diff options
Diffstat (limited to 'Documentation')
19 files changed, 392 insertions, 240 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb index 2be603c..a6b6857 100644 --- a/Documentation/ABI/stable/sysfs-bus-usb +++ b/Documentation/ABI/stable/sysfs-bus-usb @@ -37,8 +37,8 @@ Description: that the USB device has been connected to the machine. This file is read-only. Users: - PowerTOP <power@bughost.org> - http://www.lesswatts.org/projects/powertop/ + PowerTOP <powertop@lists.01.org> + https://01.org/powertop/ What: /sys/bus/usb/device/.../power/active_duration Date: January 2008 @@ -57,8 +57,8 @@ Description: will give an integer percentage. Note that this does not account for counter wrap. Users: - PowerTOP <power@bughost.org> - http://www.lesswatts.org/projects/powertop/ + PowerTOP <powertop@lists.01.org> + https://01.org/powertop/ What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend Date: January 2008 diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index 9d43e76..efe449b 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -1,6 +1,6 @@ What: /sys/devices/.../power/ Date: January 2009 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../power directory contains attributes allowing the user space to check and modify some power @@ -8,7 +8,7 @@ Description: What: /sys/devices/.../power/wakeup Date: January 2009 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../power/wakeup attribute allows the user space to check if the device is enabled to wake up the system @@ -34,7 +34,7 @@ Description: What: /sys/devices/.../power/control Date: January 2009 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../power/control attribute allows the user space to control the run-time power management of the device. @@ -53,7 +53,7 @@ Description: What: /sys/devices/.../power/async Date: January 2009 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../async attribute allows the user space to enable or diasble the device's suspend and resume callbacks to @@ -79,7 +79,7 @@ Description: What: /sys/devices/.../power/wakeup_count Date: September 2010 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_count attribute contains the number of signaled wakeup events associated with the device. This @@ -88,7 +88,7 @@ Description: What: /sys/devices/.../power/wakeup_active_count Date: September 2010 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_active_count attribute contains the number of times the processing of wakeup events associated with @@ -98,7 +98,7 @@ Description: What: /sys/devices/.../power/wakeup_abort_count Date: February 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_abort_count attribute contains the number of times the processing of a wakeup event associated with @@ -109,7 +109,7 @@ Description: What: /sys/devices/.../power/wakeup_expire_count Date: February 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_expire_count attribute contains the number of times a wakeup event associated with the device has @@ -119,7 +119,7 @@ Description: What: /sys/devices/.../power/wakeup_active Date: September 2010 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_active attribute contains either 1, or 0, depending on whether or not a wakeup event associated with @@ -129,7 +129,7 @@ Description: What: /sys/devices/.../power/wakeup_total_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_total_time_ms attribute contains the total time of processing wakeup events associated with the @@ -139,7 +139,7 @@ Description: What: /sys/devices/.../power/wakeup_max_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_max_time_ms attribute contains the maximum time of processing a single wakeup event associated @@ -149,7 +149,7 @@ Description: What: /sys/devices/.../power/wakeup_last_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_last_time_ms attribute contains the value of the monotonic clock corresponding to the time of @@ -160,7 +160,7 @@ Description: What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms Date: February 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute contains the total time the device has been preventing @@ -189,7 +189,7 @@ Description: What: /sys/devices/.../power/pm_qos_latency_us Date: March 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../power/pm_qos_resume_latency_us attribute contains the PM QoS resume latency limit for the given device, @@ -207,7 +207,7 @@ Description: What: /sys/devices/.../power/pm_qos_no_power_off Date: September 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../power/pm_qos_no_power_off attribute is used for manipulating the PM QoS "no power off" flag. If @@ -222,7 +222,7 @@ Description: What: /sys/devices/.../power/pm_qos_remote_wakeup Date: September 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/devices/.../power/pm_qos_remote_wakeup attribute is used for manipulating the PM QoS "remote wakeup required" diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 2177726..205a738 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -1,6 +1,6 @@ What: /sys/power/ Date: August 2006 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power directory will contain files that will provide a unified interface to the power management @@ -8,7 +8,7 @@ Description: What: /sys/power/state Date: August 2006 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/state file controls the system power state. Reading from this file returns what states are supported, @@ -22,7 +22,7 @@ Description: What: /sys/power/disk Date: September 2006 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/disk file controls the operating mode of the suspend-to-disk mechanism. Reading from this file returns @@ -67,7 +67,7 @@ Description: What: /sys/power/image_size Date: August 2006 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/image_size file controls the size of the image created by the suspend-to-disk mechanism. It can be written a @@ -84,7 +84,7 @@ Description: What: /sys/power/pm_trace Date: August 2006 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/pm_trace file controls the code which saves the last PM event point in the RTC across reboots, so that you can @@ -133,7 +133,7 @@ Description: What: /sys/power/pm_async Date: January 2009 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/pm_async file controls the switch allowing the user space to enable or disable asynchronous suspend and resume @@ -146,7 +146,7 @@ Description: What: /sys/power/wakeup_count Date: July 2010 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/wakeup_count file allows user space to put the system into a sleep state while taking into account the @@ -161,7 +161,7 @@ Description: What: /sys/power/reserved_size Date: May 2011 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/reserved_size file allows user space to control the amount of memory reserved for allocations made by device @@ -175,7 +175,7 @@ Description: What: /sys/power/autosleep Date: April 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/autosleep file can be written one of the strings returned by reads from /sys/power/state. If that happens, a @@ -192,7 +192,7 @@ Description: What: /sys/power/wake_lock Date: February 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/wake_lock file allows user space to create wakeup source objects and activate them on demand (if one of @@ -219,7 +219,7 @@ Description: What: /sys/power/wake_unlock Date: February 2012 -Contact: Rafael J. Wysocki <rjw@sisk.pl> +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> Description: The /sys/power/wake_unlock file allows user space to deactivate wakeup sources created with the help of /sys/power/wake_lock. diff --git a/Documentation/acpi/dsdt-override.txt b/Documentation/acpi/dsdt-override.txt index febbb1b..784841c 100644 --- a/Documentation/acpi/dsdt-override.txt +++ b/Documentation/acpi/dsdt-override.txt @@ -4,4 +4,4 @@ CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel. When to use this method is described in detail on the Linux/ACPI home page: -http://www.lesswatts.org/projects/acpi/overridingDSDT.php +https://01.org/linux-acpi/documentation/overriding-dsdt diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index d18ecd8..929d990 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -6,6 +6,8 @@ capability.txt - Generic Block Device Capability (/sys/block/<device>/capability) cfq-iosched.txt - CFQ IO scheduler tunables +cmdline-partition.txt + - how to specify block device partitions on kernel command line data-integrity.txt - Block data integrity deadline-iosched.txt diff --git a/Documentation/block/cmdline-partition.txt b/Documentation/block/cmdline-partition.txt index 2bbf4cc..525b9f6 100644 --- a/Documentation/block/cmdline-partition.txt +++ b/Documentation/block/cmdline-partition.txt @@ -1,9 +1,9 @@ -Embedded device command line partition +Embedded device command line partition parsing ===================================================================== -Read block device partition table from command line. -The partition used for fixed block device (eMMC) embedded device. -It is no MBR, save storage space. Bootloader can be easily accessed +Support for reading the block device partition table from the command line. +It is typically used for fixed block (eMMC) embedded devices. +It has no MBR, so saves storage space. Bootloader can be easily accessed by absolute address of data on the block device. Users can easily change the partition. diff --git a/Documentation/devicetree/bindings/memory.txt b/Documentation/devicetree/bindings/memory.txt deleted file mode 100644 index eb24693..0000000 --- a/Documentation/devicetree/bindings/memory.txt +++ /dev/null @@ -1,168 +0,0 @@ -*** Memory binding *** - -The /memory node provides basic information about the address and size -of the physical memory. This node is usually filled or updated by the -bootloader, depending on the actual memory configuration of the given -hardware. - -The memory layout is described by the following node: - -/ { - #address-cells = <(n)>; - #size-cells = <(m)>; - memory { - device_type = "memory"; - reg = <(baseaddr1) (size1) - (baseaddr2) (size2) - ... - (baseaddrN) (sizeN)>; - }; - ... -}; - -A memory node follows the typical device tree rules for "reg" property: -n: number of cells used to store base address value -m: number of cells used to store size value -baseaddrX: defines a base address of the defined memory bank -sizeX: the size of the defined memory bank - - -More than one memory bank can be defined. - - -*** Reserved memory regions *** - -In /memory/reserved-memory node one can create child nodes describing -particular reserved (excluded from normal use) memory regions. Such -memory regions are usually designed for the special usage by various -device drivers. A good example are contiguous memory allocations or -memory sharing with other operating system on the same hardware board. -Those special memory regions might depend on the board configuration and -devices used on the target system. - -Parameters for each memory region can be encoded into the device tree -with the following convention: - -[(label):] (name) { - compatible = "linux,contiguous-memory-region", "reserved-memory-region"; - reg = <(address) (size)>; - (linux,default-contiguous-region); -}; - -compatible: one or more of: - - "linux,contiguous-memory-region" - enables binding of this - region to Contiguous Memory Allocator (special region for - contiguous memory allocations, shared with movable system - memory, Linux kernel-specific). - - "reserved-memory-region" - compatibility is defined, given - region is assigned for exclusive usage for by the respective - devices. - -reg: standard property defining the base address and size of - the memory region - -linux,default-contiguous-region: property indicating that the region - is the default region for all contiguous memory - allocations, Linux specific (optional) - -It is optional to specify the base address, so if one wants to use -autoconfiguration of the base address, '0' can be specified as a base -address in the 'reg' property. - -The /memory/reserved-memory node must contain the same #address-cells -and #size-cells value as the root node. - - -*** Device node's properties *** - -Once regions in the /memory/reserved-memory node have been defined, they -may be referenced by other device nodes. Bindings that wish to reference -memory regions should explicitly document their use of the following -property: - -memory-region = <&phandle_to_defined_region>; - -This property indicates that the device driver should use the memory -region pointed by the given phandle. - - -*** Example *** - -This example defines a memory consisting of 4 memory banks. 3 contiguous -regions are defined for Linux kernel, one default of all device drivers -(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the -framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB) -and one for multimedia processing (labelled multimedia_mem, placed at -0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000 -device for DMA memory allocations (Linux kernel drivers will use CMA is -available or dma-exclusive usage otherwise). 'multimedia_mem' is -assigned to scaler@12500000 and codec@12600000 devices for contiguous -memory allocations when CMA driver is enabled. - -The reason for creating a separate region for framebuffer device is to -match the framebuffer base address to the one configured by bootloader, -so once Linux kernel drivers starts no glitches on the displayed boot -logo appears. Scaller and codec drivers should share the memory -allocations. - -/ { - #address-cells = <1>; - #size-cells = <1>; - - /* ... */ - - memory { - reg = <0x40000000 0x10000000 - 0x50000000 0x10000000 - 0x60000000 0x10000000 - 0x70000000 0x10000000>; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - - /* - * global autoconfigured region for contiguous allocations - * (used only with Contiguous Memory Allocator) - */ - contig_region@0 { - compatible = "linux,contiguous-memory-region"; - reg = <0x0 0x4000000>; - linux,default-contiguous-region; - }; - - /* - * special region for framebuffer - */ - display_region: region@78000000 { - compatible = "linux,contiguous-memory-region", "reserved-memory-region"; - reg = <0x78000000 0x800000>; - }; - - /* - * special region for multimedia processing devices - */ - multimedia_region: region@77000000 { - compatible = "linux,contiguous-memory-region"; - reg = <0x77000000 0x4000000>; - }; - }; - }; - - /* ... */ - - fb0: fb@12300000 { - status = "okay"; - memory-region = <&display_region>; - }; - - scaler: scaler@12500000 { - status = "okay"; - memory-region = <&multimedia_region>; - }; - - codec: codec@12600000 { - status = "okay"; - memory-region = <&multimedia_region>; - }; -}; diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index df204e1..6a2a116 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as described in mmc.txt, can be used. Additionally the following tmio_mmc-specific optional bindings can be used. +Required properties: +- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit + "renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC + "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC + "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC + "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC + "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC + "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC + "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC + Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable - -When used with Renesas SDHI hardware, the following compatibility strings -configure various model-specific properties: - -"renesas,sh7372-sdhi": (default) compatible with SH7372 -"renesas,r8a7740-sdhi": compatible with R8A7740: certain MMC/SD commands have to - wait for the interface to become idle. diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 2c6be03..d2ea460 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -86,6 +86,7 @@ General Properties: Clock Properties: + - fsl,cksel Timer reference clock source. - fsl,tclk-period Timer reference clock period in nanoseconds. - fsl,tmr-prsc Prescaler, divides the output clock. - fsl,tmr-add Frequency compensation value. @@ -97,7 +98,7 @@ Clock Properties: clock. You must choose these carefully for the clock to work right. Here is how to figure good values: - TimerOsc = system clock MHz + TimerOsc = selected reference clock MHz tclk_period = desired clock period nanoseconds NominalFreq = 1000 / tclk_period MHz FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) @@ -114,6 +115,20 @@ Clock Properties: Pulse Per Second (PPS) signal, since this will be offered to the PPS subsystem to synchronize the Linux clock. + Reference clock source is determined by the value, which is holded + in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the + value, which will be directly written in those bits, that is why, + according to reference manual, the next clock sources can be used: + + <0> - external high precision timer reference clock (TSEC_TMR_CLK + input is used for this purpose); + <1> - eTSEC system clock; + <2> - eTSEC1 transmit clock; + <3> - RTC clock input. + + When this attribute is not used, eTSEC system clock will serve as + IEEE 1588 timer reference clock. + Example: ptp_clock@24E00 { @@ -121,6 +136,7 @@ Example: reg = <0x24E00 0xB0>; interrupts = <12 0x8 13 0x8>; interrupt-parent = < &ipic >; + fsl,cksel = <1>; fsl,tclk-period = <10>; fsl,tmr-prsc = <100>; fsl,tmr-add = <0x999999A4>; diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt new file mode 100644 index 0000000..8ae844f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt @@ -0,0 +1,66 @@ +This document explains only the device tree data binding. For general +information about PHY subsystem refer to Documentation/phy.txt + +PHY device node +=============== + +Required Properties: +#phy-cells: Number of cells in a PHY specifier; The meaning of all those + cells is defined by the binding for the phy node. The PHY + provider can use the values in cells to find the appropriate + PHY. + +For example: + +phys: phy { + compatible = "xxx"; + reg = <...>; + . + . + #phy-cells = <1>; + . + . +}; + +That node describes an IP block (PHY provider) that implements 2 different PHYs. +In order to differentiate between these 2 PHYs, an additonal specifier should be +given while trying to get a reference to it. + +PHY user node +============= + +Required Properties: +phys : the phandle for the PHY device (used by the PHY subsystem) +phy-names : the names of the PHY corresponding to the PHYs present in the + *phys* phandle + +Example 1: +usb1: usb_otg_ss@xxx { + compatible = "xxx"; + reg = <xxx>; + . + . + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2phy", "usb3phy"; + . + . +}; + +This node represents a controller that uses two PHYs, one for usb2 and one for +usb3. + +Example 2: +usb2: usb_otg_ss@xxx { + compatible = "xxx"; + reg = <xxx>; + . + . + phys = <&phys 1>; + phy-names = "usbphy"; + . + . +}; + +This node represents a controller that uses one of the PHYs of the PHY provider +device defined previously. Note that the phy handle has an additional specifier +"1" to differentiate between the two PHYs. diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt new file mode 100644 index 0000000..c0fccaa --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -0,0 +1,22 @@ +Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY +------------------------------------------------- + +Required properties: +- compatible : should be "samsung,s5pv210-mipi-video-phy"; +- reg : offset and length of the MIPI DPHY register set; +- #phy-cells : from the generic phy bindings, must be 1; + +For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in +the PHY specifier identifies the PHY and its meaning is as follows: + 0 - MIPI CSIS 0, + 1 - MIPI DSIM 0, + 2 - MIPI CSIS 1, + 3 - MIPI DSIM 1. + +Samsung EXYNOS SoC series Display Port PHY +------------------------------------------------- + +Required properties: +- compatible : should be "samsung,exynos5250-dp-video-phy"; +- reg : offset and length of the Display Port PHY register set; +- #phy-cells : from the generic PHY bindings, must be 0; diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt new file mode 100644 index 0000000..5ea26c6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -0,0 +1,17 @@ +MSM SoC HSUSB controllers + +EHCI + +Required properties: +- compatible: Should contain "qcom,ehci-host" +- regs: offset and length of the register set in the memory map +- usb-phy: phandle for the PHY device + +Example EHCI controller device node: + + ehci: ehci@f9a55000 { + compatible = "qcom,ehci-host"; + reg = <0xf9a55000 0x400>; + usb-phy = <&usb_otg>; + }; + diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 9088ab0..090e5e2 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -3,9 +3,6 @@ OMAP GLUE AND OTHER OMAP SPECIFIC COMPONENTS OMAP MUSB GLUE - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb" - ti,hwmods : must be "usb_otg_hs" - - ti,has-mailbox : to specify that omap uses an external mailbox - (in control module) to communicate with the musb core during device connect - and disconnect. - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. - num-eps : Specifies the number of endpoints. This is also a @@ -19,6 +16,9 @@ OMAP MUSB GLUE - power : Should be "50". This signifies the controller can supply up to 100mA when operating in host mode. - usb-phy : the phandle for the PHY device + - phys : the phandle for the PHY device (used by generic PHY framework) + - phy-names : the names of the PHY corresponding to the PHYs present in the + *phy* phandle. Optional properties: - ctrl-module : phandle of the control module this glue uses to write to @@ -28,11 +28,12 @@ SOC specific device node entry usb_otg_hs: usb_otg_hs@4a0ab000 { compatible = "ti,omap4-musb"; ti,hwmods = "usb_otg_hs"; - ti,has-mailbox; multipoint = <1>; num-eps = <16>; ram-bits = <12>; ctrl-module = <&omap_control_usb>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; }; Board specific device node entry @@ -78,22 +79,22 @@ omap_dwc3 { OMAP CONTROL USB Required properties: - - compatible: Should be "ti,omap-control-usb" + - compatible: Should be one of + "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. + "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register + e.g. USB2_PHY on OMAP5. + "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control + e.g. USB3 PHY and SATA PHY on OMAP5. + "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on + DRA7 platform. - reg : Address and length of the register set for the device. It contains - the address of "control_dev_conf" and "otghs_control" or "phy_power_usb" - depending upon omap4 or omap5. - - reg-names: The names of the register addresses corresponding to the registers - filled in "reg". - - ti,type: This is used to differentiate whether the control module has - usb mailbox or usb3 phy power. omap4 has usb mailbox in control module to - notify events to the musb core and omap5 has usb3 phy power register to - power on usb3 phy. Should be "1" if it has mailbox and "2" if it has usb3 - phy power. + the address of "otghs_control" for control-phy-otghs or "power" register + for other types. + - reg-names: should be "otghs_control" control-phy-otghs and "power" for + other types. omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,omap-control-usb"; - reg = <0x4a002300 0x4>, - <0x4a00233c 0x4>; - reg-names = "control_dev_conf", "otghs_control"; - ti,type = <1>; + compatible = "ti,control-phy-otghs"; + reg = <0x4a00233c 0x4>; + reg-names = "otghs_control"; }; diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt index 61496f5..c0245c8 100644 --- a/Documentation/devicetree/bindings/usb/usb-phy.txt +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt @@ -5,6 +5,8 @@ OMAP USB2 PHY Required properties: - compatible: Should be "ti,omap-usb2" - reg : Address and length of the register set for the device. + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. Optional properties: - ctrl-module : phandle of the control module used by PHY driver to power on @@ -16,6 +18,7 @@ usb2phy@4a0ad080 { compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; ctrl-module = <&omap_control_usb>; + #phy-cells = <0>; }; OMAP USB3 PHY @@ -25,6 +28,8 @@ Required properties: - reg : Address and length of the register set for the device. - reg-names: The names of the register addresses corresponding to the registers filled in "reg". + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. Optional properties: - ctrl-module : phandle of the control module used by PHY driver to power on @@ -39,4 +44,5 @@ usb3phy@4a084400 { <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb>; + #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 84f10c1..3289d76 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -6,10 +6,10 @@ We use two nodes: -dptx-phy node(defined inside dp-controller node) For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: - -reg: +Required properties for dptx-phy: deprecated, use phys and phy-names + -reg: deprecated Base address of DP PHY register. - -samsung,enable-mask: + -samsung,enable-mask: deprecated The bit-mask used to enable/disable DP PHY. For the Panel initialization, we read data from dp-controller node. @@ -27,6 +27,10 @@ Required properties for dp-controller: from common clock binding: Shall be "dp". -interrupt-parent: phandle to Interrupt combiner node. + -phys: + from general PHY binding: the phandle for the PHY device. + -phy-names: + from general PHY binding: Should be "dp". -samsung,color-space: input video data format. COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 @@ -68,11 +72,8 @@ SOC specific portion: clocks = <&clock 342>; clock-names = "dp"; - dptx-phy { - reg = <0x10040720>; - samsung,enable-mask = <1>; - }; - + phys = <&dp_phy>; + phy-names = "dp"; }; Board Specific portion: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 539a236..fcbb736 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: <io>,<irq>,<mode> See header of drivers/net/hamradio/baycom_ser_hdx.c. + blkdevparts= Manual partition parsing of block device(s) for + embedded devices based on command line input. + See Documentation/block/cmdline-partition.txt + boot_delay= Milliseconds to delay each printk during boot. Values larger than 10 seconds (10000) are changed to no delay (0). @@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. pages. In the event, a node is too small to have both kernelcore and Movable pages, kernelcore pages will take priority and other nodes will have a larger number - of kernelcore pages. The Movable zone is used for the + of Movable pages. The Movable zone is used for the allocation of pages that may be reclaimed or moved by the page migration subsystem. This means that HugeTLB pages may not be allocated from this zone. diff --git a/Documentation/phy.txt b/Documentation/phy.txt new file mode 100644 index 0000000..0103e4b --- /dev/null +++ b/Documentation/phy.txt @@ -0,0 +1,166 @@ + PHY SUBSYSTEM + Kishon Vijay Abraham I <kishon@ti.com> + +This document explains the Generic PHY Framework along with the APIs provided, +and how-to-use. + +1. Introduction + +*PHY* is the abbreviation for physical layer. It is used to connect a device +to the physical medium e.g., the USB controller has a PHY to provide functions +such as serialization, de-serialization, encoding, decoding and is responsible +for obtaining the required data transmission rate. Note that some USB +controllers have PHY functionality embedded into it and others use an external +PHY. Other peripherals that use PHY include Wireless LAN, Ethernet, +SATA etc. + +The intention of creating this framework is to bring the PHY drivers spread +all over the Linux kernel to drivers/phy to increase code re-use and for +better code maintainability. + +This framework will be of use only to devices that use external PHY (PHY +functionality is not embedded within the controller). + +2. Registering/Unregistering the PHY provider + +PHY provider refers to an entity that implements one or more PHY instances. +For the simple case where the PHY provider implements only a single instance of +the PHY, the framework provides its own implementation of of_xlate in +of_phy_simple_xlate. If the PHY provider implements multiple instances, it +should provide its own implementation of of_xlate. of_xlate is used only for +dt boot case. + +#define of_phy_provider_register(dev, xlate) \ + __of_phy_provider_register((dev), THIS_MODULE, (xlate)) + +#define devm_of_phy_provider_register(dev, xlate) \ + __devm_of_phy_provider_register((dev), THIS_MODULE, (xlate)) + +of_phy_provider_register and devm_of_phy_provider_register macros can be used to +register the phy_provider and it takes device and of_xlate as +arguments. For the dt boot case, all PHY providers should use one of the above +2 macros to register the PHY provider. + +void devm_of_phy_provider_unregister(struct device *dev, + struct phy_provider *phy_provider); +void of_phy_provider_unregister(struct phy_provider *phy_provider); + +devm_of_phy_provider_unregister and of_phy_provider_unregister can be used to +unregister the PHY. + +3. Creating the PHY + +The PHY driver should create the PHY in order for other peripheral controllers +to make use of it. The PHY framework provides 2 APIs to create the PHY. + +struct phy *phy_create(struct device *dev, const struct phy_ops *ops, + struct phy_init_data *init_data); +struct phy *devm_phy_create(struct device *dev, const struct phy_ops *ops, + struct phy_init_data *init_data); + +The PHY drivers can use one of the above 2 APIs to create the PHY by passing +the device pointer, phy ops and init_data. +phy_ops is a set of function pointers for performing PHY operations such as +init, exit, power_on and power_off. *init_data* is mandatory to get a reference +to the PHY in the case of non-dt boot. See section *Board File Initialization* +on how init_data should be used. + +Inorder to dereference the private data (in phy_ops), the phy provider driver +can use phy_set_drvdata() after creating the PHY and use phy_get_drvdata() in +phy_ops to get back the private data. + +4. Getting a reference to the PHY + +Before the controller can make use of the PHY, it has to get a reference to +it. This framework provides the following APIs to get a reference to the PHY. + +struct phy *phy_get(struct device *dev, const char *string); +struct phy *devm_phy_get(struct device *dev, const char *string); + +phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot, +the string arguments should contain the phy name as given in the dt data and +in the case of non-dt boot, it should contain the label of the PHY. +The only difference between the two APIs is that devm_phy_get associates the +device with the PHY using devres on successful PHY get. On driver detach, +release function is invoked on the the devres data and devres data is freed. + +5. Releasing a reference to the PHY + +When the controller no longer needs the PHY, it has to release the reference +to the PHY it has obtained using the APIs mentioned in the above section. The +PHY framework provides 2 APIs to release a reference to the PHY. + +void phy_put(struct phy *phy); +void devm_phy_put(struct device *dev, struct phy *phy); + +Both these APIs are used to release a reference to the PHY and devm_phy_put +destroys the devres associated with this PHY. + +6. Destroying the PHY + +When the driver that created the PHY is unloaded, it should destroy the PHY it +created using one of the following 2 APIs. + +void phy_destroy(struct phy *phy); +void devm_phy_destroy(struct device *dev, struct phy *phy); + +Both these APIs destroy the PHY and devm_phy_destroy destroys the devres +associated with this PHY. + +7. PM Runtime + +This subsystem is pm runtime enabled. So while creating the PHY, +pm_runtime_enable of the phy device created by this subsystem is called and +while destroying the PHY, pm_runtime_disable is called. Note that the phy +device created by this subsystem will be a child of the device that calls +phy_create (PHY provider device). + +So pm_runtime_get_sync of the phy_device created by this subsystem will invoke +pm_runtime_get_sync of PHY provider device because of parent-child relationship. +It should also be noted that phy_power_on and phy_power_off performs +phy_pm_runtime_get_sync and phy_pm_runtime_put respectively. +There are exported APIs like phy_pm_runtime_get, phy_pm_runtime_get_sync, +phy_pm_runtime_put, phy_pm_runtime_put_sync, phy_pm_runtime_allow and +phy_pm_runtime_forbid for performing PM operations. + +8. Board File Initialization + +Certain board file initialization is necessary in order to get a reference +to the PHY in the case of non-dt boot. +Say we have a single device that implements 3 PHYs that of USB, SATA and PCIe, +then in the board file the following initialization should be done. + +struct phy_consumer consumers[] = { + PHY_CONSUMER("dwc3.0", "usb"), + PHY_CONSUMER("pcie.0", "pcie"), + PHY_CONSUMER("sata.0", "sata"), +}; +PHY_CONSUMER takes 2 parameters, first is the device name of the controller +(PHY consumer) and second is the port name. + +struct phy_init_data init_data = { + .consumers = consumers, + .num_consumers = ARRAY_SIZE(consumers), +}; + +static const struct platform_device pipe3_phy_dev = { + .name = "pipe3-phy", + .id = -1, + .dev = { + .platform_data = { + .init_data = &init_data, + }, + }, +}; + +then, while doing phy_create, the PHY driver should pass this init_data + phy_create(dev, ops, pdata->init_data); + +and the controller driver (phy consumer) should pass the port name along with +the device to get a reference to the PHY + phy_get(dev, "pcie"); + +9. DeviceTree Binding + +The documentation for PHY dt binding can be found @ +Documentation/devicetree/bindings/phy/phy-bindings.txt diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt index d35dcdd..c03b1be 100644 --- a/Documentation/pps/pps.txt +++ b/Documentation/pps/pps.txt @@ -66,6 +66,21 @@ In LinuxPPS the PPS sources are simply char devices usually mapped into files /dev/pps0, /dev/pps1, etc.. +PPS with USB to serial devices +------------------------------ + +It is possible to grab the PPS from an USB to serial device. However, +you should take into account the latencies and jitter introduced by +the USB stack. Users has reported clock instability around +-1ms when +synchronized with PPS through USB. This isn't suited for time server +synchronization. + +If your device doesn't report PPS, you can check that the feature is +supported by its driver. Most of the time, you only need to add a call +to usb_serial_handle_dcd_change after checking the DCD status (see +ch341 and pl2303 examples). + + Coding example -------------- diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index f911e36..85c362d 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -28,6 +28,7 @@ ALC269/270/275/276/28x/29x alc269-dmic Enable ALC269(VA) digital mic workaround alc271-dmic Enable ALC271X digital mic workaround inv-dmic Inverted internal mic workaround + headset-mic Indicates a combined headset (headphone+mic) jack lenovo-dock Enables docking station I/O for some Lenovos dell-headset-multi Headset jack, which can also be used as mic-in dell-headset-dock Headset jack (without mic-in), and also dock I/O |