diff options
Diffstat (limited to 'Documentation')
130 files changed, 6735 insertions, 1663 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 433cf5e..5f7f7d7 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -24,6 +24,8 @@ DMA-mapping.txt - info for PCI drivers using DMA portably across all platforms. DocBook/ - directory with DocBook templates etc. for kernel documentation. +HOWTO + - The process and procedures of how to do Linux kernel development. IO-mapping.txt - how to access I/O mapped memory from within device drivers. IPMI.txt @@ -256,6 +258,10 @@ specialix.txt - info on hardware/driver for specialix IO8+ multiport serial card. spinlocks.txt - info on using spinlocks to provide exclusive access in kernel. +stable_api_nonsense.txt + - info on why the kernel does not have a stable in-kernel api or abi. +stable_kernel_rules.txt + - rules and procedures for the -stable kernel releases. stallion.txt - info on using the Stallion multiport serial driver. svga.txt diff --git a/Documentation/Changes b/Documentation/Changes index 5eaab04..86b8639 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -65,7 +65,7 @@ o isdn4k-utils 3.1pre1 # isdnctrl 2>&1|grep version o nfs-utils 1.0.5 # showmount --version o procps 3.2.0 # ps --version o oprofile 0.9 # oprofiled --version -o udev 058 # udevinfo -V +o udev 071 # udevinfo -V Kernel compilation ================== @@ -139,9 +139,14 @@ You'll probably want to upgrade. Ksymoops -------- -If the unthinkable happens and your kernel oopses, you'll need a 2.4 -version of ksymoops to decode the report; see REPORTING-BUGS in the -root of the Linux source for more information. +If the unthinkable happens and your kernel oopses, you may need the +ksymoops tool to decode it, but in most cases you don't. +In the 2.6 kernel it is generally preferred to build the kernel with +CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is +(this also produces better output than ksymoops). +If for some reason your kernel is not build with CONFIG_KALLSYMS and +you have no way to rebuild and reproduce the Oops with that option, then +you can still decode that Oops with ksymoops. Module-Init-Tools ----------------- @@ -237,6 +242,12 @@ udev udev is a userspace application for populating /dev dynamically with only entries for devices actually present. udev replaces devfs. +FUSE +---- + +Needs libfuse 2.4.0 or later. Absolute minimum is 2.3.0 but mount +options 'direct_io' and 'kernel_cache' won't work. + Networking ========== @@ -390,6 +401,10 @@ udev ---- o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html> +FUSE +---- +o <http://sourceforge.net/projects/fuse> + Networking ********** diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index fa3e29a..1c95588 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -10,7 +10,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ procfs-guide.xml writing_usb_driver.xml \ sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \ - gadget.xml libata.xml mtdnand.xml librs.xml + gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml ### # The build process is as follows (targets): @@ -20,6 +20,12 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ # +--> DIR=file (htmldocs) # +--> man/ (mandocs) + +# for PDF and PS output you can choose between xmlto and docbook-utils tools +PDF_METHOD = $(prefer-db2x) +PS_METHOD = $(prefer-db2x) + + ### # The targets that may be used. .PHONY: xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs @@ -93,27 +99,39 @@ C-procfs-example = procfs_example.xml C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) $(obj)/procfs-guide.xml: $(C-procfs-example2) -### -# Rules to generate postscript, PDF and HTML -# db2html creates a directory. Generate a html file used for timestamp +notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \ + exit 1 +db2xtemplate = db2TYPE -o $(dir $@) $< +xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $< + +# determine which methods are available +ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found) + use-db2x = db2x + prefer-db2x = db2x +else + use-db2x = notfound + prefer-db2x = $(use-xmlto) +endif +ifeq ($(shell which xmlto >/dev/null 2>&1 && echo found),found) + use-xmlto = xmlto + prefer-xmlto = xmlto +else + use-xmlto = notfound + prefer-xmlto = $(use-db2x) +endif -quiet_cmd_db2ps = XMLTO $@ - cmd_db2ps = xmlto ps $(XMLTOFLAGS) -o $(dir $@) $< +# the commands, generated from the chosen template +quiet_cmd_db2ps = PS $@ + cmd_db2ps = $(subst TYPE,ps, $($(PS_METHOD)template)) %.ps : %.xml - @(which xmlto > /dev/null 2>&1) || \ - (echo "*** You need to install xmlto ***"; \ - exit 1) $(call cmd,db2ps) -quiet_cmd_db2pdf = XMLTO $@ - cmd_db2pdf = xmlto pdf $(XMLTOFLAGS) -o $(dir $@) $< +quiet_cmd_db2pdf = PDF $@ + cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template)) %.pdf : %.xml - @(which xmlto > /dev/null 2>&1) || \ - (echo "*** You need to install xmlto ***"; \ - exit 1) $(call cmd,db2pdf) -quiet_cmd_db2html = XMLTO $@ +quiet_cmd_db2html = HTML $@ cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \ echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \ Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@ @@ -127,7 +145,7 @@ quiet_cmd_db2html = XMLTO $@ @if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \ cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi -quiet_cmd_db2man = XMLTO $@ +quiet_cmd_db2man = MAN $@ cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi %.9 : %.xml @(which xmlto > /dev/null 2>&1) || \ diff --git a/Documentation/DocBook/journal-api.tmpl b/Documentation/DocBook/journal-api.tmpl index 341aaa4..2077f9a 100644 --- a/Documentation/DocBook/journal-api.tmpl +++ b/Documentation/DocBook/journal-api.tmpl @@ -306,7 +306,7 @@ an example. </para> <sect1><title>Journal Level</title> !Efs/jbd/journal.c -!Efs/jbd/recovery.c +!Ifs/jbd/recovery.c </sect1> <sect1><title>Transasction Level</title> !Efs/jbd/transaction.c diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index d650ce3..767433b 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -68,9 +68,7 @@ X!Iinclude/linux/kobject.h <sect1><title>Kernel utility functions</title> !Iinclude/linux/kernel.h -<!-- This needs to clean up to make kernel-doc happy -X!Ekernel/printk.c - --> +!Ekernel/printk.c !Ekernel/panic.c !Ekernel/sys.c !Ekernel/rcupdate.c @@ -118,7 +116,7 @@ X!Ilib/string.c </sect1> <sect1><title>User Space Memory Access</title> !Iinclude/asm-i386/uaccess.h -!Iarch/i386/lib/usercopy.c +!Earch/i386/lib/usercopy.c </sect1> <sect1><title>More Memory Management Functions</title> !Iinclude/linux/rmap.h @@ -174,7 +172,6 @@ X!Ilib/string.c <title>The Linux VFS</title> <sect1><title>The Filesystem types</title> !Iinclude/linux/fs.h -!Einclude/linux/fs.h </sect1> <sect1><title>The Directory Cache</title> !Efs/dcache.c @@ -239,9 +236,11 @@ X!Ilib/string.c <title>Network device support</title> <sect1><title>Driver Support</title> !Enet/core/dev.c - </sect1> - <sect1><title>8390 Based Network Cards</title> -!Edrivers/net/8390.c +!Enet/ethernet/eth.c +!Iinclude/linux/etherdevice.h +<!-- FIXME: Removed for now since no structured comments in source +X!Enet/core/wireless.c +--> </sect1> <sect1><title>Synchronous PPP</title> !Edrivers/net/wan/syncppp.c @@ -266,7 +265,7 @@ X!Ekernel/module.c <chapter id="hardware"> <title>Hardware Interfaces</title> <sect1><title>Interrupt Handling</title> -!Ikernel/irq/manage.c +!Ekernel/irq/manage.c </sect1> <sect1><title>Resources Management</title> @@ -286,7 +285,9 @@ X!Edrivers/pci/search.c --> !Edrivers/pci/msi.c !Edrivers/pci/bus.c -!Edrivers/pci/hotplug.c +<!-- FIXME: Removed for now since no structured comments in source +X!Edrivers/pci/hotplug.c +--> !Edrivers/pci/probe.c !Edrivers/pci/rom.c </sect1> @@ -387,7 +388,7 @@ X!Edrivers/pnp/system.c <chapter id="blkdev"> <title>Block Devices</title> -!Edrivers/block/ll_rw_blk.c +!Eblock/ll_rw_blk.c </chapter> <chapter id="miscdev"> @@ -499,7 +500,7 @@ KAO --> !Edrivers/video/modedb.c </sect1> <sect1><title>Frame Buffer Macintosh Video Mode Database</title> -!Idrivers/video/macmodes.c +!Edrivers/video/macmodes.c </sect1> <sect1><title>Frame Buffer Fonts</title> <para> diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 375ae76..d260d92 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -415,6 +415,362 @@ and other resources, etc. </sect1> </chapter> + <chapter id="libataEH"> + <title>Error handling</title> + + <para> + This chapter describes how errors are handled under libata. + Readers are advised to read SCSI EH + (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first. + </para> + + <sect1><title>Origins of commands</title> + <para> + In libata, a command is represented with struct ata_queued_cmd + or qc. qc's are preallocated during port initialization and + repetitively used for command executions. Currently only one + qc is allocated per port but yet-to-be-merged NCQ branch + allocates one for each tag and maps each qc to NCQ tag 1-to-1. + </para> + <para> + libata commands can originate from two sources - libata itself + and SCSI midlayer. libata internal commands are used for + initialization and error handling. All normal blk requests + and commands for SCSI emulation are passed as SCSI commands + through queuecommand callback of SCSI host template. + </para> + </sect1> + + <sect1><title>How commands are issued</title> + + <variablelist> + + <varlistentry><term>Internal commands</term> + <listitem> + <para> + First, qc is allocated and initialized using + ata_qc_new_init(). Although ata_qc_new_init() doesn't + implement any wait or retry mechanism when qc is not + available, internal commands are currently issued only during + initialization and error recovery, so no other command is + active and allocation is guaranteed to succeed. + </para> + <para> + Once allocated qc's taskfile is initialized for the command to + be executed. qc currently has two mechanisms to notify + completion. One is via qc->complete_fn() callback and the + other is completion qc->waiting. qc->complete_fn() callback + is the asynchronous path used by normal SCSI translated + commands and qc->waiting is the synchronous (issuer sleeps in + process context) path used by internal commands. + </para> + <para> + Once initialization is complete, host_set lock is acquired + and the qc is issued. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>SCSI commands</term> + <listitem> + <para> + All libata drivers use ata_scsi_queuecmd() as + hostt->queuecommand callback. scmds can either be simulated + or translated. No qc is involved in processing a simulated + scmd. The result is computed right away and the scmd is + completed. + </para> + <para> + For a translated scmd, ata_qc_new_init() is invoked to + allocate a qc and the scmd is translated into the qc. SCSI + midlayer's completion notification function pointer is stored + into qc->scsidone. + </para> + <para> + qc->complete_fn() callback is used for completion + notification. ATA commands use ata_scsi_qc_complete() while + ATAPI commands use atapi_qc_complete(). Both functions end up + calling qc->scsidone to notify upper layer when the qc is + finished. After translation is completed, the qc is issued + with ata_qc_issue(). + </para> + <para> + Note that SCSI midlayer invokes hostt->queuecommand while + holding host_set lock, so all above occur while holding + host_set lock. + </para> + </listitem> + </varlistentry> + + </variablelist> + </sect1> + + <sect1><title>How commands are processed</title> + <para> + Depending on which protocol and which controller are used, + commands are processed differently. For the purpose of + discussion, a controller which uses taskfile interface and all + standard callbacks is assumed. + </para> + <para> + Currently 6 ATA command protocols are used. They can be + sorted into the following four categories according to how + they are processed. + </para> + + <variablelist> + <varlistentry><term>ATA NO DATA or DMA</term> + <listitem> + <para> + ATA_PROT_NODATA and ATA_PROT_DMA fall into this category. + These types of commands don't require any software + intervention once issued. Device will raise interrupt on + completion. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATA PIO</term> + <listitem> + <para> + ATA_PROT_PIO is in this category. libata currently + implements PIO with polling. ATA_NIEN bit is set to turn + off interrupt and pio_task on ata_wq performs polling and + IO. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATAPI NODATA or DMA</term> + <listitem> + <para> + ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this + category. packet_task is used to poll BSY bit after + issuing PACKET command. Once BSY is turned off by the + device, packet_task transfers CDB and hands off processing + to interrupt handler. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATAPI PIO</term> + <listitem> + <para> + ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set + and, as in ATAPI NODATA or DMA, packet_task submits cdb. + However, after submitting cdb, further processing (data + transfer) is handed off to pio_task. + </para> + </listitem> + </varlistentry> + </variablelist> + </sect1> + + <sect1><title>How commands are completed</title> + <para> + Once issued, all qc's are either completed with + ata_qc_complete() or time out. For commands which are handled + by interrupts, ata_host_intr() invokes ata_qc_complete(), and, + for PIO tasks, pio_task invokes ata_qc_complete(). In error + cases, packet_task may also complete commands. + </para> + <para> + ata_qc_complete() does the following. + </para> + + <orderedlist> + + <listitem> + <para> + DMA memory is unmapped. + </para> + </listitem> + + <listitem> + <para> + ATA_QCFLAG_ACTIVE is clared from qc->flags. + </para> + </listitem> + + <listitem> + <para> + qc->complete_fn() callback is invoked. If the return value of + the callback is not zero. Completion is short circuited and + ata_qc_complete() returns. + </para> + </listitem> + + <listitem> + <para> + __ata_qc_complete() is called, which does + <orderedlist> + + <listitem> + <para> + qc->flags is cleared to zero. + </para> + </listitem> + + <listitem> + <para> + ap->active_tag and qc->tag are poisoned. + </para> + </listitem> + + <listitem> + <para> + qc->waiting is claread & completed (in that order). + </para> + </listitem> + + <listitem> + <para> + qc is deallocated by clearing appropriate bit in ap->qactive. + </para> + </listitem> + + </orderedlist> + </para> + </listitem> + + </orderedlist> + + <para> + So, it basically notifies upper layer and deallocates qc. One + exception is short-circuit path in #3 which is used by + atapi_qc_complete(). + </para> + <para> + For all non-ATAPI commands, whether it fails or not, almost + the same code path is taken and very little error handling + takes place. A qc is completed with success status if it + succeeded, with failed status otherwise. + </para> + <para> + However, failed ATAPI commands require more handling as + REQUEST SENSE is needed to acquire sense data. If an ATAPI + command fails, ata_qc_complete() is invoked with error status, + which in turn invokes atapi_qc_complete() via + qc->complete_fn() callback. + </para> + <para> + This makes atapi_qc_complete() set scmd->result to + SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As + the sense data is empty but scmd->result is CHECK CONDITION, + SCSI midlayer will invoke EH for the scmd, and returning 1 + makes ata_qc_complete() to return without deallocating the qc. + This leads us to ata_scsi_error() with partially completed qc. + </para> + + </sect1> + + <sect1><title>ata_scsi_error()</title> + <para> + ata_scsi_error() is the current hostt->eh_strategy_handler() + for libata. As discussed above, this will be entered in two + cases - timeout and ATAPI error completion. This function + calls low level libata driver's eng_timeout() callback, the + standard callback for which is ata_eng_timeout(). It checks + if a qc is active and calls ata_qc_timeout() on the qc if so. + Actual error handling occurs in ata_qc_timeout(). + </para> + <para> + If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and + completes the qc. Note that as we're currently in EH, we + cannot call scsi_done. As described in SCSI EH doc, a + recovered scmd should be either retried with + scsi_queue_insert() or finished with scsi_finish_command(). + Here, we override qc->scsidone with scsi_finish_command() and + calls ata_qc_complete(). + </para> + <para> + If EH is invoked due to a failed ATAPI qc, the qc here is + completed but not deallocated. The purpose of this + half-completion is to use the qc as place holder to make EH + code reach this place. This is a bit hackish, but it works. + </para> + <para> + Once control reaches here, the qc is deallocated by invoking + __ata_qc_complete() explicitly. Then, internal qc for REQUEST + SENSE is issued. Once sense data is acquired, scmd is + finished by directly invoking scsi_finish_command() on the + scmd. Note that as we already have completed and deallocated + the qc which was associated with the scmd, we don't need + to/cannot call ata_qc_complete() again. + </para> + + </sect1> + + <sect1><title>Problems with the current EH</title> + + <itemizedlist> + + <listitem> + <para> + Error representation is too crude. Currently any and all + error conditions are represented with ATA STATUS and ERROR + registers. Errors which aren't ATA device errors are treated + as ATA device errors by setting ATA_ERR bit. Better error + descriptor which can properly represent ATA and other + errors/exceptions is needed. + </para> + </listitem> + + <listitem> + <para> + When handling timeouts, no action is taken to make device + forget about the timed out command and ready for new commands. + </para> + </listitem> + + <listitem> + <para> + EH handling via ata_scsi_error() is not properly protected + from usual command processing. On EH entrance, the device is + not in quiescent state. Timed out commands may succeed or + fail any time. pio_task and atapi_task may still be running. + </para> + </listitem> + + <listitem> + <para> + Too weak error recovery. Devices / controllers causing HSM + mismatch errors and other errors quite often require reset to + return to known state. Also, advanced error handling is + necessary to support features like NCQ and hotplug. + </para> + </listitem> + + <listitem> + <para> + ATA errors are directly handled in the interrupt handler and + PIO errors in pio_task. This is problematic for advanced + error handling for the following reasons. + </para> + <para> + First, advanced error handling often requires context and + internal qc execution. + </para> + <para> + Second, even a simple failure (say, CRC error) needs + information gathering and could trigger complex error handling + (say, resetting & reconfiguring). Having multiple code + paths to gather information, enter EH and trigger actions + makes life painful. + </para> + <para> + Third, scattered EH code makes implementing low level drivers + difficult. Low level drivers override libata callbacks. If + EH is scattered over several places, each affected callbacks + should perform its part of error handling. This can be error + prone and painful. + </para> + </listitem> + + </itemizedlist> + </sect1> + </chapter> + <chapter id="libataExt"> <title>libata Library</title> !Edrivers/scsi/libata-core.c @@ -431,6 +787,722 @@ and other resources, etc. !Idrivers/scsi/libata-scsi.c </chapter> + <chapter id="ataExceptions"> + <title>ATA errors & exceptions</title> + + <para> + This chapter tries to identify what error/exception conditions exist + for ATA/ATAPI devices and describe how they should be handled in + implementation-neutral way. + </para> + + <para> + The term 'error' is used to describe conditions where either an + explicit error condition is reported from device or a command has + timed out. + </para> + + <para> + The term 'exception' is either used to describe exceptional + conditions which are not errors (say, power or hotplug events), or + to describe both errors and non-error exceptional conditions. Where + explicit distinction between error and exception is necessary, the + term 'non-error exception' is used. + </para> + + <sect1 id="excat"> + <title>Exception categories</title> + <para> + Exceptions are described primarily with respect to legacy + taskfile + bus master IDE interface. If a controller provides + other better mechanism for error reporting, mapping those into + categories described below shouldn't be difficult. + </para> + + <para> + In the following sections, two recovery actions - reset and + reconfiguring transport - are mentioned. These are described + further in <xref linkend="exrec"/>. + </para> + + <sect2 id="excatHSMviolation"> + <title>HSM violation</title> + <para> + This error is indicated when STATUS value doesn't match HSM + requirement during issuing or excution any ATA/ATAPI command. + </para> + + <itemizedlist> + <title>Examples</title> + + <listitem> + <para> + ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying + to issue a command. + </para> + </listitem> + + <listitem> + <para> + !BSY && !DRQ during PIO data transfer. + </para> + </listitem> + + <listitem> + <para> + DRQ on command completion. + </para> + </listitem> + + <listitem> + <para> + !BSY && ERR after CDB tranfer starts but before the + last byte of CDB is transferred. ATA/ATAPI standard states + that "The device shall not terminate the PACKET command + with an error before the last byte of the command packet has + been written" in the error outputs description of PACKET + command and the state diagram doesn't include such + transitions. + </para> + </listitem> + + </itemizedlist> + + <para> + In these cases, HSM is violated and not much information + regarding the error can be acquired from STATUS or ERROR + register. IOW, this error can be anything - driver bug, + faulty device, controller and/or cable. + </para> + + <para> + As HSM is violated, reset is necessary to restore known state. + Reconfiguring transport for lower speed might be helpful too + as transmission errors sometimes cause this kind of errors. + </para> + </sect2> + + <sect2 id="excatDevErr"> + <title>ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)</title> + + <para> + These are errors detected and reported by ATA/ATAPI devices + indicating device problems. For this type of errors, STATUS + and ERROR register values are valid and describe error + condition. Note that some of ATA bus errors are detected by + ATA/ATAPI devices and reported using the same mechanism as + device errors. Those cases are described later in this + section. + </para> + + <para> + For ATA commands, this type of errors are indicated by !BSY + && ERR during command execution and on completion. + </para> + + <para>For ATAPI commands,</para> + + <itemizedlist> + + <listitem> + <para> + !BSY && ERR && ABRT right after issuing PACKET + indicates that PACKET command is not supported and falls in + this category. + </para> + </listitem> + + <listitem> + <para> + !BSY && ERR(==CHK) && !ABRT after the last + byte of CDB is transferred indicates CHECK CONDITION and + doesn't fall in this category. + </para> + </listitem> + + <listitem> + <para> + !BSY && ERR(==CHK) && ABRT after the last byte + of CDB is transferred *probably* indicates CHECK CONDITION and + doesn't fall in this category. + </para> + </listitem> + + </itemizedlist> + + <para> + Of errors detected as above, the followings are not ATA/ATAPI + device errors but ATA bus errors and should be handled + according to <xref linkend="excatATAbusErr"/>. + </para> + + <variablelist> + + <varlistentry> + <term>CRC error during data transfer</term> + <listitem> + <para> + This is indicated by ICRC bit in the ERROR register and + means that corruption occurred during data transfer. Upto + ATA/ATAPI-7, the standard specifies that this bit is only + applicable to UDMA transfers but ATA/ATAPI-8 draft revision + 1f says that the bit may be applicable to multiword DMA and + PIO. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term>ABRT error during data transfer or on completion</term> + <listitem> + <para> + Upto ATA/ATAPI-7, the standard specifies that ABRT could be + set on ICRC errors and on cases where a device is not able + to complete a command. Combined with the fact that MWDMA + and PIO transfer errors aren't allowed to use ICRC bit upto + ATA/ATAPI-7, it seems to imply that ABRT bit alone could + indicate tranfer errors. + </para> + <para> + However, ATA/ATAPI-8 draft revision 1f removes the part + that ICRC errors can turn on ABRT. So, this is kind of + gray area. Some heuristics are needed here. + </para> + </listitem> + </varlistentry> + + </variablelist> + + <para> + ATA/ATAPI device errors can be further categorized as follows. + </para> + + <variablelist> + + <varlistentry> + <term>Media errors</term> + <listitem> + <para> + This is indicated by UNC bit in the ERROR register. ATA + devices reports UNC error only after certain number of + retries cannot recover the data, so there's nothing much + else to do other than notifying upper layer. + </para> + <para> + READ and WRITE commands report CHS or LBA of the first + failed sector but ATA/ATAPI standard specifies that the + amount of transferred data on error completion is + indeterminate, so we cannot assume that sectors preceding + the failed sector have been transferred and thus cannot + complete those sectors successfully as SCSI does. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term>Media changed / media change requested error</term> + <listitem> + <para> + <<TODO: fill here>> + </para> + </listitem> + </varlistentry> + + <varlistentry><term>Address error</term> + <listitem> + <para> + This is indicated by IDNF bit in the ERROR register. + Report to upper layer. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>Other errors</term> + <listitem> + <para> + This can be invalid command or parameter indicated by ABRT + ERROR bit or some other error condition. Note that ABRT + bit can indicate a lot of things including ICRC and Address + errors. Heuristics needed. + </para> + </listitem> + </varlistentry> + + </variablelist> + + <para> + Depending on commands, not all STATUS/ERROR bits are + applicable. These non-applicable bits are marked with + "na" in the output descriptions but upto ATA/ATAPI-7 + no definition of "na" can be found. However, + ATA/ATAPI-8 draft revision 1f describes "N/A" as + follows. + </para> + + <blockquote> + <variablelist> + <varlistentry><term>3.2.3.3a N/A</term> + <listitem> + <para> + A keyword the indicates a field has no defined value in + this standard and should not be checked by the host or + device. N/A fields should be cleared to zero. + </para> + </listitem> + </varlistentry> + </variablelist> + </blockquote> + + <para> + So, it seems reasonable to assume that "na" bits are + cleared to zero by devices and thus need no explicit masking. + </para> + + </sect2> + + <sect2 id="excatATAPIcc"> + <title>ATAPI device CHECK CONDITION</title> + + <para> + ATAPI device CHECK CONDITION error is indicated by set CHK bit + (ERR bit) in the STATUS register after the last byte of CDB is + transferred for a PACKET command. For this kind of errors, + sense data should be acquired to gather information regarding + the errors. REQUEST SENSE packet command should be used to + acquire sense data. + </para> + + <para> + Once sense data is acquired, this type of errors can be + handled similary to other SCSI errors. Note that sense data + may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR + && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such + cases, the error should be considered as an ATA bus error and + handled according to <xref linkend="excatATAbusErr"/>. + </para> + + </sect2> + + <sect2 id="excatNCQerr"> + <title>ATA device error (NCQ)</title> + + <para> + NCQ command error is indicated by cleared BSY and set ERR bit + during NCQ command phase (one or more NCQ commands + outstanding). Although STATUS and ERROR registers will + contain valid values describing the error, READ LOG EXT is + required to clear the error condition, determine which command + has failed and acquire more information. + </para> + + <para> + READ LOG EXT Log Page 10h reports which tag has failed and + taskfile register values describing the error. With this + information the failed command can be handled as a normal ATA + command error as in <xref linkend="excatDevErr"/> and all + other in-flight commands must be retried. Note that this + retry should not be counted - it's likely that commands + retried this way would have completed normally if it were not + for the failed command. + </para> + + <para> + Note that ATA bus errors can be reported as ATA device NCQ + errors. This should be handled as described in <xref + linkend="excatATAbusErr"/>. + </para> + + <para> + If READ LOG EXT Log Page 10h fails or reports NQ, we're + thoroughly screwed. This condition should be treated + according to <xref linkend="excatHSMviolation"/>. + </para> + + </sect2> + + <sect2 id="excatATAbusErr"> + <title>ATA bus error</title> + + <para> + ATA bus error means that data corruption occurred during + transmission over ATA bus (SATA or PATA). This type of errors + can be indicated by + </para> + + <itemizedlist> + + <listitem> + <para> + ICRC or ABRT error as described in <xref linkend="excatDevErr"/>. + </para> + </listitem> + + <listitem> + <para> + Controller-specific error completion with error information + indicating transmission error. + </para> + </listitem> + + <listitem> + <para> + On some controllers, command timeout. In this case, there may + be a mechanism to determine that the timeout is due to + transmission error. + </para> + </listitem> + + <listitem> + <para> + Unknown/random errors, timeouts and all sorts of weirdities. + </para> + </listitem> + + </itemizedlist> + + <para> + As described above, transmission errors can cause wide variety + of symptoms ranging from device ICRC error to random device + lockup, and, for many cases, there is no way to tell if an + error condition is due to transmission error or not; + therefore, it's necessary to employ some kind of heuristic + when dealing with errors and timeouts. For example, + encountering repetitive ABRT errors for known supported + command is likely to indicate ATA bus error. + </para> + + <para> + Once it's determined that ATA bus errors have possibly + occurred, lowering ATA bus transmission speed is one of + actions which may alleviate the problem. See <xref + linkend="exrecReconf"/> for more information. + </para> + + </sect2> + + <sect2 id="excatPCIbusErr"> + <title>PCI bus error</title> + + <para> + Data corruption or other failures during transmission over PCI + (or other system bus). For standard BMDMA, this is indicated + by Error bit in the BMDMA Status register. This type of + errors must be logged as it indicates something is very wrong + with the system. Resetting host controller is recommended. + </para> + + </sect2> + + <sect2 id="excatLateCompletion"> + <title>Late completion</title> + + <para> + This occurs when timeout occurs and the timeout handler finds + out that the timed out command has completed successfully or + with error. This is usually caused by lost interrupts. This + type of errors must be logged. Resetting host controller is + recommended. + </para> + + </sect2> + + <sect2 id="excatUnknown"> + <title>Unknown error (timeout)</title> + + <para> + This is when timeout occurs and the command is still + processing or the host and device are in unknown state. When + this occurs, HSM could be in any valid or invalid state. To + bring the device to known state and make it forget about the + timed out command, resetting is necessary. The timed out + command may be retried. + </para> + + <para> + Timeouts can also be caused by transmission errors. Refer to + <xref linkend="excatATAbusErr"/> for more details. + </para> + + </sect2> + + <sect2 id="excatHoplugPM"> + <title>Hotplug and power management exceptions</title> + + <para> + <<TODO: fill here>> + </para> + + </sect2> + + </sect1> + + <sect1 id="exrec"> + <title>EH recovery actions</title> + + <para> + This section discusses several important recovery actions. + </para> + + <sect2 id="exrecClr"> + <title>Clearing error condition</title> + + <para> + Many controllers require its error registers to be cleared by + error handler. Different controllers may have different + requirements. + </para> + + <para> + For SATA, it's strongly recommended to clear at least SError + register during error handling. + </para> + </sect2> + + <sect2 id="exrecRst"> + <title>Reset</title> + + <para> + During EH, resetting is necessary in the following cases. + </para> + + <itemizedlist> + + <listitem> + <para> + HSM is in unknown or invalid state + </para> + </listitem> + + <listitem> + <para> + HBA is in unknown or invalid state + </para> + </listitem> + + <listitem> + <para> + EH needs to make HBA/device forget about in-flight commands + </para> + </listitem> + + <listitem> + <para> + HBA/device behaves weirdly + </para> + </listitem> + + </itemizedlist> + + <para> + Resetting during EH might be a good idea regardless of error + condition to improve EH robustness. Whether to reset both or + either one of HBA and device depends on situation but the + following scheme is recommended. + </para> + + <itemizedlist> + + <listitem> + <para> + When it's known that HBA is in ready state but ATA/ATAPI + device in in unknown state, reset only device. + </para> + </listitem> + + <listitem> + <para> + If HBA is in unknown state, reset both HBA and device. + </para> + </listitem> + + </itemizedlist> + + <para> + HBA resetting is implementation specific. For a controller + complying to taskfile/BMDMA PCI IDE, stopping active DMA + transaction may be sufficient iff BMDMA state is the only HBA + context. But even mostly taskfile/BMDMA PCI IDE complying + controllers may have implementation specific requirements and + mechanism to reset themselves. This must be addressed by + specific drivers. + </para> + + <para> + OTOH, ATA/ATAPI standard describes in detail ways to reset + ATA/ATAPI devices. + </para> + + <variablelist> + + <varlistentry><term>PATA hardware reset</term> + <listitem> + <para> + This is hardware initiated device reset signalled with + asserted PATA RESET- signal. There is no standard way to + initiate hardware reset from software although some + hardware provides registers that allow driver to directly + tweak the RESET- signal. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>Software reset</term> + <listitem> + <para> + This is achieved by turning CONTROL SRST bit on for at + least 5us. Both PATA and SATA support it but, in case of + SATA, this may require controller-specific support as the + second Register FIS to clear SRST should be transmitted + while BSY bit is still set. Note that on PATA, this resets + both master and slave devices on a channel. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>EXECUTE DEVICE DIAGNOSTIC command</term> + <listitem> + <para> + Although ATA/ATAPI standard doesn't describe exactly, EDD + implies some level of resetting, possibly similar level + with software reset. Host-side EDD protocol can be handled + with normal command processing and most SATA controllers + should be able to handle EDD's just like other commands. + As in software reset, EDD affects both devices on a PATA + bus. + </para> + <para> + Although EDD does reset devices, this doesn't suit error + handling as EDD cannot be issued while BSY is set and it's + unclear how it will act when device is in unknown/weird + state. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATAPI DEVICE RESET command</term> + <listitem> + <para> + This is very similar to software reset except that reset + can be restricted to the selected device without affecting + the other device sharing the cable. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>SATA phy reset</term> + <listitem> + <para> + This is the preferred way of resetting a SATA device. In + effect, it's identical to PATA hardware reset. Note that + this can be done with the standard SCR Control register. + As such, it's usually easier to implement than software + reset. + </para> + </listitem> + </varlistentry> + + </variablelist> + + <para> + One more thing to consider when resetting devices is that + resetting clears certain configuration parameters and they + need to be set to their previous or newly adjusted values + after reset. + </para> + + <para> + Parameters affected are. + </para> + + <itemizedlist> + + <listitem> + <para> + CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used) + </para> + </listitem> + + <listitem> + <para> + Parameters set with SET FEATURES including transfer mode setting + </para> + </listitem> + + <listitem> + <para> + Block count set with SET MULTIPLE MODE + </para> + </listitem> + + <listitem> + <para> + Other parameters (SET MAX, MEDIA LOCK...) + </para> + </listitem> + + </itemizedlist> + + <para> + ATA/ATAPI standard specifies that some parameters must be + maintained across hardware or software reset, but doesn't + strictly specify all of them. Always reconfiguring needed + parameters after reset is required for robustness. Note that + this also applies when resuming from deep sleep (power-off). + </para> + + <para> + Also, ATA/ATAPI standard requires that IDENTIFY DEVICE / + IDENTIFY PACKET DEVICE is issued after any configuration + parameter is updated or a hardware reset and the result used + for further operation. OS driver is required to implement + revalidation mechanism to support this. + </para> + + </sect2> + + <sect2 id="exrecReconf"> + <title>Reconfigure transport</title> + + <para> + For both PATA and SATA, a lot of corners are cut for cheap + connectors, cables or controllers and it's quite common to see + high transmission error rate. This can be mitigated by + lowering transmission speed. + </para> + + <para> + The following is a possible scheme Jeff Garzik suggested. + </para> + + <blockquote> + <para> + If more than $N (3?) transmission errors happen in 15 minutes, + </para> + <itemizedlist> + <listitem> + <para> + if SATA, decrease SATA PHY speed. if speed cannot be decreased, + </para> + </listitem> + <listitem> + <para> + decrease UDMA xfer speed. if at UDMA0, switch to PIO4, + </para> + </listitem> + <listitem> + <para> + decrease PIO xfer speed. if at PIO3, complain, but continue + </para> + </listitem> + </itemizedlist> + </blockquote> + + </sect2> + + </sect1> + + </chapter> + <chapter id="PiixInt"> <title>ata_piix Internals</title> !Idrivers/scsi/ata_piix.c diff --git a/Documentation/DocBook/rapidio.tmpl b/Documentation/DocBook/rapidio.tmpl new file mode 100644 index 0000000..1becf27 --- /dev/null +++ b/Documentation/DocBook/rapidio.tmpl @@ -0,0 +1,160 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [ + <!ENTITY rapidio SYSTEM "rapidio.xml"> + ]> + +<book id="RapidIO-Guide"> + <bookinfo> + <title>RapidIO Subsystem Guide</title> + + <authorgroup> + <author> + <firstname>Matt</firstname> + <surname>Porter</surname> + <affiliation> + <address> + <email>mporter@kernel.crashing.org</email> + <email>mporter@mvista.com</email> + </address> + </affiliation> + </author> + </authorgroup> + + <copyright> + <year>2005</year> + <holder>MontaVista Software, Inc.</holder> + </copyright> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="intro"> + <title>Introduction</title> + <para> + RapidIO is a high speed switched fabric interconnect with + features aimed at the embedded market. RapidIO provides + support for memory-mapped I/O as well as message-based + transactions over the switched fabric network. RapidIO has + a standardized discovery mechanism not unlike the PCI bus + standard that allows simple detection of devices in a + network. + </para> + <para> + This documentation is provided for developers intending + to support RapidIO on new architectures, write new drivers, + or to understand the subsystem internals. + </para> + </chapter> + + <chapter id="bugs"> + <title>Known Bugs and Limitations</title> + + <sect1> + <title>Bugs</title> + <para>None. ;)</para> + </sect1> + <sect1> + <title>Limitations</title> + <para> + <orderedlist> + <listitem><para>Access/management of RapidIO memory regions is not supported</para></listitem> + <listitem><para>Multiple host enumeration is not supported</para></listitem> + </orderedlist> + </para> + </sect1> + </chapter> + + <chapter id="drivers"> + <title>RapidIO driver interface</title> + <para> + Drivers are provided a set of calls in order + to interface with the subsystem to gather info + on devices, request/map memory region resources, + and manage mailboxes/doorbells. + </para> + <sect1> + <title>Functions</title> +!Iinclude/linux/rio_drv.h +!Edrivers/rapidio/rio-driver.c +!Edrivers/rapidio/rio.c + </sect1> + </chapter> + + <chapter id="internals"> + <title>Internals</title> + + <para> + This chapter contains the autogenerated documentation of the RapidIO + subsystem. + </para> + + <sect1><title>Structures</title> +!Iinclude/linux/rio.h + </sect1> + <sect1><title>Enumeration and Discovery</title> +!Idrivers/rapidio/rio-scan.c + </sect1> + <sect1><title>Driver functionality</title> +!Idrivers/rapidio/rio.c +!Idrivers/rapidio/rio-access.c + </sect1> + <sect1><title>Device model support</title> +!Idrivers/rapidio/rio-driver.c + </sect1> + <sect1><title>Sysfs support</title> +!Idrivers/rapidio/rio-sysfs.c + </sect1> + <sect1><title>PPC32 support</title> +!Iarch/ppc/kernel/rio.c +!Earch/ppc/syslib/ppc85xx_rio.c +!Iarch/ppc/syslib/ppc85xx_rio.c + </sect1> + </chapter> + + <chapter id="credits"> + <title>Credits</title> + <para> + The following people have contributed to the RapidIO + subsystem directly or indirectly: + <orderedlist> + <listitem><para>Matt Porter<email>mporter@kernel.crashing.org</email></para></listitem> + <listitem><para>Randy Vinson<email>rvinson@mvista.com</email></para></listitem> + <listitem><para>Dan Malek<email>dan@embeddedalley.com</email></para></listitem> + </orderedlist> + </para> + <para> + The following people have contributed to this document: + <orderedlist> + <listitem><para>Matt Porter<email>mporter@kernel.crashing.org</email></para></listitem> + </orderedlist> + </para> + </chapter> +</book> diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl index 64be9f7..3ccce88 100644 --- a/Documentation/DocBook/stylesheet.xsl +++ b/Documentation/DocBook/stylesheet.xsl @@ -3,4 +3,5 @@ <param name="chunk.quietly">1</param> <param name="funcsynopsis.style">ansi</param> <param name="funcsynopsis.tabular.threshold">80</param> +<!-- <param name="paper.type">A4</param> --> </stylesheet> diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 705c442..15ce0f2 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -291,7 +291,7 @@ !Edrivers/usb/core/hcd.c !Edrivers/usb/core/hcd-pci.c -!Edrivers/usb/core/buffer.c +!Idrivers/usb/core/buffer.c </chapter> <chapter> diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl index 51f3bfb..008a341 100644 --- a/Documentation/DocBook/writing_usb_driver.tmpl +++ b/Documentation/DocBook/writing_usb_driver.tmpl @@ -345,8 +345,7 @@ if (!retval) { <programlisting> static inline void skel_delete (struct usb_skel *dev) { - if (dev->bulk_in_buffer != NULL) - kfree (dev->bulk_in_buffer); + kfree (dev->bulk_in_buffer); if (dev->bulk_out_buffer != NULL) usb_buffer_free (dev->udev, dev->bulk_out_size, dev->bulk_out_buffer, diff --git a/Documentation/HOWTO b/Documentation/HOWTO new file mode 100644 index 0000000..6c9e746 --- /dev/null +++ b/Documentation/HOWTO @@ -0,0 +1,618 @@ +HOWTO do Linux kernel development +--------------------------------- + +This is the be-all, end-all document on this topic. It contains +instructions on how to become a Linux kernel developer and how to learn +to work with the Linux kernel development community. It tries to not +contain anything related to the technical aspects of kernel programming, +but will help point you in the right direction for that. + +If anything in this document becomes out of date, please send in patches +to the maintainer of this file, who is listed at the bottom of the +document. + + +Introduction +------------ + +So, you want to learn how to become a Linux kernel developer? Or you +have been told by your manager, "Go write a Linux driver for this +device." This document's goal is to teach you everything you need to +know to achieve this by describing the process you need to go through, +and hints on how to work with the community. It will also try to +explain some of the reasons why the community works like it does. + +The kernel is written mostly in C, with some architecture-dependent +parts written in assembly. A good understanding of C is required for +kernel development. Assembly (any architecture) is not required unless +you plan to do low-level development for that architecture. Though they +are not a good substitute for a solid C education and/or years of +experience, the following books are good for, if anything, reference: + - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall] + - "Practical C Programming" by Steve Oualline [O'Reilly] + +The kernel is written using GNU C and the GNU toolchain. While it +adheres to the ISO C89 standard, it uses a number of extensions that are +not featured in the standard. The kernel is a freestanding C +environment, with no reliance on the standard C library, so some +portions of the C standard are not supported. Arbitrary long long +divisions and floating point are not allowed. It can sometimes be +difficult to understand the assumptions the kernel has on the toolchain +and the extensions that it uses, and unfortunately there is no +definitive reference for them. Please check the gcc info pages (`info +gcc`) for some information on them. + +Please remember that you are trying to learn how to work with the +existing development community. It is a diverse group of people, with +high standards for coding, style and procedure. These standards have +been created over time based on what they have found to work best for +such a large and geographically dispersed team. Try to learn as much as +possible about these standards ahead of time, as they are well +documented; do not expect people to adapt to you or your company's way +of doing things. + + +Legal Issues +------------ + +The Linux kernel source code is released under the GPL. Please see the +file, COPYING, in the main directory of the source tree, for details on +the license. If you have further questions about the license, please +contact a lawyer, and do not ask on the Linux kernel mailing list. The +people on the mailing lists are not lawyers, and you should not rely on +their statements on legal matters. + +For common questions and answers about the GPL, please see: + http://www.gnu.org/licenses/gpl-faq.html + + +Documentation +------------ + +The Linux kernel source tree has a large range of documents that are +invaluable for learning how to interact with the kernel community. When +new features are added to the kernel, it is recommended that new +documentation files are also added which explain how to use the feature. +When a kernel change causes the interface that the kernel exposes to +userspace to change, it is recommended that you send the information or +a patch to the manual pages explaining the change to the manual pages +maintainer at mtk-manpages@gmx.net. + +Here is a list of files that are in the kernel source tree that are +required reading: + README + This file gives a short background on the Linux kernel and describes + what is necessary to do to configure and build the kernel. People + who are new to the kernel should start here. + + Documentation/Changes + This file gives a list of the minimum levels of various software + packages that are necessary to build and run the kernel + successfully. + + Documentation/CodingStyle + This describes the Linux kernel coding style, and some of the + rationale behind it. All new code is expected to follow the + guidelines in this document. Most maintainers will only accept + patches if these rules are followed, and many people will only + review code if it is in the proper style. + + Documentation/SubmittingPatches + Documentation/SubmittingDrivers + These files describe in explicit detail how to successfully create + and send a patch, including (but not limited to): + - Email contents + - Email format + - Who to send it to + Following these rules will not guarantee success (as all patches are + subject to scrutiny for content and style), but not following them + will almost always prevent it. + + Other excellent descriptions of how to create patches properly are: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + "Linux kernel patch submission format" + http://linux.yyz.us/patch-format.html + + Documentation/stable_api_nonsense.txt + This file describes the rationale behind the conscious decision to + not have a stable API within the kernel, including things like: + - Subsystem shim-layers (for compatibility?) + - Driver portability between Operating Systems. + - Mitigating rapid change within the kernel source tree (or + preventing rapid change) + This document is crucial for understanding the Linux development + philosophy and is very important for people moving to Linux from + development on other Operating Systems. + + Documentation/SecurityBugs + If you feel you have found a security problem in the Linux kernel, + please follow the steps in this document to help notify the kernel + developers, and help solve the issue. + + Documentation/ManagementStyle + This document describes how Linux kernel maintainers operate and the + shared ethos behind their methodologies. This is important reading + for anyone new to kernel development (or anyone simply curious about + it), as it resolves a lot of common misconceptions and confusion + about the unique behavior of kernel maintainers. + + Documentation/stable_kernel_rules.txt + This file describes the rules on how the stable kernel releases + happen, and what to do if you want to get a change into one of these + releases. + + Documentation/kernel-docs.txt + A list of external documentation that pertains to kernel + development. Please consult this list if you do not find what you + are looking for within the in-kernel documentation. + + Documentation/applying-patches.txt + A good introduction describing exactly what a patch is and how to + apply it to the different development branches of the kernel. + +The kernel also has a large number of documents that can be +automatically generated from the source code itself. This includes a +full description of the in-kernel API, and rules on how to handle +locking properly. The documents will be created in the +Documentation/DocBook/ directory and can be generated as PDF, +Postscript, HTML, and man pages by running: + make pdfdocs + make psdocs + make htmldocs + make mandocs +respectively from the main kernel source directory. + + +Becoming A Kernel Developer +--------------------------- + +If you do not know anything about Linux kernel development, you should +look at the Linux KernelNewbies project: + http://kernelnewbies.org +It consists of a helpful mailing list where you can ask almost any type +of basic kernel development question (make sure to search the archives +first, before asking something that has already been answered in the +past.) It also has an IRC channel that you can use to ask questions in +real-time, and a lot of helpful documentation that is useful for +learning about Linux kernel development. + +The website has basic information about code organization, subsystems, +and current projects (both in-tree and out-of-tree). It also describes +some basic logistical information, like how to compile a kernel and +apply a patch. + +If you do not know where you want to start, but you want to look for +some task to start doing to join into the kernel development community, +go to the Linux Kernel Janitor's project: + http://janitor.kernelnewbies.org/ +It is a great place to start. It describes a list of relatively simple +problems that need to be cleaned up and fixed within the Linux kernel +source tree. Working with the developers in charge of this project, you +will learn the basics of getting your patch into the Linux kernel tree, +and possibly be pointed in the direction of what to go work on next, if +you do not already have an idea. + +If you already have a chunk of code that you want to put into the kernel +tree, but need some help getting it in the proper form, the +kernel-mentors project was created to help you out with this. It is a +mailing list, and can be found at: + http://selenic.com/mailman/listinfo/kernel-mentors + +Before making any actual modifications to the Linux kernel code, it is +imperative to understand how the code in question works. For this +purpose, nothing is better than reading through it directly (most tricky +bits are commented well), perhaps even with the help of specialized +tools. One such tool that is particularly recommended is the Linux +Cross-Reference project, which is able to present source code in a +self-referential, indexed webpage format. An excellent up-to-date +repository of the kernel code may be found at: + http://sosdg.org/~coywolf/lxr/ + + +The development process +----------------------- + +Linux kernel development process currently consists of a few different +main kernel "branches" and lots of different subsystem-specific kernel +branches. These different branches are: + - main 2.6.x kernel tree + - 2.6.x.y -stable kernel tree + - 2.6.x -git kernel patches + - 2.6.x -mm kernel patches + - subsystem specific kernel trees and patches + +2.6.x kernel tree +----------------- +2.6.x kernels are maintained by Linus Torvalds, and can be found on +kernel.org in the pub/linux/kernel/v2.6/ directory. Its development +process is as follows: + - As soon as a new kernel is released a two weeks window is open, + during this period of time maintainers can submit big diffs to + Linus, usually the patches that have already been included in the + -mm kernel for a few weeks. The preferred way to submit big changes + is using git (the kernel's source management tool, more information + can be found at http://git.or.cz/) but plain patches are also just + fine. + - After two weeks a -rc1 kernel is released it is now possible to push + only patches that do not include new features that could affect the + stability of the whole kernel. Please note that a whole new driver + (or filesystem) might be accepted after -rc1 because there is no + risk of causing regressions with such a change as long as the change + is self-contained and does not affect areas outside of the code that + is being added. git can be used to send patches to Linus after -rc1 + is released, but the patches need to also be sent to a public + mailing list for review. + - A new -rc is released whenever Linus deems the current git tree to + be in a reasonably sane state adequate for testing. The goal is to + release a new -rc kernel every week. + - Process continues until the kernel is considered "ready", the + process should last around 6 weeks. + +It is worth mentioning what Andrew Morton wrote on the linux-kernel +mailing list about kernel releases: + "Nobody knows when a kernel will be released, because it's + released according to perceived bug status, not according to a + preconceived timeline." + +2.6.x.y -stable kernel tree +--------------------------- +Kernels with 4 digit versions are -stable kernels. They contain +relatively small and critical fixes for security problems or significant +regressions discovered in a given 2.6.x kernel. + +This is the recommended branch for users who want the most recent stable +kernel and are not interested in helping test development/experimental +versions. + +If no 2.6.x.y kernel is available, then the highest numbered 2.6.x +kernel is the current stable kernel. + +2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are +released almost every other week. + +The file Documentation/stable_kernel_rules.txt in the kernel tree +documents what kinds of changes are acceptable for the -stable tree, and +how the release process works. + +2.6.x -git patches +------------------ +These are daily snapshots of Linus' kernel tree which are managed in a +git repository (hence the name.) These patches are usually released +daily and represent the current state of Linus' tree. They are more +experimental than -rc kernels since they are generated automatically +without even a cursory glance to see if they are sane. + +2.6.x -mm kernel patches +------------------------ +These are experimental kernel patches released by Andrew Morton. Andrew +takes all of the different subsystem kernel trees and patches and mushes +them together, along with a lot of patches that have been plucked from +the linux-kernel mailing list. This tree serves as a proving ground for +new features and patches. Once a patch has proved its worth in -mm for +a while Andrew or the subsystem maintainer pushes it on to Linus for +inclusion in mainline. + +It is heavily encouraged that all new patches get tested in the -mm tree +before they are sent to Linus for inclusion in the main kernel tree. + +These kernels are not appropriate for use on systems that are supposed +to be stable and they are more risky to run than any of the other +branches. + +If you wish to help out with the kernel development process, please test +and use these kernel releases and provide feedback to the linux-kernel +mailing list if you have any problems, and if everything works properly. + +In addition to all the other experimental patches, these kernels usually +also contain any changes in the mainline -git kernels available at the +time of release. + +The -mm kernels are not released on a fixed schedule, but usually a few +-mm kernels are released in between each -rc kernel (1 to 3 is common). + +Subsystem Specific kernel trees and patches +------------------------------------------- +A number of the different kernel subsystem developers expose their +development trees so that others can see what is happening in the +different areas of the kernel. These trees are pulled into the -mm +kernel releases as described above. + +Here is a list of some of the different kernel trees available: + git trees: + - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org> + kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git + + - ACPI development tree, Len Brown <len.brown@intel.com> + kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git + + - Block development tree, Jens Axboe <axboe@suse.de> + kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git + + - DRM development tree, Dave Airlie <airlied@linux.ie> + kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git + + - ia64 development tree, Tony Luck <tony.luck@intel.com> + kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git + + - ieee1394 development tree, Jody McIntyre <scjody@modernduck.com> + kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git + + - infiniband, Roland Dreier <rolandd@cisco.com> + kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git + + - libata, Jeff Garzik <jgarzik@pobox.com> + kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git + + - network drivers, Jeff Garzik <jgarzik@pobox.com> + kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git + + - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net> + kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git + + - SCSI, James Bottomley <James.Bottomley@SteelEye.com> + kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git + + Other git kernel trees can be found listed at http://kernel.org/git + + quilt trees: + - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de> + kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ + + +Bug Reporting +------------- + +bugzilla.kernel.org is where the Linux kernel developers track kernel +bugs. Users are encouraged to report all bugs that they find in this +tool. For details on how to use the kernel bugzilla, please see: + http://test.kernel.org/bugzilla/faq.html + +The file REPORTING-BUGS in the main kernel source directory has a good +template for how to report a possible kernel bug, and details what kind +of information is needed by the kernel developers to help track down the +problem. + + +Mailing lists +------------- + +As some of the above documents describe, the majority of the core kernel +developers participate on the Linux Kernel Mailing list. Details on how +to subscribe and unsubscribe from the list can be found at: + http://vger.kernel.org/vger-lists.html#linux-kernel +There are archives of the mailing list on the web in many different +places. Use a search engine to find these archives. For example: + http://dir.gmane.org/gmane.linux.kernel +It is highly recommended that you search the archives about the topic +you want to bring up, before you post it to the list. A lot of things +already discussed in detail are only recorded at the mailing list +archives. + +Most of the individual kernel subsystems also have their own separate +mailing list where they do their development efforts. See the +MAINTAINERS file for a list of what these lists are for the different +groups. + +Many of the lists are hosted on kernel.org. Information on them can be +found at: + http://vger.kernel.org/vger-lists.html + +Please remember to follow good behavioral habits when using the lists. +Though a bit cheesy, the following URL has some simple guidelines for +interacting with the list (or any list): + http://www.albion.com/netiquette/ + +If multiple people respond to your mail, the CC: list of recipients may +get pretty large. Don't remove anybody from the CC: list without a good +reason, or don't reply only to the list address. Get used to receiving the +mail twice, one from the sender and the one from the list, and don't try +to tune that by adding fancy mail-headers, people will not like it. + +Remember to keep the context and the attribution of your replies intact, +keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and +add your statements between the individual quoted sections instead of +writing at the top of the mail. + +If you add patches to your mail, make sure they are plain readable text +as stated in Documentation/SubmittingPatches. Kernel developers don't +want to deal with attachments or compressed patches; they may want +to comment on individual lines of your patch, which works only that way. +Make sure you use a mail program that does not mangle spaces and tab +characters. A good first test is to send the mail to yourself and try +to apply your own patch by yourself. If that doesn't work, get your +mail program fixed or change it until it works. + +Above all, please remember to show respect to other subscribers. + + +Working with the community +-------------------------- + +The goal of the kernel community is to provide the best possible kernel +there is. When you submit a patch for acceptance, it will be reviewed +on its technical merits and those alone. So, what should you be +expecting? + - criticism + - comments + - requests for change + - requests for justification + - silence + +Remember, this is part of getting your patch into the kernel. You have +to be able to take criticism and comments about your patches, evaluate +them at a technical level and either rework your patches or provide +clear and concise reasoning as to why those changes should not be made. +If there are no responses to your posting, wait a few days and try +again, sometimes things get lost in the huge volume. + +What should you not do? + - expect your patch to be accepted without question + - become defensive + - ignore comments + - resubmit the patch without making any of the requested changes + +In a community that is looking for the best technical solution possible, +there will always be differing opinions on how beneficial a patch is. +You have to be cooperative, and willing to adapt your idea to fit within +the kernel. Or at least be willing to prove your idea is worth it. +Remember, being wrong is acceptable as long as you are willing to work +toward a solution that is right. + +It is normal that the answers to your first patch might simply be a list +of a dozen things you should correct. This does _not_ imply that your +patch will not be accepted, and it is _not_ meant against you +personally. Simply correct all issues raised against your patch and +resend it. + + +Differences between the kernel community and corporate structures +----------------------------------------------------------------- + +The kernel community works differently than most traditional corporate +development environments. Here are a list of things that you can try to +do to try to avoid problems: + Good things to say regarding your proposed changes: + - "This solves multiple problems." + - "This deletes 2000 lines of code." + - "Here is a patch that explains what I am trying to describe." + - "I tested it on 5 different architectures..." + - "Here is a series of small patches that..." + - "This increases performance on typical machines..." + + Bad things you should avoid saying: + - "We did it this way in AIX/ptx/Solaris, so therefore it must be + good..." + - "I've being doing this for 20 years, so..." + - "This is required for my company to make money" + - "This is for our Enterprise product line." + - "Here is my 1000 page design document that describes my idea" + - "I've been working on this for 6 months..." + - "Here's a 5000 line patch that..." + - "I rewrote all of the current mess, and here it is..." + - "I have a deadline, and this patch needs to be applied now." + +Another way the kernel community is different than most traditional +software engineering work environments is the faceless nature of +interaction. One benefit of using email and irc as the primary forms of +communication is the lack of discrimination based on gender or race. +The Linux kernel work environment is accepting of women and minorities +because all you are is an email address. The international aspect also +helps to level the playing field because you can't guess gender based on +a person's name. A man may be named Andrea and a woman may be named Pat. +Most women who have worked in the Linux kernel and have expressed an +opinion have had positive experiences. + +The language barrier can cause problems for some people who are not +comfortable with English. A good grasp of the language can be needed in +order to get ideas across properly on mailing lists, so it is +recommended that you check your emails to make sure they make sense in +English before sending them. + + +Break up your changes +--------------------- + +The Linux kernel community does not gladly accept large chunks of code +dropped on it all at once. The changes need to be properly introduced, +discussed, and broken up into tiny, individual portions. This is almost +the exact opposite of what companies are used to doing. Your proposal +should also be introduced very early in the development process, so that +you can receive feedback on what you are doing. It also lets the +community feel that you are working with them, and not simply using them +as a dumping ground for your feature. However, don't send 50 emails at +one time to a mailing list, your patch series should be smaller than +that almost all of the time. + +The reasons for breaking things up are the following: + +1) Small patches increase the likelihood that your patches will be + applied, since they don't take much time or effort to verify for + correctness. A 5 line patch can be applied by a maintainer with + barely a second glance. However, a 500 line patch may take hours to + review for correctness (the time it takes is exponentially + proportional to the size of the patch, or something). + + Small patches also make it very easy to debug when something goes + wrong. It's much easier to back out patches one by one than it is + to dissect a very large patch after it's been applied (and broken + something). + +2) It's important not only to send small patches, but also to rewrite + and simplify (or simply re-order) patches before submitting them. + +Here is an analogy from kernel developer Al Viro: + "Think of a teacher grading homework from a math student. The + teacher does not want to see the student's trials and errors + before they came up with the solution. They want to see the + cleanest, most elegant answer. A good student knows this, and + would never submit her intermediate work before the final + solution." + + The same is true of kernel development. The maintainers and + reviewers do not want to see the thought process behind the + solution to the problem one is solving. They want to see a + simple and elegant solution." + +It may be challenging to keep the balance between presenting an elegant +solution and working together with the community and discussing your +unfinished work. Therefore it is good to get early in the process to +get feedback to improve your work, but also keep your changes in small +chunks that they may get already accepted, even when your whole task is +not ready for inclusion now. + +Also realize that it is not acceptable to send patches for inclusion +that are unfinished and will be "fixed up later." + + +Justify your change +------------------- + +Along with breaking up your patches, it is very important for you to let +the Linux community know why they should add this change. New features +must be justified as being needed and useful. + + +Document your change +-------------------- + +When sending in your patches, pay special attention to what you say in +the text in your email. This information will become the ChangeLog +information for the patch, and will be preserved for everyone to see for +all time. It should describe the patch completely, containing: + - why the change is necessary + - the overall design approach in the patch + - implementation details + - testing results + +For more details on what this should all look like, please see the +ChangeLog section of the document: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + + + + +All of these things are sometimes very hard to do. It can take years to +perfect these practices (if at all). It's a continuous process of +improvement that requires a lot of patience and determination. But +don't give up, it's possible. Many have done it before, and each had to +start exactly where you are now. + + + + +---------- +Thanks to Paolo Ciarrocchi who allowed the "Development Process" section +to be based on text he had written, and to Randy Dunlap and Gerrit +Huizenga for some of the list of things you should and should not say. +Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers, +Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi +Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop, +David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for +their review, comments, and contributions. Without their help, this +document would not have been possible. + + + +Maintainer: Greg Kroah-Hartman <greg@kroah.com> diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt index 63edc5f..3ec6c72 100644 --- a/Documentation/MSI-HOWTO.txt +++ b/Documentation/MSI-HOWTO.txt @@ -10,14 +10,22 @@ This guide describes the basics of Message Signaled Interrupts (MSI), the advantages of using MSI over traditional interrupt mechanisms, and how to enable your driver to use MSI or MSI-X. Also included is -a Frequently Asked Questions. +a Frequently Asked Questions (FAQ) section. + +1.1 Terminology + +PCI devices can be single-function or multi-function. In either case, +when this text talks about enabling or disabling MSI on a "device +function," it is referring to one specific PCI device and function and +not to all functions on a PCI device (unless the PCI device has only +one function). 2. Copyright 2003 Intel Corporation 3. What is MSI/MSI-X? Message Signaled Interrupt (MSI), as described in the PCI Local Bus -Specification Revision 2.3 or latest, is an optional feature, and a +Specification Revision 2.3 or later, is an optional feature, and a required feature for PCI Express devices. MSI enables a device function to request service by sending an Inbound Memory Write on its PCI bus to the FSB as a Message Signal Interrupt transaction. Because MSI is @@ -27,7 +35,7 @@ supported. A PCI device that supports MSI must also support pin IRQ assertion interrupt mechanism to provide backward compatibility for systems that -do not support MSI. In Systems, which support MSI, the bus driver is +do not support MSI. In systems which support MSI, the bus driver is responsible for initializing the message address and message data of the device function's MSI/MSI-X capability structure during device initial configuration. @@ -61,17 +69,17 @@ over the MSI capability structure as described below. - MSI and MSI-X both support per-vector masking. Per-vector masking is an optional extension of MSI but a required - feature for MSI-X. Per-vector masking provides the kernel - the ability to mask/unmask MSI when servicing its software - interrupt service routing handler. If per-vector masking is + feature for MSI-X. Per-vector masking provides the kernel the + ability to mask/unmask a single MSI while running its + interrupt service routine. If per-vector masking is not supported, then the device driver should provide the hardware/software synchronization to ensure that the device generates MSI when the driver wants it to do so. 4. Why use MSI? -As a benefit the simplification of board design, MSI allows board -designers to remove out of band interrupt routing. MSI is another +As a benefit to the simplification of board design, MSI allows board +designers to remove out-of-band interrupt routing. MSI is another step towards a legacy-free environment. Due to increasing pressure on chipset and processor packages to @@ -87,7 +95,7 @@ support. As a result, the PCI Express technology requires MSI support for better interrupt performance. Using MSI enables the device functions to support two or more -vectors, which can be configured to target different CPU's to +vectors, which can be configured to target different CPUs to increase scalability. 5. Configuring a driver to use MSI/MSI-X @@ -119,13 +127,13 @@ pci_enable_msi() explicitly. int pci_enable_msi(struct pci_dev *dev) -With this new API, any existing device driver, which like to have -MSI enabled on its device function, must call this API to enable MSI +With this new API, a device driver that wants to have MSI +enabled on its device function must call this API to enable MSI. A successful call will initialize the MSI capability structure with ONE vector, regardless of whether a device function is capable of supporting multiple messages. This vector replaces the -pre-assigned dev->irq with a new MSI vector. To avoid the conflict -of new assigned vector with existing pre-assigned vector requires +pre-assigned dev->irq with a new MSI vector. To avoid a conflict +of the new assigned vector with existing pre-assigned vector requires a device driver to call this API before calling request_irq(). 5.2.2 API pci_disable_msi @@ -137,14 +145,14 @@ when a device driver is unloading. This API restores dev->irq with the pre-assigned IOAPIC vector and switches a device's interrupt mode to PCI pin-irq assertion/INTx emulation mode. -Note that a device driver should always call free_irq() on MSI vector -it has done request_irq() on before calling this API. Failure to do -so results a BUG_ON() and a device will be left with MSI enabled and +Note that a device driver should always call free_irq() on the MSI vector +that it has done request_irq() on before calling this API. Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and leaks its vector. 5.2.3 MSI mode vs. legacy mode diagram -The below diagram shows the events, which switches the interrupt +The below diagram shows the events which switch the interrupt mode on the MSI-capable device function between MSI mode and PIN-IRQ assertion mode. @@ -155,9 +163,9 @@ PIN-IRQ assertion mode. ------------ pci_disable_msi ------------------------ -Figure 1.0 MSI Mode vs. Legacy Mode +Figure 1. MSI Mode vs. Legacy Mode -In Figure 1.0, a device operates by default in legacy mode. Legacy +In Figure 1, a device operates by default in legacy mode. Legacy in this context means PCI pin-irq assertion or PCI-Express INTx emulation. A successful MSI request (using pci_enable_msi()) switches a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector @@ -166,11 +174,11 @@ assigned MSI vector will replace dev->irq. To return back to its default mode, a device driver should always call pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a -device driver should always call free_irq() on MSI vector it has done -request_irq() on before calling pci_disable_msi(). Failure to do so -results a BUG_ON() and a device will be left with MSI enabled and +device driver should always call free_irq() on the MSI vector it has +done request_irq() on before calling pci_disable_msi(). Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and leaks its vector. Otherwise, the PCI subsystem restores a device's -dev->irq with a pre-assigned IOAPIC vector and marks released +dev->irq with a pre-assigned IOAPIC vector and marks the released MSI vector as unused. Once being marked as unused, there is no guarantee that the PCI @@ -178,8 +186,8 @@ subsystem will reserve this MSI vector for a device. Depending on the availability of current PCI vector resources and the number of MSI/MSI-X requests from other drivers, this MSI may be re-assigned. -For the case where the PCI subsystem re-assigned this MSI vector -another driver, a request to switching back to MSI mode may result +For the case where the PCI subsystem re-assigns this MSI vector to +another driver, a request to switch back to MSI mode may result in being assigned a different MSI vector or a failure if no more vectors are available. @@ -208,12 +216,12 @@ Unlike the function pci_enable_msi(), the function pci_enable_msix() does not replace the pre-assigned IOAPIC dev->irq with a new MSI vector because the PCI subsystem writes the 1:1 vector-to-entry mapping into the field vector of each element contained in a second argument. -Note that the pre-assigned IO-APIC dev->irq is valid only if the device -operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt of +Note that the pre-assigned IOAPIC dev->irq is valid only if the device +operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at using dev->irq by the device driver to request for interrupt service may result unpredictabe behavior. -For each MSI-X vector granted, a device driver is responsible to call +For each MSI-X vector granted, a device driver is responsible for calling other functions like request_irq(), enable_irq(), etc. to enable this vector with its corresponding interrupt service handler. It is a device driver's choice to assign all vectors with the same @@ -224,13 +232,13 @@ service handler. The PCI 3.0 specification has implementation notes that MMIO address space for a device's MSI-X structure should be isolated so that the -software system can set different page for controlling accesses to -the MSI-X structure. The implementation of MSI patch requires the PCI +software system can set different pages for controlling accesses to the +MSI-X structure. The implementation of MSI support requires the PCI subsystem, not a device driver, to maintain full control of the MSI-X -table/MSI-X PBA and MMIO address space of the MSI-X table/MSI-X PBA. -A device driver is prohibited from requesting the MMIO address space -of the MSI-X table/MSI-X PBA. Otherwise, the PCI subsystem will fail -enabling MSI-X on its hardware device when it calls the function +table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X +table/MSI-X PBA. A device driver is prohibited from requesting the MMIO +address space of the MSI-X table/MSI-X PBA. Otherwise, the PCI subsystem +will fail enabling MSI-X on its hardware device when it calls the function pci_enable_msix(). 5.3.2 Handling MSI-X allocation @@ -274,9 +282,9 @@ For the case where fewer MSI-X vectors are allocated to a function than requested, the function pci_enable_msix() will return the maximum number of MSI-X vectors available to the caller. A device driver may re-send its request with fewer or equal vectors indicated -in a return. For example, if a device driver requests 5 vectors, but -the number of available vectors is 3 vectors, a value of 3 will be a -return as a result of pci_enable_msix() call. A function could be +in the return. For example, if a device driver requests 5 vectors, but +the number of available vectors is 3 vectors, a value of 3 will be +returned as a result of pci_enable_msix() call. A function could be designed for its driver to use only 3 MSI-X table entries as different combinations as ABC--, A-B-C, A--CB, etc. Note that this patch does not support multiple entries with the same vector. Such @@ -285,49 +293,46 @@ as ABBCC, AABCC, BCCBA, etc will result as a failure by the function pci_enable_msix(). Below are the reasons why supporting multiple entries with the same vector is an undesirable solution. - - The PCI subsystem can not determine which entry, which - generated the message, to mask/unmask MSI while handling + - The PCI subsystem cannot determine the entry that + generated the message to mask/unmask MSI while handling software driver ISR. Attempting to walk through all MSI-X table entries (2048 max) to mask/unmask any match vector is an undesirable solution. - - Walk through all MSI-X table entries (2048 max) to handle + - Walking through all MSI-X table entries (2048 max) to handle SMP affinity of any match vector is an undesirable solution. 5.3.4 API pci_enable_msix -int pci_enable_msix(struct pci_dev *dev, u32 *entries, int nvec) +int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) This API enables a device driver to request the PCI subsystem -for enabling MSI-X messages on its hardware device. Depending on +to enable MSI-X messages on its hardware device. Depending on the availability of PCI vectors resources, the PCI subsystem enables -either all or nothing. +either all or none of the requested vectors. -Argument dev points to the device (pci_dev) structure. +Argument 'dev' points to the device (pci_dev) structure. -Argument entries is a pointer of unsigned integer type. The number of -elements is indicated in argument nvec. The content of each element -will be mapped to the following struct defined in /driver/pci/msi.h. +Argument 'entries' is a pointer to an array of msix_entry structs. +The number of entries is indicated in argument 'nvec'. +struct msix_entry is defined in /driver/pci/msi.h: struct msix_entry { u16 vector; /* kernel uses to write alloc vector */ u16 entry; /* driver uses to specify entry */ }; -A device driver is responsible for initializing the field entry of -each element with unique entry supported by MSI-X table. Otherwise, +A device driver is responsible for initializing the field 'entry' of +each element with a unique entry supported by MSI-X table. Otherwise, -EINVAL will be returned as a result. A successful return of zero -indicates the PCI subsystem completes initializing each of requested +indicates the PCI subsystem completed initializing each of the requested entries of the MSI-X table with message address and message data. Last but not least, the PCI subsystem will write the 1:1 -vector-to-entry mapping into the field vector of each element. A -device driver is responsible of keeping track of allocated MSI-X +vector-to-entry mapping into the field 'vector' of each element. A +device driver is responsible for keeping track of allocated MSI-X vectors in its internal data structure. -Argument nvec is an integer indicating the number of messages -requested. - -A return of zero indicates that the number of MSI-X vectors is +A return of zero indicates that the number of MSI-X vectors was successfully allocated. A return of greater than zero indicates MSI-X vector shortage. Or a return of less than zero indicates a failure. This failure may be a result of duplicate entries @@ -341,12 +346,12 @@ void pci_disable_msix(struct pci_dev *dev) This API should always be used to undo the effect of pci_enable_msix() when a device driver is unloading. Note that a device driver should always call free_irq() on all MSI-X vectors it has done request_irq() -on before calling this API. Failure to do so results a BUG_ON() and +on before calling this API. Failure to do so results in a BUG_ON() and a device will be left with MSI-X enabled and leaks its vectors. 5.3.6 MSI-X mode vs. legacy mode diagram -The below diagram shows the events, which switches the interrupt +The below diagram shows the events which switch the interrupt mode on the MSI-X capable device function between MSI-X mode and PIN-IRQ assertion mode (legacy). @@ -356,22 +361,22 @@ PIN-IRQ assertion mode (legacy). | | ===============> | | ------------ pci_disable_msix ------------------------ -Figure 2.0 MSI-X Mode vs. Legacy Mode +Figure 2. MSI-X Mode vs. Legacy Mode -In Figure 2.0, a device operates by default in legacy mode. A +In Figure 2, a device operates by default in legacy mode. A successful MSI-X request (using pci_enable_msix()) switches a device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector stored in dev->irq will be saved by the PCI subsystem; however, unlike MSI mode, the PCI subsystem will not replace dev->irq with assigned MSI-X vector because the PCI subsystem already writes the 1:1 -vector-to-entry mapping into the field vector of each element +vector-to-entry mapping into the field 'vector' of each element specified in second argument. To return back to its default mode, a device driver should always call pci_disable_msix() to undo the effect of pci_enable_msix(). Note that a device driver should always call free_irq() on all MSI-X vectors it has done request_irq() on before calling pci_disable_msix(). Failure -to do so results a BUG_ON() and a device will be left with MSI-X +to do so results in a BUG_ON() and a device will be left with MSI-X enabled and leaks its vectors. Otherwise, the PCI subsystem switches a device function's interrupt mode from MSI-X mode to legacy mode and marks all allocated MSI-X vectors as unused. @@ -383,53 +388,56 @@ MSI/MSI-X requests from other drivers, these MSI-X vectors may be re-assigned. For the case where the PCI subsystem re-assigned these MSI-X vectors -to other driver, a request to switching back to MSI-X mode may result +to other drivers, a request to switch back to MSI-X mode may result being assigned with another set of MSI-X vectors or a failure if no more vectors are available. -5.4 Handling function implementng both MSI and MSI-X capabilities +5.4 Handling function implementing both MSI and MSI-X capabilities For the case where a function implements both MSI and MSI-X capabilities, the PCI subsystem enables a device to run either in MSI mode or MSI-X mode but not both. A device driver determines whether it wants MSI or MSI-X enabled on its hardware device. Once a device -driver requests for MSI, for example, it is prohibited to request for +driver requests for MSI, for example, it is prohibited from requesting MSI-X; in other words, a device driver is not permitted to ping-pong between MSI mod MSI-X mode during a run-time. 5.5 Hardware requirements for MSI/MSI-X support + MSI/MSI-X support requires support from both system hardware and individual hardware device functions. 5.5.1 System hardware support + Since the target of MSI address is the local APIC CPU, enabling -MSI/MSI-X support in Linux kernel is dependent on whether existing -system hardware supports local APIC. Users should verify their -system whether it runs when CONFIG_X86_LOCAL_APIC=y. +MSI/MSI-X support in the Linux kernel is dependent on whether existing +system hardware supports local APIC. Users should verify that their +system supports local APIC operation by testing that it runs when +CONFIG_X86_LOCAL_APIC=y. In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set; however, in UP environment, users must manually set CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting -CONFIG_PCI_MSI enables the VECTOR based scheme and -the option for MSI-capable device drivers to selectively enable -MSI/MSI-X. +CONFIG_PCI_MSI enables the VECTOR based scheme and the option for +MSI-capable device drivers to selectively enable MSI/MSI-X. Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X vector is allocated new during runtime and MSI/MSI-X support does not depend on BIOS support. This key independency enables MSI/MSI-X -support on future IOxAPIC free platform. +support on future IOxAPIC free platforms. 5.5.2 Device hardware support + The hardware device function supports MSI by indicating the MSI/MSI-X capability structure on its PCI capability list. By default, this capability structure will not be initialized by the kernel to enable MSI during the system boot. In other words, the device function is running on its default pin assertion mode. Note that in many cases the hardware supporting MSI have bugs, -which may result in system hang. The software driver of specific -MSI-capable hardware is responsible for whether calling +which may result in system hangs. The software driver of specific +MSI-capable hardware is responsible for deciding whether to call pci_enable_msi or not. A return of zero indicates the kernel -successfully initializes the MSI/MSI-X capability structure of the +successfully initialized the MSI/MSI-X capability structure of the device function. The device function is now running on MSI/MSI-X mode. 5.6 How to tell whether MSI/MSI-X is enabled on device function @@ -439,10 +447,10 @@ pci_enable_msi()/pci_enable_msix() indicates to a device driver that its device function is initialized successfully and ready to run in MSI/MSI-X mode. -At the user level, users can use command 'cat /proc/interrupts' -to display the vector allocated for a device and its interrupt -MSI/MSI-X mode ("PCI MSI"/"PCI MSIX"). Below shows below MSI mode is -enabled on a SCSI Adaptec 39320D Ultra320. +At the user level, users can use the command 'cat /proc/interrupts' +to display the vectors allocated for devices and their interrupt +MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is +enabled on a SCSI Adaptec 39320D Ultra320 controller. CPU0 CPU1 0: 324639 0 IO-APIC-edge timer @@ -453,8 +461,8 @@ enabled on a SCSI Adaptec 39320D Ultra320. 15: 1 0 IO-APIC-edge ide1 169: 0 0 IO-APIC-level uhci-hcd 185: 0 0 IO-APIC-level uhci-hcd -193: 138 10 PCI MSI aic79xx -201: 30 0 PCI MSI aic79xx +193: 138 10 PCI-MSI aic79xx +201: 30 0 PCI-MSI aic79xx 225: 30 0 IO-APIC-level aic7xxx 233: 30 0 IO-APIC-level aic7xxx NMI: 0 0 @@ -490,8 +498,8 @@ target address set as 0xfeexxxxx, as conformed to PCI specification 2.3 or latest, then it should work. Q4. From the driver point of view, if the MSI is lost because -of the errors occur during inbound memory write, then it may -wait for ever. Is there a mechanism for it to recover? +of errors occurring during inbound memory write, then it may +wait forever. Is there a mechanism for it to recover? A4. Since the target of the transaction is an inbound memory write, all transaction termination conditions (Retry, diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt new file mode 100644 index 0000000..e4c3815 --- /dev/null +++ b/Documentation/RCU/torture.txt @@ -0,0 +1,122 @@ +RCU Torture Test Operation + + +CONFIG_RCU_TORTURE_TEST + +The CONFIG_RCU_TORTURE_TEST config option is available for all RCU +implementations. It creates an rcutorture kernel module that can +be loaded to run a torture test. The test periodically outputs +status messages via printk(), which can be examined via the dmesg +command (perhaps grepping for "rcutorture"). The test is started +when the module is loaded, and stops when the module is unloaded. + +However, actually setting this config option to "y" results in the system +running the test immediately upon boot, and ending only when the system +is taken down. Normally, one will instead want to build the system +with CONFIG_RCU_TORTURE_TEST=m and to use modprobe and rmmod to control +the test, perhaps using a script similar to the one shown at the end of +this document. Note that you will need CONFIG_MODULE_UNLOAD in order +to be able to end the test. + + +MODULE PARAMETERS + +This module has the following parameters: + +nreaders This is the number of RCU reading threads supported. + The default is twice the number of CPUs. Why twice? + To properly exercise RCU implementations with preemptible + read-side critical sections. + +stat_interval The number of seconds between output of torture + statistics (via printk()). Regardless of the interval, + statistics are printed when the module is unloaded. + Setting the interval to zero causes the statistics to + be printed -only- when the module is unloaded, and this + is the default. + +verbose Enable debug printk()s. Default is disabled. + + +OUTPUT + +The statistics output is as follows: + + rcutorture: --- Start of test: nreaders=16 stat_interval=0 verbose=0 + rcutorture: rtc: 0000000000000000 ver: 1916 tfle: 0 rta: 1916 rtaf: 0 rtf: 1915 + rcutorture: Reader Pipe: 1466408 9747 0 0 0 0 0 0 0 0 0 + rcutorture: Reader Batch: 1464477 11678 0 0 0 0 0 0 0 0 + rcutorture: Free-Block Circulation: 1915 1915 1915 1915 1915 1915 1915 1915 1915 1915 0 + rcutorture: --- End of test + +The command "dmesg | grep rcutorture:" will extract this information on +most systems. On more esoteric configurations, it may be necessary to +use other commands to access the output of the printk()s used by +the RCU torture test. The printk()s use KERN_ALERT, so they should +be evident. ;-) + +The entries are as follows: + +o "ggp": The number of counter flips (or batches) since boot. + +o "rtc": The hexadecimal address of the structure currently visible + to readers. + +o "ver": The number of times since boot that the rcutw writer task + has changed the structure visible to readers. + +o "tfle": If non-zero, indicates that the "torture freelist" + containing structure to be placed into the "rtc" area is empty. + This condition is important, since it can fool you into thinking + that RCU is working when it is not. :-/ + +o "rta": Number of structures allocated from the torture freelist. + +o "rtaf": Number of allocations from the torture freelist that have + failed due to the list being empty. + +o "rtf": Number of frees into the torture freelist. + +o "Reader Pipe": Histogram of "ages" of structures seen by readers. + If any entries past the first two are non-zero, RCU is broken. + And rcutorture prints the error flag string "!!!" to make sure + you notice. The age of a newly allocated structure is zero, + it becomes one when removed from reader visibility, and is + incremented once per grace period subsequently -- and is freed + after passing through (RCU_TORTURE_PIPE_LEN-2) grace periods. + + The output displayed above was taken from a correctly working + RCU. If you want to see what it looks like when broken, break + it yourself. ;-) + +o "Reader Batch": Another histogram of "ages" of structures seen + by readers, but in terms of counter flips (or batches) rather + than in terms of grace periods. The legal number of non-zero + entries is again two. The reason for this separate view is + that it is easier to get the third entry to show up in the + "Reader Batch" list than in the "Reader Pipe" list. + +o "Free-Block Circulation": Shows the number of torture structures + that have reached a given point in the pipeline. The first element + should closely correspond to the number of structures allocated, + the second to the number that have been removed from reader view, + and all but the last remaining to the corresponding number of + passes through a grace period. The last entry should be zero, + as it is only incremented if a torture structure's counter + somehow gets incremented farther than it should. + + +USAGE + +The following script may be used to torture RCU: + + #!/bin/sh + + modprobe rcutorture + sleep 100 + rmmod rcutorture + dmesg | grep rcutorture: + +The output can be manually inspected for the error flag of "!!!". +One could of course create a more elaborate script that automatically +checked for such errors. diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 354d89c..15da168 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -772,8 +772,6 @@ RCU pointer/list traversal: list_for_each_entry_rcu list_for_each_continue_rcu (to be deprecated in favor of new list_for_each_entry_continue_rcu) - hlist_for_each_rcu (to be deprecated in favor of - hlist_for_each_entry_rcu) hlist_for_each_entry_rcu RCU pointer update: diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 7f43b04..237d54c 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -301,8 +301,84 @@ now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. +12) The canonical patch format -12) More references for submitting patches +The canonical patch subject line is: + + Subject: [PATCH 001/123] subsystem: summary phrase + +The canonical patch message body contains the following: + + - A "from" line specifying the patch author. + + - An empty line. + + - The body of the explanation, which will be copied to the + permanent changelog to describe this patch. + + - The "Signed-off-by:" lines, described above, which will + also go in the changelog. + + - A marker line containing simply "---". + + - Any additional comments not suitable for the changelog. + + - The actual patch (diff output). + +The Subject line format makes it very easy to sort the emails +alphabetically by subject line - pretty much any email reader will +support that - since because the sequence number is zero-padded, +the numerical and alphabetic sort is the same. + +The "subsystem" in the email's Subject should identify which +area or subsystem of the kernel is being patched. + +The "summary phrase" in the email's Subject should concisely +describe the patch which that email contains. The "summary +phrase" should not be a filename. Do not use the same "summary +phrase" for every patch in a whole patch series. + +Bear in mind that the "summary phrase" of your email becomes +a globally-unique identifier for that patch. It propagates +all the way into the git changelog. The "summary phrase" may +later be used in developer discussions which refer to the patch. +People will want to google for the "summary phrase" to read +discussion regarding that patch. + +A couple of example Subjects: + + Subject: [patch 2/5] ext2: improve scalability of bitmap searching + Subject: [PATCHv2 001/207] x86: fix eflags tracking + +The "from" line must be the very first line in the message body, +and has the form: + + From: Original Author <author@example.com> + +The "from" line specifies who will be credited as the author of the +patch in the permanent changelog. If the "from" line is missing, +then the "From:" line from the email header will be used to determine +the patch author in the changelog. + +The explanation body will be committed to the permanent source +changelog, so should make sense to a competent reader who has long +since forgotten the immediate details of the discussion that might +have led to this patch. + +The "---" marker line serves the essential purpose of marking for patch +handling tools where the changelog message ends. + +One good use for the additional comments after the "---" marker is for +a diffstat, to show what files have changed, and the number of inserted +and deleted lines per file. A diffstat is especially useful on bigger +patches. Other comments relevant only to the moment or the maintainer, +not suitable for the permanent changelog, should also go here. + +See more details on the proper patch format in the following +references. + + +13) More references for submitting patches Andrew Morton, "The perfect patch" (tpp). <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt> @@ -310,6 +386,14 @@ Andrew Morton, "The perfect patch" (tpp). Jeff Garzik, "Linux kernel patch submission format." <http://linux.yyz.us/patch-format.html> +Greg KH, "How to piss off a kernel subsystem maintainer" + <http://www.kroah.com/log/2005/03/31/> + +Kernel Documentation/CodingStyle + <http://sosdg.org/~coywolf/lxr/source/Documentation/CodingStyle> + +Linus Torvald's mail on the canonical patch format: + <http://lkml.org/lkml/2005/4/7/183> ----------------------------------- diff --git a/Documentation/arm/README b/Documentation/arm/README index a6f718e..5ed6f35 100644 --- a/Documentation/arm/README +++ b/Documentation/arm/README @@ -8,10 +8,9 @@ Compilation of kernel --------------------- In order to compile ARM Linux, you will need a compiler capable of - generating ARM ELF code with GNU extensions. GCC 2.95.1, EGCS - 1.1.2, and GCC 3.3 are known to be good compilers. Fortunately, you - needn't guess. The kernel will report an error if your compiler is - a recognized offender. + generating ARM ELF code with GNU extensions. GCC 3.3 is known to be + a good compiler. Fortunately, you needn't guess. The kernel will report + an error if your compiler is a recognized offender. To build ARM Linux natively, you shouldn't have to alter the ARCH = line in the top level Makefile. However, if you don't have the ARM Linux ELF diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 3af4d29..89aa89d 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -81,7 +81,8 @@ Adding New Machines Any large scale modifications, or new drivers should be discussed on the ARM kernel mailing list (linux-arm-kernel) before being - attempted. + attempted. See http://www.arm.linux.org.uk/mailinglists/ for the + mailing list information. NAND @@ -120,6 +121,43 @@ Clock Management various clock units +Platform Data +------------- + + Whenever a device has platform specific data that is specified + on a per-machine basis, care should be taken to ensure the + following: + + 1) that default data is not left in the device to confuse the + driver if a machine does not set it at startup + + 2) the data should (if possible) be marked as __initdata, + to ensure that the data is thrown away if the machine is + not the one currently in use. + + The best way of doing this is to make a function that + kmalloc()s an area of memory, and copies the __initdata + and then sets the relevant device's platform data. Making + the function `__init` takes care of ensuring it is discarded + with the rest of the initialisation code + + static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd) + { + struct s3c2410_xxx_mach_info *npd; + + npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL); + if (npd) { + memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info)); + s3c_device_xxx.dev.platform_data = npd; + } else { + printk(KERN_ERR "no memory for xxx platform data\n"); + } + } + + Note, since the code is marked as __init, it should not be + exported outside arch/arm/mach-s3c2410/, or exported to + modules via EXPORT_SYMBOL() and related functions. + Port Contributors ----------------- @@ -149,6 +187,7 @@ Document Changes 06 Mar 2005 - BJD - Added Christer Weinigel 08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction 08 Mar 2005 - BJD - Added section on adding machines + 09 Sep 2005 - BJD - Added section on platform data Document Author --------------- diff --git a/Documentation/arm/VFP/release-notes.txt b/Documentation/arm/VFP/release-notes.txt index f28e022..28a2795 100644 --- a/Documentation/arm/VFP/release-notes.txt +++ b/Documentation/arm/VFP/release-notes.txt @@ -12,7 +12,7 @@ This release has been validated against the SoftFloat-2b library by John R. Hauser using the TestFloat-2a test suite. Details of this library and test suite can be found at: - http://www.cs.berkeley.edu/~jhauser/arithmetic/SoftFloat.html + http://www.jhauser.us/arithmetic/SoftFloat.html The operations which have been tested with this package are: diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt index 4b1c93a..dc60455 100644 --- a/Documentation/arm/memory.txt +++ b/Documentation/arm/memory.txt @@ -1,7 +1,7 @@ Kernel Memory Layout on ARM Linux Russell King <rmk@arm.linux.org.uk> - May 21, 2004 (2.6.6) + November 17, 2005 (2.6.15) This document describes the virtual memory layout which the Linux kernel uses for ARM processors. It indicates which regions are @@ -37,6 +37,8 @@ ff000000 ffbfffff Reserved for future expansion of DMA mapping region. VMALLOC_END feffffff Free for platform use, recommended. + VMALLOC_END must be aligned to a 2MB + boundary. VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space. Memory returned by vmalloc/ioremap will diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt index 8eedaa2..23a1c24 100644 --- a/Documentation/atomic_ops.txt +++ b/Documentation/atomic_ops.txt @@ -115,6 +115,33 @@ boolean is return which indicates whether the resulting counter value is negative. It requires explicit memory barrier semantics around the operation. +Then: + + int atomic_cmpxchg(atomic_t *v, int old, int new); + +This performs an atomic compare exchange operation on the atomic value v, +with the given old and new values. Like all atomic_xxx operations, +atomic_cmpxchg will only satisfy its atomicity semantics as long as all +other accesses of *v are performed through atomic_xxx operations. + +atomic_cmpxchg requires explicit memory barriers around the operation. + +The semantics for atomic_cmpxchg are the same as those defined for 'cas' +below. + +Finally: + + int atomic_add_unless(atomic_t *v, int a, int u); + +If the atomic value v is not equal to u, this function adds a to v, and +returns non zero. If v is equal to u then it returns zero. This is done as +an atomic operation. + +atomic_add_unless requires explicit memory barriers around the operation. + +atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0) + + If a caller requires memory barrier semantics around an atomic_t operation which does not return a value, a set of interfaces are defined which accomplish this: diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 6dd274d..0fe01c8 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -906,9 +906,20 @@ Aside: 4. The I/O scheduler -I/O schedulers are now per queue. They should be runtime switchable and modular -but aren't yet. Jens has most bits to do this, but the sysfs implementation is -missing. +I/O scheduler, a.k.a. elevator, is implemented in two layers. Generic dispatch +queue and specific I/O schedulers. Unless stated otherwise, elevator is used +to refer to both parts and I/O scheduler to specific I/O schedulers. + +Block layer implements generic dispatch queue in ll_rw_blk.c and elevator.c. +The generic dispatch queue is responsible for properly ordering barrier +requests, requeueing, handling non-fs requests and all other subtleties. + +Specific I/O schedulers are responsible for ordering normal filesystem +requests. They can also choose to delay certain requests to improve +throughput or whatever purpose. As the plural form indicates, there are +multiple I/O schedulers. They can be built as modules but at least one should +be built inside the kernel. Each queue can choose different one and can also +change to another one dynamically. A block layer call to the i/o scheduler follows the convention elv_xxx(). This calls elevator_xxx_fn in the elevator switch (drivers/block/elevator.c). Oh, @@ -921,44 +932,36 @@ keeping work. The functions an elevator may implement are: (* are mandatory) elevator_merge_fn called to query requests for merge with a bio -elevator_merge_req_fn " " " with another request +elevator_merge_req_fn called when two requests get merged. the one + which gets merged into the other one will be + never seen by I/O scheduler again. IOW, after + being merged, the request is gone. elevator_merged_fn called when a request in the scheduler has been involved in a merge. It is used in the deadline scheduler for example, to reposition the request if its sorting order has changed. -*elevator_next_req_fn returns the next scheduled request, or NULL - if there are none (or none are ready). +elevator_dispatch_fn fills the dispatch queue with ready requests. + I/O schedulers are free to postpone requests by + not filling the dispatch queue unless @force + is non-zero. Once dispatched, I/O schedulers + are not allowed to manipulate the requests - + they belong to generic dispatch queue. -*elevator_add_req_fn called to add a new request into the scheduler +elevator_add_req_fn called to add a new request into the scheduler elevator_queue_empty_fn returns true if the merge queue is empty. Drivers shouldn't use this, but rather check if elv_next_request is NULL (without losing the request if one exists!) -elevator_remove_req_fn This is called when a driver claims ownership of - the target request - it now belongs to the - driver. It must not be modified or merged. - Drivers must not lose the request! A subsequent - call of elevator_next_req_fn must return the - _next_ request. - -elevator_requeue_req_fn called to add a request to the scheduler. This - is used when the request has alrnadebeen - returned by elv_next_request, but hasn't - completed. If this is not implemented then - elevator_add_req_fn is called instead. - elevator_former_req_fn elevator_latter_req_fn These return the request before or after the one specified in disk sort order. Used by the block layer to find merge possibilities. -elevator_completed_req_fn called when a request is completed. This might - come about due to being merged with another or - when the device completes the request. +elevator_completed_req_fn called when a request is completed. elevator_may_queue_fn returns true if the scheduler wants to allow the current context to queue a new request even if @@ -967,13 +970,33 @@ elevator_may_queue_fn returns true if the scheduler wants to allow the elevator_set_req_fn elevator_put_req_fn Must be used to allocate and free any elevator - specific storate for a request. + specific storage for a request. + +elevator_activate_req_fn Called when device driver first sees a request. + I/O schedulers can use this callback to + determine when actual execution of a request + starts. +elevator_deactivate_req_fn Called when device driver decides to delay + a request by requeueing it. elevator_init_fn elevator_exit_fn Allocate and free any elevator specific storage for a queue. -4.2 I/O scheduler implementation +4.2 Request flows seen by I/O schedulers +All requests seens by I/O schedulers strictly follow one of the following three +flows. + + set_req_fn -> + + i. add_req_fn -> (merged_fn ->)* -> dispatch_fn -> activate_req_fn -> + (deactivate_req_fn -> activate_req_fn ->)* -> completed_req_fn + ii. add_req_fn -> (merged_fn ->)* -> merge_req_fn + iii. [none] + + -> put_req_fn + +4.3 I/O scheduler implementation The generic i/o scheduler algorithm attempts to sort/merge/batch requests for optimal disk scan and request servicing performance (based on generic principles and device capabilities), optimized for: @@ -993,18 +1016,7 @@ request in sort order to prevent binary tree lookups. This arrangement is not a generic block layer characteristic however, so elevators may implement queues as they please. -ii. Last merge hint -The last merge hint is part of the generic queue layer. I/O schedulers must do -some management on it. For the most part, the most important thing is to make -sure q->last_merge is cleared (set to NULL) when the request on it is no longer -a candidate for merging (for example if it has been sent to the driver). - -The last merge performed is cached as a hint for the subsequent request. If -sequential data is being submitted, the hint is used to perform merges without -any scanning. This is not sufficient when there are multiple processes doing -I/O though, so a "merge hash" is used by some schedulers. - -iii. Merge hash +ii. Merge hash AS and deadline use a hash table indexed by the last sector of a request. This enables merging code to quickly look up "back merge" candidates, even when multiple I/O streams are being performed at once on one disk. @@ -1013,29 +1025,8 @@ multiple I/O streams are being performed at once on one disk. are far less common than "back merges" due to the nature of most I/O patterns. Front merges are handled by the binary trees in AS and deadline schedulers. -iv. Handling barrier cases -A request with flags REQ_HARDBARRIER or REQ_SOFTBARRIER must not be ordered -around. That is, they must be processed after all older requests, and before -any newer ones. This includes merges! - -In AS and deadline schedulers, barriers have the effect of flushing the reorder -queue. The performance cost of this will vary from nothing to a lot depending -on i/o patterns and device characteristics. Obviously they won't improve -performance, so their use should be kept to a minimum. - -v. Handling insertion position directives -A request may be inserted with a position directive. The directives are one of -ELEVATOR_INSERT_BACK, ELEVATOR_INSERT_FRONT, ELEVATOR_INSERT_SORT. - -ELEVATOR_INSERT_SORT is a general directive for non-barrier requests. -ELEVATOR_INSERT_BACK is used to insert a barrier to the back of the queue. -ELEVATOR_INSERT_FRONT is used to insert a barrier to the front of the queue, and -overrides the ordering requested by any previous barriers. In practice this is -harmless and required, because it is used for SCSI requeueing. This does not -require flushing the reorder queue, so does not impose a performance penalty. - -vi. Plugging the queue to batch requests in anticipation of opportunities for - merge/sort optimizations +iii. Plugging the queue to batch requests in anticipation of opportunities for + merge/sort optimizations This is just the same as in 2.4 so far, though per-device unplugging support is anticipated for 2.5. Also with a priority-based i/o scheduler, @@ -1069,11 +1060,11 @@ Aside: blk_kick_queue() to unplug a specific queue (right away ?) or optionally, all queues, is in the plan. -4.3 I/O contexts +4.4 I/O contexts I/O contexts provide a dynamically allocated per process data area. They may be used in I/O schedulers, and in the block layer (could be used for IO statis, -priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and -as-iosched.c for an example of usage in an i/o scheduler. +priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c +for an example of usage in an i/o scheduler. 5. Scalability related changes diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt index e132fb1..7eb715e 100644 --- a/Documentation/cachetlb.txt +++ b/Documentation/cachetlb.txt @@ -49,9 +49,6 @@ changes occur: page table operations such as what happens during fork, and exec. - Platform developers note that generic code will always - invoke this interface without mm->page_table_lock held. - 3) void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) @@ -72,9 +69,6 @@ changes occur: call flush_tlb_page (see below) for each entry which may be modified. - Platform developers note that generic code will always - invoke this interface with mm->page_table_lock held. - 4) void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) This time we need to remove the PAGE_SIZE sized translation @@ -93,9 +87,6 @@ changes occur: This is used primarily during fault processing. - Platform developers note that generic code will always - invoke this interface with mm->page_table_lock held. - 5) void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long end) diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 68a711f..1537842 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -133,3 +133,32 @@ hardware and it is important to prevent the kernel from attempting to directly access these devices too, as if the array controller were merely a SCSI controller in the same way that we are allowing it to access SCSI tape drives. +SCSI error handling for tape drives and medium changers +------------------------------------------------------- + +The linux SCSI mid layer provides an error handling protocol which +kicks into gear whenever a SCSI command fails to complete within a +certain amount of time (which can vary depending on the command). +The cciss driver participates in this protocol to some extent. The +normal protocol is a four step process. First the device is told +to abort the command. If that doesn't work, the device is reset. +If that doesn't work, the SCSI bus is reset. If that doesn't work +the host bus adapter is reset. Because the cciss driver is a block +driver as well as a SCSI driver and only the tape drives and medium +changers are presented to the SCSI mid layer, and unlike more +straightforward SCSI drivers, disk i/o continues through the block +side during the SCSI error recovery process, the cciss driver only +implements the first two of these actions, aborting the command, and +resetting the device. Additionally, most tape drives will not oblige +in aborting commands, and sometimes it appears they will not even +obey a reset coommand, though in most circumstances they will. In +the case that the command cannot be aborted and the device cannot be +reset, the device will be set offline. + +In the event the error handling code is triggered and a tape drive is +successfully reset or the tardy command is successfully aborted, the +tape drive may still not allow i/o to continue until some command +is issued which positions the tape to a known position. Typically you +must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) +before i/o can proceed again to a tape drive which was reset. + diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c index b7de82e..3e73231 100644 --- a/Documentation/connector/cn_test.c +++ b/Documentation/connector/cn_test.c @@ -25,7 +25,7 @@ #include <linux/skbuff.h> #include <linux/timer.h> -#include "connector.h" +#include <linux/connector.h> static struct cb_id cn_test_id = { 0x123, 0x456 }; static char cn_test_name[] = "cn_test"; @@ -104,7 +104,7 @@ static int cn_test_want_notify(void) req->first = cn_test_id.val + 20; req->range = 10; - NETLINK_CB(skb).dst_groups = ctl->group; + NETLINK_CB(skb).dst_group = ctl->group; //netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC); netlink_unicast(nls, skb, 0, 0); diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt index 54a0a14..57a314b 100644 --- a/Documentation/connector/connector.txt +++ b/Documentation/connector/connector.txt @@ -131,3 +131,47 @@ Netlink itself is not reliable protocol, that means that messages can be lost due to memory pressure or process' receiving queue overflowed, so caller is warned must be prepared. That is why struct cn_msg [main connector's message header] contains u32 seq and u32 ack fields. + +/*****************************************/ +Userspace usage. +/*****************************************/ +2.6.14 has a new netlink socket implementation, which by default does not +allow to send data to netlink groups other than 1. +So, if to use netlink socket (for example using connector) +with different group number userspace application must subscribe to +that group. It can be achieved by following pseudocode: + +s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); + +l_local.nl_family = AF_NETLINK; +l_local.nl_groups = 12345; +l_local.nl_pid = 0; + +if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { + perror("bind"); + close(s); + return -1; +} + +{ + int on = l_local.nl_groups; + setsockopt(s, 270, 1, &on, sizeof(on)); +} + +Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket +option. To drop multicast subscription one should call above socket option +with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0. + +2.6.14 netlink code only allows to select a group which is less or equal to +the maximum group number, which is used at netlink_kernel_create() time. +In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use +group number 12345, you must increment CN_NETLINK_USERS to that number. +Additional 0xf numbers are allocated to be used by non-in-kernel users. + +Due to this limitation, group 0xffffffff does not work now, so one can +not use add/remove connector's group notifications, but as far as I know, +only cn_test.c test module used it. + +Some work in netlink area is still being done, so things can be changed in +2.6.15 timeframe, if it will happen, documentation will be updated for that +kernel. diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index d17b7d2..a09a8eb 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -94,7 +94,7 @@ the available CPU and Memory resources amongst the requesting tasks. But larger systems, which benefit more from careful processor and memory placement to reduce memory access times and contention, and which typically represent a larger investment for the customer, -can benefit from explictly placing jobs on properly sized subsets of +can benefit from explicitly placing jobs on properly sized subsets of the system. This can be especially valuable on: diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index 95d7f62..941343a 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -35,6 +35,7 @@ The driver load creates the following directories under the /sys file system. /sys/class/firmware/dell_rbu/data /sys/devices/platform/dell_rbu/image_type /sys/devices/platform/dell_rbu/data +/sys/devices/platform/dell_rbu/packet_size The driver supports two types of update mechanism; monolithic and packetized. These update mechanism depends upon the BIOS currently running on the system. @@ -47,8 +48,26 @@ By default the driver uses monolithic memory for the update type. This can be changed to packets during the driver load time by specifying the load parameter image_type=packet. This can also be changed later as below echo packet > /sys/devices/platform/dell_rbu/image_type -Also echoing either mono ,packet or init in to image_type will free up the -memory allocated by the driver. + +In packet update mode the packet size has to be given before any packets can +be downloaded. It is done as below +echo XXXX > /sys/devices/platform/dell_rbu/packet_size +In the packet update mechanism, the user neesd to create a new file having +packets of data arranged back to back. It can be done as follows +The user creates packets header, gets the chunk of the BIOS image and +placs it next to the packetheader; now, the packetheader + BIOS image chunk +added to geather should match the specified packet_size. This makes one +packet, the user needs to create more such packets out of the entire BIOS +image file and then arrange all these packets back to back in to one single +file. +This file is then copied to /sys/class/firmware/dell_rbu/data. +Once this file gets to the driver, the driver extracts packet_size data from +the file and spreads it accross the physical memory in contiguous packet_sized +space. +This method makes sure that all the packets get to the driver in a single operation. + +In monolithic update the user simply get the BIOS image (.hdr file) and copies +to the data file as is without any change to the BIOS image itself. Do the steps below to download the BIOS image. 1) echo 1 > /sys/class/firmware/dell_rbu/loading @@ -58,7 +77,10 @@ Do the steps below to download the BIOS image. The /sys/class/firmware/dell_rbu/ entries will remain till the following is done. echo -1 > /sys/class/firmware/dell_rbu/loading. -Until this step is completed the drivr cannot be unloaded. +Until this step is completed the driver cannot be unloaded. +Also echoing either mono ,packet or init in to image_type will free up the +memory allocated by the driver. + If an user by accident executes steps 1 and 3 above without executing step 2; it will make the /sys/class/firmware/dell_rbu/ entries to disappear. The entries can be recreated by doing the following @@ -66,15 +88,11 @@ echo init > /sys/devices/platform/dell_rbu/image_type NOTE: echoing init in image_type does not change it original value. Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to -read back the image downloaded. This is useful in case of packet update -mechanism where the above steps 1,2,3 will repeated for every packet. -By reading the /sys/devices/platform/dell_rbu/data file all packet data -downloaded can be verified in a single file. -The packets are arranged in this file one after the other in a FIFO order. +read back the image downloaded. NOTE: -This driver requires a patch for firmware_class.c which has the addition -of request_firmware_nowait_nohotplug function to wortk +This driver requires a patch for firmware_class.c which has the modified +request_firmware_nowait function. Also after updating the BIOS image an user mdoe application neeeds to execute code which message the BIOS update request to the BIOS. So on the next reboot the BIOS knows about the new image downloaded and it updates it self. diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt new file mode 100644 index 0000000..a5009c8 --- /dev/null +++ b/Documentation/device-mapper/snapshot.txt @@ -0,0 +1,74 @@ +Device-mapper snapshot support +============================== + +Device-mapper allows you, without massive data copying: + +*) To create snapshots of any block device i.e. mountable, saved states of +the block device which are also writable without interfering with the +original content; +*) To create device "forks", i.e. multiple different versions of the +same data stream. + + +In both cases, dm copies only the chunks of data that get changed and +uses a separate copy-on-write (COW) block device for storage. + + +There are two dm targets available: snapshot and snapshot-origin. + +*) snapshot-origin <origin> + +which will normally have one or more snapshots based on it. +Reads will be mapped directly to the backing device. For each write, the +original data will be saved in the <COW device> of each snapshot to keep +its visible content unchanged, at least until the <COW device> fills up. + + +*) snapshot <origin> <COW device> <persistent?> <chunksize> + +A snapshot of the <origin> block device is created. Changed chunks of +<chunksize> sectors will be stored on the <COW device>. Writes will +only go to the <COW device>. Reads will come from the <COW device> or +from <origin> for unchanged data. <COW device> will often be +smaller than the origin and if it fills up the snapshot will become +useless and be disabled, returning errors. So it is important to monitor +the amount of free space and expand the <COW device> before it fills up. + +<persistent?> is P (Persistent) or N (Not persistent - will not survive +after reboot). +The difference is that for transient snapshots less metadata must be +saved on disk - they can be kept in memory by the kernel. + + +How this is used by LVM2 +======================== +When you create the first LVM2 snapshot of a volume, four dm devices are used: + +1) a device containing the original mapping table of the source volume; +2) a device used as the <COW device>; +3) a "snapshot" device, combining #1 and #2, which is the visible snapshot + volume; +4) the "original" volume (which uses the device number used by the original + source volume), whose table is replaced by a "snapshot-origin" mapping + from device #1. + +A fixed naming scheme is used, so with the following commands: + +lvcreate -L 1G -n base volumeGroup +lvcreate -L 100M --snapshot -n snap volumeGroup/base + +we'll have this situation (with volumes in above order): + +# dmsetup table|grep volumeGroup + +volumeGroup-base-real: 0 2097152 linear 8:19 384 +volumeGroup-snap-cow: 0 204800 linear 8:19 2097536 +volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16 +volumeGroup-base: 0 2097152 snapshot-origin 254:11 + +# ls -lL /dev/mapper/volumeGroup-* +brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real +brw------- 1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow +brw------- 1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap +brw------- 1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base + diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 0f51517..3c406ac 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -2903,14 +2903,14 @@ Your cooperation is appreciated. 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card -216 char USB BlueTooth devices - 0 = /dev/ttyUB0 First USB BlueTooth device - 1 = /dev/ttyUB1 Second USB BlueTooth device +216 char Bluetooth RFCOMM TTY devices + 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device + 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device ... -217 char USB BlueTooth devices (alternate devices) - 0 = /dev/cuub0 Callout device for ttyUB0 - 1 = /dev/cuub1 Callout device for ttyUB1 +217 char Bluetooth RFCOMM TTY devices (alternate devices) + 0 = /dev/curf0 Callout device for rfcomm0 + 1 = /dev/curf1 Callout device for rfcomm1 ... 218 char The Logical Company bus Unibus/Qbus adapters diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index fabaca1..59806c9 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -14,8 +14,8 @@ struct device_driver { int (*probe) (struct device * dev); int (*remove) (struct device * dev); - int (*suspend) (struct device * dev, pm_message_t state, u32 level); - int (*resume) (struct device * dev, u32 level); + int (*suspend) (struct device * dev, pm_message_t state); + int (*resume) (struct device * dev); }; @@ -194,69 +194,13 @@ device; i.e. anything in the device's driver_data field. If the device is still present, it should quiesce the device and place it into a supported low-power state. - int (*suspend) (struct device * dev, pm_message_t state, u32 level); + int (*suspend) (struct device * dev, pm_message_t state); -suspend is called to put the device in a low power state. There are -several stages to successfully suspending a device, which is denoted in -the @level parameter. Breaking the suspend transition into several -stages affords the platform flexibility in performing device power -management based on the requirements of the system and the -user-defined policy. +suspend is called to put the device in a low power state. -SUSPEND_NOTIFY notifies the device that a suspend transition is about -to happen. This happens on system power state transitions to verify -that all devices can successfully suspend. + int (*resume) (struct device * dev); -A driver may choose to fail on this call, which should cause the -entire suspend transition to fail. A driver should fail only if it -knows that the device will not be able to be resumed properly when the -system wakes up again. It could also fail if it somehow determines it -is in the middle of an operation too important to stop. - -SUSPEND_DISABLE tells the device to stop I/O transactions. When it -stops transactions, or what it should do with unfinished transactions -is a policy of the driver. After this call, the driver should not -accept any other I/O requests. - -SUSPEND_SAVE_STATE tells the device to save the context of the -hardware. This includes any bus-specific hardware state and -device-specific hardware state. A pointer to this saved state can be -stored in the device's saved_state field. - -SUSPEND_POWER_DOWN tells the driver to place the device in the low -power state requested. - -Whether suspend is called with a given level is a policy of the -platform. Some levels may be omitted; drivers must not assume the -reception of any level. However, all levels must be called in the -order above; i.e. notification will always come before disabling; -disabling the device will come before suspending the device. - -All calls are made with interrupts enabled, except for the -SUSPEND_POWER_DOWN level. - - int (*resume) (struct device * dev, u32 level); - -Resume is used to bring a device back from a low power state. Like the -suspend transition, it happens in several stages. - -RESUME_POWER_ON tells the driver to set the power state to the state -before the suspend call (The device could have already been in a low -power state before the suspend call to put in a lower power state). - -RESUME_RESTORE_STATE tells the driver to restore the state saved by -the SUSPEND_SAVE_STATE suspend call. - -RESUME_ENABLE tells the driver to start accepting I/O transactions -again. Depending on driver policy, the device may already have pending -I/O requests. - -RESUME_POWER_ON is called with interrupts disabled. The other resume -levels are called with interrupts enabled. - -As with the various suspend stages, the driver must not assume that -any other resume calls have been or will be made. Each call should be -self-contained and not dependent on any external state. +Resume is used to bring a device back from a low power state. Attributes diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.txt index ff2fef2..98b233c 100644 --- a/Documentation/driver-model/porting.txt +++ b/Documentation/driver-model/porting.txt @@ -350,7 +350,7 @@ When a driver is registered, the bus's list of devices is iterated over. bus->match() is called for each device that is not already claimed by a driver. -When a device is successfully bound to a device, device->driver is +When a device is successfully bound to a driver, device->driver is set, the device is added to a per-driver list of devices, and a symlink is created in the driver's sysfs directory that points to the device's physical directory: diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt index cb63b7a..df6c054 100644 --- a/Documentation/dvb/bt8xx.txt +++ b/Documentation/dvb/bt8xx.txt @@ -1,5 +1,5 @@ -How to get the Nebula, PCTV and Twinhan DST cards working -========================================================= +How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working +========================================================================== This class of cards has a bt878a as the PCI interface, and require the bttv driver. @@ -26,27 +26,31 @@ Furthermore you need to enable In general you need to load the bttv driver, which will handle the gpio and i2c communication for us, plus the common dvb-bt8xx device driver. -The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and -TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. +The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst), +FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded +automatically by the dvb-bt8xx device driver. -3a) Nebula / Pinnacle PCTV --------------------------- +3a) Nebula / Pinnacle PCTV / FusionHDTV Lite +--------------------------------------------- $ modprobe bttv (normally bttv is being loaded automatically by kmod) - $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) + $ modprobe dvb-bt8xx + +(or just place dvb-bt8xx in /etc/modules for automatic loading) 3b) TwinHan and Clones -------------------------- - $ modprobe bttv i2c_hw=1 card=0x71 + $ modprobe bttv card=0x71 $ modprobe dvb-bt8xx $ modprobe dst The value 0x71 will override the PCI type detection for dvb-bt8xx, -which is necessary for TwinHan cards. +which is necessary for TwinHan cards. Omission of this parameter might result +in a system lockup. -If you're having an older card (blue color circuit) and card=0x71 locks +If you're having an older card (blue color PCB) and card=0x71 locks up your machine, try using 0x68, too. If that does not work, ask on the mailing list. @@ -64,11 +68,47 @@ verbose=0 means complete disabling of messages dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card. 0x20 means it has a Conditional Access slot. -The autodected values are determined bythe cards 'response -string' which you can see in your logs e.g. +The autodetected values are determined by the cards 'response string' +which you can see in your logs e.g. dst_get_device_id: Recognise [DSTMCI] +If you need to sent in bug reports on the dst, please do send in a complete +log with the verbose=4 module parameter. For general usage, the default setting +of verbose=1 is ideal. + + +4) Multiple cards +-------------------------- + +If you happen to be running multiple cards, it would be advisable to load +the bttv module with the card id. This would help to solve any module loading +problems that you might face. + +For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite + + $ modprobe bttv card=0x71 card=0x87 + +Here the order of the card id is important and should be the same as that of the +physical order of the cards. Here card=0x71 represents the Twinhan and clones +and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be +specified in decimal, rather than hex: + + $ modprobe bttv card=113 card=135 + +Some examples of card-id's + +Pinnacle Sat 0x5e (94) +Nebula Digi TV 0x68 (104) +PC HDTV 0x70 (112) +Twinhan 0x71 (113) +FusionHDTV DVB-T Lite 0x80 (128) +FusionHDTV5 Lite 0x87 (135) + +For a full list of card-id's, see the V4L Documentation within the kernel +source: linux/Documentation/video4linux/CARDLIST.bttv + +If you have problems with this please do ask on the mailing list. -- Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham diff --git a/Documentation/dvb/cards.txt b/Documentation/dvb/cards.txt index efdc4ee..19329cf 100644 --- a/Documentation/dvb/cards.txt +++ b/Documentation/dvb/cards.txt @@ -41,6 +41,12 @@ o Frontends drivers: - dib3000mb : DiBcom 3000-MB demodulator DVB-S/C/T: - dst : TwinHan DST Frontend + ATSC: + - nxt200x : Nxtwave NXT2002 & NXT2004 + - or51211 : or51211 based (pcHDTV HD2000 card) + - or51132 : or51132 based (pcHDTV HD3000 card) + - bcm3510 : Broadcom BCM3510 + - lgdt330x : LG Electronics DT3302 & DT3303 o Cards based on the Phillips saa7146 multimedia PCI bridge chip: @@ -62,6 +68,10 @@ o Cards based on the Conexant Bt8xx PCI bridge: - Nebula Electronics DigiTV - TwinHan DST - Avermedia DVB-T + - ChainTech digitop DST-1000 DVB-S + - pcHDTV HD-2000 TV + - DViCO FusionHDTV DVB-T Lite + - DViCO FusionHDTV5 Lite o Technotrend / Hauppauge DVB USB devices: - Nova USB @@ -83,3 +93,30 @@ o DiBcom DVB-T USB based devices: - DiBcom USB2.0 DVB-T reference device (non-public) o Experimental support for the analog module of the Siemens DVB-C PCI card + +o Cards based on the Conexant cx2388x PCI bridge: + - ADS Tech Instant TV DVB-T PCI + - ATI HDTV Wonder + - digitalnow DNTV Live! DVB-T + - DViCO FusionHDTV DVB-T1 + - DViCO FusionHDTV DVB-T Plus + - DViCO FusionHDTV3 Gold-Q + - DViCO FusionHDTV3 Gold-T + - DViCO FusionHDTV5 Gold + - Hauppauge Nova-T DVB-T + - KWorld/VStream XPert DVB-T + - pcHDTV HD3000 HDTV + - TerraTec Cinergy 1400 DVB-T + - WinFast DTV1000-T + +o Cards based on the Phillips saa7134 PCI bridge: + - Medion 7134 + - Pinnacle PCTV 300i DVB-T + PAL + - LifeView FlyDVB-T DUO + - Typhoon DVB-T Duo Digital/Analog Cardbus + - Philips TOUGH DVB-T reference design + - Philips EUROPA V3 reference design + - Compro Videomate DVB-T300 + - Compro Videomate DVB-T200 + - AVerMedia AVerTVHD MCE A180 + diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt index c9d5ce3..2cbd2d0 100644 --- a/Documentation/dvb/contributors.txt +++ b/Documentation/dvb/contributors.txt @@ -75,5 +75,22 @@ Ernst Peinlich <e.peinlich@inode.at> Peter Beutner <p.beutner@gmx.net> for the IR code for the ttusb-dec driver +Wilson Michaels <wilsonmichaels@earthlink.net> + for the lgdt330x frontend driver, and various bugfixes + +Michael Krufky <mkrufky@m1k.net> + for maintaining v4l/dvb inter-tree dependencies + +Taylor Jacob <rtjacob@earthlink.net> + for the nxt2002 frontend driver + +Jean-Francois Thibert <jeanfrancois@sagetv.com> + for the nxt2004 frontend driver + +Kirk Lapray <kirk.lapray@gmail.com> + for the or51211 and or51132 frontend drivers, and + for merging the nxt2002 and nxt2004 modules into a + single nxt200x frontend driver. + (If you think you should be in this list, but you are not, drop a line to the DVB mailing list) diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt index 3bf51e4..a42132d 100644 --- a/Documentation/dvb/faq.txt +++ b/Documentation/dvb/faq.txt @@ -60,7 +60,6 @@ Some very frequently asked questions about linuxtv-dvb Metzler Bros. DVB development; alternate drivers and DVB utilities, include dvb-mpegtools and tuxzap. - http://www.linuxstb.org/ http://sourceforge.net/projects/dvbtools/ Dave Chapman's dvbtools package, including dvbstream and dvbtune diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index a750f01..be6eb4c 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -22,7 +22,7 @@ use File::Temp qw/ tempdir /; use IO::Handle; @components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t", - "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", + "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb"); # Check args @@ -252,6 +252,23 @@ sub nxt2002 { $outfile; } +sub nxt2004 { + my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip"; + my $url = "http://www.aver.com/support/Drivers/$sourcefile"; + my $hash = "111cb885b1e009188346d72acfed024c"; + my $outfile = "dvb-fe-nxt2004.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + + wgetfile($sourcefile, $url); + unzip($sourcefile, $tmpdir); + verify("$tmpdir/3xHybrid.sys", $hash); + extract("$tmpdir/3xHybrid.sys", 465304, 9584, $outfile); + + $outfile; +} + sub or51211 { my $fwfile = "dvb-fe-or51211.fw"; my $url = "http://linuxtv.org/downloads/firmware/$fwfile"; diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README index 270a88e..cddbac4 100644 --- a/Documentation/early-userspace/README +++ b/Documentation/early-userspace/README @@ -28,7 +28,7 @@ the image from specifications. CPIO ARCHIVE method You can create a cpio archive that contains the early userspace image. -Youre cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it +Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it will be used directly. Only a single cpio file may be specified in CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in combination with a cpio archive. diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt new file mode 100644 index 0000000..08dce0f --- /dev/null +++ b/Documentation/fb/fbcon.txt @@ -0,0 +1,152 @@ +The Framebuffer Console +======================= + + The framebuffer console (fbcon), as its name implies, is a text +console running on top of the framebuffer device. It has the functionality of +any standard text console driver, such as the VGA console, with the added +features that can be attributed to the graphical nature of the framebuffer. + + In the x86 architecture, the framebuffer console is optional, and +some even treat it as a toy. For other architectures, it is the only available +display device, text or graphical. + + What are the features of fbcon? The framebuffer console supports +high resolutions, varying font types, display rotation, primitive multihead, +etc. Theoretically, multi-colored fonts, blending, aliasing, and any feature +made available by the underlying graphics card are also possible. + +A. Configuration + + The framebuffer console can be enabled by using your favorite kernel +configuration tool. It is under Device Drivers->Graphics Support->Support for +framebuffer devices->Framebuffer Console Support. Select 'y' to compile +support statically, or 'm' for module support. The module will be fbcon. + + In order for fbcon to activate, at least one framebuffer driver is +required, so choose from any of the numerous drivers available. For x86 +systems, they almost universally have VGA cards, so vga16fb and vesafb will +always be available. However, using a chipset-specific driver will give you +more speed and features, such as the ability to change the video mode +dynamically. + + To display the penguin logo, choose any logo available in Logo +Configuration->Boot up logo. + + Also, you will need to select at least one compiled-in fonts, but if +you don't do anything, the kernel configuration tool will select one for you, +usually an 8x16 font. + +GOTCHA: A common bug report is enabling the framebuffer without enabling the +framebuffer console. Depending on the driver, you may get a blanked or +garbled display, but the system still boots to completion. If you are +fortunate to have a driver that does not alter the graphics chip, then you +will still get a VGA console. + +B. Loading + +Possible scenarios: + +1. Driver and fbcon are compiled statically + + Usually, fbcon will automatically take over your console. The notable + exception is vesafb. It needs to be explicitly activated with the + vga= boot option parameter. + +2. Driver is compiled statically, fbcon is compiled as a module + + Depending on the driver, you either get a standard console, or a + garbled display, as mentioned above. To get a framebuffer console, + do a 'modprobe fbcon'. + +3. Driver is compiled as a module, fbcon is compiled statically + + You get your standard console. Once the driver is loaded with + 'modprobe xxxfb', fbcon automatically takes over the console with + the possible exception of using the fbcon=map:n option. See below. + +4. Driver and fbcon are compiled as a module. + + You can load them in any order. Once both are loaded, fbcon will take + over the console. + +C. Boot options + + The framebuffer console has several, largely unknown, boot options + that can change its behavior. + +1. fbcon=font:<name> + + Select the initial font to use. The value 'name' can be any of the + compiled-in fonts: VGA8x16, 7x14, 10x18, VGA8x8, MINI4x6, RomanLarge, + SUN8x16, SUN12x22, ProFont6x11, Acorn8x8, PEARL8x8. + + Note, not all drivers can handle font with widths not divisible by 8, + such as vga16fb. + +2. fbcon=scrollback:<value>[k] + + The scrollback buffer is memory that is used to preserve display + contents that has already scrolled past your view. This is accessed + by using the Shift-PageUp key combination. The value 'value' is any + integer. It defaults to 32KB. The 'k' suffix is optional, and will + multiply the 'value' by 1024. + +3. fbcon=map:<0123> + + This is an interesting option. It tells which driver gets mapped to + which console. The value '0123' is a sequence that gets repeated until + the total length is 64 which is the number of consoles available. In + the above example, it is expanded to 012301230123... and the mapping + will be: + + tty | 1 2 3 4 5 6 7 8 9 ... + fb | 0 1 2 3 0 1 2 3 0 ... + + ('cat /proc/fb' should tell you what the fb numbers are) + + One side effect that may be useful is using a map value that exceeds + the number of loaded fb drivers. For example, if only one driver is + available, fb0, adding fbcon=map:1 tells fbcon not to take over the + console. + + Later on, when you want to map the console the to the framebuffer + device, you can use the con2fbmap utility. + +4. fbcon=vc:<n1>-<n2> + + This option tells fbcon to take over only a range of consoles as + specified by the values 'n1' and 'n2'. The rest of the consoles + outside the given range will still be controlled by the standard + console driver. + + NOTE: For x86 machines, the standard console is the VGA console which + is typically located on the same video card. Thus, the consoles that + are controlled by the VGA console will be garbled. + +4. fbcon=rotate:<n> + + This option changes the orientation angle of the console display. The + value 'n' accepts the following: + + 0 - normal orientation (0 degree) + 1 - clockwise orientation (90 degrees) + 2 - upside down orientation (180 degrees) + 3 - counterclockwise orientation (270 degrees) + + The angle can be changed anytime afterwards by 'echoing' the same + numbers to any one of the 2 attributes found in + /sys/class/graphics/fb{x} + + con_rotate - rotate the display of the active console + con_rotate_all - rotate the display of all consoles + + Console rotation will only become available if Console Rotation + Support is compiled in your kernel. + + NOTE: This is purely console rotation. Any other applications that + use the framebuffer will remain at their 'normal'orientation. + Actually, the underlying fb driver is totally ignorant of console + rotation. + +--- +Antonino Daplas <adaplas@pol.net> diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt index 62db675..ee277dd 100644 --- a/Documentation/fb/vesafb.txt +++ b/Documentation/fb/vesafb.txt @@ -146,10 +146,10 @@ pmipal Use the protected mode interface for palette changes. mtrr:n setup memory type range registers for the vesafb framebuffer where n: - 0 - disabled (equivalent to nomtrr) + 0 - disabled (equivalent to nomtrr) (default) 1 - uncachable 2 - write-back - 3 - write-combining (default) + 3 - write-combining 4 - write-through If you see the following in dmesg, choose the type that matches the diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index b67189a..9b74319 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -25,6 +25,13 @@ Who: Adrian Bunk <bunk@stusta.de> --------------------------- +What: drivers depending on OBSOLETE_OSS_DRIVER +When: January 2006 +Why: OSS drivers with ALSA replacements +Who: Adrian Bunk <bunk@stusta.de> + +--------------------------- + What: RCU API moves to EXPORT_SYMBOL_GPL When: April 2006 Files: include/linux/rcupdate.h, kernel/rcupdate.c @@ -60,6 +67,21 @@ Who: Jody McIntyre <scjody@steamballoon.com> --------------------------- +What: Video4Linux API 1 ioctls and video_decoder.h from Video devices. +When: July 2006 +Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6 + series. The old API have lots of drawbacks and don't provide enough + means to work with all video and audio standards. The newer API is + already available on the main drivers and should be used instead. + Newer drivers should use v4l_compat_translate_ioctl function to handle + old calls, replacing to newer ones. + Decoder iocts are using internally to allow video drivers to + communicate with video decoders. This should also be improved to allow + V4L2 calls being translated into compatible internal ioctls. +Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br> + +--------------------------- + What: i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid When: November 2005 Files: drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c @@ -69,6 +91,22 @@ Who: Grant Coady <gcoady@gmail.com> --------------------------- +What: remove EXPORT_SYMBOL(panic_timeout) +When: April 2006 +Files: kernel/panic.c +Why: No modular usage in the kernel. +Who: Adrian Bunk <bunk@stusta.de> + +--------------------------- + +What: remove EXPORT_SYMBOL(insert_resource) +When: April 2006 +Files: kernel/resource.c +Why: No modular usage in the kernel. +Who: Adrian Bunk <bunk@stusta.de> + +--------------------------- + What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl]) When: November 2005 Files: drivers/pcmcia/: pcmcia_ioctl.c @@ -95,3 +133,29 @@ Why: This interface has been obsoleted by the new layer3-independent to link against API-compatible library on top of libnfnetlink_queue instead of the current 'libipq'. Who: Harald Welte <laforge@netfilter.org> + +--------------------------- + +What: EXPORT_SYMBOL(lookup_hash) +When: January 2006 +Why: Too low-level interface. Use lookup_one_len or lookup_create instead. +Who: Christoph Hellwig <hch@lst.de> + +--------------------------- + +What: START_ARRAY ioctl for md +When: July 2006 +Files: drivers/md/md.c +Why: Not reliable by design - can fail when most needed. + Alternatives exist +Who: NeilBrown <neilb@suse.de> + +--------------------------- + +What: au1x00_uart driver +When: January 2006 +Why: The 8250 serial driver now has the ability to deal with the differences + between the standard 8250 family of UARTs and their slightly strange + brother on Alchemy SOCs. The loss of features is not considered an + issue. +Who: Ralf Baechle <ralf@linux-mips.org> diff --git a/Documentation/filesystems/affs.txt b/Documentation/filesystems/affs.txt index 30c9738..2d15244 100644 --- a/Documentation/filesystems/affs.txt +++ b/Documentation/filesystems/affs.txt @@ -216,4 +216,4 @@ due to an incompatibility with the Amiga floppy controller. If you are interested in an Amiga Emulator for Linux, look at -http://www-users.informatik.rwth-aachen.de/~crux/uae.html +http://www.freiburg.linux.de/~uae/ diff --git a/Documentation/filesystems/dentry-locking.txt b/Documentation/filesystems/dentry-locking.txt new file mode 100644 index 0000000..4c0c575 --- /dev/null +++ b/Documentation/filesystems/dentry-locking.txt @@ -0,0 +1,173 @@ +RCU-based dcache locking model +============================== + +On many workloads, the most common operation on dcache is to look up a +dentry, given a parent dentry and the name of the child. Typically, +for every open(), stat() etc., the dentry corresponding to the +pathname will be looked up by walking the tree starting with the first +component of the pathname and using that dentry along with the next +component to look up the next level and so on. Since it is a frequent +operation for workloads like multiuser environments and web servers, +it is important to optimize this path. + +Prior to 2.5.10, dcache_lock was acquired in d_lookup and thus in +every component during path look-up. Since 2.5.10 onwards, fast-walk +algorithm changed this by holding the dcache_lock at the beginning and +walking as many cached path component dentries as possible. This +significantly decreases the number of acquisition of +dcache_lock. However it also increases the lock hold time +significantly and affects performance in large SMP machines. Since +2.5.62 kernel, dcache has been using a new locking model that uses RCU +to make dcache look-up lock-free. + +The current dcache locking model is not very different from the +existing dcache locking model. Prior to 2.5.62 kernel, dcache_lock +protected the hash chain, d_child, d_alias, d_lru lists as well as +d_inode and several other things like mount look-up. RCU-based changes +affect only the way the hash chain is protected. For everything else +the dcache_lock must be taken for both traversing as well as +updating. The hash chain updates too take the dcache_lock. The +significant change is the way d_lookup traverses the hash chain, it +doesn't acquire the dcache_lock for this and rely on RCU to ensure +that the dentry has not been *freed*. + + +Dcache locking details +====================== + +For many multi-user workloads, open() and stat() on files are very +frequently occurring operations. Both involve walking of path names to +find the dentry corresponding to the concerned file. In 2.4 kernel, +dcache_lock was held during look-up of each path component. Contention +and cache-line bouncing of this global lock caused significant +scalability problems. With the introduction of RCU in Linux kernel, +this was worked around by making the look-up of path components during +path walking lock-free. + + +Safe lock-free look-up of dcache hash table +=========================================== + +Dcache is a complex data structure with the hash table entries also +linked together in other lists. In 2.4 kernel, dcache_lock protected +all the lists. We applied RCU only on hash chain walking. The rest of +the lists are still protected by dcache_lock. Some of the important +changes are : + +1. The deletion from hash chain is done using hlist_del_rcu() macro + which doesn't initialize next pointer of the deleted dentry and + this allows us to walk safely lock-free while a deletion is + happening. + +2. Insertion of a dentry into the hash table is done using + hlist_add_head_rcu() which take care of ordering the writes - the + writes to the dentry must be visible before the dentry is + inserted. This works in conjunction with hlist_for_each_rcu() while + walking the hash chain. The only requirement is that all + initialization to the dentry must be done before + hlist_add_head_rcu() since we don't have dcache_lock protection + while traversing the hash chain. This isn't different from the + existing code. + +3. The dentry looked up without holding dcache_lock by cannot be + returned for walking if it is unhashed. It then may have a NULL + d_inode or other bogosity since RCU doesn't protect the other + fields in the dentry. We therefore use a flag DCACHE_UNHASHED to + indicate unhashed dentries and use this in conjunction with a + per-dentry lock (d_lock). Once looked up without the dcache_lock, + we acquire the per-dentry lock (d_lock) and check if the dentry is + unhashed. If so, the look-up is failed. If not, the reference count + of the dentry is increased and the dentry is returned. + +4. Once a dentry is looked up, it must be ensured during the path walk + for that component it doesn't go away. In pre-2.5.10 code, this was + done holding a reference to the dentry. dcache_rcu does the same. + In some sense, dcache_rcu path walking looks like the pre-2.5.10 + version. + +5. All dentry hash chain updates must take the dcache_lock as well as + the per-dentry lock in that order. dput() does this to ensure that + a dentry that has just been looked up in another CPU doesn't get + deleted before dget() can be done on it. + +6. There are several ways to do reference counting of RCU protected + objects. One such example is in ipv4 route cache where deferred + freeing (using call_rcu()) is done as soon as the reference count + goes to zero. This cannot be done in the case of dentries because + tearing down of dentries require blocking (dentry_iput()) which + isn't supported from RCU callbacks. Instead, tearing down of + dentries happen synchronously in dput(), but actual freeing happens + later when RCU grace period is over. This allows safe lock-free + walking of the hash chains, but a matched dentry may have been + partially torn down. The checking of DCACHE_UNHASHED flag with + d_lock held detects such dentries and prevents them from being + returned from look-up. + + +Maintaining POSIX rename semantics +================================== + +Since look-up of dentries is lock-free, it can race against a +concurrent rename operation. For example, during rename of file A to +B, look-up of either A or B must succeed. So, if look-up of B happens +after A has been removed from the hash chain but not added to the new +hash chain, it may fail. Also, a comparison while the name is being +written concurrently by a rename may result in false positive matches +violating rename semantics. Issues related to race with rename are +handled as described below : + +1. Look-up can be done in two ways - d_lookup() which is safe from + simultaneous renames and __d_lookup() which is not. If + __d_lookup() fails, it must be followed up by a d_lookup() to + correctly determine whether a dentry is in the hash table or + not. d_lookup() protects look-ups using a sequence lock + (rename_lock). + +2. The name associated with a dentry (d_name) may be changed if a + rename is allowed to happen simultaneously. To avoid memcmp() in + __d_lookup() go out of bounds due to a rename and false positive + comparison, the name comparison is done while holding the + per-dentry lock. This prevents concurrent renames during this + operation. + +3. Hash table walking during look-up may move to a different bucket as + the current dentry is moved to a different bucket due to rename. + But we use hlists in dcache hash table and they are + null-terminated. So, even if a dentry moves to a different bucket, + hash chain walk will terminate. [with a list_head list, it may not + since termination is when the list_head in the original bucket is + reached]. Since we redo the d_parent check and compare name while + holding d_lock, lock-free look-up will not race against d_move(). + +4. There can be a theoretical race when a dentry keeps coming back to + original bucket due to double moves. Due to this look-up may + consider that it has never moved and can end up in a infinite loop. + But this is not any worse that theoretical livelocks we already + have in the kernel. + + +Important guidelines for filesystem developers related to dcache_rcu +==================================================================== + +1. Existing dcache interfaces (pre-2.5.62) exported to filesystem + don't change. Only dcache internal implementation changes. However + filesystems *must not* delete from the dentry hash chains directly + using the list macros like allowed earlier. They must use dcache + APIs like d_drop() or __d_drop() depending on the situation. + +2. d_flags is now protected by a per-dentry lock (d_lock). All access + to d_flags must be protected by it. + +3. For a hashed dentry, checking of d_count needs to be protected by + d_lock. + + +Papers and other documentation on dcache locking +================================================ + +1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124). + +2. http://lse.sourceforge.net/locking/dcache/dcache.html + + + diff --git a/Documentation/filesystems/devfs/README b/Documentation/filesystems/devfs/README index 54366ec..aabfba2 100644 --- a/Documentation/filesystems/devfs/README +++ b/Documentation/filesystems/devfs/README @@ -1812,11 +1812,6 @@ it may overflow the messages buffer, but try to get as much of it as you can -if you get an Oops, run ksymoops to decode it so that the -names of the offending functions are provided. A non-decoded Oops is -pretty useless - - send a copy of your devfsd configuration file(s) send the bug report to me first. diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt index d16334e..3dd2872 100644 --- a/Documentation/filesystems/ext2.txt +++ b/Documentation/filesystems/ext2.txt @@ -17,8 +17,6 @@ set using tune2fs(8). Kernel-determined defaults are indicated by (*). bsddf (*) Makes `df' act like BSD. minixdf Makes `df' act like Minix. -check Check block and inode bitmaps at mount time - (requires CONFIG_EXT2_CHECK). check=none, nocheck (*) Don't do extra checking of bitmaps on mount (check=normal and check=strict options removed) @@ -371,9 +369,8 @@ The kernel source file:/usr/src/linux/fs/ext2/ e2fsprogs (e2fsck) http://e2fsprogs.sourceforge.net/ Design & Implementation http://e2fsprogs.sourceforge.net/ext2intro.html Journaling (ext3) ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/ -Hashed Directories http://kernelnewbies.org/~phillips/htree/ Filesystem Resizing http://ext2resize.sourceforge.net/ -Compression (*) http://www.netspace.net.au/~reiter/e2compr/ +Compression (*) http://e2compr.sourceforge.net/ Implementations for: Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index a5fbc8e..614de31 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -50,9 +50,14 @@ userspace utilities, etc. Features ======== -- This is a complete rewrite of the NTFS driver that used to be in the kernel. - This new driver implements NTFS read support and is functionally equivalent - to the old ntfs driver. +- This is a complete rewrite of the NTFS driver that used to be in the 2.4 and + earlier kernels. This new driver implements NTFS read support and is + functionally equivalent to the old ntfs driver and it also implements limited + write support. The biggest limitation at present is that files/directories + cannot be created or deleted. See below for the list of write features that + are so far supported. Another limitation is that writing to compressed files + is not implemented at all. Also, neither read nor write access to encrypted + files is so far implemented. - The new driver has full support for sparse files on NTFS 3.x volumes which the old driver isn't happy with. - The new driver supports execution of binaries due to mmap() now being @@ -78,7 +83,20 @@ Features - The new driver supports fsync(2), fdatasync(2), and msync(2). - The new driver supports readv(2) and writev(2). - The new driver supports access time updates (including mtime and ctime). - +- The new driver supports truncate(2) and open(2) with O_TRUNC. But at present + only very limited support for highly fragmented files, i.e. ones which have + their data attribute split across multiple extents, is included. Another + limitation is that at present truncate(2) will never create sparse files, + since to mark a file sparse we need to modify the directory entry for the + file and we do not implement directory modifications yet. +- The new driver supports write(2) which can both overwrite existing data and + extend the file size so that you can write beyond the existing data. Also, + writing into sparse regions is supported and the holes are filled in with + clusters. But at present only limited support for highly fragmented files, + i.e. ones which have their data attribute split across multiple extents, is + included. Another limitation is that write(2) will never create sparse + files, since to mark a file sparse we need to modify the directory entry for + the file and we do not implement directory modifications yet. Supported mount options ======================= @@ -439,6 +457,22 @@ ChangeLog Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog. +2.1.25: + - Write support is now extended with write(2) being able to both + overwrite existing file data and to extend files. Also, if a write + to a sparse region occurs, write(2) will fill in the hole. Note, + mmap(2) based writes still do not support writing into holes or + writing beyond the initialized size. + - Write support has a new feature and that is that truncate(2) and + open(2) with O_TRUNC are now implemented thus files can be both made + smaller and larger. + - Note: Both write(2) and truncate(2)/open(2) with O_TRUNC still have + limitations in that they + - only provide limited support for highly fragmented files. + - only work on regular, i.e. uncompressed and unencrypted files. + - never create sparse files although this will change once directory + operations are implemented. + - Lots of bug fixes and enhancements across the board. 2.1.24: - Support journals ($LogFile) which have been modified by chkdsk. This means users can boot into Windows after we marked the volume dirty. diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt new file mode 100644 index 0000000..b3404a0 --- /dev/null +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt @@ -0,0 +1,195 @@ +ramfs, rootfs and initramfs +October 17, 2005 +Rob Landley <rob@landley.net> +============================= + +What is ramfs? +-------------- + +Ramfs is a very simple filesystem that exports Linux's disk caching +mechanisms (the page cache and dentry cache) as a dynamically resizable +ram-based filesystem. + +Normally all files are cached in memory by Linux. Pages of data read from +backing store (usually the block device the filesystem is mounted on) are kept +around in case it's needed again, but marked as clean (freeable) in case the +Virtual Memory system needs the memory for something else. Similarly, data +written to files is marked clean as soon as it has been written to backing +store, but kept around for caching purposes until the VM reallocates the +memory. A similar mechanism (the dentry cache) greatly speeds up access to +directories. + +With ramfs, there is no backing store. Files written into ramfs allocate +dentries and page cache as usual, but there's nowhere to write them to. +This means the pages are never marked clean, so they can't be freed by the +VM when it's looking to recycle memory. + +The amount of code required to implement ramfs is tiny, because all the +work is done by the existing Linux caching infrastructure. Basically, +you're mounting the disk cache as a filesystem. Because of this, ramfs is not +an optional component removable via menuconfig, since there would be negligible +space savings. + +ramfs and ramdisk: +------------------ + +The older "ram disk" mechanism created a synthetic block device out of +an area of ram and used it as backing store for a filesystem. This block +device was of fixed size, so the filesystem mounted on it was of fixed +size. Using a ram disk also required unnecessarily copying memory from the +fake block device into the page cache (and copying changes back out), as well +as creating and destroying dentries. Plus it needed a filesystem driver +(such as ext2) to format and interpret this data. + +Compared to ramfs, this wastes memory (and memory bus bandwidth), creates +unnecessary work for the CPU, and pollutes the CPU caches. (There are tricks +to avoid this copying by playing with the page tables, but they're unpleasantly +complicated and turn out to be about as expensive as the copying anyway.) +More to the point, all the work ramfs is doing has to happen _anyway_, +since all file access goes through the page and dentry caches. The ram +disk is simply unnecessary, ramfs is internally much simpler. + +Another reason ramdisks are semi-obsolete is that the introduction of +loopback devices offered a more flexible and convenient way to create +synthetic block devices, now from files instead of from chunks of memory. +See losetup (8) for details. + +ramfs and tmpfs: +---------------- + +One downside of ramfs is you can keep writing data into it until you fill +up all memory, and the VM can't free it because the VM thinks that files +should get written to backing store (rather than swap space), but ramfs hasn't +got any backing store. Because of this, only root (or a trusted user) should +be allowed write access to a ramfs mount. + +A ramfs derivative called tmpfs was created to add size limits, and the ability +to write the data to swap space. Normal users can be allowed write access to +tmpfs mounts. See Documentation/filesystems/tmpfs.txt for more information. + +What is rootfs? +--------------- + +Rootfs is a special instance of ramfs, which is always present in 2.6 systems. +(It's used internally as the starting and stopping point for searches of the +kernel's doubly-linked list of mount points.) + +Most systems just mount another filesystem over it and ignore it. The +amount of space an empty instance of ramfs takes up is tiny. + +What is initramfs? +------------------ + +All 2.6 Linux kernels contain a gzipped "cpio" format archive, which is +extracted into rootfs when the kernel boots up. After extracting, the kernel +checks to see if rootfs contains a file "init", and if so it executes it as PID +1. If found, this init process is responsible for bringing the system the +rest of the way up, including locating and mounting the real root device (if +any). If rootfs does not contain an init program after the embedded cpio +archive is extracted into it, the kernel will fall through to the older code +to locate and mount a root partition, then exec some variant of /sbin/init +out of that. + +All this differs from the old initrd in several ways: + + - The old initrd was a separate file, while the initramfs archive is linked + into the linux kernel image. (The directory linux-*/usr is devoted to + generating this archive during the build.) + + - The old initrd file was a gzipped filesystem image (in some file format, + such as ext2, that had to be built into the kernel), while the new + initramfs archive is a gzipped cpio archive (like tar only simpler, + see cpio(1) and Documentation/early-userspace/buffer-format.txt). + + - The program run by the old initrd (which was called /initrd, not /init) did + some setup and then returned to the kernel, while the init program from + initramfs is not expected to return to the kernel. (If /init needs to hand + off control it can overmount / with a new root device and exec another init + program. See the switch_root utility, below.) + + - When switching another root device, initrd would pivot_root and then + umount the ramdisk. But initramfs is rootfs: you can neither pivot_root + rootfs, nor unmount it. Instead delete everything out of rootfs to + free up the space (find -xdev / -exec rm '{}' ';'), overmount rootfs + with the new root (cd /newmount; mount --move . /; chroot .), attach + stdin/stdout/stderr to the new /dev/console, and exec the new init. + + Since this is a remarkably persnickity process (and involves deleting + commands before you can run them), the klibc package introduced a helper + program (utils/run_init.c) to do all this for you. Most other packages + (such as busybox) have named this command "switch_root". + +Populating initramfs: +--------------------- + +The 2.6 kernel build process always creates a gzipped cpio format initramfs +archive and links it into the resulting kernel binary. By default, this +archive is empty (consuming 134 bytes on x86). The config option +CONFIG_INITRAMFS_SOURCE (for some reason buried under devices->block devices +in menuconfig, and living in usr/Kconfig) can be used to specify a source for +the initramfs archive, which will automatically be incorporated into the +resulting binary. This option can point to an existing gzipped cpio archive, a +directory containing files to be archived, or a text file specification such +as the following example: + + dir /dev 755 0 0 + nod /dev/console 644 0 0 c 5 1 + nod /dev/loop0 644 0 0 b 7 0 + dir /bin 755 1000 1000 + slink /bin/sh busybox 777 0 0 + file /bin/busybox initramfs/busybox 755 0 0 + dir /proc 755 0 0 + dir /sys 755 0 0 + dir /mnt 755 0 0 + file /init initramfs/init.sh 755 0 0 + +One advantage of the text file is that root access is not required to +set permissions or create device nodes in the new archive. (Note that those +two example "file" entries expect to find files named "init.sh" and "busybox" in +a directory called "initramfs", under the linux-2.6.* directory. See +Documentation/early-userspace/README for more details.) + +If you don't already understand what shared libraries, devices, and paths +you need to get a minimal root filesystem up and running, here are some +references: +http://www.tldp.org/HOWTO/Bootdisk-HOWTO/ +http://www.tldp.org/HOWTO/From-PowerUp-To-Bash-Prompt-HOWTO.html +http://www.linuxfromscratch.org/lfs/view/stable/ + +The "klibc" package (http://www.kernel.org/pub/linux/libs/klibc) is +designed to be a tiny C library to statically link early userspace +code against, along with some related utilities. It is BSD licensed. + +I use uClibc (http://www.uclibc.org) and busybox (http://www.busybox.net) +myself. These are LGPL and GPL, respectively. + +In theory you could use glibc, but that's not well suited for small embedded +uses like this. (A "hello world" program statically linked against glibc is +over 400k. With uClibc it's 7k. Also note that glibc dlopens libnss to do +name lookups, even when otherwise statically linked.) + +Future directions: +------------------ + +Today (2.6.14), initramfs is always compiled in, but not always used. The +kernel falls back to legacy boot code that is reached only if initramfs does +not contain an /init program. The fallback is legacy code, there to ensure a +smooth transition and allowing early boot functionality to gradually move to +"early userspace" (I.E. initramfs). + +The move to early userspace is necessary because finding and mounting the real +root device is complex. Root partitions can span multiple devices (raid or +separate journal). They can be out on the network (requiring dhcp, setting a +specific mac address, logging into a server, etc). They can live on removable +media, with dynamically allocated major/minor numbers and persistent naming +issues requiring a full udev implementation to sort out. They can be +compressed, encrypted, copy-on-write, loopback mounted, strangely partitioned, +and so on. + +This kind of complexity (which inevitably includes policy) is rightly handled +in userspace. Both klibc and busybox/uClibc are working on simple initramfs +packages to drop into a kernel build, and when standard solutions are ready +and widely deployed, the kernel's legacy early boot code will become obsolete +and a candidate for the feature removal schedule. + +But that's a while off yet. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index f042c12..ee4c0a8 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -3,7 +3,7 @@ Original author: Richard Gooch <rgooch@atnf.csiro.au> - Last updated on August 25, 2005 + Last updated on October 28, 2005 Copyright (C) 1999 Richard Gooch Copyright (C) 2005 Pekka Enberg @@ -11,62 +11,61 @@ This file is released under the GPLv2. -What is it? -=========== +Introduction +============ -The Virtual File System (otherwise known as the Virtual Filesystem -Switch) is the software layer in the kernel that provides the -filesystem interface to userspace programs. It also provides an -abstraction within the kernel which allows different filesystem -implementations to coexist. +The Virtual File System (also known as the Virtual Filesystem Switch) +is the software layer in the kernel that provides the filesystem +interface to userspace programs. It also provides an abstraction +within the kernel which allows different filesystem implementations to +coexist. +VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so +on are called from a process context. Filesystem locking is described +in the document Documentation/filesystems/Locking. -A Quick Look At How It Works -============================ -In this section I'll briefly describe how things work, before -launching into the details. I'll start with describing what happens -when user programs open and manipulate files, and then look from the -other view which is how a filesystem is supported and subsequently -mounted. - - -Opening a File --------------- - -The VFS implements the open(2), stat(2), chmod(2) and similar system -calls. The pathname argument is used by the VFS to search through the -directory entry cache (dentry cache or "dcache"). This provides a very -fast look-up mechanism to translate a pathname (filename) into a -specific dentry. - -An individual dentry usually has a pointer to an inode. Inodes are the -things that live on disc drives, and can be regular files (you know: -those things that you write data into), directories, FIFOs and other -beasts. Dentries live in RAM and are never saved to disc: they exist -only for performance. Inodes live on disc and are copied into memory -when required. Later any changes are written back to disc. The inode -that lives in RAM is a VFS inode, and it is this which the dentry -points to. A single inode can be pointed to by multiple dentries -(think about hardlinks). - -The dcache is meant to be a view into your entire filespace. Unlike -Linus, most of us losers can't fit enough dentries into RAM to cover -all of our filespace, so the dcache has bits missing. In order to -resolve your pathname into a dentry, the VFS may have to resort to -creating dentries along the way, and then loading the inode. This is -done by looking up the inode. - -To look up an inode (usually read from disc) requires that the VFS -calls the lookup() method of the parent directory inode. This method -is installed by the specific filesystem implementation that the inode -lives in. There will be more on this later. +Directory Entry Cache (dcache) +------------------------------ -Once the VFS has the required dentry (and hence the inode), we can do -all those boring things like open(2) the file, or stat(2) it to peek -at the inode data. The stat(2) operation is fairly simple: once the -VFS has the dentry, it peeks at the inode data and passes some of it -back to userspace. +The VFS implements the open(2), stat(2), chmod(2), and similar system +calls. The pathname argument that is passed to them is used by the VFS +to search through the directory entry cache (also known as the dentry +cache or dcache). This provides a very fast look-up mechanism to +translate a pathname (filename) into a specific dentry. Dentries live +in RAM and are never saved to disc: they exist only for performance. + +The dentry cache is meant to be a view into your entire filespace. As +most computers cannot fit all dentries in the RAM at the same time, +some bits of the cache are missing. In order to resolve your pathname +into a dentry, the VFS may have to resort to creating dentries along +the way, and then loading the inode. This is done by looking up the +inode. + + +The Inode Object +---------------- + +An individual dentry usually has a pointer to an inode. Inodes are +filesystem objects such as regular files, directories, FIFOs and other +beasts. They live either on the disc (for block device filesystems) +or in the memory (for pseudo filesystems). Inodes that live on the +disc are copied into the memory when required and changes to the inode +are written back to disc. A single inode can be pointed to by multiple +dentries (hard links, for example, do this). + +To look up an inode requires that the VFS calls the lookup() method of +the parent directory inode. This method is installed by the specific +filesystem implementation that the inode lives in. Once the VFS has +the required dentry (and hence the inode), we can do all those boring +things like open(2) the file, or stat(2) it to peek at the inode +data. The stat(2) operation is fairly simple: once the VFS has the +dentry, it peeks at the inode data and passes some of it back to +userspace. + + +The File Object +--------------- Opening a file requires another operation: allocation of a file structure (this is the kernel-side implementation of file @@ -74,51 +73,39 @@ descriptors). The freshly allocated file structure is initialized with a pointer to the dentry and a set of file operation member functions. These are taken from the inode data. The open() file method is then called so the specific filesystem implementation can do it's work. You -can see that this is another switch performed by the VFS. - -The file structure is placed into the file descriptor table for the -process. +can see that this is another switch performed by the VFS. The file +structure is placed into the file descriptor table for the process. Reading, writing and closing files (and other assorted VFS operations) is done by using the userspace file descriptor to grab the appropriate -file structure, and then calling the required file structure method -function to do whatever is required. - -For as long as the file is open, it keeps the dentry "open" (in use), -which in turn means that the VFS inode is still in use. - -All VFS system calls (i.e. open(2), stat(2), read(2), write(2), -chmod(2) and so on) are called from a process context. You should -assume that these calls are made without any kernel locks being -held. This means that the processes may be executing the same piece of -filesystem or driver code at the same time, on different -processors. You should ensure that access to shared resources is -protected by appropriate locks. +file structure, and then calling the required file structure method to +do whatever is required. For as long as the file is open, it keeps the +dentry in use, which in turn means that the VFS inode is still in use. Registering and Mounting a Filesystem -------------------------------------- +===================================== -If you want to support a new kind of filesystem in the kernel, all you -need to do is call register_filesystem(). You pass a structure -describing the filesystem implementation (struct file_system_type) -which is then added to an internal table of supported filesystems. You -can do: +To register and unregister a filesystem, use the following API +functions: -% cat /proc/filesystems + #include <linux/fs.h> -to see what filesystems are currently available on your system. + extern int register_filesystem(struct file_system_type *); + extern int unregister_filesystem(struct file_system_type *); -When a request is made to mount a block device onto a directory in -your filespace the VFS will call the appropriate method for the -specific filesystem. The dentry for the mount point will then be -updated to point to the root inode for the new filesystem. +The passed struct file_system_type describes your filesystem. When a +request is made to mount a device onto a directory in your filespace, +the VFS will call the appropriate get_sb() method for the specific +filesystem. The dentry for the mount point will then be updated to +point to the root inode for the new filesystem. -It's now time to look at things in more detail. +You can see all filesystems that are registered to the kernel in the +file /proc/filesystems. struct file_system_type -======================= +----------------------- This describes the filesystem. As of kernel 2.6.13, the following members are defined: @@ -197,8 +184,14 @@ A fill_super() method implementation has the following arguments: int silent: whether or not to be silent on error +The Superblock Object +===================== + +A superblock object represents a mounted filesystem. + + struct super_operations -======================= +----------------------- This describes how the VFS can manipulate the superblock of your filesystem. As of kernel 2.6.13, the following members are defined: @@ -286,9 +279,9 @@ or bottom half). a superblock. The second parameter indicates whether the method should wait until the write out has been completed. Optional. - write_super_lockfs: called when VFS is locking a filesystem and forcing - it into a consistent state. This function is currently used by the - Logical Volume Manager (LVM). + write_super_lockfs: called when VFS is locking a filesystem and + forcing it into a consistent state. This method is currently + used by the Logical Volume Manager (LVM). unlockfs: called when VFS is unlocking a filesystem and making it writable again. @@ -317,8 +310,14 @@ field. This is a pointer to a "struct inode_operations" which describes the methods that can be performed on individual inodes. +The Inode Object +================ + +An inode object represents an object within the filesystem. + + struct inode_operations -======================= +----------------------- This describes how the VFS can manipulate an inode in your filesystem. As of kernel 2.6.13, the following members are defined: @@ -394,51 +393,62 @@ otherwise noted. will probably need to call d_instantiate() just as you would in the create() method + rename: called by the rename(2) system call to rename the object to + have the parent and name given by the second inode and dentry. + readlink: called by the readlink(2) system call. Only required if you want to support reading symbolic links follow_link: called by the VFS to follow a symbolic link to the inode it points to. Only required if you want to support - symbolic links. This function returns a void pointer cookie + symbolic links. This method returns a void pointer cookie that is passed to put_link(). put_link: called by the VFS to release resources allocated by - follow_link(). The cookie returned by follow_link() is passed to - to this function as the last parameter. It is used by filesystems - such as NFS where page cache is not stable (i.e. page that was - installed when the symbolic link walk started might not be in the - page cache at the end of the walk). - - truncate: called by the VFS to change the size of a file. The i_size - field of the inode is set to the desired size by the VFS before - this function is called. This function is called by the truncate(2) - system call and related functionality. + follow_link(). The cookie returned by follow_link() is passed + to to this method as the last parameter. It is used by + filesystems such as NFS where page cache is not stable + (i.e. page that was installed when the symbolic link walk + started might not be in the page cache at the end of the + walk). + + truncate: called by the VFS to change the size of a file. The + i_size field of the inode is set to the desired size by the + VFS before this method is called. This method is called by + the truncate(2) system call and related functionality. permission: called by the VFS to check for access rights on a POSIX-like filesystem. - setattr: called by the VFS to set attributes for a file. This function is - called by chmod(2) and related system calls. + setattr: called by the VFS to set attributes for a file. This method + is called by chmod(2) and related system calls. - getattr: called by the VFS to get attributes of a file. This function is - called by stat(2) and related system calls. + getattr: called by the VFS to get attributes of a file. This method + is called by stat(2) and related system calls. setxattr: called by the VFS to set an extended attribute for a file. - Extended attribute is a name:value pair associated with an inode. This - function is called by setxattr(2) system call. + Extended attribute is a name:value pair associated with an + inode. This method is called by setxattr(2) system call. + + getxattr: called by the VFS to retrieve the value of an extended + attribute name. This method is called by getxattr(2) function + call. - getxattr: called by the VFS to retrieve the value of an extended attribute - name. This function is called by getxattr(2) function call. + listxattr: called by the VFS to list all extended attributes for a + given file. This method is called by listxattr(2) system call. - listxattr: called by the VFS to list all extended attributes for a given - file. This function is called by listxattr(2) system call. + removexattr: called by the VFS to remove an extended attribute from + a file. This method is called by removexattr(2) system call. - removexattr: called by the VFS to remove an extended attribute from a file. - This function is called by removexattr(2) system call. + +The Address Space Object +======================== + +The address space object is used to identify pages in the page cache. struct address_space_operations -=============================== +------------------------------- This describes how the VFS can manipulate mapping of a file to page cache in your filesystem. As of kernel 2.6.13, the following members are defined: @@ -502,8 +512,14 @@ struct address_space_operations { it. An example implementation can be found in fs/ext2/xip.c. +The File Object +=============== + +A file object represents a file opened by a process. + + struct file_operations -====================== +---------------------- This describes how the VFS can manipulate an open file. As of kernel 2.6.13, the following members are defined: @@ -661,7 +677,7 @@ of child dentries. Child dentries are basically like files in a directory. -Directory Entry Cache APIs +Directory Entry Cache API -------------------------- There are a number of functions defined which permit a filesystem to @@ -705,178 +721,24 @@ manipulate dentries: and the dentry is returned. The caller must use d_put() to free the dentry when it finishes using it. +For further information on dentry locking, please refer to the document +Documentation/filesystems/dentry-locking.txt. -RCU-based dcache locking model ------------------------------- -On many workloads, the most common operation on dcache is -to look up a dentry, given a parent dentry and the name -of the child. Typically, for every open(), stat() etc., -the dentry corresponding to the pathname will be looked -up by walking the tree starting with the first component -of the pathname and using that dentry along with the next -component to look up the next level and so on. Since it -is a frequent operation for workloads like multiuser -environments and web servers, it is important to optimize -this path. - -Prior to 2.5.10, dcache_lock was acquired in d_lookup and thus -in every component during path look-up. Since 2.5.10 onwards, -fast-walk algorithm changed this by holding the dcache_lock -at the beginning and walking as many cached path component -dentries as possible. This significantly decreases the number -of acquisition of dcache_lock. However it also increases the -lock hold time significantly and affects performance in large -SMP machines. Since 2.5.62 kernel, dcache has been using -a new locking model that uses RCU to make dcache look-up -lock-free. - -The current dcache locking model is not very different from the existing -dcache locking model. Prior to 2.5.62 kernel, dcache_lock -protected the hash chain, d_child, d_alias, d_lru lists as well -as d_inode and several other things like mount look-up. RCU-based -changes affect only the way the hash chain is protected. For everything -else the dcache_lock must be taken for both traversing as well as -updating. The hash chain updates too take the dcache_lock. -The significant change is the way d_lookup traverses the hash chain, -it doesn't acquire the dcache_lock for this and rely on RCU to -ensure that the dentry has not been *freed*. - - -Dcache locking details ----------------------- +Resources +========= + +(Note some of these resources are not up-to-date with the latest kernel + version.) + +Creating Linux virtual filesystems. 2002 + <http://lwn.net/Articles/13325/> + +The Linux Virtual File-system Layer by Neil Brown. 1999 + <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html> + +A tour of the Linux VFS by Michael K. Johnson. 1996 + <http://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html> -For many multi-user workloads, open() and stat() on files are -very frequently occurring operations. Both involve walking -of path names to find the dentry corresponding to the -concerned file. In 2.4 kernel, dcache_lock was held -during look-up of each path component. Contention and -cache-line bouncing of this global lock caused significant -scalability problems. With the introduction of RCU -in Linux kernel, this was worked around by making -the look-up of path components during path walking lock-free. - - -Safe lock-free look-up of dcache hash table -=========================================== - -Dcache is a complex data structure with the hash table entries -also linked together in other lists. In 2.4 kernel, dcache_lock -protected all the lists. We applied RCU only on hash chain -walking. The rest of the lists are still protected by dcache_lock. -Some of the important changes are : - -1. The deletion from hash chain is done using hlist_del_rcu() macro which - doesn't initialize next pointer of the deleted dentry and this - allows us to walk safely lock-free while a deletion is happening. - -2. Insertion of a dentry into the hash table is done using - hlist_add_head_rcu() which take care of ordering the writes - - the writes to the dentry must be visible before the dentry - is inserted. This works in conjunction with hlist_for_each_rcu() - while walking the hash chain. The only requirement is that - all initialization to the dentry must be done before hlist_add_head_rcu() - since we don't have dcache_lock protection while traversing - the hash chain. This isn't different from the existing code. - -3. The dentry looked up without holding dcache_lock by cannot be - returned for walking if it is unhashed. It then may have a NULL - d_inode or other bogosity since RCU doesn't protect the other - fields in the dentry. We therefore use a flag DCACHE_UNHASHED to - indicate unhashed dentries and use this in conjunction with a - per-dentry lock (d_lock). Once looked up without the dcache_lock, - we acquire the per-dentry lock (d_lock) and check if the - dentry is unhashed. If so, the look-up is failed. If not, the - reference count of the dentry is increased and the dentry is returned. - -4. Once a dentry is looked up, it must be ensured during the path - walk for that component it doesn't go away. In pre-2.5.10 code, - this was done holding a reference to the dentry. dcache_rcu does - the same. In some sense, dcache_rcu path walking looks like - the pre-2.5.10 version. - -5. All dentry hash chain updates must take the dcache_lock as well as - the per-dentry lock in that order. dput() does this to ensure - that a dentry that has just been looked up in another CPU - doesn't get deleted before dget() can be done on it. - -6. There are several ways to do reference counting of RCU protected - objects. One such example is in ipv4 route cache where - deferred freeing (using call_rcu()) is done as soon as - the reference count goes to zero. This cannot be done in - the case of dentries because tearing down of dentries - require blocking (dentry_iput()) which isn't supported from - RCU callbacks. Instead, tearing down of dentries happen - synchronously in dput(), but actual freeing happens later - when RCU grace period is over. This allows safe lock-free - walking of the hash chains, but a matched dentry may have - been partially torn down. The checking of DCACHE_UNHASHED - flag with d_lock held detects such dentries and prevents - them from being returned from look-up. - - -Maintaining POSIX rename semantics -================================== - -Since look-up of dentries is lock-free, it can race against -a concurrent rename operation. For example, during rename -of file A to B, look-up of either A or B must succeed. -So, if look-up of B happens after A has been removed from the -hash chain but not added to the new hash chain, it may fail. -Also, a comparison while the name is being written concurrently -by a rename may result in false positive matches violating -rename semantics. Issues related to race with rename are -handled as described below : - -1. Look-up can be done in two ways - d_lookup() which is safe - from simultaneous renames and __d_lookup() which is not. - If __d_lookup() fails, it must be followed up by a d_lookup() - to correctly determine whether a dentry is in the hash table - or not. d_lookup() protects look-ups using a sequence - lock (rename_lock). - -2. The name associated with a dentry (d_name) may be changed if - a rename is allowed to happen simultaneously. To avoid memcmp() - in __d_lookup() go out of bounds due to a rename and false - positive comparison, the name comparison is done while holding the - per-dentry lock. This prevents concurrent renames during this - operation. - -3. Hash table walking during look-up may move to a different bucket as - the current dentry is moved to a different bucket due to rename. - But we use hlists in dcache hash table and they are null-terminated. - So, even if a dentry moves to a different bucket, hash chain - walk will terminate. [with a list_head list, it may not since - termination is when the list_head in the original bucket is reached]. - Since we redo the d_parent check and compare name while holding - d_lock, lock-free look-up will not race against d_move(). - -4. There can be a theoretical race when a dentry keeps coming back - to original bucket due to double moves. Due to this look-up may - consider that it has never moved and can end up in a infinite loop. - But this is not any worse that theoretical livelocks we already - have in the kernel. - - -Important guidelines for filesystem developers related to dcache_rcu -==================================================================== - -1. Existing dcache interfaces (pre-2.5.62) exported to filesystem - don't change. Only dcache internal implementation changes. However - filesystems *must not* delete from the dentry hash chains directly - using the list macros like allowed earlier. They must use dcache - APIs like d_drop() or __d_drop() depending on the situation. - -2. d_flags is now protected by a per-dentry lock (d_lock). All - access to d_flags must be protected by it. - -3. For a hashed dentry, checking of d_count needs to be protected - by d_lock. - - -Papers and other documentation on dcache locking -================================================ - -1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124). - -2. http://lse.sourceforge.net/locking/dcache/dcache.html +A small trail through the Linux kernel by Andries Brouwer. 2001 + <http://www.win.tue.nl/~aeb/linux/vfs/trail.html> diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index c7d5d0c..74aeb14 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -19,15 +19,43 @@ Mount Options When mounting an XFS filesystem, the following options are accepted. - biosize=size - Sets the preferred buffered I/O size (default size is 64K). - "size" must be expressed as the logarithm (base2) of the - desired I/O size. - Valid values for this option are 14 through 16, inclusive - (i.e. 16K, 32K, and 64K bytes). On machines with a 4K - pagesize, 13 (8K bytes) is also a valid size. - The preferred buffered I/O size can also be altered on an - individual file basis using the ioctl(2) system call. + allocsize=size + Sets the buffered I/O end-of-file preallocation size when + doing delayed allocation writeout (default size is 64KiB). + Valid values for this option are page size (typically 4KiB) + through to 1GiB, inclusive, in power-of-2 increments. + + attr2/noattr2 + The options enable/disable (default is disabled for backward + compatibility on-disk) an "opportunistic" improvement to be + made in the way inline extended attributes are stored on-disk. + When the new form is used for the first time (by setting or + removing extended attributes) the on-disk superblock feature + bit field will be updated to reflect this format being in use. + + barrier + Enables the use of block layer write barriers for writes into + the journal and unwritten extent conversion. This allows for + drive level write caching to be enabled, for devices that + support write barriers. + + dmapi + Enable the DMAPI (Data Management API) event callouts. + Use with the "mtpt" option. + + grpid/bsdgroups and nogrpid/sysvgroups + These options define what group ID a newly created file gets. + When grpid is set, it takes the group ID of the directory in + which it is created; otherwise (the default) it takes the fsgid + of the current process, unless the directory has the setgid bit + set, in which case it takes the gid from the parent directory, + and also gets the setgid bit set if it is a directory itself. + + ihashsize=value + Sets the number of hash buckets available for hashing the + in-memory inodes of the specified mount point. If a value + of zero is used, the value selected by the default algorithm + will be displayed in /proc/mounts. ikeep/noikeep When inode clusters are emptied of inodes, keep them around @@ -35,12 +63,31 @@ When mounting an XFS filesystem, the following options are accepted. and is still the default for now. Using the noikeep option, inode clusters are returned to the free space pool. + inode64 + Indicates that XFS is allowed to create inodes at any location + in the filesystem, including those which will result in inode + numbers occupying more than 32 bits of significance. This is + provided for backwards compatibility, but causes problems for + backup applications that cannot handle large inode numbers. + + largeio/nolargeio + If "nolargeio" is specified, the optimal I/O reported in + st_blksize by stat(2) will be as small as possible to allow user + applications to avoid inefficient read/modify/write I/O. + If "largeio" specified, a filesystem that has a "swidth" specified + will return the "swidth" value (in bytes) in st_blksize. If the + filesystem does not have a "swidth" specified but does specify + an "allocsize" then "allocsize" (in bytes) will be returned + instead. + If neither of these two options are specified, then filesystem + will behave as if "nolargeio" was specified. + logbufs=value Set the number of in-memory log buffers. Valid numbers range from 2-8 inclusive. The default value is 8 buffers for filesystems with a - blocksize of 64K, 4 buffers for filesystems with a blocksize - of 32K, 3 buffers for filesystems with a blocksize of 16K + blocksize of 64KiB, 4 buffers for filesystems with a blocksize + of 32KiB, 3 buffers for filesystems with a blocksize of 16KiB and 2 buffers for all other configurations. Increasing the number of buffers may increase performance on some workloads at the cost of the memory used for the additional log buffers @@ -49,10 +96,10 @@ When mounting an XFS filesystem, the following options are accepted. logbsize=value Set the size of each in-memory log buffer. Size may be specified in bytes, or in kilobytes with a "k" suffix. - Valid sizes for version 1 and version 2 logs are 16384 (16k) and - 32768 (32k). Valid sizes for version 2 logs also include + Valid sizes for version 1 and version 2 logs are 16384 (16k) and + 32768 (32k). Valid sizes for version 2 logs also include 65536 (64k), 131072 (128k) and 262144 (256k). - The default value for machines with more than 32MB of memory + The default value for machines with more than 32MiB of memory is 32768, machines with less memory use 16384 by default. logdev=device and rtdev=device @@ -62,6 +109,11 @@ When mounting an XFS filesystem, the following options are accepted. optional, and the log section can be separate from the data section or contained within it. + mtpt=mountpoint + Use with the "dmapi" option. The value specified here will be + included in the DMAPI mount event, and should be the path of + the actual mountpoint that is used. + noalign Data allocations will not be aligned at stripe unit boundaries. @@ -91,13 +143,17 @@ When mounting an XFS filesystem, the following options are accepted. O_SYNC writes can be lost if the system crashes. If timestamp updates are critical, use the osyncisosync option. - quota/usrquota/uqnoenforce + uquota/usrquota/uqnoenforce/quota User disk quota accounting enabled, and limits (optionally) - enforced. + enforced. Refer to xfs_quota(8) for further details. - grpquota/gqnoenforce + gquota/grpquota/gqnoenforce Group disk quota accounting enabled and limits (optionally) - enforced. + enforced. Refer to xfs_quota(8) for further details. + + pquota/prjquota/pqnoenforce + Project disk quota accounting enabled and limits (optionally) + enforced. Refer to xfs_quota(8) for further details. sunit=value and swidth=value Used to specify the stripe unit and width for a RAID device or @@ -113,15 +169,21 @@ When mounting an XFS filesystem, the following options are accepted. The "swidth" option is required if the "sunit" option has been specified, and must be a multiple of the "sunit" value. + swalloc + Data allocations will be rounded up to stripe width boundaries + when the current end of file is being extended and the file + size is larger than the stripe width size. + + sysctls ======= The following sysctls are available for the XFS filesystem: fs.xfs.stats_clear (Min: 0 Default: 0 Max: 1) - Setting this to "1" clears accumulated XFS statistics + Setting this to "1" clears accumulated XFS statistics in /proc/fs/xfs/stat. It then immediately resets to "0". - + fs.xfs.xfssyncd_centisecs (Min: 100 Default: 3000 Max: 720000) The interval at which the xfssyncd thread flushes metadata out to disk. This thread will flush log activity out, and @@ -143,9 +205,9 @@ The following sysctls are available for the XFS filesystem: XFS_ERRLEVEL_HIGH: 5 fs.xfs.panic_mask (Min: 0 Default: 0 Max: 127) - Causes certain error conditions to call BUG(). Value is a bitmask; + Causes certain error conditions to call BUG(). Value is a bitmask; AND together the tags which represent errors which should cause panics: - + XFS_NO_PTAG 0 XFS_PTAG_IFLUSH 0x00000001 XFS_PTAG_LOGRES 0x00000002 @@ -155,7 +217,7 @@ The following sysctls are available for the XFS filesystem: XFS_PTAG_SHUTDOWN_IOERROR 0x00000020 XFS_PTAG_SHUTDOWN_LOGERROR 0x00000040 - This option is intended for debugging only. + This option is intended for debugging only. fs.xfs.irix_symlink_mode (Min: 0 Default: 0 Max: 1) Controls whether symlinks are created with mode 0777 (default) @@ -164,25 +226,37 @@ The following sysctls are available for the XFS filesystem: fs.xfs.irix_sgid_inherit (Min: 0 Default: 0 Max: 1) Controls files created in SGID directories. If the group ID of the new file does not match the effective group - ID or one of the supplementary group IDs of the parent dir, the - ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl + ID or one of the supplementary group IDs of the parent dir, the + ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl is set. fs.xfs.restrict_chown (Min: 0 Default: 1 Max: 1) Controls whether unprivileged users can use chown to "give away" a file to another user. - fs.xfs.inherit_sync (Min: 0 Default: 1 Max 1) - Setting this to "1" will cause the "sync" flag set - by the chattr(1) command on a directory to be + fs.xfs.inherit_sync (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "sync" flag set + by the xfs_io(8) chattr command on a directory to be inherited by files in that directory. - fs.xfs.inherit_nodump (Min: 0 Default: 1 Max 1) - Setting this to "1" will cause the "nodump" flag set - by the chattr(1) command on a directory to be + fs.xfs.inherit_nodump (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "nodump" flag set + by the xfs_io(8) chattr command on a directory to be inherited by files in that directory. - fs.xfs.inherit_noatime (Min: 0 Default: 1 Max 1) - Setting this to "1" will cause the "noatime" flag set - by the chattr(1) command on a directory to be + fs.xfs.inherit_noatime (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "noatime" flag set + by the xfs_io(8) chattr command on a directory to be inherited by files in that directory. + + fs.xfs.inherit_nosymlinks (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "nosymlinks" flag set + by the xfs_io(8) chattr command on a directory to be + inherited by files in that directory. + + fs.xfs.rotorstep (Min: 1 Default: 1 Max: 256) + In "inode32" allocation mode, this option determines how many + files the allocator attempts to allocate in the same allocation + group before moving to the next allocation group. The intent + is to control the rate at which the allocator moves between + allocation groups when allocating extents for new files. diff --git a/Documentation/firmware_class/firmware_sample_driver.c b/Documentation/firmware_class/firmware_sample_driver.c index 4bef8c2..d3ad2c2 100644 --- a/Documentation/firmware_class/firmware_sample_driver.c +++ b/Documentation/firmware_class/firmware_sample_driver.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/string.h> #include "linux/firmware.h" diff --git a/Documentation/firmware_class/firmware_sample_firmware_class.c b/Documentation/firmware_class/firmware_sample_firmware_class.c index 09eab2f..57b956a 100644 --- a/Documentation/firmware_class/firmware_sample_firmware_class.c +++ b/Documentation/firmware_class/firmware_sample_firmware_class.c @@ -14,6 +14,8 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/timer.h> +#include <linux/slab.h> +#include <linux/string.h> #include <linux/firmware.h> diff --git a/Documentation/floppy.txt b/Documentation/floppy.txt index 6fb10fc..6ccab88 100644 --- a/Documentation/floppy.txt +++ b/Documentation/floppy.txt @@ -4,7 +4,7 @@ FAQ list: ========= A FAQ list may be found in the fdutils package (see below), and also -at http://fdutils.linux.lu/FAQ.html +at <http://fdutils.linux.lu/faq.html>. LILO configuration options (Thinkpad users, read this) @@ -217,10 +217,10 @@ It also contains additional documentation about the floppy driver. The latest version can be found at fdutils homepage: http://fdutils.linux.lu -The fdutils-5.4 release can be found at: - http://fdutils.linux.lu/fdutils-5.4.src.tar.gz - http://www.tux.org/pub/knaff/fdutils/fdutils-5.4.src.tar.gz - ftp://metalab.unc.edu/pub/Linux/utils/disk-management/fdutils-5.4.src.tar.gz +The fdutils releases can be found at: + http://fdutils.linux.lu/download.html + http://www.tux.org/pub/knaff/fdutils/ + ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ Reporting problems about the floppy driver ========================================== diff --git a/Documentation/hpet.txt b/Documentation/hpet.txt index 4e7cc8d..e524575 100644 --- a/Documentation/hpet.txt +++ b/Documentation/hpet.txt @@ -1,18 +1,21 @@ High Precision Event Timer Driver for Linux -The High Precision Event Timer (HPET) hardware is the future replacement for the 8254 and Real -Time Clock (RTC) periodic timer functionality. Each HPET can have up two 32 timers. It is possible -to configure the first two timers as legacy replacements for 8254 and RTC periodic. A specification -done by INTEL and Microsoft can be found at http://www.intel.com/labs/platcomp/hpet/hpetspec.htm. - -The driver supports detection of HPET driver allocation and initialization of the HPET before the -driver module_init routine is called. This enables platform code which uses timer 0 or 1 as the -main timer to intercept HPET initialization. An example of this initialization can be found in +The High Precision Event Timer (HPET) hardware is the future replacement +for the 8254 and Real Time Clock (RTC) periodic timer functionality. +Each HPET can have up two 32 timers. It is possible to configure the +first two timers as legacy replacements for 8254 and RTC periodic timers. +A specification done by Intel and Microsoft can be found at +<http://www.intel.com/hardwaredesign/hpetspec.htm>. + +The driver supports detection of HPET driver allocation and initialization +of the HPET before the driver module_init routine is called. This enables +platform code which uses timer 0 or 1 as the main timer to intercept HPET +initialization. An example of this initialization can be found in arch/i386/kernel/time_hpet.c. -The driver provides two APIs which are very similar to the API found in the rtc.c driver. -There is a user space API and a kernel space API. An example user space program is provided -below. +The driver provides two APIs which are very similar to the API found in +the rtc.c driver. There is a user space API and a kernel space API. +An example user space program is provided below. #include <stdio.h> #include <stdlib.h> @@ -290,9 +293,8 @@ The kernel API has three interfaces exported from the driver: hpet_unregister(struct hpet_task *tp) hpet_control(struct hpet_task *tp, unsigned int cmd, unsigned long arg) -The kernel module using this interface fills in the ht_func and ht_data members of the -hpet_task structure before calling hpet_register. hpet_control simply vectors to the hpet_ioctl -routine and has the same commands and respective arguments as the user API. hpet_unregister +The kernel module using this interface fills in the ht_func and ht_data +members of the hpet_task structure before calling hpet_register. +hpet_control simply vectors to the hpet_ioctl routine and has the same +commands and respective arguments as the user API. hpet_unregister is used to terminate usage of the HPET timer reserved by hpet_register. - - diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 0d01950..7f42e44 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -4,18 +4,18 @@ Kernel driver it87 Supported chips: * IT8705F Prefix: 'it87' - Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports) + Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/ * IT8712F Prefix: 'it8712' Addresses scanned: I2C 0x28 - 0x2f - from Super I/O config space, or default ISA 0x290 (8 I/O ports) + from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/ * SiS950 [clone of IT8705F] - Prefix: 'sis950' - Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports) + Prefix: 'it87' + Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: No longer be available Author: Christophe Gauthron <chrisg@0-in.com> diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 2c4cf39..438cb24 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -24,14 +24,14 @@ Supported chips: http://www.national.com/pf/LM/LM86.html * Analog Devices ADM1032 Prefix: 'adm1032' - Addresses scanned: I2C 0x4c + Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the Analog Devices website - http://products.analog.com/products/info.asp?product=ADM1032 + http://www.analog.com/en/prod/0,2877,ADM1032,00.html * Analog Devices ADT7461 Prefix: 'adt7461' - Addresses scanned: I2C 0x4c + Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the Analog Devices website - http://products.analog.com/products/info.asp?product=ADT7461 + http://www.analog.com/en/prod/0,2877,ADT7461,00.html Note: Only if in ADM1032 compatibility mode * Maxim MAX6657 Prefix: 'max6657' @@ -71,8 +71,8 @@ increased resolution of the remote temperature measurement. The different chipsets of the family are not strictly identical, although very similar. This driver doesn't handle any specific feature for now, -but could if there ever was a need for it. For reference, here comes a -non-exhaustive list of specific features: +with the exception of SMBus PEC. For reference, here comes a non-exhaustive +list of specific features: LM90: * Filter and alert configuration register at 0xBF. @@ -91,6 +91,7 @@ ADM1032: * Conversion averaging. * Up to 64 conversions/s. * ALERT is triggered by open remote sensor. + * SMBus PEC support for Write Byte and Receive Byte transactions. ADT7461 * Extended temperature range (breaks compatibility) @@ -119,3 +120,37 @@ The lm90 driver will not update its values more frequently than every other second; reading them more often will do no harm, but will return 'old' values. +PEC Support +----------- + +The ADM1032 is the only chip of the family which supports PEC. It does +not support PEC on all transactions though, so some care must be taken. + +When reading a register value, the PEC byte is computed and sent by the +ADM1032 chip. However, in the case of a combined transaction (SMBus Read +Byte), the ADM1032 computes the CRC value over only the second half of +the message rather than its entirety, because it thinks the first half +of the message belongs to a different transaction. As a result, the CRC +value differs from what the SMBus master expects, and all reads fail. + +For this reason, the lm90 driver will enable PEC for the ADM1032 only if +the bus supports the SMBus Send Byte and Receive Byte transaction types. +These transactions will be used to read register values, instead of +SMBus Read Byte, and PEC will work properly. + +Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC. +Instead, it will try to write the PEC value to the register (because the +SMBus Send Byte transaction with PEC is similar to a Write Byte transaction +without PEC), which is not what we want. Thus, PEC is explicitely disabled +on SMBus Send Byte transactions in the lm90 driver. + +PEC on byte data transactions represents a significant increase in bandwidth +usage (+33% for writes, +25% for reads) in normal conditions. With the need +to use two SMBus transaction for reads, this overhead jumps to +50%. Worse, +two transactions will typically mean twice as much delay waiting for +transaction completion, effectively doubling the register cache refresh time. +I guess reliability comes at a price, but it's quite expensive this time. + +So, as not everyone might enjoy the slowdown, PEC can be disabled through +sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1 +to that file to enable PEC again. diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397 index da9d80c..20682f1 100644 --- a/Documentation/hwmon/smsc47b397 +++ b/Documentation/hwmon/smsc47b397 @@ -3,6 +3,7 @@ Kernel driver smsc47b397 Supported chips: * SMSC LPC47B397-NC + * SMSC SCH5307-NS Prefix: 'smsc47b397' Addresses scanned: none, address read from Super I/O config space Datasheet: In this file @@ -12,11 +13,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com> November 23, 2004 -The following specification describes the SMSC LPC47B397-NC sensor chip +The following specification describes the SMSC LPC47B397-NC[1] sensor chip (for which there is no public datasheet available). This document was provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected by Mark M. Hoffman <mhoffman@lightlink.com>. +[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise +compatible. + * * * * * Methods for detecting the HP SIO and reading the thermal data on a dc7100. @@ -127,7 +131,7 @@ OUT DX,AL The registers of interest for identifying the SIO on the dc7100 are Device ID (0x20) and Device Rev (0x21). -The Device ID will read 0X6F +The Device ID will read 0x6F (for SCH5307-NS, 0x81) The Device Rev currently reads 0x01 Obtaining the HWM Base Address. diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1 index 34e6478..c15bbe6 100644 --- a/Documentation/hwmon/smsc47m1 +++ b/Documentation/hwmon/smsc47m1 @@ -12,6 +12,10 @@ Supported chips: http://www.smsc.com/main/datasheets/47m14x.pdf http://www.smsc.com/main/tools/discontinued/47m15x.pdf http://www.smsc.com/main/datasheets/47m192.pdf + * SMSC LPC47M997 + Addresses scanned: none, address read from Super I/O config space + Prefix: 'smsc47m1' + Datasheet: none Authors: Mark D. Studebaker <mdsxyz123@yahoo.com>, @@ -30,6 +34,9 @@ The 47M15x and 47M192 chips contain a full 'hardware monitoring block' in addition to the fan monitoring and control. The hardware monitoring block is not supported by the driver. +No documentation is available for the 47M997, but it has the same device +ID as the 47M15x and 47M192 chips and seems to be compatible. + Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan readings can be divided by a programmable divider (1, 2, 4 or 8) to give diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 3464005..764cdc5 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -272,3 +272,6 @@ beep_mask Bitmask for beep. eeprom Raw EEPROM data in binary form. Read only. + +pec Enable or disable PEC (SMBus only) + Read/Write diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a index b82014c..a936fb3 100644 --- a/Documentation/hwmon/via686a +++ b/Documentation/hwmon/via686a @@ -18,8 +18,9 @@ Authors: Module Parameters ----------------- -force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards - that don't set the address in the BIOS. Does not do a +force_addr=0xaddr Set the I/O base address. Useful for boards that + don't set the address in the BIOS. Look for a BIOS + upgrade before resorting to this. Does not do a PCI force; the via686a must still be present in lspci. Don't use this unless the driver complains that the base address is not set. @@ -63,3 +64,15 @@ miss once-only alarms. The driver only updates its values each 1.5 seconds; reading it more often will do no harm, but will return 'old' values. + +Known Issues +------------ + +This driver handles sensors integrated in some VIA south bridges. It is +possible that a motherboard maker used a VT82C686A/B chip as part of a +product design but was not interested in its hardware monitoring features, +in which case the sensor inputs will not be wired. This is the case of +the Asus K7V, A7V and A7V133 motherboards, to name only a few of them. +So, if you need the force_addr parameter, and end up with values which +don't seem to make any sense, don't look any further: your chip is simply +not wired for hardware monitoring. diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810 index 0544eb3..83c3b97 100644 --- a/Documentation/i2c/busses/i2c-i810 +++ b/Documentation/i2c/busses/i2c-i810 @@ -2,6 +2,7 @@ Kernel driver i2c-i810 Supported adapters: * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH) + * Intel 82845G (GMCH) Authors: Frodo Looijaard <frodol@dds.nl>, diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 702f5ac..1677566 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -4,17 +4,16 @@ Supported adapters: * VIA Technologies, Inc. VT82C596A/B Datasheet: Sometimes available at the VIA website - * VIA Technologies, Inc. VT82C686A/B + * VIA Technologies, Inc. VT82C686A/B Datasheet: Sometimes available at the VIA website - * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237 - Datasheet: available on request from Via + * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R + Datasheet: available on request from VIA Authors: - Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, - Kyösti Mälkki <kmalkki@cc.hut.fi>, - Mark D. Studebaker <mdsxyz123@yahoo.com> + Kyösti Mälkki <kmalkki@cc.hut.fi>, + Mark D. Studebaker <mdsxyz123@yahoo.com>, + Jean Delvare <khali@linux-fr.org> Module Parameters ----------------- @@ -28,20 +27,22 @@ Description ----------- i2c-viapro is a true SMBus host driver for motherboards with one of the -supported VIA southbridges. +supported VIA south bridges. Your lspci -n listing must show one of these : - device 1106:3050 (VT82C596 function 3) - device 1106:3051 (VT82C596 function 3) + device 1106:3050 (VT82C596A function 3) + device 1106:3051 (VT82C596B function 3) device 1106:3057 (VT82C686 function 4) device 1106:3074 (VT8233) device 1106:3147 (VT8233A) - device 1106:8235 (VT8231) - devide 1106:3177 (VT8235) - devide 1106:3227 (VT8237) + device 1106:8235 (VT8231 function 4) + device 1106:3177 (VT8235) + device 1106:3227 (VT8237R) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. - +Except for the oldest chips (VT82C596A/B, VT82C686A and most probably +VT8231), this driver supports I2C block transactions. Such transactions +are mainly useful to read from and write to EEPROMs. diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205 new file mode 100644 index 0000000..09407c9 --- /dev/null +++ b/Documentation/i2c/chips/x1205 @@ -0,0 +1,38 @@ +Kernel driver x1205 +=================== + +Supported chips: + * Xicor X1205 RTC + Prefix: 'x1205' + Addresses scanned: none + Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html + +Authors: + Karen Spearel <kas11@tampabay.rr.com>, + Alessandro Zummo <a.zummo@towertech.it> + +Description +----------- + +This module aims to provide complete access to the Xicor X1205 RTC. +Recently Xicor has merged with Intersil, but the chip is +still sold under the Xicor brand. + +This chip is located at address 0x6f and uses a 2-byte register addressing. +Two bytes need to be written to read a single register, while most +other chips just require one and take the second one as the data +to be written. To prevent corrupting unknown chips, the user must +explicitely set the probe parameter. + +example: + +modprobe x1205 probe=0,0x6f + +The module supports one more option, hctosys, which is used to set the +software clock from the x1205. On systems where the x1205 is the +only hardware rtc, this parameter could be used to achieve a correct +date/time earlier in the system boot sequence. + +example: + +modprobe x1205 probe=0,0x6f hctosys=1 diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality index 41ffefb..60cca24 100644 --- a/Documentation/i2c/functionality +++ b/Documentation/i2c/functionality @@ -17,9 +17,10 @@ For the most up-to-date list of functionality constants, please check I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus adapters typically can not do these) I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions - I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_REV_DIR_ADDR, - I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART - flags (which modify the i2c protocol!) + I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK, + I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and + I2C_M_NO_RD_ACK flags (which modify the + I2C protocol!) I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index 4849dfd..184fac2 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -82,7 +82,7 @@ Technical changes: exit and exit_free. For i2c+isa drivers, labels should be named ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before jumping to error labels. By the way, labels should be left-aligned. - Use memset to fill the client and data area with 0x00. + Use kzalloc instead of kmalloc. Use i2c_set_clientdata to set the client data (as opposed to a direct access to client->data). Use strlcpy instead of strcpy to copy the client name. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 0772757..d19993c 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -33,8 +33,8 @@ static struct i2c_driver foo_driver = { .command = &foo_command /* may be NULL */ } -The name can be chosen freely, and may be upto 40 characters long. Please -use something descriptive here. +The name field must match the driver name, including the case. It must not +contain spaces, and may be up to 31 characters long. Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This means that your driver will be notified when new adapters are found. @@ -43,9 +43,6 @@ This is almost always what you want. All other fields are for call-back functions which will be explained below. -There use to be two additional fields in this structure, inc_use et dec_use, -for module usage count, but these fields were obsoleted and removed. - Extra client data ================= @@ -58,6 +55,7 @@ be very useful. An example structure is below. struct foo_data { + struct i2c_client client; struct semaphore lock; /* For ISA access in `sensors' drivers. */ int sysctl_id; /* To keep the /proc directory entry for `sensors' drivers. */ @@ -275,6 +273,7 @@ For now, you can ignore the `flags' parameter. It is there for future use. if (is_isa) { /* Discard immediately if this ISA range is already used */ + /* FIXME: never use check_region(), only request_region() */ if (check_region(address,FOO_EXTENT)) goto ERROR0; @@ -310,22 +309,15 @@ For now, you can ignore the `flags' parameter. It is there for future use. client structure, even though we cannot fill it completely yet. But it allows us to access several i2c functions safely */ - /* Note that we reserve some space for foo_data too. If you don't - need it, remove it. We do it here to help to lessen memory - fragmentation. */ - if (! (new_client = kmalloc(sizeof(struct i2c_client) + - sizeof(struct foo_data), - GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR0; } - /* This is tricky, but it will set the data to the right value. */ - client->data = new_client + 1; - data = (struct foo_data *) (client->data); + new_client = &data->client; + i2c_set_clientdata(new_client, data); new_client->addr = address; - new_client->data = data; new_client->adapter = adapter; new_client->driver = &foo_driver; new_client->flags = 0; @@ -420,7 +412,7 @@ For now, you can ignore the `flags' parameter. It is there for future use. release_region(address,FOO_EXTENT); /* SENSORS ONLY END */ ERROR1: - kfree(new_client); + kfree(data); ERROR0: return err; } @@ -451,7 +443,7 @@ much simpler than the attachment code, fortunately! release_region(client->addr,LM78_EXTENT); /* HYBRID SENSORS CHIP ONLY END */ - kfree(client); /* Frees client data too, if allocated at the same time */ + kfree(i2c_get_clientdata(client)); return 0; } @@ -576,12 +568,12 @@ SMBus communication extern s32 i2c_smbus_write_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); + extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, + u8 command, u8 *values); These ones were removed in Linux 2.6.10 because they had no users, but could be added back later if needed: - extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, - u8 command, u8 *values); extern s32 i2c_smbus_read_block_data(struct i2c_client * client, u8 command, u8 *values); extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt index 85f095a..0962c5c 100644 --- a/Documentation/input/yealink.txt +++ b/Documentation/input/yealink.txt @@ -2,7 +2,6 @@ Driver documentation for yealink usb-p1k phones 0. Status ~~~~~~~~~ - The p1k is a relatively cheap usb 1.1 phone with: - keyboard full support, yealink.ko / input event API - LCD full support, yealink.ko / sysfs API @@ -17,9 +16,8 @@ For vendor documentation see http://www.yealink.com 1. Compilation (stand alone version) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Currently only kernel 2.6.x.y versions are supported. -In order to build the yealink.ko module do: +In order to build the yealink.ko module do make @@ -28,6 +26,21 @@ the Makefile is pointing to the location where your kernel sources are located, default /usr/src/linux. +1.1 Troubleshooting +~~~~~~~~~~~~~~~~~~~ +Q: Module yealink compiled and installed without any problem but phone + is not initialized and does not react to any actions. +A: If you see something like: + hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone + in dmesg, it means that the hid driver has grabbed the device first. Try to + load module yealink before any other usb hid driver. Please see the + instructions provided by your distribution on module configuration. + +Q: Phone is working now (displays version and accepts keypad input) but I can't + find the sysfs files. +A: The sysfs files are located on the particular usb endpoint. On most + distributions you can do: "find /sys/ -name get_icons" for a hint. + 2. keyboard features ~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt index 769f925..aa7ba00 100644 --- a/Documentation/ioctl-number.txt +++ b/Documentation/ioctl-number.txt @@ -130,12 +130,10 @@ Code Seq# Include File Comments <mailto:zapman@interlan.net> 'i' 00-3F linux/i2o.h 'j' 00-3F linux/joystick.h -'k' all asm-sparc/kbio.h - asm-sparc64/kbio.h 'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system <http://mikonos.dia.unisa.it/tcfs> 'l' 40-7F linux/udf_fs_i.h in development: - <http://www.trylinux.com/projects/udf/> + <http://sourceforge.net/projects/linux-udf/> 'm' all linux/mtio.h conflict! 'm' all linux/soundcard.h conflict! 'm' all linux/synclink.h conflict! diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index cb89fb3..99d24f2 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -196,7 +196,7 @@ * Title: "Writing Linux Device Drivers" Author: Michael K. Johnson. - URL: http://people.redhat.com/johnsonm/devices.html + URL: http://users.evitech.fi/~tk/rtos/writing_linux_device_d.html Keywords: files, VFS, file operations, kernel interface, character vs block devices, I/O access, hardware interrupts, DMA, access to user memory, memory allocation, timers. @@ -284,7 +284,7 @@ * Title: "Linux Kernel Module Programming Guide" Author: Ori Pomerantz. - URL: http://www.tldp.org/LDP/lkmpg/mpg.html + URL: http://tldp.org/LDP/lkmpg/2.6/html/index.html Keywords: modules, GPL book, /proc, ioctls, system calls, interrupt handlers . Description: Very nice 92 pages GPL book on the topic of modules @@ -292,7 +292,7 @@ * Title: "Device File System (devfs) Overview" Author: Richard Gooch. - URL: http://www.atnf.csiro.au/~rgooch/linux/docs/devfs.txt + URL: http://www.atnf.csiro.au/people/rgooch/linux/docs/devfs.html Keywords: filesystem, /dev, devfs, dynamic devices, major/minor allocation, device management. Description: Document describing Richard Gooch's controversial @@ -316,9 +316,8 @@ * Title: "The Kernel Hacking HOWTO" Author: Various Talented People, and Rusty. - URL: - http://www.lisoleg.net/doc/Kernel-Hacking-HOWTO/kernel-hacking-HOW - TO.html + Location: in kernel tree, Documentation/DocBook/kernel-hacking/ + (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: HOWTO, kernel contexts, deadlock, locking, modules, symbols, return conventions. Description: From the Introduction: "Please understand that I @@ -332,13 +331,13 @@ originally written for the 2.3 kernels, but nearly all of it applies to 2.2 too; 2.0 is slightly different". - * Title: "ALSA 0.5.0 Developer documentation" - Author: Stephan 'Jumpy' Bartels . - URL: http://www.math.TU-Berlin.de/~sbartels/alsa/ + * Title: "Writing an ALSA Driver" + Author: Takashi Iwai <tiwai@suse.de> + URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware. Description: Advanced Linux Sound Architecture for developers, - both at kernel and user-level sides. Work in progress. ALSA is - supposed to be Linux's next generation sound architecture. + both at kernel and user-level sides. ALSA is the Linux kernel + sound architecture in the 2.6 kernel version. * Title: "Programming Guide for Linux USB Device Drivers" Author: Detlef Fliegl. @@ -369,8 +368,8 @@ filesystems, IPC and Networking Code. * Title: "Linux Kernel Mailing List Glossary" - Author: John Levon. - URL: http://www.movement.uklinux.net/glossary.html + Author: various + URL: http://kernelnewbies.org/glossary/ Keywords: glossary, terms, linux-kernel. Description: From the introduction: "This glossary is intended as a brief description of some of the acronyms and terms you may hear @@ -378,9 +377,8 @@ * Title: "Linux Kernel Locking HOWTO" Author: Various Talented People, and Rusty. - URL: - http://netfilter.kernelnotes.org/unreliable-guides/kernel-locking- - HOWTO.html + Location: in kernel tree, Documentation/DocBook/kernel-locking/ + (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: locks, locking, spinlock, semaphore, atomic, race condition, bottom halves, tasklets, softirqs. Description: The title says it all: document describing the @@ -490,7 +488,7 @@ * Title: "Get those boards talking under Linux." Author: Alex Ivchenko. - URL: http://www.ednmag.com/ednmag/reg/2000/06222000/13df2.htm + URL: http://www.edn.com/article/CA46968.html Keywords: data-acquisition boards, drivers, modules, interrupts, memory allocation. Description: Article written for people wishing to make their data @@ -498,7 +496,7 @@ overview on writing drivers, from the naming of functions to interrupt handling. Notes: Two-parts article. Part II is at - http://www.ednmag.com/ednmag/reg/2000/07062000/14df.htm + URL: http://www.edn.com/article/CA46998.html * Title: "Linux PCMCIA Programmer's Guide" Author: David Hinds. @@ -529,7 +527,7 @@ definitive guide for hackers, virus coders and system administrators." Author: pragmatic/THC. - URL: http://packetstorm.securify.com/groups/thc/LKM_HACKING.html + URL: http://packetstormsecurity.org/docs/hack/LKM_HACKING.html Keywords: syscalls, intercept, hide, abuse, symbol table. Description: Interesting paper on how to abuse the Linux kernel in order to intercept and modify syscalls, make @@ -537,8 +535,7 @@ write kernel modules based virus... and solutions for admins to avoid all those abuses. Notes: For 2.0.x kernels. Gives guidances to port it to 2.2.x - kernels. Also available in txt format at - http://www.blacknemesis.org/hacking/txt/cllkm.txt + kernels. BOOKS: (Not on-line) @@ -557,7 +554,17 @@ ISBN: 0-59600-008-1 Notes: Further information in http://www.oreilly.com/catalog/linuxdrive2/ - + + * Title: "Linux Device Drivers, 3nd Edition" + Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman + Publisher: O'Reilly & Associates. + Date: 2005. + Pages: 636. + ISBN: 0-596-00590-3 + Notes: Further information in + http://www.oreilly.com/catalog/linuxdrive3/ + PDF format, URL: http://lwn.net/Kernel/LDD3/ + * Title: "Linux Kernel Internals" Author: Michael Beck. Publisher: Addison-Wesley. @@ -766,12 +773,15 @@ documents, FAQs... * Name: "linux-kernel mailing list archives and search engines" + URL: http://vger.kernel.org/vger-lists.html URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html - URL: http://www.kernelnotes.org/lnxlists/linux-kernel/ - URL: http://www.geocrawler.com + URL: http://marc.theaimsgroup.com/?l=linux-kernel + URL: http://groups.google.com/group/mlist.linux.kernel + URL: http://www.cs.helsinki.fi/linux/linux-kernel/ + URL: http://www.lib.uaa.alaska.edu/linux-kernel/ Keywords: linux-kernel, archives, search. Description: Some of the linux-kernel mailing list archivers. If you have a better/another one, please let me know. _________________________________________________________________ - Document last updated on Thu Jun 28 15:09:39 CEST 2001 + Document last updated on Sat 2005-NOV-19 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7086f0a..5dffcfe 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -17,7 +17,7 @@ are specified on the kernel command line with the module name plus usbcore.blinkenlights=1 -The text in square brackets at the beginning of the description state the +The text in square brackets at the beginning of the description states the restrictions on the kernel for the said kernel parameter to be valid. The restrictions referred to are that the relevant option is valid if: @@ -27,8 +27,8 @@ restrictions referred to are that the relevant option is valid if: APM Advanced Power Management support is enabled. AX25 Appropriate AX.25 support is enabled. CD Appropriate CD support is enabled. - DEVFS devfs support is enabled. - DRM Direct Rendering Management support is enabled. + DEVFS devfs support is enabled. + DRM Direct Rendering Management support is enabled. EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled EIDE EIDE/ATAPI support is enabled. @@ -71,7 +71,7 @@ restrictions referred to are that the relevant option is valid if: SERIAL Serial support is enabled. SMP The kernel is an SMP kernel. SPARC Sparc architecture is enabled. - SWSUSP Software suspension is enabled. + SWSUSP Software suspend is enabled. TS Appropriate touchscreen support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. @@ -105,13 +105,13 @@ running once the system is up. See header of drivers/scsi/53c7xx.c. See also Documentation/scsi/ncr53c7xx.txt. - acpi= [HW,ACPI] Advanced Configuration and Power Interface - Format: { force | off | ht | strict } + acpi= [HW,ACPI] Advanced Configuration and Power Interface + Format: { force | off | ht | strict | noirq } force -- enable ACPI if default was off off -- disable ACPI if default was on noirq -- do not use ACPI for IRQ routing ht -- run only enough ACPI to enable Hyper Threading - strict -- Be less tolerant of platforms that are not + strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. See also Documentation/pm.txt, pci=noacpi @@ -119,20 +119,23 @@ running once the system is up. acpi_sleep= [HW,ACPI] Sleep options Format: { s3_bios, s3_mode } See Documentation/power/video.txt - + acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode - Format: { level | edge | high | low } + Format: { level | edge | high | low } - acpi_irq_balance [HW,ACPI] ACPI will balance active IRQs - default in APIC mode + acpi_irq_balance [HW,ACPI] + ACPI will balance active IRQs + default in APIC mode - acpi_irq_nobalance [HW,ACPI] ACPI will not move active IRQs (default) - default in PIC mode + acpi_irq_nobalance [HW,ACPI] + ACPI will not move active IRQs (default) + default in PIC mode - acpi_irq_pci= [HW,ACPI] If irq_balance, Clear listed IRQs for use by PCI + acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for + use by PCI Format: <irq>,<irq>... - acpi_irq_isa= [HW,ACPI] If irq_balance, Mark listed IRQs used by ISA + acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA Format: <irq>,<irq>... acpi_osi= [HW,ACPI] empty param disables _OSI @@ -145,14 +148,14 @@ running once the system is up. acpi_dbg_layer= [HW,ACPI] Format: <int> - Each bit of the <int> indicates an acpi debug layer, + Each bit of the <int> indicates an ACPI debug layer, 1: enable, 0: disable. It is useful for boot time debugging. After system has booted up, it can be set via /proc/acpi/debug_layer. acpi_dbg_level= [HW,ACPI] Format: <int> - Each bit of the <int> indicates an acpi debug level, + Each bit of the <int> indicates an ACPI debug level, 1: enable, 0: disable. It is useful for boot time debugging. After system has booted up, it can be set via /proc/acpi/debug_level. @@ -161,12 +164,13 @@ running once the system is up. acpi_generic_hotkey [HW,ACPI] Allow consolidated generic hotkey driver to - over-ride platform specific driver. + override platform specific driver. See also Documentation/acpi-hotkey.txt. enable_timer_pin_1 [i386,x86-64] Enable PIN 1 of APIC timer - Can be useful to work around chipset bugs (in particular on some ATI chipsets) + Can be useful to work around chipset bugs + (in particular on some ATI chipsets). The kernel tries to set a reasonable default. disable_timer_pin_1 [i386,x86-64] @@ -182,7 +186,7 @@ running once the system is up. adlib= [HW,OSS] Format: <io> - + advansys= [HW,SCSI] See header of drivers/scsi/advansys.c. @@ -192,7 +196,7 @@ running once the system is up. aedsp16= [HW,OSS] Audio Excel DSP 16 Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq> See also header of sound/oss/aedsp16.c. - + aha152x= [HW,SCSI] See Documentation/scsi/aha152x.txt. @@ -205,10 +209,6 @@ running once the system is up. aic79xx= [HW,SCSI] See Documentation/scsi/aic79xx.txt. - AM53C974= [HW,SCSI] - Format: <host-scsi-id>,<target-scsi-id>,<max-rate>,<max-offset> - See also header of drivers/scsi/AM53C974.c. - amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: <a>,<b> @@ -219,23 +219,24 @@ running once the system is up. connected to one of 16 gameports Format: <type1>,<type2>,..<type16> - apc= [HW,SPARC] Power management functions (SPARCstation-4/5 + deriv.) + apc= [HW,SPARC] + Power management functions (SPARCstation-4/5 + deriv.) Format: noidle Disable APC CPU standby support. SPARCstation-Fox does not play well with APC CPU idle - disable it if you have APC and your system crashes randomly. - apic= [APIC,i386] Change the output verbosity whilst booting + apic= [APIC,i386] Change the output verbosity whilst booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output when initialising the APIC and IO-APIC components. - + apm= [APM] Advanced Power Management See header of arch/i386/kernel/apm.c. applicom= [HW] Format: <mem>,<irq> - + arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards Format: <io>,<irq>,<nodeID> @@ -250,38 +251,40 @@ running once the system is up. atkbd.reset= [HW] Reset keyboard during initialization - atkbd.set= [HW] Select keyboard code set - Format: <int> (2 = AT (default) 3 = PS/2) + atkbd.set= [HW] Select keyboard code set + Format: <int> (2 = AT (default), 3 = PS/2) atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar keyboards atkbd.softraw= [HW] Choose between synthetic and real raw mode Format: <bool> (0 = real, 1 = synthetic (default)) - - atkbd.softrepeat= - [HW] Use software keyboard repeat + + atkbd.softrepeat= [HW] + Use software keyboard repeat autotest [IA64] awe= [HW,OSS] AWE32/SB32/AWE64 wave table synth Format: <io>,<memsize>,<isapnp> - + aztcd= [HW,CD] Aztech CD268 CDROM driver Format: <io>,0x79 (?) baycom_epp= [HW,AX25] Format: <io>,<mode> - + baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem Format: <io>,<mode> See header of drivers/net/hamradio/baycom_par.c. - baycom_ser_fdx= [HW,AX25] BayCom Serial Port AX.25 Modem (Full Duplex Mode) + baycom_ser_fdx= [HW,AX25] + BayCom Serial Port AX.25 Modem (Full Duplex Mode) Format: <io>,<irq>,<mode>[,<baud>] See header of drivers/net/hamradio/baycom_ser_fdx.c. - baycom_ser_hdx= [HW,AX25] BayCom Serial Port AX.25 Modem (Half Duplex Mode) + baycom_ser_hdx= [HW,AX25] + BayCom Serial Port AX.25 Modem (Half Duplex Mode) Format: <io>,<irq>,<mode> See header of drivers/net/hamradio/baycom_ser_hdx.c. @@ -292,7 +295,8 @@ running once the system is up. blkmtd_count= bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) - bttv.radio= Most important insmod options are available as kernel args too. + bttv.radio= Most important insmod options are available as + kernel args too. bttv.pll= See Documentation/video4linux/bttv/Insmod-options bttv.tuner= and Documentation/video4linux/bttv/CARDLIST @@ -318,15 +322,17 @@ running once the system is up. checkreqprot [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. - 0 -- check protection applied by kernel (includes any implied execute protection). + 0 -- check protection applied by kernel (includes + any implied execute protection). 1 -- check protection requested by application. Default value is set via a kernel config option. - Value can be changed at runtime via /selinux/checkreqprot. - - clock= [BUGS=IA-32, HW] gettimeofday timesource override. + Value can be changed at runtime via + /selinux/checkreqprot. + + clock= [BUGS=IA-32,HW] gettimeofday timesource override. Forces specified timesource (if avaliable) to be used - when calculating gettimeofday(). If specicified timesource - is not avalible, it defaults to PIT. + when calculating gettimeofday(). If specicified + timesource is not avalible, it defaults to PIT. Format: { pit | tsc | cyclone | pmtmr } hpet= [IA-32,HPET] option to disable HPET and use PIT. @@ -336,17 +342,19 @@ running once the system is up. Format: { auto | [<io>,][<irq>] } com20020= [HW,NET] ARCnet - COM20020 chipset - Format: <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]] + Format: + <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]] com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers) Format: <io>[,<irq>] - com90xx= [HW,NET] ARCnet - COM90xx chipset (memory-mapped buffers) + com90xx= [HW,NET] + ARCnet - COM90xx chipset (memory-mapped buffers) Format: <io>[,<irq>[,<memstart>]] condev= [HW,S390] console device conmode= - + console= [KNL] Output console device and options. tty<n> Use the virtual console device <n>. @@ -367,7 +375,8 @@ running once the system is up. options are the same as for ttyS, above. cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver - Format: <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] + Format: + <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] cpia_pp= [HW,PPT] Format: { parport<nr> | auto | none } @@ -384,10 +393,10 @@ running once the system is up. cs89x0_media= [HW,NET] Format: { rj45 | aui | bnc } - + cyclades= [HW,SERIAL] Cyclades multi-serial port adapter. - - dasd= [HW,NET] + + dasd= [HW,NET] See header of drivers/s390/block/dasd_devmap.c. db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port @@ -406,7 +415,7 @@ running once the system is up. dhash_entries= [KNL] Set number of hash buckets for dentry cache. - + digi= [HW,SERIAL] IO parameters + enable/disable command. @@ -424,11 +433,11 @@ running once the system is up. dtc3181e= [HW,SCSI] - earlyprintk= [IA-32, X86-64] + earlyprintk= [IA-32,X86-64] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] - Append ,keep to not disable it when the real console + Append ",keep" to not disable it when the real console takes over. Only vga or serial at a time, not both. @@ -451,7 +460,7 @@ running once the system is up. Format: {"of[f]" | "sk[ipmbr]"} See comment in arch/i386/boot/edd.S - eicon= [HW,ISDN] + eicon= [HW,ISDN] Format: <id>,<membase>,<irq> eisa_irq_edge= [PARISC,HW] @@ -462,12 +471,13 @@ running once the system is up. arch/i386/kernel/cpu/cpufreq/elanfreq.c. elevator= [IOSCHED] - Format: {"as"|"cfq"|"deadline"|"noop"} - See Documentation/block/as-iosched.txt - and Documentation/block/deadline-iosched.txt for details. + Format: {"as" | "cfq" | "deadline" | "noop"} + See Documentation/block/as-iosched.txt and + Documentation/block/deadline-iosched.txt for details. + elfcorehdr= [IA-32] - Specifies physical address of start of kernel core image - elf header. + Specifies physical address of start of kernel core + image elf header. See Documentation/kdump.txt for details. enforcing [SELINUX] Set initial enforcing status. @@ -485,7 +495,7 @@ running once the system is up. es1371= [HW,OSS] Format: <spdif>,[<nomix>,[<amplifier>]] See also header of sound/oss/es1371.c. - + ether= [HW,NET] Ethernet cards parameters This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. @@ -526,12 +536,13 @@ running once the system is up. gus= [HW,OSS] Format: <io>,<irq>,<dma>,<dma16> - + gvp11= [HW,SCSI] hashdist= [KNL,NUMA] Large hashes allocated during boot are distributed across NUMA nodes. Defaults on for IA-64, off otherwise. + Format: 0 | 1 (for off | on) hcl= [IA-64] SGI's Hardware Graph compatibility layer @@ -595,13 +606,13 @@ running once the system is up. ide?= [HW] (E)IDE subsystem Format: ide?=noprobe or chipset specific parameters. See Documentation/ide.txt. - + idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed See Documentation/ide.txt. idle= [HW] Format: idle=poll or idle=halt - + ihash_entries= [KNL] Set number of hash buckets for inode cache. @@ -649,7 +660,7 @@ running once the system is up. firmware running. isapnp= [ISAPNP] - Format: <RDP>, <reset>, <pci_scan>, <verbosity> + Format: <RDP>,<reset>,<pci_scan>,<verbosity> isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler. Format: <cpu number>,...,<cpu number> @@ -661,32 +672,33 @@ running once the system is up. "number of CPUs in system - 1". This option is the preferred way to isolate CPUs. The - alternative - manually setting the CPU mask of all tasks - in the system can cause problems and suboptimal load - balancer performance. + alternative -- manually setting the CPU mask of all + tasks in the system -- can cause problems and + suboptimal load balancer performance. isp16= [HW,CD] Format: <io>,<irq>,<dma>,<setup> - iucv= [HW,NET] + iucv= [HW,NET] js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. keepinitrd [HW,ARM] - kstack=N [IA-32, X86-64] Print N words from the kernel stack + kstack=N [IA-32,X86-64] Print N words from the kernel stack in oops dumps. l2cr= [PPC] - lapic [IA-32,APIC] Enable the local APIC even if BIOS disabled it. + lapic [IA-32,APIC] Enable the local APIC even if BIOS + disabled it. lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip Format: addr:<io>,irq:<irq> - llsc*= [IA64] - See function print_params() in arch/ia64/sn/kernel/llsc4.c. + llsc*= [IA64] See function print_params() in + arch/ia64/sn/kernel/llsc4.c. load_ramdisk= [RAM] List of ramdisks to load from floppy See Documentation/ramdisk.txt. @@ -713,8 +725,9 @@ running once the system is up. 7 (KERN_DEBUG) debug-level messages log_buf_len=n Sets the size of the printk ring buffer, in bytes. - Format is n, nk, nM. n must be a power of two. The - default is set in kernel config. + Format: { n | nk | nM } + n must be a power of two. The default size + is set in the kernel config file. lp=0 [LP] Specify parallel ports to use, e.g, lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses @@ -750,23 +763,23 @@ running once the system is up. ltpc= [NET] Format: <io>,<irq>,<dma> - mac5380= [HW,SCSI] - Format: <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> + mac5380= [HW,SCSI] Format: + <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> - mac53c9x= [HW,SCSI] - Format: <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> + mac53c9x= [HW,SCSI] Format: + <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> - machvec= [IA64] - Force the use of a particular machine-vector (machvec) in a generic - kernel. Example: machvec=hpzx1_swiotlb + machvec= [IA64] Force the use of a particular machine-vector + (machvec) in a generic kernel. + Example: machvec=hpzx1_swiotlb - mad16= [HW,OSS] - Format: <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick> + mad16= [HW,OSS] Format: + <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick> maui= [HW,OSS] Format: <io>,<irq> - - max_loop= [LOOP] Maximum number of loopback devices that can + + max_loop= [LOOP] Maximum number of loopback devices that can be mounted Format: <1-256> @@ -776,11 +789,11 @@ running once the system is up. max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or equal to this physical address is ignored. - max_luns= [SCSI] Maximum number of LUNs to probe + max_luns= [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. max_report_luns= - [SCSI] Maximum number of LUNs received + [SCSI] Maximum number of LUNs received. Should be between 1 and 16384. mca-pentium [BUGS=IA-32] @@ -796,11 +809,11 @@ running once the system is up. md= [HW] RAID subsystems devices and level See Documentation/md.txt. - + mdacon= [MDA] Format: <first>,<last> Specifies range of consoles to be captured by the MDA. - + mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory Amount of memory to be used when the kernel is not able to see the whole system memory or for test. @@ -851,15 +864,15 @@ running once the system is up. MTD_Partition= [MTD] Format: <name>,<region-number>,<size>,<offset> - MTD_Region= [MTD] - Format: <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>] + MTD_Region= [MTD] Format: + <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>] mtdparts= [MTD] See drivers/mtd/cmdline.c. mtouchusb.raw_coordinates= - [HW] Make the MicroTouch USB driver use raw coordinates ('y', default) - or cooked coordinates ('n') + [HW] Make the MicroTouch USB driver use raw coordinates + ('y', default) or cooked coordinates ('n') n2= [NET] SDL Inc. RISCom/N2 synchronous serial card @@ -880,7 +893,9 @@ running once the system is up. Format: <irq>,<io>,<mem_start>,<mem_end>,<name> Note that mem_start is often overloaded to mean something different and driver-specific. - + This usage is only documented in each driver source + file if at all. + nfsaddrs= [NFS] See Documentation/nfsroot.txt. @@ -893,8 +908,8 @@ running once the system is up. emulation library even if a 387 maths coprocessor is present. - noalign [KNL,ARM] - + noalign [KNL,ARM] + noapic [SMP,APIC] Tells the kernel to not make use of any IOAPICs that may be present in the system. @@ -905,19 +920,19 @@ running once the system is up. on "Classic" PPC cores. nocache [ARM] - + nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects. noexec [IA-64] - noexec [IA-32, X86-64] + noexec [IA-32,X86-64] noexec=on: enable non-executable mappings (default) noexec=off: disable nn-executable mappings nofxsr [BUGS=IA-32] nohlt [BUGS=ARM] - + no-hlt [BUGS=IA-32] Tells the kernel that the hlt instruction doesn't work correctly and not to use it. @@ -948,8 +963,9 @@ running once the system is up. noresidual [PPC] Don't use residual data on PReP machines. - noresume [SWSUSP] Disables resume and restore original swap space. - + noresume [SWSUSP] Disables resume and restores original swap + space. + no-scroll [VGA] Disables scrollback. This is required for the Braillex ib80-piezo Braille reader made by F.H. Papenmeier (Germany). @@ -965,16 +981,16 @@ running once the system is up. nousb [USB] Disable the USB subsystem nowb [ARM] - + opl3= [HW,OSS] Format: <io> opl3sa= [HW,OSS] Format: <io>,<irq>,<dma>,<dma2>,<mpu_io>,<mpu_irq> - opl3sa2= [HW,OSS] - Format: <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple] - + opl3sa2= [HW,OSS] Format: + <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple] + oprofile.timer= [HW] Use timer interrupt instead of performance counters @@ -993,36 +1009,33 @@ running once the system is up. Format: <parport#> parkbd.mode= [HW] Parallel port keyboard adapter mode of operation, 0 for XT, 1 for AT (default is AT). - Format: <mode> - - parport=0 [HW,PPT] Specify parallel ports. 0 disables. - parport=auto Use 'auto' to force the driver to use - parport=0xBBB[,IRQ[,DMA]] any IRQ/DMA settings detected (the - default is to ignore detected IRQ/DMA - settings because of possible - conflicts). You can specify the base - address, IRQ, and DMA settings; IRQ and - DMA should be numbers, or 'auto' (for - using detected settings on that - particular port), or 'nofifo' (to avoid - using a FIFO even if it is detected). - Parallel ports are assigned in the - order they are specified on the command - line, starting with parport0. - - parport_init_mode= - [HW,PPT] Configure VIA parallel port to - operate in specific mode. This is - necessary on Pegasos computer where - firmware has no options for setting up - parallel port mode and sets it to - spp. Currently this function knows - 686a and 8231 chips. + Format: <mode> + + parport= [HW,PPT] Specify parallel ports. 0 disables. + Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] } + Use 'auto' to force the driver to use any + IRQ/DMA settings detected (the default is to + ignore detected IRQ/DMA settings because of + possible conflicts). You can specify the base + address, IRQ, and DMA settings; IRQ and DMA + should be numbers, or 'auto' (for using detected + settings on that particular port), or 'nofifo' + (to avoid using a FIFO even if it is detected). + Parallel ports are assigned in the order they + are specified on the command line, starting + with parport0. + + parport_init_mode= [HW,PPT] + Configure VIA parallel port to operate in + a specific mode. This is necessary on Pegasos + computer where firmware has no options for setting + up parallel port mode and sets it to spp. + Currently this function knows 686a and 8231 chips. Format: [spp|ps2|epp|ecp|ecpepp] - pas2= [HW,OSS] - Format: <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16> - + pas2= [HW,OSS] Format: + <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16> + pas16= [HW,SCSI] See header of drivers/scsi/pas16.c. @@ -1032,64 +1045,67 @@ running once the system is up. See header of drivers/block/paride/pcd.c. See also Documentation/paride.txt. - pci=option[,option...] [PCI] various PCI subsystem options: - off [IA-32] don't probe for the PCI bus - bios [IA-32] force use of PCI BIOS, don't access - the hardware directly. Use this if your machine - has a non-standard PCI host bridge. - nobios [IA-32] disallow use of PCI BIOS, only direct - hardware access methods are allowed. Use this - if you experience crashes upon bootup and you - suspect they are caused by the BIOS. - conf1 [IA-32] Force use of PCI Configuration Mechanism 1. - conf2 [IA-32] Force use of PCI Configuration Mechanism 2. - nosort [IA-32] Don't sort PCI devices according to - order given by the PCI BIOS. This sorting is done - to get a device order compatible with older kernels. - biosirq [IA-32] Use PCI BIOS calls to get the interrupt - routing table. These calls are known to be buggy - on several machines and they hang the machine when used, - but on other computers it's the only way to get the - interrupt routing table. Try this option if the kernel - is unable to allocate IRQs or discover secondary PCI - buses on your motherboard. - rom [IA-32] Assign address space to expansion ROMs. - Use with caution as certain devices share address - decoders between ROMs and other resources. - irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be assigned - automatically to PCI devices. You can make the kernel - exclude IRQs of your ISA cards this way. + pci=option[,option...] [PCI] various PCI subsystem options: + off [IA-32] don't probe for the PCI bus + bios [IA-32] force use of PCI BIOS, don't access + the hardware directly. Use this if your machine + has a non-standard PCI host bridge. + nobios [IA-32] disallow use of PCI BIOS, only direct + hardware access methods are allowed. Use this + if you experience crashes upon bootup and you + suspect they are caused by the BIOS. + conf1 [IA-32] Force use of PCI Configuration + Mechanism 1. + conf2 [IA-32] Force use of PCI Configuration + Mechanism 2. + nosort [IA-32] Don't sort PCI devices according to + order given by the PCI BIOS. This sorting is + done to get a device order compatible with + older kernels. + biosirq [IA-32] Use PCI BIOS calls to get the interrupt + routing table. These calls are known to be buggy + on several machines and they hang the machine + when used, but on other computers it's the only + way to get the interrupt routing table. Try + this option if the kernel is unable to allocate + IRQs or discover secondary PCI buses on your + motherboard. + rom [IA-32] Assign address space to expansion ROMs. + Use with caution as certain devices share + address decoders between ROMs and other + resources. + irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be + assigned automatically to PCI devices. You can + make the kernel exclude IRQs of your ISA cards + this way. pirqaddr=0xAAAAA [IA-32] Specify the physical address - of the PIRQ table (normally generated - by the BIOS) if it is outside the - F0000h-100000h range. - lastbus=N [IA-32] Scan all buses till bus #N. Can be useful - if the kernel is unable to find your secondary buses - and you want to tell it explicitly which ones they are. - assign-busses [IA-32] Always assign all PCI bus - numbers ourselves, overriding - whatever the firmware may have - done. - usepirqmask [IA-32] Honor the possible IRQ mask - stored in the BIOS $PIR table. This is - needed on some systems with broken - BIOSes, notably some HP Pavilion N5400 - and Omnibook XE3 notebooks. This will - have no effect if ACPI IRQ routing is - enabled. - noacpi [IA-32] Do not use ACPI for IRQ routing - or for PCI scanning. - routeirq Do IRQ routing for all PCI devices. - This is normally done in pci_enable_device(), - so this option is a temporary workaround - for broken drivers that don't call it. - - firmware [ARM] Do not re-enumerate the bus but - instead just use the configuration - from the bootloader. This is currently - used on IXP2000 systems where the - bus has to be configured a certain way - for adjunct CPUs. + of the PIRQ table (normally generated + by the BIOS) if it is outside the + F0000h-100000h range. + lastbus=N [IA-32] Scan all buses thru bus #N. Can be + useful if the kernel is unable to find your + secondary buses and you want to tell it + explicitly which ones they are. + assign-busses [IA-32] Always assign all PCI bus + numbers ourselves, overriding + whatever the firmware may have done. + usepirqmask [IA-32] Honor the possible IRQ mask stored + in the BIOS $PIR table. This is needed on + some systems with broken BIOSes, notably + some HP Pavilion N5400 and Omnibook XE3 + notebooks. This will have no effect if ACPI + IRQ routing is enabled. + noacpi [IA-32] Do not use ACPI for IRQ routing + or for PCI scanning. + routeirq Do IRQ routing for all PCI devices. + This is normally done in pci_enable_device(), + so this option is a temporary workaround + for broken drivers that don't call it. + firmware [ARM] Do not re-enumerate the bus but instead + just use the configuration from the + bootloader. This is currently used on + IXP2000 systems where the bus has to be + configured a certain way for adjunct CPUs. pcmv= [HW,PCMCIA] BadgePAD 4 @@ -1127,19 +1143,20 @@ running once the system is up. [ISAPNP] Exclude DMAs for the autoconfiguration pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration - Ranges are in pairs (I/O port base and size). + Ranges are in pairs (I/O port base and size). pnp_reserve_mem= - [ISAPNP] Exclude memory regions for the autoconfiguration + [ISAPNP] Exclude memory regions for the + autoconfiguration. Ranges are in pairs (memory base and size). profile= [KNL] Enable kernel profiling via /proc/profile - { schedule | <number> } - (param: schedule - profile schedule points} - (param: profile step/bucket size as a power of 2 for - statistical time based profiling) + Format: [schedule,]<number> + Param: "schedule" - profile schedule points. + Param: <number> - step/bucket size as a power of 2 for + statistical time based profiling. - processor.max_cstate= [HW, ACPI] + processor.max_cstate= [HW,ACPI] Limit processor to maximum C-state max_cstate=9 overrides any DMI blacklist limit. @@ -1147,27 +1164,28 @@ running once the system is up. before loading. See Documentation/ramdisk.txt. - psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to - probe for (bare|imps|exps|lifebook|any). + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to + probe for; one of (bare|imps|exps|lifebook|any). psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports per second. - psmouse.resetafter= - [HW,MOUSE] Try to reset the device after so many bad packets + psmouse.resetafter= [HW,MOUSE] + Try to reset the device after so many bad packets (0 = never). psmouse.resolution= [HW,MOUSE] Set desired mouse resolution, in dpi. psmouse.smartscroll= - [HW,MOUSE] Controls Logitech smartscroll autorepeat, + [HW,MOUSE] Controls Logitech smartscroll autorepeat. 0 = disabled, 1 = enabled (default). pss= [HW,OSS] Personal Sound System (ECHO ESC614) - Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> + Format: + <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> pt. [PARIDE] See Documentation/paride.txt. quiet= [KNL] Disable log messages - + r128= [HW,DRM] raid= [HW,RAID] @@ -1176,10 +1194,9 @@ running once the system is up. ramdisk= [RAM] Sizes of RAM disks in kilobytes [deprecated] See Documentation/ramdisk.txt. - ramdisk_blocksize= - [RAM] + ramdisk_blocksize= [RAM] See Documentation/ramdisk.txt. - + ramdisk_size= [RAM] Sizes of RAM disks in kilobytes New name for the ramdisk parameter. See Documentation/ramdisk.txt. @@ -1195,7 +1212,8 @@ running once the system is up. reserve= [KNL,BUGS] Force the kernel to ignore some iomem area - resume= [SWSUSP] Specify the partition device for software suspension + resume= [SWSUSP] + Specify the partition device for software suspend rhash_entries= [KNL,NET] Set number of hash buckets for route cache @@ -1225,7 +1243,7 @@ running once the system is up. Format: <io>,<irq>,<dma>,<dma2> sbni= [NET] Granch SBNI12 leased line adapter - + sbpcd= [HW,CD] Soundblaster CD adapter Format: <io>,<type> See a comment before function sbpcd_setup() in @@ -1258,21 +1276,20 @@ running once the system is up. serialnumber [BUGS=IA-32] - sg_def_reserved_size= - [SCSI] - + sg_def_reserved_size= [SCSI] + sgalaxy= [HW,OSS] Format: <io>,<irq>,<dma>,<dma2>,<sgbase> shapers= [NET] Maximal number of shapers. - + sim710= [SCSI,HW] See header of drivers/scsi/sim710.c. simeth= [IA-64] simscsi= - + sjcd= [HW,CD] Format: <io>,<irq>,<dma> See header of drivers/cdrom/sjcd.c. @@ -1403,10 +1420,10 @@ running once the system is up. snd-wavefront= [HW,ALSA] snd-ymfpci= [HW,ALSA] - + sonicvibes= [HW,OSS] Format: <reverb> - + sonycd535= [HW,CD] Format: <io>[,<irq>] @@ -1423,7 +1440,7 @@ running once the system is up. sscape= [HW,OSS] Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq> - + st= [HW,SCSI] SCSI tape parameters (buffers, etc.) See Documentation/scsi/st.txt. @@ -1443,10 +1460,8 @@ running once the system is up. stifb= [HW] Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]] - stram_swap= [HW,M68k] - swiotlb= [IA-64] Number of I/O TLB slabs - + switches= [HW,M68k] sym53c416= [HW,SCSI] @@ -1479,14 +1494,16 @@ running once the system is up. tp720= [HW,PS2] trix= [HW,OSS] MediaTrix AudioTrix Pro - Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> - + Format: + <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> + tsdev.xres= [TS] Horizontal screen resolution. tsdev.yres= [TS] Vertical screen resolution. - turbografx.map[2|3]= - [HW,JOY] TurboGraFX parallel port interface - Format: <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7> + turbografx.map[2|3]= [HW,JOY] + TurboGraFX parallel port interface + Format: + <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7> See also Documentation/input/joystick-parport.txt u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter @@ -1498,21 +1515,20 @@ running once the system is up. uart6850= [HW,OSS] Format: <io>,<irq> - usb-handoff [HW] Enable early USB BIOS -> OS handoff - usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. - + video= [FB] Frame buffer configuration See Documentation/fb/modedb.txt. vga= [BOOT,IA-32] Select a particular video mode - See Documentation/i386/boot.txt and Documentation/svga.txt. + See Documentation/i386/boot.txt and + Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is passed to the kernel using a special protocol. - vmalloc=nn[KMG] [KNL,BOOT] forces the vmalloc area to have an exact + vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact size of <nn>. This can be used to increase the minimum size (128MB on x86). It can also be used to decrease the size and leave more room for directly @@ -1520,11 +1536,11 @@ running once the system is up. vmhalt= [KNL,S390] - vmpoff= [KNL,S390] - + vmpoff= [KNL,S390] + waveartist= [HW,OSS] Format: <io>,<irq>,<dma>,<dma2> - + wd33c93= [HW,SCSI] See header of drivers/scsi/wd33c93.c. @@ -1538,21 +1554,25 @@ running once the system is up. xd_geo= See header of drivers/block/xd.c. xirc2ps_cs= [NET,PCMCIA] - Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]] - + Format: + <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]] +______________________________________________________________________ Changelog: +2000-06-?? Mr. Unknown The last known update (for 2.4.0) - the changelog was not kept before. - 2000-06-?? Mr. Unknown +2002-11-24 Petr Baudis <pasky@ucw.cz> + Randy Dunlap <randy.dunlap@verizon.net> Update for 2.5.49, description for most of the options introduced, references to other documentation (C files, READMEs, ..), added S390, PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and reformatting. - 2002-11-24 Petr Baudis <pasky@ucw.cz> - Randy Dunlap <randy.dunlap@verizon.net> + +2005-10-19 Randy Dunlap <rdunlap@xenotime.net> + Lots of typos, whitespace, some reformatting. TODO: diff --git a/Documentation/keys-request-key.txt b/Documentation/keys-request-key.txt new file mode 100644 index 0000000..5f2b9c5 --- /dev/null +++ b/Documentation/keys-request-key.txt @@ -0,0 +1,161 @@ + =================== + KEY REQUEST SERVICE + =================== + +The key request service is part of the key retention service (refer to +Documentation/keys.txt). This document explains more fully how that the +requesting algorithm works. + +The process starts by either the kernel requesting a service by calling +request_key(): + + struct key *request_key(const struct key_type *type, + const char *description, + const char *callout_string); + +Or by userspace invoking the request_key system call: + + key_serial_t request_key(const char *type, + const char *description, + const char *callout_info, + key_serial_t dest_keyring); + +The main difference between the two access points is that the in-kernel +interface does not need to link the key to a keyring to prevent it from being +immediately destroyed. The kernel interface returns a pointer directly to the +key, and it's up to the caller to destroy the key. + +The userspace interface links the key to a keyring associated with the process +to prevent the key from going away, and returns the serial number of the key to +the caller. + + +=========== +THE PROCESS +=========== + +A request proceeds in the following manner: + + (1) Process A calls request_key() [the userspace syscall calls the kernel + interface]. + + (2) request_key() searches the process's subscribed keyrings to see if there's + a suitable key there. If there is, it returns the key. If there isn't, and + callout_info is not set, an error is returned. Otherwise the process + proceeds to the next step. + + (3) request_key() sees that A doesn't have the desired key yet, so it creates + two things: + + (a) An uninstantiated key U of requested type and description. + + (b) An authorisation key V that refers to key U and notes that process A + is the context in which key U should be instantiated and secured, and + from which associated key requests may be satisfied. + + (4) request_key() then forks and executes /sbin/request-key with a new session + keyring that contains a link to auth key V. + + (5) /sbin/request-key execs an appropriate program to perform the actual + instantiation. + + (6) The program may want to access another key from A's context (say a + Kerberos TGT key). It just requests the appropriate key, and the keyring + search notes that the session keyring has auth key V in its bottom level. + + This will permit it to then search the keyrings of process A with the + UID, GID, groups and security info of process A as if it was process A, + and come up with key W. + + (7) The program then does what it must to get the data with which to + instantiate key U, using key W as a reference (perhaps it contacts a + Kerberos server using the TGT) and then instantiates key U. + + (8) Upon instantiating key U, auth key V is automatically revoked so that it + may not be used again. + + (9) The program then exits 0 and request_key() deletes key V and returns key + U to the caller. + +This also extends further. If key W (step 5 above) didn't exist, key W would be +created uninstantiated, another auth key (X) would be created [as per step 3] +and another copy of /sbin/request-key spawned [as per step 4]; but the context +specified by auth key X will still be process A, as it was in auth key V. + +This is because process A's keyrings can't simply be attached to +/sbin/request-key at the appropriate places because (a) execve will discard two +of them, and (b) it requires the same UID/GID/Groups all the way through. + + +====================== +NEGATIVE INSTANTIATION +====================== + +Rather than instantiating a key, it is possible for the possessor of an +authorisation key to negatively instantiate a key that's under construction. +This is a short duration placeholder that causes any attempt at re-requesting +the key whilst it exists to fail with error ENOKEY. + +This is provided to prevent excessive repeated spawning of /sbin/request-key +processes for a key that will never be obtainable. + +Should the /sbin/request-key process exit anything other than 0 or die on a +signal, the key under construction will be automatically negatively +instantiated for a short amount of time. + + +==================== +THE SEARCH ALGORITHM +==================== + +A search of any particular keyring proceeds in the following fashion: + + (1) When the key management code searches for a key (keyring_search_aux) it + firstly calls key_permission(SEARCH) on the keyring it's starting with, + if this denies permission, it doesn't search further. + + (2) It considers all the non-keyring keys within that keyring and, if any key + matches the criteria specified, calls key_permission(SEARCH) on it to see + if the key is allowed to be found. If it is, that key is returned; if + not, the search continues, and the error code is retained if of higher + priority than the one currently set. + + (3) It then considers all the keyring-type keys in the keyring it's currently + searching. It calls key_permission(SEARCH) on each keyring, and if this + grants permission, it recurses, executing steps (2) and (3) on that + keyring. + +The process stops immediately a valid key is found with permission granted to +use it. Any error from a previous match attempt is discarded and the key is +returned. + +When search_process_keyrings() is invoked, it performs the following searches +until one succeeds: + + (1) If extant, the process's thread keyring is searched. + + (2) If extant, the process's process keyring is searched. + + (3) The process's session keyring is searched. + + (4) If the process has a request_key() authorisation key in its session + keyring then: + + (a) If extant, the calling process's thread keyring is searched. + + (b) If extant, the calling process's process keyring is searched. + + (c) The calling process's session keyring is searched. + +The moment one succeeds, all pending errors are discarded and the found key is +returned. + +Only if all these fail does the whole thing fail with the highest priority +error. Note that several errors may have come from LSM. + +The error priority is: + + EKEYREVOKED > EKEYEXPIRED > ENOKEY + +EACCES/EPERM are only returned on a direct search of a specific keyring where +the basal keyring does not grant Search permission. diff --git a/Documentation/keys.txt b/Documentation/keys.txt index 0321ded..3115488 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -195,8 +195,8 @@ KEY ACCESS PERMISSIONS ====================== Keys have an owner user ID, a group access ID, and a permissions mask. The mask -has up to eight bits each for user, group and other access. Only five of each -set of eight bits are defined. These permissions granted are: +has up to eight bits each for possessor, user, group and other access. Only +six of each set of eight bits are defined. These permissions granted are: (*) View @@ -224,6 +224,10 @@ set of eight bits are defined. These permissions granted are: keyring to a key, a process must have Write permission on the keyring and Link permission on the key. + (*) Set Attribute + + This permits a key's UID, GID and permissions mask to be changed. + For changing the ownership, group ID or permissions mask, being the owner of the key or having the sysadmin capability is sufficient. @@ -241,16 +245,16 @@ about the status of the key service: type, description and permissions. The payload of the key is not available this way: - SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY - 00000001 I----- 39 perm 1f0000 0 0 keyring _uid_ses.0: 1/4 - 00000002 I----- 2 perm 1f0000 0 0 keyring _uid.0: empty - 00000007 I----- 1 perm 1f0000 0 0 keyring _pid.1: empty - 0000018d I----- 1 perm 1f0000 0 0 keyring _pid.412: empty - 000004d2 I--Q-- 1 perm 1f0000 32 -1 keyring _uid.32: 1/4 - 000004d3 I--Q-- 3 perm 1f0000 32 -1 keyring _uid_ses.32: empty - 00000892 I--QU- 1 perm 1f0000 0 0 user metal:copper: 0 - 00000893 I--Q-N 1 35s 1f0000 0 0 user metal:silver: 0 - 00000894 I--Q-- 1 10h 1f0000 0 0 user metal:gold: 0 + SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY + 00000001 I----- 39 perm 1f3f0000 0 0 keyring _uid_ses.0: 1/4 + 00000002 I----- 2 perm 1f3f0000 0 0 keyring _uid.0: empty + 00000007 I----- 1 perm 1f3f0000 0 0 keyring _pid.1: empty + 0000018d I----- 1 perm 1f3f0000 0 0 keyring _pid.412: empty + 000004d2 I--Q-- 1 perm 1f3f0000 32 -1 keyring _uid.32: 1/4 + 000004d3 I--Q-- 3 perm 1f3f0000 32 -1 keyring _uid_ses.32: empty + 00000892 I--QU- 1 perm 1f000000 0 0 user metal:copper: 0 + 00000893 I--Q-N 1 35s 1f3f0000 0 0 user metal:silver: 0 + 00000894 I--Q-- 1 10h 003f0000 0 0 user metal:gold: 0 The flags are: @@ -361,6 +365,8 @@ The main syscalls are: /sbin/request-key will be invoked in an attempt to obtain a key. The callout_info string will be passed as an argument to the program. + See also Documentation/keys-request-key.txt. + The keyctl syscall functions are: @@ -533,8 +539,8 @@ The keyctl syscall functions are: (*) Read the payload data from a key: - key_serial_t keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, - size_t buflen); + long keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, + size_t buflen); This function attempts to read the payload data from the specified key into the buffer. The process must have read permission on the key to @@ -555,9 +561,9 @@ The keyctl syscall functions are: (*) Instantiate a partially constructed key. - key_serial_t keyctl(KEYCTL_INSTANTIATE, key_serial_t key, - const void *payload, size_t plen, - key_serial_t keyring); + long keyctl(KEYCTL_INSTANTIATE, key_serial_t key, + const void *payload, size_t plen, + key_serial_t keyring); If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call to supply data for the key before the @@ -576,8 +582,8 @@ The keyctl syscall functions are: (*) Negatively instantiate a partially constructed key. - key_serial_t keyctl(KEYCTL_NEGATE, key_serial_t key, - unsigned timeout, key_serial_t keyring); + long keyctl(KEYCTL_NEGATE, key_serial_t key, + unsigned timeout, key_serial_t keyring); If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call mark the key as negative before the @@ -637,6 +643,34 @@ call, and the key released upon close. How to deal with conflicting keys due to two different users opening the same file is left to the filesystem author to solve. +Note that there are two different types of pointers to keys that may be +encountered: + + (*) struct key * + + This simply points to the key structure itself. Key structures will be at + least four-byte aligned. + + (*) key_ref_t + + This is equivalent to a struct key *, but the least significant bit is set + if the caller "possesses" the key. By "possession" it is meant that the + calling processes has a searchable link to the key from one of its + keyrings. There are three functions for dealing with these: + + key_ref_t make_key_ref(const struct key *key, + unsigned long possession); + + struct key *key_ref_to_ptr(const key_ref_t key_ref); + + unsigned long is_key_possessed(const key_ref_t key_ref); + + The first function constructs a key reference from a key pointer and + possession information (which must be 0 or 1 and not any other value). + + The second function retrieves the key pointer from a reference and the + third retrieves the possession flag. + When accessing a key's payload contents, certain precautions must be taken to prevent access vs modification races. See the section "Notes on accessing payload contents" for more information. @@ -660,12 +694,18 @@ payload contents" for more information. If successful, the key will have been attached to the default keyring for implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING. + See also Documentation/keys-request-key.txt. + (*) When it is no longer required, the key should be released using: void key_put(struct key *key); - This can be called from interrupt context. If CONFIG_KEYS is not set then + Or: + + void key_ref_put(key_ref_t key_ref); + + These can be called from interrupt context. If CONFIG_KEYS is not set then the argument will not be parsed. @@ -689,13 +729,17 @@ payload contents" for more information. (*) If a keyring was found in the search, this can be further searched by: - struct key *keyring_search(struct key *keyring, - const struct key_type *type, - const char *description) + key_ref_t keyring_search(key_ref_t keyring_ref, + const struct key_type *type, + const char *description) This searches the keyring tree specified for a matching key. Error ENOKEY - is returned upon failure. If successful, the returned key will need to be - released. + is returned upon failure (use IS_ERR/PTR_ERR to determine). If successful, + the returned key will need to be released. + + The possession attribute from the keyring reference is used to control + access through the permissions mask and is propagated to the returned key + reference pointer if successful. (*) To check the validity of a key, this function can be called: @@ -732,7 +776,7 @@ More complex payload contents must be allocated and a pointer to them set in key->payload.data. One of the following ways must be selected to access the data: - (1) Unmodifyable key type. + (1) Unmodifiable key type. If the key type does not have a modify method, then the key's payload can be accessed without any form of locking, provided that it's known to be diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index e191baa..d5d3f06 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -626,7 +626,7 @@ ignored (others aren't affected). can be performed in optimal order. Not all SCSI devices support tagged queuing (:-(). -4.6 switches= +4.5 switches= ------------- Syntax: switches=<list of switches> @@ -661,28 +661,6 @@ correctly. earlier initialization ("ov_"-less) takes precedence. But the switching-off on reset still happens in this case. -4.5) stram_swap= ----------------- - -Syntax: stram_swap=<do_swap>[,<max_swap>] - - This option is available only if the kernel has been compiled with -CONFIG_STRAM_SWAP enabled. Normally, the kernel then determines -dynamically whether to actually use ST-RAM as swap space. (Currently, -the fraction of ST-RAM must be less or equal 1/3 of total memory to -enable this swapping.) You can override the kernel's decision by -specifying this option. 1 for <do_swap> means always enable the swap, -even if you have less alternate RAM. 0 stands for never swap to -ST-RAM, even if it's small enough compared to the rest of memory. - - If ST-RAM swapping is enabled, the kernel usually uses all free -ST-RAM as swap "device". If the kernel resides in ST-RAM, the region -allocated by it is obviously never used for swapping :-) You can also -limit this amount by specifying the second parameter, <max_swap>, if -you want to use parts of ST-RAM as normal system memory. <max_swap> is -in kBytes and the number should be a multiple of 4 (otherwise: rounded -down). - 5) Options for Amiga Only: ========================== diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt index bd8eefa..af67fac 100644 --- a/Documentation/magic-number.txt +++ b/Documentation/magic-number.txt @@ -120,7 +120,7 @@ ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_li SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c -SLAB_C_MAGIC 0x4f17a36d kmem_cache_s mm/slab.c +SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c I810_CARD_MAGIC 0x5072696E i810_card sound/oss/i810_audio.c TRIDENT_CARD_MAGIC 0x5072696E trident_card sound/oss/trident.c diff --git a/Documentation/mca.txt b/Documentation/mca.txt index 6e32c30..6091335 100644 --- a/Documentation/mca.txt +++ b/Documentation/mca.txt @@ -252,7 +252,7 @@ their names here, but I don't have a list handy. Check the MCA Linux home page (URL below) for a perpetually out-of-date list. ===================================================================== -MCA Linux Home Page: http://glycerine.itsmm.uni.edu/mca/ +MCA Linux Home Page: http://www.dgmicro.com/mca/ Christophe Beauregard chrisb@truespectra.com diff --git a/Documentation/md.txt b/Documentation/md.txt index e2b5369..23e6cce 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -116,3 +116,122 @@ and it's role in the array. Once started with RUN_ARRAY, uninitialized spares can be added with HOT_ADD_DISK. + + + +MD devices in sysfs +------------------- +md devices appear in sysfs (/sys) as regular block devices, +e.g. + /sys/block/md0 + +Each 'md' device will contain a subdirectory called 'md' which +contains further md-specific information about the device. + +All md devices contain: + level + a text file indicating the 'raid level'. This may be a standard + numerical level prefixed by "RAID-" - e.g. "RAID-5", or some + other name such as "linear" or "multipath". + If no raid level has been set yet (array is still being + assembled), this file will be empty. + + raid_disks + a text file with a simple number indicating the number of devices + in a fully functional array. If this is not yet known, the file + will be empty. If an array is being resized (not currently + possible) this will contain the larger of the old and new sizes. + +As component devices are added to an md array, they appear in the 'md' +directory as new directories named + dev-XXX +where XXX is a name that the kernel knows for the device, e.g. hdb1. +Each directory contains: + + block + a symlink to the block device in /sys/block, e.g. + /sys/block/md0/md/dev-hdb1/block -> ../../../../block/hdb/hdb1 + + super + A file containing an image of the superblock read from, or + written to, that device. + + state + A file recording the current state of the device in the array + which can be a comma separated list of + faulty - device has been kicked from active use due to + a detected fault + in_sync - device is a fully in-sync member of the array + spare - device is working, but not a full member. + This includes spares that are in the process + of being recoverred to + This list make grow in future. + + +An active md device will also contain and entry for each active device +in the array. These are named + + rdNN + +where 'NN' is the possition in the array, starting from 0. +So for a 3 drive array there will be rd0, rd1, rd2. +These are symbolic links to the appropriate 'dev-XXX' entry. +Thus, for example, + cat /sys/block/md*/md/rd*/state +will show 'in_sync' on every line. + + + +Active md devices for levels that support data redundancy (1,4,5,6) +also have + + sync_action + a text file that can be used to monitor and control the rebuild + process. It contains one word which can be one of: + resync - redundancy is being recalculated after unclean + shutdown or creation + recover - a hot spare is being built to replace a + failed/missing device + idle - nothing is happening + check - A full check of redundancy was requested and is + happening. This reads all block and checks + them. A repair may also happen for some raid + levels. + repair - A full check and repair is happening. This is + similar to 'resync', but was requested by the + user, and the write-intent bitmap is NOT used to + optimise the process. + + This file is writable, and each of the strings that could be + read are meaningful for writing. + + 'idle' will stop an active resync/recovery etc. There is no + guarantee that another resync/recovery may not be automatically + started again, though some event will be needed to trigger + this. + 'resync' or 'recovery' can be used to restart the + corresponding operation if it was stopped with 'idle'. + 'check' and 'repair' will start the appropriate process + providing the current state is 'idle'. + + mismatch_count + When performing 'check' and 'repair', and possibly when + performing 'resync', md will count the number of errors that are + found. The count in 'mismatch_cnt' is the number of sectors + that were re-written, or (for 'check') would have been + re-written. As most raid levels work in units of pages rather + than sectors, this my be larger than the number of actual errors + by a factor of the number of sectors in a page. + +Each active md device may also have attributes specific to the +personality module that manages it. +These are specific to the implementation of the module and could +change substantially if the implementation changes. + +These currently include + + stripe_cache_size (currently raid5 only) + number of entries in the stripe cache. This is writable, but + there are upper and lower limits (32768, 16). Default is 128. + strip_cache_active (currently raid5 only) + number of active entries in the stripe cache diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README new file mode 100644 index 0000000..a7e4c4e --- /dev/null +++ b/Documentation/mips/AU1xxx_IDE.README @@ -0,0 +1,168 @@ +README for MIPS AU1XXX IDE driver - Released 2005-07-15 + +ABOUT +----- +This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the +services they provide. + +If you are short in patience and just want to know how to add your hard disc to +the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST' +section. + + +LICENSE +------- + +Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions + +This program is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to the Free Software Foundation, Inc., +675 Mass Ave, Cambridge, MA 02139, USA. + +Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE + Interface and Linux Device Driver" Application Note. + + +FILES, CONFIGS AND COMPATABILITY +-------------------------------- + +Two files are introduced: + + a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h' + containes : struct _auide_hwif + struct drive_list_entry dma_white_list + struct drive_list_entry dma_black_list + timing parameters for PIO mode 0/1/2/3/4 + timing parameters for MWDMA 0/1/2 + + b) 'drivers/ide/mips/au1xxx-ide.c' + contains the functionality of the AU1XXX IDE driver + +Four configs variables are introduced: + + CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode + CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode + CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA + controler + CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size + per descriptor + +If MWDMA is enabled and the connected hard disc is not on the white list, the +kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE +performance is substantial slower then in full speed mwdma. In this case +please add your hard disc to the white list (follow instruction from 'ADD NEW +HARD DISC TO WHITE OR BLACK LIST' section). + + +SUPPORTED IDE MODES +------------------- + +The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all +MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode. + +To change the PIO mode use the program hdparm with option -p, e.g. +'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option +-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0. + + +PERFORMANCE CONFIGURATIONS +-------------------------- + +If the used system doesn't need USB support enable the following kernel configs: + +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +CONFIG_IDEDMA_PCI_AUTO=y +CONFIG_BLK_DEV_IDE_AU1XXX=y +CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y +CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y +CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDEDMA_AUTO=y + +If the used system need the USB support enable the following kernel configs for +high IDE to USB throughput. + +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +CONFIG_IDEDMA_PCI_AUTO=y +CONFIG_BLK_DEV_IDE_AU1XXX=y +CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y +CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDEDMA_AUTO=y + + +ADD NEW HARD DISC TO WHITE OR BLACK LIST +---------------------------------------- + +Step 1 : detect the model name of your hard disc + + a) connect your hard disc to the AU1XXX + + b) boot your kernel and get the hard disc model. + + Example boot log: + + --snipped-- + Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 + ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx + Au1xxx IDE(builtin) configured for MWDMA2 + Probing IDE interface ide0... + hda: Maxtor 6E040L0, ATA DISK drive + ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64 + hda: max request size: 64KiB + hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA + --snipped-- + + In this example 'Maxtor 6E040L0'. + +Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h' + + Add your hard disc to the dma_white_list or dma_black_list structur. + +Step 3 : Recompile the kernel + + Enable MWDMA support in the kernel configuration. Recompile the kernel and + reboot. + +Step 4 : Tests + + If you have add a hard disc to the white list, please run some stress tests + for verification. + + +ACKNOWLEDGMENTS +--------------- + +These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX +IDE driver from AMD. + +Additional input also from: +Matthias Lenk <matthias.lenk@amd.com> + +Happy hacking! +Enrico Walther <enrico.walther@amd.com> diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/README.ipw2100 index 2046948..3ab4037 100644 --- a/Documentation/networking/README.ipw2100 +++ b/Documentation/networking/README.ipw2100 @@ -1,27 +1,82 @@ -=========================== -Intel(R) PRO/Wireless 2100 Network Connection Driver for Linux +Intel(R) PRO/Wireless 2100 Driver for Linux in support of: + +Intel(R) PRO/Wireless 2100 Network Connection + +Copyright (C) 2003-2005, Intel Corporation + README.ipw2100 -March 14, 2005 +Version: 1.1.3 +Date : October 17, 2005 -=========================== Index ---------------------------- -0. Introduction -1. Release 1.1.0 Current Features -2. Command Line Parameters -3. Sysfs Helper Files -4. Radio Kill Switch -5. Dynamic Firmware -6. Power Management -7. Support -8. License - - -=========================== -0. Introduction ------------- ----- ----- ---- --- -- - +----------------------------------------------- +0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER +1. Introduction +2. Release 1.1.3 Current Features +3. Command Line Parameters +4. Sysfs Helper Files +5. Radio Kill Switch +6. Dynamic Firmware +7. Power Management +8. Support +9. License + + +0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER +----------------------------------------------- + +Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! + +Intel wireless LAN adapters are engineered, manufactured, tested, and +quality checked to ensure that they meet all necessary local and +governmental regulatory agency requirements for the regions that they +are designated and/or marked to ship into. Since wireless LANs are +generally unlicensed devices that share spectrum with radars, +satellites, and other licensed and unlicensed devices, it is sometimes +necessary to dynamically detect, avoid, and limit usage to avoid +interference with these devices. In many instances Intel is required to +provide test data to prove regional and local compliance to regional and +governmental regulations before certification or approval to use the +product is granted. Intel's wireless LAN's EEPROM, firmware, and +software driver are designed to carefully control parameters that affect +radio operation and to ensure electromagnetic compliance (EMC). These +parameters include, without limitation, RF power, spectrum usage, +channel scanning, and human exposure. + +For these reasons Intel cannot permit any manipulation by third parties +of the software provided in binary format with the wireless WLAN +adapters (e.g., the EEPROM and firmware). Furthermore, if you use any +patches, utilities, or code with the Intel wireless LAN adapters that +have been manipulated by an unauthorized party (i.e., patches, +utilities, or code (including open source code modifications) which have +not been validated by Intel), (i) you will be solely responsible for +ensuring the regulatory compliance of the products, (ii) Intel will bear +no liability, under any theory of liability for any issues associated +with the modified products, including without limitation, claims under +the warranty and/or issues arising from regulatory non-compliance, and +(iii) Intel will not provide or be required to assist in providing +support to any third parties for such modified products. + +Note: Many regulatory agencies consider Wireless LAN adapters to be +modules, and accordingly, condition system-level regulatory approval +upon receipt and review of test data documenting that the antennas and +system configuration do not cause the EMC and radio operation to be +non-compliant. + +The drivers available for download from SourceForge are provided as a +part of a development project. Conformance to local regulatory +requirements is the responsibility of the individual developer. As +such, if you are interested in deploying or shipping a driver as part of +solution intended to be used for purposes other than development, please +obtain a tested driver from Intel Customer Support at: + +http://support.intel.com/support/notebook/sb/CS-006408.htm + + +1. Introduction +----------------------------------------------- This document provides a brief overview of the features supported by the IPW2100 driver project. The main project website, where the latest @@ -34,9 +89,8 @@ potential fixes and patches, as well as links to the development mailing list for the driver project. -=========================== -1. Release 1.1.0 Current Supported Features ---------------------------- +2. Release 1.1.3 Current Supported Features +----------------------------------------------- - Managed (BSS) and Ad-Hoc (IBSS) - WEP (shared key and open) - Wireless Tools support @@ -51,9 +105,8 @@ on the amount of validation and interoperability testing that has been performed on a given feature. -=========================== -2. Command Line Parameters ---------------------------- +3. Command Line Parameters +----------------------------------------------- If the driver is built as a module, the following optional parameters are used by entering them on the command line with the modprobe command using this @@ -75,9 +128,9 @@ associate boolean associate=0 /* Do NOT auto associate */ disable boolean disable=1 /* Do not power the HW */ -=========================== -3. Sysfs Helper Files +4. Sysfs Helper Files --------------------------- +----------------------------------------------- There are several ways to control the behavior of the driver. Many of the general capabilities are exposed through the Wireless Tools (iwconfig). There @@ -120,9 +173,8 @@ For the device level files, see /sys/bus/pci/drivers/ipw2100: based RF kill from ON -> OFF -> ON, the radio will NOT come back on -=========================== -4. Radio Kill Switch ---------------------------- +5. Radio Kill Switch +----------------------------------------------- Most laptops provide the ability for the user to physically disable the radio. Some vendors have implemented this as a physical switch that requires no software to turn the radio off and on. On other laptops, however, the switch @@ -134,9 +186,8 @@ See the Sysfs helper file 'rf_kill' for determining the state of the RF switch on your system. -=========================== -5. Dynamic Firmware ---------------------------- +6. Dynamic Firmware +----------------------------------------------- As the firmware is licensed under a restricted use license, it can not be included within the kernel sources. To enable the IPW2100 you will need a firmware image to load into the wireless NIC's processors. @@ -146,9 +197,8 @@ You can obtain these images from <http://ipw2100.sf.net/firmware.php>. See INSTALL for instructions on installing the firmware. -=========================== -6. Power Management ---------------------------- +7. Power Management +----------------------------------------------- The IPW2100 supports the configuration of the Power Save Protocol through a private wireless extension interface. The IPW2100 supports the following different modes: @@ -200,9 +250,8 @@ xxxx/yyyy will be replaced with 'off' -- the level reported will be the active level if `iwconfig eth1 power on` is invoked. -=========================== -7. Support ---------------------------- +8. Support +----------------------------------------------- For general development information and support, go to: @@ -218,9 +267,8 @@ For installation support on the ipw2100 1.1.0 driver on Linux kernels http://supportmail.intel.com -=========================== -8. License ---------------------------- +9. License +----------------------------------------------- Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200 index 6916080..c6492d3 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/README.ipw2200 @@ -1,33 +1,89 @@ Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of: -Intel(R) PRO/Wireless 2200BG Network Connection -Intel(R) PRO/Wireless 2915ABG Network Connection +Intel(R) PRO/Wireless 2200BG Network Connection +Intel(R) PRO/Wireless 2915ABG Network Connection -Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R) -PRO/Wireless 2200BG Driver for Linux is a unified driver that works on -both hardware adapters listed above. In this document the Intel(R) -PRO/Wireless 2915ABG Driver for Linux will be used to reference the +Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R) +PRO/Wireless 2200BG Driver for Linux is a unified driver that works on +both hardware adapters listed above. In this document the Intel(R) +PRO/Wireless 2915ABG Driver for Linux will be used to reference the unified driver. Copyright (C) 2004-2005, Intel Corporation README.ipw2200 -Version: 1.0.0 -Date : January 31, 2005 +Version: 1.0.8 +Date : October 20, 2005 Index ----------------------------------------------- +0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER 1. Introduction 1.1. Overview of features 1.2. Module parameters 1.3. Wireless Extension Private Methods 1.4. Sysfs Helper Files -2. About the Version Numbers -3. Support -4. License +2. Ad-Hoc Networking +3. Interacting with Wireless Tools +3.1. iwconfig mode +4. About the Version Numbers +5. Firmware installation +6. Support +7. License + + +0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER +----------------------------------------------- + +Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! + +Intel wireless LAN adapters are engineered, manufactured, tested, and +quality checked to ensure that they meet all necessary local and +governmental regulatory agency requirements for the regions that they +are designated and/or marked to ship into. Since wireless LANs are +generally unlicensed devices that share spectrum with radars, +satellites, and other licensed and unlicensed devices, it is sometimes +necessary to dynamically detect, avoid, and limit usage to avoid +interference with these devices. In many instances Intel is required to +provide test data to prove regional and local compliance to regional and +governmental regulations before certification or approval to use the +product is granted. Intel's wireless LAN's EEPROM, firmware, and +software driver are designed to carefully control parameters that affect +radio operation and to ensure electromagnetic compliance (EMC). These +parameters include, without limitation, RF power, spectrum usage, +channel scanning, and human exposure. + +For these reasons Intel cannot permit any manipulation by third parties +of the software provided in binary format with the wireless WLAN +adapters (e.g., the EEPROM and firmware). Furthermore, if you use any +patches, utilities, or code with the Intel wireless LAN adapters that +have been manipulated by an unauthorized party (i.e., patches, +utilities, or code (including open source code modifications) which have +not been validated by Intel), (i) you will be solely responsible for +ensuring the regulatory compliance of the products, (ii) Intel will bear +no liability, under any theory of liability for any issues associated +with the modified products, including without limitation, claims under +the warranty and/or issues arising from regulatory non-compliance, and +(iii) Intel will not provide or be required to assist in providing +support to any third parties for such modified products. + +Note: Many regulatory agencies consider Wireless LAN adapters to be +modules, and accordingly, condition system-level regulatory approval +upon receipt and review of test data documenting that the antennas and +system configuration do not cause the EMC and radio operation to be +non-compliant. + +The drivers available for download from SourceForge are provided as a +part of a development project. Conformance to local regulatory +requirements is the responsibility of the individual developer. As +such, if you are interested in deploying or shipping a driver as part of +solution intended to be used for purposes other than development, please +obtain a tested driver from Intel Customer Support at: + +http://support.intel.com/support/notebook/sb/CS-006408.htm 1. Introduction @@ -45,7 +101,7 @@ file. 1.1. Overview of Features ----------------------------------------------- -The current release (1.0.0) supports the following features: +The current release (1.0.8) supports the following features: + BSS mode (Infrastructure, Managed) + IBSS mode (Ad-Hoc) @@ -56,17 +112,27 @@ The current release (1.0.0) supports the following features: + Full A rate support (2915 only) + Transmit power control + S state support (ACPI suspend/resume) + +The following features are currently enabled, but not officially +supported: + ++ WPA + long/short preamble support ++ Monitor mode (aka RFMon) + +The distinction between officially supported and enabled is a reflection +on the amount of validation and interoperability testing that has been +performed on a given feature. 1.2. Command Line Parameters ----------------------------------------------- -Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless -2915ABG Driver for Linux allows certain configuration options to be -provided as module parameters. The most common way to specify a module -parameter is via the command line. +Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless +2915ABG Driver for Linux allows configuration options to be provided +as module parameters. The most common way to specify a module parameter +is via the command line. The general form is: @@ -96,14 +162,18 @@ Where the supported parameter are: debug If using a debug build, this is used to control the amount of debug - info is logged. See the 'dval' and 'load' script for more info on - how to use this (the dval and load scripts are provided as part + info is logged. See the 'dvals' and 'load' script for more info on + how to use this (the dvals and load scripts are provided as part of the ipw2200 development snapshot releases available from the SourceForge project at http://ipw2200.sf.net) + + led + Can be used to turn on experimental LED code. + 0 = Off, 1 = On. Default is 0. mode Can be used to set the default mode of the adapter. - 0 = Managed, 1 = Ad-Hoc + 0 = Managed, 1 = Ad-Hoc, 2 = Monitor 1.3. Wireless Extension Private Methods @@ -164,8 +234,8 @@ The supported private methods are: ----------------------------------------------- The Linux kernel provides a pseudo file system that can be used to -access various components of the operating system. The Intel(R) -PRO/Wireless 2915ABG Driver for Linux exposes several configuration +access various components of the operating system. The Intel(R) +PRO/Wireless 2915ABG Driver for Linux exposes several configuration parameters through this mechanism. An entry in the sysfs can support reading and/or writing. You can @@ -184,13 +254,13 @@ You can set the debug level via: Where $VALUE would be a number in the case of this sysfs entry. The input to sysfs files does not have to be a number. For example, the -firmware loader used by hotplug utilizes sysfs entries for transferring +firmware loader used by hotplug utilizes sysfs entries for transfering the firmware image from user space into the driver. The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries -at two levels -- driver level, which apply to all instances of the -driver (in the event that there are more than one device installed) and -device level, which applies only to the single specific instance. +at two levels -- driver level, which apply to all instances of the driver +(in the event that there are more than one device installed) and device +level, which applies only to the single specific instance. 1.4.1 Driver Level Sysfs Helper Files @@ -203,6 +273,7 @@ For the driver level files, look in /sys/bus/pci/drivers/ipw2200/ This controls the same global as the 'debug' module parameter + 1.4.2 Device Level Sysfs Helper Files ----------------------------------------------- @@ -213,7 +284,7 @@ For the device level files, look in For example: /sys/bus/pci/drivers/ipw2200/0000:02:01.0 -For the device level files, see /sys/bus/pci/[drivers/ipw2200: +For the device level files, see /sys/bus/pci/drivers/ipw2200: rf_kill read - @@ -231,8 +302,59 @@ For the device level files, see /sys/bus/pci/[drivers/ipw2200: ucode read-only access to the ucode version number + led + read - + 0 = LED code disabled + 1 = LED code enabled + write - + 0 = Disable LED code + 1 = Enable LED code + + NOTE: The LED code has been reported to hang some systems when + running ifconfig and is therefore disabled by default. + + +2. Ad-Hoc Networking +----------------------------------------------- + +When using a device in an Ad-Hoc network, it is useful to understand the +sequence and requirements for the driver to be able to create, join, or +merge networks. + +The following attempts to provide enough information so that you can +have a consistent experience while using the driver as a member of an +Ad-Hoc network. + +2.1. Joining an Ad-Hoc Network +----------------------------------------------- + +The easiest way to get onto an Ad-Hoc network is to join one that +already exists. -2. About the Version Numbers +2.2. Creating an Ad-Hoc Network +----------------------------------------------- + +An Ad-Hoc networks is created using the syntax of the Wireless tool. + +For Example: +iwconfig eth1 mode ad-hoc essid testing channel 2 + +2.3. Merging Ad-Hoc Networks +----------------------------------------------- + + +3. Interaction with Wireless Tools +----------------------------------------------- + +3.1 iwconfig mode +----------------------------------------------- + +When configuring the mode of the adapter, all run-time configured parameters +are reset to the value used when the module was loaded. This includes +channels, rates, ESSID, etc. + + +4. About the Version Numbers ----------------------------------------------- Due to the nature of open source development projects, there are @@ -259,12 +381,23 @@ available as quickly as possible, unknown anomalies should be expected. The major version number will be incremented when significant changes are made to the driver. Currently, there are no major changes planned. +5. Firmware installation +---------------------------------------------- + +The driver requires a firmware image, download it and extract the +files under /lib/firmware (or wherever your hotplug's firmware.agent +will look for firmware files) + +The firmware can be downloaded from the following URL: -3. Support + http://ipw2200.sf.net/ + + +6. Support ----------------------------------------------- -For installation support of the 1.0.0 version, you can contact -http://supportmail.intel.com, or you can use the open source project +For direct support of the 1.0.0 version, you can contact +http://supportmail.intel.com, or you can use the open source project support. For general information and support, go to: @@ -272,7 +405,7 @@ For general information and support, go to: http://ipw2200.sf.net/ -4. License +7. License ----------------------------------------------- Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. @@ -297,4 +430,3 @@ For general information and support, go to: James P. Ketrenos <ipw2100-admin@linux.intel.com> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index a55f0f9..b0fe41d 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -777,7 +777,7 @@ doing so is the same as described in the "Configuring Multiple Bonds Manually" section, below. NOTE: It has been observed that some Red Hat supplied kernels -are apparently unable to rename modules at load time (the "-obonding1" +are apparently unable to rename modules at load time (the "-o bond1" part). Attempts to pass that option to modprobe will produce an "Operation not permitted" error. This has been reported on some Fedora Core kernels, and has been seen on RHEL 4 as well. On kernels @@ -883,7 +883,8 @@ the above does not work, and the second bonding instance never sees its options. In that case, the second options line can be substituted as follows: -install bonding1 /sbin/modprobe bonding -obond1 mode=balance-alb miimon=50 +install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \ + mode=balance-alb miimon=50 This may be repeated any number of times, specifying a new and unique name in place of bond1 for each subsequent instance. diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt new file mode 100644 index 0000000..c45daab --- /dev/null +++ b/Documentation/networking/dccp.txt @@ -0,0 +1,56 @@ +DCCP protocol +============ + +Last updated: 10 November 2005 + +Contents +======== + +- Introduction +- Missing features +- Socket options +- Notes + +Introduction +============ + +Datagram Congestion Control Protocol (DCCP) is an unreliable, connection +based protocol designed to solve issues present in UDP and TCP particularly +for real time and multimedia traffic. + +It has a base protocol and pluggable congestion control IDs (CCIDs). + +It is at draft RFC status and the homepage for DCCP as a protocol is at: + http://www.icir.org/kohler/dcp/ + +Missing features +================ + +The DCCP implementation does not currently have all the features that are in +the draft RFC. + +In particular the following are missing: +- CCID2 support +- feature negotiation + +When testing against other implementations it appears that elapsed time +options are not coded compliant to the specification. + +Socket options +============== + +DCCP_SOCKOPT_PACKET_SIZE is used for CCID3 to set default packet size for +calculations. + +DCCP_SOCKOPT_SERVICE sets the service. This is compulsory as per the +specification. If you don't set it you will get EPROTO. + +Notes +===== + +SELinux does not yet have support for DCCP. You will need to turn it off or +else you will get EACCES. + +DCCP does not travel through NAT successfully at present. This is because +the checksum covers the psuedo-header as per TCP and UDP. It should be +relatively trivial to add Linux NAT support for DCCP. diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt index c6bd25f..e6c39c5 100644 --- a/Documentation/networking/decnet.txt +++ b/Documentation/networking/decnet.txt @@ -176,8 +176,6 @@ information (_most_ of which _is_ _essential_) includes: - Which client caused the problem ? - How much data was being transferred ? - Was the network congested ? - - If there was a kernel panic, please run the output through ksymoops - before sending it to me, otherwise its _useless_. - How can the problem be reproduced ? - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of tcpdump don't understand how to dump DECnet properly, so including diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt index 11fd0ef..a9ad58b 100644 --- a/Documentation/networking/driver.txt +++ b/Documentation/networking/driver.txt @@ -1,7 +1,4 @@ -Documents about softnet driver issues in general can be found -at: - - http://www.firstfloor.org/~andi/softnet/ +Document about softnet driver issues Transmit path guidelines: diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c index f315d20..545447a 100644 --- a/Documentation/networking/ifenslave.c +++ b/Documentation/networking/ifenslave.c @@ -693,13 +693,7 @@ static int enslave(char *master_ifname, char *slave_ifname) /* Older bonding versions would panic if the slave has no IP * address, so get the IP setting from the master. */ - res = set_if_addr(master_ifname, slave_ifname); - if (res) { - fprintf(stderr, - "Slave '%s': Error: set address failed\n", - slave_ifname); - return res; - } + set_if_addr(master_ifname, slave_ifname); } else { res = clear_if_addr(slave_ifname); if (res) { @@ -1085,7 +1079,6 @@ static int set_if_addr(char *master_ifname, char *slave_ifname) slave_ifname, ifra[i].req_name, strerror(saved_errno)); - return res; } ipaddr = ifr.ifr_addr.sa_data; diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ab65714..ebc09a1 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -78,6 +78,11 @@ inet_peer_gc_maxtime - INTEGER TCP variables: +tcp_abc - INTEGER + Controls Appropriate Byte Count defined in RFC3465. If set to + 0 then does congestion avoid once per ack. 1 is conservative + value, and 2 is more agressive. + tcp_syn_retries - INTEGER Number of times initial SYNs for an active TCP connection attempt will be retransmitted. Should not be higher than 255. Default value @@ -309,7 +314,7 @@ tcp_tso_win_divisor - INTEGER can be consumed by a single TSO frame. The setting of this parameter is a choice between burstiness and building larger TSO frames. - Default: 8 + Default: 3 tcp_frto - BOOLEAN Enables F-RTO, an enhanced recovery algorithm for TCP retransmission @@ -355,10 +360,14 @@ ip_dynaddr - BOOLEAN Default: 0 icmp_echo_ignore_all - BOOLEAN + If set non-zero, then the kernel will ignore all ICMP ECHO + requests sent to it. + Default: 0 + icmp_echo_ignore_broadcasts - BOOLEAN - If either is set to true, then the kernel will ignore either all - ICMP ECHO requests sent to it or just those to broadcast/multicast - addresses, respectively. + If set non-zero, then the kernel will ignore all ICMP ECHO and + TIMESTAMP requests sent to it via broadcast/multicast. + Default: 1 icmp_ratelimit - INTEGER Limit the maximal rates for sending ICMP packets whose type matches diff --git a/Documentation/networking/iphase.txt b/Documentation/networking/iphase.txt index 39ccb85..493203a 100644 --- a/Documentation/networking/iphase.txt +++ b/Documentation/networking/iphase.txt @@ -22,7 +22,7 @@ The features and limitations of this driver are as follows: - All variants of Interphase ATM PCI (i)Chip adapter cards are supported, including x575 (OC3, control memory 128K , 512K and packet memory 128K, 512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See - http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM + http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0 for details. - Only x86 platforms are supported. - SMP is supported. diff --git a/Documentation/networking/irda.txt b/Documentation/networking/irda.txt index 9e5b8e6..bff26c1 100644 --- a/Documentation/networking/irda.txt +++ b/Documentation/networking/irda.txt @@ -3,12 +3,8 @@ of the IrDA Utilities. More detailed information about these and associated programs can be found on http://irda.sourceforge.net/ For more information about how to use the IrDA protocol stack, see the -Linux Infared HOWTO (http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html) -by Werner Heuser <wehe@tuxmobil.org> +Linux Infrared HOWTO by Werner Heuser <wehe@tuxmobil.org>: +<http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html> There is an active mailing list for discussing Linux-IrDA matters called irda-users@lists.sourceforge.net - - - - diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt index b1def00..5427f8c 100644 --- a/Documentation/networking/ray_cs.txt +++ b/Documentation/networking/ray_cs.txt @@ -29,8 +29,7 @@ with nondefault parameters, they can be edited in will find them all. Information on card services is available at: - ftp://hyper.stanford.edu/pub/pcmcia/doc - http://hyper.stanford.edu/HyperNews/get/pcmcia/home.html + http://pcmcia-cs.sourceforge.net/ Card services user programs are still required for PCMCIA devices. diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index 6726b52..bd528ff 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -1,48 +1,153 @@ -S2IO Technologies XFrame 10 Gig adapter. -------------------------------------------- - -I. Module loadable parameters. -When loaded as a module, the driver provides a host of Module loadable -parameters, so the device can be tuned as per the users needs. -A list of the Module params is given below. -(i) ring_num: This can be used to program the number of - receive rings used in the driver. -(ii) ring_len: This defines the number of descriptors each ring - can have. There can be a maximum of 8 rings. -(iii) frame_len: This is an array of size 8. Using this we can - set the maximum size of the received frame that can - be steered into the corrsponding receive ring. -(iv) fifo_num: This defines the number of Tx FIFOs thats used in - the driver. -(v) fifo_len: Each element defines the number of - Tx descriptors that can be associated with each - corresponding FIFO. There are a maximum of 8 FIFOs. -(vi) tx_prio: This is a bool, if module is loaded with a non-zero - value for tx_prio multi FIFO scheme is activated. -(vii) rx_prio: This is a bool, if module is loaded with a non-zero - value for tx_prio multi RING scheme is activated. -(viii) latency_timer: The value given against this param will be - loaded into the latency timer register in PCI Config - space, else the register is left with its reset value. - -II. Performance tuning. - By changing a few sysctl parameters. - Copy the following lines into a file and run the following command, - "sysctl -p <file_name>" -### IPV4 specific settings -net.ipv4.tcp_timestamps = 0 # turns TCP timestamp support off, default 1, reduces CPU use -net.ipv4.tcp_sack = 0 # turn SACK support off, default on -# on systems with a VERY fast bus -> memory interface this is the big gainer -net.ipv4.tcp_rmem = 10000000 10000000 10000000 # sets min/default/max TCP read buffer, default 4096 87380 174760 -net.ipv4.tcp_wmem = 10000000 10000000 10000000 # sets min/pressure/max TCP write buffer, default 4096 16384 131072 -net.ipv4.tcp_mem = 10000000 10000000 10000000 # sets min/pressure/max TCP buffer space, default 31744 32256 32768 - -### CORE settings (mostly for socket and UDP effect) -net.core.rmem_max = 524287 # maximum receive socket buffer size, default 131071 -net.core.wmem_max = 524287 # maximum send socket buffer size, default 131071 -net.core.rmem_default = 524287 # default receive socket buffer size, default 65535 -net.core.wmem_default = 524287 # default send socket buffer size, default 65535 -net.core.optmem_max = 524287 # maximum amount of option memory buffers, default 10240 -net.core.netdev_max_backlog = 300000 # number of unprocessed input packets before kernel starts dropping them, default 300 ----End of performance tuning file--- +Release notes for Neterion's (Formerly S2io) Xframe I/II PCI-X 10GbE driver. + +Contents +======= +- 1. Introduction +- 2. Identifying the adapter/interface +- 3. Features supported +- 4. Command line parameters +- 5. Performance suggestions +- 6. Available Downloads + + +1. Introduction: +This Linux driver supports Neterion's Xframe I PCI-X 1.0 and +Xframe II PCI-X 2.0 adapters. It supports several features +such as jumbo frames, MSI/MSI-X, checksum offloads, TSO, UFO and so on. +See below for complete list of features. +All features are supported for both IPv4 and IPv6. + +2. Identifying the adapter/interface: +a. Insert the adapter(s) in your system. +b. Build and load driver +# insmod s2io.ko +c. View log messages +# dmesg | tail -40 +You will see messages similar to: +eth3: Neterion Xframe I 10GbE adapter (rev 3), Version 2.0.9.1, Intr type INTA +eth4: Neterion Xframe II 10GbE adapter (rev 2), Version 2.0.9.1, Intr type INTA +eth4: Device is on 64 bit 133MHz PCIX(M1) bus + +The above messages identify the adapter type(Xframe I/II), adapter revision, +driver version, interface name(eth3, eth4), Interrupt type(INTA, MSI, MSI-X). +In case of Xframe II, the PCI/PCI-X bus width and frequency are displayed +as well. + +To associate an interface with a physical adapter use "ethtool -p <ethX>". +The corresponding adapter's LED will blink multiple times. + +3. Features supported: +a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes, +modifiable using ifconfig command. + +b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit +and receive, TSO. + +c. Multi-buffer receive mode. Scattering of packet across multiple +buffers. Currently driver supports 2-buffer mode which yields +significant performance improvement on certain platforms(SGI Altix, +IBM xSeries). + +d. MSI/MSI-X. Can be enabled on platforms which support this feature +(IA64, Xeon) resulting in noticeable performance improvement(upto 7% +on certain platforms). + +e. NAPI. Compile-time option(CONFIG_S2IO_NAPI) for better Rx interrupt +moderation. + +f. Statistics. Comprehensive MAC-level and software statistics displayed +using "ethtool -S" option. + +g. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings, +with multiple steering options. + +4. Command line parameters +a. tx_fifo_num +Number of transmit queues +Valid range: 1-8 +Default: 1 + +b. rx_ring_num +Number of receive rings +Valid range: 1-8 +Default: 1 + +c. tx_fifo_len +Size of each transmit queue +Valid range: Total length of all queues should not exceed 8192 +Default: 4096 + +d. rx_ring_sz +Size of each receive ring(in 4K blocks) +Valid range: Limited by memory on system +Default: 30 + +e. intr_type +Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X) +Valid range: 1-3 +Default: 1 + +5. Performance suggestions +General: +a. Set MTU to maximum(9000 for switch setup, 9600 in back-to-back configuration) +b. Set TCP windows size to optimal value. +For instance, for MTU=1500 a value of 210K has been observed to result in +good performance. +# sysctl -w net.ipv4.tcp_rmem="210000 210000 210000" +# sysctl -w net.ipv4.tcp_wmem="210000 210000 210000" +For MTU=9000, TCP window size of 10 MB is recommended. +# sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" +# sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" + +Transmit performance: +a. By default, the driver respects BIOS settings for PCI bus parameters. +However, you may want to experiment with PCI bus parameters +max-split-transactions(MOST) and MMRBC (use setpci command). +A MOST value of 2 has been found optimal for Opterons and 3 for Itanium. +It could be different for your hardware. +Set MMRBC to 4K**. + +For example you can set +For opteron +#setpci -d 17d5:* 62=1d +For Itanium +#setpci -d 17d5:* 62=3d + +For detailed description of the PCI registers, please see Xframe User Guide. + +b. Ensure Transmit Checksum offload is enabled. Use ethtool to set/verify this +parameter. +c. Turn on TSO(using "ethtool -K") +# ethtool -K <ethX> tso on + +Receive performance: +a. By default, the driver respects BIOS settings for PCI bus parameters. +However, you may want to set PCI latency timer to 248. +#setpci -d 17d5:* LATENCY_TIMER=f8 +For detailed description of the PCI registers, please see Xframe User Guide. +b. Use 2-buffer mode. This results in large performance boost on +on certain platforms(eg. SGI Altix, IBM xSeries). +c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to +set/verify this option. +d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network +device support ---> Ethernet (10000 Mbit) ---> S2IO 10Gbe Xframe NIC) to +bring down CPU utilization. + +** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are +recommended as safe parameters. +For more information, please review the AMD8131 errata at +http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf + +6. Available Downloads +Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up +to date, also the latest "s2io" code (including support for 2.4 kernels) is +available via "Support" link on the Neterion site: http://www.neterion.com. + +For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com, +user: linuxdocs password: HALdocs + +7. Support +For further support please contact either your 10GbE Xframe NIC vendor (IBM, +HP, SGI etc.) or click on the "Support" link on the Neterion site: +http://www.neterion.com. diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index 80e1cb1..3759acf 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -11,7 +11,7 @@ The driver was written by Donald Becker <becker@scyld.com> Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: - Andrew Morton <andrewm@uow.edu.au> + Andrew Morton <akpm@osdl.org> Netdev mailing list <netdev@vger.kernel.org> Linux kernel mailing list <linux-kernel@vger.kernel.org> @@ -274,24 +274,24 @@ Details of the device driver implementation are at the top of the source file. Additional documentation is available at Don Becker's Linux Drivers site: - http://www.scyld.com/network/vortex.html + http://www.scyld.com/vortex.html Donald Becker's driver development site: - http://www.scyld.com/network + http://www.scyld.com/network.html Donald's vortex-diag program is useful for inspecting the NIC's state: - http://www.scyld.com/diag/#pci-diags + http://www.scyld.com/ethercard_diag.html Donald's mii-diag program may be used for inspecting and manipulating the NIC's Media Independent Interface subsystem: - http://www.scyld.com/diag/#mii-diag + http://www.scyld.com/ethercard_diag.html#mii-diag Donald's wake-on-LAN page: - http://www.scyld.com/expert/wake-on-lan.html + http://www.scyld.com/wakeonlan.html 3Com's documentation for many NICs, including the ones supported by this driver is available at @@ -305,7 +305,7 @@ this driver is available at Driver updates and a detailed changelog for the modifications which were made for the 2.3/2,4 series kernel is available at - http://www.uow.edu.au/~andrewm/linux/#3c59x-2.3 + http://www.zip.com.au/~akpm/linux/#3c59x-bc Autonegotiation notes @@ -434,8 +434,8 @@ steps you should take: send all logs to the maintainer. 3) Download you card's diagnostic tool from Donald - Backer's website http://www.scyld.com/diag. Download - mii-diag.c as well. Build these. + Becker's website <http://www.scyld.com/ethercard_diag.html>. + Download mii-diag.c as well. Build these. a) Run 'vortex-diag -aaee' and 'mii-diag -v' when the card is working correctly. Save the output. @@ -443,8 +443,8 @@ steps you should take: b) Run the above commands when the card is malfunctioning. Send both sets of output. -Finally, please be patient and be prepared to do some work. You may end up working on -this problem for a week or more as the maintainer asks more questions, asks for more -tests, asks for patches to be applied, etc. At the end of it all, the problem may even -remain unresolved. - +Finally, please be patient and be prepared to do some work. You may +end up working on this problem for a week or more as the maintainer +asks more questions, asks for more tests, asks for patches to be +applied, etc. At the end of it all, the problem may even remain +unresolved. diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt index 66eaaab..05960f8 100644 --- a/Documentation/oops-tracing.txt +++ b/Documentation/oops-tracing.txt @@ -1,6 +1,6 @@ NOTE: ksymoops is useless on 2.6. Please use the Oops in its original format (from dmesg, etc). Ignore any references in this or other docs to "decoding -the Oops" or "running it through ksymoops". If you post an Oops fron 2.6 that +the Oops" or "running it through ksymoops". If you post an Oops from 2.6 that has been run through ksymoops, people will just tell you to repost it. Quick Summary @@ -30,7 +30,12 @@ the disk is not available then you have three options :- (1) Hand copy the text from the screen and type it in after the machine has restarted. Messy but it is the only option if you have not - planned for a crash. + planned for a crash. Alternatively, you can take a picture of + the screen with a digital camera - not nice, but better than + nothing. If the messages scroll off the top of the console, you + may find that booting with a higher resolution (eg, vga=791) + will allow you to read more of the text. (Caveat: This needs vesafb, + so won't help for 'early' oopses) (2) Boot with a serial console (see Documentation/serial-console.txt), run a null modem to a second machine and capture the output there diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index 6fc9d51..73fc87e 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -335,5 +335,5 @@ this on the whole. PCI Local Bus Specification PCI Bus Power Management Interface Specification - http://pcisig.org + http://www.pcisig.com diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt index 526d6dd..912bed8 100644 --- a/Documentation/power/video.txt +++ b/Documentation/power/video.txt @@ -11,9 +11,9 @@ boot video card. (Kernel usually does not even contain video card driver -- vesafb and vgacon are widely used). This is not problem for swsusp, because during swsusp resume, BIOS is -run normally so video card is normally initialized. S3 has absolutely -no chance of working with SMP/HT. Be sure it to turn it off before -testing (swsusp should work ok, OTOH). +run normally so video card is normally initialized. It should not be +problem for S1 standby, because hardware should retain its state over +that. There are a few types of systems where video works after S3 resume: @@ -64,7 +64,7 @@ your video card (good luck getting docs :-(). Maybe suspending from X (proper X, knowing your hardware, not XF68_FBcon) might have better chance of working. -Table of known working systems: +Table of known working notebooks: Model hack (or "how to do it") ------------------------------------------------------------------------------ @@ -73,7 +73,7 @@ Acer TM 242FX vbetool (6) Acer TM C110 video_post (8) Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8) Acer TM 4052LCi s3_bios (2) -Acer TM 636Lci s3_bios vga=normal (2) +Acer TM 636Lci s3_bios,s3_mode (4) Acer TM 650 (Radeon M7) vga=normal plus boot-radeon (5) gets text console back Acer TM 660 ??? (*) Acer TM 800 vga=normal, X patches, see webpage (5) or vbetool (6) @@ -137,6 +137,13 @@ Toshiba Satellite P10-554 s3_bios,s3_mode (4)(****) Toshiba M30 (2) xor X with nvidia driver using internal AGP Uniwill 244IIO ??? (*) +Known working desktop systems +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Mainboard Graphics card hack (or "how to do it") +------------------------------------------------------------------------------ +Asus A7V8X nVidia RIVA TNT2 model 64 s3_bios,s3_mode (4) + (*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure which options to use. If you know, please tell me. diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index adbfe62..844c03f 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -871,7 +871,7 @@ by playing with the --adjust-vma parameter to objdump. -extern inline void spin_lock(spinlock_t *lp) +static inline void spin_lock(spinlock_t *lp) { a0: 18 34 lr %r3,%r4 a2: a7 3a 03 bc ahi %r3,956 diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt index 1946195..df09758 100644 --- a/Documentation/s390/driver-model.txt +++ b/Documentation/s390/driver-model.txt @@ -8,11 +8,10 @@ All devices which can be addressed by means of ccws are called 'CCW devices' - even if they aren't actually driven by ccws. All ccw devices are accessed via a subchannel, this is reflected in the -structures under root/: +structures under devices/: -root/ - - sys - - legacy +devices/ + - system/ - css0/ - 0.0.0000/0.0.0815/ - 0.0.0001/0.0.4711/ @@ -36,7 +35,7 @@ availability: Can be 'good' or 'boxed'; 'no path' or 'no device' for online: An interface to set the device online and offline. In the special case of the device being disconnected (see the - notify function under 1.2), piping 0 to online will focibly delete + notify function under 1.2), piping 0 to online will forcibly delete the device. The device drivers can add entries to export per-device data and interfaces. @@ -222,7 +221,7 @@ and are called 'chp0.<chpid>'. They have no driver and do not belong to any bus. Please note, that unlike /proc/chpids in 2.4, the channel path objects reflect only the logical state and not the physical state, since we cannot track the latter consistently due to lacking machine support (we don't need to be aware -of anyway). +of it anyway). status - Can be 'online' or 'offline'. Piping 'on' or 'off' sets the chpid logically online/offline. @@ -235,12 +234,16 @@ status - Can be 'online' or 'offline'. 3. System devices ----------------- -Note: cpus may yet be added here. - 3.1 xpram --------- -xpram shows up under sys/ as 'xpram'. +xpram shows up under devices/system/ as 'xpram'. + +3.2 cpus +-------- + +For each cpu, a directory is created under devices/system/cpu/. Each cpu has an +attribute 'online' which can be 0 or 1. 4. Other devices diff --git a/Documentation/sched-arch.txt b/Documentation/sched-arch.txt new file mode 100644 index 0000000..941615a --- /dev/null +++ b/Documentation/sched-arch.txt @@ -0,0 +1,89 @@ + CPU Scheduler implementation hints for architecture specific code + + Nick Piggin, 2005 + +Context switch +============== +1. Runqueue locking +By default, the switch_to arch function is called with the runqueue +locked. This is usually not a problem unless switch_to may need to +take the runqueue lock. This is usually due to a wake up operation in +the context switch. See include/asm-ia64/system.h for an example. + +To request the scheduler call switch_to with the runqueue unlocked, +you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file +(typically the one where switch_to is defined). + +Unlocked context switches introduce only a very minor performance +penalty to the core scheduler implementation in the CONFIG_SMP case. + +2. Interrupt status +By default, the switch_to arch function is called with interrupts +disabled. Interrupts may be enabled over the call if it is likely to +introduce a significant interrupt latency by adding the line +`#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for +unlocked context switches. This define also implies +`__ARCH_WANT_UNLOCKED_CTXSW`. See include/asm-arm/system.h for an +example. + + +CPU idle +======== +Your cpu_idle routines need to obey the following rules: + +1. Preempt should now disabled over idle routines. Should only + be enabled to call schedule() then disabled again. + +2. need_resched/TIF_NEED_RESCHED is only ever set, and will never + be cleared until the running task has called schedule(). Idle + threads need only ever query need_resched, and may never set or + clear it. + +3. When cpu_idle finds (need_resched() == 'true'), it should call + schedule(). It should not call schedule() otherwise. + +4. The only time interrupts need to be disabled when checking + need_resched is if we are about to sleep the processor until + the next interrupt (this doesn't provide any protection of + need_resched, it prevents losing an interrupt). + + 4a. Common problem with this type of sleep appears to be: + local_irq_disable(); + if (!need_resched()) { + local_irq_enable(); + *** resched interrupt arrives here *** + __asm__("sleep until next interrupt"); + } + +5. TIF_POLLING_NRFLAG can be set by idle routines that do not + need an interrupt to wake them up when need_resched goes high. + In other words, they must be periodically polling need_resched, + although it may be reasonable to do some background work or enter + a low CPU priority. + + 5a. If TIF_POLLING_NRFLAG is set, and we do decide to enter + an interrupt sleep, it needs to be cleared then a memory + barrier issued (followed by a test of need_resched with + interrupts disabled, as explained in 3). + +arch/i386/kernel/process.c has examples of both polling and +sleeping idle functions. + + +Possible arch/ problems +======================= + +Possible arch problems I found (and either tried to fix or didn't): + +h8300 - Is such sleeping racy vs interrupts? (See #4a). + The H8/300 manual I found indicates yes, however disabling IRQs + over the sleep mean only NMIs can wake it up, so can't fix easily + without doing spin waiting. + +ia64 - is safe_halt call racy vs interrupts? (does it sleep?) (See #4a) + +sh64 - Is sleeping racy vs interrupts? (See #4a) + +sparc - IRQs on at this point(?), change local_irq_save to _disable. + - TODO: needs secondary CPUs to disable preempt (See #1) + diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index fef92eb..e7da8c3 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -52,8 +52,6 @@ ppa.txt - info on driver for IOmega zip drive qlogicfas.txt - info on driver for QLogic FASxxx based adapters -qlogicisp.txt - - info on driver for QLogic ISP 1020 based adapters scsi-generic.txt - info on the sg driver for generic (non-disk/CD/tape) SCSI devices. scsi.txt diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx new file mode 100644 index 0000000..9e15b4f --- /dev/null +++ b/Documentation/scsi/LICENSE.qla2xxx @@ -0,0 +1,45 @@ +Copyright (c) 2003-2005 QLogic Corporation +QLogic Linux Fibre Channel HBA Driver + +This program includes a device driver for Linux 2.6 that may be +distributed with QLogic hardware specific firmware binary file. +You may modify and redistribute the device driver code under the +GNU General Public License as published by the Free Software +Foundation (version 2 or a later version). + +You may redistribute the hardware specific firmware binary file +under the following terms: + + 1. Redistribution of source code (only if applicable), + must retain the above copyright notice, this list of + conditions and the following disclaimer. + + 2. Redistribution in binary form must reproduce the above + copyright notice, this list of conditions and the + following disclaimer in the documentation and/or other + materials provided with the distribution. + + 3. The name of QLogic Corporation may not be used to + endorse or promote products derived from this software + without specific prior written permission + +REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, +THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT +CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR +OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, +TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN +ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN +COMBINATION WITH THIS PROGRAM. diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index 2ffb3ae..d16ce5b 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -1108,7 +1108,7 @@ A: You have to activate MCA bus support, first. Q: Where can I find the latest info about this driver? A: See the file MAINTAINERS for the current WWW-address, which offers - updates, info and Q/A lists. At this files' origin, the webaddress + updates, info and Q/A lists. At this file's origin, the webaddress was: http://www.uni-mainz.de/~langm000/linux.html Q: My SCSI-adapter is not recognized by the driver, what can I do? A: Just force it to be recognized by kernel parameters. See section 5.1. @@ -1248,7 +1248,7 @@ -------------------- The address of the IBM SCSI-subsystem supporting WWW-page is: - http://www.uni-mainz.de/~langm000/linux.html + http://www.staff.uni-mainz.de/mlang/linux.html Here you can find info about the background of this driver, patches, troubleshooting support, news and a bugreport form. Please check that diff --git a/Documentation/scsi/qlogicfas.txt b/Documentation/scsi/qlogicfas.txt index 398f991..c211d82 100644 --- a/Documentation/scsi/qlogicfas.txt +++ b/Documentation/scsi/qlogicfas.txt @@ -11,8 +11,7 @@ Qlogic boards: * IQ-PCI-10 * IQ-PCI-D -is provided by the qlogicisp.c driver. Check README.qlogicisp for -details. +is provided by the qla1280 driver. Nor does it support the PCI-Basic, which is supported by the 'am53c974' driver. diff --git a/Documentation/scsi/qlogicisp.txt b/Documentation/scsi/qlogicisp.txt deleted file mode 100644 index 6920f6c7..0000000 --- a/Documentation/scsi/qlogicisp.txt +++ /dev/null @@ -1,30 +0,0 @@ -Notes for the QLogic ISP1020 PCI SCSI Driver: - -This driver works well in practice, but does not support disconnect/ -reconnect, which makes using it with tape drives impractical. - -It should work for most host adaptors with the ISP1020 chip. The -QLogic Corporation produces several PCI SCSI adapters which should -work: - - * IQ-PCI - * IQ-PCI-10 - * IQ-PCI-D - -This driver may work with boards containing the ISP1020A or ISP1040A -chips, but that has not been tested. - -This driver will NOT work with: - - * ISA or VL Bus Qlogic cards (they use the 'qlogicfas' driver) - * PCI-basic (it uses the 'am53c974' driver) - -Much thanks to QLogic's tech support for providing the latest ISP1020 -firmware, and for taking the time to review my code. - -Erik Moe -ehm@cris.com - -Revised: -Michael A. Griffith -grif@cs.ucr.edu diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 534a509..331afd7 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -83,11 +83,11 @@ with the command. The timeout handler is scsi_times_out(). When a timeout occurs, this function - 1. invokes optional hostt->eh_timedout() callback. Return value can + 1. invokes optional hostt->eh_timed_out() callback. Return value can be one of - EH_HANDLED - This indicates that eh_timedout() dealt with the timeout. The + This indicates that eh_timed_out() dealt with the timeout. The scmd is passed to __scsi_done() and thus linked into per-cpu scsi_done_q. Normal command completion described in [1-2-1] follows. @@ -105,7 +105,7 @@ function command will time out again. - EH_NOT_HANDLED - This is the same as when eh_timedout() callback doesn't exist. + This is the same as when eh_timed_out() callback doesn't exist. Step #2 is taken. 2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the @@ -142,7 +142,7 @@ are linked on shost->eh_cmd_q. Note that this does not mean lower layers are quiescent. If a LLDD completed a scmd with error status, the LLDD and lower layers are assumed to forget about the scmd at that point. However, if a scmd -has timed out, unless hostt->eh_timedout() made lower layers forget +has timed out, unless hostt->eh_timed_out() made lower layers forget about the scmd, which currently no LLDD does, the command is still active as long as lower layers are concerned and completion could occur at any time. Of course, all such completions are ignored as the diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 44df89c..66565d4 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -346,7 +346,7 @@ Next, there is a movement to "outlaw" typedefs introducing synonyms for struct tags. Both can be still found in the SCSI subsystem, but the typedefs have been moved to a single file, scsi_typedefs.h to make their future removal easier, for example: -"typedef struct scsi_host_template Scsi_Host_Template;" +"typedef struct scsi_cmnd Scsi_Cmnd;" Also, most C99 enhancements are encouraged to the extent they are supported by the relevant gcc compilers. So C99 style structure and array @@ -718,7 +718,7 @@ void scsi_report_bus_reset(struct Scsi_Host * shost, int channel) * * Defined in: drivers/scsi/scsi.c . **/ -int scsi_track_queue_full(Scsi_Device *sdev, int depth) +int scsi_track_queue_full(struct scsi_device *sdev, int depth) /** diff --git a/Documentation/serial/driver b/Documentation/serial/driver index 87856d3..42ef997 100644 --- a/Documentation/serial/driver +++ b/Documentation/serial/driver @@ -116,12 +116,15 @@ hardware. line becoming inactive or the tty layer indicating we want to stop transmission due to an XOFF character. + The driver should stop transmitting characters as soon as + possible. + Locking: port->lock taken. Interrupts: locally disabled. This call must not sleep start_tx(port) - start transmitting characters. + Start transmitting characters. Locking: port->lock taken. Interrupts: locally disabled. @@ -281,26 +284,31 @@ hardware. Other functions --------------- -uart_update_timeout(port,cflag,quot) +uart_update_timeout(port,cflag,baud) Update the FIFO drain timeout, port->timeout, according to the - number of bits, parity, stop bits and quotient. + number of bits, parity, stop bits and baud rate. Locking: caller is expected to take port->lock Interrupts: n/a -uart_get_baud_rate(port,termios) +uart_get_baud_rate(port,termios,old,min,max) Return the numeric baud rate for the specified termios, taking account of the special 38400 baud "kludge". The B0 baud rate is mapped to 9600 baud. + If the baud rate is not within min..max, then if old is non-NULL, + the original baud rate will be tried. If that exceeds the + min..max constraint, 9600 baud will be returned. termios will + be updated to the baud rate in use. + + Note: min..max must always allow 9600 baud to be selected. + Locking: caller dependent. Interrupts: n/a -uart_get_divisor(port,termios,oldtermios) - Return the divsor (baud_base / baud) for the selected baud rate - specified by termios. If the baud rate is out of range, try - the original baud rate specified by oldtermios (if non-NULL). - If that fails, try 9600 baud. +uart_get_divisor(port,baud) + Return the divsor (baud_base / baud) for the specified baud + rate, appropriately rounded. If 38400 baud and custom divisor is selected, return the custom divisor instead. @@ -308,6 +316,46 @@ uart_get_divisor(port,termios,oldtermios) Locking: caller dependent. Interrupts: n/a +uart_match_port(port1,port2) + This utility function can be used to determine whether two + uart_port structures describe the same port. + + Locking: n/a + Interrupts: n/a + +uart_write_wakeup(port) + A driver is expected to call this function when the number of + characters in the transmit buffer have dropped below a threshold. + + Locking: port->lock should be held. + Interrupts: n/a + +uart_register_driver(drv) + Register a uart driver with the core driver. We in turn register + with the tty layer, and initialise the core driver per-port state. + + drv->port should be NULL, and the per-port structures should be + registered using uart_add_one_port after this call has succeeded. + + Locking: none + Interrupts: enabled + +uart_unregister_driver() + Remove all references to a driver from the core driver. The low + level driver must have removed all its ports via the + uart_remove_one_port() if it registered them with uart_add_one_port(). + + Locking: none + Interrupts: enabled + +uart_suspend_port() + +uart_resume_port() + +uart_add_one_port() + +uart_remove_one_port() + Other notes ----------- diff --git a/Documentation/sharedsubtree.txt b/Documentation/sharedsubtree.txt new file mode 100644 index 0000000..2d8f403 --- /dev/null +++ b/Documentation/sharedsubtree.txt @@ -0,0 +1,1060 @@ +Shared Subtrees +--------------- + +Contents: + 1) Overview + 2) Features + 3) smount command + 4) Use-case + 5) Detailed semantics + 6) Quiz + 7) FAQ + 8) Implementation + + +1) Overview +----------- + +Consider the following situation: + +A process wants to clone its own namespace, but still wants to access the CD +that got mounted recently. Shared subtree semantics provide the necessary +mechanism to accomplish the above. + +It provides the necessary building blocks for features like per-user-namespace +and versioned filesystem. + +2) Features +----------- + +Shared subtree provides four different flavors of mounts; struct vfsmount to be +precise + + a. shared mount + b. slave mount + c. private mount + d. unbindable mount + + +2a) A shared mount can be replicated to as many mountpoints and all the +replicas continue to be exactly same. + + Here is an example: + + Lets say /mnt has a mount that is shared. + mount --make-shared /mnt + + note: mount command does not yet support the --make-shared flag. + I have included a small C program which does the same by executing + 'smount /mnt shared' + + #mount --bind /mnt /tmp + The above command replicates the mount at /mnt to the mountpoint /tmp + and the contents of both the mounts remain identical. + + #ls /mnt + a b c + + #ls /tmp + a b c + + Now lets say we mount a device at /tmp/a + #mount /dev/sd0 /tmp/a + + #ls /tmp/a + t1 t2 t2 + + #ls /mnt/a + t1 t2 t2 + + Note that the mount has propagated to the mount at /mnt as well. + + And the same is true even when /dev/sd0 is mounted on /mnt/a. The + contents will be visible under /tmp/a too. + + +2b) A slave mount is like a shared mount except that mount and umount events + only propagate towards it. + + All slave mounts have a master mount which is a shared. + + Here is an example: + + Lets say /mnt has a mount which is shared. + #mount --make-shared /mnt + + Lets bind mount /mnt to /tmp + #mount --bind /mnt /tmp + + the new mount at /tmp becomes a shared mount and it is a replica of + the mount at /mnt. + + Now lets make the mount at /tmp; a slave of /mnt + #mount --make-slave /tmp + [or smount /tmp slave] + + lets mount /dev/sd0 on /mnt/a + #mount /dev/sd0 /mnt/a + + #ls /mnt/a + t1 t2 t3 + + #ls /tmp/a + t1 t2 t3 + + Note the mount event has propagated to the mount at /tmp + + However lets see what happens if we mount something on the mount at /tmp + + #mount /dev/sd1 /tmp/b + + #ls /tmp/b + s1 s2 s3 + + #ls /mnt/b + + Note how the mount event has not propagated to the mount at + /mnt + + +2c) A private mount does not forward or receive propagation. + + This is the mount we are familiar with. Its the default type. + + +2d) A unbindable mount is a unbindable private mount + + lets say we have a mount at /mnt and we make is unbindable + + #mount --make-unbindable /mnt + [ smount /mnt unbindable ] + + Lets try to bind mount this mount somewhere else. + # mount --bind /mnt /tmp + mount: wrong fs type, bad option, bad superblock on /mnt, + or too many mounted file systems + + Binding a unbindable mount is a invalid operation. + + +3) smount command + + Currently the mount command is not aware of shared subtree features. + Work is in progress to add the support in mount ( util-linux package ). + Till then use the following program. + + ------------------------------------------------------------------------ + // + //this code was developed my Miklos Szeredi <miklos@szeredi.hu> + //and modified by Ram Pai <linuxram@us.ibm.com> + // sample usage: + // smount /tmp shared + // + #include <stdio.h> + #include <stdlib.h> + #include <unistd.h> + #include <sys/mount.h> + #include <sys/fsuid.h> + + #ifndef MS_REC + #define MS_REC 0x4000 /* 16384: Recursive loopback */ + #endif + + #ifndef MS_SHARED + #define MS_SHARED 1<<20 /* Shared */ + #endif + + #ifndef MS_PRIVATE + #define MS_PRIVATE 1<<18 /* Private */ + #endif + + #ifndef MS_SLAVE + #define MS_SLAVE 1<<19 /* Slave */ + #endif + + #ifndef MS_UNBINDABLE + #define MS_UNBINDABLE 1<<17 /* Unbindable */ + #endif + + int main(int argc, char *argv[]) + { + int type; + if(argc != 3) { + fprintf(stderr, "usage: %s dir " + "<rshared|rslave|rprivate|runbindable|shared|slave" + "|private|unbindable>\n" , argv[0]); + return 1; + } + + fprintf(stdout, "%s %s %s\n", argv[0], argv[1], argv[2]); + + if (strcmp(argv[2],"rshared")==0) + type=(MS_SHARED|MS_REC); + else if (strcmp(argv[2],"rslave")==0) + type=(MS_SLAVE|MS_REC); + else if (strcmp(argv[2],"rprivate")==0) + type=(MS_PRIVATE|MS_REC); + else if (strcmp(argv[2],"runbindable")==0) + type=(MS_UNBINDABLE|MS_REC); + else if (strcmp(argv[2],"shared")==0) + type=MS_SHARED; + else if (strcmp(argv[2],"slave")==0) + type=MS_SLAVE; + else if (strcmp(argv[2],"private")==0) + type=MS_PRIVATE; + else if (strcmp(argv[2],"unbindable")==0) + type=MS_UNBINDABLE; + else { + fprintf(stderr, "invalid operation: %s\n", argv[2]); + return 1; + } + setfsuid(getuid()); + + if(mount("", argv[1], "dontcare", type, "") == -1) { + perror("mount"); + return 1; + } + return 0; + } + ----------------------------------------------------------------------- + + Copy the above code snippet into smount.c + gcc -o smount smount.c + + + (i) To mark all the mounts under /mnt as shared execute the following + command: + + smount /mnt rshared + the corresponding syntax planned for mount command is + mount --make-rshared /mnt + + just to mark a mount /mnt as shared, execute the following + command: + smount /mnt shared + the corresponding syntax planned for mount command is + mount --make-shared /mnt + + (ii) To mark all the shared mounts under /mnt as slave execute the + following + + command: + smount /mnt rslave + the corresponding syntax planned for mount command is + mount --make-rslave /mnt + + just to mark a mount /mnt as slave, execute the following + command: + smount /mnt slave + the corresponding syntax planned for mount command is + mount --make-slave /mnt + + (iii) To mark all the mounts under /mnt as private execute the + following command: + + smount /mnt rprivate + the corresponding syntax planned for mount command is + mount --make-rprivate /mnt + + just to mark a mount /mnt as private, execute the following + command: + smount /mnt private + the corresponding syntax planned for mount command is + mount --make-private /mnt + + NOTE: by default all the mounts are created as private. But if + you want to change some shared/slave/unbindable mount as + private at a later point in time, this command can help. + + (iv) To mark all the mounts under /mnt as unbindable execute the + following + + command: + smount /mnt runbindable + the corresponding syntax planned for mount command is + mount --make-runbindable /mnt + + just to mark a mount /mnt as unbindable, execute the following + command: + smount /mnt unbindable + the corresponding syntax planned for mount command is + mount --make-unbindable /mnt + + +4) Use cases +------------ + + A) A process wants to clone its own namespace, but still wants to + access the CD that got mounted recently. + + Solution: + + The system administrator can make the mount at /cdrom shared + mount --bind /cdrom /cdrom + mount --make-shared /cdrom + + Now any process that clones off a new namespace will have a + mount at /cdrom which is a replica of the same mount in the + parent namespace. + + So when a CD is inserted and mounted at /cdrom that mount gets + propagated to the other mount at /cdrom in all the other clone + namespaces. + + B) A process wants its mounts invisible to any other process, but + still be able to see the other system mounts. + + Solution: + + To begin with, the administrator can mark the entire mount tree + as shareable. + + mount --make-rshared / + + A new process can clone off a new namespace. And mark some part + of its namespace as slave + + mount --make-rslave /myprivatetree + + Hence forth any mounts within the /myprivatetree done by the + process will not show up in any other namespace. However mounts + done in the parent namespace under /myprivatetree still shows + up in the process's namespace. + + + Apart from the above semantics this feature provides the + building blocks to solve the following problems: + + C) Per-user namespace + + The above semantics allows a way to share mounts across + namespaces. But namespaces are associated with processes. If + namespaces are made first class objects with user API to + associate/disassociate a namespace with userid, then each user + could have his/her own namespace and tailor it to his/her + requirements. Offcourse its needs support from PAM. + + D) Versioned files + + If the entire mount tree is visible at multiple locations, then + a underlying versioning file system can return different + version of the file depending on the path used to access that + file. + + An example is: + + mount --make-shared / + mount --rbind / /view/v1 + mount --rbind / /view/v2 + mount --rbind / /view/v3 + mount --rbind / /view/v4 + + and if /usr has a versioning filesystem mounted, than that + mount appears at /view/v1/usr, /view/v2/usr, /view/v3/usr and + /view/v4/usr too + + A user can request v3 version of the file /usr/fs/namespace.c + by accessing /view/v3/usr/fs/namespace.c . The underlying + versioning filesystem can then decipher that v3 version of the + filesystem is being requested and return the corresponding + inode. + +5) Detailed semantics: +------------------- + The section below explains the detailed semantics of + bind, rbind, move, mount, umount and clone-namespace operations. + + Note: the word 'vfsmount' and the noun 'mount' have been used + to mean the same thing, throughout this document. + +5a) Mount states + + A given mount can be in one of the following states + 1) shared + 2) slave + 3) shared and slave + 4) private + 5) unbindable + + A 'propagation event' is defined as event generated on a vfsmount + that leads to mount or unmount actions in other vfsmounts. + + A 'peer group' is defined as a group of vfsmounts that propagate + events to each other. + + (1) Shared mounts + + A 'shared mount' is defined as a vfsmount that belongs to a + 'peer group'. + + For example: + mount --make-shared /mnt + mount --bin /mnt /tmp + + The mount at /mnt and that at /tmp are both shared and belong + to the same peer group. Anything mounted or unmounted under + /mnt or /tmp reflect in all the other mounts of its peer + group. + + + (2) Slave mounts + + A 'slave mount' is defined as a vfsmount that receives + propagation events and does not forward propagation events. + + A slave mount as the name implies has a master mount from which + mount/unmount events are received. Events do not propagate from + the slave mount to the master. Only a shared mount can be made + a slave by executing the following command + + mount --make-slave mount + + A shared mount that is made as a slave is no more shared unless + modified to become shared. + + (3) Shared and Slave + + A vfsmount can be both shared as well as slave. This state + indicates that the mount is a slave of some vfsmount, and + has its own peer group too. This vfsmount receives propagation + events from its master vfsmount, and also forwards propagation + events to its 'peer group' and to its slave vfsmounts. + + Strictly speaking, the vfsmount is shared having its own + peer group, and this peer-group is a slave of some other + peer group. + + Only a slave vfsmount can be made as 'shared and slave' by + either executing the following command + mount --make-shared mount + or by moving the slave vfsmount under a shared vfsmount. + + (4) Private mount + + A 'private mount' is defined as vfsmount that does not + receive or forward any propagation events. + + (5) Unbindable mount + + A 'unbindable mount' is defined as vfsmount that does not + receive or forward any propagation events and cannot + be bind mounted. + + + State diagram: + The state diagram below explains the state transition of a mount, + in response to various commands. + ------------------------------------------------------------------------ + | |make-shared | make-slave | make-private |make-unbindab| + --------------|------------|--------------|--------------|-------------| + |shared |shared |*slave/private| private | unbindable | + | | | | | | + |-------------|------------|--------------|--------------|-------------| + |slave |shared | **slave | private | unbindable | + | |and slave | | | | + |-------------|------------|--------------|--------------|-------------| + |shared |shared | slave | private | unbindable | + |and slave |and slave | | | | + |-------------|------------|--------------|--------------|-------------| + |private |shared | **private | private | unbindable | + |-------------|------------|--------------|--------------|-------------| + |unbindable |shared |**unbindable | private | unbindable | + ------------------------------------------------------------------------ + + * if the shared mount is the only mount in its peer group, making it + slave, makes it private automatically. Note that there is no master to + which it can be slaved to. + + ** slaving a non-shared mount has no effect on the mount. + + Apart from the commands listed below, the 'move' operation also changes + the state of a mount depending on type of the destination mount. Its + explained in section 5d. + +5b) Bind semantics + + Consider the following command + + mount --bind A/a B/b + + where 'A' is the source mount, 'a' is the dentry in the mount 'A', 'B' + is the destination mount and 'b' is the dentry in the destination mount. + + The outcome depends on the type of mount of 'A' and 'B'. The table + below contains quick reference. + --------------------------------------------------------------------------- + | BIND MOUNT OPERATION | + |************************************************************************** + |source(A)->| shared | private | slave | unbindable | + | dest(B) | | | | | + | | | | | | | + | v | | | | | + |************************************************************************** + | shared | shared | shared | shared & slave | invalid | + | | | | | | + |non-shared| shared | private | slave | invalid | + *************************************************************************** + + Details: + + 1. 'A' is a shared mount and 'B' is a shared mount. A new mount 'C' + which is clone of 'A', is created. Its root dentry is 'a' . 'C' is + mounted on mount 'B' at dentry 'b'. Also new mount 'C1', 'C2', 'C3' ... + are created and mounted at the dentry 'b' on all mounts where 'B' + propagates to. A new propagation tree containing 'C1',..,'Cn' is + created. This propagation tree is identical to the propagation tree of + 'B'. And finally the peer-group of 'C' is merged with the peer group + of 'A'. + + 2. 'A' is a private mount and 'B' is a shared mount. A new mount 'C' + which is clone of 'A', is created. Its root dentry is 'a'. 'C' is + mounted on mount 'B' at dentry 'b'. Also new mount 'C1', 'C2', 'C3' ... + are created and mounted at the dentry 'b' on all mounts where 'B' + propagates to. A new propagation tree is set containing all new mounts + 'C', 'C1', .., 'Cn' with exactly the same configuration as the + propagation tree for 'B'. + + 3. 'A' is a slave mount of mount 'Z' and 'B' is a shared mount. A new + mount 'C' which is clone of 'A', is created. Its root dentry is 'a' . + 'C' is mounted on mount 'B' at dentry 'b'. Also new mounts 'C1', 'C2', + 'C3' ... are created and mounted at the dentry 'b' on all mounts where + 'B' propagates to. A new propagation tree containing the new mounts + 'C','C1',.. 'Cn' is created. This propagation tree is identical to the + propagation tree for 'B'. And finally the mount 'C' and its peer group + is made the slave of mount 'Z'. In other words, mount 'C' is in the + state 'slave and shared'. + + 4. 'A' is a unbindable mount and 'B' is a shared mount. This is a + invalid operation. + + 5. 'A' is a private mount and 'B' is a non-shared(private or slave or + unbindable) mount. A new mount 'C' which is clone of 'A', is created. + Its root dentry is 'a'. 'C' is mounted on mount 'B' at dentry 'b'. + + 6. 'A' is a shared mount and 'B' is a non-shared mount. A new mount 'C' + which is a clone of 'A' is created. Its root dentry is 'a'. 'C' is + mounted on mount 'B' at dentry 'b'. 'C' is made a member of the + peer-group of 'A'. + + 7. 'A' is a slave mount of mount 'Z' and 'B' is a non-shared mount. A + new mount 'C' which is a clone of 'A' is created. Its root dentry is + 'a'. 'C' is mounted on mount 'B' at dentry 'b'. Also 'C' is set as a + slave mount of 'Z'. In other words 'A' and 'C' are both slave mounts of + 'Z'. All mount/unmount events on 'Z' propagates to 'A' and 'C'. But + mount/unmount on 'A' do not propagate anywhere else. Similarly + mount/unmount on 'C' do not propagate anywhere else. + + 8. 'A' is a unbindable mount and 'B' is a non-shared mount. This is a + invalid operation. A unbindable mount cannot be bind mounted. + +5c) Rbind semantics + + rbind is same as bind. Bind replicates the specified mount. Rbind + replicates all the mounts in the tree belonging to the specified mount. + Rbind mount is bind mount applied to all the mounts in the tree. + + If the source tree that is rbind has some unbindable mounts, + then the subtree under the unbindable mount is pruned in the new + location. + + eg: lets say we have the following mount tree. + + A + / \ + B C + / \ / \ + D E F G + + Lets say all the mount except the mount C in the tree are + of a type other than unbindable. + + If this tree is rbound to say Z + + We will have the following tree at the new location. + + Z + | + A' + / + B' Note how the tree under C is pruned + / \ in the new location. + D' E' + + + +5d) Move semantics + + Consider the following command + + mount --move A B/b + + where 'A' is the source mount, 'B' is the destination mount and 'b' is + the dentry in the destination mount. + + The outcome depends on the type of the mount of 'A' and 'B'. The table + below is a quick reference. + --------------------------------------------------------------------------- + | MOVE MOUNT OPERATION | + |************************************************************************** + | source(A)->| shared | private | slave | unbindable | + | dest(B) | | | | | + | | | | | | | + | v | | | | | + |************************************************************************** + | shared | shared | shared |shared and slave| invalid | + | | | | | | + |non-shared| shared | private | slave | unbindable | + *************************************************************************** + NOTE: moving a mount residing under a shared mount is invalid. + + Details follow: + + 1. 'A' is a shared mount and 'B' is a shared mount. The mount 'A' is + mounted on mount 'B' at dentry 'b'. Also new mounts 'A1', 'A2'...'An' + are created and mounted at dentry 'b' on all mounts that receive + propagation from mount 'B'. A new propagation tree is created in the + exact same configuration as that of 'B'. This new propagation tree + contains all the new mounts 'A1', 'A2'... 'An'. And this new + propagation tree is appended to the already existing propagation tree + of 'A'. + + 2. 'A' is a private mount and 'B' is a shared mount. The mount 'A' is + mounted on mount 'B' at dentry 'b'. Also new mount 'A1', 'A2'... 'An' + are created and mounted at dentry 'b' on all mounts that receive + propagation from mount 'B'. The mount 'A' becomes a shared mount and a + propagation tree is created which is identical to that of + 'B'. This new propagation tree contains all the new mounts 'A1', + 'A2'... 'An'. + + 3. 'A' is a slave mount of mount 'Z' and 'B' is a shared mount. The + mount 'A' is mounted on mount 'B' at dentry 'b'. Also new mounts 'A1', + 'A2'... 'An' are created and mounted at dentry 'b' on all mounts that + receive propagation from mount 'B'. A new propagation tree is created + in the exact same configuration as that of 'B'. This new propagation + tree contains all the new mounts 'A1', 'A2'... 'An'. And this new + propagation tree is appended to the already existing propagation tree of + 'A'. Mount 'A' continues to be the slave mount of 'Z' but it also + becomes 'shared'. + + 4. 'A' is a unbindable mount and 'B' is a shared mount. The operation + is invalid. Because mounting anything on the shared mount 'B' can + create new mounts that get mounted on the mounts that receive + propagation from 'B'. And since the mount 'A' is unbindable, cloning + it to mount at other mountpoints is not possible. + + 5. 'A' is a private mount and 'B' is a non-shared(private or slave or + unbindable) mount. The mount 'A' is mounted on mount 'B' at dentry 'b'. + + 6. 'A' is a shared mount and 'B' is a non-shared mount. The mount 'A' + is mounted on mount 'B' at dentry 'b'. Mount 'A' continues to be a + shared mount. + + 7. 'A' is a slave mount of mount 'Z' and 'B' is a non-shared mount. + The mount 'A' is mounted on mount 'B' at dentry 'b'. Mount 'A' + continues to be a slave mount of mount 'Z'. + + 8. 'A' is a unbindable mount and 'B' is a non-shared mount. The mount + 'A' is mounted on mount 'B' at dentry 'b'. Mount 'A' continues to be a + unbindable mount. + +5e) Mount semantics + + Consider the following command + + mount device B/b + + 'B' is the destination mount and 'b' is the dentry in the destination + mount. + + The above operation is the same as bind operation with the exception + that the source mount is always a private mount. + + +5f) Unmount semantics + + Consider the following command + + umount A + + where 'A' is a mount mounted on mount 'B' at dentry 'b'. + + If mount 'B' is shared, then all most-recently-mounted mounts at dentry + 'b' on mounts that receive propagation from mount 'B' and does not have + sub-mounts within them are unmounted. + + Example: Lets say 'B1', 'B2', 'B3' are shared mounts that propagate to + each other. + + lets say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount + 'B1', 'B2' and 'B3' respectively. + + lets say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on + mount 'B1', 'B2' and 'B3' respectively. + + if 'C1' is unmounted, all the mounts that are most-recently-mounted on + 'B1' and on the mounts that 'B1' propagates-to are unmounted. + + 'B1' propagates to 'B2' and 'B3'. And the most recently mounted mount + on 'B2' at dentry 'b' is 'C2', and that of mount 'B3' is 'C3'. + + So all 'C1', 'C2' and 'C3' should be unmounted. + + If any of 'C2' or 'C3' has some child mounts, then that mount is not + unmounted, but all other mounts are unmounted. However if 'C1' is told + to be unmounted and 'C1' has some sub-mounts, the umount operation is + failed entirely. + +5g) Clone Namespace + + A cloned namespace contains all the mounts as that of the parent + namespace. + + Lets say 'A' and 'B' are the corresponding mounts in the parent and the + child namespace. + + If 'A' is shared, then 'B' is also shared and 'A' and 'B' propagate to + each other. + + If 'A' is a slave mount of 'Z', then 'B' is also the slave mount of + 'Z'. + + If 'A' is a private mount, then 'B' is a private mount too. + + If 'A' is unbindable mount, then 'B' is a unbindable mount too. + + +6) Quiz + + A. What is the result of the following command sequence? + + mount --bind /mnt /mnt + mount --make-shared /mnt + mount --bind /mnt /tmp + mount --move /tmp /mnt/1 + + what should be the contents of /mnt /mnt/1 /mnt/1/1 should be? + Should they all be identical? or should /mnt and /mnt/1 be + identical only? + + + B. What is the result of the following command sequence? + + mount --make-rshared / + mkdir -p /v/1 + mount --rbind / /v/1 + + what should be the content of /v/1/v/1 be? + + + C. What is the result of the following command sequence? + + mount --bind /mnt /mnt + mount --make-shared /mnt + mkdir -p /mnt/1/2/3 /mnt/1/test + mount --bind /mnt/1 /tmp + mount --make-slave /mnt + mount --make-shared /mnt + mount --bind /mnt/1/2 /tmp1 + mount --make-slave /mnt + + At this point we have the first mount at /tmp and + its root dentry is 1. Lets call this mount 'A' + And then we have a second mount at /tmp1 with root + dentry 2. Lets call this mount 'B' + Next we have a third mount at /mnt with root dentry + mnt. Lets call this mount 'C' + + 'B' is the slave of 'A' and 'C' is a slave of 'B' + A -> B -> C + + at this point if we execute the following command + + mount --bind /bin /tmp/test + + The mount is attempted on 'A' + + will the mount propagate to 'B' and 'C' ? + + what would be the contents of + /mnt/1/test be? + +7) FAQ + + Q1. Why is bind mount needed? How is it different from symbolic links? + symbolic links can get stale if the destination mount gets + unmounted or moved. Bind mounts continue to exist even if the + other mount is unmounted or moved. + + Q2. Why can't the shared subtree be implemented using exportfs? + + exportfs is a heavyweight way of accomplishing part of what + shared subtree can do. I cannot imagine a way to implement the + semantics of slave mount using exportfs? + + Q3 Why is unbindable mount needed? + + Lets say we want to replicate the mount tree at multiple + locations within the same subtree. + + if one rbind mounts a tree within the same subtree 'n' times + the number of mounts created is an exponential function of 'n'. + Having unbindable mount can help prune the unneeded bind + mounts. Here is a example. + + step 1: + lets say the root tree has just two directories with + one vfsmount. + root + / \ + tmp usr + + And we want to replicate the tree at multiple + mountpoints under /root/tmp + + step2: + mount --make-shared /root + + mkdir -p /tmp/m1 + + mount --rbind /root /tmp/m1 + + the new tree now looks like this: + + root + / \ + tmp usr + / + m1 + / \ + tmp usr + / + m1 + + it has two vfsmounts + + step3: + mkdir -p /tmp/m2 + mount --rbind /root /tmp/m2 + + the new tree now looks like this: + + root + / \ + tmp usr + / \ + m1 m2 + / \ / \ + tmp usr tmp usr + / \ / + m1 m2 m1 + / \ / \ + tmp usr tmp usr + / / \ + m1 m1 m2 + / \ + tmp usr + / \ + m1 m2 + + it has 6 vfsmounts + + step 4: + mkdir -p /tmp/m3 + mount --rbind /root /tmp/m3 + + I wont' draw the tree..but it has 24 vfsmounts + + + at step i the number of vfsmounts is V[i] = i*V[i-1]. + This is an exponential function. And this tree has way more + mounts than what we really needed in the first place. + + One could use a series of umount at each step to prune + out the unneeded mounts. But there is a better solution. + Unclonable mounts come in handy here. + + step 1: + lets say the root tree has just two directories with + one vfsmount. + root + / \ + tmp usr + + How do we set up the same tree at multiple locations under + /root/tmp + + step2: + mount --bind /root/tmp /root/tmp + + mount --make-rshared /root + mount --make-unbindable /root/tmp + + mkdir -p /tmp/m1 + + mount --rbind /root /tmp/m1 + + the new tree now looks like this: + + root + / \ + tmp usr + / + m1 + / \ + tmp usr + + step3: + mkdir -p /tmp/m2 + mount --rbind /root /tmp/m2 + + the new tree now looks like this: + + root + / \ + tmp usr + / \ + m1 m2 + / \ / \ + tmp usr tmp usr + + step4: + + mkdir -p /tmp/m3 + mount --rbind /root /tmp/m3 + + the new tree now looks like this: + + root + / \ + tmp usr + / \ \ + m1 m2 m3 + / \ / \ / \ + tmp usr tmp usr tmp usr + +8) Implementation + +8A) Datastructure + + 4 new fields are introduced to struct vfsmount + ->mnt_share + ->mnt_slave_list + ->mnt_slave + ->mnt_master + + ->mnt_share links togather all the mount to/from which this vfsmount + send/receives propagation events. + + ->mnt_slave_list links all the mounts to which this vfsmount propagates + to. + + ->mnt_slave links togather all the slaves that its master vfsmount + propagates to. + + ->mnt_master points to the master vfsmount from which this vfsmount + receives propagation. + + ->mnt_flags takes two more flags to indicate the propagation status of + the vfsmount. MNT_SHARE indicates that the vfsmount is a shared + vfsmount. MNT_UNCLONABLE indicates that the vfsmount cannot be + replicated. + + All the shared vfsmounts in a peer group form a cyclic list through + ->mnt_share. + + All vfsmounts with the same ->mnt_master form on a cyclic list anchored + in ->mnt_master->mnt_slave_list and going through ->mnt_slave. + + ->mnt_master can point to arbitrary (and possibly different) members + of master peer group. To find all immediate slaves of a peer group + you need to go through _all_ ->mnt_slave_list of its members. + Conceptually it's just a single set - distribution among the + individual lists does not affect propagation or the way propagation + tree is modified by operations. + + A example propagation tree looks as shown in the figure below. + [ NOTE: Though it looks like a forest, if we consider all the shared + mounts as a conceptual entity called 'pnode', it becomes a tree] + + + A <--> B <--> C <---> D + /|\ /| |\ + / F G J K H I + / + E<-->K + /|\ + M L N + + In the above figure A,B,C and D all are shared and propagate to each + other. 'A' has got 3 slave mounts 'E' 'F' and 'G' 'C' has got 2 slave + mounts 'J' and 'K' and 'D' has got two slave mounts 'H' and 'I'. + 'E' is also shared with 'K' and they propagate to each other. And + 'K' has 3 slaves 'M', 'L' and 'N' + + A's ->mnt_share links with the ->mnt_share of 'B' 'C' and 'D' + + A's ->mnt_slave_list links with ->mnt_slave of 'E', 'K', 'F' and 'G' + + E's ->mnt_share links with ->mnt_share of K + 'E', 'K', 'F', 'G' have their ->mnt_master point to struct + vfsmount of 'A' + 'M', 'L', 'N' have their ->mnt_master point to struct vfsmount of 'K' + K's ->mnt_slave_list links with ->mnt_slave of 'M', 'L' and 'N' + + C's ->mnt_slave_list links with ->mnt_slave of 'J' and 'K' + J and K's ->mnt_master points to struct vfsmount of C + and finally D's ->mnt_slave_list links with ->mnt_slave of 'H' and 'I' + 'H' and 'I' have their ->mnt_master pointing to struct vfsmount of 'D'. + + + NOTE: The propagation tree is orthogonal to the mount tree. + + +8B Algorithm: + + The crux of the implementation resides in rbind/move operation. + + The overall algorithm breaks the operation into 3 phases: (look at + attach_recursive_mnt() and propagate_mnt()) + + 1. prepare phase. + 2. commit phases. + 3. abort phases. + + Prepare phase: + + for each mount in the source tree: + a) Create the necessary number of mount trees to + be attached to each of the mounts that receive + propagation from the destination mount. + b) Do not attach any of the trees to its destination. + However note down its ->mnt_parent and ->mnt_mountpoint + c) Link all the new mounts to form a propagation tree that + is identical to the propagation tree of the destination + mount. + + If this phase is successful, there should be 'n' new + propagation trees; where 'n' is the number of mounts in the + source tree. Go to the commit phase + + Also there should be 'm' new mount trees, where 'm' is + the number of mounts to which the destination mount + propagates to. + + if any memory allocations fail, go to the abort phase. + + Commit phase + attach each of the mount trees to their corresponding + destination mounts. + + Abort phase + delete all the newly created trees. + + NOTE: all the propagation related functionality resides in the file + pnode.c + + +------------------------------------------------------------------------ + +version 0.1 (created the initial document, Ram Pai linuxram@us.ibm.com) +version 0.2 (Incorporated comments from Al Viro) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 13cba95..2f27f39 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -167,7 +167,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. spdif - Support SPDIF I/O - Default: disabled - Module supports autoprobe and multiple chips (max 8). + This module supports one chip and autoprobe. The power-management is supported. @@ -206,7 +206,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. See "AC97 Quirk Option" section below. spdif_aclink - S/PDIF transfer over AC-link (default = 1) - This module supports up to 8 cards and autoprobe. + This module supports one card and autoprobe. ATI IXP has two different methods to control SPDIF output. One is over AC-link and another is over the "direct" SPDIF output. The @@ -218,7 +218,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for ATI IXP 150/200/250 AC97 modem controllers. - Module supports up to 8 cards. + This module supports one card and autoprobe. Note: The default index value of this module is -2, i.e. the first slot is excluded. @@ -637,7 +637,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. model - force the model name position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) - Module supports up to 8 cards. + This module supports one card and autoprobe. Each codec may have a model table for different configurations. If your machine isn't listed there, the default (usually minimal) @@ -663,6 +663,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y + ALC260 + hp HP machines + fujitsu Fujitsu S7020 + CMI9880 minimal 3-jack in back min_fp 3-jack in back, 2-jack in front @@ -811,7 +815,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. semaphores (e.g. on some ASUS laptops) (default off) - Module supports autoprobe and multiple bus-master chips (max 8). + This module supports one chip and autoprobe. Note: the latest driver supports auto-detection of chip clock. if you still encounter too fast playback, specify the clock @@ -830,7 +834,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ac97_clock - AC'97 codec clock base (0 = auto-detect) - This module supports up to 8 cards and autoprobe. + This module supports one card and autoprobe. Note: The default index value of this module is -2, i.e. the first slot is excluded. @@ -950,8 +954,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. use_cache - 0 or 1 (disabled by default) vaio_hack - alias buffer_top=0x25a800 reset_workaround - enable AC97 RESET workaround for some laptops + reset_workaround2 - enable extended AC97 RESET workaround for some + other laptops - Module supports autoprobe and multiple chips (max 8). + This module supports one chip and autoprobe. The power-management is supported. @@ -980,6 +986,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. workaround is enabled automatically. For other laptops with a hard freeze, you can try reset_workaround=1 option. + Note: Dell Latitude CSx laptops have another problem regarding + AC97 RESET. On these laptops, reset_workaround2 option is + turned on as default. This option is worth to try if the + previous reset_workaround option doesn't help. + Note: This driver is really crappy. It's a porting from the OSS driver, which is a result of black-magic reverse engineering. The detection of codec will fail if the driver is loaded *after* @@ -1310,7 +1321,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ac97_quirk - AC'97 workaround for strange hardware See "AC97 Quirk Option" section below. - Module supports autoprobe and multiple bus-master chips (max 8). + This module supports one chip and autoprobe. Note: on some SMP motherboards like MSI 694D the interrupts might not be generated properly. In such a case, please try to @@ -1352,7 +1363,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ac97_clock - AC'97 codec clock base (default 48000Hz) - Module supports up to 8 cards. + This module supports one card and autoprobe. Note: The default index value of this module is -2, i.e. the first slot is excluded. diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 24e8552..260334c 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -18,8 +18,8 @@ </affiliation> </author> - <date>March 6, 2005</date> - <edition>0.3.4</edition> + <date>October 6, 2005</date> + <edition>0.3.5</edition> <abstract> <para> @@ -30,7 +30,7 @@ <legalnotice> <para> - Copyright (c) 2002-2004 Takashi Iwai <email>tiwai@suse.de</email> + Copyright (c) 2002-2005 Takashi Iwai <email>tiwai@suse.de</email> </para> <para> @@ -1433,25 +1433,10 @@ <informalexample> <programlisting> <![CDATA[ - if (chip->res_port) { - release_resource(chip->res_port); - kfree_nocheck(chip->res_port); - } + release_and_free_resource(chip->res_port); ]]> </programlisting> </informalexample> - - As you can see, the resource pointer is also to be freed - via <function>kfree_nocheck()</function> after - <function>release_resource()</function> is called. You - cannot use <function>kfree()</function> here, because on ALSA, - <function>kfree()</function> may be a wrapper to its own - allocator with the memory debugging. Since the resource pointer - is allocated externally outside the ALSA, it must be released - via the native - <function>kfree()</function>. - <function>kfree_nocheck()</function> is used for that; it calls - the native <function>kfree()</function> without wrapper. </para> <para> @@ -2190,8 +2175,7 @@ struct _snd_pcm_runtime { unsigned int rate_den; /* -- SW params -- */ - int tstamp_timespec; /* use timeval (0) or timespec (1) */ - snd_pcm_tstamp_t tstamp_mode; /* mmap timestamp is updated */ + struct timespec tstamp_mode; /* mmap timestamp is updated */ unsigned int period_step; unsigned int sleep_min; /* min ticks to sleep */ snd_pcm_uframes_t xfer_align; /* xfer size need to be a multiple */ @@ -3709,8 +3693,7 @@ struct _snd_pcm_runtime { <para> Here, the chip instance is retrieved via <function>snd_kcontrol_chip()</function> macro. This macro - converts from kcontrol->private_data to the type defined by - <type>chip_t</type>. The + just accesses to kcontrol->private_data. The kcontrol->private_data field is given as the argument of <function>snd_ctl_new()</function> (see the later subsection @@ -5998,32 +5981,23 @@ struct _snd_pcm_runtime { The first argument is the expression to evaluate, and the second argument is the action if it fails. When <constant>CONFIG_SND_DEBUG</constant>, is set, it will show an - error message such as <computeroutput>BUG? (xxx) (called from - yyy)</computeroutput>. When no debug flag is set, this is - ignored. + error message such as <computeroutput>BUG? (xxx)</computeroutput> + together with stack trace. </para> - </section> - - <section id="useful-functions-snd-runtime-check"> - <title><function>snd_runtime_check()</function></title> <para> - This macro is quite similar with - <function>snd_assert()</function>. Unlike - <function>snd_assert()</function>, the expression is always - evaluated regardless of - <constant>CONFIG_SND_DEBUG</constant>. When - <constant>CONFIG_SND_DEBUG</constant> is set, the macro will - show a message like <computeroutput>ERROR (xx) (called from - yyy)</computeroutput>. + When no debug flag is set, this macro is ignored. </para> </section> <section id="useful-functions-snd-bug"> <title><function>snd_BUG()</function></title> <para> - It calls <function>snd_assert(0,)</function> -- that is, just - prints the error message at the point. It's useful to show that - a fatal error happens there. + It shows <computeroutput>BUG?</computeroutput> message and + stack trace as well as <function>snd_assert</function> at the point. + It's useful to show that a fatal error happens there. + </para> + <para> + When no debug flag is set, this macro is ignored. </para> </section> </chapter> diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 5df44dc..3f1c546 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -41,9 +41,9 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian vs cpu-endian vs whatever), and there the constant "0" really _is_ special. -Modify top-level Makefile to say +Use -CHECK = sparse -Wbitwise + make C=[12] CF=-Wbitwise or you don't get any checking at all. @@ -51,9 +51,9 @@ or you don't get any checking at all. Where to get sparse ~~~~~~~~~~~~~~~~~~~ -With BK, you can just get it from +With git, you can just get it from - bk://sparse.bkbits.net/sparse + rsync://rsync.kernel.org/pub/scm/devel/sparse/sparse.git and DaveJ has tar-balls at diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt index d59b95c..a49e5f2 100644 --- a/Documentation/usb/URB.txt +++ b/Documentation/usb/URB.txt @@ -1,5 +1,6 @@ Revised: 2000-Dec-05. Again: 2002-Jul-06 +Again: 2005-Sep-19 NOTE: @@ -18,8 +19,8 @@ called USB Request Block, or URB for short. and deliver the data and status back. - Execution of an URB is inherently an asynchronous operation, i.e. the - usb_submit_urb(urb) call returns immediately after it has successfully queued - the requested action. + usb_submit_urb(urb) call returns immediately after it has successfully + queued the requested action. - Transfers for one URB can be canceled with usb_unlink_urb(urb) at any time. @@ -94,8 +95,9 @@ To free an URB, use void usb_free_urb(struct urb *urb) -You may not free an urb that you've submitted, but which hasn't yet been -returned to you in a completion callback. +You may free an urb that you've submitted, but which hasn't yet been +returned to you in a completion callback. It will automatically be +deallocated when it is no longer in use. 1.4. What has to be filled in? @@ -145,30 +147,36 @@ to get seamless ISO streaming. 1.6. How to cancel an already running URB? -For an URB which you've submitted, but which hasn't been returned to -your driver by the host controller, call +There are two ways to cancel an URB you've submitted but which hasn't +been returned to your driver yet. For an asynchronous cancel, call int usb_unlink_urb(struct urb *urb) It removes the urb from the internal list and frees all allocated -HW descriptors. The status is changed to reflect unlinking. After -usb_unlink_urb() returns with that status code, you can free the URB -with usb_free_urb(). +HW descriptors. The status is changed to reflect unlinking. Note +that the URB will not normally have finished when usb_unlink_urb() +returns; you must still wait for the completion handler to be called. -There is also an asynchronous unlink mode. To use this, set the -the URB_ASYNC_UNLINK flag in urb->transfer flags before calling -usb_unlink_urb(). When using async unlinking, the URB will not -normally be unlinked when usb_unlink_urb() returns. Instead, wait -for the completion handler to be called. +To cancel an URB synchronously, call + + void usb_kill_urb(struct urb *urb) + +It does everything usb_unlink_urb does, and in addition it waits +until after the URB has been returned and the completion handler +has finished. It also marks the URB as temporarily unusable, so +that if the completion handler or anyone else tries to resubmit it +they will get a -EPERM error. Thus you can be sure that when +usb_kill_urb() returns, the URB is totally idle. 1.7. What about the completion handler? The handler is of the following type: - typedef void (*usb_complete_t)(struct urb *); + typedef void (*usb_complete_t)(struct urb *, struct pt_regs *) -i.e. it gets just the URB that caused the completion call. +I.e., it gets the URB that caused the completion call, plus the +register values at the time of the corresponding interrupt (if any). In the completion handler, you should have a look at urb->status to detect any USB errors. Since the context parameter is included in the URB, you can pass information to the completion handler. @@ -176,17 +184,11 @@ you can pass information to the completion handler. Note that even when an error (or unlink) is reported, data may have been transferred. That's because USB transfers are packetized; it might take sixteen packets to transfer your 1KByte buffer, and ten of them might -have transferred succesfully before the completion is called. +have transferred succesfully before the completion was called. NOTE: ***** WARNING ***** -Don't use urb->dev field in your completion handler; it's cleared -as part of giving urbs back to drivers. (Addressing an issue with -ownership of periodic URBs, which was otherwise ambiguous.) Instead, -use urb->context to hold all the data your driver needs. - -NOTE: ***** WARNING ***** -Also, NEVER SLEEP IN A COMPLETION HANDLER. These are normally called +NEVER SLEEP IN A COMPLETION HANDLER. These are normally called during hardware interrupt processing. If you can, defer substantial work to a tasklet (bottom half) to keep system latencies low. You'll probably need to use spinlocks to protect data structures you manipulate @@ -229,24 +231,10 @@ ISO data with some other event stream. Interrupt transfers, like isochronous transfers, are periodic, and happen in intervals that are powers of two (1, 2, 4 etc) units. Units are frames for full and low speed devices, and microframes for high speed ones. - -Currently, after you submit one interrupt URB, that urb is owned by the -host controller driver until you cancel it with usb_unlink_urb(). You -may unlink interrupt urbs in their completion handlers, if you need to. - -After a transfer completion is called, the URB is automagically resubmitted. -THIS BEHAVIOR IS EXPECTED TO BE REMOVED!! - -Interrupt transfers may only send (or receive) the "maxpacket" value for -the given interrupt endpoint; if you need more data, you will need to -copy that data out of (or into) another buffer. Similarly, you can't -queue interrupt transfers. -THESE RESTRICTIONS ARE EXPECTED TO BE REMOVED!! - -Note that this automagic resubmission model does make it awkward to use -interrupt OUT transfers. The portable solution involves unlinking those -OUT urbs after the data is transferred, and perhaps submitting a final -URB for a short packet. - The usb_submit_urb() call modifies urb->interval to the implemented interval value that is less than or equal to the requested interval value. + +In Linux 2.6, unlike earlier versions, interrupt URBs are not automagically +restarted when they complete. They end when the completion handler is +called, just like other URBs. If you want an interrupt URB to be restarted, +your completion handler must resubmit it. diff --git a/Documentation/usb/bluetooth.txt b/Documentation/usb/bluetooth.txt deleted file mode 100644 index 774f5d3..0000000 --- a/Documentation/usb/bluetooth.txt +++ /dev/null @@ -1,44 +0,0 @@ -INTRODUCTION - - The USB Bluetooth driver supports any USB Bluetooth device. - It currently works well with the Linux USB Bluetooth stack from Axis - (available at http://developer.axis.com/software/bluetooth/ ) and - has been rumored to work with other Linux USB Bluetooth stacks. - - -CONFIGURATION - - Currently the driver can handle up to 256 different USB Bluetooth - devices at once. - - If you are not using devfs: - The major number that the driver uses is 216 so to use the driver, - create the following nodes: - mknod /dev/ttyUB0 c 216 0 - mknod /dev/ttyUB1 c 216 1 - mknod /dev/ttyUB2 c 216 2 - mknod /dev/ttyUB3 c 216 3 - . - . - . - mknod /dev/ttyUB254 c 216 254 - mknod /dev/ttyUB255 c 216 255 - - If you are using devfs: - The devices supported by this driver will show up as - /dev/usb/ttub/{0,1,...} - - When the device is connected and recognized by the driver, the driver - will print to the system log, which node the device has been bound to. - - -CONTACT: - - If anyone has any problems using this driver, please contact me, or - join the Linux-USB mailing list (information on joining the mailing - list, as well as a link to its searchable archive is at - http://www.linux-usb.org/ ) - - -Greg Kroah-Hartman -greg@kroah.com diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt index 1e36f16..867f4c3 100644 --- a/Documentation/usb/error-codes.txt +++ b/Documentation/usb/error-codes.txt @@ -46,8 +46,9 @@ USB-specific: -EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable in the current interface altsetting. - (b) ISO packet is biger than endpoint maxpacket - (c) requested data transfer size is invalid (negative) + (b) ISO packet is larger than the endpoint maxpacket. + (c) requested data transfer length is invalid: negative + or too large for the host controller. -ENOSPC This request would overcommit the usb bandwidth reserved for periodic transfers (interrupt, isochronous). diff --git a/Documentation/usb/ibmcam.txt b/Documentation/usb/ibmcam.txt index ce2f21a..c250036 100644 --- a/Documentation/usb/ibmcam.txt +++ b/Documentation/usb/ibmcam.txt @@ -28,8 +28,8 @@ SUPPORTED CAMERAS: Xirlink "C-It" camera, also known as "IBM PC Camera". The device uses proprietary ASIC (and compression method); it is manufactured by Xirlink. See http://www.xirlink.com/ -http://www.ibmpccamera.com or http://www.c-itnow.com/ for -details and pictures. +(renamed to http://www.veo.com), http://www.ibmpccamera.com, +or http://www.c-itnow.com/ for details and pictures. This very chipset ("X Chip", as marked at the factory) is used in several other cameras, and they are supported diff --git a/Documentation/usb/ov511.txt b/Documentation/usb/ov511.txt index e1974ec..a7fc043 100644 --- a/Documentation/usb/ov511.txt +++ b/Documentation/usb/ov511.txt @@ -22,8 +22,8 @@ WHAT YOU NEED: http://www.ovt.com/omniusbp.html - A Video4Linux compatible frame grabber program (I recommend vidcat and xawtv) - vidcat is part of the w3cam package: http://www.hdk-berlin.de/~rasca/w3cam/ - xawtv is available at: http://www.in-berlin.de/User/kraxel/xawtv.html + vidcat is part of the w3cam package: http://mpx.freeshell.net/ + xawtv is available at: http://linux.bytesex.org/xawtv/ HOW TO USE IT: diff --git a/Documentation/usb/rio.txt b/Documentation/usb/rio.txt index 0aa79ab..ab21db4 100644 --- a/Documentation/usb/rio.txt +++ b/Documentation/usb/rio.txt @@ -46,9 +46,9 @@ Contact information: -------------------- The main page for the project is hosted at sourceforge.net in the following - address: http://rio500.sourceforge.net You can also go to the sourceforge - project page at: http://sourceforge.net/project/?group_id=1944 There is - also a mailing list: rio500-users@lists.sourceforge.net + URL: <http://rio500.sourceforge.net>. You can also go to the project's + sourceforge home page at: <http://sourceforge.net/projects/rio500/>. + There is also a mailing list: rio500-users@lists.sourceforge.net Authors: ------- diff --git a/Documentation/video4linux/API.html b/Documentation/video4linux/API.html index 441407b..afbe9ae 100644 --- a/Documentation/video4linux/API.html +++ b/Documentation/video4linux/API.html @@ -8,7 +8,7 @@ V4L original API</a> </td><td> Obsoleted by V4L2 API </td></tr><tr><td> -<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L2_API.html> +<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L2_API> V4L2 API</a> </td><td> Should be used for new projects diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index ec785f9..330246a 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -1,137 +1,143 @@ -card=0 - *** UNKNOWN/GENERIC *** -card=1 - MIRO PCTV -card=2 - Hauppauge (bt848) -card=3 - STB, Gateway P/N 6000699 (bt848) -card=4 - Intel Create and Share PCI/ Smart Video Recorder III -card=5 - Diamond DTV2000 -card=6 - AVerMedia TVPhone -card=7 - MATRIX-Vision MV-Delta -card=8 - Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 -card=9 - IMS/IXmicro TurboTV -card=10 - Hauppauge (bt878) -card=11 - MIRO PCTV pro -card=12 - ADS Technologies Channel Surfer TV (bt848) -card=13 - AVerMedia TVCapture 98 -card=14 - Aimslab Video Highway Xtreme (VHX) -card=15 - Zoltrix TV-Max -card=16 - Prolink Pixelview PlayTV (bt878) -card=17 - Leadtek WinView 601 -card=18 - AVEC Intercapture -card=19 - Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only) -card=20 - CEI Raffles Card -card=21 - Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 -card=22 - Askey CPH050/ Phoebe Tv Master + FM -card=23 - Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 -card=24 - Askey CPH05X/06X (bt878) [many vendors] -card=25 - Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar -card=26 - Hauppauge WinCam newer (bt878) -card=27 - Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 -card=28 - Terratec TerraTV+ Version 1.1 (bt878) -card=29 - Imagenation PXC200 -card=30 - Lifeview FlyVideo 98 LR50 -card=31 - Formac iProTV, Formac ProTV I (bt848) -card=32 - Intel Create and Share PCI/ Smart Video Recorder III -card=33 - Terratec TerraTValue Version Bt878 -card=34 - Leadtek WinFast 2000/ WinFast 2000 XP -card=35 - Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II -card=36 - Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner -card=37 - Prolink PixelView PlayTV pro -card=38 - Askey CPH06X TView99 -card=39 - Pinnacle PCTV Studio/Rave -card=40 - STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 -card=41 - AVerMedia TVPhone 98 -card=42 - ProVideo PV951 -card=43 - Little OnAir TV -card=44 - Sigma TVII-FM -card=45 - MATRIX-Vision MV-Delta 2 -card=46 - Zoltrix Genie TV/FM -card=47 - Terratec TV/Radio+ -card=48 - Askey CPH03x/ Dynalink Magic TView -card=49 - IODATA GV-BCTV3/PCI -card=50 - Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP -card=51 - Eagle Wireless Capricorn2 (bt878A) -card=52 - Pinnacle PCTV Studio Pro -card=53 - Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS -card=54 - Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] -card=55 - Askey CPH031/ BESTBUY Easy TV -card=56 - Lifeview FlyVideo 98FM LR50 -card=57 - GrandTec 'Grand Video Capture' (Bt848) -card=58 - Askey CPH060/ Phoebe TV Master Only (No FM) -card=59 - Askey CPH03x TV Capturer -card=60 - Modular Technology MM100PCTV -card=61 - AG Electronics GMV1 -card=62 - Askey CPH061/ BESTBUY Easy TV (bt878) -card=63 - ATI TV-Wonder -card=64 - ATI TV-Wonder VE -card=65 - Lifeview FlyVideo 2000S LR90 -card=66 - Terratec TValueRadio -card=67 - IODATA GV-BCTV4/PCI -card=68 - 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA) -card=69 - Active Imaging AIMMS -card=70 - Prolink Pixelview PV-BT878P+ (Rev.4C,8E) -card=71 - Lifeview FlyVideo 98EZ (capture only) LR51 -card=72 - Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) -card=73 - Sensoray 311 -card=74 - RemoteVision MX (RV605) -card=75 - Powercolor MTV878/ MTV878R/ MTV878F -card=76 - Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) -card=77 - GrandTec Multi Capture Card (Bt878) -card=78 - Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF -card=79 - DSP Design TCVIDEO -card=80 - Hauppauge WinTV PVR -card=81 - IODATA GV-BCTV5/PCI -card=82 - Osprey 100/150 (878) -card=83 - Osprey 100/150 (848) -card=84 - Osprey 101 (848) -card=85 - Osprey 101/151 -card=86 - Osprey 101/151 w/ svid -card=87 - Osprey 200/201/250/251 -card=88 - Osprey 200/250 -card=89 - Osprey 210/220 -card=90 - Osprey 500 -card=91 - Osprey 540 -card=92 - Osprey 2000 -card=93 - IDS Eagle -card=94 - Pinnacle PCTV Sat -card=95 - Formac ProTV II (bt878) -card=96 - MachTV -card=97 - Euresys Picolo -card=98 - ProVideo PV150 -card=99 - AD-TVK503 -card=100 - Hercules Smart TV Stereo -card=101 - Pace TV & Radio Card -card=102 - IVC-200 -card=103 - Grand X-Guard / Trust 814PCI -card=104 - Nebula Electronics DigiTV -card=105 - ProVideo PV143 -card=106 - PHYTEC VD-009-X1 MiniDIN (bt878) -card=107 - PHYTEC VD-009-X1 Combi (bt878) -card=108 - PHYTEC VD-009 MiniDIN (bt878) -card=109 - PHYTEC VD-009 Combi (bt878) -card=110 - IVC-100 -card=111 - IVC-120G -card=112 - pcHDTV HD-2000 TV -card=113 - Twinhan DST + clones -card=114 - Winfast VC100 -card=115 - Teppro TEV-560/InterVision IV-560 -card=116 - SIMUS GVC1100 -card=117 - NGS NGSTV+ -card=118 - LMLBT4 -card=119 - Tekram M205 PRO -card=120 - Conceptronic CONTVFMi -card=121 - Euresys Picolo Tetra -card=122 - Spirit TV Tuner -card=123 - AVerMedia AVerTV DVB-T 771 -card=124 - AverMedia AverTV DVB-T 761 -card=125 - MATRIX Vision Sigma-SQ -card=126 - MATRIX Vision Sigma-SLC -card=127 - APAC Viewcomp 878(AMAX) -card=128 - DViCO FusionHDTV DVB-T Lite -card=129 - V-Gear MyVCD -card=130 - Super TV Tuner -card=131 - Tibet Systems 'Progress DVR' CS16 -card=132 - Kodicom 4400R (master) -card=133 - Kodicom 4400R (slave) -card=134 - Adlink RTV24 -card=135 - DViCO FusionHDTV 5 Lite -card=136 - Acorp Y878F + 0 -> *** UNKNOWN/GENERIC *** + 1 -> MIRO PCTV + 2 -> Hauppauge (bt848) + 3 -> STB, Gateway P/N 6000699 (bt848) + 4 -> Intel Create and Share PCI/ Smart Video Recorder III + 5 -> Diamond DTV2000 + 6 -> AVerMedia TVPhone + 7 -> MATRIX-Vision MV-Delta + 8 -> Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 + 9 -> IMS/IXmicro TurboTV + 10 -> Hauppauge (bt878) [0070:13eb,0070:3900,2636:10b4] + 11 -> MIRO PCTV pro + 12 -> ADS Technologies Channel Surfer TV (bt848) + 13 -> AVerMedia TVCapture 98 [1461:0002,1461:0004,1461:0300] + 14 -> Aimslab Video Highway Xtreme (VHX) + 15 -> Zoltrix TV-Max [a1a0:a0fc] + 16 -> Prolink Pixelview PlayTV (bt878) + 17 -> Leadtek WinView 601 + 18 -> AVEC Intercapture + 19 -> Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only) + 20 -> CEI Raffles Card + 21 -> Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 + 22 -> Askey CPH050/ Phoebe Tv Master + FM [14ff:3002] + 23 -> Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 [14c7:0101] + 24 -> Askey CPH05X/06X (bt878) [many vendors] [144f:3002,144f:3005,144f:5000,14ff:3000] + 25 -> Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar + 26 -> Hauppauge WinCam newer (bt878) + 27 -> Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 + 28 -> Terratec TerraTV+ Version 1.1 (bt878) [153b:1127,1852:1852] + 29 -> Imagenation PXC200 [1295:200a] + 30 -> Lifeview FlyVideo 98 LR50 [1f7f:1850] + 31 -> Formac iProTV, Formac ProTV I (bt848) + 32 -> Intel Create and Share PCI/ Smart Video Recorder III + 33 -> Terratec TerraTValue Version Bt878 [153b:1117,153b:1118,153b:1119,153b:111a,153b:1134,153b:5018] + 34 -> Leadtek WinFast 2000/ WinFast 2000 XP [107d:6606,107d:6609,6606:217d,f6ff:fff6] + 35 -> Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II [1851:1850,1851:a050] + 36 -> Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner [1852:1852] + 37 -> Prolink PixelView PlayTV pro + 38 -> Askey CPH06X TView99 [144f:3000,144f:a005,a04f:a0fc] + 39 -> Pinnacle PCTV Studio/Rave [11bd:0012,bd11:1200,bd11:ff00,11bd:ff12] + 40 -> STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 [10b4:2636,10b4:2645,121a:3060] + 41 -> AVerMedia TVPhone 98 [1461:0001,1461:0003] + 42 -> ProVideo PV951 [aa0c:146c] + 43 -> Little OnAir TV + 44 -> Sigma TVII-FM + 45 -> MATRIX-Vision MV-Delta 2 + 46 -> Zoltrix Genie TV/FM [15b0:4000,15b0:400a,15b0:400d,15b0:4010,15b0:4016] + 47 -> Terratec TV/Radio+ [153b:1123] + 48 -> Askey CPH03x/ Dynalink Magic TView + 49 -> IODATA GV-BCTV3/PCI [10fc:4020] + 50 -> Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP + 51 -> Eagle Wireless Capricorn2 (bt878A) + 52 -> Pinnacle PCTV Studio Pro + 53 -> Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS + 54 -> Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] + 55 -> Askey CPH031/ BESTBUY Easy TV + 56 -> Lifeview FlyVideo 98FM LR50 [a051:41a0] + 57 -> GrandTec 'Grand Video Capture' (Bt848) [4344:4142] + 58 -> Askey CPH060/ Phoebe TV Master Only (No FM) + 59 -> Askey CPH03x TV Capturer + 60 -> Modular Technology MM100PCTV + 61 -> AG Electronics GMV1 [15cb:0101] + 62 -> Askey CPH061/ BESTBUY Easy TV (bt878) + 63 -> ATI TV-Wonder [1002:0001] + 64 -> ATI TV-Wonder VE [1002:0003] + 65 -> Lifeview FlyVideo 2000S LR90 + 66 -> Terratec TValueRadio [153b:1135,153b:ff3b] + 67 -> IODATA GV-BCTV4/PCI [10fc:4050] + 68 -> 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA) [121a:3000,10b4:2637] + 69 -> Active Imaging AIMMS + 70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E) + 71 -> Lifeview FlyVideo 98EZ (capture only) LR51 [1851:1851] + 72 -> Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [1554:4011] + 73 -> Sensoray 311 [6000:0311] + 74 -> RemoteVision MX (RV605) + 75 -> Powercolor MTV878/ MTV878R/ MTV878F + 76 -> Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) [0e11:0079] + 77 -> GrandTec Multi Capture Card (Bt878) + 78 -> Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [0a01:17de] + 79 -> DSP Design TCVIDEO + 80 -> Hauppauge WinTV PVR [0070:4500] + 81 -> IODATA GV-BCTV5/PCI [10fc:4070,10fc:d018] + 82 -> Osprey 100/150 (878) [0070:ff00] + 83 -> Osprey 100/150 (848) + 84 -> Osprey 101 (848) + 85 -> Osprey 101/151 + 86 -> Osprey 101/151 w/ svid + 87 -> Osprey 200/201/250/251 + 88 -> Osprey 200/250 [0070:ff01] + 89 -> Osprey 210/220 + 90 -> Osprey 500 [0070:ff02] + 91 -> Osprey 540 [0070:ff04] + 92 -> Osprey 2000 [0070:ff03] + 93 -> IDS Eagle + 94 -> Pinnacle PCTV Sat [11bd:001c] + 95 -> Formac ProTV II (bt878) + 96 -> MachTV + 97 -> Euresys Picolo + 98 -> ProVideo PV150 [aa00:1460,aa01:1461,aa02:1462,aa03:1463,aa04:1464,aa05:1465,aa06:1466,aa07:1467] + 99 -> AD-TVK503 +100 -> Hercules Smart TV Stereo +101 -> Pace TV & Radio Card +102 -> IVC-200 [0000:a155,0001:a155,0002:a155,0003:a155,0100:a155,0101:a155,0102:a155,0103:a155] +103 -> Grand X-Guard / Trust 814PCI [0304:0102] +104 -> Nebula Electronics DigiTV [0071:0101] +105 -> ProVideo PV143 [aa00:1430,aa00:1431,aa00:1432,aa00:1433,aa03:1433] +106 -> PHYTEC VD-009-X1 MiniDIN (bt878) +107 -> PHYTEC VD-009-X1 Combi (bt878) +108 -> PHYTEC VD-009 MiniDIN (bt878) +109 -> PHYTEC VD-009 Combi (bt878) +110 -> IVC-100 [ff00:a132] +111 -> IVC-120G [ff00:a182,ff01:a182,ff02:a182,ff03:a182,ff04:a182,ff05:a182,ff06:a182,ff07:a182,ff08:a182,ff09:a182,ff0a:a182,ff0b:a182,ff0c:a182,ff0d:a182,ff0e:a182,ff0f:a182] +112 -> pcHDTV HD-2000 TV [7063:2000] +113 -> Twinhan DST + clones [11bd:0026,1822:0001,270f:fc00] +114 -> Winfast VC100 [107d:6607] +115 -> Teppro TEV-560/InterVision IV-560 +116 -> SIMUS GVC1100 [aa6a:82b2] +117 -> NGS NGSTV+ +118 -> LMLBT4 +119 -> Tekram M205 PRO +120 -> Conceptronic CONTVFMi +121 -> Euresys Picolo Tetra [1805:0105,1805:0106,1805:0107,1805:0108] +122 -> Spirit TV Tuner +123 -> AVerMedia AVerTV DVB-T 771 [1461:0771] +124 -> AverMedia AverTV DVB-T 761 [1461:0761] +125 -> MATRIX Vision Sigma-SQ +126 -> MATRIX Vision Sigma-SLC +127 -> APAC Viewcomp 878(AMAX) +128 -> DViCO FusionHDTV DVB-T Lite [18ac:db10] +129 -> V-Gear MyVCD +130 -> Super TV Tuner +131 -> Tibet Systems 'Progress DVR' CS16 +132 -> Kodicom 4400R (master) +133 -> Kodicom 4400R (slave) +134 -> Adlink RTV24 +135 -> DViCO FusionHDTV 5 Lite [18ac:d500] +136 -> Acorp Y878F [9511:1540] +137 -> Conceptronic CTVFMi v2 +138 -> Prolink Pixelview PV-BT878P+ (Rev.2E) +139 -> Prolink PixelView PlayTV MPEG2 PV-M4900 +140 -> Osprey 440 [0070:ff07] +141 -> Asound Skyeye PCTV +142 -> Sabrent TV-FM (bttv version) diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 03deb07..a1017d1 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -1,32 +1,37 @@ -card=0 - UNKNOWN/GENERIC -card=1 - Hauppauge WinTV 34xxx models -card=2 - GDI Black Gold -card=3 - PixelView -card=4 - ATI TV Wonder Pro -card=5 - Leadtek Winfast 2000XP Expert -card=6 - AverTV Studio 303 (M126) -card=7 - MSI TV-@nywhere Master -card=8 - Leadtek Winfast DV2000 -card=9 - Leadtek PVR 2000 -card=10 - IODATA GV-VCP3/PCI -card=11 - Prolink PlayTV PVR -card=12 - ASUS PVR-416 -card=13 - MSI TV-@nywhere -card=14 - KWorld/VStream XPert DVB-T -card=15 - DViCO FusionHDTV DVB-T1 -card=16 - KWorld LTV883RF -card=17 - DViCO FusionHDTV 3 Gold-Q -card=18 - Hauppauge Nova-T DVB-T -card=19 - Conexant DVB-T reference design -card=20 - Provideo PV259 -card=21 - DViCO FusionHDTV DVB-T Plus -card=22 - digitalnow DNTV Live! DVB-T -card=23 - pcHDTV HD3000 HDTV -card=24 - Hauppauge WinTV 28xxx (Roslyn) models -card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC) -card=26 - IODATA GV/BCTV7E -card=27 - PixelView PlayTV Ultra Pro (Stereo) -card=28 - DViCO FusionHDTV 3 Gold-T -card=29 - ADS Tech Instant TV DVB-T PCI -card=30 - TerraTec Cinergy 1400 DVB-T -card=31 - DViCO FusionHDTV 5 Gold + 0 -> UNKNOWN/GENERIC + 1 -> Hauppauge WinTV 34xxx models [0070:3400,0070:3401] + 2 -> GDI Black Gold [14c7:0106,14c7:0107] + 3 -> PixelView [1554:4811] + 4 -> ATI TV Wonder Pro [1002:00f8] + 5 -> Leadtek Winfast 2000XP Expert [107d:6611,107d:6613] + 6 -> AverTV Studio 303 (M126) [1461:000b] + 7 -> MSI TV-@nywhere Master [1462:8606] + 8 -> Leadtek Winfast DV2000 [107d:6620] + 9 -> Leadtek PVR 2000 [107d:663b,107d:663C] + 10 -> IODATA GV-VCP3/PCI [10fc:d003] + 11 -> Prolink PlayTV PVR + 12 -> ASUS PVR-416 [1043:4823] + 13 -> MSI TV-@nywhere + 14 -> KWorld/VStream XPert DVB-T [17de:08a6] + 15 -> DViCO FusionHDTV DVB-T1 [18ac:db00] + 16 -> KWorld LTV883RF + 17 -> DViCO FusionHDTV 3 Gold-Q [18ac:d810] + 18 -> Hauppauge Nova-T DVB-T [0070:9002] + 19 -> Conexant DVB-T reference design [14f1:0187] + 20 -> Provideo PV259 [1540:2580] + 21 -> DViCO FusionHDTV DVB-T Plus [18ac:db10] + 22 -> pcHDTV HD3000 HDTV [7063:3000] + 23 -> digitalnow DNTV Live! DVB-T [17de:a8a6] + 24 -> Hauppauge WinTV 28xxx (Roslyn) models [0070:2801] + 25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) [14f1:0342] + 26 -> IODATA GV/BCTV7E [10fc:d035] + 27 -> PixelView PlayTV Ultra Pro (Stereo) + 28 -> DViCO FusionHDTV 3 Gold-T [18ac:d820] + 29 -> ADS Tech Instant TV DVB-T PCI [1421:0334] + 30 -> TerraTec Cinergy 1400 DVB-T [153b:1166] + 31 -> DViCO FusionHDTV 5 Gold [18ac:d500] + 32 -> AverMedia UltraTV Media Center PCI 550 [1461:8011] + 33 -> Kworld V-Stream Xpert DVD + 34 -> ATI HDTV Wonder [1002:a101] + 35 -> WinFast DTV1000-T [107d:665f] + 36 -> AVerTV 303 (M126) [1461:000a] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx new file mode 100644 index 0000000..a0c7cad --- /dev/null +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -0,0 +1,10 @@ + 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] + 1 -> Unknown EM2820/2840 video grabber (em2820/em2840) + 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] + 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] + 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200] + 5 -> MSI VOX USB 2.0 (em2820/em2840) [eb1a:2820] + 6 -> Terratec Cinergy 200 USB (em2800) + 7 -> Leadtek Winfast USB II (em2800) + 8 -> Kworld USB2800 (em2800) + 9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index dc57225..efb708e 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -6,10 +6,10 @@ 5 -> SKNet Monster TV [1131:4e85] 6 -> Tevion MD 9717 7 -> KNC One TV-Station RDS / Typhoon TV Tuner RDS [1131:fe01,1894:fe01] - 8 -> Terratec Cinergy 400 TV [153B:1142] + 8 -> Terratec Cinergy 400 TV [153b:1142] 9 -> Medion 5044 10 -> Kworld/KuroutoShikou SAA7130-TVPCI - 11 -> Terratec Cinergy 600 TV [153B:1143] + 11 -> Terratec Cinergy 600 TV [153b:1143] 12 -> Medion 7134 [16be:0003] 13 -> Typhoon TV+Radio 90031 14 -> ELSA EX-VISION 300TV [1048:226b] @@ -36,8 +36,8 @@ 35 -> AverMedia AverTV Studio 305 [1461:2115] 36 -> UPMOST PURPLE TV [12ab:0800] 37 -> Items MuchTV Plus / IT-005 - 38 -> Terratec Cinergy 200 TV [153B:1152] - 39 -> LifeView FlyTV Platinum Mini [5168:0212] + 38 -> Terratec Cinergy 200 TV [153b:1152] + 39 -> LifeView FlyTV Platinum Mini [5168:0212,4e42:0212] 40 -> Compro VideoMate TV PVR/FM [185b:c100] 41 -> Compro VideoMate TV Gold+ [185b:c100] 42 -> Sabrent SBT-TVFM (saa7130) @@ -46,7 +46,7 @@ 45 -> Avermedia AVerTV Studio 307 [1461:9715] 46 -> AVerMedia Cardbus TV/Radio (E500) [1461:d6ee] 47 -> Terratec Cinergy 400 mobile [153b:1162] - 48 -> Terratec Cinergy 600 TV MK3 [153B:1158] + 48 -> Terratec Cinergy 600 TV MK3 [153b:1158] 49 -> Compro VideoMate Gold+ Pal [185b:c200] 50 -> Pinnacle PCTV 300i DVB-T + PAL [11bd:002d] 51 -> ProVideo PV952 [1540:9524] @@ -56,12 +56,29 @@ 55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306] 56 -> Avermedia AVerTV 307 [1461:a70a] 57 -> Avermedia AVerTV GO 007 FM [1461:f31f] - 58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0370] + 58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0370,1421:1370] 59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502] 61 -> Philips TOUGH DVB-T reference design [1131:2004] 62 -> Compro VideoMate TV Gold+II 63 -> Kworld Xpert TV PVR7134 - 64 -> FlyTV mini Asus Digimatrix [1043:0210,1043:0210] + 64 -> FlyTV mini Asus Digimatrix [1043:0210] 65 -> V-Stream Studio TV Terminator 66 -> Yuan TUN-900 (saa7135) + 67 -> Beholder BeholdTV 409 FM [0000:4091] + 68 -> GoTView 7135 PCI [5456:7135] + 69 -> Philips EUROPA V3 reference design [1131:2004] + 70 -> Compro Videomate DVB-T300 [185b:c900] + 71 -> Compro Videomate DVB-T200 [185b:c901] + 72 -> RTD Embedded Technologies VFG7350 [1435:7350] + 73 -> RTD Embedded Technologies VFG7330 [1435:7330] + 74 -> LifeView FlyTV Platinum Mini2 [14c0:1212] + 75 -> AVerMedia AVerTVHD MCE A180 [1461:1044] + 76 -> SKNet MonsterTV Mobile [1131:4ee9] + 77 -> Pinnacle PCTV 110i (saa7133) [11bd:002e] + 78 -> ASUSTeK P7131 Dual [1043:4862] + 79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) + 80 -> ASUS Digimatrix TV [1043:0210] + 81 -> Philips Tiger reference design [1131:2018] + 82 -> MSI TV@Anywhere plus [1462:6231] + diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index f5876be..9d6544e 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -53,7 +53,7 @@ tuner=51 - Philips PAL/SECAM_D (FM 1256 I-H3) tuner=52 - Thomson DDT 7610 (ATSC/NTSC) tuner=53 - Philips FQ1286 tuner=54 - tda8290+75 -tuner=55 - LG PAL (TAPE series) +tuner=55 - TCL 2002MB tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4) tuner=57 - Philips FQ1236A MK4 tuner=58 - Ymec TVision TVF-8531MF/8831MF/8731MF @@ -65,3 +65,6 @@ tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner tuner=64 - LG TDVS-H062F/TUA6034 tuner=65 - Ymec TVF66T5-B/DFF tuner=66 - LG NTSC (TALN mini series) +tuner=67 - Philips TD1316 Hybrid Tuner +tuner=68 - Philips TUV1236D ATSC/NTSC dual in +tuner=69 - Tena TNF 5335 MF diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88 index 897ab83..06a33a4 100644 --- a/Documentation/video4linux/README.cx88 +++ b/Documentation/video4linux/README.cx88 @@ -17,9 +17,9 @@ audio - The chip specs for the on-chip TV sound decoder are next to useless :-/ - Neverless the builtin TV sound decoder starts working now, - at least for PAL-BG. Other TV norms need other code ... - FOR ANY REPORTS ON THIS PLEASE MENTION THE TV NORM YOU ARE - USING. + at least for PAL-BG. Other TV norms need other code ... + FOR ANY REPORTS ON THIS PLEASE MENTION THE TV NORM YOU ARE + USING. - Most tuner chips do provide mono sound, which may or may not be useable depending on the board design. With the Hauppauge cards it works, so there is mono sound available as fallback. @@ -65,5 +65,5 @@ Have fun, Gerd --- +-- Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] diff --git a/Documentation/video4linux/README.saa7134 b/Documentation/video4linux/README.saa7134 index 1f788e4..b911f08 100644 --- a/Documentation/video4linux/README.saa7134 +++ b/Documentation/video4linux/README.saa7134 @@ -78,5 +78,5 @@ Have fun, Gerd --- +-- Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards index 8f1941e..d338965 100644 --- a/Documentation/video4linux/bttv/Cards +++ b/Documentation/video4linux/bttv/Cards @@ -149,11 +149,11 @@ Lifeview Flyvideo Series: 2) There is a print on the PCB: LR25 = Flyvideo (Zoran ZR36120, SAA7110A) LR26 Rev.N = Flyvideo II (Bt848) - Rev.O = Flyvideo II (Bt878) + Rev.O = Flyvideo II (Bt878) LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110) LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only) LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID) - Rev.W = Flyvideo 98 (no eeprom) + Rev.W = Flyvideo 98 (no eeprom) LR51 Rev.E = Flyvideo 98 EZ (capture only) LR90 = Flyvideo 2000 (Bt878) Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard) @@ -163,7 +163,7 @@ Lifeview Flyvideo Series: LR136 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134) LR137 = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394) LR138 Rev.C= Flyvideo 2000 (SAA7130) - or Flyvideo 3000 (SAA7134) w/Stereo TV + or Flyvideo 3000 (SAA7134) w/Stereo TV These exist in variations w/FM and w/Remote sometimes denoted by suffixes "FM" and "R". 3) You have a laptop (miniPCI card): @@ -197,7 +197,7 @@ Typhoon TV card series: 50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B) 50681 "TV Tuner PCI Pal I" (variant of 50680) 50682 "TView TV/FM Tuner Pal BG" = Flyvideo 98FM (LR50 Rev.Q) - Note: The package has a picture of CPH05x (which would be a real TView) + Note: The package has a picture of CPH05x (which would be a real TView) 50683 "TV Tuner PCI SECAM" (variant of 50680) 50684 "TV Tuner Pal BG" = Pixelview 878TV(Rev.3D) 50686 "TV Tuner" = KNC1 TV Station @@ -418,9 +418,9 @@ Lifetec/Medion/Tevion/Aldi -------------------------- LT9306/MD9306 = CPH061 LT9415/MD9415 = LR90 Rev.F or Rev.G - MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H) - MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner) - MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner) + MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H) + MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner) + MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner) Modular Technologies (www.modulartech.com) UK --------------------------------------------- @@ -453,10 +453,10 @@ Technisat Discos ADR PC-Karte ISA (no TV!) Discos ADR PC-Karte PCI (probably no TV?) Techni-PC-Sat (Sat. analog) - Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A) + Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A) Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio) Mediafocus II (saa7146, Sat. analog) - SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A) + SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A) SkyStar 1 DVB (AV7110) = Technotrend Premium SkyStar 2 DVB (B2C2) (=Sky2PC) diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README index a72f4c9..7ca2154 100644 --- a/Documentation/video4linux/bttv/README +++ b/Documentation/video4linux/bttv/README @@ -42,9 +42,9 @@ bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists the Subsystem ID in the second line, looks like this: 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) - Subsystem: Hauppauge computer works Inc. WinTV/GO - Flags: bus master, medium devsel, latency 32, IRQ 5 - Memory at e2000000 (32-bit, prefetchable) [size=4K] + Subsystem: Hauppauge computer works Inc. WinTV/GO + Flags: bus master, medium devsel, latency 32, IRQ 5 + Memory at e2000000 (32-bit, prefetchable) [size=4K] only bt878-based cards can have a subsystem ID (which does not mean that every card really has one). bt848 cards can't have a Subsystem diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze index 51f8d43..4259dcc 100644 --- a/Documentation/video4linux/bttv/README.freeze +++ b/Documentation/video4linux/bttv/README.freeze @@ -27,9 +27,9 @@ information out of a register+stack dump printed by the kernel on protection faults (so-called "kernel oops"). If you run into some kind of deadlock, you can try to dump a call trace -for each process using sysrq-t (see Documentation/sysrq.txt). ksymoops -will translate these dumps into kernel symbols too. This way it is -possible to figure where *exactly* some process in "D" state is stuck. +for each process using sysrq-t (see Documentation/sysrq.txt). +This way it is possible to figure where *exactly* some process in "D" +state is stuck. I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid for some people. Thus probably a small buglet left somewhere in bttv diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ index b8c9c26..1e6328f 100644 --- a/Documentation/video4linux/bttv/Sound-FAQ +++ b/Documentation/video4linux/bttv/Sound-FAQ @@ -61,8 +61,8 @@ line for your board. The important fields are these two: struct tvcard { [ ... ] - u32 gpiomask; - u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ + u32 gpiomask; + u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ }; gpiomask specifies which pins are used to control the audio mux chip. @@ -126,11 +126,11 @@ muxsel - video mux, input->registervalue mapping pll - same as pll= insmod option tuner_type - same as tuner= insmod option *_modulename - hint whenever some card needs this or that audio - module loaded to work properly. + module loaded to work properly. has_radio - whenever this TV card has a radio tuner. no_msp34xx - "1" disables loading of msp3400.o module -no_tda9875 - "1" disables loading of tda9875.o module -needs_tvaudio - set to "1" to load tvaudio.o module +no_tda9875 - "1" disables loading of tda9875.o module +needs_tvaudio - set to "1" to load tvaudio.o module If some config item is specified both from the tvcards array and as insmod option, the insmod option takes precedence. @@ -144,5 +144,5 @@ Good luck, PS: If you have a new working entry, mail it to me. --- +-- Gerd Knorr <kraxel@bytesex.org> diff --git a/Documentation/video4linux/bttv/Tuners b/Documentation/video4linux/bttv/Tuners index d18fbc7..0a371d3 100644 --- a/Documentation/video4linux/bttv/Tuners +++ b/Documentation/video4linux/bttv/Tuners @@ -21,7 +21,7 @@ SAMSUNG Tuner identification: (e.g. TCPM9091PD27) J= NTSC-Japan L= Secam LL M= BG+I+DK - N= NTSC + N= NTSC Q= BG+I+DK+LL [89]: ? [125]: @@ -96,7 +96,7 @@ LG Innotek Tuner: TADC-H002F: NTSC (L,175/410?; 2-B, C-W+11, W+12-69) TADC-M201D: PAL D/K+B/G+I (L,143/425) (sound control at I2C address 0xc8) TADC-T003F: NTSC Taiwan (L,175/410?; 2-B, C-W+11, W+12-69) - Suffix: + Suffix: P= Standard phono female socket D= IEC female socket F= F-connector diff --git a/Documentation/video4linux/lifeview.txt b/Documentation/video4linux/lifeview.txt index b07ea79..05f9eb5 100644 --- a/Documentation/video4linux/lifeview.txt +++ b/Documentation/video4linux/lifeview.txt @@ -10,33 +10,33 @@ bt878: ------------------------------------------------------------------------------ saa7134: - /* LifeView FlyTV Platinum FM (LR214WF) */ - /* "Peter Missel <peter.missel@onlinehome.de> */ - .name = "LifeView FlyTV Platinum FM", - /* GP27 MDT2005 PB4 pin 10 */ - /* GP26 MDT2005 PB3 pin 9 */ - /* GP25 MDT2005 PB2 pin 8 */ - /* GP23 MDT2005 PB1 pin 7 */ - /* GP22 MDT2005 PB0 pin 6 */ - /* GP21 MDT2005 PB5 pin 11 */ - /* GP20 MDT2005 PB6 pin 12 */ - /* GP19 MDT2005 PB7 pin 13 */ - /* nc MDT2005 PA3 pin 2 */ - /* Remote MDT2005 PA2 pin 1 */ - /* GP18 MDT2005 PA1 pin 18 */ - /* nc MDT2005 PA0 pin 17 strap low */ + /* LifeView FlyTV Platinum FM (LR214WF) */ + /* "Peter Missel <peter.missel@onlinehome.de> */ + .name = "LifeView FlyTV Platinum FM", + /* GP27 MDT2005 PB4 pin 10 */ + /* GP26 MDT2005 PB3 pin 9 */ + /* GP25 MDT2005 PB2 pin 8 */ + /* GP23 MDT2005 PB1 pin 7 */ + /* GP22 MDT2005 PB0 pin 6 */ + /* GP21 MDT2005 PB5 pin 11 */ + /* GP20 MDT2005 PB6 pin 12 */ + /* GP19 MDT2005 PB7 pin 13 */ + /* nc MDT2005 PA3 pin 2 */ + /* Remote MDT2005 PA2 pin 1 */ + /* GP18 MDT2005 PA1 pin 18 */ + /* nc MDT2005 PA0 pin 17 strap low */ - /* GP17 Strap "GP7"=High */ - /* GP16 Strap "GP6"=High - 0=Radio 1=TV - Drives SA630D ENCH1 and HEF4052 A1 pins - to do FM radio through SIF input */ - /* GP15 nc */ - /* GP14 nc */ - /* GP13 nc */ - /* GP12 Strap "GP5" = High */ - /* GP11 Strap "GP4" = High */ - /* GP10 Strap "GP3" = High */ - /* GP09 Strap "GP2" = Low */ - /* GP08 Strap "GP1" = Low */ - /* GP07.00 nc */ + /* GP17 Strap "GP7"=High */ + /* GP16 Strap "GP6"=High + 0=Radio 1=TV + Drives SA630D ENCH1 and HEF4052 A1 pins + to do FM radio through SIF input */ + /* GP15 nc */ + /* GP14 nc */ + /* GP13 nc */ + /* GP12 Strap "GP5" = High */ + /* GP11 Strap "GP4" = High */ + /* GP10 Strap "GP3" = High */ + /* GP09 Strap "GP2" = Low */ + /* GP08 Strap "GP1" = Low */ + /* GP07.00 nc */ diff --git a/Documentation/video4linux/zr36120.txt b/Documentation/video4linux/zr36120.txt index 4af6c52..5d6357e 100644 --- a/Documentation/video4linux/zr36120.txt +++ b/Documentation/video4linux/zr36120.txt @@ -76,8 +76,11 @@ activates the GRAB bit. A few ms later the VSYNC (re-)rises and the zoran starts to work on a new and freshly broadcasted frame.... For pointers I used the specs of both chips. Below are the URLs: - http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf - http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf + http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf + http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf +Some alternatives for the Philips SAA 7110 datasheet are: + http://www.datasheetcatalog.com/datasheets_pdf/S/A/A/7/SAA7110.shtml + http://www.datasheetarchive.com/search.php?search=SAA7110&sType=part The documentation has very little on absolute numbers or timings needed for the various modes/resolutions, but there are other diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 1b9bcd1..1ad9af1 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -13,12 +13,13 @@ This optimization is more critical now as bigger and bigger physical memories Users can use the huge page support in Linux kernel by either using the mmap system call or standard SYSv shared memory system calls (shmget, shmat). -First the Linux kernel needs to be built with CONFIG_HUGETLB_PAGE (present -under Processor types and feature) and CONFIG_HUGETLBFS (present under file -system option on config menu) config options. +First the Linux kernel needs to be built with the CONFIG_HUGETLBFS +(present under "File systems") and CONFIG_HUGETLB_PAGE (selected +automatically when CONFIG_HUGETLBFS is selected) configuration +options. The kernel built with hugepage support should show the number of configured -hugepages in the system by running the "cat /proc/meminfo" command. +hugepages in the system by running the "cat /proc/meminfo" command. /proc/meminfo also provides information about the total number of hugetlb pages configured in the kernel. It also displays information about the @@ -38,19 +39,19 @@ in the kernel. /proc/sys/vm/nr_hugepages indicates the current number of configured hugetlb pages in the kernel. Super user can dynamically request more (or free some -pre-configured) hugepages. -The allocation( or deallocation) of hugetlb pages is posible only if there are +pre-configured) hugepages. +The allocation (or deallocation) of hugetlb pages is possible only if there are enough physically contiguous free pages in system (freeing of hugepages is -possible only if there are enough hugetlb pages free that can be transfered +possible only if there are enough hugetlb pages free that can be transfered back to regular memory pool). Pages that are used as hugetlb pages are reserved inside the kernel and can -not be used for other purposes. +not be used for other purposes. Once the kernel with Hugetlb page support is built and running, a user can use either the mmap system call or shared memory system calls to start using the huge pages. It is required that the system administrator preallocate -enough memory for huge page purposes. +enough memory for huge page purposes. Use the following command to dynamically allocate/deallocate hugepages: @@ -80,9 +81,9 @@ memory (huge pages) allowed for that filesystem (/mnt/huge). The size is rounded down to HPAGE_SIZE. The option nr_inode sets the maximum number of inodes that /mnt/huge can use. If the size or nr_inode options are not provided on command line then no limits are set. For size and nr_inodes -options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For -example, size=2K has the same meaning as size=2048. An example is given at -the end of this document. +options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For +example, size=2K has the same meaning as size=2048. An example is given at +the end of this document. read and write system calls are not supported on files that reside on hugetlb file systems. diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt index ffe1c06..e566aff 100644 --- a/Documentation/x86_64/boot-options.txt +++ b/Documentation/x86_64/boot-options.txt @@ -7,10 +7,12 @@ Machine check mce=off disable machine check mce=bootlog Enable logging of machine checks left over from booting. - Disabled by default because some BIOS leave bogus ones. + Disabled by default on AMD because some BIOS leave bogus ones. If your BIOS doesn't do that it's a good idea to enable though to make sure you log even machine check events that result - in a reboot. + in a reboot. On Intel systems it is enabled by default. + mce=nobootlog + Disable boot machine check logging. mce=tolerancelevel (number) 0: always panic, 1: panic if deadlock possible, 2: try to avoid panic, 3: never panic or exit (for testing) @@ -122,6 +124,9 @@ SMP cpumask=MASK only use cpus with bits set in mask + additional_cpus=NUM Allow NUM more CPUs for hotplug + (defaults are specified by the BIOS or half the available CPUs) + NUMA numa=off Only set up a single NUMA node spanning all memory. @@ -188,6 +193,9 @@ Debugging kstack=N Print that many words from the kernel stack in oops dumps. + pagefaulttrace Dump all page faults. Only useful for extreme debugging + and will create a lot of output. + Misc noreplacement Don't replace instructions with more appropiate ones diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt index 662b739..133561b 100644 --- a/Documentation/x86_64/mm.txt +++ b/Documentation/x86_64/mm.txt @@ -6,7 +6,7 @@ Virtual memory map with 4 level page tables: 0000000000000000 - 00007fffffffffff (=47bits) user space, different per mm hole caused by [48:63] sign extension ffff800000000000 - ffff80ffffffffff (=40bits) guard hole -ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of phys. memory +ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of all phys. memory ffffc10000000000 - ffffc1ffffffffff (=40bits) hole ffffc20000000000 - ffffe1ffffffffff (=45bits) vmalloc/ioremap space ... unused hole ... @@ -14,6 +14,10 @@ ffffffff80000000 - ffffffff82800000 (=40MB) kernel text mapping, from phys 0 ... unused hole ... ffffffff88000000 - fffffffffff00000 (=1919MB) module mapping space +The direct mapping covers all memory in the system upto the highest +memory address (this means in some cases it can also include PCI memory +holes) + vmalloc space is lazily synchronized into the different PML4 pages of the processes using the page fault handler, with init_level4_pgt as reference. |