diff options
44 files changed, 367 insertions, 1555 deletions
diff --git a/Documentation/input/notifier.txt b/Documentation/input/notifier.txt new file mode 100644 index 0000000..95172ca --- /dev/null +++ b/Documentation/input/notifier.txt @@ -0,0 +1,52 @@ +Keyboard notifier + +One can use register_keyboard_notifier to get called back on keyboard +events (see kbd_keycode() function for details). The passed structure is +keyboard_notifier_param: + +- 'vc' always provide the VC for which the keyboard event applies; +- 'down' is 1 for a key press event, 0 for a key release; +- 'shift' is the current modifier state, mask bit indexes are KG_*; +- 'value' depends on the type of event. + +- KBD_KEYCODE events are always sent before other events, value is the keycode. +- KBD_UNBOUND_KEYCODE events are sent if the keycode is not bound to a keysym. + value is the keycode. +- KBD_UNICODE events are sent if the keycode -> keysym translation produced a + unicode character. value is the unicode value. +- KBD_KEYSYM events are sent if the keycode -> keysym translation produced a + non-unicode character. value is the keysym. +- KBD_POST_KEYSYM events are sent after the treatment of non-unicode keysyms. + That permits one to inspect the resulting LEDs for instance. + +For each kind of event but the last, the callback may return NOTIFY_STOP in +order to "eat" the event: the notify loop is stopped and the keyboard event is +dropped. + +In a rough C snippet, we have: + +kbd_keycode(keycode) { + ... + params.value = keycode; + if (notifier_call_chain(KBD_KEYCODE,¶ms) == NOTIFY_STOP) + || !bound) { + notifier_call_chain(KBD_UNBOUND_KEYCODE,¶ms); + return; + } + + if (unicode) { + param.value = unicode; + if (notifier_call_chain(KBD_UNICODE,¶ms) == NOTIFY_STOP) + return; + emit unicode; + return; + } + + params.value = keysym; + if (notifier_call_chain(KBD_KEYSYM,¶ms) == NOTIFY_STOP) + return; + apply keysym; + notifier_call_chain(KBD_POST_KEYSYM,¶ms); +} + +NOTE: This notifier is usually called from interrupt context. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 622f784..650b0d8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -732,6 +732,8 @@ and is between 256 and 4096 characters. It is defined in the file (Don't attempt to blink the leds) i8042.noaux [HW] Don't check for auxiliary (== mouse) port i8042.nokbd [HW] Don't check/create keyboard port + i8042.noloop [HW] Disable the AUX Loopback command while probing + for the AUX port i8042.nomux [HW] Don't check presence of an active multiplexing controller i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX diff --git a/Documentation/mca.txt b/Documentation/mca.txt index aabce4a..510375d 100644 --- a/Documentation/mca.txt +++ b/Documentation/mca.txt @@ -143,14 +143,7 @@ MCA Device Drivers Currently, there are a number of MCA-specific device drivers. -1) PS/2 ESDI - drivers/block/ps2esdi.c - include/linux/ps2esdi.h - Uses major number 36, and should use /dev files /dev/eda, /dev/edb. - Supports two drives, but only one controller. May use the - command-line args "ed=cyl,head,sec" and "tp720". - -2) PS/2 SCSI +1) PS/2 SCSI drivers/scsi/ibmmca.c drivers/scsi/ibmmca.h The driver for the IBM SCSI subsystem. Includes both integrated @@ -159,25 +152,25 @@ Currently, there are a number of MCA-specific device drivers. machine with a front-panel display (i.e. model 95), you can use "ibmmcascsi=display" to enable a drive activity indicator. -3) 3c523 +2) 3c523 drivers/net/3c523.c drivers/net/3c523.h 3Com 3c523 Etherlink/MC ethernet driver. -4) SMC Ultra/MCA and IBM Adapter/A +3) SMC Ultra/MCA and IBM Adapter/A drivers/net/smc-mca.c drivers/net/smc-mca.h Driver for the MCA version of the SMC Ultra and various other OEM'ed and work-alike cards (Elite, Adapter/A, etc). -5) NE/2 +4) NE/2 driver/net/ne2.c driver/net/ne2.h The NE/2 is the MCA version of the NE2000. This may not work with clones that have a different adapter id than the original NE/2. -6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and +5) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and Reply Sound Blaster/SCSI (SCSI part) Better support for these cards than the driver for ISA. Supports multiple cards with IRQ sharing. diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index d25ef96..44ad90c 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -610,7 +610,7 @@ write_led(const char __user * buffer, unsigned long count, (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); if (invert) /* invert target value */ - led_out = !led_out & 0x1; + led_out = !led_out; if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n", diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index f6215e8..d5729d5 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -293,13 +293,12 @@ static int extract_package(struct acpi_battery *battery, strncpy(ptr, (u8 *)&element->integer.value, sizeof(acpi_integer)); ptr[sizeof(acpi_integer)] = 0; - } else return -EFAULT; + } else + *ptr = 0; /* don't have value */ } else { - if (element->type == ACPI_TYPE_INTEGER) { - int *x = (int *)((u8 *)battery + - offsets[i].offset); - *x = element->integer.value; - } else return -EFAULT; + int *x = (int *)((u8 *)battery + offsets[i].offset); + *x = (element->type == ACPI_TYPE_INTEGER) ? + element->integer.value : -1; } } return 0; diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 307cef6..fa44fb9 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -710,6 +710,7 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr, if (!count) return -EINVAL; + begin_undock(dock_station); ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST); return ret ? ret: count; } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6f3b217..e8e2d88 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -216,8 +216,10 @@ static void acpi_safe_halt(void) * test NEED_RESCHED: */ smp_mb(); - if (!need_resched()) + if (!need_resched()) { safe_halt(); + local_irq_disable(); + } current_thread_info()->status |= TS_POLLING; } @@ -421,7 +423,9 @@ static void acpi_processor_idle(void) else acpi_safe_halt(); - local_irq_enable(); + if (irqs_disabled()) + local_irq_enable(); + return; } @@ -530,7 +534,9 @@ static void acpi_processor_idle(void) * skew otherwise. */ sleep_ticks = 0xFFFFFFFF; - local_irq_enable(); + if (irqs_disabled()) + local_irq_enable(); + break; case ACPI_STATE_C2: diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 1bc0c74..12fb44f 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -807,40 +807,11 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - long device_id; - struct device *dev; - struct acpi_device *device; + if (!video) return -EINVAL; - device = video->device; - - status = - acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); - - if (!ACPI_SUCCESS(status)) - return -ENODEV; - - /* We need to attempt to determine whether the _ADR refers to a - PCI device or not. There's no terribly good way to do this, - so the best we can hope for is to assume that there'll never - be a video device in the host bridge */ - if (device_id >= 0x10000) { - /* It looks like a PCI device. Does it exist? */ - dev = acpi_get_physical_device(device->handle); - } else { - /* It doesn't look like a PCI device. Does its parent - exist? */ - acpi_handle phandle; - if (acpi_get_parent(device->handle, &phandle)) - return -ENODEV; - dev = acpi_get_physical_device(phandle); - } - if (!dev) - return -ENODEV; - put_device(dev); - /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ @@ -1366,37 +1337,8 @@ acpi_video_bus_write_DOS(struct file *file, static int acpi_video_bus_add_fs(struct acpi_device *device) { - long device_id; - int status; struct proc_dir_entry *entry = NULL; struct acpi_video_bus *video; - struct device *dev; - - status = - acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); - - if (!ACPI_SUCCESS(status)) - return -ENODEV; - - /* We need to attempt to determine whether the _ADR refers to a - PCI device or not. There's no terribly good way to do this, - so the best we can hope for is to assume that there'll never - be a video device in the host bridge */ - if (device_id >= 0x10000) { - /* It looks like a PCI device. Does it exist? */ - dev = acpi_get_physical_device(device->handle); - } else { - /* It doesn't look like a PCI device. Does its parent - exist? */ - acpi_handle phandle; - if (acpi_get_parent(device->handle, &phandle)) - return -ENODEV; - dev = acpi_get_physical_device(phandle); - } - if (!dev) - return -ENODEV; - put_device(dev); - video = acpi_driver_data(device); diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e469647..25aba69 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -30,6 +30,7 @@ config ATA_NONSTANDARD config ATA_ACPI bool depends on ACPI && PCI + select ACPI_DOCK default y help This option adds support for ATA-related ACPI objects. diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index b6d230b..0d1d213 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -44,16 +44,6 @@ config MAC_FLOPPY If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple) floppy controller, say Y here. Most commonly found in PowerMacs. -config BLK_DEV_PS2 - tristate "PS/2 ESDI hard disk support" - depends on MCA && MCA_LEGACY && BROKEN - help - Say Y here if you have a PS/2 machine with a MCA bus and an ESDI - hard disk. - - To compile this driver as a module, choose M here: the - module will be called ps2esdi. - config AMIGA_Z2RAM tristate "Amiga Zorro II ramdisk support" depends on ZORRO diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 01c9724..5e58430 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o obj-$(CONFIG_BLK_DEV_RAM) += brd.o obj-$(CONFIG_BLK_DEV_LOOP) += loop.o -obj-$(CONFIG_BLK_DEV_PS2) += ps2esdi.o obj-$(CONFIG_BLK_DEV_XD) += xd.o obj-$(CONFIG_BLK_CPQ_DA) += cpqarray.o obj-$(CONFIG_BLK_CPQ_CISS_DA) += cciss.o diff --git a/drivers/block/ps2esdi.c b/drivers/block/ps2esdi.c deleted file mode 100644 index 3c796e2..0000000 --- a/drivers/block/ps2esdi.c +++ /dev/null @@ -1,1079 +0,0 @@ -/* ps2esdi driver based on assembler code by Arindam Banerji, - written by Peter De Schrijver */ -/* Reassuring note to IBM : This driver was NOT developed by vice-versa - engineering the PS/2's BIOS */ -/* Dedicated to Wannes, Tofke, Ykke, Godot, Killroy and all those - other lovely fish out there... */ -/* This code was written during the long and boring WINA - elections 1994 */ -/* Thanks to Arindam Banerij for giving me the source of his driver */ -/* This code may be freely distributed and modified in any way, - as long as these notes remain intact */ - -/* Revised: 05/07/94 by Arindam Banerji (axb@cse.nd.edu) */ -/* Revised: 09/08/94 by Peter De Schrijver (stud11@cc4.kuleuven.ac.be) - Thanks to Arindam Banerij for sending me the docs of the adapter */ - -/* BA Modified for ThinkPad 720 by Boris Ashkinazi */ -/* (bash@vnet.ibm.com) 08/08/95 */ - -/* Modified further for ThinkPad-720C by Uri Blumenthal */ -/* (uri@watson.ibm.com) Sep 11, 1995 */ - -/* TODO : - + Timeouts - + Get disk parameters - + DMA above 16MB - + reset after read/write error - */ - -#define DEVICE_NAME "PS/2 ESDI" - -#include <linux/major.h> -#include <linux/errno.h> -#include <linux/wait.h> -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/genhd.h> -#include <linux/ps2esdi.h> -#include <linux/blkdev.h> -#include <linux/mca-legacy.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/module.h> -#include <linux/hdreg.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/mca_dma.h> -#include <asm/uaccess.h> - -#define PS2ESDI_IRQ 14 -#define MAX_HD 2 -#define MAX_RETRIES 5 -#define MAX_16BIT 65536 -#define ESDI_TIMEOUT 0xf000 -#define ESDI_STAT_TIMEOUT 4 - -#define TYPE_0_CMD_BLK_LENGTH 2 -#define TYPE_1_CMD_BLK_LENGTH 4 - -static void reset_ctrl(void); - -static int ps2esdi_geninit(void); - -static void do_ps2esdi_request(struct request_queue * q); - -static void ps2esdi_readwrite(int cmd, struct request *req); - -static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd, -u_short cyl, u_short head, u_short sector, u_short length, u_char drive); - -static int ps2esdi_out_cmd_blk(u_short * cmd_blk); - -static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode); - -static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id); -static void (*current_int_handler) (u_int) = NULL; -static void ps2esdi_normal_interrupt_handler(u_int); -static void ps2esdi_initial_reset_int_handler(u_int); -static void ps2esdi_geometry_int_handler(u_int); -static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo); - -static int ps2esdi_read_status_words(int num_words, int max_words, u_short * buffer); - -static void dump_cmd_complete_status(u_int int_ret_code); - -static void ps2esdi_get_device_cfg(void); - -static void ps2esdi_reset_timer(unsigned long unused); - -static u_int dma_arb_level; /* DMA arbitration level */ - -static DECLARE_WAIT_QUEUE_HEAD(ps2esdi_int); - -static int no_int_yet; -static int ps2esdi_drives; -static u_short io_base; -static DEFINE_TIMER(esdi_timer, ps2esdi_reset_timer, 0, 0); -static int reset_status; -static int ps2esdi_slot = -1; -static int tp720esdi = 0; /* Is it Integrated ESDI of ThinkPad-720? */ -static int intg_esdi = 0; /* If integrated adapter */ -struct ps2esdi_i_struct { - unsigned int head, sect, cyl, wpcom, lzone, ctl; -}; -static DEFINE_SPINLOCK(ps2esdi_lock); -static struct request_queue *ps2esdi_queue; -static struct request *current_req; - -#if 0 -#if 0 /* try both - I don't know which one is better... UB */ -static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] = -{ - {4, 48, 1553, 0, 0, 0}, - {0, 0, 0, 0, 0, 0}}; -#else -static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] = -{ - {64, 32, 161, 0, 0, 0}, - {0, 0, 0, 0, 0, 0}}; -#endif -#endif -static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] = -{ - {0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0}}; - -static struct block_device_operations ps2esdi_fops = -{ - .owner = THIS_MODULE, - .getgeo = ps2esdi_getgeo, -}; - -static struct gendisk *ps2esdi_gendisk[2]; - -/* initialization routine called by ll_rw_blk.c */ -static int __init ps2esdi_init(void) -{ - - int error = 0; - - /* register the device - pass the name and major number */ - if (register_blkdev(PS2ESDI_MAJOR, "ed")) - return -EBUSY; - - /* set up some global information - indicating device specific info */ - ps2esdi_queue = blk_init_queue(do_ps2esdi_request, &ps2esdi_lock); - if (!ps2esdi_queue) { - unregister_blkdev(PS2ESDI_MAJOR, "ed"); - return -ENOMEM; - } - - /* some minor housekeeping - setup the global gendisk structure */ - error = ps2esdi_geninit(); - if (error) { - printk(KERN_WARNING "PS2ESDI: error initialising" - " device, releasing resources\n"); - unregister_blkdev(PS2ESDI_MAJOR, "ed"); - blk_cleanup_queue(ps2esdi_queue); - return error; - } - return 0; -} /* ps2esdi_init */ - -#ifndef MODULE - -module_init(ps2esdi_init); - -#else - -static int cyl[MAX_HD] = {-1,-1}; -static int head[MAX_HD] = {-1, -1}; -static int sect[MAX_HD] = {-1, -1}; - -module_param(tp720esdi, bool, 0); -module_param_array(cyl, int, NULL, 0); -module_param_array(head, int, NULL, 0); -module_param_array(sect, int, NULL, 0); -MODULE_LICENSE("GPL"); - -int init_module(void) { - int drive; - - for(drive = 0; drive < MAX_HD; drive++) { - struct ps2esdi_i_struct *info = &ps2esdi_info[drive]; - - if (cyl[drive] != -1) { - info->cyl = info->lzone = cyl[drive]; - info->wpcom = 0; - } - if (head[drive] != -1) { - info->head = head[drive]; - info->ctl = (head[drive] > 8 ? 8 : 0); - } - if (sect[drive] != -1) info->sect = sect[drive]; - } - return ps2esdi_init(); -} - -void -cleanup_module(void) { - int i; - if(ps2esdi_slot) { - mca_mark_as_unused(ps2esdi_slot); - mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL); - } - release_region(io_base, 4); - free_dma(dma_arb_level); - free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk); - unregister_blkdev(PS2ESDI_MAJOR, "ed"); - blk_cleanup_queue(ps2esdi_queue); - for (i = 0; i < ps2esdi_drives; i++) { - del_gendisk(ps2esdi_gendisk[i]); - put_disk(ps2esdi_gendisk[i]); - } -} -#endif /* MODULE */ - -/* handles boot time command line parameters */ -void __init tp720_setup(char *str, int *ints) -{ - /* no params, just sets the tp720esdi flag if it exists */ - - printk("%s: TP 720 ESDI flag set\n", DEVICE_NAME); - tp720esdi = 1; -} - -void __init ed_setup(char *str, int *ints) -{ - int hdind = 0; - - /* handles 3 parameters only - corresponding to - 1. Number of cylinders - 2. Number of heads - 3. Sectors/track - */ - - if (ints[0] != 3) - return; - - /* print out the information - seen at boot time */ - printk("%s: ints[0]=%d ints[1]=%d ints[2]=%d ints[3]=%d\n", - DEVICE_NAME, ints[0], ints[1], ints[2], ints[3]); - - /* set the index into device specific information table */ - if (ps2esdi_info[0].head != 0) - hdind = 1; - - /* set up all the device information */ - ps2esdi_info[hdind].head = ints[2]; - ps2esdi_info[hdind].sect = ints[3]; - ps2esdi_info[hdind].cyl = ints[1]; - ps2esdi_info[hdind].wpcom = 0; - ps2esdi_info[hdind].lzone = ints[1]; - ps2esdi_info[hdind].ctl = (ints[2] > 8 ? 8 : 0); -#if 0 /* this may be needed for PS2/Mod.80, but it hurts ThinkPad! */ - ps2esdi_drives = hdind + 1; /* increment index for the next time */ -#endif -} /* ed_setup */ - -static int ps2esdi_getinfo(char *buf, int slot, void *d) -{ - int len = 0; - - len += sprintf(buf + len, "DMA Arbitration Level: %d\n", - dma_arb_level); - len += sprintf(buf + len, "IO Port: %x\n", io_base); - len += sprintf(buf + len, "IRQ: 14\n"); - len += sprintf(buf + len, "Drives: %d\n", ps2esdi_drives); - - return len; -} - -/* ps2 esdi specific initialization - called thru the gendisk chain */ -static int __init ps2esdi_geninit(void) -{ - /* - The first part contains the initialization code - for the ESDI disk subsystem. All we really do - is search for the POS registers of the controller - to do some simple setup operations. First, we - must ensure that the controller is installed, - enabled, and configured as PRIMARY. Then we must - determine the DMA arbitration level being used by - the controller so we can handle data transfer - operations properly. If all of this works, then - we will set the INIT_FLAG to a non-zero value. - */ - - int slot = 0, i, reset_start, reset_end; - u_char status; - unsigned short adapterID; - int error = 0; - - if ((slot = mca_find_adapter(INTG_ESDI_ID, 0)) != MCA_NOTFOUND) { - adapterID = INTG_ESDI_ID; - printk("%s: integrated ESDI adapter found in slot %d\n", - DEVICE_NAME, slot+1); -#ifndef MODULE - mca_set_adapter_name(slot, "PS/2 Integrated ESDI"); -#endif - } else if ((slot = mca_find_adapter(NRML_ESDI_ID, 0)) != -1) { - adapterID = NRML_ESDI_ID; - printk("%s: normal ESDI adapter found in slot %d\n", - DEVICE_NAME, slot+1); - mca_set_adapter_name(slot, "PS/2 ESDI"); - } else { - return -ENODEV; - } - - ps2esdi_slot = slot; - mca_mark_as_used(slot); - mca_set_adapter_procfn(slot, (MCA_ProcFn) ps2esdi_getinfo, NULL); - - /* Found the slot - read the POS register 2 to get the necessary - configuration and status information. POS register 2 has the - following information : - Bit Function - 7 reserved = 0 - 6 arbitration method - 0 - fairness enabled - 1 - fairness disabled, linear priority assignment - 5-2 arbitration level - 1 alternate address - 1 alternate address - 0 - use addresses 0x3510 - 0x3517 - 0 adapter enable - */ - - status = mca_read_stored_pos(slot, 2); - /* is it enabled ? */ - if (!(status & STATUS_ENABLED)) { - printk("%s: ESDI adapter disabled\n", DEVICE_NAME); - error = -ENODEV; - goto err_out1; - } - /* try to grab IRQ, and try to grab a slow IRQ if it fails, so we can - share with the SCSI driver */ - if (request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler, - IRQF_DISABLED | IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk) - && request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler, - IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk) - ) { - printk("%s: Unable to get IRQ %d\n", DEVICE_NAME, PS2ESDI_IRQ); - error = -EBUSY; - goto err_out1; - } - if (status & STATUS_ALTERNATE) - io_base = ALT_IO_BASE; - else - io_base = PRIMARY_IO_BASE; - - if (!request_region(io_base, 4, "ed")) { - printk(KERN_WARNING"Unable to request region 0x%x\n", io_base); - error = -EBUSY; - goto err_out2; - } - /* get the dma arbitration level */ - dma_arb_level = (status >> 2) & 0xf; - - /* BA */ - printk("%s: DMA arbitration level : %d\n", - DEVICE_NAME, dma_arb_level); - - LITE_ON; - current_int_handler = ps2esdi_initial_reset_int_handler; - reset_ctrl(); - reset_status = 0; - reset_start = jiffies; - while (!reset_status) { - init_timer(&esdi_timer); - esdi_timer.expires = jiffies + HZ; - esdi_timer.data = 0; - add_timer(&esdi_timer); - sleep_on(&ps2esdi_int); - } - reset_end = jiffies; - LITE_OFF; - printk("%s: reset interrupt after %d jiffies, %u.%02u secs\n", - DEVICE_NAME, reset_end - reset_start, (reset_end - reset_start) / HZ, - (reset_end - reset_start) % HZ); - - - /* Integrated ESDI Disk and Controller has only one drive! */ - if (adapterID == INTG_ESDI_ID) {/* if not "normal" PS2 ESDI adapter */ - ps2esdi_drives = 1; /* then we have only one physical disk! */ intg_esdi = 1; - } - - - - /* finally this part sets up some global data structures etc. */ - - ps2esdi_get_device_cfg(); - - /* some annoyance in the above routine returns TWO drives? - Is something else happining in the background? - Regaurdless we fix the # of drives again. AJK */ - /* Integrated ESDI Disk and Controller has only one drive! */ - if (adapterID == INTG_ESDI_ID) /* if not "normal" PS2 ESDI adapter */ - ps2esdi_drives = 1; /* Not three or two, ONE DAMNIT! */ - - current_int_handler = ps2esdi_normal_interrupt_handler; - - if (request_dma(dma_arb_level, "ed") !=0) { - printk(KERN_WARNING "PS2ESDI: Can't request dma-channel %d\n" - ,(int) dma_arb_level); - error = -EBUSY; - goto err_out3; - } - blk_queue_max_sectors(ps2esdi_queue, 128); - - error = -ENOMEM; - for (i = 0; i < ps2esdi_drives; i++) { - struct gendisk *disk = alloc_disk(64); - if (!disk) - goto err_out4; - disk->major = PS2ESDI_MAJOR; - disk->first_minor = i<<6; - sprintf(disk->disk_name, "ed%c", 'a'+i); - disk->fops = &ps2esdi_fops; - ps2esdi_gendisk[i] = disk; - } - - for (i = 0; i < ps2esdi_drives; i++) { - struct gendisk *disk = ps2esdi_gendisk[i]; - set_capacity(disk, ps2esdi_info[i].head * ps2esdi_info[i].sect * - ps2esdi_info[i].cyl); - disk->queue = ps2esdi_queue; - disk->private_data = &ps2esdi_info[i]; - add_disk(disk); - } - return 0; -err_out4: - while (i--) - put_disk(ps2esdi_gendisk[i]); -err_out3: - release_region(io_base, 4); -err_out2: - free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk); -err_out1: - if(ps2esdi_slot) { - mca_mark_as_unused(ps2esdi_slot); - mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL); - } - return error; -} - -static void __init ps2esdi_get_device_cfg(void) -{ - u_short cmd_blk[TYPE_0_CMD_BLK_LENGTH]; - - /*BA */ printk("%s: Drive 0\n", DEVICE_NAME); - current_int_handler = ps2esdi_geometry_int_handler; - cmd_blk[0] = CMD_GET_DEV_CONFIG | 0x600; - cmd_blk[1] = 0; - no_int_yet = TRUE; - ps2esdi_out_cmd_blk(cmd_blk); - if (no_int_yet) - sleep_on(&ps2esdi_int); - - if (ps2esdi_drives > 1) { - printk("%s: Drive 1\n", DEVICE_NAME); /*BA */ - cmd_blk[0] = CMD_GET_DEV_CONFIG | (1 << 5) | 0x600; - cmd_blk[1] = 0; - no_int_yet = TRUE; - ps2esdi_out_cmd_blk(cmd_blk); - if (no_int_yet) - sleep_on(&ps2esdi_int); - } /* if second physical drive is present */ - return; -} - -/* strategy routine that handles most of the IO requests */ -static void do_ps2esdi_request(struct request_queue * q) -{ - struct request *req; - /* since, this routine is called with interrupts cleared - they - must be before it finishes */ - - req = elv_next_request(q); - if (!req) - return; - -#if 0 - printk("%s:got request. device : %s command : %d sector : %ld count : %ld, buffer: %p\n", - DEVICE_NAME, - req->rq_disk->disk_name, - req->cmd, req->sector, - req->current_nr_sectors, req->buffer); -#endif - - /* check for above 16Mb dmas */ - if (isa_virt_to_bus(req->buffer + req->current_nr_sectors * 512) > 16 * MB) { - printk("%s: DMA above 16MB not supported\n", DEVICE_NAME); - end_request(req, FAIL); - return; - } - - if (req->sector+req->current_nr_sectors > get_capacity(req->rq_disk)) { - printk("Grrr. error. ps2esdi_drives: %d, %llu %llu\n", - ps2esdi_drives, req->sector, - (unsigned long long)get_capacity(req->rq_disk)); - end_request(req, FAIL); - return; - } - - switch (rq_data_dir(req)) { - case READ: - ps2esdi_readwrite(READ, req); - break; - case WRITE: - ps2esdi_readwrite(WRITE, req); - break; - default: - printk("%s: Unknown command\n", req->rq_disk->disk_name); - end_request(req, FAIL); - break; - } /* handle different commands */ -} /* main strategy routine */ - -/* resets the ESDI adapter */ -static void reset_ctrl(void) -{ - - u_long expire; - u_short status; - - /* enable interrupts on the controller */ - status = inb(ESDI_INTRPT); - outb((status & 0xe0) | ATT_EOI, ESDI_ATTN); /* to be sure we don't have - any interrupt pending... */ - outb_p(CTRL_ENABLE_INTR, ESDI_CONTROL); - - /* read the ESDI status port - if the controller is not busy, - simply do a soft reset (fast) - otherwise we'll have to do a - hard (slow) reset. */ - if (!(inb_p(ESDI_STATUS) & STATUS_BUSY)) { - /*BA */ printk("%s: soft reset...\n", DEVICE_NAME); - outb_p(CTRL_SOFT_RESET, ESDI_ATTN); - } - /* soft reset */ - else { - /*BA */ - printk("%s: hard reset...\n", DEVICE_NAME); - outb_p(CTRL_HARD_RESET, ESDI_CONTROL); - expire = jiffies + 2*HZ; - while (time_before(jiffies, expire)); - outb_p(1, ESDI_CONTROL); - } /* hard reset */ - - -} /* reset the controller */ - -/* called by the strategy routine to handle read and write requests */ -static void ps2esdi_readwrite(int cmd, struct request *req) -{ - struct ps2esdi_i_struct *p = req->rq_disk->private_data; - unsigned block = req->sector; - unsigned count = req->current_nr_sectors; - int drive = p - ps2esdi_info; - u_short track, head, cylinder, sector; - u_short cmd_blk[TYPE_1_CMD_BLK_LENGTH]; - - /* do some relevant arithmatic */ - track = block / p->sect; - head = track % p->head; - cylinder = track / p->head; - sector = block % p->sect; - -#if 0 - printk("%s: cyl=%d head=%d sect=%d\n", DEVICE_NAME, cylinder, head, sector); -#endif - /* call the routine that actually fills out a command block */ - ps2esdi_fill_cmd_block - (cmd_blk, - (cmd == READ) ? CMD_READ : CMD_WRITE, - cylinder, head, sector, count, drive); - - /* send the command block to the controller */ - current_req = req; - spin_unlock_irq(&ps2esdi_lock); - if (ps2esdi_out_cmd_blk(cmd_blk)) { - spin_lock_irq(&ps2esdi_lock); - printk("%s: Controller failed\n", DEVICE_NAME); - if ((++req->errors) >= MAX_RETRIES) - end_request(req, FAIL); - } - /* check for failure to put out the command block */ - else { - spin_lock_irq(&ps2esdi_lock); -#if 0 - printk("%s: waiting for xfer\n", DEVICE_NAME); -#endif - /* turn disk lights on */ - LITE_ON; - } - -} /* ps2esdi_readwrite */ - -/* fill out the command block */ -static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd, - u_short cyl, u_short head, u_short sector, u_short length, u_char drive) -{ - - cmd_blk[0] = (drive << 5) | cmd; - cmd_blk[1] = length; - cmd_blk[2] = ((cyl & 0x1f) << 11) | (head << 5) | sector; - cmd_blk[3] = (cyl & 0x3E0) >> 5; - -} /* fill out the command block */ - -/* write a command block to the controller */ -static int ps2esdi_out_cmd_blk(u_short * cmd_blk) -{ - - int i; - unsigned long jif; - u_char status; - - /* enable interrupts */ - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - - /* do not write to the controller, if it is busy */ - for (jif = jiffies + ESDI_STAT_TIMEOUT; - time_after(jif, jiffies) && - (inb(ESDI_STATUS) & STATUS_BUSY); ) - ; - -#if 0 - printk("%s: i(1)=%ld\n", DEVICE_NAME, jif); -#endif - - /* if device is still busy - then just time out */ - if (inb(ESDI_STATUS) & STATUS_BUSY) { - printk("%s: ps2esdi_out_cmd timed out (1)\n", DEVICE_NAME); - return ERROR; - } /* timeout ??? */ - /* Set up the attention register in the controller */ - outb(((*cmd_blk) & 0xE0) | 1, ESDI_ATTN); - -#if 0 - printk("%s: sending %d words to controller\n", DEVICE_NAME, (((*cmd_blk) >> 14) + 1) << 1); -#endif - - /* one by one send each word out */ - for (i = (((*cmd_blk) >> 14) + 1) << 1; i; i--) { - status = inb(ESDI_STATUS); - for (jif = jiffies + ESDI_STAT_TIMEOUT; - time_after(jif, jiffies) && (status & STATUS_BUSY) && - (status & STATUS_CMD_INF); status = inb(ESDI_STATUS)); - if ((status & (STATUS_BUSY | STATUS_CMD_INF)) == STATUS_BUSY) { -#if 0 - printk("%s: sending %04X\n", DEVICE_NAME, *cmd_blk); -#endif - outw(*cmd_blk++, ESDI_CMD_INT); - } else { - printk("%s: ps2esdi_out_cmd timed out while sending command (status=%02X)\n", - DEVICE_NAME, status); - return ERROR; - } - } /* send all words out */ - return OK; -} /* send out the commands */ - - -/* prepare for dma - do all the necessary setup */ -static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode) -{ - unsigned long flags = claim_dma_lock(); - - mca_disable_dma(dma_arb_level); - - mca_set_dma_addr(dma_arb_level, isa_virt_to_bus(buffer)); - - mca_set_dma_count(dma_arb_level, length * 512 / 2); - - mca_set_dma_mode(dma_arb_level, dma_xmode); - - mca_enable_dma(dma_arb_level); - - release_dma_lock(flags); - -} /* prepare for dma */ - - - -static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id) -{ - u_int int_ret_code; - - if (inb(ESDI_STATUS) & STATUS_INTR) { - int_ret_code = inb(ESDI_INTRPT); - if (current_int_handler) { - /* Disable adapter interrupts till processing is finished */ - outb(CTRL_DISABLE_INTR, ESDI_CONTROL); - current_int_handler(int_ret_code); - } else - printk("%s: help ! No interrupt handler.\n", DEVICE_NAME); - } else { - return IRQ_NONE; - } - return IRQ_HANDLED; -} - -static void ps2esdi_initial_reset_int_handler(u_int int_ret_code) -{ - - switch (int_ret_code & 0xf) { - case INT_RESET: - /*BA */ - printk("%s: initial reset completed.\n", DEVICE_NAME); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - wake_up(&ps2esdi_int); - break; - case INT_ATTN_ERROR: - printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME, - int_ret_code); - printk("%s: status: %02x\n", DEVICE_NAME, inb(ESDI_STATUS)); - break; - default: - printk("%s: initial reset handler received interrupt: %02X\n", - DEVICE_NAME, int_ret_code); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - break; - } - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); -} - - -static void ps2esdi_geometry_int_handler(u_int int_ret_code) -{ - u_int status, drive_num; - unsigned long rba; - int i; - - drive_num = int_ret_code >> 5; - switch (int_ret_code & 0xf) { - case INT_CMD_COMPLETE: - for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--); - if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { - printk("%s: timeout reading status word\n", DEVICE_NAME); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - break; - } - status = inw(ESDI_STT_INT); - if ((status & 0x1F) == CMD_GET_DEV_CONFIG) { -#define REPLY_WORDS 5 /* we already read word 0 */ - u_short reply[REPLY_WORDS]; - - if (ps2esdi_read_status_words((status >> 8) - 1, REPLY_WORDS, reply)) { - /*BA */ - printk("%s: Device Configuration Status for drive %u\n", - DEVICE_NAME, drive_num); - - printk("%s: Spares/cyls: %u", DEVICE_NAME, reply[0] >> 8); - - printk - ("Config bits: %s%s%s%s%s\n", - (reply[0] & CONFIG_IS) ? "Invalid Secondary, " : "", - ((reply[0] & CONFIG_ZD) && !(reply[0] & CONFIG_IS)) - ? "Zero Defect, " : "Defects Present, ", - (reply[0] & CONFIG_SF) ? "Skewed Format, " : "", - (reply[0] & CONFIG_FR) ? "Removable, " : "Non-Removable, ", - (reply[0] & CONFIG_RT) ? "No Retries" : "Retries"); - - rba = reply[1] | ((unsigned long) reply[2] << 16); - printk("%s: Number of RBA's: %lu\n", DEVICE_NAME, rba); - - printk("%s: Physical number of cylinders: %u, Sectors/Track: %u, Heads: %u\n", - DEVICE_NAME, reply[3], reply[4] >> 8, reply[4] & 0xff); - - if (!ps2esdi_info[drive_num].head) { - ps2esdi_info[drive_num].head = 64; - ps2esdi_info[drive_num].sect = 32; - ps2esdi_info[drive_num].cyl = rba / (64 * 32); - ps2esdi_info[drive_num].wpcom = 0; - ps2esdi_info[drive_num].lzone = ps2esdi_info[drive_num].cyl; - ps2esdi_info[drive_num].ctl = 8; - if (tp720esdi) { /* store the retrieved parameters */ - ps2esdi_info[0].head = reply[4] & 0Xff; - ps2esdi_info[0].sect = reply[4] >> 8; - ps2esdi_info[0].cyl = reply[3]; - ps2esdi_info[0].wpcom = 0; - ps2esdi_info[0].lzone = reply[3]; - } else { - if (!intg_esdi) - ps2esdi_drives++; - } - } -#ifdef OBSOLETE - if (!ps2esdi_info[drive_num].head) { - ps2esdi_info[drive_num].head = reply[4] & 0Xff; - ps2esdi_info[drive_num].sect = reply[4] >> 8; - ps2esdi_info[drive_num].cyl = reply[3]; - ps2esdi_info[drive_num].wpcom = 0; - ps2esdi_info[drive_num].lzone = reply[3]; - if (tp720esdi) { /* store the retrieved parameters */ - ps2esdi_info[0].head = reply[4] & 0Xff; - ps2esdi_info[0].sect = reply[4] >> 8; - ps2esdi_info[0].cyl = reply[3]; - ps2esdi_info[0].wpcom = 0; - ps2esdi_info[0].lzone = reply[3]; - } else { - ps2esdi_drives++; - } - } -#endif - - } else - printk("%s: failed while getting device config\n", DEVICE_NAME); -#undef REPLY_WORDS - } else - printk("%s: command %02X unknown by geometry handler\n", - DEVICE_NAME, status & 0x1f); - - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - break; - - case INT_ATTN_ERROR: - printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME, - int_ret_code); - printk("%s: Device not available\n", DEVICE_NAME); - break; - case INT_CMD_ECC: - case INT_CMD_RETRY: - case INT_CMD_ECC_RETRY: - case INT_CMD_WARNING: - case INT_CMD_ABORT: - case INT_CMD_FAILED: - case INT_DMA_ERR: - case INT_CMD_BLK_ERR: - /*BA */ printk("%s: Whaa. Error occurred...\n", DEVICE_NAME); - dump_cmd_complete_status(int_ret_code); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - break; - default: - printk("%s: Unknown interrupt reason: %02X\n", - DEVICE_NAME, int_ret_code & 0xf); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - break; - } - - wake_up(&ps2esdi_int); - no_int_yet = FALSE; - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - -} - -static void ps2esdi_normal_interrupt_handler(u_int int_ret_code) -{ - unsigned long flags; - u_int status; - u_int ending; - int i; - - switch (int_ret_code & 0x0f) { - case INT_TRANSFER_REQ: - ps2esdi_prep_dma(current_req->buffer, - current_req->current_nr_sectors, - (rq_data_dir(current_req) == READ) - ? MCA_DMA_MODE_16 | MCA_DMA_MODE_WRITE | MCA_DMA_MODE_XFER - : MCA_DMA_MODE_16 | MCA_DMA_MODE_READ); - outb(CTRL_ENABLE_DMA | CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = -1; - break; - - case INT_ATTN_ERROR: - printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME, - int_ret_code); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = FAIL; - break; - - case INT_CMD_COMPLETE: - for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--); - if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { - printk("%s: timeout reading status word\n", DEVICE_NAME); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - if ((++current_req->errors) >= MAX_RETRIES) - ending = FAIL; - else - ending = -1; - break; - } - status = inw(ESDI_STT_INT); - switch (status & 0x1F) { - case (CMD_READ & 0xff): - case (CMD_WRITE & 0xff): - LITE_OFF; - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = SUCCES; - break; - default: - printk("%s: interrupt for unknown command %02X\n", - DEVICE_NAME, status & 0x1f); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = -1; - break; - } - break; - case INT_CMD_ECC: - case INT_CMD_RETRY: - case INT_CMD_ECC_RETRY: - LITE_OFF; - dump_cmd_complete_status(int_ret_code); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = SUCCES; - break; - case INT_CMD_WARNING: - case INT_CMD_ABORT: - case INT_CMD_FAILED: - case INT_DMA_ERR: - LITE_OFF; - dump_cmd_complete_status(int_ret_code); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - if ((++current_req->errors) >= MAX_RETRIES) - ending = FAIL; - else - ending = -1; - break; - - case INT_CMD_BLK_ERR: - dump_cmd_complete_status(int_ret_code); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = FAIL; - break; - - case INT_CMD_FORMAT: - printk("%s: huh ? Who issued this format command ?\n" - ,DEVICE_NAME); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = -1; - break; - - case INT_RESET: - /* BA printk("%s: reset completed.\n", DEVICE_NAME) */ ; - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = -1; - break; - - default: - printk("%s: Unknown interrupt reason: %02X\n", - DEVICE_NAME, int_ret_code & 0xf); - outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - ending = -1; - break; - } - if(ending != -1) { - spin_lock_irqsave(&ps2esdi_lock, flags); - end_request(current_req, ending); - current_req = NULL; - do_ps2esdi_request(ps2esdi_queue); - spin_unlock_irqrestore(&ps2esdi_lock, flags); - } -} /* handle interrupts */ - - - -static int ps2esdi_read_status_words(int num_words, - int max_words, - u_short * buffer) -{ - int i; - - for (; max_words && num_words; max_words--, num_words--, buffer++) { - for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--); - if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { - printk("%s: timeout reading status word\n", DEVICE_NAME); - return FAIL; - } - *buffer = inw(ESDI_STT_INT); - } - return SUCCES; -} - - - - -static void dump_cmd_complete_status(u_int int_ret_code) -{ -#define WAIT_FOR_STATUS \ - for(i=ESDI_TIMEOUT;i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL);i--); \ - if(!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { \ - printk("%s: timeout reading status word\n",DEVICE_NAME); \ - return; \ - } - - int i, word_count; - u_short stat_word; - u_long rba; - - printk("%s: Device: %u, interrupt ID: %02X\n", - DEVICE_NAME, int_ret_code >> 5, - int_ret_code & 0xf); - - WAIT_FOR_STATUS; - stat_word = inw(ESDI_STT_INT); - word_count = (stat_word >> 8) - 1; - printk("%s: %u status words, command: %02X\n", DEVICE_NAME, word_count, - stat_word & 0xff); - - if (word_count--) { - WAIT_FOR_STATUS; - stat_word = inw(ESDI_STT_INT); - printk("%s: command status code: %02X, command error code: %02X\n", - DEVICE_NAME, stat_word >> 8, stat_word & 0xff); - } - if (word_count--) { - WAIT_FOR_STATUS; - stat_word = inw(ESDI_STT_INT); - printk("%s: device error code: %s%s%s%s%s,%02X\n", DEVICE_NAME, - (stat_word & 0x1000) ? "Ready, " : "Not Ready, ", - (stat_word & 0x0800) ? "Selected, " : "Not Selected, ", - (stat_word & 0x0400) ? "Write Fault, " : "", - (stat_word & 0x0200) ? "Track 0, " : "", - (stat_word & 0x0100) ? "Seek or command complete, " : "", - stat_word >> 8); - } - if (word_count--) { - WAIT_FOR_STATUS; - stat_word = inw(ESDI_STT_INT); - printk("%s: Blocks to do: %u", DEVICE_NAME, stat_word); - } - if (word_count -= 2) { - WAIT_FOR_STATUS; - rba = inw(ESDI_STT_INT); - WAIT_FOR_STATUS; - rba |= inw(ESDI_STT_INT) << 16; - printk(", Last Cyl: %u Head: %u Sector: %u\n", - (u_short) ((rba & 0x1ff80000) >> 11), - (u_short) ((rba & 0x7E0) >> 5), (u_short) (rba & 0x1f)); - } else - printk("\n"); - - if (word_count--) { - WAIT_FOR_STATUS; - stat_word = inw(ESDI_STT_INT); - printk("%s: Blocks required ECC: %u", DEVICE_NAME, stat_word); - } - printk("\n"); - -#undef WAIT_FOR_STATUS - -} - -static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct ps2esdi_i_struct *p = bdev->bd_disk->private_data; - - geo->heads = p->head; - geo->sectors = p->sect; - geo->cylinders = p->cyl; - return 0; -} - -static void ps2esdi_reset_timer(unsigned long unused) -{ - - int status; - - status = inb(ESDI_INTRPT); - if ((status & 0xf) == INT_RESET) { - outb((status & 0xe0) | ATT_EOI, ESDI_ATTN); - outb(CTRL_ENABLE_INTR, ESDI_CONTROL); - reset_status = 1; - } - wake_up(&ps2esdi_int); -} diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c index d352dbb..e5a0e97 100644 --- a/drivers/char/drm/ati_pcigart.c +++ b/drivers/char/drm/ati_pcigart.c @@ -35,42 +35,23 @@ # define ATI_PCIGART_PAGE_SIZE 4096 /**< PCI GART page size */ -static void *drm_ati_alloc_pcigart_table(int order) +static int drm_ati_alloc_pcigart_table(struct drm_device *dev, + struct drm_ati_pcigart_info *gart_info) { - unsigned long address; - struct page *page; - int i; - - DRM_DEBUG("%d order\n", order); - - address = __get_free_pages(GFP_KERNEL | __GFP_COMP, - order); - if (address == 0UL) { - return NULL; - } - - page = virt_to_page(address); + gart_info->table_handle = drm_pci_alloc(dev, gart_info->table_size, + PAGE_SIZE, + gart_info->table_mask); + if (gart_info->table_handle == NULL) + return -ENOMEM; - for (i = 0; i < order; i++, page++) - SetPageReserved(page); - - DRM_DEBUG("returning 0x%08lx\n", address); - return (void *)address; + return 0; } -static void drm_ati_free_pcigart_table(void *address, int order) +static void drm_ati_free_pcigart_table(struct drm_device *dev, + struct drm_ati_pcigart_info *gart_info) { - struct page *page; - int i; - int num_pages = 1 << order; - DRM_DEBUG("\n"); - - page = virt_to_page((unsigned long)address); - - for (i = 0; i < num_pages; i++, page++) - ClearPageReserved(page); - - free_pages((unsigned long)address, order); + drm_pci_free(dev, gart_info->table_handle); + gart_info->table_handle = NULL; } int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info *gart_info) @@ -78,8 +59,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info struct drm_sg_mem *entry = dev->sg; unsigned long pages; int i; - int order; - int num_pages, max_pages; + int max_pages; /* we need to support large memory configurations */ if (!entry) { @@ -87,15 +67,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info return 0; } - order = drm_order((gart_info->table_size + (PAGE_SIZE-1)) / PAGE_SIZE); - num_pages = 1 << order; - if (gart_info->bus_addr) { - if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) { - pci_unmap_single(dev->pdev, gart_info->bus_addr, - num_pages * PAGE_SIZE, - PCI_DMA_TODEVICE); - } max_pages = (gart_info->table_size / sizeof(u32)); pages = (entry->pages <= max_pages) @@ -112,10 +84,9 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info gart_info->bus_addr = 0; } - if (gart_info->gart_table_location == DRM_ATI_GART_MAIN - && gart_info->addr) { - drm_ati_free_pcigart_table(gart_info->addr, order); - gart_info->addr = NULL; + if (gart_info->gart_table_location == DRM_ATI_GART_MAIN && + gart_info->table_handle) { + drm_ati_free_pcigart_table(dev, gart_info); } return 1; @@ -127,11 +98,10 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga struct drm_sg_mem *entry = dev->sg; void *address = NULL; unsigned long pages; - u32 *pci_gart, page_base, bus_address = 0; + u32 *pci_gart, page_base; + dma_addr_t bus_address = 0; int i, j, ret = 0; - int order; int max_pages; - int num_pages; if (!entry) { DRM_ERROR("no scatter/gather memory!\n"); @@ -141,31 +111,14 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) { DRM_DEBUG("PCI: no table in VRAM: using normal RAM\n"); - order = drm_order((gart_info->table_size + - (PAGE_SIZE-1)) / PAGE_SIZE); - num_pages = 1 << order; - address = drm_ati_alloc_pcigart_table(order); - if (!address) { + ret = drm_ati_alloc_pcigart_table(dev, gart_info); + if (ret) { DRM_ERROR("cannot allocate PCI GART page!\n"); goto done; } - if (!dev->pdev) { - DRM_ERROR("PCI device unknown!\n"); - goto done; - } - - bus_address = pci_map_single(dev->pdev, address, - num_pages * PAGE_SIZE, - PCI_DMA_TODEVICE); - if (bus_address == 0) { - DRM_ERROR("unable to map PCIGART pages!\n"); - order = drm_order((gart_info->table_size + - (PAGE_SIZE-1)) / PAGE_SIZE); - drm_ati_free_pcigart_table(address, order); - address = NULL; - goto done; - } + address = gart_info->table_handle->vaddr; + bus_address = gart_info->table_handle->busaddr; } else { address = gart_info->addr; bus_address = gart_info->bus_addr; diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index a6789f2..8ea9dd1 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -54,6 +54,7 @@ #include <linux/pci.h> #include <linux/jiffies.h> #include <linux/smp_lock.h> /* For (un)lock_kernel */ +#include <linux/dma-mapping.h> #include <linux/mm.h> #include <linux/cdev.h> #include <linux/mutex.h> @@ -551,6 +552,8 @@ struct drm_ati_pcigart_info { int gart_reg_if; void *addr; dma_addr_t bus_addr; + dma_addr_t table_mask; + struct drm_dma_handle *table_handle; drm_local_map_t mapping; int table_size; }; diff --git a/drivers/char/drm/drm_fops.c b/drivers/char/drm/drm_fops.c index 3992f73..f09d4b5 100644 --- a/drivers/char/drm/drm_fops.c +++ b/drivers/char/drm/drm_fops.c @@ -326,6 +326,7 @@ int drm_release(struct inode *inode, struct file *filp) struct drm_file *file_priv = filp->private_data; struct drm_device *dev = file_priv->head->dev; int retcode = 0; + unsigned long irqflags; lock_kernel(); @@ -357,9 +358,11 @@ int drm_release(struct inode *inode, struct file *filp) */ do{ - spin_lock(&dev->lock.spinlock); + spin_lock_irqsave(&dev->lock.spinlock, + irqflags); locked = dev->lock.idle_has_lock; - spin_unlock(&dev->lock.spinlock); + spin_unlock_irqrestore(&dev->lock.spinlock, + irqflags); if (locked) break; schedule(); diff --git a/drivers/char/drm/drm_lock.c b/drivers/char/drm/drm_lock.c index bea2a7d..12dcdd1 100644 --- a/drivers/char/drm/drm_lock.c +++ b/drivers/char/drm/drm_lock.c @@ -53,6 +53,7 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) DECLARE_WAITQUEUE(entry, current); struct drm_lock *lock = data; int ret = 0; + unsigned long irqflags; ++file_priv->lock_count; @@ -71,9 +72,9 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) return -EINVAL; add_wait_queue(&dev->lock.lock_queue, &entry); - spin_lock(&dev->lock.spinlock); + spin_lock_irqsave(&dev->lock.spinlock, irqflags); dev->lock.user_waiters++; - spin_unlock(&dev->lock.spinlock); + spin_unlock_irqrestore(&dev->lock.spinlock, irqflags); for (;;) { __set_current_state(TASK_INTERRUPTIBLE); if (!dev->lock.hw_lock) { @@ -95,9 +96,9 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) break; } } - spin_lock(&dev->lock.spinlock); + spin_lock_irqsave(&dev->lock.spinlock, irqflags); dev->lock.user_waiters--; - spin_unlock(&dev->lock.spinlock); + spin_unlock_irqrestore(&dev->lock.spinlock, irqflags); __set_current_state(TASK_RUNNING); remove_wait_queue(&dev->lock.lock_queue, &entry); @@ -198,8 +199,9 @@ int drm_lock_take(struct drm_lock_data *lock_data, { unsigned int old, new, prev; volatile unsigned int *lock = &lock_data->hw_lock->lock; + unsigned long irqflags; - spin_lock(&lock_data->spinlock); + spin_lock_irqsave(&lock_data->spinlock, irqflags); do { old = *lock; if (old & _DRM_LOCK_HELD) @@ -211,7 +213,7 @@ int drm_lock_take(struct drm_lock_data *lock_data, } prev = cmpxchg(lock, old, new); } while (prev != old); - spin_unlock(&lock_data->spinlock); + spin_unlock_irqrestore(&lock_data->spinlock, irqflags); if (_DRM_LOCKING_CONTEXT(old) == context) { if (old & _DRM_LOCK_HELD) { @@ -272,15 +274,16 @@ int drm_lock_free(struct drm_lock_data *lock_data, unsigned int context) { unsigned int old, new, prev; volatile unsigned int *lock = &lock_data->hw_lock->lock; + unsigned long irqflags; - spin_lock(&lock_data->spinlock); + spin_lock_irqsave(&lock_data->spinlock, irqflags); if (lock_data->kernel_waiters != 0) { drm_lock_transfer(lock_data, 0); lock_data->idle_has_lock = 1; - spin_unlock(&lock_data->spinlock); + spin_unlock_irqrestore(&lock_data->spinlock, irqflags); return 1; } - spin_unlock(&lock_data->spinlock); + spin_unlock_irqrestore(&lock_data->spinlock, irqflags); do { old = *lock; @@ -344,19 +347,20 @@ static int drm_notifier(void *priv) void drm_idlelock_take(struct drm_lock_data *lock_data) { int ret = 0; + unsigned long irqflags; - spin_lock(&lock_data->spinlock); + spin_lock_irqsave(&lock_data->spinlock, irqflags); lock_data->kernel_waiters++; if (!lock_data->idle_has_lock) { - spin_unlock(&lock_data->spinlock); + spin_unlock_irqrestore(&lock_data->spinlock, irqflags); ret = drm_lock_take(lock_data, DRM_KERNEL_CONTEXT); - spin_lock(&lock_data->spinlock); + spin_lock_irqsave(&lock_data->spinlock, irqflags); if (ret == 1) lock_data->idle_has_lock = 1; } - spin_unlock(&lock_data->spinlock); + spin_unlock_irqrestore(&lock_data->spinlock, irqflags); } EXPORT_SYMBOL(drm_idlelock_take); @@ -364,8 +368,9 @@ void drm_idlelock_release(struct drm_lock_data *lock_data) { unsigned int old, prev; volatile unsigned int *lock = &lock_data->hw_lock->lock; + unsigned long irqflags; - spin_lock(&lock_data->spinlock); + spin_lock_irqsave(&lock_data->spinlock, irqflags); if (--lock_data->kernel_waiters == 0) { if (lock_data->idle_has_lock) { do { @@ -376,7 +381,7 @@ void drm_idlelock_release(struct drm_lock_data *lock_data) lock_data->idle_has_lock = 0; } } - spin_unlock(&lock_data->spinlock); + spin_unlock_irqrestore(&lock_data->spinlock, irqflags); } EXPORT_SYMBOL(drm_idlelock_release); diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 715b361..a6a499f 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -205,9 +205,9 @@ {0x1002, 0x71D6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x71DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ {0x1002, 0x71DE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x7200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x7210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x7211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7244, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ @@ -238,6 +238,7 @@ {0x1002, 0x7834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x791e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ + {0x1002, 0x791f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ {0, 0, 0} #define r128_PCI_IDS \ diff --git a/drivers/char/drm/r128_cce.c b/drivers/char/drm/r128_cce.c index 892e0a5..f36adbd 100644 --- a/drivers/char/drm/r128_cce.c +++ b/drivers/char/drm/r128_cce.c @@ -558,6 +558,7 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init) #if __OS_HAS_AGP if (dev_priv->is_pci) { #endif + dev_priv->gart_info.table_mask = DMA_BIT_MASK(32); dev_priv->gart_info.gart_table_location = DRM_ATI_GART_MAIN; dev_priv->gart_info.table_size = R128_PCIGART_TABLE_SIZE; dev_priv->gart_info.addr = NULL; diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 833abc7..9072e4a 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1807,6 +1807,7 @@ static int radeon_do_init_cp(struct drm_device * dev, drm_radeon_init_t * init) } else #endif { + dev_priv->gart_info.table_mask = DMA_BIT_MASK(32); /* if we have an offset set from userspace */ if (dev_priv->pcigart_offset_set) { dev_priv->gart_info.bus_addr = diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c index 94baec6..7a339db 100644 --- a/drivers/char/drm/via_dma.c +++ b/drivers/char/drm/via_dma.c @@ -126,6 +126,8 @@ via_cmdbuf_wait(drm_via_private_t * dev_priv, unsigned int size) hw_addr, cur_addr, next_addr); return -1; } + if ((cur_addr < hw_addr) && (next_addr >= hw_addr)) + msleep(1); } while ((cur_addr < hw_addr) && (next_addr >= hw_addr)); return 0; } @@ -416,27 +418,50 @@ static int via_hook_segment(drm_via_private_t * dev_priv, int paused, count; volatile uint32_t *paused_at = dev_priv->last_pause_ptr; uint32_t reader,ptr; + uint32_t diff; paused = 0; via_flush_write_combine(); (void) *(volatile uint32_t *)(via_get_dma(dev_priv) -1); + *paused_at = pause_addr_lo; via_flush_write_combine(); (void) *paused_at; + reader = *(dev_priv->hw_addr_ptr); ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; + dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1; - if ((ptr - reader) <= dev_priv->dma_diff ) { - count = 10000000; - while (!(paused = (VIA_READ(0x41c) & 0x80000000)) && count--); + /* + * If there is a possibility that the command reader will + * miss the new pause address and pause on the old one, + * In that case we need to program the new start address + * using PCI. + */ + + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + count = 10000000; + while(diff == 0 && count--) { + paused = (VIA_READ(0x41c) & 0x80000000); + if (paused) + break; + reader = *(dev_priv->hw_addr_ptr); + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; } + paused = VIA_READ(0x41c) & 0x80000000; + if (paused && !no_pci_fire) { reader = *(dev_priv->hw_addr_ptr); - if ((ptr - reader) == dev_priv->dma_diff) { - + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + diff &= (dev_priv->dma_high - 1); + if (diff != 0 && diff < (dev_priv->dma_high >> 1)) { + DRM_ERROR("Paused at incorrect address. " + "0x%08x, 0x%08x 0x%08x\n", + ptr, reader, dev_priv->dma_diff); + } else if (diff == 0) { /* * There is a concern that these writes may stall the PCI bus * if the GPU is not idle. However, idling the GPU first @@ -577,6 +602,7 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) uint32_t pause_addr_lo, pause_addr_hi; uint32_t jump_addr_lo, jump_addr_hi; volatile uint32_t *last_pause_ptr; + uint32_t dma_low_save1, dma_low_save2; agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, @@ -603,8 +629,29 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) &pause_addr_lo, 0); *last_pause_ptr = pause_addr_lo; + dma_low_save1 = dev_priv->dma_low; - via_hook_segment( dev_priv, jump_addr_hi, jump_addr_lo, 0); + /* + * Now, set a trap that will pause the regulator if it tries to rerun the old + * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause + * and reissues the jump command over PCI, while the regulator has already taken the jump + * and actually paused at the current buffer end). + * There appears to be no other way to detect this condition, since the hw_addr_pointer + * does not seem to get updated immediately when a jump occurs. + */ + + last_pause_ptr = + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0) - 1; + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0); + *last_pause_ptr = pause_addr_lo; + + dma_low_save2 = dev_priv->dma_low; + dev_priv->dma_low = dma_low_save1; + via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); + dev_priv->dma_low = dma_low_save2; + via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); } diff --git a/drivers/char/drm/via_dmablit.c b/drivers/char/drm/via_dmablit.c index 33c5197..409e00a 100644 --- a/drivers/char/drm/via_dmablit.c +++ b/drivers/char/drm/via_dmablit.c @@ -603,7 +603,7 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli * (Not a big limitation anyway.) */ - if ((xfer->mem_stride - xfer->line_length) >= PAGE_SIZE) { + if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) { DRM_ERROR("Too large system memory stride. Stride: %d, " "Length: %d\n", xfer->mem_stride, xfer->line_length); return -EINVAL; diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index d73a768..f0b00ec 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -968,7 +968,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i size--; } - /* dump the report descriptor */ + /* dump the report */ dbg_hid("report %d (size %u) = ", n, size); for (i = 0; i < size; i++) dbg_hid_line(" %02x", data[i]); diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 5a38fb2..c3eb3f1 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -98,18 +98,16 @@ struct hidinput_key_translation { static struct hidinput_key_translation apple_fn_keys[] = { { KEY_BACKSPACE, KEY_DELETE }, - { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, - { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, - { KEY_F3, KEY_CYCLEWINDOWS, APPLE_FLAG_FKEY }, /* Exposé */ - { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */ - { KEY_F5, KEY_FN_F5 }, - { KEY_F6, KEY_FN_F6 }, - { KEY_F7, KEY_BACK, APPLE_FLAG_FKEY }, - { KEY_F8, KEY_PLAYPAUSE, APPLE_FLAG_FKEY }, - { KEY_F9, KEY_FORWARD, APPLE_FLAG_FKEY }, - { KEY_F10, KEY_MUTE, APPLE_FLAG_FKEY }, - { KEY_F11, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY }, - { KEY_F12, KEY_VOLUMEUP, APPLE_FLAG_FKEY }, + { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, + { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, + { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */ + { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */ + { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, + { KEY_F8, KEY_PLAYPAUSE, APPLE_FLAG_FKEY }, + { KEY_F9, KEY_NEXTSONG, APPLE_FLAG_FKEY }, + { KEY_F10, KEY_MUTE, APPLE_FLAG_FKEY }, + { KEY_F11, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY }, + { KEY_F12, KEY_VOLUMEUP, APPLE_FLAG_FKEY }, { KEY_UP, KEY_PAGEUP }, { KEY_DOWN, KEY_PAGEDOWN }, { KEY_LEFT, KEY_HOME }, diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index b38e559..d95979f 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -278,7 +278,7 @@ static int hid_submit_ctrl(struct hid_device *hid) usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0); maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0); if (maxpacket > 0) { - padlen = (len + maxpacket - 1) / maxpacket; + padlen = DIV_ROUND_UP(len, maxpacket); padlen *= maxpacket; if (padlen > usbhid->bufsize) padlen = usbhid->bufsize; diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index e6d05f6..e29a057 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -345,6 +345,9 @@ #define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400 #define USB_DEVICE_ID_N_S_HARMONY 0xc359 +#define USB_VENDOR_ID_NATSU 0x08b7 +#define USB_DEVICE_ID_NATSU_GAMEPAD 0x0001 + #define USB_VENDOR_ID_NEC 0x073e #define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301 @@ -426,6 +429,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_NATSU, USB_DEVICE_ID_NATSU_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD }, @@ -624,7 +628,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS, HID_QUIRK_APPLE_HAS_FN }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_HAS_FN }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD }, diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c index 4833b1a..5511ef0 100644 --- a/drivers/input/misc/cobalt_btns.c +++ b/drivers/input/misc/cobalt_btns.c @@ -1,7 +1,7 @@ /* * Cobalt button interface driver. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/init.h> #include <linux/input-polldev.h> @@ -55,7 +55,7 @@ static void handle_buttons(struct input_polled_dev *dev) status = ~readl(bdev->reg) >> 24; for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) { - if (status & (1UL << i)) { + if (status & (1U << i)) { if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) { input_event(input, EV_MSC, MSC_SCAN, i); input_report_key(input, bdev->keymap[i], 1); @@ -97,16 +97,16 @@ static int __devinit cobalt_buttons_probe(struct platform_device *pdev) input->name = "Cobalt buttons"; input->phys = "cobalt/input0"; input->id.bustype = BUS_HOST; - input->cdev.dev = &pdev->dev; + input->dev.parent = &pdev->dev; - input->keycode = pdev->keymap; - input->keycodemax = ARRAY_SIZE(pdev->keymap); + input->keycode = bdev->keymap; + input->keycodemax = ARRAY_SIZE(bdev->keymap); input->keycodesize = sizeof(unsigned short); input_set_capability(input, EV_MSC, MSC_SCAN); __set_bit(EV_KEY, input->evbit); - for (i = 0; i < ARRAY_SIZE(buttons_map); i++) - __set_bit(input->keycode[i], input->keybit); + for (i = 0; i < ARRAY_SIZE(cobalt_map); i++) + __set_bit(bdev->keymap[i], input->keybit); __clear_bit(KEY_RESERVED, input->keybit); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index b346a3b..385e32b 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -116,8 +116,8 @@ static void alps_process_packet(struct psmouse *psmouse) } if (priv->i->flags & ALPS_FW_BK_1) { - back = packet[2] & 4; - forward = packet[0] & 0x10; + back = packet[0] & 0x10; + forward = packet[2] & 4; } if (priv->i->flags & ALPS_FW_BK_2) { @@ -483,6 +483,7 @@ int alps_init(struct psmouse *psmouse) dev2->id.vendor = 0x0002; dev2->id.product = PSMOUSE_ALPS; dev2->id.version = 0x0000; + dev2->dev.parent = &psmouse->ps2dev.serio->dev; dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); dev2->relbit[BIT_WORD(REL_X)] |= BIT_MASK(REL_X) | BIT_MASK(REL_Y); diff --git a/drivers/input/serio/i8042-snirm.h b/drivers/input/serio/i8042-snirm.h new file mode 100644 index 0000000..409a934 --- /dev/null +++ b/drivers/input/serio/i8042-snirm.h @@ -0,0 +1,75 @@ +#ifndef _I8042_SNIRM_H +#define _I8042_SNIRM_H + +#include <asm/sni.h> + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * Names. + */ + +#define I8042_KBD_PHYS_DESC "onboard/serio0" +#define I8042_AUX_PHYS_DESC "onboard/serio1" +#define I8042_MUX_PHYS_DESC "onboard/serio%d" + +/* + * IRQs. + */ +static int i8042_kbd_irq; +static int i8042_aux_irq; +#define I8042_KBD_IRQ i8042_kbd_irq +#define I8042_AUX_IRQ i8042_aux_irq + +static void __iomem *kbd_iobase; + +#define I8042_COMMAND_REG (kbd_iobase + 0x64UL) +#define I8042_DATA_REG (kbd_iobase + 0x60UL) + +static inline int i8042_read_data(void) +{ + return readb(kbd_iobase + 0x60UL); +} + +static inline int i8042_read_status(void) +{ + return readb(kbd_iobase + 0x64UL); +} + +static inline void i8042_write_data(int val) +{ + writeb(val, kbd_iobase + 0x60UL); +} + +static inline void i8042_write_command(int val) +{ + writeb(val, kbd_iobase + 0x64UL); +} +static inline int i8042_platform_init(void) +{ + /* RM200 is strange ... */ + if (sni_brd_type == SNI_BRD_RM200) { + kbd_iobase = ioremap(0x16000000, 4); + i8042_kbd_irq = 33; + i8042_aux_irq = 44; + } else { + kbd_iobase = ioremap(0x14000000, 4); + i8042_kbd_irq = 1; + i8042_aux_irq = 12; + } + if (!kbd_iobase) + return -ENOMEM; + + return 0; +} + +static inline void i8042_platform_exit(void) +{ + +} + +#endif /* _I8042_SNIRM_H */ diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 662e844..60931ac 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -277,6 +277,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"), }, }, + { + .ident = "Lenovo 3000 n100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"), + }, + }, { } }; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 2763394..65a74cf 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1151,7 +1151,6 @@ static int __devinit i8042_setup_kbd(void) static int __devinit i8042_probe(struct platform_device *dev) { int error; - char param; error = i8042_controller_selftest(); if (error) @@ -1174,7 +1173,7 @@ static int __devinit i8042_probe(struct platform_device *dev) } #ifdef CONFIG_X86 if (i8042_dritek) { - param = 0x90; + char param = 0x90; error = i8042_command(¶m, 0x1059); if (error) goto out_fail; diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h index c972e5d..cbc1beb 100644 --- a/drivers/input/serio/i8042.h +++ b/drivers/input/serio/i8042.h @@ -18,6 +18,8 @@ #include "i8042-jazzio.h" #elif defined(CONFIG_SGI_HAS_I8042) #include "i8042-ip22io.h" +#elif defined(CONFIG_SNI_RM) +#include "i8042-snirm.h" #elif defined(CONFIG_PPC) #include "i8042-ppcio.h" #elif defined(CONFIG_SPARC) diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 6542edb..acf9830 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger <egger@suse.de> * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> - * Copyright (c) 2002-2007 Ping Cheng <pingc@wacom.com> + * Copyright (c) 2002-2008 Ping Cheng <pingc@wacom.com> * * ChangeLog: * v0.1 (vp) - Initial release @@ -65,6 +65,7 @@ * - and wacom_wac.c deals with Wacom specific code * - Support Intuos3 4x6 * v1.47 (pc) - Added support for Bamboo + * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX */ /* @@ -85,7 +86,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.47" +#define DRIVER_VERSION "v1.48" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -125,6 +126,7 @@ extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern __u16 wacom_le16_to_cpu(unsigned char *data); extern __u16 wacom_be16_to_cpu(unsigned char *data); extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index d64b1ea1..41caaef 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -171,6 +171,7 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3); input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); } void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -180,6 +181,11 @@ void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); } +void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); +} + void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index fc03ba2..ffe3384 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -163,7 +163,9 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) } id = STYLUS_DEVICE_ID; - if (data[1] & 0x80) { /* in prox */ + if ((data[1] & 0x80) && ((data[1] & 0x07) || data[2] || data[3] || data[4] + || data[5] || data[6] || (data[7] & 0x07))) { + /* in prox and not a pad data */ switch ((data[1] >> 5) & 3) { @@ -233,7 +235,6 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) if (data[7] & 0xf8) { wacom_input_sync(wcombo); /* sync last event */ wacom->id[1] = 1; - wacom->serial[1] = (data[7] & 0xf8); wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); @@ -252,10 +253,9 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) } break; case WACOM_MO: - if ((data[7] & 0xf8) || (data[8] & 0x80)) { + if ((data[7] & 0xf8) || (data[8] & 0xff)) { wacom_input_sync(wcombo); /* sync last event */ wacom->id[1] = 1; - wacom->serial[1] = (data[7] & 0xf8); wacom_report_key(wcombo, BTN_0, (data[7] & 0x08)); wacom_report_key(wcombo, BTN_1, (data[7] & 0x20)); wacom_report_key(wcombo, BTN_4, (data[7] & 0x10)); @@ -434,10 +434,12 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_5, (data[6] & 0x02)); wacom_report_key(wcombo, BTN_6, (data[6] & 0x04)); wacom_report_key(wcombo, BTN_7, (data[6] & 0x08)); + wacom_report_key(wcombo, BTN_8, (data[5] & 0x10)); + wacom_report_key(wcombo, BTN_9, (data[6] & 0x10)); wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); - if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | + if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) | data[2] | (data[3] & 0x1f) | data[4]) wacom_report_key(wcombo, wacom->tool[1], 1); else @@ -481,13 +483,11 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) if (data[1] & 0x02) { /* Rotation packet */ if (wacom->features->type >= INTUOS3S) { - /* I3 marker pen rotation reported as wheel - * due to valuator limitation - */ + /* I3 marker pen rotation */ t = (data[6] << 3) | ((data[7] >> 5) & 7); t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : ((t-1) / 2 + 450)) : (450 - t / 2) ; - wacom_report_abs(wcombo, ABS_WHEEL, t); + wacom_report_abs(wcombo, ABS_Z, t); } else { /* 4D mouse rotation packet */ t = (data[6] << 3) | ((data[7] >> 5) & 7); @@ -558,6 +558,7 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) case INTUOS3: case INTUOS3L: case CINTIQ: + case WACOM_BEE: return (wacom_intuos_irq(wacom_wac, wcombo)); break; default: @@ -577,6 +578,8 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w case GRAPHIRE: input_dev_g(input_dev, wacom_wac); break; + case WACOM_BEE: + input_dev_bee(input_dev, wacom_wac); case INTUOS3: case INTUOS3L: case CINTIQ: @@ -607,12 +610,15 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE }, { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 }, { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, + { "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO }, + { "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO }, { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE }, - { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE }, + { "Wacom PenPartner2", 8, 3250, 2320, 511, 63, GRAPHIRE }, { "Wacom Bamboo", 9, 14760, 9225, 511, 63, WACOM_MO }, + { "Wacom Bamboo1", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, @@ -643,6 +649,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 }, { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S }, { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, + { "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { } }; @@ -656,12 +663,15 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x65) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x69) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, @@ -692,6 +702,7 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } }; diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index a302e22..3342bc0 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -25,6 +25,7 @@ enum { INTUOS3, INTUOS3L, CINTIQ, + WACOM_BEE, WACOM_MO, MAX_TYPE }; diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 58934a4..57a1c28 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -213,7 +213,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) struct ads7846 *ts = dev_get_drvdata(dev); struct ser_req *req = kzalloc(sizeof *req, GFP_KERNEL); int status; - int sample; + int uninitialized_var(sample); int use_internal; if (!req) diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 7f4836b8..5fa4ba0 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -467,7 +467,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */ - if (value) { + if (value && pciehp_force) { rc = pciehp_enable_slot(t_slot); if (rc) /* -ENODEV: shouldn't happen, but deal with it */ value = 0; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 3ab313e..17e71d5 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -4,8 +4,6 @@ menuconfig THERMAL bool "Generic Thermal sysfs driver" - select HWMON - default y help Generic Thermal Sysfs driver offers a generic mechanism for thermal management. Usually it's made up of one or more thermal diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c index 41bd4c8..8b86e53 100644 --- a/drivers/thermal/thermal.c +++ b/drivers/thermal/thermal.c @@ -30,10 +30,8 @@ #include <linux/idr.h> #include <linux/thermal.h> #include <linux/spinlock.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -MODULE_AUTHOR("Zhang Rui"); +MODULE_AUTHOR("Zhang Rui") MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); @@ -58,9 +56,6 @@ static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); static DEFINE_MUTEX(thermal_list_lock); -static struct device *thermal_hwmon; -#define MAX_THERMAL_ZONES 10 - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; @@ -92,67 +87,7 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id) mutex_unlock(lock); } -/* hwmon sys I/F*/ -static ssize_t -name_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "thermal_sys_class\n"); -} - -static ssize_t -temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct thermal_zone_device *tz; - struct sensor_device_attribute *sensor_attr - = to_sensor_dev_attr(attr); - - list_for_each_entry(tz, &thermal_tz_list, node) - if (tz->id == sensor_attr->index) - return tz->ops->get_temp(tz, buf); - - return -ENODEV; -} - -static ssize_t -temp_crit_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_zone_device *tz; - struct sensor_device_attribute *sensor_attr - = to_sensor_dev_attr(attr); - - list_for_each_entry(tz, &thermal_tz_list, node) - if (tz->id == sensor_attr->index) - return tz->ops->get_trip_temp(tz, 0, buf); - - return -ENODEV; -} - -static DEVICE_ATTR(name, 0444, name_show, NULL); -static struct sensor_device_attribute sensor_attrs[] = { - SENSOR_ATTR(temp1_input, 0444, temp_input_show, NULL, 0), - SENSOR_ATTR(temp1_crit, 0444, temp_crit_show, NULL, 0), - SENSOR_ATTR(temp2_input, 0444, temp_input_show, NULL, 1), - SENSOR_ATTR(temp2_crit, 0444, temp_crit_show, NULL, 1), - SENSOR_ATTR(temp3_input, 0444, temp_input_show, NULL, 2), - SENSOR_ATTR(temp3_crit, 0444, temp_crit_show, NULL, 2), - SENSOR_ATTR(temp4_input, 0444, temp_input_show, NULL, 3), - SENSOR_ATTR(temp4_crit, 0444, temp_crit_show, NULL, 3), - SENSOR_ATTR(temp5_input, 0444, temp_input_show, NULL, 4), - SENSOR_ATTR(temp5_crit, 0444, temp_crit_show, NULL, 4), - SENSOR_ATTR(temp6_input, 0444, temp_input_show, NULL, 5), - SENSOR_ATTR(temp6_crit, 0444, temp_crit_show, NULL, 5), - SENSOR_ATTR(temp7_input, 0444, temp_input_show, NULL, 6), - SENSOR_ATTR(temp7_crit, 0444, temp_crit_show, NULL, 6), - SENSOR_ATTR(temp8_input, 0444, temp_input_show, NULL, 7), - SENSOR_ATTR(temp8_crit, 0444, temp_crit_show, NULL, 7), - SENSOR_ATTR(temp9_input, 0444, temp_input_show, NULL, 8), - SENSOR_ATTR(temp9_crit, 0444, temp_crit_show, NULL, 8), - SENSOR_ATTR(temp10_input, 0444, temp_input_show, NULL, 9), - SENSOR_ATTR(temp10_crit, 0444, temp_crit_show, NULL, 9), -}; - -/* thermal zone sys I/F */ +/* sys I/F for thermal zone */ #define to_thermal_zone(_dev) \ container_of(_dev, struct thermal_zone_device, device) @@ -279,7 +214,7 @@ do { \ device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ } while (0) -/* cooling device sys I/F */ +/* sys I/F for cooling device */ #define to_cooling_device(_dev) \ container_of(_dev, struct thermal_cooling_device, device) @@ -512,9 +447,6 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, struct thermal_zone_device *pos; int result; - if (!type) - return ERR_PTR(-EINVAL); - if (strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -545,9 +477,11 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, } /* sys I/F */ - result = device_create_file(&cdev->device, &dev_attr_cdev_type); - if (result) - goto unregister; + if (type) { + result = device_create_file(&cdev->device, &dev_attr_cdev_type); + if (result) + goto unregister; + } result = device_create_file(&cdev->device, &dev_attr_max_state); if (result) @@ -613,8 +547,8 @@ void thermal_cooling_device_unregister(struct tz->ops->unbind(tz, cdev); } mutex_unlock(&thermal_list_lock); - - device_remove_file(&cdev->device, &dev_attr_cdev_type); + if (cdev->type[0]) + device_remove_file(&cdev->device, &dev_attr_cdev_type); device_remove_file(&cdev->device, &dev_attr_max_state); device_remove_file(&cdev->device, &dev_attr_cur_state); @@ -646,9 +580,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, int result; int count; - if (!type) - return ERR_PTR(-EINVAL); - if (strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -670,13 +601,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, kfree(tz); return ERR_PTR(result); } - if (tz->id >= MAX_THERMAL_ZONES) { - printk(KERN_ERR PREFIX - "Too many thermal zones\n"); - release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); - kfree(tz); - return ERR_PTR(-EINVAL); - } strcpy(tz->type, type); tz->ops = ops; @@ -691,27 +615,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, return ERR_PTR(result); } - /* hwmon sys I/F */ - result = device_create_file(thermal_hwmon, - &sensor_attrs[tz->id * 2].dev_attr); - if (result) - goto unregister; - - if (trips > 0) { - char buf[40]; - result = tz->ops->get_trip_type(tz, 0, buf); - if (result > 0 && !strcmp(buf, "critical\n")) { - result = device_create_file(thermal_hwmon, - &sensor_attrs[tz->id * 2 + 1].dev_attr); - if (result) - goto unregister; - } - } - /* sys I/F */ - result = device_create_file(&tz->device, &dev_attr_type); - if (result) - goto unregister; + if (type) { + result = device_create_file(&tz->device, &dev_attr_type); + if (result) + goto unregister; + } result = device_create_file(&tz->device, &dev_attr_temp); if (result) @@ -778,17 +687,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) tz->ops->unbind(tz, cdev); mutex_unlock(&thermal_list_lock); - device_remove_file(thermal_hwmon, - &sensor_attrs[tz->id * 2].dev_attr); - if (tz->trips > 0) { - char buf[40]; - if (tz->ops->get_trip_type(tz, 0, buf) > 0) - if (!strcmp(buf, "critical\n")) - device_remove_file(thermal_hwmon, - &sensor_attrs[tz->id * 2 + 1].dev_attr); - } - - device_remove_file(&tz->device, &dev_attr_type); + if (tz->type[0]) + device_remove_file(&tz->device, &dev_attr_type); device_remove_file(&tz->device, &dev_attr_temp); if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); @@ -805,19 +705,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) EXPORT_SYMBOL(thermal_zone_device_unregister); -static void thermal_exit(void) -{ - if (thermal_hwmon) { - device_remove_file(thermal_hwmon, &dev_attr_name); - hwmon_device_unregister(thermal_hwmon); - } - class_unregister(&thermal_class); - idr_destroy(&thermal_tz_idr); - idr_destroy(&thermal_cdev_idr); - mutex_destroy(&thermal_idr_lock); - mutex_destroy(&thermal_list_lock); -} - static int __init thermal_init(void) { int result = 0; @@ -829,21 +716,17 @@ static int __init thermal_init(void) mutex_destroy(&thermal_idr_lock); mutex_destroy(&thermal_list_lock); } - - thermal_hwmon = hwmon_device_register(NULL); - if (IS_ERR(thermal_hwmon)) { - result = PTR_ERR(thermal_hwmon); - thermal_hwmon = NULL; - printk(KERN_ERR PREFIX - "unable to register hwmon device\n"); - thermal_exit(); - return result; - } - - result = device_create_file(thermal_hwmon, &dev_attr_name); - return result; } +static void __exit thermal_exit(void) +{ + class_unregister(&thermal_class); + idr_destroy(&thermal_tz_idr); + idr_destroy(&thermal_cdev_idr); + mutex_destroy(&thermal_idr_lock); + mutex_destroy(&thermal_list_lock); +} + subsys_initcall(thermal_init); module_exit(thermal_exit); @@ -1194,6 +1194,8 @@ EXPORT_SYMBOL(bio_hw_segments); EXPORT_SYMBOL(bio_add_page); EXPORT_SYMBOL(bio_add_pc_page); EXPORT_SYMBOL(bio_get_nr_vecs); +EXPORT_SYMBOL(bio_map_user); +EXPORT_SYMBOL(bio_unmap_user); EXPORT_SYMBOL(bio_map_kern); EXPORT_SYMBOL(bio_pair_release); EXPORT_SYMBOL(bio_split); diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 0fac822..4108b38 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -127,7 +127,6 @@ header-y += pkt_sched.h header-y += posix_types.h header-y += ppdev.h header-y += prctl.h -header-y += ps2esdi.h header-y += qnxtypes.h header-y += quotaio_v1.h header-y += quotaio_v2.h diff --git a/include/linux/ps2esdi.h b/include/linux/ps2esdi.h deleted file mode 100644 index c0e050b..0000000 --- a/include/linux/ps2esdi.h +++ /dev/null @@ -1,98 +0,0 @@ -#ifndef _PS2ESDI_H_ -#define _PS2ESDI_H_ - -#define NRML_ESDI_ID 0xddff -#define INTG_ESDI_ID 0xdf9f - -#define PRIMARY_IO_BASE 0x3510 -#define ALT_IO_BASE 0x3518 - -#define ESDI_CMD_INT (io_base+0) -#define ESDI_STT_INT (io_base+0) -#define ESDI_CONTROL (io_base+2) -#define ESDI_STATUS (io_base+2) -#define ESDI_ATTN (io_base+3) -#define ESDI_INTRPT (io_base+3) - -#define STATUS_ENABLED 0x01 -#define STATUS_ALTERNATE 0x02 -#define STATUS_BUSY 0x10 -#define STATUS_STAT_AVAIL 0x08 -#define STATUS_INTR 0x01 -#define STATUS_RESET_FAIL 0xea -#define STATUS_CMD_INF 0x04 - -#define CTRL_SOFT_RESET 0xe4 -#define CTRL_HARD_RESET 0x80 -#define CTRL_EOI 0xe2 -#define CTRL_ENABLE_DMA 0x02 -#define CTRL_ENABLE_INTR 0x01 -#define CTRL_DISABLE_INTR 0x00 - -#define ATT_EOI 0x02 - -/* bits of word 0 of configuration status block. more info see p.38 of tech ref */ -#define CONFIG_IS 0x10 /* Invalid Secondary */ -#define CONFIG_ZD 0x08 /* Zero Defect */ -#define CONFIG_SF 0x04 /* Skewed Format */ -#define CONFIG_FR 0x02 /* Removable */ -#define CONFIG_RT 0x01 /* Retries */ - -#define PORT_SYS_A 0x92 -#define PORT_DMA_FN 0x18 -#define PORT_DMA_EX 0x1a - -#define ON (unsigned char)0x40 -#define OFF (unsigned char)~ON -#define LITE_ON outb(inb(PORT_SYS_A) | ON,PORT_SYS_A) -#define LITE_OFF outb((inb(PORT_SYS_A) & OFF),PORT_SYS_A) - -#define FAIL 0 -#define SUCCES 1 - -#define INT_CMD_COMPLETE 0x01 -#define INT_CMD_ECC 0x03 -#define INT_CMD_RETRY 0x05 -#define INT_CMD_FORMAT 0x06 -#define INT_CMD_ECC_RETRY 0x07 -#define INT_CMD_WARNING 0x08 -#define INT_CMD_ABORT 0x09 -#define INT_RESET 0x0A -#define INT_TRANSFER_REQ 0x0B -#define INT_CMD_FAILED 0x0C -#define INT_DMA_ERR 0x0D -#define INT_CMD_BLK_ERR 0x0E -#define INT_ATTN_ERROR 0x0F - -#define DMA_MASK_CHAN 0x90 -#define DMA_UNMASK_CHAN 0xA0 -#define DMA_WRITE_ADDR 0x20 -#define DMA_WRITE_TC 0x40 -#define DMA_WRITE_MODE 0x70 - -#define CMD_GET_DEV_CONFIG 0x09 -#define CMD_READ 0x4601 -#define CMD_WRITE 0x4602 -#define DMA_READ_16 0x4C -#define DMA_WRITE_16 0x44 - - -#define MB 1024*1024 -#define SECT_SIZE 512 - -#define ERROR 1 -#define OK 0 - -#define HDIO_GETGEO 0x0301 - -#define FALSE 0 -#define TRUE !FALSE - -struct ps2esdi_geometry { - unsigned char heads; - unsigned char sectors; - unsigned short cylinders; - unsigned long start; -}; - -#endif /* _PS2ESDI_H_ */ diff --git a/kernel/relay.c b/kernel/relay.c index d080b9d..4c035a8 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -1066,7 +1066,7 @@ static int subbuf_splice_actor(struct file *in, unsigned int flags, int *nonpad_ret) { - unsigned int pidx, poff, total_len, subbuf_pages, ret; + unsigned int pidx, poff, total_len, subbuf_pages, nr_pages, ret; struct rchan_buf *rbuf = in->private_data; unsigned int subbuf_size = rbuf->chan->subbuf_size; uint64_t pos = (uint64_t) *ppos; @@ -1097,8 +1097,9 @@ static int subbuf_splice_actor(struct file *in, subbuf_pages = rbuf->chan->alloc_size >> PAGE_SHIFT; pidx = (read_start / PAGE_SIZE) % subbuf_pages; poff = read_start & ~PAGE_MASK; + nr_pages = min_t(unsigned int, subbuf_pages, PIPE_BUFFERS); - for (total_len = 0; spd.nr_pages < subbuf_pages; spd.nr_pages++) { + for (total_len = 0; spd.nr_pages < nr_pages; spd.nr_pages++) { unsigned int this_len, this_end, private; unsigned int cur_pos = read_start + total_len; diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 4bf4807..41a049f 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -800,7 +800,8 @@ static void selinux_sb_clone_mnt_opts(const struct super_block *oldsb, mutex_unlock(&newsbsec->lock); } -int selinux_parse_opts_str(char *options, struct security_mnt_opts *opts) +static int selinux_parse_opts_str(char *options, + struct security_mnt_opts *opts) { char *p; char *context = NULL, *defcontext = NULL; |