summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/powerpc/booting-without-of.txt56
-rw-r--r--arch/powerpc/boot/serial.c3
-rw-r--r--arch/powerpc/platforms/40x/virtex.c12
-rw-r--r--arch/powerpc/sysdev/xilinx_intc.c8
-rw-r--r--drivers/serial/uartlite.c6
5 files changed, 56 insertions, 29 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ee0209a..a9e2d5e 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2292,7 +2292,7 @@ platforms are moved over to use the flattened-device-tree model.
properties of the device node. In general, device nodes for IP-cores
will take the following form:
- (name)@(base-address) {
+ (name): (generic-name)@(base-address) {
compatible = "xlnx,(ip-core-name)-(HW_VER)"
[, (list of compatible devices), ...];
reg = <(baseaddr) (size)>;
@@ -2302,6 +2302,9 @@ platforms are moved over to use the flattened-device-tree model.
xlnx,(parameter2) = <(int-value)>;
};
+ (generic-name): an open firmware-style name that describes the
+ generic class of device. Preferably, this is one word, such
+ as 'serial' or 'ethernet'.
(ip-core-name): the name of the ip block (given after the BEGIN
directive in system.mhs). Should be in lowercase
and all underscores '_' converted to dashes '-'.
@@ -2310,9 +2313,9 @@ platforms are moved over to use the flattened-device-tree model.
dropped from the parameter name, the name is converted
to lowercase and all underscore '_' characters are
converted to dashes '-'.
- (baseaddr): the C_BASEADDR parameter.
+ (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
(HW_VER): from the HW_VER parameter.
- (size): equals C_HIGHADDR - C_BASEADDR + 1
+ (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
Typically, the compatible list will include the exact IP core version
followed by an older IP core version which implements the same
@@ -2342,11 +2345,11 @@ platforms are moved over to use the flattened-device-tree model.
becomes the following device tree node:
- opb-uartlite-0@ec100000 {
+ opb_uartlite_0: serial@ec100000 {
device_type = "serial";
compatible = "xlnx,opb-uartlite-1.00.b";
reg = <ec100000 10000>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <1 0>; // got this from the opb_intc parameters
current-speed = <d#115200>; // standard serial device prop
clock-frequency = <d#50000000>; // standard serial device prop
@@ -2355,16 +2358,19 @@ platforms are moved over to use the flattened-device-tree model.
xlnx,use-parity = <0>;
};
- Some IP cores actually implement 2 or more logical devices. In this case,
- the device should still describe the whole IP core with a single node
- and add a child node for each logical device. The ranges property can
- be used to translate from parent IP-core to the registers of each device.
- (Note: this makes the assumption that both logical devices have the same
- bus binding. If this is not true, then separate nodes should be used for
- each logical device). The 'cell-index' property can be used to enumerate
- logical devices within an IP core. For example, the following is the
- system.mhs entry for the dual ps2 controller found on the ml403 reference
- design.
+ Some IP cores actually implement 2 or more logical devices. In
+ this case, the device should still describe the whole IP core with
+ a single node and add a child node for each logical device. The
+ ranges property can be used to translate from parent IP-core to the
+ registers of each device. In addition, the parent node should be
+ compatible with the bus type 'xlnx,compound', and should contain
+ #address-cells and #size-cells, as with any other bus. (Note: this
+ makes the assumption that both logical devices have the same bus
+ binding. If this is not true, then separate nodes should be used
+ for each logical device). The 'cell-index' property can be used to
+ enumerate logical devices within an IP core. For example, the
+ following is the system.mhs entry for the dual ps2 controller found
+ on the ml403 reference design.
BEGIN opb_ps2_dual_ref
PARAMETER INSTANCE = opb_ps2_dual_ref_0
@@ -2386,21 +2392,24 @@ platforms are moved over to use the flattened-device-tree model.
It would result in the following device tree nodes:
- opb_ps2_dual_ref_0@a9000000 {
+ opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
ranges = <0 a9000000 2000>;
// If this device had extra parameters, then they would
// go here.
ps2@0 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <0 40>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
ps2@1000 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <1000 40>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
@@ -2463,17 +2472,18 @@ platforms are moved over to use the flattened-device-tree model.
Gives this device tree (some properties removed for clarity):
- plb-v34-0 {
+ plb@0 {
#address-cells = <1>;
#size-cells = <1>;
+ compatible = "xlnx,plb-v34-1.02.a";
device_type = "ibm,plb";
ranges; // 1:1 translation
- plb-bram-if-cntrl-0@ffff0000 {
+ plb_bram_if_cntrl_0: bram@ffff0000 {
reg = <ffff0000 10000>;
}
- opb-v20-0 {
+ opb@20000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <20000000 20000000 20000000
@@ -2481,11 +2491,11 @@ platforms are moved over to use the flattened-device-tree model.
80000000 80000000 40000000
c0000000 c0000000 20000000>;
- opb-uart16550-0@a0000000 {
+ opb_uart16550_0: serial@a0000000 {
reg = <a00000000 2000>;
};
- opb-intc-0@d1000fc0 {
+ opb_intc_0: interrupt-controller@d1000fc0 {
reg = <d1000fc0 20>;
};
};
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index cafeece..b6c68ef 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -128,7 +128,8 @@ int serial_console_init(void)
rc = cpm_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "mpc5200-psc-uart"))
rc = mpc5200_psc_console_init(devp, &serial_cd);
- else if (dt_is_compatible(devp, "xilinx,uartlite"))
+ else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
+ dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
rc = uartlite_console_init(devp, &serial_cd);
/* Add other serial console driver calls here */
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 43fcc8e..88b6644 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -15,9 +15,19 @@
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+ { .compatible = "xlnx,plb-v46-1.00.a", },
+ { .compatible = "xlnx,plb-v34-1.01.a", },
+ { .compatible = "xlnx,plb-v34-1.02.a", },
+ { .compatible = "xlnx,opb-v20-1.10.c", },
+ { .compatible = "xlnx,dcr-v29-1.00.a", },
+ { .compatible = "xlnx,compound", },
+ {}
+};
+
static int __init virtex_device_probe(void)
{
- of_platform_bus_probe(NULL, NULL, NULL);
+ of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
return 0;
}
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index c2f17cc..ba8eea2 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -135,10 +135,16 @@ void __init xilinx_intc_init_tree(void)
struct device_node *np;
/* find top level interrupt controller */
- for_each_compatible_node(np, NULL, "xilinx,intc") {
+ for_each_compatible_node(np, NULL, "xlnx,opb-intc-1.00.c") {
if (!of_get_property(np, "interrupts", NULL))
break;
}
+ if (!np) {
+ for_each_compatible_node(np, NULL, "xlnx,xps-intc-1.00.a") {
+ if (!of_get_property(np, "interrupts", NULL))
+ break;
+ }
+ }
/* xilinx interrupt controller needs to be top level */
BUG_ON(!np);
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 3f59324..8094340 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -539,7 +539,7 @@ static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
*
* @dev: pointer to device structure
*/
-static int __devinit ulite_release(struct device *dev)
+static int __devexit ulite_release(struct device *dev)
{
struct uart_port *port = dev_get_drvdata(dev);
int rc = 0;
@@ -572,14 +572,14 @@ static int __devinit ulite_probe(struct platform_device *pdev)
return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start);
}
-static int ulite_remove(struct platform_device *pdev)
+static int __devexit ulite_remove(struct platform_device *pdev)
{
return ulite_release(&pdev->dev);
}
static struct platform_driver ulite_platform_driver = {
.probe = ulite_probe,
- .remove = ulite_remove,
+ .remove = __devexit_p(ulite_remove),
.driver = {
.owner = THIS_MODULE,
.name = "uartlite",
generated by cgit v0.10.2 at 2024-11-10 11:49:44 (GMT)