diff options
Diffstat (limited to 'arch/arm/mach-s3c6410')
| -rw-r--r-- | arch/arm/mach-s3c6410/Kconfig | 109 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6410/Makefile | 26 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6410/cpu.c | 105 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6410/mach-anw6410.c | 245 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6410/mach-hmt.c | 276 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6410/mach-ncp.c | 107 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6410/mach-smdk6410.c | 457 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6410/setup-sdhci.c | 68 |
8 files changed, 0 insertions, 1393 deletions
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig deleted file mode 100644 index 162f456..0000000 --- a/arch/arm/mach-s3c6410/Kconfig +++ /dev/null @@ -1,109 +0,0 @@ -# Copyright 2008 Openmoko, Inc. -# Copyright 2008 Simtec Electronics -# -# Licensed under GPLv2 - -# Configuration options for the S3C6410 CPU - -config CPU_S3C6410 - bool - select CPU_S3C6400_INIT - select CPU_S3C6400_CLOCK - help - Enable S3C6410 CPU support - -config S3C6410_SETUP_SDHCI - bool - select S3C64XX_SETUP_SDHCI_GPIO - help - Internal helper functions for S3C6410 based SDHCI systems - -config MACH_ANW6410 - bool "A&W6410" - select CPU_S3C6410 - select S3C_DEV_FB - select S3C64XX_SETUP_FB_24BPP - help - Machine support for the A&W6410 - -config MACH_SMDK6410 - bool "SMDK6410" - select CPU_S3C6410 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - select S3C_DEV_FB - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C6410_SETUP_SDHCI - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_FB_24BPP - help - Machine support for the Samsung SMDK6410 - -# At least some of the SMDK6410s were shipped with the card detect -# for the MMC/SD slots connected to the same input. This means that -# either the boards need to be altered to have channel0 to an alternate -# configuration or that only one slot can be used. - -choice - prompt "SMDK6410 MMC/SD slot setup" - depends on MACH_SMDK6410 - -config SMDK6410_SD_CH0 - bool "Use channel 0 only" - depends on MACH_SMDK6410 - help - Select CON7 (channel 0) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -config SMDK6410_SD_CH1 - bool "Use channel 1 only" - depends on MACH_SMDK6410 - help - Select CON6 (channel 1) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -endchoice - -config SMDK6410_WM1190_EV1 - bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" - depends on MACH_SMDK6410 - select REGULATOR - select REGULATOR_WM8350 - select S3C24XX_GPIO_EXTRA64 - select MFD_WM8350_I2C - select MFD_WM8350_CONFIG_MODE_0 - select MFD_WM8350_CONFIG_MODE_3 - select MFD_WM8352_CONFIG_MODE_0 - help - The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC - and audio daughtercard for the Samsung SMDK6410 reference - platform. Enabling this option will build support for this - module into the kernel. The presence of the module will be - detected at runtime so the the resulting kernel can be used - with or without the 1190-EV1 fitted. - -config MACH_NCP - bool "NCP" - select CPU_S3C6410 - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC1 - select S3C64XX_SETUP_I2C1 - help - Machine support for the Samsung NCP - -config MACH_HMT - bool "Airgoo HMT" - select CPU_S3C6410 - select S3C_DEV_FB - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select S3C64XX_SETUP_FB_24BPP - select HAVE_PWM - help - Machine support for the Airgoo HMT diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile deleted file mode 100644 index 3e48c3d..0000000 --- a/arch/arm/mach-s3c6410/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# arch/arm/plat-s3c6410/Makefile -# -# Copyright 2008 Openmoko, Inc. -# Copyright 2008 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S3C6410 system - -obj-$(CONFIG_CPU_S3C6410) += cpu.o - -# Helper and device support - -obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o - -# machine support - -obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o -obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o -obj-$(CONFIG_MACH_NCP) += mach-ncp.o -obj-$(CONFIG_MACH_HMT) += mach-hmt.o diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c deleted file mode 100644 index 522c086..0000000 --- a/arch/arm/mach-s3c6410/cpu.c +++ /dev/null @@ -1,105 +0,0 @@ -/* linux/arch/arm/mach-s3c6410/cpu.c - * - * Copyright 2008 Simtec Electronics - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <plat/cpu-freq.h> -#include <plat/regs-serial.h> -#include <plat/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/sdhci.h> -#include <plat/iic-core.h> -#include <plat/s3c6400.h> -#include <plat/s3c6410.h> - -/* Initial IO mappings */ - -static struct map_desc s3c6410_iodesc[] __initdata = { -}; - -/* s3c6410_map_io - * - * register the standard cpu IO areas -*/ - -void __init s3c6410_map_io(void) -{ - iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc)); - - /* initialise device information early */ - s3c6410_default_sdhci0(); - s3c6410_default_sdhci1(); - s3c6410_default_sdhci2(); - - /* the i2c devices are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - - s3c_device_nand.name = "s3c6400-nand"; -} - -void __init s3c6410_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c24xx_register_baseclocks(xtal); - s3c64xx_register_clocks(); - s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK); - s3c6400_setup_clocks(); -} - -void __init s3c6410_init_irq(void) -{ - /* VIC0 is missing IRQ7, VIC1 is fully populated. */ - s3c64xx_init_irq(~0 & ~(1 << 7), ~0); -} - -struct sysdev_class s3c6410_sysclass = { - .name = "s3c6410-core", -}; - -static struct sys_device s3c6410_sysdev = { - .cls = &s3c6410_sysclass, -}; - -static int __init s3c6410_core_init(void) -{ - return sysdev_class_register(&s3c6410_sysclass); -} - -core_initcall(s3c6410_core_init); - -int __init s3c6410_init(void) -{ - printk("S3C6410: Initialising architecture\n"); - - return sysdev_register(&s3c6410_sysdev); -} diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c deleted file mode 100644 index 661cca6..0000000 --- a/arch/arm/mach-s3c6410/mach-anw6410.c +++ /dev/null @@ -1,245 +0,0 @@ -/* linux/arch/arm/mach-s3c6410/mach-anw6410.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * Copyright 2009 Kwangwoo Lee - * Kwangwoo Lee <kwangwoo.lee@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/fb.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/dm9000.h> - -#include <video/platform_lcd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/regs-fb.h> -#include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <plat/iic.h> -#include <plat/fb.h> - -#include <plat/s3c6410.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/regs-gpio.h> -#include <plat/regs-modem.h> - -/* DM9000 */ -#define ANW6410_PA_DM9000 (0x18000000) - -/* A hardware buffer to control external devices is mapped at 0x30000000. - * It can not be read. So current status must be kept in anw6410_extdev_status. - */ -#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000) -#define ANW6410_PA_EXTDEV (0x30000000) - -#define ANW6410_EN_DM9000 (1<<11) -#define ANW6410_EN_LCD (1<<14) - -static __u32 anw6410_extdev_status; - -static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, -}; - -/* framebuffer and LCD setup. */ -static void __init anw6410_lcd_mode_set(void) -{ - u32 tmp; - - /* set the LCD type */ - tmp = __raw_readl(S3C64XX_SPCON); - tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; - tmp |= S3C64XX_SPCON_LCD_SEL_RGB; - __raw_writel(tmp, S3C64XX_SPCON); - - /* remove the LCD bypass */ - tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); - tmp &= ~MIFPCON_LCD_BYPASS; - __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); -} - -/* GPF1 = LCD panel power - * GPF4 = LCD backlight control - */ -static void anw6410_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { - anw6410_extdev_status |= (ANW6410_EN_LCD << 16); - __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV); - - gpio_direction_output(S3C64XX_GPF(1), 1); - gpio_direction_output(S3C64XX_GPF(4), 1); - } else { - anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16); - __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV); - - gpio_direction_output(S3C64XX_GPF(1), 0); - gpio_direction_output(S3C64XX_GPF(4), 0); - } -} - -static struct plat_lcd_data anw6410_lcd_power_data = { - .set_power = anw6410_lcd_power_set, -}; - -static struct platform_device anw6410_lcd_powerdev = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &anw6410_lcd_power_data, -}; - -static struct s3c_fb_pd_win anw6410_fb_win0 = { - /* this is to ensure we use win0 */ - .win_mode = { - .pixclock = 41094, - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 16, -}; - -/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ -static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = { - .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, - .win[0] = &anw6410_fb_win0, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, -}; - -/* DM9000AEP 10/100 ethernet controller */ -static void __init anw6410_dm9000_enable(void) -{ - anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16); - __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV); -} - -static struct resource anw6410_dm9000_resource[] = { - [0] = { - .start = ANW6410_PA_DM9000, - .end = ANW6410_PA_DM9000 + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = ANW6410_PA_DM9000 + 4, - .end = ANW6410_PA_DM9000 + 4 + 500, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_EINT(15), - .end = IRQ_EINT(15), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, - }, -}; - -static struct dm9000_plat_data anw6410_dm9000_pdata = { - .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), - /* dev_addr can be set to provide hwaddr. */ -}; - -static struct platform_device anw6410_device_eth = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(anw6410_dm9000_resource), - .resource = anw6410_dm9000_resource, - .dev = { - .platform_data = &anw6410_dm9000_pdata, - }, -}; - -static struct map_desc anw6410_iodesc[] __initdata = { - { - .virtual = (unsigned long)ANW6410_VA_EXTDEV, - .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV), - .length = SZ_64K, - .type = MT_DEVICE, - }, -}; - -static struct platform_device *anw6410_devices[] __initdata = { - &s3c_device_fb, - &anw6410_lcd_powerdev, - &anw6410_device_eth, -}; - -static void __init anw6410_map_io(void) -{ - s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); - - anw6410_lcd_mode_set(); -} - -static void __init anw6410_machine_init(void) -{ - s3c_fb_set_platdata(&anw6410_lcd_pdata); - - gpio_request(S3C64XX_GPF(1), "panel power"); - gpio_request(S3C64XX_GPF(4), "LCD backlight"); - - anw6410_dm9000_enable(); - - platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices)); -} - -MACHINE_START(ANW6410, "A&W6410") - /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C64XX_PA_SDRAM + 0x100, - - .init_irq = s3c6410_init_irq, - .map_io = anw6410_map_io, - .init_machine = anw6410_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c deleted file mode 100644 index 7619456..0000000 --- a/arch/arm/mach-s3c6410/mach-hmt.c +++ /dev/null @@ -1,276 +0,0 @@ -/* mach-hmt.c - Platform code for Airgoo HMT - * - * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/fb.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/pwm_backlight.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/regs-fb.h> -#include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <plat/iic.h> -#include <plat/fb.h> -#include <plat/nand.h> - -#include <plat/s3c6410.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) - -static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, -}; - -static int hmt_bl_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable"); - if (!ret) - ret = gpio_direction_output(S3C64XX_GPB(4), 0); - - return ret; -} - -static int hmt_bl_notify(struct device *dev, int brightness) -{ - /* - * translate from CIELUV/CIELAB L*->brightness, E.G. from - * perceived luminance to light output. Assumes range 0..25600 - */ - if (brightness < 0x800) { - /* Y = Yn * L / 903.3 */ - brightness = (100*256 * brightness + 231245/2) / 231245; - } else { - /* Y = Yn * ((L + 16) / 116 )^3 */ - int t = (brightness*4 + 16*1024 + 58)/116; - brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000); - } - - gpio_set_value(S3C64XX_GPB(4), brightness); - - return brightness; -} - -static void hmt_bl_exit(struct device *dev) -{ - gpio_free(S3C64XX_GPB(4)); -} - -static struct platform_pwm_backlight_data hmt_backlight_data = { - .pwm_id = 1, - .max_brightness = 100 * 256, - .dft_brightness = 40 * 256, - .pwm_period_ns = 1000000000 / (100 * 256 * 20), - .init = hmt_bl_init, - .notify = hmt_bl_notify, - .exit = hmt_bl_exit, - -}; - -static struct platform_device hmt_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &hmt_backlight_data, - }, -}; - -static struct s3c_fb_pd_win hmt_fb_win0 = { - .win_mode = { - .pixclock = 41094, - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 16, -}; - -/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ -static struct s3c_fb_platdata hmt_lcd_pdata __initdata = { - .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, - .win[0] = &hmt_fb_win0, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, -}; - -static struct mtd_partition hmt_nand_part[] = { - [0] = { - .name = "uboot", - .size = SZ_512K, - .offset = 0, - }, - [1] = { - .name = "uboot-env1", - .size = SZ_256K, - .offset = SZ_512K, - }, - [2] = { - .name = "uboot-env2", - .size = SZ_256K, - .offset = SZ_512K + SZ_256K, - }, - [3] = { - .name = "kernel", - .size = SZ_2M, - .offset = SZ_1M, - }, - [4] = { - .name = "rootfs", - .size = MTDPART_SIZ_FULL, - .offset = SZ_1M + SZ_2M, - }, -}; - -static struct s3c2410_nand_set hmt_nand_sets[] = { - [0] = { - .name = "nand", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(hmt_nand_part), - .partitions = hmt_nand_part, - }, -}; - -static struct s3c2410_platform_nand hmt_nand_info = { - .tacls = 25, - .twrph0 = 55, - .twrph1 = 40, - .nr_sets = ARRAY_SIZE(hmt_nand_sets), - .sets = hmt_nand_sets, -}; - -static struct gpio_led hmt_leds[] = { - { /* left function keys */ - .name = "left:blue", - .gpio = S3C64XX_GPO(12), - .default_trigger = "default-on", - }, - { /* right function keys - red */ - .name = "right:red", - .gpio = S3C64XX_GPO(13), - }, - { /* right function keys - green */ - .name = "right:green", - .gpio = S3C64XX_GPO(14), - }, - { /* right function keys - blue */ - .name = "right:blue", - .gpio = S3C64XX_GPO(15), - .default_trigger = "default-on", - }, -}; - -static struct gpio_led_platform_data hmt_led_data = { - .num_leds = ARRAY_SIZE(hmt_leds), - .leds = hmt_leds, -}; - -static struct platform_device hmt_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev.platform_data = &hmt_led_data, -}; - -static struct map_desc hmt_iodesc[] = {}; - -static struct platform_device *hmt_devices[] __initdata = { - &s3c_device_i2c0, - &s3c_device_nand, - &s3c_device_fb, - &s3c_device_usb, - &s3c_device_timer[1], - &hmt_backlight_device, - &hmt_leds_device, -}; - -static void __init hmt_map_io(void) -{ - s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); -} - -static void __init hmt_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_fb_set_platdata(&hmt_lcd_pdata); - s3c_nand_set_platdata(&hmt_nand_info); - - gpio_request(S3C64XX_GPC(7), "usb power"); - gpio_direction_output(S3C64XX_GPC(7), 0); - gpio_request(S3C64XX_GPM(0), "usb power"); - gpio_direction_output(S3C64XX_GPM(0), 1); - gpio_request(S3C64XX_GPK(7), "usb power"); - gpio_direction_output(S3C64XX_GPK(7), 1); - gpio_request(S3C64XX_GPF(13), "usb power"); - gpio_direction_output(S3C64XX_GPF(13), 1); - - platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices)); -} - -MACHINE_START(HMT, "Airgoo-HMT") - /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C64XX_PA_SDRAM + 0x100, - .init_irq = s3c6410_init_irq, - .map_io = hmt_map_io, - .init_machine = hmt_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c deleted file mode 100644 index 55e9bbf..0000000 --- a/arch/arm/mach-s3c6410/mach-ncp.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * linux/arch/arm/mach-s3c6410/mach-ncp.c - * - * Copyright (C) 2008-2009 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/fb.h> -#include <linux/gpio.h> -#include <linux/delay.h> - -#include <video/platform_lcd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/regs-fb.h> -#include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <plat/iic.h> -#include <plat/fb.h> - -#include <plat/s3c6410.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = { - /* REVISIT: NCP uses only serial 1, 2 */ - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, -}; - -static struct platform_device *ncp_devices[] __initdata = { - &s3c_device_hsmmc1, - &s3c_device_i2c0, -}; - -static struct map_desc ncp_iodesc[] __initdata = {}; - -static void __init ncp_map_io(void) -{ - s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); -} - -static void __init ncp_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - - platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices)); -} - -MACHINE_START(NCP, "NCP") - /* Maintainer: Samsung Electronics */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C64XX_PA_SDRAM + 0x100, - .init_irq = s3c6410_init_irq, - .map_io = ncp_map_io, - .init_machine = ncp_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c deleted file mode 100644 index 8969fe7..0000000 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ /dev/null @@ -1,457 +0,0 @@ -/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/fb.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/smsc911x.h> -#include <linux/regulator/fixed.h> - -#ifdef CONFIG_SMDK6410_WM1190_EV1 -#include <linux/mfd/wm8350/core.h> -#include <linux/mfd/wm8350/pmic.h> -#endif - -#include <video/platform_lcd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/regs-fb.h> -#include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <plat/regs-modem.h> -#include <plat/regs-gpio.h> -#include <plat/regs-sys.h> -#include <plat/iic.h> -#include <plat/fb.h> -#include <plat/gpio-cfg.h> - -#include <plat/s3c6410.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, -}; - -/* framebuffer and LCD setup. */ - -/* GPF15 = LCD backlight control - * GPF13 => Panel power - * GPN5 = LCD nRESET signal - * PWM_TOUT1 => backlight brightness - */ - -static void smdk6410_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { - gpio_direction_output(S3C64XX_GPF(13), 1); - gpio_direction_output(S3C64XX_GPF(15), 1); - - /* fire nRESET on power up */ - gpio_direction_output(S3C64XX_GPN(5), 0); - msleep(10); - gpio_direction_output(S3C64XX_GPN(5), 1); - msleep(1); - } else { - gpio_direction_output(S3C64XX_GPF(15), 0); - gpio_direction_output(S3C64XX_GPF(13), 0); - } -} - -static struct plat_lcd_data smdk6410_lcd_power_data = { - .set_power = smdk6410_lcd_power_set, -}; - -static struct platform_device smdk6410_lcd_powerdev = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdk6410_lcd_power_data, -}; - -static struct s3c_fb_pd_win smdk6410_fb_win0 = { - /* this is to ensure we use win0 */ - .win_mode = { - .pixclock = 41094, - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 16, -}; - -/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ -static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { - .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, - .win[0] = &smdk6410_fb_win0, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, -}; - -static struct resource smdk6410_smsc911x_resources[] = { - [0] = { - .start = 0x18000000, - .end = 0x18000000 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C_EINT(10), - .end = S3C_EINT(10), - .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW, - }, -}; - -static struct smsc911x_platform_config smdk6410_smsc911x_pdata = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - - -static struct platform_device smdk6410_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources), - .resource = &smdk6410_smsc911x_resources[0], - .dev = { - .platform_data = &smdk6410_smsc911x_pdata, - }, -}; - -#ifdef CONFIG_REGULATOR -static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { - { - /* WM8580 */ - .supply = "PVDD", - .dev_name = "0-001b", - }, - { - /* WM8580 */ - .supply = "AVDD", - .dev_name = "0-001b", - }, -}; - -static struct regulator_init_data smdk6410_b_pwr_5v_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers), - .consumer_supplies = smdk6410_b_pwr_5v_consumers, -}; - -static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { - .supply_name = "B_PWR_5V", - .microvolts = 5000000, - .init_data = &smdk6410_b_pwr_5v_data, - .gpio = -EINVAL, -}; - -static struct platform_device smdk6410_b_pwr_5v = { - .name = "reg-fixed-voltage", - .id = -1, - .dev = { - .platform_data = &smdk6410_b_pwr_5v_pdata, - }, -}; -#endif - -static struct map_desc smdk6410_iodesc[] = {}; - -static struct platform_device *smdk6410_devices[] __initdata = { -#ifdef CONFIG_SMDK6410_SD_CH0 - &s3c_device_hsmmc0, -#endif -#ifdef CONFIG_SMDK6410_SD_CH1 - &s3c_device_hsmmc1, -#endif - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_fb, - &s3c_device_usb, - &s3c_device_usb_hsotg, - -#ifdef CONFIG_REGULATOR - &smdk6410_b_pwr_5v, -#endif - &smdk6410_lcd_powerdev, - - &smdk6410_smsc911x, -}; - -#ifdef CONFIG_SMDK6410_WM1190_EV1 -/* S3C64xx internal logic & PLL */ -static struct regulator_init_data wm8350_dcdc1_data = { - .constraints = { - .name = "PVDD_INT/PVDD_PLL", - .min_uV = 1200000, - .max_uV = 1200000, - .always_on = 1, - .apply_uV = 1, - }, -}; - -/* Memory */ -static struct regulator_init_data wm8350_dcdc3_data = { - .constraints = { - .name = "PVDD_MEM", - .min_uV = 1800000, - .max_uV = 1800000, - .always_on = 1, - .state_mem = { - .uV = 1800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, - }, -}; - -/* USB, EXT, PCM, ADC/DAC, USB, MMC */ -static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { - { - /* WM8580 */ - .supply = "DVDD", - .dev_name = "0-001b", - }, -}; - -static struct regulator_init_data wm8350_dcdc4_data = { - .constraints = { - .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV", - .min_uV = 3000000, - .max_uV = 3000000, - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers), - .consumer_supplies = wm8350_dcdc4_consumers, -}; - -/* ARM core */ -static struct regulator_consumer_supply dcdc6_consumers[] = { - { - .supply = "vddarm", - } -}; - -static struct regulator_init_data wm8350_dcdc6_data = { - .constraints = { - .name = "PVDD_ARM", - .min_uV = 1000000, - .max_uV = 1300000, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers), - .consumer_supplies = dcdc6_consumers, -}; - -/* Alive */ -static struct regulator_init_data wm8350_ldo1_data = { - .constraints = { - .name = "PVDD_ALIVE", - .min_uV = 1200000, - .max_uV = 1200000, - .always_on = 1, - .apply_uV = 1, - }, -}; - -/* OTG */ -static struct regulator_init_data wm8350_ldo2_data = { - .constraints = { - .name = "PVDD_OTG", - .min_uV = 3300000, - .max_uV = 3300000, - .always_on = 1, - }, -}; - -/* LCD */ -static struct regulator_init_data wm8350_ldo3_data = { - .constraints = { - .name = "PVDD_LCD", - .min_uV = 3000000, - .max_uV = 3000000, - .always_on = 1, - }, -}; - -/* OTGi/1190-EV1 HPVDD & AVDD */ -static struct regulator_init_data wm8350_ldo4_data = { - .constraints = { - .name = "PVDD_OTGI/HPVDD/AVDD", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct { - int regulator; - struct regulator_init_data *initdata; -} wm1190_regulators[] = { - { WM8350_DCDC_1, &wm8350_dcdc1_data }, - { WM8350_DCDC_3, &wm8350_dcdc3_data }, - { WM8350_DCDC_4, &wm8350_dcdc4_data }, - { WM8350_DCDC_6, &wm8350_dcdc6_data }, - { WM8350_LDO_1, &wm8350_ldo1_data }, - { WM8350_LDO_2, &wm8350_ldo2_data }, - { WM8350_LDO_3, &wm8350_ldo3_data }, - { WM8350_LDO_4, &wm8350_ldo4_data }, -}; - -static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) -{ - int i; - - /* Configure the IRQ line */ - s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP); - - /* Instantiate the regulators */ - for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++) - wm8350_register_regulator(wm8350, - wm1190_regulators[i].regulator, - wm1190_regulators[i].initdata); - - return 0; -} - -static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = { - .init = smdk6410_wm8350_init, - .irq_high = 1, -}; -#endif - -static struct i2c_board_info i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("wm8580", 0x1b), }, - -#ifdef CONFIG_SMDK6410_WM1190_EV1 - { I2C_BOARD_INFO("wm8350", 0x1a), - .platform_data = &smdk6410_wm8350_pdata, - .irq = S3C_EINT(12), - }, -#endif -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ -}; - -static void __init smdk6410_map_io(void) -{ - u32 tmp; - - s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); - - /* set the LCD type */ - - tmp = __raw_readl(S3C64XX_SPCON); - tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; - tmp |= S3C64XX_SPCON_LCD_SEL_RGB; - __raw_writel(tmp, S3C64XX_SPCON); - - /* remove the lcd bypass */ - tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); - tmp &= ~MIFPCON_LCD_BYPASS; - __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); -} - -static void __init smdk6410_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - s3c_fb_set_platdata(&smdk6410_lcd_pdata); - - gpio_request(S3C64XX_GPN(5), "LCD power"); - gpio_request(S3C64XX_GPF(13), "LCD power"); - gpio_request(S3C64XX_GPF(15), "LCD power"); - - i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices)); -} - -MACHINE_START(SMDK6410, "SMDK6410") - /* Maintainer: Ben Dooks <ben@fluff.org> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C64XX_PA_SDRAM + 0x100, - - .init_irq = s3c6410_init_irq, - .map_io = smdk6410_map_io, - .init_machine = smdk6410_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c deleted file mode 100644 index 816d2d9..0000000 --- a/arch/arm/mach-s3c6410/setup-sdhci.c +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s3c6410/setup-sdhci.c - * - * Copyright 2008 Simtec Electronics - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s3c6410_hsmmc_clksrcs[4] = { - [0] = "hsmmc", - [1] = "hsmmc", - [2] = "mmc_bus", - /* [3] = "48m", - note not successfully used yet */ -}; - - -void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything acording to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} - |