diff options
| -rw-r--r-- | arch/arm/mach-orion5x/common.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/db88f5281-setup.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/dns323-setup.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/kurobox_pro-setup.c | 14 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/pci.c | 20 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/rd88f5182-setup.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/ts209-setup.c | 11 |
7 files changed, 54 insertions, 27 deletions
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index f4c4c9a..14adf8d 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -33,10 +33,9 @@ struct pci_sys_data; struct pci_bus; void orion5x_pcie_id(u32 *dev, u32 *rev); -int orion5x_pcie_local_bus_nr(void); -int orion5x_pci_local_bus_nr(void); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); +int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); /* * Valid GPIO pins according to MPP setup, used by machine-setup. diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 872aed3..83e9ad4 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -241,14 +241,17 @@ void __init db88f5281_pci_preinit(void) static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCIE IRQ is connected internally (not GPIO) + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* - * PCI IRQs are connected via GPIOs + * PCI IRQs are connected via GPIOs. */ switch (slot - DB88F5281_PCI_SLOT0_OFFS) { case 0: diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index d67790e..4618173 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -43,11 +43,16 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - /* PCI-E */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + int irq; - pr_err("%s: requested mapping for unknown bus\n", __func__); + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + pr_err("%s: requested mapping for unknown device\n", __func__); return -1; } diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 9141345..36cf763 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -120,13 +120,19 @@ static struct platform_device kurobox_pro_nor_flash = { static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + /* * PCI isn't used on the Kuro */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; - else - printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); + printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); return -1; } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index fdf99fc..9d5d39f 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -41,11 +41,6 @@ void __init orion5x_pcie_id(u32 *dev, u32 *rev) *rev = orion_pcie_rev(PCIE_BASE); } -int __init orion5x_pcie_local_bus_nr(void) -{ - return orion_pcie_get_local_bus_nr(PCIE_BASE); -} - static int pcie_valid_config(int bus, int dev) { /* @@ -269,7 +264,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) */ static DEFINE_SPINLOCK(orion5x_pci_lock); -int orion5x_pci_local_bus_nr(void) +static int orion5x_pci_local_bus_nr(void) { u32 conf = orion5x_read(PCI_P2P_CONF); return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); @@ -557,3 +552,16 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys return bus; } + +int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int bus = dev->bus->number; + + /* + * PCIe endpoint? + */ + if (bus < orion5x_pci_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + return -1; +} diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 37e8b2d..b4315df 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -172,11 +172,14 @@ void __init rd88f5182_pci_preinit(void) static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCI-E isn't used on the RD2 + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* * PCI IRQs are connected via GPIOs diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index fd43863..d3a8922 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -141,14 +141,17 @@ void __init qnap_ts209_pci_preinit(void) static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + int irq; + /* - * PCIE IRQ is connected internally (not GPIO) + * Check for devices with hard-wired IRQs. */ - if (dev->bus->number == orion5x_pcie_local_bus_nr()) - return IRQ_ORION5X_PCIE0_INT; + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; /* - * PCI IRQs are connected via GPIOs + * PCI IRQs are connected via GPIOs. */ switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { case 0: |