diff options
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/qoriq-thermal.txt | 63 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 42 |
2 files changed, 105 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt new file mode 100644 index 0000000..2bc9cb3 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt @@ -0,0 +1,63 @@ +* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs + +Required properties: +- compatible : Must include "fsl,qoriq-tmu". The version of the device is + determined by the TMU IP Block Revision Register (IPBRR0) at + offset 0x0BF8. + Table of correspondences between IPBRR0 values and example chips: + Value Device + ---------- ----- + 0x01900102 T1040 +- reg : Address range of TMU registers. +- interrupts : Contains the interrupt for TMU. +- fsl,tmu-range : Temperature range for TMU. Including the starting + temperature and number of calibration points for each range. +- fsl,tmu-calibration : Calibration table for TMU. This is required to + determine what a specific sensor reading translates to in degrees + Celsius. There are four calibration ranges, for each range we need + a couple of calibration data formatted like <TTCFGR, TSCFGR>. + Freescale provides the data required. + +Example: + +tmu@f0000 { + compatible = "fsl,qoriq-tmu"; + reg = <0xf0000 0x1000>; + interrupts = <18 2 0 0>; + fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; + fsl,tmu-calibration = <0x00000000 0x00000025 + 0x00000001 0x00000028 + 0x00000002 0x0000002d + 0x00000003 0x00000031 + 0x00000004 0x00000036 + 0x00000005 0x0000003a + 0x00000006 0x00000040 + 0x00000007 0x00000044 + 0x00000008 0x0000004a + 0x00000009 0x0000004f + 0x0000000a 0x00000054 + + 0x00010000 0x0000000d + 0x00010001 0x00000013 + 0x00010002 0x00000019 + 0x00010003 0x0000001f + 0x00010004 0x00000025 + 0x00010005 0x0000002d + 0x00010006 0x00000033 + 0x00010007 0x00000043 + 0x00010008 0x0000004b + 0x00010009 0x00000053 + + 0x00020000 0x00000010 + 0x00020001 0x00000017 + 0x00020002 0x0000001f + 0x00020003 0x00000029 + 0x00020004 0x00000031 + 0x00020005 0x0000003c + 0x00020006 0x00000042 + 0x00020007 0x0000004d + 0x00020008 0x00000056 + + 0x00030000 0x00000012 + 0x00030001 0x0000001d>; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 517491b..c1a26d6 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -512,6 +512,48 @@ reg = <0xea000 0x4000>; }; + tmu: tmu@f0000 { + compatible = "fsl,qoriq-tmu"; + reg = <0xf0000 0x1000>; + interrupts = <18 2 0 0>; + fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; + fsl,tmu-calibration = <0x00000000 0x00000025 + 0x00000001 0x00000028 + 0x00000002 0x0000002d + 0x00000003 0x00000031 + 0x00000004 0x00000036 + 0x00000005 0x0000003a + 0x00000006 0x00000040 + 0x00000007 0x00000044 + 0x00000008 0x0000004a + 0x00000009 0x0000004f + 0x0000000a 0x00000054 + + 0x00010000 0x0000000d + 0x00010001 0x00000013 + 0x00010002 0x00000019 + 0x00010003 0x0000001f + 0x00010004 0x00000025 + 0x00010005 0x0000002d + 0x00010006 0x00000033 + 0x00010007 0x00000043 + 0x00010008 0x0000004b + 0x00010009 0x00000053 + + 0x00020000 0x00000010 + 0x00020001 0x00000017 + 0x00020002 0x0000001f + 0x00020003 0x00000029 + 0x00020004 0x00000031 + 0x00020005 0x0000003c + 0x00020006 0x00000042 + 0x00020007 0x0000004d + 0x00020008 0x00000056 + + 0x00030000 0x00000012 + 0x00030001 0x0000001d>; + }; + scfg: global-utilities@fc000 { compatible = "fsl,t1040-scfg"; reg = <0xfc000 0x1000>; |