summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/videobook.tmpl9
-rw-r--r--Documentation/RCU/RTFP.txt210
-rw-r--r--Documentation/RCU/rcu.txt19
-rw-r--r--Documentation/RCU/torture.txt11
-rw-r--r--Documentation/cpu-hotplug.txt11
-rw-r--r--Documentation/dvb/bt8xx.txt12
-rw-r--r--Documentation/video4linux/CARDLIST.cx238854
-rw-r--r--Documentation/video4linux/CARDLIST.cx881
-rw-r--r--Documentation/video4linux/CARDLIST.em28xx17
-rw-r--r--Documentation/video4linux/CARDLIST.ivtv6
-rw-r--r--Documentation/video4linux/CARDLIST.saa713417
-rw-r--r--Documentation/video4linux/CARDLIST.tuner5
-rw-r--r--Documentation/video4linux/CARDLIST.usbvision1
-rw-r--r--Documentation/video4linux/extract_xc3028.pl926
-rw-r--r--Documentation/video4linux/sn9c102.txt1
15 files changed, 1205 insertions, 45 deletions
diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl
index b629da3..b3d93ee 100644
--- a/Documentation/DocBook/videobook.tmpl
+++ b/Documentation/DocBook/videobook.tmpl
@@ -96,7 +96,6 @@ static struct video_device my_radio
{
"My radio",
VID_TYPE_TUNER,
- VID_HARDWARE_MYRADIO,
radio_open.
radio_close,
NULL, /* no read */
@@ -119,13 +118,6 @@ static struct video_device my_radio
way to change channel so it is tuneable.
</para>
<para>
- The VID_HARDWARE_ types are unique to each device. Numbers are assigned by
- <email>alan@redhat.com</email> when device drivers are going to be released. Until then you
- can pull a suitably large number out of your hat and use it. 10000 should be
- safe for a very long time even allowing for the huge number of vendors
- making new and different radio cards at the moment.
- </para>
- <para>
We declare an open and close routine, but we do not need read or write,
which are used to read and write video data to or from the card itself. As
we have no read or write there is no poll function.
@@ -844,7 +836,6 @@ static struct video_device my_camera
"My Camera",
VID_TYPE_OVERLAY|VID_TYPE_SCALES|\
VID_TYPE_CAPTURE|VID_TYPE_CHROMAKEY,
- VID_HARDWARE_MYCAMERA,
camera_open.
camera_close,
camera_read, /* no read */
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
index 6221464..39ad8f5 100644
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -9,8 +9,8 @@ The first thing resembling RCU was published in 1980, when Kung and Lehman
[Kung80] recommended use of a garbage collector to defer destruction
of nodes in a parallel binary search tree in order to simplify its
implementation. This works well in environments that have garbage
-collectors, but current production garbage collectors incur significant
-read-side overhead.
+collectors, but most production garbage collectors incur significant
+overhead.
In 1982, Manber and Ladner [Manber82,Manber84] recommended deferring
destruction until all threads running at that time have terminated, again
@@ -99,16 +99,25 @@ locking, reduces contention, reduces memory latency for readers, and
parallelizes pipeline stalls and memory latency for writers. However,
these techniques still impose significant read-side overhead in the
form of memory barriers. Researchers at Sun worked along similar lines
-in the same timeframe [HerlihyLM02,HerlihyLMS03]. These techniques
-can be thought of as inside-out reference counts, where the count is
-represented by the number of hazard pointers referencing a given data
-structure (rather than the more conventional counter field within the
-data structure itself).
+in the same timeframe [HerlihyLM02]. These techniques can be thought
+of as inside-out reference counts, where the count is represented by the
+number of hazard pointers referencing a given data structure (rather than
+the more conventional counter field within the data structure itself).
+
+By the same token, RCU can be thought of as a "bulk reference count",
+where some form of reference counter covers all reference by a given CPU
+or thread during a set timeframe. This timeframe is related to, but
+not necessarily exactly the same as, an RCU grace period. In classic
+RCU, the reference counter is the per-CPU bit in the "bitmask" field,
+and each such bit covers all references that might have been made by
+the corresponding CPU during the prior grace period. Of course, RCU
+can be thought of in other terms as well.
In 2003, the K42 group described how RCU could be used to create
-hot-pluggable implementations of operating-system functions. Later that
-year saw a paper describing an RCU implementation of System V IPC
-[Arcangeli03], and an introduction to RCU in Linux Journal [McKenney03a].
+hot-pluggable implementations of operating-system functions [Appavoo03a].
+Later that year saw a paper describing an RCU implementation of System
+V IPC [Arcangeli03], and an introduction to RCU in Linux Journal
+[McKenney03a].
2004 has seen a Linux-Journal article on use of RCU in dcache
[McKenney04a], a performance comparison of locking to RCU on several
@@ -117,10 +126,19 @@ number of operating-system kernels [PaulEdwardMcKenneyPhD], a paper
describing how to make RCU safe for soft-realtime applications [Sarma04c],
and a paper describing SELinux performance with RCU [JamesMorris04b].
-2005 has seen further adaptation of RCU to realtime use, permitting
+2005 brought further adaptation of RCU to realtime use, permitting
preemption of RCU realtime critical sections [PaulMcKenney05a,
PaulMcKenney05b].
+2006 saw the first best-paper award for an RCU paper [ThomasEHart2006a],
+as well as further work on efficient implementations of preemptible
+RCU [PaulEMcKenney2006b], but priority-boosting of RCU read-side critical
+sections proved elusive. An RCU implementation permitting general
+blocking in read-side critical sections appeared [PaulEMcKenney2006c],
+Robert Olsson described an RCU-protected trie-hash combination
+[RobertOlsson2006a].
+
+
Bibtex Entries
@article{Kung80
@@ -203,6 +221,41 @@ Bibtex Entries
,Address="New Orleans, LA"
}
+@conference{Pu95a,
+Author = "Calton Pu and Tito Autrey and Andrew Black and Charles Consel and
+Crispin Cowan and Jon Inouye and Lakshmi Kethana and Jonathan Walpole and
+Ke Zhang",
+Title = "Optimistic Incremental Specialization: Streamlining a Commercial
+Operating System",
+Booktitle = "15\textsuperscript{th} ACM Symposium on
+Operating Systems Principles (SOSP'95)",
+address = "Copper Mountain, CO",
+month="December",
+year="1995",
+pages="314-321",
+annotation="
+ Uses a replugger, but with a flag to signal when people are
+ using the resource at hand. Only one reader at a time.
+"
+}
+
+@conference{Cowan96a,
+Author = "Crispin Cowan and Tito Autrey and Charles Krasic and
+Calton Pu and Jonathan Walpole",
+Title = "Fast Concurrent Dynamic Linking for an Adaptive Operating System",
+Booktitle = "International Conference on Configurable Distributed Systems
+(ICCDS'96)",
+address = "Annapolis, MD",
+month="May",
+year="1996",
+pages="108",
+isbn="0-8186-7395-8",
+annotation="
+ Uses a replugger, but with a counter to signal when people are
+ using the resource at hand. Allows multiple readers.
+"
+}
+
@techreport{Slingwine95
,author="John D. Slingwine and Paul E. McKenney"
,title="Apparatus and Method for Achieving Reduced Overhead Mutual
@@ -312,6 +365,49 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell"
[Viewed June 23, 2004]"
}
+@conference{Michael02a
+,author="Maged M. Michael"
+,title="Safe Memory Reclamation for Dynamic Lock-Free Objects Using Atomic
+Reads and Writes"
+,Year="2002"
+,Month="August"
+,booktitle="{Proceedings of the 21\textsuperscript{st} Annual ACM
+Symposium on Principles of Distributed Computing}"
+,pages="21-30"
+,annotation="
+ Each thread keeps an array of pointers to items that it is
+ currently referencing. Sort of an inside-out garbage collection
+ mechanism, but one that requires the accessing code to explicitly
+ state its needs. Also requires read-side memory barriers on
+ most architectures.
+"
+}
+
+@conference{Michael02b
+,author="Maged M. Michael"
+,title="High Performance Dynamic Lock-Free Hash Tables and List-Based Sets"
+,Year="2002"
+,Month="August"
+,booktitle="{Proceedings of the 14\textsuperscript{th} Annual ACM
+Symposium on Parallel
+Algorithms and Architecture}"
+,pages="73-82"
+,annotation="
+ Like the title says...
+"
+}
+
+@InProceedings{HerlihyLM02
+,author={Maurice Herlihy and Victor Luchangco and Mark Moir}
+,title="The Repeat Offender Problem: A Mechanism for Supporting Dynamic-Sized,
+Lock-Free Data Structures"
+,booktitle={Proceedings of 16\textsuperscript{th} International
+Symposium on Distributed Computing}
+,year=2002
+,month="October"
+,pages="339-353"
+}
+
@article{Appavoo03a
,author="J. Appavoo and K. Hui and C. A. N. Soules and R. W. Wisniewski and
D. M. {Da Silva} and O. Krieger and M. A. Auslander and D. J. Edelsohn and
@@ -447,3 +543,95 @@ Oregon Health and Sciences University"
Realtime turns into making RCU yet more realtime friendly.
"
}
+
+@conference{ThomasEHart2006a
+,Author="Thomas E. Hart and Paul E. McKenney and Angela Demke Brown"
+,Title="Making Lockless Synchronization Fast: Performance Implications
+of Memory Reclamation"
+,Booktitle="20\textsuperscript{th} {IEEE} International Parallel and
+Distributed Processing Symposium"
+,month="April"
+,year="2006"
+,day="25-29"
+,address="Rhodes, Greece"
+,annotation="
+ Compares QSBR (AKA "classic RCU"), HPBR, EBR, and lock-free
+ reference counting.
+"
+}
+
+@Conference{PaulEMcKenney2006b
+,Author="Paul E. McKenney and Dipankar Sarma and Ingo Molnar and
+Suparna Bhattacharya"
+,Title="Extending RCU for Realtime and Embedded Workloads"
+,Booktitle="{Ottawa Linux Symposium}"
+,Month="July"
+,Year="2006"
+,pages="v2 123-138"
+,note="Available:
+\url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184}
+\url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf}
+[Viewed January 1, 2007]"
+,annotation="
+ Described how to improve the -rt implementation of realtime RCU.
+"
+}
+
+@unpublished{PaulEMcKenney2006c
+,Author="Paul E. McKenney"
+,Title="Sleepable {RCU}"
+,month="October"
+,day="9"
+,year="2006"
+,note="Available:
+\url{http://lwn.net/Articles/202847/}
+Revised:
+\url{http://www.rdrop.com/users/paulmck/RCU/srcu.2007.01.14a.pdf}
+[Viewed August 21, 2006]"
+,annotation="
+ LWN article introducing SRCU.
+"
+}
+
+@unpublished{RobertOlsson2006a
+,Author="Robert Olsson and Stefan Nilsson"
+,Title="{TRASH}: A dynamic {LC}-trie and hash data structure"
+,month="August"
+,day="18"
+,year="2006"
+,note="Available:
+\url{http://www.nada.kth.se/~snilsson/public/papers/trash/trash.pdf}
+[Viewed February 24, 2007]"
+,annotation="
+ RCU-protected dynamic trie-hash combination.
+"
+}
+
+@unpublished{ThomasEHart2007a
+,Author="Thomas E. Hart and Paul E. McKenney and Angela Demke Brown and Jonathan Walpole"
+,Title="Performance of memory reclamation for lockless synchronization"
+,journal="J. Parallel Distrib. Comput."
+,year="2007"
+,note="To appear in J. Parallel Distrib. Comput.
+ \url{doi=10.1016/j.jpdc.2007.04.010}"
+,annotation={
+ Compares QSBR (AKA "classic RCU"), HPBR, EBR, and lock-free
+ reference counting. Journal version of ThomasEHart2006a.
+}
+}
+
+@unpublished{PaulEMcKenney2007QRCUspin
+,Author="Paul E. McKenney"
+,Title="Using Promela and Spin to verify parallel algorithms"
+,month="August"
+,day="1"
+,year="2007"
+,note="Available:
+\url{http://lwn.net/Articles/243851/}
+[Viewed September 8, 2007]"
+,annotation="
+ LWN article describing Promela and spin, and also using Oleg
+ Nesterov's QRCU as an example (with Paul McKenney's fastpath).
+"
+}
+
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index f84407c..95821a2 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -36,6 +36,14 @@ o How can the updater tell when a grace period has completed
executed in user mode, or executed in the idle loop, we can
safely free up that item.
+ Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
+ same effect, but require that the readers manipulate CPU-local
+ counters. These counters allow limited types of blocking
+ within RCU read-side critical sections. SRCU also uses
+ CPU-local counters, and permits general blocking within
+ RCU read-side critical sections. These two variants of
+ RCU detect grace periods by sampling these counters.
+
o If I am running on a uniprocessor kernel, which can only do one
thing at a time, why should I wait for a grace period?
@@ -46,7 +54,10 @@ o How can I see where RCU is currently used in the Linux kernel?
Search for "rcu_read_lock", "rcu_read_unlock", "call_rcu",
"rcu_read_lock_bh", "rcu_read_unlock_bh", "call_rcu_bh",
"srcu_read_lock", "srcu_read_unlock", "synchronize_rcu",
- "synchronize_net", and "synchronize_srcu".
+ "synchronize_net", "synchronize_srcu", and the other RCU
+ primitives. Or grab one of the cscope databases from:
+
+ http://www.rdrop.com/users/paulmck/RCU/linuxusage/rculocktab.html
o What guidelines should I follow when writing code that uses RCU?
@@ -67,7 +78,11 @@ o I hear that RCU is patented? What is with that?
o I hear that RCU needs work in order to support realtime kernels?
- Yes, work in progress.
+ This work is largely completed. Realtime-friendly RCU can be
+ enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter.
+ However, work is in progress for enabling priority boosting of
+ preempted RCU read-side critical sections.This is needed if you
+ have CPU-bound realtime threads.
o Where can I find more information on RCU?
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
index 25a3c3f..2967a65 100644
--- a/Documentation/RCU/torture.txt
+++ b/Documentation/RCU/torture.txt
@@ -46,12 +46,13 @@ stat_interval The number of seconds between output of torture
shuffle_interval
The number of seconds to keep the test threads affinitied
- to a particular subset of the CPUs. Used in conjunction
- with test_no_idle_hz.
+ to a particular subset of the CPUs, defaults to 5 seconds.
+ Used in conjunction with test_no_idle_hz.
test_no_idle_hz Whether or not to test the ability of RCU to operate in
a kernel that disables the scheduling-clock interrupt to
idle CPUs. Boolean parameter, "1" to test, "0" otherwise.
+ Defaults to omitting this test.
torture_type The type of RCU to test: "rcu" for the rcu_read_lock() API,
"rcu_sync" for rcu_read_lock() with synchronous reclamation,
@@ -82,8 +83,6 @@ be evident. ;-)
The entries are as follows:
-o "ggp": The number of counter flips (or batches) since boot.
-
o "rtc": The hexadecimal address of the structure currently visible
to readers.
@@ -117,8 +116,8 @@ o "Reader Pipe": Histogram of "ages" of structures seen by readers.
o "Reader Batch": Another histogram of "ages" of structures seen
by readers, but in terms of counter flips (or batches) rather
than in terms of grace periods. The legal number of non-zero
- entries is again two. The reason for this separate view is
- that it is easier to get the third entry to show up in the
+ entries is again two. The reason for this separate view is that
+ it is sometimes easier to get the third entry to show up in the
"Reader Batch" list than in the "Reader Pipe" list.
o "Free-Block Circulation": Shows the number of torture structures
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index a741f65..fb94f5a 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -109,12 +109,13 @@ Never use anything other than cpumask_t to represent bitmap of CPUs.
for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask.
#include <linux/cpu.h>
- lock_cpu_hotplug() and unlock_cpu_hotplug():
+ get_online_cpus() and put_online_cpus():
-The above calls are used to inhibit cpu hotplug operations. While holding the
-cpucontrol mutex, cpu_online_map will not change. If you merely need to avoid
-cpus going away, you could also use preempt_disable() and preempt_enable()
-for those sections. Just remember the critical section cannot call any
+The above calls are used to inhibit cpu hotplug operations. While the
+cpu_hotplug.refcount is non zero, the cpu_online_map will not change.
+If you merely need to avoid cpus going away, you could also use
+preempt_disable() and preempt_enable() for those sections.
+Just remember the critical section cannot call any
function that can sleep or schedule this process away. The preempt_disable()
will work as long as stop_machine_run() is used to take a cpu down.
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index ecb47ad..b7b1d1b 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -78,6 +78,18 @@ Example:
For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org.
+2c) Probing the cards with broken PCI subsystem ID
+--------------------------------------------------
+There are some TwinHan cards that the EEPROM has become corrupted for some
+reason. The cards do not have correct PCI subsystem ID. But we can force
+probing the cards with broken PCI subsystem ID
+
+ $ echo 109e 0878 $subvendor $subdevice > \
+ /sys/bus/pci/drivers/bt878/new_id
+
+109e: PCI_VENDOR_ID_BROOKTREE
+0878: PCI_DEVICE_ID_BROOKTREE_878
+
Authors: Richard Walker,
Jamie Honan,
Michael Hunold,
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 00cb646..0924e6e 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -1,5 +1,7 @@
0 -> UNKNOWN/GENERIC [0070:3400]
1 -> Hauppauge WinTV-HVR1800lp [0070:7600]
- 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801]
+ 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801,0070:7809]
3 -> Hauppauge WinTV-HVR1250 [0070:7911]
4 -> DViCO FusionHDTV5 Express [18ac:d500]
+ 5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797]
+ 6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 82ac825..bc5593b 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -56,3 +56,4 @@
55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980]
56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602]
57 -> ADS Tech Instant Video PCI [1421:0390]
+ 58 -> Pinnacle PCTV HD 800i [11bd:0051]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 37f0e3c..6a8469f 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,14 +1,17 @@
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
- 1 -> Unknown EM2820/2840 video grabber (em2820/em2840)
+ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
- 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200]
- 5 -> MSI VOX USB 2.0 (em2820/em2840) [eb1a:2820]
+ 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
+ 5 -> MSI VOX USB 2.0 (em2820/em2840)
6 -> Terratec Cinergy 200 USB (em2800)
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
- 9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]
- 10 -> Hauppauge WinTV HVR 900 (em2880)
- 11 -> Terratec Hybrid XS (em2880)
+ 9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a]
+ 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500]
+ 11 -> Terratec Hybrid XS (em2880) [0ccd:0042]
12 -> Kworld PVR TV 2800 RF (em2820/em2840)
- 13 -> Terratec Prodigy XS (em2880)
+ 13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
+ 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
+ 15 -> V-Gear PocketTV (em2800)
+ 16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513]
diff --git a/Documentation/video4linux/CARDLIST.ivtv b/Documentation/video4linux/CARDLIST.ivtv
index ddd76a0..a019e27 100644
--- a/Documentation/video4linux/CARDLIST.ivtv
+++ b/Documentation/video4linux/CARDLIST.ivtv
@@ -16,3 +16,9 @@
16 -> GOTVIEW PCI DVD2 Deluxe [ffac:0600]
17 -> Yuan MPC622 [ff01:d998]
18 -> Digital Cowboy DCT-MTVP1 [1461:bfff]
+19 -> Yuan PG600V2/GotView PCI DVD Lite [ffab:0600,ffad:0600]
+20 -> Club3D ZAP-TV1x01 [ffab:0600]
+21 -> AverTV MCE 116 Plus [1461:c439]
+22 -> ASUS Falcon2 [1043:4b66,1043:462e,1043:4b2e]
+23 -> AverMedia PVR-150 Plus [1461:c035]
+24 -> AverMedia EZMaker PCI Deluxe [1461:c03f]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index a145453..5d3b6b4 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -80,7 +80,7 @@
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
81 -> Philips Tiger reference design [1131:2018]
- 82 -> MSI TV@Anywhere plus [1462:6231]
+ 82 -> MSI TV@Anywhere plus [1462:6231,1462:8624]
83 -> Terratec Cinergy 250 PCI TV [153b:1160]
84 -> LifeView FlyDVB Trio [5168:0319]
85 -> AverTV DVB-T 777 [1461:2c05,1461:2c05]
@@ -102,7 +102,7 @@
101 -> Pinnacle PCTV 310i [11bd:002f]
102 -> Avermedia AVerTV Studio 507 [1461:9715]
103 -> Compro Videomate DVB-T200A
-104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid [0070:6701]
+104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid [0070:6700,0070:6701,0070:6702,0070:6703,0070:6704,0070:6705]
105 -> Terratec Cinergy HT PCMCIA [153b:1172]
106 -> Encore ENLTV [1131:2342,1131:2341,3016:2344]
107 -> Encore ENLTV-FM [1131:230f]
@@ -116,3 +116,16 @@
115 -> Sabrent PCMCIA TV-PCB05 [0919:2003]
116 -> 10MOONS TM300 TV Card [1131:2304]
117 -> Avermedia Super 007 [1461:f01d]
+118 -> Beholder BeholdTV 401 [0000:4016]
+119 -> Beholder BeholdTV 403 [0000:4036]
+120 -> Beholder BeholdTV 403 FM [0000:4037]
+121 -> Beholder BeholdTV 405 [0000:4050]
+122 -> Beholder BeholdTV 405 FM [0000:4051]
+123 -> Beholder BeholdTV 407 [0000:4070]
+124 -> Beholder BeholdTV 407 FM [0000:4071]
+125 -> Beholder BeholdTV 409 [0000:4090]
+126 -> Beholder BeholdTV 505 FM/RDS [0000:5051,0000:505B,5ace:5050]
+127 -> Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [0000:5071,0000:507B,5ace:5070,5ace:5090]
+128 -> Beholder BeholdTV Columbus TVFM [0000:5201]
+129 -> Beholder BeholdTV 607 / BeholdTV 609 [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
+130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index a88c02d..0e23946 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -52,7 +52,7 @@ tuner=50 - TCL 2002N
tuner=51 - Philips PAL/SECAM_D (FM 1256 I-H3)
tuner=52 - Thomson DTT 7610 (ATSC/NTSC)
tuner=53 - Philips FQ1286
-tuner=54 - tda8290+75
+tuner=54 - Philips/NXP TDA 8290/8295 + 8275/8275A/18271
tuner=55 - TCL 2002MB
tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
tuner=57 - Philips FQ1236A MK4
@@ -69,7 +69,8 @@ tuner=67 - Philips TD1316 Hybrid Tuner
tuner=68 - Philips TUV1236D ATSC/NTSC dual in
tuner=69 - Tena TNF 5335 and similar models
tuner=70 - Samsung TCPN 2121P30A
-tuner=71 - Xceive xc3028
+tuner=71 - Xceive xc2028/xc3028 tuner
tuner=72 - Thomson FE6600
tuner=73 - Samsung TCPG 6121P30A
tuner=75 - Philips TEA5761 FM Radio
+tuner=76 - Xceive 5000 tuner
diff --git a/Documentation/video4linux/CARDLIST.usbvision b/Documentation/video4linux/CARDLIST.usbvision
index 3d6850e..0b72d3f 100644
--- a/Documentation/video4linux/CARDLIST.usbvision
+++ b/Documentation/video4linux/CARDLIST.usbvision
@@ -62,3 +62,4 @@
61 -> Pinnacle Studio Linx Video input cable (PAL) [2304:0301]
62 -> Pinnacle PCTV Bungee USB (PAL) FM [2304:0419]
63 -> Hauppauge WinTv-USB [2400:4200]
+ 64 -> Pinnacle Studio PCTV USB (NTSC) FM V3 [2304:0113]
diff --git a/Documentation/video4linux/extract_xc3028.pl b/Documentation/video4linux/extract_xc3028.pl
new file mode 100644
index 0000000..cced8ac
--- /dev/null
+++ b/Documentation/video4linux/extract_xc3028.pl
@@ -0,0 +1,926 @@
+#!/usr/bin/perl
+
+# Copyright (c) Mauro Carvalho Chehab <mchehab@infradead.org>
+# Released under GPLv2
+#
+# In order to use, you need to:
+# 1) Download the windows driver with something like:
+# wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
+# 2) Extract the file hcw85bda.sys from the zip into the current dir:
+# unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
+# 3) run the script:
+# ./extract_xc3028.pl
+# 4) copy the generated file:
+# cp xc3028-v27.fw /lib/firmware
+
+#use strict;
+use IO::Handle;
+
+my $debug=0;
+
+sub verify ($$)
+{
+ my ($filename, $hash) = @_;
+ my ($testhash);
+
+ if (system("which md5sum > /dev/null 2>&1")) {
+ die "This firmware requires the md5sum command - see http://www.gnu.org/software/coreutils/\n";
+ }
+
+ open(CMD, "md5sum ".$filename."|");
+ $testhash = <CMD>;
+ $testhash =~ /([a-zA-Z0-9]*)/;
+ $testhash = $1;
+ close CMD;
+ die "Hash of extracted file does not match (found $testhash, expected $hash!\n" if ($testhash ne $hash);
+}
+
+sub get_hunk ($$)
+{
+ my ($offset, $length) = @_;
+ my ($chunklength, $buf, $rcount, $out);
+
+ sysseek(INFILE, $offset, SEEK_SET);
+ while ($length > 0) {
+ # Calc chunk size
+ $chunklength = 2048;
+ $chunklength = $length if ($chunklength > $length);
+
+ $rcount = sysread(INFILE, $buf, $chunklength);
+ die "Ran out of data\n" if ($rcount != $chunklength);
+ $out .= $buf;
+ $length -= $rcount;
+ }
+ return $out;
+}
+
+sub write_le16($)
+{
+ my $val = shift;
+ my $msb = ($val >> 8) &0xff;
+ my $lsb = $val & 0xff;
+
+ syswrite(OUTFILE, chr($lsb).chr($msb));
+}
+
+sub write_le32($)
+{
+ my $val = shift;
+ my $l3 = ($val >> 24) & 0xff;
+ my $l2 = ($val >> 16) & 0xff;
+ my $l1 = ($val >> 8) & 0xff;
+ my $l0 = $val & 0xff;
+
+ syswrite(OUTFILE, chr($l0).chr($l1).chr($l2).chr($l3));
+}
+
+sub write_le64($$)
+{
+ my $msb_val = shift;
+ my $lsb_val = shift;
+ my $l7 = ($msb_val >> 24) & 0xff;
+ my $l6 = ($msb_val >> 16) & 0xff;
+ my $l5 = ($msb_val >> 8) & 0xff;
+ my $l4 = $msb_val & 0xff;
+
+ my $l3 = ($lsb_val >> 24) & 0xff;
+ my $l2 = ($lsb_val >> 16) & 0xff;
+ my $l1 = ($lsb_val >> 8) & 0xff;
+ my $l0 = $lsb_val & 0xff;
+
+ syswrite(OUTFILE,
+ chr($l0).chr($l1).chr($l2).chr($l3).
+ chr($l4).chr($l5).chr($l6).chr($l7));
+}
+
+sub write_hunk($$)
+{
+ my ($offset, $length) = @_;
+ my $out = get_hunk($offset, $length);
+
+ printf "(len %d) ",$length if ($debug);
+
+ for (my $i=0;$i<$length;$i++) {
+ printf "%02x ",ord(substr($out,$i,1)) if ($debug);
+ }
+ printf "\n" if ($debug);
+
+ syswrite(OUTFILE, $out);
+}
+
+sub write_hunk_fix_endian($$)
+{
+ my ($offset, $length) = @_;
+ my $out = get_hunk($offset, $length);
+
+ printf "(len_fix %d) ",$length if ($debug);
+
+ for (my $i=0;$i<$length;$i++) {
+ printf "%02x ",ord(substr($out,$i,1)) if ($debug);
+ }
+ printf "\n" if ($debug);
+
+ my $i=0;
+ while ($i<$length) {
+ my $size = ord(substr($out,$i,1))*256+ord(substr($out,$i+1,1));
+ syswrite(OUTFILE, substr($out,$i+1,1));
+ syswrite(OUTFILE, substr($out,$i,1));
+ $i+=2;
+ if ($size>0 && $size <0x8000) {
+ for (my $j=0;$j<$size;$j++) {
+ syswrite(OUTFILE, substr($out,$j+$i,1));
+ }
+ $i+=$size;
+ }
+ }
+}
+
+sub main_firmware($$$$)
+{
+ my $out;
+ my $j=0;
+ my $outfile = shift;
+ my $name = shift;
+ my $version = shift;
+ my $nr_desc = shift;
+
+ for ($j = length($name); $j <32; $j++) {
+ $name = $name.chr(0);
+}
+
+ open OUTFILE, ">$outfile";
+ syswrite(OUTFILE, $name);
+ write_le16($version);
+ write_le16($nr_desc);
+
+ #
+ # Firmware 0, type: BASE FW F8MHZ (0x00000003), id: (0000000000000000), size: 8718
+ #
+
+ write_le32(0x00000003); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(8718); # Size
+ write_hunk_fix_endian(813432, 8718);
+
+ #
+ # Firmware 1, type: BASE FW F8MHZ MTS (0x00000007), id: (0000000000000000), size: 8712
+ #
+
+ write_le32(0x00000007); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(8712); # Size
+ write_hunk_fix_endian(822152, 8712);
+
+ #
+ # Firmware 2, type: BASE FW FM (0x00000401), id: (0000000000000000), size: 8562
+ #
+
+ write_le32(0x00000401); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(8562); # Size
+ write_hunk_fix_endian(830872, 8562);
+
+ #
+ # Firmware 3, type: BASE FW FM INPUT1 (0x00000c01), id: (0000000000000000), size: 8576
+ #
+
+ write_le32(0x00000c01); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(8576); # Size
+ write_hunk_fix_endian(839440, 8576);
+
+ #
+ # Firmware 4, type: BASE FW (0x00000001), id: (0000000000000000), size: 8706
+ #
+
+ write_le32(0x00000001); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(8706); # Size
+ write_hunk_fix_endian(848024, 8706);
+
+ #
+ # Firmware 5, type: BASE FW MTS (0x00000005), id: (0000000000000000), size: 8682
+ #
+
+ write_le32(0x00000005); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(8682); # Size
+ write_hunk_fix_endian(856736, 8682);
+
+ #
+ # Firmware 6, type: STD FW (0x00000000), id: PAL/BG A2/A (0000000100000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000001, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(865424, 161);
+
+ #
+ # Firmware 7, type: STD FW MTS (0x00000004), id: PAL/BG A2/A (0000000100000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000001, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(865592, 169);
+
+ #
+ # Firmware 8, type: STD FW (0x00000000), id: PAL/BG A2/B (0000000200000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000002, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(865424, 161);
+
+ #
+ # Firmware 9, type: STD FW MTS (0x00000004), id: PAL/BG A2/B (0000000200000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000002, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(865592, 169);
+
+ #
+ # Firmware 10, type: STD FW (0x00000000), id: PAL/BG NICAM/A (0000000400000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000004, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(866112, 161);
+
+ #
+ # Firmware 11, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/A (0000000400000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000004, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(866280, 169);
+
+ #
+ # Firmware 12, type: STD FW (0x00000000), id: PAL/BG NICAM/B (0000000800000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000008, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(866112, 161);
+
+ #
+ # Firmware 13, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/B (0000000800000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000008, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(866280, 169);
+
+ #
+ # Firmware 14, type: STD FW (0x00000000), id: PAL/DK A2 (00000003000000e0), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(866800, 161);
+
+ #
+ # Firmware 15, type: STD FW MTS (0x00000004), id: PAL/DK A2 (00000003000000e0), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(866968, 169);
+
+ #
+ # Firmware 16, type: STD FW (0x00000000), id: PAL/DK NICAM (0000000c000000e0), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x0000000c, 0x000000e0); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(867144, 161);
+
+ #
+ # Firmware 17, type: STD FW MTS (0x00000004), id: PAL/DK NICAM (0000000c000000e0), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x0000000c, 0x000000e0); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(867312, 169);
+
+ #
+ # Firmware 18, type: STD FW (0x00000000), id: SECAM/K1 (0000000000200000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(867488, 161);
+
+ #
+ # Firmware 19, type: STD FW MTS (0x00000004), id: SECAM/K1 (0000000000200000), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(867656, 169);
+
+ #
+ # Firmware 20, type: STD FW (0x00000000), id: SECAM/K3 (0000000004000000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x04000000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(867832, 161);
+
+ #
+ # Firmware 21, type: STD FW MTS (0x00000004), id: SECAM/K3 (0000000004000000), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x04000000); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(868000, 169);
+
+ #
+ # Firmware 22, type: STD FW D2633 DTV6 ATSC (0x00010030), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00010030); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868176, 149);
+
+ #
+ # Firmware 23, type: STD FW D2620 DTV6 QAM (0x00000068), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000068); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868336, 149);
+
+ #
+ # Firmware 24, type: STD FW D2633 DTV6 QAM (0x00000070), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000070); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868488, 149);
+
+ #
+ # Firmware 25, type: STD FW D2620 DTV7 (0x00000088), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000088); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868648, 149);
+
+ #
+ # Firmware 26, type: STD FW D2633 DTV7 (0x00000090), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000090); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868800, 149);
+
+ #
+ # Firmware 27, type: STD FW D2620 DTV78 (0x00000108), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000108); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868960, 149);
+
+ #
+ # Firmware 28, type: STD FW D2633 DTV78 (0x00000110), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000110); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(869112, 149);
+
+ #
+ # Firmware 29, type: STD FW D2620 DTV8 (0x00000208), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000208); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868648, 149);
+
+ #
+ # Firmware 30, type: STD FW D2633 DTV8 (0x00000210), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000210); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(868800, 149);
+
+ #
+ # Firmware 31, type: STD FW FM (0x00000400), id: (0000000000000000), size: 135
+ #
+
+ write_le32(0x00000400); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(135); # Size
+ write_hunk_fix_endian(869584, 135);
+
+ #
+ # Firmware 32, type: STD FW (0x00000000), id: PAL/I (0000000000000010), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00000010); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(869728, 161);
+
+ #
+ # Firmware 33, type: STD FW MTS (0x00000004), id: PAL/I (0000000000000010), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x00000010); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(869896, 169);
+
+ #
+ # Firmware 34, type: STD FW (0x00000000), id: SECAM/L AM (0000001000400000), size: 169
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000010, 0x00400000); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(870072, 169);
+
+ #
+ # Firmware 35, type: STD FW (0x00000000), id: SECAM/L NICAM (0000000c00400000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x0000000c, 0x00400000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(870248, 161);
+
+ #
+ # Firmware 36, type: STD FW (0x00000000), id: SECAM/Lc (0000000000800000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00800000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(870416, 161);
+
+ #
+ # Firmware 37, type: STD FW (0x00000000), id: NTSC/M Kr (0000000000008000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(870584, 161);
+
+ #
+ # Firmware 38, type: STD FW LCD (0x00001000), id: NTSC/M Kr (0000000000008000), size: 161
+ #
+
+ write_le32(0x00001000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(870752, 161);
+
+ #
+ # Firmware 39, type: STD FW LCD NOGD (0x00003000), id: NTSC/M Kr (0000000000008000), size: 161
+ #
+
+ write_le32(0x00003000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(870920, 161);
+
+ #
+ # Firmware 40, type: STD FW MTS (0x00000004), id: NTSC/M Kr (0000000000008000), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(871088, 169);
+
+ #
+ # Firmware 41, type: STD FW (0x00000000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(871264, 161);
+
+ #
+ # Firmware 42, type: STD FW LCD (0x00001000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+ #
+
+ write_le32(0x00001000); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(871432, 161);
+
+ #
+ # Firmware 43, type: STD FW LCD NOGD (0x00003000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+ #
+
+ write_le32(0x00003000); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(871600, 161);
+
+ #
+ # Firmware 44, type: STD FW (0x00000000), id: NTSC/M Jp (0000000000002000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00002000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(871264, 161);
+
+ #
+ # Firmware 45, type: STD FW MTS (0x00000004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(871936, 169);
+
+ #
+ # Firmware 46, type: STD FW MTS LCD (0x00001004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+ #
+
+ write_le32(0x00001004); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(872112, 169);
+
+ #
+ # Firmware 47, type: STD FW MTS LCD NOGD (0x00003004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+ #
+
+ write_le32(0x00003004); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(872288, 169);
+
+ #
+ # Firmware 48, type: SCODE FW HAS IF (0x60000000), IF = 3.28 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3280); # IF
+ write_le32(192); # Size
+ write_hunk(811896, 192);
+
+ #
+ # Firmware 49, type: SCODE FW HAS IF (0x60000000), IF = 3.30 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3300); # IF
+ write_le32(192); # Size
+ write_hunk(813048, 192);
+
+ #
+ # Firmware 50, type: SCODE FW HAS IF (0x60000000), IF = 3.44 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3440); # IF
+ write_le32(192); # Size
+ write_hunk(812280, 192);
+
+ #
+ # Firmware 51, type: SCODE FW HAS IF (0x60000000), IF = 3.46 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3460); # IF
+ write_le32(192); # Size
+ write_hunk(812472, 192);
+
+ #
+ # Firmware 52, type: SCODE FW DTV6 ATSC OREN36 HAS IF (0x60210020), IF = 3.80 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60210020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3800); # IF
+ write_le32(192); # Size
+ write_hunk(809784, 192);
+
+ #
+ # Firmware 53, type: SCODE FW HAS IF (0x60000000), IF = 4.00 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4000); # IF
+ write_le32(192); # Size
+ write_hunk(812088, 192);
+
+ #
+ # Firmware 54, type: SCODE FW DTV6 ATSC TOYOTA388 HAS IF (0x60410020), IF = 4.08 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60410020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4080); # IF
+ write_le32(192); # Size
+ write_hunk(809976, 192);
+
+ #
+ # Firmware 55, type: SCODE FW HAS IF (0x60000000), IF = 4.20 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4200); # IF
+ write_le32(192); # Size
+ write_hunk(811704, 192);
+
+ #
+ # Firmware 56, type: SCODE FW MONO HAS IF (0x60008000), IF = 4.32 MHz id: NTSC/M Kr (0000000000008000), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le16(4320); # IF
+ write_le32(192); # Size
+ write_hunk(808056, 192);
+
+ #
+ # Firmware 57, type: SCODE FW HAS IF (0x60000000), IF = 4.45 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4450); # IF
+ write_le32(192); # Size
+ write_hunk(812664, 192);
+
+ #
+ # Firmware 58, type: SCODE FW HAS IF (0x60000000), IF = 4.50 MHz id: NTSC/M Jp (0000000000002000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00002000); # ID
+ write_le16(4500); # IF
+ write_le32(192); # Size
+ write_hunk(807672, 192);
+
+ #
+ # Firmware 59, type: SCODE FW LCD NOGD IF HAS IF (0x60023000), IF = 4.60 MHz id: NTSC/M Kr (0000000000008000), size: 192
+ #
+
+ write_le32(0x60023000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le16(4600); # IF
+ write_le32(192); # Size
+ write_hunk(807864, 192);
+
+ #
+ # Firmware 60, type: SCODE FW DTV78 ZARLINK456 HAS IF (0x62000100), IF = 4.76 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x62000100); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4760); # IF
+ write_le32(192); # Size
+ write_hunk(807288, 192);
+
+ #
+ # Firmware 61, type: SCODE FW HAS IF (0x60000000), IF = 4.94 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4940); # IF
+ write_le32(192); # Size
+ write_hunk(811512, 192);
+
+ #
+ # Firmware 62, type: SCODE FW DTV7 ZARLINK456 HAS IF (0x62000080), IF = 5.26 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x62000080); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5260); # IF
+ write_le32(192); # Size
+ write_hunk(810552, 192);
+
+ #
+ # Firmware 63, type: SCODE FW MONO HAS IF (0x60008000), IF = 5.32 MHz id: PAL/BG NICAM/B (0000000800000007), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000008, 0x00000007); # ID
+ write_le16(5320); # IF
+ write_le32(192); # Size
+ write_hunk(810744, 192);
+
+ #
+ # Firmware 64, type: SCODE FW DTV8 CHINA HAS IF (0x64000200), IF = 5.40 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x64000200); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5400); # IF
+ write_le32(192); # Size
+ write_hunk(807096, 192);
+
+ #
+ # Firmware 65, type: SCODE FW DTV6 ATSC OREN538 HAS IF (0x60110020), IF = 5.58 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60110020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5580); # IF
+ write_le32(192); # Size
+ write_hunk(809592, 192);
+
+ #
+ # Firmware 66, type: SCODE FW HAS IF (0x60000000), IF = 5.64 MHz id: PAL/BG A2/B (0000000200000007), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000002, 0x00000007); # ID
+ write_le16(5640); # IF
+ write_le32(192); # Size
+ write_hunk(808440, 192);
+
+ #
+ # Firmware 67, type: SCODE FW HAS IF (0x60000000), IF = 5.74 MHz id: PAL/BG NICAM/B (0000000800000007), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000008, 0x00000007); # ID
+ write_le16(5740); # IF
+ write_le32(192); # Size
+ write_hunk(808632, 192);
+
+ #
+ # Firmware 68, type: SCODE FW DTV7 DIBCOM52 HAS IF (0x61000080), IF = 5.90 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x61000080); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5900); # IF
+ write_le32(192); # Size
+ write_hunk(810360, 192);
+
+ #
+ # Firmware 69, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.00 MHz id: PAL/I (0000000000000010), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000000, 0x00000010); # ID
+ write_le16(6000); # IF
+ write_le32(192); # Size
+ write_hunk(808824, 192);
+
+ #
+ # Firmware 70, type: SCODE FW DTV6 QAM F6MHZ HAS IF (0x68000060), IF = 6.20 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x68000060); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(6200); # IF
+ write_le32(192); # Size
+ write_hunk(809400, 192);
+
+ #
+ # Firmware 71, type: SCODE FW HAS IF (0x60000000), IF = 6.24 MHz id: PAL/I (0000000000000010), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000010); # ID
+ write_le16(6240); # IF
+ write_le32(192); # Size
+ write_hunk(808248, 192);
+
+ #
+ # Firmware 72, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.32 MHz id: SECAM/K1 (0000000000200000), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le16(6320); # IF
+ write_le32(192); # Size
+ write_hunk(811320, 192);
+
+ #
+ # Firmware 73, type: SCODE FW HAS IF (0x60000000), IF = 6.34 MHz id: SECAM/K1 (0000000000200000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le16(6340); # IF
+ write_le32(192); # Size
+ write_hunk(809208, 192);
+
+ #
+ # Firmware 74, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.50 MHz id: SECAM/K3 (0000000004000000), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000000, 0x04000000); # ID
+ write_le16(6500); # IF
+ write_le32(192); # Size
+ write_hunk(811128, 192);
+
+ #
+ # Firmware 75, type: SCODE FW DTV6 ATSC ATI638 HAS IF (0x60090020), IF = 6.58 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60090020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(6580); # IF
+ write_le32(192); # Size
+ write_hunk(807480, 192);
+
+ #
+ # Firmware 76, type: SCODE FW HAS IF (0x60000000), IF = 6.60 MHz id: PAL/DK A2 (00000003000000e0), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le16(6600); # IF
+ write_le32(192); # Size
+ write_hunk(809016, 192);
+
+ #
+ # Firmware 77, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.68 MHz id: PAL/DK A2 (00000003000000e0), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le16(6680); # IF
+ write_le32(192); # Size
+ write_hunk(810936, 192);
+
+ #
+ # Firmware 78, type: SCODE FW DTV6 ATSC TOYOTA794 HAS IF (0x60810020), IF = 8.14 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60810020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(8140); # IF
+ write_le32(192); # Size
+ write_hunk(810168, 192);
+
+ #
+ # Firmware 79, type: SCODE FW HAS IF (0x60000000), IF = 8.20 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(8200); # IF
+ write_le32(192); # Size
+ write_hunk(812856, 192);
+}
+
+sub extract_firmware {
+ my $sourcefile = "hcw85bda.sys";
+ my $hash = "0e44dbf63bb0169d57446aec21881ff2";
+ my $outfile = "xc3028-v27.fw";
+ my $name = "xc2028 firmware";
+ my $version = 519;
+ my $nr_desc = 80;
+ my $out;
+
+ verify($sourcefile, $hash);
+
+ open INFILE, "<$sourcefile";
+ main_firmware($outfile, $name, $version, $nr_desc);
+ close INFILE;
+}
+
+extract_firmware;
+printf "Firmwares generated.\n";
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 1ffad19..b26f519 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -568,6 +568,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
Many thanks to following persons for their contribute (listed in alphabetical
order):
+- David Anderson for the donation of a webcam;
- Luca Capello for the donation of a webcam;
- Philippe Coval for having helped testing the PAS202BCA image sensor;
- Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
generated by cgit v0.10.2 at 2024-11-18 22:50:07 (GMT)