summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-generic.c18
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c6
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c9
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c12
-rw-r--r--arch/arm/mach-omap2/mux.h4
-rw-r--r--arch/arm/mach-omap2/timer.c4
-rw-r--r--arch/arm/mach-omap2/twl-common.c11
-rw-r--r--arch/arm/mach-omap2/usb-host.c18
-rw-r--r--arch/arm/mach-omap2/usb.h1
9 files changed, 61 insertions, 22 deletions
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 39c7838..87162e1 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
+static const char *omap36xx_boards_compat[] __initdata = {
+ "ti,omap36xx",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
+ .init_irq = omap_intc_of_init,
+ .handle_irq = omap3_intc_handle_irq,
+ .init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
+ .init_time = omap3_sync32k_timer_init,
+ .dt_compat = omap36xx_boards_compat,
+ .restart = omap3xxx_restart,
+MACHINE_END
+
static const char *omap3_gp_boards_compat[] __initdata = {
"ti,omap3-beagle",
"timll,omap3-devkit8000",
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f269184..8b9cd06 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -289,18 +289,12 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
static struct gpio_led gpio_leds[];
-/* PHY's VCC regulator might be added later, so flag that we need it */
-static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = {
- .needs_vcc = true,
-};
-
static struct usbhs_phy_data phy_data[] = {
{
.port = 2,
.reset_gpio = 147,
.vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
.vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
- .platform_data = &hsusb2_phy_data,
},
};
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index c3270c0..f6fe388 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
.name = "lp5523:kb1",
.chan_nr = 0,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:kb2",
.chan_nr = 1,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:kb3",
.chan_nr = 2,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:kb4",
.chan_nr = 3,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:b",
.chan_nr = 4,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:g",
.chan_nr = 5,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:r",
.chan_nr = 6,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:kb5",
.chan_nr = 7,
.led_current = 50,
+ .max_current = 100,
}, {
.name = "lp5523:kb6",
.chan_nr = 8,
.led_current = 50,
+ .max_current = 100,
}
};
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 64b5a83..8b6876c 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
struct gpmc_timings t;
int ret;
- if (gpmc_onenand_data->of_node)
+ if (gpmc_onenand_data->of_node) {
gpmc_read_settings_dt(gpmc_onenand_data->of_node,
&onenand_async);
+ if (onenand_async.sync_read || onenand_async.sync_write) {
+ if (onenand_async.sync_write)
+ gpmc_onenand_data->flags |=
+ ONENAND_SYNC_READWRITE;
+ else
+ gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+ onenand_async.sync_read = false;
+ onenand_async.sync_write = false;
+ }
+ }
omap2_onenand_set_async_mode(onenand_base);
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 5d2080e..16f78a9 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -28,7 +28,7 @@
#define OMAP_PULL_UP (1 << 4)
#define OMAP_ALTELECTRICALSEL (1 << 5)
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
#define OMAP_INPUT_EN (1 << 8)
#define OMAP_OFF_EN (1 << 9)
#define OMAP_OFFOUT_EN (1 << 10)
@@ -36,8 +36,6 @@
#define OMAP_OFF_PULL_EN (1 << 12)
#define OMAP_OFF_PULL_UP (1 << 13)
#define OMAP_WAKEUP_EN (1 << 14)
-
-/* 44xx specific mux bit defines */
#define OMAP_WAKEUP_EVENT (1 << 15)
/* Active pin states */
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index fa74a06..ead48fa 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -628,7 +628,7 @@ void __init omap4_local_timer_init(void)
#endif /* CONFIG_HAVE_ARM_TWD */
#endif /* CONFIG_ARCH_OMAP4 */
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
void __init omap5_realtime_timer_init(void)
{
omap4_sync32k_timer_init();
@@ -636,7 +636,7 @@ void __init omap5_realtime_timer_init(void)
clocksource_of_init();
}
-#endif /* CONFIG_SOC_OMAP5 */
+#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
/**
* omap_timer_init - build and register timer device with an
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index c05898f..b0d54da 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -24,6 +24,7 @@
#include <linux/i2c/twl.h>
#include <linux/gpio.h>
#include <linux/string.h>
+#include <linux/phy/phy.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -90,8 +91,18 @@ void __init omap_pmic_late_init(void)
}
#if defined(CONFIG_ARCH_OMAP3)
+struct phy_consumer consumers[] = {
+ PHY_CONSUMER("musb-hdrc.0", "usb"),
+};
+
+struct phy_init_data init_data = {
+ .consumers = consumers,
+ .num_consumers = ARRAY_SIZE(consumers),
+};
+
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
+ .init_data = &init_data,
};
static int omap3_batt_table[] = {
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index e83a6a4..10855eb 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
struct platform_device *pdev;
char *phy_id;
struct platform_device_info pdevinfo;
+ struct usb_phy_gen_xceiv_platform_data nop_pdata;
for (i = 0; i < num_phys; i++) {
@@ -455,11 +456,18 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
return -ENOMEM;
}
+ /* set platform data */
+ memset(&nop_pdata, 0, sizeof(nop_pdata));
+ if (gpio_is_valid(phy->vcc_gpio))
+ nop_pdata.needs_vcc = true;
+ nop_pdata.gpio_reset = phy->reset_gpio;
+ nop_pdata.type = USB_PHY_TYPE_USB2;
+
/* create a NOP PHY device */
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.name = nop_name;
pdevinfo.id = phy->port;
- pdevinfo.data = phy->platform_data;
+ pdevinfo.data = &nop_pdata;
pdevinfo.size_data =
sizeof(struct usb_phy_gen_xceiv_platform_data);
scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
@@ -474,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
- /* Do we need RESET regulator ? */
- if (gpio_is_valid(phy->reset_gpio)) {
- scnprintf(rail_name, MAX_STR,
- "hsusb%d_reset", phy->port);
- usbhs_add_regulator(rail_name, phy_id, "reset",
- phy->reset_gpio, 1);
- }
-
/* Do we need VCC regulator ? */
if (gpio_is_valid(phy->vcc_gpio)) {
scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index e7261eb..4ba2ae7 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -58,7 +58,6 @@ struct usbhs_phy_data {
int reset_gpio;
int vcc_gpio;
bool vcc_polarity; /* 1 active high, 0 active low */
- void *platform_data;
};
extern void usb_musb_init(struct omap_musb_board_data *board_data);