diff options
124 files changed, 4149 insertions, 1030 deletions
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index b0d5410..d9be7a9 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -66,6 +66,83 @@ the ACPI device explicitly to acpi_platform_device_ids list defined in drivers/acpi/acpi_platform.c. This limitation is only for the platform devices, SPI and I2C devices are created automatically as described below. +DMA support +~~~~~~~~~~~ +DMA controllers enumerated via ACPI should be registered in the system to +provide generic access to their resources. For example, a driver that would +like to be accessible to slave devices via generic API call +dma_request_slave_channel() must register itself at the end of the probe +function like this: + + err = devm_acpi_dma_controller_register(dev, xlate_func, dw); + /* Handle the error if it's not a case of !CONFIG_ACPI */ + +and implement custom xlate function if needed (usually acpi_dma_simple_xlate() +is enough) which converts the FixedDMA resource provided by struct +acpi_dma_spec into the corresponding DMA channel. A piece of code for that case +could look like: + + #ifdef CONFIG_ACPI + struct filter_args { + /* Provide necessary information for the filter_func */ + ... + }; + + static bool filter_func(struct dma_chan *chan, void *param) + { + /* Choose the proper channel */ + ... + } + + static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma) + { + dma_cap_mask_t cap; + struct filter_args args; + + /* Prepare arguments for filter_func */ + ... + return dma_request_channel(cap, filter_func, &args); + } + #else + static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma) + { + return NULL; + } + #endif + +dma_request_slave_channel() will call xlate_func() for each registered DMA +controller. In the xlate function the proper channel must be chosen based on +information in struct acpi_dma_spec and the properties of the controller +provided by struct acpi_dma. + +Clients must call dma_request_slave_channel() with the string parameter that +corresponds to a specific FixedDMA resource. By default "tx" means the first +entry of the FixedDMA resource array, "rx" means the second entry. The table +below shows a layout: + + Device (I2C0) + { + ... + Method (_CRS, 0, NotSerialized) + { + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x0018, 0x0004, Width32bit, _Y48) + FixedDMA (0x0019, 0x0005, Width32bit, ) + }) + ... + } + } + +So, the FixedDMA with request line 0x0018 is "tx" and next one is "rx" in +this example. + +In robust cases the client unfortunately needs to call +acpi_dma_request_slave_chan_by_index() directly and therefore choose the +specific FixedDMA resource by its index. + SPI serial bus support ~~~~~~~~~~~~~~~~~~~~~~ Slave devices behind SPI bus have SpiSerialBus resource attached to them. diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index 3c046ee..c80e8a3 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -1,14 +1,39 @@ * Atmel Direct Memory Access Controller (DMA) Required properties: -- compatible: Should be "atmel,<chip>-dma" -- reg: Should contain DMA registers location and length -- interrupts: Should contain DMA interrupt +- compatible: Should be "atmel,<chip>-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain DMA interrupt. +- #dma-cells: Must be <2>, used to represent the number of integer cells in +the dmas property of client devices. -Examples: +Example: -dma@ffffec00 { +dma0: dma@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <21>; + #dma-cells = <2>; +}; + +DMA clients connected to the Atmel DMA controller must use the format +described in the dma.txt file, using a three-cell specifier for each channel: +a phandle plus two interger cells. +The three cells in order are: + +1. A phandle pointing to the DMA controller. +2. The memory interface (16 most significant bits), the peripheral interface +(16 less significant bits). +3. The peripheral identifier for the hardware handshaking interface. The +identifier can be different for tx and rx. + +Example: + +i2c0@i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 4 6>; + dmas = <&dma0 1 7>, + <&dma0 1 8>; + dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt new file mode 100644 index 0000000..fff93d5 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -0,0 +1,22 @@ +* Marvell Armada 370/XP thermal management + +Required properties: + +- compatible: Should be set to one of the following: + marvell,armada370-thermal + marvell,armadaxp-thermal + +- reg: Device's register space. + Two entries are expected, see the examples below. + The first one is required for the sensor register; + the second one is required for the control register + to be used for sensor initialization (a.k.a. calibration). + +Example: + + thermal@d0018300 { + compatible = "marvell,armada370-thermal"; + reg = <0xd0018300 0x4 + 0xd0018304 0x4>; + status = "okay"; + }; diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt new file mode 100644 index 0000000..279ac0a --- /dev/null +++ b/Documentation/dmatest.txt @@ -0,0 +1,81 @@ + DMA Test Guide + ============== + + Andy Shevchenko <andriy.shevchenko@linux.intel.com> + +This small document introduces how to test DMA drivers using dmatest module. + + Part 1 - How to build the test module + +The menuconfig contains an option that could be found by following path: + Device Drivers -> DMA Engine support -> DMA Test client + +In the configuration file the option called CONFIG_DMATEST. The dmatest could +be built as module or inside kernel. Let's consider those cases. + + Part 2 - When dmatest is built as a module... + +After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest +folder with nodes will be created. They are the same as module parameters with +addition of the 'run' node that controls run and stop phases of the test. + +Note that in this case test will not run on load automatically. + +Example of usage: + % echo dma0chan0 > /sys/kernel/debug/dmatest/channel + % echo 2000 > /sys/kernel/debug/dmatest/timeout + % echo 1 > /sys/kernel/debug/dmatest/iterations + % echo 1 > /sys/kernel/debug/dmatest/run + +Hint: available channel list could be extracted by running the following +command: + % ls -1 /sys/class/dma/ + +After a while you will start to get messages about current status or error like +in the original code. + +Note that running a new test will stop any in progress test. + +The following command should return actual state of the test. + % cat /sys/kernel/debug/dmatest/run + +To wait for test done the user may perform a busy loop that checks the state. + + % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] + > do + > echo -n "." + > sleep 1 + > done + > echo + + Part 3 - When built-in in the kernel... + +The module parameters that is supplied to the kernel command line will be used +for the first performed test. After user gets a control, the test could be +interrupted or re-run with same or different parameters. For the details see +the above section "Part 2 - When dmatest is built as a module..." + +In both cases the module parameters are used as initial values for the test case. +You always could check them at run-time by running + % grep -H . /sys/module/dmatest/parameters/* + + Part 4 - Gathering the test results + +The module provides a storage for the test results in the memory. The gathered +data could be used after test is done. + +The special file 'results' in the debugfs represents gathered data of the in +progress test. The messages collected are printed to the kernel log as well. + +Example of output: + % cat /sys/kernel/debug/dmatest/results + dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) + +The message format is unified across the different types of errors. A number in +the parens represents additional information, e.g. error code, error counter, +or status. + +Comparison between buffers is stored to the dedicated structure. + +Note that the verify result is now accessible only via file 'results' in the +debugfs. diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 77a1d11..6f83fa9 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -72,11 +72,11 @@ in this document, but drivers acting as clients to the GPIO interface must not care how it's implemented.) That said, if the convention is supported on their platform, drivers should -use it when possible. Platforms must declare GENERIC_GPIO support in their -Kconfig (boolean true), and provide an <asm/gpio.h> file. Drivers that can't -work without standard GPIO calls should have Kconfig entries which depend -on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as -optimized-away stubs, when drivers use the include file: +use it when possible. Platforms must select ARCH_REQUIRE_GPIOLIB or +ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig. Drivers that can't work without +standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The +GPIO calls are available, either as "real code" or as optimized-away stubs, +when drivers use the include file: #include <linux/gpio.h> diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation index b73bbfb..36a3e79 100644 --- a/Documentation/thermal/exynos_thermal_emulation +++ b/Documentation/thermal/exynos_thermal_emulation @@ -13,11 +13,11 @@ Thermal emulation mode supports software debug for TMU's operation. User can set manually with software code and TMU will read current temperature from user value not from sensor's value. -Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available. -When it's enabled, sysfs node will be created under -/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'. +Enabling CONFIG_THERMAL_EMULATION option will make this support available. +When it's enabled, sysfs node will be created as +/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp. -The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any +The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any temperature you want to update to sysfs node, it automatically enable emulation mode and current temperature will be changed into it. (Exynos also supports user changable delay time which would be used to delay of diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 6859661..a71bd5b 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -31,15 +31,17 @@ temperature) and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *type, int trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops) + struct thermal_zone_device_ops *ops, + const struct thermal_zone_params *tzp, + int passive_delay, int polling_delay)) This interface function adds a new thermal zone device (sensor) to /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the thermal cooling devices registered at the same time. - name: the thermal zone name. + type: the thermal zone type. trips: the total number of trip points this thermal zone supports. mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable. devdata: device private data @@ -57,6 +59,12 @@ temperature) and throttle appropriate devices. will be fired. .set_emul_temp: set the emulation temperature which helps in debugging different threshold temperature points. + tzp: thermal zone platform parameters. + passive_delay: number of milliseconds to wait between polls when + performing passive cooling. + polling_delay: number of milliseconds to wait between polls when checking + whether trip points have been crossed (0 for interrupt driven systems). + 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) @@ -265,6 +273,10 @@ emul_temp Unit: millidegree Celsius WO, Optional + WARNING: Be careful while enabling this option on production systems, + because userland can easily disable the thermal policy by simply + flooding this sysfs node with low temperature values. + ***************************** * Cooling device attributes * ***************************** @@ -363,7 +375,7 @@ This function returns the thermal_instance corresponding to a given {thermal_zone, cooling_device, trip_point} combination. Returns NULL if such an instance does not exist. -5.3:notify_thermal_framework: +5.3:thermal_notify_framework: This function handles the trip events from sensor drivers. It starts throttling the cooling devices according to the policy configured. For CRITICAL and HOT trip points, this notifies the respective drivers, @@ -375,11 +387,3 @@ platform data is provided, this uses the step_wise throttling policy. This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. - -5.5:thermal_register_governor: -This function lets the various thermal governors to register themselves -with the Thermal framework. At run time, depending on a zone's platform -data, a particular governor is used for throttling. - -5.6:thermal_unregister_governor: -This function unregisters a governor from the thermal framework. diff --git a/Documentation/zh_CN/gpio.txt b/Documentation/zh_CN/gpio.txt index 4fa7b4e..d5b8f01 100644 --- a/Documentation/zh_CN/gpio.txt +++ b/Documentation/zh_CN/gpio.txt @@ -84,10 +84,10 @@ GPIO 公约 控制器的抽象函数来实现它。(有一些可选的代码能支持这种策略的实现,本文档 后面会介绍，但作为 GPIO 接口的客户端驱动程序必须与它的实现无关。) -也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。平台 -必须在 Kconfig 中声明对 GENERIC_GPIO的支持 (布尔型 true)，并提供 -一个 <asm/gpio.h> 文件。那些调用标准 GPIO 函数的驱动应该在 Kconfig -入口中声明依赖GENERIC_GPIO。当驱动包含文件: +也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。同时，平台 +必须在 Kconfig 中选择 ARCH_REQUIRE_GPIOLIB 或者 ARCH_WANT_OPTIONAL_GPIOLIB +选项。那些调用标准 GPIO 函数的驱动应该在 Kconfig 入口中声明依赖GENERIC_GPIO。 +当驱动包含文件: #include <linux/gpio.h> diff --git a/MAINTAINERS b/MAINTAINERS index 5f5c895..3d7782b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8029,11 +8029,14 @@ F: arch/xtensa/ THERMAL M: Zhang Rui <rui.zhang@intel.com> +M: Eduardo Valentin <eduardo.valentin@ti.com> L: linux-pm@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git +Q: https://patchwork.kernel.org/project/linux-pm/list/ S: Supported F: drivers/thermal/ F: include/linux/thermal.h +F: include/linux/cpu_cooling.h THINGM BLINK(1) USB RGB LED DRIVER M: Vivien Didelot <vivien.didelot@savoirfairelinux.com> diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 8629127..837a1f2 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -55,9 +55,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_GPIO - bool - config ZONE_DMA bool default y diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aa71a23..46e2b52 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -109,9 +109,6 @@ config MIGHT_HAVE_PCI config SYS_SUPPORTS_APM_EMULATION bool -config GENERIC_GPIO - bool - config HAVE_TCM bool select GENERIC_ALLOCATOR diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index dab9fc0..49fd0d5 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/of.h> #include <linux/omap-dma.h> #include "soc.h" @@ -304,6 +305,9 @@ static int __init omap2_system_dma_init(void) if (res) return res; + if (of_have_populated_dt()) + return res; + pdev = platform_device_register_full(&omap_dma_dev_info); if (IS_ERR(pdev)) return PTR_ERR(pdev); diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 2eca54b..9433605 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -3,6 +3,6 @@ # ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o +orion-gpio-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index e39c2ba..249fe63 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -150,7 +150,7 @@ err_out: } /* - * GENERIC_GPIO primitives. + * GPIO primitives. */ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 43b0e9f..48347dc 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -95,9 +95,6 @@ config SWIOTLB config IOMMU_HELPER def_bool SWIOTLB -config GENERIC_GPIO - bool - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 22c4030..bdc3558 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -26,9 +26,6 @@ config AVR32 There is an AVR32 Linux project with a web page at http://avr32linux.org/. -config GENERIC_GPIO - def_bool y - config STACKTRACE_SUPPORT def_bool y diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 453ebe4..a117652 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -27,7 +27,7 @@ config BLACKFIN select HAVE_OPROFILE select HAVE_PERF_EVENTS select ARCH_HAVE_CUSTOM_GPIO_H - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select HAVE_UID16 select HAVE_UNDERSCORE_SYMBOL_PREFIX select VIRT_TO_BUS @@ -52,9 +52,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_GPIO - def_bool y - config FORCE_MAX_ZONEORDER int default "14" diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index 841325f..33a9792 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -155,9 +155,6 @@ source "mm/Kconfig" source "kernel/Kconfig.hz" -config GENERIC_GPIO - def_bool n - endmenu source "init/Kconfig" diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d393f84..1a2b774 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -101,9 +101,6 @@ config GENERIC_CALIBRATE_DELAY config HAVE_SETUP_PER_CPU_AREA def_bool y -config GENERIC_GPIO - bool - config DMI bool default y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 6de8133..821170e 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -35,9 +35,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool -config GENERIC_GPIO - bool - config GENERIC_HWEIGHT bool default y diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index b1cfff8..d266787 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -22,8 +22,7 @@ config M68KCLASSIC config COLDFIRE bool "Coldfire CPU family support" - select GENERIC_GPIO - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 diff --git a/arch/metag/Kconfig b/arch/metag/Kconfig index 6f16c14..dcd9440 100644 --- a/arch/metag/Kconfig +++ b/arch/metag/Kconfig @@ -52,9 +52,6 @@ config GENERIC_HWEIGHT config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_GPIO - def_bool n - config NO_IOPORT def_bool y diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 54237af..d22a4ec 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -54,9 +54,6 @@ config GENERIC_HWEIGHT config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_GPIO - bool - config GENERIC_CSUM def_bool y diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5f3794..a90cfc7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -61,8 +61,7 @@ config MIPS_ALCHEMY select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select GENERIC_GPIO - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_ZBOOT select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI @@ -225,7 +224,6 @@ config MACH_JZ4740 select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT select IRQ_CPU - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select SYS_HAS_EARLY_PRINTK select HAVE_PWM @@ -937,7 +935,6 @@ config CSRC_SB1250 bool config GPIO_TXX9 - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB bool @@ -1009,9 +1006,6 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN config ISA_DMA_API bool -config GENERIC_GPIO - bool - config HOLES_IN_ZONE bool @@ -1112,7 +1106,6 @@ config SOC_PNX833X select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_GPIO select CPU_MIPSR2_IRQ_VI config SOC_PNX8335 @@ -1203,7 +1196,6 @@ config CPU_LOONGSON2F bool "Loongson 2F" depends on SYS_HAS_CPU_LOONGSON2F select CPU_LOONGSON2 - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help The Loongson 2F processor implements the MIPS III instruction set diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index e526488..4c57b3e 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -4,7 +4,7 @@ obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ pci.o bonito-irq.o mem.o machtype.o platform.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_GPIOLIB) += gpio.o # # Serial port support diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 5524f2c..5364aab 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -118,7 +118,7 @@ EXPORT_SYMBOL(clk_put); /* GPIO support */ -#ifdef CONFIG_GENERIC_GPIO +#ifdef CONFIG_GPIOLIB int gpio_to_irq(unsigned gpio) { return -EINVAL; diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 81b9ddb..1072bfd 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -44,9 +44,6 @@ config GENERIC_HWEIGHT config NO_IOPORT def_bool y -config GENERIC_GPIO - def_bool y - config TRACE_IRQFLAGS_SUPPORT def_bool y diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bbbe021..c33e3ad 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -82,11 +82,6 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_GPIO - bool - help - Generic GPIO API support - config PPC bool default y diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index bd40bbb..6e287f1 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -138,7 +138,6 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 40x select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help Enable gpiolib support for ppc40x based boards diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 7be9336..d6c7506 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -248,7 +248,6 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 44x select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help Enable gpiolib support for ppc440 based boards diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 8f02b05..efdd37c 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -203,7 +203,6 @@ config GE_IMP3A select DEFAULT_UIMAGE select SWIOTLB select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA help @@ -328,7 +327,7 @@ config B4_QDS select PPC_E500MC select PHYS_64BIT select SWIOTLB - select GENERIC_GPIO + select GPIOLIB select ARCH_REQUIRE_GPIOLIB select HAS_RAPIDIO select PPC_EPAPR_HV_PIC diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 7a6279e..1afd1e4 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -37,7 +37,6 @@ config GEF_PPC9A bool "GE PPC9A" select DEFAULT_UIMAGE select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA help @@ -47,7 +46,6 @@ config GEF_SBC310 bool "GE SBC310" select DEFAULT_UIMAGE select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA help @@ -57,7 +55,6 @@ config GEF_SBC610 bool "GE SBC610" select DEFAULT_UIMAGE select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA select HAS_RAPIDIO diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 1fb0b3c..8dec3c0 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -114,7 +114,6 @@ config 8xx_COPYBACK config 8xx_GPIO bool "GPIO API Support" - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Saying Y here will cause the ports on an MPC8xx processor to be used diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 34d224b..a881232 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -302,7 +302,6 @@ config QUICC_ENGINE config QE_GPIO bool "QE GPIO support" depends on QUICC_ENGINE - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here if you're going to use hardware that connects to the @@ -315,7 +314,6 @@ config CPM2 select PPC_LIB_RHEAP select PPC_PCI_CHOICE select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that @@ -353,7 +351,6 @@ config OF_RTC config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" depends on PPC - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here to support simple, memory-mapped GPIO controllers. @@ -364,7 +361,6 @@ config SIMPLE_GPIO config MCU_MPC8349EMITX bool "MPC8349E-mITX MCU driver" depends on I2C=y && PPC_83xx - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here to enable soft power-off functionality on the Freescale diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 78d8ace..8c868cf 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -93,9 +93,6 @@ config GENERIC_CSUM config GENERIC_HWEIGHT def_bool y -config GENERIC_GPIO - def_bool n - config GENERIC_CALIBRATE_DELAY bool diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile index 8ae56e9..45d32e3 100644 --- a/arch/sh/boards/mach-sdk7786/Makefile +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -1,4 +1,4 @@ obj-y := fpga.o irq.o nmi.o setup.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile index 708c21c..0cbe3d0 100644 --- a/arch/sh/boards/mach-x3proto/Makefile +++ b/arch/sh/boards/mach-x3proto/Makefile @@ -1,3 +1,3 @@ obj-y += setup.o ilsel.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_GPIOLIB) += gpio.o diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 7fdc102..990195d 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -21,4 +21,4 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7203) := pinmux-sh7203.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7264) := pinmux-sh7264.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7269) := pinmux-sh7269.o -obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) +obj-$(CONFIG_GPIOLIB) += $(pinmux-y) diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 6f13f33..d3634ae 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -30,4 +30,4 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7712) := clock-sh7712.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7720) := pinmux-sh7720.o obj-y += $(clock-y) -obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) +obj-$(CONFIG_GPIOLIB) += $(pinmux-y) diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 8fc6ec2..0705df7 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -47,6 +47,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SHX3) := pinmux-shx3.o obj-y += $(clock-y) obj-$(CONFIG_SMP) += $(smp-y) -obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) +obj-$(CONFIG_GPIOLIB) += $(pinmux-y) obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index a639c0d..9ac9f16 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -137,11 +137,6 @@ config GENERIC_ISA_DMA bool default y if SPARC32 -config GENERIC_GPIO - bool - help - Generic GPIO API support - config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y if SPARC64 diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 2943e3a..41bcc00 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -23,9 +23,6 @@ config UNICORE32 designs licensed by PKUnity Ltd. Please see web page at <http://www.pkunity.com/>. -config GENERIC_GPIO - def_bool y - config GENERIC_CSUM def_bool y @@ -156,7 +153,7 @@ source "mm/Kconfig" config LEDS def_bool y - depends on GENERIC_GPIO + depends on GPIOLIB config ALIGNMENT_TRAP def_bool y @@ -219,7 +216,6 @@ if ARCH_PUV3 config PUV3_GPIO bool depends on !ARCH_FPGA - select GENERIC_GPIO select GPIO_SYSFS default y diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5db2117..6a154a9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -174,9 +174,6 @@ config GENERIC_BUG_RELATIVE_POINTERS config GENERIC_HWEIGHT def_bool y -config GENERIC_GPIO - bool - config ARCH_MAY_HAVE_PC_FDC def_bool y depends on ISA_DMA_API diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index b09de49..acdfc61 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -33,9 +33,6 @@ config RWSEM_XCHGADD_ALGORITHM config GENERIC_HWEIGHT def_bool y -config GENERIC_GPIO - bool - config ARCH_HAS_ILOG2_U32 def_bool n diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index ddab37b..77c52f8 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -10,7 +10,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index eaf1b8f..4799c6a 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -10,7 +10,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index aeaea32..e992489 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -63,8 +63,6 @@ config INTEL_IOATDMA depends on PCI && X86 select DMA_ENGINE select DCA - select ASYNC_TX_DISABLE_PQ_VAL_DMA - select ASYNC_TX_DISABLE_XOR_VAL_DMA help Enable support for the Intel(R) I/OAT DMA engine present in recent Intel Xeon chipsets. @@ -174,15 +172,7 @@ config TEGRA20_APB_DMA This DMA controller transfers data from memory to peripheral fifo or vice versa. It does not support memory to memory data transfer. - - -config SH_DMAE - tristate "Renesas SuperH DMAC support" - depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE) - depends on !SH_DMA_API - select DMA_ENGINE - help - Enable support for the Renesas SuperH DMA controllers. +source "drivers/dma/sh/Kconfig" config COH901318 bool "ST-Ericsson COH901318 DMA support" @@ -328,6 +318,10 @@ config DMA_ENGINE config DMA_VIRTUAL_CHANNELS tristate +config DMA_ACPI + def_bool y + depends on ACPI + config DMA_OF def_bool y depends on OF diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 488e3ff..a2b0df5 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -3,6 +3,7 @@ ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG obj-$(CONFIG_DMA_ENGINE) += dmaengine.o obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o +obj-$(CONFIG_DMA_ACPI) += acpi-dma.o obj-$(CONFIG_DMA_OF) += of-dma.o obj-$(CONFIG_NET_DMA) += iovlock.o @@ -18,7 +19,7 @@ obj-$(CONFIG_DW_DMAC) += dw_dmac.o obj-$(CONFIG_AT_HDMAC) += at_hdmac.o obj-$(CONFIG_MX3_IPU) += ipu/ obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o -obj-$(CONFIG_SH_DMAE) += sh/ +obj-$(CONFIG_SH_DMAE_BASE) += sh/ obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/ obj-$(CONFIG_IMX_SDMA) += imx-sdma.o diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c new file mode 100644 index 0000000..ba6fc62 --- /dev/null +++ b/drivers/dma/acpi-dma.c @@ -0,0 +1,279 @@ +/* + * ACPI helpers for DMA request / controller + * + * Based on of-dma.c + * + * Copyright (C) 2013, Intel Corporation + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/acpi_dma.h> + +static LIST_HEAD(acpi_dma_list); +static DEFINE_MUTEX(acpi_dma_lock); + +/** + * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers + * @dev: struct device of DMA controller + * @acpi_dma_xlate: translation function which converts a dma specifier + * into a dma_chan structure + * @data pointer to controller specific data to be used by + * translation function + * + * Returns 0 on success or appropriate errno value on error. + * + * Allocated memory should be freed with appropriate acpi_dma_controller_free() + * call. + */ +int acpi_dma_controller_register(struct device *dev, + struct dma_chan *(*acpi_dma_xlate) + (struct acpi_dma_spec *, struct acpi_dma *), + void *data) +{ + struct acpi_device *adev; + struct acpi_dma *adma; + + if (!dev || !acpi_dma_xlate) + return -EINVAL; + + /* Check if the device was enumerated by ACPI */ + if (!ACPI_HANDLE(dev)) + return -EINVAL; + + if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev)) + return -EINVAL; + + adma = kzalloc(sizeof(*adma), GFP_KERNEL); + if (!adma) + return -ENOMEM; + + adma->dev = dev; + adma->acpi_dma_xlate = acpi_dma_xlate; + adma->data = data; + + /* Now queue acpi_dma controller structure in list */ + mutex_lock(&acpi_dma_lock); + list_add_tail(&adma->dma_controllers, &acpi_dma_list); + mutex_unlock(&acpi_dma_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(acpi_dma_controller_register); + +/** + * acpi_dma_controller_free - Remove a DMA controller from ACPI DMA helpers list + * @dev: struct device of DMA controller + * + * Memory allocated by acpi_dma_controller_register() is freed here. + */ +int acpi_dma_controller_free(struct device *dev) +{ + struct acpi_dma *adma; + + if (!dev) + return -EINVAL; + + mutex_lock(&acpi_dma_lock); + + list_for_each_entry(adma, &acpi_dma_list, dma_controllers) + if (adma->dev == dev) { + list_del(&adma->dma_controllers); + mutex_unlock(&acpi_dma_lock); + kfree(adma); + return 0; + } + + mutex_unlock(&acpi_dma_lock); + return -ENODEV; +} +EXPORT_SYMBOL_GPL(acpi_dma_controller_free); + +static void devm_acpi_dma_release(struct device *dev, void *res) +{ + acpi_dma_controller_free(dev); +} + +/** + * devm_acpi_dma_controller_register - resource managed acpi_dma_controller_register() + * @dev: device that is registering this DMA controller + * @acpi_dma_xlate: translation function + * @data pointer to controller specific data + * + * Managed acpi_dma_controller_register(). DMA controller registered by this + * function are automatically freed on driver detach. See + * acpi_dma_controller_register() for more information. + */ +int devm_acpi_dma_controller_register(struct device *dev, + struct dma_chan *(*acpi_dma_xlate) + (struct acpi_dma_spec *, struct acpi_dma *), + void *data) +{ + void *res; + int ret; + + res = devres_alloc(devm_acpi_dma_release, 0, GFP_KERNEL); + if (!res) + return -ENOMEM; + + ret = acpi_dma_controller_register(dev, acpi_dma_xlate, data); + if (ret) { + devres_free(res); + return ret; + } + devres_add(dev, res); + return 0; +} +EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_register); + +/** + * devm_acpi_dma_controller_free - resource managed acpi_dma_controller_free() + * + * Unregister a DMA controller registered with + * devm_acpi_dma_controller_register(). Normally this function will not need to + * be called and the resource management code will ensure that the resource is + * freed. + */ +void devm_acpi_dma_controller_free(struct device *dev) +{ + WARN_ON(devres_destroy(dev, devm_acpi_dma_release, NULL, NULL)); +} +EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free); + +struct acpi_dma_parser_data { + struct acpi_dma_spec dma_spec; + size_t index; + size_t n; +}; + +/** + * acpi_dma_parse_fixed_dma - Parse FixedDMA ACPI resources to a DMA specifier + * @res: struct acpi_resource to get FixedDMA resources from + * @data: pointer to a helper struct acpi_dma_parser_data + */ +static int acpi_dma_parse_fixed_dma(struct acpi_resource *res, void *data) +{ + struct acpi_dma_parser_data *pdata = data; + + if (res->type == ACPI_RESOURCE_TYPE_FIXED_DMA) { + struct acpi_resource_fixed_dma *dma = &res->data.fixed_dma; + + if (pdata->n++ == pdata->index) { + pdata->dma_spec.chan_id = dma->channels; + pdata->dma_spec.slave_id = dma->request_lines; + } + } + + /* Tell the ACPI core to skip this resource */ + return 1; +} + +/** + * acpi_dma_request_slave_chan_by_index - Get the DMA slave channel + * @dev: struct device to get DMA request from + * @index: index of FixedDMA descriptor for @dev + * + * Returns pointer to appropriate dma channel on success or NULL on error. + */ +struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, + size_t index) +{ + struct acpi_dma_parser_data pdata; + struct acpi_dma_spec *dma_spec = &pdata.dma_spec; + struct list_head resource_list; + struct acpi_device *adev; + struct acpi_dma *adma; + struct dma_chan *chan = NULL; + + /* Check if the device was enumerated by ACPI */ + if (!dev || !ACPI_HANDLE(dev)) + return NULL; + + if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev)) + return NULL; + + memset(&pdata, 0, sizeof(pdata)); + pdata.index = index; + + /* Initial values for the request line and channel */ + dma_spec->chan_id = -1; + dma_spec->slave_id = -1; + + INIT_LIST_HEAD(&resource_list); + acpi_dev_get_resources(adev, &resource_list, + acpi_dma_parse_fixed_dma, &pdata); + acpi_dev_free_resource_list(&resource_list); + + if (dma_spec->slave_id < 0 || dma_spec->chan_id < 0) + return NULL; + + mutex_lock(&acpi_dma_lock); + + list_for_each_entry(adma, &acpi_dma_list, dma_controllers) { + dma_spec->dev = adma->dev; + chan = adma->acpi_dma_xlate(dma_spec, adma); + if (chan) + break; + } + + mutex_unlock(&acpi_dma_lock); + return chan; +} +EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_index); + +/** + * acpi_dma_request_slave_chan_by_name - Get the DMA slave channel + * @dev: struct device to get DMA request from + * @name: represents corresponding FixedDMA descriptor for @dev + * + * In order to support both Device Tree and ACPI in a single driver we + * translate the names "tx" and "rx" here based on the most common case where + * the first FixedDMA descriptor is TX and second is RX. + * + * Returns pointer to appropriate dma channel on success or NULL on error. + */ +struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev, + const char *name) +{ + size_t index; + + if (!strcmp(name, "tx")) + index = 0; + else if (!strcmp(name, "rx")) + index = 1; + else + return NULL; + + return acpi_dma_request_slave_chan_by_index(dev, index); +} +EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_name); + +/** + * acpi_dma_simple_xlate - Simple ACPI DMA engine translation helper + * @dma_spec: pointer to ACPI DMA specifier + * @adma: pointer to ACPI DMA controller data + * + * A simple translation function for ACPI based devices. Passes &struct + * dma_spec to the DMA controller driver provided filter function. Returns + * pointer to the channel if found or %NULL otherwise. + */ +struct dma_chan *acpi_dma_simple_xlate(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma) +{ + struct acpi_dma_filter_info *info = adma->data; + + if (!info || !info->filter_fn) + return NULL; + + return dma_request_channel(info->dma_cap, info->filter_fn, dma_spec); +} +EXPORT_SYMBOL_GPL(acpi_dma_simple_xlate); diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 88cfc61..e923cda 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -24,6 +24,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_dma.h> #include "at_hdmac_regs.h" #include "dmaengine.h" @@ -677,7 +678,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, ctrlb |= ATC_DST_ADDR_MODE_FIXED | ATC_SRC_ADDR_MODE_INCR | ATC_FC_MEM2PER - | ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF); + | ATC_SIF(atchan->mem_if) | ATC_DIF(atchan->per_if); reg = sconfig->dst_addr; for_each_sg(sgl, sg, sg_len, i) { struct at_desc *desc; @@ -716,7 +717,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, ctrlb |= ATC_DST_ADDR_MODE_INCR | ATC_SRC_ADDR_MODE_FIXED | ATC_FC_PER2MEM - | ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF); + | ATC_SIF(atchan->per_if) | ATC_DIF(atchan->mem_if); reg = sconfig->src_addr; for_each_sg(sgl, sg, sg_len, i) { @@ -822,8 +823,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc, desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED | ATC_SRC_ADDR_MODE_INCR | ATC_FC_MEM2PER - | ATC_SIF(AT_DMA_MEM_IF) - | ATC_DIF(AT_DMA_PER_IF); + | ATC_SIF(atchan->mem_if) + | ATC_DIF(atchan->per_if); break; case DMA_DEV_TO_MEM: @@ -833,8 +834,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc, desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR | ATC_SRC_ADDR_MODE_FIXED | ATC_FC_PER2MEM - | ATC_SIF(AT_DMA_PER_IF) - | ATC_DIF(AT_DMA_MEM_IF); + | ATC_SIF(atchan->per_if) + | ATC_DIF(atchan->mem_if); break; default: @@ -1188,6 +1189,67 @@ static void atc_free_chan_resources(struct dma_chan *chan) dev_vdbg(chan2dev(chan), "free_chan_resources: done\n"); } +#ifdef CONFIG_OF +static bool at_dma_filter(struct dma_chan *chan, void *slave) +{ + struct at_dma_slave *atslave = slave; + + if (atslave->dma_dev == chan->device->dev) { + chan->private = atslave; + return true; + } else { + return false; + } +} + +static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec, + struct of_dma *of_dma) +{ + struct dma_chan *chan; + struct at_dma_chan *atchan; + struct at_dma_slave *atslave; + dma_cap_mask_t mask; + unsigned int per_id; + struct platform_device *dmac_pdev; + + if (dma_spec->args_count != 2) + return NULL; + + dmac_pdev = of_find_device_by_node(dma_spec->np); + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL); + if (!atslave) + return NULL; + /* + * We can fill both SRC_PER and DST_PER, one of these fields will be + * ignored depending on DMA transfer direction. + */ + per_id = dma_spec->args[1]; + atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_DST_H2SEL_HW + | ATC_SRC_H2SEL_HW | ATC_DST_PER(per_id) + | ATC_SRC_PER(per_id); + atslave->dma_dev = &dmac_pdev->dev; + + chan = dma_request_channel(mask, at_dma_filter, atslave); + if (!chan) + return NULL; + + atchan = to_at_dma_chan(chan); + atchan->per_if = dma_spec->args[0] & 0xff; + atchan->mem_if = (dma_spec->args[0] >> 16) & 0xff; + + return chan; +} +#else +static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec, + struct of_dma *of_dma) +{ + return NULL; +} +#endif /*-- Module Management -----------------------------------------------*/ @@ -1342,6 +1404,8 @@ static int __init at_dma_probe(struct platform_device *pdev) for (i = 0; i < plat_dat->nr_channels; i++) { struct at_dma_chan *atchan = &atdma->chan[i]; + atchan->mem_if = AT_DMA_MEM_IF; + atchan->per_if = AT_DMA_PER_IF; atchan->chan_common.device = &atdma->dma_common; dma_cookie_init(&atchan->chan_common); list_add_tail(&atchan->chan_common.device_node, @@ -1388,8 +1452,25 @@ static int __init at_dma_probe(struct platform_device *pdev) dma_async_device_register(&atdma->dma_common); + /* + * Do not return an error if the dmac node is not present in order to + * not break the existing way of requesting channel with + * dma_request_channel(). + */ + if (pdev->dev.of_node) { + err = of_dma_controller_register(pdev->dev.of_node, + at_dma_xlate, atdma); + if (err) { + dev_err(&pdev->dev, "could not register of_dma_controller\n"); + goto err_of_dma_controller_register; + } + } + return 0; +err_of_dma_controller_register: + dma_async_device_unregister(&atdma->dma_common); + dma_pool_destroy(atdma->dma_desc_pool); err_pool_create: platform_set_drvdata(pdev, NULL); free_irq(platform_get_irq(pdev, 0), atdma); @@ -1406,7 +1487,7 @@ err_kfree: return err; } -static int __exit at_dma_remove(struct platform_device *pdev) +static int at_dma_remove(struct platform_device *pdev) { struct at_dma *atdma = platform_get_drvdata(pdev); struct dma_chan *chan, *_chan; @@ -1564,7 +1645,7 @@ static const struct dev_pm_ops at_dma_dev_pm_ops = { }; static struct platform_driver at_dma_driver = { - .remove = __exit_p(at_dma_remove), + .remove = at_dma_remove, .shutdown = at_dma_shutdown, .id_table = atdma_devtypes, .driver = { diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 0eb3c13..c604d26 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -220,6 +220,8 @@ enum atc_status { * @device: parent device * @ch_regs: memory mapped register base * @mask: channel index in a mask + * @per_if: peripheral interface + * @mem_if: memory interface * @status: transmit status information from irq/prep* functions * to tasklet (use atomic operations) * @tasklet: bottom half to finish transaction work @@ -238,6 +240,8 @@ struct at_dma_chan { struct at_dma *device; void __iomem *ch_regs; u8 mask; + u8 per_if; + u8 mem_if; unsigned long status; struct tasklet_struct tasklet; u32 save_cfg; diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 797940e..3b23061 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -2748,7 +2748,7 @@ static int __init coh901318_probe(struct platform_device *pdev) return err; } -static int __exit coh901318_remove(struct platform_device *pdev) +static int coh901318_remove(struct platform_device *pdev) { struct coh901318_base *base = platform_get_drvdata(pdev); @@ -2760,7 +2760,7 @@ static int __exit coh901318_remove(struct platform_device *pdev) static struct platform_driver coh901318_driver = { - .remove = __exit_p(coh901318_remove), + .remove = coh901318_remove, .driver = { .name = "coh901318", }, diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index b2728d6..93f7992 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -62,6 +62,8 @@ #include <linux/rculist.h> #include <linux/idr.h> #include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/acpi_dma.h> #include <linux/of_dma.h> static DEFINE_MUTEX(dma_list_mutex); @@ -174,7 +176,8 @@ static struct class dma_devclass = { #define dma_device_satisfies_mask(device, mask) \ __dma_device_satisfies_mask((device), &(mask)) static int -__dma_device_satisfies_mask(struct dma_device *device, dma_cap_mask_t *want) +__dma_device_satisfies_mask(struct dma_device *device, + const dma_cap_mask_t *want) { dma_cap_mask_t has; @@ -463,7 +466,8 @@ static void dma_channel_rebalance(void) } } -static struct dma_chan *private_candidate(dma_cap_mask_t *mask, struct dma_device *dev, +static struct dma_chan *private_candidate(const dma_cap_mask_t *mask, + struct dma_device *dev, dma_filter_fn fn, void *fn_param) { struct dma_chan *chan; @@ -505,7 +509,8 @@ static struct dma_chan *private_candidate(dma_cap_mask_t *mask, struct dma_devic * @fn: optional callback to disposition available channels * @fn_param: opaque parameter to pass to dma_filter_fn */ -struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param) +struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, + dma_filter_fn fn, void *fn_param) { struct dma_device *device, *_d; struct dma_chan *chan = NULL; @@ -555,12 +560,16 @@ EXPORT_SYMBOL_GPL(__dma_request_channel); * @dev: pointer to client device structure * @name: slave channel name */ -struct dma_chan *dma_request_slave_channel(struct device *dev, char *name) +struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { /* If device-tree is present get slave info from here */ if (dev->of_node) return of_dma_request_slave_channel(dev->of_node, name); + /* If device was enumerated by ACPI get slave info from here */ + if (ACPI_HANDLE(dev)) + return acpi_dma_request_slave_chan_by_name(dev, name); + return NULL; } EXPORT_SYMBOL_GPL(dma_request_slave_channel); diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index a2c8904..d8ce4ec 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -2,6 +2,7 @@ * DMA Engine test module * * Copyright (C) 2007 Atmel Corporation + * Copyright (C) 2013 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -18,6 +19,10 @@ #include <linux/random.h> #include <linux/slab.h> #include <linux/wait.h> +#include <linux/ctype.h> +#include <linux/debugfs.h> +#include <linux/uaccess.h> +#include <linux/seq_file.h> static unsigned int test_buf_size = 16384; module_param(test_buf_size, uint, S_IRUGO); @@ -61,6 +66,9 @@ module_param(timeout, uint, S_IRUGO); MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), " "Pass -1 for infinite timeout"); +/* Maximum amount of mismatched bytes in buffer to print */ +#define MAX_ERROR_COUNT 32 + /* * Initialization patterns. All bytes in the source buffer has bit 7 * set, all bytes in the destination buffer has bit 7 cleared. @@ -78,13 +86,65 @@ MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), " #define PATTERN_OVERWRITE 0x20 #define PATTERN_COUNT_MASK 0x1f +enum dmatest_error_type { + DMATEST_ET_OK, + DMATEST_ET_MAP_SRC, + DMATEST_ET_MAP_DST, + DMATEST_ET_PREP, + DMATEST_ET_SUBMIT, + DMATEST_ET_TIMEOUT, + DMATEST_ET_DMA_ERROR, + DMATEST_ET_DMA_IN_PROGRESS, + DMATEST_ET_VERIFY, + DMATEST_ET_VERIFY_BUF, +}; + +struct dmatest_verify_buffer { + unsigned int index; + u8 expected; + u8 actual; +}; + +struct dmatest_verify_result { + unsigned int error_count; + struct dmatest_verify_buffer data[MAX_ERROR_COUNT]; + u8 pattern; + bool is_srcbuf; +}; + +struct dmatest_thread_result { + struct list_head node; + unsigned int n; + unsigned int src_off; + unsigned int dst_off; + unsigned int len; + enum dmatest_error_type type; + union { + unsigned long data; + dma_cookie_t cookie; + enum dma_status status; + int error; + struct dmatest_verify_result *vr; + }; +}; + +struct dmatest_result { + struct list_head node; + char *name; + struct list_head results; +}; + +struct dmatest_info; + struct dmatest_thread { struct list_head node; + struct dmatest_info *info; struct task_struct *task; struct dma_chan *chan; u8 **srcs; u8 **dsts; enum dma_transaction_type type; + bool done; }; struct dmatest_chan { @@ -93,25 +153,69 @@ struct dmatest_chan { struct list_head threads; }; -/* - * These are protected by dma_list_mutex since they're only used by - * the DMA filter function callback +/** + * struct dmatest_params - test parameters. + * @buf_size: size of the memcpy test buffer + * @channel: bus ID of the channel to test + * @device: bus ID of the DMA Engine to test + * @threads_per_chan: number of threads to start per channel + * @max_channels: maximum number of channels to use + * @iterations: iterations before stopping test + * @xor_sources: number of xor source buffers + * @pq_sources: number of p+q source buffers + * @timeout: transfer timeout in msec, -1 for infinite timeout */ -static LIST_HEAD(dmatest_channels); -static unsigned int nr_channels; +struct dmatest_params { + unsigned int buf_size; + char channel[20]; + char device[20]; + unsigned int threads_per_chan; + unsigned int max_channels; + unsigned int iterations; + unsigned int xor_sources; + unsigned int pq_sources; + int timeout; +}; -static bool dmatest_match_channel(struct dma_chan *chan) +/** + * struct dmatest_info - test information. + * @params: test parameters + * @lock: access protection to the fields of this structure + */ +struct dmatest_info { + /* Test parameters */ + struct dmatest_params params; + + /* Internal state */ + struct list_head channels; + unsigned int nr_channels; + struct mutex lock; + + /* debugfs related stuff */ + struct dentry *root; + struct dmatest_params dbgfs_params; + + /* Test results */ + struct list_head results; + struct mutex results_lock; +}; + +static struct dmatest_info test_info; + +static bool dmatest_match_channel(struct dmatest_params *params, + struct dma_chan *chan) { - if (test_channel[0] == '\0') + if (params->channel[0] == '\0') return true; - return strcmp(dma_chan_name(chan), test_channel) == 0; + return strcmp(dma_chan_name(chan), params->channel) == 0; } -static bool dmatest_match_device(struct dma_device *device) +static bool dmatest_match_device(struct dmatest_params *params, + struct dma_device *device) { - if (test_device[0] == '\0') + if (params->device[0] == '\0') return true; - return strcmp(dev_name(device->dev), test_device) == 0; + return strcmp(dev_name(device->dev), params->device) == 0; } static unsigned long dmatest_random(void) @@ -122,7 +226,8 @@ static unsigned long dmatest_random(void) return buf; } -static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len) +static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len, + unsigned int buf_size) { unsigned int i; u8 *buf; @@ -133,13 +238,14 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len) for ( ; i < start + len; i++) buf[i] = PATTERN_SRC | PATTERN_COPY | (~i & PATTERN_COUNT_MASK); - for ( ; i < test_buf_size; i++) + for ( ; i < buf_size; i++) buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK); buf++; } } -static void dmatest_init_dsts(u8 **bufs, unsigned int start, unsigned int len) +static void dmatest_init_dsts(u8 **bufs, unsigned int start, unsigned int len, + unsigned int buf_size) { unsigned int i; u8 *buf; @@ -150,40 +256,14 @@ static void dmatest_init_dsts(u8 **bufs, unsigned int start, unsigned int len) for ( ; i < start + len; i++) buf[i] = PATTERN_DST | PATTERN_OVERWRITE | (~i & PATTERN_COUNT_MASK); - for ( ; i < test_buf_size; i++) + for ( ; i < buf_size; i++) buf[i] = PATTERN_DST | (~i & PATTERN_COUNT_MASK); } } -static void dmatest_mismatch(u8 actual, u8 pattern, unsigned int index, - unsigned int counter, bool is_srcbuf) -{ - u8 diff = actual ^ pattern; - u8 expected = pattern | (~counter & PATTERN_COUNT_MASK); - const char *thread_name = current->comm; - - if (is_srcbuf) - pr_warning("%s: srcbuf[0x%x] overwritten!" - " Expected %02x, got %02x\n", - thread_name, index, expected, actual); - else if ((pattern & PATTERN_COPY) - && (diff & (PATTERN_COPY | PATTERN_OVERWRITE))) - pr_warning("%s: dstbuf[0x%x] not copied!" - " Expected %02x, got %02x\n", - thread_name, index, expected, actual); - else if (diff & PATTERN_SRC) - pr_warning("%s: dstbuf[0x%x] was copied!" - " Expected %02x, got %02x\n", - thread_name, index, expected, actual); - else - pr_warning("%s: dstbuf[0x%x] mismatch!" - " Expected %02x, got %02x\n", - thread_name, index, expected, actual); -} - -static unsigned int dmatest_verify(u8 **bufs, unsigned int start, - unsigned int end, unsigned int counter, u8 pattern, - bool is_srcbuf) +static unsigned int dmatest_verify(struct dmatest_verify_result *vr, u8 **bufs, + unsigned int start, unsigned int end, unsigned int counter, + u8 pattern, bool is_srcbuf) { unsigned int i; unsigned int error_count = 0; @@ -191,6 +271,7 @@ static unsigned int dmatest_verify(u8 **bufs, unsigned int start, u8 expected; u8 *buf; unsigned int counter_orig = counter; + struct dmatest_verify_buffer *vb; for (; (buf = *bufs); bufs++) { counter = counter_orig; @@ -198,18 +279,21 @@ static unsigned int dmatest_verify(u8 **bufs, unsigned int start, actual = buf[i]; expected = pattern | (~counter & PATTERN_COUNT_MASK); if (actual != expected) { - if (error_count < 32) - dmatest_mismatch(actual, pattern, i, - counter, is_srcbuf); + if (error_count < MAX_ERROR_COUNT && vr) { + vb = &vr->data[error_count]; + vb->index = i; + vb->expected = expected; + vb->actual = actual; + } error_count++; } counter++; } } - if (error_count > 32) + if (error_count > MAX_ERROR_COUNT) pr_warning("%s: %u errors suppressed\n", - current->comm, error_count - 32); + current->comm, error_count - MAX_ERROR_COUNT); return error_count; } @@ -249,6 +333,170 @@ static unsigned int min_odd(unsigned int x, unsigned int y) return val % 2 ? val : val - 1; } +static char *verify_result_get_one(struct dmatest_verify_result *vr, + unsigned int i) +{ + struct dmatest_verify_buffer *vb = &vr->data[i]; + u8 diff = vb->actual ^ vr->pattern; + static char buf[512]; + char *msg; + + if (vr->is_srcbuf) + msg = "srcbuf overwritten!"; + else if ((vr->pattern & PATTERN_COPY) + && (diff & (PATTERN_COPY | PATTERN_OVERWRITE))) + msg = "dstbuf not copied!"; + else if (diff & PATTERN_SRC) + msg = "dstbuf was copied!"; + else + msg = "dstbuf mismatch!"; + + snprintf(buf, sizeof(buf) - 1, "%s [0x%x] Expected %02x, got %02x", msg, + vb->index, vb->expected, vb->actual); + + return buf; +} + +static char *thread_result_get(const char *name, + struct dmatest_thread_result *tr) +{ + static const char * const messages[] = { + [DMATEST_ET_OK] = "No errors", + [DMATEST_ET_MAP_SRC] = "src mapping error", + [DMATEST_ET_MAP_DST] = "dst mapping error", + [DMATEST_ET_PREP] = "prep error", + [DMATEST_ET_SUBMIT] = "submit error", + [DMATEST_ET_TIMEOUT] = "test timed out", + [DMATEST_ET_DMA_ERROR] = + "got completion callback (DMA_ERROR)", + [DMATEST_ET_DMA_IN_PROGRESS] = + "got completion callback (DMA_IN_PROGRESS)", + [DMATEST_ET_VERIFY] = "errors", + [DMATEST_ET_VERIFY_BUF] = "verify errors", + }; + static char buf[512]; + + snprintf(buf, sizeof(buf) - 1, + "%s: #%u: %s with src_off=0x%x ""dst_off=0x%x len=0x%x (%lu)", + name, tr->n, messages[tr->type], tr->src_off, tr->dst_off, + tr->len, tr->data); + + return buf; +} + +static int thread_result_add(struct dmatest_info *info, + struct dmatest_result *r, enum dmatest_error_type type, + unsigned int n, unsigned int src_off, unsigned int dst_off, + unsigned int len, unsigned long data) +{ + struct dmatest_thread_result *tr; + + tr = kzalloc(sizeof(*tr), GFP_KERNEL); + if (!tr) + return -ENOMEM; + + tr->type = type; + tr->n = n; + tr->src_off = src_off; + tr->dst_off = dst_off; + tr->len = len; + tr->data = data; + + mutex_lock(&info->results_lock); + list_add_tail(&tr->node, &r->results); + mutex_unlock(&info->results_lock); + + pr_warn("%s\n", thread_result_get(r->name, tr)); + return 0; +} + +static unsigned int verify_result_add(struct dmatest_info *info, + struct dmatest_result *r, unsigned int n, + unsigned int src_off, unsigned int dst_off, unsigned int len, + u8 **bufs, int whence, unsigned int counter, u8 pattern, + bool is_srcbuf) +{ + struct dmatest_verify_result *vr; + unsigned int error_count; + unsigned int buf_off = is_srcbuf ? src_off : dst_off; + unsigned int start, end; + + if (whence < 0) { + start = 0; + end = buf_off; + } else if (whence > 0) { + start = buf_off + len; + end = info->params.buf_size; + } else { + start = buf_off; + end = buf_off + len; + } + + vr = kmalloc(sizeof(*vr), GFP_KERNEL); + if (!vr) { + pr_warn("dmatest: No memory to store verify result\n"); + return dmatest_verify(NULL, bufs, start, end, counter, pattern, + is_srcbuf); + } + + vr->pattern = pattern; + vr->is_srcbuf = is_srcbuf; + + error_count = dmatest_verify(vr, bufs, start, end, counter, pattern, + is_srcbuf); + if (error_count) { + vr->error_count = error_count; + thread_result_add(info, r, DMATEST_ET_VERIFY_BUF, n, src_off, + dst_off, len, (unsigned long)vr); + return error_count; + } + + kfree(vr); + return 0; +} + +static void result_free(struct dmatest_info *info, const char *name) +{ + struct dmatest_result *r, *_r; + + mutex_lock(&info->results_lock); + list_for_each_entry_safe(r, _r, &info->results, node) { + struct dmatest_thread_result *tr, *_tr; + + if (name && strcmp(r->name, name)) + continue; + + list_for_each_entry_safe(tr, _tr, &r->results, node) { + if (tr->type == DMATEST_ET_VERIFY_BUF) + kfree(tr->vr); + list_del(&tr->node); + kfree(tr); + } + + kfree(r->name); + list_del(&r->node); + kfree(r); + } + + mutex_unlock(&info->results_lock); +} + +static struct dmatest_result *result_init(struct dmatest_info *info, + const char *name) +{ + struct dmatest_result *r; + + r = kzalloc(sizeof(*r), GFP_KERNEL); + if (r) { + r->name = kstrdup(name, GFP_KERNEL); + INIT_LIST_HEAD(&r->results); + mutex_lock(&info->results_lock); + list_add_tail(&r->node, &info->results); + mutex_unlock(&info->results_lock); + } + return r; +} + /* * This function repeatedly tests DMA transfers of various lengths and * offsets for a given operation type until it is told to exit by @@ -268,6 +516,8 @@ static int dmatest_func(void *data) DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_wait); struct dmatest_thread *thread = data; struct dmatest_done done = { .wait = &done_wait }; + struct dmatest_info *info; + struct dmatest_params *params; struct dma_chan *chan; struct dma_device *dev; const char *thread_name; @@ -278,11 +528,12 @@ static int dmatest_func(void *data) dma_cookie_t cookie; enum dma_status status; enum dma_ctrl_flags flags; - u8 pq_coefs[pq_sources + 1]; + u8 *pq_coefs = NULL; int ret; int src_cnt; int dst_cnt; int i; + struct dmatest_result *result; thread_name = current->comm; set_freezable(); @@ -290,28 +541,39 @@ static int dmatest_func(void *data) ret = -ENOMEM; smp_rmb(); + info = thread->info; + params = &info->params; chan = thread->chan; dev = chan->device; if (thread->type == DMA_MEMCPY) src_cnt = dst_cnt = 1; else if (thread->type == DMA_XOR) { /* force odd to ensure dst = src */ - src_cnt = min_odd(xor_sources | 1, dev->max_xor); + src_cnt = min_odd(params->xor_sources | 1, dev->max_xor); dst_cnt = 1; } else if (thread->type == DMA_PQ) { /* force odd to ensure dst = src */ - src_cnt = min_odd(pq_sources | 1, dma_maxpq(dev, 0)); + src_cnt = min_odd(params->pq_sources | 1, dma_maxpq(dev, 0)); dst_cnt = 2; + + pq_coefs = kmalloc(params->pq_sources+1, GFP_KERNEL); + if (!pq_coefs) + goto err_thread_type; + for (i = 0; i < src_cnt; i++) pq_coefs[i] = 1; } else + goto err_thread_type; + + result = result_init(info, thread_name); + if (!result) goto err_srcs; thread->srcs = kcalloc(src_cnt+1, sizeof(u8 *), GFP_KERNEL); if (!thread->srcs) goto err_srcs; for (i = 0; i < src_cnt; i++) { - thread->srcs[i] = kmalloc(test_buf_size, GFP_KERNEL); + thread->srcs[i] = kmalloc(params->buf_size, GFP_KERNEL); if (!thread->srcs[i]) goto err_srcbuf; } @@ -321,7 +583,7 @@ static int dmatest_func(void *data) if (!thread->dsts) goto err_dsts; for (i = 0; i < dst_cnt; i++) { - thread->dsts[i] = kmalloc(test_buf_size, GFP_KERNEL); + thread->dsts[i] = kmalloc(params->buf_size, GFP_KERNEL); if (!thread->dsts[i]) goto err_dstbuf; } @@ -337,7 +599,7 @@ static int dmatest_func(void *data) | DMA_COMPL_SKIP_DEST_UNMAP | DMA_COMPL_SRC_UNMAP_SINGLE; while (!kthread_should_stop() - && !(iterations && total_tests >= iterations)) { + && !(params->iterations && total_tests >= params->iterations)) { struct dma_async_tx_descriptor *tx = NULL; dma_addr_t dma_srcs[src_cnt]; dma_addr_t dma_dsts[dst_cnt]; @@ -353,24 +615,24 @@ static int dmatest_func(void *data) else if (thread->type == DMA_PQ) align = dev->pq_align; - if (1 << align > test_buf_size) { + if (1 << align > params->buf_size) { pr_err("%u-byte buffer too small for %d-byte alignment\n", - test_buf_size, 1 << align); + params->buf_size, 1 << align); break; } - len = dmatest_random() % test_buf_size + 1; + len = dmatest_random() % params->buf_size + 1; len = (len >> align) << align; if (!len) len = 1 << align; - src_off = dmatest_random() % (test_buf_size - len + 1); - dst_off = dmatest_random() % (test_buf_size - len + 1); + src_off = dmatest_random() % (params->buf_size - len + 1); + dst_off = dmatest_random() % (params->buf_size - len + 1); src_off = (src_off >> align) << align; dst_off = (dst_off >> align) << align; - dmatest_init_srcs(thread->srcs, src_off, len); - dmatest_init_dsts(thread->dsts, dst_off, len); + dmatest_init_srcs(thread->srcs, src_off, len, params->buf_size); + dmatest_init_dsts(thread->dsts, dst_off, len, params->buf_size); for (i = 0; i < src_cnt; i++) { u8 *buf = thread->srcs[i] + src_off; @@ -380,10 +642,10 @@ static int dmatest_func(void *data) ret = dma_mapping_error(dev->dev, dma_srcs[i]); if (ret) { unmap_src(dev->dev, dma_srcs, len, i); - pr_warn("%s: #%u: mapping error %d with " - "src_off=0x%x len=0x%x\n", - thread_name, total_tests - 1, ret, - src_off, len); + thread_result_add(info, result, + DMATEST_ET_MAP_SRC, + total_tests, src_off, dst_off, + len, ret); failed_tests++; continue; } @@ -391,16 +653,17 @@ static int dmatest_func(void *data) /* map with DMA_BIDIRECTIONAL to force writeback/invalidate */ for (i = 0; i < dst_cnt; i++) { dma_dsts[i] = dma_map_single(dev->dev, thread->dsts[i], - test_buf_size, + params->buf_size, DMA_BIDIRECTIONAL); ret = dma_mapping_error(dev->dev, dma_dsts[i]); if (ret) { unmap_src(dev->dev, dma_srcs, len, src_cnt); - unmap_dst(dev->dev, dma_dsts, test_buf_size, i); - pr_warn("%s: #%u: mapping error %d with " - "dst_off=0x%x len=0x%x\n", - thread_name, total_tests - 1, ret, - dst_off, test_buf_size); + unmap_dst(dev->dev, dma_dsts, params->buf_size, + i); + thread_result_add(info, result, + DMATEST_ET_MAP_DST, + total_tests, src_off, dst_off, + len, ret); failed_tests++; continue; } @@ -428,11 +691,11 @@ static int dmatest_func(void *data) if (!tx) { unmap_src(dev->dev, dma_srcs, len, src_cnt); - unmap_dst(dev->dev, dma_dsts, test_buf_size, dst_cnt); - pr_warning("%s: #%u: prep error with src_off=0x%x " - "dst_off=0x%x len=0x%x\n", - thread_name, total_tests - 1, - src_off, dst_off, len); + unmap_dst(dev->dev, dma_dsts, params->buf_size, + dst_cnt); + thread_result_add(info, result, DMATEST_ET_PREP, + total_tests, src_off, dst_off, + len, 0); msleep(100); failed_tests++; continue; @@ -444,18 +707,18 @@ static int dmatest_func(void *data) cookie = tx->tx_submit(tx); if (dma_submit_error(cookie)) { - pr_warning("%s: #%u: submit error %d with src_off=0x%x " - "dst_off=0x%x len=0x%x\n", - thread_name, total_tests - 1, cookie, - src_off, dst_off, len); + thread_result_add(info, result, DMATEST_ET_SUBMIT, + total_tests, src_off, dst_off, + len, cookie); msleep(100); failed_tests++; continue; } dma_async_issue_pending(chan); - wait_event_freezable_timeout(done_wait, done.done, - msecs_to_jiffies(timeout)); + wait_event_freezable_timeout(done_wait, + done.done || kthread_should_stop(), + msecs_to_jiffies(params->timeout)); status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); @@ -468,56 +731,57 @@ static int dmatest_func(void *data) * free it this time?" dancing. For now, just * leave it dangling. */ - pr_warning("%s: #%u: test timed out\n", - thread_name, total_tests - 1); + thread_result_add(info, result, DMATEST_ET_TIMEOUT, + total_tests, src_off, dst_off, + len, 0); failed_tests++; continue; } else if (status != DMA_SUCCESS) { - pr_warning("%s: #%u: got completion callback," - " but status is \'%s\'\n", - thread_name, total_tests - 1, - status == DMA_ERROR ? "error" : "in progress"); + enum dmatest_error_type type = (status == DMA_ERROR) ? + DMATEST_ET_DMA_ERROR : DMATEST_ET_DMA_IN_PROGRESS; + thread_result_add(info, result, type, + total_tests, src_off, dst_off, + len, status); failed_tests++; continue; } /* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */ - unmap_dst(dev->dev, dma_dsts, test_buf_size, dst_cnt); + unmap_dst(dev->dev, dma_dsts, params->buf_size, dst_cnt); error_count = 0; pr_debug("%s: verifying source buffer...\n", thread_name); - error_count += dmatest_verify(thread->srcs, 0, src_off, + error_count += verify_result_add(info, result, total_tests, + src_off, dst_off, len, thread->srcs, -1, 0, PATTERN_SRC, true); - error_count += dmatest_verify(thread->srcs, src_off, - src_off + len, src_off, - PATTERN_SRC | PATTERN_COPY, true); - error_count += dmatest_verify(thread->srcs, src_off + len, - test_buf_size, src_off + len, - PATTERN_SRC, true); - - pr_debug("%s: verifying dest buffer...\n", - thread->task->comm); - error_count += dmatest_verify(thread->dsts, 0, dst_off, + error_count += verify_result_add(info, result, total_tests, + src_off, dst_off, len, thread->srcs, 0, + src_off, PATTERN_SRC | PATTERN_COPY, true); + error_count += verify_result_add(info, result, total_tests, + src_off, dst_off, len, thread->srcs, 1, + src_off + len, PATTERN_SRC, true); + + pr_debug("%s: verifying dest buffer...\n", thread_name); + error_count += verify_result_add(info, result, total_tests, + src_off, dst_off, len, thread->dsts, -1, 0, PATTERN_DST, false); - error_count += dmatest_verify(thread->dsts, dst_off, - dst_off + len, src_off, - PATTERN_SRC | PATTERN_COPY, false); - error_count += dmatest_verify(thread->dsts, dst_off + len, - test_buf_size, dst_off + len, - PATTERN_DST, false); + error_count += verify_result_add(info, result, total_tests, + src_off, dst_off, len, thread->dsts, 0, + src_off, PATTERN_SRC | PATTERN_COPY, false); + error_count += verify_result_add(info, result, total_tests, + src_off, dst_off, len, thread->dsts, 1, + dst_off + len, PATTERN_DST, false); if (error_count) { - pr_warning("%s: #%u: %u errors with " - "src_off=0x%x dst_off=0x%x len=0x%x\n", - thread_name, total_tests - 1, error_count, - src_off, dst_off, len); + thread_result_add(info, result, DMATEST_ET_VERIFY, + total_tests, src_off, dst_off, + len, error_count); failed_tests++; } else { - pr_debug("%s: #%u: No errors with " - "src_off=0x%x dst_off=0x%x len=0x%x\n", - thread_name, total_tests - 1, - src_off, dst_off, len); + thread_result_add(info, result, DMATEST_ET_OK, + total_tests, src_off, dst_off, + len, 0); } } @@ -532,6 +796,8 @@ err_dsts: err_srcbuf: kfree(thread->srcs); err_srcs: + kfree(pq_coefs); +err_thread_type: pr_notice("%s: terminating after %u tests, %u failures (status %d)\n", thread_name, total_tests, failed_tests, ret); @@ -539,7 +805,9 @@ err_srcs: if (ret) dmaengine_terminate_all(chan); - if (iterations > 0) + thread->done = true; + + if (params->iterations > 0) while (!kthread_should_stop()) { DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit); interruptible_sleep_on(&wait_dmatest_exit); @@ -568,8 +836,10 @@ static void dmatest_cleanup_channel(struct dmatest_chan *dtc) kfree(dtc); } -static int dmatest_add_threads(struct dmatest_chan *dtc, enum dma_transaction_type type) +static int dmatest_add_threads(struct dmatest_info *info, + struct dmatest_chan *dtc, enum dma_transaction_type type) { + struct dmatest_params *params = &info->params; struct dmatest_thread *thread; struct dma_chan *chan = dtc->chan; char *op; @@ -584,7 +854,7 @@ static int dmatest_add_threads(struct dmatest_chan *dtc, enum dma_transaction_ty else return -EINVAL; - for (i = 0; i < threads_per_chan; i++) { + for (i = 0; i < params->threads_per_chan; i++) { thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL); if (!thread) { pr_warning("dmatest: No memory for %s-%s%u\n", @@ -592,6 +862,7 @@ static int dmatest_add_threads(struct dmatest_chan *dtc, enum dma_transaction_ty break; } + thread->info = info; thread->chan = dtc->chan; thread->type = type; smp_wmb(); @@ -612,7 +883,8 @@ static int dmatest_add_threads(struct dmatest_chan *dtc, enum dma_transaction_ty return i; } -static int dmatest_add_channel(struct dma_chan *chan) +static int dmatest_add_channel(struct dmatest_info *info, + struct dma_chan *chan) { struct dmatest_chan *dtc; struct dma_device *dma_dev = chan->device; @@ -629,75 +901,418 @@ static int dmatest_add_channel(struct dma_chan *chan) INIT_LIST_HEAD(&dtc->threads); if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) { - cnt = dmatest_add_threads(dtc, DMA_MEMCPY); + cnt = dmatest_add_threads(info, dtc, DMA_MEMCPY); thread_count += cnt > 0 ? cnt : 0; } if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) { - cnt = dmatest_add_threads(dtc, DMA_XOR); + cnt = dmatest_add_threads(info, dtc, DMA_XOR); thread_count += cnt > 0 ? cnt : 0; } if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) { - cnt = dmatest_add_threads(dtc, DMA_PQ); + cnt = dmatest_add_threads(info, dtc, DMA_PQ); thread_count += cnt > 0 ? cnt : 0; } pr_info("dmatest: Started %u threads using %s\n", thread_count, dma_chan_name(chan)); - list_add_tail(&dtc->node, &dmatest_channels); - nr_channels++; + list_add_tail(&dtc->node, &info->channels); + info->nr_channels++; return 0; } static bool filter(struct dma_chan *chan, void *param) { - if (!dmatest_match_channel(chan) || !dmatest_match_device(chan->device)) + struct dmatest_params *params = param; + + if (!dmatest_match_channel(params, chan) || + !dmatest_match_device(params, chan->device)) return false; else return true; } -static int __init dmatest_init(void) +static int __run_threaded_test(struct dmatest_info *info) { dma_cap_mask_t mask; struct dma_chan *chan; + struct dmatest_params *params = &info->params; int err = 0; dma_cap_zero(mask); dma_cap_set(DMA_MEMCPY, mask); for (;;) { - chan = dma_request_channel(mask, filter, NULL); + chan = dma_request_channel(mask, filter, params); if (chan) { - err = dmatest_add_channel(chan); + err = dmatest_add_channel(info, chan); if (err) { dma_release_channel(chan); break; /* add_channel failed, punt */ } } else break; /* no more channels available */ - if (max_channels && nr_channels >= max_channels) + if (params->max_channels && + info->nr_channels >= params->max_channels) break; /* we have all we need */ } - return err; } -/* when compiled-in wait for drivers to load first */ -late_initcall(dmatest_init); -static void __exit dmatest_exit(void) +#ifndef MODULE +static int run_threaded_test(struct dmatest_info *info) +{ + int ret; + + mutex_lock(&info->lock); + ret = __run_threaded_test(info); + mutex_unlock(&info->lock); + return ret; +} +#endif + +static void __stop_threaded_test(struct dmatest_info *info) { struct dmatest_chan *dtc, *_dtc; struct dma_chan *chan; - list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) { + list_for_each_entry_safe(dtc, _dtc, &info->channels, node) { list_del(&dtc->node); chan = dtc->chan; dmatest_cleanup_channel(dtc); - pr_debug("dmatest: dropped channel %s\n", - dma_chan_name(chan)); + pr_debug("dmatest: dropped channel %s\n", dma_chan_name(chan)); dma_release_channel(chan); } + + info->nr_channels = 0; +} + +static void stop_threaded_test(struct dmatest_info *info) +{ + mutex_lock(&info->lock); + __stop_threaded_test(info); + mutex_unlock(&info->lock); +} + +static int __restart_threaded_test(struct dmatest_info *info, bool run) +{ + struct dmatest_params *params = &info->params; + int ret; + + /* Stop any running test first */ + __stop_threaded_test(info); + + if (run == false) + return 0; + + /* Clear results from previous run */ + result_free(info, NULL); + + /* Copy test parameters */ + memcpy(params, &info->dbgfs_params, sizeof(*params)); + + /* Run test with new parameters */ + ret = __run_threaded_test(info); + if (ret) { + __stop_threaded_test(info); + pr_err("dmatest: Can't run test\n"); + } + + return ret; +} + +static ssize_t dtf_write_string(void *to, size_t available, loff_t *ppos, + const void __user *from, size_t count) +{ + char tmp[20]; + ssize_t len; + + len = simple_write_to_buffer(tmp, sizeof(tmp) - 1, ppos, from, count); + if (len >= 0) { + tmp[len] = '\0'; + strlcpy(to, strim(tmp), available); + } + + return len; +} + +static ssize_t dtf_read_channel(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct dmatest_info *info = file->private_data; + return simple_read_from_buffer(buf, count, ppos, + info->dbgfs_params.channel, + strlen(info->dbgfs_params.channel)); +} + +static ssize_t dtf_write_channel(struct file *file, const char __user *buf, + size_t size, loff_t *ppos) +{ + struct dmatest_info *info = file->private_data; + return dtf_write_string(info->dbgfs_params.channel, + sizeof(info->dbgfs_params.channel), + ppos, buf, size); +} + +static const struct file_operations dtf_channel_fops = { + .read = dtf_read_channel, + .write = dtf_write_channel, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t dtf_read_device(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct dmatest_info *info = file->private_data; + return simple_read_from_buffer(buf, count, ppos, + info->dbgfs_params.device, + strlen(info->dbgfs_params.device)); +} + +static ssize_t dtf_write_device(struct file *file, const char __user *buf, + size_t size, loff_t *ppos) +{ + struct dmatest_info *info = file->private_data; + return dtf_write_string(info->dbgfs_params.device, + sizeof(info->dbgfs_params.device), + ppos, buf, size); +} + +static const struct file_operations dtf_device_fops = { + .read = dtf_read_device, + .write = dtf_write_device, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t dtf_read_run(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct dmatest_info *info = file->private_data; + char buf[3]; + struct dmatest_chan *dtc; + bool alive = false; + + mutex_lock(&info->lock); + list_for_each_entry(dtc, &info->channels, node) { + struct dmatest_thread *thread; + + list_for_each_entry(thread, &dtc->threads, node) { + if (!thread->done) { + alive = true; + break; + } + } + } + + if (alive) { + buf[0] = 'Y'; + } else { + __stop_threaded_test(info); + buf[0] = 'N'; + } + + mutex_unlock(&info->lock); + buf[1] = '\n'; + buf[2] = 0x00; + return simple_read_from_buffer(user_buf, count, ppos, buf, 2); +} + +static ssize_t dtf_write_run(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct dmatest_info *info = file->private_data; + char buf[16]; + bool bv; + int ret = 0; + + if (copy_from_user(buf, user_buf, min(count, (sizeof(buf) - 1)))) + return -EFAULT; + + if (strtobool(buf, &bv) == 0) { + mutex_lock(&info->lock); + ret = __restart_threaded_test(info, bv); + mutex_unlock(&info->lock); + } + + return ret ? ret : count; +} + +static const struct file_operations dtf_run_fops = { + .read = dtf_read_run, + .write = dtf_write_run, + .open = simple_open, + .llseek = default_llseek, +}; + +static int dtf_results_show(struct seq_file *sf, void *data) +{ + struct dmatest_info *info = sf->private; + struct dmatest_result *result; + struct dmatest_thread_result *tr; + unsigned int i; + + mutex_lock(&info->results_lock); + list_for_each_entry(result, &info->results, node) { + list_for_each_entry(tr, &result->results, node) { + seq_printf(sf, "%s\n", + thread_result_get(result->name, tr)); + if (tr->type == DMATEST_ET_VERIFY_BUF) { + for (i = 0; i < tr->vr->error_count; i++) { + seq_printf(sf, "\t%s\n", + verify_result_get_one(tr->vr, i)); + } + } + } + } + + mutex_unlock(&info->results_lock); + return 0; +} + +static int dtf_results_open(struct inode *inode, struct file *file) +{ + return single_open(file, dtf_results_show, inode->i_private); +} + +static const struct file_operations dtf_results_fops = { + .open = dtf_results_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int dmatest_register_dbgfs(struct dmatest_info *info) +{ + struct dentry *d; + struct dmatest_params *params = &info->dbgfs_params; + int ret = -ENOMEM; + + d = debugfs_create_dir("dmatest", NULL); + if (IS_ERR(d)) + return PTR_ERR(d); + if (!d) + goto err_root; + + info->root = d; + + /* Copy initial values */ + memcpy(params, &info->params, sizeof(*params)); + + /* Test parameters */ + + d = debugfs_create_u32("test_buf_size", S_IWUSR | S_IRUGO, info->root, + (u32 *)¶ms->buf_size); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_file("channel", S_IRUGO | S_IWUSR, info->root, + info, &dtf_channel_fops); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_file("device", S_IRUGO | S_IWUSR, info->root, + info, &dtf_device_fops); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_u32("threads_per_chan", S_IWUSR | S_IRUGO, info->root, + (u32 *)¶ms->threads_per_chan); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_u32("max_channels", S_IWUSR | S_IRUGO, info->root, + (u32 *)¶ms->max_channels); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_u32("iterations", S_IWUSR | S_IRUGO, info->root, + (u32 *)¶ms->iterations); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_u32("xor_sources", S_IWUSR | S_IRUGO, info->root, + (u32 *)¶ms->xor_sources); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_u32("pq_sources", S_IWUSR | S_IRUGO, info->root, + (u32 *)¶ms->pq_sources); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + d = debugfs_create_u32("timeout", S_IWUSR | S_IRUGO, info->root, + (u32 *)¶ms->timeout); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + /* Run or stop threaded test */ + d = debugfs_create_file("run", S_IWUSR | S_IRUGO, info->root, + info, &dtf_run_fops); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + /* Results of test in progress */ + d = debugfs_create_file("results", S_IRUGO, info->root, info, + &dtf_results_fops); + if (IS_ERR_OR_NULL(d)) + goto err_node; + + return 0; + +err_node: + debugfs_remove_recursive(info->root); +err_root: + pr_err("dmatest: Failed to initialize debugfs\n"); + return ret; +} + +static int __init dmatest_init(void) +{ + struct dmatest_info *info = &test_info; + struct dmatest_params *params = &info->params; + int ret; + + memset(info, 0, sizeof(*info)); + + mutex_init(&info->lock); + INIT_LIST_HEAD(&info->channels); + + mutex_init(&info->results_lock); + INIT_LIST_HEAD(&info->results); + + /* Set default parameters */ + params->buf_size = test_buf_size; + strlcpy(params->channel, test_channel, sizeof(params->channel)); + strlcpy(params->device, test_device, sizeof(params->device)); + params->threads_per_chan = threads_per_chan; + params->max_channels = max_channels; + params->iterations = iterations; + params->xor_sources = xor_sources; + params->pq_sources = pq_sources; + params->timeout = timeout; + + ret = dmatest_register_dbgfs(info); + if (ret) + return ret; + +#ifdef MODULE + return 0; +#else + return run_threaded_test(info); +#endif +} +/* when compiled-in wait for drivers to load first */ +late_initcall(dmatest_init); + +static void __exit dmatest_exit(void) +{ + struct dmatest_info *info = &test_info; + + debugfs_remove_recursive(info->root); + stop_threaded_test(info); + result_free(info, NULL); } module_exit(dmatest_exit); diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 43a5329..2e5deaa 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -25,6 +25,8 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/acpi_dma.h> #include "dw_dmac_regs.h" #include "dmaengine.h" @@ -49,29 +51,22 @@ static inline unsigned int dwc_get_sms(struct dw_dma_slave *slave) return slave ? slave->src_master : 1; } -#define SRC_MASTER 0 -#define DST_MASTER 1 - -static inline unsigned int dwc_get_master(struct dma_chan *chan, int master) +static inline void dwc_set_masters(struct dw_dma_chan *dwc) { - struct dw_dma *dw = to_dw_dma(chan->device); - struct dw_dma_slave *dws = chan->private; - unsigned int m; - - if (master == SRC_MASTER) - m = dwc_get_sms(dws); - else - m = dwc_get_dms(dws); + struct dw_dma *dw = to_dw_dma(dwc->chan.device); + struct dw_dma_slave *dws = dwc->chan.private; + unsigned char mmax = dw->nr_masters - 1; - return min_t(unsigned int, dw->nr_masters - 1, m); + if (dwc->request_line == ~0) { + dwc->src_master = min_t(unsigned char, mmax, dwc_get_sms(dws)); + dwc->dst_master = min_t(unsigned char, mmax, dwc_get_dms(dws)); + } } #define DWC_DEFAULT_CTLLO(_chan) ({ \ struct dw_dma_chan *_dwc = to_dw_dma_chan(_chan); \ struct dma_slave_config *_sconfig = &_dwc->dma_sconfig; \ bool _is_slave = is_slave_direction(_dwc->direction); \ - int _dms = dwc_get_master(_chan, DST_MASTER); \ - int _sms = dwc_get_master(_chan, SRC_MASTER); \ u8 _smsize = _is_slave ? _sconfig->src_maxburst : \ DW_DMA_MSIZE_16; \ u8 _dmsize = _is_slave ? _sconfig->dst_maxburst : \ @@ -81,8 +76,8 @@ static inline unsigned int dwc_get_master(struct dma_chan *chan, int master) | DWC_CTLL_SRC_MSIZE(_smsize) \ | DWC_CTLL_LLP_D_EN \ | DWC_CTLL_LLP_S_EN \ - | DWC_CTLL_DMS(_dms) \ - | DWC_CTLL_SMS(_sms)); \ + | DWC_CTLL_DMS(_dwc->dst_master) \ + | DWC_CTLL_SMS(_dwc->src_master)); \ }) /* @@ -92,13 +87,6 @@ static inline unsigned int dwc_get_master(struct dma_chan *chan, int master) */ #define NR_DESCS_PER_CHANNEL 64 -static inline unsigned int dwc_get_data_width(struct dma_chan *chan, int master) -{ - struct dw_dma *dw = to_dw_dma(chan->device); - - return dw->data_width[dwc_get_master(chan, master)]; -} - /*----------------------------------------------------------------------*/ static struct device *chan2dev(struct dma_chan *chan) @@ -172,13 +160,7 @@ static void dwc_initialize(struct dw_dma_chan *dwc) if (dwc->initialized == true) return; - if (dws && dws->cfg_hi == ~0 && dws->cfg_lo == ~0) { - /* autoconfigure based on request line from DT */ - if (dwc->direction == DMA_MEM_TO_DEV) - cfghi = DWC_CFGH_DST_PER(dwc->request_line); - else if (dwc->direction == DMA_DEV_TO_MEM) - cfghi = DWC_CFGH_SRC_PER(dwc->request_line); - } else if (dws) { + if (dws) { /* * We need controller-specific data to set up slave * transfers. @@ -189,9 +171,9 @@ static void dwc_initialize(struct dw_dma_chan *dwc) cfglo |= dws->cfg_lo & ~DWC_CFGL_CH_PRIOR_MASK; } else { if (dwc->direction == DMA_MEM_TO_DEV) - cfghi = DWC_CFGH_DST_PER(dwc->dma_sconfig.slave_id); + cfghi = DWC_CFGH_DST_PER(dwc->request_line); else if (dwc->direction == DMA_DEV_TO_MEM) - cfghi = DWC_CFGH_SRC_PER(dwc->dma_sconfig.slave_id); + cfghi = DWC_CFGH_SRC_PER(dwc->request_line); } channel_writel(dwc, CFG_LO, cfglo); @@ -473,16 +455,16 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) (unsigned long long)llp); list_for_each_entry_safe(desc, _desc, &dwc->active_list, desc_node) { - /* initial residue value */ + /* Initial residue value */ dwc->residue = desc->total_len; - /* check first descriptors addr */ + /* Check first descriptors addr */ if (desc->txd.phys == llp) { spin_unlock_irqrestore(&dwc->lock, flags); return; } - /* check first descriptors llp */ + /* Check first descriptors llp */ if (desc->lli.llp == llp) { /* This one is currently in progress */ dwc->residue -= dwc_get_sent(dwc); @@ -588,7 +570,7 @@ inline dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan) } EXPORT_SYMBOL(dw_dma_get_dst_addr); -/* called with dwc->lock held and all DMAC interrupts disabled */ +/* Called with dwc->lock held and all DMAC interrupts disabled */ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, u32 status_err, u32 status_xfer) { @@ -626,7 +608,7 @@ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, dwc_chan_disable(dw, dwc); - /* make sure DMA does not restart by loading a new list */ + /* Make sure DMA does not restart by loading a new list */ channel_writel(dwc, LLP, 0); channel_writel(dwc, CTL_LO, 0); channel_writel(dwc, CTL_HI, 0); @@ -745,6 +727,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, size_t len, unsigned long flags) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); + struct dw_dma *dw = to_dw_dma(chan->device); struct dw_desc *desc; struct dw_desc *first; struct dw_desc *prev; @@ -767,8 +750,8 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, dwc->direction = DMA_MEM_TO_MEM; - data_width = min_t(unsigned int, dwc_get_data_width(chan, SRC_MASTER), - dwc_get_data_width(chan, DST_MASTER)); + data_width = min_t(unsigned int, dw->data_width[dwc->src_master], + dw->data_width[dwc->dst_master]); src_width = dst_width = min_t(unsigned int, data_width, dwc_fast_fls(src | dest | len)); @@ -826,6 +809,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned long flags, void *context) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); + struct dw_dma *dw = to_dw_dma(chan->device); struct dma_slave_config *sconfig = &dwc->dma_sconfig; struct dw_desc *prev; struct dw_desc *first; @@ -859,7 +843,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_M2P) : DWC_CTLL_FC(DW_DMA_FC_D_M2P); - data_width = dwc_get_data_width(chan, SRC_MASTER); + data_width = dw->data_width[dwc->src_master]; for_each_sg(sgl, sg, sg_len, i) { struct dw_desc *desc; @@ -919,7 +903,7 @@ slave_sg_todev_fill_desc: ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_P2M) : DWC_CTLL_FC(DW_DMA_FC_D_P2M); - data_width = dwc_get_data_width(chan, DST_MASTER); + data_width = dw->data_width[dwc->dst_master]; for_each_sg(sgl, sg, sg_len, i) { struct dw_desc *desc; @@ -1001,13 +985,6 @@ static inline void convert_burst(u32 *maxburst) *maxburst = 0; } -static inline void convert_slave_id(struct dw_dma_chan *dwc) -{ - struct dw_dma *dw = to_dw_dma(dwc->chan.device); - - dwc->dma_sconfig.slave_id -= dw->request_line_base; -} - static int set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig) { @@ -1020,9 +997,12 @@ set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig) memcpy(&dwc->dma_sconfig, sconfig, sizeof(*sconfig)); dwc->direction = sconfig->direction; + /* Take the request line from slave_id member */ + if (dwc->request_line == ~0) + dwc->request_line = sconfig->slave_id; + convert_burst(&dwc->dma_sconfig.src_maxburst); convert_burst(&dwc->dma_sconfig.dst_maxburst); - convert_slave_id(dwc); return 0; } @@ -1030,10 +1010,11 @@ set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig) static inline void dwc_chan_pause(struct dw_dma_chan *dwc) { u32 cfglo = channel_readl(dwc, CFG_LO); + unsigned int count = 20; /* timeout iterations */ channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP); - while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY)) - cpu_relax(); + while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY) && count--) + udelay(2); dwc->paused = true; } @@ -1169,6 +1150,8 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) * doesn't mean what you think it means), and status writeback. */ + dwc_set_masters(dwc); + spin_lock_irqsave(&dwc->lock, flags); i = dwc->descs_allocated; while (dwc->descs_allocated < NR_DESCS_PER_CHANNEL) { @@ -1226,6 +1209,7 @@ static void dwc_free_chan_resources(struct dma_chan *chan) list_splice_init(&dwc->free_list, &list); dwc->descs_allocated = 0; dwc->initialized = false; + dwc->request_line = ~0; /* Disable interrupts */ channel_clear_bit(dw, MASK.XFER, dwc->mask); @@ -1241,42 +1225,36 @@ static void dwc_free_chan_resources(struct dma_chan *chan) dev_vdbg(chan2dev(chan), "%s: done\n", __func__); } -struct dw_dma_filter_args { +/*----------------------------------------------------------------------*/ + +struct dw_dma_of_filter_args { struct dw_dma *dw; unsigned int req; unsigned int src; unsigned int dst; }; -static bool dw_dma_generic_filter(struct dma_chan *chan, void *param) +static bool dw_dma_of_filter(struct dma_chan *chan, void *param) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma *dw = to_dw_dma(chan->device); - struct dw_dma_filter_args *fargs = param; - struct dw_dma_slave *dws = &dwc->slave; + struct dw_dma_of_filter_args *fargs = param; - /* ensure the device matches our channel */ + /* Ensure the device matches our channel */ if (chan->device != &fargs->dw->dma) return false; - dws->dma_dev = dw->dma.dev; - dws->cfg_hi = ~0; - dws->cfg_lo = ~0; - dws->src_master = fargs->src; - dws->dst_master = fargs->dst; - dwc->request_line = fargs->req; - - chan->private = dws; + dwc->src_master = fargs->src; + dwc->dst_master = fargs->dst; return true; } -static struct dma_chan *dw_dma_xlate(struct of_phandle_args *dma_spec, - struct of_dma *ofdma) +static struct dma_chan *dw_dma_of_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) { struct dw_dma *dw = ofdma->of_dma_data; - struct dw_dma_filter_args fargs = { + struct dw_dma_of_filter_args fargs = { .dw = dw, }; dma_cap_mask_t cap; @@ -1297,8 +1275,48 @@ static struct dma_chan *dw_dma_xlate(struct of_phandle_args *dma_spec, dma_cap_set(DMA_SLAVE, cap); /* TODO: there should be a simpler way to do this */ - return dma_request_channel(cap, dw_dma_generic_filter, &fargs); + return dma_request_channel(cap, dw_dma_of_filter, &fargs); +} + +#ifdef CONFIG_ACPI +static bool dw_dma_acpi_filter(struct dma_chan *chan, void *param) +{ + struct dw_dma_chan *dwc = to_dw_dma_chan(chan); + struct acpi_dma_spec *dma_spec = param; + + if (chan->device->dev != dma_spec->dev || + chan->chan_id != dma_spec->chan_id) + return false; + + dwc->request_line = dma_spec->slave_id; + dwc->src_master = dwc_get_sms(NULL); + dwc->dst_master = dwc_get_dms(NULL); + + return true; +} + +static void dw_dma_acpi_controller_register(struct dw_dma *dw) +{ + struct device *dev = dw->dma.dev; + struct acpi_dma_filter_info *info; + int ret; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return; + + dma_cap_zero(info->dma_cap); + dma_cap_set(DMA_SLAVE, info->dma_cap); + info->filter_fn = dw_dma_acpi_filter; + + ret = devm_acpi_dma_controller_register(dev, acpi_dma_simple_xlate, + info); + if (ret) + dev_err(dev, "could not register acpi_dma_controller\n"); } +#else /* !CONFIG_ACPI */ +static inline void dw_dma_acpi_controller_register(struct dw_dma *dw) {} +#endif /* !CONFIG_ACPI */ /* --------------------- Cyclic DMA API extensions -------------------- */ @@ -1322,7 +1340,7 @@ int dw_dma_cyclic_start(struct dma_chan *chan) spin_lock_irqsave(&dwc->lock, flags); - /* assert channel is idle */ + /* Assert channel is idle */ if (dma_readl(dw, CH_EN) & dwc->mask) { dev_err(chan2dev(&dwc->chan), "BUG: Attempted to start non-idle channel\n"); @@ -1334,7 +1352,7 @@ int dw_dma_cyclic_start(struct dma_chan *chan) dma_writel(dw, CLEAR.ERROR, dwc->mask); dma_writel(dw, CLEAR.XFER, dwc->mask); - /* setup DMAC channel registers */ + /* Setup DMAC channel registers */ channel_writel(dwc, LLP, dwc->cdesc->desc[0]->txd.phys); channel_writel(dwc, CTL_LO, DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN); channel_writel(dwc, CTL_HI, 0); @@ -1501,7 +1519,7 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, last = desc; } - /* lets make a cyclic list */ + /* Let's make a cyclic list */ last->lli.llp = cdesc->desc[0]->txd.phys; dev_dbg(chan2dev(&dwc->chan), "cyclic prepared buf 0x%llx len %zu " @@ -1636,7 +1654,6 @@ dw_dma_parse_dt(struct platform_device *pdev) static int dw_probe(struct platform_device *pdev) { - const struct platform_device_id *match; struct dw_dma_platform_data *pdata; struct resource *io; struct dw_dma *dw; @@ -1706,7 +1723,7 @@ static int dw_probe(struct platform_device *pdev) dw->regs = regs; - /* get hardware configuration parameters */ + /* Get hardware configuration parameters */ if (autocfg) { max_blk_size = dma_readl(dw, MAX_BLK_SIZE); @@ -1720,18 +1737,13 @@ static int dw_probe(struct platform_device *pdev) memcpy(dw->data_width, pdata->data_width, 4); } - /* Get the base request line if set */ - match = platform_get_device_id(pdev); - if (match) - dw->request_line_base = (unsigned int)match->driver_data; - /* Calculate all channel mask before DMA setup */ dw->all_chan_mask = (1 << nr_channels) - 1; - /* force dma off, just in case */ + /* Force dma off, just in case */ dw_dma_off(dw); - /* disable BLOCK interrupts as well */ + /* Disable BLOCK interrupts as well */ channel_clear_bit(dw, MASK.BLOCK, dw->all_chan_mask); err = devm_request_irq(&pdev->dev, irq, dw_dma_interrupt, 0, @@ -1741,7 +1753,7 @@ static int dw_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dw); - /* create a pool of consistent memory blocks for hardware descriptors */ + /* Create a pool of consistent memory blocks for hardware descriptors */ dw->desc_pool = dmam_pool_create("dw_dmac_desc_pool", &pdev->dev, sizeof(struct dw_desc), 4, 0); if (!dw->desc_pool) { @@ -1781,8 +1793,9 @@ static int dw_probe(struct platform_device *pdev) channel_clear_bit(dw, CH_EN, dwc->mask); dwc->direction = DMA_TRANS_NONE; + dwc->request_line = ~0; - /* hardware configuration */ + /* Hardware configuration */ if (autocfg) { unsigned int dwc_params; @@ -1842,12 +1855,15 @@ static int dw_probe(struct platform_device *pdev) if (pdev->dev.of_node) { err = of_dma_controller_register(pdev->dev.of_node, - dw_dma_xlate, dw); - if (err && err != -ENODEV) + dw_dma_of_xlate, dw); + if (err) dev_err(&pdev->dev, "could not register of_dma_controller\n"); } + if (ACPI_HANDLE(&pdev->dev)) + dw_dma_acpi_controller_register(dw); + return 0; } @@ -1912,18 +1928,19 @@ static const struct dev_pm_ops dw_dev_pm_ops = { }; #ifdef CONFIG_OF -static const struct of_device_id dw_dma_id_table[] = { +static const struct of_device_id dw_dma_of_id_table[] = { { .compatible = "snps,dma-spear1340" }, {} }; -MODULE_DEVICE_TABLE(of, dw_dma_id_table); +MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); #endif -static const struct platform_device_id dw_dma_ids[] = { - /* Name, Request Line Base */ - { "INTL9C60", (kernel_ulong_t)16 }, +#ifdef CONFIG_ACPI +static const struct acpi_device_id dw_dma_acpi_id_table[] = { + { "INTL9C60", 0 }, { } }; +#endif static struct platform_driver dw_driver = { .probe = dw_probe, @@ -1932,9 +1949,9 @@ static struct platform_driver dw_driver = { .driver = { .name = "dw_dmac", .pm = &dw_dev_pm_ops, - .of_match_table = of_match_ptr(dw_dma_id_table), + .of_match_table = of_match_ptr(dw_dma_of_id_table), + .acpi_match_table = ACPI_PTR(dw_dma_acpi_id_table), }, - .id_table = dw_dma_ids, }; static int __init dw_init(void) diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 4d02c36..9d41720 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -212,8 +212,11 @@ struct dw_dma_chan { /* hardware configuration */ unsigned int block_size; bool nollp; + + /* custom slave configuration */ unsigned int request_line; - struct dw_dma_slave slave; + unsigned char src_master; + unsigned char dst_master; /* configuration passed via DMA_SLAVE_CONFIG */ struct dma_slave_config dma_sconfig; @@ -247,7 +250,6 @@ struct dw_dma { /* hardware configuration */ unsigned char nr_masters; unsigned char data_width[4]; - unsigned int request_line_base; struct dw_dma_chan chan[0]; }; diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 70b8975..f285833 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -859,8 +859,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic( desc = list_first_entry(&imxdmac->ld_free, struct imxdma_desc, node); - if (imxdmac->sg_list) - kfree(imxdmac->sg_list); + kfree(imxdmac->sg_list); imxdmac->sg_list = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_KERNEL); @@ -1145,7 +1144,7 @@ err: return ret; } -static int __exit imxdma_remove(struct platform_device *pdev) +static int imxdma_remove(struct platform_device *pdev) { struct imxdma_engine *imxdma = platform_get_drvdata(pdev); @@ -1162,7 +1161,7 @@ static struct platform_driver imxdma_driver = { .name = "imx-dma", }, .id_table = imx_dma_devtype, - .remove = __exit_p(imxdma_remove), + .remove = imxdma_remove, }; static int __init imxdma_module_init(void) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index f082aa3..092867b 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1462,7 +1462,7 @@ err_irq: return ret; } -static int __exit sdma_remove(struct platform_device *pdev) +static int sdma_remove(struct platform_device *pdev) { return -EBUSY; } @@ -1473,7 +1473,7 @@ static struct platform_driver sdma_driver = { .of_match_table = sdma_dt_ids, }, .id_table = sdma_devtypes, - .remove = __exit_p(sdma_remove), + .remove = sdma_remove, }; static int __init sdma_module_init(void) diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index 1879a59..17a2393 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -892,7 +892,7 @@ MODULE_PARM_DESC(ioat_interrupt_style, * ioat_dma_setup_interrupts - setup interrupt handler * @device: ioat device */ -static int ioat_dma_setup_interrupts(struct ioatdma_device *device) +int ioat_dma_setup_interrupts(struct ioatdma_device *device) { struct ioat_chan_common *chan; struct pci_dev *pdev = device->pdev; @@ -941,6 +941,7 @@ msix: } } intrctrl |= IOAT_INTRCTRL_MSIX_VECTOR_CONTROL; + device->irq_mode = IOAT_MSIX; goto done; msix_single_vector: @@ -956,6 +957,7 @@ msix_single_vector: pci_disable_msix(pdev); goto msi; } + device->irq_mode = IOAT_MSIX_SINGLE; goto done; msi: @@ -969,6 +971,7 @@ msi: pci_disable_msi(pdev); goto intx; } + device->irq_mode = IOAT_MSIX; goto done; intx: @@ -977,6 +980,7 @@ intx: if (err) goto err_no_irq; + device->irq_mode = IOAT_INTX; done: if (device->intr_quirk) device->intr_quirk(device); @@ -987,9 +991,11 @@ done: err_no_irq: /* Disable all interrupt generation */ writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET); + device->irq_mode = IOAT_NOIRQ; dev_err(dev, "no usable interrupts\n"); return err; } +EXPORT_SYMBOL(ioat_dma_setup_interrupts); static void ioat_disable_interrupts(struct ioatdma_device *device) { diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 53a4cbb..54fb7b9 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -39,6 +39,7 @@ #define to_ioat_desc(lh) container_of(lh, struct ioat_desc_sw, node) #define tx_to_ioat_desc(tx) container_of(tx, struct ioat_desc_sw, txd) #define to_dev(ioat_chan) (&(ioat_chan)->device->pdev->dev) +#define to_pdev(ioat_chan) ((ioat_chan)->device->pdev) #define chan_num(ch) ((int)((ch)->reg_base - (ch)->device->reg_base) / 0x80) @@ -48,6 +49,14 @@ */ #define NULL_DESC_BUFFER_SIZE 1 +enum ioat_irq_mode { + IOAT_NOIRQ = 0, + IOAT_MSIX, + IOAT_MSIX_SINGLE, + IOAT_MSI, + IOAT_INTX +}; + /** * struct ioatdma_device - internal representation of a IOAT device * @pdev: PCI-Express device @@ -72,11 +81,16 @@ struct ioatdma_device { void __iomem *reg_base; struct pci_pool *dma_pool; struct pci_pool *completion_pool; +#define MAX_SED_POOLS 5 + struct dma_pool *sed_hw_pool[MAX_SED_POOLS]; + struct kmem_cache *sed_pool; struct dma_device common; u8 version; struct msix_entry msix_entries[4]; struct ioat_chan_common *idx[4]; struct dca_provider *dca; + enum ioat_irq_mode irq_mode; + u32 cap; void (*intr_quirk)(struct ioatdma_device *device); int (*enumerate_channels)(struct ioatdma_device *device); int (*reset_hw)(struct ioat_chan_common *chan); @@ -131,6 +145,20 @@ struct ioat_dma_chan { u16 active; }; +/** + * struct ioat_sed_ent - wrapper around super extended hardware descriptor + * @hw: hardware SED + * @sed_dma: dma address for the SED + * @list: list member + * @parent: point to the dma descriptor that's the parent + */ +struct ioat_sed_ent { + struct ioat_sed_raw_descriptor *hw; + dma_addr_t dma; + struct ioat_ring_ent *parent; + unsigned int hw_pool; +}; + static inline struct ioat_chan_common *to_chan_common(struct dma_chan *c) { return container_of(c, struct ioat_chan_common, common); @@ -179,7 +207,7 @@ __dump_desc_dbg(struct ioat_chan_common *chan, struct ioat_dma_descriptor *hw, struct device *dev = to_dev(chan); dev_dbg(dev, "desc[%d]: (%#llx->%#llx) cookie: %d flags: %#x" - " ctl: %#x (op: %d int_en: %d compl: %d)\n", id, + " ctl: %#10.8x (op: %#x int_en: %d compl: %d)\n", id, (unsigned long long) tx->phys, (unsigned long long) hw->next, tx->cookie, tx->flags, hw->ctl, hw->ctl_f.op, hw->ctl_f.int_en, hw->ctl_f.compl_write); @@ -201,7 +229,7 @@ ioat_chan_by_index(struct ioatdma_device *device, int index) return device->idx[index]; } -static inline u64 ioat_chansts(struct ioat_chan_common *chan) +static inline u64 ioat_chansts_32(struct ioat_chan_common *chan) { u8 ver = chan->device->version; u64 status; @@ -218,6 +246,26 @@ static inline u64 ioat_chansts(struct ioat_chan_common *chan) return status; } +#if BITS_PER_LONG == 64 + +static inline u64 ioat_chansts(struct ioat_chan_common *chan) +{ + u8 ver = chan->device->version; + u64 status; + + /* With IOAT v3.3 the status register is 64bit. */ + if (ver >= IOAT_VER_3_3) + status = readq(chan->reg_base + IOAT_CHANSTS_OFFSET(ver)); + else + status = ioat_chansts_32(chan); + + return status; +} + +#else +#define ioat_chansts ioat_chansts_32 +#endif + static inline void ioat_start(struct ioat_chan_common *chan) { u8 ver = chan->device->version; @@ -321,6 +369,7 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan, dma_addr_t *phys_complete); void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type); void ioat_kobject_del(struct ioatdma_device *device); +int ioat_dma_setup_interrupts(struct ioatdma_device *device); extern const struct sysfs_ops ioat_sysfs_ops; extern struct ioat_sysfs_entry ioat_version_attr; extern struct ioat_sysfs_entry ioat_cap_attr; diff --git a/drivers/dma/ioat/dma_v2.h b/drivers/dma/ioat/dma_v2.h index e100f64..29bf944 100644 --- a/drivers/dma/ioat/dma_v2.h +++ b/drivers/dma/ioat/dma_v2.h @@ -137,6 +137,7 @@ struct ioat_ring_ent { #ifdef DEBUG int id; #endif + struct ioat_sed_ent *sed; }; static inline struct ioat_ring_ent * @@ -157,6 +158,7 @@ static inline void ioat2_set_chainaddr(struct ioat2_dma_chan *ioat, u64 addr) int ioat2_dma_probe(struct ioatdma_device *dev, int dca); int ioat3_dma_probe(struct ioatdma_device *dev, int dca); +void ioat3_dma_remove(struct ioatdma_device *dev); struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase); struct dca_provider *ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase); int ioat2_check_space_lock(struct ioat2_dma_chan *ioat, int num_descs); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index e8336cc..ca6ea9b 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -55,7 +55,7 @@ /* * Support routines for v3+ hardware */ - +#include <linux/module.h> #include <linux/pci.h> #include <linux/gfp.h> #include <linux/dmaengine.h> @@ -70,6 +70,10 @@ /* ioat hardware assumes at least two sources for raid operations */ #define src_cnt_to_sw(x) ((x) + 2) #define src_cnt_to_hw(x) ((x) - 2) +#define ndest_to_sw(x) ((x) + 1) +#define ndest_to_hw(x) ((x) - 1) +#define src16_cnt_to_sw(x) ((x) + 9) +#define src16_cnt_to_hw(x) ((x) - 9) /* provide a lookup table for setting the source address in the base or * extended descriptor of an xor or pq descriptor @@ -77,7 +81,20 @@ static const u8 xor_idx_to_desc = 0xe0; static const u8 xor_idx_to_field[] = { 1, 4, 5, 6, 7, 0, 1, 2 }; static const u8 pq_idx_to_desc = 0xf8; +static const u8 pq16_idx_to_desc[] = { 0, 0, 1, 1, 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, 2, 2 }; static const u8 pq_idx_to_field[] = { 1, 4, 5, 0, 1, 2, 4, 5 }; +static const u8 pq16_idx_to_field[] = { 1, 4, 1, 2, 3, 4, 5, 6, 7, + 0, 1, 2, 3, 4, 5, 6 }; + +/* + * technically sources 1 and 2 do not require SED, but the op will have + * at least 9 descriptors so that's irrelevant. + */ +static const u8 pq16_idx_to_sed[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1 }; + +static void ioat3_eh(struct ioat2_dma_chan *ioat); static dma_addr_t xor_get_src(struct ioat_raw_descriptor *descs[2], int idx) { @@ -101,6 +118,13 @@ static dma_addr_t pq_get_src(struct ioat_raw_descriptor *descs[2], int idx) return raw->field[pq_idx_to_field[idx]]; } +static dma_addr_t pq16_get_src(struct ioat_raw_descriptor *desc[3], int idx) +{ + struct ioat_raw_descriptor *raw = desc[pq16_idx_to_desc[idx]]; + + return raw->field[pq16_idx_to_field[idx]]; +} + static void pq_set_src(struct ioat_raw_descriptor *descs[2], dma_addr_t addr, u32 offset, u8 coef, int idx) { @@ -111,6 +135,167 @@ static void pq_set_src(struct ioat_raw_descriptor *descs[2], pq->coef[idx] = coef; } +static int sed_get_pq16_pool_idx(int src_cnt) +{ + + return pq16_idx_to_sed[src_cnt]; +} + +static bool is_jf_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_JSF0: + case PCI_DEVICE_ID_INTEL_IOAT_JSF1: + case PCI_DEVICE_ID_INTEL_IOAT_JSF2: + case PCI_DEVICE_ID_INTEL_IOAT_JSF3: + case PCI_DEVICE_ID_INTEL_IOAT_JSF4: + case PCI_DEVICE_ID_INTEL_IOAT_JSF5: + case PCI_DEVICE_ID_INTEL_IOAT_JSF6: + case PCI_DEVICE_ID_INTEL_IOAT_JSF7: + case PCI_DEVICE_ID_INTEL_IOAT_JSF8: + case PCI_DEVICE_ID_INTEL_IOAT_JSF9: + return true; + default: + return false; + } +} + +static bool is_snb_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_SNB0: + case PCI_DEVICE_ID_INTEL_IOAT_SNB1: + case PCI_DEVICE_ID_INTEL_IOAT_SNB2: + case PCI_DEVICE_ID_INTEL_IOAT_SNB3: + case PCI_DEVICE_ID_INTEL_IOAT_SNB4: + case PCI_DEVICE_ID_INTEL_IOAT_SNB5: + case PCI_DEVICE_ID_INTEL_IOAT_SNB6: + case PCI_DEVICE_ID_INTEL_IOAT_SNB7: + case PCI_DEVICE_ID_INTEL_IOAT_SNB8: + case PCI_DEVICE_ID_INTEL_IOAT_SNB9: + return true; + default: + return false; + } +} + +static bool is_ivb_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_IVB0: + case PCI_DEVICE_ID_INTEL_IOAT_IVB1: + case PCI_DEVICE_ID_INTEL_IOAT_IVB2: + case PCI_DEVICE_ID_INTEL_IOAT_IVB3: + case PCI_DEVICE_ID_INTEL_IOAT_IVB4: + case PCI_DEVICE_ID_INTEL_IOAT_IVB5: + case PCI_DEVICE_ID_INTEL_IOAT_IVB6: + case PCI_DEVICE_ID_INTEL_IOAT_IVB7: + case PCI_DEVICE_ID_INTEL_IOAT_IVB8: + case PCI_DEVICE_ID_INTEL_IOAT_IVB9: + return true; + default: + return false; + } + +} + +static bool is_hsw_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_HSW0: + case PCI_DEVICE_ID_INTEL_IOAT_HSW1: + case PCI_DEVICE_ID_INTEL_IOAT_HSW2: + case PCI_DEVICE_ID_INTEL_IOAT_HSW3: + case PCI_DEVICE_ID_INTEL_IOAT_HSW4: + case PCI_DEVICE_ID_INTEL_IOAT_HSW5: + case PCI_DEVICE_ID_INTEL_IOAT_HSW6: + case PCI_DEVICE_ID_INTEL_IOAT_HSW7: + case PCI_DEVICE_ID_INTEL_IOAT_HSW8: + case PCI_DEVICE_ID_INTEL_IOAT_HSW9: + return true; + default: + return false; + } + +} + +static bool is_xeon_cb32(struct pci_dev *pdev) +{ + return is_jf_ioat(pdev) || is_snb_ioat(pdev) || is_ivb_ioat(pdev) || + is_hsw_ioat(pdev); +} + +static bool is_bwd_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_BWD0: + case PCI_DEVICE_ID_INTEL_IOAT_BWD1: + case PCI_DEVICE_ID_INTEL_IOAT_BWD2: + case PCI_DEVICE_ID_INTEL_IOAT_BWD3: + return true; + default: + return false; + } +} + +static bool is_bwd_noraid(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_BWD2: + case PCI_DEVICE_ID_INTEL_IOAT_BWD3: + return true; + default: + return false; + } + +} + +static void pq16_set_src(struct ioat_raw_descriptor *desc[3], + dma_addr_t addr, u32 offset, u8 coef, int idx) +{ + struct ioat_pq_descriptor *pq = (struct ioat_pq_descriptor *)desc[0]; + struct ioat_pq16a_descriptor *pq16 = + (struct ioat_pq16a_descriptor *)desc[1]; + struct ioat_raw_descriptor *raw = desc[pq16_idx_to_desc[idx]]; + + raw->field[pq16_idx_to_field[idx]] = addr + offset; + + if (idx < 8) + pq->coef[idx] = coef; + else + pq16->coef[idx - 8] = coef; +} + +static struct ioat_sed_ent * +ioat3_alloc_sed(struct ioatdma_device *device, unsigned int hw_pool) +{ + struct ioat_sed_ent *sed; + gfp_t flags = __GFP_ZERO | GFP_ATOMIC; + + sed = kmem_cache_alloc(device->sed_pool, flags); + if (!sed) + return NULL; + + sed->hw_pool = hw_pool; + sed->hw = dma_pool_alloc(device->sed_hw_pool[hw_pool], + flags, &sed->dma); + if (!sed->hw) { + kmem_cache_free(device->sed_pool, sed); + return NULL; + } + + return sed; +} + +static void ioat3_free_sed(struct ioatdma_device *device, struct ioat_sed_ent *sed) +{ + if (!sed) + return; + + dma_pool_free(device->sed_hw_pool[sed->hw_pool], sed->hw, sed->dma); + kmem_cache_free(device->sed_pool, sed); +} + static void ioat3_dma_unmap(struct ioat2_dma_chan *ioat, struct ioat_ring_ent *desc, int idx) { @@ -223,6 +408,54 @@ static void ioat3_dma_unmap(struct ioat2_dma_chan *ioat, } break; } + case IOAT_OP_PQ_16S: + case IOAT_OP_PQ_VAL_16S: { + struct ioat_pq_descriptor *pq = desc->pq; + int src_cnt = src16_cnt_to_sw(pq->ctl_f.src_cnt); + struct ioat_raw_descriptor *descs[4]; + int i; + + /* in the 'continue' case don't unmap the dests as sources */ + if (dmaf_p_disabled_continue(flags)) + src_cnt--; + else if (dmaf_continue(flags)) + src_cnt -= 3; + + if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + descs[0] = (struct ioat_raw_descriptor *)pq; + descs[1] = (struct ioat_raw_descriptor *)(desc->sed->hw); + descs[2] = (struct ioat_raw_descriptor *)(&desc->sed->hw->b[0]); + for (i = 0; i < src_cnt; i++) { + dma_addr_t src = pq16_get_src(descs, i); + + ioat_unmap(pdev, src - offset, len, + PCI_DMA_TODEVICE, flags, 0); + } + + /* the dests are sources in pq validate operations */ + if (pq->ctl_f.op == IOAT_OP_XOR_VAL) { + if (!(flags & DMA_PREP_PQ_DISABLE_P)) + ioat_unmap(pdev, pq->p_addr - offset, + len, PCI_DMA_TODEVICE, + flags, 0); + if (!(flags & DMA_PREP_PQ_DISABLE_Q)) + ioat_unmap(pdev, pq->q_addr - offset, + len, PCI_DMA_TODEVICE, + flags, 0); + break; + } + } + + if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (!(flags & DMA_PREP_PQ_DISABLE_P)) + ioat_unmap(pdev, pq->p_addr - offset, len, + PCI_DMA_BIDIRECTIONAL, flags, 1); + if (!(flags & DMA_PREP_PQ_DISABLE_Q)) + ioat_unmap(pdev, pq->q_addr - offset, len, + PCI_DMA_BIDIRECTIONAL, flags, 1); + } + break; + } default: dev_err(&pdev->dev, "%s: unknown op type: %#x\n", __func__, desc->hw->ctl_f.op); @@ -250,6 +483,63 @@ static bool desc_has_ext(struct ioat_ring_ent *desc) return false; } +static u64 ioat3_get_current_completion(struct ioat_chan_common *chan) +{ + u64 phys_complete; + u64 completion; + + completion = *chan->completion; + phys_complete = ioat_chansts_to_addr(completion); + + dev_dbg(to_dev(chan), "%s: phys_complete: %#llx\n", __func__, + (unsigned long long) phys_complete); + + return phys_complete; +} + +static bool ioat3_cleanup_preamble(struct ioat_chan_common *chan, + u64 *phys_complete) +{ + *phys_complete = ioat3_get_current_completion(chan); + if (*phys_complete == chan->last_completion) + return false; + + clear_bit(IOAT_COMPLETION_ACK, &chan->state); + mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT); + + return true; +} + +static void +desc_get_errstat(struct ioat2_dma_chan *ioat, struct ioat_ring_ent *desc) +{ + struct ioat_dma_descriptor *hw = desc->hw; + + switch (hw->ctl_f.op) { + case IOAT_OP_PQ_VAL: + case IOAT_OP_PQ_VAL_16S: + { + struct ioat_pq_descriptor *pq = desc->pq; + + /* check if there's error written */ + if (!pq->dwbes_f.wbes) + return; + + /* need to set a chanerr var for checking to clear later */ + + if (pq->dwbes_f.p_val_err) + *desc->result |= SUM_CHECK_P_RESULT; + + if (pq->dwbes_f.q_val_err) + *desc->result |= SUM_CHECK_Q_RESULT; + + return; + } + default: + return; + } +} + /** * __cleanup - reclaim used descriptors * @ioat: channel (ring) to clean @@ -260,6 +550,7 @@ static bool desc_has_ext(struct ioat_ring_ent *desc) static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) { struct ioat_chan_common *chan = &ioat->base; + struct ioatdma_device *device = chan->device; struct ioat_ring_ent *desc; bool seen_current = false; int idx = ioat->tail, i; @@ -268,6 +559,16 @@ static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) dev_dbg(to_dev(chan), "%s: head: %#x tail: %#x issued: %#x\n", __func__, ioat->head, ioat->tail, ioat->issued); + /* + * At restart of the channel, the completion address and the + * channel status will be 0 due to starting a new chain. Since + * it's new chain and the first descriptor "fails", there is + * nothing to clean up. We do not want to reap the entire submitted + * chain due to this 0 address value and then BUG. + */ + if (!phys_complete) + return; + active = ioat2_ring_active(ioat); for (i = 0; i < active && !seen_current; i++) { struct dma_async_tx_descriptor *tx; @@ -276,6 +577,11 @@ static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) prefetch(ioat2_get_ring_ent(ioat, idx + i + 1)); desc = ioat2_get_ring_ent(ioat, idx + i); dump_desc_dbg(ioat, desc); + + /* set err stat if we are using dwbes */ + if (device->cap & IOAT_CAP_DWBES) + desc_get_errstat(ioat, desc); + tx = &desc->txd; if (tx->cookie) { dma_cookie_complete(tx); @@ -294,6 +600,12 @@ static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) BUG_ON(i + 1 >= active); i++; } + + /* cleanup super extended descriptors */ + if (desc->sed) { + ioat3_free_sed(device, desc->sed); + desc->sed = NULL; + } } smp_mb(); /* finish all descriptor reads before incrementing tail */ ioat->tail = idx + i; @@ -314,11 +626,22 @@ static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) static void ioat3_cleanup(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - dma_addr_t phys_complete; + u64 phys_complete; spin_lock_bh(&chan->cleanup_lock); - if (ioat_cleanup_preamble(chan, &phys_complete)) + + if (ioat3_cleanup_preamble(chan, &phys_complete)) __cleanup(ioat, phys_complete); + + if (is_ioat_halted(*chan->completion)) { + u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + + if (chanerr & IOAT_CHANERR_HANDLE_MASK) { + mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT); + ioat3_eh(ioat); + } + } + spin_unlock_bh(&chan->cleanup_lock); } @@ -333,15 +656,78 @@ static void ioat3_cleanup_event(unsigned long data) static void ioat3_restart_channel(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - dma_addr_t phys_complete; + u64 phys_complete; ioat2_quiesce(chan, 0); - if (ioat_cleanup_preamble(chan, &phys_complete)) + if (ioat3_cleanup_preamble(chan, &phys_complete)) __cleanup(ioat, phys_complete); __ioat2_restart_chan(ioat); } +static void ioat3_eh(struct ioat2_dma_chan *ioat) +{ + struct ioat_chan_common *chan = &ioat->base; + struct pci_dev *pdev = to_pdev(chan); + struct ioat_dma_descriptor *hw; + u64 phys_complete; + struct ioat_ring_ent *desc; + u32 err_handled = 0; + u32 chanerr_int; + u32 chanerr; + + /* cleanup so tail points to descriptor that caused the error */ + if (ioat3_cleanup_preamble(chan, &phys_complete)) + __cleanup(ioat, phys_complete); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr_int); + + dev_dbg(to_dev(chan), "%s: error = %x:%x\n", + __func__, chanerr, chanerr_int); + + desc = ioat2_get_ring_ent(ioat, ioat->tail); + hw = desc->hw; + dump_desc_dbg(ioat, desc); + + switch (hw->ctl_f.op) { + case IOAT_OP_XOR_VAL: + if (chanerr & IOAT_CHANERR_XOR_P_OR_CRC_ERR) { + *desc->result |= SUM_CHECK_P_RESULT; + err_handled |= IOAT_CHANERR_XOR_P_OR_CRC_ERR; + } + break; + case IOAT_OP_PQ_VAL: + case IOAT_OP_PQ_VAL_16S: + if (chanerr & IOAT_CHANERR_XOR_P_OR_CRC_ERR) { + *desc->result |= SUM_CHECK_P_RESULT; + err_handled |= IOAT_CHANERR_XOR_P_OR_CRC_ERR; + } + if (chanerr & IOAT_CHANERR_XOR_Q_ERR) { + *desc->result |= SUM_CHECK_Q_RESULT; + err_handled |= IOAT_CHANERR_XOR_Q_ERR; + } + break; + } + + /* fault on unhandled error or spurious halt */ + if (chanerr ^ err_handled || chanerr == 0) { + dev_err(to_dev(chan), "%s: fatal error (%x:%x)\n", + __func__, chanerr, err_handled); + BUG(); + } + + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr_int); + + /* mark faulting descriptor as complete */ + *chan->completion = desc->txd.phys; + + spin_lock_bh(&ioat->prep_lock); + ioat3_restart_channel(ioat); + spin_unlock_bh(&ioat->prep_lock); +} + static void check_active(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; @@ -605,7 +991,8 @@ dump_pq_desc_dbg(struct ioat2_dma_chan *ioat, struct ioat_ring_ent *desc, struct int i; dev_dbg(dev, "desc[%d]: (%#llx->%#llx) flags: %#x" - " sz: %#x ctl: %#x (op: %d int: %d compl: %d pq: '%s%s' src_cnt: %d)\n", + " sz: %#10.8x ctl: %#x (op: %#x int: %d compl: %d pq: '%s%s'" + " src_cnt: %d)\n", desc_id(desc), (unsigned long long) desc->txd.phys, (unsigned long long) (pq_ex ? pq_ex->next : pq->next), desc->txd.flags, pq->size, pq->ctl, pq->ctl_f.op, pq->ctl_f.int_en, @@ -617,6 +1004,42 @@ dump_pq_desc_dbg(struct ioat2_dma_chan *ioat, struct ioat_ring_ent *desc, struct (unsigned long long) pq_get_src(descs, i), pq->coef[i]); dev_dbg(dev, "\tP: %#llx\n", pq->p_addr); dev_dbg(dev, "\tQ: %#llx\n", pq->q_addr); + dev_dbg(dev, "\tNEXT: %#llx\n", pq->next); +} + +static void dump_pq16_desc_dbg(struct ioat2_dma_chan *ioat, + struct ioat_ring_ent *desc) +{ + struct device *dev = to_dev(&ioat->base); + struct ioat_pq_descriptor *pq = desc->pq; + struct ioat_raw_descriptor *descs[] = { (void *)pq, + (void *)pq, + (void *)pq }; + int src_cnt = src16_cnt_to_sw(pq->ctl_f.src_cnt); + int i; + + if (desc->sed) { + descs[1] = (void *)desc->sed->hw; + descs[2] = (void *)desc->sed->hw + 64; + } + + dev_dbg(dev, "desc[%d]: (%#llx->%#llx) flags: %#x" + " sz: %#x ctl: %#x (op: %#x int: %d compl: %d pq: '%s%s'" + " src_cnt: %d)\n", + desc_id(desc), (unsigned long long) desc->txd.phys, + (unsigned long long) pq->next, + desc->txd.flags, pq->size, pq->ctl, + pq->ctl_f.op, pq->ctl_f.int_en, + pq->ctl_f.compl_write, + pq->ctl_f.p_disable ? "" : "p", pq->ctl_f.q_disable ? "" : "q", + pq->ctl_f.src_cnt); + for (i = 0; i < src_cnt; i++) { + dev_dbg(dev, "\tsrc[%d]: %#llx coef: %#x\n", i, + (unsigned long long) pq16_get_src(descs, i), + pq->coef[i]); + } + dev_dbg(dev, "\tP: %#llx\n", pq->p_addr); + dev_dbg(dev, "\tQ: %#llx\n", pq->q_addr); } static struct dma_async_tx_descriptor * @@ -627,6 +1050,7 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, { struct ioat2_dma_chan *ioat = to_ioat2_chan(c); struct ioat_chan_common *chan = &ioat->base; + struct ioatdma_device *device = chan->device; struct ioat_ring_ent *compl_desc; struct ioat_ring_ent *desc; struct ioat_ring_ent *ext; @@ -637,6 +1061,7 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, u32 offset = 0; u8 op = result ? IOAT_OP_PQ_VAL : IOAT_OP_PQ; int i, s, idx, with_ext, num_descs; + int cb32 = (device->version < IOAT_VER_3_3) ? 1 : 0; dev_dbg(to_dev(chan), "%s\n", __func__); /* the engine requires at least two sources (we provide @@ -662,7 +1087,7 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, * order. */ if (likely(num_descs) && - ioat2_check_space_lock(ioat, num_descs+1) == 0) + ioat2_check_space_lock(ioat, num_descs + cb32) == 0) idx = ioat->head; else return NULL; @@ -700,6 +1125,9 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, pq->q_addr = dst[1] + offset; pq->ctl = 0; pq->ctl_f.op = op; + /* we turn on descriptor write back error status */ + if (device->cap & IOAT_CAP_DWBES) + pq->ctl_f.wb_en = result ? 1 : 0; pq->ctl_f.src_cnt = src_cnt_to_hw(s); pq->ctl_f.p_disable = !!(flags & DMA_PREP_PQ_DISABLE_P); pq->ctl_f.q_disable = !!(flags & DMA_PREP_PQ_DISABLE_Q); @@ -716,26 +1144,140 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, pq->ctl_f.fence = !!(flags & DMA_PREP_FENCE); dump_pq_desc_dbg(ioat, desc, ext); - /* completion descriptor carries interrupt bit */ - compl_desc = ioat2_get_ring_ent(ioat, idx + i); - compl_desc->txd.flags = flags & DMA_PREP_INTERRUPT; - hw = compl_desc->hw; - hw->ctl = 0; - hw->ctl_f.null = 1; - hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT); - hw->ctl_f.compl_write = 1; - hw->size = NULL_DESC_BUFFER_SIZE; - dump_desc_dbg(ioat, compl_desc); + if (!cb32) { + pq->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT); + pq->ctl_f.compl_write = 1; + compl_desc = desc; + } else { + /* completion descriptor carries interrupt bit */ + compl_desc = ioat2_get_ring_ent(ioat, idx + i); + compl_desc->txd.flags = flags & DMA_PREP_INTERRUPT; + hw = compl_desc->hw; + hw->ctl = 0; + hw->ctl_f.null = 1; + hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT); + hw->ctl_f.compl_write = 1; + hw->size = NULL_DESC_BUFFER_SIZE; + dump_desc_dbg(ioat, compl_desc); + } + /* we leave the channel locked to ensure in order submission */ return &compl_desc->txd; } static struct dma_async_tx_descriptor * +__ioat3_prep_pq16_lock(struct dma_chan *c, enum sum_check_flags *result, + const dma_addr_t *dst, const dma_addr_t *src, + unsigned int src_cnt, const unsigned char *scf, + size_t len, unsigned long flags) +{ + struct ioat2_dma_chan *ioat = to_ioat2_chan(c); + struct ioat_chan_common *chan = &ioat->base; + struct ioatdma_device *device = chan->device; + struct ioat_ring_ent *desc; + size_t total_len = len; + struct ioat_pq_descriptor *pq; + u32 offset = 0; + u8 op; + int i, s, idx, num_descs; + + /* this function only handles src_cnt 9 - 16 */ + BUG_ON(src_cnt < 9); + + /* this function is only called with 9-16 sources */ + op = result ? IOAT_OP_PQ_VAL_16S : IOAT_OP_PQ_16S; + + dev_dbg(to_dev(chan), "%s\n", __func__); + + num_descs = ioat2_xferlen_to_descs(ioat, len); + + /* + * 16 source pq is only available on cb3.3 and has no completion + * write hw bug. + */ + if (num_descs && ioat2_check_space_lock(ioat, num_descs) == 0) + idx = ioat->head; + else + return NULL; + + i = 0; + + do { + struct ioat_raw_descriptor *descs[4]; + size_t xfer_size = min_t(size_t, len, 1 << ioat->xfercap_log); + + desc = ioat2_get_ring_ent(ioat, idx + i); + pq = desc->pq; + + descs[0] = (struct ioat_raw_descriptor *) pq; + + desc->sed = ioat3_alloc_sed(device, + sed_get_pq16_pool_idx(src_cnt)); + if (!desc->sed) { + dev_err(to_dev(chan), + "%s: no free sed entries\n", __func__); + return NULL; + } + + pq->sed_addr = desc->sed->dma; + desc->sed->parent = desc; + + descs[1] = (struct ioat_raw_descriptor *)desc->sed->hw; + descs[2] = (void *)descs[1] + 64; + + for (s = 0; s < src_cnt; s++) + pq16_set_src(descs, src[s], offset, scf[s], s); + + /* see the comment for dma_maxpq in include/linux/dmaengine.h */ + if (dmaf_p_disabled_continue(flags)) + pq16_set_src(descs, dst[1], offset, 1, s++); + else if (dmaf_continue(flags)) { + pq16_set_src(descs, dst[0], offset, 0, s++); + pq16_set_src(descs, dst[1], offset, 1, s++); + pq16_set_src(descs, dst[1], offset, 0, s++); + } + + pq->size = xfer_size; + pq->p_addr = dst[0] + offset; + pq->q_addr = dst[1] + offset; + pq->ctl = 0; + pq->ctl_f.op = op; + pq->ctl_f.src_cnt = src16_cnt_to_hw(s); + /* we turn on descriptor write back error status */ + if (device->cap & IOAT_CAP_DWBES) + pq->ctl_f.wb_en = result ? 1 : 0; + pq->ctl_f.p_disable = !!(flags & DMA_PREP_PQ_DISABLE_P); + pq->ctl_f.q_disable = !!(flags & DMA_PREP_PQ_DISABLE_Q); + + len -= xfer_size; + offset += xfer_size; + } while (++i < num_descs); + + /* last pq descriptor carries the unmap parameters and fence bit */ + desc->txd.flags = flags; + desc->len = total_len; + if (result) + desc->result = result; + pq->ctl_f.fence = !!(flags & DMA_PREP_FENCE); + + /* with cb3.3 we should be able to do completion w/o a null desc */ + pq->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT); + pq->ctl_f.compl_write = 1; + + dump_pq16_desc_dbg(ioat, desc); + + /* we leave the channel locked to ensure in order submission */ + return &desc->txd; +} + +static struct dma_async_tx_descriptor * ioat3_prep_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, unsigned long flags) { + struct dma_device *dma = chan->device; + /* specify valid address for disabled result */ if (flags & DMA_PREP_PQ_DISABLE_P) dst[0] = dst[1]; @@ -755,11 +1297,20 @@ ioat3_prep_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, single_source_coef[0] = scf[0]; single_source_coef[1] = 0; - return __ioat3_prep_pq_lock(chan, NULL, dst, single_source, 2, - single_source_coef, len, flags); - } else - return __ioat3_prep_pq_lock(chan, NULL, dst, src, src_cnt, scf, - len, flags); + return (src_cnt > 8) && (dma->max_pq > 8) ? + __ioat3_prep_pq16_lock(chan, NULL, dst, single_source, + 2, single_source_coef, len, + flags) : + __ioat3_prep_pq_lock(chan, NULL, dst, single_source, 2, + single_source_coef, len, flags); + + } else { + return (src_cnt > 8) && (dma->max_pq > 8) ? + __ioat3_prep_pq16_lock(chan, NULL, dst, src, src_cnt, + scf, len, flags) : + __ioat3_prep_pq_lock(chan, NULL, dst, src, src_cnt, + scf, len, flags); + } } struct dma_async_tx_descriptor * @@ -767,6 +1318,8 @@ ioat3_prep_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, enum sum_check_flags *pqres, unsigned long flags) { + struct dma_device *dma = chan->device; + /* specify valid address for disabled result */ if (flags & DMA_PREP_PQ_DISABLE_P) pq[0] = pq[1]; @@ -778,14 +1331,18 @@ ioat3_prep_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, */ *pqres = 0; - return __ioat3_prep_pq_lock(chan, pqres, pq, src, src_cnt, scf, len, - flags); + return (src_cnt > 8) && (dma->max_pq > 8) ? + __ioat3_prep_pq16_lock(chan, pqres, pq, src, src_cnt, scf, len, + flags) : + __ioat3_prep_pq_lock(chan, pqres, pq, src, src_cnt, scf, len, + flags); } static struct dma_async_tx_descriptor * ioat3_prep_pqxor(struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src, unsigned int src_cnt, size_t len, unsigned long flags) { + struct dma_device *dma = chan->device; unsigned char scf[src_cnt]; dma_addr_t pq[2]; @@ -794,8 +1351,11 @@ ioat3_prep_pqxor(struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src, flags |= DMA_PREP_PQ_DISABLE_Q; pq[1] = dst; /* specify valid address for disabled result */ - return __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len, - flags); + return (src_cnt > 8) && (dma->max_pq > 8) ? + __ioat3_prep_pq16_lock(chan, NULL, pq, src, src_cnt, scf, len, + flags) : + __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len, + flags); } struct dma_async_tx_descriptor * @@ -803,6 +1363,7 @@ ioat3_prep_pqxor_val(struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt, size_t len, enum sum_check_flags *result, unsigned long flags) { + struct dma_device *dma = chan->device; unsigned char scf[src_cnt]; dma_addr_t pq[2]; @@ -816,8 +1377,12 @@ ioat3_prep_pqxor_val(struct dma_chan *chan, dma_addr_t *src, flags |= DMA_PREP_PQ_DISABLE_Q; pq[1] = pq[0]; /* specify valid address for disabled result */ - return __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, scf, - len, flags); + + return (src_cnt > 8) && (dma->max_pq > 8) ? + __ioat3_prep_pq16_lock(chan, result, pq, &src[1], src_cnt - 1, + scf, len, flags) : + __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, + scf, len, flags); } static struct dma_async_tx_descriptor * @@ -1167,6 +1732,56 @@ static int ioat3_dma_self_test(struct ioatdma_device *device) return 0; } +static int ioat3_irq_reinit(struct ioatdma_device *device) +{ + int msixcnt = device->common.chancnt; + struct pci_dev *pdev = device->pdev; + int i; + struct msix_entry *msix; + struct ioat_chan_common *chan; + int err = 0; + + switch (device->irq_mode) { + case IOAT_MSIX: + + for (i = 0; i < msixcnt; i++) { + msix = &device->msix_entries[i]; + chan = ioat_chan_by_index(device, i); + devm_free_irq(&pdev->dev, msix->vector, chan); + } + + pci_disable_msix(pdev); + break; + + case IOAT_MSIX_SINGLE: + msix = &device->msix_entries[0]; + chan = ioat_chan_by_index(device, 0); + devm_free_irq(&pdev->dev, msix->vector, chan); + pci_disable_msix(pdev); + break; + + case IOAT_MSI: + chan = ioat_chan_by_index(device, 0); + devm_free_irq(&pdev->dev, pdev->irq, chan); + pci_disable_msi(pdev); + break; + + case IOAT_INTX: + chan = ioat_chan_by_index(device, 0); + devm_free_irq(&pdev->dev, pdev->irq, chan); + break; + + default: + return 0; + } + + device->irq_mode = IOAT_NOIRQ; + + err = ioat_dma_setup_interrupts(device); + + return err; +} + static int ioat3_reset_hw(struct ioat_chan_common *chan) { /* throw away whatever the channel was doing and get it @@ -1183,80 +1798,65 @@ static int ioat3_reset_hw(struct ioat_chan_common *chan) chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); - /* clear any pending errors */ - err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr); + if (device->version < IOAT_VER_3_3) { + /* clear any pending errors */ + err = pci_read_config_dword(pdev, + IOAT_PCI_CHANERR_INT_OFFSET, &chanerr); + if (err) { + dev_err(&pdev->dev, + "channel error register unreachable\n"); + return err; + } + pci_write_config_dword(pdev, + IOAT_PCI_CHANERR_INT_OFFSET, chanerr); + + /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit + * (workaround for spurious config parity error after restart) + */ + pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); + if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) { + pci_write_config_dword(pdev, + IOAT_PCI_DMAUNCERRSTS_OFFSET, + 0x10); + } + } + + err = ioat2_reset_sync(chan, msecs_to_jiffies(200)); if (err) { - dev_err(&pdev->dev, "channel error register unreachable\n"); + dev_err(&pdev->dev, "Failed to reset!\n"); return err; } - pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr); - /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit - * (workaround for spurious config parity error after restart) - */ - pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); - if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) - pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); + if (device->irq_mode != IOAT_NOIRQ && is_bwd_ioat(pdev)) + err = ioat3_irq_reinit(device); - return ioat2_reset_sync(chan, msecs_to_jiffies(200)); + return err; } -static bool is_jf_ioat(struct pci_dev *pdev) +static void ioat3_intr_quirk(struct ioatdma_device *device) { - switch (pdev->device) { - case PCI_DEVICE_ID_INTEL_IOAT_JSF0: - case PCI_DEVICE_ID_INTEL_IOAT_JSF1: - case PCI_DEVICE_ID_INTEL_IOAT_JSF2: - case PCI_DEVICE_ID_INTEL_IOAT_JSF3: - case PCI_DEVICE_ID_INTEL_IOAT_JSF4: - case PCI_DEVICE_ID_INTEL_IOAT_JSF5: - case PCI_DEVICE_ID_INTEL_IOAT_JSF6: - case PCI_DEVICE_ID_INTEL_IOAT_JSF7: - case PCI_DEVICE_ID_INTEL_IOAT_JSF8: - case PCI_DEVICE_ID_INTEL_IOAT_JSF9: - return true; - default: - return false; - } -} + struct dma_device *dma; + struct dma_chan *c; + struct ioat_chan_common *chan; + u32 errmask; -static bool is_snb_ioat(struct pci_dev *pdev) -{ - switch (pdev->device) { - case PCI_DEVICE_ID_INTEL_IOAT_SNB0: - case PCI_DEVICE_ID_INTEL_IOAT_SNB1: - case PCI_DEVICE_ID_INTEL_IOAT_SNB2: - case PCI_DEVICE_ID_INTEL_IOAT_SNB3: - case PCI_DEVICE_ID_INTEL_IOAT_SNB4: - case PCI_DEVICE_ID_INTEL_IOAT_SNB5: - case PCI_DEVICE_ID_INTEL_IOAT_SNB6: - case PCI_DEVICE_ID_INTEL_IOAT_SNB7: - case PCI_DEVICE_ID_INTEL_IOAT_SNB8: - case PCI_DEVICE_ID_INTEL_IOAT_SNB9: - return true; - default: - return false; - } -} + dma = &device->common; -static bool is_ivb_ioat(struct pci_dev *pdev) -{ - switch (pdev->device) { - case PCI_DEVICE_ID_INTEL_IOAT_IVB0: - case PCI_DEVICE_ID_INTEL_IOAT_IVB1: - case PCI_DEVICE_ID_INTEL_IOAT_IVB2: - case PCI_DEVICE_ID_INTEL_IOAT_IVB3: - case PCI_DEVICE_ID_INTEL_IOAT_IVB4: - case PCI_DEVICE_ID_INTEL_IOAT_IVB5: - case PCI_DEVICE_ID_INTEL_IOAT_IVB6: - case PCI_DEVICE_ID_INTEL_IOAT_IVB7: - case PCI_DEVICE_ID_INTEL_IOAT_IVB8: - case PCI_DEVICE_ID_INTEL_IOAT_IVB9: - return true; - default: - return false; + /* + * if we have descriptor write back error status, we mask the + * error interrupts + */ + if (device->cap & IOAT_CAP_DWBES) { + list_for_each_entry(c, &dma->channels, device_node) { + chan = to_chan_common(c); + errmask = readl(chan->reg_base + + IOAT_CHANERR_MASK_OFFSET); + errmask |= IOAT_CHANERR_XOR_P_OR_CRC_ERR | + IOAT_CHANERR_XOR_Q_ERR; + writel(errmask, chan->reg_base + + IOAT_CHANERR_MASK_OFFSET); + } } - } int ioat3_dma_probe(struct ioatdma_device *device, int dca) @@ -1268,30 +1868,33 @@ int ioat3_dma_probe(struct ioatdma_device *device, int dca) struct ioat_chan_common *chan; bool is_raid_device = false; int err; - u32 cap; device->enumerate_channels = ioat2_enumerate_channels; device->reset_hw = ioat3_reset_hw; device->self_test = ioat3_dma_self_test; + device->intr_quirk = ioat3_intr_quirk; dma = &device->common; dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock; dma->device_issue_pending = ioat2_issue_pending; dma->device_alloc_chan_resources = ioat2_alloc_chan_resources; dma->device_free_chan_resources = ioat2_free_chan_resources; - if (is_jf_ioat(pdev) || is_snb_ioat(pdev) || is_ivb_ioat(pdev)) + if (is_xeon_cb32(pdev)) dma->copy_align = 6; dma_cap_set(DMA_INTERRUPT, dma->cap_mask); dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock; - cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET); + device->cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET); + + if (is_bwd_noraid(pdev)) + device->cap &= ~(IOAT_CAP_XOR | IOAT_CAP_PQ | IOAT_CAP_RAID16SS); /* dca is incompatible with raid operations */ - if (dca_en && (cap & (IOAT_CAP_XOR|IOAT_CAP_PQ))) - cap &= ~(IOAT_CAP_XOR|IOAT_CAP_PQ); + if (dca_en && (device->cap & (IOAT_CAP_XOR|IOAT_CAP_PQ))) + device->cap &= ~(IOAT_CAP_XOR|IOAT_CAP_PQ); - if (cap & IOAT_CAP_XOR) { + if (device->cap & IOAT_CAP_XOR) { is_raid_device = true; dma->max_xor = 8; dma->xor_align = 6; @@ -1302,53 +1905,86 @@ int ioat3_dma_probe(struct ioatdma_device *device, int dca) dma_cap_set(DMA_XOR_VAL, dma->cap_mask); dma->device_prep_dma_xor_val = ioat3_prep_xor_val; } - if (cap & IOAT_CAP_PQ) { + + if (device->cap & IOAT_CAP_PQ) { is_raid_device = true; - dma_set_maxpq(dma, 8, 0); - dma->pq_align = 6; - dma_cap_set(DMA_PQ, dma->cap_mask); dma->device_prep_dma_pq = ioat3_prep_pq; - - dma_cap_set(DMA_PQ_VAL, dma->cap_mask); dma->device_prep_dma_pq_val = ioat3_prep_pq_val; + dma_cap_set(DMA_PQ, dma->cap_mask); + dma_cap_set(DMA_PQ_VAL, dma->cap_mask); - if (!(cap & IOAT_CAP_XOR)) { - dma->max_xor = 8; - dma->xor_align = 6; + if (device->cap & IOAT_CAP_RAID16SS) { + dma_set_maxpq(dma, 16, 0); + dma->pq_align = 0; + } else { + dma_set_maxpq(dma, 8, 0); + if (is_xeon_cb32(pdev)) + dma->pq_align = 6; + else + dma->pq_align = 0; + } - dma_cap_set(DMA_XOR, dma->cap_mask); + if (!(device->cap & IOAT_CAP_XOR)) { dma->device_prep_dma_xor = ioat3_prep_pqxor; - - dma_cap_set(DMA_XOR_VAL, dma->cap_mask); dma->device_prep_dma_xor_val = ioat3_prep_pqxor_val; + dma_cap_set(DMA_XOR, dma->cap_mask); + dma_cap_set(DMA_XOR_VAL, dma->cap_mask); + + if (device->cap & IOAT_CAP_RAID16SS) { + dma->max_xor = 16; + dma->xor_align = 0; + } else { + dma->max_xor = 8; + if (is_xeon_cb32(pdev)) + dma->xor_align = 6; + else + dma->xor_align = 0; + } } } - if (is_raid_device && (cap & IOAT_CAP_FILL_BLOCK)) { + + if (is_raid_device && (device->cap & IOAT_CAP_FILL_BLOCK)) { dma_cap_set(DMA_MEMSET, dma->cap_mask); dma->device_prep_dma_memset = ioat3_prep_memset_lock; } - if (is_raid_device) { - dma->device_tx_status = ioat3_tx_status; - device->cleanup_fn = ioat3_cleanup_event; - device->timer_fn = ioat3_timer_event; - } else { - dma->device_tx_status = ioat_dma_tx_status; - device->cleanup_fn = ioat2_cleanup_event; - device->timer_fn = ioat2_timer_event; + dma->device_tx_status = ioat3_tx_status; + device->cleanup_fn = ioat3_cleanup_event; + device->timer_fn = ioat3_timer_event; + + if (is_xeon_cb32(pdev)) { + dma_cap_clear(DMA_XOR_VAL, dma->cap_mask); + dma->device_prep_dma_xor_val = NULL; + + dma_cap_clear(DMA_PQ_VAL, dma->cap_mask); + dma->device_prep_dma_pq_val = NULL; } - #ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA - dma_cap_clear(DMA_PQ_VAL, dma->cap_mask); - dma->device_prep_dma_pq_val = NULL; - #endif + /* starting with CB3.3 super extended descriptors are supported */ + if (device->cap & IOAT_CAP_RAID16SS) { + char pool_name[14]; + int i; + + /* allocate sw descriptor pool for SED */ + device->sed_pool = kmem_cache_create("ioat_sed", + sizeof(struct ioat_sed_ent), 0, 0, NULL); + if (!device->sed_pool) + return -ENOMEM; + + for (i = 0; i < MAX_SED_POOLS; i++) { + snprintf(pool_name, 14, "ioat_hw%d_sed", i); - #ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA - dma_cap_clear(DMA_XOR_VAL, dma->cap_mask); - dma->device_prep_dma_xor_val = NULL; - #endif + /* allocate SED DMA pool */ + device->sed_hw_pool[i] = dma_pool_create(pool_name, + &pdev->dev, + SED_SIZE * (i + 1), 64, 0); + if (!device->sed_hw_pool[i]) + goto sed_pool_cleanup; + + } + } err = ioat_probe(device); if (err) @@ -1371,4 +2007,28 @@ int ioat3_dma_probe(struct ioatdma_device *device, int dca) device->dca = ioat3_dca_init(pdev, device->reg_base); return 0; + +sed_pool_cleanup: + if (device->sed_pool) { + int i; + kmem_cache_destroy(device->sed_pool); + + for (i = 0; i < MAX_SED_POOLS; i++) + if (device->sed_hw_pool[i]) + dma_pool_destroy(device->sed_hw_pool[i]); + } + + return -ENOMEM; +} + +void ioat3_dma_remove(struct ioatdma_device *device) +{ + if (device->sed_pool) { + int i; + kmem_cache_destroy(device->sed_pool); + + for (i = 0; i < MAX_SED_POOLS; i++) + if (device->sed_hw_pool[i]) + dma_pool_destroy(device->sed_hw_pool[i]); + } } diff --git a/drivers/dma/ioat/hw.h b/drivers/dma/ioat/hw.h index 7cb74c6..5ee57d4 100644 --- a/drivers/dma/ioat/hw.h +++ b/drivers/dma/ioat/hw.h @@ -30,11 +30,6 @@ #define IOAT_PCI_DID_SCNB 0x65FF #define IOAT_PCI_DID_SNB 0x402F -#define IOAT_VER_1_2 0x12 /* Version 1.2 */ -#define IOAT_VER_2_0 0x20 /* Version 2.0 */ -#define IOAT_VER_3_0 0x30 /* Version 3.0 */ -#define IOAT_VER_3_2 0x32 /* Version 3.2 */ - #define PCI_DEVICE_ID_INTEL_IOAT_IVB0 0x0e20 #define PCI_DEVICE_ID_INTEL_IOAT_IVB1 0x0e21 #define PCI_DEVICE_ID_INTEL_IOAT_IVB2 0x0e22 @@ -46,6 +41,29 @@ #define PCI_DEVICE_ID_INTEL_IOAT_IVB8 0x0e2e #define PCI_DEVICE_ID_INTEL_IOAT_IVB9 0x0e2f +#define PCI_DEVICE_ID_INTEL_IOAT_HSW0 0x2f20 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW1 0x2f21 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW2 0x2f22 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW3 0x2f23 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW4 0x2f24 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW5 0x2f25 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW6 0x2f26 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW7 0x2f27 +#define PCI_DEVICE_ID_INTEL_IOAT_HSW8 0x2f2e +#define PCI_DEVICE_ID_INTEL_IOAT_HSW9 0x2f2f + +#define PCI_DEVICE_ID_INTEL_IOAT_BWD0 0x0C50 +#define PCI_DEVICE_ID_INTEL_IOAT_BWD1 0x0C51 +#define PCI_DEVICE_ID_INTEL_IOAT_BWD2 0x0C52 +#define PCI_DEVICE_ID_INTEL_IOAT_BWD3 0x0C53 + +#define IOAT_VER_1_2 0x12 /* Version 1.2 */ +#define IOAT_VER_2_0 0x20 /* Version 2.0 */ +#define IOAT_VER_3_0 0x30 /* Version 3.0 */ +#define IOAT_VER_3_2 0x32 /* Version 3.2 */ +#define IOAT_VER_3_3 0x33 /* Version 3.3 */ + + int system_has_dca_enabled(struct pci_dev *pdev); struct ioat_dma_descriptor { @@ -147,7 +165,17 @@ struct ioat_xor_ext_descriptor { }; struct ioat_pq_descriptor { - uint32_t size; + union { + uint32_t size; + uint32_t dwbes; + struct { + unsigned int rsvd:25; + unsigned int p_val_err:1; + unsigned int q_val_err:1; + unsigned int rsvd1:4; + unsigned int wbes:1; + } dwbes_f; + }; union { uint32_t ctl; struct { @@ -162,9 +190,14 @@ struct ioat_pq_descriptor { unsigned int hint:1; unsigned int p_disable:1; unsigned int q_disable:1; - unsigned int rsvd:11; + unsigned int rsvd2:2; + unsigned int wb_en:1; + unsigned int prl_en:1; + unsigned int rsvd3:7; #define IOAT_OP_PQ 0x89 #define IOAT_OP_PQ_VAL 0x8a + #define IOAT_OP_PQ_16S 0xa0 + #define IOAT_OP_PQ_VAL_16S 0xa1 unsigned int op:8; } ctl_f; }; @@ -172,7 +205,10 @@ struct ioat_pq_descriptor { uint64_t p_addr; uint64_t next; uint64_t src_addr2; - uint64_t src_addr3; + union { + uint64_t src_addr3; + uint64_t sed_addr; + }; uint8_t coef[8]; uint64_t q_addr; }; @@ -221,4 +257,40 @@ struct ioat_pq_update_descriptor { struct ioat_raw_descriptor { uint64_t field[8]; }; + +struct ioat_pq16a_descriptor { + uint8_t coef[8]; + uint64_t src_addr3; + uint64_t src_addr4; + uint64_t src_addr5; + uint64_t src_addr6; + uint64_t src_addr7; + uint64_t src_addr8; + uint64_t src_addr9; +}; + +struct ioat_pq16b_descriptor { + uint64_t src_addr10; + uint64_t src_addr11; + uint64_t src_addr12; + uint64_t src_addr13; + uint64_t src_addr14; + uint64_t src_addr15; + uint64_t src_addr16; + uint64_t rsvd; +}; + +union ioat_sed_pq_descriptor { + struct ioat_pq16a_descriptor a; + struct ioat_pq16b_descriptor b; +}; + +#define SED_SIZE 64 + +struct ioat_sed_raw_descriptor { + uint64_t a[8]; + uint64_t b[8]; + uint64_t c[8]; +}; + #endif diff --git a/drivers/dma/ioat/pci.c b/drivers/dma/ioat/pci.c index 71c7ecd..2c8d560 100644 --- a/drivers/dma/ioat/pci.c +++ b/drivers/dma/ioat/pci.c @@ -94,6 +94,23 @@ static struct pci_device_id ioat_pci_tbl[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_IVB8) }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_IVB9) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW0) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW1) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW2) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW3) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW4) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW5) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW6) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW7) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW8) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_HSW9) }, + + /* I/OAT v3.3 platforms */ + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD0) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD1) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD2) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD3) }, + { 0, } }; MODULE_DEVICE_TABLE(pci, ioat_pci_tbl); @@ -190,6 +207,9 @@ static void ioat_remove(struct pci_dev *pdev) if (!device) return; + if (device->version >= IOAT_VER_3_0) + ioat3_dma_remove(device); + dev_err(&pdev->dev, "Removing dma and dca services\n"); if (device->dca) { unregister_dca_provider(device->dca, &pdev->dev); diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h index 1391798..2f1cfa0 100644 --- a/drivers/dma/ioat/registers.h +++ b/drivers/dma/ioat/registers.h @@ -79,6 +79,8 @@ #define IOAT_CAP_APIC 0x00000080 #define IOAT_CAP_XOR 0x00000100 #define IOAT_CAP_PQ 0x00000200 +#define IOAT_CAP_DWBES 0x00002000 +#define IOAT_CAP_RAID16SS 0x00020000 #define IOAT_CHANNEL_MMIO_SIZE 0x80 /* Each Channel MMIO space is this size */ @@ -93,6 +95,8 @@ #define IOAT_CHANCTRL_ERR_COMPLETION_EN 0x0004 #define IOAT_CHANCTRL_INT_REARM 0x0001 #define IOAT_CHANCTRL_RUN (IOAT_CHANCTRL_INT_REARM |\ + IOAT_CHANCTRL_ERR_INT_EN |\ + IOAT_CHANCTRL_ERR_COMPLETION_EN |\ IOAT_CHANCTRL_ANY_ERR_ABORT_EN) #define IOAT_DMA_COMP_OFFSET 0x02 /* 16-bit DMA channel compatibility */ diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 8c61d17..d39c2cd 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1642,7 +1642,7 @@ static int __init ipu_idmac_init(struct ipu *ipu) return dma_async_device_register(&idmac->dma); } -static void __exit ipu_idmac_exit(struct ipu *ipu) +static void ipu_idmac_exit(struct ipu *ipu) { int i; struct idmac *idmac = &ipu->idmac; @@ -1756,7 +1756,7 @@ err_noirq: return ret; } -static int __exit ipu_remove(struct platform_device *pdev) +static int ipu_remove(struct platform_device *pdev) { struct ipu *ipu = platform_get_drvdata(pdev); @@ -1781,7 +1781,7 @@ static struct platform_driver ipu_platform_driver = { .name = "ipu-core", .owner = THIS_MODULE, }, - .remove = __exit_p(ipu_remove), + .remove = ipu_remove, }; static int __init ipu_init(void) diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c index 69d04d2..7aa0864 100644 --- a/drivers/dma/of-dma.c +++ b/drivers/dma/of-dma.c @@ -13,43 +13,31 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/module.h> -#include <linux/rculist.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <linux/of.h> #include <linux/of_dma.h> static LIST_HEAD(of_dma_list); -static DEFINE_SPINLOCK(of_dma_lock); +static DEFINE_MUTEX(of_dma_lock); /** - * of_dma_get_controller - Get a DMA controller in DT DMA helpers list + * of_dma_find_controller - Get a DMA controller in DT DMA helpers list * @dma_spec: pointer to DMA specifier as found in the device tree * * Finds a DMA controller with matching device node and number for dma cells - * in a list of registered DMA controllers. If a match is found the use_count - * variable is increased and a valid pointer to the DMA data stored is retuned. - * A NULL pointer is returned if no match is found. + * in a list of registered DMA controllers. If a match is found a valid pointer + * to the DMA data stored is retuned. A NULL pointer is returned if no match is + * found. */ -static struct of_dma *of_dma_get_controller(struct of_phandle_args *dma_spec) +static struct of_dma *of_dma_find_controller(struct of_phandle_args *dma_spec) { struct of_dma *ofdma; - spin_lock(&of_dma_lock); - - if (list_empty(&of_dma_list)) { - spin_unlock(&of_dma_lock); - return NULL; - } - list_for_each_entry(ofdma, &of_dma_list, of_dma_controllers) if ((ofdma->of_node == dma_spec->np) && - (ofdma->of_dma_nbcells == dma_spec->args_count)) { - ofdma->use_count++; - spin_unlock(&of_dma_lock); + (ofdma->of_dma_nbcells == dma_spec->args_count)) return ofdma; - } - - spin_unlock(&of_dma_lock); pr_debug("%s: can't find DMA controller %s\n", __func__, dma_spec->np->full_name); @@ -58,22 +46,6 @@ static struct of_dma *of_dma_get_controller(struct of_phandle_args *dma_spec) } /** - * of_dma_put_controller - Decrement use count for a registered DMA controller - * @of_dma: pointer to DMA controller data - * - * Decrements the use_count variable in the DMA data structure. This function - * should be called only when a valid pointer is returned from - * of_dma_get_controller() and no further accesses to data referenced by that - * pointer are needed. - */ -static void of_dma_put_controller(struct of_dma *ofdma) -{ - spin_lock(&of_dma_lock); - ofdma->use_count--; - spin_unlock(&of_dma_lock); -} - -/** * of_dma_controller_register - Register a DMA controller to DT DMA helpers * @np: device node of DMA controller * @of_dma_xlate: translation function which converts a phandle @@ -93,6 +65,7 @@ int of_dma_controller_register(struct device_node *np, { struct of_dma *ofdma; int nbcells; + const __be32 *prop; if (!np || !of_dma_xlate) { pr_err("%s: not enough information provided\n", __func__); @@ -103,8 +76,11 @@ int of_dma_controller_register(struct device_node *np, if (!ofdma) return -ENOMEM; - nbcells = be32_to_cpup(of_get_property(np, "#dma-cells", NULL)); - if (!nbcells) { + prop = of_get_property(np, "#dma-cells", NULL); + if (prop) + nbcells = be32_to_cpup(prop); + + if (!prop || !nbcells) { pr_err("%s: #dma-cells property is missing or invalid\n", __func__); kfree(ofdma); @@ -115,12 +91,11 @@ int of_dma_controller_register(struct device_node *np, ofdma->of_dma_nbcells = nbcells; ofdma->of_dma_xlate = of_dma_xlate; ofdma->of_dma_data = data; - ofdma->use_count = 0; /* Now queue of_dma controller structure in list */ - spin_lock(&of_dma_lock); + mutex_lock(&of_dma_lock); list_add_tail(&ofdma->of_dma_controllers, &of_dma_list); - spin_unlock(&of_dma_lock); + mutex_unlock(&of_dma_lock); return 0; } @@ -132,32 +107,20 @@ EXPORT_SYMBOL_GPL(of_dma_controller_register); * * Memory allocated by of_dma_controller_register() is freed here. */ -int of_dma_controller_free(struct device_node *np) +void of_dma_controller_free(struct device_node *np) { struct of_dma *ofdma; - spin_lock(&of_dma_lock); - - if (list_empty(&of_dma_list)) { - spin_unlock(&of_dma_lock); - return -ENODEV; - } + mutex_lock(&of_dma_lock); list_for_each_entry(ofdma, &of_dma_list, of_dma_controllers) if (ofdma->of_node == np) { - if (ofdma->use_count) { - spin_unlock(&of_dma_lock); - return -EBUSY; - } - list_del(&ofdma->of_dma_controllers); - spin_unlock(&of_dma_lock); kfree(ofdma); - return 0; + break; } - spin_unlock(&of_dma_lock); - return -ENODEV; + mutex_unlock(&of_dma_lock); } EXPORT_SYMBOL_GPL(of_dma_controller_free); @@ -172,8 +135,8 @@ EXPORT_SYMBOL_GPL(of_dma_controller_free); * specifiers, matches the name provided. Returns 0 if the name matches and * a valid pointer to the DMA specifier is found. Otherwise returns -ENODEV. */ -static int of_dma_match_channel(struct device_node *np, char *name, int index, - struct of_phandle_args *dma_spec) +static int of_dma_match_channel(struct device_node *np, const char *name, + int index, struct of_phandle_args *dma_spec) { const char *s; @@ -198,7 +161,7 @@ static int of_dma_match_channel(struct device_node *np, char *name, int index, * Returns pointer to appropriate dma channel on success or NULL on error. */ struct dma_chan *of_dma_request_slave_channel(struct device_node *np, - char *name) + const char *name) { struct of_phandle_args dma_spec; struct of_dma *ofdma; @@ -220,14 +183,15 @@ struct dma_chan *of_dma_request_slave_channel(struct device_node *np, if (of_dma_match_channel(np, name, i, &dma_spec)) continue; - ofdma = of_dma_get_controller(&dma_spec); - - if (!ofdma) - continue; + mutex_lock(&of_dma_lock); + ofdma = of_dma_find_controller(&dma_spec); - chan = ofdma->of_dma_xlate(&dma_spec, ofdma); + if (ofdma) + chan = ofdma->of_dma_xlate(&dma_spec, ofdma); + else + chan = NULL; - of_dma_put_controller(ofdma); + mutex_unlock(&of_dma_lock); of_node_put(dma_spec.np); diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index 08b43bf..ec3fc4f 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -16,6 +16,8 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/of_dma.h> +#include <linux/of_device.h> #include "virt-dma.h" @@ -67,6 +69,10 @@ static const unsigned es_bytes[] = { [OMAP_DMA_DATA_TYPE_S32] = 4, }; +static struct of_dma_filter_info omap_dma_info = { + .filter_fn = omap_dma_filter_fn, +}; + static inline struct omap_dmadev *to_omap_dma_dev(struct dma_device *d) { return container_of(d, struct omap_dmadev, ddev); @@ -629,8 +635,22 @@ static int omap_dma_probe(struct platform_device *pdev) pr_warn("OMAP-DMA: failed to register slave DMA engine device: %d\n", rc); omap_dma_free(od); - } else { - platform_set_drvdata(pdev, od); + return rc; + } + + platform_set_drvdata(pdev, od); + + if (pdev->dev.of_node) { + omap_dma_info.dma_cap = od->ddev.cap_mask; + + /* Device-tree DMA controller registration */ + rc = of_dma_controller_register(pdev->dev.of_node, + of_dma_simple_xlate, &omap_dma_info); + if (rc) { + pr_warn("OMAP-DMA: failed to register DMA controller\n"); + dma_async_device_unregister(&od->ddev); + omap_dma_free(od); + } } dev_info(&pdev->dev, "OMAP DMA engine driver\n"); @@ -642,18 +662,32 @@ static int omap_dma_remove(struct platform_device *pdev) { struct omap_dmadev *od = platform_get_drvdata(pdev); + if (pdev->dev.of_node) + of_dma_controller_free(pdev->dev.of_node); + dma_async_device_unregister(&od->ddev); omap_dma_free(od); return 0; } +static const struct of_device_id omap_dma_match[] = { + { .compatible = "ti,omap2420-sdma", }, + { .compatible = "ti,omap2430-sdma", }, + { .compatible = "ti,omap3430-sdma", }, + { .compatible = "ti,omap3630-sdma", }, + { .compatible = "ti,omap4430-sdma", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_dma_match); + static struct platform_driver omap_dma_driver = { .probe = omap_dma_probe, .remove = omap_dma_remove, .driver = { .name = "omap-dma-engine", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(omap_dma_match), }, }; diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index d01faeb..ce3dc3e 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -476,7 +476,7 @@ static struct pch_dma_desc *pdc_desc_get(struct pch_dma_chan *pd_chan) dev_dbg(chan2dev(&pd_chan->chan), "scanned %d descriptors\n", i); if (!ret) { - ret = pdc_alloc_desc(&pd_chan->chan, GFP_NOIO); + ret = pdc_alloc_desc(&pd_chan->chan, GFP_ATOMIC); if (ret) { spin_lock(&pd_chan->lock); pd_chan->descs_allocated++; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 5dbc594..a17553f 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -26,6 +26,7 @@ #include <linux/scatterlist.h> #include <linux/of.h> #include <linux/of_dma.h> +#include <linux/err.h> #include "dmaengine.h" #define PL330_MAX_CHAN 8 @@ -2288,13 +2289,12 @@ static inline void fill_queue(struct dma_pl330_chan *pch) /* If already submitted */ if (desc->status == BUSY) - break; + continue; ret = pl330_submit_req(pch->pl330_chid, &desc->req); if (!ret) { desc->status = BUSY; - break; } else if (ret == -EAGAIN) { /* QFull or DMAC Dying */ break; @@ -2904,9 +2904,9 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0; res = &adev->res; - pi->base = devm_request_and_ioremap(&adev->dev, res); - if (!pi->base) - return -ENXIO; + pi->base = devm_ioremap_resource(&adev->dev, res); + if (IS_ERR(pi->base)) + return PTR_ERR(pi->base); amba_set_drvdata(adev, pdmac); diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig new file mode 100644 index 0000000..5c1dee2 --- /dev/null +++ b/drivers/dma/sh/Kconfig @@ -0,0 +1,24 @@ +# +# DMA engine configuration for sh +# + +config SH_DMAE_BASE + bool "Renesas SuperH DMA Engine support" + depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE) + depends on !SH_DMA_API + default y + select DMA_ENGINE + help + Enable support for the Renesas SuperH DMA controllers. + +config SH_DMAE + tristate "Renesas SuperH DMAC support" + depends on SH_DMAE_BASE + help + Enable support for the Renesas SuperH DMA controllers. + +config SUDMAC + tristate "Renesas SUDMAC support" + depends on SH_DMAE_BASE + help + Enable support for the Renesas SUDMAC controllers. diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile index 54ae957..c07ca46 100644 --- a/drivers/dma/sh/Makefile +++ b/drivers/dma/sh/Makefile @@ -1,2 +1,3 @@ -obj-$(CONFIG_SH_DMAE) += shdma-base.o +obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o obj-$(CONFIG_SH_DMAE) += shdma.o +obj-$(CONFIG_SUDMAC) += sudmac.o diff --git a/drivers/dma/sh/sudmac.c b/drivers/dma/sh/sudmac.c new file mode 100644 index 0000000..e7c94bb --- /dev/null +++ b/drivers/dma/sh/sudmac.c @@ -0,0 +1,428 @@ +/* + * Renesas SUDMAC support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * based on drivers/dma/sh/shdma.c: + * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved. + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/dmaengine.h> +#include <linux/platform_device.h> +#include <linux/sudmac.h> + +struct sudmac_chan { + struct shdma_chan shdma_chan; + void __iomem *base; + char dev_id[16]; /* unique name per DMAC of channel */ + + u32 offset; /* for CFG, BA, BBC, CA, CBC, DEN */ + u32 cfg; + u32 dint_end_bit; +}; + +struct sudmac_device { + struct shdma_dev shdma_dev; + struct sudmac_pdata *pdata; + void __iomem *chan_reg; +}; + +struct sudmac_regs { + u32 base_addr; + u32 base_byte_count; +}; + +struct sudmac_desc { + struct sudmac_regs hw; + struct shdma_desc shdma_desc; +}; + +#define to_chan(schan) container_of(schan, struct sudmac_chan, shdma_chan) +#define to_desc(sdesc) container_of(sdesc, struct sudmac_desc, shdma_desc) +#define to_sdev(sc) container_of(sc->shdma_chan.dma_chan.device, \ + struct sudmac_device, shdma_dev.dma_dev) + +/* SUDMAC register */ +#define SUDMAC_CH0CFG 0x00 +#define SUDMAC_CH0BA 0x10 +#define SUDMAC_CH0BBC 0x18 +#define SUDMAC_CH0CA 0x20 +#define SUDMAC_CH0CBC 0x28 +#define SUDMAC_CH0DEN 0x30 +#define SUDMAC_DSTSCLR 0x38 +#define SUDMAC_DBUFCTRL 0x3C +#define SUDMAC_DINTCTRL 0x40 +#define SUDMAC_DINTSTS 0x44 +#define SUDMAC_DINTSTSCLR 0x48 +#define SUDMAC_CH0SHCTRL 0x50 + +/* Definitions for the sudmac_channel.config */ +#define SUDMAC_SENDBUFM 0x1000 /* b12: Transmit Buffer Mode */ +#define SUDMAC_RCVENDM 0x0100 /* b8: Receive Data Transfer End Mode */ +#define SUDMAC_LBA_WAIT 0x0030 /* b5-4: Local Bus Access Wait */ + +/* Definitions for the sudmac_channel.dint_end_bit */ +#define SUDMAC_CH1ENDE 0x0002 /* b1: Ch1 DMA Transfer End Int Enable */ +#define SUDMAC_CH0ENDE 0x0001 /* b0: Ch0 DMA Transfer End Int Enable */ + +#define SUDMAC_DRV_NAME "sudmac" + +static void sudmac_writel(struct sudmac_chan *sc, u32 data, u32 reg) +{ + iowrite32(data, sc->base + reg); +} + +static u32 sudmac_readl(struct sudmac_chan *sc, u32 reg) +{ + return ioread32(sc->base + reg); +} + +static bool sudmac_is_busy(struct sudmac_chan *sc) +{ + u32 den = sudmac_readl(sc, SUDMAC_CH0DEN + sc->offset); + + if (den) + return true; /* working */ + + return false; /* waiting */ +} + +static void sudmac_set_reg(struct sudmac_chan *sc, struct sudmac_regs *hw, + struct shdma_desc *sdesc) +{ + sudmac_writel(sc, sc->cfg, SUDMAC_CH0CFG + sc->offset); + sudmac_writel(sc, hw->base_addr, SUDMAC_CH0BA + sc->offset); + sudmac_writel(sc, hw->base_byte_count, SUDMAC_CH0BBC + sc->offset); +} + +static void sudmac_start(struct sudmac_chan *sc) +{ + u32 dintctrl = sudmac_readl(sc, SUDMAC_DINTCTRL); + + sudmac_writel(sc, dintctrl | sc->dint_end_bit, SUDMAC_DINTCTRL); + sudmac_writel(sc, 1, SUDMAC_CH0DEN + sc->offset); +} + +static void sudmac_start_xfer(struct shdma_chan *schan, + struct shdma_desc *sdesc) +{ + struct sudmac_chan *sc = to_chan(schan); + struct sudmac_desc *sd = to_desc(sdesc); + + sudmac_set_reg(sc, &sd->hw, sdesc); + sudmac_start(sc); +} + +static bool sudmac_channel_busy(struct shdma_chan *schan) +{ + struct sudmac_chan *sc = to_chan(schan); + + return sudmac_is_busy(sc); +} + +static void sudmac_setup_xfer(struct shdma_chan *schan, int slave_id) +{ +} + +static const struct sudmac_slave_config *sudmac_find_slave( + struct sudmac_chan *sc, int slave_id) +{ + struct sudmac_device *sdev = to_sdev(sc); + struct sudmac_pdata *pdata = sdev->pdata; + const struct sudmac_slave_config *cfg; + int i; + + for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++) + if (cfg->slave_id == slave_id) + return cfg; + + return NULL; +} + +static int sudmac_set_slave(struct shdma_chan *schan, int slave_id, bool try) +{ + struct sudmac_chan *sc = to_chan(schan); + const struct sudmac_slave_config *cfg = sudmac_find_slave(sc, slave_id); + + if (!cfg) + return -ENODEV; + + return 0; +} + +static inline void sudmac_dma_halt(struct sudmac_chan *sc) +{ + u32 dintctrl = sudmac_readl(sc, SUDMAC_DINTCTRL); + + sudmac_writel(sc, 0, SUDMAC_CH0DEN + sc->offset); + sudmac_writel(sc, dintctrl & ~sc->dint_end_bit, SUDMAC_DINTCTRL); + sudmac_writel(sc, sc->dint_end_bit, SUDMAC_DINTSTSCLR); +} + +static int sudmac_desc_setup(struct shdma_chan *schan, + struct shdma_desc *sdesc, + dma_addr_t src, dma_addr_t dst, size_t *len) +{ + struct sudmac_chan *sc = to_chan(schan); + struct sudmac_desc *sd = to_desc(sdesc); + + dev_dbg(sc->shdma_chan.dev, "%s: src=%x, dst=%x, len=%d\n", + __func__, src, dst, *len); + + if (*len > schan->max_xfer_len) + *len = schan->max_xfer_len; + + if (dst) + sd->hw.base_addr = dst; + else if (src) + sd->hw.base_addr = src; + sd->hw.base_byte_count = *len; + + return 0; +} + +static void sudmac_halt(struct shdma_chan *schan) +{ + struct sudmac_chan *sc = to_chan(schan); + + sudmac_dma_halt(sc); +} + +static bool sudmac_chan_irq(struct shdma_chan *schan, int irq) +{ + struct sudmac_chan *sc = to_chan(schan); + u32 dintsts = sudmac_readl(sc, SUDMAC_DINTSTS); + + if (!(dintsts & sc->dint_end_bit)) + return false; + + /* DMA stop */ + sudmac_dma_halt(sc); + + return true; +} + +static size_t sudmac_get_partial(struct shdma_chan *schan, + struct shdma_desc *sdesc) +{ + struct sudmac_chan *sc = to_chan(schan); + struct sudmac_desc *sd = to_desc(sdesc); + u32 current_byte_count = sudmac_readl(sc, SUDMAC_CH0CBC + sc->offset); + + return sd->hw.base_byte_count - current_byte_count; +} + +static bool sudmac_desc_completed(struct shdma_chan *schan, + struct shdma_desc *sdesc) +{ + struct sudmac_chan *sc = to_chan(schan); + struct sudmac_desc *sd = to_desc(sdesc); + u32 current_addr = sudmac_readl(sc, SUDMAC_CH0CA + sc->offset); + + return sd->hw.base_addr + sd->hw.base_byte_count == current_addr; +} + +static int sudmac_chan_probe(struct sudmac_device *su_dev, int id, int irq, + unsigned long flags) +{ + struct shdma_dev *sdev = &su_dev->shdma_dev; + struct platform_device *pdev = to_platform_device(sdev->dma_dev.dev); + struct sudmac_chan *sc; + struct shdma_chan *schan; + int err; + + sc = devm_kzalloc(&pdev->dev, sizeof(struct sudmac_chan), GFP_KERNEL); + if (!sc) { + dev_err(sdev->dma_dev.dev, + "No free memory for allocating dma channels!\n"); + return -ENOMEM; + } + + schan = &sc->shdma_chan; + schan->max_xfer_len = 64 * 1024 * 1024 - 1; + + shdma_chan_probe(sdev, schan, id); + + sc->base = su_dev->chan_reg; + + /* get platform_data */ + sc->offset = su_dev->pdata->channel->offset; + if (su_dev->pdata->channel->config & SUDMAC_TX_BUFFER_MODE) + sc->cfg |= SUDMAC_SENDBUFM; + if (su_dev->pdata->channel->config & SUDMAC_RX_END_MODE) + sc->cfg |= SUDMAC_RCVENDM; + sc->cfg |= (su_dev->pdata->channel->wait << 4) & SUDMAC_LBA_WAIT; + + if (su_dev->pdata->channel->dint_end_bit & SUDMAC_DMA_BIT_CH0) + sc->dint_end_bit |= SUDMAC_CH0ENDE; + if (su_dev->pdata->channel->dint_end_bit & SUDMAC_DMA_BIT_CH1) + sc->dint_end_bit |= SUDMAC_CH1ENDE; + + /* set up channel irq */ + if (pdev->id >= 0) + snprintf(sc->dev_id, sizeof(sc->dev_id), "sudmac%d.%d", + pdev->id, id); + else + snprintf(sc->dev_id, sizeof(sc->dev_id), "sudmac%d", id); + + err = shdma_request_irq(schan, irq, flags, sc->dev_id); + if (err) { + dev_err(sdev->dma_dev.dev, + "DMA channel %d request_irq failed %d\n", id, err); + goto err_no_irq; + } + + return 0; + +err_no_irq: + /* remove from dmaengine device node */ + shdma_chan_remove(schan); + return err; +} + +static void sudmac_chan_remove(struct sudmac_device *su_dev) +{ + struct dma_device *dma_dev = &su_dev->shdma_dev.dma_dev; + struct shdma_chan *schan; + int i; + + shdma_for_each_chan(schan, &su_dev->shdma_dev, i) { + struct sudmac_chan *sc = to_chan(schan); + + BUG_ON(!schan); + + shdma_free_irq(&sc->shdma_chan); + shdma_chan_remove(schan); + } + dma_dev->chancnt = 0; +} + +static dma_addr_t sudmac_slave_addr(struct shdma_chan *schan) +{ + /* SUDMAC doesn't need the address */ + return 0; +} + +static struct shdma_desc *sudmac_embedded_desc(void *buf, int i) +{ + return &((struct sudmac_desc *)buf)[i].shdma_desc; +} + +static const struct shdma_ops sudmac_shdma_ops = { + .desc_completed = sudmac_desc_completed, + .halt_channel = sudmac_halt, + .channel_busy = sudmac_channel_busy, + .slave_addr = sudmac_slave_addr, + .desc_setup = sudmac_desc_setup, + .set_slave = sudmac_set_slave, + .setup_xfer = sudmac_setup_xfer, + .start_xfer = sudmac_start_xfer, + .embedded_desc = sudmac_embedded_desc, + .chan_irq = sudmac_chan_irq, + .get_partial = sudmac_get_partial, +}; + +static int sudmac_probe(struct platform_device *pdev) +{ + struct sudmac_pdata *pdata = pdev->dev.platform_data; + int err, i; + struct sudmac_device *su_dev; + struct dma_device *dma_dev; + struct resource *chan, *irq_res; + + /* get platform data */ + if (!pdata) + return -ENODEV; + + chan = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!chan || !irq_res) + return -ENODEV; + + err = -ENOMEM; + su_dev = devm_kzalloc(&pdev->dev, sizeof(struct sudmac_device), + GFP_KERNEL); + if (!su_dev) { + dev_err(&pdev->dev, "Not enough memory\n"); + return err; + } + + dma_dev = &su_dev->shdma_dev.dma_dev; + + su_dev->chan_reg = devm_request_and_ioremap(&pdev->dev, chan); + if (!su_dev->chan_reg) + return err; + + dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); + + su_dev->shdma_dev.ops = &sudmac_shdma_ops; + su_dev->shdma_dev.desc_size = sizeof(struct sudmac_desc); + err = shdma_init(&pdev->dev, &su_dev->shdma_dev, pdata->channel_num); + if (err < 0) + return err; + + /* platform data */ + su_dev->pdata = pdev->dev.platform_data; + + platform_set_drvdata(pdev, su_dev); + + /* Create DMA Channel */ + for (i = 0; i < pdata->channel_num; i++) { + err = sudmac_chan_probe(su_dev, i, irq_res->start, IRQF_SHARED); + if (err) + goto chan_probe_err; + } + + err = dma_async_device_register(&su_dev->shdma_dev.dma_dev); + if (err < 0) + goto chan_probe_err; + + return err; + +chan_probe_err: + sudmac_chan_remove(su_dev); + + platform_set_drvdata(pdev, NULL); + shdma_cleanup(&su_dev->shdma_dev); + + return err; +} + +static int sudmac_remove(struct platform_device *pdev) +{ + struct sudmac_device *su_dev = platform_get_drvdata(pdev); + struct dma_device *dma_dev = &su_dev->shdma_dev.dma_dev; + + dma_async_device_unregister(dma_dev); + sudmac_chan_remove(su_dev); + shdma_cleanup(&su_dev->shdma_dev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sudmac_driver = { + .driver = { + .owner = THIS_MODULE, + .name = SUDMAC_DRV_NAME, + }, + .probe = sudmac_probe, + .remove = sudmac_remove, +}; +module_platform_driver(sudmac_driver); + +MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_DESCRIPTION("Renesas SUDMAC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" SUDMAC_DRV_NAME); diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 1d627e2..1765a0a 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -16,6 +16,7 @@ #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/clk.h> #include <linux/sirfsoc_dma.h> #include "dmaengine.h" @@ -78,6 +79,7 @@ struct sirfsoc_dma { struct sirfsoc_dma_chan channels[SIRFSOC_DMA_CHANNELS]; void __iomem *base; int irq; + struct clk *clk; bool is_marco; }; @@ -639,6 +641,12 @@ static int sirfsoc_dma_probe(struct platform_device *op) return -EINVAL; } + sdma->clk = devm_clk_get(dev, NULL); + if (IS_ERR(sdma->clk)) { + dev_err(dev, "failed to get a clock.\n"); + return PTR_ERR(sdma->clk); + } + ret = of_address_to_resource(dn, 0, &res); if (ret) { dev_err(dev, "Error parsing memory region!\n"); @@ -698,6 +706,8 @@ static int sirfsoc_dma_probe(struct platform_device *op) tasklet_init(&sdma->tasklet, sirfsoc_dma_tasklet, (unsigned long)sdma); + clk_prepare_enable(sdma->clk); + /* Register DMA engine */ dev_set_drvdata(dev, sdma); ret = dma_async_device_register(dma); @@ -720,6 +730,7 @@ static int sirfsoc_dma_remove(struct platform_device *op) struct device *dev = &op->dev; struct sirfsoc_dma *sdma = dev_get_drvdata(dev); + clk_disable_unprepare(sdma->clk); dma_async_device_unregister(&sdma->dma); free_irq(sdma->irq, sdma); irq_dispose_mapping(sdma->irq); @@ -742,7 +753,18 @@ static struct platform_driver sirfsoc_dma_driver = { }, }; -module_platform_driver(sirfsoc_dma_driver); +static __init int sirfsoc_dma_init(void) +{ + return platform_driver_register(&sirfsoc_dma_driver); +} + +static void __exit sirfsoc_dma_exit(void) +{ + platform_driver_unregister(&sirfsoc_dma_driver); +} + +subsys_initcall(sirfsoc_dma_init); +module_exit(sirfsoc_dma_exit); MODULE_AUTHOR("Rongjun Ying <rongjun.ying@csr.com>, " "Barry Song <baohua.song@csr.com>"); diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index fcee27e..ce19340 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -30,6 +30,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/clk/tegra.h> @@ -199,6 +200,7 @@ struct tegra_dma_channel { /* Channel-slave specific configuration */ struct dma_slave_config dma_sconfig; + struct tegra_dma_channel_regs channel_reg; }; /* tegra_dma: Tegra DMA specific information */ @@ -1213,7 +1215,6 @@ static const struct tegra_dma_chip_data tegra20_dma_chip_data = { .support_channel_pause = false, }; -#if defined(CONFIG_OF) /* Tegra30 specific DMA controller information */ static const struct tegra_dma_chip_data tegra30_dma_chip_data = { .nr_channels = 32, @@ -1243,7 +1244,6 @@ static const struct of_device_id tegra_dma_of_match[] = { }, }; MODULE_DEVICE_TABLE(of, tegra_dma_of_match); -#endif static int tegra_dma_probe(struct platform_device *pdev) { @@ -1252,20 +1252,14 @@ static int tegra_dma_probe(struct platform_device *pdev) int ret; int i; const struct tegra_dma_chip_data *cdata = NULL; + const struct of_device_id *match; - if (pdev->dev.of_node) { - const struct of_device_id *match; - match = of_match_device(of_match_ptr(tegra_dma_of_match), - &pdev->dev); - if (!match) { - dev_err(&pdev->dev, "Error: No device match found\n"); - return -ENODEV; - } - cdata = match->data; - } else { - /* If no device tree then fallback to tegra20 */ - cdata = &tegra20_dma_chip_data; + match = of_match_device(tegra_dma_of_match, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "Error: No device match found\n"); + return -ENODEV; } + cdata = match->data; tdma = devm_kzalloc(&pdev->dev, sizeof(*tdma) + cdata->nr_channels * sizeof(struct tegra_dma_channel), GFP_KERNEL); @@ -1448,11 +1442,74 @@ static int tegra_dma_runtime_resume(struct device *dev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int tegra_dma_pm_suspend(struct device *dev) +{ + struct tegra_dma *tdma = dev_get_drvdata(dev); + int i; + int ret; + + /* Enable clock before accessing register */ + ret = tegra_dma_runtime_resume(dev); + if (ret < 0) + return ret; + + tdma->reg_gen = tdma_read(tdma, TEGRA_APBDMA_GENERAL); + for (i = 0; i < tdma->chip_data->nr_channels; i++) { + struct tegra_dma_channel *tdc = &tdma->channels[i]; + struct tegra_dma_channel_regs *ch_reg = &tdc->channel_reg; + + ch_reg->csr = tdc_read(tdc, TEGRA_APBDMA_CHAN_CSR); + ch_reg->ahb_ptr = tdc_read(tdc, TEGRA_APBDMA_CHAN_AHBPTR); + ch_reg->apb_ptr = tdc_read(tdc, TEGRA_APBDMA_CHAN_APBPTR); + ch_reg->ahb_seq = tdc_read(tdc, TEGRA_APBDMA_CHAN_AHBSEQ); + ch_reg->apb_seq = tdc_read(tdc, TEGRA_APBDMA_CHAN_APBSEQ); + } + + /* Disable clock */ + tegra_dma_runtime_suspend(dev); + return 0; +} + +static int tegra_dma_pm_resume(struct device *dev) +{ + struct tegra_dma *tdma = dev_get_drvdata(dev); + int i; + int ret; + + /* Enable clock before accessing register */ + ret = tegra_dma_runtime_resume(dev); + if (ret < 0) + return ret; + + tdma_write(tdma, TEGRA_APBDMA_GENERAL, tdma->reg_gen); + tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0); + tdma_write(tdma, TEGRA_APBDMA_IRQ_MASK_SET, 0xFFFFFFFFul); + + for (i = 0; i < tdma->chip_data->nr_channels; i++) { + struct tegra_dma_channel *tdc = &tdma->channels[i]; + struct tegra_dma_channel_regs *ch_reg = &tdc->channel_reg; + + tdc_write(tdc, TEGRA_APBDMA_CHAN_APBSEQ, ch_reg->apb_seq); + tdc_write(tdc, TEGRA_APBDMA_CHAN_APBPTR, ch_reg->apb_ptr); + tdc_write(tdc, TEGRA_APBDMA_CHAN_AHBSEQ, ch_reg->ahb_seq); + tdc_write(tdc, TEGRA_APBDMA_CHAN_AHBPTR, ch_reg->ahb_ptr); + tdc_write(tdc, TEGRA_APBDMA_CHAN_CSR, + (ch_reg->csr & ~TEGRA_APBDMA_CSR_ENB)); + } + + /* Disable clock */ + tegra_dma_runtime_suspend(dev); + return 0; +} +#endif + static const struct dev_pm_ops tegra_dma_dev_pm_ops = { #ifdef CONFIG_PM_RUNTIME .runtime_suspend = tegra_dma_runtime_suspend, .runtime_resume = tegra_dma_runtime_resume, #endif + SET_SYSTEM_SLEEP_PM_OPS(tegra_dma_pm_suspend, tegra_dma_pm_resume) }; static struct platform_driver tegra_dmac_driver = { @@ -1460,7 +1517,7 @@ static struct platform_driver tegra_dmac_driver = { .name = "tegra-apbdma", .owner = THIS_MODULE, .pm = &tegra_dma_dev_pm_ops, - .of_match_table = of_match_ptr(tegra_dma_of_match), + .of_match_table = tegra_dma_of_match, }, .probe = tegra_dma_probe, .remove = tegra_dma_remove, diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c index 952f823..26107ba 100644 --- a/drivers/dma/timb_dma.c +++ b/drivers/dma/timb_dma.c @@ -823,7 +823,7 @@ static struct platform_driver td_driver = { .owner = THIS_MODULE, }, .probe = td_probe, - .remove = __exit_p(td_remove), + .remove = td_remove, }; module_platform_driver(td_driver); diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index 913f55c..a59fb48 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -1190,7 +1190,7 @@ static int __init txx9dmac_chan_probe(struct platform_device *pdev) return 0; } -static int __exit txx9dmac_chan_remove(struct platform_device *pdev) +static int txx9dmac_chan_remove(struct platform_device *pdev) { struct txx9dmac_chan *dc = platform_get_drvdata(pdev); @@ -1252,7 +1252,7 @@ static int __init txx9dmac_probe(struct platform_device *pdev) return 0; } -static int __exit txx9dmac_remove(struct platform_device *pdev) +static int txx9dmac_remove(struct platform_device *pdev) { struct txx9dmac_dev *ddev = platform_get_drvdata(pdev); @@ -1299,14 +1299,14 @@ static const struct dev_pm_ops txx9dmac_dev_pm_ops = { }; static struct platform_driver txx9dmac_chan_driver = { - .remove = __exit_p(txx9dmac_chan_remove), + .remove = txx9dmac_chan_remove, .driver = { .name = "txx9dmac-chan", }, }; static struct platform_driver txx9dmac_driver = { - .remove = __exit_p(txx9dmac_remove), + .remove = txx9dmac_remove, .shutdown = txx9dmac_shutdown, .driver = { .name = "txx9dmac", diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 5168a13..3297301 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -16,7 +16,7 @@ comment "Extcon Device Drivers" config EXTCON_GPIO tristate "GPIO extcon support" - depends on GENERIC_GPIO + depends on GPIOLIB help Say Y here to enable GPIO based extcon support. Note that GPIO extcon supports single state per extcon instance. diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index c22eed9..87d5670 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -38,7 +38,6 @@ config GPIO_DEVRES menuconfig GPIOLIB bool "GPIO Support" depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help This enables GPIO support through the generic GPIO library. You only need to enable this, if you also want to enable diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index dda6a75..90a80eb 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -255,7 +255,7 @@ static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group, } /* - * GENERIC_GPIO primitives. + * GPIO primitives. */ static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip, unsigned pin) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index adfee98..631736e 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -363,7 +363,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ config I2C_CBUS_GPIO tristate "CBUS I2C driver" - depends on GENERIC_GPIO + depends on GPIOLIB help Support for CBUS access using I2C API. Mostly relevant for Nokia Internet Tablets (770, N800 and N810). @@ -436,7 +436,7 @@ config I2C_EG20T config I2C_GPIO tristate "GPIO-based bitbanging I2C" - depends on GENERIC_GPIO + depends on GPIOLIB select I2C_ALGOBIT help This is a very simple bitbanging I2C driver utilizing the diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index 5faf244..f7f9865 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -7,7 +7,7 @@ menu "Multiplexer I2C Chip support" config I2C_ARB_GPIO_CHALLENGE tristate "GPIO-based I2C arbitration" - depends on GENERIC_GPIO && OF + depends on GPIOLIB && OF help If you say yes to this option, support will be included for an I2C multimaster arbitration scheme using GPIOs and a challenge & @@ -19,7 +19,7 @@ config I2C_ARB_GPIO_CHALLENGE config I2C_MUX_GPIO tristate "GPIO-based I2C multiplexer" - depends on GENERIC_GPIO + depends on GPIOLIB help If you say yes to this option, support will be included for a GPIO based I2C multiplexer. This driver provides access to diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 6a195d5..62a2c0e 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -175,7 +175,7 @@ config KEYBOARD_EP93XX config KEYBOARD_GPIO tristate "GPIO Buttons" - depends on GENERIC_GPIO + depends on GPIOLIB help This driver implements support for buttons connected to GPIO pins of various CPUs (and some other chips). @@ -190,7 +190,7 @@ config KEYBOARD_GPIO config KEYBOARD_GPIO_POLLED tristate "Polled GPIO buttons" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver implements support for buttons connected @@ -241,7 +241,7 @@ config KEYBOARD_TCA8418 config KEYBOARD_MATRIX tristate "GPIO driven matrix keypad support" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_MATRIXKMAP help Enable support for GPIO driven matrix keypad. diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index af80928..bb698e1 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -214,7 +214,7 @@ config INPUT_APANEL config INPUT_GP2A tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver" depends on I2C - depends on GENERIC_GPIO + depends on GPIOLIB help Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip hooked to an I2C bus. @@ -224,7 +224,7 @@ config INPUT_GP2A config INPUT_GPIO_TILT_POLLED tristate "Polled GPIO tilt switch" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver implements support for tilt switches connected @@ -472,7 +472,7 @@ config INPUT_PWM_BEEPER config INPUT_GPIO_ROTARY_ENCODER tristate "Rotary encoders connected to GPIO pins" - depends on GPIOLIB && GENERIC_GPIO + depends on GPIOLIB help Say Y here to add support for rotary encoders connected to GPIO lines. Check file:Documentation/input/rotary-encoder.txt for more @@ -484,7 +484,7 @@ config INPUT_GPIO_ROTARY_ENCODER config INPUT_RB532_BUTTON tristate "Mikrotik Routerboard 532 button interface" depends on MIKROTIK_RB532 - depends on GPIOLIB && GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help Say Y here if you want support for the S1 button built into diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 802bd6a..effa9c5 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -295,7 +295,7 @@ config MOUSE_VSXXXAA config MOUSE_GPIO tristate "GPIO mouse" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver simulates a mouse on GPIO lines of various CPUs (and some diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index d44806d..ef99229 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -173,7 +173,7 @@ config LEDS_PCA9532_GPIO config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs @@ -362,7 +362,7 @@ config LEDS_INTEL_SS4200 config LEDS_LT3593 tristate "LED driver for LT3593 controllers" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for LEDs driven by a Linear Technology LT3593 controller. This controller uses a special one-wire pulse @@ -431,7 +431,7 @@ config LEDS_ASIC3 config LEDS_RENESAS_TPU bool "LED support for Renesas TPU" - depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO + depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB help This option enables build of the LED TPU platform driver, suitable to drive any TPU channel on newer Renesas SoCs. diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 3ed17c4..c269383 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -419,7 +419,7 @@ config MTD_BFIN_ASYNC config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" - depends on GENERIC_GPIO || GPIOLIB + depends on GPIOLIB depends on MTD_COMPLEX_MAPPINGS help Map driver which allows flashes to be partially physically addressed diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 81bf5e5..5d54ad3 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -89,7 +89,7 @@ config MTD_NAND_H1900 config MTD_NAND_GPIO tristate "GPIO NAND Flash driver" - depends on GENERIC_GPIO && ARM + depends on GPIOLIB && ARM help This enables a GPIO based NAND flash driver. diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 4503452..1e11f2b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -126,7 +126,7 @@ config MDIO_BITBANG config MDIO_GPIO tristate "Support for GPIO lib-based bitbanged MDIO buses" - depends on MDIO_BITBANG && GENERIC_GPIO + depends on MDIO_BITBANG && GPIOLIB ---help--- Supports GPIO lib-based MDIO busses. diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig index 0e1f99c..f8a2ae4 100644 --- a/drivers/pinctrl/sh-pfc/Kconfig +++ b/drivers/pinctrl/sh-pfc/Kconfig @@ -6,7 +6,7 @@ if ARCH_SHMOBILE || SUPERH config PINCTRL_SH_PFC # XXX move off the gpio dependency - depends on GENERIC_GPIO + depends on GPIOLIB select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB select PINMUX select PINCONF @@ -40,19 +40,19 @@ config PINCTRL_PFC_R8A7779 config PINCTRL_PFC_SH7203 def_bool y depends on CPU_SUBTYPE_SH7203 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7264 def_bool y depends on CPU_SUBTYPE_SH7264 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7269 def_bool y depends on CPU_SUBTYPE_SH7269 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7372 @@ -68,55 +68,55 @@ config PINCTRL_PFC_SH73A0 config PINCTRL_PFC_SH7720 def_bool y depends on CPU_SUBTYPE_SH7720 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7722 def_bool y depends on CPU_SUBTYPE_SH7722 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7723 def_bool y depends on CPU_SUBTYPE_SH7723 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7724 def_bool y depends on CPU_SUBTYPE_SH7724 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7734 def_bool y depends on CPU_SUBTYPE_SH7734 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7757 def_bool y depends on CPU_SUBTYPE_SH7757 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7785 def_bool y depends on CPU_SUBTYPE_SH7785 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7786 def_bool y depends on CPU_SUBTYPE_SH7786 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SHX3 def_bool y depends on CPU_SUBTYPE_SHX3 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC endif diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a5d97ea..8bb2644 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -66,7 +66,7 @@ config REGULATOR_USERSPACE_CONSUMER config REGULATOR_GPIO tristate "GPIO regulator support" - depends on GENERIC_GPIO + depends on GPIOLIB help This driver provides support for regulators that can be controlled via gpios. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 141d8c1..92a9345 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -62,7 +62,7 @@ config SPI_ALTERA config SPI_ATH79 tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" - depends on ATH79 && GENERIC_GPIO + depends on ATH79 && GPIOLIB select SPI_BITBANG help This enables support for the SPI controller present on the @@ -175,7 +175,7 @@ config SPI_FALCON config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" - depends on GENERIC_GPIO + depends on GPIOLIB select SPI_BITBANG help This simple GPIO bitbanging SPI master uses the arch-neutral GPIO @@ -259,7 +259,7 @@ config SPI_FSL_ESPI config SPI_OC_TINY tristate "OpenCores tiny SPI" - depends on GENERIC_GPIO + depends on GPIOLIB select SPI_BITBANG help This is the driver for OpenCores tiny SPI master controller. @@ -457,7 +457,7 @@ config SPI_TOPCLIFF_PCH config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" - depends on GENERIC_GPIO && CPU_TX49XX + depends on GPIOLIB && CPU_TX49XX help SPI driver for Toshiba TXx9 MIPS SoCs diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 9f61d46..c0c95be 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -54,7 +54,7 @@ config ANDROID_TIMED_OUTPUT config ANDROID_TIMED_GPIO tristate "Android timed gpio driver" - depends on GENERIC_GPIO && ANDROID_TIMED_OUTPUT + depends on GPIOLIB && ANDROID_TIMED_OUTPUT default n config ANDROID_LOW_MEMORY_KILLER diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig index e2e786d..ad45dfb 100644 --- a/drivers/staging/iio/accel/Kconfig +++ b/drivers/staging/iio/accel/Kconfig @@ -61,7 +61,7 @@ config LIS3L02DQ depends on SPI select IIO_TRIGGER if IIO_BUFFER depends on !IIO_BUFFER || IIO_KFIFO_BUF - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build SPI support for the ST microelectronics accelerometer. The driver supplies direct access via sysfs files diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index d990829..cabc7a3 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -73,7 +73,7 @@ config AD7780 config AD7816 tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" depends on SPI - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices AD7816/7/8 temperature sensors and ADC. diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig index 698a897..e6795e0 100644 --- a/drivers/staging/iio/addac/Kconfig +++ b/drivers/staging/iio/addac/Kconfig @@ -5,7 +5,7 @@ menu "Analog digital bi-direction converters" config ADT7316 tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver" - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318 and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC. diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig index 49f69ef..ce360f1 100644 --- a/drivers/staging/iio/resolver/Kconfig +++ b/drivers/staging/iio/resolver/Kconfig @@ -13,7 +13,7 @@ config AD2S90 config AD2S1200 tristate "Analog Devices ad2s1200/ad2s1205 driver" depends on SPI - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1200 and ad2s1205, provides direct access @@ -22,7 +22,7 @@ config AD2S1200 config AD2S1210 tristate "Analog Devices ad2s1210 driver" depends on SPI - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1210, provides direct access via sysfs. diff --git a/drivers/staging/iio/trigger/Kconfig b/drivers/staging/iio/trigger/Kconfig index d44d3ad..1a051da 100644 --- a/drivers/staging/iio/trigger/Kconfig +++ b/drivers/staging/iio/trigger/Kconfig @@ -14,7 +14,7 @@ config IIO_PERIODIC_RTC_TRIGGER config IIO_GPIO_TRIGGER tristate "GPIO trigger" - depends on GENERIC_GPIO + depends on GPIOLIB help Provides support for using GPIO pins as IIO triggers. diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index a764f16..5e3c025 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -67,15 +67,16 @@ config THERMAL_GOV_USER_SPACE Enable this to let the user space manage the platform thermals. config CPU_THERMAL - tristate "generic cpu cooling support" + bool "generic cpu cooling support" depends on CPU_FREQ select CPU_FREQ_TABLE help This implements the generic cpu cooling mechanism through frequency - reduction, cpu hotplug and any other ways of reducing temperature. An - ACPI version of this already exists(drivers/acpi/processor_thermal.c). + reduction. An ACPI version of this already exists + (drivers/acpi/processor_thermal.c). This will be useful for platforms using the generic thermal interface and not the ACPI interface. + If you want this support, you should say Y here. config THERMAL_EMULATION @@ -86,6 +87,10 @@ config THERMAL_EMULATION user can manually input temperature and test the different trip threshold behaviour for simulation purpose. + WARNING: Be careful while enabling this option on production systems, + because userland can easily disable the thermal policy by simply + flooding this sysfs node with low temperature values. + config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on PLAT_SPEAR @@ -117,15 +122,6 @@ config EXYNOS_THERMAL If you say yes here you get support for TMU (Thermal Management Unit) on SAMSUNG EXYNOS series of SoC. -config EXYNOS_THERMAL_EMUL - bool "EXYNOS TMU emulation mode support" - depends on EXYNOS_THERMAL - help - Exynos 4412 and 4414 and 5 series has emulation mode on TMU. - Enable this option will be make sysfs node in exynos thermal platform - device directory to support emulation mode. With emulation mode sysfs - node, you can manually input temperature to TMU for simulation purpose. - config DOVE_THERMAL tristate "Temperature sensor on Marvell Dove SoCs" depends on ARCH_DOVE @@ -144,6 +140,14 @@ config DB8500_THERMAL created. Cooling devices can be bound to the trip points to cool this thermal zone if trip points reached. +config ARMADA_THERMAL + tristate "Armada 370/XP thermal management" + depends on ARCH_MVEBU + depends on OF + help + Enable this option if you want to have support for thermal management + controller present in Armada 370 and Armada XP SoC. + config DB8500_CPUFREQ_COOLING tristate "DB8500 cpufreq cooling" depends on ARCH_U8500 diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index d3a2b38..c054d41 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,14 +3,15 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +thermal_sys-y += thermal_core.o # governors -obj-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o -obj-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o -obj-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o +thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o +thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o +thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o # cpufreq cooling -obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o +thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o # platform thermal drivers obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o @@ -19,6 +20,7 @@ obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o +obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c new file mode 100644 index 0000000..5b4d75f --- /dev/null +++ b/drivers/thermal/armada_thermal.c @@ -0,0 +1,232 @@ +/* + * Marvell Armada 370/XP thermal sensor driver + * + * Copyright (C) 2013 Marvell + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/of_device.h> +#include <linux/thermal.h> + +#define THERMAL_VALID_OFFSET 9 +#define THERMAL_VALID_MASK 0x1 +#define THERMAL_TEMP_OFFSET 10 +#define THERMAL_TEMP_MASK 0x1ff + +/* Thermal Manager Control and Status Register */ +#define PMU_TDC0_SW_RST_MASK (0x1 << 1) +#define PMU_TM_DISABLE_OFFS 0 +#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS) +#define PMU_TDC0_REF_CAL_CNT_OFFS 11 +#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS) +#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30) +#define PMU_TDC0_START_CAL_MASK (0x1 << 25) + +struct armada_thermal_ops; + +/* Marvell EBU Thermal Sensor Dev Structure */ +struct armada_thermal_priv { + void __iomem *sensor; + void __iomem *control; + struct armada_thermal_ops *ops; +}; + +struct armada_thermal_ops { + /* Initialize the sensor */ + void (*init_sensor)(struct armada_thermal_priv *); + + /* Test for a valid sensor value (optional) */ + bool (*is_valid)(struct armada_thermal_priv *); +}; + +static void armadaxp_init_sensor(struct armada_thermal_priv *priv) +{ + unsigned long reg; + + reg = readl_relaxed(priv->control); + reg |= PMU_TDC0_OTF_CAL_MASK; + writel(reg, priv->control); + + /* Reference calibration value */ + reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; + reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); + writel(reg, priv->control); + + /* Reset the sensor */ + reg = readl_relaxed(priv->control); + writel((reg | PMU_TDC0_SW_RST_MASK), priv->control); + + writel(reg, priv->control); + + /* Enable the sensor */ + reg = readl_relaxed(priv->sensor); + reg &= ~PMU_TM_DISABLE_MASK; + writel(reg, priv->sensor); +} + +static void armada370_init_sensor(struct armada_thermal_priv *priv) +{ + unsigned long reg; + + reg = readl_relaxed(priv->control); + reg |= PMU_TDC0_OTF_CAL_MASK; + writel(reg, priv->control); + + /* Reference calibration value */ + reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; + reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); + writel(reg, priv->control); + + reg &= ~PMU_TDC0_START_CAL_MASK; + writel(reg, priv->control); + + mdelay(10); +} + +static bool armada_is_valid(struct armada_thermal_priv *priv) +{ + unsigned long reg = readl_relaxed(priv->sensor); + + return (reg >> THERMAL_VALID_OFFSET) & THERMAL_VALID_MASK; +} + +static int armada_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct armada_thermal_priv *priv = thermal->devdata; + unsigned long reg; + + /* Valid check */ + if (priv->ops->is_valid && !priv->ops->is_valid(priv)) { + dev_err(&thermal->device, + "Temperature sensor reading not valid\n"); + return -EIO; + } + + reg = readl_relaxed(priv->sensor); + reg = (reg >> THERMAL_TEMP_OFFSET) & THERMAL_TEMP_MASK; + *temp = (3153000000UL - (10000000UL*reg)) / 13825; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = armada_get_temp, +}; + +static const struct armada_thermal_ops armadaxp_ops = { + .init_sensor = armadaxp_init_sensor, +}; + +static const struct armada_thermal_ops armada370_ops = { + .is_valid = armada_is_valid, + .init_sensor = armada370_init_sensor, +}; + +static const struct of_device_id armada_thermal_id_table[] = { + { + .compatible = "marvell,armadaxp-thermal", + .data = &armadaxp_ops, + }, + { + .compatible = "marvell,armada370-thermal", + .data = &armada370_ops, + }, + { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, armada_thermal_id_table); + +static int armada_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *thermal; + const struct of_device_id *match; + struct armada_thermal_priv *priv; + struct resource *res; + + match = of_match_device(armada_thermal_id_table, &pdev->dev); + if (!match) + return -ENODEV; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get platform resource\n"); + return -ENODEV; + } + + priv->sensor = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->sensor)) + return PTR_ERR(priv->sensor); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "Failed to get platform resource\n"); + return -ENODEV; + } + + priv->control = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->control)) + return PTR_ERR(priv->control); + + priv->ops = (struct armada_thermal_ops *)match->data; + priv->ops->init_sensor(priv); + + thermal = thermal_zone_device_register("armada_thermal", 0, 0, + priv, &ops, NULL, 0, 0); + if (IS_ERR(thermal)) { + dev_err(&pdev->dev, + "Failed to register thermal zone device\n"); + return PTR_ERR(thermal); + } + + platform_set_drvdata(pdev, thermal); + + return 0; +} + +static int armada_thermal_exit(struct platform_device *pdev) +{ + struct thermal_zone_device *armada_thermal = + platform_get_drvdata(pdev); + + thermal_zone_device_unregister(armada_thermal); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver armada_thermal_driver = { + .probe = armada_thermal_probe, + .remove = armada_thermal_exit, + .driver = { + .name = "armada_thermal", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(armada_thermal_id_table), + }, +}; + +module_platform_driver(armada_thermal_driver); + +MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>"); +MODULE_DESCRIPTION("Armada 370/XP thermal driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 8dc44cb..c94bf2e 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -20,10 +20,8 @@ * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -#include <linux/kernel.h> #include <linux/module.h> #include <linux/thermal.h> -#include <linux/platform_device.h> #include <linux/cpufreq.h> #include <linux/err.h> #include <linux/slab.h> @@ -31,21 +29,19 @@ #include <linux/cpu_cooling.h> /** - * struct cpufreq_cooling_device + * struct cpufreq_cooling_device - data for cooling device with cpufreq * @id: unique integer value corresponding to each cpufreq_cooling_device * registered. - * @cool_dev: thermal_cooling_device pointer to keep track of the the - * egistered cooling device. + * @cool_dev: thermal_cooling_device pointer to keep track of the + * registered cooling device. * @cpufreq_state: integer value representing the current state of cpufreq * cooling devices. * @cpufreq_val: integer value representing the absolute value of the clipped * frequency. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. - * @node: list_head to link all cpufreq_cooling_device together. * * This structure is required for keeping information of each - * cpufreq_cooling_device registered as a list whose head is represented by - * cooling_cpufreq_list. In order to prevent corruption of this list a + * cpufreq_cooling_device registered. In order to prevent corruption of this a * mutex lock cooling_cpufreq_lock is used. */ struct cpufreq_cooling_device { @@ -54,9 +50,7 @@ struct cpufreq_cooling_device { unsigned int cpufreq_state; unsigned int cpufreq_val; struct cpumask allowed_cpus; - struct list_head node; }; -static LIST_HEAD(cooling_cpufreq_list); static DEFINE_IDR(cpufreq_idr); static DEFINE_MUTEX(cooling_cpufreq_lock); @@ -70,6 +64,11 @@ static struct cpufreq_cooling_device *notify_device; * get_idr - function to get a unique id. * @idr: struct idr * handle used to create a id. * @id: int * value generated by this function. + * + * This function will populate @id with an unique + * id, using the idr API. + * + * Return: 0 on success, an error code on failure. */ static int get_idr(struct idr *idr, int *id) { @@ -81,6 +80,7 @@ static int get_idr(struct idr *idr, int *id) if (unlikely(ret < 0)) return ret; *id = ret; + return 0; } @@ -99,63 +99,162 @@ static void release_idr(struct idr *idr, int id) /* Below code defines functions to be used for cpufreq as cooling device */ /** - * is_cpufreq_valid - function to check if a cpu has frequency transition policy. + * is_cpufreq_valid - function to check frequency transitioning capability. * @cpu: cpu for which check is needed. + * + * This function will check the current state of the system if + * it is capable of changing the frequency for a given @cpu. + * + * Return: 0 if the system is not currently capable of changing + * the frequency of given cpu. !0 in case the frequency is changeable. */ static int is_cpufreq_valid(int cpu) { struct cpufreq_policy policy; + return !cpufreq_get_policy(&policy, cpu); } +enum cpufreq_cooling_property { + GET_LEVEL, + GET_FREQ, + GET_MAXL, +}; + /** - * get_cpu_frequency - get the absolute value of frequency from level. - * @cpu: cpu for which frequency is fetched. - * @level: level of frequency, equals cooling state of cpu cooling device - * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc + * get_property - fetch a property of interest for a give cpu. + * @cpu: cpu for which the property is required + * @input: query parameter + * @output: query return + * @property: type of query (frequency, level, max level) + * + * This is the common function to + * 1. get maximum cpu cooling states + * 2. translate frequency to cooling state + * 3. translate cooling state to frequency + * Note that the code may be not in good shape + * but it is written in this way in order to: + * a) reduce duplicate code as most of the code can be shared. + * b) make sure the logic is consistent when translating between + * cooling states and frequencies. + * + * Return: 0 on success, -EINVAL when invalid parameters are passed. */ -static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level) +static int get_property(unsigned int cpu, unsigned long input, + unsigned int *output, + enum cpufreq_cooling_property property) { - int ret = 0, i = 0; - unsigned long level_index; - bool descend = false; + int i, j; + unsigned long max_level = 0, level = 0; + unsigned int freq = CPUFREQ_ENTRY_INVALID; + int descend = -1; struct cpufreq_frequency_table *table = cpufreq_frequency_get_table(cpu); + + if (!output) + return -EINVAL; + if (!table) - return ret; + return -EINVAL; - while (table[i].frequency != CPUFREQ_TABLE_END) { + for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) { + /* ignore invalid entries */ if (table[i].frequency == CPUFREQ_ENTRY_INVALID) continue; - /*check if table in ascending or descending order*/ - if ((table[i + 1].frequency != CPUFREQ_TABLE_END) && - (table[i + 1].frequency < table[i].frequency) - && !descend) { - descend = true; - } + /* ignore duplicate entry */ + if (freq == table[i].frequency) + continue; + + /* get the frequency order */ + if (freq != CPUFREQ_ENTRY_INVALID && descend != -1) + descend = !!(freq > table[i].frequency); - /*return if level matched and table in descending order*/ - if (descend && i == level) - return table[i].frequency; - i++; + freq = table[i].frequency; + max_level++; } - i--; - if (level > i || descend) - return ret; - level_index = i - level; + /* get max level */ + if (property == GET_MAXL) { + *output = (unsigned int)max_level; + return 0; + } - /*Scan the table in reverse order and match the level*/ - while (i >= 0) { + if (property == GET_FREQ) + level = descend ? input : (max_level - input - 1); + + for (i = 0, j = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) { + /* ignore invalid entry */ if (table[i].frequency == CPUFREQ_ENTRY_INVALID) continue; - /*return if level matched*/ - if (i == level_index) - return table[i].frequency; - i--; + + /* ignore duplicate entry */ + if (freq == table[i].frequency) + continue; + + /* now we have a valid frequency entry */ + freq = table[i].frequency; + + if (property == GET_LEVEL && (unsigned int)input == freq) { + /* get level by frequency */ + *output = descend ? j : (max_level - j - 1); + return 0; + } + if (property == GET_FREQ && level == j) { + /* get frequency by level */ + *output = freq; + return 0; + } + j++; } - return ret; + + return -EINVAL; +} + +/** + * cpufreq_cooling_get_level - for a give cpu, return the cooling level. + * @cpu: cpu for which the level is required + * @freq: the frequency of interest + * + * This function will match the cooling level corresponding to the + * requested @freq and return it. + * + * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID + * otherwise. + */ +unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq) +{ + unsigned int val; + + if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL)) + return THERMAL_CSTATE_INVALID; + + return (unsigned long)val; +} +EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level); + +/** + * get_cpu_frequency - get the absolute value of frequency from level. + * @cpu: cpu for which frequency is fetched. + * @level: cooling level + * + * This function matches cooling level with frequency. Based on a cooling level + * of frequency, equals cooling state of cpu cooling device, it will return + * the corresponding frequency. + * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc + * + * Return: 0 on error, the corresponding frequency otherwise. + */ +static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level) +{ + int ret = 0; + unsigned int freq; + + ret = get_property(cpu, level, &freq, GET_FREQ); + if (ret) + return 0; + + return freq; } /** @@ -163,13 +262,19 @@ static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level) * @cpufreq_device: cpufreq_cooling_device pointer containing frequency * clipping data. * @cooling_state: value of the cooling state. + * + * Function used to make sure the cpufreq layer is aware of current thermal + * limits. The limits are applied by updating the cpufreq policy. + * + * Return: 0 on success, an error code otherwise (-EINVAL in case wrong + * cooling state). */ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, - unsigned long cooling_state) + unsigned long cooling_state) { unsigned int cpuid, clip_freq; - struct cpumask *maskPtr = &cpufreq_device->allowed_cpus; - unsigned int cpu = cpumask_any(maskPtr); + struct cpumask *mask = &cpufreq_device->allowed_cpus; + unsigned int cpu = cpumask_any(mask); /* Check if the old cooling action is same as new cooling action */ @@ -184,7 +289,7 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, cpufreq_device->cpufreq_val = clip_freq; notify_device = cpufreq_device; - for_each_cpu(cpuid, maskPtr) { + for_each_cpu(cpuid, mask) { if (is_cpufreq_valid(cpuid)) cpufreq_update_policy(cpuid); } @@ -199,9 +304,15 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, * @nb: struct notifier_block * with callback info. * @event: value showing cpufreq event for which this function invoked. * @data: callback-specific data + * + * Callback to highjack the notification on cpufreq policy transition. + * Every time there is a change in policy, we will intercept and + * update the cpufreq policy with thermal constraints. + * + * Return: 0 (success) */ static int cpufreq_thermal_notifier(struct notifier_block *nb, - unsigned long event, void *data) + unsigned long event, void *data) { struct cpufreq_policy *policy = data; unsigned long max_freq = 0; @@ -212,7 +323,7 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, if (cpumask_test_cpu(policy->cpu, ¬ify_device->allowed_cpus)) max_freq = notify_device->cpufreq_val; - /* Never exceed user_policy.max*/ + /* Never exceed user_policy.max */ if (max_freq > policy->user_policy.max) max_freq = policy->user_policy.max; @@ -222,50 +333,46 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, return 0; } -/* - * cpufreq cooling device callback functions are defined below - */ +/* cpufreq cooling device callback functions are defined below */ /** * cpufreq_get_max_state - callback function to get the max cooling state. * @cdev: thermal cooling device pointer. * @state: fill this variable with the max cooling state. + * + * Callback for the thermal cooling device to return the cpufreq + * max cooling state. + * + * Return: 0 on success, an error code otherwise. */ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; - struct cpumask *maskPtr = &cpufreq_device->allowed_cpus; + struct cpumask *mask = &cpufreq_device->allowed_cpus; unsigned int cpu; - struct cpufreq_frequency_table *table; - unsigned long count = 0; - int i = 0; - - cpu = cpumask_any(maskPtr); - table = cpufreq_frequency_get_table(cpu); - if (!table) { - *state = 0; - return 0; - } + unsigned int count = 0; + int ret; - for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { - if (table[i].frequency == CPUFREQ_ENTRY_INVALID) - continue; - count++; - } + cpu = cpumask_any(mask); - if (count > 0) { - *state = --count; - return 0; - } + ret = get_property(cpu, 0, &count, GET_MAXL); - return -EINVAL; + if (count > 0) + *state = count; + + return ret; } /** * cpufreq_get_cur_state - callback function to get the current cooling state. * @cdev: thermal cooling device pointer. * @state: fill this variable with the current cooling state. + * + * Callback for the thermal cooling device to return the cpufreq + * current cooling state. + * + * Return: 0 on success, an error code otherwise. */ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state) @@ -273,6 +380,7 @@ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; *state = cpufreq_device->cpufreq_state; + return 0; } @@ -280,6 +388,11 @@ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, * cpufreq_set_cur_state - callback function to set the current cooling state. * @cdev: thermal cooling device pointer. * @state: set this variable to the current cooling state. + * + * Callback for the thermal cooling device to change the cpufreq + * current cooling state. + * + * Return: 0 on success, an error code otherwise. */ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) @@ -304,9 +417,16 @@ static struct notifier_block thermal_cpufreq_notifier_block = { /** * cpufreq_cooling_register - function to create cpufreq cooling device. * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * + * This interface function registers the cpufreq cooling device with the name + * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq + * cooling devices. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). */ -struct thermal_cooling_device *cpufreq_cooling_register( - const struct cpumask *clip_cpus) +struct thermal_cooling_device * +cpufreq_cooling_register(const struct cpumask *clip_cpus) { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev = NULL; @@ -315,9 +435,9 @@ struct thermal_cooling_device *cpufreq_cooling_register( int ret = 0, i; struct cpufreq_policy policy; - /*Verify that all the clip cpus have same freq_min, freq_max limit*/ + /* Verify that all the clip cpus have same freq_min, freq_max limit */ for_each_cpu(i, clip_cpus) { - /*continue if cpufreq policy not found and not return error*/ + /* continue if cpufreq policy not found and not return error */ if (!cpufreq_get_policy(&policy, i)) continue; if (min == 0 && max == 0) { @@ -325,12 +445,12 @@ struct thermal_cooling_device *cpufreq_cooling_register( max = policy.cpuinfo.max_freq; } else { if (min != policy.cpuinfo.min_freq || - max != policy.cpuinfo.max_freq) + max != policy.cpuinfo.max_freq) return ERR_PTR(-EINVAL); } } cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device), - GFP_KERNEL); + GFP_KERNEL); if (!cpufreq_dev) return ERR_PTR(-ENOMEM); @@ -342,10 +462,11 @@ struct thermal_cooling_device *cpufreq_cooling_register( return ERR_PTR(-EINVAL); } - sprintf(dev_name, "thermal-cpufreq-%d", cpufreq_dev->id); + snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", + cpufreq_dev->id); cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev, - &cpufreq_cooling_ops); + &cpufreq_cooling_ops); if (!cool_dev) { release_idr(&cpufreq_idr, cpufreq_dev->id); kfree(cpufreq_dev); @@ -358,17 +479,20 @@ struct thermal_cooling_device *cpufreq_cooling_register( /* Register the notifier for first cpufreq cooling device */ if (cpufreq_dev_count == 0) cpufreq_register_notifier(&thermal_cpufreq_notifier_block, - CPUFREQ_POLICY_NOTIFIER); + CPUFREQ_POLICY_NOTIFIER); cpufreq_dev_count++; mutex_unlock(&cooling_cpufreq_lock); + return cool_dev; } -EXPORT_SYMBOL(cpufreq_cooling_register); +EXPORT_SYMBOL_GPL(cpufreq_cooling_register); /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. + * + * This interface function unregisters the "thermal-cpufreq-%x" cooling device. */ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { @@ -378,14 +502,13 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) cpufreq_dev_count--; /* Unregister the notifier for the last cpufreq cooling device */ - if (cpufreq_dev_count == 0) { + if (cpufreq_dev_count == 0) cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block, - CPUFREQ_POLICY_NOTIFIER); - } + CPUFREQ_POLICY_NOTIFIER); mutex_unlock(&cooling_cpufreq_lock); thermal_cooling_device_unregister(cpufreq_dev->cool_dev); release_idr(&cpufreq_idr, cpufreq_dev->id); kfree(cpufreq_dev); } -EXPORT_SYMBOL(cpufreq_cooling_unregister); +EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister); diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c index 2141985..786d192 100644 --- a/drivers/thermal/db8500_cpufreq_cooling.c +++ b/drivers/thermal/db8500_cpufreq_cooling.c @@ -37,7 +37,7 @@ static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) cpumask_set_cpu(0, &mask_val); cdev = cpufreq_cooling_register(&mask_val); - if (IS_ERR_OR_NULL(cdev)) { + if (IS_ERR(cdev)) { dev_err(&pdev->dev, "Failed to register cooling device\n"); return PTR_ERR(cdev); } diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index 61ce60a..1e3b3bf 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -419,7 +419,8 @@ static int db8500_thermal_probe(struct platform_device *pdev) low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); if (low_irq < 0) { dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n"); - return low_irq; + ret = low_irq; + goto out_unlock; } ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL, @@ -427,13 +428,14 @@ static int db8500_thermal_probe(struct platform_device *pdev) "dbx500_temp_low", pzone); if (ret < 0) { dev_err(&pdev->dev, "Failed to allocate temp low irq.\n"); - return ret; + goto out_unlock; } high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); if (high_irq < 0) { dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n"); - return high_irq; + ret = high_irq; + goto out_unlock; } ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL, @@ -441,15 +443,16 @@ static int db8500_thermal_probe(struct platform_device *pdev) "dbx500_temp_high", pzone); if (ret < 0) { dev_err(&pdev->dev, "Failed to allocate temp high irq.\n"); - return ret; + goto out_unlock; } pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone", ptrips->num_trips, 0, pzone, &thdev_ops, NULL, 0, 0); - if (IS_ERR_OR_NULL(pzone->therm_dev)) { + if (IS_ERR(pzone->therm_dev)) { dev_err(&pdev->dev, "Register thermal zone device failed.\n"); - return PTR_ERR(pzone->therm_dev); + ret = PTR_ERR(pzone->therm_dev); + goto out_unlock; } dev_info(&pdev->dev, "Thermal zone device registered.\n"); @@ -461,9 +464,11 @@ static int db8500_thermal_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pzone); pzone->mode = THERMAL_DEVICE_ENABLED; + +out_unlock: mutex_unlock(&pzone->th_lock); - return 0; + return ret; } static int db8500_thermal_remove(struct platform_device *pdev) diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c index 3078c40..4b15a5f 100644 --- a/drivers/thermal/dove_thermal.c +++ b/drivers/thermal/dove_thermal.c @@ -107,12 +107,13 @@ static int dove_get_temp(struct thermal_zone_device *thermal, } /* - * Calculate temperature. See Section 8.10.1 of 88AP510, - * Documentation/arm/Marvell/README + * Calculate temperature. According to Marvell internal + * documentation the formula for this is: + * Celsius = (322-reg)/1.3625 */ reg = readl_relaxed(priv->sensor); reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK; - *temp = ((2281638UL - (7298*reg)) / 10); + *temp = ((3220000000UL - (10000000UL * reg)) / 13625); return 0; } diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index b777ae6..d20ce9e 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -98,13 +98,13 @@ #define IDLE_INTERVAL 10000 #define MCELSIUS 1000 -#ifdef CONFIG_EXYNOS_THERMAL_EMUL +#ifdef CONFIG_THERMAL_EMULATION #define EXYNOS_EMUL_TIME 0x57F0 #define EXYNOS_EMUL_TIME_SHIFT 16 #define EXYNOS_EMUL_DATA_SHIFT 8 #define EXYNOS_EMUL_DATA_MASK 0xFF #define EXYNOS_EMUL_ENABLE 0x1 -#endif /* CONFIG_EXYNOS_THERMAL_EMUL */ +#endif /* CONFIG_THERMAL_EMULATION */ /* CPU Zone information */ #define PANIC_ZONE 4 @@ -143,6 +143,7 @@ struct thermal_cooling_conf { struct thermal_sensor_conf { char name[SENSOR_NAME_LEN]; int (*read_temperature)(void *data); + int (*write_emul_temp)(void *drv_data, unsigned long temp); struct thermal_trip_point_conf trip_data; struct thermal_cooling_conf cooling_data; void *private_data; @@ -240,26 +241,6 @@ static int exynos_get_crit_temp(struct thermal_zone_device *thermal, return ret; } -static int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) -{ - int i = 0, ret = -EINVAL; - struct cpufreq_frequency_table *table = NULL; -#ifdef CONFIG_CPU_FREQ - table = cpufreq_frequency_get_table(cpu); -#endif - if (!table) - return ret; - - while (table[i].frequency != CPUFREQ_TABLE_END) { - if (table[i].frequency == CPUFREQ_ENTRY_INVALID) - continue; - if (table[i].frequency == freq) - return i; - i++; - } - return ret; -} - /* Bind callback functions for thermal zone */ static int exynos_bind(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) @@ -286,8 +267,8 @@ static int exynos_bind(struct thermal_zone_device *thermal, /* Bind the thermal zone to the cpufreq cooling device */ for (i = 0; i < tab_size; i++) { clip_data = (struct freq_clip_table *)&(tab_ptr[i]); - level = exynos_get_frequency_level(0, clip_data->freq_clip_max); - if (level < 0) + level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max); + if (level == THERMAL_CSTATE_INVALID) return 0; switch (GET_ZONE(i)) { case MONITOR_ZONE: @@ -367,6 +348,23 @@ static int exynos_get_temp(struct thermal_zone_device *thermal, return 0; } +/* Get temperature callback functions for thermal zone */ +static int exynos_set_emul_temp(struct thermal_zone_device *thermal, + unsigned long temp) +{ + void *data; + int ret = -EINVAL; + + if (!th_zone->sensor_conf) { + pr_info("Temperature sensor not initialised\n"); + return -EINVAL; + } + data = th_zone->sensor_conf->private_data; + if (th_zone->sensor_conf->write_emul_temp) + ret = th_zone->sensor_conf->write_emul_temp(data, temp); + return ret; +} + /* Get the temperature trend */ static int exynos_get_trend(struct thermal_zone_device *thermal, int trip, enum thermal_trend *trend) @@ -390,6 +388,7 @@ static struct thermal_zone_device_ops const exynos_dev_ops = { .bind = exynos_bind, .unbind = exynos_unbind, .get_temp = exynos_get_temp, + .set_emul_temp = exynos_set_emul_temp, .get_trend = exynos_get_trend, .get_mode = exynos_get_mode, .set_mode = exynos_set_mode, @@ -712,6 +711,47 @@ static int exynos_tmu_read(struct exynos_tmu_data *data) return temp; } +#ifdef CONFIG_THERMAL_EMULATION +static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) +{ + struct exynos_tmu_data *data = drv_data; + unsigned int reg; + int ret = -EINVAL; + + if (data->soc == SOC_ARCH_EXYNOS4210) + goto out; + + if (temp && temp < MCELSIUS) + goto out; + + mutex_lock(&data->lock); + clk_enable(data->clk); + + reg = readl(data->base + EXYNOS_EMUL_CON); + + if (temp) { + temp /= MCELSIUS; + + reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) | + (temp_to_code(data, temp) + << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE; + } else { + reg &= ~EXYNOS_EMUL_ENABLE; + } + + writel(reg, data->base + EXYNOS_EMUL_CON); + + clk_disable(data->clk); + mutex_unlock(&data->lock); + return 0; +out: + return ret; +} +#else +static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) + { return -EINVAL; } +#endif/*CONFIG_THERMAL_EMULATION*/ + static void exynos_tmu_work(struct work_struct *work) { struct exynos_tmu_data *data = container_of(work, @@ -745,6 +785,7 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) static struct thermal_sensor_conf exynos_sensor_conf = { .name = "exynos-therm", .read_temperature = (int (*)(void *))exynos_tmu_read, + .write_emul_temp = exynos_tmu_set_emulation, }; #if defined(CONFIG_CPU_EXYNOS4210) @@ -814,6 +855,10 @@ static const struct of_device_id exynos_tmu_match[] = { .data = (void *)EXYNOS4210_TMU_DRV_DATA, }, { + .compatible = "samsung,exynos4412-tmu", + .data = (void *)EXYNOS_TMU_DRV_DATA, + }, + { .compatible = "samsung,exynos5250-tmu", .data = (void *)EXYNOS_TMU_DRV_DATA, }, @@ -851,93 +896,6 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data( platform_get_device_id(pdev)->driver_data; } -#ifdef CONFIG_EXYNOS_THERMAL_EMUL -static ssize_t exynos_tmu_emulation_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct exynos_tmu_data *data = platform_get_drvdata(pdev); - unsigned int reg; - u8 temp_code; - int temp = 0; - - if (data->soc == SOC_ARCH_EXYNOS4210) - goto out; - - mutex_lock(&data->lock); - clk_enable(data->clk); - reg = readl(data->base + EXYNOS_EMUL_CON); - clk_disable(data->clk); - mutex_unlock(&data->lock); - - if (reg & EXYNOS_EMUL_ENABLE) { - reg >>= EXYNOS_EMUL_DATA_SHIFT; - temp_code = reg & EXYNOS_EMUL_DATA_MASK; - temp = code_to_temp(data, temp_code); - } -out: - return sprintf(buf, "%d\n", temp * MCELSIUS); -} - -static ssize_t exynos_tmu_emulation_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct exynos_tmu_data *data = platform_get_drvdata(pdev); - unsigned int reg; - int temp; - - if (data->soc == SOC_ARCH_EXYNOS4210) - goto out; - - if (!sscanf(buf, "%d\n", &temp) || temp < 0) - return -EINVAL; - - mutex_lock(&data->lock); - clk_enable(data->clk); - - reg = readl(data->base + EXYNOS_EMUL_CON); - - if (temp) { - /* Both CELSIUS and MCELSIUS type are available for input */ - if (temp > MCELSIUS) - temp /= MCELSIUS; - - reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) | - (temp_to_code(data, (temp / MCELSIUS)) - << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE; - } else { - reg &= ~EXYNOS_EMUL_ENABLE; - } - - writel(reg, data->base + EXYNOS_EMUL_CON); - - clk_disable(data->clk); - mutex_unlock(&data->lock); - -out: - return count; -} - -static DEVICE_ATTR(emulation, 0644, exynos_tmu_emulation_show, - exynos_tmu_emulation_store); -static int create_emulation_sysfs(struct device *dev) -{ - return device_create_file(dev, &dev_attr_emulation); -} -static void remove_emulation_sysfs(struct device *dev) -{ - device_remove_file(dev, &dev_attr_emulation); -} -#else -static inline int create_emulation_sysfs(struct device *dev) { return 0; } -static inline void remove_emulation_sysfs(struct device *dev) {} -#endif - static int exynos_tmu_probe(struct platform_device *pdev) { struct exynos_tmu_data *data; @@ -983,12 +941,16 @@ static int exynos_tmu_probe(struct platform_device *pdev) return ret; } - data->clk = clk_get(NULL, "tmu_apbif"); + data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); if (IS_ERR(data->clk)) { dev_err(&pdev->dev, "Failed to get clock\n"); return PTR_ERR(data->clk); } + ret = clk_prepare(data->clk); + if (ret) + return ret; + if (pdata->type == SOC_ARCH_EXYNOS || pdata->type == SOC_ARCH_EXYNOS4210) data->soc = pdata->type; @@ -1037,14 +999,10 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk; } - ret = create_emulation_sysfs(&pdev->dev); - if (ret) - dev_err(&pdev->dev, "Failed to create emulation mode sysfs node\n"); - return 0; err_clk: platform_set_drvdata(pdev, NULL); - clk_put(data->clk); + clk_unprepare(data->clk); return ret; } @@ -1052,13 +1010,11 @@ static int exynos_tmu_remove(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - remove_emulation_sysfs(&pdev->dev); - exynos_tmu_control(pdev, false); exynos_unregister_thermal(); - clk_put(data->clk); + clk_unprepare(data->clk); platform_set_drvdata(pdev, NULL); diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c index 792479f..944ba2f 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/fair_share.c @@ -22,9 +22,6 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> #include <linux/thermal.h> #include "thermal_core.h" @@ -111,23 +108,15 @@ static int fair_share_throttle(struct thermal_zone_device *tz, int trip) static struct thermal_governor thermal_gov_fair_share = { .name = "fair_share", .throttle = fair_share_throttle, - .owner = THIS_MODULE, }; -static int __init thermal_gov_fair_share_init(void) +int thermal_gov_fair_share_register(void) { return thermal_register_governor(&thermal_gov_fair_share); } -static void __exit thermal_gov_fair_share_exit(void) +void thermal_gov_fair_share_unregister(void) { thermal_unregister_governor(&thermal_gov_fair_share); } -/* This should load after thermal framework */ -fs_initcall(thermal_gov_fair_share_init); -module_exit(thermal_gov_fair_share_exit); - -MODULE_AUTHOR("Durgadoss R"); -MODULE_DESCRIPTION("A simple weight based thermal throttling governor"); -MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c index e5500ed..dfeceaf 100644 --- a/drivers/thermal/kirkwood_thermal.c +++ b/drivers/thermal/kirkwood_thermal.c @@ -41,21 +41,21 @@ static int kirkwood_get_temp(struct thermal_zone_device *thermal, reg = readl_relaxed(priv->sensor); /* Valid check */ - if (!(reg >> KIRKWOOD_THERMAL_VALID_OFFSET) & - KIRKWOOD_THERMAL_VALID_MASK) { + if (!((reg >> KIRKWOOD_THERMAL_VALID_OFFSET) & + KIRKWOOD_THERMAL_VALID_MASK)) { dev_err(&thermal->device, "Temperature sensor reading not valid\n"); return -EIO; } /* - * Calculate temperature. See Section 8.10.1 of the 88AP510, - * datasheet, which has the same sensor. - * Documentation/arm/Marvell/README + * Calculate temperature. According to Marvell internal + * documentation the formula for this is: + * Celsius = (322-reg)/1.3625 */ reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) & KIRKWOOD_THERMAL_TEMP_MASK; - *temp = ((2281638UL - (7298*reg)) / 10); + *temp = ((3220000000UL - (10000000UL * reg)) / 13625); return 0; } diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 2cc5b61..8d7edd4 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/reboot.h> #include <linux/slab.h> #include <linux/spinlock.h> @@ -377,6 +378,9 @@ static int rcar_thermal_probe(struct platform_device *pdev) spin_lock_init(&common->lock); common->dev = dev; + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (irq) { int ret; @@ -419,12 +423,15 @@ static int rcar_thermal_probe(struct platform_device *pdev) priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) { dev_err(dev, "Could not allocate priv\n"); - return -ENOMEM; + ret = -ENOMEM; + goto error_unregister; } priv->base = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->base)) - return PTR_ERR(priv->base); + if (IS_ERR(priv->base)) { + ret = PTR_ERR(priv->base); + goto error_unregister; + } priv->common = common; priv->id = i; @@ -443,10 +450,10 @@ static int rcar_thermal_probe(struct platform_device *pdev) goto error_unregister; } - list_move_tail(&priv->list, &common->head); - if (rcar_has_irq_support(priv)) rcar_thermal_irq_enable(priv); + + list_move_tail(&priv->list, &common->head); } platform_set_drvdata(pdev, common); @@ -456,8 +463,14 @@ static int rcar_thermal_probe(struct platform_device *pdev) return 0; error_unregister: - rcar_thermal_for_each_priv(priv, common) + rcar_thermal_for_each_priv(priv, common) { thermal_zone_device_unregister(priv->zone); + if (rcar_has_irq_support(priv)) + rcar_thermal_irq_disable(priv); + } + + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); return ret; } @@ -465,13 +478,20 @@ error_unregister: static int rcar_thermal_remove(struct platform_device *pdev) { struct rcar_thermal_common *common = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; struct rcar_thermal_priv *priv; - rcar_thermal_for_each_priv(priv, common) + rcar_thermal_for_each_priv(priv, common) { thermal_zone_device_unregister(priv->zone); + if (rcar_has_irq_support(priv)) + rcar_thermal_irq_disable(priv); + } platform_set_drvdata(pdev, NULL); + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + return 0; } diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c index 407cde3..4d4ddae 100644 --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/step_wise.c @@ -22,9 +22,6 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> #include <linux/thermal.h> #include "thermal_core.h" @@ -59,9 +56,12 @@ static unsigned long get_target_state(struct thermal_instance *instance, switch (trend) { case THERMAL_TREND_RAISING: - if (throttle) + if (throttle) { cur_state = cur_state < instance->upper ? (cur_state + 1) : instance->upper; + if (cur_state < instance->lower) + cur_state = instance->lower; + } break; case THERMAL_TREND_RAISE_FULL: if (throttle) @@ -71,8 +71,11 @@ static unsigned long get_target_state(struct thermal_instance *instance, if (cur_state == instance->lower) { if (!throttle) cur_state = -1; - } else + } else { cur_state -= 1; + if (cur_state > instance->upper) + cur_state = instance->upper; + } break; case THERMAL_TREND_DROP_FULL: if (cur_state == instance->lower) { @@ -180,23 +183,14 @@ static int step_wise_throttle(struct thermal_zone_device *tz, int trip) static struct thermal_governor thermal_gov_step_wise = { .name = "step_wise", .throttle = step_wise_throttle, - .owner = THIS_MODULE, }; -static int __init thermal_gov_step_wise_init(void) +int thermal_gov_step_wise_register(void) { return thermal_register_governor(&thermal_gov_step_wise); } -static void __exit thermal_gov_step_wise_exit(void) +void thermal_gov_step_wise_unregister(void) { thermal_unregister_governor(&thermal_gov_step_wise); } - -/* This should load after thermal framework */ -fs_initcall(thermal_gov_step_wise_init); -module_exit(thermal_gov_step_wise_exit); - -MODULE_AUTHOR("Durgadoss R"); -MODULE_DESCRIPTION("A step-by-step thermal throttling governor"); -MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_core.c index 5b7863a..d755440 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_core.c @@ -40,7 +40,7 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); static DEFINE_IDR(thermal_tz_idr); static DEFINE_IDR(thermal_cdev_idr); @@ -99,7 +99,6 @@ int thermal_register_governor(struct thermal_governor *governor) return err; } -EXPORT_SYMBOL_GPL(thermal_register_governor); void thermal_unregister_governor(struct thermal_governor *governor) { @@ -127,7 +126,6 @@ exit: mutex_unlock(&thermal_governor_lock); return; } -EXPORT_SYMBOL_GPL(thermal_unregister_governor); static int get_idr(struct idr *idr, struct mutex *lock, int *id) { @@ -371,16 +369,28 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip) monitor_thermal_zone(tz); } -static int thermal_zone_get_temp(struct thermal_zone_device *tz, - unsigned long *temp) +/** + * thermal_zone_get_temp() - returns its the temperature of thermal zone + * @tz: a valid pointer to a struct thermal_zone_device + * @temp: a valid pointer to where to store the resulting temperature. + * + * When a valid thermal zone reference is passed, it will fetch its + * temperature and fill @temp. + * + * Return: On success returns 0, an error code otherwise + */ +int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp) { - int ret = 0; + int ret = -EINVAL; #ifdef CONFIG_THERMAL_EMULATION int count; unsigned long crit_temp = -1UL; enum thermal_trip_type type; #endif + if (!tz || IS_ERR(tz)) + goto exit; + mutex_lock(&tz->lock); ret = tz->ops->get_temp(tz, temp); @@ -404,8 +414,10 @@ static int thermal_zone_get_temp(struct thermal_zone_device *tz, skip_emul: #endif mutex_unlock(&tz->lock); +exit: return ret; } +EXPORT_SYMBOL_GPL(thermal_zone_get_temp); static void update_temperature(struct thermal_zone_device *tz) { @@ -434,7 +446,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) for (count = 0; count < tz->trips; count++) handle_thermal_trip(tz, count); } -EXPORT_SYMBOL(thermal_zone_device_update); +EXPORT_SYMBOL_GPL(thermal_zone_device_update); static void thermal_zone_device_check(struct work_struct *work) { @@ -1097,13 +1109,23 @@ thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) #endif /** - * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone - * @tz: thermal zone device + * thermal_zone_bind_cooling_device() - bind a cooling device to a thermal zone + * @tz: pointer to struct thermal_zone_device * @trip: indicates which trip point the cooling devices is * associated with in this thermal zone. - * @cdev: thermal cooling device + * @cdev: pointer to struct thermal_cooling_device + * @upper: the Maximum cooling state for this trip point. + * THERMAL_NO_LIMIT means no upper limit, + * and the cooling device can be in max_state. + * @lower: the Minimum cooling state can be used for this trip point. + * THERMAL_NO_LIMIT means no lower limit, + * and the cooling device can be in cooling state 0. * + * This interface function bind a thermal cooling device to the certain trip + * point of a thermal zone device. * This function is usually called in the thermal zone device .bind callback. + * + * Return: 0 on success, the proper error value otherwise. */ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, @@ -1197,16 +1219,21 @@ free_mem: kfree(dev); return result; } -EXPORT_SYMBOL(thermal_zone_bind_cooling_device); +EXPORT_SYMBOL_GPL(thermal_zone_bind_cooling_device); /** - * thermal_zone_unbind_cooling_device - unbind a cooling device from a thermal zone - * @tz: thermal zone device + * thermal_zone_unbind_cooling_device() - unbind a cooling device from a + * thermal zone. + * @tz: pointer to a struct thermal_zone_device. * @trip: indicates which trip point the cooling devices is * associated with in this thermal zone. - * @cdev: thermal cooling device + * @cdev: pointer to a struct thermal_cooling_device. * + * This interface function unbind a thermal cooling device from the certain + * trip point of a thermal zone device. * This function is usually called in the thermal zone device .unbind callback. + * + * Return: 0 on success, the proper error value otherwise. */ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, @@ -1237,7 +1264,7 @@ unbind: kfree(pos); return 0; } -EXPORT_SYMBOL(thermal_zone_unbind_cooling_device); +EXPORT_SYMBOL_GPL(thermal_zone_unbind_cooling_device); static void thermal_release(struct device *dev) { @@ -1260,10 +1287,17 @@ static struct class thermal_class = { }; /** - * thermal_cooling_device_register - register a new thermal cooling device + * thermal_cooling_device_register() - register a new thermal cooling device * @type: the thermal cooling device type. * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. + * + * This interface function adds a new thermal cooling device (fan/processor/...) + * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + * to all the thermal zone devices registered at the same time. + * + * Return: a pointer to the created struct thermal_cooling_device or an + * ERR_PTR. Caller must check return value with IS_ERR*() helpers. */ struct thermal_cooling_device * thermal_cooling_device_register(char *type, void *devdata, @@ -1289,7 +1323,7 @@ thermal_cooling_device_register(char *type, void *devdata, return ERR_PTR(result); } - strcpy(cdev->type, type ? : ""); + strlcpy(cdev->type, type ? : "", sizeof(cdev->type)); mutex_init(&cdev->lock); INIT_LIST_HEAD(&cdev->thermal_instances); cdev->ops = ops; @@ -1334,7 +1368,7 @@ unregister: device_unregister(&cdev->device); return ERR_PTR(result); } -EXPORT_SYMBOL(thermal_cooling_device_register); +EXPORT_SYMBOL_GPL(thermal_cooling_device_register); /** * thermal_cooling_device_unregister - removes the registered thermal cooling device @@ -1394,7 +1428,7 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) device_unregister(&cdev->device); return; } -EXPORT_SYMBOL(thermal_cooling_device_unregister); +EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister); void thermal_cdev_update(struct thermal_cooling_device *cdev) { @@ -1420,7 +1454,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev) EXPORT_SYMBOL(thermal_cdev_update); /** - * notify_thermal_framework - Sensor drivers use this API to notify framework + * thermal_notify_framework - Sensor drivers use this API to notify framework * @tz: thermal zone device * @trip: indicates which trip point has been crossed * @@ -1431,16 +1465,21 @@ EXPORT_SYMBOL(thermal_cdev_update); * The throttling policy is based on the configured platform data; if no * platform data is provided, this uses the step_wise throttling policy. */ -void notify_thermal_framework(struct thermal_zone_device *tz, int trip) +void thermal_notify_framework(struct thermal_zone_device *tz, int trip) { handle_thermal_trip(tz, trip); } -EXPORT_SYMBOL(notify_thermal_framework); +EXPORT_SYMBOL_GPL(thermal_notify_framework); /** - * create_trip_attrs - create attributes for trip points + * create_trip_attrs() - create attributes for trip points * @tz: the thermal zone device * @mask: Writeable trip point bitmap. + * + * helper function to instantiate sysfs entries for every trip + * point and its properties of a struct thermal_zone_device. + * + * Return: 0 on success, the proper error value otherwise. */ static int create_trip_attrs(struct thermal_zone_device *tz, int mask) { @@ -1541,7 +1580,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) } /** - * thermal_zone_device_register - register a new thermal zone device + * thermal_zone_device_register() - register a new thermal zone device * @type: the thermal zone device type * @trips: the number of trip points the thermal zone support * @mask: a bit string indicating the writeablility of trip points @@ -1554,8 +1593,15 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) * whether trip points have been crossed (0 for interrupt * driven systems) * + * This interface function adds a new thermal zone device (sensor) to + * /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the + * thermal cooling devices registered at the same time. * thermal_zone_device_unregister() must be called when the device is no * longer needed. The passive cooling depends on the .get_trend() return value. + * + * Return: a pointer to the created struct thermal_zone_device or an + * in case of error, an ERR_PTR. Caller must check return value with + * IS_ERR*() helpers. */ struct thermal_zone_device *thermal_zone_device_register(const char *type, int trips, int mask, void *devdata, @@ -1594,7 +1640,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, return ERR_PTR(result); } - strcpy(tz->type, type ? : ""); + strlcpy(tz->type, type ? : "", sizeof(tz->type)); tz->ops = ops; tz->tzp = tzp; tz->device.class = &thermal_class; @@ -1687,7 +1733,7 @@ unregister: device_unregister(&tz->device); return ERR_PTR(result); } -EXPORT_SYMBOL(thermal_zone_device_register); +EXPORT_SYMBOL_GPL(thermal_zone_device_register); /** * thermal_device_unregister - removes the registered thermal zone device @@ -1754,7 +1800,45 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_unregister(&tz->device); return; } -EXPORT_SYMBOL(thermal_zone_device_unregister); +EXPORT_SYMBOL_GPL(thermal_zone_device_unregister); + +/** + * thermal_zone_get_zone_by_name() - search for a zone and returns its ref + * @name: thermal zone name to fetch the temperature + * + * When only one zone is found with the passed name, returns a reference to it. + * + * Return: On success returns a reference to an unique thermal zone with + * matching name equals to @name, an ERR_PTR otherwise (-EINVAL for invalid + * paramenters, -ENODEV for not found and -EEXIST for multiple matches). + */ +struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name) +{ + struct thermal_zone_device *pos = NULL, *ref = ERR_PTR(-EINVAL); + unsigned int found = 0; + + if (!name) + goto exit; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(pos, &thermal_tz_list, node) + if (!strnicmp(name, pos->type, THERMAL_NAME_LENGTH)) { + found++; + ref = pos; + } + mutex_unlock(&thermal_list_lock); + + /* nothing has been found, thus an error code for it */ + if (found == 0) + ref = ERR_PTR(-ENODEV); + else if (found > 1) + /* Success only when an unique zone is found */ + ref = ERR_PTR(-EEXIST); + +exit: + return ref; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name); #ifdef CONFIG_NET static struct genl_family thermal_event_genl_family = { @@ -1832,7 +1916,7 @@ int thermal_generate_netlink_event(struct thermal_zone_device *tz, return result; } -EXPORT_SYMBOL(thermal_generate_netlink_event); +EXPORT_SYMBOL_GPL(thermal_generate_netlink_event); static int genetlink_init(void) { @@ -1858,30 +1942,69 @@ static inline int genetlink_init(void) { return 0; } static inline void genetlink_exit(void) {} #endif /* !CONFIG_NET */ +static int __init thermal_register_governors(void) +{ + int result; + + result = thermal_gov_step_wise_register(); + if (result) + return result; + + result = thermal_gov_fair_share_register(); + if (result) + return result; + + return thermal_gov_user_space_register(); +} + +static void thermal_unregister_governors(void) +{ + thermal_gov_step_wise_unregister(); + thermal_gov_fair_share_unregister(); + thermal_gov_user_space_unregister(); +} + static int __init thermal_init(void) { - int result = 0; + int result; + + result = thermal_register_governors(); + if (result) + goto error; result = class_register(&thermal_class); - if (result) { - idr_destroy(&thermal_tz_idr); - idr_destroy(&thermal_cdev_idr); - mutex_destroy(&thermal_idr_lock); - mutex_destroy(&thermal_list_lock); - return result; - } + if (result) + goto unregister_governors; + result = genetlink_init(); + if (result) + goto unregister_class; + + return 0; + +unregister_governors: + thermal_unregister_governors(); +unregister_class: + class_unregister(&thermal_class); +error: + idr_destroy(&thermal_tz_idr); + idr_destroy(&thermal_cdev_idr); + mutex_destroy(&thermal_idr_lock); + mutex_destroy(&thermal_list_lock); + mutex_destroy(&thermal_governor_lock); return result; } static void __exit thermal_exit(void) { + genetlink_exit(); class_unregister(&thermal_class); + thermal_unregister_governors(); idr_destroy(&thermal_tz_idr); idr_destroy(&thermal_cdev_idr); mutex_destroy(&thermal_idr_lock); mutex_destroy(&thermal_list_lock); - genetlink_exit(); + mutex_destroy(&thermal_governor_lock); } fs_initcall(thermal_init); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 0d3205a..7cf2f66 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -50,4 +50,31 @@ struct thermal_instance { struct list_head cdev_node; /* node in cdev->thermal_instances */ }; +int thermal_register_governor(struct thermal_governor *); +void thermal_unregister_governor(struct thermal_governor *); + +#ifdef CONFIG_THERMAL_GOV_STEP_WISE +int thermal_gov_step_wise_register(void); +void thermal_gov_step_wise_unregister(void); +#else +static inline int thermal_gov_step_wise_register(void) { return 0; } +static inline void thermal_gov_step_wise_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_STEP_WISE */ + +#ifdef CONFIG_THERMAL_GOV_FAIR_SHARE +int thermal_gov_fair_share_register(void); +void thermal_gov_fair_share_unregister(void); +#else +static inline int thermal_gov_fair_share_register(void) { return 0; } +static inline void thermal_gov_fair_share_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_FAIR_SHARE */ + +#ifdef CONFIG_THERMAL_GOV_USER_SPACE +int thermal_gov_user_space_register(void); +void thermal_gov_user_space_unregister(void); +#else +static inline int thermal_gov_user_space_register(void) { return 0; } +static inline void thermal_gov_user_space_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_USER_SPACE */ + #endif /* __THERMAL_CORE_H__ */ diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c index 6bbb380..10adcdd 100644 --- a/drivers/thermal/user_space.c +++ b/drivers/thermal/user_space.c @@ -22,9 +22,6 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> #include <linux/thermal.h> #include "thermal_core.h" @@ -46,23 +43,15 @@ static int notify_user_space(struct thermal_zone_device *tz, int trip) static struct thermal_governor thermal_gov_user_space = { .name = "user_space", .throttle = notify_user_space, - .owner = THIS_MODULE, }; -static int __init thermal_gov_user_space_init(void) +int thermal_gov_user_space_register(void) { return thermal_register_governor(&thermal_gov_user_space); } -static void __exit thermal_gov_user_space_exit(void) +void thermal_gov_user_space_unregister(void) { thermal_unregister_governor(&thermal_gov_user_space); } -/* This should load after thermal framework */ -fs_initcall(thermal_gov_user_space_init); -module_exit(thermal_gov_user_space_exit); - -MODULE_AUTHOR("Durgadoss R"); -MODULE_DESCRIPTION("A user space Thermal notifier"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index aab2ab2..371d0e7 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -128,7 +128,7 @@ config TWL6030_USB config USB_GPIO_VBUS tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" - depends on GENERIC_GPIO + depends on GPIOLIB help Provides simple GPIO VBUS sensing for controllers with an internal transceiver via the usb_phy interface, and diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c04ccdf..1534cf3 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2483,7 +2483,7 @@ config FB_SSD1307 tristate "Solomon SSD1307 framebuffer support" depends on FB && I2C depends on OF - depends on GENERIC_GPIO + depends on GPIOLIB select FB_SYS_FOPS select FB_SYS_FILLRECT select FB_SYS_COPYAREA diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 2e166c3..d5ab658 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -36,14 +36,14 @@ config LCD_CORGI config LCD_L4F00242T03 tristate "Epson L4F00242T03 LCD" - depends on SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GPIOLIB help SPI driver for Epson L4F00242T03. This provides basic support for init and powering the LCD up/down through a sysfs interface. config LCD_LMS283GF05 tristate "Samsung LMS283GF05 LCD" - depends on SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GPIOLIB help SPI driver for Samsung LMS283GF05. This provides basic support for powering the LCD up/down through a sysfs interface. diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index e8ca63a..2bd1257 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -50,7 +50,7 @@ config W1_MASTER_DS1WM config W1_MASTER_GPIO tristate "GPIO 1-wire busmaster" - depends on GENERIC_GPIO + depends on GPIOLIB help Say Y here if you want to communicate with your 1-wire devices using GPIO pins. This driver uses the GPIO API to control the wire. diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h new file mode 100644 index 0000000..d09deab --- /dev/null +++ b/include/linux/acpi_dma.h @@ -0,0 +1,116 @@ +/* + * ACPI helpers for DMA request / controller + * + * Based on of_dma.h + * + * Copyright (C) 2013, Intel Corporation + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_ACPI_DMA_H +#define __LINUX_ACPI_DMA_H + +#include <linux/list.h> +#include <linux/device.h> +#include <linux/dmaengine.h> + +/** + * struct acpi_dma_spec - slave device DMA resources + * @chan_id: channel unique id + * @slave_id: request line unique id + * @dev: struct device of the DMA controller to be used in the filter + * function + */ +struct acpi_dma_spec { + int chan_id; + int slave_id; + struct device *dev; +}; + +/** + * struct acpi_dma - representation of the registered DMAC + * @dma_controllers: linked list node + * @dev: struct device of this controller + * @acpi_dma_xlate: callback function to find a suitable channel + * @data: private data used by a callback function + */ +struct acpi_dma { + struct list_head dma_controllers; + struct device *dev; + struct dma_chan *(*acpi_dma_xlate) + (struct acpi_dma_spec *, struct acpi_dma *); + void *data; +}; + +/* Used with acpi_dma_simple_xlate() */ +struct acpi_dma_filter_info { + dma_cap_mask_t dma_cap; + dma_filter_fn filter_fn; +}; + +#ifdef CONFIG_DMA_ACPI + +int acpi_dma_controller_register(struct device *dev, + struct dma_chan *(*acpi_dma_xlate) + (struct acpi_dma_spec *, struct acpi_dma *), + void *data); +int acpi_dma_controller_free(struct device *dev); +int devm_acpi_dma_controller_register(struct device *dev, + struct dma_chan *(*acpi_dma_xlate) + (struct acpi_dma_spec *, struct acpi_dma *), + void *data); +void devm_acpi_dma_controller_free(struct device *dev); + +struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, + size_t index); +struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev, + const char *name); + +struct dma_chan *acpi_dma_simple_xlate(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma); +#else + +static inline int acpi_dma_controller_register(struct device *dev, + struct dma_chan *(*acpi_dma_xlate) + (struct acpi_dma_spec *, struct acpi_dma *), + void *data) +{ + return -ENODEV; +} +static inline int acpi_dma_controller_free(struct device *dev) +{ + return -ENODEV; +} +static inline int devm_acpi_dma_controller_register(struct device *dev, + struct dma_chan *(*acpi_dma_xlate) + (struct acpi_dma_spec *, struct acpi_dma *), + void *data) +{ + return -ENODEV; +} +static inline void devm_acpi_dma_controller_free(struct device *dev) +{ +} + +static inline struct dma_chan *acpi_dma_request_slave_chan_by_index( + struct device *dev, size_t index) +{ + return NULL; +} +static inline struct dma_chan *acpi_dma_request_slave_chan_by_name( + struct device *dev, const char *name) +{ + return NULL; +} + +#define acpi_dma_simple_xlate NULL + +#endif + +#define acpi_dma_request_slave_channel acpi_dma_request_slave_chan_by_index + +#endif /* __LINUX_ACPI_DMA_H */ diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index 40b4ef5..282e270 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -25,34 +25,39 @@ #define __CPU_COOLING_H__ #include <linux/thermal.h> +#include <linux/cpumask.h> -#define CPUFREQ_COOLING_START 0 -#define CPUFREQ_COOLING_STOP 1 - -#if defined(CONFIG_CPU_THERMAL) || defined(CONFIG_CPU_THERMAL_MODULE) +#ifdef CONFIG_CPU_THERMAL /** * cpufreq_cooling_register - function to create cpufreq cooling device. * @clip_cpus: cpumask of cpus where the frequency constraints will happen */ -struct thermal_cooling_device *cpufreq_cooling_register( - const struct cpumask *clip_cpus); +struct thermal_cooling_device * +cpufreq_cooling_register(const struct cpumask *clip_cpus); /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. */ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev); + +unsigned long cpufreq_cooling_get_level(unsigned int, unsigned int); #else /* !CONFIG_CPU_THERMAL */ -static inline struct thermal_cooling_device *cpufreq_cooling_register( - const struct cpumask *clip_cpus) +static inline struct thermal_cooling_device * +cpufreq_cooling_register(const struct cpumask *clip_cpus) { return NULL; } -static inline void cpufreq_cooling_unregister( - struct thermal_cooling_device *cdev) +static inline +void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { return; } +static inline +unsigned long cpufreq_cooling_get_level(unsigned int, unsigned int) +{ + return THERMAL_CSTATE_INVALID; +} #endif /* CONFIG_CPU_THERMAL */ #endif /* __CPU_COOLING_H__ */ diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 91ac8da..96d3e4a 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -967,8 +967,9 @@ enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); #ifdef CONFIG_DMA_ENGINE enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); -struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); -struct dma_chan *dma_request_slave_channel(struct device *dev, char *name); +struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, + dma_filter_fn fn, void *fn_param); +struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); void dma_release_channel(struct dma_chan *chan); #else static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) @@ -978,13 +979,13 @@ static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descript static inline void dma_issue_pending_all(void) { } -static inline struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, +static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param) { return NULL; } static inline struct dma_chan *dma_request_slave_channel(struct device *dev, - char *name) + const char *name) { return NULL; } @@ -1005,9 +1006,9 @@ struct dma_chan *net_dma_find_channel(void); __dma_request_slave_channel_compat(&(mask), x, y, dev, name) static inline struct dma_chan -*__dma_request_slave_channel_compat(dma_cap_mask_t *mask, dma_filter_fn fn, - void *fn_param, struct device *dev, - char *name) +*__dma_request_slave_channel_compat(const dma_cap_mask_t *mask, + dma_filter_fn fn, void *fn_param, + struct device *dev, char *name) { struct dma_chan *chan; diff --git a/include/linux/gpio.h b/include/linux/gpio.h index f6c7ae3..552e3f4 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -39,7 +39,7 @@ struct gpio { const char *label; }; -#ifdef CONFIG_GENERIC_GPIO +#ifdef CONFIG_GPIOLIB #ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H #include <asm/gpio.h> @@ -74,7 +74,7 @@ static inline int irq_to_gpio(unsigned int irq) #endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */ -#else /* ! CONFIG_GENERIC_GPIO */ +#else /* ! CONFIG_GPIOLIB */ #include <linux/kernel.h> #include <linux/types.h> @@ -226,7 +226,7 @@ gpiochip_remove_pin_ranges(struct gpio_chip *chip) WARN_ON(1); } -#endif /* ! CONFIG_GENERIC_GPIO */ +#endif /* ! CONFIG_GPIOLIB */ struct device; diff --git a/include/linux/of_dma.h b/include/linux/of_dma.h index d15073e..364dda7 100644 --- a/include/linux/of_dma.h +++ b/include/linux/of_dma.h @@ -25,7 +25,6 @@ struct of_dma { struct dma_chan *(*of_dma_xlate) (struct of_phandle_args *, struct of_dma *); void *of_dma_data; - int use_count; }; struct of_dma_filter_info { @@ -38,9 +37,9 @@ extern int of_dma_controller_register(struct device_node *np, struct dma_chan *(*of_dma_xlate) (struct of_phandle_args *, struct of_dma *), void *data); -extern int of_dma_controller_free(struct device_node *np); +extern void of_dma_controller_free(struct device_node *np); extern struct dma_chan *of_dma_request_slave_channel(struct device_node *np, - char *name); + const char *name); extern struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma); #else @@ -52,13 +51,12 @@ static inline int of_dma_controller_register(struct device_node *np, return -ENODEV; } -static inline int of_dma_controller_free(struct device_node *np) +static inline void of_dma_controller_free(struct device_node *np) { - return -ENODEV; } static inline struct dma_chan *of_dma_request_slave_channel(struct device_node *np, - char *name) + const char *name) { return NULL; } diff --git a/include/linux/sudmac.h b/include/linux/sudmac.h new file mode 100644 index 0000000..377b8a5 --- /dev/null +++ b/include/linux/sudmac.h @@ -0,0 +1,52 @@ +/* + * Header for the SUDMAC driver + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ +#ifndef SUDMAC_H +#define SUDMAC_H + +#include <linux/dmaengine.h> +#include <linux/shdma-base.h> +#include <linux/types.h> + +/* Used by slave DMA clients to request DMA to/from a specific peripheral */ +struct sudmac_slave { + struct shdma_slave shdma_slave; /* Set by the platform */ +}; + +/* + * Supplied by platforms to specify, how a DMA channel has to be configured for + * a certain peripheral + */ +struct sudmac_slave_config { + int slave_id; +}; + +struct sudmac_channel { + unsigned long offset; + unsigned long config; + unsigned long wait; /* The configuable range is 0 to 3 */ + unsigned long dint_end_bit; +}; + +struct sudmac_pdata { + const struct sudmac_slave_config *slave; + int slave_num; + const struct sudmac_channel *channel; + int channel_num; +}; + +/* Definitions for the sudmac_channel.config */ +#define SUDMAC_TX_BUFFER_MODE BIT(0) +#define SUDMAC_RX_END_MODE BIT(1) + +/* Definitions for the sudmac_channel.dint_end_bit */ +#define SUDMAC_DMA_BIT_CH0 BIT(0) +#define SUDMAC_DMA_BIT_CH1 BIT(1) + +#endif diff --git a/include/linux/thermal.h b/include/linux/thermal.h index e3c0ae9..a386a1c 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -33,8 +33,11 @@ #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 +/* invalid cooling state */ +#define THERMAL_CSTATE_INVALID -1UL + /* No upper/lower limit requirement */ -#define THERMAL_NO_LIMIT -1UL +#define THERMAL_NO_LIMIT THERMAL_CSTATE_INVALID /* Unit conversion macros */ #define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ @@ -184,7 +187,6 @@ struct thermal_governor { char name[THERMAL_NAME_LENGTH]; int (*throttle)(struct thermal_zone_device *tz, int trip); struct list_head governor_list; - struct module *owner; }; /* Structure that holds binding parameters for a zone */ @@ -237,21 +239,20 @@ void thermal_zone_device_update(struct thermal_zone_device *); struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); +struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); +int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp); int get_tz_trend(struct thermal_zone_device *, int); struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, struct thermal_cooling_device *, int); void thermal_cdev_update(struct thermal_cooling_device *); -void notify_thermal_framework(struct thermal_zone_device *, int); - -int thermal_register_governor(struct thermal_governor *); -void thermal_unregister_governor(struct thermal_governor *); +void thermal_notify_framework(struct thermal_zone_device *, int); #ifdef CONFIG_NET extern int thermal_generate_netlink_event(struct thermal_zone_device *tz, enum events event); #else -static int thermal_generate_netlink_event(struct thermal_zone_device *tz, +static inline int thermal_generate_netlink_event(struct thermal_zone_device *tz, enum events event) { return 0; |