diff options
201 files changed, 7075 insertions, 2581 deletions
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index fc9ce6f..6d21c02 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -54,8 +54,13 @@ PROPERTIES - compatible Usage: required Value type: <string> - Definition: Must include "fsl,sec-v4.0". Also includes SEC - ERA versions (optional) with which the device is compatible. + Definition: Must include "fsl,sec-v4.0" + + - fsl,sec-era + Usage: optional + Value type: <u32> + Definition: A standard property. Define the 'ERA' of the SEC + device. - #address-cells Usage: required @@ -107,7 +112,8 @@ PROPERTIES EXAMPLE crypto@300000 { - compatible = "fsl,sec-v4.0", "fsl,sec-era-v2.0"; + compatible = "fsl,sec-v4.0"; + fsl,sec-era = <0x2>; #address-cells = <1>; #size-cells = <1>; reg = <0x300000 0x10000>; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt index 9e7a241..7f150b5 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt @@ -17,9 +17,20 @@ Recommended properties: contains a functioning "reset control register" (i.e. the board is wired to reset upon setting the HRESET_REQ bit in this register). -Example: + - fsl,liodn-bits : Indicates the number of defined bits in the LIODN + registers, for those SOCs that have a PAMU device. + +Examples: global-utilities@e0000 { /* global utilities block */ compatible = "fsl,mpc8548-guts"; reg = <e0000 1000>; fsl,has-rstcr; }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt new file mode 100644 index 0000000..1f5e329 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt @@ -0,0 +1,140 @@ +Freescale Peripheral Management Access Unit (PAMU) Device Tree Binding + +DESCRIPTION + +The PAMU is an I/O MMU that provides device-to-memory access control and +address translation capabilities. + +Required properties: + +- compatible : <string> + First entry is a version-specific string, such as + "fsl,pamu-v1.0". The second is "fsl,pamu". +- ranges : <prop-encoded-array> + A standard property. Utilized to describe the memory mapped + I/O space utilized by the controller. The size should + be set to the total size of the register space of all + physically present PAMU controllers. For example, for + PAMU v1.0, on an SOC that has five PAMU devices, the size + is 0x5000. +- interrupts : <prop-encoded-array> + Interrupt mappings. The first tuple is the normal PAMU + interrupt, used for reporting access violations. The second + is for PAMU hardware errors, such as PAMU operation errors + and ECC errors. +- #address-cells: <u32> + A standard property. +- #size-cells : <u32> + A standard property. + +Optional properties: +- reg : <prop-encoded-array> + A standard property. It represents the CCSR registers of + all child PAMUs combined. Include it to provide support + for legacy drivers. +- interrupt-parent : <phandle> + Phandle to interrupt controller + +Child nodes: + +Each child node represents one PAMU controller. Each SOC device that is +connected to a specific PAMU device should have a "fsl,pamu-phandle" property +that links to the corresponding specific child PAMU controller. + +- reg : <prop-encoded-array> + A standard property. Specifies the physical address and + length (relative to the parent 'ranges' property) of this + PAMU controller's configuration registers. The size should + be set to the size of this PAMU controllers's register space. + For PAMU v1.0, this size is 0x1000. +- fsl,primary-cache-geometry + : <prop-encoded-array> + Two cells that specify the geometry of the primary PAMU + cache. The first is the number of cache lines, and the + second is the number of "ways". For direct-mapped caches, + specify a value of 1. +- fsl,secondary-cache-geometry + : <prop-encoded-array> + Two cells that specify the geometry of the secondary PAMU + cache. The first is the number of cache lines, and the + second is the number of "ways". For direct-mapped caches, + specify a value of 1. + +Device nodes: + +Devices that have LIODNs need to specify links to the parent PAMU controller +(the actual PAMU controller that this device is connected to) and a pointer to +the LIODN register, if applicable. + +- fsl,iommu-parent + : <phandle> + Phandle to the single, specific PAMU controller node to which + this device is connect. The PAMU topology is represented in + the device tree to assist code that dynamically determines the + best LIODN values to minimize PAMU cache thrashing. + +- fsl,liodn-reg : <prop-encoded-array> + Two cells that specify the location of the LIODN register + for this device. Required for devices that have a single + LIODN. The first cell is a phandle to a node that contains + the registers where the LIODN is to be set. The second is + the offset from the first "reg" resource of the node where + the specific LIODN register is located. + + +Example: + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; diff --git a/Documentation/powerpc/cpu_features.txt b/Documentation/powerpc/cpu_features.txt index ffa4183..ae09df8 100644 --- a/Documentation/powerpc/cpu_features.txt +++ b/Documentation/powerpc/cpu_features.txt @@ -11,10 +11,10 @@ split instruction and data caches, and if the CPU supports the DOZE and NAP sleep modes. Detection of the feature set is simple. A list of processors can be found in -arch/ppc/kernel/cputable.c. The PVR register is masked and compared with each -value in the list. If a match is found, the cpu_features of cur_cpu_spec is -assigned to the feature bitmask for this processor and a __setup_cpu function -is called. +arch/powerpc/kernel/cputable.c. The PVR register is masked and compared with +each value in the list. If a match is found, the cpu_features of cur_cpu_spec +is assigned to the feature bitmask for this processor and a __setup_cpu +function is called. C code may test 'cur_cpu_spec[smp_processor_id()]->cpu_features' for a particular feature bit. This is done in quite a few places, for example @@ -51,6 +51,6 @@ should be used in the majority of cases. The END_FTR_SECTION macros are implemented by storing information about this code in the '__ftr_fixup' ELF section. When do_cpu_ftr_fixups -(arch/ppc/kernel/misc.S) is invoked, it will iterate over the records in +(arch/powerpc/kernel/misc.S) is invoked, it will iterate over the records in __ftr_fixup, and if the required feature is not present it will loop writing nop's from each BEGIN_FTR_SECTION to END_FTR_SECTION. diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt new file mode 100644 index 0000000..c907be4 --- /dev/null +++ b/Documentation/powerpc/transactional_memory.txt @@ -0,0 +1,175 @@ +Transactional Memory support +============================ + +POWER kernel support for this feature is currently limited to supporting +its use by user programs. It is not currently used by the kernel itself. + +This file aims to sum up how it is supported by Linux and what behaviour you +can expect from your user programs. + + +Basic overview +============== + +Hardware Transactional Memory is supported on POWER8 processors, and is a +feature that enables a different form of atomic memory access. Several new +instructions are presented to delimit transactions; transactions are +guaranteed to either complete atomically or roll back and undo any partial +changes. + +A simple transaction looks like this: + +begin_move_money: + tbegin + beq abort_handler + + ld r4, SAVINGS_ACCT(r3) + ld r5, CURRENT_ACCT(r3) + subi r5, r5, 1 + addi r4, r4, 1 + std r4, SAVINGS_ACCT(r3) + std r5, CURRENT_ACCT(r3) + + tend + + b continue + +abort_handler: + ... test for odd failures ... + + /* Retry the transaction if it failed because it conflicted with + * someone else: */ + b begin_move_money + + +The 'tbegin' instruction denotes the start point, and 'tend' the end point. +Between these points the processor is in 'Transactional' state; any memory +references will complete in one go if there are no conflicts with other +transactional or non-transactional accesses within the system. In this +example, the transaction completes as though it were normal straight-line code +IF no other processor has touched SAVINGS_ACCT(r3) or CURRENT_ACCT(r3); an +atomic move of money from the current account to the savings account has been +performed. Even though the normal ld/std instructions are used (note no +lwarx/stwcx), either *both* SAVINGS_ACCT(r3) and CURRENT_ACCT(r3) will be +updated, or neither will be updated. + +If, in the meantime, there is a conflict with the locations accessed by the +transaction, the transaction will be aborted by the CPU. Register and memory +state will roll back to that at the 'tbegin', and control will continue from +'tbegin+4'. The branch to abort_handler will be taken this second time; the +abort handler can check the cause of the failure, and retry. + +Checkpointed registers include all GPRs, FPRs, VRs/VSRs, LR, CCR/CR, CTR, FPCSR +and a few other status/flag regs; see the ISA for details. + +Causes of transaction aborts +============================ + +- Conflicts with cache lines used by other processors +- Signals +- Context switches +- See the ISA for full documentation of everything that will abort transactions. + + +Syscalls +======== + +Performing syscalls from within transaction is not recommended, and can lead +to unpredictable results. + +Syscalls do not by design abort transactions, but beware: The kernel code will +not be running in transactional state. The effect of syscalls will always +remain visible, but depending on the call they may abort your transaction as a +side-effect, read soon-to-be-aborted transactional data that should not remain +invisible, etc. If you constantly retry a transaction that constantly aborts +itself by calling a syscall, you'll have a livelock & make no progress. + +Simple syscalls (e.g. sigprocmask()) "could" be OK. Even things like write() +from, say, printf() should be OK as long as the kernel does not access any +memory that was accessed transactionally. + +Consider any syscalls that happen to work as debug-only -- not recommended for +production use. Best to queue them up till after the transaction is over. + + +Signals +======= + +Delivery of signals (both sync and async) during transactions provides a second +thread state (ucontext/mcontext) to represent the second transactional register +state. Signal delivery 'treclaim's to capture both register states, so signals +abort transactions. The usual ucontext_t passed to the signal handler +represents the checkpointed/original register state; the signal appears to have +arisen at 'tbegin+4'. + +If the sighandler ucontext has uc_link set, a second ucontext has been +delivered. For future compatibility the MSR.TS field should be checked to +determine the transactional state -- if so, the second ucontext in uc->uc_link +represents the active transactional registers at the point of the signal. + +For 64-bit processes, uc->uc_mcontext.regs->msr is a full 64-bit MSR and its TS +field shows the transactional mode. + +For 32-bit processes, the mcontext's MSR register is only 32 bits; the top 32 +bits are stored in the MSR of the second ucontext, i.e. in +uc->uc_link->uc_mcontext.regs->msr. The top word contains the transactional +state TS. + +However, basic signal handlers don't need to be aware of transactions +and simply returning from the handler will deal with things correctly: + +Transaction-aware signal handlers can read the transactional register state +from the second ucontext. This will be necessary for crash handlers to +determine, for example, the address of the instruction causing the SIGSEGV. + +Example signal handler: + + void crash_handler(int sig, siginfo_t *si, void *uc) + { + ucontext_t *ucp = uc; + ucontext_t *transactional_ucp = ucp->uc_link; + + if (ucp_link) { + u64 msr = ucp->uc_mcontext.regs->msr; + /* May have transactional ucontext! */ +#ifndef __powerpc64__ + msr |= ((u64)transactional_ucp->uc_mcontext.regs->msr) << 32; +#endif + if (MSR_TM_ACTIVE(msr)) { + /* Yes, we crashed during a transaction. Oops. */ + fprintf(stderr, "Transaction to be restarted at 0x%llx, but " + "crashy instruction was at 0x%llx\n", + ucp->uc_mcontext.regs->nip, + transactional_ucp->uc_mcontext.regs->nip); + } + } + + fix_the_problem(ucp->dar); + } + + +Failure cause codes used by kernel +================================== + +These are defined in <asm/reg.h>, and distinguish different reasons why the +kernel aborted a transaction: + + TM_CAUSE_RESCHED Thread was rescheduled. + TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. + TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort + transactions for consistency will use this. + TM_CAUSE_SIGNAL Signal delivered. + TM_CAUSE_MISC Currently unused. + +These can be checked by the user program's abort handler as TEXASR[0:7]. + + +GDB +=== + +GDB and ptrace are not currently TM-aware. If one stops during a transaction, +it looks like the transaction has just started (the checkpointed state is +presented). The transaction cannot then be continued and will take the failure +handler route. Furthermore, the transactional 2nd register state will be +inaccessible. GDB can currently be used on programs using TM, but not sensibly +in parts within transactions. diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e7fb8ed..a5255f2 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -142,6 +142,7 @@ config PPC select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA select CLONE_BACKWARDS + select ARCH_USE_BUILTIN_BSWAP config EARLY_PRINTK bool @@ -273,6 +274,10 @@ config PPC_ADV_DEBUG_DAC_RANGE depends on PPC_ADV_DEBUG_REGS && 44x default y +config PPC_EMULATE_SSTEP + bool + default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -306,6 +311,14 @@ config MATH_EMULATION unit, which will allow programs that use floating-point instructions to run. +config PPC_TRANSACTIONAL_MEM + bool "Transactional Memory support for POWERPC" + depends on PPC_BOOK3S_64 + depends on SMP + default n + ---help--- + Support user-mode Transactional Memory on POWERPC. + config 8XX_MINIMAL_FPEMU bool "Minimal math emulation for 8xx" depends on 8xx && !MATH_EMULATION diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index b639852..967fd23 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -67,7 +67,25 @@ LDFLAGS_vmlinux-y := -Bstatic LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y) -CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc +ifeq ($(CONFIG_PPC64),y) +ifeq ($(call cc-option-yn,-mcmodel=medium),y) + # -mcmodel=medium breaks modules because it uses 32bit offsets from + # the TOC pointer to create pointers where possible. Pointers into the + # percpu data area are created by this method. + # + # The kernel module loader relocates the percpu data section from the + # original location (starting with 0xd...) to somewhere in the base + # kernel percpu data space (starting with 0xc...). We need a full + # 64bit relocation for this to work, hence -mcmodel=large. + KBUILD_CFLAGS_MODULE += -mcmodel=large +else + export NO_MINIMAL_TOC := -mno-minimal-toc +endif +endif + +CFLAGS-$(CONFIG_PPC64) := -mtraceback=no -mcall-aixdesc +CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc) +CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions) CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4) @@ -136,6 +154,7 @@ head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o head-$(CONFIG_ALTIVEC) += arch/powerpc/kernel/vector.o +head-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += arch/powerpc/kernel/prom_init.o core-y += arch/powerpc/kernel/ \ arch/powerpc/mm/ \ @@ -143,6 +162,7 @@ core-y += arch/powerpc/kernel/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ \ arch/powerpc/math-emu/ \ + arch/powerpc/crypto/ \ arch/powerpc/net/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_KVM) += arch/powerpc/kvm/ diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts index 877a28c..bf81b8f 100644 --- a/arch/powerpc/boot/dts/a3m071.dts +++ b/arch/powerpc/boot/dts/a3m071.dts @@ -17,6 +17,8 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; + / { model = "anonymous,a3m071"; compatible = "anonymous,a3m071"; @@ -30,10 +32,6 @@ bus-frequency = <0>; /* From boot loader */ system-frequency = <0>; /* From boot loader */ - timer@600 { - fsl,has-wdt; - }; - spi@f00 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts index fabe7b7..1f02034 100644 --- a/arch/powerpc/boot/dts/a4m072.dts +++ b/arch/powerpc/boot/dts/a4m072.dts @@ -15,6 +15,11 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; + / { model = "anonymous,a4m072"; compatible = "anonymous,a4m072"; @@ -34,28 +39,6 @@ fsl,init-fd-counters = <0x3333>; }; - timer@600 { - fsl,has-wdt; - }; - - gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - spi@f00 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts index 9d4917a..7daaca3 100644 --- a/arch/powerpc/boot/dts/bluestone.dts +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -107,6 +107,14 @@ interrupt-parent = <&UIC0>; }; + OCM: ocm@400040000 { + compatible = "ibm,ocm"; + status = "ok"; + cell-index = <1>; + /* configured in U-Boot */ + reg = <4 0x00040000 0x8000>; /* 32K */ + }; + SDR0: sdr { compatible = "ibm,sdr-apm821xx"; dcr-reg = <0x00e 0x002>; diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi index 638adda..9e6c013 100644 --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi @@ -126,7 +126,7 @@ }; }; - sdhci@2e000 { + sdhc@2e000 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index ad3a4f4..fb580dd 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -12,15 +12,13 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; + / { model = "schindler,cm5200"; compatible = "schindler,cm5200"; soc5200@f0000000 { - timer@600 { // General Purpose Timer - fsl,has-wdt; - }; - can@900 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index a7511f2..955bff6 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -13,6 +13,9 @@ /include/ "mpc5200b.dtsi" +&gpt0 { gpio-controller; fsl,has-wdt; }; +&gpt1 { gpio-controller; }; + / { model = "intercontrol,digsy-mtc"; compatible = "intercontrol,digsy-mtc"; @@ -22,17 +25,6 @@ }; soc5200@f0000000 { - timer@600 { // General Purpose Timer - #gpio-cells = <2>; - fsl,has-wdt; - gpio-controller; - }; - - timer@610 { - #gpio-cells = <2>; - gpio-controller; - }; - rtc@800 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index 0bde9ee..af12ead 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -41,7 +41,7 @@ /* controller at 0x9000 */ &pci0 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; @@ -69,7 +69,7 @@ /* controller at 0xa000 */ &pci1 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index 06216b8..e179803 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -45,7 +45,7 @@ /* controller at 0x9000 */ &pci0 { - compatible = "fsl,p1022-pcie"; + compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; @@ -73,7 +73,7 @@ /* controller at 0xa000 */ &pci1 { - compatible = "fsl,p1022-pcie"; + compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; @@ -102,7 +102,7 @@ /* controller at 0xb000 */ &pci2 { - compatible = "fsl,p1022-pcie"; + compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 531eab8..69ac1ac 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -48,6 +48,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +77,8 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +106,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -125,18 +131,21 @@ interrupts = <16 2 1 11>; #address-cells = <2>; #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -246,10 +255,37 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -291,7 +327,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -299,6 +345,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -308,20 +356,37 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + /include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index af4ebc8..9b5a81a 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -48,6 +48,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +77,8 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +106,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -152,18 +158,21 @@ interrupts = <16 2 1 11>; #address-cells = <2>; #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -273,10 +282,37 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -318,7 +354,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -326,6 +372,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -335,20 +383,37 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + /include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 4f9c9f6..19859ad 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -41,13 +41,15 @@ /* controller at 0x200000 */ &pci0 { - compatible = "fsl,p4080-pcie"; + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -68,13 +70,15 @@ /* controller at 0x201000 */ &pci1 { - compatible = "fsl,p4080-pcie"; + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -95,13 +99,15 @@ /* controller at 0x202000 */ &pci2 { - compatible = "fsl,p4080-pcie"; + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -126,18 +132,21 @@ #address-cells = <2>; #size-cells = <2>; fsl,srio-rmu-handle = <&rmu>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -281,13 +290,51 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-rmu-0.dtsi" + rmu@d3000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */ + }; + /include/ "qoriq-mpic.dtsi" guts: global-utilities@e0000 { @@ -327,7 +374,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -335,6 +392,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ voltage-ranges = <3300 3300>; sdhci,auto-cmd12; }; @@ -347,11 +406,18 @@ /include/ "qoriq-usb2-mph-0.dtsi" usb@210000 { compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb@211000 { compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ }; /include/ "qoriq-sec4.0-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 5d7205b..9ea77c3 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -48,6 +48,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +77,8 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +106,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -129,6 +135,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 12>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -152,18 +160,21 @@ interrupts = <16 2 1 11>; #address-cells = <2>; #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -276,10 +287,37 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -321,7 +359,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -329,6 +377,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -338,21 +388,41 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; /include/ "qoriq-sec4.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + /include/ "qoriq-raid1.0-0.dtsi" + raideng@320000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index db2c9a7..97f8c26 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -48,6 +48,7 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +76,7 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +104,7 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -239,10 +242,42 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -284,7 +319,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -292,6 +337,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu2>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -301,20 +348,37 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + /include/ "qoriq-sec5.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu4>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi index d4c9d5d..ffadcb5 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -36,6 +36,7 @@ crypto@30000 { compatible = "fsl,sec-v4.4", "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; + ranges = <0x0 0x30000 0x10000>; reg = <0x30000 0x10000>; interrupts = <58 2 0 0>; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index fb288bb..5abb46c 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -12,19 +12,34 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; + / { model = "fsl,lite5200b"; compatible = "fsl,lite5200b"; + leds { + compatible = "gpio-leds"; + tmr2 { + gpios = <&gpt2 0 1>; + }; + tmr3 { + gpios = <&gpt3 0 1>; + linux,default-trigger = "heartbeat"; + }; + led1 { gpios = <&gpio_wkup 2 1>; }; + led2 { gpios = <&gpio_simple 3 1>; }; + led3 { gpios = <&gpio_wkup 3 1>; }; + led4 { gpios = <&gpio_simple 2 1>; }; + }; + memory { reg = <0x00000000 0x10000000>; // 256MB }; soc5200@f0000000 { - timer@600 { // General Purpose Timer - fsl,has-wdt; - }; - psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; cell-index = <0>; diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index 48d72f3..b5413cb 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -13,6 +13,8 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; + / { model = "fsl,media5200"; compatible = "fsl,media5200"; @@ -41,10 +43,6 @@ soc5200@f0000000 { bus-frequency = <132000000>;// 132 MHz - timer@600 { // General Purpose Timer - fsl,has-wdt; - }; - psc@2000 { // PSC1 status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 0b78e89..bbabd97 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -12,26 +12,22 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; +&gpt6 { // Motion-PRO status LED + compatible = "promess,motionpro-led"; + label = "motionpro-statusled"; + blink-delay = <100>; // 100 msec +}; +&gpt7 { // Motion-PRO ready LED + compatible = "promess,motionpro-led"; + label = "motionpro-readyled"; +}; + / { model = "promess,motionpro"; compatible = "promess,motionpro"; soc5200@f0000000 { - timer@600 { // General Purpose Timer - fsl,has-wdt; - }; - - timer@660 { // Motion-PRO status LED - compatible = "promess,motionpro-led"; - label = "motionpro-statusled"; - blink-delay = <100>; // 100 msec - }; - - timer@670 { // Motion-PRO ready LED - compatible = "promess,motionpro-led"; - label = "motionpro-readyled"; - }; - can@900 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi new file mode 100644 index 0000000..723e292 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -0,0 +1,410 @@ +/* + * base MPC5121 Device Tree Source + * + * Copyright 2007-2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "mpc5121"; + compatible = "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + ethernet0 = ð0; + pci = &pci; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5121@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; /* 32 bytes */ + i-cache-line-size = <0x20>; /* 32 bytes */ + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */ + bus-frequency = <198000000>; /* 198 MHz csb bus */ + clock-frequency = <396000000>; /* 396 MHz ppc core */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256MB at 0 */ + }; + + mbx@20000000 { + compatible = "fsl,mpc5121-mbx"; + reg = <0x20000000 0x4000>; + interrupts = <66 0x8>; + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x20000>; /* 128K at 0x30000000 */ + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; /* 1M at 0x40000000 */ + interrupts = <6 8>; + #address-cells = <1>; + #size-cells = <1>; + }; + + localbus@80000020 { + compatible = "fsl,mpc5121-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x80000020 0x40>; + interrupts = <7 0x8>; + ranges = <0x0 0x0 0xfc000000 0x04000000>; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; /* 66 MHz ips bus */ + + + /* + * IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + /* Watchdog timer */ + wdt@900 { + compatible = "fsl,mpc5121-wdt"; + reg = <0x900 0x100>; + }; + + /* Real time clock */ + rtc@a00 { + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + /* Reset module */ + reset@e00 { + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + + /* Clock control */ + clock@f00 { + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + /* Power Management Controller */ + pmc@1000{ + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x8>; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + }; + + can@1300 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x1300 0x80>; + interrupts = <12 0x8>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x1380 0x80>; + interrupts = <13 0x8>; + }; + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + reg = <0x1500 0x100>; + interrupts = <8 0x8>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1700 0x20>; + interrupts = <9 0x8>; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1720 0x20>; + interrupts = <10 0x8>; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + }; + + can@2300 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x2300 0x80>; + interrupts = <90 0x8>; + }; + + can@2380 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x2380 0x80>; + interrupts = <91 0x8>; + }; + + viu@2400 { + compatible = "fsl,mpc5121-viu"; + reg = <0x2400 0x400>; + interrupts = <67 0x8>; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + }; + + eth0: ethernet@2800 { + device_type = "network"; + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + }; + + /* USB1 using external ULPI PHY */ + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + /* USB0 using internal UTMI PHY */ + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + }; + + /* IO control */ + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + /* LocalPlus controller */ + lpc@10000 { + compatible = "fsl,mpc5121-lpc"; + reg = <0x10000 0x200>; + }; + + pata@10200 { + compatible = "fsl,mpc5121-pata"; + reg = <0x10200 0x100>; + interrupts = <5 0x8>; + }; + + /* 512x PSCs are not 52xx PSC compatible */ + + /* PSC0 */ + psc@11000 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC1 */ + psc@11100 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC2 */ + psc@11200 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11200 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC3 */ + psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + reg = <0x11300 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC4 */ + psc@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + reg = <0x11400 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC5 */ + psc@11500 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11500 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC6 */ + psc@11600 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11600 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC7 */ + psc@11700 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11700 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC8 */ + psc@11800 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11800 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC9 */ + psc@11900 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC10 */ + psc@11a00 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11a00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + /* PSC11 */ + psc@11b00 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11b00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; + + pci: pci@80008500 { + compatible = "fsl,mpc5121-pci"; + device_type = "pci"; + interrupts = <1 0x8>; + clock-frequency = <0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + reg = <0x80008500 0x100 /* internal registers */ + 0x80008300 0x8>; /* config space access registers */ + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index c9ef6bb..f269b13 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -1,7 +1,7 @@ /* * MPC5121E ADS Device Tree Source * - * Copyright 2007,2008 Freescale Semiconductor Inc. + * Copyright 2007-2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,74 +9,26 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5121.dtsi" / { model = "mpc5121ads"; compatible = "fsl,mpc5121ads"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - pci = &pci; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5121@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <0x20>; // 32 bytes - i-cache-line-size = <0x20>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <49500000>;// 49.5 MHz (csb/4) - bus-frequency = <198000000>; // 198 MHz csb bus - clock-frequency = <396000000>; // 396 MHz ppc core - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; // 256MB at 0 - }; - - mbx@20000000 { - compatible = "fsl,mpc5121-mbx"; - reg = <0x20000000 0x4000>; - interrupts = <66 0x8>; - interrupt-parent = < &ipic >; - }; - - sram@30000000 { - compatible = "fsl,mpc5121-sram"; - reg = <0x30000000 0x20000>; // 128K at 0x30000000 - }; nfc@40000000 { - compatible = "fsl,mpc5121-nfc"; - reg = <0x40000000 0x100000>; // 1M at 0x40000000 - interrupts = <6 8>; - interrupt-parent = < &ipic >; - #address-cells = <1>; - #size-cells = <1>; - // ADS has two Hynix 512MB Nand flash chips in a single - // stacked package. + /* + * ADS has two Hynix 512MB Nand flash chips in a single + * stacked package. + */ chips = <2>; + nand@0 { label = "nand"; - reg = <0x00000000 0x40000000>; // 512MB + 512MB + reg = <0x00000000 0x40000000>; /* 512MB + 512MB */ }; }; localbus@80000020 { - compatible = "fsl,mpc5121-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0x80000020 0x40>; - ranges = <0x0 0x0 0xfc000000 0x04000000 0x2 0x0 0x82000000 0x00008000>; @@ -87,6 +39,7 @@ #size-cells = <1>; bank-width = <4>; device-width = <2>; + protected@0 { label = "protected"; reg = <0x00000000 0x00040000>; // first sector is protected @@ -121,91 +74,18 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x2 0xa 0x5>; - interrupt-parent = < &ipic >; - // irq routing - // all irqs but touch screen are routed to irq0 (ipic 48) - // touch screen is statically routed to irq1 (ipic 17) - // so don't use it here + /* irq routing: + * all irqs but touch screen are routed to irq0 (ipic 48) + * touch screen is statically routed to irq1 (ipic 17) + * so don't use it here + */ interrupts = <48 0x8>; }; }; soc@80000000 { - compatible = "fsl,mpc5121-immr"; - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - ranges = <0x0 0x80000000 0x400000>; - reg = <0x80000000 0x400000>; - bus-frequency = <66000000>; // 66 MHz ips bus - - - // IPIC - // interrupts cell = <intr #, sense> - // sense values match linux IORESOURCE_IRQ_* defines: - // sense == 8: Level, low assertion - // sense == 2: Edge, high-to-low change - // - ipic: interrupt-controller@c00 { - compatible = "fsl,mpc5121-ipic", "fsl,ipic"; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0xc00 0x100>; - }; - - rtc@a00 { // Real time clock - compatible = "fsl,mpc5121-rtc"; - reg = <0xa00 0x100>; - interrupts = <79 0x8 80 0x8>; - interrupt-parent = < &ipic >; - }; - - reset@e00 { // Reset module - compatible = "fsl,mpc5121-reset"; - reg = <0xe00 0x100>; - }; - - clock@f00 { // Clock control - compatible = "fsl,mpc5121-clock"; - reg = <0xf00 0x100>; - }; - - pmc@1000{ //Power Management Controller - compatible = "fsl,mpc5121-pmc"; - reg = <0x1000 0x100>; - interrupts = <83 0x2>; - interrupt-parent = < &ipic >; - }; - - gpio@1100 { - compatible = "fsl,mpc5121-gpio"; - reg = <0x1100 0x100>; - interrupts = <78 0x8>; - interrupt-parent = < &ipic >; - }; - - can@1300 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <12 0x8>; - interrupt-parent = < &ipic >; - reg = <0x1300 0x80>; - }; - - can@1380 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <13 0x8>; - interrupt-parent = < &ipic >; - reg = <0x1380 0x80>; - }; i2c@1700 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - reg = <0x1700 0x20>; - interrupts = <9 0x8>; - interrupt-parent = < &ipic >; fsl,preserve-clocking; hwmon@4a { @@ -224,196 +104,75 @@ }; }; - i2c@1720 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - reg = <0x1720 0x20>; - interrupts = <10 0x8>; - interrupt-parent = < &ipic >; - }; - - i2c@1740 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - reg = <0x1740 0x20>; - interrupts = <11 0x8>; - interrupt-parent = < &ipic >; + eth0: ethernet@2800 { + phy-handle = <&phy0>; }; - i2ccontrol@1760 { - compatible = "fsl,mpc5121-i2c-ctrl"; - reg = <0x1760 0x8>; + can@2300 { + status = "disabled"; }; - axe@2000 { - compatible = "fsl,mpc5121-axe"; - reg = <0x2000 0x100>; - interrupts = <42 0x8>; - interrupt-parent = < &ipic >; + can@2380 { + status = "disabled"; }; - display@2100 { - compatible = "fsl,mpc5121-diu"; - reg = <0x2100 0x100>; - interrupts = <64 0x8>; - interrupt-parent = < &ipic >; + viu@2400 { + status = "disabled"; }; mdio@2800 { - compatible = "fsl,mpc5121-fec-mdio"; - reg = <0x2800 0x800>; - #address-cells = <1>; - #size-cells = <0>; - phy: ethernet-phy@0 { + phy0: ethernet-phy@0 { reg = <1>; - device_type = "ethernet-phy"; }; }; - ethernet@2800 { - device_type = "network"; - compatible = "fsl,mpc5121-fec"; - reg = <0x2800 0x800>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <4 0x8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy >; - fsl,align-tx-packets = <4>; + /* mpc5121ads only uses USB0 */ + usb@3000 { + status = "disabled"; }; - // 5121e has two dr usb modules - // mpc5121_ads only uses USB0 - - // USB1 using external ULPI PHY - //usb@3000 { - // compatible = "fsl,mpc5121-usb2-dr"; - // reg = <0x3000 0x1000>; - // #address-cells = <1>; - // #size-cells = <0>; - // interrupt-parent = < &ipic >; - // interrupts = <43 0x8>; - // dr_mode = "otg"; - // phy_type = "ulpi"; - //}; - - // USB0 using internal UTMI PHY + /* USB0 using internal UTMI PHY */ usb@4000 { - compatible = "fsl,mpc5121-usb2-dr"; - reg = <0x4000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <44 0x8>; - dr_mode = "otg"; - phy_type = "utmi_wide"; + dr_mode = "host"; fsl,invert-drvvbus; fsl,invert-pwr-fault; }; - // IO control - ioctl@a000 { - compatible = "fsl,mpc5121-ioctl"; - reg = <0xA000 0x1000>; - }; - - pata@10200 { - compatible = "fsl,mpc5121-pata"; - reg = <0x10200 0x100>; - interrupts = <5 0x8>; - interrupt-parent = < &ipic >; - }; - - // 512x PSCs are not 52xx PSC compatible - // PSC3 serial port A aka ttyPSC0 - serial@11300 { - device_type = "serial"; + /* PSC3 serial port A aka ttyPSC0 */ + psc@11300 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - // Logical port assignment needed until driver - // learns to use aliases - port-number = <0>; - cell-index = <3>; - reg = <0x11300 0x100>; - interrupts = <40 0x8>; - interrupt-parent = < &ipic >; - rx-fifo-size = <16>; - tx-fifo-size = <16>; }; - // PSC4 serial port B aka ttyPSC1 - serial@11400 { - device_type = "serial"; + /* PSC4 serial port B aka ttyPSC1 */ + psc@11400 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - // Logical port assignment needed until driver - // learns to use aliases - port-number = <1>; - cell-index = <4>; - reg = <0x11400 0x100>; - interrupts = <40 0x8>; - interrupt-parent = < &ipic >; - rx-fifo-size = <16>; - tx-fifo-size = <16>; }; - // PSC5 in ac97 mode - ac97@11500 { + /* PSC5 in ac97 mode */ + ac97: psc@11500 { compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; - cell-index = <5>; - reg = <0x11500 0x100>; - interrupts = <40 0x8>; - interrupt-parent = < &ipic >; fsl,mode = "ac97-slave"; - rx-fifo-size = <384>; - tx-fifo-size = <384>; - }; - - pscfifo@11f00 { - compatible = "fsl,mpc5121-psc-fifo"; - reg = <0x11f00 0x100>; - interrupts = <40 0x8>; - interrupt-parent = < &ipic >; + fsl,rx-fifo-size = <384>; + fsl,tx-fifo-size = <384>; }; - - dma@14000 { - compatible = "fsl,mpc5121-dma"; - reg = <0x14000 0x1800>; - interrupts = <65 0x8>; - interrupt-parent = < &ipic >; - }; - }; pci: pci@80008500 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < - // IDSEL 0x15 - Slot 1 PCI + /* IDSEL 0x15 - Slot 1 PCI */ 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 - // IDSEL 0x16 - Slot 2 MiniPCI + /* IDSEL 0x16 - Slot 2 MiniPCI */ 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 - // IDSEL 0x17 - Slot 3 MiniPCI + /* IDSEL 0x17 - Slot 3 MiniPCI */ 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 >; - interrupt-parent = < &ipic >; - interrupts = <1 0x8>; - bus-range = <0 0>; - ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0x80008500 0x100 /* internal registers */ - 0x80008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc5121-pci"; - device_type = "pci"; }; }; diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi index 39ed65a..969b220 100644 --- a/arch/powerpc/boot/dts/mpc5200b.dtsi +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi @@ -64,50 +64,59 @@ reg = <0x500 0x80>; }; - timer@600 { // General Purpose Timer + gpt0: timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x600 0x10>; interrupts = <1 9 0>; + // add 'fsl,has-wdt' to enable watchdog }; - timer@610 { // General Purpose Timer + gpt1: timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x610 0x10>; interrupts = <1 10 0>; }; - timer@620 { // General Purpose Timer + gpt2: timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x620 0x10>; interrupts = <1 11 0>; }; - timer@630 { // General Purpose Timer + gpt3: timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x630 0x10>; interrupts = <1 12 0>; }; - timer@640 { // General Purpose Timer + gpt4: timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x640 0x10>; interrupts = <1 13 0>; }; - timer@650 { // General Purpose Timer + gpt5: timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x650 0x10>; interrupts = <1 14 0>; }; - timer@660 { // General Purpose Timer + gpt6: timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x660 0x10>; interrupts = <1 15 0>; }; - timer@670 { // General Purpose Timer + gpt7: timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode reg = <0x670 0x10>; interrupts = <1 16 0>; }; diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts index 21d3472..d3a792b 100644 --- a/arch/powerpc/boot/dts/mucmc52.dts +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -13,47 +13,23 @@ /include/ "mpc5200b.dtsi" +/* Timer pins that need to be in GPIO mode */ +&gpt0 { gpio-controller; }; +&gpt1 { gpio-controller; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; + +/* Disabled timers */ +&gpt4 { status = "disabled"; }; +&gpt5 { status = "disabled"; }; +&gpt6 { status = "disabled"; }; +&gpt7 { status = "disabled"; }; + / { model = "manroland,mucmc52"; compatible = "manroland,mucmc52"; soc5200@f0000000 { - gpt0: timer@600 { // GPT 0 in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt1: timer@610 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt2: timer@620 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt3: timer@630 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - timer@640 { - status = "disabled"; - }; - - timer@650 { - status = "disabled"; - }; - - timer@660 { - status = "disabled"; - }; - - timer@670 { - status = "disabled"; - }; - rtc@800 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi index 24f6680..cf073e6 100644 --- a/arch/powerpc/boot/dts/o2d.dtsi +++ b/arch/powerpc/boot/dts/o2d.dtsi @@ -12,6 +12,13 @@ /include/ "mpc5200b.dtsi" +&gpt0 { + gpio-controller; + fsl,has-wdt; + fsl,wdt-on-boot = <0>; +}; +&gpt1 { gpio-controller; }; + / { model = "ifm,o2d"; compatible = "ifm,o2d"; @@ -22,24 +29,6 @@ soc5200@f0000000 { - gpio_simple: gpio@b00 { - }; - - timer@600 { // General Purpose Timer - #gpio-cells = <2>; - gpio-controller; - fsl,has-wdt; - fsl,wdt-on-boot = <0>; - }; - - timer@610 { - #gpio-cells = <2>; - gpio-controller; - }; - - timer7: timer@670 { - }; - rtc@800 { status = "disabled"; }; @@ -118,7 +107,7 @@ csi@3,0 { compatible = "ifm,o2d-csi"; reg = <3 0 0x00100000>; - ifm,csi-clk-handle = <&timer7>; + ifm,csi-clk-handle = <&gpt7>; gpios = <&gpio_simple 23 0 /* imag_capture */ &gpio_simple 26 0 /* imag_reset */ &gpio_simple 29 0>; /* imag_master_en */ diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 96512c0..192e66a 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -14,51 +14,19 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + / { model = "phytec,pcm030"; compatible = "phytec,pcm030"; soc5200@f0000000 { - timer@600 { // General Purpose Timer - fsl,has-wdt; - }; - - gpt2: timer@620 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt3: timer@630 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt4: timer@640 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt5: timer@650 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt6: timer@660 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt7: timer@670 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - audioplatform: psc@2000 { /* PSC1 in ac97 mode */ compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index 1dd478b..96b139b 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -14,6 +14,14 @@ /include/ "mpc5200b.dtsi" +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + / { model = "phytec,pcm032"; compatible = "phytec,pcm032"; @@ -23,43 +31,6 @@ }; soc5200@f0000000 { - timer@600 { // General Purpose Timer - fsl,has-wdt; - }; - - gpt2: timer@620 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt3: timer@630 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt4: timer@640 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt5: timer@650 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt6: timer@660 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt7: timer@670 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - psc@2000 { /* PSC1 is ac97 */ compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; cell-index = <0>; diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts index 94dfa5c..0b06947 100644 --- a/arch/powerpc/boot/dts/pdm360ng.dts +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -13,7 +13,7 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5121.dtsi" / { model = "pdm360ng"; @@ -22,38 +22,12 @@ #size-cells = <1>; interrupt-parent = <&ipic>; - aliases { - ethernet0 = ð0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5121@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <0x20>; // 32 bytes - i-cache-line-size = <0x20>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <49500000>;// 49.5 MHz (csb/4) - bus-frequency = <198000000>; // 198 MHz csb bus - clock-frequency = <396000000>; // 396 MHz ppc core - }; - }; - memory { device_type = "memory"; reg = <0x00000000 0x20000000>; // 512MB at 0 }; nfc@40000000 { - compatible = "fsl,mpc5121-nfc"; - reg = <0x40000000 0x100000>; - interrupts = <0x6 0x8>; - #address-cells = <0x1>; - #size-cells = <0x1>; bank-width = <0x1>; chips = <0x1>; @@ -63,17 +37,7 @@ }; }; - sram@50000000 { - compatible = "fsl,mpc5121-sram"; - reg = <0x50000000 0x20000>; // 128K at 0x50000000 - }; - localbus@80000020 { - compatible = "fsl,mpc5121-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0x80000020 0x40>; - ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ @@ -129,74 +93,8 @@ }; soc@80000000 { - compatible = "fsl,mpc5121-immr"; - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - ranges = <0x0 0x80000000 0x400000>; - reg = <0x80000000 0x400000>; - bus-frequency = <66000000>; // 66 MHz ips bus - - // IPIC - // interrupts cell = <intr #, sense> - // sense values match linux IORESOURCE_IRQ_* defines: - // sense == 8: Level, low assertion - // sense == 2: Edge, high-to-low change - // - ipic: interrupt-controller@c00 { - compatible = "fsl,mpc5121-ipic", "fsl,ipic"; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0xc00 0x100>; - }; - - rtc@a00 { // Real time clock - compatible = "fsl,mpc5121-rtc"; - reg = <0xa00 0x100>; - interrupts = <79 0x8 80 0x8>; - }; - - reset@e00 { // Reset module - compatible = "fsl,mpc5121-reset"; - reg = <0xe00 0x100>; - }; - - clock@f00 { // Clock control - compatible = "fsl,mpc5121-clock"; - reg = <0xf00 0x100>; - }; - - pmc@1000{ //Power Management Controller - compatible = "fsl,mpc5121-pmc"; - reg = <0x1000 0x100>; - interrupts = <83 0x2>; - }; - - gpio@1100 { - compatible = "fsl,mpc5121-gpio"; - reg = <0x1100 0x100>; - interrupts = <78 0x8>; - }; - - can@1300 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <12 0x8>; - reg = <0x1300 0x80>; - }; - - can@1380 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <13 0x8>; - reg = <0x1380 0x80>; - }; i2c@1700 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c"; - reg = <0x1700 0x20>; - interrupts = <0x9 0x8>; fsl,preserve-clocking; eeprom@50 { @@ -210,201 +108,92 @@ }; }; - i2c@1740 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c"; - reg = <0x1740 0x20>; - interrupts = <0xb 0x8>; - fsl,preserve-clocking; - }; - - i2ccontrol@1760 { - compatible = "fsl,mpc5121-i2c-ctrl"; - reg = <0x1760 0x8>; - }; - - axe@2000 { - compatible = "fsl,mpc5121-axe"; - reg = <0x2000 0x100>; - interrupts = <42 0x8>; - }; - - display@2100 { - compatible = "fsl,mpc5121-diu"; - reg = <0x2100 0x100>; - interrupts = <64 0x8>; + i2c@1720 { + status = "disabled"; }; - can@2300 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <90 0x8>; - reg = <0x2300 0x80>; - }; - - can@2380 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <91 0x8>; - reg = <0x2380 0x80>; + i2c@1740 { + fsl,preserve-clocking; }; - viu@2400 { - compatible = "fsl,mpc5121-viu"; - reg = <0x2400 0x400>; - interrupts = <67 0x8>; + ethernet@2800 { + phy-handle = <&phy0>; }; mdio@2800 { - compatible = "fsl,mpc5121-fec-mdio"; - reg = <0x2800 0x200>; - #address-cells = <1>; - #size-cells = <0>; - phy: ethernet-phy@0 { + phy0: ethernet-phy@1f { compatible = "smsc,lan8700"; reg = <0x1f>; }; }; - eth0: ethernet@2800 { - compatible = "fsl,mpc5121-fec"; - reg = <0x2800 0x200>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <4 0x8>; - phy-handle = < &phy >; - }; - - // USB1 using external ULPI PHY + /* USB1 using external ULPI PHY */ usb@3000 { - compatible = "fsl,mpc5121-usb2-dr"; - reg = <0x3000 0x600>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <43 0x8>; dr_mode = "host"; - phy_type = "ulpi"; }; - // USB0 using internal UTMI PHY + /* USB0 using internal UTMI PHY */ usb@4000 { - compatible = "fsl,mpc5121-usb2-dr"; - reg = <0x4000 0x600>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x8>; - dr_mode = "otg"; - phy_type = "utmi_wide"; fsl,invert-pwr-fault; }; - // IO control - ioctl@a000 { - compatible = "fsl,mpc5121-ioctl"; - reg = <0xA000 0x1000>; - }; - - // 512x PSCs are not 52xx PSCs compatible - serial@11000 { + psc@11000 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <0>; - reg = <0x11000 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11100 { + psc@11100 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <1>; - reg = <0x11100 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11200 { + psc@11200 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <2>; - reg = <0x11200 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11300 { + psc@11300 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <3>; - reg = <0x11300 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11400 { + psc@11400 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <4>; - reg = <0x11400 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11600 { - compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <6>; - reg = <0x11600 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; + psc@11500 { + status = "disabled"; }; - serial@11800 { + psc@11600 { compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <8>; - reg = <0x11800 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; }; - serial@11B00 { - compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <11>; - reg = <0x11B00 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; + psc@11700 { + status = "disabled"; }; - pscfifo@11f00 { - compatible = "fsl,mpc5121-psc-fifo"; - reg = <0x11f00 0x100>; - interrupts = <40 0x8>; + psc@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; }; - spi@11900 { + psc@11900 { compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; - cell-index = <9>; #address-cells = <1>; #size-cells = <0>; - reg = <0x11900 0x100>; - interrupts = <40 0x8>; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; - // 7845 touch screen controller + /* ADS7845 touch screen controller */ ts@0 { compatible = "ti,ads7846"; reg = <0x0>; spi-max-frequency = <3000000>; - // pen irq is GPIO25 + /* pen irq is GPIO25 */ interrupts = <78 0x8>; }; }; - dma@14000 { - compatible = "fsl,mpc5121-dma"; - reg = <0x14000 0x1800>; - interrupts = <65 0x8>; + psc@11a00 { + status = "disabled"; + }; + + psc@11b00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; }; }; }; diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/ppa8548.dts new file mode 100644 index 0000000..f97ecee --- /dev/null +++ b/arch/powerpc/boot/dts/ppa8548.dts @@ -0,0 +1,166 @@ +/* + * PPA8548 Device Tree Source (36-bit address map) + * Copyright 2013 Prodrive B.V. + * + * Based on: + * MPC8548 CDS Device Tree Source (36-bit address map) + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "ppa8548"; + compatible = "ppa8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x40000000>; + }; + + lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xff800000 0x00800000>; + }; + + soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + pci0: pci@fe0008000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci1: pci@fe0009000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci2: pcie@fe000a000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x11000>; + port1 { + ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>; + }; + }; +}; + +&lbc { + nor@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x00800000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x7A0000>; + label = "user"; + }; + + partition@7A0000 { + reg = <0x7A0000 0x20000>; + label = "env"; + read-only; + }; + + partition@7C0000 { + reg = <0x7C0000 0x40000>; + label = "u-boot"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@6f { + compatible = "intersil,isl1208"; + reg = <0x6f>; + }; + }; + + i2c@3100 { + }; + + /* + * Only ethernet controller @25000 and @26000 are used. + * Use alias enet2 and enet3 for the remainig controllers, + * to stay compatible with mpc8548si-pre.dtsi. + */ + enet2: ethernet@24000 { + status = "disabled"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <7 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <8 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy1>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + crypto@30000 { + status = "disabled"; + }; +}; + +/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/sbc8548-altflash.dts b/arch/powerpc/boot/dts/sbc8548-altflash.dts new file mode 100644 index 0000000..0b38a0d --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-altflash.dts @@ -0,0 +1,115 @@ +/* + * SBC8548 Device Tree Source + * + * Configured for booting off the alternate (64MB SODIMM) flash. + * Requires switching JP12 jumpers and changing SW2.8 setting. + * + * Copyright 2013 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/dts-v1/; + +/include/ "sbc8548-pre.dtsi" + +/{ + localbus@e0000000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0xe0000000 0x5000>; + interrupt-parent = <&mpic>; + + ranges = <0x0 0x0 0xfc000000 0x04000000 /*64MB Flash*/ + 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ + 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ + 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ + 0x6 0x0 0xef800000 0x00800000>; /*8MB Flash*/ + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x04000000>; + compatible = "intel,JS28F128", "cfi-flash"; + bank-width = <4>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* FC000000 -> FFEFFFFF */ + reg = <0x00000000 0x03f00000>; + }; + partition@0x03f00000 { + label = "bootloader"; + /* FFF00000 -> FFFFFFFF */ + reg = <0x03f00000 0x00100000>; + read-only; + }; + }; + + + epld@5,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x5 0x0 0x00b10000>; + ranges = < + 0x0 0x0 0x5 0x000000 0x1fff /* LED */ + 0x1 0x0 0x5 0x100000 0x1fff /* Switches */ + 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */ + 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */ + >; + + led@0,0 { + compatible = "led"; + reg = <0x0 0x0 0x1fff>; + }; + + switches@1,0 { + compatible = "switches"; + reg = <0x1 0x0 0x1fff>; + }; + + hw-rev@3,0 { + compatible = "hw-rev"; + reg = <0x3 0x0 0x1fff>; + }; + + eeprom@b,0 { + compatible = "eeprom"; + reg = <0xb 0 0x1fff>; + }; + + }; + + alt-flash@6,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,JS28F640", "cfi-flash"; + reg = <0x6 0x0 0x800000>; + bank-width = <1>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* EF800000 -> EFF9FFFF */ + reg = <0x00000000 0x007a0000>; + }; + partition@0x7a0000 { + label = "bootloader"; + /* EFFA0000 -> EFFFFFFF */ + reg = <0x007a0000 0x00060000>; + read-only; + }; + }; + + + }; +}; + +/include/ "sbc8548-post.dtsi" diff --git a/arch/powerpc/boot/dts/sbc8548-post.dtsi b/arch/powerpc/boot/dts/sbc8548-post.dtsi new file mode 100644 index 0000000..33a47e2 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-post.dtsi @@ -0,0 +1,295 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xe0000000 0x00100000>; + bus-frequency = <0>; + compatible = "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; + clock-frequency = <66000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + pci1: pcie@e000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x1a 0x2>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8548-pre.dtsi b/arch/powerpc/boot/dts/sbc8548-pre.dtsi new file mode 100644 index 0000000..d8c6629 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-pre.dtsi @@ -0,0 +1,52 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + model = "SBC8548"; + compatible = "SBC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + +}; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 77be771..1df2a09 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -14,44 +14,9 @@ /dts-v1/; -/ { - model = "SBC8548"; - compatible = "SBC8548"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8548@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <0x20>; // 32 bytes - i-cache-line-size = <0x20>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; +/include/ "sbc8548-pre.dtsi" +/{ localbus@e0000000 { #address-cells = <2>; #size-cells = <1>; @@ -63,23 +28,25 @@ 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ - 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/ + 0x6 0x0 0xec000000 0x04000000>; /*64MB Flash*/ flash@0,0 { #address-cells = <1>; #size-cells = <1>; - compatible = "cfi-flash"; + compatible = "intel,JS28F640", "cfi-flash"; reg = <0x0 0x0 0x800000>; bank-width = <1>; device-width = <1>; partition@0x0 { label = "space"; - reg = <0x00000000 0x00100000>; + /* FF800000 -> FFF9FFFF */ + reg = <0x00000000 0x007a0000>; }; - partition@0x100000 { + partition@0x7a0000 { label = "bootloader"; - reg = <0x00100000 0x00700000>; + /* FFFA0000 -> FFFFFFFF */ + reg = <0x007a0000 0x00060000>; read-only; }; }; @@ -122,307 +89,22 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x6 0x0 0x04000000>; - compatible = "cfi-flash"; + compatible = "intel,JS28F128", "cfi-flash"; bank-width = <4>; device-width = <1>; partition@0x0 { + label = "space"; + /* EC000000 -> EFEFFFFF */ + reg = <0x00000000 0x03f00000>; + }; + partition@0x03f00000 { label = "bootloader"; - reg = <0x00000000 0x00100000>; + /* EFF00000 -> EFFFFFFF */ + reg = <0x03f00000 0x00100000>; read-only; }; - partition@0x00100000 { - label = "file-system"; - reg = <0x00100000 0x01f00000>; - }; - partition@0x02000000 { - label = "boot-config"; - reg = <0x02000000 0x00100000>; - }; - partition@0x02100000 { - label = "space"; - reg = <0x02100000 0x01f00000>; - }; }; }; - - soc8548@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - ranges = <0x00000000 0xe0000000 0x00100000>; - bus-frequency = <0>; - compatible = "simple-bus"; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8548-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8548-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <0x12 0x2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8548-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <0x20>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <0x10 0x2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@19 { - interrupt-parent = <&mpic>; - interrupts = <0x6 0x1>; - reg = <0x19>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1a { - interrupt-parent = <&mpic>; - interrupts = <0x7 0x1>; - reg = <0x1a>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities reg - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - }; - - pci0: pci@e0008000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) @66MHz */ - 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; - clock-frequency = <66000000>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - }; - - pci1: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <0x1a 0x2>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; - clock-frequency = <33000000>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x10000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00800000>; - }; - }; }; + +/include/ "sbc8548-post.dtsi" diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts index ba83d54..5c46219 100644 --- a/arch/powerpc/boot/dts/uc101.dts +++ b/arch/powerpc/boot/dts/uc101.dts @@ -13,54 +13,20 @@ /include/ "mpc5200b.dtsi" +&gpt0 { gpio-controller; }; +&gpt1 { gpio-controller; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + / { model = "manroland,uc101"; compatible = "manroland,uc101"; soc5200@f0000000 { - gpt0: timer@600 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt1: timer@610 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt2: timer@620 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt3: timer@630 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt4: timer@640 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt5: timer@650 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt6: timer@660 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt7: timer@670 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - rtc@800 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts index 52d8c1a..fc7073b 100644 --- a/arch/powerpc/boot/dts/virtex440-ml507.dts +++ b/arch/powerpc/boot/dts/virtex440-ml507.dts @@ -272,6 +272,12 @@ xlnx,temac-type = <0>; xlnx,txcsum = <1>; xlnx,txfifo = <0x1000>; + phy-handle = <&phy7>; + clock-frequency = <100000000>; + phy7: phy@7 { + compatible = "marvell,88e1111"; + reg = <7>; + } ; } ; } ; IIC_EEPROM: i2c@81600000 { diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index a0dfef1..e12e60c 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -2,6 +2,8 @@ CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_SLAB=y @@ -16,8 +18,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y CONFIG_KMETER1=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y # CONFIG_SECCOMP is not set CONFIG_NET=y @@ -45,7 +45,6 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_PHRAM=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y -CONFIG_MTD_UBI_DEBUG=y CONFIG_PROC_DEVICETREE=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -76,5 +75,4 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig index f8c51a4..c9765b5 100644 --- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -34,7 +34,6 @@ CONFIG_PREEMPT=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_PCI=y CONFIG_PCIEPORTBUS=y diff --git a/arch/powerpc/configs/85xx/ppa8548_defconfig b/arch/powerpc/configs/85xx/ppa8548_defconfig new file mode 100644 index 0000000..a11337d --- /dev/null +++ b/arch/powerpc/configs/85xx/ppa8548_defconfig @@ -0,0 +1,65 @@ +CONFIG_PPC_85xx=y +CONFIG_PPA8548=y +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_PCI is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_ADVANCED_OPTIONS=y +CONFIG_LOWMEM_SIZE_BOOL=y +CONFIG_LOWMEM_SIZE=0x40000000 +CONFIG_LOWMEM_CAM_NUM_BOOL=y +CONFIG_LOWMEM_CAM_NUM=4 +CONFIG_PAGE_OFFSET_BOOL=y +CONFIG_PAGE_OFFSET=0xb0000000 +CONFIG_KERNEL_START_BOOL=y +CONFIG_KERNEL_START=0xb0000000 +# CONFIG_PHYSICAL_START_BOOL is not set +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 +CONFIG_TASK_SIZE_BOOL=y +CONFIG_TASK_SIZE=0xb0000000 + +CONFIG_FSL_LBC=y +CONFIG_FSL_DMA=y +CONFIG_FSL_RIO=y + +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DMA_ENGINE=y +CONFIG_RAPIDIO_TSI57X=y +CONFIG_RAPIDIO_TSI568=y +CONFIG_RAPIDIO_CPS_XX=y +CONFIG_RAPIDIO_CPS_GEN2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_PROC_DEVICETREE=y + +CONFIG_MTD=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_PHYSMAP_OF=y + +CONFIG_I2C=y +CONFIG_I2C_MPC=y +CONFIG_I2C_CHARDEV +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_ISL1208=y + +CONFIG_NET=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_GIANFAR=y +CONFIG_MARVELL_PHY=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 5b2b651..008a7a4 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -55,3 +55,22 @@ CONFIG_ROOT_NFS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_PHYSMAP_OF=y diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index da731c2..f2f6734 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -25,7 +25,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_1000=y CONFIG_PREEMPT=y CONFIG_BINFMT_MISC=m -CONFIG_IRQ_ALL_CPUS=y CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index 2149360..be73219 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -25,7 +25,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_1000=y CONFIG_PREEMPT=y CONFIG_BINFMT_MISC=y -CONFIG_IRQ_ALL_CPUS=y CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index af2e8e1..b3e2b10 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -25,7 +25,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_1000=y CONFIG_PREEMPT=y CONFIG_BINFMT_MISC=m -CONFIG_IRQ_ALL_CPUS=y CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index 0a92ca0..1a62baf 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -23,7 +23,6 @@ CONFIG_SBC8641D=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_BINFMT_MISC=m -CONFIG_IRQ_ALL_CPUS=y CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 1c0f243..60027c2 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -32,7 +32,6 @@ CONFIG_HIGHMEM=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y -CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_PCI=y CONFIG_PCIEPORTBUS=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index f7df836..3d139fa 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -26,7 +26,6 @@ CONFIG_P5020_DS=y CONFIG_P5040_DS=y # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set CONFIG_BINFMT_MISC=m -CONFIG_IRQ_ALL_CPUS=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 502cd9e..8d00ea5b 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -49,7 +49,6 @@ CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PCI=y CONFIG_PCI_MSI=y diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index bcedeea..bd8a6f7 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,28 +1,27 @@ CONFIG_PPC64=y CONFIG_ALTIVEC=y -# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_PASEMI=y CONFIG_PPC_PASEMI_IOMMU=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_1000=y CONFIG_PPC_64K_PAGES=y # CONFIG_SECCOMP is not set @@ -47,7 +46,6 @@ CONFIG_INET_ESP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_SLRAM=y @@ -58,7 +56,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y @@ -91,21 +88,19 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y -CONFIG_E1000=y CONFIG_TIGON3=y +CONFIG_E1000=y CONFIG_PASEMI_MAC=y +CONFIG_MARVELL_PHY=y CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=4 CONFIG_HW_RANDOM=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y @@ -146,14 +141,11 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_PASEMI=y @@ -164,8 +156,6 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=y CONFIG_UDF_FS=y @@ -177,27 +167,22 @@ CONFIG_HUGETLBFS=y CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_CRC_CCITT=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_BLOWFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 6d03530..aef3f71 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -5,6 +5,9 @@ CONFIG_SMP=y CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_IKCONFIG=y @@ -21,6 +24,8 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y CONFIG_PPC_SPLPAR=y CONFIG_SCANLOG=m CONFIG_PPC_SMLPAR=y @@ -42,10 +47,9 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_PMAC64=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y CONFIG_BINFMT_MISC=m +CONFIG_PPC_TRANSACTIONAL_MEM=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y @@ -73,7 +77,6 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_SCTP=m @@ -130,19 +133,12 @@ CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -151,7 +147,10 @@ CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_BPF_JIT=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=y @@ -173,7 +172,6 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m @@ -205,13 +203,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=y -CONFIG_IEEE1394_SBP2=m -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_RAWIO=y -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_DV1394=m CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y @@ -220,50 +211,43 @@ CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y CONFIG_WINDFARM_PM112=y CONFIG_WINDFARM_PM121=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL_TRAP=y CONFIG_TUN=m -CONFIG_MARVELL_PHY=y -CONFIG_BROADCOM_PHY=m -CONFIG_NET_ETHERNET=y -CONFIG_SUNGEM=y -CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y -CONFIG_IBMVETH=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -CONFIG_E100=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_E1000=y -CONFIG_E1000E=y +CONFIG_PCNET32=y CONFIG_TIGON3=y -CONFIG_BNX2=m -CONFIG_SPIDER_NET=m -CONFIG_GELIC_NET=m -CONFIG_GELIC_WIRELESS=y CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m +CONFIG_BE2NET=m +CONFIG_S2IO=m +CONFIG_IBMVETH=m CONFIG_EHEA=m -CONFIG_IXGBE=m +CONFIG_E100=y +CONFIG_E1000=y +CONFIG_E1000E=y CONFIG_IXGB=m -CONFIG_S2IO=m +CONFIG_IXGBE=m +CONFIG_MLX4_EN=m CONFIG_MYRI10GE=m -CONFIG_NETXEN_NIC=m CONFIG_PASEMI_MAC=y -CONFIG_MLX4_EN=m CONFIG_QLGE=m -CONFIG_BE2NET=m +CONFIG_NETXEN_NIC=m +CONFIG_SUNGEM=y +CONFIG_GELIC_NET=m +CONFIG_GELIC_WIRELESS=y +CONFIG_SPIDER_NET=m +CONFIG_MARVELL_PHY=y +CONFIG_BROADCOM_PHY=m CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPPOE=m -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL_TRAP=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=m CONFIG_INPUT_MISC=y @@ -279,13 +263,10 @@ CONFIG_HVC_RTAS=y CONFIG_HVC_BEAT=y CONFIG_HVCS=m CONFIG_IBM_BSR=m -CONFIG_HW_RANDOM=m -CONFIG_HW_RANDOM_PSERIES=m CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_AMD8111=y CONFIG_I2C_PASEMI=y -# CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y @@ -300,7 +281,6 @@ CONFIG_FB_RADEON=y CONFIG_FB_IBM_GXT4500=y CONFIG_FB_PS3=m CONFIG_LCD_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y @@ -317,18 +297,16 @@ CONFIG_SND_AOA_FABRIC_LAYOUT=m CONFIG_SND_AOA_ONYX=m CONFIG_SND_AOA_TAS=m CONFIG_SND_AOA_TOONIE=m -CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_HID_PANTHERLORD=y CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=m @@ -370,11 +348,9 @@ CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y -CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=y @@ -383,100 +359,53 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y -CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_CIFS=m CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y -CONFIG_PARTITION_ADVANCED=y +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m +CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y CONFIG_CRC_T10DIF=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_LOCKUP_DETECTOR=y -CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_DEBUG_STACK_USAGE=y CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_SCHED_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_DEBUG_STACK_USAGE=y CONFIG_CODE_PATCHING_SELFTEST=y CONFIG_FTR_FIXUP_SELFTEST=y CONFIG_MSI_BITMAP_SELFTEST=y CONFIG_XMON=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_KHAZAD=m @@ -486,11 +415,9 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_NX=y CONFIG_CRYPTO_DEV_NX_ENCRYPT=m CONFIG_VIRTUALIZATION=y CONFIG_KVM_BOOK3S_64=m CONFIG_KVM_BOOK3S_64_HV=y CONFIG_VHOST_NET=m -CONFIG_BPF_JIT=y diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig index f55c276..4b20f76 100644 --- a/arch/powerpc/configs/ppc64e_defconfig +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -4,6 +4,8 @@ CONFIG_SMP=y CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_IKCONFIG=y @@ -18,12 +20,13 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_EFI_PARTITION=y CONFIG_P5020_DS=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_IRQ_ALL_CPUS=y CONFIG_SPARSEMEM_MANUAL=y @@ -46,7 +49,6 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_SCTP=m @@ -103,19 +105,12 @@ CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -125,6 +120,8 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=y @@ -167,41 +164,31 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=y -CONFIG_IEEE1394_SBP2=m -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_RAWIO=y -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_DV1394=m CONFIG_MACINTOSH_DRIVERS=y CONFIG_WINDFARM=y CONFIG_NETDEVICES=y -CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL_TRAP=y CONFIG_TUN=m -CONFIG_MARVELL_PHY=y -CONFIG_BROADCOM_PHY=m -CONFIG_NET_ETHERNET=y -CONFIG_SUNGEM=y -CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -CONFIG_E100=y CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_E1000=y +CONFIG_PCNET32=y CONFIG_TIGON3=y +CONFIG_E100=y +CONFIG_E1000=y CONFIG_IXGB=m +CONFIG_SUNGEM=y +CONFIG_MARVELL_PHY=y +CONFIG_BROADCOM_PHY=m CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPPOE=m -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL_TRAP=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=m CONFIG_INPUT_MISC=y @@ -213,7 +200,6 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_AMD8111=y -# CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y @@ -227,7 +213,6 @@ CONFIG_FB_MATROX_MAVEN=m CONFIG_FB_RADEON=y CONFIG_FB_IBM_GXT4500=y CONFIG_LCD_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y @@ -238,7 +223,6 @@ CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y -CONFIG_USB_HIDDEV=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y @@ -253,8 +237,8 @@ CONFIG_HID_SMARTJOYPLUS=y CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y +CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y @@ -296,73 +280,36 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y -CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_CIFS=m CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m +CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y CONFIG_CRC_T10DIF=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_DEBUG_STACK_USAGE=y CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_IRQSOFF_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_DEBUG_STACK_USAGE=y CONFIG_CODE_PATCHING_SELFTEST=y CONFIG_FTR_FIXUP_SELFTEST=y CONFIG_MSI_BITMAP_SELFTEST=y @@ -371,16 +318,12 @@ CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST6=m diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index c2f4b4a..7a5c15f 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -6,6 +6,7 @@ CONFIG_NR_CPUS=2 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y @@ -24,12 +25,13 @@ CONFIG_PS3_DISK=y CONFIG_PS3_ROM=y CONFIG_PS3_FLASH=y CONFIG_PS3_VRAM=m +CONFIG_PS3_LPM=m # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=y CONFIG_KEXEC=y # CONFIG_SPARSEMEM_VMEMMAP is not set +# CONFIG_COMPACTION is not set CONFIG_SCHED_SMT=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" @@ -59,6 +61,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_BT_HCIBTUSB=m CONFIG_CFG80211=m +CONFIG_CFG80211_WEXT=y CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_RC_MINSTREL is not set @@ -78,7 +81,6 @@ CONFIG_MD=y CONFIG_BLK_DEV_DM=m CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set @@ -119,21 +121,21 @@ CONFIG_SND=m # CONFIG_SND_DRIVERS is not set CONFIG_SND_USB_AUDIO=m CONFIG_HIDRAW=y -CONFIG_USB_HIDDEV=y CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_EZKEY=m CONFIG_HID_TWINHAN=m CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_MICROSOFT=m +CONFIG_HID_PS3REMOTE=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_HID_SMARTJOYPLUS=m +CONFIG_USB_HIDDEV=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_SUSPEND=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m @@ -158,8 +160,8 @@ CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_CIFS=m CONFIG_NLS=y @@ -176,6 +178,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y +CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_CRYPTO_CCM=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 5b8e1e5..c4dfbaf 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -6,12 +6,15 @@ CONFIG_NR_CPUS=2048 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -29,6 +32,8 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y CONFIG_PPC_SPLPAR=y CONFIG_SCANLOG=m CONFIG_PPC_SMLPAR=y @@ -36,10 +41,9 @@ CONFIG_DTL=y # CONFIG_PPC_PMAC is not set CONFIG_RTAS_FLASH=m CONFIG_IBMEBUS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y CONFIG_BINFMT_MISC=m +CONFIG_PPC_TRANSACTIONAL_MEM=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y @@ -65,7 +69,6 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_UDPLITE=m @@ -112,20 +115,15 @@ CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m @@ -146,7 +144,6 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m @@ -177,43 +174,36 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL_TRAP=y CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y -CONFIG_IBMVETH=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -CONFIG_E100=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_E1000=y -CONFIG_E1000E=y +CONFIG_PCNET32=y CONFIG_TIGON3=y -CONFIG_BNX2=m CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m +CONFIG_BE2NET=m +CONFIG_S2IO=m +CONFIG_IBMVETH=y CONFIG_EHEA=y -CONFIG_IXGBE=m +CONFIG_E100=y +CONFIG_E1000=y +CONFIG_E1000E=y CONFIG_IXGB=m -CONFIG_S2IO=m -CONFIG_MYRI10GE=m -CONFIG_NETXEN_NIC=m +CONFIG_IXGBE=m CONFIG_MLX4_EN=m +CONFIG_MYRI10GE=m CONFIG_QLGE=m -CONFIG_BE2NET=m +CONFIG_NETXEN_NIC=m CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPPOE=m -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL_TRAP=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=m CONFIG_INPUT_MISC=y @@ -227,12 +217,9 @@ CONFIG_HVC_CONSOLE=y CONFIG_HVC_RTAS=y CONFIG_HVCS=m CONFIG_IBM_BSR=m -CONFIG_HW_RANDOM=m -CONFIG_HW_RANDOM_PSERIES=m CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=1024 -# CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_OF=y @@ -243,19 +230,17 @@ CONFIG_FB_MATROX_G=y CONFIG_FB_RADEON=y CONFIG_FB_IBM_GXT4500=y CONFIG_LCD_PLATFORM=m -CONFIG_DISPLAY_SUPPORT=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y -CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_HID_PANTHERLORD=y CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set @@ -293,7 +278,6 @@ CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y -CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m @@ -305,61 +289,49 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=m CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y -CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_CIFS=m CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_CRC_T10DIF=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_LOCKUP_DETECTOR=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_DEBUG_STACK_USAGE=y CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_SCHED_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_DEBUG_STACK_USAGE=y CONFIG_CODE_PATCHING_SELFTEST=y CONFIG_FTR_FIXUP_SELFTEST=y CONFIG_MSI_BITMAP_SELFTEST=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_KHAZAD=m @@ -369,7 +341,6 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_NX=y CONFIG_CRYPTO_DEV_NX_ENCRYPT=m CONFIG_VIRTUALIZATION=y diff --git a/arch/powerpc/crypto/Makefile b/arch/powerpc/crypto/Makefile new file mode 100644 index 0000000..2926fb9 --- /dev/null +++ b/arch/powerpc/crypto/Makefile @@ -0,0 +1,9 @@ +# +# powerpc/crypto/Makefile +# +# Arch-specific CryptoAPI modules. +# + +obj-$(CONFIG_CRYPTO_SHA1_PPC) += sha1-powerpc.o + +sha1-powerpc-y := sha1-powerpc-asm.o sha1.o diff --git a/arch/powerpc/crypto/sha1-powerpc-asm.S b/arch/powerpc/crypto/sha1-powerpc-asm.S new file mode 100644 index 0000000..a5f8264 --- /dev/null +++ b/arch/powerpc/crypto/sha1-powerpc-asm.S @@ -0,0 +1,179 @@ +/* + * SHA-1 implementation for PowerPC. + * + * Copyright (C) 2005 Paul Mackerras <paulus@samba.org> + */ + +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> + +/* + * We roll the registers for T, A, B, C, D, E around on each + * iteration; T on iteration t is A on iteration t+1, and so on. + * We use registers 7 - 12 for this. + */ +#define RT(t) ((((t)+5)%6)+7) +#define RA(t) ((((t)+4)%6)+7) +#define RB(t) ((((t)+3)%6)+7) +#define RC(t) ((((t)+2)%6)+7) +#define RD(t) ((((t)+1)%6)+7) +#define RE(t) ((((t)+0)%6)+7) + +/* We use registers 16 - 31 for the W values */ +#define W(t) (((t)%16)+16) + +#define LOADW(t) \ + lwz W(t),(t)*4(r4) + +#define STEPD0_LOAD(t) \ + andc r0,RD(t),RB(t); \ + and r6,RB(t),RC(t); \ + rotlwi RT(t),RA(t),5; \ + or r6,r6,r0; \ + add r0,RE(t),r15; \ + add RT(t),RT(t),r6; \ + add r14,r0,W(t); \ + lwz W((t)+4),((t)+4)*4(r4); \ + rotlwi RB(t),RB(t),30; \ + add RT(t),RT(t),r14 + +#define STEPD0_UPDATE(t) \ + and r6,RB(t),RC(t); \ + andc r0,RD(t),RB(t); \ + rotlwi RT(t),RA(t),5; \ + rotlwi RB(t),RB(t),30; \ + or r6,r6,r0; \ + add r0,RE(t),r15; \ + xor r5,W((t)+4-3),W((t)+4-8); \ + add RT(t),RT(t),r6; \ + xor W((t)+4),W((t)+4-16),W((t)+4-14); \ + add r0,r0,W(t); \ + xor W((t)+4),W((t)+4),r5; \ + add RT(t),RT(t),r0; \ + rotlwi W((t)+4),W((t)+4),1 + +#define STEPD1(t) \ + xor r6,RB(t),RC(t); \ + rotlwi RT(t),RA(t),5; \ + rotlwi RB(t),RB(t),30; \ + xor r6,r6,RD(t); \ + add r0,RE(t),r15; \ + add RT(t),RT(t),r6; \ + add r0,r0,W(t); \ + add RT(t),RT(t),r0 + +#define STEPD1_UPDATE(t) \ + xor r6,RB(t),RC(t); \ + rotlwi RT(t),RA(t),5; \ + rotlwi RB(t),RB(t),30; \ + xor r6,r6,RD(t); \ + add r0,RE(t),r15; \ + xor r5,W((t)+4-3),W((t)+4-8); \ + add RT(t),RT(t),r6; \ + xor W((t)+4),W((t)+4-16),W((t)+4-14); \ + add r0,r0,W(t); \ + xor W((t)+4),W((t)+4),r5; \ + add RT(t),RT(t),r0; \ + rotlwi W((t)+4),W((t)+4),1 + +#define STEPD2_UPDATE(t) \ + and r6,RB(t),RC(t); \ + and r0,RB(t),RD(t); \ + rotlwi RT(t),RA(t),5; \ + or r6,r6,r0; \ + rotlwi RB(t),RB(t),30; \ + and r0,RC(t),RD(t); \ + xor r5,W((t)+4-3),W((t)+4-8); \ + or r6,r6,r0; \ + xor W((t)+4),W((t)+4-16),W((t)+4-14); \ + add r0,RE(t),r15; \ + add RT(t),RT(t),r6; \ + add r0,r0,W(t); \ + xor W((t)+4),W((t)+4),r5; \ + add RT(t),RT(t),r0; \ + rotlwi W((t)+4),W((t)+4),1 + +#define STEP0LD4(t) \ + STEPD0_LOAD(t); \ + STEPD0_LOAD((t)+1); \ + STEPD0_LOAD((t)+2); \ + STEPD0_LOAD((t)+3) + +#define STEPUP4(t, fn) \ + STEP##fn##_UPDATE(t); \ + STEP##fn##_UPDATE((t)+1); \ + STEP##fn##_UPDATE((t)+2); \ + STEP##fn##_UPDATE((t)+3) + +#define STEPUP20(t, fn) \ + STEPUP4(t, fn); \ + STEPUP4((t)+4, fn); \ + STEPUP4((t)+8, fn); \ + STEPUP4((t)+12, fn); \ + STEPUP4((t)+16, fn) + +_GLOBAL(powerpc_sha_transform) + PPC_STLU r1,-STACKFRAMESIZE(r1) + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + + /* Load up A - E */ + lwz RA(0),0(r3) /* A */ + lwz RB(0),4(r3) /* B */ + lwz RC(0),8(r3) /* C */ + lwz RD(0),12(r3) /* D */ + lwz RE(0),16(r3) /* E */ + + LOADW(0) + LOADW(1) + LOADW(2) + LOADW(3) + + lis r15,0x5a82 /* K0-19 */ + ori r15,r15,0x7999 + STEP0LD4(0) + STEP0LD4(4) + STEP0LD4(8) + STEPUP4(12, D0) + STEPUP4(16, D0) + + lis r15,0x6ed9 /* K20-39 */ + ori r15,r15,0xeba1 + STEPUP20(20, D1) + + lis r15,0x8f1b /* K40-59 */ + ori r15,r15,0xbcdc + STEPUP20(40, D2) + + lis r15,0xca62 /* K60-79 */ + ori r15,r15,0xc1d6 + STEPUP4(60, D1) + STEPUP4(64, D1) + STEPUP4(68, D1) + STEPUP4(72, D1) + lwz r20,16(r3) + STEPD1(76) + lwz r19,12(r3) + STEPD1(77) + lwz r18,8(r3) + STEPD1(78) + lwz r17,4(r3) + STEPD1(79) + + lwz r16,0(r3) + add r20,RE(80),r20 + add RD(0),RD(80),r19 + add RC(0),RC(80),r18 + add RB(0),RB(80),r17 + add RA(0),RA(80),r16 + mr RE(0),r20 + stw RA(0),0(r3) + stw RB(0),4(r3) + stw RC(0),8(r3) + stw RD(0),12(r3) + stw RE(0),16(r3) + + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + addi r1,r1,STACKFRAMESIZE + blr diff --git a/arch/powerpc/crypto/sha1.c b/arch/powerpc/crypto/sha1.c new file mode 100644 index 0000000..f9e8b94 --- /dev/null +++ b/arch/powerpc/crypto/sha1.c @@ -0,0 +1,157 @@ +/* + * Cryptographic API. + * + * powerpc implementation of the SHA1 Secure Hash Algorithm. + * + * Derived from cryptoapi implementation, adapted for in-place + * scatterlist interface. + * + * Derived from "crypto/sha1.c" + * Copyright (c) Alan Smithee. + * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk> + * Copyright (c) Jean-Francois Dive <jef@linuxbe.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ +#include <crypto/internal/hash.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/cryptohash.h> +#include <linux/types.h> +#include <crypto/sha.h> +#include <asm/byteorder.h> + +extern void powerpc_sha_transform(u32 *state, const u8 *src, u32 *temp); + +static int sha1_init(struct shash_desc *desc) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha1_state){ + .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, + }; + + return 0; +} + +static int sha1_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int partial, done; + const u8 *src; + + partial = sctx->count & 0x3f; + sctx->count += len; + done = 0; + src = data; + + if ((partial + len) > 63) { + u32 temp[SHA_WORKSPACE_WORDS]; + + if (partial) { + done = -partial; + memcpy(sctx->buffer + partial, data, done + 64); + src = sctx->buffer; + } + + do { + powerpc_sha_transform(sctx->state, src, temp); + done += 64; + src = data + done; + } while (done + 63 < len); + + memset(temp, 0, sizeof(temp)); + partial = 0; + } + memcpy(sctx->buffer + partial, src, len - done); + + return 0; +} + + +/* Add padding and return the message digest. */ +static int sha1_final(struct shash_desc *desc, u8 *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + __be32 *dst = (__be32 *)out; + u32 i, index, padlen; + __be64 bits; + static const u8 padding[64] = { 0x80, }; + + bits = cpu_to_be64(sctx->count << 3); + + /* Pad out to 56 mod 64 */ + index = sctx->count & 0x3f; + padlen = (index < 56) ? (56 - index) : ((64+56) - index); + sha1_update(desc, padding, padlen); + + /* Append length */ + sha1_update(desc, (const u8 *)&bits, sizeof(bits)); + + /* Store state in digest */ + for (i = 0; i < 5; i++) + dst[i] = cpu_to_be32(sctx->state[i]); + + /* Wipe context */ + memset(sctx, 0, sizeof *sctx); + + return 0; +} + +static int sha1_export(struct shash_desc *desc, void *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(out, sctx, sizeof(*sctx)); + return 0; +} + +static int sha1_import(struct shash_desc *desc, const void *in) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(sctx, in, sizeof(*sctx)); + return 0; +} + +static struct shash_alg alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = sha1_init, + .update = sha1_update, + .final = sha1_final, + .export = sha1_export, + .import = sha1_import, + .descsize = sizeof(struct sha1_state), + .statesize = sizeof(struct sha1_state), + .base = { + .cra_name = "sha1", + .cra_driver_name= "sha1-powerpc", + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init sha1_powerpc_mod_init(void) +{ + return crypto_register_shash(&alg); +} + +static void __exit sha1_powerpc_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + +module_init(sha1_powerpc_mod_init); +module_exit(sha1_powerpc_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm"); + +MODULE_ALIAS("sha1-powerpc"); diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 76f81bd..fb3245e 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -106,37 +106,37 @@ extern const char *powerpc_base_platform; /* CPU kernel features */ /* Retain the 32b definitions all use bottom half of word */ -#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000000000000001) -#define CPU_FTR_L2CR ASM_CONST(0x0000000000000002) -#define CPU_FTR_SPEC7450 ASM_CONST(0x0000000000000004) -#define CPU_FTR_ALTIVEC ASM_CONST(0x0000000000000008) -#define CPU_FTR_TAU ASM_CONST(0x0000000000000010) -#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020) -#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040) -#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080) -#define CPU_FTR_601 ASM_CONST(0x0000000000000100) -#define CPU_FTR_DBELL ASM_CONST(0x0000000000000200) -#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400) -#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800) -#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000) -#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000) -#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000) -#define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000) -#define CPU_FTR_476_DD2 ASM_CONST(0x0000000000010000) -#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) -#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) -#define CPU_FTR_DEBUG_LVL_EXC ASM_CONST(0x0000000000080000) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) -#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) -#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) -#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) -#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000) -#define CPU_FTR_SPE ASM_CONST(0x0000000002000000) -#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000) -#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000) -#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000010000000) -#define CPU_FTR_INDEXED_DCR ASM_CONST(0x0000000020000000) -#define CPU_FTR_EMB_HV ASM_CONST(0x0000000040000000) +#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x00000001) +#define CPU_FTR_L2CR ASM_CONST(0x00000002) +#define CPU_FTR_SPEC7450 ASM_CONST(0x00000004) +#define CPU_FTR_ALTIVEC ASM_CONST(0x00000008) +#define CPU_FTR_TAU ASM_CONST(0x00000010) +#define CPU_FTR_CAN_DOZE ASM_CONST(0x00000020) +#define CPU_FTR_USE_TB ASM_CONST(0x00000040) +#define CPU_FTR_L2CSR ASM_CONST(0x00000080) +#define CPU_FTR_601 ASM_CONST(0x00000100) +#define CPU_FTR_DBELL ASM_CONST(0x00000200) +#define CPU_FTR_CAN_NAP ASM_CONST(0x00000400) +#define CPU_FTR_L3CR ASM_CONST(0x00000800) +#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x00001000) +#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x00002000) +#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x00004000) +#define CPU_FTR_NO_DPM ASM_CONST(0x00008000) +#define CPU_FTR_476_DD2 ASM_CONST(0x00010000) +#define CPU_FTR_NEED_COHERENT ASM_CONST(0x00020000) +#define CPU_FTR_NO_BTIC ASM_CONST(0x00040000) +#define CPU_FTR_DEBUG_LVL_EXC ASM_CONST(0x00080000) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x00100000) +#define CPU_FTR_PPC_LE ASM_CONST(0x00200000) +#define CPU_FTR_REAL_LE ASM_CONST(0x00400000) +#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x00800000) +#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x01000000) +#define CPU_FTR_SPE ASM_CONST(0x02000000) +#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x04000000) +#define CPU_FTR_LWSYNC ASM_CONST(0x08000000) +#define CPU_FTR_NOEXECUTE ASM_CONST(0x10000000) +#define CPU_FTR_INDEXED_DCR ASM_CONST(0x20000000) +#define CPU_FTR_EMB_HV ASM_CONST(0x40000000) /* * Add the 64-bit processor unique features in the top half of the word; @@ -148,29 +148,33 @@ extern const char *powerpc_base_platform; #define LONG_ASM_CONST(x) 0 #endif -#define CPU_FTR_HVMODE LONG_ASM_CONST(0x0000000200000000) -#define CPU_FTR_ARCH_201 LONG_ASM_CONST(0x0000000400000000) -#define CPU_FTR_ARCH_206 LONG_ASM_CONST(0x0000000800000000) -#define CPU_FTR_CFAR LONG_ASM_CONST(0x0000001000000000) -#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000) -#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000) -#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000) -#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000) -#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) -#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) -#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) -#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) -#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) -#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000) -#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) -#define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0040000000000000) -#define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0080000000000000) -#define CPU_FTR_ASYM_SMT LONG_ASM_CONST(0x0100000000000000) -#define CPU_FTR_STCX_CHECKS_ADDRESS LONG_ASM_CONST(0x0200000000000000) -#define CPU_FTR_POPCNTB LONG_ASM_CONST(0x0400000000000000) -#define CPU_FTR_POPCNTD LONG_ASM_CONST(0x0800000000000000) -#define CPU_FTR_ICSWX LONG_ASM_CONST(0x1000000000000000) -#define CPU_FTR_VMX_COPY LONG_ASM_CONST(0x2000000000000000) +#define CPU_FTR_HVMODE LONG_ASM_CONST(0x0000000100000000) +#define CPU_FTR_ARCH_201 LONG_ASM_CONST(0x0000000200000000) +#define CPU_FTR_ARCH_206 LONG_ASM_CONST(0x0000000400000000) +#define CPU_FTR_CFAR LONG_ASM_CONST(0x0000000800000000) +#define CPU_FTR_IABR LONG_ASM_CONST(0x0000001000000000) +#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000002000000000) +#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000004000000000) +#define CPU_FTR_SMT LONG_ASM_CONST(0x0000008000000000) +#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000010000000000) +#define CPU_FTR_PURR LONG_ASM_CONST(0x0000020000000000) +#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000040000000000) +#define CPU_FTR_SPURR LONG_ASM_CONST(0x0000080000000000) +#define CPU_FTR_DSCR LONG_ASM_CONST(0x0000100000000000) +#define CPU_FTR_VSX LONG_ASM_CONST(0x0000200000000000) +#define CPU_FTR_SAO LONG_ASM_CONST(0x0000400000000000) +#define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0000800000000000) +#define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0001000000000000) +#define CPU_FTR_ASYM_SMT LONG_ASM_CONST(0x0002000000000000) +#define CPU_FTR_STCX_CHECKS_ADDRESS LONG_ASM_CONST(0x0004000000000000) +#define CPU_FTR_POPCNTB LONG_ASM_CONST(0x0008000000000000) +#define CPU_FTR_POPCNTD LONG_ASM_CONST(0x0010000000000000) +#define CPU_FTR_ICSWX LONG_ASM_CONST(0x0020000000000000) +#define CPU_FTR_VMX_COPY LONG_ASM_CONST(0x0040000000000000) +#define CPU_FTR_TM LONG_ASM_CONST(0x0080000000000000) +#define CPU_FTR_BCTAR LONG_ASM_CONST(0x0100000000000000) +#define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0200000000000000) +#define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000) #ifndef __ASSEMBLY__ @@ -216,6 +220,13 @@ extern const char *powerpc_base_platform; #define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0 #endif +/* We only set the TM feature if the kernel was compiled with TM supprt */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +#define CPU_FTR_TM_COMP CPU_FTR_TM +#else +#define CPU_FTR_TM_COMP 0 +#endif + /* We need to mark all pages as being coherent if we're SMP or we have a * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II * require it for PCI "streaming/prefetch" to work properly. @@ -400,7 +411,8 @@ extern const char *powerpc_base_platform; CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ - CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY) + CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | \ + CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR) #define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -408,7 +420,9 @@ extern const char *powerpc_base_platform; CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR | CPU_FTR_SAO | \ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ - CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY) + CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ + CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | CPU_FTR_BCTAR | \ + CPU_FTR_TM_COMP) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h index 607e4ee..5fa6b20 100644 --- a/arch/powerpc/include/asm/dbell.h +++ b/arch/powerpc/include/asm/dbell.h @@ -28,8 +28,36 @@ enum ppc_dbell { PPC_G_DBELL = 2, /* guest doorbell */ PPC_G_DBELL_CRIT = 3, /* guest critical doorbell */ PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */ + PPC_DBELL_SERVER = 5, /* doorbell on server */ }; +#ifdef CONFIG_PPC_BOOK3S + +#define PPC_DBELL_MSGTYPE PPC_DBELL_SERVER +#define SPRN_DOORBELL_CPUTAG SPRN_TIR +#define PPC_DBELL_TAG_MASK 0x7f + +static inline void _ppc_msgsnd(u32 msg) +{ + if (cpu_has_feature(CPU_FTR_HVMODE)) + __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg)); + else + __asm__ __volatile__ (PPC_MSGSNDP(%0) : : "r" (msg)); +} + +#else /* CONFIG_PPC_BOOK3S */ + +#define PPC_DBELL_MSGTYPE PPC_DBELL +#define SPRN_DOORBELL_CPUTAG SPRN_PIR +#define PPC_DBELL_TAG_MASK 0x3fff + +static inline void _ppc_msgsnd(u32 msg) +{ + __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg)); +} + +#endif /* CONFIG_PPC_BOOK3S */ + extern void doorbell_cause_ipi(int cpu, unsigned long data); extern void doorbell_exception(struct pt_regs *regs); extern void doorbell_setup_this_cpu(void); @@ -39,7 +67,7 @@ static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag) u32 msg = PPC_DBELL_TYPE(type) | (flags & PPC_DBELL_MSG_BRDCAST) | (tag & 0x07ffffff); - __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg)); + _ppc_msgsnd(msg); } #endif /* _ASM_POWERPC_DBELL_H */ diff --git a/arch/powerpc/include/asm/debug.h b/arch/powerpc/include/asm/debug.h index 32de257..d251630 100644 --- a/arch/powerpc/include/asm/debug.h +++ b/arch/powerpc/include/asm/debug.h @@ -4,6 +4,8 @@ #ifndef _ASM_POWERPC_DEBUG_H #define _ASM_POWERPC_DEBUG_H +#include <asm/hw_breakpoint.h> + struct pt_regs; extern struct dentry *powerpc_debugfs_root; @@ -15,7 +17,7 @@ extern int (*__debugger_ipi)(struct pt_regs *regs); extern int (*__debugger_bpt)(struct pt_regs *regs); extern int (*__debugger_sstep)(struct pt_regs *regs); extern int (*__debugger_iabr_match)(struct pt_regs *regs); -extern int (*__debugger_dabr_match)(struct pt_regs *regs); +extern int (*__debugger_break_match)(struct pt_regs *regs); extern int (*__debugger_fault_handler)(struct pt_regs *regs); #define DEBUGGER_BOILERPLATE(__NAME) \ @@ -31,7 +33,7 @@ DEBUGGER_BOILERPLATE(debugger_ipi) DEBUGGER_BOILERPLATE(debugger_bpt) DEBUGGER_BOILERPLATE(debugger_sstep) DEBUGGER_BOILERPLATE(debugger_iabr_match) -DEBUGGER_BOILERPLATE(debugger_dabr_match) +DEBUGGER_BOILERPLATE(debugger_break_match) DEBUGGER_BOILERPLATE(debugger_fault_handler) #else @@ -40,17 +42,18 @@ static inline int debugger_ipi(struct pt_regs *regs) { return 0; } static inline int debugger_bpt(struct pt_regs *regs) { return 0; } static inline int debugger_sstep(struct pt_regs *regs) { return 0; } static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } -static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; } +static inline int debugger_break_match(struct pt_regs *regs) { return 0; } static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } #endif -extern int set_dabr(unsigned long dabr, unsigned long dabrx); +int set_breakpoint(struct arch_hw_breakpoint *brk); #ifdef CONFIG_PPC_ADV_DEBUG_REGS extern void do_send_trap(struct pt_regs *regs, unsigned long address, unsigned long error_code, int signal_code, int brkpt); #else -extern void do_dabr(struct pt_regs *regs, unsigned long address, - unsigned long error_code); + +extern void do_break(struct pt_regs *regs, unsigned long address, + unsigned long error_code); #endif #endif /* _ASM_POWERPC_DEBUG_H */ diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index a8fb03e..a80e32b4 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -201,6 +201,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev); void __init eeh_addr_cache_build(void); void eeh_add_device_tree_early(struct device_node *); void eeh_add_device_tree_late(struct pci_bus *); +void eeh_add_sysfs_files(struct pci_bus *); void eeh_remove_bus_device(struct pci_dev *, int); /** @@ -240,6 +241,8 @@ static inline void eeh_add_device_tree_early(struct device_node *dn) { } static inline void eeh_add_device_tree_late(struct pci_bus *bus) { } +static inline void eeh_add_sysfs_files(struct pci_bus *bus) { } + static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { } static inline void eeh_lock(void) { } diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index ad708dd..05e6d2e 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -47,9 +47,10 @@ #define EX_R3 64 #define EX_LR 72 #define EX_CFAR 80 +#define EX_PPR 88 /* SMT thread status register (priority) */ #ifdef CONFIG_RELOCATABLE -#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ +#define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ ld r12,PACAKBASE(r13); /* get high part of &label */ \ mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \ LOAD_HANDLER(r12,label); \ @@ -60,13 +61,15 @@ blr; #else /* If not relocatable, we can jump directly -- and save messing with LR */ -#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ +#define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \ mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \ li r10,MSR_RI; \ mtmsrd r10,1; /* Set RI (EE=0) */ \ b label; #endif +#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ + __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ /* * As EXCEPTION_PROLOG_PSERIES(), except we've already got relocation on @@ -74,6 +77,7 @@ * case EXCEPTION_RELON_PROLOG_PSERIES_1 will be using lr. */ #define EXCEPTION_RELON_PROLOG_PSERIES(area, label, h, extra, vec) \ + EXCEPTION_PROLOG_0(area); \ EXCEPTION_PROLOG_1(area, extra, vec); \ EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) @@ -107,14 +111,59 @@ #define RESTORE_LR(reg, area) #endif -#define __EXCEPTION_PROLOG_1(area, extra, vec) \ +/* + * PPR save/restore macros used in exceptions_64s.S + * Used for P7 or later processors + */ +#define SAVE_PPR(area, ra, rb) \ +BEGIN_FTR_SECTION_NESTED(940) \ + ld ra,PACACURRENT(r13); \ + ld rb,area+EX_PPR(r13); /* Read PPR from paca */ \ + std rb,TASKTHREADPPR(ra); \ +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940) + +#define RESTORE_PPR_PACA(area, ra) \ +BEGIN_FTR_SECTION_NESTED(941) \ + ld ra,area+EX_PPR(r13); \ + mtspr SPRN_PPR,ra; \ +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941) + +/* + * Increase the priority on systems where PPR save/restore is not + * implemented/ supported. + */ +#define HMT_MEDIUM_PPR_DISCARD \ +BEGIN_FTR_SECTION_NESTED(942) \ + HMT_MEDIUM; \ +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,0,942) /*non P7*/ + +/* + * Get an SPR into a register if the CPU has the given feature + */ +#define OPT_GET_SPR(ra, spr, ftr) \ +BEGIN_FTR_SECTION_NESTED(943) \ + mfspr ra,spr; \ +END_FTR_SECTION_NESTED(ftr,ftr,943) + +/* + * Save a register to the PACA if the CPU has the given feature + */ +#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \ +BEGIN_FTR_SECTION_NESTED(943) \ + std ra,offset(r13); \ +END_FTR_SECTION_NESTED(ftr,ftr,943) + +#define EXCEPTION_PROLOG_0(area) \ GET_PACA(r13); \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - BEGIN_FTR_SECTION_NESTED(66); \ - mfspr r10,SPRN_CFAR; \ - std r10,area+EX_CFAR(r13); \ - END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \ + std r9,area+EX_R9(r13); /* save r9 */ \ + OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR); \ + HMT_MEDIUM; \ + std r10,area+EX_R10(r13); /* save r10 - r12 */ \ + OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR) + +#define __EXCEPTION_PROLOG_1(area, extra, vec) \ + OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR); \ + OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR); \ SAVE_LR(r10, area); \ mfcr r9; \ extra(vec); \ @@ -139,6 +188,7 @@ __EXCEPTION_PROLOG_PSERIES_1(label, h) #define EXCEPTION_PROLOG_PSERIES(area, label, h, extra, vec) \ + EXCEPTION_PROLOG_0(area); \ EXCEPTION_PROLOG_1(area, extra, vec); \ EXCEPTION_PROLOG_PSERIES_1(label, h); @@ -149,10 +199,14 @@ #define __KVM_HANDLER(area, h, n) \ do_kvm_##n: \ + BEGIN_FTR_SECTION_NESTED(947) \ + ld r10,area+EX_CFAR(r13); \ + std r10,HSTATE_CFAR(r13); \ + END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947); \ ld r10,area+EX_R10(r13); \ - stw r9,HSTATE_SCRATCH1(r13); \ + stw r9,HSTATE_SCRATCH1(r13); \ ld r9,area+EX_R9(r13); \ - std r12,HSTATE_SCRATCH0(r13); \ + std r12,HSTATE_SCRATCH0(r13); \ li r12,n; \ b kvmppc_interrupt @@ -224,8 +278,10 @@ do_kvm_##n: \ std r10,0(r1); /* make stack chain pointer */ \ std r0,GPR0(r1); /* save r0 in stackframe */ \ std r10,GPR1(r1); /* save r1 in stackframe */ \ + beq 4f; /* if from kernel mode */ \ ACCOUNT_CPU_USER_ENTRY(r9, r10); \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_PPR(area, r9, r10); \ +4: std r2,GPR2(r1); /* save r2 in stackframe */ \ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ @@ -266,45 +322,74 @@ do_kvm_##n: \ . = loc; \ .globl label##_pSeries; \ label##_pSeries: \ - HMT_MEDIUM; \ + HMT_MEDIUM_PPR_DISCARD; \ SET_SCRATCH0(r13); /* save r13 */ \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \ EXC_STD, KVMTEST_PR, vec) +/* Version of above for when we have to branch out-of-line */ +#define STD_EXCEPTION_PSERIES_OOL(vec, label) \ + .globl label##_pSeries; \ +label##_pSeries: \ + EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_PR, vec); \ + EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_STD) + #define STD_EXCEPTION_HV(loc, vec, label) \ . = loc; \ .globl label##_hv; \ label##_hv: \ - HMT_MEDIUM; \ + HMT_MEDIUM_PPR_DISCARD; \ SET_SCRATCH0(r13); /* save r13 */ \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \ EXC_HV, KVMTEST, vec) +/* Version of above for when we have to branch out-of-line */ +#define STD_EXCEPTION_HV_OOL(vec, label) \ + .globl label##_hv; \ +label##_hv: \ + EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec); \ + EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV) + #define STD_RELON_EXCEPTION_PSERIES(loc, vec, label) \ . = loc; \ .globl label##_relon_pSeries; \ label##_relon_pSeries: \ - HMT_MEDIUM; \ + HMT_MEDIUM_PPR_DISCARD; \ /* No guest interrupts come through here */ \ SET_SCRATCH0(r13); /* save r13 */ \ EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \ EXC_STD, KVMTEST_PR, vec) +#define STD_RELON_EXCEPTION_PSERIES_OOL(vec, label) \ + .globl label##_relon_pSeries; \ +label##_relon_pSeries: \ + EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_PR, vec); \ + EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, EXC_STD) + #define STD_RELON_EXCEPTION_HV(loc, vec, label) \ . = loc; \ .globl label##_relon_hv; \ label##_relon_hv: \ - HMT_MEDIUM; \ + HMT_MEDIUM_PPR_DISCARD; \ /* No guest interrupts come through here */ \ SET_SCRATCH0(r13); /* save r13 */ \ EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \ EXC_HV, KVMTEST, vec) +#define STD_RELON_EXCEPTION_HV_OOL(vec, label) \ + .globl label##_relon_hv; \ +label##_relon_hv: \ + EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec); \ + EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, EXC_HV) + /* This associate vector numbers with bits in paca->irq_happened */ #define SOFTEN_VALUE_0x500 PACA_IRQ_EE #define SOFTEN_VALUE_0x502 PACA_IRQ_EE #define SOFTEN_VALUE_0x900 PACA_IRQ_DEC #define SOFTEN_VALUE_0x982 PACA_IRQ_DEC +#define SOFTEN_VALUE_0xa00 PACA_IRQ_DBELL +#define SOFTEN_VALUE_0xe80 PACA_IRQ_DBELL +#define SOFTEN_VALUE_0xe82 PACA_IRQ_DBELL #define __SOFTEN_TEST(h, vec) \ lbz r10,PACASOFTIRQEN(r13); \ @@ -329,10 +414,12 @@ label##_relon_hv: \ #define SOFTEN_NOTEST_HV(vec) _SOFTEN_TEST(EXC_HV, vec) #define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \ - HMT_MEDIUM; \ + HMT_MEDIUM_PPR_DISCARD; \ SET_SCRATCH0(r13); /* save r13 */ \ - __EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec); \ + EXCEPTION_PROLOG_0(PACA_EXGEN); \ + __EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec); \ EXCEPTION_PROLOG_PSERIES_1(label##_common, h); + #define _MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \ __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) @@ -350,9 +437,16 @@ label##_hv: \ _MASKABLE_EXCEPTION_PSERIES(vec, label, \ EXC_HV, SOFTEN_TEST_HV) +#define MASKABLE_EXCEPTION_HV_OOL(vec, label) \ + .globl label##_hv; \ +label##_hv: \ + EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_TEST_HV, vec); \ + EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV); + #define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \ - HMT_MEDIUM; \ + HMT_MEDIUM_PPR_DISCARD; \ SET_SCRATCH0(r13); /* save r13 */ \ + EXCEPTION_PROLOG_0(PACA_EXGEN); \ __EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec); \ EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, h); #define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \ @@ -372,6 +466,12 @@ label##_relon_hv: \ _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \ EXC_HV, SOFTEN_NOTEST_HV) +#define MASKABLE_RELON_EXCEPTION_HV_OOL(vec, label) \ + .globl label##_relon_hv; \ +label##_relon_hv: \ + EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_NOTEST_HV, vec); \ + EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV); + /* * Our exception common code can be passed various "additions" * to specify the behaviour of interrupts, whether to kick the diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h index 973cc3b..097dee5 100644 --- a/arch/powerpc/include/asm/firmware.h +++ b/arch/powerpc/include/asm/firmware.h @@ -50,6 +50,7 @@ #define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000) #define FW_FEATURE_OPALv2 ASM_CONST(0x0000000020000000) #define FW_FEATURE_SET_MODE ASM_CONST(0x0000000040000000) +#define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000) #ifndef __ASSEMBLY__ @@ -64,7 +65,7 @@ enum { FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO | - FW_FEATURE_SET_MODE, + FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY, FW_FEATURE_PSERIES_ALWAYS = 0, FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2, FW_FEATURE_POWERNV_ALWAYS = 0, diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 0975e5c..4bc2c3d 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -395,6 +395,15 @@ static inline unsigned long cmo_get_page_size(void) { return CMO_PageSize; } + +extern long pSeries_enable_reloc_on_exc(void); +extern long pSeries_disable_reloc_on_exc(void); + +#else + +#define pSeries_enable_reloc_on_exc() do {} while (0) +#define pSeries_disable_reloc_on_exc() do {} while (0) + #endif /* CONFIG_PPC_PSERIES */ #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h index 4234245..eb0f4ac 100644 --- a/arch/powerpc/include/asm/hw_breakpoint.h +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -24,16 +24,30 @@ #define _PPC_BOOK3S_64_HW_BREAKPOINT_H #ifdef __KERNEL__ -#ifdef CONFIG_HAVE_HW_BREAKPOINT - struct arch_hw_breakpoint { unsigned long address; - unsigned long dabrx; - int type; - u8 len; /* length of the target data symbol */ - bool extraneous_interrupt; + u16 type; + u16 len; /* length of the target data symbol */ }; +/* Note: Don't change the the first 6 bits below as they are in the same order + * as the dabr and dabrx. + */ +#define HW_BRK_TYPE_READ 0x01 +#define HW_BRK_TYPE_WRITE 0x02 +#define HW_BRK_TYPE_TRANSLATE 0x04 +#define HW_BRK_TYPE_USER 0x08 +#define HW_BRK_TYPE_KERNEL 0x10 +#define HW_BRK_TYPE_HYP 0x20 +#define HW_BRK_TYPE_EXTRANEOUS_IRQ 0x80 + +/* bits that overlap with the bottom 3 bits of the dabr */ +#define HW_BRK_TYPE_RDWR (HW_BRK_TYPE_READ | HW_BRK_TYPE_WRITE) +#define HW_BRK_TYPE_DABR (HW_BRK_TYPE_RDWR | HW_BRK_TYPE_TRANSLATE) +#define HW_BRK_TYPE_PRIV_ALL (HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \ + HW_BRK_TYPE_HYP) + +#ifdef CONFIG_HAVE_HW_BREAKPOINT #include <linux/kdebug.h> #include <asm/reg.h> #include <asm/debug.h> @@ -43,8 +57,6 @@ struct pmu; struct perf_sample_data; #define HW_BREAKPOINT_ALIGN 0x7 -/* Maximum permissible length of any HW Breakpoint */ -#define HW_BREAKPOINT_LEN 0x8 extern int hw_breakpoint_slots(int type); extern int arch_bp_generic_fields(int type, int *gen_bp_type); @@ -62,7 +74,12 @@ extern void ptrace_triggered(struct perf_event *bp, struct perf_sample_data *data, struct pt_regs *regs); static inline void hw_breakpoint_disable(void) { - set_dabr(0, 0); + struct arch_hw_breakpoint brk; + + brk.address = 0; + brk.type = 0; + brk.len = 0; + set_breakpoint(&brk); } extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs); diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h index 88609b2..cdc3d27 100644 --- a/arch/powerpc/include/asm/kvm_book3s_asm.h +++ b/arch/powerpc/include/asm/kvm_book3s_asm.h @@ -93,6 +93,9 @@ struct kvmppc_host_state { u64 host_dscr; u64 dec_expires; #endif +#ifdef CONFIG_PPC_BOOK3S_64 + u64 cfar; +#endif }; struct kvmppc_book3s_shadow_vcpu { diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index ca9bf45..03d7bea 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -440,6 +440,7 @@ struct kvm_vcpu_arch { ulong uamor; u32 ctrl; ulong dabr; + ulong cfar; #endif u32 vrsave; /* also USPRG0 */ u32 mmucr; diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 19d9d96..3d6b410 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -180,6 +180,10 @@ struct machdep_calls { int (*set_dabr)(unsigned long dabr, unsigned long dabrx); + /* Set DAWR for this platform, leave empty for default implemenation */ + int (*set_dawr)(unsigned long dawr, + unsigned long dawrx); + #ifdef CONFIG_PPC32 /* XXX for now */ /* A general init function, called by ppc_init in init/main.c. May be NULL. */ diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h index 8c0ab2c..885c040 100644 --- a/arch/powerpc/include/asm/mpc5121.h +++ b/arch/powerpc/include/asm/mpc5121.h @@ -53,4 +53,21 @@ struct mpc512x_ccm { u32 m4ccr; /* MSCAN4 CCR */ u8 res[0x98]; /* Reserved */ }; + +/* + * LPC Module + */ +struct mpc512x_lpc { + u32 cs_cfg[8]; /* CS config */ + u32 cs_ctrl; /* CS Control Register */ + u32 cs_status; /* CS Status Register */ + u32 burst_ctrl; /* CS Burst Control Register */ + u32 deadcycle_ctrl; /* CS Deadcycle Control Register */ + u32 holdcycle_ctrl; /* CS Holdcycle Control Register */ + u32 alt; /* Address Latch Timing Register */ +}; + +int mpc512x_cs_config(unsigned int cs, u32 val); +int __init mpc5121_clk_init(void); + #endif /* __ASM_POWERPC_MPC5121_H__ */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index e9e7a69..77c91e7 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -93,9 +93,9 @@ struct paca_struct { * Now, starting in cacheline 2, the exception save areas */ /* used for most interrupts/exceptions */ - u64 exgen[11] __attribute__((aligned(0x80))); - u64 exmc[11]; /* used for machine checks */ - u64 exslb[11]; /* used for SLB/segment table misses + u64 exgen[12] __attribute__((aligned(0x80))); + u64 exmc[12]; /* used for machine checks */ + u64 exslb[12]; /* used for SLB/segment table misses * on the linear mapping */ /* SLB related definitions */ u16 vmalloc_sllp; @@ -137,6 +137,9 @@ struct paca_struct { u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */ u8 nap_state_lost; /* NV GPR values lost in power7_idle */ u64 sprg3; /* Saved user-visible sprg */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + u64 tm_scratch; /* TM scratch area for reclaim */ +#endif #ifdef CONFIG_PPC_POWERNV /* Pointer to OPAL machine check event structure set by the @@ -167,7 +170,6 @@ struct paca_struct { }; extern struct paca_struct *paca; -extern __initdata struct paca_struct boot_paca; extern void initialise_paca(struct paca_struct *new_paca, int cpu); extern void setup_paca(struct paca_struct *new_paca); extern void allocate_pacas(void); diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index 136bba6..d0aec72 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -47,11 +47,11 @@ struct power_pmu { /* * Values for power_pmu.flags */ -#define PPMU_LIMITED_PMC5_6 1 /* PMC5/6 have limited function */ -#define PPMU_ALT_SIPR 2 /* uses alternate posn for SIPR/HV */ -#define PPMU_NO_SIPR 4 /* no SIPR/HV in MMCRA at all */ -#define PPMU_NO_CONT_SAMPLING 8 /* no continuous sampling */ -#define PPMU_SIAR_VALID 16 /* Processor has SIAR Valid bit */ +#define PPMU_LIMITED_PMC5_6 0x00000001 /* PMC5/6 have limited function */ +#define PPMU_ALT_SIPR 0x00000002 /* uses alternate posn for SIPR/HV */ +#define PPMU_NO_SIPR 0x00000004 /* no SIPR/HV in MMCRA at all */ +#define PPMU_NO_CONT_SAMPLING 0x00000008 /* no continuous sampling */ +#define PPMU_SIAR_VALID 0x00000010 /* Processor has SIAR Valid bit */ /* * Values for flags to get_alternatives() diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 51fb00a..8752bc8 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -100,6 +100,7 @@ #define PPC_INST_MFSPR_PVR 0x7c1f42a6 #define PPC_INST_MFSPR_PVR_MASK 0xfc1fffff #define PPC_INST_MSGSND 0x7c00019c +#define PPC_INST_MSGSNDP 0x7c00011c #define PPC_INST_NOP 0x60000000 #define PPC_INST_POPCNTB 0x7c0000f4 #define PPC_INST_POPCNTB_MASK 0xfc0007fe @@ -128,6 +129,9 @@ #define PPC_INST_TLBSRX_DOT 0x7c0006a5 #define PPC_INST_XXLOR 0xf0000510 #define PPC_INST_XVCPSGNDP 0xf0000780 +#define PPC_INST_TRECHKPT 0x7c0007dd +#define PPC_INST_TRECLAIM 0x7c00075d +#define PPC_INST_TABORT 0x7c00071d #define PPC_INST_NAP 0x4c000364 #define PPC_INST_SLEEP 0x4c0003a4 @@ -227,6 +231,8 @@ ___PPC_RB(b) | __PPC_EH(eh)) #define PPC_MSGSND(b) stringify_in_c(.long PPC_INST_MSGSND | \ ___PPC_RB(b)) +#define PPC_MSGSNDP(b) stringify_in_c(.long PPC_INST_MSGSNDP | \ + ___PPC_RB(b)) #define PPC_POPCNTB(a, s) stringify_in_c(.long PPC_INST_POPCNTB | \ __PPC_RA(a) | __PPC_RS(s)) #define PPC_POPCNTD(a, s) stringify_in_c(.long PPC_INST_POPCNTD | \ @@ -291,4 +297,11 @@ #define PPC_NAP stringify_in_c(.long PPC_INST_NAP) #define PPC_SLEEP stringify_in_c(.long PPC_INST_SLEEP) +/* Transactional memory instructions */ +#define TRECHKPT stringify_in_c(.long PPC_INST_TRECHKPT) +#define TRECLAIM(r) stringify_in_c(.long PPC_INST_TRECLAIM \ + | __PPC_RA(r)) +#define TABORT(r) stringify_in_c(.long PPC_INST_TABORT \ + | __PPC_RA(r)) + #endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/arch/powerpc/include/asm/ppc4xx_ocm.h b/arch/powerpc/include/asm/ppc4xx_ocm.h new file mode 100644 index 0000000..6ce9046 --- /dev/null +++ b/arch/powerpc/include/asm/ppc4xx_ocm.h @@ -0,0 +1,45 @@ +/* + * PowerPC 4xx OCM memory allocation support + * + * (C) Copyright 2009, Applied Micro Circuits Corporation + * Victor Gallardo (vgallardo@amcc.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_POWERPC_PPC4XX_OCM_H__ +#define __ASM_POWERPC_PPC4XX_OCM_H__ + +#define PPC4XX_OCM_NON_CACHED 0 +#define PPC4XX_OCM_CACHED 1 + +#if defined(CONFIG_PPC4xx_OCM) + +void *ppc4xx_ocm_alloc(phys_addr_t *phys, int size, int align, + int flags, const char *owner); +void ppc4xx_ocm_free(const void *virt); + +#else + +#define ppc4xx_ocm_alloc(phys, size, align, flags, owner) NULL +#define ppc4xx_ocm_free(addr) ((void)0) + +#endif /* CONFIG_PPC4xx_OCM */ + +#endif /* __ASM_POWERPC_PPC4XX_OCM_H__ */ diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 2d0e1f5..cea8496 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -30,7 +30,6 @@ #define ACCOUNT_STOLEN_TIME #else #define ACCOUNT_CPU_USER_ENTRY(ra, rb) \ - beq 2f; /* if from kernel mode */ \ MFTB(ra); /* get timebase */ \ ld rb,PACA_STARTTIME_USER(r13); \ std ra,PACA_STARTTIME(r13); \ @@ -38,7 +37,6 @@ ld ra,PACA_USER_TIME(r13); \ add ra,ra,rb; /* add on to user time */ \ std ra,PACA_USER_TIME(r13); \ -2: #define ACCOUNT_CPU_USER_EXIT(ra, rb) \ MFTB(ra); /* get timebase */ \ @@ -125,6 +123,89 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) #define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) +/* Save/restore FPRs, VRs and VSRs from their checkpointed backups in + * thread_struct: + */ +#define SAVE_FPR_TRANSACT(n, base) stfd n,THREAD_TRANSACT_FPR0+ \ + 8*TS_FPRWIDTH*(n)(base) +#define SAVE_2FPRS_TRANSACT(n, base) SAVE_FPR_TRANSACT(n, base); \ + SAVE_FPR_TRANSACT(n+1, base) +#define SAVE_4FPRS_TRANSACT(n, base) SAVE_2FPRS_TRANSACT(n, base); \ + SAVE_2FPRS_TRANSACT(n+2, base) +#define SAVE_8FPRS_TRANSACT(n, base) SAVE_4FPRS_TRANSACT(n, base); \ + SAVE_4FPRS_TRANSACT(n+4, base) +#define SAVE_16FPRS_TRANSACT(n, base) SAVE_8FPRS_TRANSACT(n, base); \ + SAVE_8FPRS_TRANSACT(n+8, base) +#define SAVE_32FPRS_TRANSACT(n, base) SAVE_16FPRS_TRANSACT(n, base); \ + SAVE_16FPRS_TRANSACT(n+16, base) + +#define REST_FPR_TRANSACT(n, base) lfd n,THREAD_TRANSACT_FPR0+ \ + 8*TS_FPRWIDTH*(n)(base) +#define REST_2FPRS_TRANSACT(n, base) REST_FPR_TRANSACT(n, base); \ + REST_FPR_TRANSACT(n+1, base) +#define REST_4FPRS_TRANSACT(n, base) REST_2FPRS_TRANSACT(n, base); \ + REST_2FPRS_TRANSACT(n+2, base) +#define REST_8FPRS_TRANSACT(n, base) REST_4FPRS_TRANSACT(n, base); \ + REST_4FPRS_TRANSACT(n+4, base) +#define REST_16FPRS_TRANSACT(n, base) REST_8FPRS_TRANSACT(n, base); \ + REST_8FPRS_TRANSACT(n+8, base) +#define REST_32FPRS_TRANSACT(n, base) REST_16FPRS_TRANSACT(n, base); \ + REST_16FPRS_TRANSACT(n+16, base) + + +#define SAVE_VR_TRANSACT(n,b,base) li b,THREAD_TRANSACT_VR0+(16*(n)); \ + stvx n,b,base +#define SAVE_2VRS_TRANSACT(n,b,base) SAVE_VR_TRANSACT(n,b,base); \ + SAVE_VR_TRANSACT(n+1,b,base) +#define SAVE_4VRS_TRANSACT(n,b,base) SAVE_2VRS_TRANSACT(n,b,base); \ + SAVE_2VRS_TRANSACT(n+2,b,base) +#define SAVE_8VRS_TRANSACT(n,b,base) SAVE_4VRS_TRANSACT(n,b,base); \ + SAVE_4VRS_TRANSACT(n+4,b,base) +#define SAVE_16VRS_TRANSACT(n,b,base) SAVE_8VRS_TRANSACT(n,b,base); \ + SAVE_8VRS_TRANSACT(n+8,b,base) +#define SAVE_32VRS_TRANSACT(n,b,base) SAVE_16VRS_TRANSACT(n,b,base); \ + SAVE_16VRS_TRANSACT(n+16,b,base) + +#define REST_VR_TRANSACT(n,b,base) li b,THREAD_TRANSACT_VR0+(16*(n)); \ + lvx n,b,base +#define REST_2VRS_TRANSACT(n,b,base) REST_VR_TRANSACT(n,b,base); \ + REST_VR_TRANSACT(n+1,b,base) +#define REST_4VRS_TRANSACT(n,b,base) REST_2VRS_TRANSACT(n,b,base); \ + REST_2VRS_TRANSACT(n+2,b,base) +#define REST_8VRS_TRANSACT(n,b,base) REST_4VRS_TRANSACT(n,b,base); \ + REST_4VRS_TRANSACT(n+4,b,base) +#define REST_16VRS_TRANSACT(n,b,base) REST_8VRS_TRANSACT(n,b,base); \ + REST_8VRS_TRANSACT(n+8,b,base) +#define REST_32VRS_TRANSACT(n,b,base) REST_16VRS_TRANSACT(n,b,base); \ + REST_16VRS_TRANSACT(n+16,b,base) + + +#define SAVE_VSR_TRANSACT(n,b,base) li b,THREAD_TRANSACT_VSR0+(16*(n)); \ + STXVD2X(n,R##base,R##b) +#define SAVE_2VSRS_TRANSACT(n,b,base) SAVE_VSR_TRANSACT(n,b,base); \ + SAVE_VSR_TRANSACT(n+1,b,base) +#define SAVE_4VSRS_TRANSACT(n,b,base) SAVE_2VSRS_TRANSACT(n,b,base); \ + SAVE_2VSRS_TRANSACT(n+2,b,base) +#define SAVE_8VSRS_TRANSACT(n,b,base) SAVE_4VSRS_TRANSACT(n,b,base); \ + SAVE_4VSRS_TRANSACT(n+4,b,base) +#define SAVE_16VSRS_TRANSACT(n,b,base) SAVE_8VSRS_TRANSACT(n,b,base); \ + SAVE_8VSRS_TRANSACT(n+8,b,base) +#define SAVE_32VSRS_TRANSACT(n,b,base) SAVE_16VSRS_TRANSACT(n,b,base); \ + SAVE_16VSRS_TRANSACT(n+16,b,base) + +#define REST_VSR_TRANSACT(n,b,base) li b,THREAD_TRANSACT_VSR0+(16*(n)); \ + LXVD2X(n,R##base,R##b) +#define REST_2VSRS_TRANSACT(n,b,base) REST_VSR_TRANSACT(n,b,base); \ + REST_VSR_TRANSACT(n+1,b,base) +#define REST_4VSRS_TRANSACT(n,b,base) REST_2VSRS_TRANSACT(n,b,base); \ + REST_2VSRS_TRANSACT(n+2,b,base) +#define REST_8VSRS_TRANSACT(n,b,base) REST_4VSRS_TRANSACT(n,b,base); \ + REST_4VSRS_TRANSACT(n+4,b,base) +#define REST_16VSRS_TRANSACT(n,b,base) REST_8VSRS_TRANSACT(n,b,base); \ + REST_8VSRS_TRANSACT(n+8,b,base) +#define REST_32VSRS_TRANSACT(n,b,base) REST_16VSRS_TRANSACT(n,b,base); \ + REST_16VSRS_TRANSACT(n+16,b,base) + /* Save the lower 32 VSRs in the thread VSR region */ #define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,R##base,R##b) #define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) @@ -391,6 +472,31 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) FTR_SECTION_ELSE_NESTED(848); \ mtocrf (FXM), RS; \ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848) + +/* + * PPR restore macros used in entry_64.S + * Used for P7 or later processors + */ +#define HMT_MEDIUM_LOW_HAS_PPR \ +BEGIN_FTR_SECTION_NESTED(944) \ + HMT_MEDIUM_LOW; \ +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,944) + +#define SET_DEFAULT_THREAD_PPR(ra, rb) \ +BEGIN_FTR_SECTION_NESTED(945) \ + lis ra,INIT_PPR@highest; /* default ppr=3 */ \ + ld rb,PACACURRENT(r13); \ + sldi ra,ra,32; /* 11- 13 bits are used for ppr */ \ + std ra,TASKTHREADPPR(rb); \ +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,945) + +#define RESTORE_PPR(ra, rb) \ +BEGIN_FTR_SECTION_NESTED(946) \ + ld ra,PACACURRENT(r13); \ + ld rb,TASKTHREADPPR(ra); \ + mtspr SPRN_PPR,rb; /* Restore PPR */ \ +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946) + #endif /* diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 8750204..7ff9eaa 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -18,11 +18,22 @@ #define TS_FPRWIDTH 1 #endif +#ifdef CONFIG_PPC64 +/* Default SMT priority is set to 3. Use 11- 13bits to save priority. */ +#define PPR_PRIORITY 3 +#ifdef __ASSEMBLY__ +#define INIT_PPR (PPR_PRIORITY << 50) +#else +#define INIT_PPR ((u64)PPR_PRIORITY << 50) +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_PPC64 */ + #ifndef __ASSEMBLY__ #include <linux/compiler.h> #include <linux/cache.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/hw_breakpoint.h> /* We do _not_ want to define new machine types at all, those must die * in favor of using the device-tree @@ -141,6 +152,7 @@ typedef struct { #define TS_FPROFFSET 0 #define TS_VSRLOWOFFSET 1 #define TS_FPR(i) fpr[i][TS_FPROFFSET] +#define TS_TRANS_FPR(i) transact_fpr[i][TS_FPROFFSET] struct thread_struct { unsigned long ksp; /* Kernel stack pointer */ @@ -215,8 +227,7 @@ struct thread_struct { struct perf_event *last_hit_ubp; #endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif - unsigned long dabr; /* Data address breakpoint register */ - unsigned long dabrx; /* ... extension */ + struct arch_hw_breakpoint hw_brk; /* info on the hardware breakpoint */ unsigned long trap_nr; /* last trap # on this thread */ #ifdef CONFIG_ALTIVEC /* Complete AltiVec register set */ @@ -236,6 +247,34 @@ struct thread_struct { unsigned long spefscr; /* SPE & eFP status */ int used_spe; /* set if process has used spe */ #endif /* CONFIG_SPE */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + u64 tm_tfhar; /* Transaction fail handler addr */ + u64 tm_texasr; /* Transaction exception & summary */ + u64 tm_tfiar; /* Transaction fail instr address reg */ + unsigned long tm_orig_msr; /* Thread's MSR on ctx switch */ + struct pt_regs ckpt_regs; /* Checkpointed registers */ + + /* + * Transactional FP and VSX 0-31 register set. + * NOTE: the sense of these is the opposite of the integer ckpt_regs! + * + * When a transaction is active/signalled/scheduled etc., *regs is the + * most recent set of/speculated GPRs with ckpt_regs being the older + * checkpointed regs to which we roll back if transaction aborts. + * + * However, fpr[] is the checkpointed 'base state' of FP regs, and + * transact_fpr[] is the new set of transactional values. + * VRs work the same way. + */ + double transact_fpr[32][TS_FPRWIDTH]; + struct { + unsigned int pad; + unsigned int val; /* Floating point status */ + } transact_fpscr; + vector128 transact_vr[32] __attribute__((aligned(16))); + vector128 transact_vscr __attribute__((aligned(16))); + unsigned long transact_vrsave; +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ #ifdef CONFIG_KVM_BOOK3S_32_HANDLER void* kvm_shadow_vcpu; /* KVM internal data */ #endif /* CONFIG_KVM_BOOK3S_32_HANDLER */ @@ -245,6 +284,10 @@ struct thread_struct { #ifdef CONFIG_PPC64 unsigned long dscr; int dscr_inherit; + unsigned long ppr; /* used to save/restore SMT priority */ +#endif +#ifdef CONFIG_PPC_BOOK3S_64 + unsigned long tar; #endif }; @@ -278,6 +321,7 @@ struct thread_struct { .fpr = {{0}}, \ .fpscr = { .val = 0, }, \ .fpexc_mode = 0, \ + .ppr = INIT_PPR, \ } #endif diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h index 0e15db4..678a7c1 100644 --- a/arch/powerpc/include/asm/ps3.h +++ b/arch/powerpc/include/asm/ps3.h @@ -245,7 +245,7 @@ enum lv1_result { static inline const char* ps3_result(int result) { -#if defined(DEBUG) +#if defined(DEBUG) || defined(PS3_VERBOSE_RESULT) switch (result) { case LV1_SUCCESS: return "LV1_SUCCESS (0)"; diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 3d5c9dc..7035e60 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -29,6 +29,10 @@ #define MSR_SF_LG 63 /* Enable 64 bit mode */ #define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ #define MSR_HV_LG 60 /* Hypervisor state */ +#define MSR_TS_T_LG 34 /* Trans Mem state: Transactional */ +#define MSR_TS_S_LG 33 /* Trans Mem state: Suspended */ +#define MSR_TS_LG 33 /* Trans Mem state (2 bits) */ +#define MSR_TM_LG 32 /* Trans Mem Available */ #define MSR_VEC_LG 25 /* Enable AltiVec */ #define MSR_VSX_LG 23 /* Enable VSX */ #define MSR_POW_LG 18 /* Enable Power Management */ @@ -98,6 +102,26 @@ #define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ #define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ +#define MSR_TM __MASK(MSR_TM_LG) /* Transactional Mem Available */ +#define MSR_TS_N 0 /* Non-transactional */ +#define MSR_TS_S __MASK(MSR_TS_S_LG) /* Transaction Suspended */ +#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */ +#define MSR_TS_MASK (MSR_TS_T | MSR_TS_S) /* Transaction State bits */ +#define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */ +#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T) +#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S) + +/* Reason codes describing kernel causes for transaction aborts. By + convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if + the failure is persistent. +*/ +#define TM_CAUSE_RESCHED 0xfe +#define TM_CAUSE_TLBI 0xfc +#define TM_CAUSE_FAC_UNAV 0xfa +#define TM_CAUSE_SYSCALL 0xf9 /* Persistent */ +#define TM_CAUSE_MISC 0xf6 +#define TM_CAUSE_SIGNAL 0xf4 + #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF @@ -193,6 +217,10 @@ #define SPRN_UAMOR 0x9d /* User Authority Mask Override Register */ #define SPRN_AMOR 0x15d /* Authority Mask Override Register */ #define SPRN_ACOP 0x1F /* Available Coprocessor Register */ +#define SPRN_TFIAR 0x81 /* Transaction Failure Inst Addr */ +#define SPRN_TEXASR 0x82 /* Transaction EXception & Summary */ +#define SPRN_TEXASRU 0x83 /* '' '' '' Upper 32 */ +#define SPRN_TFHAR 0x80 /* Transaction Failure Handler Addr */ #define SPRN_CTRLF 0x088 #define SPRN_CTRLT 0x098 #define CTRL_CT 0xc0000000 /* current thread */ @@ -200,10 +228,12 @@ #define CTRL_CT1 0x40000000 /* thread 1 */ #define CTRL_TE 0x00c00000 /* thread enable */ #define CTRL_RUNLATCH 0x1 +#define SPRN_DAWR 0xB4 +#define SPRN_DAWRX 0xBC +#define DAWRX_USER (1UL << 0) +#define DAWRX_KERNEL (1UL << 1) +#define DAWRX_HYP (1UL << 2) #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ -#define DABR_TRANSLATION (1UL << 2) -#define DABR_DATA_WRITE (1UL << 1) -#define DABR_DATA_READ (1UL << 0) #define SPRN_DABR2 0x13D /* e300 */ #define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ #define DABRX_USER (1UL << 0) @@ -235,6 +265,9 @@ #define SPRN_HRMOR 0x139 /* Real mode offset register */ #define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */ #define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */ +#define SPRN_FSCR 0x099 /* Facility Status & Control Register */ +#define FSCR_TAR (1<<8) /* Enable Target Adress Register */ +#define SPRN_TAR 0x32f /* Target Address Register */ #define SPRN_LPCR 0x13E /* LPAR Control Register */ #define LPCR_VPM0 (1ul << (63-0)) #define LPCR_VPM1 (1ul << (63-1)) @@ -289,6 +322,7 @@ #define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ #define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ #define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ +#define SPRN_PPR 0x380 /* SMT Thread status Register */ #define SPRN_DEC 0x016 /* Decrement Register */ #define SPRN_DER 0x095 /* Debug Enable Regsiter */ @@ -483,6 +517,7 @@ #ifndef SPRN_PIR #define SPRN_PIR 0x3FF /* Processor Identification Register */ #endif +#define SPRN_TIR 0x1BE /* Thread Identification Register */ #define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ #define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ #define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ @@ -763,7 +798,7 @@ * HV mode in which case it is HSPRG0 * * 64-bit server: - * - SPRG0 unused (reserved for HV on Power4) + * - SPRG0 scratch for TM recheckpoint/reclaim (reserved for HV on Power4) * - SPRG2 scratch for exception vectors * - SPRG3 CPU and NUMA node for VDSO getcpu (user visible) * - HSPRG0 stores PACA in HV mode diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index a0f358d..4ee06fe 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -10,6 +10,9 @@ extern char __end_interrupts[]; +extern char __prom_init_toc_start[]; +extern char __prom_init_toc_end[]; + static inline int in_kernel_text(unsigned long addr) { if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end) diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h index 7124fc0..5b23f91 100644 --- a/arch/powerpc/include/asm/spinlock.h +++ b/arch/powerpc/include/asm/spinlock.h @@ -96,7 +96,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) #if defined(CONFIG_PPC_SPLPAR) /* We only yield to the hypervisor if we are in shared processor mode */ -#define SHARED_PROCESSOR (get_lppaca()->shared_proc) +#define SHARED_PROCESSOR (local_paca->lppaca_ptr->shared_proc) extern void __spin_yield(arch_spinlock_t *lock); extern void __rw_yield(arch_rwlock_t *lock); #else /* SPLPAR */ diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h new file mode 100644 index 0000000..4b4449a --- /dev/null +++ b/arch/powerpc/include/asm/tm.h @@ -0,0 +1,20 @@ +/* + * Transactional memory support routines to reclaim and recheckpoint + * transactional process state. + * + * Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation. + */ + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +extern void do_load_up_transact_fpu(struct thread_struct *thread); +extern void do_load_up_transact_altivec(struct thread_struct *thread); +#endif + +extern void tm_enable(void); +extern void tm_reclaim(struct thread_struct *thread, + unsigned long orig_msr, uint8_t cause); +extern void tm_recheckpoint(struct thread_struct *thread, + unsigned long orig_msr); +extern void tm_abort(uint8_t cause); +extern void tm_save_sprs(struct thread_struct *thread); +extern void tm_restore_sprs(struct thread_struct *thread); diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h index ee67a2b..66b9ca4 100644 --- a/arch/powerpc/include/uapi/asm/ptrace.h +++ b/arch/powerpc/include/uapi/asm/ptrace.h @@ -108,6 +108,7 @@ struct pt_regs { #define PT_DAR 41 #define PT_DSISR 42 #define PT_RESULT 43 +#define PT_DSCR 44 #define PT_REGS_COUNT 44 #define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ @@ -146,34 +147,34 @@ struct pt_regs { * structures. This also simplifies the implementation of a bi-arch * (combined (32- and 64-bit) gdb. */ -#define PTRACE_GETVRREGS 18 -#define PTRACE_SETVRREGS 19 +#define PTRACE_GETVRREGS 0x12 +#define PTRACE_SETVRREGS 0x13 /* Get/set all the upper 32-bits of the SPE registers, accumulator, and * spefscr, in one go */ -#define PTRACE_GETEVRREGS 20 -#define PTRACE_SETEVRREGS 21 +#define PTRACE_GETEVRREGS 0x14 +#define PTRACE_SETEVRREGS 0x15 /* Get the first 32 128bit VSX registers */ -#define PTRACE_GETVSRREGS 27 -#define PTRACE_SETVSRREGS 28 +#define PTRACE_GETVSRREGS 0x1b +#define PTRACE_SETVSRREGS 0x1c /* * Get or set a debug register. The first 16 are DABR registers and the * second 16 are IABR registers. */ -#define PTRACE_GET_DEBUGREG 25 -#define PTRACE_SET_DEBUGREG 26 +#define PTRACE_GET_DEBUGREG 0x19 +#define PTRACE_SET_DEBUGREG 0x1a /* (new) PTRACE requests using the same numbers as x86 and the same * argument ordering. Additionally, they support more registers too */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -#define PTRACE_GETREGS64 22 -#define PTRACE_SETREGS64 23 +#define PTRACE_GETREGS 0xc +#define PTRACE_SETREGS 0xd +#define PTRACE_GETFPREGS 0xe +#define PTRACE_SETFPREGS 0xf +#define PTRACE_GETREGS64 0x16 +#define PTRACE_SETREGS64 0x17 /* Calls to trace a 64bit program from a 32bit program */ #define PPC_PTRACE_PEEKTEXT_3264 0x95 diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8f61934..f960a79 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -7,7 +7,7 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror ifeq ($(CONFIG_PPC64),y) -CFLAGS_prom_init.o += -mno-minimal-toc +CFLAGS_prom_init.o += $(NO_MINIMAL_TOC) endif ifeq ($(CONFIG_PPC32),y) CFLAGS_prom_init.o += -fPIC @@ -75,8 +75,8 @@ endif obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -obj-$(CONFIG_PPC_FSL_BOOK3E) += cpu_setup_fsl_booke.o dbell.o -obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o +obj-$(CONFIG_PPC_FSL_BOOK3E) += cpu_setup_fsl_booke.o +obj-$(CONFIG_PPC_DOORBELL) += dbell.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o extra-y := head_$(CONFIG_WORD_SIZE).o @@ -91,7 +91,6 @@ obj-$(CONFIG_RELOCATABLE_PPC32) += reloc_32.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_SMP) += smp.o @@ -122,6 +121,8 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y) obj-y += iomap.o endif +obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM) += tm.o + obj-$(CONFIG_PPC64) += $(obj64-y) obj-$(CONFIG_PPC32) += $(obj32-y) @@ -142,6 +143,7 @@ GCOV_PROFILE_kprobes.o := n extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_ALTIVEC) += vector.o extra-$(CONFIG_PPC64) += entry_64.o +extra-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o extra-y += systbl_chk.i $(obj)/systbl.o: systbl_chk diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 4e23ba2..7811903 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -77,6 +77,7 @@ int main(void) DEFINE(NMI_MASK, NMI_MASK); DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr)); DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit)); + DEFINE(TASKTHREADPPR, offsetof(struct task_struct, thread.ppr)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ @@ -121,6 +122,34 @@ int main(void) DEFINE(THREAD_KVM_VCPU, offsetof(struct thread_struct, kvm_vcpu)); #endif +#ifdef CONFIG_PPC_BOOK3S_64 + DEFINE(THREAD_TAR, offsetof(struct thread_struct, tar)); +#endif +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + DEFINE(PACATMSCRATCH, offsetof(struct paca_struct, tm_scratch)); + DEFINE(THREAD_TM_TFHAR, offsetof(struct thread_struct, tm_tfhar)); + DEFINE(THREAD_TM_TEXASR, offsetof(struct thread_struct, tm_texasr)); + DEFINE(THREAD_TM_TFIAR, offsetof(struct thread_struct, tm_tfiar)); + DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs)); + DEFINE(THREAD_TRANSACT_VR0, offsetof(struct thread_struct, + transact_vr[0])); + DEFINE(THREAD_TRANSACT_VSCR, offsetof(struct thread_struct, + transact_vscr)); + DEFINE(THREAD_TRANSACT_VRSAVE, offsetof(struct thread_struct, + transact_vrsave)); + DEFINE(THREAD_TRANSACT_FPR0, offsetof(struct thread_struct, + transact_fpr[0])); + DEFINE(THREAD_TRANSACT_FPSCR, offsetof(struct thread_struct, + transact_fpscr)); +#ifdef CONFIG_VSX + DEFINE(THREAD_TRANSACT_VSR0, offsetof(struct thread_struct, + transact_fpr[0])); +#endif + /* Local pt_regs on stack for Transactional Memory funcs. */ + DEFINE(TM_FRAME_SIZE, STACK_FRAME_OVERHEAD + + sizeof(struct pt_regs) + 16); +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags)); DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); @@ -474,6 +503,7 @@ int main(void) DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst)); DEFINE(VCPU_TRAP, offsetof(struct kvm_vcpu, arch.trap)); DEFINE(VCPU_PTID, offsetof(struct kvm_vcpu, arch.ptid)); + DEFINE(VCPU_CFAR, offsetof(struct kvm_vcpu, arch.cfar)); DEFINE(VCORE_ENTRY_EXIT, offsetof(struct kvmppc_vcore, entry_exit_count)); DEFINE(VCORE_NAP_COUNT, offsetof(struct kvmppc_vcore, nap_count)); DEFINE(VCORE_IN_GUEST, offsetof(struct kvmppc_vcore, in_guest)); @@ -553,6 +583,10 @@ int main(void) DEFINE(IPI_PRIORITY, IPI_PRIORITY); #endif /* CONFIG_KVM_BOOK3S_64_HV */ +#ifdef CONFIG_PPC_BOOK3S_64 + HSTATE_FIELD(HSTATE_CFAR, cfar); +#endif /* CONFIG_PPC_BOOK3S_64 */ + #else /* CONFIG_PPC_BOOK3S */ DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr)); DEFINE(VCPU_XER, offsetof(struct kvm_vcpu, arch.xer)); diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S index 57cf140..d29facb 100644 --- a/arch/powerpc/kernel/cpu_setup_power.S +++ b/arch/powerpc/kernel/cpu_setup_power.S @@ -56,6 +56,7 @@ _GLOBAL(__setup_cpu_power8) mfspr r3,SPRN_LPCR oris r3, r3, LPCR_AIL_3@h bl __init_LPCR + bl __init_FSCR bl __init_TLB mtlr r11 blr @@ -112,6 +113,12 @@ __init_LPCR: isync blr +__init_FSCR: + mfspr r3,SPRN_FSCR + ori r3,r3,FSCR_TAR + mtspr SPRN_FSCR,r3 + blr + __init_TLB: /* Clear the TLB */ li r6,128 diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index a892680..9ebbc24 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -21,7 +21,7 @@ #ifdef CONFIG_SMP void doorbell_setup_this_cpu(void) { - unsigned long tag = mfspr(SPRN_PIR) & 0x3fff; + unsigned long tag = mfspr(SPRN_DOORBELL_CPUTAG) & PPC_DBELL_TAG_MASK; smp_muxed_ipi_set_data(smp_processor_id(), tag); } @@ -30,7 +30,7 @@ void doorbell_cause_ipi(int cpu, unsigned long data) { /* Order previous accesses vs. msgsnd, which is treated as a store */ mb(); - ppc_msgsnd(PPC_DBELL, 0, data); + ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, data); } void doorbell_exception(struct pt_regs *regs) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index ac05701..256c5bf 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -62,8 +62,9 @@ system_call_common: std r12,_MSR(r1) std r0,GPR0(r1) std r10,GPR1(r1) + beq 2f /* if from kernel mode */ ACCOUNT_CPU_USER_ENTRY(r10, r11) - std r2,GPR2(r1) +2: std r2,GPR2(r1) std r3,GPR3(r1) mfcr r2 std r4,GPR4(r1) @@ -226,6 +227,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) beq- 1f ACCOUNT_CPU_USER_EXIT(r11, r12) + HMT_MEDIUM_LOW_HAS_PPR ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ 1: ld r2,GPR2(r1) ld r1,GPR1(r1) @@ -302,6 +304,7 @@ syscall_exit_work: subi r12,r12,TI_FLAGS 4: /* Anything else left to do? */ + SET_DEFAULT_THREAD_PPR(r3, r9) /* Set thread.ppr = 3 */ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) beq .ret_from_except_lite @@ -445,6 +448,19 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR) std r23,_CCR(r1) std r1,KSP(r3) /* Set old stack pointer */ +#ifdef CONFIG_PPC_BOOK3S_64 +BEGIN_FTR_SECTION + /* + * Back up the TAR across context switches. Note that the TAR is not + * available for use in the kernel. (To provide this, the TAR should + * be backed up/restored on exception entry/exit instead, and be in + * pt_regs. FIXME, this should be in pt_regs anyway (for debug).) + */ + mfspr r0,SPRN_TAR + std r0,THREAD_TAR(r3) +END_FTR_SECTION_IFSET(CPU_FTR_BCTAR) +#endif + #ifdef CONFIG_SMP /* We need a sync somewhere here to make sure that if the * previous task gets rescheduled on another CPU, it sees all @@ -527,6 +543,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) +#ifdef CONFIG_PPC_BOOK3S_64 +BEGIN_FTR_SECTION + ld r0,THREAD_TAR(r4) + mtspr SPRN_TAR,r0 +END_FTR_SECTION_IFSET(CPU_FTR_BCTAR) +#endif + #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION ld r0,THREAD_VRSAVE(r4) @@ -762,6 +785,10 @@ fast_exception_return: andc r4,r4,r0 /* r0 contains MSR_RI here */ mtmsrd r4,1 +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* TM debug */ + std r3, PACATMSCRATCH(r13) /* Stash returned-to MSR */ +#endif /* * r13 is our per cpu area, only restore it if we are returning to * userspace the value stored in the stack frame may belong to @@ -770,6 +797,7 @@ fast_exception_return: andi. r0,r3,MSR_PR beq 1f ACCOUNT_CPU_USER_EXIT(r2, r4) + RESTORE_PPR(r2, r4) REST_GPR(13, r1) 1: mtspr SPRN_SRR1,r3 @@ -849,13 +877,22 @@ restore_check_irq_replay: addi r3,r1,STACK_FRAME_OVERHEAD; bl .timer_interrupt b .ret_from_except +#ifdef CONFIG_PPC_DOORBELL +1: #ifdef CONFIG_PPC_BOOK3E -1: cmpwi cr0,r3,0x280 + cmpwi cr0,r3,0x280 +#else + BEGIN_FTR_SECTION + cmpwi cr0,r3,0xe80 + FTR_SECTION_ELSE + cmpwi cr0,r3,0xa00 + ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) +#endif /* CONFIG_PPC_BOOK3E */ bne 1f addi r3,r1,STACK_FRAME_OVERHEAD; bl .doorbell_exception b .ret_from_except -#endif /* CONFIG_PPC_BOOK3E */ +#endif /* CONFIG_PPC_DOORBELL */ 1: b .ret_from_except /* What else to do here ? */ unrecov_restore: diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 4684e33..ae54553 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -159,8 +159,9 @@ exc_##n##_common: \ std r9,GPR9(r1); /* save r9 in stackframe */ \ std r10,_NIP(r1); /* save SRR0 to stackframe */ \ std r11,_MSR(r1); /* save SRR1 to stackframe */ \ + beq 2f; /* if from kernel mode */ \ ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \ - ld r3,excf+EX_R10(r13); /* get back r10 */ \ +2: ld r3,excf+EX_R10(r13); /* get back r10 */ \ ld r4,excf+EX_R11(r13); /* get back r11 */ \ mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \ std r12,GPR12(r1); /* save r12 in stackframe */ \ diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 4665e82..a8a5361 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -104,7 +104,7 @@ __start_interrupts: .globl system_reset_pSeries; system_reset_pSeries: - HMT_MEDIUM; + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) #ifdef CONFIG_PPC_P7_NAP BEGIN_FTR_SECTION @@ -153,12 +153,15 @@ machine_check_pSeries_1: * some code path might still want to branch into the original * vector */ - b machine_check_pSeries + HMT_MEDIUM_PPR_DISCARD + SET_SCRATCH0(r13) /* save r13 */ + EXCEPTION_PROLOG_0(PACA_EXMC) + b machine_check_pSeries_0 . = 0x300 .globl data_access_pSeries data_access_pSeries: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) BEGIN_FTR_SECTION b data_access_check_stab @@ -170,8 +173,9 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) . = 0x380 .globl data_access_slb_pSeries data_access_slb_pSeries: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380) std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR @@ -201,8 +205,9 @@ data_access_slb_pSeries: . = 0x480 .globl instruction_access_slb_pSeries instruction_access_slb_pSeries: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480) std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ @@ -252,7 +257,7 @@ hardware_interrupt_hv: MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer) STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) - STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a) + MASKABLE_EXCEPTION_PSERIES(0xa00, 0xa00, doorbell_super) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00) STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b) @@ -284,16 +289,30 @@ system_call_pSeries: */ . = 0xe00 hv_exception_trampoline: + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b h_data_storage_hv + . = 0xe20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b h_instr_storage_hv + . = 0xe40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b emulation_assist_hv - . = 0xe50 - b hmi_exception_hv + . = 0xe60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b hmi_exception_hv + . = 0xe80 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b h_doorbell_hv + /* We need to deal with the Altivec unavailable exception * here which is at 0xf20, thus in the middle of the * prolog code of the PerformanceMonitor one. A little @@ -301,16 +320,27 @@ hv_exception_trampoline: */ performance_monitor_pSeries_1: . = 0xf00 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b performance_monitor_pSeries altivec_unavailable_pSeries_1: . = 0xf20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b altivec_unavailable_pSeries vsx_unavailable_pSeries_1: . = 0xf40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b vsx_unavailable_pSeries + . = 0xf60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b tm_unavailable_pSeries + #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202) @@ -322,11 +352,9 @@ vsx_unavailable_pSeries_1: . = 0x1500 .global denorm_exception_hv denorm_exception_hv: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD mtspr SPRN_SPRG_HSCRATCH0,r13 - mfspr r13,SPRN_SPRG_HPACA - std r9,PACA_EXGEN+EX_R9(r13) - std r10,PACA_EXGEN+EX_R10(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) std r11,PACA_EXGEN+EX_R11(r13) std r12,PACA_EXGEN+EX_R12(r13) mfspr r9,SPRN_SPRG_HSCRATCH0 @@ -367,10 +395,12 @@ denorm_exception_hv: machine_check_pSeries: .globl machine_check_fwnmi machine_check_fwnmi: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, - EXC_STD, KVMTEST, 0x200) + EXCEPTION_PROLOG_0(PACA_EXMC) +machine_check_pSeries_0: + EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200) + EXCEPTION_PROLOG_PSERIES_1(machine_check_common, EXC_STD) KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200) /* moved from 0x300 */ @@ -496,6 +526,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) + RESTORE_PPR_PACA(PACA_EXGEN, r10) ld r10,PACA_EXGEN+EX_R10(r13) ld r11,PACA_EXGEN+EX_R11(r13) ld r12,PACA_EXGEN+EX_R12(r13) @@ -506,28 +537,34 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) .align 7 /* moved from 0xe00 */ - STD_EXCEPTION_HV(., 0xe02, h_data_storage) + STD_EXCEPTION_HV_OOL(0xe02, h_data_storage) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0xe02) - STD_EXCEPTION_HV(., 0xe22, h_instr_storage) + STD_EXCEPTION_HV_OOL(0xe22, h_instr_storage) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22) - STD_EXCEPTION_HV(., 0xe42, emulation_assist) + STD_EXCEPTION_HV_OOL(0xe42, emulation_assist) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42) - STD_EXCEPTION_HV(., 0xe62, hmi_exception) /* need to flush cache ? */ + STD_EXCEPTION_HV_OOL(0xe62, hmi_exception) /* need to flush cache ? */ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62) + MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82) /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(., 0xf00, performance_monitor) + STD_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf00) - STD_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable) + STD_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf20) - STD_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable) + STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40) + STD_EXCEPTION_PSERIES_OOL(0xf60, tm_unavailable) + KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf60) /* - * An interrupt came in while soft-disabled. We set paca->irq_happened, - * then, if it was a decrementer interrupt, we bump the dec to max and - * and return, else we hard disable and return. This is called with - * r10 containing the value to OR to the paca field. + * An interrupt came in while soft-disabled. We set paca->irq_happened, then: + * - If it was a decrementer interrupt, we bump the dec to max and and return. + * - If it was a doorbell we return immediately since doorbells are edge + * triggered and won't automatically refire. + * - else we hard disable and return. + * This is called with r10 containing the value to OR to the paca field. */ #define MASKED_INTERRUPT(_H) \ masked_##_H##interrupt: \ @@ -535,13 +572,15 @@ masked_##_H##interrupt: \ lbz r11,PACAIRQHAPPENED(r13); \ or r11,r11,r10; \ stb r11,PACAIRQHAPPENED(r13); \ - andi. r10,r10,PACA_IRQ_DEC; \ - beq 1f; \ + cmpwi r10,PACA_IRQ_DEC; \ + bne 1f; \ lis r10,0x7fff; \ ori r10,r10,0xffff; \ mtspr SPRN_DEC,r10; \ b 2f; \ -1: mfspr r10,SPRN_##_H##SRR1; \ +1: cmpwi r10,PACA_IRQ_DBELL; \ + beq 2f; \ + mfspr r10,SPRN_##_H##SRR1; \ rldicl r10,r10,48,1; /* clear MSR_EE */ \ rotldi r10,r10,16; \ mtspr SPRN_##_H##SRR1,r10; \ @@ -558,8 +597,8 @@ masked_##_H##interrupt: \ /* * Called from arch_local_irq_enable when an interrupt needs - * to be resent. r3 contains 0x500 or 0x900 to indicate which - * kind of interrupt. MSR:EE is already off. We generate a + * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate + * which kind of interrupt. MSR:EE is already off. We generate a * stackframe like if a real interrupt had happened. * * Note: While MSR:EE is off, we need to make sure that _MSR @@ -575,9 +614,18 @@ _GLOBAL(__replay_interrupt) mflr r11 mfcr r9 ori r12,r12,MSR_EE - andi. r3,r3,0x0800 - bne decrementer_common - b hardware_interrupt_common + cmpwi r3,0x900 + beq decrementer_common + cmpwi r3,0x500 + beq hardware_interrupt_common +BEGIN_FTR_SECTION + cmpwi r3,0xe80 + beq h_doorbell_common +FTR_SECTION_ELSE + cmpwi r3,0xa00 + beq doorbell_super_common +ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) + blr #ifdef CONFIG_PPC_PSERIES /* @@ -586,7 +634,7 @@ _GLOBAL(__replay_interrupt) .globl system_reset_fwnmi .align 7 system_reset_fwnmi: - HMT_MEDIUM + HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD, NOTEST, 0x100) @@ -651,12 +699,21 @@ machine_check_common: STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) - STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) +#ifdef CONFIG_PPC_DOORBELL + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception) +#else + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception) +#endif STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception) STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) +#ifdef CONFIG_PPC_DOORBELL + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception) +#else + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception) +#endif STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception) STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception) @@ -690,8 +747,8 @@ machine_check_common: . = 0x4380 .globl data_access_slb_relon_pSeries data_access_slb_relon_pSeries: - HMT_MEDIUM SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380) std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR @@ -715,8 +772,8 @@ data_access_slb_relon_pSeries: . = 0x4480 .globl instruction_access_slb_relon_pSeries instruction_access_slb_relon_pSeries: - HMT_MEDIUM SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXSLB) EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480) std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ @@ -746,6 +803,7 @@ hardware_interrupt_relon_hv: STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable) MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer) STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer) + MASKABLE_RELON_EXCEPTION_PSERIES(0x4a00, 0xa00, doorbell_super) STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b) . = 0x4c00 @@ -759,56 +817,64 @@ system_call_relon_pSeries: STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step) . = 0x4e00 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b h_data_storage_relon_hv . = 0x4e20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b h_instr_storage_relon_hv . = 0x4e40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b emulation_assist_relon_hv - . = 0x4e50 - b hmi_exception_relon_hv - . = 0x4e60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b hmi_exception_relon_hv - /* For when we support the doorbell interrupt: - STD_RELON_EXCEPTION_HYPERVISOR(0x4e80, 0xe80, doorbell_hyper) - */ + . = 0x4e80 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b h_doorbell_relon_hv performance_monitor_relon_pSeries_1: . = 0x4f00 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b performance_monitor_relon_pSeries altivec_unavailable_relon_pSeries_1: . = 0x4f20 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b altivec_unavailable_relon_pSeries vsx_unavailable_relon_pSeries_1: . = 0x4f40 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) b vsx_unavailable_relon_pSeries -#ifdef CONFIG_CBE_RAS - STD_RELON_EXCEPTION_HV(0x5200, 0x1202, cbe_system_error) -#endif /* CONFIG_CBE_RAS */ +tm_unavailable_relon_pSeries_1: + . = 0x4f60 + SET_SCRATCH0(r13) + EXCEPTION_PROLOG_0(PACA_EXGEN) + b tm_unavailable_relon_pSeries + STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint) #ifdef CONFIG_PPC_DENORMALISATION . = 0x5500 b denorm_exception_hv #endif -#ifdef CONFIG_CBE_RAS - STD_RELON_EXCEPTION_HV(0x5600, 0x1602, cbe_maintenance) -#else #ifdef CONFIG_HVC_SCOM STD_RELON_EXCEPTION_HV(0x5600, 0x1600, maintence_interrupt) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1600) #endif /* CONFIG_HVC_SCOM */ -#endif /* CONFIG_CBE_RAS */ STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist) -#ifdef CONFIG_CBE_RAS - STD_RELON_EXCEPTION_HV(0x5800, 0x1802, cbe_thermal) -#endif /* CONFIG_CBE_RAS */ /* Other future vectors */ .align 7 @@ -1036,6 +1102,7 @@ _GLOBAL(slb_miss_realmode) mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ .machine pop + RESTORE_PPR_PACA(PACA_EXSLB, r9) ld r9,PACA_EXSLB+EX_R9(r13) ld r10,PACA_EXSLB+EX_R10(r13) ld r11,PACA_EXSLB+EX_R11(r13) @@ -1109,9 +1176,26 @@ fp_unavailable_common: addi r3,r1,STACK_FRAME_OVERHEAD bl .kernel_fp_unavailable_exception BUG_OPCODE -1: bl .load_up_fpu +1: +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +BEGIN_FTR_SECTION + /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in + * transaction), go do TM stuff + */ + rldicl. r0, r12, (64-MSR_TS_LG), (64-2) + bne- 2f +END_FTR_SECTION_IFSET(CPU_FTR_TM) +#endif + bl .load_up_fpu b fast_exception_return - +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +2: /* User process was in a transaction */ + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .fp_unavailable_tm + b .ret_from_except +#endif .align 7 .globl altivec_unavailable_common altivec_unavailable_common: @@ -1119,8 +1203,25 @@ altivec_unavailable_common: #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION beq 1f +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + BEGIN_FTR_SECTION_NESTED(69) + /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in + * transaction), go do TM stuff + */ + rldicl. r0, r12, (64-MSR_TS_LG), (64-2) + bne- 2f + END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) +#endif bl .load_up_altivec b fast_exception_return +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +2: /* User process was in a transaction */ + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .altivec_unavailable_tm + b .ret_from_except +#endif 1: END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif @@ -1137,7 +1238,24 @@ vsx_unavailable_common: #ifdef CONFIG_VSX BEGIN_FTR_SECTION beq 1f +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + BEGIN_FTR_SECTION_NESTED(69) + /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in + * transaction), go do TM stuff + */ + rldicl. r0, r12, (64-MSR_TS_LG), (64-2) + bne- 2f + END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) +#endif b .load_up_vsx +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +2: /* User process was in a transaction */ + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .vsx_unavailable_tm + b .ret_from_except +#endif 1: END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif @@ -1148,9 +1266,75 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) b .ret_from_except .align 7 + .globl tm_unavailable_common +tm_unavailable_common: + EXCEPTION_PROLOG_COMMON(0xf60, PACA_EXGEN) + bl .save_nvgprs + DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD + bl .tm_unavailable_exception + b .ret_from_except + + .align 7 .globl __end_handlers __end_handlers: + /* Equivalents to the above handlers for relocation-on interrupt vectors */ + STD_RELON_EXCEPTION_HV_OOL(0xe00, h_data_storage) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00) + STD_RELON_EXCEPTION_HV_OOL(0xe20, h_instr_storage) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20) + STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40) + STD_RELON_EXCEPTION_HV_OOL(0xe60, hmi_exception) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60) + MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell) + KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe80) + + STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, tm_unavailable) + +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) +/* + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. + */ + .= 0x7000 + .globl fwnmi_data_area +fwnmi_data_area: + + /* pseries and powernv need to keep the whole page from + * 0x7000 to 0x8000 free for use by the firmware + */ + . = 0x8000 +#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ + +/* Space for CPU0's segment table */ + .balign 4096 + .globl initial_stab +initial_stab: + .space 4096 + +#ifdef CONFIG_PPC_POWERNV +_GLOBAL(opal_mc_secondary_handler) + HMT_MEDIUM_PPR_DISCARD + SET_SCRATCH0(r13) + GET_PACA(r13) + clrldi r3,r3,2 + tovirt(r3,r3) + std r3,PACA_OPAL_MC_EVT(r13) + ld r13,OPAL_MC_SRR0(r3) + mtspr SPRN_SRR0,r13 + ld r13,OPAL_MC_SRR1(r3) + mtspr SPRN_SRR1,r13 + ld r3,OPAL_MC_GPR3(r3) + GET_SCRATCH0(r13) + b machine_check_pSeries +#endif /* CONFIG_PPC_POWERNV */ + + /* * Hash table stuff */ @@ -1222,7 +1406,7 @@ handle_dabr_fault: ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_dabr + bl .do_break 12: b .ret_from_except_lite @@ -1344,56 +1528,3 @@ _GLOBAL(do_stab_bolted) ld r13,PACA_EXSLB+EX_R13(r13) rfid b . /* prevent speculative execution */ - - - /* Equivalents to the above handlers for relocation-on interrupt vectors */ - STD_RELON_EXCEPTION_HV(., 0xe00, h_data_storage) - KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00) - STD_RELON_EXCEPTION_HV(., 0xe20, h_instr_storage) - KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20) - STD_RELON_EXCEPTION_HV(., 0xe40, emulation_assist) - KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40) - STD_RELON_EXCEPTION_HV(., 0xe60, hmi_exception) - KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60) - - STD_RELON_EXCEPTION_PSERIES(., 0xf00, performance_monitor) - STD_RELON_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable) - STD_RELON_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable) - -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - - /* pseries and powernv need to keep the whole page from - * 0x7000 to 0x8000 free for use by the firmware - */ - . = 0x8000 -#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ - -/* Space for CPU0's segment table */ - .balign 4096 - .globl initial_stab -initial_stab: - .space 4096 - -#ifdef CONFIG_PPC_POWERNV -_GLOBAL(opal_mc_secondary_handler) - HMT_MEDIUM - SET_SCRATCH0(r13) - GET_PACA(r13) - clrldi r3,r3,2 - tovirt(r3,r3) - std r3,PACA_OPAL_MC_EVT(r13) - ld r13,OPAL_MC_SRR0(r3) - mtspr SPRN_SRR0,r13 - ld r13,OPAL_MC_SRR1(r3) - mtspr SPRN_SRR1,r13 - ld r3,OPAL_MC_GPR3(r3) - GET_SCRATCH0(r13) - b machine_check_pSeries -#endif /* CONFIG_PPC_POWERNV */ diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index e0ada05..caeaabf 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -35,6 +35,15 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ 2: REST_32VSRS(n,c,base); \ 3: +#define __REST_32FPVSRS_TRANSACT(n,c,base) \ +BEGIN_FTR_SECTION \ + b 2f; \ +END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ + REST_32FPRS_TRANSACT(n,base); \ + b 3f; \ +2: REST_32VSRS_TRANSACT(n,c,base); \ +3: + #define __SAVE_32FPVSRS(n,c,base) \ BEGIN_FTR_SECTION \ b 2f; \ @@ -45,11 +54,68 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ 3: #else #define __REST_32FPVSRS(n,b,base) REST_32FPRS(n, base) +#define __REST_32FPVSRS_TRANSACT(n,b,base) REST_32FPRS(n, base) #define __SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base) #endif #define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base) +#define REST_32FPVSRS_TRANSACT(n,c,base) \ + __REST_32FPVSRS_TRANSACT(n,__REG_##c,__REG_##base) #define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base) +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * Wrapper to call load_up_fpu from C. + * void do_load_up_fpu(struct pt_regs *regs); + */ +_GLOBAL(do_load_up_fpu) + mflr r0 + std r0, 16(r1) + stdu r1, -112(r1) + + subi r6, r3, STACK_FRAME_OVERHEAD + /* load_up_fpu expects r12=MSR, r13=PACA, and returns + * with r12 = new MSR. + */ + ld r12,_MSR(r6) + GET_PACA(r13) + + bl load_up_fpu + std r12,_MSR(r6) + + ld r0, 112+16(r1) + addi r1, r1, 112 + mtlr r0 + blr + + +/* void do_load_up_transact_fpu(struct thread_struct *thread) + * + * This is similar to load_up_fpu but for the transactional version of the FP + * register set. It doesn't mess with the task MSR or valid flags. + * Furthermore, we don't do lazy FP with TM currently. + */ +_GLOBAL(do_load_up_transact_fpu) + mfmsr r6 + ori r5,r6,MSR_FP +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r5,r5,MSR_VSX@h +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif + SYNC + MTMSRD(r5) + + lfd fr0,THREAD_TRANSACT_FPSCR(r3) + MTFSF_L(fr0) + REST_32FPVSRS_TRANSACT(0, R4, R3) + + /* FP/VSX off again */ + MTMSRD(r6) + SYNC + + blr +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + /* * This task wants to use the FPU now. * On UP, disable FP for the task which had the FPU previously, diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 4989661..8a9b6f5 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -430,30 +430,18 @@ label: EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE) /* 0x1000 - Programmable Interval Timer (PIT) Exception */ - START_EXCEPTION(0x1000, Decrementer) - NORMAL_EXCEPTION_PROLOG - lis r0,TSR_PIS@h - mtspr SPRN_TSR,r0 /* Clear the PIT exception */ - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_LITE(0x1000, timer_interrupt) - -#if 0 -/* NOTE: - * FIT and WDT handlers are not implemented yet. - */ + . = 0x1000 + b Decrementer /* 0x1010 - Fixed Interval Timer (FIT) Exception */ - STND_EXCEPTION(0x1010, FITException, unknown_exception) + . = 0x1010 + b FITException /* 0x1020 - Watchdog Timer (WDT) Exception */ -#ifdef CONFIG_BOOKE_WDT - CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException) -#else - CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception) -#endif -#endif + . = 0x1020 + b WDTException /* 0x1100 - Data TLB Miss Exception * As the name implies, translation is not in the MMU, so search the @@ -738,6 +726,29 @@ label: (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) + /* Programmable Interval Timer (PIT) Exception. (from 0x1000) */ +Decrementer: + NORMAL_EXCEPTION_PROLOG + lis r0,TSR_PIS@h + mtspr SPRN_TSR,r0 /* Clear the PIT exception */ + addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_LITE(0x1000, timer_interrupt) + + /* Fixed Interval Timer (FIT) Exception. (from 0x1010) */ +FITException: + NORMAL_EXCEPTION_PROLOG + addi r3,r1,STACK_FRAME_OVERHEAD; + EXC_XFER_EE(0x1010, unknown_exception) + + /* Watchdog Timer (WDT) Exception. (from 0x1020) */ +WDTException: + CRITICAL_EXCEPTION_PROLOG; + addi r3,r1,STACK_FRAME_OVERHEAD; + EXC_XFER_TEMPLATE(WatchdogException, 0x1020+2, + (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), + NOCOPY, crit_transfer_to_handler, + ret_from_crit_exc) + /* * The other Data TLB exceptions bail out to this point * if they can't resolve the lightweight TLB fault. diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 116f086..0886ae6 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -122,6 +122,8 @@ __secondary_hold: #endif /* Grab our physical cpu number */ mr r24,r3 + /* stash r4 for book3e */ + mr r25,r4 /* Tell the master cpu we're here */ /* Relocation is off & we are located at an address less */ @@ -129,16 +131,31 @@ __secondary_hold: std r24,__secondary_hold_acknowledge-_stext(0) sync + li r26,0 +#ifdef CONFIG_PPC_BOOK3E + tovirt(r26,r26) +#endif /* All secondary cpus wait here until told to start. */ -100: ld r4,__secondary_hold_spinloop-_stext(0) +100: ld r4,__secondary_hold_spinloop-_stext(r26) cmpdi 0,r4,0 beq 100b #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +#ifdef CONFIG_PPC_BOOK3E + tovirt(r4,r4) +#endif ld r4,0(r4) /* deref function descriptor */ mtctr r4 mr r3,r24 + /* + * it may be the case that other platforms have r4 right to + * begin with, this gives us some safety in case it is not + */ +#ifdef CONFIG_PPC_BOOK3E + mr r4,r25 +#else li r4,0 +#endif /* Make sure that patched code is visible */ isync bctr @@ -169,6 +186,7 @@ _GLOBAL(generic_secondary_thread_init) /* get a valid TOC pointer, wherever we're mapped at */ bl .relative_toc + tovirt(r2,r2) #ifdef CONFIG_PPC_BOOK3E /* Book3E initialization */ @@ -195,6 +213,7 @@ _GLOBAL(generic_secondary_smp_init) /* get a valid TOC pointer, wherever we're mapped at */ bl .relative_toc + tovirt(r2,r2) #ifdef CONFIG_PPC_BOOK3E /* Book3E initialization */ @@ -531,6 +550,7 @@ _GLOBAL(pmac_secondary_start) /* get TOC pointer (real address) */ bl .relative_toc + tovirt(r2,r2) /* Copy some CPU settings from CPU 0 */ bl .__restore_cpu_ppc970 @@ -665,6 +685,13 @@ _GLOBAL(enable_64b_mode) * This puts the TOC pointer into r2, offset by 0x8000 (as expected * by the toolchain). It computes the correct value for wherever we * are running at the moment, using position-independent code. + * + * Note: The compiler constructs pointers using offsets from the + * TOC in -mcmodel=medium mode. After we relocate to 0 but before + * the MMU is on we need our TOC to be a virtual address otherwise + * these pointers will be real addresses which may get stored and + * accessed later with the MMU on. We use tovirt() at the call + * sites to handle this. */ _GLOBAL(relative_toc) mflr r0 @@ -681,8 +708,9 @@ p_toc: .llong __toc_start + 0x8000 - 0b * This is where the main kernel code starts. */ _INIT_STATIC(start_here_multiplatform) - /* set up the TOC (real address) */ - bl .relative_toc + /* set up the TOC */ + bl .relative_toc + tovirt(r2,r2) /* Clear out the BSS. It may have been done in prom_init, * already but that's irrelevant since prom_init will soon diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index a89cae4..a949bdf 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -73,7 +73,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) * If so, DABR will be populated in single_step_dabr_instruction(). */ if (current->thread.last_hit_ubp != bp) - set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx); + set_breakpoint(info); return 0; } @@ -97,7 +97,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) } *slot = NULL; - set_dabr(0, 0); + hw_breakpoint_disable(); } /* @@ -127,19 +127,13 @@ int arch_check_bp_in_kernelspace(struct perf_event *bp) int arch_bp_generic_fields(int type, int *gen_bp_type) { - switch (type) { - case DABR_DATA_READ: - *gen_bp_type = HW_BREAKPOINT_R; - break; - case DABR_DATA_WRITE: - *gen_bp_type = HW_BREAKPOINT_W; - break; - case (DABR_DATA_WRITE | DABR_DATA_READ): - *gen_bp_type = (HW_BREAKPOINT_W | HW_BREAKPOINT_R); - break; - default: + *gen_bp_type = 0; + if (type & HW_BRK_TYPE_READ) + *gen_bp_type |= HW_BREAKPOINT_R; + if (type & HW_BRK_TYPE_WRITE) + *gen_bp_type |= HW_BREAKPOINT_W; + if (*gen_bp_type == 0) return -EINVAL; - } return 0; } @@ -148,35 +142,28 @@ int arch_bp_generic_fields(int type, int *gen_bp_type) */ int arch_validate_hwbkpt_settings(struct perf_event *bp) { - int ret = -EINVAL; + int ret = -EINVAL, length_max; struct arch_hw_breakpoint *info = counter_arch_bp(bp); if (!bp) return ret; - switch (bp->attr.bp_type) { - case HW_BREAKPOINT_R: - info->type = DABR_DATA_READ; - break; - case HW_BREAKPOINT_W: - info->type = DABR_DATA_WRITE; - break; - case HW_BREAKPOINT_R | HW_BREAKPOINT_W: - info->type = (DABR_DATA_READ | DABR_DATA_WRITE); - break; - default: + info->type = HW_BRK_TYPE_TRANSLATE; + if (bp->attr.bp_type & HW_BREAKPOINT_R) + info->type |= HW_BRK_TYPE_READ; + if (bp->attr.bp_type & HW_BREAKPOINT_W) + info->type |= HW_BRK_TYPE_WRITE; + if (info->type == HW_BRK_TYPE_TRANSLATE) + /* must set alteast read or write */ return ret; - } - + if (!(bp->attr.exclude_user)) + info->type |= HW_BRK_TYPE_USER; + if (!(bp->attr.exclude_kernel)) + info->type |= HW_BRK_TYPE_KERNEL; + if (!(bp->attr.exclude_hv)) + info->type |= HW_BRK_TYPE_HYP; info->address = bp->attr.bp_addr; info->len = bp->attr.bp_len; - info->dabrx = DABRX_ALL; - if (bp->attr.exclude_user) - info->dabrx &= ~DABRX_USER; - if (bp->attr.exclude_kernel) - info->dabrx &= ~DABRX_KERNEL; - if (bp->attr.exclude_hv) - info->dabrx &= ~DABRX_HYP; /* * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8) @@ -184,8 +171,16 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) * HW_BREAKPOINT_ALIGN by rounding off to the lower address, the * 'symbolsize' should satisfy the check below. */ + length_max = 8; /* DABR */ + if (cpu_has_feature(CPU_FTR_DAWR)) { + length_max = 512 ; /* 64 doublewords */ + /* DAWR region can't cross 512 boundary */ + if ((bp->attr.bp_addr >> 10) != + ((bp->attr.bp_addr + bp->attr.bp_len) >> 10)) + return -EINVAL; + } if (info->len > - (HW_BREAKPOINT_LEN - (info->address & HW_BREAKPOINT_ALIGN))) + (length_max - (info->address & HW_BREAKPOINT_ALIGN))) return -EINVAL; return 0; } @@ -204,7 +199,7 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) info = counter_arch_bp(tsk->thread.last_hit_ubp); regs->msr &= ~MSR_SE; - set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx); + set_breakpoint(info); tsk->thread.last_hit_ubp = NULL; } @@ -222,7 +217,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) unsigned long dar = regs->dar; /* Disable breakpoints during exception handling */ - set_dabr(0, 0); + hw_breakpoint_disable(); /* * The counter may be concurrently released but that can only @@ -255,8 +250,9 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) * we still need to single-step the instruction, but we don't * generate an event. */ - info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) && - (dar - bp->attr.bp_addr < bp->attr.bp_len)); + if (!((bp->attr.bp_addr <= dar) && + (dar - bp->attr.bp_addr < bp->attr.bp_len))) + info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { @@ -285,10 +281,10 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) * As a policy, the callback is invoked in a 'trigger-after-execute' * fashion */ - if (!info->extraneous_interrupt) + if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ)) perf_bp_event(bp, regs); - set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx); + set_breakpoint(info); out: rcu_read_unlock(); return rc; @@ -317,10 +313,10 @@ int __kprobes single_step_dabr_instruction(struct die_args *args) * We shall invoke the user-defined callback function in the single * stepping handler to confirm to 'trigger-after-execute' semantics */ - if (!info->extraneous_interrupt) + if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ)) perf_bp_event(bp, regs); - set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx); + set_breakpoint(info); current->thread.last_hit_ubp = NULL; /* diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index c862fd7..31c4fdc 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -717,6 +717,13 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name) return; } + /* + * In case we have reserved the first bit, we should not emit + * the warning below. + */ + if (tbl->it_offset == 0) + clear_bit(0, tbl->it_map); + /* verify that table contains no entries */ if (!bitmap_empty(tbl->it_map, tbl->it_size)) pr_warn("%s: Unexpected TCEs for %s\n", __func__, node_name); diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 71413f4..4f97fe3 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -122,8 +122,8 @@ static inline notrace int decrementer_check_overflow(void) } /* This is called whenever we are re-enabling interrupts - * and returns either 0 (nothing to do) or 500/900 if there's - * either an EE or a DEC to generate. + * and returns either 0 (nothing to do) or 500/900/280/a00/e80 if + * there's an EE, DEC or DBELL to generate. * * This is called in two contexts: From arch_local_irq_restore() * before soft-enabling interrupts, and from the exception exit @@ -182,6 +182,13 @@ notrace unsigned int __check_irq_replay(void) local_paca->irq_happened &= ~PACA_IRQ_DBELL; if (happened & PACA_IRQ_DBELL) return 0x280; +#else + local_paca->irq_happened &= ~PACA_IRQ_DBELL; + if (happened & PACA_IRQ_DBELL) { + if (cpu_has_feature(CPU_FTR_HVMODE)) + return 0xe80; + return 0xa00; + } #endif /* CONFIG_PPC_BOOK3E */ /* There should be nothing left ! */ diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index a7bc752..5ca82cd 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -199,7 +199,7 @@ static int kgdb_iabr_match(struct pt_regs *regs) return 1; } -static int kgdb_dabr_match(struct pt_regs *regs) +static int kgdb_break_match(struct pt_regs *regs) { if (user_mode(regs)) return 0; @@ -459,7 +459,7 @@ static void *old__debugger; static void *old__debugger_bpt; static void *old__debugger_sstep; static void *old__debugger_iabr_match; -static void *old__debugger_dabr_match; +static void *old__debugger_break_match; static void *old__debugger_fault_handler; int kgdb_arch_init(void) @@ -469,7 +469,7 @@ int kgdb_arch_init(void) old__debugger_bpt = __debugger_bpt; old__debugger_sstep = __debugger_sstep; old__debugger_iabr_match = __debugger_iabr_match; - old__debugger_dabr_match = __debugger_dabr_match; + old__debugger_break_match = __debugger_break_match; old__debugger_fault_handler = __debugger_fault_handler; __debugger_ipi = kgdb_call_nmi_hook; @@ -477,7 +477,7 @@ int kgdb_arch_init(void) __debugger_bpt = kgdb_handle_breakpoint; __debugger_sstep = kgdb_singlestep; __debugger_iabr_match = kgdb_iabr_match; - __debugger_dabr_match = kgdb_dabr_match; + __debugger_break_match = kgdb_break_match; __debugger_fault_handler = kgdb_not_implemented; return 0; @@ -490,6 +490,6 @@ void kgdb_arch_exit(void) __debugger_bpt = old__debugger_bpt; __debugger_sstep = old__debugger_sstep; __debugger_iabr_match = old__debugger_iabr_match; - __debugger_dabr_match = old__debugger_dabr_match; + __debugger_break_match = old__debugger_break_match; __debugger_fault_handler = old__debugger_fault_handler; } diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 7206701..466a290 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -162,6 +162,8 @@ static int kexec_all_irq_disabled = 0; static void kexec_smp_down(void *arg) { local_irq_disable(); + hard_irq_disable(); + mb(); /* make sure our irqs are disabled before we say they are */ get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF; while(kexec_all_irq_disabled == 0) @@ -244,6 +246,8 @@ static void kexec_prepare_cpus(void) wake_offline_cpus(); smp_call_function(kexec_smp_down, NULL, /* wait */0); local_irq_disable(); + hard_irq_disable(); + mb(); /* make sure IRQs are disabled before we say they are */ get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF; @@ -281,6 +285,7 @@ static void kexec_prepare_cpus(void) if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(0, 0); local_irq_disable(); + hard_irq_disable(); } #endif /* SMP */ diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 9f44a77..6ee59a0 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -386,6 +386,14 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, | (value & 0xffff); break; + case R_PPC64_TOC16_LO: + /* Subtract TOC pointer */ + value -= my_r2(sechdrs, me); + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + case R_PPC64_TOC16_DS: /* Subtract TOC pointer */ value -= my_r2(sechdrs, me); @@ -399,6 +407,28 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, | (value & 0xfffc); break; + case R_PPC64_TOC16_LO_DS: + /* Subtract TOC pointer */ + value -= my_r2(sechdrs, me); + if ((value & 3) != 0) { + printk("%s: bad TOC16_LO_DS relocation (%lu)\n", + me->name, value); + return -ENOEXEC; + } + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xfffc) + | (value & 0xfffc); + break; + + case R_PPC64_TOC16_HA: + /* Subtract TOC pointer */ + value -= my_r2(sechdrs, me); + value = ((value + 0x8000) >> 16); + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + case R_PPC_REL24: /* FIXME: Handle weak symbols here --RR */ if (sym->st_shndx == SHN_UNDEF) { diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 07c1269..a7b7430 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -71,10 +71,8 @@ static int of_pci_phb_probe(struct platform_device *dev) eeh_dev_phb_init_dynamic(phb); /* Register devices with EEH */ -#ifdef CONFIG_EEH if (dev->dev.of_node->child) eeh_add_device_tree_early(dev->dev.of_node); -#endif /* CONFIG_EEH */ /* Scan the bus */ pcibios_scan_phb(phb); @@ -88,13 +86,14 @@ static int of_pci_phb_probe(struct platform_device *dev) pcibios_claim_one_bus(phb->bus); /* Finish EEH setup */ -#ifdef CONFIG_EEH eeh_add_device_tree_late(phb->bus); -#endif /* Add probed PCI devices to the device model */ pci_bus_add_devices(phb->bus); + /* sysfs files should only be added after devices are added */ + eeh_add_sysfs_files(phb->bus); + return 0; } diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index cd6da85..f8f2468 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -120,8 +120,6 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = { struct paca_struct *paca; EXPORT_SYMBOL(paca); -struct paca_struct boot_paca; - void __init initialise_paca(struct paca_struct *new_paca, int cpu) { /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7c37379..fa12ae4 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1477,11 +1477,14 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus) pcibios_allocate_bus_resources(bus); pcibios_claim_one_bus(bus); + /* Fixup EEH */ + eeh_add_device_tree_late(bus); + /* Add new devices to global lists. Register in proc, sysfs. */ pci_bus_add_devices(bus); - /* Fixup EEH */ - eeh_add_device_tree_late(bus); + /* sysfs files should only be added after devices are added */ + eeh_add_sysfs_files(bus); } EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 8143067..59dd545 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -50,6 +50,7 @@ #include <asm/runlatch.h> #include <asm/syscalls.h> #include <asm/switch_to.h> +#include <asm/tm.h> #include <asm/debug.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> @@ -57,6 +58,13 @@ #include <linux/kprobes.h> #include <linux/kdebug.h> +/* Transactional Memory debug */ +#ifdef TM_DEBUG_SW +#define TM_DEBUG(x...) printk(KERN_INFO x) +#else +#define TM_DEBUG(x...) do { } while(0) +#endif + extern unsigned long _get_SP(void); #ifndef CONFIG_SMP @@ -271,7 +279,7 @@ void do_send_trap(struct pt_regs *regs, unsigned long address, force_sig_info(SIGTRAP, &info, current); } #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ -void do_dabr(struct pt_regs *regs, unsigned long address, +void do_break (struct pt_regs *regs, unsigned long address, unsigned long error_code) { siginfo_t info; @@ -281,11 +289,11 @@ void do_dabr(struct pt_regs *regs, unsigned long address, 11, SIGSEGV) == NOTIFY_STOP) return; - if (debugger_dabr_match(regs)) + if (debugger_break_match(regs)) return; - /* Clear the DABR */ - set_dabr(0, 0); + /* Clear the breakpoint */ + hw_breakpoint_disable(); /* Deliver the signal to userspace */ info.si_signo = SIGTRAP; @@ -296,7 +304,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address, } #endif /* CONFIG_PPC_ADV_DEBUG_REGS */ -static DEFINE_PER_CPU(unsigned long, current_dabr); +static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk); #ifdef CONFIG_PPC_ADV_DEBUG_REGS /* @@ -364,39 +372,214 @@ static void switch_booke_debug_regs(struct thread_struct *new_thread) #ifndef CONFIG_HAVE_HW_BREAKPOINT static void set_debug_reg_defaults(struct thread_struct *thread) { - if (thread->dabr) { - thread->dabr = 0; - thread->dabrx = 0; - set_dabr(0, 0); - } + thread->hw_brk.address = 0; + thread->hw_brk.type = 0; + set_breakpoint(&thread->hw_brk); } #endif /* !CONFIG_HAVE_HW_BREAKPOINT */ #endif /* CONFIG_PPC_ADV_DEBUG_REGS */ -int set_dabr(unsigned long dabr, unsigned long dabrx) -{ - __get_cpu_var(current_dabr) = dabr; - - if (ppc_md.set_dabr) - return ppc_md.set_dabr(dabr, dabrx); - - /* XXX should we have a CPU_FTR_HAS_DABR ? */ #ifdef CONFIG_PPC_ADV_DEBUG_REGS +static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) +{ mtspr(SPRN_DAC1, dabr); #ifdef CONFIG_PPC_47x isync(); #endif + return 0; +} #elif defined(CONFIG_PPC_BOOK3S) +static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) +{ mtspr(SPRN_DABR, dabr); mtspr(SPRN_DABRX, dabrx); + return 0; +} +#else +static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) +{ + return -EINVAL; +} #endif + +static inline int set_dabr(struct arch_hw_breakpoint *brk) +{ + unsigned long dabr, dabrx; + + dabr = brk->address | (brk->type & HW_BRK_TYPE_DABR); + dabrx = ((brk->type >> 3) & 0x7); + + if (ppc_md.set_dabr) + return ppc_md.set_dabr(dabr, dabrx); + + return __set_dabr(dabr, dabrx); +} + +static inline int set_dawr(struct arch_hw_breakpoint *brk) +{ + unsigned long dawr, dawrx, mrd; + + dawr = brk->address; + + dawrx = (brk->type & (HW_BRK_TYPE_READ | HW_BRK_TYPE_WRITE)) \ + << (63 - 58); //* read/write bits */ + dawrx |= ((brk->type & (HW_BRK_TYPE_TRANSLATE)) >> 2) \ + << (63 - 59); //* translate */ + dawrx |= (brk->type & (HW_BRK_TYPE_PRIV_ALL)) \ + >> 3; //* PRIM bits */ + /* dawr length is stored in field MDR bits 48:53. Matches range in + doublewords (64 bits) baised by -1 eg. 0b000000=1DW and + 0b111111=64DW. + brk->len is in bytes. + This aligns up to double word size, shifts and does the bias. + */ + mrd = ((brk->len + 7) >> 3) - 1; + dawrx |= (mrd & 0x3f) << (63 - 53); + + if (ppc_md.set_dawr) + return ppc_md.set_dawr(dawr, dawrx); + mtspr(SPRN_DAWR, dawr); + mtspr(SPRN_DAWRX, dawrx); return 0; } +int set_breakpoint(struct arch_hw_breakpoint *brk) +{ + __get_cpu_var(current_brk) = *brk; + + if (cpu_has_feature(CPU_FTR_DAWR)) + return set_dawr(brk); + + return set_dabr(brk); +} + #ifdef CONFIG_PPC64 DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array); #endif +static inline bool hw_brk_match(struct arch_hw_breakpoint *a, + struct arch_hw_breakpoint *b) +{ + if (a->address != b->address) + return false; + if (a->type != b->type) + return false; + if (a->len != b->len) + return false; + return true; +} +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static inline void tm_reclaim_task(struct task_struct *tsk) +{ + /* We have to work out if we're switching from/to a task that's in the + * middle of a transaction. + * + * In switching we need to maintain a 2nd register state as + * oldtask->thread.ckpt_regs. We tm_reclaim(oldproc); this saves the + * checkpointed (tbegin) state in ckpt_regs and saves the transactional + * (current) FPRs into oldtask->thread.transact_fpr[]. + * + * We also context switch (save) TFHAR/TEXASR/TFIAR in here. + */ + struct thread_struct *thr = &tsk->thread; + + if (!thr->regs) + return; + + if (!MSR_TM_ACTIVE(thr->regs->msr)) + goto out_and_saveregs; + + /* Stash the original thread MSR, as giveup_fpu et al will + * modify it. We hold onto it to see whether the task used + * FP & vector regs. + */ + thr->tm_orig_msr = thr->regs->msr; + + TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, " + "ccr=%lx, msr=%lx, trap=%lx)\n", + tsk->pid, thr->regs->nip, + thr->regs->ccr, thr->regs->msr, + thr->regs->trap); + + tm_reclaim(thr, thr->regs->msr, TM_CAUSE_RESCHED); + + TM_DEBUG("--- tm_reclaim on pid %d complete\n", + tsk->pid); + +out_and_saveregs: + /* Always save the regs here, even if a transaction's not active. + * This context-switches a thread's TM info SPRs. We do it here to + * be consistent with the restore path (in recheckpoint) which + * cannot happen later in _switch(). + */ + tm_save_sprs(thr); +} + +static inline void tm_recheckpoint_new_task(struct task_struct *new) +{ + unsigned long msr; + + if (!cpu_has_feature(CPU_FTR_TM)) + return; + + /* Recheckpoint the registers of the thread we're about to switch to. + * + * If the task was using FP, we non-lazily reload both the original and + * the speculative FP register states. This is because the kernel + * doesn't see if/when a TM rollback occurs, so if we take an FP + * unavoidable later, we are unable to determine which set of FP regs + * need to be restored. + */ + if (!new->thread.regs) + return; + + /* The TM SPRs are restored here, so that TEXASR.FS can be set + * before the trecheckpoint and no explosion occurs. + */ + tm_restore_sprs(&new->thread); + + if (!MSR_TM_ACTIVE(new->thread.regs->msr)) + return; + msr = new->thread.tm_orig_msr; + /* Recheckpoint to restore original checkpointed register state. */ + TM_DEBUG("*** tm_recheckpoint of pid %d " + "(new->msr 0x%lx, new->origmsr 0x%lx)\n", + new->pid, new->thread.regs->msr, msr); + + /* This loads the checkpointed FP/VEC state, if used */ + tm_recheckpoint(&new->thread, msr); + + /* This loads the speculative FP/VEC state, if used */ + if (msr & MSR_FP) { + do_load_up_transact_fpu(&new->thread); + new->thread.regs->msr |= + (MSR_FP | new->thread.fpexc_mode); + } + if (msr & MSR_VEC) { + do_load_up_transact_altivec(&new->thread); + new->thread.regs->msr |= MSR_VEC; + } + /* We may as well turn on VSX too since all the state is restored now */ + if (msr & MSR_VSX) + new->thread.regs->msr |= MSR_VSX; + + TM_DEBUG("*** tm_recheckpoint of pid %d complete " + "(kernel msr 0x%lx)\n", + new->pid, mfmsr()); +} + +static inline void __switch_to_tm(struct task_struct *prev) +{ + if (cpu_has_feature(CPU_FTR_TM)) { + tm_enable(); + tm_reclaim_task(prev); + } +} +#else +#define tm_recheckpoint_new_task(new) +#define __switch_to_tm(prev) +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *new) { @@ -407,6 +590,8 @@ struct task_struct *__switch_to(struct task_struct *prev, struct ppc64_tlb_batch *batch; #endif + __switch_to_tm(prev); + #ifdef CONFIG_SMP /* avoid complexity of lazy save/restore of fpu * by just saving it every time we switch out if @@ -481,8 +666,8 @@ struct task_struct *__switch_to(struct task_struct *prev, * schedule DABR */ #ifndef CONFIG_HAVE_HW_BREAKPOINT - if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) - set_dabr(new->thread.dabr, new->thread.dabrx); + if (unlikely(hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk))) + set_breakpoint(&new->thread.hw_brk); #endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif @@ -522,6 +707,9 @@ struct task_struct *__switch_to(struct task_struct *prev, * of sync. Hard disable here. */ hard_irq_disable(); + + tm_recheckpoint_new_task(new); + last = _switch(old_thread, new_thread); #ifdef CONFIG_PPC_BOOK3S_64 @@ -683,6 +871,9 @@ void show_regs(struct pt_regs * regs) printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip); printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link); #endif +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + printk("PACATMSCRATCH [%llx]\n", get_paca()->tm_scratch); +#endif show_stack(current, (unsigned long *) regs->gpr[1]); if (!user_mode(regs)) show_instructions(regs); @@ -813,6 +1004,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, p->thread.dscr_inherit = current->thread.dscr_inherit; p->thread.dscr = current->thread.dscr; } + if (cpu_has_feature(CPU_FTR_HAS_PPR)) + p->thread.ppr = INIT_PPR; #endif /* * The PPC64 ABI makes use of a TOC to contain function @@ -892,7 +1085,6 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) regs->msr = MSR_USER32; } #endif - discard_lazy_cpu_state(); #ifdef CONFIG_VSX current->thread.used_vsr = 0; @@ -912,6 +1104,13 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) current->thread.spefscr = 0; current->thread.used_spe = 0; #endif /* CONFIG_SPE */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (cpu_has_feature(CPU_FTR_TM)) + regs->msr |= MSR_TM; + current->thread.tm_tfhar = 0; + current->thread.tm_texasr = 0; + current->thread.tm_tfiar = 0; +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ } #define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 779f340..7f7fb7f 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -66,8 +66,8 @@ * is running at whatever address it has been loaded at. * On ppc32 we compile with -mrelocatable, which means that references * to extern and static variables get relocated automatically. - * On ppc64 we have to relocate the references explicitly with - * RELOC. (Note that strings count as static variables.) + * ppc64 objects are always relocatable, we just need to relocate the + * TOC. * * Because OF may have mapped I/O devices into the area starting at * KERNELBASE, particularly on CHRP machines, we can't safely call @@ -79,13 +79,11 @@ * On ppc64, 64 bit values are truncated to 32 bits (and * fortunately don't get interpreted as two arguments). */ +#define ADDR(x) (u32)(unsigned long)(x) + #ifdef CONFIG_PPC64 -#define RELOC(x) (*PTRRELOC(&(x))) -#define ADDR(x) (u32) add_reloc_offset((unsigned long)(x)) #define OF_WORKAROUNDS 0 #else -#define RELOC(x) (x) -#define ADDR(x) (u32) (x) #define OF_WORKAROUNDS of_workarounds int of_workarounds; #endif @@ -95,7 +93,7 @@ int of_workarounds; #define PROM_BUG() do { \ prom_printf("kernel BUG at %s line 0x%x!\n", \ - RELOC(__FILE__), __LINE__); \ + __FILE__, __LINE__); \ __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \ } while (0) @@ -233,7 +231,7 @@ static int __init call_prom(const char *service, int nargs, int nret, ...) for (i = 0; i < nret; i++) args.args[nargs+i] = 0; - if (enter_prom(&args, RELOC(prom_entry)) < 0) + if (enter_prom(&args, prom_entry) < 0) return PROM_ERROR; return (nret > 0) ? args.args[nargs] : 0; @@ -258,7 +256,7 @@ static int __init call_prom_ret(const char *service, int nargs, int nret, for (i = 0; i < nret; i++) args.args[nargs+i] = 0; - if (enter_prom(&args, RELOC(prom_entry)) < 0) + if (enter_prom(&args, prom_entry) < 0) return PROM_ERROR; if (rets != NULL) @@ -272,20 +270,19 @@ static int __init call_prom_ret(const char *service, int nargs, int nret, static void __init prom_print(const char *msg) { const char *p, *q; - struct prom_t *_prom = &RELOC(prom); - if (_prom->stdout == 0) + if (prom.stdout == 0) return; for (p = msg; *p != 0; p = q) { for (q = p; *q != 0 && *q != '\n'; ++q) ; if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); + call_prom("write", 3, 1, prom.stdout, p, q - p); if (*q == 0) break; ++q; - call_prom("write", 3, 1, _prom->stdout, ADDR("\r\n"), 2); + call_prom("write", 3, 1, prom.stdout, ADDR("\r\n"), 2); } } @@ -294,7 +291,6 @@ static void __init prom_print_hex(unsigned long val) { int i, nibbles = sizeof(val)*2; char buf[sizeof(val)*2+1]; - struct prom_t *_prom = &RELOC(prom); for (i = nibbles-1; i >= 0; i--) { buf[i] = (val & 0xf) + '0'; @@ -303,7 +299,7 @@ static void __init prom_print_hex(unsigned long val) val >>= 4; } buf[nibbles] = '\0'; - call_prom("write", 3, 1, _prom->stdout, buf, nibbles); + call_prom("write", 3, 1, prom.stdout, buf, nibbles); } /* max number of decimal digits in an unsigned long */ @@ -312,7 +308,6 @@ static void __init prom_print_dec(unsigned long val) { int i, size; char buf[UL_DIGITS+1]; - struct prom_t *_prom = &RELOC(prom); for (i = UL_DIGITS-1; i >= 0; i--) { buf[i] = (val % 10) + '0'; @@ -322,7 +317,7 @@ static void __init prom_print_dec(unsigned long val) } /* shift stuff down */ size = UL_DIGITS - i; - call_prom("write", 3, 1, _prom->stdout, buf+i, size); + call_prom("write", 3, 1, prom.stdout, buf+i, size); } static void __init prom_printf(const char *format, ...) @@ -331,22 +326,18 @@ static void __init prom_printf(const char *format, ...) va_list args; unsigned long v; long vs; - struct prom_t *_prom = &RELOC(prom); va_start(args, format); -#ifdef CONFIG_PPC64 - format = PTRRELOC(format); -#endif for (p = format; *p != 0; p = q) { for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) ; if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); + call_prom("write", 3, 1, prom.stdout, p, q - p); if (*q == 0) break; if (*q == '\n') { ++q; - call_prom("write", 3, 1, _prom->stdout, + call_prom("write", 3, 1, prom.stdout, ADDR("\r\n"), 2); continue; } @@ -368,7 +359,7 @@ static void __init prom_printf(const char *format, ...) ++q; vs = va_arg(args, int); if (vs < 0) { - prom_print(RELOC("-")); + prom_print("-"); vs = -vs; } prom_print_dec(vs); @@ -389,7 +380,7 @@ static void __init prom_printf(const char *format, ...) ++q; vs = va_arg(args, long); if (vs < 0) { - prom_print(RELOC("-")); + prom_print("-"); vs = -vs; } prom_print_dec(vs); @@ -403,7 +394,6 @@ static void __init prom_printf(const char *format, ...) static unsigned int __init prom_claim(unsigned long virt, unsigned long size, unsigned long align) { - struct prom_t *_prom = &RELOC(prom); if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) { /* @@ -414,21 +404,21 @@ static unsigned int __init prom_claim(unsigned long virt, unsigned long size, prom_arg_t result; ret = call_prom_ret("call-method", 5, 2, &result, - ADDR("claim"), _prom->memory, + ADDR("claim"), prom.memory, align, size, virt); if (ret != 0 || result == -1) return -1; ret = call_prom_ret("call-method", 5, 2, &result, - ADDR("claim"), _prom->mmumap, + ADDR("claim"), prom.mmumap, align, size, virt); if (ret != 0) { call_prom("call-method", 4, 1, ADDR("release"), - _prom->memory, size, virt); + prom.memory, size, virt); return -1; } /* the 0x12 is M (coherence) + PP == read/write */ call_prom("call-method", 6, 1, - ADDR("map"), _prom->mmumap, 0x12, size, virt, virt); + ADDR("map"), prom.mmumap, 0x12, size, virt, virt); return virt; } return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, @@ -437,13 +427,10 @@ static unsigned int __init prom_claim(unsigned long virt, unsigned long size, static void __init __attribute__((noreturn)) prom_panic(const char *reason) { -#ifdef CONFIG_PPC64 - reason = PTRRELOC(reason); -#endif prom_print(reason); /* Do not call exit because it clears the screen on pmac * it also causes some sort of double-fault on early pmacs */ - if (RELOC(of_platform) == PLATFORM_POWERMAC) + if (of_platform == PLATFORM_POWERMAC) asm("trap\n"); /* ToDo: should put up an SRC here on pSeries */ @@ -525,13 +512,13 @@ static int __init prom_setprop(phandle node, const char *nodename, add_string(&p, tohex((u32)(unsigned long) value)); add_string(&p, tohex(valuelen)); add_string(&p, tohex(ADDR(pname))); - add_string(&p, tohex(strlen(RELOC(pname)))); + add_string(&p, tohex(strlen(pname))); add_string(&p, "property"); *p = 0; return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } -/* We can't use the standard versions because of RELOC headaches. */ +/* We can't use the standard versions because of relocation headaches. */ #define isxdigit(c) (('0' <= (c) && (c) <= '9') \ || ('a' <= (c) && (c) <= 'f') \ || ('A' <= (c) && (c) <= 'F')) @@ -598,43 +585,42 @@ unsigned long prom_memparse(const char *ptr, const char **retptr) */ static void __init early_cmdline_parse(void) { - struct prom_t *_prom = &RELOC(prom); const char *opt; char *p; int l = 0; - RELOC(prom_cmd_line[0]) = 0; - p = RELOC(prom_cmd_line); - if ((long)_prom->chosen > 0) - l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1); + prom_cmd_line[0] = 0; + p = prom_cmd_line; + if ((long)prom.chosen > 0) + l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1); #ifdef CONFIG_CMDLINE if (l <= 0 || p[0] == '\0') /* dbl check */ - strlcpy(RELOC(prom_cmd_line), - RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line)); + strlcpy(prom_cmd_line, + CONFIG_CMDLINE, sizeof(prom_cmd_line)); #endif /* CONFIG_CMDLINE */ - prom_printf("command line: %s\n", RELOC(prom_cmd_line)); + prom_printf("command line: %s\n", prom_cmd_line); #ifdef CONFIG_PPC64 - opt = strstr(RELOC(prom_cmd_line), RELOC("iommu=")); + opt = strstr(prom_cmd_line, "iommu="); if (opt) { prom_printf("iommu opt is: %s\n", opt); opt += 6; while (*opt && *opt == ' ') opt++; - if (!strncmp(opt, RELOC("off"), 3)) - RELOC(prom_iommu_off) = 1; - else if (!strncmp(opt, RELOC("force"), 5)) - RELOC(prom_iommu_force_on) = 1; + if (!strncmp(opt, "off", 3)) + prom_iommu_off = 1; + else if (!strncmp(opt, "force", 5)) + prom_iommu_force_on = 1; } #endif - opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); + opt = strstr(prom_cmd_line, "mem="); if (opt) { opt += 4; - RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); + prom_memory_limit = prom_memparse(opt, (const char **)&opt); #ifdef CONFIG_PPC64 /* Align to 16 MB == size of ppc64 large page */ - RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); + prom_memory_limit = ALIGN(prom_memory_limit, 0x1000000); #endif } } @@ -887,7 +873,7 @@ static int __init prom_count_smt_threads(void) type[0] = 0; prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("cpu"))) + if (strcmp(type, "cpu")) continue; /* * There is an entry for each smt thread, each entry being @@ -929,7 +915,7 @@ static void __init prom_send_capabilities(void) * (we assume this is the same for all cores) and use it to * divide NR_CPUS. */ - cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]); + cores = (u32 *)&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]; if (*cores != NR_CPUS) { prom_printf("WARNING ! " "ibm_architecture_vec structure inconsistent: %lu!\n", @@ -1005,21 +991,21 @@ static void __init prom_send_capabilities(void) */ static unsigned long __init alloc_up(unsigned long size, unsigned long align) { - unsigned long base = RELOC(alloc_bottom); + unsigned long base = alloc_bottom; unsigned long addr = 0; if (align) base = _ALIGN_UP(base, align); prom_debug("alloc_up(%x, %x)\n", size, align); - if (RELOC(ram_top) == 0) + if (ram_top == 0) prom_panic("alloc_up() called with mem not initialized\n"); if (align) - base = _ALIGN_UP(RELOC(alloc_bottom), align); + base = _ALIGN_UP(alloc_bottom, align); else - base = RELOC(alloc_bottom); + base = alloc_bottom; - for(; (base + size) <= RELOC(alloc_top); + for(; (base + size) <= alloc_top; base = _ALIGN_UP(base + 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); @@ -1031,14 +1017,14 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) } if (addr == 0) return 0; - RELOC(alloc_bottom) = addr + size; + alloc_bottom = addr + size; prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); + prom_debug(" alloc_bottom : %x\n", alloc_bottom); + prom_debug(" alloc_top : %x\n", alloc_top); + prom_debug(" alloc_top_hi : %x\n", alloc_top_high); + prom_debug(" rmo_top : %x\n", rmo_top); + prom_debug(" ram_top : %x\n", ram_top); return addr; } @@ -1054,32 +1040,32 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align, unsigned long base, addr = 0; prom_debug("alloc_down(%x, %x, %s)\n", size, align, - highmem ? RELOC("(high)") : RELOC("(low)")); - if (RELOC(ram_top) == 0) + highmem ? "(high)" : "(low)"); + if (ram_top == 0) prom_panic("alloc_down() called with mem not initialized\n"); if (highmem) { /* Carve out storage for the TCE table. */ - addr = _ALIGN_DOWN(RELOC(alloc_top_high) - size, align); - if (addr <= RELOC(alloc_bottom)) + addr = _ALIGN_DOWN(alloc_top_high - size, align); + if (addr <= alloc_bottom) return 0; /* Will we bump into the RMO ? If yes, check out that we * didn't overlap existing allocations there, if we did, * we are dead, we must be the first in town ! */ - if (addr < RELOC(rmo_top)) { + if (addr < rmo_top) { /* Good, we are first */ - if (RELOC(alloc_top) == RELOC(rmo_top)) - RELOC(alloc_top) = RELOC(rmo_top) = addr; + if (alloc_top == rmo_top) + alloc_top = rmo_top = addr; else return 0; } - RELOC(alloc_top_high) = addr; + alloc_top_high = addr; goto bail; } - base = _ALIGN_DOWN(RELOC(alloc_top) - size, align); - for (; base > RELOC(alloc_bottom); + base = _ALIGN_DOWN(alloc_top - size, align); + for (; base > alloc_bottom; base = _ALIGN_DOWN(base - 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); @@ -1089,15 +1075,15 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align, } if (addr == 0) return 0; - RELOC(alloc_top) = addr; + alloc_top = addr; bail: prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); + prom_debug(" alloc_bottom : %x\n", alloc_bottom); + prom_debug(" alloc_top : %x\n", alloc_top); + prom_debug(" alloc_top_hi : %x\n", alloc_top_high); + prom_debug(" rmo_top : %x\n", rmo_top); + prom_debug(" ram_top : %x\n", ram_top); return addr; } @@ -1137,7 +1123,7 @@ static unsigned long __init prom_next_cell(int s, cell_t **cellp) static void __init reserve_mem(u64 base, u64 size) { u64 top = base + size; - unsigned long cnt = RELOC(mem_reserve_cnt); + unsigned long cnt = mem_reserve_cnt; if (size == 0) return; @@ -1152,9 +1138,9 @@ static void __init reserve_mem(u64 base, u64 size) if (cnt >= (MEM_RESERVE_MAP_SIZE - 1)) prom_panic("Memory reserve map exhausted !\n"); - RELOC(mem_reserve_map)[cnt].base = base; - RELOC(mem_reserve_map)[cnt].size = size; - RELOC(mem_reserve_cnt) = cnt + 1; + mem_reserve_map[cnt].base = base; + mem_reserve_map[cnt].size = size; + mem_reserve_cnt = cnt + 1; } /* @@ -1167,7 +1153,6 @@ static void __init prom_init_mem(void) char *path, type[64]; unsigned int plen; cell_t *p, *endp; - struct prom_t *_prom = &RELOC(prom); u32 rac, rsc; /* @@ -1176,14 +1161,14 @@ static void __init prom_init_mem(void) * 2) top of memory */ rac = 2; - prom_getprop(_prom->root, "#address-cells", &rac, sizeof(rac)); + prom_getprop(prom.root, "#address-cells", &rac, sizeof(rac)); rsc = 1; - prom_getprop(_prom->root, "#size-cells", &rsc, sizeof(rsc)); + prom_getprop(prom.root, "#size-cells", &rsc, sizeof(rsc)); prom_debug("root_addr_cells: %x\n", (unsigned long) rac); prom_debug("root_size_cells: %x\n", (unsigned long) rsc); prom_debug("scanning memory:\n"); - path = RELOC(prom_scratch); + path = prom_scratch; for (node = 0; prom_next_node(&node); ) { type[0] = 0; @@ -1196,15 +1181,15 @@ static void __init prom_init_mem(void) */ prom_getprop(node, "name", type, sizeof(type)); } - if (strcmp(type, RELOC("memory"))) + if (strcmp(type, "memory")) continue; - plen = prom_getprop(node, "reg", RELOC(regbuf), sizeof(regbuf)); + plen = prom_getprop(node, "reg", regbuf, sizeof(regbuf)); if (plen > sizeof(regbuf)) { prom_printf("memory node too large for buffer !\n"); plen = sizeof(regbuf); } - p = RELOC(regbuf); + p = regbuf; endp = p + (plen / sizeof(cell_t)); #ifdef DEBUG_PROM @@ -1222,14 +1207,14 @@ static void __init prom_init_mem(void) if (size == 0) continue; prom_debug(" %x %x\n", base, size); - if (base == 0 && (RELOC(of_platform) & PLATFORM_LPAR)) - RELOC(rmo_top) = size; - if ((base + size) > RELOC(ram_top)) - RELOC(ram_top) = base + size; + if (base == 0 && (of_platform & PLATFORM_LPAR)) + rmo_top = size; + if ((base + size) > ram_top) + ram_top = base + size; } } - RELOC(alloc_bottom) = PAGE_ALIGN((unsigned long)&RELOC(_end) + 0x4000); + alloc_bottom = PAGE_ALIGN((unsigned long)&_end + 0x4000); /* * If prom_memory_limit is set we reduce the upper limits *except* for @@ -1237,20 +1222,20 @@ static void __init prom_init_mem(void) * TCE's up there. */ - RELOC(alloc_top_high) = RELOC(ram_top); + alloc_top_high = ram_top; - if (RELOC(prom_memory_limit)) { - if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { + if (prom_memory_limit) { + if (prom_memory_limit <= alloc_bottom) { prom_printf("Ignoring mem=%x <= alloc_bottom.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { + prom_memory_limit); + prom_memory_limit = 0; + } else if (prom_memory_limit >= ram_top) { prom_printf("Ignoring mem=%x >= ram_top.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; + prom_memory_limit); + prom_memory_limit = 0; } else { - RELOC(ram_top) = RELOC(prom_memory_limit); - RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); + ram_top = prom_memory_limit; + rmo_top = min(rmo_top, prom_memory_limit); } } @@ -1262,36 +1247,35 @@ static void __init prom_init_mem(void) * Since 768MB is plenty of room, and we need to cap to something * reasonable on 32-bit, cap at 768MB on all machines. */ - if (!RELOC(rmo_top)) - RELOC(rmo_top) = RELOC(ram_top); - RELOC(rmo_top) = min(0x30000000ul, RELOC(rmo_top)); - RELOC(alloc_top) = RELOC(rmo_top); - RELOC(alloc_top_high) = RELOC(ram_top); + if (!rmo_top) + rmo_top = ram_top; + rmo_top = min(0x30000000ul, rmo_top); + alloc_top = rmo_top; + alloc_top_high = ram_top; /* * Check if we have an initrd after the kernel but still inside * the RMO. If we do move our bottom point to after it. */ - if (RELOC(prom_initrd_start) && - RELOC(prom_initrd_start) < RELOC(rmo_top) && - RELOC(prom_initrd_end) > RELOC(alloc_bottom)) - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); + if (prom_initrd_start && + prom_initrd_start < rmo_top && + prom_initrd_end > alloc_bottom) + alloc_bottom = PAGE_ALIGN(prom_initrd_end); prom_printf("memory layout at init:\n"); - prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); - prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); - prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_printf(" rmo_top : %x\n", RELOC(rmo_top)); - prom_printf(" ram_top : %x\n", RELOC(ram_top)); + prom_printf(" memory_limit : %x (16 MB aligned)\n", prom_memory_limit); + prom_printf(" alloc_bottom : %x\n", alloc_bottom); + prom_printf(" alloc_top : %x\n", alloc_top); + prom_printf(" alloc_top_hi : %x\n", alloc_top_high); + prom_printf(" rmo_top : %x\n", rmo_top); + prom_printf(" ram_top : %x\n", ram_top); } static void __init prom_close_stdin(void) { - struct prom_t *_prom = &RELOC(prom); ihandle val; - if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) + if (prom_getprop(prom.chosen, "stdin", &val, sizeof(val)) > 0) call_prom("close", 1, 0, val); } @@ -1332,19 +1316,19 @@ static void __init prom_query_opal(void) } prom_printf("Querying for OPAL presence... "); - rc = opal_query_takeover(&RELOC(prom_opal_size), - &RELOC(prom_opal_align)); + rc = opal_query_takeover(&prom_opal_size, + &prom_opal_align); prom_debug("(rc = %ld) ", rc); if (rc != 0) { prom_printf("not there.\n"); return; } - RELOC(of_platform) = PLATFORM_OPAL; + of_platform = PLATFORM_OPAL; prom_printf(" there !\n"); - prom_debug(" opal_size = 0x%lx\n", RELOC(prom_opal_size)); - prom_debug(" opal_align = 0x%lx\n", RELOC(prom_opal_align)); - if (RELOC(prom_opal_align) < 0x10000) - RELOC(prom_opal_align) = 0x10000; + prom_debug(" opal_size = 0x%lx\n", prom_opal_size); + prom_debug(" opal_align = 0x%lx\n", prom_opal_align); + if (prom_opal_align < 0x10000) + prom_opal_align = 0x10000; } static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...) @@ -1365,8 +1349,8 @@ static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...) for (i = 0; i < nret; ++i) rtas_args.rets[i] = 0; - opal_enter_rtas(&rtas_args, RELOC(prom_rtas_data), - RELOC(prom_rtas_entry)); + opal_enter_rtas(&rtas_args, prom_rtas_data, + prom_rtas_entry); if (nret > 1 && outputs != NULL) for (i = 0; i < nret-1; ++i) @@ -1381,9 +1365,8 @@ static void __init prom_opal_hold_cpus(void) phandle node; char type[64]; u32 servers[8]; - struct prom_t *_prom = &RELOC(prom); - void *entry = (unsigned long *)&RELOC(opal_secondary_entry); - struct opal_secondary_data *data = &RELOC(opal_secondary_data); + void *entry = (unsigned long *)&opal_secondary_entry; + struct opal_secondary_data *data = &opal_secondary_data; prom_debug("prom_opal_hold_cpus: start...\n"); prom_debug(" - entry = 0x%x\n", entry); @@ -1396,12 +1379,12 @@ static void __init prom_opal_hold_cpus(void) for (node = 0; prom_next_node(&node); ) { type[0] = 0; prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("cpu")) != 0) + if (strcmp(type, "cpu") != 0) continue; /* Skip non-configured cpus. */ if (prom_getprop(node, "status", type, sizeof(type)) > 0) - if (strcmp(type, RELOC("okay")) != 0) + if (strcmp(type, "okay") != 0) continue; cnt = prom_getprop(node, "ibm,ppc-interrupt-server#s", servers, @@ -1412,7 +1395,7 @@ static void __init prom_opal_hold_cpus(void) for (i = 0; i < cnt; i++) { cpu = servers[i]; prom_debug("CPU %d ... ", cpu); - if (cpu == _prom->cpu) { + if (cpu == prom.cpu) { prom_debug("booted !\n"); continue; } @@ -1423,7 +1406,7 @@ static void __init prom_opal_hold_cpus(void) * spinloop. */ data->ack = -1; - rc = prom_rtas_call(RELOC(prom_rtas_start_cpu), 3, 1, + rc = prom_rtas_call(prom_rtas_start_cpu, 3, 1, NULL, cpu, entry, data); prom_debug("rtas rc=%d ...", rc); @@ -1443,21 +1426,21 @@ static void __init prom_opal_hold_cpus(void) static void __init prom_opal_takeover(void) { - struct opal_secondary_data *data = &RELOC(opal_secondary_data); + struct opal_secondary_data *data = &opal_secondary_data; struct opal_takeover_args *args = &data->args; - u64 align = RELOC(prom_opal_align); + u64 align = prom_opal_align; u64 top_addr, opal_addr; - args->k_image = (u64)RELOC(_stext); + args->k_image = (u64)_stext; args->k_size = _end - _stext; args->k_entry = 0; args->k_entry2 = 0x60; top_addr = _ALIGN_UP(args->k_size, align); - if (RELOC(prom_initrd_start) != 0) { - args->rd_image = RELOC(prom_initrd_start); - args->rd_size = RELOC(prom_initrd_end) - args->rd_image; + if (prom_initrd_start != 0) { + args->rd_image = prom_initrd_start; + args->rd_size = prom_initrd_end - args->rd_image; args->rd_loc = top_addr; top_addr = _ALIGN_UP(args->rd_loc + args->rd_size, align); } @@ -1469,13 +1452,13 @@ static void __init prom_opal_takeover(void) * has plenty of memory, and we ask for the HAL for now to * be just below the 1G point, or above the initrd */ - opal_addr = _ALIGN_DOWN(0x40000000 - RELOC(prom_opal_size), align); + opal_addr = _ALIGN_DOWN(0x40000000 - prom_opal_size, align); if (opal_addr < top_addr) opal_addr = top_addr; args->hal_addr = opal_addr; /* Copy the command line to the kernel image */ - strlcpy(RELOC(boot_command_line), RELOC(prom_cmd_line), + strlcpy(boot_command_line, prom_cmd_line, COMMAND_LINE_SIZE); prom_debug(" k_image = 0x%lx\n", args->k_image); @@ -1557,8 +1540,8 @@ static void __init prom_instantiate_opal(void) &entry, sizeof(entry)); #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL - RELOC(prom_opal_base) = base; - RELOC(prom_opal_entry) = entry; + prom_opal_base = base; + prom_opal_entry = entry; #endif prom_debug("prom_instantiate_opal: end...\n"); } @@ -1616,9 +1599,9 @@ static void __init prom_instantiate_rtas(void) #ifdef CONFIG_PPC_POWERNV /* PowerVN takeover hack */ - RELOC(prom_rtas_data) = base; - RELOC(prom_rtas_entry) = entry; - prom_getprop(rtas_node, "start-cpu", &RELOC(prom_rtas_start_cpu), 4); + prom_rtas_data = base; + prom_rtas_entry = entry; + prom_getprop(rtas_node, "start-cpu", &prom_rtas_start_cpu, 4); #endif prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1693,20 +1676,20 @@ static void __init prom_initialize_tce_table(void) phandle node; ihandle phb_node; char compatible[64], type[64], model[64]; - char *path = RELOC(prom_scratch); + char *path = prom_scratch; u64 base, align; u32 minalign, minsize; u64 tce_entry, *tce_entryp; u64 local_alloc_top, local_alloc_bottom; u64 i; - if (RELOC(prom_iommu_off)) + if (prom_iommu_off) return; prom_debug("starting prom_initialize_tce_table\n"); /* Cache current top of allocs so we reserve a single block */ - local_alloc_top = RELOC(alloc_top_high); + local_alloc_top = alloc_top_high; local_alloc_bottom = local_alloc_top; /* Search all nodes looking for PHBs. */ @@ -1719,19 +1702,19 @@ static void __init prom_initialize_tce_table(void) prom_getprop(node, "device_type", type, sizeof(type)); prom_getprop(node, "model", model, sizeof(model)); - if ((type[0] == 0) || (strstr(type, RELOC("pci")) == NULL)) + if ((type[0] == 0) || (strstr(type, "pci") == NULL)) continue; /* Keep the old logic intact to avoid regression. */ if (compatible[0] != 0) { - if ((strstr(compatible, RELOC("python")) == NULL) && - (strstr(compatible, RELOC("Speedwagon")) == NULL) && - (strstr(compatible, RELOC("Winnipeg")) == NULL)) + if ((strstr(compatible, "python") == NULL) && + (strstr(compatible, "Speedwagon") == NULL) && + (strstr(compatible, "Winnipeg") == NULL)) continue; } else if (model[0] != 0) { - if ((strstr(model, RELOC("ython")) == NULL) && - (strstr(model, RELOC("peedwagon")) == NULL) && - (strstr(model, RELOC("innipeg")) == NULL)) + if ((strstr(model, "ython") == NULL) && + (strstr(model, "peedwagon") == NULL) && + (strstr(model, "innipeg") == NULL)) continue; } @@ -1810,8 +1793,8 @@ static void __init prom_initialize_tce_table(void) /* These are only really needed if there is a memory limit in * effect, but we don't know so export them always. */ - RELOC(prom_tce_alloc_start) = local_alloc_bottom; - RELOC(prom_tce_alloc_end) = local_alloc_top; + prom_tce_alloc_start = local_alloc_bottom; + prom_tce_alloc_end = local_alloc_top; /* Flag the first invalid entry */ prom_debug("ending prom_initialize_tce_table\n"); @@ -1848,7 +1831,6 @@ static void __init prom_hold_cpus(void) unsigned int reg; phandle node; char type[64]; - struct prom_t *_prom = &RELOC(prom); unsigned long *spinloop = (void *) LOW_ADDR(__secondary_hold_spinloop); unsigned long *acknowledge @@ -1874,12 +1856,12 @@ static void __init prom_hold_cpus(void) for (node = 0; prom_next_node(&node); ) { type[0] = 0; prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("cpu")) != 0) + if (strcmp(type, "cpu") != 0) continue; /* Skip non-configured cpus. */ if (prom_getprop(node, "status", type, sizeof(type)) > 0) - if (strcmp(type, RELOC("okay")) != 0) + if (strcmp(type, "okay") != 0) continue; reg = -1; @@ -1893,7 +1875,7 @@ static void __init prom_hold_cpus(void) */ *acknowledge = (unsigned long)-1; - if (reg != _prom->cpu) { + if (reg != prom.cpu) { /* Primary Thread of non-boot cpu or any thread */ prom_printf("starting cpu hw idx %lu... ", reg); call_prom("start-cpu", 3, 0, node, @@ -1920,22 +1902,20 @@ static void __init prom_hold_cpus(void) static void __init prom_init_client_services(unsigned long pp) { - struct prom_t *_prom = &RELOC(prom); - /* Get a handle to the prom entry point before anything else */ - RELOC(prom_entry) = pp; + prom_entry = pp; /* get a handle for the stdout device */ - _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if (!PHANDLE_VALID(_prom->chosen)) + prom.chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); + if (!PHANDLE_VALID(prom.chosen)) prom_panic("cannot find chosen"); /* msg won't be printed :( */ /* get device tree root */ - _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if (!PHANDLE_VALID(_prom->root)) + prom.root = call_prom("finddevice", 1, 1, ADDR("/")); + if (!PHANDLE_VALID(prom.root)) prom_panic("cannot find device tree root"); /* msg won't be printed :( */ - _prom->mmumap = 0; + prom.mmumap = 0; } #ifdef CONFIG_PPC32 @@ -1946,7 +1926,6 @@ static void __init prom_init_client_services(unsigned long pp) */ static void __init prom_find_mmu(void) { - struct prom_t *_prom = &RELOC(prom); phandle oprom; char version[64]; @@ -1964,10 +1943,10 @@ static void __init prom_find_mmu(void) call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim"); } else return; - _prom->memory = call_prom("open", 1, 1, ADDR("/memory")); - prom_getprop(_prom->chosen, "mmu", &_prom->mmumap, - sizeof(_prom->mmumap)); - if (!IHANDLE_VALID(_prom->memory) || !IHANDLE_VALID(_prom->mmumap)) + prom.memory = call_prom("open", 1, 1, ADDR("/memory")); + prom_getprop(prom.chosen, "mmu", &prom.mmumap, + sizeof(prom.mmumap)); + if (!IHANDLE_VALID(prom.memory) || !IHANDLE_VALID(prom.mmumap)) of_workarounds &= ~OF_WA_CLAIM; /* hmmm */ } #else @@ -1976,36 +1955,34 @@ static void __init prom_find_mmu(void) static void __init prom_init_stdout(void) { - struct prom_t *_prom = &RELOC(prom); - char *path = RELOC(of_stdout_device); + char *path = of_stdout_device; char type[16]; u32 val; - if (prom_getprop(_prom->chosen, "stdout", &val, sizeof(val)) <= 0) + if (prom_getprop(prom.chosen, "stdout", &val, sizeof(val)) <= 0) prom_panic("cannot find stdout"); - _prom->stdout = val; + prom.stdout = val; /* Get the full OF pathname of the stdout device */ memset(path, 0, 256); - call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); - val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "/chosen", "linux,stdout-package", + call_prom("instance-to-path", 3, 1, prom.stdout, path, 255); + val = call_prom("instance-to-package", 1, 1, prom.stdout); + prom_setprop(prom.chosen, "/chosen", "linux,stdout-package", &val, sizeof(val)); - prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "/chosen", "linux,stdout-path", + prom_printf("OF stdout device is: %s\n", of_stdout_device); + prom_setprop(prom.chosen, "/chosen", "linux,stdout-path", path, strlen(path) + 1); /* If it's a display, note it */ memset(type, 0, sizeof(type)); prom_getprop(val, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) == 0) + if (strcmp(type, "display") == 0) prom_setprop(val, path, "linux,boot-display", NULL, 0); } static int __init prom_find_machine_type(void) { - struct prom_t *_prom = &RELOC(prom); char compat[256]; int len, i = 0; #ifdef CONFIG_PPC64 @@ -2014,7 +1991,7 @@ static int __init prom_find_machine_type(void) #endif /* Look for a PowerMac or a Cell */ - len = prom_getprop(_prom->root, "compatible", + len = prom_getprop(prom.root, "compatible", compat, sizeof(compat)-1); if (len > 0) { compat[len] = 0; @@ -2023,16 +2000,16 @@ static int __init prom_find_machine_type(void) int sl = strlen(p); if (sl == 0) break; - if (strstr(p, RELOC("Power Macintosh")) || - strstr(p, RELOC("MacRISC"))) + if (strstr(p, "Power Macintosh") || + strstr(p, "MacRISC")) return PLATFORM_POWERMAC; #ifdef CONFIG_PPC64 /* We must make sure we don't detect the IBM Cell * blades as pSeries due to some firmware issues, * so we do it here. */ - if (strstr(p, RELOC("IBM,CBEA")) || - strstr(p, RELOC("IBM,CPBW-1.0"))) + if (strstr(p, "IBM,CBEA") || + strstr(p, "IBM,CPBW-1.0")) return PLATFORM_GENERIC; #endif /* CONFIG_PPC64 */ i += sl + 1; @@ -2049,11 +2026,11 @@ static int __init prom_find_machine_type(void) * non-IBM designs ! * - it has /rtas */ - len = prom_getprop(_prom->root, "device_type", + len = prom_getprop(prom.root, "device_type", compat, sizeof(compat)-1); if (len <= 0) return PLATFORM_GENERIC; - if (strcmp(compat, RELOC("chrp"))) + if (strcmp(compat, "chrp")) return PLATFORM_GENERIC; /* Default to pSeries. We need to know if we are running LPAR */ @@ -2115,11 +2092,11 @@ static void __init prom_check_displays(void) for (node = 0; prom_next_node(&node); ) { memset(type, 0, sizeof(type)); prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) != 0) + if (strcmp(type, "display") != 0) continue; /* It seems OF doesn't null-terminate the path :-( */ - path = RELOC(prom_scratch); + path = prom_scratch; memset(path, 0, PROM_SCRATCH_SIZE); /* @@ -2143,15 +2120,15 @@ static void __init prom_check_displays(void) /* Setup a usable color table when the appropriate * method is available. Should update this to set-colors */ - clut = RELOC(default_colors); + clut = default_colors; for (i = 0; i < 16; i++, clut += 3) if (prom_set_color(ih, i, clut[0], clut[1], clut[2]) != 0) break; #ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(RELOC(logo_linux_clut224.clut)); - for (i = 0; i < RELOC(logo_linux_clut224.clutsize); i++, clut += 3) + clut = PTRRELOC(logo_linux_clut224.clut); + for (i = 0; i < logo_linux_clut224.clutsize; i++, clut += 3) if (prom_set_color(ih, i + 32, clut[0], clut[1], clut[2]) != 0) break; @@ -2171,8 +2148,8 @@ static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, unsigned long room, chunk; prom_debug("Chunk exhausted, claiming more at %x...\n", - RELOC(alloc_bottom)); - room = RELOC(alloc_top) - RELOC(alloc_bottom); + alloc_bottom); + room = alloc_top - alloc_bottom; if (room > DEVTREE_CHUNK_SIZE) room = DEVTREE_CHUNK_SIZE; if (room < PAGE_SIZE) @@ -2198,9 +2175,9 @@ static unsigned long __init dt_find_string(char *str) { char *s, *os; - s = os = (char *)RELOC(dt_string_start); + s = os = (char *)dt_string_start; s += 4; - while (s < (char *)RELOC(dt_string_end)) { + while (s < (char *)dt_string_end) { if (strcmp(s, str) == 0) return s - os; s += strlen(s) + 1; @@ -2222,10 +2199,10 @@ static void __init scan_dt_build_strings(phandle node, unsigned long soff; phandle child; - sstart = (char *)RELOC(dt_string_start); + sstart = (char *)dt_string_start; /* get and store all property names */ - prev_name = RELOC(""); + prev_name = ""; for (;;) { /* 64 is max len of name including nul. */ namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); @@ -2236,9 +2213,9 @@ static void __init scan_dt_build_strings(phandle node, } /* skip "name" */ - if (strcmp(namep, RELOC("name")) == 0) { + if (strcmp(namep, "name") == 0) { *mem_start = (unsigned long)namep; - prev_name = RELOC("name"); + prev_name = "name"; continue; } /* get/create string entry */ @@ -2249,7 +2226,7 @@ static void __init scan_dt_build_strings(phandle node, } else { /* Trim off some if we can */ *mem_start = (unsigned long)namep + strlen(namep) + 1; - RELOC(dt_string_end) = *mem_start; + dt_string_end = *mem_start; } prev_name = namep; } @@ -2304,35 +2281,35 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, } /* get it again for debugging */ - path = RELOC(prom_scratch); + path = prom_scratch; memset(path, 0, PROM_SCRATCH_SIZE); call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); /* get and store all properties */ - prev_name = RELOC(""); - sstart = (char *)RELOC(dt_string_start); + prev_name = ""; + sstart = (char *)dt_string_start; for (;;) { if (call_prom("nextprop", 3, 1, node, prev_name, - RELOC(pname)) != 1) + pname) != 1) break; /* skip "name" */ - if (strcmp(RELOC(pname), RELOC("name")) == 0) { - prev_name = RELOC("name"); + if (strcmp(pname, "name") == 0) { + prev_name = "name"; continue; } /* find string offset */ - soff = dt_find_string(RELOC(pname)); + soff = dt_find_string(pname); if (soff == 0) { prom_printf("WARNING: Can't find string index for" - " <%s>, node %s\n", RELOC(pname), path); + " <%s>, node %s\n", pname, path); break; } prev_name = sstart + soff; /* get length */ - l = call_prom("getproplen", 2, 1, node, RELOC(pname)); + l = call_prom("getproplen", 2, 1, node, pname); /* sanity checks */ if (l == PROM_ERROR) @@ -2345,10 +2322,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, /* push property content */ valp = make_room(mem_start, mem_end, l, 4); - call_prom("getprop", 4, 1, node, RELOC(pname), valp, l); + call_prom("getprop", 4, 1, node, pname, valp, l); *mem_start = _ALIGN(*mem_start, 4); - if (!strcmp(RELOC(pname), RELOC("phandle"))) + if (!strcmp(pname, "phandle")) has_phandle = 1; } @@ -2356,7 +2333,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, * existed (can happen with OPAL) */ if (!has_phandle) { - soff = dt_find_string(RELOC("linux,phandle")); + soff = dt_find_string("linux,phandle"); if (soff == 0) prom_printf("WARNING: Can't find string index for" " <linux-phandle> node %s\n", path); @@ -2384,7 +2361,6 @@ static void __init flatten_device_tree(void) phandle root; unsigned long mem_start, mem_end, room; struct boot_param_header *hdr; - struct prom_t *_prom = &RELOC(prom); char *namep; u64 *rsvmap; @@ -2392,10 +2368,10 @@ static void __init flatten_device_tree(void) * Check how much room we have between alloc top & bottom (+/- a * few pages), crop to 1MB, as this is our "chunk" size */ - room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000; + room = alloc_top - alloc_bottom - 0x4000; if (room > DEVTREE_CHUNK_SIZE) room = DEVTREE_CHUNK_SIZE; - prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom)); + prom_debug("starting device tree allocs at %x\n", alloc_bottom); /* Now try to claim that */ mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); @@ -2412,66 +2388,66 @@ static void __init flatten_device_tree(void) mem_start = _ALIGN(mem_start, 4); hdr = make_room(&mem_start, &mem_end, sizeof(struct boot_param_header), 4); - RELOC(dt_header_start) = (unsigned long)hdr; + dt_header_start = (unsigned long)hdr; rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8); /* Start of strings */ mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_string_start) = mem_start; + dt_string_start = mem_start; mem_start += 4; /* hole */ /* Add "linux,phandle" in there, we'll need it */ namep = make_room(&mem_start, &mem_end, 16, 1); - strcpy(namep, RELOC("linux,phandle")); + strcpy(namep, "linux,phandle"); mem_start = (unsigned long)namep + strlen(namep) + 1; /* Build string array */ prom_printf("Building dt strings...\n"); scan_dt_build_strings(root, &mem_start, &mem_end); - RELOC(dt_string_end) = mem_start; + dt_string_end = mem_start; /* Build structure */ mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_struct_start) = mem_start; + dt_struct_start = mem_start; prom_printf("Building dt structure...\n"); scan_dt_build_struct(root, &mem_start, &mem_end); dt_push_token(OF_DT_END, &mem_start, &mem_end); - RELOC(dt_struct_end) = PAGE_ALIGN(mem_start); + dt_struct_end = PAGE_ALIGN(mem_start); /* Finish header */ - hdr->boot_cpuid_phys = _prom->cpu; + hdr->boot_cpuid_phys = prom.cpu; hdr->magic = OF_DT_HEADER; - hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start); - hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start); - hdr->off_dt_strings = RELOC(dt_string_start) - RELOC(dt_header_start); - hdr->dt_strings_size = RELOC(dt_string_end) - RELOC(dt_string_start); - hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - RELOC(dt_header_start); + hdr->totalsize = dt_struct_end - dt_header_start; + hdr->off_dt_struct = dt_struct_start - dt_header_start; + hdr->off_dt_strings = dt_string_start - dt_header_start; + hdr->dt_strings_size = dt_string_end - dt_string_start; + hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - dt_header_start; hdr->version = OF_DT_VERSION; /* Version 16 is not backward compatible */ hdr->last_comp_version = 0x10; /* Copy the reserve map in */ - memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map)); + memcpy(rsvmap, mem_reserve_map, sizeof(mem_reserve_map)); #ifdef DEBUG_PROM { int i; prom_printf("reserved memory map:\n"); - for (i = 0; i < RELOC(mem_reserve_cnt); i++) + for (i = 0; i < mem_reserve_cnt; i++) prom_printf(" %x - %x\n", - RELOC(mem_reserve_map)[i].base, - RELOC(mem_reserve_map)[i].size); + mem_reserve_map[i].base, + mem_reserve_map[i].size); } #endif /* Bump mem_reserve_cnt to cause further reservations to fail * since it's too late. */ - RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE; + mem_reserve_cnt = MEM_RESERVE_MAP_SIZE; prom_printf("Device tree strings 0x%x -> 0x%x\n", - RELOC(dt_string_start), RELOC(dt_string_end)); + dt_string_start, dt_string_end); prom_printf("Device tree struct 0x%x -> 0x%x\n", - RELOC(dt_struct_start), RELOC(dt_struct_end)); + dt_struct_start, dt_struct_end); } @@ -2526,7 +2502,6 @@ static void __init fixup_device_tree_maple_memory_controller(void) phandle mc; u32 mc_reg[4]; char *name = "/hostbridge@f8000000"; - struct prom_t *_prom = &RELOC(prom); u32 ac, sc; mc = call_prom("finddevice", 1, 1, ADDR(name)); @@ -2536,8 +2511,8 @@ static void __init fixup_device_tree_maple_memory_controller(void) if (prom_getproplen(mc, "reg") != 8) return; - prom_getprop(_prom->root, "#address-cells", &ac, sizeof(ac)); - prom_getprop(_prom->root, "#size-cells", &sc, sizeof(sc)); + prom_getprop(prom.root, "#address-cells", &ac, sizeof(ac)); + prom_getprop(prom.root, "#size-cells", &sc, sizeof(sc)); if ((ac != 2) || (sc != 2)) return; @@ -2806,50 +2781,94 @@ static void __init fixup_device_tree(void) static void __init prom_find_boot_cpu(void) { - struct prom_t *_prom = &RELOC(prom); u32 getprop_rval; ihandle prom_cpu; phandle cpu_pkg; - _prom->cpu = 0; - if (prom_getprop(_prom->chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0) + prom.cpu = 0; + if (prom_getprop(prom.chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0) return; cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu); prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); - _prom->cpu = getprop_rval; + prom.cpu = getprop_rval; - prom_debug("Booting CPU hw index = %lu\n", _prom->cpu); + prom_debug("Booting CPU hw index = %lu\n", prom.cpu); } static void __init prom_check_initrd(unsigned long r3, unsigned long r4) { #ifdef CONFIG_BLK_DEV_INITRD - struct prom_t *_prom = &RELOC(prom); - if (r3 && r4 && r4 != 0xdeadbeef) { unsigned long val; - RELOC(prom_initrd_start) = is_kernel_addr(r3) ? __pa(r3) : r3; - RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; + prom_initrd_start = is_kernel_addr(r3) ? __pa(r3) : r3; + prom_initrd_end = prom_initrd_start + r4; - val = RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "/chosen", "linux,initrd-start", + val = prom_initrd_start; + prom_setprop(prom.chosen, "/chosen", "linux,initrd-start", &val, sizeof(val)); - val = RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "/chosen", "linux,initrd-end", + val = prom_initrd_end; + prom_setprop(prom.chosen, "/chosen", "linux,initrd-end", &val, sizeof(val)); - reserve_mem(RELOC(prom_initrd_start), - RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); + reserve_mem(prom_initrd_start, + prom_initrd_end - prom_initrd_start); - prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start)); - prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end)); + prom_debug("initrd_start=0x%x\n", prom_initrd_start); + prom_debug("initrd_end=0x%x\n", prom_initrd_end); } #endif /* CONFIG_BLK_DEV_INITRD */ } +#ifdef CONFIG_PPC64 +#ifdef CONFIG_RELOCATABLE +static void reloc_toc(void) +{ +} + +static void unreloc_toc(void) +{ +} +#else +static void __reloc_toc(void *tocstart, unsigned long offset, + unsigned long nr_entries) +{ + unsigned long i; + unsigned long *toc_entry = (unsigned long *)tocstart; + + for (i = 0; i < nr_entries; i++) { + *toc_entry = *toc_entry + offset; + toc_entry++; + } +} + +static void reloc_toc(void) +{ + unsigned long offset = reloc_offset(); + unsigned long nr_entries = + (__prom_init_toc_end - __prom_init_toc_start) / sizeof(long); + + /* Need to add offset to get at __prom_init_toc_start */ + __reloc_toc(__prom_init_toc_start + offset, offset, nr_entries); + + mb(); +} + +static void unreloc_toc(void) +{ + unsigned long offset = reloc_offset(); + unsigned long nr_entries = + (__prom_init_toc_end - __prom_init_toc_start) / sizeof(long); + + mb(); + + /* __prom_init_toc_start has been relocated, no need to add offset */ + __reloc_toc(__prom_init_toc_start, -offset, nr_entries); +} +#endif +#endif /* * We enter here early on, when the Open Firmware prom is still @@ -2861,20 +2880,19 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long r6, unsigned long r7, unsigned long kbase) { - struct prom_t *_prom; unsigned long hdr; #ifdef CONFIG_PPC32 unsigned long offset = reloc_offset(); reloc_got2(offset); +#else + reloc_toc(); #endif - _prom = &RELOC(prom); - /* * First zero the BSS */ - memset(&RELOC(__bss_start), 0, __bss_stop - __bss_start); + memset(&__bss_start, 0, __bss_stop - __bss_start); /* * Init interface to Open Firmware, get some node references, @@ -2893,14 +2911,14 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_init_stdout(); - prom_printf("Preparing to boot %s", RELOC(linux_banner)); + prom_printf("Preparing to boot %s", linux_banner); /* * Get default machine type. At this point, we do not differentiate * between pSeries SMP and pSeries LPAR */ - RELOC(of_platform) = prom_find_machine_type(); - prom_printf("Detected machine type: %x\n", RELOC(of_platform)); + of_platform = prom_find_machine_type(); + prom_printf("Detected machine type: %x\n", of_platform); #ifndef CONFIG_NONSTATIC_KERNEL /* Bail if this is a kdump kernel. */ @@ -2917,15 +2935,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) == PLATFORM_PSERIES || - RELOC(of_platform) == PLATFORM_PSERIES_LPAR) + if (of_platform == PLATFORM_PSERIES || + of_platform == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); #endif /* * Copy the CPU hold code */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) + if (of_platform != PLATFORM_POWERMAC) copy_and_flush(0, kbase, 0x100, 0); /* @@ -2954,7 +2972,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * that uses the allocator, we need to make sure we get the top of memory * available for us here... */ - if (RELOC(of_platform) == PLATFORM_PSERIES) + if (of_platform == PLATFORM_PSERIES) prom_initialize_tce_table(); #endif @@ -2962,19 +2980,19 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * On non-powermacs, try to instantiate RTAS. PowerMacs don't * have a usable RTAS implementation. */ - if (RELOC(of_platform) != PLATFORM_POWERMAC && - RELOC(of_platform) != PLATFORM_OPAL) + if (of_platform != PLATFORM_POWERMAC && + of_platform != PLATFORM_OPAL) prom_instantiate_rtas(); #ifdef CONFIG_PPC_POWERNV /* Detect HAL and try instanciating it & doing takeover */ - if (RELOC(of_platform) == PLATFORM_PSERIES_LPAR) { + if (of_platform == PLATFORM_PSERIES_LPAR) { prom_query_opal(); - if (RELOC(of_platform) == PLATFORM_OPAL) { + if (of_platform == PLATFORM_OPAL) { prom_opal_hold_cpus(); prom_opal_takeover(); } - } else if (RELOC(of_platform) == PLATFORM_OPAL) + } else if (of_platform == PLATFORM_OPAL) prom_instantiate_opal(); #endif @@ -2988,32 +3006,32 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * * PowerMacs use a different mechanism to spin CPUs */ - if (RELOC(of_platform) != PLATFORM_POWERMAC && - RELOC(of_platform) != PLATFORM_OPAL) + if (of_platform != PLATFORM_POWERMAC && + of_platform != PLATFORM_OPAL) prom_hold_cpus(); /* * Fill in some infos for use by the kernel later on */ - if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", - &RELOC(prom_memory_limit), + if (prom_memory_limit) + prom_setprop(prom.chosen, "/chosen", "linux,memory-limit", + &prom_memory_limit, sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 - if (RELOC(prom_iommu_off)) - prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", + if (prom_iommu_off) + prom_setprop(prom.chosen, "/chosen", "linux,iommu-off", NULL, 0); - if (RELOC(prom_iommu_force_on)) - prom_setprop(_prom->chosen, "/chosen", "linux,iommu-force-on", + if (prom_iommu_force_on) + prom_setprop(prom.chosen, "/chosen", "linux,iommu-force-on", NULL, 0); - if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-start", - &RELOC(prom_tce_alloc_start), + if (prom_tce_alloc_start) { + prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-start", + &prom_tce_alloc_start, sizeof(prom_tce_alloc_start)); - prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-end", - &RELOC(prom_tce_alloc_end), + prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-end", + &prom_tce_alloc_end, sizeof(prom_tce_alloc_end)); } #endif @@ -3035,8 +3053,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * closed stdin already (in particular the powerbook 101). It * appears that the OPAL version of OFW doesn't like it either. */ - if (RELOC(of_platform) != PLATFORM_POWERMAC && - RELOC(of_platform) != PLATFORM_OPAL) + if (of_platform != PLATFORM_POWERMAC && + of_platform != PLATFORM_OPAL) prom_close_stdin(); /* @@ -3051,22 +3069,24 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * tree and NULL as r5, thus triggering the new entry point which * is common to us and kexec */ - hdr = RELOC(dt_header_start); + hdr = dt_header_start; /* Don't print anything after quiesce under OPAL, it crashes OFW */ - if (RELOC(of_platform) != PLATFORM_OPAL) { + if (of_platform != PLATFORM_OPAL) { prom_printf("returning from prom_init\n"); prom_debug("->dt_header_start=0x%x\n", hdr); } #ifdef CONFIG_PPC32 reloc_got2(-offset); +#else + unreloc_toc(); #endif #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL /* OPAL early debug gets the OPAL base & entry in r8 and r9 */ __start(hdr, kbase, 0, 0, 0, - RELOC(prom_opal_base), RELOC(prom_opal_entry)); + prom_opal_base, prom_opal_entry); #else __start(hdr, kbase, 0, 0, 0, 0, 0); #endif diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 70f4286..3765da6 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -22,7 +22,7 @@ __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 reloc_got2 kernstart_addr memstart_addr linux_banner _stext opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry -boot_command_line" +boot_command_line __prom_init_toc_start __prom_init_toc_end" NM="$1" OBJ="$2" diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index c497000..245c1b6 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -179,6 +179,30 @@ static int set_user_msr(struct task_struct *task, unsigned long msr) return 0; } +#ifdef CONFIG_PPC64 +static unsigned long get_user_dscr(struct task_struct *task) +{ + return task->thread.dscr; +} + +static int set_user_dscr(struct task_struct *task, unsigned long dscr) +{ + task->thread.dscr = dscr; + task->thread.dscr_inherit = 1; + return 0; +} +#else +static unsigned long get_user_dscr(struct task_struct *task) +{ + return -EIO; +} + +static int set_user_dscr(struct task_struct *task, unsigned long dscr) +{ + return -EIO; +} +#endif + /* * We prevent mucking around with the reserved area of trap * which are used internally by the kernel. @@ -200,6 +224,9 @@ unsigned long ptrace_get_reg(struct task_struct *task, int regno) if (regno == PT_MSR) return get_user_msr(task); + if (regno == PT_DSCR) + return get_user_dscr(task); + if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long))) return ((unsigned long *)task->thread.regs)[regno]; @@ -218,6 +245,8 @@ int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data) return set_user_msr(task, data); if (regno == PT_TRAP) return set_user_trap(task, data); + if (regno == PT_DSCR) + return set_user_dscr(task, data); if (regno <= PT_MAX_PUT_REG) { ((unsigned long *)task->thread.regs)[regno] = data; @@ -905,6 +934,9 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, struct perf_event *bp; struct perf_event_attr attr; #endif /* CONFIG_HAVE_HW_BREAKPOINT */ +#ifndef CONFIG_PPC_ADV_DEBUG_REGS + struct arch_hw_breakpoint hw_brk; +#endif /* For ppc64 we support one DABR and no IABR's at the moment (ppc64). * For embedded processors we support one DAC and no IAC's at the @@ -931,14 +963,17 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, */ /* Ensure breakpoint translation bit is set */ - if (data && !(data & DABR_TRANSLATION)) + if (data && !(data & HW_BRK_TYPE_TRANSLATE)) return -EIO; + hw_brk.address = data & (~HW_BRK_TYPE_DABR); + hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL; + hw_brk.len = 8; #ifdef CONFIG_HAVE_HW_BREAKPOINT if (ptrace_get_breakpoints(task) < 0) return -ESRCH; bp = thread->ptrace_bps[0]; - if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) { + if ((!data) || !(hw_brk.type & HW_BRK_TYPE_RDWR)) { if (bp) { unregister_hw_breakpoint(bp); thread->ptrace_bps[0] = NULL; @@ -948,10 +983,8 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, } if (bp) { attr = bp->attr; - attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN; - arch_bp_generic_fields(data & - (DABR_DATA_WRITE | DABR_DATA_READ), - &attr.bp_type); + attr.bp_addr = hw_brk.address; + arch_bp_generic_fields(hw_brk.type, &attr.bp_type); /* Enable breakpoint */ attr.disabled = false; @@ -963,16 +996,15 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, } thread->ptrace_bps[0] = bp; ptrace_put_breakpoints(task); - thread->dabr = data; - thread->dabrx = DABRX_ALL; + thread->hw_brk = hw_brk; return 0; } /* Create a new breakpoint request if one doesn't exist already */ hw_breakpoint_init(&attr); - attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN; - arch_bp_generic_fields(data & (DABR_DATA_WRITE | DABR_DATA_READ), - &attr.bp_type); + attr.bp_addr = hw_brk.address; + arch_bp_generic_fields(hw_brk.type, + &attr.bp_type); thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr, ptrace_triggered, NULL, task); @@ -985,10 +1017,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, ptrace_put_breakpoints(task); #endif /* CONFIG_HAVE_HW_BREAKPOINT */ - - /* Move contents to the DABR register */ - task->thread.dabr = data; - task->thread.dabrx = DABRX_ALL; + task->thread.hw_brk = hw_brk; #else /* CONFIG_PPC_ADV_DEBUG_REGS */ /* As described above, it was assumed 3 bits were passed with the data * address, but we will assume only the mode bits will be passed @@ -1349,7 +1378,7 @@ static long ppc_set_hwdebug(struct task_struct *child, struct perf_event_attr attr; #endif /* CONFIG_HAVE_HW_BREAKPOINT */ #ifndef CONFIG_PPC_ADV_DEBUG_REGS - unsigned long dabr; + struct arch_hw_breakpoint brk; #endif if (bp_info->version != 1) @@ -1397,12 +1426,12 @@ static long ppc_set_hwdebug(struct task_struct *child, if ((unsigned long)bp_info->addr >= TASK_SIZE) return -EIO; - dabr = (unsigned long)bp_info->addr & ~7UL; - dabr |= DABR_TRANSLATION; + brk.address = bp_info->addr & ~7UL; + brk.type = HW_BRK_TYPE_TRANSLATE; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) - dabr |= DABR_DATA_READ; + brk.type |= HW_BRK_TYPE_READ; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) - dabr |= DABR_DATA_WRITE; + brk.type |= HW_BRK_TYPE_WRITE; #ifdef CONFIG_HAVE_HW_BREAKPOINT if (ptrace_get_breakpoints(child) < 0) return -ESRCH; @@ -1427,8 +1456,7 @@ static long ppc_set_hwdebug(struct task_struct *child, hw_breakpoint_init(&attr); attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN; attr.bp_len = len; - arch_bp_generic_fields(dabr & (DABR_DATA_WRITE | DABR_DATA_READ), - &attr.bp_type); + arch_bp_generic_fields(brk.type, &attr.bp_type); thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr, ptrace_triggered, NULL, child); @@ -1445,11 +1473,10 @@ static long ppc_set_hwdebug(struct task_struct *child, if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) return -EINVAL; - if (child->thread.dabr) + if (child->thread.hw_brk.address) return -ENOSPC; - child->thread.dabr = dabr; - child->thread.dabrx = DABRX_ALL; + child->thread.hw_brk = brk; return 1; #endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */ @@ -1495,10 +1522,11 @@ static long ppc_del_hwdebug(struct task_struct *child, long data) ptrace_put_breakpoints(child); return ret; #else /* CONFIG_HAVE_HW_BREAKPOINT */ - if (child->thread.dabr == 0) + if (child->thread.hw_brk.address == 0) return -ENOENT; - child->thread.dabr = 0; + child->thread.hw_brk.address = 0; + child->thread.hw_brk.type = 0; #endif /* CONFIG_HAVE_HW_BREAKPOINT */ return 0; @@ -1642,6 +1670,9 @@ long arch_ptrace(struct task_struct *child, long request, } case PTRACE_GET_DEBUGREG: { +#ifndef CONFIG_PPC_ADV_DEBUG_REGS + unsigned long dabr_fake; +#endif ret = -EINVAL; /* We only support one DABR and no IABRS at the moment */ if (addr > 0) @@ -1649,7 +1680,9 @@ long arch_ptrace(struct task_struct *child, long request, #ifdef CONFIG_PPC_ADV_DEBUG_REGS ret = put_user(child->thread.dac1, datalp); #else - ret = put_user(child->thread.dabr, datalp); + dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | + (child->thread.hw_brk.type & HW_BRK_TYPE_DABR)); + ret = put_user(dabr_fake, datalp); #endif break; } diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 8c21658..c0244e7 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -252,6 +252,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, } case PTRACE_GET_DEBUGREG: { +#ifndef CONFIG_PPC_ADV_DEBUG_REGS + unsigned long dabr_fake; +#endif ret = -EINVAL; /* We only support one DABR and no IABRS at the moment */ if (addr > 0) @@ -259,7 +262,10 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, #ifdef CONFIG_PPC_ADV_DEBUG_REGS ret = put_user(child->thread.dac1, (u32 __user *)data); #else - ret = put_user(child->thread.dabr, (u32 __user *)data); + dabr_fake = ( + (child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | + (child->thread.hw_brk.type & HW_BRK_TYPE_DABR)); + ret = put_user(dabr_fake, (u32 __user *)data); #endif break; } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 6da881b..75fbaceb 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -156,6 +156,15 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ +/** Fix up paca fields required for the boot cpu */ +static void fixup_boot_paca(void) +{ + /* The boot cpu is started */ + get_paca()->cpu_start = 1; + /* Allow percpu accesses to work until we setup percpu data */ + get_paca()->data_offset = 0; +} + /* * Early initialization entry point. This is called by head.S * with MMU translation disabled. We rely on the "feature" of @@ -177,6 +186,8 @@ early_param("smt-enabled", early_smt_enabled); void __init early_setup(unsigned long dt_ptr) { + static __initdata struct paca_struct boot_paca; + /* -------- printk is _NOT_ safe to use here ! ------- */ /* Identify CPU type */ @@ -185,6 +196,7 @@ void __init early_setup(unsigned long dt_ptr) /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ initialise_paca(&boot_paca, 0); setup_paca(&boot_paca); + fixup_boot_paca(); /* Initialize lockdep early or else spinlocks will blow */ lockdep_init(); @@ -205,11 +217,7 @@ void __init early_setup(unsigned long dt_ptr) /* Now we know the logical id of our boot cpu, setup the paca. */ setup_paca(&paca[boot_cpuid]); - - /* Fix up paca fields required for the boot cpu */ - get_paca()->cpu_start = 1; - /* Allow percpu accesses to "work" until we setup percpu data */ - get_paca()->data_offset = 0; + fixup_boot_paca(); /* Probe the machine type */ probe_machine(); diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 3b99711..3003d89 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -130,8 +130,9 @@ static int do_signal(struct pt_regs *regs) * user space. The DABR will have been cleared if it * triggered inside the kernel. */ - if (current->thread.dabr) - set_dabr(current->thread.dabr, current->thread.dabrx); + if (current->thread.hw_brk.address && + current->thread.hw_brk.type) + set_breakpoint(¤t->thread.hw_brk); #endif /* Re-enable the breakpoints for the signal stack */ thread_change_pc(current, regs); diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index e00acb4..ec84c90 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -25,13 +25,21 @@ extern int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, extern unsigned long copy_fpr_to_user(void __user *to, struct task_struct *task); +extern unsigned long copy_transact_fpr_to_user(void __user *to, + struct task_struct *task); extern unsigned long copy_fpr_from_user(struct task_struct *task, void __user *from); +extern unsigned long copy_transact_fpr_from_user(struct task_struct *task, + void __user *from); #ifdef CONFIG_VSX extern unsigned long copy_vsx_to_user(void __user *to, struct task_struct *task); +extern unsigned long copy_transact_vsx_to_user(void __user *to, + struct task_struct *task); extern unsigned long copy_vsx_from_user(struct task_struct *task, void __user *from); +extern unsigned long copy_transact_vsx_from_user(struct task_struct *task, + void __user *from); #endif #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 804e323..e4a88d3 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -43,6 +43,7 @@ #include <asm/sigcontext.h> #include <asm/vdso.h> #include <asm/switch_to.h> +#include <asm/tm.h> #ifdef CONFIG_PPC64 #include "ppc32.h" #include <asm/unistd.h> @@ -293,6 +294,10 @@ long sys_sigaction(int sig, struct old_sigaction __user *act, struct sigframe { struct sigcontext sctx; /* the sigcontext */ struct mcontext mctx; /* all the register values */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + struct sigcontext sctx_transact; + struct mcontext mctx_transact; +#endif /* * Programs using the rs6000/xcoff abi can save up to 19 gp * regs and 18 fp regs below sp before decrementing it. @@ -321,6 +326,9 @@ struct rt_sigframe { struct siginfo info; #endif struct ucontext uc; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + struct ucontext uc_transact; +#endif /* * Programs using the rs6000/xcoff abi can save up to 19 gp * regs and 18 fp regs below sp before decrementing it. @@ -381,6 +389,61 @@ unsigned long copy_vsx_from_user(struct task_struct *task, task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; return 0; } + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +unsigned long copy_transact_fpr_to_user(void __user *to, + struct task_struct *task) +{ + double buf[ELF_NFPREG]; + int i; + + /* save FPR copy to local buffer then write to the thread_struct */ + for (i = 0; i < (ELF_NFPREG - 1) ; i++) + buf[i] = task->thread.TS_TRANS_FPR(i); + memcpy(&buf[i], &task->thread.transact_fpscr, sizeof(double)); + return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double)); +} + +unsigned long copy_transact_fpr_from_user(struct task_struct *task, + void __user *from) +{ + double buf[ELF_NFPREG]; + int i; + + if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double))) + return 1; + for (i = 0; i < (ELF_NFPREG - 1) ; i++) + task->thread.TS_TRANS_FPR(i) = buf[i]; + memcpy(&task->thread.transact_fpscr, &buf[i], sizeof(double)); + + return 0; +} + +unsigned long copy_transact_vsx_to_user(void __user *to, + struct task_struct *task) +{ + double buf[ELF_NVSRHALFREG]; + int i; + + /* save FPR copy to local buffer then write to the thread_struct */ + for (i = 0; i < ELF_NVSRHALFREG; i++) + buf[i] = task->thread.transact_fpr[i][TS_VSRLOWOFFSET]; + return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double)); +} + +unsigned long copy_transact_vsx_from_user(struct task_struct *task, + void __user *from) +{ + double buf[ELF_NVSRHALFREG]; + int i; + + if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double))) + return 1; + for (i = 0; i < ELF_NVSRHALFREG ; i++) + task->thread.transact_fpr[i][TS_VSRLOWOFFSET] = buf[i]; + return 0; +} +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ #else inline unsigned long copy_fpr_to_user(void __user *to, struct task_struct *task) @@ -395,6 +458,22 @@ inline unsigned long copy_fpr_from_user(struct task_struct *task, return __copy_from_user(task->thread.fpr, from, ELF_NFPREG * sizeof(double)); } + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +inline unsigned long copy_transact_fpr_to_user(void __user *to, + struct task_struct *task) +{ + return __copy_to_user(to, task->thread.transact_fpr, + ELF_NFPREG * sizeof(double)); +} + +inline unsigned long copy_transact_fpr_from_user(struct task_struct *task, + void __user *from) +{ + return __copy_from_user(task->thread.transact_fpr, from, + ELF_NFPREG * sizeof(double)); +} +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ #endif /* @@ -483,6 +562,156 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, return 0; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * Save the current user registers on the user stack. + * We only save the altivec/spe registers if the process has used + * altivec/spe instructions at some point. + * We also save the transactional registers to a second ucontext in the + * frame. + * + * See save_user_regs() and signal_64.c:setup_tm_sigcontexts(). + */ +static int save_tm_user_regs(struct pt_regs *regs, + struct mcontext __user *frame, + struct mcontext __user *tm_frame, int sigret) +{ + unsigned long msr = regs->msr; + + /* tm_reclaim rolls back all reg states, updating thread.ckpt_regs, + * thread.transact_fpr[], thread.transact_vr[], etc. + */ + tm_enable(); + tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); + + /* Make sure floating point registers are stored in regs */ + flush_fp_to_thread(current); + + /* Save both sets of general registers */ + if (save_general_regs(¤t->thread.ckpt_regs, frame) + || save_general_regs(regs, tm_frame)) + return 1; + + /* Stash the top half of the 64bit MSR into the 32bit MSR word + * of the transactional mcontext. This way we have a backward-compatible + * MSR in the 'normal' (checkpointed) mcontext and additionally one can + * also look at what type of transaction (T or S) was active at the + * time of the signal. + */ + if (__put_user((msr >> 32), &tm_frame->mc_gregs[PT_MSR])) + return 1; + +#ifdef CONFIG_ALTIVEC + /* save altivec registers */ + if (current->thread.used_vr) { + flush_altivec_to_thread(current); + if (__copy_to_user(&frame->mc_vregs, current->thread.vr, + ELF_NVRREG * sizeof(vector128))) + return 1; + if (msr & MSR_VEC) { + if (__copy_to_user(&tm_frame->mc_vregs, + current->thread.transact_vr, + ELF_NVRREG * sizeof(vector128))) + return 1; + } else { + if (__copy_to_user(&tm_frame->mc_vregs, + current->thread.vr, + ELF_NVRREG * sizeof(vector128))) + return 1; + } + + /* set MSR_VEC in the saved MSR value to indicate that + * frame->mc_vregs contains valid data + */ + msr |= MSR_VEC; + } + + /* We always copy to/from vrsave, it's 0 if we don't have or don't + * use altivec. Since VSCR only contains 32 bits saved in the least + * significant bits of a vector, we "cheat" and stuff VRSAVE in the + * most significant bits of that same vector. --BenH + */ + if (__put_user(current->thread.vrsave, + (u32 __user *)&frame->mc_vregs[32])) + return 1; + if (msr & MSR_VEC) { + if (__put_user(current->thread.transact_vrsave, + (u32 __user *)&tm_frame->mc_vregs[32])) + return 1; + } else { + if (__put_user(current->thread.vrsave, + (u32 __user *)&tm_frame->mc_vregs[32])) + return 1; + } +#endif /* CONFIG_ALTIVEC */ + + if (copy_fpr_to_user(&frame->mc_fregs, current)) + return 1; + if (msr & MSR_FP) { + if (copy_transact_fpr_to_user(&tm_frame->mc_fregs, current)) + return 1; + } else { + if (copy_fpr_to_user(&tm_frame->mc_fregs, current)) + return 1; + } + +#ifdef CONFIG_VSX + /* + * Copy VSR 0-31 upper half from thread_struct to local + * buffer, then write that to userspace. Also set MSR_VSX in + * the saved MSR value to indicate that frame->mc_vregs + * contains valid data + */ + if (current->thread.used_vsr) { + __giveup_vsx(current); + if (copy_vsx_to_user(&frame->mc_vsregs, current)) + return 1; + if (msr & MSR_VSX) { + if (copy_transact_vsx_to_user(&tm_frame->mc_vsregs, + current)) + return 1; + } else { + if (copy_vsx_to_user(&tm_frame->mc_vsregs, current)) + return 1; + } + + msr |= MSR_VSX; + } +#endif /* CONFIG_VSX */ +#ifdef CONFIG_SPE + /* SPE regs are not checkpointed with TM, so this section is + * simply the same as in save_user_regs(). + */ + if (current->thread.used_spe) { + flush_spe_to_thread(current); + if (__copy_to_user(&frame->mc_vregs, current->thread.evr, + ELF_NEVRREG * sizeof(u32))) + return 1; + /* set MSR_SPE in the saved MSR value to indicate that + * frame->mc_vregs contains valid data */ + msr |= MSR_SPE; + } + + /* We always copy to/from spefscr */ + if (__put_user(current->thread.spefscr, (u32 __user *)&frame->mc_vregs + ELF_NEVRREG)) + return 1; +#endif /* CONFIG_SPE */ + + if (__put_user(msr, &frame->mc_gregs[PT_MSR])) + return 1; + if (sigret) { + /* Set up the sigreturn trampoline: li r0,sigret; sc */ + if (__put_user(0x38000000UL + sigret, &frame->tramp[0]) + || __put_user(0x44000002UL, &frame->tramp[1])) + return 1; + flush_icache_range((unsigned long) &frame->tramp[0], + (unsigned long) &frame->tramp[2]); + } + + return 0; +} +#endif + /* * Restore the current user register values from the user stack, * (except for MSR). @@ -588,6 +817,139 @@ static long restore_user_regs(struct pt_regs *regs, return 0; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * Restore the current user register values from the user stack, except for + * MSR, and recheckpoint the original checkpointed register state for processes + * in transactions. + */ +static long restore_tm_user_regs(struct pt_regs *regs, + struct mcontext __user *sr, + struct mcontext __user *tm_sr) +{ + long err; + unsigned long msr; +#ifdef CONFIG_VSX + int i; +#endif + + /* + * restore general registers but not including MSR or SOFTE. Also + * take care of keeping r2 (TLS) intact if not a signal. + * See comment in signal_64.c:restore_tm_sigcontexts(); + * TFHAR is restored from the checkpointed NIP; TEXASR and TFIAR + * were set by the signal delivery. + */ + err = restore_general_regs(regs, tm_sr); + err |= restore_general_regs(¤t->thread.ckpt_regs, sr); + + err |= __get_user(current->thread.tm_tfhar, &sr->mc_gregs[PT_NIP]); + + err |= __get_user(msr, &sr->mc_gregs[PT_MSR]); + if (err) + return 1; + + /* Restore the previous little-endian mode */ + regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); + + /* + * Do this before updating the thread state in + * current->thread.fpr/vr/evr. That way, if we get preempted + * and another task grabs the FPU/Altivec/SPE, it won't be + * tempted to save the current CPU state into the thread_struct + * and corrupt what we are writing there. + */ + discard_lazy_cpu_state(); + +#ifdef CONFIG_ALTIVEC + regs->msr &= ~MSR_VEC; + if (msr & MSR_VEC) { + /* restore altivec registers from the stack */ + if (__copy_from_user(current->thread.vr, &sr->mc_vregs, + sizeof(sr->mc_vregs)) || + __copy_from_user(current->thread.transact_vr, + &tm_sr->mc_vregs, + sizeof(sr->mc_vregs))) + return 1; + } else if (current->thread.used_vr) { + memset(current->thread.vr, 0, ELF_NVRREG * sizeof(vector128)); + memset(current->thread.transact_vr, 0, + ELF_NVRREG * sizeof(vector128)); + } + + /* Always get VRSAVE back */ + if (__get_user(current->thread.vrsave, + (u32 __user *)&sr->mc_vregs[32]) || + __get_user(current->thread.transact_vrsave, + (u32 __user *)&tm_sr->mc_vregs[32])) + return 1; +#endif /* CONFIG_ALTIVEC */ + + regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); + + if (copy_fpr_from_user(current, &sr->mc_fregs) || + copy_transact_fpr_from_user(current, &tm_sr->mc_fregs)) + return 1; + +#ifdef CONFIG_VSX + regs->msr &= ~MSR_VSX; + if (msr & MSR_VSX) { + /* + * Restore altivec registers from the stack to a local + * buffer, then write this out to the thread_struct + */ + if (copy_vsx_from_user(current, &sr->mc_vsregs) || + copy_transact_vsx_from_user(current, &tm_sr->mc_vsregs)) + return 1; + } else if (current->thread.used_vsr) + for (i = 0; i < 32 ; i++) { + current->thread.fpr[i][TS_VSRLOWOFFSET] = 0; + current->thread.transact_fpr[i][TS_VSRLOWOFFSET] = 0; + } +#endif /* CONFIG_VSX */ + +#ifdef CONFIG_SPE + /* SPE regs are not checkpointed with TM, so this section is + * simply the same as in restore_user_regs(). + */ + regs->msr &= ~MSR_SPE; + if (msr & MSR_SPE) { + if (__copy_from_user(current->thread.evr, &sr->mc_vregs, + ELF_NEVRREG * sizeof(u32))) + return 1; + } else if (current->thread.used_spe) + memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32)); + + /* Always get SPEFSCR back */ + if (__get_user(current->thread.spefscr, (u32 __user *)&sr->mc_vregs + + ELF_NEVRREG)) + return 1; +#endif /* CONFIG_SPE */ + + /* Now, recheckpoint. This loads up all of the checkpointed (older) + * registers, including FP and V[S]Rs. After recheckpointing, the + * transactional versions should be loaded. + */ + tm_enable(); + /* This loads the checkpointed FP/VEC state, if used */ + tm_recheckpoint(¤t->thread, msr); + /* The task has moved into TM state S, so ensure MSR reflects this */ + regs->msr = (regs->msr & ~MSR_TS_MASK) | MSR_TS_S; + + /* This loads the speculative FP/VEC state, if used */ + if (msr & MSR_FP) { + do_load_up_transact_fpu(¤t->thread); + regs->msr |= (MSR_FP | current->thread.fpexc_mode); + } + if (msr & MSR_VEC) { + do_load_up_transact_altivec(¤t->thread); + regs->msr |= MSR_VEC; + } + + return 0; +} +#endif + #ifdef CONFIG_PPC64 long compat_sys_rt_sigaction(int sig, const struct sigaction32 __user *act, struct sigaction32 __user *oact, size_t sigsetsize) @@ -827,6 +1189,8 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, struct mcontext __user *frame; void __user *addr; unsigned long newsp = 0; + int sigret; + unsigned long tramp; /* Set up Signal Frame */ /* Put a Real Time Context onto stack */ @@ -838,7 +1202,6 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, /* Put the siginfo & fill in most of the ucontext */ if (copy_siginfo_to_user(&rt_sf->info, info) || __put_user(0, &rt_sf->uc.uc_flags) - || __put_user(0, &rt_sf->uc.uc_link) || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp) || __put_user(sas_ss_flags(regs->gpr[1]), &rt_sf->uc.uc_stack.ss_flags) @@ -852,14 +1215,37 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, frame = &rt_sf->uc.uc_mcontext; addr = frame; if (vdso32_rt_sigtramp && current->mm->context.vdso_base) { - if (save_user_regs(regs, frame, 0, 1)) - goto badframe; - regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp; + sigret = 0; + tramp = current->mm->context.vdso_base + vdso32_rt_sigtramp; } else { - if (save_user_regs(regs, frame, __NR_rt_sigreturn, 1)) + sigret = __NR_rt_sigreturn; + tramp = (unsigned long) frame->tramp; + } + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + if (save_tm_user_regs(regs, &rt_sf->uc.uc_mcontext, + &rt_sf->uc_transact.uc_mcontext, sigret)) goto badframe; - regs->link = (unsigned long) frame->tramp; } + else +#endif + if (save_user_regs(regs, frame, sigret, 1)) + goto badframe; + regs->link = tramp; + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + if (__put_user((unsigned long)&rt_sf->uc_transact, + &rt_sf->uc.uc_link) + || __put_user(to_user_ptr(&rt_sf->uc_transact.uc_mcontext), + &rt_sf->uc_transact.uc_regs)) + goto badframe; + } + else +#endif + if (__put_user(0, &rt_sf->uc.uc_link)) + goto badframe; current->thread.fpscr.val = 0; /* turn off all fp exceptions */ @@ -878,6 +1264,13 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, regs->nip = (unsigned long) ka->sa.sa_handler; /* enter the signal handler in big-endian mode */ regs->msr &= ~MSR_LE; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Remove TM bits from thread's MSR. The MSR in the sigcontext + * just indicates to userland that we were doing a transaction, but we + * don't want to return in transactional state: + */ + regs->msr &= ~MSR_TS_MASK; +#endif return 1; badframe: @@ -925,6 +1318,35 @@ static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int return 0; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static int do_setcontext_tm(struct ucontext __user *ucp, + struct ucontext __user *tm_ucp, + struct pt_regs *regs) +{ + sigset_t set; + struct mcontext __user *mcp; + struct mcontext __user *tm_mcp; + u32 cmcp; + u32 tm_cmcp; + + if (get_sigset_t(&set, &ucp->uc_sigmask)) + return -EFAULT; + + if (__get_user(cmcp, &ucp->uc_regs) || + __get_user(tm_cmcp, &tm_ucp->uc_regs)) + return -EFAULT; + mcp = (struct mcontext __user *)(u64)cmcp; + tm_mcp = (struct mcontext __user *)(u64)tm_cmcp; + /* no need to check access_ok(mcp), since mcp < 4GB */ + + set_current_blocked(&set); + if (restore_tm_user_regs(regs, mcp, tm_mcp)) + return -EFAULT; + + return 0; +} +#endif + long sys_swapcontext(struct ucontext __user *old_ctx, struct ucontext __user *new_ctx, int ctx_size, int r6, int r7, int r8, struct pt_regs *regs) @@ -1020,7 +1442,12 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, struct pt_regs *regs) { struct rt_sigframe __user *rt_sf; - +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + struct ucontext __user *uc_transact; + unsigned long msr_hi; + unsigned long tmp; + int tm_restore = 0; +#endif /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; @@ -1028,6 +1455,34 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, (regs->gpr[1] + __SIGNAL_FRAMESIZE + 16); if (!access_ok(VERIFY_READ, rt_sf, sizeof(*rt_sf))) goto bad; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (__get_user(tmp, &rt_sf->uc.uc_link)) + goto bad; + uc_transact = (struct ucontext __user *)(uintptr_t)tmp; + if (uc_transact) { + u32 cmcp; + struct mcontext __user *mcp; + + if (__get_user(cmcp, &uc_transact->uc_regs)) + return -EFAULT; + mcp = (struct mcontext __user *)(u64)cmcp; + /* The top 32 bits of the MSR are stashed in the transactional + * ucontext. */ + if (__get_user(msr_hi, &mcp->mc_gregs[PT_MSR])) + goto bad; + + if (MSR_TM_SUSPENDED(msr_hi<<32)) { + /* We only recheckpoint on return if we're + * transaction. + */ + tm_restore = 1; + if (do_setcontext_tm(&rt_sf->uc, uc_transact, regs)) + goto bad; + } + } + if (!tm_restore) + /* Fall through, for non-TM restore */ +#endif if (do_setcontext(&rt_sf->uc, regs, 1)) goto bad; @@ -1179,6 +1634,8 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, struct sigcontext __user *sc; struct sigframe __user *frame; unsigned long newsp = 0; + int sigret; + unsigned long tramp; /* Set up Signal Frame */ frame = get_sigframe(ka, regs, sizeof(*frame), 1); @@ -1201,14 +1658,25 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, goto badframe; if (vdso32_sigtramp && current->mm->context.vdso_base) { - if (save_user_regs(regs, &frame->mctx, 0, 1)) - goto badframe; - regs->link = current->mm->context.vdso_base + vdso32_sigtramp; + sigret = 0; + tramp = current->mm->context.vdso_base + vdso32_sigtramp; } else { - if (save_user_regs(regs, &frame->mctx, __NR_sigreturn, 1)) + sigret = __NR_sigreturn; + tramp = (unsigned long) frame->mctx.tramp; + } + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + if (save_tm_user_regs(regs, &frame->mctx, &frame->mctx_transact, + sigret)) goto badframe; - regs->link = (unsigned long) frame->mctx.tramp; } + else +#endif + if (save_user_regs(regs, &frame->mctx, sigret, 1)) + goto badframe; + + regs->link = tramp; current->thread.fpscr.val = 0; /* turn off all fp exceptions */ @@ -1223,7 +1691,13 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, regs->nip = (unsigned long) ka->sa.sa_handler; /* enter the signal handler in big-endian mode */ regs->msr &= ~MSR_LE; - +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Remove TM bits from thread's MSR. The MSR in the sigcontext + * just indicates to userland that we were doing a transaction, but we + * don't want to return in transactional state: + */ + regs->msr &= ~MSR_TS_MASK; +#endif return 1; badframe: diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 1ca045d..7a76ee4 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -34,6 +34,7 @@ #include <asm/syscalls.h> #include <asm/vdso.h> #include <asm/switch_to.h> +#include <asm/tm.h> #include "signal.h" @@ -56,6 +57,9 @@ struct rt_sigframe { /* sys_rt_sigreturn requires the ucontext be the first field */ struct ucontext uc; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + struct ucontext uc_transact; +#endif unsigned long _unused[2]; unsigned int tramp[TRAMP_SIZE]; struct siginfo __user *pinfo; @@ -145,6 +149,145 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, return err; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * As above, but Transactional Memory is in use, so deliver sigcontexts + * containing checkpointed and transactional register states. + * + * To do this, we treclaim to gather both sets of registers and set up the + * 'normal' sigcontext registers with rolled-back register values such that a + * simple signal handler sees a correct checkpointed register state. + * If interested, a TM-aware sighandler can examine the transactional registers + * in the 2nd sigcontext to determine the real origin of the signal. + */ +static long setup_tm_sigcontexts(struct sigcontext __user *sc, + struct sigcontext __user *tm_sc, + struct pt_regs *regs, + int signr, sigset_t *set, unsigned long handler) +{ + /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the + * process never used altivec yet (MSR_VEC is zero in pt_regs of + * the context). This is very important because we must ensure we + * don't lose the VRSAVE content that may have been set prior to + * the process doing its first vector operation + * Userland shall check AT_HWCAP to know wether it can rely on the + * v_regs pointer or not. + */ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *) + (((unsigned long)sc->vmx_reserve + 15) & ~0xful); + elf_vrreg_t __user *tm_v_regs = (elf_vrreg_t __user *) + (((unsigned long)tm_sc->vmx_reserve + 15) & ~0xful); +#endif + unsigned long msr = regs->msr; + long err = 0; + + BUG_ON(!MSR_TM_ACTIVE(regs->msr)); + + /* tm_reclaim rolls back all reg states, saving checkpointed (older) + * GPRs to thread.ckpt_regs and (if used) FPRs to (newer) + * thread.transact_fp and/or VRs to (newer) thread.transact_vr. + * THEN we save out FP/VRs, if necessary, to the checkpointed (older) + * thread.fr[]/vr[]s. The transactional (newer) GPRs are on the + * stack, in *regs. + */ + tm_enable(); + tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); + + flush_fp_to_thread(current); + +#ifdef CONFIG_ALTIVEC + err |= __put_user(v_regs, &sc->v_regs); + err |= __put_user(tm_v_regs, &tm_sc->v_regs); + + /* save altivec registers */ + if (current->thread.used_vr) { + flush_altivec_to_thread(current); + /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ + err |= __copy_to_user(v_regs, current->thread.vr, + 33 * sizeof(vector128)); + /* If VEC was enabled there are transactional VRs valid too, + * else they're a copy of the checkpointed VRs. + */ + if (msr & MSR_VEC) + err |= __copy_to_user(tm_v_regs, + current->thread.transact_vr, + 33 * sizeof(vector128)); + else + err |= __copy_to_user(tm_v_regs, + current->thread.vr, + 33 * sizeof(vector128)); + + /* set MSR_VEC in the MSR value in the frame to indicate + * that sc->v_reg contains valid data. + */ + msr |= MSR_VEC; + } + /* We always copy to/from vrsave, it's 0 if we don't have or don't + * use altivec. + */ + err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); + if (msr & MSR_VEC) + err |= __put_user(current->thread.transact_vrsave, + (u32 __user *)&tm_v_regs[33]); + else + err |= __put_user(current->thread.vrsave, + (u32 __user *)&tm_v_regs[33]); + +#else /* CONFIG_ALTIVEC */ + err |= __put_user(0, &sc->v_regs); + err |= __put_user(0, &tm_sc->v_regs); +#endif /* CONFIG_ALTIVEC */ + + /* copy fpr regs and fpscr */ + err |= copy_fpr_to_user(&sc->fp_regs, current); + if (msr & MSR_FP) + err |= copy_transact_fpr_to_user(&tm_sc->fp_regs, current); + else + err |= copy_fpr_to_user(&tm_sc->fp_regs, current); + +#ifdef CONFIG_VSX + /* + * Copy VSX low doubleword to local buffer for formatting, + * then out to userspace. Update v_regs to point after the + * VMX data. + */ + if (current->thread.used_vsr) { + __giveup_vsx(current); + v_regs += ELF_NVRREG; + tm_v_regs += ELF_NVRREG; + + err |= copy_vsx_to_user(v_regs, current); + + if (msr & MSR_VSX) + err |= copy_transact_vsx_to_user(tm_v_regs, current); + else + err |= copy_vsx_to_user(tm_v_regs, current); + + /* set MSR_VSX in the MSR value in the frame to + * indicate that sc->vs_reg) contains valid data. + */ + msr |= MSR_VSX; + } +#endif /* CONFIG_VSX */ + + err |= __put_user(&sc->gp_regs, &sc->regs); + err |= __put_user(&tm_sc->gp_regs, &tm_sc->regs); + WARN_ON(!FULL_REGS(regs)); + err |= __copy_to_user(&tm_sc->gp_regs, regs, GP_REGS_SIZE); + err |= __copy_to_user(&sc->gp_regs, + ¤t->thread.ckpt_regs, GP_REGS_SIZE); + err |= __put_user(msr, &tm_sc->gp_regs[PT_MSR]); + err |= __put_user(msr, &sc->gp_regs[PT_MSR]); + err |= __put_user(signr, &sc->signal); + err |= __put_user(handler, &sc->handler); + if (set != NULL) + err |= __put_user(set->sig[0], &sc->oldmask); + + return err; +} +#endif + /* * Restore the sigcontext from the signal frame. */ @@ -241,6 +384,153 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, return err; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * Restore the two sigcontexts from the frame of a transactional processes. + */ + +static long restore_tm_sigcontexts(struct pt_regs *regs, + struct sigcontext __user *sc, + struct sigcontext __user *tm_sc) +{ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs, *tm_v_regs; +#endif + unsigned long err = 0; + unsigned long msr; +#ifdef CONFIG_VSX + int i; +#endif + /* copy the GPRs */ + err |= __copy_from_user(regs->gpr, tm_sc->gp_regs, sizeof(regs->gpr)); + err |= __copy_from_user(¤t->thread.ckpt_regs, sc->gp_regs, + sizeof(regs->gpr)); + + /* + * TFHAR is restored from the checkpointed 'wound-back' ucontext's NIP. + * TEXASR was set by the signal delivery reclaim, as was TFIAR. + * Users doing anything abhorrent like thread-switching w/ signals for + * TM-Suspended code will have to back TEXASR/TFIAR up themselves. + * For the case of getting a signal and simply returning from it, + * we don't need to re-copy them here. + */ + err |= __get_user(regs->nip, &tm_sc->gp_regs[PT_NIP]); + err |= __get_user(current->thread.tm_tfhar, &sc->gp_regs[PT_NIP]); + + /* get MSR separately, transfer the LE bit if doing signal return */ + err |= __get_user(msr, &sc->gp_regs[PT_MSR]); + regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); + + /* The following non-GPR non-FPR non-VR state is also checkpointed: */ + err |= __get_user(regs->ctr, &tm_sc->gp_regs[PT_CTR]); + err |= __get_user(regs->link, &tm_sc->gp_regs[PT_LNK]); + err |= __get_user(regs->xer, &tm_sc->gp_regs[PT_XER]); + err |= __get_user(regs->ccr, &tm_sc->gp_regs[PT_CCR]); + err |= __get_user(current->thread.ckpt_regs.ctr, + &sc->gp_regs[PT_CTR]); + err |= __get_user(current->thread.ckpt_regs.link, + &sc->gp_regs[PT_LNK]); + err |= __get_user(current->thread.ckpt_regs.xer, + &sc->gp_regs[PT_XER]); + err |= __get_user(current->thread.ckpt_regs.ccr, + &sc->gp_regs[PT_CCR]); + + /* These regs are not checkpointed; they can go in 'regs'. */ + err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); + err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]); + err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]); + err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]); + + /* + * Do this before updating the thread state in + * current->thread.fpr/vr. That way, if we get preempted + * and another task grabs the FPU/Altivec, it won't be + * tempted to save the current CPU state into the thread_struct + * and corrupt what we are writing there. + */ + discard_lazy_cpu_state(); + + /* + * Force reload of FP/VEC. + * This has to be done before copying stuff into current->thread.fpr/vr + * for the reasons explained in the previous comment. + */ + regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX); + +#ifdef CONFIG_ALTIVEC + err |= __get_user(v_regs, &sc->v_regs); + err |= __get_user(tm_v_regs, &tm_sc->v_regs); + if (err) + return err; + if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128))) + return -EFAULT; + if (tm_v_regs && !access_ok(VERIFY_READ, + tm_v_regs, 34 * sizeof(vector128))) + return -EFAULT; + /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ + if (v_regs != 0 && tm_v_regs != 0 && (msr & MSR_VEC) != 0) { + err |= __copy_from_user(current->thread.vr, v_regs, + 33 * sizeof(vector128)); + err |= __copy_from_user(current->thread.transact_vr, tm_v_regs, + 33 * sizeof(vector128)); + } + else if (current->thread.used_vr) { + memset(current->thread.vr, 0, 33 * sizeof(vector128)); + memset(current->thread.transact_vr, 0, 33 * sizeof(vector128)); + } + /* Always get VRSAVE back */ + if (v_regs != 0 && tm_v_regs != 0) { + err |= __get_user(current->thread.vrsave, + (u32 __user *)&v_regs[33]); + err |= __get_user(current->thread.transact_vrsave, + (u32 __user *)&tm_v_regs[33]); + } + else { + current->thread.vrsave = 0; + current->thread.transact_vrsave = 0; + } +#endif /* CONFIG_ALTIVEC */ + /* restore floating point */ + err |= copy_fpr_from_user(current, &sc->fp_regs); + err |= copy_transact_fpr_from_user(current, &tm_sc->fp_regs); +#ifdef CONFIG_VSX + /* + * Get additional VSX data. Update v_regs to point after the + * VMX data. Copy VSX low doubleword from userspace to local + * buffer for formatting, then into the taskstruct. + */ + if (v_regs && ((msr & MSR_VSX) != 0)) { + v_regs += ELF_NVRREG; + tm_v_regs += ELF_NVRREG; + err |= copy_vsx_from_user(current, v_regs); + err |= copy_transact_vsx_from_user(current, tm_v_regs); + } else { + for (i = 0; i < 32 ; i++) { + current->thread.fpr[i][TS_VSRLOWOFFSET] = 0; + current->thread.transact_fpr[i][TS_VSRLOWOFFSET] = 0; + } + } +#endif + tm_enable(); + /* This loads the checkpointed FP/VEC state, if used */ + tm_recheckpoint(¤t->thread, msr); + /* The task has moved into TM state S, so ensure MSR reflects this: */ + regs->msr = (regs->msr & ~MSR_TS_MASK) | __MASK(33); + + /* This loads the speculative FP/VEC state, if used */ + if (msr & MSR_FP) { + do_load_up_transact_fpu(¤t->thread); + regs->msr |= (MSR_FP | current->thread.fpexc_mode); + } + if (msr & MSR_VEC) { + do_load_up_transact_altivec(¤t->thread); + regs->msr |= MSR_VEC; + } + + return err; +} +#endif + /* * Setup the trampoline code on the stack */ @@ -355,6 +645,9 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, { struct ucontext __user *uc = (struct ucontext __user *)regs->gpr[1]; sigset_t set; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + unsigned long msr; +#endif /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; @@ -365,6 +658,21 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, if (__copy_from_user(&set, &uc->uc_sigmask, sizeof(set))) goto badframe; set_current_blocked(&set); +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (__get_user(msr, &uc->uc_mcontext.gp_regs[PT_MSR])) + goto badframe; + if (MSR_TM_SUSPENDED(msr)) { + /* We recheckpoint on return. */ + struct ucontext __user *uc_transact; + if (__get_user(uc_transact, &uc->uc_link)) + goto badframe; + if (restore_tm_sigcontexts(regs, &uc->uc_mcontext, + &uc_transact->uc_mcontext)) + goto badframe; + } + else + /* Fall through, for non-TM restore */ +#endif if (restore_sigcontext(regs, NULL, 1, &uc->uc_mcontext)) goto badframe; @@ -415,19 +723,42 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->gpr[1]), &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL, - (unsigned long)ka->sa.sa_handler, 1); +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + /* The ucontext_t passed to userland points to the second + * ucontext_t (for transactional state) with its uc_link ptr. + */ + err |= __put_user(&frame->uc_transact, &frame->uc.uc_link); + err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext, + &frame->uc_transact.uc_mcontext, + regs, signr, + NULL, + (unsigned long)ka->sa.sa_handler); + } else +#endif + { + err |= __put_user(0, &frame->uc.uc_link); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, + NULL, (unsigned long)ka->sa.sa_handler, + 1); + } err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) goto badframe; /* Make sure signal handler doesn't get spurious FP exceptions */ current->thread.fpscr.val = 0; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Remove TM bits from thread's MSR. The MSR in the sigcontext + * just indicates to userland that we were doing a transaction, but we + * don't want to return in transactional state: + */ + regs->msr &= ~MSR_TS_MASK; +#endif /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->mm->context.vdso_base) { diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 793401e..76bd9da 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -610,7 +610,7 @@ static struct device_node *cpu_to_l2cache(int cpu) } /* Activate a secondary processor. */ -void start_secondary(void *unused) +__cpuinit void start_secondary(void *unused) { unsigned int cpu = smp_processor_id(); struct device_node *l2_cache; diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S new file mode 100644 index 0000000..84dbace --- /dev/null +++ b/arch/powerpc/kernel/tm.S @@ -0,0 +1,388 @@ +/* + * Transactional memory support routines to reclaim and recheckpoint + * transactional process state. + * + * Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation. + */ + +#include <asm/asm-offsets.h> +#include <asm/ppc_asm.h> +#include <asm/ppc-opcode.h> +#include <asm/ptrace.h> +#include <asm/reg.h> + +#ifdef CONFIG_VSX +/* See fpu.S, this is very similar but to save/restore checkpointed FPRs/VSRs */ +#define __SAVE_32FPRS_VSRS_TRANSACT(n,c,base) \ +BEGIN_FTR_SECTION \ + b 2f; \ +END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ + SAVE_32FPRS_TRANSACT(n,base); \ + b 3f; \ +2: SAVE_32VSRS_TRANSACT(n,c,base); \ +3: +/* ...and this is just plain borrowed from there. */ +#define __REST_32FPRS_VSRS(n,c,base) \ +BEGIN_FTR_SECTION \ + b 2f; \ +END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ + REST_32FPRS(n,base); \ + b 3f; \ +2: REST_32VSRS(n,c,base); \ +3: +#else +#define __SAVE_32FPRS_VSRS_TRANSACT(n,c,base) SAVE_32FPRS_TRANSACT(n, base) +#define __REST_32FPRS_VSRS(n,c,base) REST_32FPRS(n, base) +#endif +#define SAVE_32FPRS_VSRS_TRANSACT(n,c,base) \ + __SAVE_32FPRS_VSRS_TRANSACT(n,__REG_##c,__REG_##base) +#define REST_32FPRS_VSRS(n,c,base) \ + __REST_32FPRS_VSRS(n,__REG_##c,__REG_##base) + +/* Stack frame offsets for local variables. */ +#define TM_FRAME_L0 TM_FRAME_SIZE-16 +#define TM_FRAME_L1 TM_FRAME_SIZE-8 +#define STACK_PARAM(x) (48+((x)*8)) + + +/* In order to access the TM SPRs, TM must be enabled. So, do so: */ +_GLOBAL(tm_enable) + mfmsr r4 + li r3, MSR_TM >> 32 + sldi r3, r3, 32 + and. r0, r4, r3 + bne 1f + or r4, r4, r3 + mtmsrd r4 +1: blr + +_GLOBAL(tm_save_sprs) + mfspr r0, SPRN_TFHAR + std r0, THREAD_TM_TFHAR(r3) + mfspr r0, SPRN_TEXASR + std r0, THREAD_TM_TEXASR(r3) + mfspr r0, SPRN_TFIAR + std r0, THREAD_TM_TFIAR(r3) + blr + +_GLOBAL(tm_restore_sprs) + ld r0, THREAD_TM_TFHAR(r3) + mtspr SPRN_TFHAR, r0 + ld r0, THREAD_TM_TEXASR(r3) + mtspr SPRN_TEXASR, r0 + ld r0, THREAD_TM_TFIAR(r3) + mtspr SPRN_TFIAR, r0 + blr + + /* Passed an 8-bit failure cause as first argument. */ +_GLOBAL(tm_abort) + TABORT(R3) + blr + + +/* void tm_reclaim(struct thread_struct *thread, + * unsigned long orig_msr, + * uint8_t cause) + * + * - Performs a full reclaim. This destroys outstanding + * transactions and updates thread->regs.tm_ckpt_* with the + * original checkpointed state. Note that thread->regs is + * unchanged. + * - FP regs are written back to thread->transact_fpr before + * reclaiming. These are the transactional (current) versions. + * + * Purpose is to both abort transactions of, and preserve the state of, + * a transactions at a context switch. We preserve/restore both sets of process + * state to restore them when the thread's scheduled again. We continue in + * userland as though nothing happened, but when the transaction is resumed + * they will abort back to the checkpointed state we save out here. + * + * Call with IRQs off, stacks get all out of sync for some periods in here! + */ +_GLOBAL(tm_reclaim) + mfcr r6 + mflr r0 + std r6, 8(r1) + std r0, 16(r1) + std r2, 40(r1) + stdu r1, -TM_FRAME_SIZE(r1) + + /* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */ + + std r3, STACK_PARAM(0)(r1) + SAVE_NVGPRS(r1) + + mfmsr r14 + mr r15, r14 + ori r15, r15, MSR_FP + oris r15, r15, MSR_VEC@h +#ifdef CONFIG_VSX + BEGIN_FTR_SECTION + oris r15,r15, MSR_VSX@h + END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif + mtmsrd r15 + std r14, TM_FRAME_L0(r1) + + /* Stash the stack pointer away for use after reclaim */ + std r1, PACAR1(r13) + + /* ******************** FPR/VR/VSRs ************ + * Before reclaiming, capture the current/transactional FPR/VR + * versions /if used/. + * + * (If VSX used, FP and VMX are implied. Or, we don't need to look + * at MSR.VSX as copying FP regs if .FP, vector regs if .VMX covers it.) + * + * We're passed the thread's MSR as parameter 2. + * + * We enabled VEC/FP/VSX in the msr above, so we can execute these + * instructions! + */ + andis. r0, r4, MSR_VEC@h + beq dont_backup_vec + + SAVE_32VRS_TRANSACT(0, r6, r3) /* r6 scratch, r3 thread */ + mfvscr vr0 + li r6, THREAD_TRANSACT_VSCR + stvx vr0, r3, r6 + mfspr r0, SPRN_VRSAVE + std r0, THREAD_TRANSACT_VRSAVE(r3) + +dont_backup_vec: + andi. r0, r4, MSR_FP + beq dont_backup_fp + + SAVE_32FPRS_VSRS_TRANSACT(0, R6, R3) /* r6 scratch, r3 thread */ + + mffs fr0 + stfd fr0,THREAD_TRANSACT_FPSCR(r3) + +dont_backup_fp: + /* The moment we treclaim, ALL of our GPRs will switch + * to user register state. (FPRs, CCR etc. also!) + * Use an sprg and a tm_scratch in the PACA to shuffle. + */ + TRECLAIM(R5) /* Cause in r5 */ + + /* ******************** GPRs ******************** */ + /* Stash the checkpointed r13 away in the scratch SPR and get the real + * paca + */ + SET_SCRATCH0(r13) + GET_PACA(r13) + + /* Stash the checkpointed r1 away in paca tm_scratch and get the real + * stack pointer back + */ + std r1, PACATMSCRATCH(r13) + ld r1, PACAR1(r13) + + /* Now get some more GPRS free */ + std r7, GPR7(r1) /* Temporary stash */ + std r12, GPR12(r1) /* '' '' '' */ + ld r12, STACK_PARAM(0)(r1) /* Param 0, thread_struct * */ + + addi r7, r12, PT_CKPT_REGS /* Thread's ckpt_regs */ + + /* Make r7 look like an exception frame so that we + * can use the neat GPRx(n) macros. r7 is NOT a pt_regs ptr! + */ + subi r7, r7, STACK_FRAME_OVERHEAD + + /* Sync the userland GPRs 2-12, 14-31 to thread->regs: */ + SAVE_GPR(0, r7) /* user r0 */ + SAVE_GPR(2, r7) /* user r2 */ + SAVE_4GPRS(3, r7) /* user r3-r6 */ + SAVE_4GPRS(8, r7) /* user r8-r11 */ + ld r3, PACATMSCRATCH(r13) /* user r1 */ + ld r4, GPR7(r1) /* user r7 */ + ld r5, GPR12(r1) /* user r12 */ + GET_SCRATCH0(6) /* user r13 */ + std r3, GPR1(r7) + std r4, GPR7(r7) + std r5, GPR12(r7) + std r6, GPR13(r7) + + SAVE_NVGPRS(r7) /* user r14-r31 */ + + /* ******************** NIP ******************** */ + mfspr r3, SPRN_TFHAR + std r3, _NIP(r7) /* Returns to failhandler */ + /* The checkpointed NIP is ignored when rescheduling/rechkpting, + * but is used in signal return to 'wind back' to the abort handler. + */ + + /* ******************** CR,LR,CCR,MSR ********** */ + mfctr r3 + mflr r4 + mfcr r5 + mfxer r6 + + std r3, _CTR(r7) + std r4, _LINK(r7) + std r5, _CCR(r7) + std r6, _XER(r7) + + /* MSR and flags: We don't change CRs, and we don't need to alter + * MSR. + */ + + /* TM regs, incl TEXASR -- these live in thread_struct. Note they've + * been updated by the treclaim, to explain to userland the failure + * cause (aborted). + */ + mfspr r0, SPRN_TEXASR + mfspr r3, SPRN_TFHAR + mfspr r4, SPRN_TFIAR + std r0, THREAD_TM_TEXASR(r12) + std r3, THREAD_TM_TFHAR(r12) + std r4, THREAD_TM_TFIAR(r12) + + /* AMR and PPR are checkpointed too, but are unsupported by Linux. */ + + /* Restore original MSR/IRQ state & clear TM mode */ + ld r14, TM_FRAME_L0(r1) /* Orig MSR */ + li r15, 0 + rldimi r14, r15, MSR_TS_LG, (63-MSR_TS_LG)-1 + mtmsrd r14 + + REST_NVGPRS(r1) + + addi r1, r1, TM_FRAME_SIZE + ld r4, 8(r1) + ld r0, 16(r1) + mtcr r4 + mtlr r0 + ld r2, 40(r1) + blr + + + /* void tm_recheckpoint(struct thread_struct *thread, + * unsigned long orig_msr) + * - Restore the checkpointed register state saved by tm_reclaim + * when we switch_to a process. + * + * Call with IRQs off, stacks get all out of sync for + * some periods in here! + */ +_GLOBAL(tm_recheckpoint) + mfcr r5 + mflr r0 + std r5, 8(r1) + std r0, 16(r1) + std r2, 40(r1) + stdu r1, -TM_FRAME_SIZE(r1) + + /* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. + * This is used for backing up the NVGPRs: + */ + SAVE_NVGPRS(r1) + + std r1, PACAR1(r13) + + /* Load complete register state from ts_ckpt* registers */ + + addi r7, r3, PT_CKPT_REGS /* Thread's ckpt_regs */ + + /* Make r7 look like an exception frame so that we + * can use the neat GPRx(n) macros. r7 is now NOT a pt_regs ptr! + */ + subi r7, r7, STACK_FRAME_OVERHEAD + + SET_SCRATCH0(r1) + + mfmsr r6 + /* R4 = original MSR to indicate whether thread used FP/Vector etc. */ + + /* Enable FP/vec in MSR if necessary! */ + lis r5, MSR_VEC@h + ori r5, r5, MSR_FP + and. r5, r4, r5 + beq restore_gprs /* if neither, skip both */ + +#ifdef CONFIG_VSX + BEGIN_FTR_SECTION + oris r5, r5, MSR_VSX@h + END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif + or r5, r6, r5 /* Set MSR.FP+.VSX/.VEC */ + mtmsr r5 + + /* FP and VEC registers: These are recheckpointed from thread.fpr[] + * and thread.vr[] respectively. The thread.transact_fpr[] version + * is more modern, and will be loaded subsequently by any FPUnavailable + * trap. + */ + andis. r0, r4, MSR_VEC@h + beq dont_restore_vec + + li r5, THREAD_VSCR + lvx vr0, r3, r5 + mtvscr vr0 + REST_32VRS(0, r5, r3) /* r5 scratch, r3 THREAD ptr */ + ld r5, THREAD_VRSAVE(r3) + mtspr SPRN_VRSAVE, r5 + +dont_restore_vec: + andi. r0, r4, MSR_FP + beq dont_restore_fp + + lfd fr0, THREAD_FPSCR(r3) + MTFSF_L(fr0) + REST_32FPRS_VSRS(0, R4, R3) + +dont_restore_fp: + mtmsr r6 /* FP/Vec off again! */ + +restore_gprs: + /* ******************** CR,LR,CCR,MSR ********** */ + ld r3, _CTR(r7) + ld r4, _LINK(r7) + ld r5, _CCR(r7) + ld r6, _XER(r7) + + mtctr r3 + mtlr r4 + mtcr r5 + mtxer r6 + + /* MSR and flags: We don't change CRs, and we don't need to alter + * MSR. + */ + + REST_4GPRS(0, r7) /* GPR0-3 */ + REST_GPR(4, r7) /* GPR4-6 */ + REST_GPR(5, r7) + REST_GPR(6, r7) + REST_4GPRS(8, r7) /* GPR8-11 */ + REST_2GPRS(12, r7) /* GPR12-13 */ + + REST_NVGPRS(r7) /* GPR14-31 */ + + ld r7, GPR7(r7) /* GPR7 */ + + /* Commit register state as checkpointed state: */ + TRECHKPT + + /* Our transactional state has now changed. + * + * Now just get out of here. Transactional (current) state will be + * updated once restore is called on the return path in the _switch-ed + * -to process. + */ + + GET_PACA(r13) + GET_SCRATCH0(r1) + + REST_NVGPRS(r1) + + addi r1, r1, TM_FRAME_SIZE + ld r4, 8(r1) + ld r0, 16(r1) + mtcr r4 + mtlr r0 + ld r2, 40(r1) + blr + + /* ****************************************************************** */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 3251840..f9b751b 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -58,6 +58,7 @@ #include <asm/rio.h> #include <asm/fadump.h> #include <asm/switch_to.h> +#include <asm/tm.h> #include <asm/debug.h> #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) @@ -66,7 +67,7 @@ int (*__debugger_ipi)(struct pt_regs *regs) __read_mostly; int (*__debugger_bpt)(struct pt_regs *regs) __read_mostly; int (*__debugger_sstep)(struct pt_regs *regs) __read_mostly; int (*__debugger_iabr_match)(struct pt_regs *regs) __read_mostly; -int (*__debugger_dabr_match)(struct pt_regs *regs) __read_mostly; +int (*__debugger_break_match)(struct pt_regs *regs) __read_mostly; int (*__debugger_fault_handler)(struct pt_regs *regs) __read_mostly; EXPORT_SYMBOL(__debugger); @@ -74,10 +75,17 @@ EXPORT_SYMBOL(__debugger_ipi); EXPORT_SYMBOL(__debugger_bpt); EXPORT_SYMBOL(__debugger_sstep); EXPORT_SYMBOL(__debugger_iabr_match); -EXPORT_SYMBOL(__debugger_dabr_match); +EXPORT_SYMBOL(__debugger_break_match); EXPORT_SYMBOL(__debugger_fault_handler); #endif +/* Transactional Memory trap debug */ +#ifdef TM_DEBUG_SW +#define TM_DEBUG(x...) printk(KERN_INFO x) +#else +#define TM_DEBUG(x...) do { } while(0) +#endif + /* * Trap & Exception support */ @@ -350,6 +358,7 @@ static inline int check_io_access(struct pt_regs *regs) exception is in the MSR. */ #define get_reason(regs) ((regs)->msr) #define get_mc_reason(regs) ((regs)->msr) +#define REASON_TM 0x200000 #define REASON_FP 0x100000 #define REASON_ILLEGAL 0x80000 #define REASON_PRIVILEGED 0x40000 @@ -1020,6 +1029,38 @@ void __kprobes program_check_exception(struct pt_regs *regs) _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip); return; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (reason & REASON_TM) { + /* This is a TM "Bad Thing Exception" program check. + * This occurs when: + * - An rfid/hrfid/mtmsrd attempts to cause an illegal + * transition in TM states. + * - A trechkpt is attempted when transactional. + * - A treclaim is attempted when non transactional. + * - A tend is illegally attempted. + * - writing a TM SPR when transactional. + */ + if (!user_mode(regs) && + report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { + regs->nip += 4; + return; + } + /* If usermode caused this, it's done something illegal and + * gets a SIGILL slap on the wrist. We call it an illegal + * operand to distinguish from the instruction just being bad + * (e.g. executing a 'tend' on a CPU without TM!); it's an + * illegal /placement/ of a valid instruction. + */ + if (user_mode(regs)) { + _exception(SIGILL, regs, ILL_ILLOPN, regs->nip); + return; + } else { + printk(KERN_EMERG "Unexpected TM Bad Thing exception " + "at %lx (msr 0x%x)\n", regs->nip, reason); + die("Unrecoverable exception", regs, SIGABRT); + } + } +#endif /* We restore the interrupt state now */ if (!arch_irq_disabled_regs(regs)) @@ -1160,6 +1201,109 @@ void vsx_unavailable_exception(struct pt_regs *regs) die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT); } +void tm_unavailable_exception(struct pt_regs *regs) +{ + /* We restore the interrupt state now */ + if (!arch_irq_disabled_regs(regs)) + local_irq_enable(); + + /* Currently we never expect a TMU exception. Catch + * this and kill the process! + */ + printk(KERN_EMERG "Unexpected TM unavailable exception at %lx " + "(msr %lx)\n", + regs->nip, regs->msr); + + if (user_mode(regs)) { + _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + return; + } + + die("Unexpected TM unavailable exception", regs, SIGABRT); +} + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + +extern void do_load_up_fpu(struct pt_regs *regs); + +void fp_unavailable_tm(struct pt_regs *regs) +{ + /* Note: This does not handle any kind of FP laziness. */ + + TM_DEBUG("FP Unavailable trap whilst transactional at 0x%lx, MSR=%lx\n", + regs->nip, regs->msr); + tm_enable(); + + /* We can only have got here if the task started using FP after + * beginning the transaction. So, the transactional regs are just a + * copy of the checkpointed ones. But, we still need to recheckpoint + * as we're enabling FP for the process; it will return, abort the + * transaction, and probably retry but now with FP enabled. So the + * checkpointed FP registers need to be loaded. + */ + tm_reclaim(¤t->thread, current->thread.regs->msr, + TM_CAUSE_FAC_UNAV); + /* Reclaim didn't save out any FPRs to transact_fprs. */ + + /* Enable FP for the task: */ + regs->msr |= (MSR_FP | current->thread.fpexc_mode); + + /* This loads and recheckpoints the FP registers from + * thread.fpr[]. They will remain in registers after the + * checkpoint so we don't need to reload them after. + */ + tm_recheckpoint(¤t->thread, regs->msr); +} + +#ifdef CONFIG_ALTIVEC +extern void do_load_up_altivec(struct pt_regs *regs); + +void altivec_unavailable_tm(struct pt_regs *regs) +{ + /* See the comments in fp_unavailable_tm(). This function operates + * the same way. + */ + + TM_DEBUG("Vector Unavailable trap whilst transactional at 0x%lx," + "MSR=%lx\n", + regs->nip, regs->msr); + tm_enable(); + tm_reclaim(¤t->thread, current->thread.regs->msr, + TM_CAUSE_FAC_UNAV); + regs->msr |= MSR_VEC; + tm_recheckpoint(¤t->thread, regs->msr); + current->thread.used_vr = 1; +} +#endif + +#ifdef CONFIG_VSX +void vsx_unavailable_tm(struct pt_regs *regs) +{ + /* See the comments in fp_unavailable_tm(). This works similarly, + * though we're loading both FP and VEC registers in here. + * + * If FP isn't in use, load FP regs. If VEC isn't in use, load VEC + * regs. Either way, set MSR_VSX. + */ + + TM_DEBUG("VSX Unavailable trap whilst transactional at 0x%lx," + "MSR=%lx\n", + regs->nip, regs->msr); + + tm_enable(); + /* This reclaims FP and/or VR regs if they're already enabled */ + tm_reclaim(¤t->thread, current->thread.regs->msr, + TM_CAUSE_FAC_UNAV); + + regs->msr |= MSR_VEC | MSR_FP | current->thread.fpexc_mode | + MSR_VSX; + /* This loads & recheckpoints FP and VRs. */ + tm_recheckpoint(¤t->thread, regs->msr); + current->thread.used_vsr = 1; +} +#endif +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + void performance_monitor_exception(struct pt_regs *regs) { __get_cpu_var(irq_stat).pmu_irqs++; @@ -1515,7 +1659,7 @@ void unrecoverable_exception(struct pt_regs *regs) die("Unrecoverable exception", regs, SIGABRT); } -#ifdef CONFIG_BOOKE_WDT +#if defined(CONFIG_BOOKE_WDT) || defined(CONFIG_40x) /* * Default handler for a Watchdog exception, * spins until a reboot occurs diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index e830289..9e20999 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -7,6 +7,57 @@ #include <asm/page.h> #include <asm/ptrace.h> +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * Wrapper to call load_up_altivec from C. + * void do_load_up_altivec(struct pt_regs *regs); + */ +_GLOBAL(do_load_up_altivec) + mflr r0 + std r0, 16(r1) + stdu r1, -112(r1) + + subi r6, r3, STACK_FRAME_OVERHEAD + /* load_up_altivec expects r12=MSR, r13=PACA, and returns + * with r12 = new MSR. + */ + ld r12,_MSR(r6) + GET_PACA(r13) + bl load_up_altivec + std r12,_MSR(r6) + + ld r0, 112+16(r1) + addi r1, r1, 112 + mtlr r0 + blr + +/* void do_load_up_transact_altivec(struct thread_struct *thread) + * + * This is similar to load_up_altivec but for the transactional version of the + * vector regs. It doesn't mess with the task MSR or valid flags. + * Furthermore, VEC laziness is not supported with TM currently. + */ +_GLOBAL(do_load_up_transact_altivec) + mfmsr r6 + oris r5,r6,MSR_VEC@h + MTMSRD(r5) + isync + + li r4,1 + stw r4,THREAD_USED_VR(r3) + + li r10,THREAD_TRANSACT_VSCR + lvx vr0,r10,r3 + mtvscr vr0 + REST_32VRS_TRANSACT(0,r4,r3) + + /* Disable VEC again. */ + MTMSRD(r6) + isync + + blr +#endif + /* * load_up_altivec(unused, unused, tsk) * Disable VMX for the task which had it previously, diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 65d1c08..654e479 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -218,6 +218,11 @@ SECTIONS .got : AT(ADDR(.got) - LOAD_OFFSET) { __toc_start = .; +#ifndef CONFIG_RELOCATABLE + __prom_init_toc_start = .; + arch/powerpc/kernel/prom_init.o*(.toc .got) + __prom_init_toc_end = .; +#endif *(.got) *(.toc) } diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 10b6c35..e33d11f 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -539,6 +539,11 @@ fast_guest_return: /* Enter guest */ +BEGIN_FTR_SECTION + ld r5, VCPU_CFAR(r4) + mtspr SPRN_CFAR, r5 +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) + ld r5, VCPU_LR(r4) lwz r6, VCPU_CR(r4) mtlr r5 @@ -604,6 +609,10 @@ kvmppc_interrupt: lwz r4, HSTATE_SCRATCH1(r13) std r3, VCPU_GPR(R12)(r9) stw r4, VCPU_CR(r9) +BEGIN_FTR_SECTION + ld r3, HSTATE_CFAR(r13) + std r3, VCPU_CFAR(r9) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) /* Restore R1/R2 so we can handle faults */ ld r1, HSTATE_HOST_R1(r13) diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index 28d38ad..6702442 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -34,6 +34,8 @@ #include <asm/kvm_book3s.h> #include <asm/mmu_context.h> #include <asm/switch_to.h> +#include <asm/firmware.h> +#include <asm/hvcall.h> #include <linux/gfp.h> #include <linux/sched.h> #include <linux/vmalloc.h> @@ -1284,12 +1286,21 @@ void kvmppc_core_flush_memslot(struct kvm *kvm, struct kvm_memory_slot *memslot) { } +static unsigned int kvm_global_user_count = 0; +static DEFINE_SPINLOCK(kvm_global_user_count_lock); + int kvmppc_core_init_vm(struct kvm *kvm) { #ifdef CONFIG_PPC64 INIT_LIST_HEAD(&kvm->arch.spapr_tce_tables); #endif + if (firmware_has_feature(FW_FEATURE_SET_MODE)) { + spin_lock(&kvm_global_user_count_lock); + if (++kvm_global_user_count == 1) + pSeries_disable_reloc_on_exc(); + spin_unlock(&kvm_global_user_count_lock); + } return 0; } @@ -1298,6 +1309,14 @@ void kvmppc_core_destroy_vm(struct kvm *kvm) #ifdef CONFIG_PPC64 WARN_ON(!list_empty(&kvm->arch.spapr_tce_tables)); #endif + + if (firmware_has_feature(FW_FEATURE_SET_MODE)) { + spin_lock(&kvm_global_user_count_lock); + BUG_ON(kvm_global_user_count == 0); + if (--kvm_global_user_count == 0) + pSeries_enable_reloc_on_exc(); + spin_unlock(&kvm_global_user_count_lock); + } } static int kvmppc_book3s_init(void) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 746e0c8..4504332 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -4,7 +4,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) CFLAGS_REMOVE_code-patching.o = -pg CFLAGS_REMOVE_feature-fixups.o = -pg @@ -19,9 +19,7 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ checksum_wrappers_64.o hweight_64.o \ copyuser_power7.o string_64.o copypage_power7.o \ memcpy_power7.o -obj-$(CONFIG_XMON) += sstep.o ldstfp.o -obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o -obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o +obj-$(CONFIG_PPC_EMULATE_SSTEP) += sstep.o ldstfp.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 3787b61..cf16b57 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -4,7 +4,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) obj-y := fault.o mem.o pgtable.o gup.o \ init_$(CONFIG_WORD_SIZE).o \ diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 3a8489a..229951f 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -249,8 +249,8 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE) || \ defined(CONFIG_PPC_BOOK3S_64)) if (error_code & DSISR_DABRMATCH) { - /* DABR match */ - do_dabr(regs, address, error_code); + /* breakpoint match */ + do_break(regs, address, error_code); return 0; } #endif diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 3a292be..1b6e127 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -55,6 +55,7 @@ #include <asm/code-patching.h> #include <asm/fadump.h> #include <asm/firmware.h> +#include <asm/tm.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -1171,6 +1172,21 @@ void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, int ssize, DBG_LOW(" sub %ld: hash=%lx, hidx=%lx\n", index, slot, hidx); ppc_md.hpte_invalidate(slot, vpn, psize, ssize, local); } pte_iterate_hashed_end(); + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Transactions are not aborted by tlbiel, only tlbie. + * Without, syncing a page back to a block device w/ PIO could pick up + * transactional data (bad!) so we force an abort here. Before the + * sync the page will be made read-only, which will flush_hash_page. + * BIG ISSUE here: if the kernel uses a page from userspace without + * unmapping it first, it may see the speculated version. + */ + if (local && cpu_has_feature(CPU_FTR_TM) && + MSR_TM_ACTIVE(current->thread.regs->msr)) { + tm_enable(); + tm_abort(TM_CAUSE_TLBI); + } +#endif } void flush_hash_range(unsigned long number, int local) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 0dba506..40df7c8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -195,13 +195,10 @@ void __init do_init_bootmem(void) min_low_pfn = MEMORY_START >> PAGE_SHIFT; boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn); - /* Add active regions with valid PFNs */ - for_each_memblock(memory, reg) { - unsigned long start_pfn, end_pfn; - start_pfn = memblock_region_memory_base_pfn(reg); - end_pfn = memblock_region_memory_end_pfn(reg); - memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0); - } + /* Place all memblock_regions in the same node and merge contiguous + * memblock_regions + */ + memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0); /* Add all physical memory to the bootmem map, mark each area * present. diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 73456c4..751ec7b 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -1,6 +1,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) obj-$(CONFIG_OPROFILE) += oprofile.o diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index fa476d5..65362e9 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -880,8 +880,16 @@ static int power_pmu_add(struct perf_event *event, int ef_flags) cpuhw->events[n0] = event->hw.config; cpuhw->flags[n0] = event->hw.event_base; + /* + * This event may have been disabled/stopped in record_and_restart() + * because we exceeded the ->event_limit. If re-starting the event, + * clear the ->hw.state (STOPPED and UPTODATE flags), so the user + * notification is re-enabled. + */ if (!(ef_flags & PERF_EF_START)) event->hw.state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + else + event->hw.state = 0; /* * If group events scheduling transaction was started, @@ -1359,6 +1367,8 @@ static void record_and_restart(struct perf_event *event, unsigned long val, */ val = 0; left = local64_read(&event->hw.period_left) - delta; + if (delta == 0) + left++; if (period) { if (left <= 0) { left += period; @@ -1422,11 +1432,8 @@ unsigned long perf_instruction_pointer(struct pt_regs *regs) return regs->nip; } -static bool pmc_overflow(unsigned long val) +static bool pmc_overflow_power7(unsigned long val) { - if ((int)val < 0) - return true; - /* * Events on POWER7 can roll back if a speculative event doesn't * eventually complete. Unfortunately in some rare cases they will @@ -1438,7 +1445,15 @@ static bool pmc_overflow(unsigned long val) * PMCs because a user might set a period of less than 256 and we * don't want to mistakenly reset them. */ - if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256)) + if ((0x80000000 - val) <= 256) + return true; + + return false; +} + +static bool pmc_overflow(unsigned long val) +{ + if ((int)val < 0) return true; return false; @@ -1449,11 +1464,11 @@ static bool pmc_overflow(unsigned long val) */ static void perf_event_interrupt(struct pt_regs *regs) { - int i; + int i, j; struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); struct perf_event *event; - unsigned long val; - int found = 0; + unsigned long val[8]; + int found, active; int nmi; if (cpuhw->n_limited) @@ -1468,33 +1483,53 @@ static void perf_event_interrupt(struct pt_regs *regs) else irq_enter(); - for (i = 0; i < cpuhw->n_events; ++i) { - event = cpuhw->event[i]; - if (!event->hw.idx || is_limited_pmc(event->hw.idx)) + /* Read all the PMCs since we'll need them a bunch of times */ + for (i = 0; i < ppmu->n_counter; ++i) + val[i] = read_pmc(i + 1); + + /* Try to find what caused the IRQ */ + found = 0; + for (i = 0; i < ppmu->n_counter; ++i) { + if (!pmc_overflow(val[i])) continue; - val = read_pmc(event->hw.idx); - if ((int)val < 0) { - /* event has overflowed */ - found = 1; - record_and_restart(event, val, regs); + if (is_limited_pmc(i + 1)) + continue; /* these won't generate IRQs */ + /* + * We've found one that's overflowed. For active + * counters we need to log this. For inactive + * counters, we need to reset it anyway + */ + found = 1; + active = 0; + for (j = 0; j < cpuhw->n_events; ++j) { + event = cpuhw->event[j]; + if (event->hw.idx == (i + 1)) { + active = 1; + record_and_restart(event, val[i], regs); + break; + } } + if (!active) + /* reset non active counters that have overflowed */ + write_pmc(i + 1, 0); } - - /* - * In case we didn't find and reset the event that caused - * the interrupt, scan all events and reset any that are - * negative, to avoid getting continual interrupts. - * Any that we processed in the previous loop will not be negative. - */ - if (!found) { - for (i = 0; i < ppmu->n_counter; ++i) { - if (is_limited_pmc(i + 1)) + if (!found && pvr_version_is(PVR_POWER7)) { + /* check active counters for special buggy p7 overflow */ + for (i = 0; i < cpuhw->n_events; ++i) { + event = cpuhw->event[i]; + if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; - val = read_pmc(i + 1); - if (pmc_overflow(val)) - write_pmc(i + 1, 0); + if (pmc_overflow_power7(val[event->hw.idx - 1])) { + /* event has overflowed in a buggy way*/ + found = 1; + record_and_restart(event, + val[event->hw.idx - 1], + regs); + } } } + if ((!found) && printk_ratelimit()) + printk(KERN_WARNING "Can't find PMC that caused IRQ\n"); /* * Reset MMCR0 to its normal value. This will set PMXE and diff --git a/arch/powerpc/perf/e500-pmu.c b/arch/powerpc/perf/e500-pmu.c index cb2e294..fb66492 100644 --- a/arch/powerpc/perf/e500-pmu.c +++ b/arch/powerpc/perf/e500-pmu.c @@ -24,6 +24,8 @@ static int e500_generic_events[] = { [PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12, [PERF_COUNT_HW_BRANCH_MISSES] = 15, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 18, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 19, }; #define C(x) PERF_COUNT_HW_CACHE_##x diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 8abf6fb8..0effe9f 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -252,6 +252,14 @@ config PPC4xx_GPIO help Enable gpiolib support for ppc440 based boards +config PPC4xx_OCM + bool "PPC4xx On Chip Memory (OCM) support" + depends on 4xx + select PPC_LIB_RHEAP + help + Enable OCM support for PowerPC 4xx platforms with on chip memory, + OCM provides the fast place for memory access to improve performance. + # 44x specific CPU modules, selected based on the board above. config 440EP bool diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 9f771e0..52d57d2 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -26,6 +26,7 @@ #include <linux/of_platform.h> #include <asm/mpc5xxx.h> +#include <asm/mpc5121.h> #include <asm/clk_interface.h> #undef CLK_DEBUG @@ -122,7 +123,7 @@ struct mpc512x_clockctl { u32 dccr; /* DIU Clk Cnfg Reg */ }; -struct mpc512x_clockctl __iomem *clockctl; +static struct mpc512x_clockctl __iomem *clockctl; static int mpc5121_clk_enable(struct clk *clk) { @@ -184,7 +185,7 @@ static unsigned long spmf_mult(void) 36, 40, 44, 48, 52, 56, 60, 64 }; - int spmf = (clockctl->spmr >> 24) & 0xf; + int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf; return spmf_to_mult[spmf]; } @@ -206,7 +207,7 @@ static unsigned long sysdiv_div_x_2(void) 52, 56, 58, 62, 60, 64, 66, }; - int sysdiv = (clockctl->scfr2 >> 26) & 0x3f; + int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f; return sysdiv_to_div_x_2[sysdiv]; } @@ -230,7 +231,7 @@ static unsigned long sys_to_ref(unsigned long rate) static long ips_to_ref(unsigned long rate) { - int ips_div = (clockctl->scfr1 >> 23) & 0x7; + int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7; rate *= ips_div; /* csb_clk = ips_clk * ips_div */ rate *= 2; /* sys_clk = csb_clk * 2 */ @@ -284,7 +285,7 @@ static struct clk sys_clk = { static void diu_clk_calc(struct clk *clk) { - int diudiv_x_2 = clockctl->scfr1 & 0xff; + int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff; unsigned long rate; rate = sys_clk.rate; @@ -311,7 +312,7 @@ static void half_clk_calc(struct clk *clk) static void generic_div_clk_calc(struct clk *clk) { - int div = (clockctl->scfr1 >> clk->div_shift) & 0x7; + int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7; clk->rate = clk->parent->rate / div; } @@ -329,7 +330,7 @@ static struct clk csb_clk = { static void e300_clk_calc(struct clk *clk) { - int spmf = (clockctl->spmr >> 16) & 0xf; + int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf; int ratex2 = clk->parent->rate * spmf; clk->rate = ratex2 / 2; @@ -551,7 +552,7 @@ static struct clk ac97_clk = { .calc = ac97_clk_calc, }; -struct clk *rate_clks[] = { +static struct clk *rate_clks[] = { &ref_clk, &sys_clk, &diu_clk, @@ -607,7 +608,7 @@ static void rate_clks_init(void) * There are two clk enable registers with 32 enable bits each * psc clocks and device clocks are all stored in dev_clks */ -struct clk dev_clks[2][32]; +static struct clk dev_clks[2][32]; /* * Given a psc number return the dev_clk @@ -648,12 +649,12 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) out_be32(&clockctl->pccr[pscnum], 0x00020000); out_be32(&clockctl->pccr[pscnum], 0x00030000); - if (clockctl->pccr[pscnum] & 0x80) { + if (in_be32(&clockctl->pccr[pscnum]) & 0x80) { clk->rate = spdif_rxclk.rate; return; } - switch ((clockctl->pccr[pscnum] >> 14) & 0x3) { + switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) { case 0: mclk_src = sys_clk.rate; break; @@ -668,7 +669,7 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) break; } - mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1; + mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1; clk->rate = mclk_src / mclk_div; } @@ -680,13 +681,12 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) static void psc_clks_init(void) { struct device_node *np; - const u32 *cell_index; struct platform_device *ofdev; + u32 reg; for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") { - cell_index = of_get_property(np, "cell-index", NULL); - if (cell_index) { - int pscnum = *cell_index; + if (!of_property_read_u32(np, "reg", ®)) { + int pscnum = (reg & 0xf00) >> 8; struct clk *clk = psc_dev_clk(pscnum); clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL; @@ -696,7 +696,7 @@ static void psc_clks_init(void) * AC97 is special rate clock does * not go through normal path */ - if (strcmp("ac97", np->name) == 0) + if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97")) clk->rate = ac97_clk.rate; else psc_calc_rate(clk, pscnum, np); diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 35f14fd..d30235b 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -68,10 +68,6 @@ struct fsl_diu_shared_fb { bool in_use; }; -void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port) -{ -} - #define DIU_DIV_MASK 0x000000ff void mpc512x_set_pixel_clock(unsigned int pixclock) { @@ -303,7 +299,6 @@ void __init mpc512x_setup_diu(void) } } - diu_ops.set_monitor_port = mpc512x_set_monitor_port; diu_ops.set_pixel_clock = mpc512x_set_pixel_clock; diu_ops.valid_monitor_port = mpc512x_valid_monitor_port; diu_ops.release_bootmem = mpc512x_release_bootmem; @@ -431,8 +426,38 @@ void __init mpc512x_psc_fifo_init(void) void __init mpc512x_init(void) { - mpc512x_declare_of_platform_devices(); mpc5121_clk_init(); + mpc512x_declare_of_platform_devices(); mpc512x_restart_init(); mpc512x_psc_fifo_init(); } + +/** + * mpc512x_cs_config - Setup chip select configuration + * @cs: chip select number + * @val: chip select configuration value + * + * Perform chip select configuration for devices on LocalPlus Bus. + * Intended to dynamically reconfigure the chip select parameters + * for configurable devices on the bus. + */ +int mpc512x_cs_config(unsigned int cs, u32 val) +{ + static struct mpc512x_lpc __iomem *lpc; + struct device_node *np; + + if (cs > 7) + return -EINVAL; + + if (!lpc) { + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-lpc"); + lpc = of_iomap(np, 0); + of_node_put(np); + if (!lpc) + return -ENOMEM; + } + + out_be32(&lpc->cs_cfg[cs], val); + return 0; +} +EXPORT_SYMBOL(mpc512x_cs_config); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index f9f4537..be7b1aa 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -20,9 +20,9 @@ #include <asm/mpc52xx.h> #include <asm/time.h> -#include <sysdev/bestcomm/bestcomm.h> -#include <sysdev/bestcomm/bestcomm_priv.h> -#include <sysdev/bestcomm/gen_bd.h> +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/bestcomm_priv.h> +#include <linux/fsl/bestcomm/gen_bd.h> MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver"); diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c index cf964e1..058cc18 100644 --- a/arch/powerpc/platforms/82xx/km82xx.c +++ b/arch/powerpc/platforms/82xx/km82xx.c @@ -18,11 +18,11 @@ #include <linux/fsl_devices.h> #include <linux/of_platform.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/cpm2.h> #include <asm/udbg.h> #include <asm/machdep.h> -#include <asm/time.h> +#include <linux/time.h> #include <asm/mpc8260.h> #include <asm/prom.h> @@ -36,7 +36,7 @@ static void __init km82xx_pic_init(void) struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic"); if (!np) { - printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + pr_err("PIC init: can not find cpm-pic node\n"); return; } diff --git a/arch/powerpc/platforms/82xx/pq2.c b/arch/powerpc/platforms/82xx/pq2.c index fb94d10..fc8b2d6 100644 --- a/arch/powerpc/platforms/82xx/pq2.c +++ b/arch/powerpc/platforms/82xx/pq2.c @@ -71,11 +71,11 @@ err: void __init pq2_init_pci(void) { - struct device_node *np = NULL; + struct device_node *np; ppc_md.pci_exclude_device = pq2_pci_exclude_device; - while ((np = of_find_compatible_node(np, NULL, "fsl,pq2-pci"))) + for_each_compatible_node(np, NULL, "fsl,pq2-pci") pq2_pci_add_bridge(np); } #endif diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c index 89923d7..bf4c447 100644 --- a/arch/powerpc/platforms/83xx/km83xx.c +++ b/arch/powerpc/platforms/83xx/km83xx.c @@ -28,8 +28,8 @@ #include <linux/of_device.h> #include <linux/atomic.h> -#include <asm/time.h> -#include <asm/io.h> +#include <linux/time.h> +#include <linux/io.h> #include <asm/machdep.h> #include <asm/ipic.h> #include <asm/irq.h> @@ -43,6 +43,82 @@ #include "mpc83xx.h" #define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ + +static void quirk_mpc8360e_qe_enet10(void) +{ + /* + * handle mpc8360E Erratum QE_ENET10: + * RGMII AC values do not meet the specification + */ + uint svid = mfspr(SPRN_SVR); + struct device_node *np_par; + struct resource res; + void __iomem *base; + int ret; + + np_par = of_find_node_by_name(NULL, "par_io"); + if (np_par == NULL) { + pr_warn("%s couldn;t find par_io node\n", __func__); + return; + } + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np_par, 0, &res); + if (ret) { + pr_warn("%s couldn;t map par_io registers\n", __func__); + return; + } + + base = ioremap(res.start, res.end - res.start + 1); + + /* + * set output delay adjustments to default values according + * table 5 in Errata Rev. 5, 9/2011: + * + * write 0b01 to UCC1 bits 18:19 + * write 0b01 to UCC2 option 1 bits 4:5 + * write 0b01 to UCC2 option 2 bits 16:17 + */ + clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); + + /* + * set output delay adjustments to default values according + * table 3-13 in Reference Manual Rev.3 05/2010: + * + * write 0b01 to UCC2 option 2 bits 16:17 + * write 0b0101 to UCC1 bits 20:23 + * write 0b0101 to UCC2 option 1 bits 24:27 + */ + clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); + + if (SVR_REV(svid) == 0x0021) { + /* + * UCC2 option 1: write 0b1010 to bits 24:27 + * at address IMMRBAR+0x14AC + */ + clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); + } else if (SVR_REV(svid) == 0x0020) { + /* + * UCC1: write 0b11 to bits 18:19 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x00003000); + + /* + * UCC2 option 1: write 0b11 to bits 4:5 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x0c000000); + + /* + * UCC2 option 2: write 0b11 to bits 16:17 + * at address IMMRBAR+0x14AC + */ + setbits32((base + 0xac), 0x0000c000); + } + iounmap(base); + of_node_put(np_par); +} + /* ************************************************************************ * * Setup the architecture @@ -72,84 +148,13 @@ static void __init mpc83xx_km_setup_arch(void) for_each_node_by_name(np, "ucc") par_io_of_config(np); - } - - np = of_find_compatible_node(NULL, "network", "ucc_geth"); - if (np != NULL) { - /* - * handle mpc8360E Erratum QE_ENET10: - * RGMII AC values do not meet the specification - */ - uint svid = mfspr(SPRN_SVR); - struct device_node *np_par; - struct resource res; - void __iomem *base; - int ret; - - np_par = of_find_node_by_name(NULL, "par_io"); - if (np_par == NULL) { - printk(KERN_WARNING "%s couldn;t find par_io node\n", - __func__); - return; - } - /* Map Parallel I/O ports registers */ - ret = of_address_to_resource(np_par, 0, &res); - if (ret) { - printk(KERN_WARNING "%s couldn;t map par_io registers\n", - __func__); - return; - } - - base = ioremap(res.start, res.end - res.start + 1); - - /* - * set output delay adjustments to default values according - * table 5 in Errata Rev. 5, 9/2011: - * - * write 0b01 to UCC1 bits 18:19 - * write 0b01 to UCC2 option 1 bits 4:5 - * write 0b01 to UCC2 option 2 bits 16:17 - */ - clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); - /* - * set output delay adjustments to default values according - * table 3-13 in Reference Manual Rev.3 05/2010: - * - * write 0b01 to UCC2 option 2 bits 16:17 - * write 0b0101 to UCC1 bits 20:23 - * write 0b0101 to UCC2 option 1 bits 24:27 - */ - clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); - - if (SVR_REV(svid) == 0x0021) { - /* - * UCC2 option 1: write 0b1010 to bits 24:27 - * at address IMMRBAR+0x14AC - */ - clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); - } else if (SVR_REV(svid) == 0x0020) { - /* - * UCC1: write 0b11 to bits 18:19 - * at address IMMRBAR+0x14A8 - */ - setbits32((base + 0xa8), 0x00003000); - - /* - * UCC2 option 1: write 0b11 to bits 4:5 - * at address IMMRBAR+0x14A8 - */ - setbits32((base + 0xa8), 0x0c000000); - - /* - * UCC2 option 2: write 0b11 to bits 16:17 - * at address IMMRBAR+0x14AC - */ - setbits32((base + 0xac), 0x0000c000); + /* Only apply this quirk when par_io is available */ + np = of_find_compatible_node(NULL, "network", "ucc_geth"); + if (np != NULL) { + quirk_mpc8360e_qe_enet10(); + of_node_put(np); } - iounmap(base); - of_node_put(np_par); - of_node_put(np); } #endif /* CONFIG_QUICC_ENGINE */ } diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 92ab60a..a0dcd57 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -191,6 +191,13 @@ config SBC8548 help This option enables support for the Wind River SBC8548 board +config PPA8548 + bool "Prodrive PPA8548" + help + This option enables support for the Prodrive PPA8548 board. + select DEFAULT_UIMAGE + select HAS_RAPIDIO + config GE_IMP3A bool "GE Intelligent Platforms IMP3A" select DEFAULT_UIMAGE @@ -245,6 +252,14 @@ config P4080_DS help This option enables support for the P4080 DS board +config SGY_CTS1000 + tristate "Servergy CTS-1000 support" + select GPIOLIB + select OF_GPIO + depends on P4080_DS + help + Enable this to support functionality in Servergy's CTS-1000 systems. + endif # PPC32 config P5020_DS diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 76f679c..07d0dbb 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -25,8 +25,10 @@ obj-$(CONFIG_P5040_DS) += p5040_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8548) += sbc8548.o +obj-$(CONFIG_PPA8548) += ppa8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o +obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index bd12588..a7b3621 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -206,9 +206,7 @@ static void __init mpc85xx_mds_reset_ucc_phys(void) setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - for (np = NULL; (np = of_find_compatible_node(np, - "network", - "ucc_geth")) != NULL;) { + for_each_compatible_node(np, "network", "ucc_geth") { const unsigned int *prop; int ucc_num; diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index e346edf..e611e79 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -106,42 +106,6 @@ (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) -/** - * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth - * - * The Area Descriptor is a 32-bit value that determine which bits in each - * pixel are to be used for each color. - */ -static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port, - unsigned int bits_per_pixel) -{ - switch (bits_per_pixel) { - case 32: - /* 0x88883316 */ - return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); - case 24: - /* 0x88082219 */ - return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); - case 16: - /* 0x65053118 */ - return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); - default: - pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); - return 0; - } -} - -/** - * p1022ds_set_gamma_table: update the gamma table, if necessary - * - * On some boards, the gamma table for some ports may need to be modified. - * This is not the case on the P1022DS, so we do nothing. -*/ -static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, - char *gamma_table_base) -{ -} - struct fsl_law { u32 lawbar; u32 reserved1; @@ -302,7 +266,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) goto exit; } cs1_addr = lbc_br_to_phys(ecm, num_laws, br1); - if (!cs0_addr) { + if (!cs1_addr) { pr_err("p1022ds: could not determine physical address for CS1" " (BR1=%08x)\n", br1); goto exit; @@ -510,8 +474,6 @@ static void __init p1022_ds_setup_arch(void) ppc_md.progress("p1022_ds_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.get_pixel_format = p1022ds_get_pixel_format; - diu_ops.set_gamma_table = p1022ds_set_gamma_table; diu_ops.set_monitor_port = p1022ds_set_monitor_port; diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; diu_ops.valid_monitor_port = p1022ds_valid_monitor_port; diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c index 55ffa1c..8c92971 100644 --- a/arch/powerpc/platforms/85xx/p1022_rdk.c +++ b/arch/powerpc/platforms/85xx/p1022_rdk.c @@ -35,17 +35,6 @@ #define CLKDVDR_PXCLK_MASK 0x00FF0000 /** - * p1022rdk_set_monitor_port: switch the output to a different monitor port - */ -static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port) -{ - if (port != FSL_DIU_PORT_DVI) { - pr_err("p1022rdk: unsupported monitor port %i\n", port); - return; - } -} - -/** * p1022rdk_set_pixel_clock: program the DIU's clock * * @pixclock: the wavelength, in picoseconds, of the clock @@ -124,7 +113,6 @@ static void __init p1022_rdk_setup_arch(void) ppc_md.progress("p1022_rdk_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.set_monitor_port = p1022rdk_set_monitor_port; diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock; diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port; #endif diff --git a/arch/powerpc/platforms/85xx/ppa8548.c b/arch/powerpc/platforms/85xx/ppa8548.c new file mode 100644 index 0000000..6a7704b --- /dev/null +++ b/arch/powerpc/platforms/85xx/ppa8548.c @@ -0,0 +1,98 @@ +/* + * ppa8548 setup and early boot code. + * + * Copyright 2009 Prodrive B.V.. + * + * By Stef van Os (see MAINTAINERS for contact information) + * + * Based on the SBC8548 support - Copyright 2007 Wind River Systems Inc. + * Based on the MPC8548CDS support - Copyright 2005 Freescale Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/reboot.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> + +static void __init ppa8548_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init ppa8548_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ppa8548_setup_arch()", 0); +} + +static void ppa8548_show_cpuinfo(struct seq_file *m) +{ + uint32_t svid, phid1; + + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Prodrive B.V.\n"); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .type = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + { .compatible = "fsl,srio", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ppa8548, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ppa8548_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ppa8548"); +} + +define_machine(ppa8548) { + .name = "ppa8548", + .probe = ppa8548_probe, + .setup_arch = ppa8548_setup_arch, + .init_IRQ = ppa8548_pic_init, + .show_cpuinfo = ppa8548_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c index f6ea561..5cefc5a 100644 --- a/arch/powerpc/platforms/85xx/qemu_e500.c +++ b/arch/powerpc/platforms/85xx/qemu_e500.c @@ -29,9 +29,10 @@ void __init qemu_e500_pic_init(void) { struct mpic *mpic; + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU | + MPIC_ENABLE_COREINT; - mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, - 0, 256, " OpenPIC "); + mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -66,7 +67,7 @@ define_machine(qemu_e500) { #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif - .get_irq = mpic_get_irq, + .get_irq = mpic_get_coreint_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c new file mode 100644 index 0000000..611e92f --- /dev/null +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -0,0 +1,176 @@ +/* + * Servergy CTS-1000 Setup + * + * Maintained by Ben Collins <ben.c@servergy.com> + * + * Copyright 2012 by Servergy, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/of_gpio.h> +#include <linux/workqueue.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> + +#include <asm/machdep.h> + +static struct device_node *halt_node; + +static struct of_device_id child_match[] = { + { + .compatible = "sgy,gpio-halt", + }, + {}, +}; + +static void gpio_halt_wfn(struct work_struct *work) +{ + /* Likely wont return */ + orderly_poweroff(true); +} +static DECLARE_WORK(gpio_halt_wq, gpio_halt_wfn); + +static void gpio_halt_cb(void) +{ + enum of_gpio_flags flags; + int trigger, gpio; + + if (!halt_node) + return; + + gpio = of_get_gpio_flags(halt_node, 0, &flags); + + if (!gpio_is_valid(gpio)) + return; + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + printk(KERN_INFO "gpio-halt: triggering GPIO.\n"); + + /* Probably wont return */ + gpio_set_value(gpio, trigger); +} + +/* This IRQ means someone pressed the power button and it is waiting for us + * to handle the shutdown/poweroff. */ +static irqreturn_t gpio_halt_irq(int irq, void *__data) +{ + printk(KERN_INFO "gpio-halt: shutdown due to power button IRQ.\n"); + schedule_work(&gpio_halt_wq); + + return IRQ_HANDLED; +}; + +static int __devinit gpio_halt_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + struct device_node *node = pdev->dev.of_node; + int gpio, err, irq; + int trigger; + + if (!node) + return -ENODEV; + + /* If there's no matching child, this isn't really an error */ + halt_node = of_find_matching_node(node, child_match); + if (!halt_node) + return 0; + + /* Technically we could just read the first one, but punish + * DT writers for invalid form. */ + if (of_gpio_count(halt_node) != 1) + return -EINVAL; + + /* Get the gpio number relative to the dynamic base. */ + gpio = of_get_gpio_flags(halt_node, 0, &flags); + if (!gpio_is_valid(gpio)) + return -EINVAL; + + err = gpio_request(gpio, "gpio-halt"); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting GPIO %d.\n", + gpio); + halt_node = NULL; + return err; + } + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + gpio_direction_output(gpio, !trigger); + + /* Now get the IRQ which tells us when the power button is hit */ + irq = irq_of_parse_and_map(halt_node, 0); + err = request_irq(irq, gpio_halt_irq, IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "gpio-halt", halt_node); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting IRQ %d for " + "GPIO %d.\n", irq, gpio); + gpio_free(gpio); + halt_node = NULL; + return err; + } + + /* Register our halt function */ + ppc_md.halt = gpio_halt_cb; + ppc_md.power_off = gpio_halt_cb; + + printk(KERN_INFO "gpio-halt: registered GPIO %d (%d trigger, %d" + " irq).\n", gpio, trigger, irq); + + return 0; +} + +static int __devexit gpio_halt_remove(struct platform_device *pdev) +{ + if (halt_node) { + int gpio = of_get_gpio(halt_node, 0); + int irq = irq_of_parse_and_map(halt_node, 0); + + free_irq(irq, halt_node); + + ppc_md.halt = NULL; + ppc_md.power_off = NULL; + + gpio_free(gpio); + + halt_node = NULL; + } + + return 0; +} + +static struct of_device_id gpio_halt_match[] = { + /* We match on the gpio bus itself and scan the children since they + * wont be matched against us. We know the bus wont match until it + * has been registered too. */ + { + .compatible = "fsl,qoriq-gpio", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gpio_halt_match); + +static struct platform_driver gpio_halt_driver = { + .driver = { + .name = "gpio-halt", + .owner = THIS_MODULE, + .of_match_table = gpio_halt_match, + }, + .probe = gpio_halt_probe, + .remove = __devexit_p(gpio_halt_remove), +}; + +module_platform_driver(gpio_halt_driver); + +MODULE_DESCRIPTION("Driver to support GPIO triggered system halt for Servergy CTS-1000 Systems."); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Ben Collins <ben.c@servergy.com>"); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 48a920d..52de8bc 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -352,8 +352,6 @@ config OF_RTC Uses information from the OF or flattened device tree to instantiate platform devices for direct mapped RTC chips like the DS1742 or DS1743. -source "arch/powerpc/sysdev/bestcomm/Kconfig" - config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" depends on PPC diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 72afd28..cea2f09 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -76,6 +76,7 @@ config PPC_BOOK3E_64 bool "Embedded processors" select PPC_FPU # Make it a choice ? select PPC_SMP_MUXED_IPI + select PPC_DOORBELL endchoice @@ -208,6 +209,7 @@ config PPC_FSL_BOOK3E select FSL_EMB_PERFMON select PPC_SMP_MUXED_IPI select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64 + select PPC_DOORBELL default y if FSL_BOOKE config PTE_64BIT @@ -382,4 +384,8 @@ config NOT_COHERENT_CACHE config CHECK_CACHE_COHERENCY bool +config PPC_DOORBELL + bool + default n + endmenu diff --git a/arch/powerpc/platforms/cell/celleb_scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c index 3a16c5b..9c339ec 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_sio.c +++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c @@ -42,14 +42,13 @@ static struct { static int __init txx9_serial_init(void) { extern int early_serial_txx9_setup(struct uart_port *port); - struct device_node *node = NULL; + struct device_node *node; int i; struct uart_port req; struct of_irq irq; struct resource res; - while ((node = of_find_compatible_node(node, - "serial", "toshiba,sio-scc")) != NULL) { + for_each_compatible_node(node, "serial", "toshiba,sio-scc") { for (i = 0; i < ARRAY_SIZE(txx9_scc_tab); i++) { if (!(txx9_serial_bitmap & (1<<i))) continue; diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index 75d6133..b0ec78e 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -60,13 +60,12 @@ long spu_sys_callback(struct spu_syscall_block *s) syscall = spu_syscall_table[s->nr_ret]; -#ifdef DEBUG - print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall); - printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n", - s->nr_ret, - s->parm[0], s->parm[1], s->parm[2], - s->parm[3], s->parm[4], s->parm[5]); -#endif + pr_debug("SPU-syscall " + "%pSR:syscall%lld(%llx, %llx, %llx, %llx, %llx, %llx)\n", + syscall, + s->nr_ret, + s->parm[0], s->parm[1], s->parm[2], + s->parm[3], s->parm[4], s->parm[5]); return syscall(s->parm[0], s->parm[1], s->parm[2], s->parm[3], s->parm[4], s->parm[5]); diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index d00d7b0..6cc5820 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -27,6 +27,7 @@ #include <asm/lv1call.h> #include <asm/ps3fb.h> +#define PS3_VERBOSE_RESULT #include "platform.h" /** @@ -75,8 +76,9 @@ static long ps3_hpte_insert(unsigned long hpte_group, unsigned long vpn, if (result) { /* all entries bolted !*/ - pr_info("%s:result=%d vpn=%lx pa=%lx ix=%lx v=%llx r=%llx\n", - __func__, result, vpn, pa, hpte_group, hpte_v, hpte_r); + pr_info("%s:result=%s vpn=%lx pa=%lx ix=%lx v=%llx r=%llx\n", + __func__, ps3_result(result), vpn, pa, hpte_group, + hpte_v, hpte_r); BUG(); } @@ -125,8 +127,8 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp, &hpte_rs); if (result) { - pr_info("%s: res=%d read vpn=%lx slot=%lx psize=%d\n", - __func__, result, vpn, slot, psize); + pr_info("%s: result=%s read vpn=%lx slot=%lx psize=%d\n", + __func__, ps3_result(result), vpn, slot, psize); BUG(); } @@ -170,8 +172,8 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long vpn, result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0); if (result) { - pr_info("%s: res=%d vpn=%lx slot=%lx psize=%d\n", - __func__, result, vpn, slot, psize); + pr_info("%s: result=%s vpn=%lx slot=%lx psize=%d\n", + __func__, ps3_result(result), vpn, slot, psize); BUG(); } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 837cf49..9a0941b 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -17,6 +17,7 @@ config PPC_PSERIES select PPC_NATIVE select PPC_PCI_CHOICE if EXPERT select ZLIB_DEFLATE + select PPC_DOORBELL default y config PPC_SPLPAR diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 890622b..53866e5 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,4 +1,4 @@ -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) ccflags-$(CONFIG_PPC_PSERIES_DEBUG) += -DDEBUG obj-y := lpar.o hvCall.o nvram.o reconfig.o \ diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9a04322..6b73d6c 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -788,7 +788,6 @@ static void eeh_add_device_late(struct pci_dev *dev) dev->dev.archdata.edev = edev; eeh_addr_cache_insert_dev(dev); - eeh_sysfs_add_device(dev); } /** @@ -815,6 +814,29 @@ void eeh_add_device_tree_late(struct pci_bus *bus) EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); /** + * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus + * @bus: PCI bus + * + * This routine must be used to add EEH sysfs files for PCI + * devices which are attached to the indicated PCI bus. The PCI bus + * is added after system boot through hotplug or dlpar. + */ +void eeh_add_sysfs_files(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + eeh_sysfs_add_device(dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + struct pci_bus *subbus = dev->subordinate; + if (subbus) + eeh_add_sysfs_files(subbus); + } + } +} +EXPORT_SYMBOL_GPL(eeh_add_sysfs_files); + +/** * eeh_remove_device - Undo EEH setup for the indicated pci device * @dev: pci device to be removed * @purge_pe: remove the PE or not diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 7b56118..aa3693f 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -33,6 +33,11 @@ typedef struct { char * name; } firmware_feature_t; +/* + * The names in this table match names in rtas/ibm,hypertas-functions. If the + * entry ends in a '*', only upto the '*' is matched. Otherwise the entire + * string must match. + */ static __initdata firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { {FW_FEATURE_PFT, "hcall-pft"}, @@ -57,6 +62,7 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = { {FW_FEATURE_SPLPAR, "hcall-splpar"}, {FW_FEATURE_VPHN, "hcall-vphn"}, {FW_FEATURE_SET_MODE, "hcall-set-mode"}, + {FW_FEATURE_BEST_ENERGY, "hcall-best-energy-1*"}, }; /* Build up the firmware features bitmask using the contents of @@ -72,9 +78,20 @@ void __init fw_feature_init(const char *hypertas, unsigned long len) for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { + const char *name = firmware_features_table[i].name; + size_t size; /* check value against table of strings */ - if (!firmware_features_table[i].name || - strcmp(firmware_features_table[i].name, s)) + if (!name) + continue; + /* + * If there is a '*' at the end of name, only check + * upto there + */ + size = strlen(name); + if (size && name[size - 1] == '*') { + if (strncmp(name, s, size - 1)) + continue; + } else if (strcmp(name, s)) continue; /* we have a match */ diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index a389562..217ca5c 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -127,9 +127,16 @@ static void pseries_mach_cpu_die(void) get_lppaca()->donate_dedicated_cpu = 1; while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + while (!prep_irq_for_idle()) { + local_irq_enable(); + local_irq_disable(); + } + extended_cede_processor(cede_latency_hint); } + local_irq_disable(); + if (!get_lppaca()->shared_proc) get_lppaca()->donate_dedicated_cpu = 0; get_lppaca()->idle = 0; @@ -137,6 +144,7 @@ static void pseries_mach_cpu_die(void) if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { unregister_slb_shadow(hwcpu); + hard_irq_disable(); /* * Call to start_secondary_resume() will not return. * Kernel stack will be reset and start_secondary() diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index e2685ba..1b2a174 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -382,6 +382,7 @@ static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn, rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn), dma_offset, 0, limit); + next += limit * tce_size; num_tce -= limit; } while (num_tce > 0 && !rc); @@ -786,33 +787,68 @@ static u64 find_existing_ddw(struct device_node *pdn) return dma_addr; } +static void __restore_default_window(struct eeh_dev *edev, + u32 ddw_restore_token) +{ + u32 cfg_addr; + u64 buid; + int ret; + + /* + * Get the config address and phb buid of the PE window. + * Rely on eeh to retrieve this for us. + * Retrieve them from the pci device, not the node with the + * dma-window property + */ + cfg_addr = edev->config_addr; + if (edev->pe_config_addr) + cfg_addr = edev->pe_config_addr; + buid = edev->phb->buid; + + do { + ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, + BUID_HI(buid), BUID_LO(buid)); + } while (rtas_busy_delay(ret)); + pr_info("ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", + ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); +} + static int find_existing_ddw_windows(void) { - int len; struct device_node *pdn; - struct direct_window *window; const struct dynamic_dma_window_prop *direct64; + const u32 *ddw_extensions; if (!firmware_has_feature(FW_FEATURE_LPAR)) return 0; for_each_node_with_property(pdn, DIRECT64_PROPNAME) { - direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len); + direct64 = of_get_property(pdn, DIRECT64_PROPNAME, NULL); if (!direct64) continue; - window = kzalloc(sizeof(*window), GFP_KERNEL); - if (!window || len < sizeof(struct dynamic_dma_window_prop)) { - kfree(window); - remove_ddw(pdn); - continue; - } + /* + * We need to ensure the IOMMU table is active when we + * return from the IOMMU setup so that the common code + * can clear the table or find the holes. To that end, + * first, remove any existing DDW configuration. + */ + remove_ddw(pdn); - window->device = pdn; - window->prop = direct64; - spin_lock(&direct_window_list_lock); - list_add(&window->list, &direct_window_list); - spin_unlock(&direct_window_list_lock); + /* + * Second, if we are running on a new enough level of + * firmware where the restore API is present, use it to + * restore the 32-bit window, which was removed in + * create_ddw. + * If the API is not present, then create_ddw couldn't + * have removed the 32-bit window in the first place, so + * removing the DDW configuration should be sufficient. + */ + ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", + NULL); + if (ddw_extensions && ddw_extensions[0] > 0) + __restore_default_window(of_node_to_eeh_dev(pdn), + ddw_extensions[1]); } return 0; @@ -883,32 +919,9 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, } static void restore_default_window(struct pci_dev *dev, - u32 ddw_restore_token, unsigned long liobn) + u32 ddw_restore_token) { - struct eeh_dev *edev; - u32 cfg_addr; - u64 buid; - int ret; - - /* - * Get the config address and phb buid of the PE window. - * Rely on eeh to retrieve this for us. - * Retrieve them from the pci device, not the node with the - * dma-window property - */ - edev = pci_dev_to_eeh_dev(dev); - cfg_addr = edev->config_addr; - if (edev->pe_config_addr) - cfg_addr = edev->pe_config_addr; - buid = edev->phb->buid; - - do { - ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, - BUID_HI(buid), BUID_LO(buid)); - } while (rtas_busy_delay(ret)); - dev_info(&dev->dev, - "ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", - ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); + __restore_default_window(pci_dev_to_eeh_dev(dev), ddw_restore_token); } /* @@ -1099,7 +1112,7 @@ out_free_prop: out_restore_window: if (ddw_restore_token) - restore_default_window(dev, ddw_restore_token, liobn); + restore_default_window(dev, ddw_restore_token); out_unlock: mutex_unlock(&direct_window_init_mutex); @@ -1295,6 +1308,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti switch (action) { case OF_RECONFIG_DETACH_NODE: + remove_ddw(np); if (pci && pci->iommu_table) iommu_free_table(pci->iommu_table, np->full_name); @@ -1307,16 +1321,6 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti } } spin_unlock(&direct_window_list_lock); - - /* - * Because the notifier runs after isolation of the - * slot, we are guaranteed any DMA window has already - * been revoked and the TCEs have been marked invalid, - * so we don't need a call to remove_ddw(np). However, - * if an additional notifier action is added before the - * isolate call, we should update this code for - * completeness with such a call. - */ break; default: err = NOTIFY_DONE; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 56b864d..0b580f4 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -40,7 +40,8 @@ void pcibios_name_device(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); if (dn) { - const char *loc_code = of_get_property(dn, "ibm,loc-code", 0); + const char *loc_code = of_get_property(dn, "ibm,loc-code", + NULL); if (loc_code) { int loc_len = strlen(loc_code); if (loc_len < sizeof(dev->dev.name)) { diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index e6cc34a..f368668 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -2,6 +2,7 @@ #define _PSERIES_PLPAR_WRAPPERS_H #include <linux/string.h> +#include <linux/irqflags.h> #include <asm/hvcall.h> #include <asm/paca.h> @@ -41,7 +42,14 @@ static inline long extended_cede_processor(unsigned long latency_hint) u8 old_latency_hint = get_cede_latency_hint(); set_cede_latency_hint(latency_hint); + rc = cede_processor(); +#ifdef CONFIG_TRACE_IRQFLAGS + /* Ensure that H_CEDE returns with IRQs on */ + if (WARN_ON(!(mfmsr() & MSR_EE))) + __hard_irq_enable(); +#endif + set_cede_latency_hint(old_latency_hint); return rc; @@ -304,4 +312,14 @@ static inline long disable_reloc_on_exceptions(void) { return plpar_set_mode(0, 3, 0, 0); } +static inline long plapr_set_ciabr(unsigned long ciabr) +{ + return plpar_set_mode(0, 1, ciabr, 0); +} + +static inline long plapr_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0) +{ + return plpar_set_mode(0, 2, dawr0, dawrx0); +} + #endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c index af281dc..a91e6da 100644 --- a/arch/powerpc/platforms/pseries/pseries_energy.c +++ b/arch/powerpc/platforms/pseries/pseries_energy.c @@ -21,6 +21,7 @@ #include <asm/cputhreads.h> #include <asm/page.h> #include <asm/hvcall.h> +#include <asm/firmware.h> #define MODULE_VERS "1.0" @@ -32,40 +33,6 @@ static int sysfs_entries; /* Helper routines */ -/* - * Routine to detect firmware support for hcall - * return 1 if H_BEST_ENERGY is supported - * else return 0 - */ - -static int check_for_h_best_energy(void) -{ - struct device_node *rtas = NULL; - const char *hypertas, *s; - int length; - int rc = 0; - - rtas = of_find_node_by_path("/rtas"); - if (!rtas) - return 0; - - hypertas = of_get_property(rtas, "ibm,hypertas-functions", &length); - if (!hypertas) { - of_node_put(rtas); - return 0; - } - - /* hypertas will have list of strings with hcall names */ - for (s = hypertas; s < hypertas + length; s += strlen(s) + 1) { - if (!strncmp("hcall-best-energy-1", s, 19)) { - rc = 1; /* Found the string */ - break; - } - } - of_node_put(rtas); - return rc; -} - /* Helper Routines to convert between drc_index to cpu numbers */ static u32 cpu_to_drc_index(int cpu) @@ -262,7 +229,7 @@ static int __init pseries_energy_init(void) int cpu, err; struct device *cpu_dev; - if (!check_for_h_best_energy()) { + if (!firmware_has_feature(FW_FEATURE_BEST_ENERGY)) { printk(KERN_INFO "Hypercall H_BEST_ENERGY not supported\n"); return 0; } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 527e12c..8bcc9ca 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,6 +65,7 @@ #include <asm/smp.h> #include <asm/firmware.h> #include <asm/eeh.h> +#include <asm/reg.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -375,7 +376,7 @@ static void pSeries_idle(void) * to ever be a problem in practice we can move this into a kernel thread to * finish off the process later in boot. */ -static int __init pSeries_enable_reloc_on_exc(void) +long pSeries_enable_reloc_on_exc(void) { long rc; unsigned int delay, total_delay = 0; @@ -397,9 +398,9 @@ static int __init pSeries_enable_reloc_on_exc(void) mdelay(delay); } } +EXPORT_SYMBOL(pSeries_enable_reloc_on_exc); -#ifdef CONFIG_KEXEC -static long pSeries_disable_reloc_on_exc(void) +long pSeries_disable_reloc_on_exc(void) { long rc; @@ -410,7 +411,9 @@ static long pSeries_disable_reloc_on_exc(void) mdelay(get_longbusy_msecs(rc)); } } +EXPORT_SYMBOL(pSeries_disable_reloc_on_exc); +#ifdef CONFIG_KEXEC static void pSeries_machine_kexec(struct kimage *image) { long rc; @@ -498,6 +501,14 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx) return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx); } +static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx) +{ + /* PAPR says we can't set HYP */ + dawrx &= ~DAWRX_HYP; + + return plapr_set_watchpoint0(dawr, dawrx); +} + #define CMO_CHARACTERISTICS_TOKEN 44 #define CMO_MAXLENGTH 1026 @@ -604,6 +615,9 @@ static void __init pSeries_init_early(void) else if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; + if (firmware_has_feature(FW_FEATURE_SET_MODE)) + ppc_md.set_dawr = pseries_set_dawr; + pSeries_cmo_feature_init(); iommu_init_early_pSeries(); diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 80cd0be..12bc8c3 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -42,6 +42,7 @@ #include <asm/vdso_datapage.h> #include <asm/cputhreads.h> #include <asm/xics.h> +#include <asm/dbell.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -54,6 +55,11 @@ */ static cpumask_var_t of_spin_mask; +/* + * If we multiplex IPI mechanisms, store the appropriate XICS IPI mechanism here + */ +static void (*xics_cause_ipi)(int cpu, unsigned long data); + /* Query where a cpu is now. Return codes #defined in plpar_wrappers.h */ int smp_query_cpu_stopped(unsigned int pcpu) { @@ -137,6 +143,8 @@ static void smp_xics_setup_cpu(int cpu) { if (cpu != boot_cpuid) xics_setup_cpu(); + if (cpu_has_feature(CPU_FTR_DBELL)) + doorbell_setup_this_cpu(); if (firmware_has_feature(FW_FEATURE_SPLPAR)) vpa_init(cpu); @@ -195,6 +203,27 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) return 1; } +/* Only used on systems that support multiple IPI mechanisms */ +static void pSeries_cause_ipi_mux(int cpu, unsigned long data) +{ + if (cpumask_test_cpu(cpu, cpu_sibling_mask(smp_processor_id()))) + doorbell_cause_ipi(cpu, data); + else + xics_cause_ipi(cpu, data); +} + +static __init int pSeries_smp_probe(void) +{ + int ret = xics_smp_probe(); + + if (cpu_has_feature(CPU_FTR_DBELL)) { + xics_cause_ipi = smp_ops->cause_ipi; + smp_ops->cause_ipi = pSeries_cause_ipi_mux; + } + + return ret; +} + static struct smp_ops_t pSeries_mpic_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, @@ -204,8 +233,8 @@ static struct smp_ops_t pSeries_mpic_smp_ops = { static struct smp_ops_t pSeries_xics_smp_ops = { .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ - .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */ - .probe = xics_smp_probe, + .cause_ipi = NULL, /* Filled at runtime by pSeries_smp_probe() */ + .probe = pSeries_smp_probe, .kick_cpu = smp_pSeries_kick_cpu, .setup_cpu = smp_xics_setup_cpu, .cpu_bootable = smp_pSeries_cpu_bootable, diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile index 56817ac..162fc60 100644 --- a/arch/powerpc/platforms/wsp/Makefile +++ b/arch/powerpc/platforms/wsp/Makefile @@ -1,4 +1,4 @@ -ccflags-y += -mno-minimal-toc +ccflags-y += $(NO_MINIMAL_TOC) obj-y += setup.o ics.o wsp.o obj-$(CONFIG_PPC_PSR2) += psr2.o diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index a57600b..b0a518e 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -1,6 +1,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) @@ -26,7 +26,6 @@ obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ -obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ mv64x60-$(CONFIG_PCI) += mv64x60_pci.o obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \ mv64x60_udbg.o @@ -37,6 +36,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_IPIC) += ipic.o obj-$(CONFIG_4xx) += uic.o +obj-$(CONFIG_PPC4xx_OCM) += ppc4xx_ocm.o obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c index 8cf93f0..afc2dbf 100644 --- a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c +++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c @@ -203,6 +203,7 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = { { .compatible = "fsl,p1024-l2-cache-controller",}, { .compatible = "fsl,p1015-l2-cache-controller",}, { .compatible = "fsl,p1010-l2-cache-controller",}, + { .compatible = "fsl,bsc9131-l2-cache-controller",}, {}, }; diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c index 2a36fd6..d7fc722 100644 --- a/arch/powerpc/sysdev/fsl_ifc.c +++ b/arch/powerpc/sysdev/fsl_ifc.c @@ -63,7 +63,7 @@ int fsl_ifc_find(phys_addr_t addr_base) return -ENODEV; for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) { - __be32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr); + u32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr); if (cspr & CSPR_V && (cspr & CSPR_BA) == convert_ifc_address(addr_base)) return i; diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 300be2d..6bc5a54 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -74,8 +74,8 @@ int fsl_lbc_find(phys_addr_t addr_base) lbc = fsl_lbc_ctrl_dev->regs; for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) { - __be32 br = in_be32(&lbc->bank[i].br); - __be32 or = in_be32(&lbc->bank[i].or); + u32 br = in_be32(&lbc->bank[i].br); + u32 or = in_be32(&lbc->bank[i].or); if (br & BR_V && (br & or & BR_BA) == fsl_lbc_addr(addr_base)) return i; @@ -97,7 +97,7 @@ EXPORT_SYMBOL(fsl_lbc_find); int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm) { int bank; - __be32 br; + u32 br; struct fsl_lbc_regs __iomem *lbc; bank = fsl_lbc_find(addr_base); diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 6e53d97..178c994 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -28,7 +28,7 @@ #include "fsl_msi.h" #include "fsl_pci.h" -LIST_HEAD(msi_head); +static LIST_HEAD(msi_head); struct fsl_msi_feature { u32 fsl_pic_ip; @@ -130,7 +130,7 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, struct pci_controller *hose = pci_bus_to_host(pdev->bus); u64 address; /* Physical address of the MSIIR */ int len; - const u64 *reg; + const __be64 *reg; /* If the msi-address-64 property exists, then use it */ reg = of_get_property(hose->dn, "msi-address-64", &len); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 92a5915..682084d 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -421,13 +421,16 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus) } } -int __init fsl_add_bridge(struct device_node *dev, int is_primary) +int __init fsl_add_bridge(struct platform_device *pdev, int is_primary) { int len; struct pci_controller *hose; struct resource rsrc; const int *bus_range; u8 hdr_type, progif; + struct device_node *dev; + + dev = pdev->dev.of_node; if (!of_device_is_available(dev)) { pr_warning("%s: disabled\n", dev->full_name); @@ -453,6 +456,8 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) if (!hose) return -ENOMEM; + /* set platform device as the parent */ + hose->parent = &pdev->dev; hose->first_busno = bus_range ? bus_range[0] : 0x0; hose->last_busno = bus_range ? bus_range[1] : 0xff; @@ -827,13 +832,18 @@ static const struct of_device_id pci_ids[] = { { .compatible = "fsl,mpc8548-pcie", }, { .compatible = "fsl,mpc8610-pci", }, { .compatible = "fsl,mpc8641-pcie", }, + { .compatible = "fsl,qoriq-pcie-v2.1", }, + { .compatible = "fsl,qoriq-pcie-v2.2", }, + { .compatible = "fsl,qoriq-pcie-v2.3", }, + { .compatible = "fsl,qoriq-pcie-v2.4", }, + + /* + * The following entries are for compatibility with older device + * trees. + */ { .compatible = "fsl,p1022-pcie", }, - { .compatible = "fsl,p1010-pcie", }, - { .compatible = "fsl,p1023-pcie", }, { .compatible = "fsl,p4080-pcie", }, - { .compatible = "fsl,qoriq-pcie-v2.4", }, - { .compatible = "fsl,qoriq-pcie-v2.3", }, - { .compatible = "fsl,qoriq-pcie-v2.2", }, + {}, }; @@ -880,7 +890,7 @@ static int fsl_pci_probe(struct platform_device *pdev) #endif node = pdev->dev.of_node; - ret = fsl_add_bridge(node, fsl_pci_primary == node); + ret = fsl_add_bridge(pdev, fsl_pci_primary == node); #ifdef CONFIG_SWIOTLB if (ret == 0) { diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h index d078537..c495c00 100644 --- a/arch/powerpc/sysdev/fsl_pci.h +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -91,7 +91,7 @@ struct ccsr_pci { __be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */ }; -extern int fsl_add_bridge(struct device_node *dev, int is_primary); +extern int fsl_add_bridge(struct platform_device *pdev, int is_primary); extern void fsl_pcibios_fixup_bus(struct pci_bus *bus); extern int mpc83xx_add_bridge(struct device_node *dev); u64 fsl_pci_immrbar_base(struct pci_controller *hose); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 97118dc..228cf91 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -58,10 +58,10 @@ phys_addr_t get_immrbase(void) if (soc) { int size; u32 naddr; - const u32 *prop = of_get_property(soc, "#address-cells", &size); + const __be32 *prop = of_get_property(soc, "#address-cells", &size); if (prop && size == 4) - naddr = *prop; + naddr = be32_to_cpup(prop); else naddr = 2; diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c index 96f815a..5492dc5 100644 --- a/arch/powerpc/sysdev/mpc5xxx_clocks.c +++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c @@ -9,9 +9,9 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/export.h> +#include <asm/mpc5xxx.h> -unsigned int -mpc5xxx_get_bus_frequency(struct device_node *node) +unsigned long mpc5xxx_get_bus_frequency(struct device_node *node) { struct device_node *np; const unsigned int *p_bus_freq = NULL; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3b2efd4..d30e6a6 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -54,7 +54,7 @@ static DEFINE_RAW_SPINLOCK(mpic_lock); #ifdef CONFIG_PPC32 /* XXX for now */ #ifdef CONFIG_IRQ_ALL_CPUS -#define distribute_irqs (1) +#define distribute_irqs (!(mpic->flags & MPIC_SINGLE_DEST_CPU)) #else #define distribute_irqs (0) #endif @@ -1182,6 +1182,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, const char *vers; const u32 *psrc; u32 last_irq; + u32 fsl_version = 0; /* Default MPIC search parameters */ static const struct of_device_id __initconst mpic_device_id[] = { @@ -1314,7 +1315,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); if (mpic->flags & MPIC_FSL) { - u32 brr1, version; + u32 brr1; int ret; /* @@ -1327,7 +1328,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs, MPIC_FSL_BRR1); - version = brr1 & MPIC_FSL_BRR1_VER; + fsl_version = brr1 & MPIC_FSL_BRR1_VER; /* Error interrupt mask register (EIMR) is required for * handling individual device error interrupts. EIMR @@ -1342,11 +1343,30 @@ struct mpic * __init mpic_alloc(struct device_node *node, * is the number of vectors which have been consumed by * ipis and timer interrupts. */ - if (version >= 0x401) { + if (fsl_version >= 0x401) { ret = mpic_setup_error_int(mpic, intvec_top - 12); if (ret) return NULL; } + + } + + /* + * EPR is only available starting with v4.0. To support + * platforms that don't know the MPIC version at compile-time, + * such as qemu-e500, turn off coreint if this MPIC doesn't + * support it. Note that we never enable it if it wasn't + * requested in the first place. + * + * This is done outside the MPIC_FSL check, so that we + * also disable coreint if the MPIC node doesn't have + * an "fsl,mpic" compatible at all. This will be the case + * with device trees generated by older versions of QEMU. + * fsl_version will be zero if MPIC_FSL is not set. + */ + if (fsl_version < 0x400 && (flags & MPIC_ENABLE_COREINT)) { + WARN_ON(ppc_md.get_irq != mpic_get_coreint_irq); + ppc_md.get_irq = mpic_get_irq; } /* Reset */ diff --git a/arch/powerpc/sysdev/ppc4xx_ocm.c b/arch/powerpc/sysdev/ppc4xx_ocm.c new file mode 100644 index 0000000..1b15f93 --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_ocm.c @@ -0,0 +1,415 @@ +/* + * PowerPC 4xx OCM memory allocation support + * + * (C) Copyright 2009, Applied Micro Circuits Corporation + * Victor Gallardo (vgallardo@amcc.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/of.h> +#include <asm/rheap.h> +#include <asm/ppc4xx_ocm.h> +#include <linux/slab.h> +#include <linux/debugfs.h> + +#define OCM_DISABLED 0 +#define OCM_ENABLED 1 + +struct ocm_block { + struct list_head list; + void __iomem *addr; + int size; + const char *owner; +}; + +/* non-cached or cached region */ +struct ocm_region { + phys_addr_t phys; + void __iomem *virt; + + int memtotal; + int memfree; + + rh_info_t *rh; + struct list_head list; +}; + +struct ocm_info { + int index; + int status; + int ready; + + phys_addr_t phys; + + int alignment; + int memtotal; + int cache_size; + + struct ocm_region nc; /* non-cached region */ + struct ocm_region c; /* cached region */ +}; + +static struct ocm_info *ocm_nodes; +static int ocm_count; + +static struct ocm_info *ocm_get_node(unsigned int index) +{ + if (index >= ocm_count) { + printk(KERN_ERR "PPC4XX OCM: invalid index"); + return NULL; + } + + return &ocm_nodes[index]; +} + +static int ocm_free_region(struct ocm_region *ocm_reg, const void *addr) +{ + struct ocm_block *blk, *tmp; + unsigned long offset; + + if (!ocm_reg->virt) + return 0; + + list_for_each_entry_safe(blk, tmp, &ocm_reg->list, list) { + if (blk->addr == addr) { + offset = addr - ocm_reg->virt; + ocm_reg->memfree += blk->size; + rh_free(ocm_reg->rh, offset); + list_del(&blk->list); + kfree(blk); + return 1; + } + } + + return 0; +} + +static void __init ocm_init_node(int count, struct device_node *node) +{ + struct ocm_info *ocm; + + const unsigned int *cell_index; + const unsigned int *cache_size; + int len; + + struct resource rsrc; + int ioflags; + + ocm = ocm_get_node(count); + + cell_index = of_get_property(node, "cell-index", &len); + if (!cell_index) { + printk(KERN_ERR "PPC4XX OCM: missing cell-index property"); + return; + } + ocm->index = *cell_index; + + if (of_device_is_available(node)) + ocm->status = OCM_ENABLED; + + cache_size = of_get_property(node, "cached-region-size", &len); + if (cache_size) + ocm->cache_size = *cache_size; + + if (of_address_to_resource(node, 0, &rsrc)) { + printk(KERN_ERR "PPC4XX OCM%d: could not get resource address\n", + ocm->index); + return; + } + + ocm->phys = rsrc.start; + ocm->memtotal = (rsrc.end - rsrc.start + 1); + + printk(KERN_INFO "PPC4XX OCM%d: %d Bytes (%s)\n", + ocm->index, ocm->memtotal, + (ocm->status == OCM_DISABLED) ? "disabled" : "enabled"); + + if (ocm->status == OCM_DISABLED) + return; + + /* request region */ + + if (!request_mem_region(ocm->phys, ocm->memtotal, "ppc4xx_ocm")) { + printk(KERN_ERR "PPC4XX OCM%d: could not request region\n", + ocm->index); + return; + } + + /* Configure non-cached and cached regions */ + + ocm->nc.phys = ocm->phys; + ocm->nc.memtotal = ocm->memtotal - ocm->cache_size; + ocm->nc.memfree = ocm->nc.memtotal; + + ocm->c.phys = ocm->phys + ocm->nc.memtotal; + ocm->c.memtotal = ocm->cache_size; + ocm->c.memfree = ocm->c.memtotal; + + if (ocm->nc.memtotal == 0) + ocm->nc.phys = 0; + + if (ocm->c.memtotal == 0) + ocm->c.phys = 0; + + printk(KERN_INFO "PPC4XX OCM%d: %d Bytes (non-cached)\n", + ocm->index, ocm->nc.memtotal); + + printk(KERN_INFO "PPC4XX OCM%d: %d Bytes (cached)\n", + ocm->index, ocm->c.memtotal); + + /* ioremap the non-cached region */ + if (ocm->nc.memtotal) { + ioflags = _PAGE_NO_CACHE | _PAGE_GUARDED | _PAGE_EXEC; + ocm->nc.virt = __ioremap(ocm->nc.phys, ocm->nc.memtotal, + ioflags); + + if (!ocm->nc.virt) { + printk(KERN_ERR + "PPC4XX OCM%d: failed to ioremap non-cached memory\n", + ocm->index); + ocm->nc.memfree = 0; + return; + } + } + + /* ioremap the cached region */ + + if (ocm->c.memtotal) { + ioflags = _PAGE_EXEC; + ocm->c.virt = __ioremap(ocm->c.phys, ocm->c.memtotal, + ioflags); + + if (!ocm->c.virt) { + printk(KERN_ERR + "PPC4XX OCM%d: failed to ioremap cached memory\n", + ocm->index); + ocm->c.memfree = 0; + return; + } + } + + /* Create Remote Heaps */ + + ocm->alignment = 4; /* default 4 byte alignment */ + + if (ocm->nc.virt) { + ocm->nc.rh = rh_create(ocm->alignment); + rh_attach_region(ocm->nc.rh, 0, ocm->nc.memtotal); + } + + if (ocm->c.virt) { + ocm->c.rh = rh_create(ocm->alignment); + rh_attach_region(ocm->c.rh, 0, ocm->c.memtotal); + } + + INIT_LIST_HEAD(&ocm->nc.list); + INIT_LIST_HEAD(&ocm->c.list); + + ocm->ready = 1; + + return; +} + +static int ocm_debugfs_show(struct seq_file *m, void *v) +{ + struct ocm_block *blk, *tmp; + unsigned int i; + + for (i = 0; i < ocm_count; i++) { + struct ocm_info *ocm = ocm_get_node(i); + + if (!ocm || !ocm->ready) + continue; + + seq_printf(m, "PPC4XX OCM : %d\n", ocm->index); + seq_printf(m, "PhysAddr : 0x%llx\n", ocm->phys); + seq_printf(m, "MemTotal : %d Bytes\n", ocm->memtotal); + seq_printf(m, "MemTotal(NC) : %d Bytes\n", ocm->nc.memtotal); + seq_printf(m, "MemTotal(C) : %d Bytes\n", ocm->c.memtotal); + + seq_printf(m, "\n"); + + seq_printf(m, "NC.PhysAddr : 0x%llx\n", ocm->nc.phys); + seq_printf(m, "NC.VirtAddr : 0x%p\n", ocm->nc.virt); + seq_printf(m, "NC.MemTotal : %d Bytes\n", ocm->nc.memtotal); + seq_printf(m, "NC.MemFree : %d Bytes\n", ocm->nc.memfree); + + list_for_each_entry_safe(blk, tmp, &ocm->nc.list, list) { + seq_printf(m, "NC.MemUsed : %d Bytes (%s)\n", + blk->size, blk->owner); + } + + seq_printf(m, "\n"); + + seq_printf(m, "C.PhysAddr : 0x%llx\n", ocm->c.phys); + seq_printf(m, "C.VirtAddr : 0x%p\n", ocm->c.virt); + seq_printf(m, "C.MemTotal : %d Bytes\n", ocm->c.memtotal); + seq_printf(m, "C.MemFree : %d Bytes\n", ocm->c.memfree); + + list_for_each_entry_safe(blk, tmp, &ocm->c.list, list) { + seq_printf(m, "C.MemUsed : %d Bytes (%s)\n", + blk->size, blk->owner); + } + + seq_printf(m, "\n"); + } + + return 0; +} + +static int ocm_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, ocm_debugfs_show, NULL); +} + +static const struct file_operations ocm_debugfs_fops = { + .open = ocm_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ocm_debugfs_init(void) +{ + struct dentry *junk; + + junk = debugfs_create_dir("ppc4xx_ocm", 0); + if (!junk) { + printk(KERN_ALERT "debugfs ppc4xx ocm: failed to create dir\n"); + return -1; + } + + if (debugfs_create_file("info", 0644, junk, NULL, &ocm_debugfs_fops)) { + printk(KERN_ALERT "debugfs ppc4xx ocm: failed to create file\n"); + return -1; + } + + return 0; +} + +void *ppc4xx_ocm_alloc(phys_addr_t *phys, int size, int align, + int flags, const char *owner) +{ + void __iomem *addr = NULL; + unsigned long offset; + struct ocm_info *ocm; + struct ocm_region *ocm_reg; + struct ocm_block *ocm_blk; + int i; + + for (i = 0; i < ocm_count; i++) { + ocm = ocm_get_node(i); + + if (!ocm || !ocm->ready) + continue; + + if (flags == PPC4XX_OCM_NON_CACHED) + ocm_reg = &ocm->nc; + else + ocm_reg = &ocm->c; + + if (!ocm_reg->virt) + continue; + + if (align < ocm->alignment) + align = ocm->alignment; + + offset = rh_alloc_align(ocm_reg->rh, size, align, NULL); + + if (IS_ERR_VALUE(offset)) + continue; + + ocm_blk = kzalloc(sizeof(struct ocm_block *), GFP_KERNEL); + if (!ocm_blk) { + printk(KERN_ERR "PPC4XX OCM: could not allocate ocm block"); + rh_free(ocm_reg->rh, offset); + break; + } + + *phys = ocm_reg->phys + offset; + addr = ocm_reg->virt + offset; + size = ALIGN(size, align); + + ocm_blk->addr = addr; + ocm_blk->size = size; + ocm_blk->owner = owner; + list_add_tail(&ocm_blk->list, &ocm_reg->list); + + ocm_reg->memfree -= size; + + break; + } + + return addr; +} + +void ppc4xx_ocm_free(const void *addr) +{ + int i; + + if (!addr) + return; + + for (i = 0; i < ocm_count; i++) { + struct ocm_info *ocm = ocm_get_node(i); + + if (!ocm || !ocm->ready) + continue; + + if (ocm_free_region(&ocm->nc, addr) || + ocm_free_region(&ocm->c, addr)) + return; + } +} + +static int __init ppc4xx_ocm_init(void) +{ + struct device_node *np; + int count; + + count = 0; + for_each_compatible_node(np, NULL, "ibm,ocm") + count++; + + if (!count) + return 0; + + ocm_nodes = kzalloc((count * sizeof(struct ocm_info)), GFP_KERNEL); + if (!ocm_nodes) { + printk(KERN_ERR "PPC4XX OCM: failed to allocate OCM nodes!\n"); + return -ENOMEM; + } + + ocm_count = count; + count = 0; + + for_each_compatible_node(np, NULL, "ibm,ocm") { + ocm_init_node(count, np); + count++; + } + + ocm_debugfs_init(); + + return 0; +} + +arch_initcall(ppc4xx_ocm_init); diff --git a/arch/powerpc/sysdev/xics/ics-rtas.c b/arch/powerpc/sysdev/xics/ics-rtas.c index c782f85..936575d 100644 --- a/arch/powerpc/sysdev/xics/ics-rtas.c +++ b/arch/powerpc/sysdev/xics/ics-rtas.c @@ -213,7 +213,7 @@ static int ics_rtas_host_match(struct ics *ics, struct device_node *node) return !of_device_is_compatible(node, "chrp,iic"); } -int ics_rtas_init(void) +__init int ics_rtas_init(void) { ibm_get_xive = rtas_token("ibm,get-xive"); ibm_set_xive = rtas_token("ibm,set-xive"); diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index b49fdbd..1278788 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -4,7 +4,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror GCOV_PROFILE := n -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) obj-y += xmon.o nonstdio.o diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1f8d2f1..13f85de 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -43,6 +43,7 @@ #include <asm/setjmp.h> #include <asm/reg.h> #include <asm/debug.h> +#include <asm/hw_breakpoint.h> #ifdef CONFIG_PPC64 #include <asm/hvcall.h> @@ -607,7 +608,7 @@ static int xmon_sstep(struct pt_regs *regs) return 1; } -static int xmon_dabr_match(struct pt_regs *regs) +static int xmon_break_match(struct pt_regs *regs) { if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT)) return 0; @@ -740,8 +741,14 @@ static void insert_bpts(void) static void insert_cpu_bpts(void) { - if (dabr.enabled) - set_dabr(dabr.address | (dabr.enabled & 7), DABRX_ALL); + struct arch_hw_breakpoint brk; + + if (dabr.enabled) { + brk.address = dabr.address; + brk.type = (dabr.enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL; + brk.len = 8; + set_breakpoint(&brk); + } if (iabr && cpu_has_feature(CPU_FTR_IABR)) mtspr(SPRN_IABR, iabr->address | (iabr->enabled & (BP_IABR|BP_IABR_TE))); @@ -769,7 +776,7 @@ static void remove_bpts(void) static void remove_cpu_bpts(void) { - set_dabr(0, 0); + hw_breakpoint_disable(); if (cpu_has_feature(CPU_FTR_IABR)) mtspr(SPRN_IABR, 0); } @@ -1138,7 +1145,7 @@ bpt_cmds(void) printf(badaddr); break; } - dabr.address &= ~7; + dabr.address &= ~HW_BRK_TYPE_DABR; dabr.enabled = mode | BP_DABR; } break; @@ -2917,7 +2924,7 @@ static void xmon_init(int enable) __debugger_bpt = xmon_bpt; __debugger_sstep = xmon_sstep; __debugger_iabr_match = xmon_iabr_match; - __debugger_dabr_match = xmon_dabr_match; + __debugger_break_match = xmon_break_match; __debugger_fault_handler = xmon_fault_handler; } else { __debugger = NULL; @@ -2925,7 +2932,7 @@ static void xmon_init(int enable) __debugger_bpt = NULL; __debugger_sstep = NULL; __debugger_iabr_match = NULL; - __debugger_dabr_match = NULL; + __debugger_break_match = NULL; __debugger_fault_handler = NULL; } } diff --git a/crypto/Kconfig b/crypto/Kconfig index 3f37520..0880a14 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -477,6 +477,13 @@ config CRYPTO_SHA1_ARM SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using optimized ARM assembler. +config CRYPTO_SHA1_PPC + tristate "SHA1 digest algorithm (powerpc)" + depends on PPC + help + This is the powerpc hardware accelerated implementation of the + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). + config CRYPTO_SHA256 tristate "SHA224 and SHA256 digest algorithm" select CRYPTO_HASH diff --git a/drivers/Makefile b/drivers/Makefile index b359948..dce39a9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_PNP) += pnp/ obj-y += amba/ # Many drivers will want to use DMA so this has to be made available # really early. -obj-$(CONFIG_DMA_ENGINE) += dma/ +obj-$(CONFIG_DMADEVICES) += dma/ obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_XEN) += xen/ diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 652f57e..3a8fb28 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -26,9 +26,9 @@ #include <asm/prom.h> #include <asm/mpc52xx.h> -#include <sysdev/bestcomm/bestcomm.h> -#include <sysdev/bestcomm/bestcomm_priv.h> -#include <sysdev/bestcomm/ata.h> +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/bestcomm_priv.h> +#include <linux/fsl/bestcomm/ata.h> #define DRV_NAME "mpc52xx_ata" diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index d4c1218..40179e7 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -125,6 +125,8 @@ config MPC512X_DMA ---help--- Enable support for the Freescale MPC512x built-in DMA engine. +source "drivers/dma/bestcomm/Kconfig" + config MV_XOR bool "Marvell XOR engine support" depends on PLAT_ORION diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 7428fea..642d967 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioat/ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o obj-$(CONFIG_FSL_DMA) += fsldma.o obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o +obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ obj-$(CONFIG_MV_XOR) += mv_xor.o obj-$(CONFIG_DW_DMAC) += dw_dmac.o obj-$(CONFIG_AT_HDMAC) += at_hdmac.o diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/drivers/dma/bestcomm/Kconfig index 29e4270..29e4270 100644 --- a/arch/powerpc/sysdev/bestcomm/Kconfig +++ b/drivers/dma/bestcomm/Kconfig diff --git a/arch/powerpc/sysdev/bestcomm/Makefile b/drivers/dma/bestcomm/Makefile index aed2df2..aed2df2 100644 --- a/arch/powerpc/sysdev/bestcomm/Makefile +++ b/drivers/dma/bestcomm/Makefile diff --git a/arch/powerpc/sysdev/bestcomm/ata.c b/drivers/dma/bestcomm/ata.c index 901c9f9..2fd87f8 100644 --- a/arch/powerpc/sysdev/bestcomm/ata.c +++ b/drivers/dma/bestcomm/ata.c @@ -18,9 +18,9 @@ #include <linux/types.h> #include <asm/io.h> -#include "bestcomm.h" -#include "bestcomm_priv.h" -#include "ata.h" +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/bestcomm_priv.h> +#include <linux/fsl/bestcomm/ata.h> /* ======================================================================== */ diff --git a/arch/powerpc/sysdev/bestcomm/bcom_ata_task.c b/drivers/dma/bestcomm/bcom_ata_task.c index cc6049a..cc6049a 100644 --- a/arch/powerpc/sysdev/bestcomm/bcom_ata_task.c +++ b/drivers/dma/bestcomm/bcom_ata_task.c diff --git a/arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c b/drivers/dma/bestcomm/bcom_fec_rx_task.c index a1ad6a0..a1ad6a0 100644 --- a/arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c +++ b/drivers/dma/bestcomm/bcom_fec_rx_task.c diff --git a/arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c b/drivers/dma/bestcomm/bcom_fec_tx_task.c index b1c495c..b1c495c 100644 --- a/arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c +++ b/drivers/dma/bestcomm/bcom_fec_tx_task.c diff --git a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c b/drivers/dma/bestcomm/bcom_gen_bd_rx_task.c index efee022..efee022 100644 --- a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c +++ b/drivers/dma/bestcomm/bcom_gen_bd_rx_task.c diff --git a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c b/drivers/dma/bestcomm/bcom_gen_bd_tx_task.c index c605aa4..c605aa4 100644 --- a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c +++ b/drivers/dma/bestcomm/bcom_gen_bd_tx_task.c diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c index 81c3314..a8c2e29 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.c +++ b/drivers/dma/bestcomm/bestcomm.c @@ -23,9 +23,9 @@ #include <asm/irq.h> #include <asm/mpc52xx.h> -#include "sram.h" -#include "bestcomm_priv.h" -#include "bestcomm.h" +#include <linux/fsl/bestcomm/sram.h> +#include <linux/fsl/bestcomm/bestcomm_priv.h> +#include "linux/fsl/bestcomm/bestcomm.h" #define DRIVER_NAME "bestcomm-core" diff --git a/arch/powerpc/sysdev/bestcomm/fec.c b/drivers/dma/bestcomm/fec.c index 957a988..7f1fb1c 100644 --- a/arch/powerpc/sysdev/bestcomm/fec.c +++ b/drivers/dma/bestcomm/fec.c @@ -16,9 +16,9 @@ #include <linux/types.h> #include <asm/io.h> -#include "bestcomm.h" -#include "bestcomm_priv.h" -#include "fec.h" +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/bestcomm_priv.h> +#include <linux/fsl/bestcomm/fec.h> /* ======================================================================== */ diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/drivers/dma/bestcomm/gen_bd.c index e0a53e3..1a5b22d 100644 --- a/arch/powerpc/sysdev/bestcomm/gen_bd.c +++ b/drivers/dma/bestcomm/gen_bd.c @@ -21,9 +21,9 @@ #include <asm/mpc52xx.h> #include <asm/mpc52xx_psc.h> -#include "bestcomm.h" -#include "bestcomm_priv.h" -#include "gen_bd.h" +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/bestcomm_priv.h> +#include <linux/fsl/bestcomm/gen_bd.h> /* ======================================================================== */ diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/drivers/dma/bestcomm/sram.c index b6db23e..5e2ed30 100644 --- a/arch/powerpc/sysdev/bestcomm/sram.c +++ b/drivers/dma/bestcomm/sram.c @@ -23,7 +23,7 @@ #include <asm/io.h> #include <asm/mmu.h> -#include "sram.h" +#include <linux/fsl/bestcomm/sram.h> /* Struct keeping our 'state' */ diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c index 35ef6e2..3024685 100644 --- a/drivers/macintosh/windfarm_pm112.c +++ b/drivers/macintosh/windfarm_pm112.c @@ -681,7 +681,7 @@ static int __init wf_pm112_init(void) /* Count the number of CPU cores */ nr_cores = 0; - for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; ) + for_each_node_by_type(cpu, "cpu") ++nr_cores; printk(KERN_INFO "windfarm: initializing for dual-core desktop G5\n"); diff --git a/drivers/macintosh/windfarm_pm72.c b/drivers/macintosh/windfarm_pm72.c index 6e55853..2f506b9 100644 --- a/drivers/macintosh/windfarm_pm72.c +++ b/drivers/macintosh/windfarm_pm72.c @@ -804,7 +804,7 @@ static int __init wf_pm72_init(void) /* Count the number of CPU cores */ nr_chips = 0; - for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; ) + for_each_node_by_type(cpu, "cpu") ++nr_chips; if (nr_chips > NR_CHIPS) nr_chips = NR_CHIPS; diff --git a/drivers/macintosh/windfarm_rm31.c b/drivers/macintosh/windfarm_rm31.c index 844003f..0b9a79b 100644 --- a/drivers/macintosh/windfarm_rm31.c +++ b/drivers/macintosh/windfarm_rm31.c @@ -696,7 +696,7 @@ static int __init wf_rm31_init(void) /* Count the number of CPU cores */ nr_chips = 0; - for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; ) + for_each_node_by_type(cpu, "cpu") ++nr_chips; if (nr_chips > NR_CHIPS) nr_chips = NR_CHIPS; diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c index 7f91b0c..77943a6 100644 --- a/drivers/net/ethernet/freescale/fec_mpc52xx.c +++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c @@ -41,8 +41,8 @@ #include <asm/delay.h> #include <asm/mpc52xx.h> -#include <sysdev/bestcomm/bestcomm.h> -#include <sysdev/bestcomm/fec.h> +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/fec.h> #include "fec_mpc52xx.h" diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index 19cfd7a..41fbd94 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -944,7 +944,7 @@ static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel) #define PF_COMP_0_MASK 0x0000000F #define PF_COMP_0_SHIFT 0 -#define MAKE_PF(alpha, red, blue, green, size, c0, c1, c2, c3) \ +#define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \ cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \ (blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \ (red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \ @@ -954,10 +954,10 @@ static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel) switch (bits_per_pixel) { case 32: /* 0x88883316 */ - return MAKE_PF(3, 2, 0, 1, 3, 8, 8, 8, 8); + return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8); case 24: /* 0x88082219 */ - return MAKE_PF(4, 0, 1, 2, 2, 0, 8, 8, 8); + return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0); case 16: /* 0x65053118 */ return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0); @@ -1232,6 +1232,16 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, return 0; } +static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data) +{ + u32 int_mask = INT_UNDRUN; /* enable underrun detection */ + + if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE)) + int_mask |= INT_VSYNC; /* enable vertical sync */ + + clrbits32(&data->diu_reg->int_mask, int_mask); +} + /* turn on fb if count == 1 */ static int fsl_diu_open(struct fb_info *info, int user) @@ -1251,19 +1261,7 @@ static int fsl_diu_open(struct fb_info *info, int user) if (res < 0) mfbi->count--; else { - struct fsl_diu_data *data = mfbi->parent; - -#ifdef CONFIG_NOT_COHERENT_CACHE - /* - * Enable underrun detection and vertical sync - * interrupts. - */ - clrbits32(&data->diu_reg->int_mask, - INT_UNDRUN | INT_VSYNC); -#else - /* Enable underrun detection */ - clrbits32(&data->diu_reg->int_mask, INT_UNDRUN); -#endif + fsl_diu_enable_interrupts(mfbi->parent); fsl_diu_enable_panel(info); } } @@ -1283,9 +1281,18 @@ static int fsl_diu_release(struct fb_info *info, int user) mfbi->count--; if (mfbi->count == 0) { struct fsl_diu_data *data = mfbi->parent; + bool disable = true; + int i; - /* Disable interrupts */ - out_be32(&data->diu_reg->int_mask, 0xffffffff); + /* Disable interrupts only if all AOIs are closed */ + for (i = 0; i < NUM_AOIS; i++) { + struct mfb_info *mi = data->fsl_diu_info[i].par; + + if (mi->count) + disable = false; + } + if (disable) + out_be32(&data->diu_reg->int_mask, 0xffffffff); fsl_diu_disable_panel(info); } @@ -1614,14 +1621,6 @@ static int fsl_diu_probe(struct platform_device *pdev) out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr); out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr); - for (i = 0; i < NUM_AOIS; i++) { - ret = install_fb(&data->fsl_diu_info[i]); - if (ret) { - dev_err(&pdev->dev, "could not register fb %d\n", i); - goto error; - } - } - /* * Older versions of U-Boot leave interrupts enabled, so disable * all of them and clear the status register. @@ -1630,12 +1629,21 @@ static int fsl_diu_probe(struct platform_device *pdev) in_be32(&data->diu_reg->int_status); ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb", - &data->diu_reg); + data->diu_reg); if (ret) { dev_err(&pdev->dev, "could not claim irq\n"); goto error; } + for (i = 0; i < NUM_AOIS; i++) { + ret = install_fb(&data->fsl_diu_info[i]); + if (ret) { + dev_err(&pdev->dev, "could not register fb %d\n", i); + free_irq(data->irq, data->diu_reg); + goto error; + } + } + sysfs_attr_init(&data->dev_attr.attr); data->dev_attr.attr.name = "monitor"; data->dev_attr.attr.mode = S_IRUGO|S_IWUSR; @@ -1667,7 +1675,7 @@ static int fsl_diu_remove(struct platform_device *pdev) data = dev_get_drvdata(&pdev->dev); disable_lcdc(&data->fsl_diu_info[0]); - free_irq(data->irq, &data->diu_reg); + free_irq(data->irq, data->diu_reg); for (i = 0; i < NUM_AOIS; i++) uninstall_fb(&data->fsl_diu_info[i]); diff --git a/arch/powerpc/sysdev/bestcomm/ata.h b/include/linux/fsl/bestcomm/ata.h index 0b23718..0b23718 100644 --- a/arch/powerpc/sysdev/bestcomm/ata.h +++ b/include/linux/fsl/bestcomm/ata.h diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/include/linux/fsl/bestcomm/bestcomm.h index a0e2e6b..a0e2e6b 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.h +++ b/include/linux/fsl/bestcomm/bestcomm.h diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h b/include/linux/fsl/bestcomm/bestcomm_priv.h index 3b52f3f..3b52f3f 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h +++ b/include/linux/fsl/bestcomm/bestcomm_priv.h diff --git a/arch/powerpc/sysdev/bestcomm/fec.h b/include/linux/fsl/bestcomm/fec.h index ee565d9..ee565d9 100644 --- a/arch/powerpc/sysdev/bestcomm/fec.h +++ b/include/linux/fsl/bestcomm/fec.h diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/include/linux/fsl/bestcomm/gen_bd.h index de47260..de47260 100644 --- a/arch/powerpc/sysdev/bestcomm/gen_bd.h +++ b/include/linux/fsl/bestcomm/gen_bd.h diff --git a/arch/powerpc/sysdev/bestcomm/sram.h b/include/linux/fsl/bestcomm/sram.h index b6d6689..b6d6689 100644 --- a/arch/powerpc/sysdev/bestcomm/sram.h +++ b/include/linux/fsl/bestcomm/sram.h diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c index 9997c03..2a847ca 100644 --- a/sound/soc/fsl/mpc5200_dma.c +++ b/sound/soc/fsl/mpc5200_dma.c @@ -14,8 +14,8 @@ #include <sound/soc.h> -#include <sysdev/bestcomm/bestcomm.h> -#include <sysdev/bestcomm/gen_bd.h> +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/gen_bd.h> #include <asm/mpc52xx_psc.h> #include "mpc5200_dma.h" |