diff options
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-am3517crane.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-cm-t35.c | 5 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-flash.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-flash.h | 11 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-igep0020.c | 74 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3logic.c | 26 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 24 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 88 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/devices.c | 31 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/twl-common.c | 190 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/twl-common.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/vc3xxx_data.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/voltage.c | 21 |
16 files changed, 442 insertions, 55 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8141b76..964ee67 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS_TYPICAL select MENELAUS if ARCH_OMAP2 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + select HIGHMEM help Compile a kernel suitable for booting most boards diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 130ab00..2e50664 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -384,6 +384,11 @@ static struct platform_device sdp4430_dmic_codec = { .id = -1, }; +static struct platform_device sdp4430_hdmi_audio_codec = { + .name = "hdmi-audio-codec", + .id = -1, +}; + static struct omap_abe_twl6040_data sdp4430_abe_audio_data = { .card_name = "SDP4430", .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, @@ -418,6 +423,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_vbat, &sdp4430_dmic_codec, &sdp4430_abe_audio, + &sdp4430_hdmi_audio_codec, }; static struct omap_musb_board_data musb_board_data = { @@ -615,7 +621,9 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VANA | TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | - TWL_COMMON_REGULATOR_CLK32KG); + TWL_COMMON_REGULATOR_CLK32KG | + TWL_COMMON_REGULATOR_V1V8 | + TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &sdp4430_twldata, &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index c3851e8..3b8a53c 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -30,6 +30,7 @@ #include "common.h" #include <plat/usb.h> +#include "am35xx-emac.h" #include "mux.h" #include "control.h" @@ -90,6 +91,7 @@ static void __init am3517_crane_init(void) } usbhs_init(&usbhs_bdata); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 909a8b9..d8c35a3 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -498,6 +498,10 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = { .setup = cm_t35_twl_gpio_setup, }; +static struct twl4030_power_data cm_t35_power_data = { + .use_poweroff = true, +}; + static struct twl4030_platform_data cm_t35_twldata = { /* platform_data for children goes here */ .keypad = &cm_t35_kp_data, @@ -505,6 +509,7 @@ static struct twl4030_platform_data cm_t35_twldata = { .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, .vio = &cm_t35_vio, + .power = &cm_t35_power_data, }; static void __init cm_t35_init_i2c(void) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 0349fd2..70a81f9 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -87,7 +87,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; -static void +void __init board_onenand_init(struct mtd_partition *onenand_parts, u8 nr_parts, u8 cs) { @@ -98,7 +98,7 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } #else -static void +void __init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) { } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index d25503a..c44b70d 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -47,3 +47,14 @@ static inline void board_nand_init(struct mtd_partition *nand_parts, { } #endif + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +extern void board_onenand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs); +#else +static inline void board_onenand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs) +{ +} +#endif diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 740cee9..55dfccc 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -24,6 +24,8 @@ #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/mtd/nand.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +41,8 @@ #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" #include "common-board-devices.h" +#include "board-flash.h" +#include "control.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -60,6 +64,10 @@ #define IGEP3_GPIO_LED1_RED 16 #define IGEP3_GPIO_USBH_NRESET 183 +#define IGEP_SYSBOOT_MASK 0x1f +#define IGEP_SYSBOOT_NAND 0x0f +#define IGEP_SYSBOOT_ONENAND 0x10 + /* * IGEP2 Hardware Revision Table * @@ -110,8 +118,10 @@ static void __init igep2_get_revision(void) gpio_free(IGEP2_GPIO_LED1_RED); } -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \ + defined(CONFIG_MTD_NAND_OMAP2) || \ + defined(CONFIG_MTD_NAND_OMAP2_MODULE) #define ONENAND_MAP 0x20000000 @@ -123,7 +133,7 @@ static void __init igep2_get_revision(void) * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) */ -static struct mtd_partition igep_onenand_partitions[] = { +static struct mtd_partition igep_flash_partitions[] = { { .name = "X-Loader", .offset = 0, @@ -151,50 +161,28 @@ static struct mtd_partition igep_onenand_partitions[] = { }, }; -static struct omap_onenand_platform_data igep_onenand_data = { - .parts = igep_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep_onenand_partitions), - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep_onenand_data, - }, -}; +static inline u32 igep_get_sysboot_value(void) +{ + return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK; +} static void __init igep_flash_init(void) { - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* ONENAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP: Unable to find configuration in GPMC\n"); - return; + u32 mux; + mux = igep_get_sysboot_value(); + + if (mux == IGEP_SYSBOOT_NAND) { + pr_info("IGEP: initializing NAND memory device\n"); + board_nand_init(igep_flash_partitions, + ARRAY_SIZE(igep_flash_partitions), + 0, NAND_BUSWIDTH_16); + } else if (mux == IGEP_SYSBOOT_ONENAND) { + pr_info("IGEP: initializing OneNAND memory device\n"); + board_onenand_init(igep_flash_partitions, + ARRAY_SIZE(igep_flash_partitions), 0); + } else { + pr_err("IGEP: Flash: unsupported sysboot sequence found\n"); } - - igep_onenand_data.cs = onenandcs; - - if (platform_device_register(&igep_onenand_device) < 0) - pr_err("IGEP: Unable to register OneNAND device\n"); } #else diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7be8d65..ae7d3a7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -83,11 +83,13 @@ static struct { int usb_pwr_level; int reset_gpio; int usr_button_gpio; + int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, .reset_gpio = 129, .usr_button_gpio = 4, + .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; static struct gpio omap3_beagle_rev_gpios[] __initdata = { @@ -145,10 +147,12 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; + beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); @@ -251,7 +255,7 @@ static void __init beagle_display_init(void) static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .deferred = true, }, @@ -523,6 +527,7 @@ static void __init omap3_beagle_init(void) if (beagle_config.mmc1_gpio_wp != -EINVAL) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); omap3_beagle_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 9b3c141..c008bf8 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -4,8 +4,9 @@ * Copyright (C) 2010 Li-Pro.Net * Stephan Linz <linz@li-pro.net> * - * Copyright (C) 2010 Logic Product Development, Inc. + * Copyright (C) 2010-2012 Logic Product Development, Inc. * Peter Barada <peter.barada@logicpd.com> + * Ashwin BIhari <ashwin.bihari@logicpd.com> * * Modified from Beagle, EVM, and RX51 * @@ -45,6 +46,7 @@ #include <plat/gpmc-smsc911x.h> #include <plat/gpmc.h> #include <plat/sdrc.h> +#include <plat/usb.h> #define OMAP3LOGIC_SMSC911X_CS 1 @@ -85,6 +87,11 @@ static struct twl4030_gpio_platform_data omap3logic_gpio_data = { | BIT(13) | BIT(15) | BIT(16) | BIT(17), }; +static struct twl4030_usb_data omap3logic_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + + static struct twl4030_platform_data omap3logic_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -92,6 +99,7 @@ static struct twl4030_platform_data omap3logic_twldata = { /* platform_data for children goes here */ .gpio = &omap3logic_gpio_data, .vmmc1 = &omap3logic_vmmc1, + .usb = &omap3logic_usb_data, }; static int __init omap3logic_i2c_init(void) @@ -185,6 +193,20 @@ static inline void __init board_smsc911x_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -205,6 +227,8 @@ static void __init omap3logic_init(void) board_mmc_init(); board_smsc911x_init(); + usb_musb_init(NULL); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 1b782ba..c1061d4 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -28,6 +28,7 @@ #include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -58,12 +59,21 @@ #define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ -static int wl1271_gpios[] = {46, -1, -1}; +static struct ti_st_plat_data wilink_platform_data = { + .nshutdown_gpio = 46, + .dev_name = "/dev/ttyO1", + .flow_cntrl = 1, + .baud_rate = 3000000, + .chip_enable = NULL, + .suspend = NULL, + .resume = NULL, +}; + static struct platform_device wl1271_device = { .name = "kim", .id = -1, .dev = { - .platform_data = &wl1271_gpios, + .platform_data = &wilink_platform_data, }, }; @@ -117,6 +127,11 @@ static struct platform_device panda_abe_audio = { }, }; +static struct platform_device panda_hdmi_audio_codec = { + .name = "hdmi-audio-codec", + .id = -1, +}; + static struct platform_device btwilink_device = { .name = "btwilink", .id = -1, @@ -126,6 +141,7 @@ static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, &panda_abe_audio, + &panda_hdmi_audio_codec, &btwilink_device, }; @@ -323,7 +339,9 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VANA | TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | - TWL_COMMON_REGULATOR_CLK32KG); + TWL_COMMON_REGULATOR_CLK32KG | + TWL_COMMON_REGULATOR_V1V8 | + TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &omap4_panda_twldata, &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index d87ee06..415a4b7 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -44,6 +44,7 @@ #include <linux/leds-lp5523.h> #include <../drivers/staging/iio/light/tsl2563.h> +#include <linux/lis3lv02d.h> #include "mux.h" #include "hsmmc.h" @@ -63,6 +64,9 @@ #define RX51_TSC2005_RESET_GPIO 104 #define RX51_TSC2005_IRQ_GPIO 100 +#define LIS302_IRQ1_GPIO 181 +#define LIS302_IRQ2_GPIO 180 /* Not yet in use */ + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -73,6 +77,77 @@ enum { static struct wl12xx_platform_data wl1251_pdata; static struct tsc2005_platform_data tsc2005_pdata; +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) +static int lis302_setup(void) +{ + int err; + int irq1 = LIS302_IRQ1_GPIO; + int irq2 = LIS302_IRQ2_GPIO; + + /* gpio for interrupt pin 1 */ + err = gpio_request(irq1, "lis3lv02dl_irq1"); + if (err) { + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + /* gpio for interrupt pin 2 */ + err = gpio_request(irq2, "lis3lv02dl_irq2"); + if (err) { + gpio_free(irq1); + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + gpio_direction_input(irq1); + gpio_direction_input(irq2); + +out: + return err; +} + +static int lis302_release(void) +{ + gpio_free(LIS302_IRQ1_GPIO); + gpio_free(LIS302_IRQ2_GPIO); + + return 0; +} + +static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { + .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | + LIS3_CLICK_SINGLE_Z, + /* Limits are 0.5g * value */ + .click_thresh_x = 8, + .click_thresh_y = 8, + .click_thresh_z = 10, + /* Click must be longer than time limit */ + .click_time_limit = 9, + /* Kind of debounce filter */ + .click_latency = 50, + + /* Limits for all axis. millig-value / 18 to get HW values */ + .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, + .wakeup_thresh = 800 / 18, + .wakeup_flags2 = LIS3_WAKEUP_Z_HI , + .wakeup_thresh2 = 900 / 18, + + .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, + + /* Interrupt line 2 for click detection, line 1 for thresholds */ + .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, + + .axis_x = LIS3_DEV_X, + .axis_y = LIS3_INV_DEV_Y, + .axis_z = LIS3_INV_DEV_Z, + .setup_resources = lis302_setup, + .release_resources = lis302_release, + .st_min_limits = {-32, 3, 3}, + .st_max_limits = {-3, 32, 32}, + .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), +}; +#endif + #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) static struct tsl2563_platform_data rx51_tsl2563_platform_data = { .cover_comp_gain = 16, @@ -950,6 +1025,16 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { } }; +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + { + I2C_BOARD_INFO("lis3lv02d", 0x1d), + .platform_data = &rx51_lis3lv02d_data, + .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), + }, +#endif +}; + static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || @@ -971,7 +1056,8 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e433603..17dacef 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -355,6 +355,36 @@ static void __init omap_init_dmic(void) static inline void omap_init_dmic(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ + defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) + +static struct platform_device omap_hdmi_audio = { + .name = "omap-hdmi-audio", + .id = -1, +}; + +static void __init omap_init_hdmi_audio(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("dss_hdmi"); + if (!oh) { + printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n"); + return; + } + + pdev = omap_device_build("omap-hdmi-audio-dai", + -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), + "Can't build omap_device for omap-hdmi-audio-dai.\n"); + + platform_device_register(&omap_hdmi_audio); +} +#else +static inline void omap_init_hdmi_audio(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -704,6 +734,7 @@ static int __init omap2_init_devices(void) omap_init_mcpdm(); omap_init_dmic(); omap_init_camera(); + omap_init_hdmi_audio(); omap_init_mbox(); omap_init_mcspi(); omap_init_pmu(); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 7a7b893..119d5a9 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -31,6 +31,7 @@ #include "twl-common.h" #include "pm.h" +#include "voltage.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -47,6 +48,18 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { }, }; +static int twl_set_voltage(void *data, int target_uV) +{ + struct voltagedomain *voltdm = (struct voltagedomain *)data; + return voltdm_scale(voltdm, target_uV); +} + +static int twl_get_voltage(void *data) +{ + struct voltagedomain *voltdm = (struct voltagedomain *)data; + return voltdm_get_voltage(voltdm); +} + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -153,6 +166,48 @@ static struct regulator_init_data omap3_vpll2_idata = { .consumer_supplies = omap3_vpll2_supplies, }; +static struct regulator_consumer_supply omap3_vdd1_supply[] = { + REGULATOR_SUPPLY("vcc", "mpu.0"), +}; + +static struct regulator_consumer_supply omap3_vdd2_supply[] = { + REGULATOR_SUPPLY("vcc", "l3_main.0"), +}; + +static struct regulator_init_data omap3_vdd1 = { + .constraints = { + .name = "vdd_mpu_iva", + .min_uV = 600000, + .max_uV = 1450000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vdd1_supply), + .consumer_supplies = omap3_vdd1_supply, +}; + +static struct regulator_init_data omap3_vdd2 = { + .constraints = { + .name = "vdd_core", + .min_uV = 600000, + .max_uV = 1450000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vdd2_supply), + .consumer_supplies = omap3_vdd2_supply, +}; + +static struct twl_regulator_driver_data omap3_vdd1_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct twl_regulator_driver_data omap3_vdd2_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { @@ -160,6 +215,16 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, pmic_data->irq_base = TWL4030_IRQ_BASE; if (!pmic_data->irq_end) pmic_data->irq_end = TWL4030_IRQ_END; + if (!pmic_data->vdd1) { + omap3_vdd1.driver_data = &omap3_vdd1_drvdata; + omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva"); + pmic_data->vdd1 = &omap3_vdd1; + } + if (!pmic_data->vdd2) { + omap3_vdd2.driver_data = &omap3_vdd2_drvdata; + omap3_vdd2_drvdata.data = voltdm_lookup("core"); + pmic_data->vdd2 = &omap3_vdd2; + } /* Common platform data configurations */ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) @@ -201,6 +266,7 @@ static struct regulator_init_data omap4_vdac_idata = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .supply_regulator = "V2V1", }; static struct regulator_init_data omap4_vaux2_idata = { @@ -291,6 +357,7 @@ static struct regulator_init_data omap4_vcxio_idata = { }, .num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply), .consumer_supplies = omap4_vcxio_supply, + .supply_regulator = "V2V1", }; static struct regulator_init_data omap4_vusb_idata = { @@ -310,6 +377,105 @@ static struct regulator_init_data omap4_clk32kg_idata = { }, }; +static struct regulator_consumer_supply omap4_vdd1_supply[] = { + REGULATOR_SUPPLY("vcc", "mpu.0"), +}; + +static struct regulator_consumer_supply omap4_vdd2_supply[] = { + REGULATOR_SUPPLY("vcc", "iva.0"), +}; + +static struct regulator_consumer_supply omap4_vdd3_supply[] = { + REGULATOR_SUPPLY("vcc", "l3_main.0"), +}; + +static struct regulator_init_data omap4_vdd1 = { + .constraints = { + .name = "vdd_mpu", + .min_uV = 500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vdd1_supply), + .consumer_supplies = omap4_vdd1_supply, +}; + +static struct regulator_init_data omap4_vdd2 = { + .constraints = { + .name = "vdd_iva", + .min_uV = 500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vdd2_supply), + .consumer_supplies = omap4_vdd2_supply, +}; + +static struct regulator_init_data omap4_vdd3 = { + .constraints = { + .name = "vdd_core", + .min_uV = 500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vdd3_supply), + .consumer_supplies = omap4_vdd3_supply, +}; + + +static struct twl_regulator_driver_data omap4_vdd1_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct twl_regulator_driver_data omap4_vdd2_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct twl_regulator_driver_data omap4_vdd3_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct regulator_consumer_supply omap4_v1v8_supply[] = { + REGULATOR_SUPPLY("vio", "1-004b"), +}; + +static struct regulator_init_data omap4_v1v8_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + .always_on = true, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_v1v8_supply), + .consumer_supplies = omap4_v1v8_supply, +}; + +static struct regulator_consumer_supply omap4_v2v1_supply[] = { + REGULATOR_SUPPLY("v2v1", "1-004b"), +}; + +static struct regulator_init_data omap4_v2v1_idata = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_v2v1_supply), + .consumer_supplies = omap4_v2v1_supply, +}; + void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { @@ -318,6 +484,24 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, if (!pmic_data->irq_end) pmic_data->irq_end = TWL6030_IRQ_END; + if (!pmic_data->vdd1) { + omap4_vdd1.driver_data = &omap4_vdd1_drvdata; + omap4_vdd1_drvdata.data = voltdm_lookup("mpu"); + pmic_data->vdd1 = &omap4_vdd1; + } + + if (!pmic_data->vdd2) { + omap4_vdd2.driver_data = &omap4_vdd2_drvdata; + omap4_vdd2_drvdata.data = voltdm_lookup("iva"); + pmic_data->vdd2 = &omap4_vdd2; + } + + if (!pmic_data->vdd3) { + omap4_vdd3.driver_data = &omap4_vdd3_drvdata; + omap4_vdd3_drvdata.data = voltdm_lookup("core"); + pmic_data->vdd3 = &omap4_vdd3; + } + /* Common platform data configurations */ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) pmic_data->usb = &omap4_usb_pdata; @@ -350,5 +534,11 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG && !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8) + pmic_data->v1v8 = &omap4_v1v8_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1) + pmic_data->v2v1 = &omap4_v2v1_idata; } #endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 0962748..8fe71cf 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -22,6 +22,8 @@ #define TWL_COMMON_REGULATOR_VCXIO (1 << 8) #define TWL_COMMON_REGULATOR_VUSB (1 << 9) #define TWL_COMMON_REGULATOR_CLK32KG (1 << 10) +#define TWL_COMMON_REGULATOR_V1V8 (1 << 11) +#define TWL_COMMON_REGULATOR_V2V1 (1 << 12) /* TWL4030 LDO regulators */ #define TWL_COMMON_REGULATOR_VPLL1 (1 << 4) diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index a5ec7f8f..5d8eaf3 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -46,6 +46,7 @@ static struct omap_vc_common omap3_vc_common = { }; struct omap_vc_channel omap3_vc_mpu = { + .flags = OMAP_VC_CHANNEL_DEFAULT, .common = &omap3_vc_common, .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 8a36342..4dc60e8 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -73,7 +73,8 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm) int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt) { - int ret; + int ret, i; + unsigned long volt = 0; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); @@ -86,9 +87,23 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } - ret = voltdm->scale(voltdm, target_volt); + /* Adjust voltage to the exact voltage from the OPP table */ + for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { + if (voltdm->volt_data[i].volt_nominal >= target_volt) { + volt = voltdm->volt_data[i].volt_nominal; + break; + } + } + + if (!volt) { + pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n", + __func__, target_volt); + return -EINVAL; + } + + ret = voltdm->scale(voltdm, volt); if (!ret) - voltdm->nominal_volt = target_volt; + voltdm->nominal_volt = volt; return ret; } |