diff options
38 files changed, 538 insertions, 325 deletions
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index d2303d0..d4f0c98 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -2517,7 +2517,7 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev) dev_err(di->dev, "%s mask and set failed\n", __func__); usb_unregister_notifier(di->usb_phy, &di->nb); - usb_put_transceiver(di->usb_phy); + usb_put_phy(di->usb_phy); /* Delete the work queue */ destroy_workqueue(di->charger_wq); @@ -2688,8 +2688,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) goto free_ac; } - di->usb_phy = usb_get_transceiver(); - if (!di->usb_phy) { + di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(di->usb_phy)) { dev_err(di->dev, "failed to get usb transceiver\n"); ret = -EINVAL; goto free_usb; @@ -2747,7 +2747,7 @@ free_irq: free_irq(irq, di); } put_usb_phy: - usb_put_transceiver(di->usb_phy); + usb_put_phy(di->usb_phy); free_usb: power_supply_unregister(&di->usb_chg.psy); free_ac: diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index e5ccd29..1229119 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -415,8 +415,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev) if (!isp) return -ENOMEM; - isp->phy = usb_get_transceiver(); - if (!isp->phy) + isp->phy = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(isp->phy)) goto fail0; isp->dev = &pdev->dev; @@ -475,7 +475,7 @@ fail2: power_supply_unregister(&isp->psy); fail1: isp1704_charger_set_power(isp, 0); - usb_put_transceiver(isp->phy); + usb_put_phy(isp->phy); fail0: kfree(isp); @@ -490,7 +490,7 @@ static int __devexit isp1704_charger_remove(struct platform_device *pdev) usb_unregister_notifier(isp->phy, &isp->nb); power_supply_unregister(&isp->psy); - usb_put_transceiver(isp->phy); + usb_put_phy(isp->phy); isp1704_charger_set_power(isp, 0); kfree(isp); diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index 214468f..8dbcd53 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -321,12 +321,12 @@ static int pda_power_probe(struct platform_device *pdev) } #ifdef CONFIG_USB_OTG_UTILS - transceiver = usb_get_transceiver(); - if (transceiver && !pdata->is_usb_online) { - pdata->is_usb_online = otg_is_usb_online; - } - if (transceiver && !pdata->is_ac_online) { - pdata->is_ac_online = otg_is_ac_online; + transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(transceiver)) { + if (!pdata->is_usb_online) + pdata->is_usb_online = otg_is_usb_online; + if (!pdata->is_ac_online) + pdata->is_ac_online = otg_is_ac_online; } #endif @@ -373,7 +373,7 @@ static int pda_power_probe(struct platform_device *pdev) } #ifdef CONFIG_USB_OTG_UTILS - if (transceiver && pdata->use_otg_notifier) { + if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier) { otg_nb.notifier_call = otg_handle_notification; ret = usb_register_notifier(transceiver, &otg_nb); if (ret) { @@ -408,8 +408,8 @@ usb_supply_failed: if (pdata->is_ac_online && ac_irq) free_irq(ac_irq->start, &pda_psy_ac); #ifdef CONFIG_USB_OTG_UTILS - if (transceiver) - usb_put_transceiver(transceiver); + if (!IS_ERR_OR_NULL(transceiver)) + usb_put_phy(transceiver); #endif ac_irq_failed: if (pdata->is_ac_online) @@ -443,8 +443,8 @@ static int pda_power_remove(struct platform_device *pdev) if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); #ifdef CONFIG_USB_OTG_UTILS - if (transceiver) - usb_put_transceiver(transceiver); + if (!IS_ERR_OR_NULL(transceiver)) + usb_put_phy(transceiver); #endif if (ac_draw) { regulator_put(ac_draw); diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c index fdad850..7cacbaa 100644 --- a/drivers/power/twl4030_charger.c +++ b/drivers/power/twl4030_charger.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/slab.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/i2c/twl.h> @@ -479,8 +480,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev) INIT_WORK(&bci->work, twl4030_bci_usb_work); - bci->transceiver = usb_get_transceiver(); - if (bci->transceiver != NULL) { + bci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(bci->transceiver)) { bci->usb_nb.notifier_call = twl4030_bci_usb_ncb; usb_register_notifier(bci->transceiver, &bci->usb_nb); } @@ -507,9 +508,9 @@ static int __init twl4030_bci_probe(struct platform_device *pdev) return 0; fail_unmask_interrupts: - if (bci->transceiver != NULL) { + if (!IS_ERR_OR_NULL(bci->transceiver)) { usb_unregister_notifier(bci->transceiver, &bci->usb_nb); - usb_put_transceiver(bci->transceiver); + usb_put_phy(bci->transceiver); } free_irq(bci->irq_bci, bci); fail_bci_irq: @@ -538,9 +539,9 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev) twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, TWL4030_INTERRUPTS_BCIIMR2A); - if (bci->transceiver != NULL) { + if (!IS_ERR_OR_NULL(bci->transceiver)) { usb_unregister_notifier(bci->transceiver, &bci->usb_nb); - usb_put_transceiver(bci->transceiver); + usb_put_phy(bci->transceiver); } free_irq(bci->irq_bci, bci); free_irq(bci->irq_chg, bci); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 51f9694..4688ab7 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -14,6 +14,7 @@ #include <linux/device.h> #include <linux/dmapool.h> #include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/module.h> @@ -1687,7 +1688,7 @@ static int udc_start(struct ci13xxx *udc) udc->gadget.ep0 = &udc->ep0in->ep; - udc->transceiver = usb_get_transceiver(); + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (udc->transceiver == NULL) { @@ -1712,7 +1713,7 @@ static int udc_start(struct ci13xxx *udc) if (retval) goto unreg_device; - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { retval = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (retval) @@ -1729,9 +1730,9 @@ static int udc_start(struct ci13xxx *udc) return retval; remove_trans: - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { otg_set_peripheral(udc->transceiver->otg, &udc->gadget); - usb_put_transceiver(udc->transceiver); + usb_put_phy(udc->transceiver); } dev_err(dev, "error = %i\n", retval); @@ -1740,8 +1741,8 @@ remove_dbg: unreg_device: device_unregister(&udc->gadget.dev); put_transceiver: - if (udc->transceiver) - usb_put_transceiver(udc->transceiver); + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_put_phy(udc->transceiver); free_pools: dma_pool_destroy(udc->td_pool); free_qh_pool: @@ -1772,9 +1773,9 @@ static void udc_stop(struct ci13xxx *udc) dma_pool_destroy(udc->td_pool); dma_pool_destroy(udc->qh_pool); - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { otg_set_peripheral(udc->transceiver->otg, NULL); - usb_put_transceiver(udc->transceiver); + usb_put_phy(udc->transceiver); } dbg_remove_files(&udc->gadget.dev); device_unregister(&udc->gadget.dev); diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index a65ca0f..3def828 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -24,6 +24,7 @@ #include <linux/ioport.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/list.h> @@ -1229,7 +1230,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) struct fsl_udc *udc; udc = container_of(gadget, struct fsl_udc, gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -ENOTSUPP; } @@ -1983,13 +1984,13 @@ static int fsl_start(struct usb_gadget_driver *driver, goto out; } - if (udc_controller->transceiver) { + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { /* Suspend the controller until OTG enable it */ udc_controller->stopped = 1; printk(KERN_INFO "Suspend udc for OTG auto detect\n"); /* connect to bus through transceiver */ - if (udc_controller->transceiver) { + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { retval = otg_set_peripheral( udc_controller->transceiver->otg, &udc_controller->gadget); @@ -2030,7 +2031,7 @@ static int fsl_stop(struct usb_gadget_driver *driver) if (!driver || driver != udc_controller->driver || !driver->unbind) return -EINVAL; - if (udc_controller->transceiver) + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) otg_set_peripheral(udc_controller->transceiver->otg, NULL); /* stop DR, disable intr */ @@ -2455,8 +2456,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG if (pdata->operating_mode == FSL_USB2_DR_OTG) { - udc_controller->transceiver = usb_get_transceiver(); - if (!udc_controller->transceiver) { + udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(udc_controller->transceiver)) { ERR("Can't find OTG driver!\n"); ret = -ENODEV; goto err_kfree; @@ -2540,7 +2541,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) goto err_free_irq; } - if (!udc_controller->transceiver) { + if (IS_ERR_OR_NULL(udc_controller->transceiver)) { /* initialize usb hw reg except for regs for EP, * leave usbintr reg untouched */ dr_controller_setup(udc_controller); @@ -2565,7 +2566,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) if (ret < 0) goto err_free_irq; - if (udc_controller->transceiver) + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) udc_controller->gadget.is_otg = 1; /* setup QH and epctrl for ep0 */ diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 117a4bb..75db2c3 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -19,6 +19,7 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/init.h> #include <linux/timer.h> #include <linux/list.h> @@ -1381,7 +1382,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver, return retval; } - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { retval = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (retval) { @@ -2107,7 +2108,7 @@ static int __devexit mv_udc_remove(struct platform_device *dev) * then vbus irq will not be requested in udc driver. */ if (udc->pdata && udc->pdata->vbus - && udc->clock_gating && udc->transceiver == NULL) + && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver)) free_irq(udc->pdata->vbus->irq, &dev->dev); /* free memory allocated in probe */ @@ -2180,7 +2181,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) #ifdef CONFIG_USB_OTG_UTILS if (pdata->mode == MV_USB_MODE_OTG) - udc->transceiver = usb_get_transceiver(); + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); #endif udc->clknum = pdata->clknum; @@ -2325,7 +2326,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) eps_init(udc); /* VBUS detect: we can disable/enable clock on demand.*/ - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) udc->clock_gating = 1; else if (pdata->vbus) { udc->clock_gating = 1; @@ -2369,7 +2370,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) err_unregister: if (udc->pdata && udc->pdata->vbus - && udc->clock_gating && udc->transceiver == NULL) + && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver)) free_irq(pdata->vbus->irq, &dev->dev); device_unregister(&udc->gadget.dev); err_free_irq: @@ -2404,7 +2405,7 @@ static int mv_udc_suspend(struct device *_dev) struct mv_udc *udc = the_controller; /* if OTG is enabled, the following will be done in OTG driver*/ - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return 0; if (udc->pdata->vbus && udc->pdata->vbus->poll) @@ -2437,7 +2438,7 @@ static int mv_udc_resume(struct device *_dev) int retval; /* if OTG is enabled, the following will be done in OTG driver*/ - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return 0; if (!udc->clock_gating) { diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b26c7d68..d7df89e 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -35,6 +35,7 @@ #include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/prefetch.h> #include <linux/io.h> @@ -1152,7 +1153,7 @@ static int omap_wakeup(struct usb_gadget *gadget) /* NOTE: non-OTG systems may use SRP TOO... */ } else if (!(udc->devstat & UDC_ATT)) { - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) retval = otg_start_srp(udc->transceiver->otg); } spin_unlock_irqrestore(&udc->lock, flags); @@ -1284,7 +1285,7 @@ static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA) struct omap_udc *udc; udc = container_of(gadget, struct omap_udc, gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -EOPNOTSUPP; } @@ -1734,12 +1735,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src) if (devstat & UDC_ATT) { udc->gadget.speed = USB_SPEED_FULL; VDBG("connect\n"); - if (!udc->transceiver) + if (IS_ERR_OR_NULL(udc->transceiver)) pullup_enable(udc); /* if (driver->connect) call it */ } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) { udc->gadget.speed = USB_SPEED_UNKNOWN; - if (!udc->transceiver) + if (IS_ERR_OR_NULL(udc->transceiver)) pullup_disable(udc); DBG("disconnect, gadget %s\n", udc->driver->driver.name); @@ -1779,12 +1780,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src) udc->driver->suspend(&udc->gadget); spin_lock(&udc->lock); } - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) usb_phy_set_suspend( udc->transceiver, 1); } else { VDBG("resume\n"); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) usb_phy_set_suspend( udc->transceiver, 0); if (udc->gadget.speed == USB_SPEED_FULL @@ -2092,7 +2093,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver, omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC); /* connect to bus through transceiver */ - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { status = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (status < 0) { @@ -2139,7 +2140,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver) if (machine_without_vbus_sense()) omap_vbus_session(&udc->gadget, 0); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) (void) otg_set_peripheral(udc->transceiver->otg, NULL); else pullup_disable(udc); @@ -2829,8 +2830,8 @@ static int __devinit omap_udc_probe(struct platform_device *pdev) * use it. Except for OTG, we don't _need_ to talk to one; * but not having one probably means no VBUS detection. */ - xceiv = usb_get_transceiver(); - if (xceiv) + xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(xceiv)) type = xceiv->label; else if (config->otg) { DBG("OTG requires external transceiver!\n"); @@ -2854,7 +2855,7 @@ static int __devinit omap_udc_probe(struct platform_device *pdev) case 16: case 19: case 25: - if (!xceiv) { + if (IS_ERR_OR_NULL(xceiv)) { DBG("external transceiver not registered!\n"); type = "unknown"; } @@ -2956,8 +2957,8 @@ cleanup1: udc = NULL; cleanup0: - if (xceiv) - usb_put_transceiver(xceiv); + if (!IS_ERR_OR_NULL(xceiv)) + usb_put_phy(xceiv); if (cpu_is_omap16xx() || cpu_is_omap7xx()) { clk_disable(hhc_clk); @@ -2986,8 +2987,8 @@ static int __devexit omap_udc_remove(struct platform_device *pdev) udc->done = &done; pullup_disable(udc); - if (udc->transceiver) { - usb_put_transceiver(udc->transceiver); + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_put_phy(udc->transceiver); udc->transceiver = NULL; } omap_writew(0, UDC_SYSCON1); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index f7ff9e8..53c093b 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -21,6 +21,7 @@ #include <linux/ioport.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/init.h> @@ -993,7 +994,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) udc = container_of(_gadget, struct pxa25x_udc, gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -EOPNOTSUPP; } @@ -1299,7 +1300,7 @@ fail: DMSG("registered gadget driver '%s'\n", driver->driver.name); /* connect to bus through transceiver */ - if (dev->transceiver) { + if (!IS_ERR_OR_NULL(dev->transceiver)) { retval = otg_set_peripheral(dev->transceiver->otg, &dev->gadget); if (retval) { @@ -1359,7 +1360,7 @@ static int pxa25x_stop(struct usb_gadget_driver *driver) stop_activity(dev, driver); local_irq_enable(); - if (dev->transceiver) + if (!IS_ERR_OR_NULL(dev->transceiver)) (void) otg_set_peripheral(dev->transceiver->otg, NULL); driver->unbind(&dev->gadget); @@ -2159,7 +2160,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; - dev->transceiver = usb_get_transceiver(); + dev->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (gpio_is_valid(dev->mach->gpio_pullup)) { if ((retval = gpio_request(dev->mach->gpio_pullup, @@ -2237,8 +2238,8 @@ lubbock_fail0: if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); err_gpio_pullup: - if (dev->transceiver) { - usb_put_transceiver(dev->transceiver); + if (!IS_ERR_OR_NULL(dev->transceiver)) { + usb_put_phy(dev->transceiver); dev->transceiver = NULL; } clk_put(dev->clk); @@ -2279,8 +2280,8 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) clk_put(dev->clk); - if (dev->transceiver) { - usb_put_transceiver(dev->transceiver); + if (!IS_ERR_OR_NULL(dev->transceiver)) { + usb_put_phy(dev->transceiver); dev->transceiver = NULL; } diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 98acb3a..644b430 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/list.h> @@ -1573,7 +1574,7 @@ static int should_enable_udc(struct pxa_udc *udc) int put_on; put_on = ((udc->pullup_on) && (udc->driver)); - put_on &= ((udc->vbus_sensed) || (!udc->transceiver)); + put_on &= ((udc->vbus_sensed) || (IS_ERR_OR_NULL(udc->transceiver))); return put_on; } @@ -1594,7 +1595,7 @@ static int should_disable_udc(struct pxa_udc *udc) int put_off; put_off = ((!udc->pullup_on) || (!udc->driver)); - put_off |= ((!udc->vbus_sensed) && (udc->transceiver)); + put_off |= ((!udc->vbus_sensed) && (!IS_ERR_OR_NULL(udc->transceiver))); return put_off; } @@ -1665,7 +1666,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) struct pxa_udc *udc; udc = to_gadget_udc(_gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -EOPNOTSUPP; } @@ -1834,7 +1835,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver, dev_dbg(udc->dev, "registered gadget driver '%s'\n", driver->driver.name); - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { retval = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (retval) { @@ -1908,7 +1909,7 @@ static int pxa27x_udc_stop(struct usb_gadget_driver *driver) dev_info(udc->dev, "unregistered gadget driver '%s'\n", driver->driver.name); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return otg_set_peripheral(udc->transceiver->otg, NULL); return 0; } @@ -2464,7 +2465,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; - udc->transceiver = usb_get_transceiver(); + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); gpio = udc->mach->gpio_pullup; if (gpio_is_valid(gpio)) { @@ -2543,7 +2544,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev) if (gpio_is_valid(gpio)) gpio_free(gpio); - usb_put_transceiver(udc->transceiver); + usb_put_phy(udc->transceiver); udc->transceiver = NULL; platform_set_drvdata(_dev, NULL); diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 236b271..e26a4e7 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/otg.h> @@ -1165,7 +1166,7 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, } /* connect to bus through transceiver */ - if (hsudc->transceiver) { + if (!IS_ERR_OR_NULL(hsudc->transceiver)) { ret = otg_set_peripheral(hsudc->transceiver->otg, &hsudc->gadget); if (ret) { @@ -1220,7 +1221,7 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget, s3c_hsudc_stop_activity(hsudc); spin_unlock_irqrestore(&hsudc->lock, flags); - if (hsudc->transceiver) + if (!IS_ERR_OR_NULL(hsudc->transceiver)) (void) otg_set_peripheral(hsudc->transceiver->otg, NULL); disable_irq(hsudc->irq); @@ -1249,7 +1250,7 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) if (!hsudc) return -ENODEV; - if (hsudc->transceiver) + if (!IS_ERR_OR_NULL(hsudc->transceiver)) return usb_phy_set_power(hsudc->transceiver, mA); return -EOPNOTSUPP; @@ -1282,7 +1283,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) hsudc->dev = dev; hsudc->pd = pdev->dev.platform_data; - hsudc->transceiver = usb_get_transceiver(); + hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++) hsudc->supplies[i].supply = s3c_hsudc_supply_names[i]; @@ -1385,8 +1386,8 @@ err_irq: err_remap: release_mem_region(res->start, resource_size(res)); err_res: - if (hsudc->transceiver) - usb_put_transceiver(hsudc->transceiver); + if (!IS_ERR_OR_NULL(hsudc->transceiver)) + usb_put_phy(hsudc->transceiver); regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); err_supplies: diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 3379945..74914de 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -27,6 +27,7 @@ #include <linux/types.h> #include <linux/delay.h> #include <linux/pm.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/fsl_devices.h> @@ -142,15 +143,15 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, if (pdata->operating_mode == FSL_USB2_DR_OTG) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - hcd->phy = usb_get_transceiver(); + hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", hcd, ehci, hcd->phy); - if (hcd->phy) { + if (!IS_ERR_OR_NULL(hcd->phy)) { retval = otg_set_host(hcd->phy->otg, &ehci_to_hcd(ehci)->self); if (retval) { - usb_put_transceiver(hcd->phy); + usb_put_phy(hcd->phy); goto err4; } } else { @@ -191,9 +192,9 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - if (hcd->phy) { + if (!IS_ERR_OR_NULL(hcd->phy)) { otg_set_host(hcd->phy->otg, NULL); - usb_put_transceiver(hcd->phy); + usb_put_phy(hcd->phy); } usb_remove_hcd(hcd); diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 9803a55..6b4ffb5 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -145,8 +145,8 @@ static int ehci_msm_probe(struct platform_device *pdev) * powering up VBUS, mapping of registers address space and power * management. */ - phy = usb_get_transceiver(); - if (!phy) { + phy = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -ENODEV; goto unmap; @@ -169,7 +169,7 @@ static int ehci_msm_probe(struct platform_device *pdev) return 0; put_transceiver: - usb_put_transceiver(phy); + usb_put_phy(phy); unmap: iounmap(hcd->regs); put_hcd: @@ -187,7 +187,7 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); otg_set_host(phy->otg, NULL); - usb_put_transceiver(phy); + usb_put_phy(phy); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index a936bbc..0e8c168 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/usb/otg.h> #include <linux/platform_data/mv_usb.h> @@ -253,8 +254,8 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->mode = pdata->mode; if (ehci_mv->mode == MV_USB_MODE_OTG) { #ifdef CONFIG_USB_OTG_UTILS - ehci_mv->otg = usb_get_transceiver(); - if (!ehci_mv->otg) { + ehci_mv->otg = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(ehci_mv->otg)) { dev_err(&pdev->dev, "unable to find transceiver\n"); retval = -ENODEV; @@ -302,8 +303,8 @@ err_set_vbus: pdata->set_vbus(0); #ifdef CONFIG_USB_OTG_UTILS err_put_transceiver: - if (ehci_mv->otg) - usb_put_transceiver(ehci_mv->otg); + if (!IS_ERR_OR_NULL(ehci_mv->otg)) + usb_put_phy(ehci_mv->otg); #endif err_disable_clk: mv_ehci_disable(ehci_mv); @@ -331,9 +332,9 @@ static int mv_ehci_remove(struct platform_device *pdev) if (hcd->rh_registered) usb_remove_hcd(hcd); - if (ehci_mv->otg) { + if (!IS_ERR_OR_NULL(ehci_mv->otg)) { otg_set_host(ehci_mv->otg->otg, NULL); - usb_put_transceiver(ehci_mv->otg); + usb_put_phy(ehci_mv->otg); } if (ehci_mv->mode == MV_USB_MODE_HOST) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 6854823..477ecfa 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -17,6 +17,7 @@ */ #include <linux/clk.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/platform_data/tegra_usb.h> #include <linux/irq.h> @@ -749,8 +750,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { - tegra->transceiver = usb_get_transceiver(); - if (tegra->transceiver) + tegra->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, &hcd->self); } #endif @@ -773,9 +774,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) fail: #ifdef CONFIG_USB_OTG_UTILS - if (tegra->transceiver) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) { otg_set_host(tegra->transceiver->otg, NULL); - usb_put_transceiver(tegra->transceiver); + usb_put_phy(tegra->transceiver); } #endif tegra_usb_phy_close(tegra->phy); @@ -808,9 +809,9 @@ static int tegra_ehci_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); #ifdef CONFIG_USB_OTG_UTILS - if (tegra->transceiver) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) { otg_set_host(tegra->transceiver->otg, NULL); - usb_put_transceiver(tegra->transceiver); + usb_put_phy(tegra->transceiver); } #endif diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index eccddb4..076d201 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -18,6 +18,7 @@ #include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/gpio.h> #include <mach/hardware.h> @@ -212,14 +213,14 @@ static int ohci_omap_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_OTG if (need_transceiver) { - hcd->phy = usb_get_transceiver(); - if (hcd->phy) { + hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(hcd->phy)) { int status = otg_set_host(hcd->phy->otg, &ohci_to_hcd(ohci)->self); dev_dbg(hcd->self.controller, "init %s phy, status %d\n", hcd->phy->label, status); if (status) { - usb_put_transceiver(hcd->phy); + usb_put_phy(hcd->phy); return status; } } else { @@ -404,9 +405,9 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) struct ohci_hcd *ohci = hcd_to_ohci (hcd); usb_remove_hcd(hcd); - if (hcd->phy) { + if (!IS_ERR_OR_NULL(hcd->phy)) { (void) otg_set_host(hcd->phy->otg, 0); - usb_put_transceiver(hcd->phy); + usb_put_phy(hcd->phy); } if (machine_is_omap_osk()) gpio_free(9); diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 9f3eda9..7a95ab8 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -29,6 +29,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -364,8 +365,8 @@ static int am35x_musb_init(struct musb *musb) return -ENODEV; usb_nop_xceiv_register(); - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; if (is_host_enabled(musb)) @@ -406,7 +407,7 @@ static int am35x_musb_exit(struct musb *musb) if (data->set_phy_power) data->set_phy_power(0); - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); return 0; diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index a087ed6..428e6aa 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/gpio.h> #include <linux/io.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/prefetch.h> @@ -415,8 +416,8 @@ static int bfin_musb_init(struct musb *musb) gpio_direction_output(musb->config->gpio_vrsel, 0); usb_nop_xceiv_register(); - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) { + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) { gpio_free(musb->config->gpio_vrsel); return -ENODEV; } @@ -440,7 +441,7 @@ static int bfin_musb_exit(struct musb *musb) { gpio_free(musb->config->gpio_vrsel); - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); return 0; } diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 8bd9566..0f9fcec 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -29,6 +29,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -425,8 +426,8 @@ static int da8xx_musb_init(struct musb *musb) goto fail; usb_nop_xceiv_register(); - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) goto fail; if (is_host_enabled(musb)) @@ -458,7 +459,7 @@ static int da8xx_musb_exit(struct musb *musb) phy_off(); - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); return 0; diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 9d63ba4..472c8b4 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -28,6 +28,7 @@ #include <linux/list.h> #include <linux/delay.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/platform_device.h> @@ -385,8 +386,8 @@ static int davinci_musb_init(struct musb *musb) u32 revision; usb_nop_xceiv_register(); - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) goto unregister; musb->mregs += DAVINCI_BASE_OFFSET; @@ -444,7 +445,7 @@ static int davinci_musb_init(struct musb *musb) return 0; fail: - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); unregister: usb_nop_xceiv_unregister(); return -ENODEV; @@ -494,7 +495,7 @@ static int davinci_musb_exit(struct musb *musb) phy_off(); - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); return 0; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index db3dff8..26f1bef 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1909,7 +1909,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* The musb_platform_init() call: * - adjusts musb->mregs and musb->isr if needed, * - may initialize an integrated tranceiver - * - initializes musb->xceiv, usually by otg_get_transceiver() + * - initializes musb->xceiv, usually by otg_get_phy() * - stops powering VBUS * * There are various transceiver configurations. Blackfin, diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index f4a40f0..dbcdeea 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -327,7 +327,6 @@ struct musb { irqreturn_t (*isr)(int, void *); struct work_struct irq_work; - struct work_struct otg_notifier_work; u16 hwvers; /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ @@ -373,7 +372,6 @@ struct musb { u16 int_tx; struct usb_phy *xceiv; - u8 xceiv_event; int nIrq; unsigned irq_wake:1; diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 23db42d..217808d 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -31,6 +31,7 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> @@ -376,8 +377,8 @@ static int dsps_musb_init(struct musb *musb) /* NOP driver needs change if supporting dual instance */ usb_nop_xceiv_register(); - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; /* Returns zero if e.g. not clocked */ @@ -409,7 +410,7 @@ static int dsps_musb_init(struct musb *musb) return 0; err0: - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); return status; } @@ -430,7 +431,7 @@ static int dsps_musb_exit(struct musb *musb) data->set_phy_power(0); /* NOP driver needs change if supporting dual instance */ - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); return 0; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index c7785e8..5fdb9da 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -34,6 +34,7 @@ #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> #include <linux/err.h> +#include <linux/usb/musb-omap.h> #include "musb_core.h" #include "omap2430.h" @@ -41,9 +42,13 @@ struct omap2430_glue { struct device *dev; struct platform_device *musb; + enum omap_musb_vbus_id_status status; + struct work_struct omap_musb_mailbox_work; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) +struct omap2430_glue *_glue; + static struct timer_list musb_idle_timer; static void musb_do_idle(unsigned long _musb) @@ -223,50 +228,63 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } -static int musb_otg_notifications(struct notifier_block *nb, - unsigned long event, void *unused) +void omap_musb_mailbox(enum omap_musb_vbus_id_status status) { - struct musb *musb = container_of(nb, struct musb, nb); + struct omap2430_glue *glue = _glue; + struct musb *musb = glue_to_musb(glue); - musb->xceiv_event = event; - schedule_work(&musb->otg_notifier_work); + glue->status = status; + if (!musb) { + dev_err(glue->dev, "musb core is not yet ready\n"); + return; + } - return NOTIFY_OK; + schedule_work(&glue->omap_musb_mailbox_work); } +EXPORT_SYMBOL_GPL(omap_musb_mailbox); -static void musb_otg_notifier_work(struct work_struct *data_notifier_work) +static void omap_musb_set_mailbox(struct omap2430_glue *glue) { - struct musb *musb = container_of(data_notifier_work, struct musb, otg_notifier_work); + struct musb *musb = glue_to_musb(glue); struct device *dev = musb->controller; struct musb_hdrc_platform_data *pdata = dev->platform_data; struct omap_musb_board_data *data = pdata->board_data; + struct usb_otg *otg = musb->xceiv->otg; - switch (musb->xceiv_event) { - case USB_EVENT_ID: - dev_dbg(musb->controller, "ID GND\n"); + switch (glue->status) { + case OMAP_MUSB_ID_GROUND: + dev_dbg(dev, "ID GND\n"); + otg->default_a = true; + musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->last_event = USB_EVENT_ID; if (!is_otg_enabled(musb) || musb->gadget_driver) { - pm_runtime_get_sync(musb->controller); + pm_runtime_get_sync(dev); usb_phy_init(musb->xceiv); omap2430_musb_set_vbus(musb, 1); } break; - case USB_EVENT_VBUS: - dev_dbg(musb->controller, "VBUS Connect\n"); + case OMAP_MUSB_VBUS_VALID: + dev_dbg(dev, "VBUS Connect\n"); + otg->default_a = false; + musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->last_event = USB_EVENT_VBUS; if (musb->gadget_driver) - pm_runtime_get_sync(musb->controller); + pm_runtime_get_sync(dev); usb_phy_init(musb->xceiv); break; - case USB_EVENT_NONE: - dev_dbg(musb->controller, "VBUS Disconnect\n"); + case OMAP_MUSB_ID_FLOAT: + case OMAP_MUSB_VBUS_OFF: + dev_dbg(dev, "VBUS Disconnect\n"); + musb->xceiv->last_event = USB_EVENT_NONE; if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) if (musb->gadget_driver) { - pm_runtime_mark_last_busy(musb->controller); - pm_runtime_put_autosuspend(musb->controller); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); } if (data->interface_type == MUSB_INTERFACE_UTMI) { @@ -276,15 +294,24 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work) usb_phy_shutdown(musb->xceiv); break; default: - dev_dbg(musb->controller, "ID float\n"); + dev_dbg(dev, "ID float\n"); } } + +static void omap_musb_mailbox_work(struct work_struct *mailbox_work) +{ + struct omap2430_glue *glue = container_of(mailbox_work, + struct omap2430_glue, omap_musb_mailbox_work); + omap_musb_set_mailbox(glue); +} + static int omap2430_musb_init(struct musb *musb) { u32 l; int status = 0; struct device *dev = musb->controller; + struct omap2430_glue *glue = dev_get_drvdata(dev->parent); struct musb_hdrc_platform_data *plat = dev->platform_data; struct omap_musb_board_data *data = plat->board_data; @@ -292,14 +319,12 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) { + musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) { pr_err("HS USB OTG: no transceiver configured\n"); return -ENODEV; } - INIT_WORK(&musb->otg_notifier_work, musb_otg_notifier_work); - status = pm_runtime_get_sync(dev); if (status < 0) { dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); @@ -326,14 +351,11 @@ static int omap2430_musb_init(struct musb *musb) musb_readl(musb->mregs, OTG_INTERFSEL), musb_readl(musb->mregs, OTG_SIMENABLE)); - musb->nb.notifier_call = musb_otg_notifications; - status = usb_register_notifier(musb->xceiv, &musb->nb); - - if (status) - dev_dbg(musb->controller, "notification register failed\n"); - setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); + if (glue->status != OMAP_MUSB_UNKNOWN) + omap_musb_set_mailbox(glue); + pm_runtime_put_noidle(musb->controller); return 0; @@ -346,12 +368,13 @@ static void omap2430_musb_enable(struct musb *musb) u8 devctl; unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct device *dev = musb->controller; + struct omap2430_glue *glue = dev_get_drvdata(dev->parent); struct musb_hdrc_platform_data *pdata = dev->platform_data; struct omap_musb_board_data *data = pdata->board_data; - switch (musb->xceiv->last_event) { + switch (glue->status) { - case USB_EVENT_ID: + case OMAP_MUSB_ID_GROUND: usb_phy_init(musb->xceiv); if (data->interface_type != MUSB_INTERFACE_UTMI) break; @@ -370,7 +393,7 @@ static void omap2430_musb_enable(struct musb *musb) } break; - case USB_EVENT_VBUS: + case OMAP_MUSB_VBUS_VALID: usb_phy_init(musb->xceiv); break; @@ -381,17 +404,18 @@ static void omap2430_musb_enable(struct musb *musb) static void omap2430_musb_disable(struct musb *musb) { - if (musb->xceiv->last_event) + struct device *dev = musb->controller; + struct omap2430_glue *glue = dev_get_drvdata(dev->parent); + + if (glue->status != OMAP_MUSB_UNKNOWN) usb_phy_shutdown(musb->xceiv); } static int omap2430_musb_exit(struct musb *musb) { del_timer_sync(&musb_idle_timer); - cancel_work_sync(&musb->otg_notifier_work); omap2430_low_level_exit(musb); - usb_put_transceiver(musb->xceiv); return 0; } @@ -418,7 +442,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev) struct omap2430_glue *glue; int ret = -ENOMEM; - glue = kzalloc(sizeof(*glue), GFP_KERNEL); + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&pdev->dev, "failed to allocate glue context\n"); goto err0; @@ -427,7 +451,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev) musb = platform_device_alloc("musb-hdrc", -1); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err0; } musb->dev.parent = &pdev->dev; @@ -436,22 +460,31 @@ static int __devinit omap2430_probe(struct platform_device *pdev) glue->dev = &pdev->dev; glue->musb = musb; + glue->status = OMAP_MUSB_UNKNOWN; pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); + /* + * REVISIT if we ever have two instances of the wrapper, we will be + * in big trouble + */ + _glue = glue; + + INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work); + ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err2; + goto err1; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err2; + goto err1; } pm_runtime_enable(&pdev->dev); @@ -459,16 +492,13 @@ static int __devinit omap2430_probe(struct platform_device *pdev) ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err2; + goto err1; } return 0; -err2: - platform_device_put(musb); - err1: - kfree(glue); + platform_device_put(musb); err0: return ret; @@ -478,9 +508,9 @@ static int __devexit omap2430_remove(struct platform_device *pdev) { struct omap2430_glue *glue = platform_get_drvdata(pdev); + cancel_work_sync(&glue->omap_musb_mailbox_work); platform_device_del(glue->musb); platform_device_put(glue->musb); - kfree(glue); return 0; } @@ -546,7 +576,7 @@ static int __init omap2430_init(void) { return platform_driver_register(&omap2430_driver); } -module_init(omap2430_init); +subsys_initcall(omap2430_init); static void __exit omap2430_exit(void) { diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index de13559..1a1bd9c 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/init.h> #include <linux/prefetch.h> #include <linux/usb.h> @@ -1078,8 +1079,8 @@ static int tusb_musb_init(struct musb *musb) int ret; usb_nop_xceiv_register(); - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; pdev = to_platform_device(musb->controller); @@ -1130,7 +1131,7 @@ done: if (sync) iounmap(sync); - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); } return ret; @@ -1146,7 +1147,7 @@ static int tusb_musb_exit(struct musb *musb) iounmap(musb->sync_va); - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); usb_nop_xceiv_unregister(); return 0; } diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index aa09dd4..a8c0fad 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> @@ -37,8 +38,8 @@ struct ux500_glue { static int ux500_musb_init(struct musb *musb) { - musb->xceiv = usb_get_transceiver(); - if (!musb->xceiv) { + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(musb->xceiv)) { pr_err("HS USB OTG: no transceiver configured\n"); return -ENODEV; } @@ -48,7 +49,7 @@ static int ux500_musb_init(struct musb *musb) static int ux500_musb_exit(struct musb *musb) { - usb_put_transceiver(musb->xceiv); + usb_put_phy(musb->xceiv); return 0; } diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c index a84af67..ae8ad56 100644 --- a/drivers/usb/otg/ab8500-usb.c +++ b/drivers/usb/otg/ab8500-usb.c @@ -529,7 +529,7 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev) if (err < 0) goto fail0; - err = usb_set_transceiver(&ab->phy); + err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2); if (err) { dev_err(&pdev->dev, "Can't register transceiver\n"); goto fail1; @@ -556,7 +556,7 @@ static int __devexit ab8500_usb_remove(struct platform_device *pdev) cancel_work_sync(&ab->phy_dis_work); - usb_set_transceiver(NULL); + usb_remove_phy(&ab->phy); ab8500_usb_host_phy_dis(ab); ab8500_usb_peri_phy_dis(ab); diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c index be4a63e..23c798c 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/otg/fsl_otg.c @@ -806,7 +806,7 @@ static int fsl_otg_conf(struct platform_device *pdev) fsl_otg_dev = fsl_otg_tc; /* Store the otg transceiver */ - status = usb_set_transceiver(&fsl_otg_tc->phy); + status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2); if (status) { pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n"); goto err; @@ -824,7 +824,7 @@ err: int usb_otg_start(struct platform_device *pdev) { struct fsl_otg *p_otg; - struct usb_phy *otg_trans = usb_get_transceiver(); + struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2); struct otg_fsm *fsm; int status; struct resource *res; @@ -1134,7 +1134,7 @@ static int __devexit fsl_otg_remove(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - usb_set_transceiver(NULL); + usb_remove_phy(&fsl_otg_dev->phy); free_irq(fsl_otg_dev->irq, fsl_otg_dev); iounmap((void *)usb_dr_regs); diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index bde6298..a67ffe2 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -320,7 +320,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) } /* only active when a gadget is registered */ - err = usb_set_transceiver(&gpio_vbus->phy); + err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2); if (err) { dev_err(&pdev->dev, "can't register transceiver, err: %d\n", err); @@ -354,7 +354,7 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev) cancel_delayed_work_sync(&gpio_vbus->work); regulator_put(gpio_vbus->vbus_draw); - usb_set_transceiver(NULL); + usb_remove_phy(&gpio_vbus->phy); free_irq(gpio_vbus->irq, pdev); if (gpio_is_valid(pdata->gpio_pullup)) diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index 70cf5d7..75cea4a 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -1336,9 +1336,6 @@ static int isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); -#ifndef CONFIG_USB_OTG - u32 l; -#endif if (!otg || isp != the_transceiver) return -ENODEV; @@ -1365,10 +1362,14 @@ isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) otg->gadget = gadget; // FIXME update its refcount - l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS); - l |= OTG_ID; - omap_writel(l, OTG_CTRL); + { + u32 l; + + l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; + l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS); + l |= OTG_ID; + omap_writel(l, OTG_CTRL); + } power_up(isp); isp->phy.state = OTG_STATE_B_IDLE; @@ -1610,7 +1611,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES); #endif - status = usb_set_transceiver(&isp->phy); + status = usb_add_phy(&isp->phy, USB_PHY_TYPE_USB2); if (status < 0) dev_err(&i2c->dev, "can't register transceiver, %d\n", status); @@ -1649,7 +1650,7 @@ subsys_initcall(isp_init); static void __exit isp_exit(void) { if (the_transceiver) - usb_set_transceiver(NULL); + usb_remove_phy(&the_transceiver->phy); i2c_del_driver(&isp1301_driver); } module_exit(isp_exit); diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c index 1d0347c..9f5fc90 100644 --- a/drivers/usb/otg/msm_otg.c +++ b/drivers/usb/otg/msm_otg.c @@ -1555,9 +1555,9 @@ static int __init msm_otg_probe(struct platform_device *pdev) phy->otg->set_host = msm_otg_set_host; phy->otg->set_peripheral = msm_otg_set_peripheral; - ret = usb_set_transceiver(&motg->phy); + ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); if (ret) { - dev_err(&pdev->dev, "usb_set_transceiver failed\n"); + dev_err(&pdev->dev, "usb_add_phy failed\n"); goto free_irq; } @@ -1624,7 +1624,7 @@ static int __devexit msm_otg_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 0); pm_runtime_disable(&pdev->dev); - usb_set_transceiver(NULL); + usb_remove_phy(phy); free_irq(motg->irq, motg); /* diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c index 6cc6c3f..3f124e8 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/otg/mv_otg.c @@ -690,7 +690,7 @@ int mv_otg_remove(struct platform_device *pdev) for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++) clk_put(mvotg->clk[clk_i]); - usb_set_transceiver(NULL); + usb_remove_phy(&mvotg->phy); platform_set_drvdata(pdev, NULL); kfree(mvotg->phy.otg); @@ -853,7 +853,7 @@ static int mv_otg_probe(struct platform_device *pdev) goto err_disable_clk; } - retval = usb_set_transceiver(&mvotg->phy); + retval = usb_add_phy(&mvotg->phy, USB_PHY_TYPE_USB2); if (retval < 0) { dev_err(&pdev->dev, "can't register transceiver, %d\n", retval); @@ -880,7 +880,7 @@ static int mv_otg_probe(struct platform_device *pdev) return 0; err_set_transceiver: - usb_set_transceiver(NULL); + usb_remove_phy(&mvotg->phy); err_free_irq: free_irq(mvotg->irq, mvotg); err_disable_clk: diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index 58b26df..803f958 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -117,7 +117,7 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) nop->phy.otg->set_host = nop_set_host; nop->phy.otg->set_peripheral = nop_set_peripheral; - err = usb_set_transceiver(&nop->phy); + err = usb_add_phy(&nop->phy, USB_PHY_TYPE_USB2); if (err) { dev_err(&pdev->dev, "can't register transceiver, err: %d\n", err); @@ -139,7 +139,7 @@ static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev) { struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); - usb_set_transceiver(NULL); + usb_remove_phy(&nop->phy); platform_set_drvdata(pdev, NULL); kfree(nop->phy.otg); diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c index 801e597..1bf60a2 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/otg/otg.c @@ -11,60 +11,195 @@ #include <linux/kernel.h> #include <linux/export.h> +#include <linux/err.h> #include <linux/device.h> +#include <linux/slab.h> #include <linux/usb/otg.h> -static struct usb_phy *phy; +static LIST_HEAD(phy_list); +static DEFINE_SPINLOCK(phy_lock); + +static struct usb_phy *__usb_find_phy(struct list_head *list, + enum usb_phy_type type) +{ + struct usb_phy *phy = NULL; + + list_for_each_entry(phy, list, head) { + if (phy->type != type) + continue; + + return phy; + } + + return ERR_PTR(-ENODEV); +} + +static void devm_usb_phy_release(struct device *dev, void *res) +{ + struct usb_phy *phy = *(struct usb_phy **)res; + + usb_put_phy(phy); +} + +static int devm_usb_phy_match(struct device *dev, void *res, void *match_data) +{ + return res == match_data; +} /** - * usb_get_transceiver - find the (single) USB transceiver + * devm_usb_get_phy - find the USB PHY + * @dev - device that requests this phy + * @type - the type of the phy the controller requires * - * Returns the transceiver driver, after getting a refcount to it; or - * null if there is no such transceiver. The caller is responsible for - * calling usb_put_transceiver() to release that count. + * Gets the phy using usb_get_phy(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. * * For use by USB host and peripheral drivers. */ -struct usb_phy *usb_get_transceiver(void) +struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type) { - if (phy) - get_device(phy->dev); + struct usb_phy **ptr, *phy; + + ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return NULL; + + phy = usb_get_phy(type); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else + devres_free(ptr); + + return phy; +} +EXPORT_SYMBOL(devm_usb_get_phy); + +/** + * usb_get_phy - find the USB PHY + * @type - the type of the phy the controller requires + * + * Returns the phy driver, after getting a refcount to it; or + * -ENODEV if there is no such phy. The caller is responsible for + * calling usb_put_phy() to release that count. + * + * For use by USB host and peripheral drivers. + */ +struct usb_phy *usb_get_phy(enum usb_phy_type type) +{ + struct usb_phy *phy = NULL; + unsigned long flags; + + spin_lock_irqsave(&phy_lock, flags); + + phy = __usb_find_phy(&phy_list, type); + if (IS_ERR(phy)) { + pr_err("unable to find transceiver of type %s\n", + usb_phy_type_string(type)); + goto err0; + } + + get_device(phy->dev); + +err0: + spin_unlock_irqrestore(&phy_lock, flags); + return phy; } -EXPORT_SYMBOL(usb_get_transceiver); +EXPORT_SYMBOL(usb_get_phy); + +/** + * devm_usb_put_phy - release the USB PHY + * @dev - device that wants to release this phy + * @phy - the phy returned by devm_usb_get_phy() + * + * destroys the devres associated with this phy and invokes usb_put_phy + * to release the phy. + * + * For use by USB host and peripheral drivers. + */ +void devm_usb_put_phy(struct device *dev, struct usb_phy *phy) +{ + int r; + + r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy); + dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); +} +EXPORT_SYMBOL(devm_usb_put_phy); /** - * usb_put_transceiver - release the (single) USB transceiver - * @x: the transceiver returned by usb_get_transceiver() + * usb_put_phy - release the USB PHY + * @x: the phy returned by usb_get_phy() * - * Releases a refcount the caller received from usb_get_transceiver(). + * Releases a refcount the caller received from usb_get_phy(). * * For use by USB host and peripheral drivers. */ -void usb_put_transceiver(struct usb_phy *x) +void usb_put_phy(struct usb_phy *x) { if (x) put_device(x->dev); } -EXPORT_SYMBOL(usb_put_transceiver); +EXPORT_SYMBOL(usb_put_phy); /** - * usb_set_transceiver - declare the (single) USB transceiver - * @x: the USB transceiver to be used; or NULL + * usb_add_phy - declare the USB PHY + * @x: the USB phy to be used; or NULL + * @type - the type of this PHY * - * This call is exclusively for use by transceiver drivers, which + * This call is exclusively for use by phy drivers, which * coordinate the activities of drivers for host and peripheral * controllers, and in some cases for VBUS current regulation. */ -int usb_set_transceiver(struct usb_phy *x) +int usb_add_phy(struct usb_phy *x, enum usb_phy_type type) +{ + int ret = 0; + unsigned long flags; + struct usb_phy *phy; + + if (x && x->type != USB_PHY_TYPE_UNDEFINED) { + dev_err(x->dev, "not accepting initialized PHY %s\n", x->label); + return -EINVAL; + } + + spin_lock_irqsave(&phy_lock, flags); + + list_for_each_entry(phy, &phy_list, head) { + if (phy->type == type) { + ret = -EBUSY; + dev_err(x->dev, "transceiver type %s already exists\n", + usb_phy_type_string(type)); + goto out; + } + } + + x->type = type; + list_add_tail(&x->head, &phy_list); + +out: + spin_unlock_irqrestore(&phy_lock, flags); + return ret; +} +EXPORT_SYMBOL(usb_add_phy); + +/** + * usb_remove_phy - remove the OTG PHY + * @x: the USB OTG PHY to be removed; + * + * This reverts the effects of usb_add_phy + */ +void usb_remove_phy(struct usb_phy *x) { - if (phy && x) - return -EBUSY; - phy = x; - return 0; + unsigned long flags; + + spin_lock_irqsave(&phy_lock, flags); + if (x) + list_del(&x->head); + spin_unlock_irqrestore(&phy_lock, flags); } -EXPORT_SYMBOL(usb_set_transceiver); +EXPORT_SYMBOL(usb_remove_phy); const char *otg_state_string(enum usb_otg_state state) { diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index c4a86da..523cad5 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -33,11 +33,11 @@ #include <linux/io.h> #include <linux/delay.h> #include <linux/usb/otg.h> +#include <linux/usb/musb-omap.h> #include <linux/usb/ulpi.h> #include <linux/i2c/twl.h> #include <linux/regulator/consumer.h> #include <linux/err.h> -#include <linux/notifier.h> #include <linux/slab.h> /* Register defines */ @@ -159,7 +159,7 @@ struct twl4030_usb { enum twl4030_usb_mode usb_mode; int irq; - u8 linkstat; + enum omap_musb_vbus_id_status linkstat; bool vbus_supplied; u8 asleep; bool irq_enabled; @@ -246,11 +246,11 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) /*-------------------------------------------------------------------------*/ -static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl) +static enum omap_musb_vbus_id_status + twl4030_usb_linkstat(struct twl4030_usb *twl) { int status; - int linkstat = USB_EVENT_NONE; - struct usb_otg *otg = twl->phy.otg; + enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN; twl->vbus_supplied = false; @@ -273,30 +273,23 @@ static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl) twl->vbus_supplied = true; if (status & BIT(2)) - linkstat = USB_EVENT_ID; + linkstat = OMAP_MUSB_ID_GROUND; else - linkstat = USB_EVENT_VBUS; - } else - linkstat = USB_EVENT_NONE; + linkstat = OMAP_MUSB_VBUS_VALID; + } else { + if (twl->linkstat != OMAP_MUSB_UNKNOWN) + linkstat = OMAP_MUSB_VBUS_OFF; + } dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", status, status, linkstat); - twl->phy.last_event = linkstat; - /* REVISIT this assumes host and peripheral controllers * are registered, and that both are active... */ spin_lock_irq(&twl->lock); twl->linkstat = linkstat; - if (linkstat == USB_EVENT_ID) { - otg->default_a = true; - twl->phy.state = OTG_STATE_A_IDLE; - } else { - otg->default_a = false; - twl->phy.state = OTG_STATE_B_IDLE; - } spin_unlock_irq(&twl->lock); return linkstat; @@ -501,10 +494,10 @@ static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); static irqreturn_t twl4030_usb_irq(int irq, void *_twl) { struct twl4030_usb *twl = _twl; - int status; + enum omap_musb_vbus_id_status status; status = twl4030_usb_linkstat(twl); - if (status >= 0) { + if (status > 0) { /* FIXME add a set_power() method so that B-devices can * configure the charger appropriately. It's not always * correct to consume VBUS power, and how much current to @@ -516,13 +509,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ - if (status == USB_EVENT_NONE) + if (status == OMAP_MUSB_VBUS_OFF || + status == OMAP_MUSB_ID_FLOAT) twl4030_phy_suspend(twl, 0); else twl4030_phy_resume(twl); - atomic_notifier_call_chain(&twl->phy.notifier, status, - twl->phy.otg->gadget); + omap_musb_mailbox(twl->linkstat); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); @@ -531,11 +524,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) static void twl4030_usb_phy_init(struct twl4030_usb *twl) { - int status; + enum omap_musb_vbus_id_status status; status = twl4030_usb_linkstat(twl); - if (status >= 0) { - if (status == USB_EVENT_NONE) { + if (status > 0) { + if (status == OMAP_MUSB_VBUS_OFF || + status == OMAP_MUSB_ID_FLOAT) { __twl4030_phy_power(twl, 0); twl->asleep = 1; } else { @@ -543,8 +537,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl) twl->asleep = 0; } - atomic_notifier_call_chain(&twl->phy.notifier, status, - twl->phy.otg->gadget); + omap_musb_mailbox(twl->linkstat); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); } @@ -598,21 +591,20 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) return -EINVAL; } - twl = kzalloc(sizeof *twl, GFP_KERNEL); + twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; - otg = kzalloc(sizeof *otg, GFP_KERNEL); - if (!otg) { - kfree(twl); + otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); + if (!otg) return -ENOMEM; - } twl->dev = &pdev->dev; twl->irq = platform_get_irq(pdev, 0); twl->usb_mode = pdata->usb_mode; twl->vbus_supplied = false; twl->asleep = 1; + twl->linkstat = OMAP_MUSB_UNKNOWN; twl->phy.dev = twl->dev; twl->phy.label = "twl4030"; @@ -629,18 +621,14 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) err = twl4030_usb_ldo_init(twl); if (err) { dev_err(&pdev->dev, "ldo init failed\n"); - kfree(otg); - kfree(twl); return err; } - usb_set_transceiver(&twl->phy); + usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2); platform_set_drvdata(pdev, twl); if (device_create_file(&pdev->dev, &dev_attr_vbus)) dev_warn(&pdev->dev, "could not create sysfs file\n"); - ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier); - /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. * @@ -651,13 +639,11 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) */ twl->irq_enabled = true; status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "twl4030_usb", twl); + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | + IRQF_ONESHOT, "twl4030_usb", twl); if (status < 0) { dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", twl->irq, status); - kfree(otg); - kfree(twl); return status; } @@ -701,9 +687,6 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) regulator_put(twl->usb1v8); regulator_put(twl->usb3v1); - kfree(twl->phy.otg); - kfree(twl); - return 0; } diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index 0eabb04..a3d0c04 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -26,10 +26,10 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/usb/otg.h> +#include <linux/usb/musb-omap.h> #include <linux/i2c/twl.h> #include <linux/regulator/consumer.h> #include <linux/err.h> -#include <linux/notifier.h> #include <linux/slab.h> #include <linux/delay.h> @@ -100,7 +100,7 @@ struct twl6030_usb { int irq1; int irq2; - u8 linkstat; + enum omap_musb_vbus_id_status linkstat; u8 asleep; bool irq_enabled; bool vbus_enable; @@ -147,7 +147,7 @@ static int twl6030_phy_init(struct usb_phy *x) dev = twl->dev; pdata = dev->platform_data; - if (twl->linkstat == USB_EVENT_ID) + if (twl->linkstat == OMAP_MUSB_ID_GROUND) pdata->phy_power(twl->dev, 1, 1); else pdata->phy_power(twl->dev, 0, 1); @@ -235,13 +235,13 @@ static ssize_t twl6030_usb_vbus_show(struct device *dev, spin_lock_irqsave(&twl->lock, flags); switch (twl->linkstat) { - case USB_EVENT_VBUS: + case OMAP_MUSB_VBUS_VALID: ret = snprintf(buf, PAGE_SIZE, "vbus\n"); break; - case USB_EVENT_ID: + case OMAP_MUSB_ID_GROUND: ret = snprintf(buf, PAGE_SIZE, "id\n"); break; - case USB_EVENT_NONE: + case OMAP_MUSB_VBUS_OFF: ret = snprintf(buf, PAGE_SIZE, "none\n"); break; default: @@ -256,8 +256,7 @@ static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); static irqreturn_t twl6030_usb_irq(int irq, void *_twl) { struct twl6030_usb *twl = _twl; - struct usb_otg *otg = twl->phy.otg; - int status; + enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; u8 vbus_state, hw_state; hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); @@ -268,22 +267,18 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) if (vbus_state & VBUS_DET) { regulator_enable(twl->usb3v3); twl->asleep = 1; - status = USB_EVENT_VBUS; - otg->default_a = false; - twl->phy.state = OTG_STATE_B_IDLE; + status = OMAP_MUSB_VBUS_VALID; twl->linkstat = status; - twl->phy.last_event = status; - atomic_notifier_call_chain(&twl->phy.notifier, - status, otg->gadget); + omap_musb_mailbox(status); } else { - status = USB_EVENT_NONE; - twl->linkstat = status; - twl->phy.last_event = status; - atomic_notifier_call_chain(&twl->phy.notifier, - status, otg->gadget); - if (twl->asleep) { - regulator_disable(twl->usb3v3); - twl->asleep = 0; + if (twl->linkstat != OMAP_MUSB_UNKNOWN) { + status = OMAP_MUSB_VBUS_OFF; + twl->linkstat = status; + omap_musb_mailbox(status); + if (twl->asleep) { + regulator_disable(twl->usb3v3); + twl->asleep = 0; + } } } } @@ -295,8 +290,7 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) { struct twl6030_usb *twl = _twl; - struct usb_otg *otg = twl->phy.otg; - int status = USB_EVENT_NONE; + enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; u8 hw_state; hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); @@ -307,13 +301,11 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) twl->asleep = 1; twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); - status = USB_EVENT_ID; + status = OMAP_MUSB_ID_GROUND; otg->default_a = true; twl->phy.state = OTG_STATE_A_IDLE; twl->linkstat = status; - twl->phy.last_event = status; - atomic_notifier_call_chain(&twl->phy.notifier, status, - otg->gadget); + omap_musb_mailbox(status); } else { twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); @@ -402,20 +394,19 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; pdata = dev->platform_data; - twl = kzalloc(sizeof *twl, GFP_KERNEL); + twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; - otg = kzalloc(sizeof *otg, GFP_KERNEL); - if (!otg) { - kfree(twl); + otg = devm_kzalloc(dev, sizeof *otg, GFP_KERNEL); + if (!otg) return -ENOMEM; - } twl->dev = &pdev->dev; twl->irq1 = platform_get_irq(pdev, 0); twl->irq2 = platform_get_irq(pdev, 1); twl->features = pdata->features; + twl->linkstat = OMAP_MUSB_UNKNOWN; twl->phy.dev = twl->dev; twl->phy.label = "twl6030"; @@ -436,18 +427,14 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) err = twl6030_usb_ldo_init(twl); if (err) { dev_err(&pdev->dev, "ldo init failed\n"); - kfree(otg); - kfree(twl); return err; } - usb_set_transceiver(&twl->phy); + usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2); platform_set_drvdata(pdev, twl); if (device_create_file(&pdev->dev, &dev_attr_vbus)) dev_warn(&pdev->dev, "could not create sysfs file\n"); - ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier); - INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); twl->irq_enabled = true; @@ -458,8 +445,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", twl->irq1, status); device_remove_file(twl->dev, &dev_attr_vbus); - kfree(otg); - kfree(twl); return status; } @@ -471,8 +456,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) twl->irq2, status); free_irq(twl->irq1, twl); device_remove_file(twl->dev, &dev_attr_vbus); - kfree(otg); - kfree(twl); return status; } @@ -503,8 +486,6 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev) pdata->phy_exit(twl->dev); device_remove_file(twl->dev, &dev_attr_vbus); cancel_work_sync(&twl->set_vbus_work); - kfree(twl->phy.otg); - kfree(twl); return 0; } diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h new file mode 100644 index 0000000..7774c59 --- /dev/null +++ b/include/linux/usb/musb-omap.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2011-2012 by Texas Instruments + * + * The Inventra Controller Driver for Linux is free software; you + * can redistribute it and/or modify it under the terms of the GNU + * General Public License version 2 as published by the Free Software + * Foundation. + */ + +#ifndef __MUSB_OMAP_H__ +#define __MUSB_OMAP_H__ + +enum omap_musb_vbus_id_status { + OMAP_MUSB_UNKNOWN = 0, + OMAP_MUSB_ID_GROUND, + OMAP_MUSB_ID_FLOAT, + OMAP_MUSB_VBUS_VALID, + OMAP_MUSB_VBUS_OFF, +}; + +#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \ + defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)) +void omap_musb_mailbox(enum omap_musb_vbus_id_status status); +#else +static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status) +{ +} +#endif + +#endif /* __MUSB_OMAP_H__ */ diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 38ab3f4..0cb2ec2 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -43,6 +43,13 @@ enum usb_phy_events { USB_EVENT_ENUMERATED, /* gadget driver enumerated */ }; +/* associate a type with PHY */ +enum usb_phy_type { + USB_PHY_TYPE_UNDEFINED, + USB_PHY_TYPE_USB2, + USB_PHY_TYPE_USB3, +}; + struct usb_phy; /* for transceivers connected thru an ULPI interface, the user must @@ -89,6 +96,7 @@ struct usb_phy { const char *label; unsigned int flags; + enum usb_phy_type type; enum usb_otg_state state; enum usb_phy_events last_event; @@ -105,6 +113,9 @@ struct usb_phy { u16 port_status; u16 port_change; + /* to support controllers that have multiple transceivers */ + struct list_head head; + /* initialize/shutdown the OTG controller */ int (*init)(struct usb_phy *x); void (*shutdown)(struct usb_phy *x); @@ -121,7 +132,8 @@ struct usb_phy { /* for board-specific init logic */ -extern int usb_set_transceiver(struct usb_phy *); +extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); +extern void usb_remove_phy(struct usb_phy *); #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ @@ -172,16 +184,29 @@ usb_phy_shutdown(struct usb_phy *x) /* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *usb_get_transceiver(void); -extern void usb_put_transceiver(struct usb_phy *); +extern struct usb_phy *usb_get_phy(enum usb_phy_type type); +extern struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type); +extern void usb_put_phy(struct usb_phy *); +extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *usb_get_transceiver(void) +static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) +{ + return NULL; +} + +static inline struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type) { return NULL; } -static inline void usb_put_transceiver(struct usb_phy *x) +static inline void usb_put_phy(struct usb_phy *x) +{ +} + +static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) { } @@ -276,4 +301,15 @@ usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); +static inline const char *usb_phy_type_string(enum usb_phy_type type) +{ + switch (type) { + case USB_PHY_TYPE_USB2: + return "USB2 PHY"; + case USB_PHY_TYPE_USB3: + return "USB3 PHY"; + default: + return "UNKNOWN PHY TYPE"; + } +} #endif /* __LINUX_USB_OTG_H */ |