summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2440
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2440')
-rw-r--r--arch/arm/mach-s3c2440/mach-gta02.c93
-rw-r--r--arch/arm/mach-s3c2440/mach-mini2440.c24
-rw-r--r--arch/arm/mach-s3c2440/mach-rx1950.c95
3 files changed, 124 insertions, 88 deletions
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 9f2c14e..0db2411 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -58,6 +58,9 @@
#include <linux/mfd/pcf50633/pmic.h>
#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -86,6 +89,8 @@
#include <plat/udc.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
+#include <plat/ts.h>
+
static struct pcf50633 *gta02_pcf;
@@ -280,9 +285,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
.apply_uV = 1,
- .state_mem = {
- .enabled = 1,
- },
},
},
[PCF50633_REGULATOR_DOWN1] = {
@@ -301,9 +303,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
.always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
},
},
[PCF50633_REGULATOR_HCLDO] = {
@@ -311,8 +310,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 2000000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
},
},
[PCF50633_REGULATOR_LDO1] = {
@@ -320,10 +319,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
- .state_mem = {
- .enabled = 0,
- },
},
},
[PCF50633_REGULATOR_LDO2] = {
@@ -347,6 +344,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 3200000,
.max_uV = 3200000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
},
@@ -355,10 +353,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
- .state_mem = {
- .enabled = 1,
- },
},
},
[PCF50633_REGULATOR_LDO6] = {
@@ -373,9 +369,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
- .state_mem = {
- .enabled = 1,
- },
},
},
@@ -455,28 +448,10 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
};
-static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
-{
- switch (cmd) {
- case S3C2410_UDC_P_ENABLE:
- pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
- gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
- break;
- case S3C2410_UDC_P_DISABLE:
- pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
- gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
- break;
- case S3C2410_UDC_P_RESET:
- pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
- /* FIXME: Do something here. */
- }
-}
-
/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
.vbus_draw = gta02_udc_vbus_draw,
- .udc_command = gta02_udc_command,
-
+ .pullup_pin = GTA02_GPIO_USB_PULLUP,
};
/* USB */
@@ -489,6 +464,43 @@ static struct s3c2410_hcd_info gta02_usb_info __initdata = {
},
};
+/* Touchscreen */
+static struct s3c2410_ts_mach_info gta02_ts_info = {
+ .delay = 10000,
+ .presc = 0xff, /* slow as we can go */
+ .oversampling_shift = 2,
+};
+
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+ {
+ .gpio = GTA02_GPIO_AUX_KEY,
+ .code = KEY_PHONE,
+ .desc = "Aux",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+ {
+ .gpio = GTA02_GPIO_HOLD_KEY,
+ .code = KEY_PAUSE,
+ .desc = "Hold",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+ .buttons = gta02_buttons,
+ .nbuttons = ARRAY_SIZE(gta02_buttons),
+};
+
+static struct platform_device gta02_buttons_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gta02_buttons_pdata,
+ },
+};
static void __init gta02_map_io(void)
{
@@ -509,7 +521,11 @@ static struct platform_device *gta02_devices[] __initdata = {
&gta02_nor_flash,
&s3c24xx_pwm_device,
&s3c_device_iis,
+ &samsung_asoc_dma,
&s3c_device_i2c0,
+ &gta02_buttons_device,
+ &s3c_device_adc,
+ &s3c_device_ts,
};
/* These guys DO need to be children of PMU. */
@@ -559,6 +575,7 @@ static void __init gta02_machine_init(void)
#endif
s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+ s3c24xx_ts_set_platdata(&gta02_ts_info);
s3c_ohci_set_platdata(&gta02_usb_info);
s3c_nand_set_platdata(&gta02_nand_info);
s3c_i2c0_set_platdata(NULL);
@@ -567,6 +584,8 @@ static void __init gta02_machine_init(void)
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
pm_power_off = gta02_poweroff;
+
+ regulator_has_full_constraints();
}
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 7c3fb07..dfedc9c 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
/* USB device UDC support */
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
- pr_debug("udc: pullup(%d)\n", cmd);
-
- switch (cmd) {
- case S3C2410_UDC_P_ENABLE :
- gpio_set_value(S3C2410_GPC(5), 1);
- break;
- case S3C2410_UDC_P_DISABLE :
- gpio_set_value(S3C2410_GPC(5), 0);
- break;
- case S3C2410_UDC_P_RESET :
- break;
- default:
- break;
- }
-}
-
static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
- .udc_command = mini2440_udc_pullup,
+ .pullup_pin = S3C2410_GPC(5),
};
@@ -651,10 +633,6 @@ static void __init mini2440_init(void)
s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
- /* Make sure the D+ pullup pin is output */
- WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
- gpio_direction_output(S3C2410_GPC(5), 0);
-
/* mark the key as input, without pullups (there is one on the board) */
for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index eab6ae5..27ea950 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -263,27 +263,78 @@ void rx1950_disable_charger(void)
gpio_direction_output(S3C2410_GPJ(3), 0);
}
+DEFINE_SPINLOCK(rx1950_blink_spin);
+
+static int rx1950_led_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ int blink_gpio, check_gpio;
+
+ switch (gpio) {
+ case S3C2410_GPA(6):
+ blink_gpio = S3C2410_GPA(4);
+ check_gpio = S3C2410_GPA(3);
+ break;
+ case S3C2410_GPA(7):
+ blink_gpio = S3C2410_GPA(3);
+ check_gpio = S3C2410_GPA(4);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ if (delay_on && delay_off && !*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ spin_lock(&rx1950_blink_spin);
+
+ switch (state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ if (!gpio_get_value(check_gpio))
+ gpio_set_value(S3C2410_GPJ(6), 0);
+ gpio_set_value(blink_gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ gpio_set_value(gpio, 0);
+ gpio_set_value(S3C2410_GPJ(6), 1);
+ gpio_set_value(blink_gpio, 1);
+ break;
+ }
+
+ spin_unlock(&rx1950_blink_spin);
+
+ return 0;
+}
+
static struct gpio_led rx1950_leds_desc[] = {
{
- .name = "Green",
- .default_trigger = "main-battery-charging-or-full",
- .gpio = S3C2410_GPA(6),
+ .name = "Green",
+ .default_trigger = "main-battery-full",
+ .gpio = S3C2410_GPA(6),
+ .retain_state_suspended = 1,
},
{
- .name = "Red",
- .default_trigger = "main-battery-full",
- .gpio = S3C2410_GPA(7),
+ .name = "Red",
+ .default_trigger
+ = "main-battery-charging-blink-full-solid",
+ .gpio = S3C2410_GPA(7),
+ .retain_state_suspended = 1,
},
{
- .name = "Blue",
+ .name = "Blue",
.default_trigger = "rx1950-acx-mem",
- .gpio = S3C2410_GPA(11),
+ .gpio = S3C2410_GPA(11),
+ .retain_state_suspended = 1,
},
};
static struct gpio_led_platform_data rx1950_leds_pdata = {
.num_leds = ARRAY_SIZE(rx1950_leds_desc),
.leds = rx1950_leds_desc,
+ .gpio_blink_set = rx1950_led_blink_set,
};
static struct platform_device rx1950_leds = {
@@ -566,26 +617,10 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
.sets = rx1950_nand_sets,
};
-static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
- switch (cmd) {
- case S3C2410_UDC_P_ENABLE:
- gpio_direction_output(S3C2410_GPJ(5), 1);
- break;
- case S3C2410_UDC_P_DISABLE:
- gpio_direction_output(S3C2410_GPJ(5), 0);
- break;
- case S3C2410_UDC_P_RESET:
- break;
- default:
- break;
- }
-}
-
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
- .udc_command = rx1950_udc_pullup,
.vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
+ .pullup_pin = S3C2410_GPJ(5),
};
static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
@@ -750,9 +785,6 @@ static void __init rx1950_init_machine(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
- WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
- gpio_direction_output(S3C2410_GPJ(5), 0);
-
/* mmc power is disabled by default */
WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
gpio_direction_output(S3C2410_GPJ(1), 0);
@@ -771,6 +803,13 @@ static void __init rx1950_init_machine(void)
WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+ WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
+ WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
+ WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
+ gpio_direction_output(S3C2410_GPA(3), 0);
+ gpio_direction_output(S3C2410_GPA(4), 0);
+ gpio_direction_output(S3C2410_GPJ(6), 0);
+
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
i2c_register_board_info(0, rx1950_i2c_devices,
generated by cgit v0.10.2 at 2024-11-13 08:24:47 (GMT)