diff options
Diffstat (limited to 'arch/arm/mach-s3c2410/pm.c')
| -rw-r--r-- | arch/arm/mach-s3c2410/pm.c | 653 |
1 files changed, 75 insertions, 578 deletions
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index ebf294d..3b3a7db 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -1,11 +1,9 @@ /* linux/arch/arm/mach-s3c2410/pm.c * - * Copyright (c) 2004,2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX Power Manager (Suspend-To-RAM) support - * - * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information + * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,640 +18,139 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Parts based on arch/arm/mach-pxa/pm.c - * - * Thanks to Dimitry Andric for debugging */ #include <linux/init.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/crc32.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial_core.h> +#include <linux/sysdev.h> -#include <asm/cacheflush.h> #include <asm/hardware.h> #include <asm/io.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-irq.h> - -#include <asm/mach/time.h> - -#include "pm.h" - -/* for external use */ - -unsigned long s3c_pm_flags; - -#define PFX "s3c24xx-pm: " - -static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - - /* we restore the timings here, with the proviso that the board - * brings the system up in an slower, or equal frequency setting - * to the original system. - * - * if we cannot guarantee this, then things are going to go very - * wrong here, as we modify the refresh and both pll settings. - */ - - SAVE_ITEM(S3C2410_BWSCON), - SAVE_ITEM(S3C2410_BANKCON0), - SAVE_ITEM(S3C2410_BANKCON1), - SAVE_ITEM(S3C2410_BANKCON2), - SAVE_ITEM(S3C2410_BANKCON3), - SAVE_ITEM(S3C2410_BANKCON4), - SAVE_ITEM(S3C2410_BANKCON5), - - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), - SAVE_ITEM(S3C2410_REFRESH), -}; - -static struct sleep_save gpio_save[] = { - SAVE_ITEM(S3C2410_GPACON), - SAVE_ITEM(S3C2410_GPADAT), - - SAVE_ITEM(S3C2410_GPBCON), - SAVE_ITEM(S3C2410_GPBDAT), - SAVE_ITEM(S3C2410_GPBUP), - - SAVE_ITEM(S3C2410_GPCCON), - SAVE_ITEM(S3C2410_GPCDAT), - SAVE_ITEM(S3C2410_GPCUP), - - SAVE_ITEM(S3C2410_GPDCON), - SAVE_ITEM(S3C2410_GPDDAT), - SAVE_ITEM(S3C2410_GPDUP), - - SAVE_ITEM(S3C2410_GPECON), - SAVE_ITEM(S3C2410_GPEDAT), - SAVE_ITEM(S3C2410_GPEUP), - - SAVE_ITEM(S3C2410_GPFCON), - SAVE_ITEM(S3C2410_GPFDAT), - SAVE_ITEM(S3C2410_GPFUP), +#include <asm/mach-types.h> - SAVE_ITEM(S3C2410_GPGCON), - SAVE_ITEM(S3C2410_GPGDAT), - SAVE_ITEM(S3C2410_GPGUP), - - SAVE_ITEM(S3C2410_GPHCON), - SAVE_ITEM(S3C2410_GPHDAT), - SAVE_ITEM(S3C2410_GPHUP), +#include <asm/arch/regs-gpio.h> +#include <asm/arch/h1940.h> - SAVE_ITEM(S3C2410_DCLKCON), -}; +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> #ifdef CONFIG_S3C2410_PM_DEBUG - -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C24XX_VA_UART0), - SAVE_UART(S3C24XX_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C24XX_VA_UART2), -#endif -}; - -/* debug - * - * we send the debug to printascii() to allow it to be seen if the - * system never wakes up from the sleep -*/ - -extern void printascii(const char *); - -void pm_dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -static void s3c2410_pm_debug_init(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - +extern void pm_dbg(const char *fmt, ...); #define DBG(fmt...) pm_dbg(fmt) #else #define DBG(fmt...) printk(KERN_DEBUG fmt) - -#define s3c2410_pm_debug_init() do { } while(0) - -static struct sleep_save uart_save[] = {}; #endif -#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 - -/* suspend checking code... - * - * this next area does a set of crc checks over all the installed - * memory, so the system can verify if the resume was ok. - * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, - * increasing it will mean that the area corrupted will be less easy to spot, - * and reducing the size will cause the CRC save area to grow -*/ - -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) - -static u32 crc_size; /* size needed for the crc block */ -static u32 *crcs; /* allocated over suspend/resume */ - -typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); - -/* s3c2410_pm_run_res - * - * go thorugh the given resource list, and look for system ram -*/ - -static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) -{ - while (ptr != NULL) { - if (ptr->child != NULL) - s3c2410_pm_run_res(ptr->child, fn, arg); - - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { - DBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); - arg = (fn)(ptr, arg); - } - - ptr = ptr->sibling; - } -} - -static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) -{ - s3c2410_pm_run_res(&iomem_resource, fn, arg); -} - -static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) -{ - u32 size = (u32)(res->end - res->start)+1; - - size += CHECK_CHUNKSIZE-1; - size /= CHECK_CHUNKSIZE; - - DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); - - *val += size * sizeof(u32); - return val; -} - -/* s3c2410_pm_prepare_check - * - * prepare the necessary information for creating the CRCs. This - * must be done before the final save, as it will require memory - * allocating, and thus touching bits of the kernel we do not - * know about. -*/ - -static void s3c2410_pm_check_prepare(void) +static void s3c2410_pm_prepare(void) { - crc_size = 0; + /* ensure at least GSTATUS3 has the resume address */ - s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); + __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); + DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - crcs = kmalloc(crc_size+4, GFP_KERNEL); - if (crcs == NULL) - printk(KERN_ERR "Cannot allocated CRC save area\n"); -} + if (machine_is_h1940()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; -static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) -{ - unsigned long addr, left; + /* generate check for the bootloader to check on resume */ - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; + for (ptr = 0; ptr < 0x40000; ptr += 0x400) + calc += __raw_readl(base+ptr); - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - *val = crc32_le(~0, phys_to_virt(addr), left); - val++; + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - return val; -} - -/* s3c2410_pm_check_store - * - * compute the CRC values for the memory blocks before the final - * sleep. -*/ - -static void s3c2410_pm_check_store(void) -{ - if (crcs != NULL) - s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); -} - -/* in_region - * - * return TRUE if the area defined by ptr..ptr+size contatins the - * what..what+whatsz -*/ - -static inline int in_region(void *ptr, int size, void *what, size_t whatsz) -{ - if ((what+whatsz) < ptr) - return 0; - - if (what > (ptr+size)) - return 0; - - return 1; -} - -static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) -{ - void *save_at = phys_to_virt(s3c2410_sleep_save_phys); - unsigned long addr; - unsigned long left; - void *ptr; - u32 calc; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; + /* the RX3715 uses similar code and the same H1940 and the + * same offsets for resume and checksum pointers */ - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; + if (machine_is_rx3715()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; - ptr = phys_to_virt(addr); + /* generate check for the bootloader to check on resume */ - if (in_region(ptr, left, crcs, crc_size)) { - DBG("skipping %08lx, has crc block in\n", addr); - goto skip_check; - } + for (ptr = 0; ptr < 0x40000; ptr += 0x4) + calc += __raw_readl(base+ptr); - if (in_region(ptr, left, save_at, 32*4 )) { - DBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - - /* calculate and check the checksum */ - - calc = crc32_le(~0, ptr, left); - if (calc != *val) { - printk(KERN_ERR PFX "Restore CRC error at " - "%08lx (%08x vs %08x)\n", addr, calc, *val); - - DBG("Restore CRC error at %08lx (%08x vs %08x)\n", - addr, calc, *val); - } - - skip_check: - val++; + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - return val; -} + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 1); -/* s3c2410_pm_check_restore - * - * check the CRCs after the restore event and free the memory used - * to hold them -*/ - -static void s3c2410_pm_check_restore(void) -{ - if (crcs != NULL) { - s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } } -#else - -#define s3c2410_pm_check_prepare() do { } while(0) -#define s3c2410_pm_check_restore() do { } while(0) -#define s3c2410_pm_check_store() do { } while(0) -#endif - -/* helper functions to save and restore register state */ - -void s3c2410_pm_do_save(struct sleep_save *ptr, int count) +static int s3c2410_pm_resume(struct sys_device *dev) { - for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); - DBG("saved %p value %08lx\n", ptr->reg, ptr->val); - } -} + unsigned long tmp; -/* s3c2410_pm_do_restore - * - * restore the system from the given list of saved registers - * - * Note, we do not use DBG() in here, as the system may not have - * restore the UARTs state yet -*/ + /* unset the return-from-sleep flag, to ensure reset */ -void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); - } -} + tmp = __raw_readl(S3C2410_GSTATUS2); + tmp &= S3C2410_GSTATUS2_OFFRESET; + __raw_writel(tmp, S3C2410_GSTATUS2); -/* s3c2410_pm_do_restore_core - * - * similar to s3c2410_pm_do_restore_core - * - * WARNING: Do not put any debug in here that may effect memory or use - * peripherals, as things may be changing! -*/ + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 0); -static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - __raw_writel(ptr->val, ptr->reg); - } + return 0; } -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ - -static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) +static int s3c2410_pm_add(struct sys_device *dev) { - int i; + pm_cpu_prep = s3c2410_pm_prepare; + pm_cpu_sleep = s3c2410_cpu_suspend; - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if ((which) & (1L<<i)) { - DBG("IRQ %d asserted at resume\n", start+i); - } - } + return 0; } -/* s3c2410_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - unsigned long irqstate; - unsigned long pinstate; - int irq = s3c2410_gpio_getirq(pin); - - if (irqoffs < 4) - irqstate = s3c_irqwake_intmask & (1L<<irqoffs); - else - irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); - - pinstate = s3c2410_gpio_getcfg(pin); - - if (!irqstate) { - if (pinstate == S3C2410_GPIO_IRQ) - DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); - } else { - if (pinstate == S3C2410_GPIO_IRQ) { - DBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); - } - } -} +#if defined(CONFIG_CPU_S3C2410) +static struct sysdev_driver s3c2410_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; -/* s3c2410_pm_configure_extint - * - * configure all external interrupt pins -*/ +/* register ourselves */ -static void s3c2410_pm_configure_extint(void) +static int __init s3c2410_pm_drvinit(void) { - int pin; - - /* for each of the external interrupts (EINT0..EINT15) we - * need to check wether it is an external interrupt source, - * and then configure it as an input if it is not - */ - - for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); - } - - for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); - } + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); } -void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); - -#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) - -/* s3c2410_pm_enter - * - * central control for sleep/resume process -*/ - -static int s3c2410_pm_enter(suspend_state_t state) -{ - unsigned long regs_save[16]; - - /* ensure the debug is initialised (if enabled) */ - - s3c2410_pm_debug_init(); - - DBG("s3c2410_pm_enter(%d)\n", state); - - if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { - printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); - return -EINVAL; - } - - if (state != PM_SUSPEND_MEM) { - printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); - return -EINVAL; - } - - /* check if we have anything to wake-up with... bad things seem - * to happen if you suspend with no wakeup (system will often - * require a full power-cycle) - */ - - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && - !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { - printk(KERN_ERR PFX "No sources enabled for wake-up!\n"); - printk(KERN_ERR PFX "Aborting sleep\n"); - return -EINVAL; - } - - /* prepare check area if configured */ - - s3c2410_pm_check_prepare(); - - /* store the physical address of the register recovery block */ - - s3c2410_sleep_save_phys = virt_to_phys(regs_save); - - DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - - /* save all necessary core registers not covered by the drivers */ - - s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); - - /* set the irq configuration for wake */ - - s3c2410_pm_configure_extint(); - - DBG("sleep: irq wakeup masks: %08lx,%08lx\n", - s3c_irqwake_intmask, s3c_irqwake_eintmask); - - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - - /* call cpu specific preperation */ - - pm_cpu_prep(); - - /* flush cache back to ram */ - - flush_cache_all(); - - s3c2410_pm_check_store(); - - /* send the cpu to sleep... */ - - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - - /* s3c2410_cpu_save will also act as our return point from when - * we resume as it saves its own register state, so use the return - * code to differentiate return from save and return from sleep */ - - if (s3c2410_cpu_save(regs_save) == 0) { - flush_cache_all(); - pm_cpu_sleep(); - } - - /* restore the cpu state */ - - cpu_init(); - - /* restore the system state */ - - s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); - - s3c2410_pm_debug_init(); - - /* check what irq (if any) restored the system */ - - DBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); - - DBG("post sleep, preparing to return\n"); - - s3c2410_pm_check_restore(); - - /* ok, let's return from sleep */ +arch_initcall(s3c2410_pm_drvinit); +#endif - DBG("S3C2410 PM Resume (post-restore)\n"); - return 0; -} +#if defined(CONFIG_CPU_S3C2440) +static struct sysdev_driver s3c2440_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; -/* - * Called after processes are frozen, but before we shut down devices. - */ -static int s3c2410_pm_prepare(suspend_state_t state) +static int __init s3c2440_pm_drvinit(void) { - return 0; + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); } -/* - * Called after devices are re-setup, but before processes are thawed. - */ -static int s3c2410_pm_finish(suspend_state_t state) -{ - return 0; -} +arch_initcall(s3c2440_pm_drvinit); +#endif -/* - * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. - */ -static struct pm_ops s3c2410_pm_ops = { - .pm_disk_mode = PM_DISK_FIRMWARE, - .prepare = s3c2410_pm_prepare, - .enter = s3c2410_pm_enter, - .finish = s3c2410_pm_finish, +#if defined(CONFIG_CPU_S3C2442) +static struct sysdev_driver s3c2442_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, }; -/* s3c2410_pm_init - * - * Attach the power management functions. This should be called - * from the board specific initialisation if the board supports - * it. -*/ - -int __init s3c2410_pm_init(void) +static int __init s3c2442_pm_drvinit(void) { - printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n"); - - pm_set_ops(&s3c2410_pm_ops); - return 0; + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); } + +arch_initcall(s3c2442_pm_drvinit); +#endif |