu); if (ret) { @@ -1954,12 +1955,6 @@ struct btrfs_root *open_ctree(struct super_block *sb, mutex_init(&fs_info->reloc_mutex); init_completion(&fs_info->kobj_unregister); - fs_info->tree_root = tree_root; - fs_info->extent_root = extent_root; - fs_info->csum_root = csum_root; - fs_info->chunk_root = chunk_root; - fs_info->dev_root = dev_root; - fs_info->fs_devices = fs_devices; INIT_LIST_HEAD(&fs_info->dirty_cowonly_roots); INIT_LIST_HEAD(&fs_info->space_info); btrfs_mapping_init(&fs_info->mapping_tree); @@ -2465,21 +2460,20 @@ fail_sb_buffer: btrfs_stop_workers(&fs_info->caching_workers); fail_alloc: fail_iput: + btrfs_mapping_tree_free(&fs_info->mapping_tree); + invalidate_inode_pages2(fs_info->btree_inode->i_mapping); iput(fs_info->btree_inode); - - btrfs_close_devices(fs_info->fs_devices); - btrfs_mapping_tree_free(&fs_info->mapping_tree); fail_bdi: bdi_destroy(&fs_info->bdi); fail_srcu: cleanup_srcu_struct(&fs_info->subvol_srcu); fail: + btrfs_close_devices(fs_info->fs_devices); free_fs_info(fs_info); return ERR_PTR(err); recovery_tree_root: - if (!btrfs_test_opt(tree_root, RECOVERY)) goto fail_tree_roots; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9879bd4..b232150 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3797,16 +3797,16 @@ void btrfs_free_block_rsv(struct btrfs_root *root, kfree(rsv); } -int btrfs_block_rsv_add(struct btrfs_root *root, - struct btrfs_block_rsv *block_rsv, - u64 num_bytes) +static inline int __block_rsv_add(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 num_bytes, int flush) { int ret; if (num_bytes == 0) return 0; - ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 1); + ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush); if (!ret) { block_rsv_add_bytes(block_rsv, num_bytes, 1); return 0; @@ -3815,22 +3815,18 @@ int btrfs_block_rsv_add(struct btrfs_root *root, return ret; } +int btrfs_block_rsv_add(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 num_bytes) +{ + return __block_rsv_add(root, block_rsv, num_bytes, 1); +} + int btrfs_block_rsv_add_noflush(struct btrfs_root *root, struct btrfs_block_rsv *block_rsv, u64 num_bytes) { - int ret; - - if (num_bytes == 0) - return 0; - - ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 0); - if (!ret) { - block_rsv_add_bytes(block_rsv, num_bytes, 1); - return 0; - } - - return ret; + return __block_rsv_add(root, block_rsv, num_bytes, 0); } int btrfs_block_rsv_check(struct btrfs_root *root, @@ -4064,23 +4060,30 @@ int btrfs_snap_reserve_metadata(struct btrfs_trans_handle *trans, */ static unsigned drop_outstanding_extent(struct inode *inode) { + unsigned drop_inode_space = 0; unsigned dropped_extents = 0; BUG_ON(!BTRFS_I(inode)->outstanding_extents); BTRFS_I(inode)->outstanding_extents--; + if (BTRFS_I(inode)->outstanding_extents == 0 && + BTRFS_I(inode)->delalloc_meta_reserved) { + drop_inode_space = 1; + BTRFS_I(inode)->delalloc_meta_reserved = 0; + } + /* * If we have more or the same amount of outsanding extents than we have * reserved then we need to leave the reserved extents count alone. */ if (BTRFS_I(inode)->outstanding_extents >= BTRFS_I(inode)->reserved_extents) - return 0; + return drop_inode_space; dropped_extents = BTRFS_I(inode)->reserved_extents - BTRFS_I(inode)->outstanding_extents; BTRFS_I(inode)->reserved_extents -= dropped_extents; - return dropped_extents; + return dropped_extents + drop_inode_space; } /** @@ -4166,9 +4169,18 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) nr_extents = BTRFS_I(inode)->outstanding_extents - BTRFS_I(inode)->reserved_extents; BTRFS_I(inode)->reserved_extents += nr_extents; + } - to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); + /* + * Add an item to reserve for updating the inode when we complete the + * delalloc io. + */ + if (!BTRFS_I(inode)->delalloc_meta_reserved) { + nr_extents++; + BTRFS_I(inode)->delalloc_meta_reserved = 1; } + + to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); to_reserve += calc_csum_metadata_size(inode, num_bytes, 1); spin_unlock(&BTRFS_I(inode)->lock); diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 7a15fcf..181760f 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -537,6 +537,13 @@ static int io_ctl_read_entry(struct io_ctl *io_ctl, struct btrfs_free_space *entry, u8 *type) { struct btrfs_free_space_entry *e; + int ret; + + if (!io_ctl->cur) { + ret = io_ctl_check_crc(io_ctl, io_ctl->index); + if (ret) + return ret; + } e = io_ctl->cur; entry->offset = le64_to_cpu(e->offset); @@ -550,10 +557,7 @@ static int io_ctl_read_entry(struct io_ctl *io_ctl, io_ctl_unmap_page(io_ctl); - if (io_ctl->index >= io_ctl->num_pages) - return 0; - - return io_ctl_check_crc(io_ctl, io_ctl->index); + return 0; } static int io_ctl_read_bitmap(struct io_ctl *io_ctl, @@ -561,9 +565,6 @@ static int io_ctl_read_bitmap(struct io_ctl *io_ctl, { int ret; - if (io_ctl->cur && io_ctl->cur != io_ctl->orig) - io_ctl_unmap_page(io_ctl); - ret = io_ctl_check_crc(io_ctl, io_ctl->index); if (ret) return ret; @@ -699,6 +700,8 @@ int __load_free_space_cache(struct btrfs_root *root, struct inode *inode, num_entries--; } + io_ctl_unmap_page(&io_ctl); + /* * We add the bitmaps at the end of the entries in order that * the bitmap entries are added to the cache. diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index 53dcbdf..f8962a9 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -398,6 +398,8 @@ int btrfs_save_ino_cache(struct btrfs_root *root, struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; struct btrfs_path *path; struct inode *inode; + struct btrfs_block_rsv *rsv; + u64 num_bytes; u64 alloc_hint = 0; int ret; int prealloc; @@ -421,11 +423,26 @@ int btrfs_save_ino_cache(struct btrfs_root *root, if (!path) return -ENOMEM; + rsv = trans->block_rsv; + trans->block_rsv = &root->fs_info->trans_block_rsv; + + num_bytes = trans->bytes_reserved; + /* + * 1 item for inode item insertion if need + * 3 items for inode item update (in the worst case) + * 1 item for free space object + * 3 items for pre-allocation + */ + trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 8); + ret = btrfs_block_rsv_add_noflush(root, trans->block_rsv, + trans->bytes_reserved); + if (ret) + goto out; again: inode = lookup_free_ino_inode(root, path); if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) { ret = PTR_ERR(inode); - goto out; + goto out_release; } if (IS_ERR(inode)) { @@ -434,7 +451,7 @@ again: ret = create_free_ino_inode(root, trans, path); if (ret) - goto out; + goto out_release; goto again; } @@ -477,11 +494,14 @@ again: } btrfs_free_reserved_data_space(inode, prealloc); + ret = btrfs_write_out_ino_cache(root, trans, path); out_put: iput(inode); +out_release: + btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved); out: - if (ret == 0) - ret = btrfs_write_out_ino_cache(root, trans, path); + trans->block_rsv = rsv; + trans->bytes_reserved = num_bytes; btrfs_free_path(path); return ret; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 966ddcc..116ab67 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -93,6 +93,8 @@ static noinline int cow_file_range(struct inode *inode, struct page *locked_page, u64 start, u64 end, int *page_started, unsigned long *nr_written, int unlock); +static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *inode); static int btrfs_init_inode_security(struct btrfs_trans_handle *trans, struct inode *inode, struct inode *dir, @@ -1741,7 +1743,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); trans->block_rsv = &root->fs_info->delalloc_block_rsv; - ret = btrfs_update_inode(trans, root, inode); + ret = btrfs_update_inode_fallback(trans, root, inode); BUG_ON(ret); } goto out; @@ -1791,7 +1793,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent); if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) { - ret = btrfs_update_inode(trans, root, inode); + ret = btrfs_update_inode_fallback(trans, root, inode); BUG_ON(ret); } ret = 0; @@ -2199,6 +2201,9 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) if (ret) goto out; } + /* release the path since we're done with it */ + btrfs_release_path(path); + root->orphan_cleanup_state = ORPHAN_CLEANUP_DONE; if (root->orphan_block_rsv) @@ -2426,7 +2431,7 @@ static void fill_inode_item(struct btrfs_trans_handle *trans, /* * copy everything in the in-memory inode into the btree. */ -noinline int btrfs_update_inode(struct btrfs_trans_handle *trans, +static noinline int btrfs_update_inode_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode) { struct btrfs_inode_item *inode_item; @@ -2434,21 +2439,6 @@ noinline int btrfs_update_inode(struct btrfs_trans_handle *trans, struct extent_buffer *leaf; int ret; - /* - * If the inode is a free space inode, we can deadlock during commit - * if we put it into the delayed code. - * - * The data relocation inode should also be directly updated - * without delay - */ - if (!btrfs_is_free_space_inode(root, inode) - && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) { - ret = btrfs_delayed_update_inode(trans, root, inode); - if (!ret) - btrfs_set_inode_last_trans(trans, inode); - return ret; - } - path = btrfs_alloc_path(); if (!path) return -ENOMEM; @@ -2477,6 +2467,43 @@ failed: } /* + * copy everything in the in-memory inode into the btree. + */ +noinline int btrfs_update_inode(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *inode) +{ + int ret; + + /* + * If the inode is a free space inode, we can deadlock during commit + * if we put it into the delayed code. + * + * The data relocation inode should also be directly updated + * without delay + */ + if (!btrfs_is_free_space_inode(root, inode) + && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) { + ret = btrfs_delayed_update_inode(trans, root, inode); + if (!ret) + btrfs_set_inode_last_trans(trans, inode); + return ret; + } + + return btrfs_update_inode_item(trans, root, inode); +} + +static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *inode) +{ + int ret; + + ret = btrfs_update_inode(trans, root, inode); + if (ret == -ENOSPC) + return btrfs_update_inode_item(trans, root, inode); + return ret; +} + +/* * unlink helper that gets used here in inode.c and in the tree logging * recovery code. It remove a link in a directory with a given name, and * also drops the back refs in the inode to the directory @@ -5632,7 +5659,7 @@ again: if (test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags)) { ret = btrfs_ordered_update_i_size(inode, 0, ordered); if (!ret) - err = btrfs_update_inode(trans, root, inode); + err = btrfs_update_inode_fallback(trans, root, inode); goto out; } @@ -5670,7 +5697,7 @@ again: add_pending_csums(trans, inode, ordered->file_offset, &ordered->list); ret = btrfs_ordered_update_i_size(inode, 0, ordered); if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags)) - btrfs_update_inode(trans, root, inode); + btrfs_update_inode_fallback(trans, root, inode); ret = 0; out_unlock: unlock_extent_cached(&BTRFS_I(inode)->io_tree, ordered->file_offset, @@ -6529,14 +6556,16 @@ end_trans: ret = btrfs_orphan_del(NULL, inode); } - trans->block_rsv = &root->fs_info->trans_block_rsv; - ret = btrfs_update_inode(trans, root, inode); - if (ret && !err) - err = ret; + if (trans) { + trans->block_rsv = &root->fs_info->trans_block_rsv; + ret = btrfs_update_inode(trans, root, inode); + if (ret && !err) + err = ret; - nr = trans->blocks_used; - ret = btrfs_end_transaction_throttle(trans, root); - btrfs_btree_balance_dirty(root, nr); + nr = trans->blocks_used; + ret = btrfs_end_transaction_throttle(trans, root); + btrfs_btree_balance_dirty(root, nr); + } out: btrfs_free_block_rsv(root, rsv); @@ -6605,6 +6634,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->orphan_meta_reserved = 0; ei->dummy_inode = 0; ei->in_defrag = 0; + ei->delalloc_meta_reserved = 0; ei->force_compress = BTRFS_COMPRESS_NONE; ei->delayed_node = NULL; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 24d654c..dff29d5 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1174,6 +1174,8 @@ static int clone_backref_node(struct btrfs_trans_handle *trans, list_add_tail(&new_edge->list[UPPER], &new_node->lower); } + } else { + list_add_tail(&new_node->lower, &cache->leaves); } rb_node = tree_insert(&cache->rb_root, new_node->bytenr, diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index ed11d38..f4190f2 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -944,50 +944,18 @@ static int scrub_checksum_super(struct scrub_bio *sbio, void *buffer) static int scrub_submit(struct scrub_dev *sdev) { struct scrub_bio *sbio; - struct bio *bio; - int i; if (sdev->curr == -1) return 0; sbio = sdev->bios[sdev->curr]; - - bio = bio_alloc(GFP_NOFS, sbio->count); - if (!bio) - goto nomem; - - bio->bi_private = sbio; - bio->bi_end_io = scrub_bio_end_io; - bio->bi_bdev = sdev->dev->bdev; - bio->bi_sector = sbio->physical >> 9; - - for (i = 0; i < sbio->count; ++i) { - struct page *page; - int ret; - - page = alloc_page(GFP_NOFS); - if (!page) - goto nomem; - - ret = bio_add_page(bio, page, PAGE_SIZE, 0); - if (!ret) { - __free_page(page); - goto nomem; - } - } - sbio->err = 0; sdev->curr = -1; atomic_inc(&sdev->in_flight); - submit_bio(READ, bio); + submit_bio(READ, sbio->bio); return 0; - -nomem: - scrub_free_bio(bio); - - return -ENOMEM; } static int scrub_page(struct scrub_dev *sdev, u64 logical, u64 len, @@ -995,6 +963,8 @@ static int scrub_page(struct scrub_dev *sdev, u64 logical, u64 len, u8 *csum, int force) { struct scrub_bio *sbio; + struct page *page; + int ret; again: /* @@ -1015,12 +985,22 @@ again: } sbio = sdev->bios[sdev->curr]; if (sbio->count == 0) { + struct bio *bio; + sbio->physical = physical; sbio->logical = logical; + bio = bio_alloc(GFP_NOFS, SCRUB_PAGES_PER_BIO); + if (!bio) + return -ENOMEM; + + bio->bi_private = sbio; + bio->bi_end_io = scrub_bio_end_io; + bio->bi_bdev = sdev->dev->bdev; + bio->bi_sector = sbio->physical >> 9; + sbio->err = 0; + sbio->bio = bio; } else if (sbio->physical + sbio->count * PAGE_SIZE != physical || sbio->logical + sbio->count * PAGE_SIZE != logical) { - int ret; - ret = scrub_submit(sdev); if (ret) return ret; @@ -1030,6 +1010,20 @@ again: sbio->spag[sbio->count].generation = gen; sbio->spag[sbio->count].have_csum = 0; sbio->spag[sbio->count].mirror_num = mirror_num; + + page = alloc_page(GFP_NOFS); + if (!page) + return -ENOMEM; + + ret = bio_add_page(sbio->bio, page, PAGE_SIZE, 0); + if (!ret) { + __free_page(page); + ret = scrub_submit(sdev); + if (ret) + return ret; + goto again; + } + if (csum) { sbio->spag[sbio->count].have_csum = 1; memcpy(sbio->spag[sbio->count].csum, csum, sdev->csum_size); diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 57080df..8bd9d6d 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -197,7 +197,7 @@ static match_table_t tokens = { {Opt_subvolrootid, "subvolrootid=%d"}, {Opt_defrag, "autodefrag"}, {Opt_inode_cache, "inode_cache"}, - {Opt_no_space_cache, "no_space_cache"}, + {Opt_no_space_cache, "nospace_cache"}, {Opt_recovery, "recovery"}, {Opt_err, NULL}, }; @@ -448,6 +448,7 @@ static int btrfs_parse_early_options(const char *options, fmode_t flags, token = match_token(p, tokens, args); switch (token) { case Opt_subvol: + kfree(*subvol_name); *subvol_name = match_strdup(&args[0]); break; case Opt_subvolid: @@ -710,7 +711,7 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) if (btrfs_test_opt(root, SPACE_CACHE)) seq_puts(seq, ",space_cache"); else - seq_puts(seq, ",no_space_cache"); + seq_puts(seq, ",nospace_cache"); if (btrfs_test_opt(root, CLEAR_CACHE)) seq_puts(seq, ",clear_cache"); if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED)) @@ -890,7 +891,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, struct super_block *s; struct dentry *root; struct btrfs_fs_devices *fs_devices = NULL; - struct btrfs_root *tree_root = NULL; struct btrfs_fs_info *fs_info = NULL; fmode_t mode = FMODE_READ; char *subvol_name = NULL; @@ -904,8 +904,10 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, error = btrfs_parse_early_options(data, mode, fs_type, &subvol_name, &subvol_objectid, &subvol_rootid, &fs_devices); - if (error) + if (error) { + kfree(subvol_name); return ERR_PTR(error); + } if (subvol_name) { root = mount_subvol(subvol_name, flags, device_name, data); @@ -917,15 +919,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, if (error) return ERR_PTR(error); - error = btrfs_open_devices(fs_devices, mode, fs_type); - if (error) - return ERR_PTR(error); - - if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) { - error = -EACCES; - goto error_close_devices; - } - /* * Setup a dummy root and fs_info for test/set super. This is because * we don't actually fill this stuff out until open_ctree, but we need @@ -933,24 +926,36 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, * then open_ctree will properly initialize everything later. */ fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS); - tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); - if (!fs_info || !tree_root) { + if (!fs_info) + return ERR_PTR(-ENOMEM); + + fs_info->tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); + if (!fs_info->tree_root) { error = -ENOMEM; - goto error_close_devices; + goto error_fs_info; } - fs_info->tree_root = tree_root; + fs_info->tree_root->fs_info = fs_info; fs_info->fs_devices = fs_devices; - tree_root->fs_info = fs_info; fs_info->super_copy = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS); fs_info->super_for_commit = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS); if (!fs_info->super_copy || !fs_info->super_for_commit) { error = -ENOMEM; + goto error_fs_info; + } + + error = btrfs_open_devices(fs_devices, mode, fs_type); + if (error) + goto error_fs_info; + + if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) { + error = -EACCES; goto error_close_devices; } bdev = fs_devices->latest_bdev; - s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root); + s = sget(fs_type, btrfs_test_super, btrfs_set_super, + fs_info->tree_root); if (IS_ERR(s)) { error = PTR_ERR(s); goto error_close_devices; @@ -959,12 +964,12 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, if (s->s_root) { if ((flags ^ s->s_flags) & MS_RDONLY) { deactivate_locked_super(s); - return ERR_PTR(-EBUSY); + error = -EBUSY; + goto error_close_devices; } btrfs_close_devices(fs_devices); free_fs_info(fs_info); - kfree(tree_root); } else { char b[BDEVNAME_SIZE]; @@ -991,8 +996,8 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, error_close_devices: btrfs_close_devices(fs_devices); +error_fs_info: free_fs_info(fs_info); - kfree(tree_root); return ERR_PTR(error); } diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 960835e..6a0574e 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -882,8 +882,8 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_reloc_pre_snapshot(trans, pending, &to_reserve); if (to_reserve > 0) { - ret = btrfs_block_rsv_add(root, &pending->block_rsv, - to_reserve); + ret = btrfs_block_rsv_add_noflush(root, &pending->block_rsv, + to_reserve); if (ret) { pending->error = ret; goto fail; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index f8e29431..c37433d 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -999,7 +999,7 @@ static int btrfs_free_dev_extent(struct btrfs_trans_handle *trans, key.objectid = device->devid; key.offset = start; key.type = BTRFS_DEV_EXTENT_KEY; - +again: ret = btrfs_search_slot(trans, root, &key, path, -1, 1); if (ret > 0) { ret = btrfs_previous_item(root, path, key.objectid, @@ -1012,6 +1012,9 @@ static int btrfs_free_dev_extent(struct btrfs_trans_handle *trans, struct btrfs_dev_extent); BUG_ON(found_key.offset > start || found_key.offset + btrfs_dev_extent_length(leaf, extent) < start); + key = found_key; + btrfs_release_path(path); + goto again; } else if (ret == 0) { leaf = path->nodes[0]; extent = btrfs_item_ptr(leaf, path->slots[0], diff --git a/fs/proc/base.c b/fs/proc/base.c index 2db1bd3..851ba3d 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1652,46 +1652,12 @@ out: return error; } -static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry, - struct kstat *stat) -{ - struct inode *inode = dentry->d_inode; - struct task_struct *task = get_proc_task(inode); - int rc; - - if (task == NULL) - return -ESRCH; - - rc = -EACCES; - if (lock_trace(task)) - goto out_task; - - generic_fillattr(inode, stat); - unlock_trace(task); - rc = 0; -out_task: - put_task_struct(task); - return rc; -} - static const struct inode_operations proc_pid_link_inode_operations = { .readlink = proc_pid_readlink, .follow_link = proc_pid_follow_link, .setattr = proc_setattr, }; -static const struct inode_operations proc_fdinfo_link_inode_operations = { - .setattr = proc_setattr, - .getattr = proc_pid_fd_link_getattr, -}; - -static const struct inode_operations proc_fd_link_inode_operations = { - .readlink = proc_pid_readlink, - .follow_link = proc_pid_follow_link, - .setattr = proc_setattr, - .getattr = proc_pid_fd_link_getattr, -}; - /* building an inode */ @@ -1923,61 +1889,49 @@ out: static int proc_fd_info(struct inode *inode, struct path *path, char *info) { - struct task_struct *task; - struct files_struct *files; + struct task_struct *task = get_proc_task(inode); + struct files_struct *files = NULL; struct file *file; int fd = proc_fd(inode); - int rc; - - task = get_proc_task(inode); - if (!task) - return -ENOENT; - - rc = -EACCES; - if (lock_trace(task)) - goto out_task; - - rc = -ENOENT; - files = get_files_struct(task); - if (files == NULL) - goto out_unlock; - /* - * We are not taking a ref to the file structure, so we must - * hold ->file_lock. - */ - spin_lock(&files->file_lock); - file = fcheck_files(files, fd); - if (file) { - unsigned int f_flags; - struct fdtable *fdt; - - fdt = files_fdtable(files); - f_flags = file->f_flags & ~O_CLOEXEC; - if (FD_ISSET(fd, fdt->close_on_exec)) - f_flags |= O_CLOEXEC; - - if (path) { - *path = file->f_path; - path_get(&file->f_path); + if (task) { + files = get_files_struct(task); + put_task_struct(task); + } + if (files) { + /* + * We are not taking a ref to the file structure, so we must + * hold ->file_lock. + */ + spin_lock(&files->file_lock); + file = fcheck_files(files, fd); + if (file) { + unsigned int f_flags; + struct fdtable *fdt; + + fdt = files_fdtable(files); + f_flags = file->f_flags & ~O_CLOEXEC; + if (FD_ISSET(fd, fdt->close_on_exec)) + f_flags |= O_CLOEXEC; + + if (path) { + *path = file->f_path; + path_get(&file->f_path); + } + if (info) + snprintf(info, PROC_FDINFO_MAX, + "pos:\t%lli\n" + "flags:\t0%o\n", + (long long) file->f_pos, + f_flags); + spin_unlock(&files->file_lock); + put_files_struct(files); + return 0; } - if (info) - snprintf(info, PROC_FDINFO_MAX, - "pos:\t%lli\n" - "flags:\t0%o\n", - (long long) file->f_pos, - f_flags); - rc = 0; - } else - rc = -ENOENT; - spin_unlock(&files->file_lock); - put_files_struct(files); - -out_unlock: - unlock_trace(task); -out_task: - put_task_struct(task); - return rc; + spin_unlock(&files->file_lock); + put_files_struct(files); + } + return -ENOENT; } static int proc_fd_link(struct inode *inode, struct path *path) @@ -2072,7 +2026,7 @@ static struct dentry *proc_fd_instantiate(struct inode *dir, spin_unlock(&files->file_lock); put_files_struct(files); - inode->i_op = &proc_fd_link_inode_operations; + inode->i_op = &proc_pid_link_inode_operations; inode->i_size = 64; ei->op.proc_get_link = proc_fd_link; d_set_d_op(dentry, &tid_fd_dentry_operations); @@ -2104,12 +2058,7 @@ static struct dentry *proc_lookupfd_common(struct inode *dir, if (fd == ~0U) goto out; - result = ERR_PTR(-EACCES); - if (lock_trace(task)) - goto out; - result = instantiate(dir, dentry, task, &fd); - unlock_trace(task); out: put_task_struct(task); out_no_task: @@ -2129,28 +2078,23 @@ static int proc_readfd_common(struct file * filp, void * dirent, retval = -ENOENT; if (!p) goto out_no_task; - - retval = -EACCES; - if (lock_trace(p)) - goto out; - retval = 0; fd = filp->f_pos; switch (fd) { case 0: if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0) - goto out_unlock; + goto out; filp->f_pos++; case 1: ino = parent_ino(dentry); if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0) - goto out_unlock; + goto out; filp->f_pos++; default: files = get_files_struct(p); if (!files) - goto out_unlock; + goto out; rcu_read_lock(); for (fd = filp->f_pos-2; fd < files_fdtable(files)->max_fds; @@ -2174,9 +2118,6 @@ static int proc_readfd_common(struct file * filp, void * dirent, rcu_read_unlock(); put_files_struct(files); } - -out_unlock: - unlock_trace(p); out: put_task_struct(p); out_no_task: @@ -2254,7 +2195,6 @@ static struct dentry *proc_fdinfo_instantiate(struct inode *dir, ei->fd = fd; inode->i_mode = S_IFREG | S_IRUSR; inode->i_fop = &proc_fdinfo_file_operations; - inode->i_op = &proc_fdinfo_link_inode_operations; d_set_d_op(dentry, &tid_fd_dentry_operations); d_add(dentry, inode); /* Close the race of the process dying before we return the dentry */ diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 33b1331..574d4ee 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -189,7 +189,7 @@ xfs_end_io( int error = 0; if (XFS_FORCED_SHUTDOWN(ip->i_mount)) { - error = -EIO; + ioend->io_error = -EIO; goto done; } if (ioend->io_error) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 1a35138..eac97ef 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -656,7 +656,7 @@ xfs_buf_item_committing( /* * This is the ops vector shared by all buf log items. */ -static struct xfs_item_ops xfs_buf_item_ops = { +static const struct xfs_item_ops xfs_buf_item_ops = { .iop_size = xfs_buf_item_size, .iop_format = xfs_buf_item_format, .iop_pin = xfs_buf_item_pin, diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c index bb3f71d..0dee0b7 100644 --- a/fs/xfs/xfs_dquot_item.c +++ b/fs/xfs/xfs_dquot_item.c @@ -295,7 +295,7 @@ xfs_qm_dquot_logitem_committing( /* * This is the ops vector for dquots */ -static struct xfs_item_ops xfs_dquot_item_ops = { +static const struct xfs_item_ops xfs_dquot_item_ops = { .iop_size = xfs_qm_dquot_logitem_size, .iop_format = xfs_qm_dquot_logitem_format, .iop_pin = xfs_qm_dquot_logitem_pin, @@ -483,7 +483,7 @@ xfs_qm_qoff_logitem_committing( { } -static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { +static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { .iop_size = xfs_qm_qoff_logitem_size, .iop_format = xfs_qm_qoff_logitem_format, .iop_pin = xfs_qm_qoff_logitem_pin, @@ -498,7 +498,7 @@ static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { /* * This is the ops vector shared by all quotaoff-start log items. */ -static struct xfs_item_ops xfs_qm_qoff_logitem_ops = { +static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = { .iop_size = xfs_qm_qoff_logitem_size, .iop_format = xfs_qm_qoff_logitem_format, .iop_pin = xfs_qm_qoff_logitem_pin, diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index d22e626..35c2aff 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -217,7 +217,7 @@ xfs_efi_item_committing( /* * This is the ops vector shared by all efi log items. */ -static struct xfs_item_ops xfs_efi_item_ops = { +static const struct xfs_item_ops xfs_efi_item_ops = { .iop_size = xfs_efi_item_size, .iop_format = xfs_efi_item_format, .iop_pin = xfs_efi_item_pin, @@ -477,7 +477,7 @@ xfs_efd_item_committing( /* * This is the ops vector shared by all efd log items. */ -static struct xfs_item_ops xfs_efd_item_ops = { +static const struct xfs_item_ops xfs_efd_item_ops = { .iop_size = xfs_efd_item_size, .iop_format = xfs_efd_item_format, .iop_pin = xfs_efd_item_pin, diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index b7cf21b..abaafdb 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -795,7 +795,7 @@ xfs_inode_item_committing( /* * This is the ops vector shared by all buf log items. */ -static struct xfs_item_ops xfs_inode_item_ops = { +static const struct xfs_item_ops xfs_inode_item_ops = { .iop_size = xfs_inode_item_size, .iop_format = xfs_inode_item_format, .iop_pin = xfs_inode_item_pin, diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 2758a62..a14cd89 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -626,7 +626,7 @@ xfs_log_item_init( struct xfs_mount *mp, struct xfs_log_item *item, int type, - struct xfs_item_ops *ops) + const struct xfs_item_ops *ops) { item->li_mountp = mp; item->li_ailp = mp->m_ail; diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h index 78c9039..3f7bf45 100644 --- a/fs/xfs/xfs_log.h +++ b/fs/xfs/xfs_log.h @@ -137,7 +137,7 @@ struct xfs_trans; void xfs_log_item_init(struct xfs_mount *mp, struct xfs_log_item *item, int type, - struct xfs_item_ops *ops); + const struct xfs_item_ops *ops); xfs_lsn_t xfs_log_done(struct xfs_mount *mp, struct xlog_ticket *ticket, diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h index 603f3eb..3ae713c 100644 --- a/fs/xfs/xfs_trans.h +++ b/fs/xfs/xfs_trans.h @@ -326,7 +326,7 @@ typedef struct xfs_log_item { struct xfs_log_item *); /* buffer item iodone */ /* callback func */ - struct xfs_item_ops *li_ops; /* function list */ + const struct xfs_item_ops *li_ops; /* function list */ /* delayed logging */ struct list_head li_cil; /* CIL pointers */ @@ -341,7 +341,7 @@ typedef struct xfs_log_item { { XFS_LI_IN_AIL, "IN_AIL" }, \ { XFS_LI_ABORTED, "ABORTED" } -typedef struct xfs_item_ops { +struct xfs_item_ops { uint (*iop_size)(xfs_log_item_t *); void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *); void (*iop_pin)(xfs_log_item_t *); @@ -352,7 +352,7 @@ typedef struct xfs_item_ops { void (*iop_push)(xfs_log_item_t *); bool (*iop_pushbuf)(xfs_log_item_t *); void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t); -} xfs_item_ops_t; +}; #define IOP_SIZE(ip) (*(ip)->li_ops->iop_size)(ip) #define IOP_FORMAT(ip,vp) (*(ip)->li_ops->iop_format)(ip, vp) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 4ecf2a5..ce9268a 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -112,7 +112,7 @@ xfs_readlink( char *link) { xfs_mount_t *mp = ip->i_mount; - int pathlen; + xfs_fsize_t pathlen; int error = 0; trace_xfs_readlink(ip); @@ -122,13 +122,19 @@ xfs_readlink( xfs_ilock(ip, XFS_ILOCK_SHARED); - ASSERT(S_ISLNK(ip->i_d.di_mode)); - ASSERT(ip->i_d.di_size <= MAXPATHLEN); - pathlen = ip->i_d.di_size; if (!pathlen) goto out; + if (pathlen < 0 || pathlen > MAXPATHLEN) { + xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)", + __func__, (unsigned long long) ip->i_ino, + (long long) pathlen); + ASSERT(0); + return XFS_ERROR(EFSCORRUPTED); + } + + if (ip->i_df.if_flags & XFS_IFINLINE) { memcpy(link, ip->i_df.if_u1.if_data, pathlen); link[pathlen] = '\0'; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index cf39949..1f9e951 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -990,7 +990,9 @@ struct drm_minor { struct proc_dir_entry *proc_root; /**< proc directory entry */ struct drm_info_node proc_nodes; struct dentry *debugfs_root; - struct drm_info_node debugfs_nodes; + + struct list_head debugfs_list; + struct mutex debugfs_lock; /* Protects debugfs_list. */ struct drm_master *master; /* currently active master for this node */ struct list_head master_list; diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 874c4d2..1d161cb 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -36,11 +36,13 @@ * - this size value would be page-aligned internally. * @flags: user request for setting memory type or cache attributes. * @handle: returned handle for the object. + * @pad: just padding to be 64-bit aligned. */ struct drm_exynos_gem_create { unsigned int size; unsigned int flags; unsigned int handle; + unsigned int pad; }; /** diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index afb9458..98ce812 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -41,7 +41,7 @@ struct devfreq_dev_status { unsigned long total_time; unsigned long busy_time; unsigned long current_frequency; - void *private_date; + void *private_data; }; /** diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index 08a2fee..aad6bd4 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -118,7 +118,6 @@ int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags) static inline void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) { - return 0; } static inline int hwspin_lock_get_id(struct hwspinlock *hwlock) diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index fae2950..83a9cae 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -1963,6 +1963,21 @@ #define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ /* + * R210 (0xD2) - Mic Detect 3 + */ +#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */ +#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */ +#define WM8958_MICD_STS 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */ +#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */ + +/* * R76 (0x4C) - Charge Pump (1) */ #define WM8994_CP_ENA 0x8000 /* CP_ENA */ diff --git a/kernel/power/qos.c b/kernel/power/qos.c index 56db751..995e3bd 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -70,6 +70,7 @@ static struct pm_qos_constraints cpu_dma_constraints = { }; static struct pm_qos_object cpu_dma_pm_qos = { .constraints = &cpu_dma_constraints, + .name = "cpu_dma_latency", }; static BLOCKING_NOTIFIER_HEAD(network_lat_notifier); diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c index 5dbab38..130cfe6 100644 --- a/sound/core/vmaster.c +++ b/sound/core/vmaster.c @@ -52,6 +52,7 @@ struct link_slave { struct link_ctl_info info; int vals[2]; /* current values */ unsigned int flags; + struct snd_kcontrol *kctl; /* original kcontrol pointer */ struct snd_kcontrol slave; /* the copy of original control entry */ }; @@ -252,6 +253,7 @@ int _snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave, slave->count * sizeof(*slave->vd), GFP_KERNEL); if (!srec) return -ENOMEM; + srec->kctl = slave; srec->slave = *slave; memcpy(srec->slave.vd, slave->vd, slave->count * sizeof(*slave->vd)); srec->master = master_link; @@ -333,10 +335,18 @@ static int master_put(struct snd_kcontrol *kcontrol, static void master_free(struct snd_kcontrol *kcontrol) { struct link_master *master = snd_kcontrol_chip(kcontrol); - struct link_slave *slave; - - list_for_each_entry(slave, &master->slaves, list) - slave->master = NULL; + struct link_slave *slave, *n; + + /* free all slave links and retore the original slave kctls */ + list_for_each_entry_safe(slave, n, &master->slaves, list) { + struct snd_kcontrol *sctl = slave->kctl; + struct list_head olist = sctl->list; + memcpy(sctl, &slave->slave, sizeof(*sctl)); + memcpy(sctl->vd, slave->slave.vd, + sctl->count * sizeof(*sctl->vd)); + sctl->list = olist; /* keep the current linked-list */ + kfree(slave); + } kfree(master); } diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 916a186..e44b107 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2331,6 +2331,39 @@ int snd_hda_codec_reset(struct hda_codec *codec) return 0; } +typedef int (*map_slave_func_t)(void *, struct snd_kcontrol *); + +/* apply the function to all matching slave ctls in the mixer list */ +static int map_slaves(struct hda_codec *codec, const char * const *slaves, + map_slave_func_t func, void *data) +{ + struct hda_nid_item *items; + const char * const *s; + int i, err; + + items = codec->mixers.list; + for (i = 0; i < codec->mixers.used; i++) { + struct snd_kcontrol *sctl = items[i].kctl; + if (!sctl || !sctl->id.name || + sctl->id.iface != SNDRV_CTL_ELEM_IFACE_MIXER) + continue; + for (s = slaves; *s; s++) { + if (!strcmp(sctl->id.name, *s)) { + err = func(data, sctl); + if (err) + return err; + break; + } + } + } + return 0; +} + +static int check_slave_present(void *data, struct snd_kcontrol *sctl) +{ + return 1; +} + /** * snd_hda_add_vmaster - create a virtual master control and add slaves * @codec: HD-audio codec @@ -2351,12 +2384,10 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name, unsigned int *tlv, const char * const *slaves) { struct snd_kcontrol *kctl; - const char * const *s; int err; - for (s = slaves; *s && !snd_hda_find_mixer_ctl(codec, *s); s++) - ; - if (!*s) { + err = map_slaves(codec, slaves, check_slave_present, NULL); + if (err != 1) { snd_printdd("No slave found for %s\n", name); return 0; } @@ -2367,23 +2398,10 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name, if (err < 0) return err; - for (s = slaves; *s; s++) { - struct snd_kcontrol *sctl; - int i = 0; - for (;;) { - sctl = _snd_hda_find_mixer_ctl(codec, *s, i); - if (!sctl) { - if (!i) - snd_printdd("Cannot find slave %s, " - "skipped\n", *s); - break; - } - err = snd_ctl_add_slave(kctl, sctl); - if (err < 0) - return err; - i++; - } - } + err = map_slaves(codec, slaves, (map_slave_func_t)snd_ctl_add_slave, + kctl); + if (err < 0) + return err; return 0; } EXPORT_SYMBOL_HDA(snd_hda_add_vmaster); @@ -4752,6 +4770,7 @@ int snd_hda_parse_pin_defcfg(struct hda_codec *codec, memset(sequences_hp, 0, sizeof(sequences_hp)); assoc_line_out = 0; + codec->ignore_misc_bit = true; end_nid = codec->start_nid + codec->num_nodes; for (nid = codec->start_nid; nid < end_nid; nid++) { unsigned int wid_caps = get_wcaps(codec, nid); @@ -4767,6 +4786,9 @@ int snd_hda_parse_pin_defcfg(struct hda_codec *codec, continue; def_conf = snd_hda_codec_get_pincfg(codec, nid); + if (!(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) & + AC_DEFCFG_MISC_NO_PRESENCE)) + codec->ignore_misc_bit = false; conn = get_defcfg_connect(def_conf); if (conn == AC_JACK_PORT_NONE) continue; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 755f2b0..5644711 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -854,6 +854,7 @@ struct hda_codec { unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */ unsigned int pins_shutup:1; /* pins are shut up */ unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */ + unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ unsigned int power_transition :1; /* power-state in transition */ diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index dcbea0d..6579e0f 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -510,13 +510,15 @@ int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid); static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid) { - return (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT) && - /* disable MISC_NO_PRESENCE check because it may break too - * many devices - */ - /*(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid) & - AC_DEFCFG_MISC_NO_PRESENCE)) &&*/ - (get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP); + if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT)) + return false; + if (!codec->ignore_misc_bit && + (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) & + AC_DEFCFG_MISC_NO_PRESENCE)) + return false; + if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP)) + return false; + return true; } /* flags for hda_nid_item */ diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 5e706e4..0de2119 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3062,7 +3062,6 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS), SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), - SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board", CXT5066_LAPTOP), SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a24e068..308bb57 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -284,7 +284,7 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, struct alc_spec *spec = codec->spec; const struct hda_input_mux *imux; unsigned int mux_idx; - int i, type; + int i, type, num_conns; hda_nid_t nid; mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx; @@ -307,16 +307,17 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx]; /* no selection? */ - if (snd_hda_get_conn_list(codec, nid, NULL) <= 1) + num_conns = snd_hda_get_conn_list(codec, nid, NULL); + if (num_conns <= 1) return 1; type = get_wcaps_type(get_wcaps(codec, nid)); if (type == AC_WID_AUD_MIX) { /* Matrix-mixer style (e.g. ALC882) */ - for (i = 0; i < imux->num_items; i++) { - unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE; - snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, - imux->items[i].index, + int active = imux->items[idx].index; + for (i = 0; i < num_conns; i++) { + unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE; + snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i, HDA_AMP_MUTE, v); } } else { diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 4e715fe..edc2b7b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -95,6 +95,7 @@ enum { STAC_92HD83XXX_REF, STAC_92HD83XXX_PWR_REF, STAC_DELL_S14, + STAC_DELL_VOSTRO_3500, STAC_92HD83XXX_HP, STAC_92HD83XXX_HP_cNB11_INTQUAD, STAC_HP_DV7_4000, @@ -1659,6 +1660,12 @@ static const unsigned int dell_s14_pin_configs[10] = { 0x40f000f0, 0x40f000f0, }; +static const unsigned int dell_vostro_3500_pin_configs[10] = { + 0x02a11020, 0x0221101f, 0x400000f0, 0x90170110, + 0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160, + 0x400000f4, 0x400000f5, +}; + static const unsigned int hp_dv7_4000_pin_configs[10] = { 0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110, 0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140, @@ -1675,6 +1682,7 @@ static const unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs, [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs, [STAC_DELL_S14] = dell_s14_pin_configs, + [STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs, [STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs, [STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs, }; @@ -1684,6 +1692,7 @@ static const char * const stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = "ref", [STAC_92HD83XXX_PWR_REF] = "mic-ref", [STAC_DELL_S14] = "dell-s14", + [STAC_DELL_VOSTRO_3500] = "dell-vostro-3500", [STAC_92HD83XXX_HP] = "hp", [STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad", [STAC_HP_DV7_4000] = "hp-dv7-4000", @@ -1697,6 +1706,8 @@ static const struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD83XXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba, "unknown Dell", STAC_DELL_S14), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028, + "Dell Vostro 3500", STAC_DELL_VOSTRO_3500), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600, "HP", STAC_92HD83XXX_HP), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656, diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 29e3125..11718b49 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1077,6 +1077,13 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs } if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV)) continue; + + /* IO read operation is very expensive inside virtual machine + * as it is emulated. The probability that subsequent PICB read + * will return different result is high enough to loop till + * timeout here. + * Same CIV is strict enough condition to be sure that PICB + * is valid inside VM on emulated card. */ if (chip->inside_vm) break; if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) @@ -2930,6 +2937,45 @@ static unsigned int sis_codec_bits[3] = { ICH_PCR, ICH_SCR, ICH_SIS_TCR }; +static int __devinit snd_intel8x0_inside_vm(struct pci_dev *pci) +{ + int result = inside_vm; + char *msg = NULL; + + /* check module parameter first (override detection) */ + if (result >= 0) { + msg = result ? "enable (forced) VM" : "disable (forced) VM"; + goto fini; + } + + /* detect KVM and Parallels virtual environments */ + result = kvm_para_available(); +#ifdef X86_FEATURE_HYPERVISOR + result = result || boot_cpu_has(X86_FEATURE_HYPERVISOR); +#endif + if (!result) + goto fini; + + /* check for known (emulated) devices */ + if (pci->subsystem_vendor == 0x1af4 && + pci->subsystem_device == 0x1100) { + /* KVM emulated sound, PCI SSID: 1af4:1100 */ + msg = "enable KVM"; + } else if (pci->subsystem_vendor == 0x1ab8) { + /* Parallels VM emulated sound, PCI SSID: 1ab8:xxxx */ + msg = "enable Parallels VM"; + } else { + msg = "disable (unknown or VT-d) VM"; + result = 0; + } + +fini: + if (msg != NULL) + printk(KERN_INFO "intel8x0: %s optimization\n", msg); + + return result; +} + static int __devinit snd_intel8x0_create(struct snd_card *card, struct pci_dev *pci, unsigned long device_type, @@ -2997,9 +3043,7 @@ static int __devinit snd_intel8x0_create(struct snd_card *card, if (xbox) chip->xbox = 1; - chip->inside_vm = inside_vm; - if (inside_vm) - printk(KERN_INFO "intel8x0: enable KVM optimization\n"); + chip->inside_vm = snd_intel8x0_inside_vm(pci); if (pci->vendor == PCI_VENDOR_ID_INTEL && pci->device == PCI_DEVICE_ID_INTEL_440MX) @@ -3243,14 +3287,6 @@ static int __devinit snd_intel8x0_probe(struct pci_dev *pci, buggy_irq = 0; } - if (inside_vm < 0) { - /* detect KVM and Parallels virtual environments */ - inside_vm = kvm_para_available(); -#if defined(__i386__) || defined(__x86_64__) - inside_vm = inside_vm || boot_cpu_has(X86_FEATURE_HYPERVISOR); -#endif - } - if ((err = snd_intel8x0_create(card, pci, pci_id->driver_data, &chip)) < 0) { snd_card_free(card); diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6b73efd..9c982e4 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = { static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = wm8994->control_data; + struct wm8994 *control = codec->control_data; switch (reg) { case WM8994_GPIO_1: @@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) { struct wm8994_priv *wm8994 = data; struct snd_soc_codec *codec = wm8994->codec; - int reg; + int reg, count; - reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); - if (reg < 0) { - dev_err(codec->dev, "Failed to read mic detect status: %d\n", - reg); - return IRQ_NONE; - } + /* We may occasionally read a detection without an impedence + * range being provided - if that happens loop again. + */ + count = 10; + do { + reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); + if (reg < 0) { + dev_err(codec->dev, + "Failed to read mic detect status: %d\n", + reg); + return IRQ_NONE; + } - if (!(reg & WM8958_MICD_VALID)) { - dev_dbg(codec->dev, "Mic detect data not valid\n"); - goto out; - } + if (!(reg & WM8958_MICD_VALID)) { + dev_dbg(codec->dev, "Mic detect data not valid\n"); + goto out; + } + + if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK)) + break; + + msleep(1); + } while (count--); + + if (count == 0) + dev_warn(codec->dev, "No impedence range reported for jack\n"); #ifndef CONFIG_SND_SOC_WM8994_MODULE trace_snd_soc_jack_irq(dev_name(codec->dev)); @@ -3180,9 +3195,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR, wm8994_fifo_error, "FIFO error", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN, wm8994_temp_warn, "Thermal warning", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT, wm8994_temp_shut, "Thermal shutdown", codec); ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE, diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 60f65ac..ab23869 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -765,10 +765,61 @@ static void usb_mixer_elem_free(struct snd_kcontrol *kctl) * interface to ALSA control for feature/mixer units */ +/* volume control quirks */ +static void volume_control_quirks(struct usb_mixer_elem_info *cval, + struct snd_kcontrol *kctl) +{ + switch (cval->mixer->chip->usb_id) { + case USB_ID(0x0471, 0x0101): + case USB_ID(0x0471, 0x0104): + case USB_ID(0x0471, 0x0105): + case USB_ID(0x0672, 0x1041): + /* quirk for UDA1321/N101. + * note that detection between firmware 2.1.1.7 (N101) + * and later 2.1.1.21 is not very clear from datasheets. + * I hope that the min value is -15360 for newer firmware --jk + */ + if (!strcmp(kctl->id.name, "PCM Playback Volume") && + cval->min == -15616) { + snd_printk(KERN_INFO + "set volume quirk for UDA1321/N101 chip\n"); + cval->max = -256; + } + break; + + case USB_ID(0x046d, 0x09a4): + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set volume quirk for QuickCam E3500\n"); + cval->min = 6080; + cval->max = 8768; + cval->res = 192; + } + break; + + case USB_ID(0x046d, 0x0808): + case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */ + case USB_ID(0x046d, 0x0991): + /* Most audio usb devices lie about volume resolution. + * Most Logitech webcams have res = 384. + * Proboly there is some logitech magic behind this number --fishor + */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set resolution quirk: cval->res = 384\n"); + cval->res = 384; + } + break; + + } +} + /* * retrieve the minimum and maximum values for the specified control */ -static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) +static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval, + int default_min, struct snd_kcontrol *kctl) { /* for failsafe */ cval->min = default_min; @@ -844,6 +895,9 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) cval->initialized = 1; } + if (kctl) + volume_control_quirks(cval, kctl); + /* USB descriptions contain the dB scale in 1/256 dB unit * while ALSA TLV contains in 1/100 dB unit */ @@ -864,6 +918,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) return 0; } +#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL) /* get a feature/mixer unit info */ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) @@ -882,7 +937,7 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_ uinfo->value.integer.max = 1; } else { if (!cval->initialized) { - get_min_max(cval, 0); + get_min_max_with_quirks(cval, 0, kcontrol); if (cval->initialized && cval->dBmin >= cval->dBmax) { kcontrol->vd[0].access &= ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ | @@ -1045,9 +1100,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, cval->ch_readonly = readonly_mask; } - /* get min/max values */ - get_min_max(cval, 0); - /* if all channels in the mask are marked read-only, make the control * read-only. set_cur_mix_value() will check the mask again and won't * issue write commands to read-only channels. */ @@ -1069,6 +1121,9 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name)); + /* get min/max values */ + get_min_max_with_quirks(cval, 0, kctl); + switch (control) { case UAC_FU_MUTE: case UAC_FU_VOLUME: @@ -1118,51 +1173,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, break; } - /* volume control quirks */ - switch (state->chip->usb_id) { - case USB_ID(0x0471, 0x0101): - case USB_ID(0x0471, 0x0104): - case USB_ID(0x0471, 0x0105): - case USB_ID(0x0672, 0x1041): - /* quirk for UDA1321/N101. - * note that detection between firmware 2.1.1.7 (N101) - * and later 2.1.1.21 is not very clear from datasheets. - * I hope that the min value is -15360 for newer firmware --jk - */ - if (!strcmp(kctl->id.name, "PCM Playback Volume") && - cval->min == -15616) { - snd_printk(KERN_INFO - "set volume quirk for UDA1321/N101 chip\n"); - cval->max = -256; - } - break; - - case USB_ID(0x046d, 0x09a4): - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set volume quirk for QuickCam E3500\n"); - cval->min = 6080; - cval->max = 8768; - cval->res = 192; - } - break; - - case USB_ID(0x046d, 0x0808): - case USB_ID(0x046d, 0x0809): - case USB_ID(0x046d, 0x0991): - /* Most audio usb devices lie about volume resolution. - * Most Logitech webcams have res = 384. - * Proboly there is some logitech magic behind this number --fishor - */ - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set resolution quirk: cval->res = 384\n"); - cval->res = 384; - } - break; - - } - range = (cval->max - cval->min) / cval->res; /* Are there devices with volume range more than 255? I use a bit more * to be sure. 384 is a resolution magic number found on Logitech diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 2e5bc73..a3ddac0 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -137,12 +137,12 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip, return -ENOMEM; } if (fp->nr_rates > 0) { - rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL); + rate_table = kmemdup(fp->rate_table, + sizeof(int) * fp->nr_rates, GFP_KERNEL); if (!rate_table) { kfree(fp); return -ENOMEM; } - memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates); fp->rate_table = rate_table; } @@ -224,10 +224,9 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip, if (altsd->bNumEndpoints != 1) return -ENXIO; - fp = kmalloc(sizeof(*fp), GFP_KERNEL); + fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL); if (!fp) return -ENOMEM; - memcpy(fp, &ua_format, sizeof(*fp)); fp->iface = altsd->bInterfaceNumber; fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 8d02ccb..30e2bef 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -42,6 +42,7 @@ $default{"BISECT_MANUAL"} = 0; $default{"BISECT_SKIP"} = 1; $default{"SUCCESS_LINE"} = "login:"; $default{"DETECT_TRIPLE_FAULT"} = 1; +$default{"NO_INSTALL"} = 0; $default{"BOOTED_TIMEOUT"} = 1; $default{"DIE_ON_FAILURE"} = 1; $default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND"; @@ -84,6 +85,7 @@ my $grub_number; my $target; my $make; my $post_install; +my $no_install; my $noclean; my $minconfig; my $start_minconfig; @@ -115,6 +117,7 @@ my $timeout; my $booted_timeout; my $detect_triplefault; my $console; +my $reboot_success_line; my $success_line; my $stop_after_success; my $stop_after_failure; @@ -130,6 +133,12 @@ my %config_help; my %variable; my %force_config; +# do not force reboots on config problems +my $no_reboot = 1; + +# default variables that can be used +chomp ($variable{"PWD"} = `pwd`); + $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. EOF @@ -241,6 +250,7 @@ sub read_yn { sub get_ktest_config { my ($config) = @_; + my $ans; return if (defined($opt{$config})); @@ -254,16 +264,17 @@ sub get_ktest_config { if (defined($default{$config})) { print "\[$default{$config}\] "; } - $entered_configs{$config} = <STDIN>; - $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/; - if ($entered_configs{$config} =~ /^\s*$/) { + $ans = <STDIN>; + $ans =~ s/^\s*(.*\S)\s*$/$1/; + if ($ans =~ /^\s*$/) { if ($default{$config}) { - $entered_configs{$config} = $default{$config}; + $ans = $default{$config}; } else { print "Your answer can not be blank\n"; next; } } + $entered_configs{$config} = process_variables($ans); last; } } @@ -298,7 +309,7 @@ sub get_ktest_configs { } sub process_variables { - my ($value) = @_; + my ($value, $remove_undef) = @_; my $retval = ""; # We want to check for '\', and it is just easier @@ -316,6 +327,10 @@ sub process_variables { $retval = "$retval$begin"; if (defined($variable{$var})) { $retval = "$retval$variable{$var}"; + } elsif (defined($remove_undef) && $remove_undef) { + # for if statements, any variable that is not defined, + # we simple convert to 0 + $retval = "${retval}0"; } else { # put back the origin piece. $retval = "$retval\$\{$var\}"; @@ -331,10 +346,17 @@ sub process_variables { } sub set_value { - my ($lvalue, $rvalue) = @_; + my ($lvalue, $rvalue, $override, $overrides, $name) = @_; if (defined($opt{$lvalue})) { - die "Error: Option $lvalue defined more than once!\n"; + if (!$override || defined(${$overrides}{$lvalue})) { + my $extra = ""; + if ($override) { + $extra = "In the same override section!\n"; + } + die "$name: $.: Option $lvalue defined more than once!\n$extra"; + } + ${$overrides}{$lvalue} = $rvalue; } if ($rvalue =~ /^\s*$/) { delete $opt{$lvalue}; @@ -355,86 +377,274 @@ sub set_variable { } } -sub read_config { - my ($config) = @_; +sub process_compare { + my ($lval, $cmp, $rval) = @_; + + # remove whitespace + + $lval =~ s/^\s*//; + $lval =~ s/\s*$//; + + $rval =~ s/^\s*//; + $rval =~ s/\s*$//; + + if ($cmp eq "==") { + return $lval eq $rval; + } elsif ($cmp eq "!=") { + return $lval ne $rval; + } + + my $statement = "$lval $cmp $rval"; + my $ret = eval $statement; + + # $@ stores error of eval + if ($@) { + return -1; + } + + return $ret; +} + +sub value_defined { + my ($val) = @_; + + return defined($variable{$2}) || + defined($opt{$2}); +} + +my $d = 0; +sub process_expression { + my ($name, $val) = @_; + + my $c = $d++; + + while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) { + my $express = $1; + + if (process_expression($name, $express)) { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /; + } else { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /; + } + } + + $d--; + my $OR = "\\|\\|"; + my $AND = "\\&\\&"; + + while ($val =~ s/^(.*?)($OR|$AND)//) { + my $express = $1; + my $op = $2; + + if (process_expression($name, $express)) { + if ($op eq "||") { + return 1; + } + } else { + if ($op eq "&&") { + return 0; + } + } + } + + if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { + my $ret = process_compare($1, $2, $3); + if ($ret < 0) { + die "$name: $.: Unable to process comparison\n"; + } + return $ret; + } + + if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) { + if (defined $1) { + return !value_defined($2); + } else { + return value_defined($2); + } + } + + if ($val =~ /^\s*0\s*$/) { + return 0; + } elsif ($val =~ /^\s*\d+\s*$/) { + return 1; + } + + die ("$name: $.: Undefined content $val in if statement\n"); +} + +sub process_if { + my ($name, $value) = @_; + + # Convert variables and replace undefined ones with 0 + my $val = process_variables($value, 1); + my $ret = process_expression $name, $val; + + return $ret; +} - open(IN, $config) || die "can't read file $config"; +sub __read_config { + my ($config, $current_test_num) = @_; + + my $in; + open($in, $config) || die "can't read file $config"; my $name = $config; $name =~ s,.*/(.*),$1,; - my $test_num = 0; + my $test_num = $$current_test_num; my $default = 1; my $repeat = 1; my $num_tests_set = 0; my $skip = 0; my $rest; + my $line; my $test_case = 0; + my $if = 0; + my $if_set = 0; + my $override = 0; - while (<IN>) { + my %overrides; + + while (<$in>) { # ignore blank lines and comments next if (/^\s*$/ || /\s*\#/); - if (/^\s*TEST_START(.*)/) { + if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) { - $rest = $1; + my $type = $1; + $rest = $2; + $line = $2; - if ($num_tests_set) { - die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; - } + my $old_test_num; + my $old_repeat; + $override = 0; + + if ($type eq "TEST_START") { + + if ($num_tests_set) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } - my $old_test_num = $test_num; - my $old_repeat = $repeat; + $old_test_num = $test_num; + $old_repeat = $repeat; - $test_num += $repeat; - $default = 0; - $repeat = 1; + $test_num += $repeat; + $default = 0; + $repeat = 1; + } else { + $default = 1; + } - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; + # If SKIP is anywhere in the line, the command will be skipped + if ($rest =~ s/\s+SKIP\b//) { $skip = 1; } else { $test_case = 1; $skip = 0; } - if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { - $repeat = $1; - $rest = $2; - $repeat_tests{"$test_num"} = $repeat; + if ($rest =~ s/\sELSE\b//) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $if = 0; + + if ($if_set) { + $skip = 1; + } else { + $skip = 0; + } } - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; - $skip = 1; + if ($rest =~ s/\sIF\s+(.*)//) { + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + $if = 1; + } else { + $if = 0; + $if_set = 0; } - if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after TEST_START\n$_"; + if (!$skip) { + if ($type eq "TEST_START") { + if ($rest =~ s/\s+ITERATE\s+(\d+)//) { + $repeat = $1; + $repeat_tests{"$test_num"} = $repeat; + } + } elsif ($rest =~ s/\sOVERRIDE\b//) { + # DEFAULT only + $override = 1; + # Clear previous overrides + %overrides = (); + } + } + + if (!$skip && $rest !~ /^\s*$/) { + die "$name: $.: Gargbage found after $type\n$_"; } - if ($skip) { + if ($skip && $type eq "TEST_START") { $test_num = $old_test_num; $repeat = $old_repeat; } - } elsif (/^\s*DEFAULTS(.*)$/) { - $default = 1; - + } elsif (/^\s*ELSE\b(.*)$/) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } $rest = $1; - - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; + if ($if_set) { $skip = 1; + $rest = ""; } else { $skip = 0; + + if ($rest =~ /\sIF\s+(.*)/) { + # May be a ELSE IF section. + if (!process_if($name, $1)) { + $skip = 1; + } + $rest = ""; + } else { + $if = 0; + } } if ($rest !~ /^\s*$/) { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } + } elsif (/^\s*INCLUDE\s+(\S+)/) { + + next if ($skip); + + if (!$default) { + die "$name: $.: INCLUDE can only be done in default sections\n$_"; + } + + my $file = process_variables($1); + + if ($file !~ m,^/,) { + # check the path of the config file first + if ($config =~ m,(.*)/,) { + if (-f "$1/$file") { + $file = "$1/$file"; + } + } + } + + if ( ! -r $file ) { + die "$name: $.: Can't read file $file\n$_"; + } + + if (__read_config($file, \$test_num)) { + $test_case = 1; + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); @@ -460,10 +670,10 @@ sub read_config { } if ($default || $lvalue =~ /\[\d+\]$/) { - set_value($lvalue, $rvalue); + set_value($lvalue, $rvalue, $override, \%overrides, $name); } else { my $val = "$lvalue\[$test_num\]"; - set_value($val, $rvalue); + set_value($val, $rvalue, $override, \%overrides, $name); if ($repeat > 1) { $repeats{$val} = $repeat; @@ -490,13 +700,26 @@ sub read_config { } } - close(IN); - if ($test_num) { $test_num += $repeat - 1; $opt{"NUM_TESTS"} = $test_num; } + close($in); + + $$current_test_num = $test_num; + + return $test_case; +} + +sub read_config { + my ($config) = @_; + + my $test_case; + my $test_num = 0; + + $test_case = __read_config $config, \$test_num; + # make sure we have all mandatory configs get_ktest_configs; @@ -603,8 +826,20 @@ sub doprint { } sub run_command; +sub start_monitor; +sub end_monitor; +sub wait_for_monitor; sub reboot { + my ($time) = @_; + + if (defined($time)) { + start_monitor; + # flush out current monitor + # May contain the reboot success line + wait_for_monitor 1; + } + # try to reboot normally if (run_command $reboot) { if (defined($powercycle_after_reboot)) { @@ -615,12 +850,17 @@ sub reboot { # nope? power cycle it. run_command "$power_cycle"; } + + if (defined($time)) { + wait_for_monitor($time, $reboot_success_line); + end_monitor; + } } sub do_not_reboot { my $i = $iteration; - return $test_type eq "build" || + return $test_type eq "build" || $no_reboot || ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") || ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build"); } @@ -693,16 +933,29 @@ sub end_monitor { } sub wait_for_monitor { - my ($time) = @_; + my ($time, $stop) = @_; + my $full_line = ""; my $line; + my $booted = 0; doprint "** Wait for monitor to settle down **\n"; # read the monitor and wait for the system to calm down - do { + while (!$booted) { $line = wait_for_input($monitor_fp, $time); - print "$line" if (defined($line)); - } while (defined($line)); + last if (!defined($line)); + print "$line"; + $full_line .= $line; + + if (defined($stop) && $full_line =~ /$stop/) { + doprint "wait for monitor detected $stop\n"; + $booted = 1; + } + + if ($line =~ /\n/) { + $full_line = ""; + } + } print "** Monitor flushed **\n"; } @@ -719,10 +972,7 @@ sub fail { # no need to reboot for just building. if (!do_not_reboot) { doprint "REBOOTING\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } my $name = ""; @@ -854,9 +1104,12 @@ sub get_grub_index { open(IN, "$ssh_grub |") or die "unable to get menu.lst"; + my $found = 0; + while (<IN>) { if (/^\s*title\s+$grub_menu\s*$/) { $grub_number++; + $found = 1; last; } elsif (/^\s*title\s/) { $grub_number++; @@ -865,7 +1118,7 @@ sub get_grub_index { close(IN); die "Could not find '$grub_menu' in /boot/grub/menu on $machine" - if ($grub_number < 0); + if (!$found); doprint "$grub_number\n"; } @@ -902,7 +1155,8 @@ sub wait_for_input sub reboot_to { if ($reboot_type eq "grub") { - run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'"; + run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; + reboot; return; } @@ -1083,6 +1337,8 @@ sub do_post_install { sub install { + return if ($no_install); + run_scp "$outputdir/$build_target", "$target_image" or dodie "failed to copy image"; @@ -1140,6 +1396,11 @@ sub get_version { } sub start_monitor_and_boot { + # Make sure the stable kernel has finished booting + start_monitor; + wait_for_monitor 5; + end_monitor; + get_grub_index; get_version; install; @@ -1250,6 +1511,10 @@ sub build { unlink $buildlog; + # Failed builds should not reboot the target + my $save_no_reboot = $no_reboot; + $no_reboot = 1; + if (defined($pre_build)) { my $ret = run_command $pre_build; if (!$ret && defined($pre_build_die) && @@ -1272,15 +1537,15 @@ sub build { # allow for empty configs run_command "touch $output_config"; - run_command "mv $output_config $outputdir/config_temp" or - dodie "moving .config"; + if (!$noclean) { + run_command "mv $output_config $outputdir/config_temp" or + dodie "moving .config"; - if (!$noclean && !run_command "$make mrproper") { - dodie "make mrproper"; - } + run_command "$make mrproper" or dodie "make mrproper"; - run_command "mv $outputdir/config_temp $output_config" or - dodie "moving config_temp"; + run_command "mv $outputdir/config_temp $output_config" or + dodie "moving config_temp"; + } } elsif (!$noclean) { unlink "$output_config"; @@ -1318,10 +1583,15 @@ sub build { if (!$build_ret) { # bisect may need this to pass - return 0 if ($in_bisect); + if ($in_bisect) { + $no_reboot = $save_no_reboot; + return 0; + } fail "failed build" and return 0; } + $no_reboot = $save_no_reboot; + return 1; } @@ -1356,10 +1626,7 @@ sub success { if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) { doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } } @@ -1500,10 +1767,7 @@ sub run_git_bisect { sub bisect_reboot { doprint "Reboot and sleep $bisect_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $bisect_sleep_time; - end_monitor; + reboot $bisect_sleep_time; } # returns 1 on success, 0 on failure, -1 on skip @@ -2066,10 +2330,7 @@ sub config_bisect { sub patchcheck_reboot { doprint "Reboot and sleep $patchcheck_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $patchcheck_sleep_time; - end_monitor; + reboot $patchcheck_sleep_time; } sub patchcheck { @@ -2178,12 +2439,31 @@ sub patchcheck { } my %depends; +my %depcount; my $iflevel = 0; my @ifdeps; # prevent recursion my %read_kconfigs; +sub add_dep { + # $config depends on $dep + my ($config, $dep) = @_; + + if (defined($depends{$config})) { + $depends{$config} .= " " . $dep; + } else { + $depends{$config} = $dep; + } + + # record the number of configs depending on $dep + if (defined $depcount{$dep}) { + $depcount{$dep}++; + } else { + $depcount{$dep} = 1; + } +} + # taken from streamline_config.pl sub read_kconfig { my ($kconfig) = @_; @@ -2230,30 +2510,19 @@ sub read_kconfig { $config = $2; for (my $i = 0; $i < $iflevel; $i++) { - if ($i) { - $depends{$config} .= " " . $ifdeps[$i]; - } else { - $depends{$config} = $ifdeps[$i]; - } - $state = "DEP"; + add_dep $config, $ifdeps[$i]; } # collect the depends for the config } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { - if (defined($depends{$1})) { - $depends{$config} .= " " . $1; - } else { - $depends{$config} = $1; - } + add_dep $config, $1; # Get the configs that select this config - } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { - if (defined($depends{$1})) { - $depends{$1} .= " " . $config; - } else { - $depends{$1} = $config; - } + } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) { + + # selected by depends on config + add_dep $1, $config; # Check for if statements } elsif (/^if\s+(.*\S)\s*$/) { @@ -2365,11 +2634,18 @@ sub make_new_config { close OUT; } +sub chomp_config { + my ($config) = @_; + + $config =~ s/CONFIG_//; + + return $config; +} + sub get_depends { my ($dep) = @_; - my $kconfig = $dep; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $dep; $dep = $depends{"$kconfig"}; @@ -2419,8 +2695,7 @@ sub test_this_config { return undef; } - my $kconfig = $config; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $config; # Test dependencies first if (defined($depends{"$kconfig"})) { @@ -2510,6 +2785,14 @@ sub make_min_config { my @config_keys = keys %min_configs; + # All configs need a depcount + foreach my $config (@config_keys) { + my $kconfig = chomp_config $config; + if (!defined $depcount{$kconfig}) { + $depcount{$kconfig} = 0; + } + } + # Remove anything that was set by the make allnoconfig # we shouldn't need them as they get set for us anyway. foreach my $config (@config_keys) { @@ -2548,8 +2831,13 @@ sub make_min_config { # Now disable each config one by one and do a make oldconfig # till we find a config that changes our list. - # Put configs that did not modify the config at the end. my @test_configs = keys %min_configs; + + # Sort keys by who is most dependent on + @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} } + @test_configs ; + + # Put configs that did not modify the config at the end. my $reset = 1; for (my $i = 0; $i < $#test_configs; $i++) { if (!defined($nochange_config{$test_configs[0]})) { @@ -2659,10 +2947,7 @@ sub make_min_config { } doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } success $i; @@ -2783,6 +3068,9 @@ sub set_test_option { # First we need to do is the builds for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { + # Do not reboot on failing test options + $no_reboot = 1; + $iteration = $i; my $makecmd = set_test_option("MAKE_CMD", $i); @@ -2811,6 +3099,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $reboot_type = set_test_option("REBOOT_TYPE", $i); $grub_menu = set_test_option("GRUB_MENU", $i); $post_install = set_test_option("POST_INSTALL", $i); + $no_install = set_test_option("NO_INSTALL", $i); $reboot_script = set_test_option("REBOOT_SCRIPT", $i); $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i); $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i); @@ -2832,6 +3121,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $console = set_test_option("CONSOLE", $i); $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i); $success_line = set_test_option("SUCCESS_LINE", $i); + $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i); $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i); $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i); $stop_test_after = set_test_option("STOP_TEST_AFTER", $i); @@ -2850,9 +3140,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { chdir $builddir || die "can't change directory to $builddir"; - if (!-d $tmpdir) { - mkpath($tmpdir) or - die "can't create $tmpdir"; + foreach my $dir ($tmpdir, $outputdir) { + if (!-d $dir) { + mkpath($dir) or + die "can't create $dir"; + } } $ENV{"SSH_USER"} = $ssh_user; @@ -2889,8 +3181,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $run_type = "ERROR"; } + my $installme = ""; + $installme = " no_install" if ($no_install); + doprint "\n\n"; - doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n"; + doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n"; unlink $dmesg; unlink $buildlog; @@ -2911,6 +3206,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { die "failed to checkout $checkout"; } + $no_reboot = 0; + + if ($test_type eq "bisect") { bisect $i; next; @@ -2929,6 +3227,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { build $build_type or next; } + if ($test_type eq "install") { + get_version; + install; + success $i; + next; + } + if ($test_type ne "build") { my $failed = 0; start_monitor_and_boot or $failed = 1; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index b8bcd14..dbedfa1 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,128 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# DEFAULTS OVERRIDE +# +# Options defined in the DEFAULTS section can not be duplicated +# even if they are defined in two different DEFAULT sections. +# This is done to catch mistakes where an option is added but +# the previous option was forgotten about and not commented. +# +# The OVERRIDE keyword can be added to a section to allow this +# section to override other DEFAULT sections values that have +# been defined previously. It will only override options that +# have been defined before its use. Options defined later +# in a non override section will still error. The same option +# can not be defined in the same section even if that section +# is marked OVERRIDE. +# +# +# +# Both TEST_START and DEFAULTS sections can also have the IF keyword +# The value after the IF must evaluate into a 0 or non 0 positive +# integer, and can use the config variables (explained below). +# +# DEFAULTS IF ${IS_X86_32} +# +# The above will process the DEFAULTS section if the config +# variable IS_X86_32 evaluates to a non zero positive integer +# otherwise if it evaluates to zero, it will act the same +# as if the SKIP keyword was used. +# +# The ELSE keyword can be used directly after a section with +# a IF statement. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE +# +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal +# +# +# The ELSE keyword can also contain an IF statement to allow multiple +# if then else sections. But all the sections must be either +# DEFAULT or TEST_START, they can not be a mixture. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE IF ${RUN_DISK_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests +# +# ELSE IF ${RUN_CPU_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu +# +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# The if statement may also have comparisons that will and for +# == and !=, strings may be used for both sides. +# +# BOX_TYPE := x86_32 +# +# DEFAULTS IF ${BOX_TYPE} == x86_32 +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32 +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 +# +# The DEFINED keyword can be used by the IF statements too. +# It returns true if the given config variable or option has been defined +# or false otherwise. +# +# +# DEFAULTS IF DEFINED USE_CC +# CC := ${USE_CC} +# ELSE +# CC := gcc +# +# +# As well as NOT DEFINED. +# +# DEFAULTS IF NOT DEFINED MAKE_CMD +# MAKE_CMD := make ARCH=x86 +# +# +# And/or ops (&&,||) may also be used to make complex conditionals. +# +# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf +# +# Notice the use of paranthesis. Without any paranthesis the above would be +# processed the same as: +# +# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf) +# +# +# +# INCLUDE file +# +# The INCLUDE keyword may be used in DEFAULT sections. This will +# read another config file and process that file as well. The included +# file can include other files, add new test cases or default +# statements. Config variables will be passed to these files and changes +# to config variables will be seen by top level config files. Including +# a file is processed just like the contents of the file was cut and pasted +# into the top level file, except, that include files that end with +# TEST_START sections will have that section ended at the end of +# the include file. That is, an included file is included followed +# by another DEFAULT keyword. +# +# Unlike other files referenced in this config, the file path does not need +# to be absolute. If the file does not start with '/', then the directory +# that the current config file was located in is used. If no config by the +# given name is found there, then the current directory is searched. +# +# INCLUDE myfile +# DEFAULT +# +# is the same as: +# +# INCLUDE myfile +# +# Note, if the include file does not contain a full path, the file is +# searched first by the location of the original include file, and then +# by the location that ktest.pl was executed in. +# #### Config variables #### # @@ -253,9 +375,10 @@ # The default test type (default test) # The test types may be: -# build - only build the kernel, do nothing else -# boot - build and boot the kernel -# test - build, boot and if TEST is set, run the test script +# build - only build the kernel, do nothing else +# install - build and install, but do nothing else (does not reboot) +# boot - build, install, and boot the kernel +# test - build, boot and if TEST is set, run the test script # (If TEST is not set, it defaults back to boot) # bisect - Perform a bisect on the kernel (see BISECT_TYPE below) # patchcheck - Do a test on a series of commits in git (see PATCHCHECK below) @@ -293,6 +416,13 @@ # or on some systems: #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION +# If for some reason you just want to boot the kernel and you do not +# want the test to install anything new. For example, you may just want +# to boot test the same kernel over and over and do not want to go through +# the hassle of installing anything, you can set this option to 1 +# (default 0) +#NO_INSTALL = 1 + # If there is a script that you require to run before the build is done # you can specify it with PRE_BUILD. # @@ -415,6 +545,14 @@ # (default "login:") #SUCCESS_LINE = login: +# To speed up between reboots, defining a line that the +# default kernel produces that represents that the default +# kernel has successfully booted and can be used to pass +# a new test kernel to it. Otherwise ktest.pl will wait till +# SLEEP_TIME to continue. +# (default undefined) +#REBOOT_SUCCESS_LINE = login: + # In case the console constantly fills the screen, having # a specified time to stop the test after success is recommended. # (in seconds) @@ -480,6 +618,8 @@ # another test. If a reboot to the reliable kernel happens, # we wait SLEEP_TIME for the console to stop producing output # before starting the next test. +# +# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE. # (default 60) #SLEEP_TIME = 60 |